7c30723e15
MFC after: 2 weeks
495 lines
11 KiB
Plaintext
495 lines
11 KiB
Plaintext
# SCSI mode page data base.
|
|
|
|
# Copyright (c) 1995 HD Associates
|
|
# Copyright (c) 2001 The FreeBSD Project
|
|
# (contact: dufault@hda.com)
|
|
# All rights reserved.
|
|
#
|
|
# Redistribution and use in source and binary forms, with or without
|
|
# modification, are permitted provided that the following conditions
|
|
# are met:
|
|
# 1. Redistributions of source code must retain the above copyright
|
|
# notice, this list of conditions and the following disclaimer.
|
|
# 2. Redistributions in binary form must reproduce the above copyright
|
|
# notice, this list of conditions and the following disclaimer in the
|
|
# documentation and/or other materials provided with the distribution.
|
|
# 3. The name of HD Associates
|
|
# may not be used to endorse or promote products derived from this software
|
|
# without specific prior written permission.
|
|
#
|
|
# THIS SOFTWARE IS PROVIDED BY HD ASSOCIATES ``AS IS'' AND
|
|
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
# ARE DISCLAIMED. IN NO EVENT SHALL HD ASSOCIATES BE LIABLE
|
|
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
# SUCH DAMAGE.
|
|
#
|
|
# $FreeBSD$
|
|
#
|
|
# The ordering is alphabetical by page name, as it appears in the SCSI spec.
|
|
|
|
# 'i' is a byte-sized integral types, followed by a field width of
|
|
# 1 through 4 (1 to 4 bytes).
|
|
#
|
|
# 'b' is a bit-sized integral type
|
|
# 't' is a bitfield type- followed by a bit field width
|
|
#
|
|
# 'c' values are character arrays
|
|
# 'z' values are null-padded strings
|
|
#
|
|
#
|
|
# '*' suppresses assignment (for 'seeking').
|
|
# Bitfields are MSB to LSB.
|
|
|
|
|
|
# ALL DEVICE TYPES
|
|
|
|
0x0a,0x03 "Command Duration Limit A";
|
|
|
|
0x0a,0x04 "Command Duration Limit B";
|
|
|
|
0x0a "Control" {
|
|
{TST} t3
|
|
{TMF_ONLY} t1
|
|
{DPICZ} t1
|
|
{D_SENSE} t1
|
|
{GLTSD} t1
|
|
{RLEC} t1
|
|
{Queue Algorithm Modifier} t4
|
|
{NUAR} t1
|
|
{QErr} t2
|
|
{DQue} t1
|
|
{EECA} t1
|
|
{RAC} t1
|
|
{UA_INTLCK_CTRL} t2
|
|
{SWP} t1
|
|
{RAENP} t1
|
|
{UAAENP} t1
|
|
{EAENP} t1
|
|
{ATO} t1
|
|
{TAS} t1
|
|
{ATMPE} t1
|
|
{RWWP} t1
|
|
{SBLP (Supported Block Lengths and Protection)} t1
|
|
{Autoload Mode} t3
|
|
{Ready AEN Holdoff Period} i2
|
|
{Busy Timeout Period} i2
|
|
{Extended Self-Test Completion Time} i2
|
|
}
|
|
|
|
0x0a,0x01 "Control Extension" {
|
|
{Reserved} *t4
|
|
{DLC} t1
|
|
{TCMOS} t1
|
|
{SCSIP} t1
|
|
{IALUAE} t1
|
|
{Reserved} *t4
|
|
{Initial Command Priority} t4
|
|
{Maximum Sense Data Length} i1
|
|
}
|
|
|
|
0x02 "Disconnect-Reconnect" {
|
|
{Buffer Full Ratio} i1
|
|
{Buffer Empty Ratio} i1
|
|
{Bus Inactivity Limit} i2
|
|
{Disconnect Time Limit} i2
|
|
{Connect Time Limit} i2
|
|
{Maximum Burst Size} i2
|
|
{Reserved} *t6
|
|
{DTDC} t2
|
|
{Reserved} *i1
|
|
{Reserved} *i1
|
|
{Reserved} *i1
|
|
}
|
|
|
|
0x15 "Extended";
|
|
|
|
0x16 "Extended Device-Type Specific";
|
|
|
|
0x09 "Peripheral Device" {
