d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4410530efb
freebsd-skq/sys/dev/usb/uscanner.c
julian 5596676e6c KSE Milestone 2 
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00

669 lines
17 KiB
C
Raw Blame History

/* $NetBSD: uscanner.c,v 1.9 2000/11/14 13:57:16 augustss Exp $ */
/* $FreeBSD$ */
/*
* Copyright (c) 2000 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Lennart Augustsson (lennart@augustsson.net) at
* Carlstedt Research & Technology
* and Nick Hibma (n_hibma@qubesoft.com).
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#if defined(__NetBSD__) || defined(__OpenBSD__)
#include <sys/device.h>
#elif defined(__FreeBSD__)
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/fcntl.h>
#include <sys/filio.h>
#endif
#include <sys/tty.h>
#include <sys/file.h>
#if __FreeBSD_version >= 500014
#include <sys/selinfo.h>
#else
#include <sys/select.h>
#endif
#include <sys/proc.h>
#include <sys/vnode.h>
#include <sys/poll.h>
#include <sys/conf.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdi_util.h>
#include <dev/usb/usbdevs.h>
#ifdef USCANNER_DEBUG
#define DPRINTF(x) if (uscannerdebug) logprintf x
#define DPRINTFN(n,x) if (uscannerdebug>(n)) logprintf x
int uscannerdebug = 0;
#else
#define DPRINTF(x)
#define DPRINTFN(n,x)
#endif
/* Table of scanners that may work with this driver. */
static const struct scanner_id {
uint16_t vendor;
uint16_t product;
} scanner_ids [] = {
/* Acer Peripherals */
{ USB_VENDOR_ACERP, USB_PRODUCT_ACERP_ACERSCAN_320U },
{ USB_VENDOR_ACERP, USB_PRODUCT_ACERP_ACERSCAN_640U },
{ USB_VENDOR_ACERP, USB_PRODUCT_ACERP_ACERSCAN_620U },
{ USB_VENDOR_ACERP, USB_PRODUCT_ACERP_ACERSCAN_C310U },
/* AGFA */
{ USB_VENDOR_AGFA, USB_PRODUCT_AGFA_SNAPSCAN1212U },
{ USB_VENDOR_AGFA, USB_PRODUCT_AGFA_SNAPSCAN1212U2 },
{ USB_VENDOR_AGFA, USB_PRODUCT_AGFA_SNAPSCANTOUCH },
/* Kye */
{ USB_VENDOR_KYE, USB_PRODUCT_KYE_VIVIDPRO },
/* HP */
{ USB_VENDOR_HP, USB_PRODUCT_HP_3300C },
{ USB_VENDOR_HP, USB_PRODUCT_HP_4100C },
{ USB_VENDOR_HP, USB_PRODUCT_HP_4200C },
{ USB_VENDOR_HP, USB_PRODUCT_HP_4300C },
{ USB_VENDOR_HP, USB_PRODUCT_HP_S20 },
{ USB_VENDOR_HP, USB_PRODUCT_HP_5200C },
{ USB_VENDOR_HP, USB_PRODUCT_HP_5300C },
{ USB_VENDOR_HP, USB_PRODUCT_HP_6200C },
{ USB_VENDOR_HP, USB_PRODUCT_HP_6300C },
/* Avision */
{ USB_VENDOR_AVISION, USB_PRODUCT_AVISION_1200U },
/* Microtek */
{ USB_VENDOR_MICROTEK, USB_PRODUCT_MICROTEK_X6U },
{ USB_VENDOR_MICROTEK, USB_PRODUCT_MICROTEK_336CX },
{ USB_VENDOR_MICROTEK, USB_PRODUCT_MICROTEK_336CX2 },
{ USB_VENDOR_MICROTEK, USB_PRODUCT_MICROTEK_C6 },
{ USB_VENDOR_MICROTEK, USB_PRODUCT_MICROTEK_V6USL },
{ USB_VENDOR_MICROTEK, USB_PRODUCT_MICROTEK_V6USL2 },
{ USB_VENDOR_MICROTEK, USB_PRODUCT_MICROTEK_V6UL },
/* Mustek */
{ USB_VENDOR_MUSTEK, USB_PRODUCT_MUSTEK_1200CU },
{ USB_VENDOR_MUSTEK, USB_PRODUCT_MUSTEK_600CU },
{ USB_VENDOR_MUSTEK, USB_PRODUCT_MUSTEK_1200USB },
{ USB_VENDOR_MUSTEK, USB_PRODUCT_MUSTEK_1200UB },
/* National */
{ USB_VENDOR_NATIONAL, USB_PRODUCT_NATIONAL_BEARPAW1200 },
