b3819a3c48
whenever the link state is changed. Using software based polling for media status tracking is known to cause MII access failure under certain conditions once link is established so vge(4) used to rely on link status change interrupt. However DEVICE_POLLING completely disables generation of all kind of interrupts on vge(4) such that this resulted in not detecting link state change event. This means vge(4) does not correctly detect established/lost link with DEVICE_POLLING. Losing the interrupt made vge(4) not to send any packets to peer since vge(4) does not try to send any packets when there is no established link. Work around the issue by generating link state change interrupt with DEVICE_POLLING. PR: kern/160442 Approved by: re (kib)
781 lines
32 KiB
C
781 lines
32 KiB
C
/*-
|
|
* Copyright (c) 2004
|
|
* Bill Paul <wpaul@windriver.com>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Bill Paul.
|
|
* 4. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* Register definitions for the VIA VT6122 gigabit ethernet controller.
|
|
* Definitions for the built-in copper PHY can be found in vgphy.h.
|
|
*
|
|
* The VT612x controllers have 256 bytes of register space. The
|
|
* manual seems to imply that the registers should all be accessed
|
|
* using 32-bit I/O cycles, but some of them are less than 32 bits
|
|
* wide. Go figure.
|
|
*/
|
|
|
|
#ifndef _IF_VGEREG_H_
|
|
#define _IF_VGEREG_H_
|
|
|
|
#define VIA_VENDORID 0x1106
|
|
#define VIA_DEVICEID_61XX 0x3119
|
|
|
|
#define VGE_PAR0 0x00 /* physical address register */
|
|
#define VGE_PAR1 0x02
|
|
#define VGE_PAR2 0x04
|
|
#define VGE_RXCTL 0x06 /* RX control register */
|
|
#define VGE_TXCTL 0x07 /* TX control register */
|
|
#define VGE_CRS0 0x08 /* Global cmd register 0 (w to set) */
|
|
#define VGE_CRS1 0x09 /* Global cmd register 1 (w to set) */
|
|
#define VGE_CRS2 0x0A /* Global cmd register 2 (w to set) */
|
|
#define VGE_CRS3 0x0B /* Global cmd register 3 (w to set) */
|
|
#define VGE_CRC0 0x0C /* Global cmd register 0 (w to clr) */
|
|
#define VGE_CRC1 0x0D /* Global cmd register 1 (w to clr) */
|
|
#define VGE_CRC2 0x0E /* Global cmd register 2 (w to clr) */
|
|
#define VGE_CRC3 0x0F /* Global cmd register 3 (w to clr) */
|
|
#define VGE_MAR0 0x10 /* Mcast hash/CAM register 0 */
|
|
#define VGE_MAR1 0x14 /* Mcast hash/CAM register 1 */
|
|
#define VGE_CAM0 0x10
|
|
#define VGE_CAM1 0x11
|
|
#define VGE_CAM2 0x12
|
|
#define VGE_CAM3 0x13
|
|
#define VGE_CAM4 0x14
|
|
#define VGE_CAM5 0x15
|
|
#define VGE_CAM6 0x16
|
|
#define VGE_CAM7 0x17
|
|
#define VGE_TXDESC_HIADDR 0x18 /* Hi part of 64bit txdesc base addr */
|
|
#define VGE_DATABUF_HIADDR 0x1D /* Hi part of 64bit data buffer addr */
|
|
#define VGE_INTCTL0 0x20 /* interrupt control register */
|
|
#define VGE_RXSUPPTHR 0x20
|
|
#define VGE_TXSUPPTHR 0x20
|
|
#define VGE_INTHOLDOFF 0x20
|
|
#define VGE_INTCTL1 0x21 /* interrupt control register */
|
|
#define VGE_TXHOSTERR 0x22 /* TX host error status */
|
|
#define VGE_RXHOSTERR 0x23 /* RX host error status */
|
|
#define VGE_ISR 0x24 /* Interrupt status register */
|
|
#define VGE_IMR 0x28 /* Interrupt mask register */
|
|
#define VGE_TXSTS_PORT 0x2C /* Transmit status port (???) */
|
|
#define VGE_TXQCSRS 0x30 /* TX queue ctl/status set */
|
|
#define VGE_RXQCSRS 0x32 /* RX queue ctl/status set */
|
|
#define VGE_TXQCSRC 0x34 /* TX queue ctl/status clear */
|
|
#define VGE_RXQCSRC 0x36 /* RX queue ctl/status clear */
|
|
#define VGE_RXDESC_ADDR_LO 0x38 /* RX desc base addr (lo 32 bits) */
|
|
#define VGE_RXDESC_CONSIDX 0x3C /* Current RX descriptor index */
|
|
#define VGE_TXQTIMER 0x3E /* TX queue timer pend register */
|
|
#define VGE_RXQTIMER 0x3F /* RX queue timer pend register */
|
|
#define VGE_TXDESC_ADDR_LO0 0x40 /* TX desc0 base addr (lo 32 bits) */
|
|
#define VGE_TXDESC_ADDR_LO1 0x44 /* TX desc1 base addr (lo 32 bits) */
|
|
#define VGE_TXDESC_ADDR_LO2 0x48 /* TX desc2 base addr (lo 32 bits) */
|
|
#define VGE_TXDESC_ADDR_LO3 0x4C /* TX desc3 base addr (lo 32 bits) */
|
|
#define VGE_RXDESCNUM 0x50 /* Size of RX desc ring */
|
|
#define VGE_TXDESCNUM 0x52 /* Size of TX desc ring */
|
|
#define VGE_TXDESC_CONSIDX0 0x54 /* Current TX descriptor index */
