7d542e2d80
so that the mac address can be overridden.
2586 lines
66 KiB
C
2586 lines
66 KiB
C
/******************************************************************************
|
|
|
|
Copyright (c) 2006, Myricom Inc.
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice,
|
|
this list of conditions and the following disclaimer.
|
|
|
|
2. Redistributions in binary form must reproduce the above copyright
|
|
notice, this list of conditions and the following disclaimer in the
|
|
documentation and/or other materials provided with the distribution.
|
|
|
|
3. Neither the name of the Myricom Inc, nor the names of its
|
|
contributors may be used to endorse or promote products derived from
|
|
this software without specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
***************************************************************************/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/linker.h>
|
|
#include <sys/firmware.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/kdb.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
#include <sys/memrange.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/sx.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/ethernet.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
|
|
#include <net/bpf.h>
|
|
|
|
#include <net/if_types.h>
|
|
#include <net/if_vlan_var.h>
|
|
#include <net/zlib.h>
|
|
|
|
#include <netinet/in_systm.h>
|
|
#include <netinet/in.h>
|
|
#include <netinet/ip.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/rman.h>
|
|
|
|
#include <dev/pci/pcireg.h>
|
|
#include <dev/pci/pcivar.h>
|
|
|
|
#include <vm/vm.h> /* for pmap_mapdev() */
|
|
#include <vm/pmap.h>
|
|
|
|
#include <dev/mxge/mxge_mcp.h>
|
|
#include <dev/mxge/mcp_gen_header.h>
|
|
#include <dev/mxge/if_mxge_var.h>
|
|
|
|
/* tunable params */
|
|
static int mxge_nvidia_ecrc_enable = 1;
|
|
static int mxge_max_intr_slots = 1024;
|
|
static int mxge_intr_coal_delay = 30;
|
|
static int mxge_deassert_wait = 1;
|
|
static int mxge_flow_control = 1;
|
|
static int mxge_verbose = 0;
|
|
static char *mxge_fw_unaligned = "mxge_ethp_z8e";
|
|
static char *mxge_fw_aligned = "mxge_eth_z8e";
|
|
|
|
static int mxge_probe(device_t dev);
|
|
static int mxge_attach(device_t dev);
|
|
static int mxge_detach(device_t dev);
|
|
static int mxge_shutdown(device_t dev);
|
|
static void mxge_intr(void *arg);
|
|
|
|
static device_method_t mxge_methods[] =
|
|
{
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, mxge_probe),
|
|
DEVMETHOD(device_attach, mxge_attach),
|
|
DEVMETHOD(device_detach, mxge_detach),
|
|
DEVMETHOD(device_shutdown, mxge_shutdown),
|
|
{0, 0}
|
|
};
|
|
|
|
static driver_t mxge_driver =
|
|
{
|
|
"mxge",
|
|
mxge_methods,
|
|
sizeof(mxge_softc_t),
|
|
};
|
|
|
|
static devclass_t mxge_devclass;
|
|
|
|
/* Declare ourselves to be a child of the PCI bus.*/
|
|
DRIVER_MODULE(mxge, pci, mxge_driver, mxge_devclass, 0, 0);
|
|
MODULE_DEPEND(mxge, firmware, 1, 1, 1);
|
|
|
|
static int
|
|
mxge_probe(device_t dev)
|
|
{
|
|
if ((pci_get_vendor(dev) == MXGE_PCI_VENDOR_MYRICOM) &&
|
|
(pci_get_device(dev) == MXGE_PCI_DEVICE_Z8E)) {
|
|
device_set_desc(dev, "Myri10G-PCIE-8A");
|
|
return 0;
|
|
}
|
|
return ENXIO;
|
|
}
|
|
|
|
static void
|
|
mxge_enable_wc(mxge_softc_t *sc)
|
|
{
|
|
struct mem_range_desc mrdesc;
|
|
vm_paddr_t pa;
|
|
vm_offset_t len;
|
|
int err, action;
|
|
|
|
pa = rman_get_start(sc->mem_res);
|
|
len = rman_get_size(sc->mem_res);
|
|
mrdesc.mr_base = pa;
|
|
mrdesc.mr_len = len;
|
|
mrdesc.mr_flags = MDF_WRITECOMBINE;
|
|
action = MEMRANGE_SET_UPDATE;
|
|
strcpy((char *)&mrdesc.mr_owner, "mxge");
|
|
err = mem_range_attr_set(&mrdesc, &action);
|
|
if (err != 0) {
|
|
device_printf(sc->dev,
|
|
"w/c failed for pa 0x%lx, len 0x%lx, err = %d\n",
|
|
(unsigned long)pa, (unsigned long)len, err);
|
|
} else {
|
|
sc->wc = 1;
|
|
}
|
|
}
|
|
|
|
|
|
/* callback to get our DMA address */
|
|
static void
|
|
mxge_dmamap_callback(void *arg, bus_dma_segment_t *segs, int nsegs,
|
|
int error)
|
|
{
|
|
if (error == 0) {
|
|
*(bus_addr_t *) arg = segs->ds_addr;
|
|
}
|
|
}
|
|
|
|
static int
|
|
mxge_dma_alloc(mxge_softc_t *sc, mxge_dma_t *dma, size_t bytes,
|
|
bus_size_t alignment)
|
|
{
|
|
int err;
|
|
device_t dev = sc->dev;
|
|
|
|
/* allocate DMAable memory tags */
|
|
err = bus_dma_tag_create(sc->parent_dmat, /* parent */
|
|
alignment, /* alignment */
|
|
4096, /* boundary */
|
|
BUS_SPACE_MAXADDR, /* low */
|
|
BUS_SPACE_MAXADDR, /* high */
|
|
NULL, NULL, /* filter */
|
|
bytes, /* maxsize */
|
|
1, /* num segs */
|
|
4096, /* maxsegsize */
|
|
BUS_DMA_COHERENT, /* flags */
|
|
NULL, NULL, /* lock */
|
|
&dma->dmat); /* tag */
|
|
if (err != 0) {
|
|
device_printf(dev, "couldn't alloc tag (err = %d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
/* allocate DMAable memory & map */
|
|
err = bus_dmamem_alloc(dma->dmat, &dma->addr,
|
|
(BUS_DMA_WAITOK | BUS_DMA_COHERENT
|
|
| BUS_DMA_ZERO), &dma->map);
|
|
if (err != 0) {
|
|
device_printf(dev, "couldn't alloc mem (err = %d)\n", err);
|
|
goto abort_with_dmat;
|
|
}
|
|
|
|
/* load the memory */
|
|
err = bus_dmamap_load(dma->dmat, dma->map, dma->addr, bytes,
|
|
mxge_dmamap_callback,
|
|
(void *)&dma->bus_addr, 0);
|
|
if (err != 0) {
|
|
device_printf(dev, "couldn't load map (err = %d)\n", err);
|
|
goto abort_with_mem;
|
|
}
|
|
return 0;
|
|
|
|
abort_with_mem:
|
|
bus_dmamem_free(dma->dmat, dma->addr, dma->map);
|
|
abort_with_dmat:
|
|
(void)bus_dma_tag_destroy(dma->dmat);
|
|
return err;
|
|
}
|
|
|
|
|
|
static void
|
|
mxge_dma_free(mxge_dma_t *dma)
|
|
{
|
|
bus_dmamap_unload(dma->dmat, dma->map);
|
|
bus_dmamem_free(dma->dmat, dma->addr, dma->map);
|
|
(void)bus_dma_tag_destroy(dma->dmat);
|
|
}
|
|
|
|
/*
|
|
* The eeprom strings on the lanaiX have the format
|
|
* SN=x\0
|
|
* MAC=x:x:x:x:x:x\0
|
|
* PC=text\0
|
|
*/
|
|
|
|
static int
|
|
mxge_parse_strings(mxge_softc_t *sc)
|
|
{
|
|
#define MXGE_NEXT_STRING(p) while(ptr < limit && *ptr++)
|
|
|
|
char *ptr, *limit;
|
|
int i, found_mac;
|
|
|
|
ptr = sc->eeprom_strings;
|
|
limit = sc->eeprom_strings + MXGE_EEPROM_STRINGS_SIZE;
|
|
found_mac = 0;
|
|
while (ptr < limit && *ptr != '\0') {
|
|
if (memcmp(ptr, "MAC=", 4) == 0) {
|
|
ptr += 1;
|
|
sc->mac_addr_string = ptr;
|
|
for (i = 0; i < 6; i++) {
|
|
ptr += 3;
|
|
if ((ptr + 2) > limit)
|
|
goto abort;
|
|
sc->mac_addr[i] = strtoul(ptr, NULL, 16);
|
|
found_mac = 1;
|
|
}
|
|
} else if (memcmp(ptr, "PC=", 3) == 0) {
|
|
ptr += 3;
|
|
strncpy(sc->product_code_string, ptr,
|
|
sizeof (sc->product_code_string) - 1);
|
|
} else if (memcmp(ptr, "SN=", 3) == 0) {
|
|
ptr += 3;
|
|
strncpy(sc->serial_number_string, ptr,
|
|
sizeof (sc->serial_number_string) - 1);
|
|
}
|
|
MXGE_NEXT_STRING(ptr);
|
|
}
|
|
|
|
if (found_mac)
|
|
return 0;
|
|
|
|
abort:
|
|
device_printf(sc->dev, "failed to parse eeprom_strings\n");
|
|
|
|
return ENXIO;
|
|
}
|
|
|
|
#if #cpu(i386) || defined __i386 || defined i386 || defined __i386__ || #cpu(x86_64) || defined __x86_64__
|
|
static int
|
|
mxge_enable_nvidia_ecrc(mxge_softc_t *sc, device_t pdev)
|
|
{
|
|
uint32_t val;
|
|
unsigned long off;
|
|
char *va, *cfgptr;
|
|
uint16_t vendor_id, device_id;
|
|
uintptr_t bus, slot, func, ivend, idev;
|
|
uint32_t *ptr32;
|
|
|
|
/* XXXX
|
|
Test below is commented because it is believed that doing
|
|
config read/write beyond 0xff will access the config space
|
|
for the next larger function. Uncomment this and remove
|
|
the hacky pmap_mapdev() way of accessing config space when
|
|
FreeBSD grows support for extended pcie config space access
|
|
*/
|
|
#if 0
|
|
/* See if we can, by some miracle, access the extended
|
|
config space */
|
|
val = pci_read_config(pdev, 0x178, 4);
|
|
if (val != 0xffffffff) {
|
|
val |= 0x40;
|
|
pci_write_config(pdev, 0x178, val, 4);
|
|
return 0;
|
|
}
|
|
#endif
|
|
/* Rather than using normal pci config space writes, we must
|
|
* map the Nvidia config space ourselves. This is because on
|
|
* opteron/nvidia class machine the 0xe000000 mapping is
|
|
* handled by the nvidia chipset, that means the internal PCI
|
|
* device (the on-chip northbridge), or the amd-8131 bridge
|
|
* and things behind them are not visible by this method.
|
|
*/
|
|
|
|
BUS_READ_IVAR(device_get_parent(pdev), pdev,
|
|
PCI_IVAR_BUS, &bus);
|
|
BUS_READ_IVAR(device_get_parent(pdev), pdev,
|
|
PCI_IVAR_SLOT, &slot);
|
|
BUS_READ_IVAR(device_get_parent(pdev), pdev,
|
|
PCI_IVAR_FUNCTION, &func);
|
|
BUS_READ_IVAR(device_get_parent(pdev), pdev,
|
|
PCI_IVAR_VENDOR, &ivend);
|
|
BUS_READ_IVAR(device_get_parent(pdev), pdev,
|
|
PCI_IVAR_DEVICE, &idev);
|
|
|
|
off = 0xe0000000UL
|
|
+ 0x00100000UL * (unsigned long)bus
|
|
+ 0x00001000UL * (unsigned long)(func
|
|
+ 8 * slot);
|
|
|
|
/* map it into the kernel */
|
|
va = pmap_mapdev(trunc_page((vm_paddr_t)off), PAGE_SIZE);
|
|
|
|
|
|
if (va == NULL) {
|
|
device_printf(sc->dev, "pmap_kenter_temporary didn't\n");
|
|
return EIO;
|
|
}
|
|
/* get a pointer to the config space mapped into the kernel */
|
|
cfgptr = va + (off & PAGE_MASK);
|
|
|
|
/* make sure that we can really access it */
|
|
vendor_id = *(uint16_t *)(cfgptr + PCIR_VENDOR);
|
|
device_id = *(uint16_t *)(cfgptr + PCIR_DEVICE);
|
|
if (! (vendor_id == ivend && device_id == idev)) {
|
|
device_printf(sc->dev, "mapping failed: 0x%x:0x%x\n",
|
|
vendor_id, device_id);
|
|
pmap_unmapdev((vm_offset_t)va, PAGE_SIZE);
|
|
return EIO;
|
|
}
|
|
|
|
ptr32 = (uint32_t*)(cfgptr + 0x178);
|
|
val = *ptr32;
|
|
|
|
if (val == 0xffffffff) {
|
|
device_printf(sc->dev, "extended mapping failed\n");
|
|
pmap_unmapdev((vm_offset_t)va, PAGE_SIZE);
|
|
return EIO;
|
|
}
|
|
*ptr32 = val | 0x40;
|
|
pmap_unmapdev((vm_offset_t)va, PAGE_SIZE);
|
|
if (mxge_verbose)
|
|
device_printf(sc->dev,
|
|
"Enabled ECRC on upstream Nvidia bridge "
|
|
"at %d:%d:%d\n",
|
|
(int)bus, (int)slot, (int)func);
|
|
return 0;
|
|
}
|
|
#else
|
|
static int
|
|
mxge_enable_nvidia_ecrc(mxge_softc_t *sc, device_t pdev)
|
|
{
|
|
device_printf(sc->dev,
|
|
"Nforce 4 chipset on non-x86/amd64!?!?!\n");
|
|
return ENXIO;
|
|
}
|
|
#endif
|
|
/*
|
|
* The Lanai Z8E PCI-E interface achieves higher Read-DMA throughput
|
|
* when the PCI-E Completion packets are aligned on an 8-byte
|
|
* boundary. Some PCI-E chip sets always align Completion packets; on
|
|
* the ones that do not, the alignment can be enforced by enabling
|
|
* ECRC generation (if supported).
