freebsd-skq/sys/cam/scsi/scsi_low.h
Robert Watson 3de213cc00 Add a new 'why' argument to kdb_enter(), and a set of constants to use
for that argument.  This will allow DDB to detect the broad category of
reason why the debugger has been entered, which it can use for the
purposes of deciding which DDB script to run.

Assign approximate why values to all current consumers of the
kdb_enter() interface.
2007-12-25 17:52:02 +00:00

888 lines
24 KiB
C

/* $FreeBSD$ */
/* $NecBSD: scsi_low.h,v 1.24.10.5 2001/06/26 07:31:46 honda Exp $ */
/* $NetBSD$ */
#define SCSI_LOW_DIAGNOSTIC
#define SCSI_LOW_ALT_QTAG_ALLOCATE
/*-
* [NetBSD for NEC PC-98 series]
* Copyright (c) 1995, 1996, 1997, 1998, 1999, 2000, 2001
* NetBSD/pc98 porting staff. All rights reserved.
* Copyright (c) 1995, 1996, 1997, 1998, 1999, 2000, 2001
* Naofumi HONDA. All rights reserved.
*
* [Ported for FreeBSD CAM]
* Copyright (c) 2000, 2001
* MITSUNAGA Noriaki, NOKUBI Hirotaka and TAKAHASHI Yoshihiro.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _SCSI_LOW_H_
#define _SCSI_LOW_H_
/*================================================
* Scsi low OSDEP
* (All os depend structures should be here!)
================================================*/
/******** interface ******************************/
#ifdef __NetBSD__
#define SCSI_LOW_INTERFACE_XS
#endif /* __NetBSD__ */
#ifdef __FreeBSD__
#define SCSI_LOW_INTERFACE_CAM
#define CAM
#endif /* __FreeBSD__ */
/******** includes *******************************/
#ifdef __NetBSD__
#include <i386/Cbus/dev/scsi_dvcfg.h>
#include <dev/isa/ccbque.h>
#endif /* __NetBSD__ */
#ifdef __FreeBSD__
#include <sys/device_port.h>
#include <sys/kdb.h>
#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/cam_sim.h>
#include <cam/cam_xpt_sim.h>
#include <cam/cam_debug.h>
#include <cam/scsi/scsi_dvcfg.h>
#include <i386/isa/ccbque.h>
#endif /* __FreeBSD__ */
/******** functions macro ************************/
#ifdef __NetBSD__
#define SCSI_LOW_DEBUGGER(dev) Debugger()
#define SCSI_LOW_DELAY(mu) delay((mu))
#define SCSI_LOW_SPLSCSI splbio
#define SCSI_LOW_BZERO(pt, size) memset((pt), 0, (size))
#endif /* __NetBSD__ */
#ifdef __FreeBSD__
#undef MSG_IDENTIFY
#define SCSI_LOW_DEBUGGER(dev) kdb_enter(KDB_WHY_CAM, dev)
#define SCSI_LOW_DELAY(mu) DELAY((mu))
#define SCSI_LOW_SPLSCSI splcam
#define SCSI_LOW_BZERO(pt, size) bzero((pt), (size))
#endif /* __FreeBSD__ */
/******** os depend interface structures **********/
#ifdef __NetBSD__
typedef struct scsipi_sense_data scsi_low_osdep_sense_data_t;
struct scsi_low_osdep_interface {
struct device si_dev;
struct scsipi_link *si_splp;
};
struct scsi_low_osdep_targ_interface {
};
struct scsi_low_osdep_lun_interface {
u_int sloi_quirks;
};
#endif /* __NetBSD__ */
#ifdef __FreeBSD__
typedef struct scsi_sense_data scsi_low_osdep_sense_data_t;
struct scsi_low_osdep_interface {
DEVPORT_DEVICE si_dev;
struct cam_sim *sim;
struct cam_path *path;
int si_poll_count;