/* Primax */
{ USB_VENDOR_PRIMAX, USB_PRODUCT_PRIMAX_G2X300 },
{ USB_VENDOR_PRIMAX, USB_PRODUCT_PRIMAX_G2E300 },
{ USB_VENDOR_PRIMAX, USB_PRODUCT_PRIMAX_G2300 },
{ USB_VENDOR_PRIMAX, USB_PRODUCT_PRIMAX_G2E3002 },
{ USB_VENDOR_PRIMAX, USB_PRODUCT_PRIMAX_9600 },
{ USB_VENDOR_PRIMAX, USB_PRODUCT_PRIMAX_600U },
{ USB_VENDOR_PRIMAX, USB_PRODUCT_PRIMAX_19200 },
{ USB_VENDOR_PRIMAX, USB_PRODUCT_PRIMAX_1200U },
{ USB_VENDOR_PRIMAX, USB_PRODUCT_PRIMAX_G600 },
{ USB_VENDOR_PRIMAX, USB_PRODUCT_PRIMAX_636I },
{ USB_VENDOR_PRIMAX, USB_PRODUCT_PRIMAX_G2600 },
{ USB_VENDOR_PRIMAX, USB_PRODUCT_PRIMAX_G2E600 },
/* Epson */
{ USB_VENDOR_EPSON, USB_PRODUCT_EPSON_636 },
{ USB_VENDOR_EPSON, USB_PRODUCT_EPSON_610 },
{ USB_VENDOR_EPSON, USB_PRODUCT_EPSON_1200 },
{ USB_VENDOR_EPSON, USB_PRODUCT_EPSON_1240 },
{ USB_VENDOR_EPSON, USB_PRODUCT_EPSON_1600 },
{ USB_VENDOR_EPSON, USB_PRODUCT_EPSON_1640 },
/* UMAX */
{ USB_VENDOR_UMAX, USB_PRODUCT_UMAX_ASTRA1220U },
{ USB_VENDOR_UMAX, USB_PRODUCT_UMAX_ASTRA1236U },
{ USB_VENDOR_UMAX, USB_PRODUCT_UMAX_ASTRA2000U },
{ USB_VENDOR_UMAX, USB_PRODUCT_UMAX_ASTRA2200U },
/* Visioneer */
{ USB_VENDOR_VISIONEER, USB_PRODUCT_VISIONEER_5300 },
{ USB_VENDOR_VISIONEER, USB_PRODUCT_VISIONEER_7600 },
{ USB_VENDOR_VISIONEER, USB_PRODUCT_VISIONEER_6100 },
{ USB_VENDOR_VISIONEER, USB_PRODUCT_VISIONEER_6200 },
{ USB_VENDOR_VISIONEER, USB_PRODUCT_VISIONEER_8100 },
{ USB_VENDOR_VISIONEER, USB_PRODUCT_VISIONEER_8600 },
{ 0, 0 }
};
#define USCANNER_BUFFERSIZE 1024
struct uscanner_softc {
USBBASEDEVICE sc_dev; /* base device */
usbd_device_handle sc_udev;
usbd_interface_handle sc_iface;
usbd_pipe_handle sc_bulkin_pipe;
int sc_bulkin;
usbd_xfer_handle sc_bulkin_xfer;
void *sc_bulkin_buffer;
int sc_bulkin_bufferlen;
int sc_bulkin_datalen;
usbd_pipe_handle sc_bulkout_pipe;
int sc_bulkout;
usbd_xfer_handle sc_bulkout_xfer;
void *sc_bulkout_buffer;
int sc_bulkout_bufferlen;
int sc_bulkout_datalen;
u_char sc_state;
#define USCANNER_OPEN 0x01 /* opened */
int sc_refcnt;
u_char sc_dying;
};
#if defined(__NetBSD__) || defined(__OpenBSD__)
cdev_decl(uscanner);
#elif defined(__FreeBSD__)
d_open_t uscanneropen;
d_close_t uscannerclose;
d_read_t uscannerread;
d_write_t uscannerwrite;
d_poll_t uscannerpoll;
#define USCANNER_CDEV_MAJOR 156
Static struct cdevsw uscanner_cdevsw = {
/* open */ uscanneropen,
/* close */ uscannerclose,
/* read */ uscannerread,
/* write */ uscannerwrite,
/* ioctl */ noioctl,
/* poll */ uscannerpoll,
/* mmap */ nommap,
/* strategy */ nostrategy,
/* name */ "uscanner",
/* maj */ USCANNER_CDEV_MAJOR,
/* dump */ nodump,
/* psize */ nopsize,
/* flags */ 0,
};
#endif
Static int uscanner_do_read(struct uscanner_softc *, struct uio *, int);
Static int uscanner_do_write(struct uscanner_softc *, struct uio *, int);
Static void uscanner_do_close(struct uscanner_softc *);
#define USCANNERUNIT(n) (minor(n))
USB_DECLARE_DRIVER(uscanner);
USB_MATCH(uscanner)
{
USB_MATCH_START(uscanner, uaa);
int i;
if (uaa->iface != NULL)