|
|
*
|
|
* When PCI-E Completion packets are not aligned, it is actually more
|
|
* efficient to limit Read-DMA transactions to 2KB, rather than 4KB.
|
|
*
|
|
* If the driver can neither enable ECRC nor verify that it has
|
|
* already been enabled, then it must use a firmware image which works
|
|
* around unaligned completion packets (ethp_z8e.dat), and it should
|
|
* also ensure that it never gives the device a Read-DMA which is
|
|
* larger than 2KB by setting the tx.boundary to 2KB. If ECRC is
|
|
* enabled, then the driver should use the aligned (eth_z8e.dat)
|
|
* firmware image, and set tx.boundary to 4KB.
|
|
*/
|
|
|
|
static void
|
|
mxge_select_firmware(mxge_softc_t *sc)
|
|
{
|
|
int err, aligned = 0;
|
|
device_t pdev;
|
|
uint16_t pvend, pdid;
|
|
|
|
pdev = device_get_parent(device_get_parent(sc->dev));
|
|
if (pdev == NULL) {
|
|
device_printf(sc->dev, "could not find parent?\n");
|
|
goto abort;
|
|
}
|
|
pvend = pci_read_config(pdev, PCIR_VENDOR, 2);
|
|
pdid = pci_read_config(pdev, PCIR_DEVICE, 2);
|
|
|
|
/* see if we can enable ECRC's on an upstream
|
|
Nvidia bridge */
|
|
if (mxge_nvidia_ecrc_enable &&
|
|
(pvend == 0x10de && pdid == 0x005d)) {
|
|
err = mxge_enable_nvidia_ecrc(sc, pdev);
|
|
if (err == 0) {
|
|
aligned = 1;
|
|
if (mxge_verbose)
|
|
device_printf(sc->dev,
|
|
"Assuming aligned completions"
|
|
" (ECRC)\n");
|
|
}
|
|
}
|
|
/* see if the upstream bridge is known to
|
|
provided aligned completions */
|
|
if (/* HT2000 */ (pvend == 0x1166 && pdid == 0x0132) ||
|
|
/* Ontario */ (pvend == 0x10b5 && pdid == 0x8532)) {
|
|
if (mxge_verbose)
|
|
device_printf(sc->dev,
|
|
"Assuming aligned completions "
|
|
"(0x%x:0x%x)\n", pvend, pdid);
|
|
}
|
|
|
|
abort:
|
|
if (aligned) {
|
|
sc->fw_name = mxge_fw_aligned;
|
|
sc->tx.boundary = 4096;
|
|
} else {
|
|
sc->fw_name = mxge_fw_unaligned;
|
|
sc->tx.boundary = 2048;
|
|
}
|
|
}
|
|
|
|
union qualhack
|
|
{
|
|
const char *ro_char;
|
|
char *rw_char;
|
|
};
|
|
|
|
static int
|
|
mxge_validate_firmware(mxge_softc_t *sc, const mcp_gen_header_t *hdr)
|
|
{
|
|
int major, minor;
|
|
|
|
if (be32toh(hdr->mcp_type) != MCP_TYPE_ETH) {
|
|
device_printf(sc->dev, "Bad firmware type: 0x%x\n",
|
|
be32toh(hdr->mcp_type));
|
|
return EIO;
|
|
}
|
|
|
|
/* save firmware version for sysctl */
|
|
strncpy(sc->fw_version, hdr->version, sizeof (sc->fw_version));
|
|
if (mxge_verbose)
|
|
device_printf(sc->dev, "firmware id: %s\n", hdr->version);
|
|
|
|
sscanf(sc->fw_version, "%d.%d", &major, &minor);
|
|
|
|
if (!(major == MXGEFW_VERSION_MAJOR
|
|
&& minor == MXGEFW_VERSION_MINOR)) {
|
|
device_printf(sc->dev, "Found firmware version %s\n",
|
|
sc->fw_version);
|
|
device_printf(sc->dev, "Driver needs %d.%d\n",
|
|
MXGEFW_VERSION_MAJOR, MXGEFW_VERSION_MINOR);
|
|
return EINVAL;
|
|
}
|
|
return 0;
|
|
|
|
}
|
|
|
|
static int
|
|
mxge_load_firmware_helper(mxge_softc_t *sc, uint32_t *limit)
|
|
{
|
|
struct firmware *fw;
|
|
const mcp_gen_header_t *hdr;
|
|
unsigned hdr_offset;
|
|
const char *fw_data;
|
|
union qualhack hack;
|
|
int status;
|
|
unsigned int i;
|
|
char dummy;
|
|
|
|
|
|
fw = firmware_get(sc->fw_name);
|
|
|
|
if (fw == NULL) {
|
|
device_printf(sc->dev, "Could not find firmware image %s\n",
|
|
sc->fw_name);
|
|
return ENOENT;
|
|
}
|
|
if (fw->datasize > *limit ||
|
|
fw->datasize < MCP_HEADER_PTR_OFFSET + 4) {
|
|
device_printf(sc->dev, "Firmware image %s too large (%d/%d)\n",
|
|
sc->fw_name, (int)fw->datasize, (int) *limit);
|
|
status = ENOSPC;
|
|
goto abort_with_fw;
|
|
}
|
|
*limit = fw->datasize;
|
|
|
|
/* check id */
|
|
fw_data = (const char *)fw->data;
|
|
hdr_offset = htobe32(*(const uint32_t *)
|
|
(fw_data + MCP_HEADER_PTR_OFFSET));
|
|
if ((hdr_offset & 3) || hdr_offset + sizeof(*hdr) > fw->datasize) {
|
|
device_printf(sc->dev, "Bad firmware file");
|
|
status = EIO;
|
|
goto abort_with_fw;
|
|
}
|
|
hdr = (const void*)(fw_data + hdr_offset);
|
|
|
|
status = mxge_validate_firmware(sc, hdr);
|
|
if (status != 0)
|
|
goto abort_with_fw;
|
|
|
|
hack.ro_char = fw_data;
|
|
/* Copy the inflated firmware to NIC SRAM. */
|
|
for (i = 0; i < *limit; i += 256) {
|
|
mxge_pio_copy(sc->sram + MXGE_FW_OFFSET + i,
|
|
hack.rw_char + i,
|
|
min(256U, (unsigned)(*limit - i)));
|
|
mb();
|
|
dummy = *sc->sram;
|
|
mb();
|
|
}
|
|
|
|
status = 0;
|
|
abort_with_fw:
|
|
firmware_put(fw, FIRMWARE_UNLOAD);
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* Enable or disable periodic RDMAs from the host to make certain
|
|
* chipsets resend dropped PCIe messages
|
|
*/
|
|
|
|
static void
|
|
mxge_dummy_rdma(mxge_softc_t *sc, int enable)
|
|
{
|
|
char buf_bytes[72];
|
|
volatile uint32_t *confirm;
|
|
volatile char *submit;
|
|
uint32_t *buf, dma_low, dma_high;
|
|
int i;
|
|
|
|
buf = (uint32_t *)((unsigned long)(buf_bytes + 7) & ~7UL);
|
|
|
|
/* clear confirmation addr */
|
|
confirm = (volatile uint32_t *)sc->cmd;
|
|
*confirm = 0;
|
|
mb();
|
|
|
|
/* send an rdma command to the PCIe engine, and wait for the
|
|
response in the confirmation address. The firmware should
|
|
write a -1 there to indicate it is alive and well
|
|
*/
|
|
|
|
dma_low = MXGE_LOWPART_TO_U32(sc->cmd_dma.bus_addr);
|
|
dma_high = MXGE_HIGHPART_TO_U32(sc->cmd_dma.bus_addr);
|
|
buf[0] = htobe32(dma_high); /* confirm addr MSW */
|
|
buf[1] = htobe32(dma_low); /* confirm addr LSW */
|
|
buf[2] = htobe32(0xffffffff); /* confirm data */
|
|
dma_low = MXGE_LOWPART_TO_U32(sc->zeropad_dma.bus_addr);
|
|
dma_high = MXGE_HIGHPART_TO_U32(sc->zeropad_dma.bus_addr);
|
|
buf[3] = htobe32(dma_high); /* dummy addr MSW */
|
|
buf[4] = htobe32(dma_low); /* dummy addr LSW */
|
|
buf[5] = htobe32(enable); /* enable? */
|
|
|
|
|
|
submit = (volatile char *)(sc->sram + 0xfc01c0);
|
|
|
|
mxge_pio_copy(submit, buf, 64);
|
|
mb();
|
|
DELAY(1000);
|
|
mb();
|
|
i = 0;
|
|
while (*confirm != 0xffffffff && i < 20) {
|
|
DELAY(1000);
|
|
i++;
|
|
}
|
|
if (*confirm != 0xffffffff) {
|
|
device_printf(sc->dev, "dummy rdma %s failed (%p = 0x%x)",
|
|
(enable ? "enable" : "disable"), confirm,
|
|
*confirm);
|
|
}
|
|
return;
|
|
}
|
|
|
|
static int
|
|
mxge_send_cmd(mxge_softc_t *sc, uint32_t cmd, mxge_cmd_t *data)
|
|
{
|
|
mcp_cmd_t *buf;
|
|
char buf_bytes[sizeof(*buf) + 8];
|
|
volatile mcp_cmd_response_t *response = sc->cmd;
|
|
volatile char *cmd_addr = sc->sram + MXGEFW_CMD_OFFSET;
|
|
uint32_t dma_low, dma_high;
|
|
int sleep_total = 0;
|
|
|
|
/* ensure buf is aligned to 8 bytes */
|
|
buf = (mcp_cmd_t *)((unsigned long)(buf_bytes + 7) & ~7UL);
|
|
|
|
buf->data0 = htobe32(data->data0);
|
|
buf->data1 = htobe32(data->data1);
|
|
buf->data2 = htobe32(data->data2);
|
|
buf->cmd = htobe32(cmd);
|
|
dma_low = MXGE_LOWPART_TO_U32(sc->cmd_dma.bus_addr);
|
|
dma_high = MXGE_HIGHPART_TO_U32(sc->cmd_dma.bus_addr);
|
|
|
|
buf->response_addr.low = htobe32(dma_low);
|
|
buf->response_addr.high = htobe32(dma_high);
|
|
mtx_lock(&sc->cmd_lock);
|
|
response->result = 0xffffffff;
|
|
mb();
|
|
mxge_pio_copy((volatile void *)cmd_addr, buf, sizeof (*buf));
|
|
|
|
/* wait up to 20ms */
|
|
for (sleep_total = 0; sleep_total < 20; sleep_total++) {
|
|
bus_dmamap_sync(sc->cmd_dma.dmat,
|
|
sc->cmd_dma.map, BUS_DMASYNC_POSTREAD);
|
|
mb();
|
|
if (response->result != 0xffffffff) {
|
|
if (response->result == 0) {
|
|
data->data0 = be32toh(response->data);
|
|
mtx_unlock(&sc->cmd_lock);
|
|
return 0;
|
|
} else {
|
|
device_printf(sc->dev,
|
|
"mxge: command %d "
|
|
"failed, result = %d\n",
|
|
cmd, be32toh(response->result));
|
|
mtx_unlock(&sc->cmd_lock);
|
|
return ENXIO;
|
|
}
|
|
}
|
|
DELAY(1000);
|
|
}
|
|
mtx_unlock(&sc->cmd_lock);
|
|
device_printf(sc->dev, "mxge: command %d timed out"
|
|
"result = %d\n",
|
|
cmd, be32toh(response->result));
|
|
return EAGAIN;
|
|
}
|
|
|
|
static int
|
|
mxge_adopt_running_firmware(mxge_softc_t *sc)
|
|
{
|
|
struct mcp_gen_header *hdr;
|
|
const size_t bytes = sizeof (struct mcp_gen_header);
|
|
size_t hdr_offset;
|
|
int status;
|
|
|
|
/* find running firmware header */
|
|
hdr_offset = htobe32(*(volatile uint32_t *)
|
|
(sc->sram + MCP_HEADER_PTR_OFFSET));
|
|
|
|
if ((hdr_offset & 3) || hdr_offset + sizeof(*hdr) > sc->sram_size) {
|
|
device_printf(sc->dev,
|
|
"Running firmware has bad header offset (%d)\n",
|
|
(int)hdr_offset);
|
|
return EIO;
|
|
}
|
|
|
|
/* copy header of running firmware from SRAM to host memory to
|
|
* validate firmware */
|
|
hdr = malloc(bytes, M_DEVBUF, M_NOWAIT);
|
|
if (hdr == NULL) {
|
|
device_printf(sc->dev, "could not malloc firmware hdr\n");
|
|
return ENOMEM;
|
|
}
|
|
bus_space_read_region_1(rman_get_bustag(sc->mem_res),
|
|
rman_get_bushandle(sc->mem_res),
|
|
hdr_offset, (char *)hdr, bytes);
|
|
status = mxge_validate_firmware(sc, hdr);
|
|
free(hdr, M_DEVBUF);
|
|
return status;
|
|
}
|
|
|
|
|
|
static int
|
|
mxge_load_firmware(mxge_softc_t *sc)
|
|
{
|
|
volatile uint32_t *confirm;
|
|
volatile char *submit;
|
|
char buf_bytes[72];
|
|
uint32_t *buf, size, dma_low, dma_high;
|
|
int status, i;
|
|
|
|
buf = (uint32_t *)((unsigned long)(buf_bytes + 7) & ~7UL);
|
|
|
|
size = sc->sram_size;
|
|
status = mxge_load_firmware_helper(sc, &size);
|
|
if (status) {
|
|
/* Try to use the currently running firmware, if
|
|
it is new enough */
|
|
status = mxge_adopt_running_firmware(sc);
|
|
if (status) {
|
|
device_printf(sc->dev,
|
|
"failed to adopt running firmware\n");
|
|
return status;
|
|
}
|
|
device_printf(sc->dev,
|
|
"Successfully adopted running firmware\n");
|
|
if (sc->tx.boundary == 4096) {
|
|
device_printf(sc->dev,
|
|
"Using firmware currently running on NIC"
|
|
". For optimal\n");
|
|
device_printf(sc->dev,
|
|
"performance consider loading optimized "
|
|
"firmware\n");
|
|
}
|
|
|
|
}
|
|