struct callout_handle engage_ch;
struct callout_handle timeout_ch;
#ifdef SCSI_LOW_POWFUNC
struct callout_handle recover_ch;
#endif
};
struct scsi_low_osdep_targ_interface {
};
struct scsi_low_osdep_lun_interface {
};
#endif /* __FreeBSD__ */
/******** os depend interface functions *************/
struct slccb;
struct scsi_low_softc;
#define SCSI_LOW_TIMEOUT_STOP 0
#define SCSI_LOW_TIMEOUT_START 1
#define SCSI_LOW_TIMEOUT_CH_IO 0
#define SCSI_LOW_TIMEOUT_CH_ENGAGE 1
#define SCSI_LOW_TIMEOUT_CH_RECOVER 2
struct scsi_low_osdep_funcs {
int (*scsi_low_osdep_attach) \
(struct scsi_low_softc *);
int (*scsi_low_osdep_world_start) \
(struct scsi_low_softc *);
int (*scsi_low_osdep_dettach) \
(struct scsi_low_softc *);
int (*scsi_low_osdep_ccb_setup) \
(struct scsi_low_softc *, struct slccb *);
int (*scsi_low_osdep_done) \
(struct scsi_low_softc *, struct slccb *);
void (*scsi_low_osdep_timeout) \
(struct scsi_low_softc *, int, int);
};
/*================================================
* Generic Scsi Low header file
* (All os depend structures should be above!)
================================================*/
/*************************************************
* Scsi low definitions
*************************************************/
#define SCSI_LOW_SYNC DVF_SCSI_SYNC
#define SCSI_LOW_DISC DVF_SCSI_DISC
#define SCSI_LOW_WAIT DVF_SCSI_WAIT
#define SCSI_LOW_LINK DVF_SCSI_LINK
#define SCSI_LOW_QTAG DVF_SCSI_QTAG
#define SCSI_LOW_NOPARITY DVF_SCSI_NOPARITY
#define SCSI_LOW_SAVESP DVF_SCSI_SAVESP
#define SCSI_LOW_DEFCFG DVF_SCSI_DEFCFG
#define SCSI_LOW_BITS DVF_SCSI_BITS
#define SCSI_LOW_PERIOD(n) DVF_SCSI_PERIOD(n)
#define SCSI_LOW_OFFSET(n) DVF_SCSI_OFFSET(n)
/* host scsi id and targets macro */
#ifndef SCSI_LOW_NTARGETS
#define SCSI_LOW_NTARGETS 8
#endif /* SCSI_LOW_NTARGETS */
#define SCSI_LOW_NCCB 128
#define SCSI_LOW_MAX_RETRY 3
#define SCSI_LOW_MAX_SELECTION_RETRY 10
/* timeout control macro */
#define SCSI_LOW_TIMEOUT_HZ 10
#define SCSI_LOW_MIN_TOUT 12
#define SCSI_LOW_TIMEOUT_CHECK_INTERVAL 1
#define SCSI_LOW_POWDOWN_TC 15
#define SCSI_LOW_MAX_PHCHANGES 256
#define SCSI2_RESET_DELAY 5000000
/* msg */
#define SCSI_LOW_MAX_MSGLEN 32
#define SCSI_LOW_MSG_LOG_DATALEN 8
/*************************************************
* Scsi Data Pointer
*************************************************/
/* scsi pointer */
struct sc_p {
u_int8_t *scp_data;
int scp_datalen;
u_int8_t *scp_cmd;
int scp_cmdlen;
u_int8_t scp_direction;
#define SCSI_LOW_RWUNK (-1)
#define SCSI_LOW_WRITE 0
#define SCSI_LOW_READ 1
u_int8_t scp_status;
u_int8_t scp_spare[2];
};
/*************************************************
* Command Control Block Structure
*************************************************/
typedef int scsi_low_tag_t;
struct targ_info;
#define SCSI_LOW_UNKLUN ((u_int) -1)
#define SCSI_LOW_UNKTAG ((scsi_low_tag_t) -1)
struct slccb {
TAILQ_ENTRY(slccb) ccb_chain;
void *osdep; /* os depend structure */
