freebsd-skq/sys/dev/ofw/ofw_bus_subr.c
nwhitehorn c757ee90ae Provide for multiple, cascaded PICs on PowerPC systems, and extend the
OFW interrupt map interface to also return the device's interrupt parent.

MFC after:	8.1-RELEASE
2010-06-18 14:06:27 +00:00

317 lines
8.5 KiB
C

/*-
* Copyright (c) 2001 - 2003 by Thomas Moestl <tmm@FreeBSD.org>.
* Copyright (c) 2005 Marius Strobl <marius@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_platform.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/errno.h>
#include <sys/libkern.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <dev/ofw/openfirm.h>
#include "ofw_bus_if.h"
int
ofw_bus_gen_setup_devinfo(struct ofw_bus_devinfo *obd, phandle_t node)
{
if (obd == NULL)
return (ENOMEM);
/* The 'name' property is considered mandatory. */
if ((OF_getprop_alloc(node, "name", 1, (void **)&obd->obd_name)) == -1)
return (EINVAL);
OF_getprop_alloc(node, "compatible", 1, (void **)&obd->obd_compat);
OF_getprop_alloc(node, "device_type", 1, (void **)&obd->obd_type);
OF_getprop_alloc(node, "model", 1, (void **)&obd->obd_model);
obd->obd_node = node;
return (0);
}
void
ofw_bus_gen_destroy_devinfo(struct ofw_bus_devinfo *obd)
{
if (obd == NULL)
return;
if (obd->obd_compat != NULL)
free(obd->obd_compat, M_OFWPROP);
if (obd->obd_model != NULL)
free(obd->obd_model, M_OFWPROP);
if (obd->obd_name != NULL)
free(obd->obd_name, M_OFWPROP);
if (obd->obd_type != NULL)
free(obd->obd_type, M_OFWPROP);
}
int
ofw_bus_gen_child_pnpinfo_str(device_t cbdev, device_t child, char *buf,
size_t buflen)
{
if (ofw_bus_get_name(child) != NULL) {
strlcat(buf, "name=", buflen);
strlcat(buf, ofw_bus_get_name(child), buflen);
}
if (ofw_bus_get_compat(child) != NULL) {
strlcat(buf, " compat=", buflen);
strlcat(buf, ofw_bus_get_compat(child), buflen);
}
return (0);
};
const char *
ofw_bus_gen_get_compat(device_t bus, device_t dev)
{
const struct ofw_bus_devinfo *obd;
obd = OFW_BUS_GET_DEVINFO(bus, dev);
if (obd == NULL)
return (NULL);
return (obd->obd_compat);
}
const char *
ofw_bus_gen_get_model(device_t bus, device_t dev)
{
const struct ofw_bus_devinfo *obd;
obd = OFW_BUS_GET_DEVINFO(bus, dev);
if (obd == NULL)
return (NULL);
return (obd->obd_model);
}
const char *
ofw_bus_gen_get_name(device_t bus, device_t dev)
{
const struct ofw_bus_devinfo *obd;
obd = OFW_BUS_GET_DEVINFO(bus, dev);
if (obd == NULL)
return (NULL);
return (obd->obd_name);
}
phandle_t
ofw_bus_gen_get_node(device_t bus, device_t dev)
{
const struct ofw_bus_devinfo *obd;
obd = OFW_BUS_GET_DEVINFO(bus, dev);
if (obd == NULL)
return (0);
return (obd->obd_node);
}
const char *
ofw_bus_gen_get_type(device_t bus, device_t dev)
{
const struct ofw_bus_devinfo *obd;
obd = OFW_BUS_GET_DEVINFO(bus, dev);
if (obd == NULL)
return (NULL);
return (obd->obd_type);
}
int
ofw_bus_is_compatible(device_t dev, const char *onecompat)
{
phandle_t node;
const char *compat;
int len, onelen, l;
if ((compat = ofw_bus_get_compat(dev)) == NULL)
return (0);
if ((node = ofw_bus_get_node(dev)) == 0)
return (0);
/* Get total 'compatible' prop len */
if ((len = OF_getproplen(node, "compatible")) <= 0)
return (0);
onelen = strlen(onecompat);
while (len > 0) {
if (strncasecmp(compat, onecompat, onelen) == 0)
/* Found it. */
return (1);
/* Slide to the next sub-string. */
l = strlen(compat) + 1;
compat += l;
len -= l;
}
return (0);
}
int
ofw_bus_is_compatible_strict(device_t dev, const char *compatible)
{
const char *compat;
if ((compat = ofw_bus_get_compat(dev)) == NULL)
return (0);
if (strncasecmp(compat, compatible, strlen(compatible)) == 0)
return (1);
return (0);