/* clear confirmation addr */
|
|
confirm = (volatile uint32_t *)sc->cmd;
|
|
*confirm = 0;
|
|
mb();
|
|
/* send a reload command to the bootstrap MCP, and wait for the
|
|
response in the confirmation address. The firmware should
|
|
write a -1 there to indicate it is alive and well
|
|
*/
|
|
|
|
dma_low = MXGE_LOWPART_TO_U32(sc->cmd_dma.bus_addr);
|
|
dma_high = MXGE_HIGHPART_TO_U32(sc->cmd_dma.bus_addr);
|
|
|
|
buf[0] = htobe32(dma_high); /* confirm addr MSW */
|
|
buf[1] = htobe32(dma_low); /* confirm addr LSW */
|
|
buf[2] = htobe32(0xffffffff); /* confirm data */
|
|
|
|
/* FIX: All newest firmware should un-protect the bottom of
|
|
the sram before handoff. However, the very first interfaces
|
|
do not. Therefore the handoff copy must skip the first 8 bytes
|
|
*/
|
|
/* where the code starts*/
|
|
buf[3] = htobe32(MXGE_FW_OFFSET + 8);
|
|
buf[4] = htobe32(size - 8); /* length of code */
|
|
buf[5] = htobe32(8); /* where to copy to */
|
|
buf[6] = htobe32(0); /* where to jump to */
|
|
|
|
submit = (volatile char *)(sc->sram + 0xfc0000);
|
|
mxge_pio_copy(submit, buf, 64);
|
|
mb();
|
|
DELAY(1000);
|
|
mb();
|
|
i = 0;
|
|
while (*confirm != 0xffffffff && i < 20) {
|
|
DELAY(1000*10);
|
|
i++;
|
|
bus_dmamap_sync(sc->cmd_dma.dmat,
|
|
sc->cmd_dma.map, BUS_DMASYNC_POSTREAD);
|
|
}
|
|
if (*confirm != 0xffffffff) {
|
|
device_printf(sc->dev,"handoff failed (%p = 0x%x)",
|
|
confirm, *confirm);
|
|
|
|
return ENXIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
mxge_update_mac_address(mxge_softc_t *sc)
|
|
{
|
|
mxge_cmd_t cmd;
|
|
uint8_t *addr = sc->mac_addr;
|
|
int status;
|
|
|
|
|
|
cmd.data0 = ((addr[0] << 24) | (addr[1] << 16)
|
|
| (addr[2] << 8) | addr[3]);
|
|
|
|
cmd.data1 = ((addr[4] << 8) | (addr[5]));
|
|
|
|
status = mxge_send_cmd(sc, MXGEFW_SET_MAC_ADDRESS, &cmd);
|
|
return status;
|
|
}
|
|
|
|
static int
|
|
mxge_change_pause(mxge_softc_t *sc, int pause)
|
|
{
|
|
mxge_cmd_t cmd;
|
|
int status;
|
|
|
|
if (pause)
|
|
status = mxge_send_cmd(sc, MXGEFW_ENABLE_FLOW_CONTROL,
|
|
&cmd);
|
|
else
|
|
status = mxge_send_cmd(sc, MXGEFW_DISABLE_FLOW_CONTROL,
|
|
&cmd);
|
|
|
|
if (status) {
|
|
device_printf(sc->dev, "Failed to set flow control mode\n");
|
|
return ENXIO;
|
|
}
|
|
sc->pause = pause;
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
mxge_change_promisc(mxge_softc_t *sc, int promisc)
|
|
{
|
|
mxge_cmd_t cmd;
|
|
int status;
|
|
|
|
if (promisc)
|
|
status = mxge_send_cmd(sc, MXGEFW_ENABLE_PROMISC,
|
|
&cmd);
|
|
else
|
|
status = mxge_send_cmd(sc, MXGEFW_DISABLE_PROMISC,
|
|
&cmd);
|
|
|
|
if (status) {
|
|
device_printf(sc->dev, "Failed to set promisc mode\n");
|
|
}
|
|
}
|
|
|
|
static int
|
|
mxge_reset(mxge_softc_t *sc)
|
|
{
|
|
|
|
mxge_cmd_t cmd;
|
|
mxge_dma_t dmabench_dma;
|
|
size_t bytes;
|
|
int status;
|
|
|
|
/* try to send a reset command to the card to see if it
|
|
is alive */
|
|
memset(&cmd, 0, sizeof (cmd));
|
|
status = mxge_send_cmd(sc, MXGEFW_CMD_RESET, &cmd);
|
|
if (status != 0) {
|
|
device_printf(sc->dev, "failed reset\n");
|
|
return ENXIO;
|
|
}
|
|
|
|
mxge_dummy_rdma(sc, 1);
|
|
|
|
/* Now exchange information about interrupts */
|
|
bytes = mxge_max_intr_slots * sizeof (*sc->rx_done.entry);\
|
|
memset(sc->rx_done.entry, 0, bytes);
|
|
cmd.data0 = (uint32_t)bytes;
|
|
status = mxge_send_cmd(sc, MXGEFW_CMD_SET_INTRQ_SIZE, &cmd);
|
|
cmd.data0 = MXGE_LOWPART_TO_U32(sc->rx_done.dma.bus_addr);
|
|
cmd.data1 = MXGE_HIGHPART_TO_U32(sc->rx_done.dma.bus_addr);
|
|
status |= mxge_send_cmd(sc, MXGEFW_CMD_SET_INTRQ_DMA, &cmd);
|
|
|
|
status |= mxge_send_cmd(sc,
|
|
MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET, &cmd);
|
|
|
|
|
|
sc->intr_coal_delay_ptr = (volatile uint32_t *)(sc->sram + cmd.data0);
|
|
|
|
status |= mxge_send_cmd(sc, MXGEFW_CMD_GET_IRQ_ACK_OFFSET, &cmd);
|
|
sc->irq_claim = (volatile uint32_t *)(sc->sram + cmd.data0);
|
|
|
|
|
|
status |= mxge_send_cmd(sc, MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET,
|
|
&cmd);
|
|
sc->irq_deassert = (volatile uint32_t *)(sc->sram + cmd.data0);
|
|
if (status != 0) {
|
|
device_printf(sc->dev, "failed set interrupt parameters\n");
|
|
return status;
|
|
}
|
|
|
|
|
|
*sc->intr_coal_delay_ptr = htobe32(sc->intr_coal_delay);
|
|
|
|
|
|
/* run a DMA benchmark */
|
|
sc->read_dma = sc->write_dma = sc->read_write_dma = 0;
|
|
status = mxge_dma_alloc(sc, &dmabench_dma, 4096, 4096);
|
|
if (status)
|
|
goto dmabench_fail;
|
|
|
|
/* Read DMA */
|
|
cmd.data0 = MXGE_LOWPART_TO_U32(dmabench_dma.bus_addr);
|
|
cmd.data1 = MXGE_HIGHPART_TO_U32(dmabench_dma.bus_addr);
|
|
cmd.data2 = sc->tx.boundary * 0x10000;
|
|
|
|
status = mxge_send_cmd(sc, MXGEFW_DMA_TEST, &cmd);
|
|
if (status != 0)
|
|
device_printf(sc->dev, "read dma benchmark failed\n");
|
|
else
|
|
sc->read_dma = ((cmd.data0>>16) * sc->tx.boundary * 2) /
|
|
(cmd.data0 & 0xffff);
|
|
|
|
/* Write DMA */
|
|
cmd.data0 = MXGE_LOWPART_TO_U32(dmabench_dma.bus_addr);
|
|
cmd.data1 = MXGE_HIGHPART_TO_U32(dmabench_dma.bus_addr);
|
|
cmd.data2 = sc->tx.boundary * 0x1;
|
|
status = mxge_send_cmd(sc, MXGEFW_DMA_TEST, &cmd);
|
|
if (status != 0)
|
|
device_printf(sc->dev, "write dma benchmark failed\n");
|
|
else
|
|
sc->write_dma = ((cmd.data0>>16) * sc->tx.boundary * 2) /
|
|
(cmd.data0 & 0xffff);
|
|
/* Read/Write DMA */
|
|
cmd.data0 = MXGE_LOWPART_TO_U32(dmabench_dma.bus_addr);
|
|
cmd.data1 = MXGE_HIGHPART_TO_U32(dmabench_dma.bus_addr);
|
|
cmd.data2 = sc->tx.boundary * 0x10001;
|
|
status = mxge_send_cmd(sc, MXGEFW_DMA_TEST, &cmd);
|
|
if (status != 0)
|
|
device_printf(sc->dev, "read/write dma benchmark failed\n");
|
|
else
|
|
sc->read_write_dma =
|
|
((cmd.data0>>16) * sc->tx.boundary * 2 * 2) /
|
|
(cmd.data0 & 0xffff);
|
|
|
|
mxge_dma_free(&dmabench_dma);
|
|
|
|
dmabench_fail:
|
|
/* reset mcp/driver shared state back to 0 */
|
|
bzero(sc->rx_done.entry, bytes);
|
|
sc->rx_done.idx = 0;
|
|
sc->rx_done.cnt = 0;
|
|
sc->tx.req = 0;
|
|
sc->tx.done = 0;
|
|
sc->tx.pkt_done = 0;
|
|
sc->rx_big.cnt = 0;
|
|
sc->rx_small.cnt = 0;
|
|
sc->rdma_tags_available = 15;
|
|
status = mxge_update_mac_address(sc);
|
|
mxge_change_promisc(sc, 0);
|
|
mxge_change_pause(sc, sc->pause);
|
|
return status;
|
|
}
|
|
|
|
static int
|
|
mxge_change_intr_coal(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
mxge_softc_t *sc;
|
|
unsigned int intr_coal_delay;
|
|
int err;
|
|
|
|
sc = arg1;
|
|
intr_coal_delay = sc->intr_coal_delay;
|
|
err = sysctl_handle_int(oidp, &intr_coal_delay, arg2, req);
|
|
if (err != 0) {
|
|
return err;
|
|
}
|
|
if (intr_coal_delay == sc->intr_coal_delay)
|
|
return 0;
|
|
|
|
if (intr_coal_delay == 0 || intr_coal_delay > 1000*1000)
|
|
return EINVAL;
|
|
|
|
sx_xlock(&sc->driver_lock);
|
|
*sc->intr_coal_delay_ptr = htobe32(intr_coal_delay);
|
|
sc->intr_coal_delay = intr_coal_delay;
|
|
|
|
sx_xunlock(&sc->driver_lock);
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
mxge_change_flow_control(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
mxge_softc_t *sc;
|
|
unsigned int enabled;
|
|
int err;
|
|
|
|
sc = arg1;
|
|
enabled = sc->pause;
|
|
err = sysctl_handle_int(oidp, &enabled, arg2, req);
|
|
if (err != 0) {
|
|
return err;
|
|
}
|
|
if (enabled == sc->pause)
|
|
return 0;
|
|
|
|
sx_xlock(&sc->driver_lock);
|
|
err = mxge_change_pause(sc, enabled);
|
|
sx_xunlock(&sc->driver_lock);
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
mxge_handle_be32(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int err;
|
|
|
|
if (arg1 == NULL)
|
|
return EFAULT;
|
|
arg2 = be32toh(*(int *)arg1);
|
|
arg1 = NULL;
|
|
err = sysctl_handle_int(oidp, arg1, arg2, req);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void
|
|
mxge_add_sysctls(mxge_softc_t *sc)
|
|
{
|
|
struct sysctl_ctx_list *ctx;
|
|
struct sysctl_oid_list *children;
|
|
mcp_irq_data_t *fw;
|
|
|
|
ctx = device_get_sysctl_ctx(sc->dev);
|
|
children = SYSCTL_CHILDREN(device_get_sysctl_tree(sc->dev));
|
|
fw = sc->fw_stats;
|
|
|
|
/* random information */
|
|
SYSCTL_ADD_STRING(ctx, children, OID_AUTO,
|
|
"firmware_version",
|
|
CTLFLAG_RD, &sc->fw_version,
|
|
0, "firmware version");
|
|
SYSCTL_ADD_STRING(ctx, children, OID_AUTO,
|
|
"serial_number",
|
|
CTLFLAG_RD, &sc->serial_number_string,
|
|
0, "serial number");
|
|
SYSCTL_ADD_STRING(ctx, children, OID_AUTO,
|
|
"product_code",
|
|
CTLFLAG_RD, &sc->product_code_string,
|
|
0, "product_code");
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"tx_boundary",
|
|
CTLFLAG_RD, &sc->tx.boundary,
|
|
0, "tx_boundary");
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"write_combine",
|
|
CTLFLAG_RD, &sc->wc,
|
|
0, "write combining PIO?");
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"read_dma_MBs",
|
|
CTLFLAG_RD, &sc->read_dma,
|
|
0, "DMA Read speed in MB/s");
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"write_dma_MBs",
|
|
CTLFLAG_RD, &sc->write_dma,
|
|
0, "DMA Write speed in MB/s");
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"read_write_dma_MBs",
|
|
CTLFLAG_RD, &sc->read_write_dma,
|
|
0, "DMA concurrent Read/Write speed in MB/s");
|
|
|
|
|
|
/* performance related tunables */
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"intr_coal_delay",
|
|
CTLTYPE_INT|CTLFLAG_RW, sc,
|
|
0, mxge_change_intr_coal,
|
|
"I", "interrupt coalescing delay in usecs");
|
|
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"flow_control_enabled",
|
|
CTLTYPE_INT|CTLFLAG_RW, sc,
|
|
0, mxge_change_flow_control,
|
|
"I", "interrupt coalescing delay in usecs");
|
|
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"deassert_wait",
|
|
CTLFLAG_RW, &mxge_deassert_wait,
|
|
0, "Wait for IRQ line to go low in ihandler");
|
|
|
|
/* stats block from firmware is in network byte order.