struct targ_info *ti; /* targ_info */
struct lun_info *li; /* lun info */
struct buf *bp; /* io bufs */
scsi_low_tag_t ccb_tag; /* effective qtag */
scsi_low_tag_t ccb_otag; /* allocated qtag */
/*****************************************
* Scsi data pointers (original and saved)
*****************************************/
struct sc_p ccb_scp; /* given */
struct sc_p ccb_sscp; /* saved scsi data pointer */
int ccb_datalen; /* transfered data counter */
/*****************************************
* Msgout
*****************************************/
u_int ccb_msgoutflag;
u_int ccb_omsgoutflag;
/*****************************************
* Error or Timeout counters
*****************************************/
u_int ccb_flags;
#define CCB_INTERNAL 0x0001
#define CCB_SENSE 0x0002
#define CCB_CLEARQ 0x0004
#define CCB_DISCQ 0x0008
#define CCB_STARTQ 0x0010
#define CCB_POLLED 0x0100 /* polling ccb */
#define CCB_NORETRY 0x0200 /* do NOT retry */
#define CCB_AUTOSENSE 0x0400 /* do a sence after CA */
#define CCB_URGENT 0x0800 /* an urgent ccb */
#define CCB_NOSDONE 0x1000 /* do not call an os done routine */
#define CCB_SCSIIO 0x2000 /* a normal scsi io coming from upper layer */
#define CCB_SILENT 0x4000 /* no terminate messages */
u_int ccb_error;
int ccb_rcnt; /* retry counter */
int ccb_selrcnt; /* selection retry counter */
int ccb_tc; /* timer counter */
int ccb_tcmax; /* max timeout */
/*****************************************
* Sense data buffer
*****************************************/
u_int8_t ccb_scsi_cmd[12];
scsi_low_osdep_sense_data_t ccb_sense;
};
/*************************************************
* Slccb functions
*************************************************/
GENERIC_CCB_ASSERT(scsi_low, slccb)
/*************************************************
* Target and Lun structures
*************************************************/
struct scsi_low_softc;
LIST_HEAD(scsi_low_softc_tab, scsi_low_softc);
TAILQ_HEAD(targ_info_tab, targ_info);
LIST_HEAD(lun_info_tab, lun_info);
struct lun_info {
struct scsi_low_osdep_lun_interface li_sloi;
int li_lun;
struct targ_info *li_ti; /* my target */
LIST_ENTRY(lun_info) lun_chain; /* targ_info link */
struct slccbtab li_discq; /* disconnect queue */
/*
* qtag control
*/
int li_maxnexus;
int li_maxnqio;
int li_nqio;
int li_disc;
#define SCSI_LOW_MAXNEXUS (sizeof(u_int) * NBBY)
u_int li_qtagbits;
#ifdef SCSI_LOW_ALT_QTAG_ALLOCATE
u_int8_t li_qtagarray[SCSI_LOW_MAXNEXUS];
u_int li_qd;
#endif /* SCSI_LOW_ALT_QTAG_ALLOCATE */
#define SCSI_LOW_QFLAG_CA_QCLEAR 0x01
u_int li_qflags;
/*
* lun state
*/
#define SCSI_LOW_LUN_SLEEP 0x00
#define SCSI_LOW_LUN_START 0x01
#define SCSI_LOW_LUN_INQ 0x02
#define SCSI_LOW_LUN_MODEQ 0x03
#define SCSI_LOW_LUN_OK 0x04
u_int li_state; /* target lun state */
/*
* lun control flags
*/
u_int li_flags_valid; /* valid flags */
#define SCSI_LOW_LUN_FLAGS_USER_VALID 0x0001
#define SCSI_LOW_LUN_FLAGS_DISK_VALID 0x0002