|
|
#define VGE_TXDESC_CONSIDX1 0x56 /* Current TX descriptor index */
|
|
#define VGE_TXDESC_CONSIDX2 0x58 /* Current TX descriptor index */
|
|
#define VGE_TXDESC_CONSIDX3 0x5A /* Current TX descriptor index */
|
|
#define VGE_TX_PAUSE_TIMER 0x5C /* TX pause frame timer */
|
|
#define VGE_RXDESC_RESIDUECNT 0x5E /* RX descriptor residue count */
|
|
#define VGE_FIFOTEST0 0x60 /* FIFO test register */
|
|
#define VGE_FIFOTEST1 0x64 /* FIFO test register */
|
|
#define VGE_CAMADDR 0x68 /* CAM address register */
|
|
#define VGE_CAMCTL 0x69 /* CAM control register */
|
|
#define VGE_GFTEST 0x6A
|
|
#define VGE_FTSCMD 0x6B
|
|
#define VGE_MIICFG 0x6C /* MII port config register */
|
|
#define VGE_MIISTS 0x6D /* MII port status register */
|
|
#define VGE_PHYSTS0 0x6E /* PHY status register */
|
|
#define VGE_PHYSTS1 0x6F /* PHY status register */
|
|
#define VGE_MIICMD 0x70 /* MII command register */
|
|
#define VGE_MIIADDR 0x71 /* MII address register */
|
|
#define VGE_MIIDATA 0x72 /* MII data register */
|
|
#define VGE_SSTIMER 0x74 /* single-shot timer */
|
|
#define VGE_PTIMER 0x76 /* periodic timer */
|
|
#define VGE_CHIPCFG0 0x78 /* chip config A */
|
|
#define VGE_CHIPCFG1 0x79 /* chip config B */
|
|
#define VGE_CHIPCFG2 0x7A /* chip config C */
|
|
#define VGE_CHIPCFG3 0x7B /* chip config D */
|
|
#define VGE_DMACFG0 0x7C /* DMA config 0 */
|
|
#define VGE_DMACFG1 0x7D /* DMA config 1 */
|
|
#define VGE_RXCFG 0x7E /* MAC RX config */
|
|
#define VGE_TXCFG 0x7F /* MAC TX config */
|
|
#define VGE_PWRMGMT 0x82 /* power management shadow register */
|
|
#define VGE_PWRSTAT 0x83 /* power state shadow register */
|
|
#define VGE_MIBCSR 0x84 /* MIB control/status register */
|
|
#define VGE_SWEEDATA 0x85 /* EEPROM software loaded data */
|
|
#define VGE_MIBDATA 0x88 /* MIB data register */
|
|
#define VGE_EEWRDAT 0x8C /* EEPROM embedded write */
|
|
#define VGE_EECSUM 0x92 /* EEPROM checksum */
|
|
#define VGE_EECSR 0x93 /* EEPROM control/status */
|
|
#define VGE_EERDDAT 0x94 /* EEPROM embedded read */
|
|
#define VGE_EEADDR 0x96 /* EEPROM address */
|
|
#define VGE_EECMD 0x97 /* EEPROM embedded command */
|
|
#define VGE_CHIPSTRAP 0x99 /* Chip jumper strapping status */
|
|
#define VGE_MEDIASTRAP 0x9B /* Media jumper strapping */
|
|
#define VGE_DIAGSTS 0x9C /* Chip diagnostic status */
|
|
#define VGE_DBGCTL 0x9E /* Chip debug control */
|
|
#define VGE_DIAGCTL 0x9F /* Chip diagnostic control */
|
|
#define VGE_WOLCR0S 0xA0 /* WOL0 event set */
|
|
#define VGE_WOLCR1S 0xA1 /* WOL1 event set */
|
|
#define VGE_PWRCFGS 0xA2 /* Power management config set */
|
|
#define VGE_WOLCFGS 0xA3 /* WOL config set */
|
|
#define VGE_WOLCR0C 0xA4 /* WOL0 event clear */
|
|
#define VGE_WOLCR1C 0xA5 /* WOL1 event clear */
|
|
#define VGE_PWRCFGC 0xA6 /* Power management config clear */
|
|
#define VGE_WOLCFGC 0xA7 /* WOL config clear */
|
|
#define VGE_WOLSR0S 0xA8 /* WOL status set */
|
|
#define VGE_WOLSR1S 0xA9 /* WOL status set */
|
|
#define VGE_WOLSR0C 0xAC /* WOL status clear */
|
|
#define VGE_WOLSR1C 0xAD /* WOL status clear */
|
|
#define VGE_WAKEPAT_CRC0 0xB0
|
|
#define VGE_WAKEPAT_CRC1 0xB2
|
|
#define VGE_WAKEPAT_CRC2 0xB4
|
|
#define VGE_WAKEPAT_CRC3 0xB6
|
|
#define VGE_WAKEPAT_CRC4 0xB8
|
|
#define VGE_WAKEPAT_CRC5 0xBA
|
|
#define VGE_WAKEPAT_CRC6 0xBC
|
|
#define VGE_WAKEPAT_CRC7 0xBE
|
|
#define VGE_WAKEPAT_MSK0_0 0xC0
|
|
#define VGE_WAKEPAT_MSK0_1 0xC4
|
|
#define VGE_WAKEPAT_MSK0_2 0xC8
|
|
#define VGE_WAKEPAT_MSK0_3 0xCC
|
|
#define VGE_WAKEPAT_MSK1_0 0xD0
|
|
#define VGE_WAKEPAT_MSK1_1 0xD4
|
|
#define VGE_WAKEPAT_MSK1_2 0xD8
|
|
#define VGE_WAKEPAT_MSK1_3 0xDC
|
|
#define VGE_WAKEPAT_MSK2_0 0xE0
|
|
#define VGE_WAKEPAT_MSK2_1 0xE4
|
|
#define VGE_WAKEPAT_MSK2_2 0xE8
|
|
#define VGE_WAKEPAT_MSK2_3 0xEC
|
|
#define VGE_WAKEPAT_MSK3_0 0xF0
|
|
#define VGE_WAKEPAT_MSK3_1 0xF4
|
|
#define VGE_WAKEPAT_MSK3_2 0xF8
|
|
#define VGE_WAKEPAT_MSK3_3 0xFC
|
|
|
|
/* Receive control register */
|
|
|
|
#define VGE_RXCTL_RX_BADFRAMES 0x01 /* accept CRC error frames */
|
|
#define VGE_RXCTL_RX_RUNT 0x02 /* accept runts */
|
|
#define VGE_RXCTL_RX_MCAST 0x04 /* accept multicasts */
|
|
#define VGE_RXCTL_RX_BCAST 0x08 /* accept broadcasts */