|
|
Need to swap it */
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"link_up",
|
|
CTLTYPE_INT|CTLFLAG_RD, &fw->link_up,
|
|
0, mxge_handle_be32,
|
|
"I", "link up");
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"rdma_tags_available",
|
|
CTLTYPE_INT|CTLFLAG_RD, &fw->rdma_tags_available,
|
|
0, mxge_handle_be32,
|
|
"I", "rdma_tags_available");
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"dropped_link_overflow",
|
|
CTLTYPE_INT|CTLFLAG_RD, &fw->dropped_link_overflow,
|
|
0, mxge_handle_be32,
|
|
"I", "dropped_link_overflow");
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"dropped_link_error_or_filtered",
|
|
CTLTYPE_INT|CTLFLAG_RD,
|
|
&fw->dropped_link_error_or_filtered,
|
|
0, mxge_handle_be32,
|
|
"I", "dropped_link_error_or_filtered");
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"dropped_runt",
|
|
CTLTYPE_INT|CTLFLAG_RD, &fw->dropped_runt,
|
|
0, mxge_handle_be32,
|
|
"I", "dropped_runt");
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"dropped_overrun",
|
|
CTLTYPE_INT|CTLFLAG_RD, &fw->dropped_overrun,
|
|
0, mxge_handle_be32,
|
|
"I", "dropped_overrun");
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"dropped_no_small_buffer",
|
|
CTLTYPE_INT|CTLFLAG_RD,
|
|
&fw->dropped_no_small_buffer,
|
|
0, mxge_handle_be32,
|
|
"I", "dropped_no_small_buffer");
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"dropped_no_big_buffer",
|
|
CTLTYPE_INT|CTLFLAG_RD, &fw->dropped_no_big_buffer,
|
|
0, mxge_handle_be32,
|
|
"I", "dropped_no_big_buffer");
|
|
|
|
/* host counters exported for debugging */
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"rx_small_cnt",
|
|
CTLFLAG_RD, &sc->rx_small.cnt,
|
|
0, "rx_small_cnt");
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"rx_big_cnt",
|
|
CTLFLAG_RD, &sc->rx_big.cnt,
|
|
0, "rx_small_cnt");
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"tx_req",
|
|
CTLFLAG_RD, &sc->tx.req,
|
|
0, "tx_req");
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"tx_done",
|
|
CTLFLAG_RD, &sc->tx.done,
|
|
0, "tx_done");
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"tx_pkt_done",
|
|
CTLFLAG_RD, &sc->tx.pkt_done,
|
|
0, "tx_done");
|
|
|
|
/* verbose printing? */
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"verbose",
|
|
CTLFLAG_RW, &mxge_verbose,
|
|
0, "verbose printing");
|
|
|
|
}
|
|
|
|
/* copy an array of mcp_kreq_ether_send_t's to the mcp. Copy
|
|
backwards one at a time and handle ring wraps */
|
|
|
|
static inline void
|
|
mxge_submit_req_backwards(mxge_tx_buf_t *tx,
|
|
mcp_kreq_ether_send_t *src, int cnt)
|
|
{
|
|
int idx, starting_slot;
|
|
starting_slot = tx->req;
|
|
while (cnt > 1) {
|
|
cnt--;
|
|
idx = (starting_slot + cnt) & tx->mask;
|
|
mxge_pio_copy(&tx->lanai[idx],
|
|
&src[cnt], sizeof(*src));
|
|
mb();
|
|
}
|
|
}
|
|
|
|
/*
|
|
* copy an array of mcp_kreq_ether_send_t's to the mcp. Copy
|
|
* at most 32 bytes at a time, so as to avoid involving the software
|
|
* pio handler in the nic. We re-write the first segment's flags
|
|
* to mark them valid only after writing the entire chain
|
|
*/
|
|
|
|
static inline void
|
|
mxge_submit_req(mxge_tx_buf_t *tx, mcp_kreq_ether_send_t *src,
|
|
int cnt)
|
|
{
|
|
int idx, i;
|
|
uint32_t *src_ints;
|
|
volatile uint32_t *dst_ints;
|
|
mcp_kreq_ether_send_t *srcp;
|
|
volatile mcp_kreq_ether_send_t *dstp, *dst;
|
|
uint8_t last_flags;
|
|
|
|
idx = tx->req & tx->mask;
|
|
|
|
last_flags = src->flags;
|
|
src->flags = 0;
|
|
mb();
|
|
dst = dstp = &tx->lanai[idx];
|
|
srcp = src;
|
|
|
|
if ((idx + cnt) < tx->mask) {
|
|
for (i = 0; i < (cnt - 1); i += 2) {
|
|
mxge_pio_copy(dstp, srcp, 2 * sizeof(*src));
|
|
mb(); /* force write every 32 bytes */
|
|
srcp += 2;
|
|
dstp += 2;
|
|
}
|
|
} else {
|
|
/* submit all but the first request, and ensure
|
|
that it is submitted below */
|
|
mxge_submit_req_backwards(tx, src, cnt);
|
|
i = 0;
|
|
}
|
|
if (i < cnt) {
|
|
/* submit the first request */
|
|
mxge_pio_copy(dstp, srcp, sizeof(*src));
|
|
mb(); /* barrier before setting valid flag */
|
|
}
|
|
|
|
/* re-write the last 32-bits with the valid flags */
|
|
src->flags = last_flags;
|
|
src_ints = (uint32_t *)src;
|
|
src_ints+=3;
|
|
dst_ints = (volatile uint32_t *)dst;
|
|
dst_ints+=3;
|
|
*dst_ints = *src_ints;
|
|
tx->req += cnt;
|
|
mb();
|
|
}
|
|
|
|
static inline void
|
|
mxge_submit_req_wc(mxge_tx_buf_t *tx, mcp_kreq_ether_send_t *src, int cnt)
|
|
{
|
|
tx->req += cnt;
|
|
mb();
|
|
while (cnt >= 4) {
|
|
mxge_pio_copy((volatile char *)tx->wc_fifo, src, 64);
|
|
mb();
|
|
src += 4;
|
|
cnt -= 4;
|
|
}
|
|
if (cnt > 0) {
|
|
/* pad it to 64 bytes. The src is 64 bytes bigger than it
|
|
needs to be so that we don't overrun it */
|
|
mxge_pio_copy(tx->wc_fifo + (cnt<<18), src, 64);
|
|
mb();
|
|
}
|
|
}
|
|
|
|
static void
|
|
mxge_encap(mxge_softc_t *sc, struct mbuf *m)
|
|
{
|
|
mcp_kreq_ether_send_t *req;
|
|
bus_dma_segment_t seg_list[MXGE_MAX_SEND_DESC];
|
|
bus_dma_segment_t *seg;
|
|
struct mbuf *m_tmp;
|
|
struct ifnet *ifp;
|
|
mxge_tx_buf_t *tx;
|
|
struct ether_header *eh;
|
|
struct ip *ip;
|
|
int cnt, cum_len, err, i, idx;
|
|
uint16_t flags, pseudo_hdr_offset;
|
|
uint8_t cksum_offset;
|
|
|
|
|
|
|
|
ifp = sc->ifp;
|
|
tx = &sc->tx;
|
|
|
|
/* (try to) map the frame for DMA */
|
|
idx = tx->req & tx->mask;
|
|
err = bus_dmamap_load_mbuf_sg(tx->dmat, tx->info[idx].map,
|
|
m, seg_list, &cnt,
|
|
BUS_DMA_NOWAIT);
|
|
if (err == EFBIG) {
|
|
/* Too many segments in the chain. Try
|
|
to defrag */
|
|
m_tmp = m_defrag(m, M_NOWAIT);
|
|
if (m_tmp == NULL) {
|
|
goto drop;
|
|
}
|
|
m = m_tmp;
|
|
err = bus_dmamap_load_mbuf_sg(tx->dmat,
|
|
tx->info[idx].map,
|
|
m, seg_list, &cnt,
|
|
BUS_DMA_NOWAIT);
|
|
}
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "bus_dmamap_load_mbuf_sg returned %d\n",
|
|
err);
|
|
goto drop;
|
|
}
|
|
bus_dmamap_sync(tx->dmat, tx->info[idx].map,
|
|
BUS_DMASYNC_PREWRITE);
|
|
tx->info[idx].m = m;
|
|
|
|
req = tx->req_list;
|
|
cksum_offset = 0;
|
|
pseudo_hdr_offset = 0;
|
|
flags = MXGEFW_FLAGS_NO_TSO;
|
|
|
|
/* checksum offloading? */
|
|
if (m->m_pkthdr.csum_flags & (CSUM_DELAY_DATA)) {
|
|
eh = mtod(m, struct ether_header *);
|
|
ip = (struct ip *) (eh + 1);
|
|
cksum_offset = sizeof(*eh) + (ip->ip_hl << 2);
|
|
pseudo_hdr_offset = cksum_offset + m->m_pkthdr.csum_data;
|
|
pseudo_hdr_offset = htobe16(pseudo_hdr_offset);
|
|
req->cksum_offset = cksum_offset;
|
|
flags |= MXGEFW_FLAGS_CKSUM;
|
|
}
|
|
if (m->m_pkthdr.len < MXGEFW_SEND_SMALL_SIZE)
|
|
flags |= MXGEFW_FLAGS_SMALL;
|
|
|
|
/* convert segments into a request list */
|
|
cum_len = 0;
|
|
seg = seg_list;
|
|
req->flags = MXGEFW_FLAGS_FIRST;
|
|
for (i = 0; i < cnt; i++) {
|
|
req->addr_low =
|
|
htobe32(MXGE_LOWPART_TO_U32(seg->ds_addr));
|
|
req->addr_high =
|
|
htobe32(MXGE_HIGHPART_TO_U32(seg->ds_addr));
|
|
req->length = htobe16(seg->ds_len);
|
|
req->cksum_offset = cksum_offset;
|
|
if (cksum_offset > seg->ds_len)
|
|
cksum_offset -= seg->ds_len;
|
|
else
|
|
cksum_offset = 0;
|
|
req->pseudo_hdr_offset = pseudo_hdr_offset;
|
|
req->pad = 0; /* complete solid 16-byte block */
|
|
req->rdma_count = 1;
|
|
req->flags |= flags | ((cum_len & 1) * MXGEFW_FLAGS_ALIGN_ODD);
|
|
cum_len += seg->ds_len;
|
|
seg++;
|
|
req++;
|
|
req->flags = 0;
|
|
}
|
|
req--;
|
|
/* pad runts to 60 bytes */
|
|
if (cum_len < 60) {
|
|
req++;
|
|
req->addr_low =
|
|
htobe32(MXGE_LOWPART_TO_U32(sc->zeropad_dma.bus_addr));
|
|
req->addr_high =
|
|
htobe32(MXGE_HIGHPART_TO_U32(sc->zeropad_dma.bus_addr));
|
|
req->length = htobe16(60 - cum_len);
|
|
req->cksum_offset = 0;
|
|
req->pseudo_hdr_offset = pseudo_hdr_offset;
|
|
req->pad = 0; /* complete solid 16-byte block */
|
|
req->rdma_count = 1;
|
|
req->flags |= flags | ((cum_len & 1) * MXGEFW_FLAGS_ALIGN_ODD);
|
|
cnt++;
|
|
}
|
|
|
|
tx->req_list[0].rdma_count = cnt;
|
|
#if 0
|
|
/* print what the firmware will see */
|
|
for (i = 0; i < cnt; i++) {
|
|
printf("%d: addr: 0x%x 0x%x len:%d pso%d,"
|
|
"cso:%d, flags:0x%x, rdma:%d\n",
|
|
i, (int)ntohl(tx->req_list[i].addr_high),
|
|
(int)ntohl(tx->req_list[i].addr_low),
|
|
(int)ntohs(tx->req_list[i].length),
|
|
(int)ntohs(tx->req_list[i].pseudo_hdr_offset),
|
|
tx->req_list[i].cksum_offset, tx->req_list[i].flags,
|
|
tx->req_list[i].rdma_count);
|
|
}
|
|
printf("--------------\n");
|
|
#endif
|
|
tx->info[((cnt - 1) + tx->req) & tx->mask].flag = 1;