#define SCSI_LOW_LUN_FLAGS_QUIRKS_VALID 0x0004
#define SCSI_LOW_LUN_FLAGS_ALL_VALID \
(SCSI_LOW_LUN_FLAGS_USER_VALID | \
SCSI_LOW_LUN_FLAGS_DISK_VALID | SCSI_LOW_LUN_FLAGS_QUIRKS_VALID)
u_int li_flags; /* real lun control flags */
u_int li_cfgflags; /* lun control flags given by user */
u_int li_diskflags; /* lun control flags given by hardware info */
u_int li_quirks; /* lun control flags given by upper layer */
/* inq buffer */
struct scsi_low_inq_data {
u_int8_t sd_type;
u_int8_t sd_sp1;
u_int8_t sd_version;
u_int8_t sd_resp;
u_int8_t sd_len;
u_int8_t sd_sp2[2];
u_int8_t sd_support;
} __packed li_inq;
/* modeq buffer */
struct scsi_low_mode_sense_data {
u_int8_t sms_header[4];
struct {
u_int8_t cmp_page;
u_int8_t cmp_length;
u_int8_t cmp_rlec;
u_int8_t cmp_qc;
u_int8_t cmp_eca;
u_int8_t cmp_spare[3];
} __packed sms_cmp;
} li_sms;
};
struct scsi_low_msg_log {
int slml_ptr;
struct {
u_int8_t msg[2];
} slml_msg[SCSI_LOW_MSG_LOG_DATALEN];
};
struct targ_info {
struct scsi_low_osdep_targ_interface ti_slti;
TAILQ_ENTRY(targ_info) ti_chain; /* targ_info link */
struct scsi_low_softc *ti_sc; /* our softc */
u_int ti_id; /* scsi id */
/*
* Lun chain
*/
struct lun_info_tab ti_litab; /* lun chain */
/*
* total disconnected nexus
*/
int ti_disc;
/*
* Scsi phase control
*/
#define PH_NULL 0x00
#define PH_ARBSTART 0x01
#define PH_SELSTART 0x02
#define PH_SELECTED 0x03
#define PH_CMD 0x04
#define PH_DATA 0x05
#define PH_MSGIN 0x06
#define PH_MSGOUT 0x07
#define PH_STAT 0x08
#define PH_DISC 0x09
#define PH_RESEL 0x0a
u_int ti_phase; /* scsi phase */
u_int ti_ophase; /* old scsi phase */
/*
* Msg in
*/
u_int ti_msginptr; /* msgin ptr */
u_int ti_msginlen; /* expected msg length */
int ti_msgin_parity_error; /* parity error detected */
u_int8_t ti_msgin[SCSI_LOW_MAX_MSGLEN]; /* msgin buffer */
/*
* Msg out
*/
u_int ti_msgflags; /* msgs to be asserted */
u_int ti_omsgflags; /* msgs asserted */
u_int ti_emsgflags; /* a msg currently asserted */
#define SCSI_LOW_MSG_RESET 0x00000001
#define SCSI_LOW_MSG_REJECT 0x00000002
#define SCSI_LOW_MSG_PARITY 0x00000004
#define SCSI_LOW_MSG_ERROR 0x00000008
#define SCSI_LOW_MSG_IDENTIFY 0x00000010
#define SCSI_LOW_MSG_ABORT 0x00000020
#define SCSI_LOW_MSG_TERMIO 0x00000040
#define SCSI_LOW_MSG_SIMPLE_QTAG 0x00000080
#define SCSI_LOW_MSG_ORDERED_QTAG 0x00000100
#define SCSI_LOW_MSG_HEAD_QTAG 0x00000200
#define SCSI_LOW_MSG_ABORT_QTAG 0x00000400
#define SCSI_LOW_MSG_CLEAR_QTAG 0x00000800
#define SCSI_LOW_MSG_WIDE 0x00001000
#define SCSI_LOW_MSG_SYNCH 0x00002000
#define SCSI_LOW_MSG_NOOP 0x00004000
#define SCSI_LOW_MSG_LAST 0x00008000
#define SCSI_LOW_MSG_ALL 0xffffffff
/* msgout buffer */
u_int8_t ti_msgoutstr[SCSI_LOW_MAX_MSGLEN]; /* scsi msgout */
u_int ti_msgoutlen; /* msgout strlen */
/*
* target initialize msgout
*/
u_int ti_setup_msg; /* setup msgout requests */
u_int ti_setup_msg_done;
/*
* synch and wide data info
*/
u_int ti_flags_valid; /* valid flags */