|
|
#define VGE_RXCTL_RX_PROMISC 0x10 /* promisc mode */
|
|
#define VGE_RXCTL_RX_GIANT 0x20 /* accept VLAN tagged frames */
|
|
#define VGE_RXCTL_RX_UCAST 0x40 /* use perfect filtering */
|
|
#define VGE_RXCTL_RX_SYMERR 0x80 /* accept symbol err packet */
|
|
|
|
/* Transmit control register */
|
|
|
|
#define VGE_TXCTL_LOOPCTL 0x03 /* loopback control */
|
|
#define VGE_TXCTL_COLLCTL 0x0C /* collision retry control */
|
|
|
|
#define VGE_TXLOOPCTL_OFF 0x00
|
|
#define VGE_TXLOOPCTL_MAC_INTERNAL 0x01
|
|
#define VGE_TXLOOPCTL_EXTERNAL 0x02
|
|
|
|
#define VGE_TXCOLLS_NORMAL 0x00 /* one set of 16 retries */
|
|
#define VGE_TXCOLLS_32 0x04 /* two sets of 16 retries */
|
|
#define VGE_TXCOLLS_48 0x08 /* three sets of 16 retries */
|
|
#define VGE_TXCOLLS_INFINITE 0x0C /* retry forever */
|
|
|
|
/* Global command register 0 */
|
|
|
|
#define VGE_CR0_START 0x01 /* start NIC */
|
|
#define VGE_CR0_STOP 0x02 /* stop NIC */
|
|
#define VGE_CR0_RX_ENABLE 0x04 /* turn on RX engine */
|
|
#define VGE_CR0_TX_ENABLE 0x08 /* turn on TX engine */
|
|
|
|
/* Global command register 1 */
|
|
|
|
#define VGE_CR1_NOUCAST 0x01 /* disable unicast reception */
|
|
#define VGE_CR1_NOPOLL 0x08 /* disable RX/TX desc polling */
|
|
#define VGE_CR1_TIMER0_ENABLE 0x20 /* enable single shot timer */
|
|
#define VGE_CR1_TIMER1_ENABLE 0x40 /* enable periodic timer */
|
|
#define VGE_CR1_SOFTRESET 0x80 /* software reset */
|
|
|
|
/* Global command register 2 */
|
|
|
|
#define VGE_CR2_TXPAUSE_THRESH_LO 0x03 /* TX pause frame lo threshold */
|
|
#define VGE_CR2_TXPAUSE_THRESH_HI 0x0C /* TX pause frame hi threshold */
|
|
#define VGE_CR2_HDX_FLOWCTL_ENABLE 0x10 /* half duplex flow control */
|
|
#define VGE_CR2_FDX_RXFLOWCTL_ENABLE 0x20 /* full duplex RX flow control */
|
|
#define VGE_CR2_FDX_TXFLOWCTL_ENABLE 0x40 /* full duplex TX flow control */
|
|
#define VGE_CR2_XON_ENABLE 0x80 /* 802.3x XON/XOFF flow control */
|
|
|
|
/* Global command register 3 */
|
|
|
|
#define VGE_CR3_INT_SWPEND 0x01 /* disable multi-level int bits */
|
|
#define VGE_CR3_INT_GMSK 0x02 /* mask off all interrupts */
|
|
#define VGE_CR3_INT_HOLDOFF 0x04 /* enable int hold off timer */
|
|
#define VGE_CR3_DIAG 0x10 /* diagnostic enabled */
|
|
#define VGE_CR3_PHYRST 0x20 /* assert PHYRSTZ */
|
|
#define VGE_CR3_STOP_FORCE 0x40 /* force NIC to stopped state */
|
|
|
|
/* Interrupt control register */
|
|
|
|
#define VGE_INTCTL_SC_RELOAD 0x01 /* reload hold timer */
|
|
#define VGE_INTCTL_HC_RELOAD 0x02 /* enable hold timer reload */
|
|
#define VGE_INTCTL_STATUS 0x04 /* interrupt pending status */
|
|
#define VGE_INTCTL_MASK 0x18 /* multilayer int mask */
|
|
#define VGE_INTCTL_RXINTSUP_DISABLE 0x20 /* disable RX int supression */
|
|
#define VGE_INTCTL_TXINTSUP_DISABLE 0x40 /* disable TX int supression */
|
|
#define VGE_INTCTL_SOFTINT 0x80 /* request soft interrupt */
|
|
|
|
#define VGE_INTMASK_LAYER0 0x00
|
|
#define VGE_INTMASK_LAYER1 0x08
|
|
#define VGE_INTMASK_ALL 0x10
|
|
#define VGE_INTMASK_ALL2 0x18
|
|
|
|
/* Transmit host error status register */
|
|
|
|
#define VGE_TXHOSTERR_TDSTRUCT 0x01 /* bad TX desc structure */
|
|
#define VGE_TXHOSTERR_TDFETCH_BUSERR 0x02 /* bus error on desc fetch */
|
|
#define VGE_TXHOSTERR_TDWBACK_BUSERR 0x04 /* bus error on desc writeback */
|
|
#define VGE_TXHOSTERR_FIFOERR 0x08 /* TX FIFO DMA bus error */
|
|
|
|
/* Receive host error status register */
|
|
|
|
#define VGE_RXHOSTERR_RDSTRUCT 0x01 /* bad RX desc structure */
|
|
#define VGE_RXHOSTERR_RDFETCH_BUSERR 0x02 /* bus error on desc fetch */
|
|
#define VGE_RXHOSTERR_RDWBACK_BUSERR 0x04 /* bus error on desc writeback */
|
|
#define VGE_RXHOSTERR_FIFOERR 0x08 /* RX FIFO DMA bus error */
|
|
|
|
/* Interrupt status register */
|
|
|
|
#define VGE_ISR_RXOK_HIPRIO 0x00000001 /* hi prio RX int */
|
|
#define VGE_ISR_TXOK_HIPRIO 0x00000002 /* hi prio TX int */
|
|
#define VGE_ISR_RXOK 0x00000004 /* normal RX done */
|
|
#define VGE_ISR_TXOK 0x00000008 /* combo results for next 4 bits */
|
|
#define VGE_ISR_TXOK0 0x00000010 /* TX complete on queue 0 */
|
|
#define VGE_ISR_TXOK1 0x00000020 /* TX complete on queue 1 */
|
|
#define VGE_ISR_TXOK2 0x00000040 /* TX complete on queue 2 */