return UMATCH_NONE;
for (i = 0; scanner_ids[i].vendor != 0; i++) {
if (scanner_ids[i].vendor == uaa->vendor &&
scanner_ids[i].product == uaa->product) {
return (UMATCH_VENDOR_PRODUCT);
}
}
return (UMATCH_NONE);
}
USB_ATTACH(uscanner)
{
USB_ATTACH_START(uscanner, sc, uaa);
usb_interface_descriptor_t *id = 0;
usb_endpoint_descriptor_t *ed, *ed_bulkin = NULL, *ed_bulkout = NULL;
char devinfo[1024];
int i;
usbd_status err;
usbd_devinfo(uaa->device, 0, devinfo);
USB_ATTACH_SETUP;
printf("%s: %s\n", USBDEVNAME(sc->sc_dev), devinfo);
sc->sc_udev = uaa->device;
err = usbd_set_config_no(uaa->device, 1, 1); /* XXX */
if (err) {
printf("%s: setting config no failed\n",
USBDEVNAME(sc->sc_dev));
USB_ATTACH_ERROR_RETURN;
}
/* XXX We only check the first interface */
err = usbd_device2interface_handle(sc->sc_udev, 0, &sc->sc_iface);
if (!err && sc->sc_iface)
id = usbd_get_interface_descriptor(sc->sc_iface);
if (err || id == 0) {
printf("%s: could not get interface descriptor, err=%d,id=%p\n",
USBDEVNAME(sc->sc_dev), err, id);
USB_ATTACH_ERROR_RETURN;
}
/* Find the two first bulk endpoints */
for (i = 0 ; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i);
if (ed == 0) {
printf("%s: could not read endpoint descriptor\n",
USBDEVNAME(sc->sc_dev));
USB_ATTACH_ERROR_RETURN;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN
&& (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) {
ed_bulkin = ed;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT
&& (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) {
ed_bulkout = ed;
}
if (ed_bulkin && ed_bulkout) /* found all we need */
break;
}
/* Verify that we goething sensible */
if (ed_bulkin == NULL || ed_bulkout == NULL) {
printf("%s: bulk-in and/or bulk-out endpoint not found\n",
USBDEVNAME(sc->sc_dev));
USB_ATTACH_ERROR_RETURN;
}
sc->sc_bulkin = ed_bulkin->bEndpointAddress;
sc->sc_bulkout = ed_bulkout->bEndpointAddress;
#ifdef __FreeBSD__
/* the main device, ctrl endpoint */
make_dev(&uscanner_cdevsw, USBDEVUNIT(sc->sc_dev),
UID_ROOT, GID_OPERATOR, 0644, "%s", USBDEVNAME(sc->sc_dev));
#endif
USB_ATTACH_SUCCESS_RETURN;
}
int
uscanneropen(dev, flag, mode, td)
dev_t dev;
int flag;
int mode;
struct thread *td;
{
struct uscanner_softc *sc;
int unit = USCANNERUNIT(dev);
usbd_status err;
USB_GET_SC_OPEN(uscanner, unit, sc);
DPRINTFN(5, ("uscanneropen: flag=%d, mode=%d, unit=%d\n",
flag, mode, unit));
if (sc->sc_dying)
return (ENXIO);
if (sc->sc_state & USCANNER_OPEN)
return (EBUSY);
sc->sc_state |= USCANNER_OPEN;
sc->sc_bulkin_buffer = malloc(USCANNER_BUFFERSIZE, M_USBDEV, M_WAITOK);
sc->sc_bulkout_buffer = malloc(USCANNER_BUFFERSIZE, M_USBDEV, M_WAITOK);
/* No need to check buffers for NULL since we have WAITOK */
sc->sc_bulkin_bufferlen = USCANNER_BUFFERSIZE;
sc->sc_bulkout_bufferlen = USCANNER_BUFFERSIZE;
/* We have decided on which endpoints to use, now open the pipes */
err = usbd_open_pipe(sc->sc_iface, sc->sc_bulkin,
USBD_EXCLUSIVE_USE, &sc->sc_bulkin_pipe);
if (err) {
printf("%s: cannot open bulk-in pipe (addr %d)\n",