#define SCSI_LOW_TARG_FLAGS_USER_VALID 0x0001
#define SCSI_LOW_TARG_FLAGS_DISK_VALID 0x0002
#define SCSI_LOW_TARG_FLAGS_QUIRKS_VALID 0x0004
#define SCSI_LOW_TARG_FLAGS_ALL_VALID \
(SCSI_LOW_TARG_FLAGS_USER_VALID | \
SCSI_LOW_TARG_FLAGS_DISK_VALID | SCSI_LOW_TARG_FLAGS_QUIRKS_VALID)
u_int ti_diskflags; /* given target disk flags */
u_int ti_quirks; /* given target quirk */
struct synch {
u_int8_t offset;
u_int8_t period;
} ti_osynch, ti_maxsynch; /* synch data */
#define SCSI_LOW_BUS_WIDTH_8 0
#define SCSI_LOW_BUS_WIDTH_16 1
#define SCSI_LOW_BUS_WIDTH_32 2
u_int ti_owidth, ti_width;
/*
* lun info size.
*/
int ti_lunsize;
#ifdef SCSI_LOW_DIAGNOSTIC
struct scsi_low_msg_log ti_log_msgout;
struct scsi_low_msg_log ti_log_msgin;
#endif /* SCSI_LOW_DIAGNOSTIC */
};
/*************************************************
* COMMON HEADER STRUCTURE
*************************************************/
struct scsi_low_softc;
struct proc;
typedef struct scsi_low_softc *sc_low_t;
#define SCSI_LOW_START_OK 0
#define SCSI_LOW_START_FAIL 1
#define SCSI_LOW_INFO_ALLOC 0
#define SCSI_LOW_INFO_REVOKE 1
#define SCSI_LOW_INFO_DEALLOC 2
#define SCSI_LOW_POWDOWN 1
#define SCSI_LOW_ENGAGE 2
#define SC_LOW_INIT_T (int (*)(sc_low_t, int))
#define SC_LOW_BUSRST_T (void (*)(sc_low_t))
#define SC_LOW_TARG_INIT_T (int (*)(sc_low_t, struct targ_info *, int))
#define SC_LOW_LUN_INIT_T (int (*)(sc_low_t, struct targ_info *, struct lun_info *, int))
#define SC_LOW_SELECT_T (int (*)(sc_low_t, struct slccb *))
#define SC_LOW_ATTEN_T (void (*)(sc_low_t))
#define SC_LOW_NEXUS_T (int (*)(sc_low_t))
#define SC_LOW_MSG_T (int (*)(sc_low_t, struct targ_info *, u_int))
#define SC_LOW_POLL_T (int (*)(void *))
#define SC_LOW_POWER_T (int (*)(sc_low_t, u_int))
#define SC_LOW_TIMEOUT_T (int (*)(sc_low_t))
struct scsi_low_funcs {
int (*scsi_low_init)(sc_low_t, int);
void (*scsi_low_bus_reset)(sc_low_t);
int (*scsi_low_targ_init)(sc_low_t, struct targ_info *, int);
int (*scsi_low_lun_init)(sc_low_t, struct targ_info *, struct lun_info *, int);
int (*scsi_low_start_bus)(sc_low_t, struct slccb *);
int (*scsi_low_establish_lun_nexus)(sc_low_t);
int (*scsi_low_establish_ccb_nexus)(sc_low_t);
void (*scsi_low_attention)(sc_low_t);
int (*scsi_low_msg)(sc_low_t, struct targ_info *, u_int);
int (*scsi_low_timeout)(sc_low_t);
int (*scsi_low_poll)(void *);
int (*scsi_low_power)(sc_low_t, u_int);
int (*scsi_low_ioctl)(sc_low_t, u_long, caddr_t, int, struct proc *);
};
struct scsi_low_softc {
/* os depend structure */
struct scsi_low_osdep_interface sl_si;
#define sl_dev sl_si.si_dev
struct scsi_low_osdep_funcs *sl_osdep_fp;
u_char sl_xname[16];
/* our chain */
LIST_ENTRY(scsi_low_softc) sl_chain;
/* my targets */
struct targ_info *sl_ti[SCSI_LOW_NTARGETS];
struct targ_info_tab sl_titab;
/* current active T_L_Q nexus */
struct targ_info *sl_Tnexus; /* Target nexus */
struct lun_info *sl_Lnexus; /* Lun nexus */
