freebsd-skq/sys/powerpc/mpc85xx/mpc85xx.h

86 lines
2.6 KiB
C

/*-
* Copyright (C) 2008 Semihalf, Rafal Jaworowski
* Copyright 2006 by Juniper Networks.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _MPC85XX_H_
#define _MPC85XX_H_
/*
* Configuration control and status registers
*/
#define OCP85XX_CCSRBAR (CCSRBAR_VA + 0x0)
#define OCP85XX_BPTR (CCSRBAR_VA + 0x20)
/*
* E500 Coherency Module registers
*/
#define OCP85XX_EEBPCR (CCSRBAR_VA + 0x1010)
/*
* Local access registers
*/
#define OCP85XX_LAWBAR(n) (CCSRBAR_VA + 0xc08 + 0x20 * (n))
#define OCP85XX_LAWSR(n) (CCSRBAR_VA + 0xc10 + 0x20 * (n))
#define OCP85XX_TGTIF_LBC 4
#define OCP85XX_TGTIF_RAM_INTL 11
#define OCP85XX_TGTIF_RIO 12
#define OCP85XX_TGTIF_RAM1 15
#define OCP85XX_TGTIF_RAM2 22
/*
* L2 cache registers
*/
#define OCP85XX_L2CTL (CCSRBAR_VA + 0x20000)
/*
* Power-On Reset configuration
*/
#define OCP85XX_PORDEVSR (CCSRBAR_VA + 0xe000c)
#define OCP85XX_PORDEVSR_IO_SEL 0x00780000
#define OCP85XX_PORDEVSR_IO_SEL_SHIFT 19
#define OCP85XX_PORDEVSR2 (CCSRBAR_VA + 0xe0014)
/*
* Status Registers.
*/
#define OCP85XX_RSTCR (CCSRBAR_VA + 0xe00b0)
/*
* Prototypes.
*/
uint32_t ccsr_read4(uintptr_t addr);
void ccsr_write4(uintptr_t addr, uint32_t val);
int law_enable(int trgt, u_long addr, u_long size);
int law_disable(int trgt, u_long addr, u_long size);
int law_getmax(void);
int law_pci_target(struct resource *, int *, int *);
#endif /* _MPC85XX_H_ */