USBDEVNAME(sc->sc_dev), sc->sc_bulkin);
uscanner_do_close(sc);
return (EIO);
}
err = usbd_open_pipe(sc->sc_iface, sc->sc_bulkout,
USBD_EXCLUSIVE_USE, &sc->sc_bulkout_pipe);
if (err) {
printf("%s: cannot open bulk-out pipe (addr %d)\n",
USBDEVNAME(sc->sc_dev), sc->sc_bulkout);
uscanner_do_close(sc);
return (EIO);
}
sc->sc_bulkin_xfer = usbd_alloc_xfer(sc->sc_udev);
if (sc->sc_bulkin_xfer == NULL) {
uscanner_do_close(sc);
return (ENOMEM);
}
sc->sc_bulkout_xfer = usbd_alloc_xfer(sc->sc_udev);
if (sc->sc_bulkout_xfer == NULL) {
uscanner_do_close(sc);
return (ENOMEM);
}
return (0); /* success */
}
int
uscannerclose(dev, flag, mode, td)
dev_t dev;
int flag;
int mode;
struct thread *td;
{
struct uscanner_softc *sc;
USB_GET_SC(uscanner, USCANNERUNIT(dev), sc);
DPRINTFN(5, ("uscannerclose: flag=%d, mode=%d, unit=%d\n",
flag, mode, USCANNERUNIT(dev)));
#ifdef DIAGNOSTIC
if (!(sc->sc_state & USCANNER_OPEN)) {
printf("uscannerclose: not open\n");
return (EINVAL);
}
#endif
uscanner_do_close(sc);
return (0);
}
void
uscanner_do_close(struct uscanner_softc *sc)
{
if (sc->sc_bulkin_xfer) {
usbd_free_xfer(sc->sc_bulkin_xfer);
sc->sc_bulkin_xfer = NULL;
}
if (sc->sc_bulkout_xfer) {
usbd_free_xfer(sc->sc_bulkout_xfer);
sc->sc_bulkout_xfer = NULL;
}
if (sc->sc_bulkin_pipe) {
usbd_abort_pipe(sc->sc_bulkin_pipe);
usbd_close_pipe(sc->sc_bulkin_pipe);
sc->sc_bulkin_pipe = NULL;
}
if (sc->sc_bulkout_pipe) {
usbd_abort_pipe(sc->sc_bulkout_pipe);
usbd_close_pipe(sc->sc_bulkout_pipe);
sc->sc_bulkout_pipe = NULL;
}
if (sc->sc_bulkin_buffer) {
free(sc->sc_bulkin_buffer, M_USBDEV);
sc->sc_bulkin_buffer = NULL;
}
if (sc->sc_bulkout_buffer) {
free(sc->sc_bulkout_buffer, M_USBDEV);
sc->sc_bulkout_buffer = NULL;
}
sc->sc_state &= ~USCANNER_OPEN;
}
Static int
uscanner_do_read(sc, uio, flag)
struct uscanner_softc *sc;
struct uio *uio;
int flag;
{
u_int32_t n, tn;
usbd_status err;
int error = 0;
DPRINTFN(5, ("%s: uscannerread\n", USBDEVNAME(sc->sc_dev)));
if (sc->sc_dying)
return (EIO);
while ((n = min(sc->sc_bulkin_bufferlen, uio->uio_resid)) != 0) {
DPRINTFN(1, ("uscannerread: start transfer %d bytes\n",n));
tn = n;
err = usbd_bulk_transfer(
sc->sc_bulkin_xfer, sc->sc_bulkin_pipe,
USBD_SHORT_XFER_OK, USBD_NO_TIMEOUT,
sc->sc_bulkin_buffer, &tn,
"uscannerrb");
if (err) {
if (err == USBD_INTERRUPTED)
error = EINTR;
else if (err == USBD_TIMEOUT)
error = ETIMEDOUT;
else
error = EIO;
break;
}
DPRINTFN(1, ("uscannerread: got %d bytes\n", tn));
error = uiomove(sc->sc_bulkin_buffer, tn, uio);
if (error || tn < n)
break;
}
return (error);
}
int
uscannerread(dev, uio, flag)
dev_t dev;
struct uio *uio;
int flag;
{
struct uscanner_softc *sc;
int error;
USB_GET_SC(uscanner, USCANNERUNIT(dev), sc);
sc->sc_refcnt++;
error = uscanner_do_read(sc, uio, flag);
if (--sc->sc_refcnt < 0)
usb_detach_wakeup(USBDEV(sc->sc_dev));
return (error);
}
Static int
uscanner_do_write(sc, uio, flag)
struct uscanner_softc *sc;
struct uio *uio;
int flag;
{
u_int32_t n;
int error = 0;