|
|
if (tx->wc_fifo == NULL)
|
|
mxge_submit_req(tx, tx->req_list, cnt);
|
|
else
|
|
mxge_submit_req_wc(tx, tx->req_list, cnt);
|
|
return;
|
|
|
|
drop:
|
|
m_freem(m);
|
|
ifp->if_oerrors++;
|
|
return;
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline void
|
|
mxge_start_locked(mxge_softc_t *sc)
|
|
{
|
|
struct mbuf *m;
|
|
struct ifnet *ifp;
|
|
|
|
ifp = sc->ifp;
|
|
while ((sc->tx.mask - (sc->tx.req - sc->tx.done))
|
|
> MXGE_MAX_SEND_DESC) {
|
|
|
|
IFQ_DRV_DEQUEUE(&ifp->if_snd, m);
|
|
if (m == NULL) {
|
|
return;
|
|
}
|
|
/* let BPF see it */
|
|
BPF_MTAP(ifp, m);
|
|
|
|
/* give it to the nic */
|
|
mxge_encap(sc, m);
|
|
}
|
|
/* ran out of transmit slots */
|
|
sc->ifp->if_drv_flags |= IFF_DRV_OACTIVE;
|
|
}
|
|
|
|
static void
|
|
mxge_start(struct ifnet *ifp)
|
|
{
|
|
mxge_softc_t *sc = ifp->if_softc;
|
|
|
|
|
|
mtx_lock(&sc->tx_lock);
|
|
mxge_start_locked(sc);
|
|
mtx_unlock(&sc->tx_lock);
|
|
}
|
|
|
|
/*
|
|
* copy an array of mcp_kreq_ether_recv_t's to the mcp. Copy
|
|
* at most 32 bytes at a time, so as to avoid involving the software
|
|
* pio handler in the nic. We re-write the first segment's low
|
|
* DMA address to mark it valid only after we write the entire chunk
|
|
* in a burst
|
|
*/
|
|
static inline void
|
|
mxge_submit_8rx(volatile mcp_kreq_ether_recv_t *dst,
|
|
mcp_kreq_ether_recv_t *src)
|
|
{
|
|
uint32_t low;
|
|
|
|
low = src->addr_low;
|
|
src->addr_low = 0xffffffff;
|
|
mxge_pio_copy(dst, src, 8 * sizeof (*src));
|
|
mb();
|
|
dst->addr_low = low;
|
|
mb();
|
|
}
|
|
|
|
static int
|
|
mxge_get_buf_small(mxge_softc_t *sc, bus_dmamap_t map, int idx)
|
|
{
|
|
bus_dma_segment_t seg;
|
|
struct mbuf *m;
|
|
mxge_rx_buf_t *rx = &sc->rx_small;
|
|
int cnt, err;
|
|
|
|
m = m_gethdr(M_DONTWAIT, MT_DATA);
|
|
if (m == NULL) {
|
|
rx->alloc_fail++;
|
|
err = ENOBUFS;
|
|
goto done;
|
|
}
|
|
m->m_len = MHLEN;
|
|
err = bus_dmamap_load_mbuf_sg(rx->dmat, map, m,
|
|
&seg, &cnt, BUS_DMA_NOWAIT);
|
|
if (err != 0) {
|
|
m_free(m);
|
|
goto done;
|
|
}
|
|
rx->info[idx].m = m;
|
|
rx->shadow[idx].addr_low =
|
|
htobe32(MXGE_LOWPART_TO_U32(seg.ds_addr));
|
|
rx->shadow[idx].addr_high =
|
|
htobe32(MXGE_HIGHPART_TO_U32(seg.ds_addr));
|
|
|
|
done:
|
|
if ((idx & 7) == 7) {
|
|
if (rx->wc_fifo == NULL)
|
|
mxge_submit_8rx(&rx->lanai[idx - 7],
|
|
&rx->shadow[idx - 7]);
|
|
else {
|
|
mb();
|
|
mxge_pio_copy(rx->wc_fifo, &rx->shadow[idx - 7], 64);
|
|
}
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
mxge_get_buf_big(mxge_softc_t *sc, bus_dmamap_t map, int idx)
|
|
{
|
|
bus_dma_segment_t seg;
|
|
struct mbuf *m;
|
|
mxge_rx_buf_t *rx = &sc->rx_big;
|
|
int cnt, err;
|
|
|
|
m = m_getjcl(M_DONTWAIT, MT_DATA, M_PKTHDR, sc->big_bytes);
|
|
if (m == NULL) {
|
|
rx->alloc_fail++;
|
|
err = ENOBUFS;
|
|
goto done;
|
|
}
|
|
m->m_len = sc->big_bytes;
|
|
err = bus_dmamap_load_mbuf_sg(rx->dmat, map, m,
|
|
&seg, &cnt, BUS_DMA_NOWAIT);
|
|
if (err != 0) {
|
|
m_free(m);
|
|
goto done;
|
|
}
|
|
rx->info[idx].m = m;
|
|
rx->shadow[idx].addr_low =
|
|
htobe32(MXGE_LOWPART_TO_U32(seg.ds_addr));
|
|
rx->shadow[idx].addr_high =
|
|
htobe32(MXGE_HIGHPART_TO_U32(seg.ds_addr));
|
|
|
|
done:
|
|
if ((idx & 7) == 7) {
|
|
if (rx->wc_fifo == NULL)
|
|
mxge_submit_8rx(&rx->lanai[idx - 7],
|
|
&rx->shadow[idx - 7]);
|
|
else {
|
|
mb();
|
|
mxge_pio_copy(rx->wc_fifo, &rx->shadow[idx - 7], 64);
|
|
}
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static inline void
|
|
mxge_rx_csum(struct mbuf *m, int csum)
|
|
{
|
|
struct ether_header *eh;
|
|
struct ip *ip;
|
|
|
|
eh = mtod(m, struct ether_header *);
|
|
if (__predict_true(eh->ether_type == htons(ETHERTYPE_IP))) {
|
|
ip = (struct ip *)(eh + 1);
|
|
if (__predict_true(ip->ip_p == IPPROTO_TCP ||
|
|
ip->ip_p == IPPROTO_UDP)) {
|
|
m->m_pkthdr.csum_data = csum;
|
|
m->m_pkthdr.csum_flags = CSUM_DATA_VALID;
|
|
}
|
|
}
|
|
}
|
|
|
|
static inline void
|
|
mxge_rx_done_big(mxge_softc_t *sc, int len, int csum)
|
|
{
|
|
struct ifnet *ifp;
|
|
struct mbuf *m = 0; /* -Wunitialized */
|
|
struct mbuf *m_prev = 0; /* -Wunitialized */
|
|
struct mbuf *m_head = 0;
|
|
bus_dmamap_t old_map;
|
|
mxge_rx_buf_t *rx;
|
|
int idx;
|
|
|
|
|
|
rx = &sc->rx_big;
|
|
ifp = sc->ifp;
|
|
while (len > 0) {
|
|
idx = rx->cnt & rx->mask;
|
|
rx->cnt++;
|
|
/* save a pointer to the received mbuf */
|
|
m = rx->info[idx].m;
|
|
/* try to replace the received mbuf */
|
|
if (mxge_get_buf_big(sc, rx->extra_map, idx)) {
|
|
goto drop;
|
|
}
|
|
/* unmap the received buffer */
|
|
old_map = rx->info[idx].map;
|
|
bus_dmamap_sync(rx->dmat, old_map, BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(rx->dmat, old_map);
|
|
|
|
/* swap the bus_dmamap_t's */
|
|
rx->info[idx].map = rx->extra_map;
|
|
rx->extra_map = old_map;
|
|
|
|
/* chain multiple segments together */
|
|
if (!m_head) {
|
|
m_head = m;
|
|
/* mcp implicitly skips 1st bytes so that
|
|
* packet is properly aligned */
|
|
m->m_data += MXGEFW_PAD;
|
|
m->m_pkthdr.len = len;
|
|
m->m_len = sc->big_bytes - MXGEFW_PAD;
|
|
} else {
|
|
m->m_len = sc->big_bytes;
|
|
m->m_flags &= ~M_PKTHDR;
|
|
m_prev->m_next = m;
|
|
}
|
|
len -= m->m_len;
|
|
m_prev = m;
|
|
}
|
|
|
|
/* trim trailing garbage from the last mbuf in the chain. If
|
|
* there is any garbage, len will be negative */
|
|
m->m_len += len;
|
|
|
|
/* if the checksum is valid, mark it in the mbuf header */
|
|
if (sc->csum_flag)
|
|
mxge_rx_csum(m_head, csum);
|
|
|
|
/* pass the frame up the stack */
|
|
m_head->m_pkthdr.rcvif = ifp;
|
|
ifp->if_ipackets++;
|
|
(*ifp->if_input)(ifp, m_head);
|
|
return;
|
|
|
|
drop:
|
|
/* drop the frame -- the old mbuf(s) are re-cycled by running
|
|
every slot through the allocator */
|
|
if (m_head) {
|
|
len -= sc->big_bytes;
|
|
m_freem(m_head);
|
|
} else {
|
|
len -= (sc->big_bytes + MXGEFW_PAD);
|
|
}
|
|
while ((int)len > 0) {
|
|
idx = rx->cnt & rx->mask;
|
|
rx->cnt++;
|
|
m = rx->info[idx].m;
|
|
if (0 == (mxge_get_buf_big(sc, rx->extra_map, idx))) {
|
|
m_freem(m);
|
|
/* unmap the received buffer */
|
|
old_map = rx->info[idx].map;
|
|
bus_dmamap_sync(rx->dmat, old_map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(rx->dmat, old_map);
|
|
|
|
/* swap the bus_dmamap_t's */
|
|
rx->info[idx].map = rx->extra_map;
|
|
rx->extra_map = old_map;
|
|
}
|
|
len -= sc->big_bytes;
|
|
}
|
|
|
|
ifp->if_ierrors++;
|
|
|
|
}
|
|
|
|
static inline void
|
|
mxge_rx_done_small(mxge_softc_t *sc, uint32_t len, uint32_t csum)
|
|
{
|
|
struct ifnet *ifp;
|
|
struct mbuf *m;
|
|
mxge_rx_buf_t *rx;
|
|
bus_dmamap_t old_map;
|
|
int idx;
|
|
|
|
ifp = sc->ifp;
|
|
rx = &sc->rx_small;
|
|
idx = rx->cnt & rx->mask;
|
|
rx->cnt++;
|
|
/* save a pointer to the received mbuf */
|
|
m = rx->info[idx].m;
|
|
/* try to replace the received mbuf */
|
|
if (mxge_get_buf_small(sc, rx->extra_map, idx)) {
|
|
/* drop the frame -- the old mbuf is re-cycled */
|
|
ifp->if_ierrors++;
|
|
return;
|
|
}
|
|
|
|
/* unmap the received buffer */
|
|
old_map = rx->info[idx].map;
|
|
bus_dmamap_sync(rx->dmat, old_map, BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(rx->dmat, old_map);
|
|
|
|
/* swap the bus_dmamap_t's */
|
|
rx->info[idx].map = rx->extra_map;
|
|
rx->extra_map = old_map;
|
|
|
|
/* mcp implicitly skips 1st 2 bytes so that packet is properly
|
|
* aligned */
|
|
m->m_data += MXGEFW_PAD;
|
|
|
|
/* if the checksum is valid, mark it in the mbuf header */
|
|
if (sc->csum_flag)
|
|
mxge_rx_csum(m, csum);
|
|
|
|
/* pass the frame up the stack */
|
|
m->m_pkthdr.rcvif = ifp;
|
|
m->m_len = m->m_pkthdr.len = len;
|
|
ifp->if_ipackets++;
|
|
(*ifp->if_input)(ifp, m);
|
|
}
|
|
|
|
static inline void
|
|
mxge_clean_rx_done(mxge_softc_t *sc)
|
|
{
|
|
mxge_rx_done_t *rx_done = &sc->rx_done;
|
|
int limit = 0;
|
|
uint16_t length;
|
|
uint16_t checksum;
|
|
|
|
|
|
while (rx_done->entry[rx_done->idx].length != 0) {
|
|
length = ntohs(rx_done->entry[rx_done->idx].length);
|
|
rx_done->entry[rx_done->idx].length = 0;
|
|
checksum = ntohs(rx_done->entry[rx_done->idx].checksum);
|
|
if (length <= MHLEN)
|
|
mxge_rx_done_small(sc, length, checksum);
|
|
else
|
|
mxge_rx_done_big(sc, length, checksum);
|
|
rx_done->cnt++;
|
|
rx_done->idx = rx_done->cnt & (mxge_max_intr_slots - 1);
|
|
|
|
/* limit potential for livelock */
|
|
if (__predict_false(++limit > 2 * mxge_max_intr_slots))