struct slccb *sl_Qnexus; /* Qtag nexus */
int sl_nexus_call;
/* ccb start queue */
struct slccbtab sl_start;
/* retry limit and phase change counter */
int sl_max_retry;
int sl_ph_count;
int sl_timeout_count;
/* selection & total num disconnect targets */
int sl_nio;
int sl_disc;
int sl_retry_sel;
struct slccb *sl_selid;
/* attention */
int sl_atten; /* ATN asserted */
int sl_clear_atten; /* negate ATN required */
/* scsi phase suggested by scsi msg */
u_int sl_msgphase;
#define MSGPH_NULL 0x00 /* no msg */
#define MSGPH_DISC 0x01 /* disconnect msg */
#define MSGPH_CMDC 0x02 /* cmd complete msg */
#define MSGPH_ABORT 0x03 /* abort seq */
#define MSGPH_TERM 0x04 /* current io terminate */
#define MSGPH_LCTERM 0x05 /* cmd link terminated */
#define MSGPH_RESET 0x06 /* reset target */
/* error */
u_int sl_error; /* error flags */
#define FATALIO 0x0001 /* generic io error & retry io */
#define ABORTIO 0x0002 /* generic io error & terminate io */
#define TIMEOUTIO 0x0004 /* watch dog timeout */
#define SELTIMEOUTIO 0x0008 /* selection timeout */
#define PDMAERR 0x0010 /* dma xfer error */
#define MSGERR 0x0020 /* msgsys error */
#define PARITYERR 0x0040 /* parity error */
#define BUSYERR 0x0080 /* target busy error */
#define STATERR 0x0100 /* status error */
#define UACAERR 0x0200 /* target CA state, no sense check */
#define SENSEIO 0x1000 /* cmd not excuted but sense data ok */
#define SENSEERR 0x2000 /* cmd not excuted and sense data bad */
#define UBFERR 0x4000 /* unexpected bus free */
#define PENDINGIO 0x8000 /* ccb start not yet */
#define SCSI_LOW_ERRORBITS "\020\017ubferr\016senseerr\015senseio\012uacaerr\011staterr\010busy\007parity\006msgerr\005pdmaerr\004seltimeout\003timeout\002abort\001fatal"
/* current scsi data pointer */
struct sc_p sl_scp;
/* power control */
u_int sl_active; /* host is busy state */
int sl_powc; /* power down timer counter */
u_int sl_rstep; /* resume step */
/* configuration flags */
u_int sl_flags;
#define HW_POWDOWN 0x0001
#define HW_RESUME 0x0002
#define HW_PDMASTART 0x0004
#define HW_INACTIVE 0x0008
#define HW_POWERCTRL 0x0010
#define HW_INITIALIZING 0x0020
#define HW_READ_PADDING 0x1000
#define HW_WRITE_PADDING 0x2000
u_int sl_cfgflags;
#define CFG_NODISC 0x0001
#define CFG_NOPARITY 0x0002
#define CFG_NOATTEN 0x0004
#define CFG_ASYNC 0x0008
#define CFG_NOQTAG 0x0010
int sl_show_result;
#define SHOW_SYNCH_NEG 0x0001
#define SHOW_WIDE_NEG 0x0002
#define SHOW_CALCF_RES 0x0010
#define SHOW_PROBE_RES 0x0020
#define SHOW_ALL_NEG -1
/* host informations */
u_int sl_hostid;
int sl_nluns;
int sl_ntargs;
int sl_openings;
/* interface functions */
struct scsi_low_funcs *sl_funcs;
/* targinfo size */
int sl_targsize;
#if defined(i386) || defined(__i386__)
u_int sl_irq; /* XXX */
#endif /* i386 */
};
/*************************************************
* SCSI LOW service functions
*************************************************/
/*
* Scsi low attachment function.