usbd_status err;
DPRINTFN(5, ("%s: uscanner_do_write\n", USBDEVNAME(sc->sc_dev)));
if (sc->sc_dying)
return (EIO);
while ((n = min(sc->sc_bulkout_bufferlen, uio->uio_resid)) != 0) {
error = uiomove(sc->sc_bulkout_buffer, n, uio);
if (error)
break;
DPRINTFN(1, ("uscanner_do_write: transfer %d bytes\n", n));
err = usbd_bulk_transfer(
sc->sc_bulkout_xfer, sc->sc_bulkout_pipe,
0, USBD_NO_TIMEOUT,
sc->sc_bulkout_buffer, &n,
"uscannerwb");
if (err) {
if (err == USBD_INTERRUPTED)
error = EINTR;
else
error = EIO;
break;
}
}
return (error);
}
int
uscannerwrite(dev, uio, flag)
dev_t dev;
struct uio *uio;
int flag;
{
struct uscanner_softc *sc;
int error;
USB_GET_SC(uscanner, USCANNERUNIT(dev), sc);
sc->sc_refcnt++;
error = uscanner_do_write(sc, uio, flag);
if (--sc->sc_refcnt < 0)
usb_detach_wakeup(USBDEV(sc->sc_dev));
return (error);
}
#if defined(__NetBSD__) || defined(__OpenBSD__)
int
uscanner_activate(self, act)
device_ptr_t self;
enum devact act;
{
struct uscanner_softc *sc = (struct uscanner_softc *)self;
switch (act) {
case DVACT_ACTIVATE:
return (EOPNOTSUPP);
break;
case DVACT_DEACTIVATE:
sc->sc_dying = 1;
break;
}
return (0);
}
#endif
USB_DETACH(uscanner)
{
USB_DETACH_START(uscanner, sc);
int s;
#if defined(__NetBSD__) || defined(__OpenBSD__)
int maj, mn;
#elif defined(__FreeBSD__)
dev_t dev;
struct vnode *vp;
#endif
#if defined(__NetBSD__) || defined(__OpenBSD__)
DPRINTF(("uscanner_detach: sc=%p flags=%d\n", sc, flags));
#elif defined(__FreeBSD__)
DPRINTF(("uscanner_detach: sc=%p\n", sc));
#endif
sc->sc_dying = 1;
/* Abort all pipes. Causes processes waiting for transfer to wake. */
if (sc->sc_bulkin_pipe)
usbd_abort_pipe(sc->sc_bulkin_pipe);
if (sc->sc_bulkout_pipe)
usbd_abort_pipe(sc->sc_bulkout_pipe);
s = splusb();
if (--sc->sc_refcnt >= 0) {
/* Wait for processes to go away. */
usb_detach_wait(USBDEV(sc->sc_dev));
}
splx(s);
#if defined(__NetBSD__) || defined(__OpenBSD__)
/* locate the major number */
for (maj = 0; maj < nchrdev; maj++)
if (cdevsw[maj].d_open == uscanneropen)
break;
/* Nuke the vnodes for any open instances (calls close). */
mn = self->dv_unit * USB_MAX_ENDPOINTS;
vdevgone(maj, mn, mn + USB_MAX_ENDPOINTS - 1, VCHR);
#elif defined(__FreeBSD__)
/* destroy the device for the control endpoint */
dev = makedev(USCANNER_CDEV_MAJOR, USBDEVUNIT(sc->sc_dev));
vp = SLIST_FIRST(&dev->si_hlist);
if (vp)
VOP_REVOKE(vp, REVOKEALL);
destroy_dev(dev);
#endif
return (0);
}
int
uscannerpoll(dev, events, td)
dev_t dev;
int events;
struct thread *td;
{
struct uscanner_softc *sc;
int revents = 0;
USB_GET_SC(uscanner, USCANNERUNIT(dev), sc);
if (sc->sc_dying)
return (EIO);
/*
* We have no easy way of determining if a read will
* yield any data or a write will happen.
* Pretend they will.
*/
revents |= events &
(POLLIN | POLLRDNORM | POLLOUT | POLLWRNORM);
return (revents);
}
#if defined(__FreeBSD__)
DRIVER_MODULE(uscanner, uhub, uscanner_driver, uscanner_devclass, usbd_driver_load, 0);
#endif
Reference in New Issue View Git Blame Copy Permalink