|
|
break;
|
|
|
|
}
|
|
}
|
|
|
|
|
|
static inline void
|
|
mxge_tx_done(mxge_softc_t *sc, uint32_t mcp_idx)
|
|
{
|
|
struct ifnet *ifp;
|
|
mxge_tx_buf_t *tx;
|
|
struct mbuf *m;
|
|
bus_dmamap_t map;
|
|
int idx, limit;
|
|
|
|
limit = 0;
|
|
tx = &sc->tx;
|
|
ifp = sc->ifp;
|
|
while (tx->pkt_done != mcp_idx) {
|
|
idx = tx->done & tx->mask;
|
|
tx->done++;
|
|
m = tx->info[idx].m;
|
|
/* mbuf and DMA map only attached to the first
|
|
segment per-mbuf */
|
|
if (m != NULL) {
|
|
ifp->if_opackets++;
|
|
tx->info[idx].m = NULL;
|
|
map = tx->info[idx].map;
|
|
bus_dmamap_unload(tx->dmat, map);
|
|
m_freem(m);
|
|
}
|
|
if (tx->info[idx].flag) {
|
|
tx->info[idx].flag = 0;
|
|
tx->pkt_done++;
|
|
}
|
|
/* limit potential for livelock by only handling
|
|
2 full tx rings per call */
|
|
if (__predict_false(++limit > 2 * tx->mask))
|
|
break;
|
|
}
|
|
|
|
/* If we have space, clear IFF_OACTIVE to tell the stack that
|
|
its OK to send packets */
|
|
|
|
if (ifp->if_drv_flags & IFF_DRV_OACTIVE &&
|
|
tx->req - tx->done < (tx->mask + 1)/4) {
|
|
mtx_lock(&sc->tx_lock);
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
mxge_start_locked(sc);
|
|
mtx_unlock(&sc->tx_lock);
|
|
}
|
|
}
|
|
|
|
static void
|
|
mxge_intr(void *arg)
|
|
{
|
|
mxge_softc_t *sc = arg;
|
|
mcp_irq_data_t *stats = sc->fw_stats;
|
|
mxge_tx_buf_t *tx = &sc->tx;
|
|
mxge_rx_done_t *rx_done = &sc->rx_done;
|
|
uint32_t send_done_count;
|
|
uint8_t valid;
|
|
|
|
|
|
/* make sure the DMA has finished */
|
|
if (!stats->valid) {
|
|
return;
|
|
}
|
|
valid = stats->valid;
|
|
|
|
/* lower legacy IRQ */
|
|
*sc->irq_deassert = 0;
|
|
mb();
|
|
if (!mxge_deassert_wait)
|
|
/* don't wait for conf. that irq is low */
|
|
stats->valid = 0;
|
|
do {
|
|
/* check for transmit completes and receives */
|
|
send_done_count = be32toh(stats->send_done_count);
|
|
while ((send_done_count != tx->pkt_done) ||
|
|
(rx_done->entry[rx_done->idx].length != 0)) {
|
|
mxge_tx_done(sc, (int)send_done_count);
|
|
mxge_clean_rx_done(sc);
|
|
send_done_count = be32toh(stats->send_done_count);
|
|
}
|
|
} while (*((volatile uint8_t *) &stats->valid));
|
|
|
|
if (__predict_false(stats->stats_updated)) {
|
|
if (sc->link_state != stats->link_up) {
|
|
sc->link_state = stats->link_up;
|
|
if (sc->link_state) {
|
|
if_link_state_change(sc->ifp, LINK_STATE_UP);
|
|
if (mxge_verbose)
|
|
device_printf(sc->dev, "link up\n");
|
|
} else {
|
|
if_link_state_change(sc->ifp, LINK_STATE_DOWN);
|
|
if (mxge_verbose)
|
|
device_printf(sc->dev, "link down\n");
|
|
}
|
|
}
|
|
if (sc->rdma_tags_available !=
|
|
be32toh(sc->fw_stats->rdma_tags_available)) {
|
|
sc->rdma_tags_available =
|
|
be32toh(sc->fw_stats->rdma_tags_available);
|
|
device_printf(sc->dev, "RDMA timed out! %d tags "
|
|
"left\n", sc->rdma_tags_available);
|
|
}
|
|
sc->down_cnt += stats->link_down;
|
|
}
|
|
|
|
/* check to see if we have rx token to pass back */
|
|
if (valid & 0x1)
|
|
*sc->irq_claim = be32toh(3);
|
|
*(sc->irq_claim + 1) = be32toh(3);
|
|
}
|
|
|
|
static void
|
|
mxge_watchdog(struct ifnet *ifp)
|
|
{
|
|
printf("%s called\n", __FUNCTION__);
|
|
}
|
|
|
|
static void
|
|
mxge_init(void *arg)
|
|
{
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
mxge_free_mbufs(mxge_softc_t *sc)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i <= sc->rx_big.mask; i++) {
|
|
if (sc->rx_big.info[i].m == NULL)
|
|
continue;
|
|
bus_dmamap_unload(sc->rx_big.dmat,
|
|
sc->rx_big.info[i].map);
|
|
m_freem(sc->rx_big.info[i].m);
|
|
sc->rx_big.info[i].m = NULL;
|
|
}
|
|
|
|
for (i = 0; i <= sc->rx_big.mask; i++) {
|
|
if (sc->rx_big.info[i].m == NULL)
|
|
continue;
|
|
bus_dmamap_unload(sc->rx_big.dmat,
|
|
sc->rx_big.info[i].map);
|
|
m_freem(sc->rx_big.info[i].m);
|
|
sc->rx_big.info[i].m = NULL;
|
|
}
|
|
|
|
for (i = 0; i <= sc->tx.mask; i++) {
|
|
if (sc->tx.info[i].m == NULL)
|
|
continue;
|
|
bus_dmamap_unload(sc->tx.dmat,
|
|
sc->tx.info[i].map);
|
|
m_freem(sc->tx.info[i].m);
|
|
sc->tx.info[i].m = NULL;
|
|
}
|
|
}
|
|
|
|
static void
|
|
mxge_free_rings(mxge_softc_t *sc)
|
|
{
|
|
int i;
|
|
|
|
if (sc->tx.req_bytes != NULL) {
|
|
free(sc->tx.req_bytes, M_DEVBUF);
|
|
}
|
|
if (sc->rx_small.shadow != NULL)
|
|
free(sc->rx_small.shadow, M_DEVBUF);
|
|
if (sc->rx_big.shadow != NULL)
|
|
free(sc->rx_big.shadow, M_DEVBUF);
|
|
if (sc->tx.info != NULL) {
|
|
for (i = 0; i <= sc->tx.mask; i++) {
|
|
if (sc->tx.info[i].map != NULL)
|
|
bus_dmamap_destroy(sc->tx.dmat,
|
|
sc->tx.info[i].map);
|
|
}
|
|
free(sc->tx.info, M_DEVBUF);
|
|
}
|
|
if (sc->rx_small.info != NULL) {
|
|
for (i = 0; i <= sc->rx_small.mask; i++) {
|
|
if (sc->rx_small.info[i].map != NULL)
|
|
bus_dmamap_destroy(sc->rx_small.dmat,
|
|
sc->rx_small.info[i].map);
|
|
}
|
|
free(sc->rx_small.info, M_DEVBUF);
|
|
}
|
|
if (sc->rx_big.info != NULL) {
|
|
for (i = 0; i <= sc->rx_big.mask; i++) {
|
|
if (sc->rx_big.info[i].map != NULL)
|
|
bus_dmamap_destroy(sc->rx_big.dmat,
|
|
sc->rx_big.info[i].map);
|
|
}
|
|
free(sc->rx_big.info, M_DEVBUF);
|
|
}
|
|
if (sc->rx_big.extra_map != NULL)
|
|
bus_dmamap_destroy(sc->rx_big.dmat,
|
|
sc->rx_big.extra_map);
|
|
if (sc->rx_small.extra_map != NULL)
|
|
bus_dmamap_destroy(sc->rx_small.dmat,
|
|
sc->rx_small.extra_map);
|
|
if (sc->tx.dmat != NULL)
|
|
bus_dma_tag_destroy(sc->tx.dmat);
|
|
if (sc->rx_small.dmat != NULL)
|
|
bus_dma_tag_destroy(sc->rx_small.dmat);
|
|
if (sc->rx_big.dmat != NULL)
|
|
bus_dma_tag_destroy(sc->rx_big.dmat);
|
|
}
|
|
|
|
static int
|
|
mxge_alloc_rings(mxge_softc_t *sc)
|
|
{
|
|
mxge_cmd_t cmd;
|
|
int tx_ring_size, rx_ring_size;
|
|
int tx_ring_entries, rx_ring_entries;
|
|
int i, err;
|
|
unsigned long bytes;
|
|
|
|
/* get ring sizes */
|
|
err = mxge_send_cmd(sc, MXGEFW_CMD_GET_SEND_RING_SIZE, &cmd);
|
|
tx_ring_size = cmd.data0;
|
|
err |= mxge_send_cmd(sc, MXGEFW_CMD_GET_RX_RING_SIZE, &cmd);
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "Cannot determine ring sizes\n");
|
|
goto abort_with_nothing;
|
|
}
|
|
|
|
rx_ring_size = cmd.data0;
|
|
|
|
tx_ring_entries = tx_ring_size / sizeof (mcp_kreq_ether_send_t);
|
|
rx_ring_entries = rx_ring_size / sizeof (mcp_dma_addr_t);
|
|
sc->ifp->if_snd.ifq_drv_maxlen = sc->ifp->if_snd.ifq_maxlen;
|
|
IFQ_SET_MAXLEN(&sc->ifp->if_snd, tx_ring_entries - 1);
|
|
IFQ_SET_READY(&sc->ifp->if_snd);
|
|
|
|
sc->tx.mask = tx_ring_entries - 1;
|
|
sc->rx_small.mask = sc->rx_big.mask = rx_ring_entries - 1;
|
|
|
|
err = ENOMEM;
|
|
|
|
/* allocate the tx request copy block */
|
|
bytes = 8 +
|
|
sizeof (*sc->tx.req_list) * (MXGE_MAX_SEND_DESC + 4);
|
|
sc->tx.req_bytes = malloc(bytes, M_DEVBUF, M_WAITOK);
|
|
if (sc->tx.req_bytes == NULL)
|
|
goto abort_with_nothing;
|
|
/* ensure req_list entries are aligned to 8 bytes */
|
|
sc->tx.req_list = (mcp_kreq_ether_send_t *)
|
|
((unsigned long)(sc->tx.req_bytes + 7) & ~7UL);
|
|
|
|
/* allocate the rx shadow rings */
|
|
bytes = rx_ring_entries * sizeof (*sc->rx_small.shadow);
|
|
sc->rx_small.shadow = malloc(bytes, M_DEVBUF, M_ZERO|M_WAITOK);
|
|
if (sc->rx_small.shadow == NULL)
|
|
goto abort_with_alloc;
|
|
|
|
bytes = rx_ring_entries * sizeof (*sc->rx_big.shadow);
|
|
sc->rx_big.shadow = malloc(bytes, M_DEVBUF, M_ZERO|M_WAITOK);
|
|
if (sc->rx_big.shadow == NULL)
|
|
goto abort_with_alloc;
|
|
|
|
/* allocate the host info rings */
|
|
bytes = tx_ring_entries * sizeof (*sc->tx.info);
|
|
sc->tx.info = malloc(bytes, M_DEVBUF, M_ZERO|M_WAITOK);
|
|
if (sc->tx.info == NULL)
|
|
goto abort_with_alloc;
|
|
|
|
bytes = rx_ring_entries * sizeof (*sc->rx_small.info);
|
|
sc->rx_small.info = malloc(bytes, M_DEVBUF, M_ZERO|M_WAITOK);
|
|
if (sc->rx_small.info == NULL)
|
|
goto abort_with_alloc;
|
|
|
|
bytes = rx_ring_entries * sizeof (*sc->rx_big.info);
|
|
sc->rx_big.info = malloc(bytes, M_DEVBUF, M_ZERO|M_WAITOK);
|
|
if (sc->rx_big.info == NULL)
|
|
goto abort_with_alloc;
|
|
|
|
/* allocate the busdma resources */
|
|
err = bus_dma_tag_create(sc->parent_dmat, /* parent */
|
|
1, /* alignment */
|
|
sc->tx.boundary, /* boundary */
|
|
BUS_SPACE_MAXADDR, /* low */
|
|
BUS_SPACE_MAXADDR, /* high */
|
|
NULL, NULL, /* filter */
|
|
MXGE_MAX_ETHER_MTU, /* maxsize */
|
|
MXGE_MAX_SEND_DESC, /* num segs */
|
|
sc->tx.boundary, /* maxsegsize */
|
|
BUS_DMA_ALLOCNOW, /* flags */
|
|
NULL, NULL, /* lock */
|
|
&sc->tx.dmat); /* tag */
|
|