*/
int scsi_low_attach(struct scsi_low_softc *, int, int, int, int, int);
int scsi_low_dettach(struct scsi_low_softc *);
/*
* Scsi low interface activate or deactivate functions
*/
int scsi_low_is_busy(struct scsi_low_softc *);
int scsi_low_activate(struct scsi_low_softc *);
int scsi_low_deactivate(struct scsi_low_softc *);
/*
* Scsi phase "bus service" functions.
* These functions are corresponding to each scsi bus phaeses.
*/
/* bus idle phase (other initiators or targets release bus) */
void scsi_low_bus_idle(struct scsi_low_softc *);
/* arbitration and selection phase */
void scsi_low_arbit_fail(struct scsi_low_softc *, struct slccb *);
static __inline void scsi_low_arbit_win(struct scsi_low_softc *);
/* msgout phase */
#define SCSI_LOW_MSGOUT_INIT 0x00000001
#define SCSI_LOW_MSGOUT_UNIFY 0x00000002
int scsi_low_msgout(struct scsi_low_softc *, struct targ_info *, u_int);
/* msgin phase */
#define SCSI_LOW_DATA_PE 0x80000000
int scsi_low_msgin(struct scsi_low_softc *, struct targ_info *, u_int);
/* statusin phase */
static __inline int scsi_low_statusin(struct scsi_low_softc *, struct targ_info *, u_int);
/* data phase */
int scsi_low_data(struct scsi_low_softc *, struct targ_info *, struct buf **, int);
static __inline void scsi_low_data_finish(struct scsi_low_softc *);
/* cmd phase */
int scsi_low_cmd(struct scsi_low_softc *, struct targ_info *);
/* reselection phase */
struct targ_info *scsi_low_reselected(struct scsi_low_softc *, u_int);
/* disconnection phase */
int scsi_low_disconnected(struct scsi_low_softc *, struct targ_info *);
/*
* Scsi bus restart function.
* Canncel all established nexuses => scsi system initialized => restart jobs.
*/
#define SCSI_LOW_RESTART_HARD 1
#define SCSI_LOW_RESTART_SOFT 0
int scsi_low_restart(struct scsi_low_softc *, int, u_char *);
/*
* Scsi utility fucntions
*/
/* print current status */
void scsi_low_print(struct scsi_low_softc *, struct targ_info *);
/* bus reset utility */
void scsi_low_bus_reset(struct scsi_low_softc *);
/*************************************************
* Message macro defs
*************************************************/
#define SCSI_LOW_SETUP_PHASE(ti, phase) \
{ \
(ti)->ti_ophase = ti->ti_phase; \
(ti)->ti_phase = (phase); \
}
#define SCSI_LOW_SETUP_MSGPHASE(slp, PHASE) \
{ \
(slp)->sl_msgphase = (PHASE); \
}
#define SCSI_LOW_ASSERT_ATN(slp) \
{ \
(slp)->sl_atten = 1; \
}
#define SCSI_LOW_DEASSERT_ATN(slp) \
{ \
(slp)->sl_atten = 0; \
}
/*************************************************
* Inline functions
*************************************************/
static __inline void scsi_low_attention(struct scsi_low_softc *);