|
|
#define VGE_ISR_TXOK3 0x00000080 /* TX complete on queue 3 */
|
|
#define VGE_ISR_RXCNTOFLOW 0x00000400 /* RX packet count overflow */
|
|
#define VGE_ISR_RXPAUSE 0x00000800 /* pause frame RX'ed */
|
|
#define VGE_ISR_RXOFLOW 0x00001000 /* RX FIFO overflow */
|
|
#define VGE_ISR_RXNODESC 0x00002000 /* ran out of RX descriptors */
|
|
#define VGE_ISR_RXNODESC_WARN 0x00004000 /* running out of RX descs */
|
|
#define VGE_ISR_LINKSTS 0x00008000 /* link status change */
|
|
#define VGE_ISR_TIMER0 0x00010000 /* one shot timer expired */
|
|
#define VGE_ISR_TIMER1 0x00020000 /* periodic timer expired */
|
|
#define VGE_ISR_PWR 0x00040000 /* wake up power event */
|
|
#define VGE_ISR_PHYINT 0x00080000 /* PHY interrupt */
|
|
#define VGE_ISR_STOPPED 0x00100000 /* software shutdown complete */
|
|
#define VGE_ISR_MIBOFLOW 0x00200000 /* MIB counter overflow warning */
|
|
#define VGE_ISR_SOFTINT 0x00400000 /* software interrupt */
|
|
#define VGE_ISR_HOLDOFF_RELOAD 0x00800000 /* reload hold timer */
|
|
#define VGE_ISR_RXDMA_STALL 0x01000000 /* RX DMA stall */
|
|
#define VGE_ISR_TXDMA_STALL 0x02000000 /* TX DMA STALL */
|
|
#define VGE_ISR_ISRC0 0x10000000 /* interrupt source indication */
|
|
#define VGE_ISR_ISRC1 0x20000000 /* interrupt source indication */
|
|
#define VGE_ISR_ISRC2 0x40000000 /* interrupt source indication */
|
|
#define VGE_ISR_ISRC3 0x80000000 /* interrupt source indication */
|
|
|
|
#define VGE_INTRS (VGE_ISR_TXOK0|VGE_ISR_RXOK|VGE_ISR_STOPPED| \
|
|
VGE_ISR_RXOFLOW|VGE_ISR_PHYINT| \
|
|
VGE_ISR_LINKSTS|VGE_ISR_RXNODESC| \
|
|
VGE_ISR_RXDMA_STALL|VGE_ISR_TXDMA_STALL)
|
|
|
|
#define VGE_INTRS_POLLING (VGE_ISR_PHYINT|VGE_ISR_LINKSTS)
|
|
|
|
/* Interrupt mask register */
|
|
|
|
#define VGE_IMR_RXOK_HIPRIO 0x00000001 /* hi prio RX int */
|
|
#define VGE_IMR_TXOK_HIPRIO 0x00000002 /* hi prio TX int */
|
|
#define VGE_IMR_RXOK 0x00000004 /* normal RX done */
|
|
#define VGE_IMR_TXOK 0x00000008 /* combo results for next 4 bits */
|
|
#define VGE_IMR_TXOK0 0x00000010 /* TX complete on queue 0 */
|
|
#define VGE_IMR_TXOK1 0x00000020 /* TX complete on queue 1 */
|
|
#define VGE_IMR_TXOK2 0x00000040 /* TX complete on queue 2 */
|
|
#define VGE_IMR_TXOK3 0x00000080 /* TX complete on queue 3 */
|
|
#define VGE_IMR_RXCNTOFLOW 0x00000400 /* RX packet count overflow */
|
|
#define VGE_IMR_RXPAUSE 0x00000800 /* pause frame RX'ed */
|
|
#define VGE_IMR_RXOFLOW 0x00001000 /* RX FIFO overflow */
|
|
#define VGE_IMR_RXNODESC 0x00002000 /* ran out of RX descriptors */
|
|
#define VGE_IMR_RXNODESC_WARN 0x00004000 /* running out of RX descs */
|
|
#define VGE_IMR_LINKSTS 0x00008000 /* link status change */
|
|
#define VGE_IMR_TIMER0 0x00010000 /* one shot timer expired */
|
|
#define VGE_IMR_TIMER1 0x00020000 /* periodic timer expired */
|
|
#define VGE_IMR_PWR 0x00040000 /* wake up power event */
|
|
#define VGE_IMR_PHYINT 0x00080000 /* PHY interrupt */
|
|
#define VGE_IMR_STOPPED 0x00100000 /* software shutdown complete */
|
|
#define VGE_IMR_MIBOFLOW 0x00200000 /* MIB counter overflow warning */
|
|
#define VGE_IMR_SOFTINT 0x00400000 /* software interrupt */
|
|
#define VGE_IMR_HOLDOFF_RELOAD 0x00800000 /* reload hold timer */
|
|
#define VGE_IMR_RXDMA_STALL 0x01000000 /* RX DMA stall */
|
|
#define VGE_IMR_TXDMA_STALL 0x02000000 /* TX DMA STALL */
|
|
#define VGE_IMR_ISRC0 0x10000000 /* interrupt source indication */
|
|
#define VGE_IMR_ISRC1 0x20000000 /* interrupt source indication */
|
|
#define VGE_IMR_ISRC2 0x40000000 /* interrupt source indication */
|
|
#define VGE_IMR_ISRC3 0x80000000 /* interrupt source indication */
|
|
|
|
/* TX descriptor queue control/status register */
|
|
|
|
#define VGE_TXQCSR_RUN0 0x0001 /* Enable TX queue 0 */
|
|
#define VGE_TXQCSR_ACT0 0x0002 /* queue 0 active indicator */
|
|
#define VGE_TXQCSR_WAK0 0x0004 /* Wake up (poll) queue 0 */
|
|
#define VGE_TXQCSR_DEAD0 0x0008 /* queue 0 dead indicator */
|
|
#define VGE_TXQCSR_RUN1 0x0010 /* Enable TX queue 1 */
|
|
#define VGE_TXQCSR_ACT1 0x0020 /* queue 1 active indicator */
|
|
#define VGE_TXQCSR_WAK1 0x0040 /* Wake up (poll) queue 1 */
|
|
#define VGE_TXQCSR_DEAD1 0x0080 /* queue 1 dead indicator */
|
|
#define VGE_TXQCSR_RUN2 0x0100 /* Enable TX queue 2 */