}
#ifndef FDT
void
ofw_bus_setup_iinfo(phandle_t node, struct ofw_bus_iinfo *ii, int intrsz)
{
pcell_t addrc;
int msksz;
if (OF_getprop(node, "#address-cells", &addrc, sizeof(addrc)) == -1)
addrc = 2;
ii->opi_addrc = addrc * sizeof(pcell_t);
ii->opi_imapsz = OF_getprop_alloc(node, "interrupt-map", 1,
(void **)&ii->opi_imap);
if (ii->opi_imapsz > 0) {
msksz = OF_getprop_alloc(node, "interrupt-map-mask", 1,
(void **)&ii->opi_imapmsk);
/*
* Failure to get the mask is ignored; a full mask is used
* then. We barf on bad mask sizes, however.
*/
if (msksz != -1 && msksz != ii->opi_addrc + intrsz)
panic("ofw_bus_setup_iinfo: bad interrupt-map-mask "
"property!");
}
}
int
ofw_bus_lookup_imap(phandle_t node, struct ofw_bus_iinfo *ii, void *reg,
int regsz, void *pintr, int pintrsz, void *mintr, int mintrsz,
phandle_t *iparent, void *maskbuf)
{
int rv;
if (ii->opi_imapsz <= 0)
return (0);
KASSERT(regsz >= ii->opi_addrc,
("ofw_bus_lookup_imap: register size too small: %d < %d",
regsz, ii->opi_addrc));
rv = OF_getprop(node, "reg", reg, regsz);
if (rv < regsz)
panic("ofw_bus_lookup_imap: could not get reg property");
return (ofw_bus_search_intrmap(pintr, pintrsz, reg, ii->opi_addrc,
ii->opi_imap, ii->opi_imapsz, ii->opi_imapmsk, maskbuf, mintr,
mintrsz, iparent));
}
/*
* Map an interrupt using the firmware reg, interrupt-map and
* interrupt-map-mask properties.
* The interrupt property to be mapped must be of size intrsz, and pointed to
* by intr. The regs property of the node for which the mapping is done must
* be passed as regs. This property is an array of register specifications;
* the size of the address part of such a specification must be passed as
* physsz. Only the first element of the property is used.
* imap and imapsz hold the interrupt mask and it's size.
* imapmsk is a pointer to the interrupt-map-mask property, which must have
* a size of physsz + intrsz; it may be NULL, in which case a full mask is
* assumed.
* maskbuf must point to a buffer of length physsz + intrsz.
* The interrupt is returned in result, which must point to a buffer of length
* rintrsz (which gives the expected size of the mapped interrupt).
* Returns 1 if a mapping was found, 0 otherwise.
*/
int
ofw_bus_search_intrmap(void *intr, int intrsz, void *regs, int physsz,
void *imap, int imapsz, void *imapmsk, void *maskbuf, void *result,
int rintrsz, phandle_t *iparent)
{
phandle_t parent;
uint8_t *ref = maskbuf;
uint8_t *uiintr = intr;
uint8_t *uiregs = regs;
uint8_t *uiimapmsk = imapmsk;
uint8_t *mptr;
pcell_t pintrsz;
int i, rsz, tsz;
rsz = -1;
if (imapmsk != NULL) {
for (i = 0; i < physsz; i++)
ref[i] = uiregs[i] & uiimapmsk[i];
for (i = 0; i < intrsz; i++)
ref[physsz + i] = uiintr[i] & uiimapmsk[physsz + i];
} else {
bcopy(regs, ref, physsz);
bcopy(intr, ref + physsz, intrsz);
}
mptr = imap;
i = imapsz;
while (i > 0) {
bcopy(mptr + physsz + intrsz, &parent, sizeof(parent));
if (OF_searchprop(parent, "#interrupt-cells",
&pintrsz, sizeof(pintrsz)) == -1)
pintrsz = 1; /* default */
pintrsz *= sizeof(pcell_t);
/* Compute the map stride size. */
tsz = physsz + intrsz + sizeof(phandle_t) + pintrsz;
KASSERT(i >= tsz, ("ofw_bus_search_intrmap: truncated map"));
/*
* XXX: Apple hardware uses a second cell to set information
* on the interrupt trigger type. This information should
* be used somewhere to program the PIC.
*/
if (bcmp(ref, mptr, physsz + intrsz) == 0) {
bcopy(mptr + physsz + intrsz + sizeof(parent),
result, rintrsz);
if (iparent != NULL)
*iparent = parent;
return (1);
}
mptr += tsz;
i -= tsz;
}
return (0);
}
#endif /* !FDT */