|
|
{Interface Identifier} i2
|
|
{Reserved} *i1
|
|
{Reserved} *i1
|
|
{Reserved} *i1
|
|
{Reserved} *i1
|
|
}
|
|
|
|
0x1a "Power Condition" {
|
|
{PM_BG_PRECEDENCE} t1
|
|
{Reserved} *t6
|
|
{STANDBY_Y} t1
|
|
{Reserved} *t4
|
|
{IDLE_C} t1
|
|
{IDLE_B} t1
|
|
{IDLE_A} t1
|
|
{STANDBY_Z} t1
|
|
{IDLE_A Condition Timer} i4
|
|
{STANDBY_Z Condition Timer} i4
|
|
{IDLE_B Condition Timer} i4
|
|
{IDLE_C Condition Timer} i4
|
|
{STANDBY_Y Condition Timer} i4
|
|
{Reserved} *i4
|
|
{Reserved} *i4
|
|
{Reserved} *i4
|
|
{Reserved} *i3
|
|
{CCF Idle} t2
|
|
{CCF Standby} t2
|
|
{CCF Stopped} t2
|
|
{Reserved} *t2
|
|
}
|
|
|
|
0x1a,0x01 "Power Consumption" {
|
|
{Reserved} *i2
|
|
{Reserved} *t6
|
|
{Active Level} t2
|
|
{Power Consumption Identifier} i1
|
|
{Reserved} *i4
|
|
{Reserved} *i4
|
|
}
|
|
|
|
0x18 "Protocol-Specific Logical Unit";
|
|
|
|
0x19 "Protocol-Specific Port";
|
|
|
|
# DIRECT ACCESS DEVICES
|
|
|
|
0x0a,0x02 "Application Tag";
|
|
|
|
0x1a,0xf1 "ATA Power Condition";
|
|
|
|
0x1c,0x01 "Background Control" {
|
|
{Reserved} *t5
|
|
{S_L_FULL} *t1
|
|
{LOWIR} *t1
|
|
{EN_BMS} *t1
|
|
{Reserved} *t7
|
|
{EN_PS} *t1
|
|
{Background Medium Scan Interval Time} i2
|
|
{Background Pre-Scan Time Limit} i2
|
|
{Minimum Idle Time Before Background Scan} i2
|
|
{Maximum Time To Suspend Background Scan} i2
|
|
{Reserved} *i2
|
|
}
|
|
|
|
0x0a,0x06 "Background Operation Control" {
|
|
{BO_MODE} t2
|
|
{Reserved} *t6
|
|
}
|
|
|
|
0x08 "Caching" {
|
|
{IC} t1
|
|
{ABPF} t1
|
|
{CAP} t1
|
|
{DISC} t1
|
|
{SIZE} t1
|
|
{WCE} t1
|
|
{MF} t1
|
|
{RCD} t1
|
|
{Demand Retention Priority} t4
|
|
{Write Retention Priority} t4
|
|
{Disable Pre-fetch Transfer Length} i2
|
|
{Minimum Pre-fetch} i2
|
|
{Maximum Pre-fetch} i2
|
|
{Maximum Pre-fetch Ceiling} i2
|
|
{FSW (Force Sequential Write)} t1
|
|
{LBCSS (Logical Block Cache Segment Size)} t1
|
|
{DRA (Disable Read-Ahead)} t1
|
|
{Vendor Specific} t2
|
|
{SYNC_PROG} t1
|
|
{NV_DIS} t1
|
|
{Number of Cache Segments} i1
|
|
{Cache Segment Size} i2
|
|
{Reserved} *t4
|
|
}
|
|
|
|
0x05 "Flexible Disk" {
|
|
{Transfer rate} i2
|
|
{Number of heads} i1
|
|
{Sectors per track} i1
|
|
{Data bytes per sector} i2
|
|
{Number of cylinders} i2
|
|
{Starting cylinder-write precompensation} i2
|
|
{Starting cylinder-reduced write current} i2
|
|
{Drive step rate} i2
|
|
{Drive step pulse width} i1
|
|
{Head settle delay} i2
|
|
{Motor on delay} i1
|
|
{Motor off delay} i1
|
|
{TRDY} t1
|
|
{SSN} t1
|
|
{MO} t1
|
|
{Reserved} *t5
|
|
{Reserved} *t4
|
|
{SPC} t4
|
|
{Write Compensation} i1
|
|
{Head load delay} i1
|
|
{Head unload delay} i1
|
|
{Pin 34} t4
|
|
{Pin 2} t4
|
|
{Pin 4} t4
|
|
{Pin 1} t4
|
|
{Medium rotation rate} i2
|
|
{Reserved} *i1
|
|
{Reserved} *i1
|
|
}
|
|
|
|
0x03 "Format Device" {
|
|
{Tracks per Zone} i2
|
|
{Alternate Sectors per Zone} i2
|
|
{Alternate Tracks per Zone} i2
|
|
{Alternate Tracks per Logical Unit} i2
|
|
{Sectors per Track} i2
|
|
{Data Bytes per Physical Sector} i2
|
|
{Interleave} i2