|
|
#define VGE_TXQCSR_ACT2 0x0200 /* queue 2 active indicator */
|
|
#define VGE_TXQCSR_WAK2 0x0400 /* Wake up (poll) queue 2 */
|
|
#define VGE_TXQCSR_DEAD2 0x0800 /* queue 2 dead indicator */
|
|
#define VGE_TXQCSR_RUN3 0x1000 /* Enable TX queue 3 */
|
|
#define VGE_TXQCSR_ACT3 0x2000 /* queue 3 active indicator */
|
|
#define VGE_TXQCSR_WAK3 0x4000 /* Wake up (poll) queue 3 */
|
|
#define VGE_TXQCSR_DEAD3 0x8000 /* queue 3 dead indicator */
|
|
|
|
/* RX descriptor queue control/status register */
|
|
|
|
#define VGE_RXQCSR_RUN 0x0001 /* Enable RX queue */
|
|
#define VGE_RXQCSR_ACT 0x0002 /* queue active indicator */
|
|
#define VGE_RXQCSR_WAK 0x0004 /* Wake up (poll) queue */
|
|
#define VGE_RXQCSR_DEAD 0x0008 /* queue dead indicator */
|
|
|
|
/* RX/TX queue empty interrupt delay timer register */
|
|
|
|
#define VGE_QTIMER_PENDCNT 0x3F
|
|
#define VGE_QTIMER_RESOLUTION 0xC0
|
|
|
|
#define VGE_QTIMER_RES_1US 0x00
|
|
#define VGE_QTIMER_RES_4US 0x40
|
|
#define VGE_QTIMER_RES_16US 0x80
|
|
#define VGE_QTIMER_RES_64US 0xC0
|
|
|
|
/* CAM address register */
|
|
|
|
#define VGE_CAMADDR_ADDR 0x3F /* CAM address to program */
|
|
#define VGE_CAMADDR_AVSEL 0x40 /* 0 = address cam, 1 = VLAN cam */
|
|
#define VGE_CAMADDR_ENABLE 0x80 /* enable CAM read/write */
|
|
|
|
#define VGE_CAM_MAXADDRS 64
|
|
|
|
/*
|
|
* CAM command register
|
|
* Note that the page select bits in this register affect three
|
|
* different things:
|
|
* - The behavior of the MAR0/MAR1 registers at offset 0x10 (the
|
|
* page select bits control whether the MAR0/MAR1 registers affect
|
|
* the multicast hash filter or the CAM table)
|
|
* - The behavior of the interrupt holdoff timer register at offset
|
|
* 0x20 (the page select bits allow you to set the interrupt
|
|
* holdoff timer, the TX interrupt supression count or the
|
|
* RX interrupt supression count)
|
|
* - The behavior the WOL pattern programming registers at offset
|
|
* 0xC0 (controls which pattern is set)
|
|
*/
|
|
|
|
|
|
#define VGE_CAMCTL_WRITE 0x04 /* CAM write command */
|
|
#define VGE_CAMCTL_READ 0x08 /* CAM read command */
|
|
#define VGE_CAMCTL_INTPKT_SIZ 0x10 /* select interesting pkt CAM size */
|
|
#define VGE_CAMCTL_INTPKT_ENB 0x20 /* enable interesting packet mode */
|
|
#define VGE_CAMCTL_PAGESEL 0xC0 /* page select */
|
|
|
|
#define VGE_PAGESEL_MAR 0x00
|
|
#define VGE_PAGESEL_CAMMASK 0x40
|
|
#define VGE_PAGESEL_CAMDATA 0x80
|
|
|
|
#define VGE_PAGESEL_INTHLDOFF 0x00
|
|
#define VGE_PAGESEL_TXSUPPTHR 0x40
|
|
#define VGE_PAGESEL_RXSUPPTHR 0x80
|
|
|
|
#define VGE_PAGESEL_WOLPAT0 0x00
|
|
#define VGE_PAGESEL_WOLPAT1 0x40
|
|
|
|
/* MII port config register */
|
|
|
|
#define VGE_MIICFG_PHYADDR 0x1F /* PHY address (internal PHY is 1) */
|
|
#define VGE_MIICFG_MDCSPEED 0x20 /* MDC accelerate x 4 */
|
|
#define VGE_MIICFG_POLLINT 0xC0 /* polling interval */
|
|
|
|
#define VGE_MIIPOLLINT_1024 0x00
|
|
#define VGE_MIIPOLLINT_512 0x40
|
|
#define VGE_MIIPOLLINT_128 0x80
|
|
#define VGE_MIIPOLLINT_64 0xC0
|
|
|
|
/* MII port status register */
|
|
|
|
#define VGE_MIISTS_IIDL 0x80 /* not at sofrware/timer poll cycle */
|
|
|
|
/* PHY status register */
|
|
|
|
#define VGE_PHYSTS_TXFLOWCAP 0x01 /* resolved TX flow control cap */
|
|
#define VGE_PHYSTS_RXFLOWCAP 0x02 /* resolved RX flow control cap */
|
|
#define VGE_PHYSTS_SPEED10 0x04 /* PHY in 10Mbps mode */
|
|
#define VGE_PHYSTS_SPEED1000 0x08 /* PHY in giga mode */
|
|
#define VGE_PHYSTS_FDX 0x10 /* PHY in full duplex mode */
|
|
#define VGE_PHYSTS_LINK 0x40 /* link status */
|
|
#define VGE_PHYSTS_RESETSTS 0x80 /* reset status */
|
|
|
|
/* MII management command register */
|
|
|
|
#define VGE_MIICMD_MDC 0x01 /* clock pin */
|
|
#define VGE_MIICMD_MDI 0x02 /* data in pin */
|
|
#define VGE_MIICMD_MDO 0x04 /* data out pin */
|
|
#define VGE_MIICMD_MOUT 0x08 /* data out pin enable */
|
|
#define VGE_MIICMD_MDP 0x10 /* enable direct programming mode */
|
|
#define VGE_MIICMD_WCMD 0x20 /* embedded mode write */
|
|
#define VGE_MIICMD_RCMD 0x40 /* embadded mode read */
|
|
#define VGE_MIICMD_MAUTO 0x80 /* enable autopolling */
|
|
|
|
/* MII address register */
|
|
|
|
#define VGE_MIIADDR_SWMPL 0x80 /* initiate priority resolution */