static __inline int scsi_low_is_msgout_continue(struct targ_info *, u_int);
static __inline int scsi_low_assert_msg(struct scsi_low_softc *, struct targ_info *, u_int, int);
static __inline int scsi_low_is_disconnect_ok(struct slccb *);
static __inline int
scsi_low_is_msgout_continue(ti, mask)
struct targ_info *ti;
u_int mask;
{
return ((ti->ti_msgflags & (~mask)) != 0);
}
static __inline int
scsi_low_is_disconnect_ok(cb)
struct slccb *cb;
{
return ((cb->li->li_flags & SCSI_LOW_DISC) != 0 &&
(cb->ccb_flags & (CCB_SENSE | CCB_CLEARQ)) == 0);
}
static __inline void
scsi_low_attention(slp)
struct scsi_low_softc *slp;
{
if (slp->sl_atten != 0)
return;
(*slp->sl_funcs->scsi_low_attention) (slp);
SCSI_LOW_ASSERT_ATN(slp);
}
static __inline int
scsi_low_assert_msg(slp, ti, msg, now)
struct scsi_low_softc *slp;
struct targ_info *ti;
u_int msg;
int now;
{
ti->ti_msgflags |= msg;
if (now != 0)
scsi_low_attention(slp);
return 0;
}
static __inline void
scsi_low_arbit_win(slp)
struct scsi_low_softc *slp;
{
slp->sl_selid = NULL;
}
static __inline void
scsi_low_data_finish(slp)
struct scsi_low_softc *slp;
{
if (slp->sl_Qnexus != NULL)
{
slp->sl_Qnexus->ccb_datalen = slp->sl_scp.scp_datalen;
}
}
static __inline int
scsi_low_statusin(slp, ti, c)
struct scsi_low_softc *slp;
struct targ_info *ti;
u_int c;
{
slp->sl_ph_count ++;
if ((c & SCSI_LOW_DATA_PE) != 0)
{
scsi_low_assert_msg(slp, ti, SCSI_LOW_MSG_ERROR, 0);
return EIO;
}
slp->sl_scp.scp_status = (u_int8_t) c;
return 0;
}
/*************************************************
* Message out defs
*************************************************/
/* XXX: use scsi_message.h */
#define ST_GOOD 0x00
#define ST_CHKCOND 0x02
#define ST_MET 0x04
#define ST_BUSY 0x08
#define ST_INTERGOOD 0x10
#define ST_INTERMET 0x14
#define ST_CONFLICT 0x18
#define ST_CMDTERM 0x22
#define ST_QUEFULL 0x28
#define ST_UNKNOWN 0xff
#define MSG_COMP 0x00
#define MSG_EXTEND 0x01
#define MKMSG_EXTEND(XLEN, XCODE) ((((u_int)(XLEN)) << NBBY) | ((u_int)(XCODE)))
#define MSG_EXTEND_MDPCODE 0x00
#define MSG_EXTEND_MDPLEN 0x05
#define MSG_EXTEND_SYNCHCODE 0x01
#define MSG_EXTEND_SYNCHLEN 0x03
#define MSG_EXTEND_WIDECODE 0x03
#define MSG_EXTEND_WIDELEN 0x02
#define MSG_SAVESP 0x02
#define MSG_RESTORESP 0x03
#define MSG_DISCON 0x04
#define MSG_I_ERROR 0x05
#define MSG_ABORT 0x06
#define MSG_REJECT 0x07
#define MSG_NOOP 0x08
#define MSG_PARITY 0x09
#define MSG_LCOMP 0x0a
#define MSG_LCOMP_F 0x0b
#define MSG_RESET 0x0c
#define MSG_ABORT_QTAG 0x0d
#define MSG_CLEAR_QTAG 0x0e
#define MSG_TERM_IO 0x11
#define MSG_SIMPLE_QTAG 0x20
#define MSG_HEAD_QTAG 0x21
#define MSG_ORDERED_QTAG 0x22
#define MSG_IDENTIFY 0x80
#define MSG_IDENTIFY_DISCPRIV 0x40
#endif /* !_SCSI_LOW_H_ */