|
|
{Track Skew Factor} i2
|
|
{Cylinder Skew Factor} i2
|
|
{SSEC} t1
|
|
{HSEC} t1
|
|
{RMB} t1
|
|
{SURF} t1
|
|
{Reserved} *t4
|
|
}
|
|
|
|
0x0a,0x05 "I/O Advice Hints Grouping";
|
|
|
|
0x1c "Informational Exceptions Control" {
|
|
{PERF} t1
|
|
{Reserved} *t1
|
|
{EBF} t1
|
|
{EWasc} t1
|
|
{DExcpt} t1
|
|
{TEST} t1
|
|
{EBACKERR} t1
|
|
{LogErr} t1
|
|
{Reserved} *t4
|
|
{MRIE} t4
|
|
{Interval Timer} i4
|
|
{Report Count} i4
|
|
}
|
|
|
|
0x1c,0x02 "Logical Block Provisioning" {
|
|
{Reserved} *t7
|
|
{SITUA} t1
|
|
{Reserved} *i1
|
|
{Reserved} *i1
|
|
{Reserved} *i1
|
|
{Reserved} *i4
|
|
{Reserved} *i4
|
|
}
|
|
|
|
0x0b "Medium Types Supported" {
|
|
{Reserved} *i1
|
|
{Reserved} *i1
|
|
{Medium type one supported} i1
|
|
{Medium type two supported} i1
|
|
{Medium type three supported} i1
|
|
{Medium type four supported} i1
|
|
}
|
|
|
|
0x0c "Notch and Partition";
|
|
|
|
0x0a,0xf1 "PATA Control";
|
|
|
|
0x01 "Read-Write Error Recovery" {
|
|
{AWRE (Auto Write Reallocation Enbld)} t1
|
|
{ARRE (Auto Read Reallocation Enbld)} t1
|
|
{TB (Transfer Block)} t1
|
|
{RC (Read Continuous)} t1
|
|
{EER (Enable Early Recovery)} t1
|
|
{PER (Post Error)} t1
|
|
{DTE (Disable Transfer on Error)} t1
|
|
{DCR (Disable Correction)} t1
|
|
{Read Retry Count} i1
|
|
{Correction Span} i1
|
|
{Head Offset Count} i1
|
|
{Data Strobe Offset Count} i1
|
|
{LBPERE (LBP Error Reporting Enabled)} t1
|
|
{MWR (Misaligned Write Reporting)} t2
|
|
{Reserved} *t5
|
|
{Write Retry Count} i1
|
|
{Reserved} *i1
|
|
{Recovery Time Limit} i2
|
|
}
|
|
|
|
0x04 "Rigid Disk Drive Geometry" {
|
|
{Number of Cylinders} i3
|
|
{Number of Heads} i1
|
|
{Starting Cylinder-Write Precompensation} i3
|
|
{Starting Cylinder-Reduced Write Current} i3
|
|
{Drive Step Rate} i2
|
|
{Landing Zone Cylinder} i3
|
|
{Reserved} *t6
|
|
{RPL} t2
|
|
{Rotational Offset} i1
|
|
{Reserved} *i1
|
|
{Medium Rotation Rate} i2
|
|
{Reserved} *i1
|
|
{Reserved} *i1
|
|
}
|
|
|
|
0x07 "Verify Error Recovery" {
|
|
{Reserved} *t4
|
|
{EER} t1
|
|
{PER} t1
|
|
{DTE} t1
|
|
{DCR} t1
|
|
{Verify Retry Count} i1
|
|
{Verify Correction Span} i1
|
|
{Reserved} *i1
|
|
{Reserved} *i1
|
|
{Reserved} *i1
|
|
{Reserved} *i1
|
|
{Reserved} *i1
|
|
{Verify Recovery Time Limit} i2
|
|
}
|
|
|
|
0x0E "CD-ROM Audio Control Parameters" {
|
|
{Reserved} *t5
|
|
{Immed} t1
|
|
{SOTC} t1
|
|
{Reserved} *t1
|
|
{Reserved} *i2
|
|
{APRVal} t1
|
|
{Reserved} *t3
|
|
{Format of LBAs / sec.} t4
|
|
{Logical Blocks per Second of Audio Playback} i2
|
|
{Reserved} *t4
|
|
{Output Port 0 Channel Selection} t4
|
|
{Output Port 0 Volume} i1
|
|
{Reserved} *t4
|
|
{Output Port 1 Channel Selection} t4
|
|
{Output Port 1 Volume} i1
|
|
{Reserved} *t4
|
|
{Output Port 2 Channel Selection} t4
|
|
{Output Port 2 Volume} i1
|
|
{Reserved} *t4
|
|
{Output Port 3 Channel Selection} t4
|
|
{Output Port 3 Volume} i1
|
|
}
|
|
|
|
# SEQUENTIAL ACCESS DEVICES
|
|
0x10 "Device Configuration" {
|
|
{Reserved} *t1
|
|
{Change Active Partition} t1
|