|
|
|
|
/* Chip config register A */
|
|
|
|
#define VGE_CHIPCFG0_PACPI 0x01 /* pre-ACPI wakeup function */
|
|
#define VGE_CHIPCFG0_ABSHDN 0x02 /* abnormal shutdown function */
|
|
#define VGE_CHIPCFG0_GPIO1PD 0x04 /* GPIO pin enable */
|
|
#define VGE_CHIPCFG0_SKIPTAG 0x08 /* omit 802.1p tag from CRC calc */
|
|
#define VGE_CHIPCFG0_PHLED 0x30 /* phy LED select */
|
|
|
|
/* Chip config register B */
|
|
/* Note: some of these bits are not documented in the manual! */
|
|
|
|
#define VGE_CHIPCFG1_BAKOPT 0x01
|
|
#define VGE_CHIPCFG1_MBA 0x02
|
|
#define VGE_CHIPCFG1_CAP 0x04
|
|
#define VGE_CHIPCFG1_CRANDOM 0x08
|
|
#define VGE_CHIPCFG1_OFSET 0x10
|
|
#define VGE_CHIPCFG1_SLOTTIME 0x20 /* slot time 512/500 in giga mode */
|
|
#define VGE_CHIPCFG1_MIIOPT 0x40
|
|
#define VGE_CHIPCFG1_GTCKOPT 0x80
|
|
|
|
/* Chip config register C */
|
|
|
|
#define VGE_CHIPCFG2_EELOAD 0x80 /* enable EEPROM programming */
|
|
|
|
/* Chip config register D */
|
|
|
|
#define VGE_CHIPCFG3_64BIT_DAC 0x20 /* enable 64bit via DAC */
|
|
#define VGE_CHIPCFG3_IODISABLE 0x80 /* disable I/O access mode */
|
|
|
|
/* DMA config register 0 */
|
|
|
|
#define VGE_DMACFG0_BURSTLEN 0x07 /* RX/TX DMA burst (in dwords) */
|
|
|
|
#define VGE_DMABURST_8 0x00
|
|
#define VGE_DMABURST_16 0x01
|
|
#define VGE_DMABURST_32 0x02
|
|
#define VGE_DMABURST_64 0x03
|
|
#define VGE_DMABURST_128 0x04
|
|
#define VGE_DMABURST_256 0x05
|
|
#define VGE_DMABURST_STRFWD 0x07
|
|
|
|
/* DMA config register 1 */
|
|
|
|
#define VGE_DMACFG1_LATENB 0x01 /* Latency timer enable */
|
|
#define VGE_DMACFG1_MWWAIT 0x02 /* insert wait on master write */
|
|
#define VGE_DMACFG1_MRWAIT 0x04 /* insert wait on master read */
|
|
#define VGE_DMACFG1_MRM 0x08 /* use memory read multiple */
|
|
#define VGE_DMACFG1_PERR_DIS 0x10 /* disable parity error checking */
|
|
#define VGE_DMACFG1_XMRL 0x20 /* disable memory read line support */
|
|
|
|
/* RX MAC config register */
|
|
|
|
#define VGE_RXCFG_VLANFILT 0x01 /* filter VLAN ID mismatches */
|
|
#define VGE_RXCFG_VTAGOPT 0x06 /* VLAN tag handling */
|
|
#define VGE_RXCFG_FIFO_LOWAT 0x08 /* RX FIFO low watermark (7QW/15QW) */
|
|
#define VGE_RXCFG_FIFO_THR 0x30 /* RX FIFO threshold */
|
|
#define VGE_RXCFG_ARB_PRIO 0x80 /* arbitration priority */
|
|
|
|
#define VGE_VTAG_OPT0 0x00 /* TX: no tag insertion
|
|
RX: rx all, no tag extraction */
|
|
|
|
#define VGE_VTAG_OPT1 0x02 /* TX: no tag insertion
|
|
RX: rx only tagged pkts, no
|
|
extraction */
|
|
|
|
#define VGE_VTAG_OPT2 0x04 /* TX: perform tag insertion,
|
|
RX: rx all, extract tags */
|
|
|
|
#define VGE_VTAG_OPT3 0x06 /* TX: perform tag insertion,
|
|
RX: rx only tagged pkts,
|
|
with extraction */
|
|
|
|
#define VGE_RXFIFOTHR_128BYTES 0x00
|
|
#define VGE_RXFIFOTHR_512BYTES 0x10
|
|
#define VGE_RXFIFOTHR_1024BYTES 0x20
|
|
#define VGE_RXFIFOTHR_STRNFWD 0x30
|
|
|
|
/* TX MAC config register */
|
|
|
|
#define VGE_TXCFG_SNAPOPT 0x01 /* 1 == insert VLAN tag at
|
|
13th byte
|
|
0 == insert VLANM tag after
|
|
SNAP header (21st byte) */
|
|
#define VGE_TXCFG_NONBLK 0x02 /* priority TX/non-blocking mode */
|
|
#define VGE_TXCFG_NONBLK_THR 0x0C /* non-blocking threshold */
|
|
#define VGE_TXCFG_ARB_PRIO 0x80 /* arbitration priority */
|
|
|
|
#define VGE_TXBLOCK_64PKTS 0x00
|
|
#define VGE_TXBLOCK_32PKTS 0x04
|
|
#define VGE_TXBLOCK_128PKTS 0x08
|
|
#define VGE_TXBLOCK_8PKTS 0x0C
|
|
|
|
/* MIB control/status register */
|
|
#define VGE_MIBCSR_CLR 0x01
|
|
#define VGE_MIBCSR_RINI 0x02
|
|
#define VGE_MIBCSR_FLUSH 0x04
|
|
#define VGE_MIBCSR_FREEZE 0x08
|
|
#define VGE_MIBCSR_HI_80 0x00
|
|
#define VGE_MIBCSR_HI_C0 0x10
|
|
#define VGE_MIBCSR_BISTGO 0x40
|
|
#define VGE_MIBCSR_BISTOK 0x80
|
|
|
|
/* MIB data index. */
|
|
#define VGE_MIB_RX_FRAMES 0
|
|
#define VGE_MIB_RX_GOOD_FRAMES 1
|
|
#define VGE_MIB_TX_GOOD_FRAMES 2
|
|
#define VGE_MIB_RX_FIFO_OVERRUNS 3
|
|
#define VGE_MIB_RX_RUNTS 4
|
|
#define VGE_MIB_RX_RUNTS_ERRS 5
|
|
#define VGE_MIB_RX_PKTS_64 6
|
|
#define VGE_MIB_TX_PKTS_64 7
|
|
#define VGE_MIB_RX_PKTS_65_127 8
|
|
#define VGE_MIB_TX_PKTS_65_127 9
|
|
#define VGE_MIB_RX_PKTS_128_255 10
|
|
#define VGE_MIB_TX_PKTS_128_255 11
|
|
#define VGE_MIB_RX_PKTS_256_511 12
|
|