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "Err %d allocating tx dmat\n",
|
|
err);
|
|
goto abort_with_alloc;
|
|
}
|
|
|
|
err = bus_dma_tag_create(sc->parent_dmat, /* parent */
|
|
1, /* alignment */
|
|
4096, /* boundary */
|
|
BUS_SPACE_MAXADDR, /* low */
|
|
BUS_SPACE_MAXADDR, /* high */
|
|
NULL, NULL, /* filter */
|
|
MHLEN, /* maxsize */
|
|
1, /* num segs */
|
|
MHLEN, /* maxsegsize */
|
|
BUS_DMA_ALLOCNOW, /* flags */
|
|
NULL, NULL, /* lock */
|
|
&sc->rx_small.dmat); /* tag */
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "Err %d allocating rx_small dmat\n",
|
|
err);
|
|
goto abort_with_alloc;
|
|
}
|
|
|
|
err = bus_dma_tag_create(sc->parent_dmat, /* parent */
|
|
1, /* alignment */
|
|
4096, /* boundary */
|
|
BUS_SPACE_MAXADDR, /* low */
|
|
BUS_SPACE_MAXADDR, /* high */
|
|
NULL, NULL, /* filter */
|
|
4096, /* maxsize */
|
|
1, /* num segs */
|
|
4096, /* maxsegsize */
|
|
BUS_DMA_ALLOCNOW, /* flags */
|
|
NULL, NULL, /* lock */
|
|
&sc->rx_big.dmat); /* tag */
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "Err %d allocating rx_big dmat\n",
|
|
err);
|
|
goto abort_with_alloc;
|
|
}
|
|
|
|
/* now use these tags to setup dmamaps for each slot
|
|
in each ring */
|
|
for (i = 0; i <= sc->tx.mask; i++) {
|
|
err = bus_dmamap_create(sc->tx.dmat, 0,
|
|
&sc->tx.info[i].map);
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "Err %d tx dmamap\n",
|
|
err);
|
|
goto abort_with_alloc;
|
|
}
|
|
}
|
|
for (i = 0; i <= sc->rx_small.mask; i++) {
|
|
err = bus_dmamap_create(sc->rx_small.dmat, 0,
|
|
&sc->rx_small.info[i].map);
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "Err %d rx_small dmamap\n",
|
|
err);
|
|
goto abort_with_alloc;
|
|
}
|
|
}
|
|
err = bus_dmamap_create(sc->rx_small.dmat, 0,
|
|
&sc->rx_small.extra_map);
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "Err %d extra rx_small dmamap\n",
|
|
err);
|
|
goto abort_with_alloc;
|
|
}
|
|
|
|
for (i = 0; i <= sc->rx_big.mask; i++) {
|
|
err = bus_dmamap_create(sc->rx_big.dmat, 0,
|
|
&sc->rx_big.info[i].map);
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "Err %d rx_big dmamap\n",
|
|
err);
|
|
goto abort_with_alloc;
|
|
}
|
|
}
|
|
err = bus_dmamap_create(sc->rx_big.dmat, 0,
|
|
&sc->rx_big.extra_map);
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "Err %d extra rx_big dmamap\n",
|
|
err);
|
|
goto abort_with_alloc;
|
|
}
|
|
return 0;
|
|
|
|
abort_with_alloc:
|
|
mxge_free_rings(sc);
|
|
|
|
abort_with_nothing:
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
mxge_open(mxge_softc_t *sc)
|
|
{
|
|
mxge_cmd_t cmd;
|
|
int i, err;
|
|
bus_dmamap_t map;
|
|
|
|
|
|
/* Copy the MAC address in case it was overridden */
|
|
bcopy(IF_LLADDR(sc->ifp), sc->mac_addr, ETHER_ADDR_LEN);
|
|
|
|
err = mxge_reset(sc);
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "failed to reset\n");
|
|
return EIO;
|
|
}
|
|
|
|
if (MCLBYTES >=
|
|
sc->ifp->if_mtu + ETHER_HDR_LEN + MXGEFW_PAD)
|
|
sc->big_bytes = MCLBYTES;
|
|
else
|
|
sc->big_bytes = MJUMPAGESIZE;
|
|
|
|
err = mxge_alloc_rings(sc);
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "failed to allocate rings\n");
|
|
return err;
|
|
}
|
|
|
|
err = bus_setup_intr(sc->dev, sc->irq_res,
|
|
INTR_TYPE_NET | INTR_MPSAFE,
|
|
mxge_intr, sc, &sc->ih);
|
|
if (err != 0) {
|
|
goto abort_with_rings;
|
|
}
|
|
|
|
/* get the lanai pointers to the send and receive rings */
|
|
|
|
err = mxge_send_cmd(sc, MXGEFW_CMD_GET_SEND_OFFSET, &cmd);
|
|
sc->tx.lanai =
|
|
(volatile mcp_kreq_ether_send_t *)(sc->sram + cmd.data0);
|
|
err |= mxge_send_cmd(sc,
|
|
MXGEFW_CMD_GET_SMALL_RX_OFFSET, &cmd);
|
|
sc->rx_small.lanai =
|
|
(volatile mcp_kreq_ether_recv_t *)(sc->sram + cmd.data0);
|
|
err |= mxge_send_cmd(sc, MXGEFW_CMD_GET_BIG_RX_OFFSET, &cmd);
|
|
sc->rx_big.lanai =
|
|
(volatile mcp_kreq_ether_recv_t *)(sc->sram + cmd.data0);
|
|
|
|
if (err != 0) {
|
|
device_printf(sc->dev,
|
|
"failed to get ring sizes or locations\n");
|
|
err = EIO;
|
|
goto abort_with_irq;
|
|
}
|
|
|
|
if (sc->wc) {
|
|
sc->tx.wc_fifo = sc->sram + 0x200000;
|
|
sc->rx_small.wc_fifo = sc->sram + 0x300000;
|
|
sc->rx_big.wc_fifo = sc->sram + 0x340000;
|
|
} else {
|
|
sc->tx.wc_fifo = 0;
|
|
sc->rx_small.wc_fifo = 0;
|
|
sc->rx_big.wc_fifo = 0;
|
|
}
|
|
|
|
|
|
/* stock receive rings */
|
|
for (i = 0; i <= sc->rx_small.mask; i++) {
|
|
map = sc->rx_small.info[i].map;
|
|
err = mxge_get_buf_small(sc, map, i);
|
|
if (err) {
|
|
device_printf(sc->dev, "alloced %d/%d smalls\n",
|
|
i, sc->rx_small.mask + 1);
|
|
goto abort;
|
|
}
|
|
}
|
|
for (i = 0; i <= sc->rx_big.mask; i++) {
|
|
map = sc->rx_big.info[i].map;
|
|
err = mxge_get_buf_big(sc, map, i);
|
|
if (err) {
|
|
device_printf(sc->dev, "alloced %d/%d bigs\n",
|
|
i, sc->rx_big.mask + 1);
|
|
goto abort;
|
|
}
|
|
}
|
|
|
|
/* Give the firmware the mtu and the big and small buffer
|
|
sizes. The firmware wants the big buf size to be a power
|
|
of two. Luckily, FreeBSD's clusters are powers of two */
|
|
cmd.data0 = sc->ifp->if_mtu + ETHER_HDR_LEN;
|
|
err = mxge_send_cmd(sc, MXGEFW_CMD_SET_MTU, &cmd);
|
|
cmd.data0 = MHLEN;
|
|
err |= mxge_send_cmd(sc, MXGEFW_CMD_SET_SMALL_BUFFER_SIZE,
|
|
&cmd);
|
|
cmd.data0 = sc->big_bytes;
|
|
err |= mxge_send_cmd(sc, MXGEFW_CMD_SET_BIG_BUFFER_SIZE, &cmd);
|
|
/* Now give him the pointer to the stats block */
|
|
cmd.data0 = MXGE_LOWPART_TO_U32(sc->fw_stats_dma.bus_addr);
|
|
cmd.data1 = MXGE_HIGHPART_TO_U32(sc->fw_stats_dma.bus_addr);
|
|
err = mxge_send_cmd(sc, MXGEFW_CMD_SET_STATS_DMA, &cmd);
|
|
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "failed to setup params\n");
|
|
goto abort;
|
|
}
|
|
|
|
/* Finally, start the firmware running */
|
|
err = mxge_send_cmd(sc, MXGEFW_CMD_ETHERNET_UP, &cmd);
|
|
if (err) {
|
|
device_printf(sc->dev, "Couldn't bring up link\n");
|
|
goto abort;
|
|
}
|
|
sc->ifp->if_drv_flags |= IFF_DRV_RUNNING;
|
|
sc->ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
|
|
return 0;
|
|
|
|
|
|
abort:
|
|
mxge_free_mbufs(sc);
|
|
abort_with_irq:
|
|
bus_teardown_intr(sc->dev, sc->irq_res, sc->ih);
|
|
abort_with_rings:
|
|
mxge_free_rings(sc);
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
mxge_close(mxge_softc_t *sc)
|
|
{
|
|
mxge_cmd_t cmd;
|
|
int err, old_down_cnt;
|
|
|
|
sc->ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
old_down_cnt = sc->down_cnt;
|
|
mb();
|
|
err = mxge_send_cmd(sc, MXGEFW_CMD_ETHERNET_DOWN, &cmd);
|
|
if (err) {
|
|
device_printf(sc->dev, "Couldn't bring down link\n");
|
|
}
|
|
if (old_down_cnt == sc->down_cnt) {
|
|
/* wait for down irq */
|
|
(void)tsleep(&sc->down_cnt, PWAIT, "down mxge", hz);
|
|
}
|
|
if (old_down_cnt == sc->down_cnt) {
|
|
device_printf(sc->dev, "never got down irq\n");
|
|
}
|
|
if (sc->ih != NULL)
|
|
bus_teardown_intr(sc->dev, sc->irq_res, sc->ih);
|
|
mxge_free_mbufs(sc);
|
|
mxge_free_rings(sc);
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int
|
|
mxge_media_change(struct ifnet *ifp)
|
|
{
|
|
return EINVAL;
|
|
}
|
|
|
|
static int
|
|
mxge_change_mtu(mxge_softc_t *sc, int mtu)
|
|
{
|
|
struct ifnet *ifp = sc->ifp;
|
|
int real_mtu, old_mtu;
|
|
int err = 0;
|
|
|
|
|
|
real_mtu = mtu + ETHER_HDR_LEN;
|
|
if ((real_mtu > MXGE_MAX_ETHER_MTU) ||
|
|
real_mtu < 60)
|
|
return EINVAL;
|
|
sx_xlock(&sc->driver_lock);
|
|
old_mtu = ifp->if_mtu;
|
|
ifp->if_mtu = mtu;
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
mxge_close(sc);
|
|
err = mxge_open(sc);
|
|
if (err != 0) {
|
|
ifp->if_mtu = old_mtu;
|
|
mxge_close(sc);
|
|
(void) mxge_open(sc);
|
|
}
|
|
}
|
|
sx_xunlock(&sc->driver_lock);
|
|
return err;
|
|
}
|
|
|
|
static void
|
|
mxge_media_status(struct ifnet *ifp, struct ifmediareq *ifmr)
|
|
{
|
|
mxge_softc_t *sc = ifp->if_softc;
|
|
|
|
|
|
if (sc == NULL)
|
|
return;
|
|
ifmr->ifm_status = IFM_AVALID;
|
|
ifmr->ifm_status |= sc->fw_stats->link_up ? IFM_ACTIVE : 0;
|
|
ifmr->ifm_active = IFM_AUTO | IFM_ETHER;
|
|
ifmr->ifm_active |= sc->fw_stats->link_up ? IFM_FDX : 0;
|
|
}
|
|
|
|
static int
|
|
mxge_ioctl(struct ifnet *ifp, u_long command, caddr_t data)
|
|
{
|
|
mxge_softc_t *sc = ifp->if_softc;
|
|
struct ifreq *ifr = (struct ifreq *)data;
|
|
int err, mask;
|
|
|
|
err = 0;
|
|
switch (command) {
|
|
case SIOCSIFADDR:
|
|
case SIOCGIFADDR:
|
|
err = ether_ioctl(ifp, command, data);
|
|
break;
|
|
|
|
case SIOCSIFMTU:
|
|
err = mxge_change_mtu(sc, ifr->ifr_mtu);