|
{Change Active Format} t1
|
|
{Active Format} t5
|
|
{Active Partition} i1
|
|
{Write Buffer Full Ratio} i1
|
|
{Write Buffer Empty Ratio} i1
|
|
{Write Delay Time} i2
|
|
{Data Buffer Recovery} t1
|
|
{Block Identifiers Support} t1
|
|
{Report Setmarks} t1
|
|
{Automatic Velocity Control} t1
|
|
{Stop on Consecutive Filemarks} t2
|
|
{Recover Buffer Order} t1
|
|
{Report Early-Warning} t1
|
|
{Gap Size} i1
|
|
{EOD Defined} t3
|
|
{Enable EOD Generation} t1
|
|
{Synchronize at Early-Warning} t1
|
|
{Reserved} *t3
|
|
{Buffer Size at Early-Warning} i3
|
|
{Select Data Compression Algorithm} i1
|
|
{Reserved} *t5
|
|
{SCSI-3 Associated Write Protect} t1
|
|
{SCSI-3 Persistent Write Protect} t1
|
|
{SCSI-3 Permanent Write Protect} t1
|
|
}
|
|
|
|
0x0f "Data Compression" {
|
|
{Data Compression Enabled} t1
|
|
{Date Compression Capable} t1
|
|
{Reserved} *t6
|
|
{Data Decompression Capable} t1
|
|
{Data Decompression Report on Exception} t2
|
|
{Reserved} *t5
|
|
{Compression Algorithm} i4
|
|
{Decompression Algorithm} i4
|
|
{Reserved} *i4
|
|
}
|
|
|
|
# Removable devices
|
|
0x1b "Removable Block Access Capacities" {
|
|
{System Floppy Type Device} t1
|
|
{Supports Reporting Format Progress} t1
|
|
{Reserved} *t6
|
|
{Non CD Optical Device} t1
|
|
{Single or Multiple LUN Supported} t1
|
|
{Reserved} *t3
|
|
{Total Logical Units Supported} t3
|
|
{Reserved} *i8
|
|
}
|
|
|
|
# CD-ROM (and CD-R[W]) devices
|
|
0x2a "CD capabilities and mechanical status" {
|
|
{Reserved} *t4
|
|
{Method 2} t1
|
|
{CD-RW Read} t1
|
|
{CD-R Read} t1
|
|
{Reserved} *t4
|
|
{Test Write} t1
|
|
{CD-RW Write} t1
|
|
{CD-R Write} t1
|
|
{Reserved} *t1
|
|
{Multi Session} t1
|
|
{Mode 2 Form 2} t1
|
|
{Mode 2 Form 1} t1
|
|
{Digital Port (2)} t1
|
|
{Digital Port (1)} t1
|
|
{Composite} t1
|
|
{Audio Play} t1
|
|
{Read Bar Code} t1
|
|
{UPC} t1
|
|
{ISRC} t1
|
|
{C2 Pointers are supported} t1
|
|
{R-W De-interleaved & corrected} t1
|
|
{R-W Supported} t1
|
|
{CD-DA Stream is Accurate} t1
|
|
{CD-DA Commands Supported} t1
|
|
{Loading Mechanism Type} t3
|
|
{Reserved} *t1
|
|
{Eject} t1
|
|
{Prevent Jumper} t1
|
|
{Lock State} t1
|
|
{Lock} t1
|
|
{Reserved} *t4
|
|
{S/W Slot Selection} t1
|
|
{Changer Supports Disc Present reporting} t1
|
|
{Separate Channel Mute Supported} t1
|
|
{Separate volume levels per channel} t1
|
|
{Maximum Read Speed Supported (kBps)} i2
|
|
{Number of Volume Leves Supported} i2
|
|
{Buffer Size supported by Drive (KB)} i2
|
|
{Current Read Speed Selected (kBps)} i2
|
|
{Reserved} *i1
|
|
{Reserved} *t2
|
|
{Length} t2
|
|
{LSBF} t1
|
|
{RCK} t1
|
|
{BCK} t1
|
|
{Reserved} *t1
|
|
{Maximum Write Speed Supported (kBps)} i2
|
|
{Current Write Speed Supported (kBps)} i2
|
|
};
|
|
|
|
0x1d "Timeout and Protect" {
|
|
{Reserved} *i2
|
|
{Reserved} *t4
|
|
{G3Enable} t1
|
|
{TMOE} t1
|
|
{DISP} t1
|
|
{SWPP} t1
|
|
{Reserved} *i1
|
|
{Group 1 Minimum Timeout} i2
|
|
{Group 2 Minimum Timeout} i2
|
|
{Group 3 Timeout} i2
|
|
};
|
|
|
|
0x00 "Vendor-Specific";
|