#define VGE_MIB_TX_PKTS_256_511 13
|
|
#define VGE_MIB_RX_PKTS_512_1023 14
|
|
#define VGE_MIB_TX_PKTS_512_1023 15
|
|
#define VGE_MIB_RX_PKTS_1024_1518 16
|
|
#define VGE_MIB_TX_PKTS_1024_1518 17
|
|
#define VGE_MIB_TX_COLLS 18
|
|
#define VGE_MIB_RX_CRCERRS 19
|
|
#define VGE_MIB_RX_JUMBOS 20
|
|
#define VGE_MIB_TX_JUMBOS 21
|
|
#define VGE_MIB_RX_PAUSE 22
|
|
#define VGE_MIB_TX_PAUSE 23
|
|
#define VGE_MIB_RX_ALIGNERRS 24
|
|
#define VGE_MIB_RX_PKTS_1519_MAX 25
|
|
#define VGE_MIB_RX_PKTS_1519_MAX_ERRS 26
|
|
#define VGE_MIB_TX_SQEERRS 27
|
|
#define VGE_MIB_RX_NOBUFS 28
|
|
#define VGE_MIB_RX_SYMERRS 29
|
|
#define VGE_MIB_RX_LENERRS 30
|
|
#define VGE_MIB_TX_LATECOLLS 31
|
|
|
|
#define VGE_MIB_CNT (VGE_MIB_TX_LATECOLLS - VGE_MIB_RX_FRAMES + 1)
|
|
#define VGE_MIB_DATA_MASK 0x00FFFFFF
|
|
#define VGE_MIB_DATA_IDX(x) ((x) >> 24)
|
|
|
|
/* Sticky bit shadow register */
|
|
|
|
#define VGE_STICKHW_DS0 0x01
|
|
#define VGE_STICKHW_DS1 0x02
|
|
#define VGE_STICKHW_WOL_ENB 0x04
|
|
#define VGE_STICKHW_WOL_STS 0x08
|
|
#define VGE_STICKHW_SWPTAG 0x10
|
|
|
|
/* WOL pattern control */
|
|
#define VGE_WOLCR0_PATTERN0 0x01
|
|
#define VGE_WOLCR0_PATTERN1 0x02
|
|
#define VGE_WOLCR0_PATTERN2 0x04
|
|
#define VGE_WOLCR0_PATTERN3 0x08
|
|
#define VGE_WOLCR0_PATTERN4 0x10
|
|
#define VGE_WOLCR0_PATTERN5 0x20
|
|
#define VGE_WOLCR0_PATTERN6 0x40
|
|
#define VGE_WOLCR0_PATTERN7 0x80
|
|
#define VGE_WOLCR0_PATTERN_ALL 0xFF
|
|
|
|
/* WOL event control */
|
|
#define VGE_WOLCR1_UCAST 0x01
|
|
#define VGE_WOLCR1_MAGIC 0x02
|
|
#define VGE_WOLCR1_LINKON 0x04
|
|
#define VGE_WOLCR1_LINKOFF 0x08
|
|
|
|
/* Poweer management config */
|
|
#define VGE_PWRCFG_LEGACY_WOLEN 0x01
|
|
#define VGE_PWRCFG_WOL_PULSE 0x20
|
|
#define VGE_PWRCFG_WOL_BUTTON 0x00
|
|
|
|
/* WOL config register */
|
|
#define VGE_WOLCFG_PHYINT_ENB 0x01
|
|
#define VGE_WOLCFG_SAB 0x10
|
|
#define VGE_WOLCFG_SAM 0x20
|
|
#define VGE_WOLCFG_PMEOVR 0x80
|
|
|
|
/* EEPROM control/status register */
|
|
|
|
#define VGE_EECSR_EDO 0x01 /* data out pin */
|
|
#define VGE_EECSR_EDI 0x02 /* data in pin */
|
|
#define VGE_EECSR_ECK 0x04 /* clock pin */
|
|
#define VGE_EECSR_ECS 0x08 /* chip select pin */
|
|
#define VGE_EECSR_DPM 0x10 /* direct program mode enable */
|
|
#define VGE_EECSR_RELOAD 0x20 /* trigger reload from EEPROM */
|
|
#define VGE_EECSR_EMBP 0x40 /* embedded program mode enable */
|
|
|
|
/* EEPROM embedded command register */
|
|
|
|
#define VGE_EECMD_ERD 0x01 /* EEPROM read command */
|
|
#define VGE_EECMD_EWR 0x02 /* EEPROM write command */
|
|
#define VGE_EECMD_EWEN 0x04 /* EEPROM write enable */
|
|
#define VGE_EECMD_EWDIS 0x08 /* EEPROM write disable */
|
|
#define VGE_EECMD_EDONE 0x80 /* read/write done */
|
|
|
|
/* Chip operation and diagnostic control register */
|
|
|
|
#define VGE_DIAGCTL_PHYINT_ENB 0x01 /* Enable PHY interrupts */
|
|
#define VGE_DIAGCTL_TIMER0_RES 0x02 /* timer0 uSec resolution */
|
|
#define VGE_DIAGCTL_TIMER1_RES 0x04 /* timer1 uSec resolution */
|
|
#define VGE_DIAGCTL_LPSEL_DIS 0x08 /* disable LPSEL field */
|
|
#define VGE_DIAGCTL_MACFORCE 0x10 /* MAC side force mode */
|
|
#define VGE_DIAGCTL_FCRSVD 0x20 /* reserved for future fiber use */
|
|
#define VGE_DIAGCTL_FDXFORCE 0x40 /* force full duplex mode */
|
|
#define VGE_DIAGCTL_GMII 0x80 /* force GMII mode, otherwise MII */
|
|
|
|
/* Location of station address in EEPROM */
|
|
#define VGE_EE_EADDR 0
|
|
|
|
/* DMA descriptor structures */
|
|
|
|
/*
|
|
* Each TX DMA descriptor has a control and status word, and 7
|
|
* fragment address/length words. If a transmitted packet spans
|
|
* more than 7 fragments, it has to be coalesced.
|
|
*/
|
|
|
|
#define VGE_TX_FRAGS 7
|
|
|
|
struct vge_tx_frag {
|
|
uint32_t vge_addrlo;
|
|
uint32_t vge_addrhi;
|
|
};
|
|
|
|
/*
|
|
* The high bit in the buflen field of fragment #0 has special meaning.
|
|
* Normally, the chip requires the driver to issue a TX poll command
|
|
* for every packet that gets put in the TX DMA queue. Sometimes though,
|
|
* the driver might want to queue up several packets at once and just
|
|
* issue one transmit command to have all of them processed. In order
|
|
* to obtain this behavior, the special 'queue' bit must be set.