|
|
break;
|
|
|
|
case SIOCSIFFLAGS:
|
|
sx_xlock(&sc->driver_lock);
|
|
if (ifp->if_flags & IFF_UP) {
|
|
if (!(ifp->if_drv_flags & IFF_DRV_RUNNING))
|
|
err = mxge_open(sc);
|
|
} else {
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
|
|
mxge_close(sc);
|
|
}
|
|
sx_xunlock(&sc->driver_lock);
|
|
break;
|
|
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
err = 0;
|
|
break;
|
|
|
|
case SIOCSIFCAP:
|
|
sx_xlock(&sc->driver_lock);
|
|
mask = ifr->ifr_reqcap ^ ifp->if_capenable;
|
|
if (mask & IFCAP_TXCSUM) {
|
|
if (IFCAP_TXCSUM & ifp->if_capenable) {
|
|
ifp->if_capenable &= ~IFCAP_TXCSUM;
|
|
ifp->if_hwassist &= ~(CSUM_TCP | CSUM_UDP);
|
|
} else {
|
|
ifp->if_capenable |= IFCAP_TXCSUM;
|
|
ifp->if_hwassist |= (CSUM_TCP | CSUM_UDP);
|
|
}
|
|
} else if (mask & IFCAP_RXCSUM) {
|
|
if (IFCAP_RXCSUM & ifp->if_capenable) {
|
|
ifp->if_capenable &= ~IFCAP_RXCSUM;
|
|
sc->csum_flag = 0;
|
|
} else {
|
|
ifp->if_capenable |= IFCAP_RXCSUM;
|
|
sc->csum_flag = 1;
|
|
}
|
|
}
|
|
sx_xunlock(&sc->driver_lock);
|
|
break;
|
|
|
|
case SIOCGIFMEDIA:
|
|
err = ifmedia_ioctl(ifp, (struct ifreq *)data,
|
|
&sc->media, command);
|
|
break;
|
|
|
|
default:
|
|
err = ENOTTY;
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static void
|
|
mxge_fetch_tunables(mxge_softc_t *sc)
|
|
{
|
|
|
|
TUNABLE_INT_FETCH("hw.mxge.flow_control_enabled",
|
|
&mxge_flow_control);
|
|
TUNABLE_INT_FETCH("hw.mxge.intr_coal_delay",
|
|
&mxge_intr_coal_delay);
|
|
TUNABLE_INT_FETCH("hw.mxge.nvidia_ecrc_enable",
|
|
&mxge_nvidia_ecrc_enable);
|
|
TUNABLE_INT_FETCH("hw.mxge.deassert_wait",
|
|
&mxge_deassert_wait);
|
|
TUNABLE_INT_FETCH("hw.mxge.verbose",
|
|
&mxge_verbose);
|
|
|
|
if (bootverbose)
|
|
mxge_verbose = 1;
|
|
if (mxge_intr_coal_delay < 0 || mxge_intr_coal_delay > 10*1000)
|
|
mxge_intr_coal_delay = 30;
|
|
sc->pause = mxge_flow_control;
|
|
}
|
|
|
|
static int
|
|
mxge_attach(device_t dev)
|
|
{
|
|
mxge_softc_t *sc = device_get_softc(dev);
|
|
struct ifnet *ifp;
|
|
size_t bytes;
|
|
int rid, err;
|
|
uint16_t cmd;
|
|
|
|
sc->dev = dev;
|
|
mxge_fetch_tunables(sc);
|
|
|
|
err = bus_dma_tag_create(NULL, /* parent */
|
|
1, /* alignment */
|
|
4096, /* boundary */
|
|
BUS_SPACE_MAXADDR, /* low */
|
|
BUS_SPACE_MAXADDR, /* high */
|
|
NULL, NULL, /* filter */
|
|
MXGE_MAX_ETHER_MTU, /* maxsize */
|
|
MXGE_MAX_SEND_DESC, /* num segs */
|
|
4096, /* maxsegsize */
|
|
0, /* flags */
|
|
NULL, NULL, /* lock */
|
|
&sc->parent_dmat); /* tag */
|
|
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "Err %d allocating parent dmat\n",
|
|
err);
|
|
goto abort_with_nothing;
|
|
}
|
|
|
|
ifp = sc->ifp = if_alloc(IFT_ETHER);
|
|
if (ifp == NULL) {
|
|
device_printf(dev, "can not if_alloc()\n");
|
|
err = ENOSPC;
|
|
goto abort_with_parent_dmat;
|
|
}
|
|
mtx_init(&sc->cmd_lock, NULL,
|
|
MTX_NETWORK_LOCK, MTX_DEF);
|
|
mtx_init(&sc->tx_lock, device_get_nameunit(dev),
|
|
MTX_NETWORK_LOCK, MTX_DEF);
|
|
sx_init(&sc->driver_lock, device_get_nameunit(dev));
|
|
|
|
/* Enable DMA and Memory space access */
|
|
pci_enable_busmaster(dev);
|
|
cmd = pci_read_config(dev, PCIR_COMMAND, 2);
|
|
cmd |= PCIM_CMD_MEMEN;
|
|
pci_write_config(dev, PCIR_COMMAND, cmd, 2);
|
|
|
|
/* Map the board into the kernel */
|
|
rid = PCIR_BARS;
|
|
sc->mem_res = bus_alloc_resource(dev, SYS_RES_MEMORY, &rid, 0,
|
|
~0, 1, RF_ACTIVE);
|
|
if (sc->mem_res == NULL) {
|
|
device_printf(dev, "could not map memory\n");
|
|
err = ENXIO;
|
|
goto abort_with_lock;
|
|
}
|
|
sc->sram = rman_get_virtual(sc->mem_res);
|
|
sc->sram_size = 2*1024*1024 - (2*(48*1024)+(32*1024)) - 0x100;
|
|
if (sc->sram_size > rman_get_size(sc->mem_res)) {
|
|
device_printf(dev, "impossible memory region size %ld\n",
|
|
rman_get_size(sc->mem_res));
|
|
err = ENXIO;
|
|
goto abort_with_mem_res;
|
|
}
|
|
|
|
/* make NULL terminated copy of the EEPROM strings section of
|
|
lanai SRAM */
|
|
bzero(sc->eeprom_strings, MXGE_EEPROM_STRINGS_SIZE);
|
|
bus_space_read_region_1(rman_get_bustag(sc->mem_res),
|
|
rman_get_bushandle(sc->mem_res),
|
|
sc->sram_size - MXGE_EEPROM_STRINGS_SIZE,
|
|
sc->eeprom_strings,
|
|
MXGE_EEPROM_STRINGS_SIZE - 2);
|
|
err = mxge_parse_strings(sc);
|
|
if (err != 0)
|
|
goto abort_with_mem_res;
|
|
|
|
/* Enable write combining for efficient use of PCIe bus */
|
|
mxge_enable_wc(sc);
|
|
|
|
/* Allocate the out of band dma memory */
|
|
err = mxge_dma_alloc(sc, &sc->cmd_dma,
|
|
sizeof (mxge_cmd_t), 64);
|
|
if (err != 0)
|
|
goto abort_with_mem_res;
|
|
sc->cmd = (mcp_cmd_response_t *) sc->cmd_dma.addr;
|
|
err = mxge_dma_alloc(sc, &sc->zeropad_dma, 64, 64);
|
|
if (err != 0)
|
|
goto abort_with_cmd_dma;
|
|
|
|
err = mxge_dma_alloc(sc, &sc->fw_stats_dma,
|
|
sizeof (*sc->fw_stats), 64);
|
|
if (err != 0)
|
|
goto abort_with_zeropad_dma;
|
|
sc->fw_stats = (mcp_irq_data_t *)sc->fw_stats_dma.addr;
|
|
|
|
|
|
/* allocate interrupt queues */
|
|
bytes = mxge_max_intr_slots * sizeof (*sc->rx_done.entry);
|
|
err = mxge_dma_alloc(sc, &sc->rx_done.dma, bytes, 4096);
|
|
if (err != 0)
|
|
goto abort_with_fw_stats;
|
|
sc->rx_done.entry = sc->rx_done.dma.addr;
|
|
bzero(sc->rx_done.entry, bytes);
|
|
/* Add our ithread */
|
|
rid = 0;
|
|
sc->irq_res = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0,
|
|
1, RF_SHAREABLE | RF_ACTIVE);
|
|
if (sc->irq_res == NULL) {
|
|
device_printf(dev, "could not alloc interrupt\n");
|
|
goto abort_with_rx_done;
|
|
}
|
|
|
|
/* load the firmware */
|
|
mxge_select_firmware(sc);
|
|
|
|
err = mxge_load_firmware(sc);
|
|
if (err != 0)
|
|
goto abort_with_irq_res;
|
|
sc->intr_coal_delay = mxge_intr_coal_delay;
|
|
err = mxge_reset(sc);
|
|
if (err != 0)
|
|
goto abort_with_irq_res;
|
|
|
|
/* hook into the network stack */
|
|
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
|
|
ifp->if_baudrate = 100000000;
|
|
ifp->if_capabilities = IFCAP_RXCSUM | IFCAP_TXCSUM;
|
|
ifp->if_hwassist = CSUM_TCP | CSUM_UDP;
|
|
ifp->if_capenable = ifp->if_capabilities;
|
|
sc->csum_flag = 1;
|
|
ifp->if_init = mxge_init;
|
|
ifp->if_softc = sc;
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_ioctl = mxge_ioctl;
|
|
ifp->if_start = mxge_start;
|
|
ifp->if_watchdog = mxge_watchdog;
|
|
ether_ifattach(ifp, sc->mac_addr);
|
|
/* ether_ifattach sets mtu to 1500 */
|
|
ifp->if_mtu = MXGE_MAX_ETHER_MTU - ETHER_HDR_LEN;
|
|
|
|
/* Initialise the ifmedia structure */
|
|
ifmedia_init(&sc->media, 0, mxge_media_change,
|
|
mxge_media_status);
|
|
ifmedia_add(&sc->media, IFM_ETHER|IFM_AUTO, 0, NULL);
|
|
mxge_add_sysctls(sc);
|
|
return 0;
|
|
|
|
abort_with_irq_res:
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->irq_res);
|
|
abort_with_rx_done:
|
|
sc->rx_done.entry = NULL;
|
|
mxge_dma_free(&sc->rx_done.dma);
|
|
abort_with_fw_stats:
|
|
mxge_dma_free(&sc->fw_stats_dma);
|
|
abort_with_zeropad_dma:
|
|
mxge_dma_free(&sc->zeropad_dma);
|
|
abort_with_cmd_dma:
|
|
mxge_dma_free(&sc->cmd_dma);
|
|
abort_with_mem_res:
|
|
bus_release_resource(dev, SYS_RES_MEMORY, PCIR_BARS, sc->mem_res);
|
|
abort_with_lock:
|
|
pci_disable_busmaster(dev);
|
|
mtx_destroy(&sc->cmd_lock);
|
|
mtx_destroy(&sc->tx_lock);
|
|
sx_destroy(&sc->driver_lock);
|
|
if_free(ifp);
|
|
abort_with_parent_dmat:
|
|
bus_dma_tag_destroy(sc->parent_dmat);
|
|
|
|
abort_with_nothing:
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
mxge_detach(device_t dev)
|
|
{
|
|
mxge_softc_t *sc = device_get_softc(dev);
|
|
|
|
sx_xlock(&sc->driver_lock);
|
|
if (sc->ifp->if_drv_flags & IFF_DRV_RUNNING)
|
|
mxge_close(sc);
|
|
sx_xunlock(&sc->driver_lock);
|
|
ether_ifdetach(sc->ifp);
|
|
mxge_dummy_rdma(sc, 0);
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->irq_res);
|
|
sc->rx_done.entry = NULL;
|
|
mxge_dma_free(&sc->rx_done.dma);
|
|
mxge_dma_free(&sc->fw_stats_dma);
|
|
mxge_dma_free(&sc->zeropad_dma);
|
|
mxge_dma_free(&sc->cmd_dma);
|
|
bus_release_resource(dev, SYS_RES_MEMORY, PCIR_BARS, sc->mem_res);
|
|
pci_disable_busmaster(dev);
|
|
mtx_destroy(&sc->cmd_lock);
|
|
mtx_destroy(&sc->tx_lock);
|
|
sx_destroy(&sc->driver_lock);
|
|
if_free(sc->ifp);
|
|
bus_dma_tag_destroy(sc->parent_dmat);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
mxge_shutdown(device_t dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
This file uses Myri10GE driver indentation.
|
|
|
|
Local Variables:
|
|
c-file-style:"linux"
|
|
tab-width:8
|
|
End:
|
|
*/
|