|
|
*/
|
|
|
|
#define VGE_TXDESC_Q 0x80000000
|
|
|
|
struct vge_tx_desc {
|
|
uint32_t vge_sts;
|
|
uint32_t vge_ctl;
|
|
struct vge_tx_frag vge_frag[VGE_TX_FRAGS];
|
|
};
|
|
|
|
#define VGE_TDSTS_COLLCNT 0x0000000F /* TX collision count */
|
|
#define VGE_TDSTS_COLL 0x00000010 /* collision seen */
|
|
#define VGE_TDSTS_OWINCOLL 0x00000020 /* out of window collision */
|
|
#define VGE_TDSTS_OWT 0x00000040 /* jumbo frame tx abort */
|
|
#define VGE_TDSTS_EXCESSCOLL 0x00000080 /* TX aborted, excess colls */
|
|
#define VGE_TDSTS_HBEATFAIL 0x00000100 /* heartbeat detect failed */
|
|
#define VGE_TDSTS_CARRLOSS 0x00000200 /* carrier sense lost */
|
|
#define VGE_TDSTS_SHUTDOWN 0x00000400 /* shutdown during TX */
|
|
#define VGE_TDSTS_LINKFAIL 0x00001000 /* link fail during TX */
|
|
#define VGE_TDSTS_GMII 0x00002000 /* GMII transmission */
|
|
#define VGE_TDSTS_FDX 0x00004000 /* full duplex transmit */
|
|
#define VGE_TDSTS_TXERR 0x00008000 /* error occurred */
|
|
#define VGE_TDSTS_SEGSIZE 0x3FFF0000 /* TCP large send size */
|
|
#define VGE_TDSTS_OWN 0x80000000 /* own bit */
|
|
|
|
#define VGE_TDCTL_VLANID 0x00000FFF /* VLAN ID */
|
|
#define VGE_TDCTL_CFI 0x00001000 /* VLAN CFI bit */
|
|
#define VGE_TDCTL_PRIO 0x0000E000 /* VLAN prio bits */
|
|
#define VGE_TDCTL_NOCRC 0x00010000 /* disable CRC generation */
|
|
#define VGE_TDCTL_JUMBO 0x00020000 /* jumbo frame */
|
|
#define VGE_TDCTL_TCPCSUM 0x00040000 /* do TCP hw checksum */
|
|
#define VGE_TDCTL_UDPCSUM 0x00080000 /* do UDP hw checksum */
|
|
#define VGE_TDCTL_IPCSUM 0x00100000 /* do IP hw checksum */
|
|
#define VGE_TDCTL_VTAG 0x00200000 /* insert VLAN tag */
|
|
#define VGE_TDCTL_PRIO_INT 0x00400000 /* priority int request */
|
|
#define VGE_TDCTL_TIC 0x00800000 /* transfer int request */
|
|
#define VGE_TDCTL_TCPLSCTL 0x03000000 /* TCP large send ctl */
|
|
#define VGE_TDCTL_FRAGCNT 0xF0000000 /* number of frags used */
|
|
|
|
#define VGE_TD_LS_MOF 0x00000000 /* middle of large send */
|
|
#define VGE_TD_LS_SOF 0x01000000 /* start of large send */
|
|
#define VGE_TD_LS_EOF 0x02000000 /* end of large send */
|
|
#define VGE_TD_LS_NORM 0x03000000 /* normal frame */
|
|
|
|
/* Receive DMA descriptors have a single fragment pointer. */
|
|
|
|
struct vge_rx_desc {
|
|
uint32_t vge_sts;
|
|
uint32_t vge_ctl;
|
|
uint32_t vge_addrlo;
|
|
uint32_t vge_addrhi;
|
|
};
|
|
|
|
/*
|
|
* Like the TX descriptor, the high bit in the buflen field in the
|
|
* RX descriptor has special meaning. This bit controls whether or
|
|
* not interrupts are generated for this descriptor.
|
|
*/
|
|
|
|
#define VGE_RXDESC_I 0x80000000
|
|
|
|
#define VGE_RDSTS_VIDM 0x00000001 /* VLAN tag filter miss */
|
|
#define VGE_RDSTS_CRCERR 0x00000002 /* bad CRC error */
|
|
#define VGE_RDSTS_FAERR 0x00000004 /* frame alignment error */
|
|
#define VGE_RDSTS_CSUMERR 0x00000008 /* bad TCP/IP checksum */
|
|
#define VGE_RDSTS_RLERR 0x00000010 /* RX length error */
|
|
#define VGE_RDSTS_SYMERR 0x00000020 /* PCS symbol error */
|
|
#define VGE_RDSTS_SNTAG 0x00000040 /* RX'ed tagged SNAP pkt */
|
|
#define VGE_RDSTS_DETAG 0x00000080 /* VLAN tag extracted */
|
|
#define VGE_RDSTS_BOUNDARY 0x00000300 /* frame boundary bits */
|
|
#define VGE_RDSTS_VTAG 0x00000400 /* VLAN tag indicator */
|
|
#define VGE_RDSTS_UCAST 0x00000800 /* unicast frame */
|
|
#define VGE_RDSTS_BCAST 0x00001000 /* broadcast frame */
|
|
#define VGE_RDSTS_MCAST 0x00002000 /* multicast frame */
|
|
#define VGE_RDSTS_PFT 0x00004000 /* perfect filter hit */
|
|
#define VGE_RDSTS_RXOK 0x00008000 /* frame is good. */
|
|
#define VGE_RDSTS_BUFSIZ 0x3FFF0000 /* received frame len */
|
|
#define VGE_RDSTS_SHUTDOWN 0x40000000 /* shutdown during RX */
|
|
#define VGE_RDSTS_OWN 0x80000000 /* own bit. */
|
|
|
|
#define VGE_RXPKT_ONEFRAG 0x00000000 /* only one fragment */
|
|
#define VGE_RXPKT_EOF 0x00000100 /* last frag in frame */
|
|
#define VGE_RXPKT_SOF 0x00000200 /* first frag in frame */
|
|
#define VGE_RXPKT_MOF 0x00000300 /* intermediate frag */
|
|
|
|
#define VGE_RDCTL_VLANID 0x0000FFFF /* VLAN ID info */
|
|
#define VGE_RDCTL_UDPPKT 0x00010000 /* UDP packet received */
|
|
#define VGE_RDCTL_TCPPKT 0x00020000 /* TCP packet received */
|
|
#define VGE_RDCTL_IPPKT 0x00040000 /* IP packet received */
|
|
#define VGE_RDCTL_UDPZERO 0x00080000 /* pkt with UDP CSUM of 0 */
|
|
#define VGE_RDCTL_FRAG 0x00100000 /* received IP frag */
|
|
#define VGE_RDCTL_PROTOCSUMOK 0x00200000 /* TCP/UDP checksum ok */
|
|
#define VGE_RDCTL_IPCSUMOK 0x00400000 /* IP checksum ok */
|
|
#define VGE_RDCTL_FILTIDX 0x3C000000 /* interesting filter idx */
|
|
|
|
#endif /* _IF_VGEREG_H_ */
|