93f4eda975
This fixes the european frequency set, separates this further from the Meteor driver and fixes bugs.
4138 lines
101 KiB
C
4138 lines
101 KiB
C
/* BT848 1.3-ALPHA Driver for Brooktree's Bt848 based cards.
|
|
The Brooktree BT848 Driver driver is based upon Mark Tinguely and
|
|
Jim Lowe's driver for the Matrox Meteor PCI card . The
|
|
Philips SAA 7116 and SAA 7196 are very different chipsets than
|
|
the BT848. For starters, the BT848 is a one chipset solution and
|
|
it incorporates a RISC engine to control the DMA transfers --
|
|
that is it the actual dma process is control by a program which
|
|
resides in the hosts memory also the register definitions between
|
|
the Philips chipsets and the Bt848 are very different.
|
|
|
|
The original copyright notice by Mark and Jim is included mostly
|
|
to honor their fantastic work in the Matrox Meteor driver!
|
|
|
|
Enjoy,
|
|
Amancio
|
|
|
|
*/
|
|
|
|
/*
|
|
* 1. Redistributions of source code must retain the
|
|
* Copyright (c) 1997 Amancio Hasty
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Amancio Hasty
|
|
* 4. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
|
|
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
|
|
|
|
|
|
/*
|
|
* 1. Redistributions of source code must retain the
|
|
* Copyright (c) 1995 Mark Tinguely and Jim Lowe
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Mark Tinguely and Jim Lowe
|
|
* 4. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
|
|
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/* Change History:
|
|
1.0 1/24/97 First Alpha release
|
|
|
|
1.1 2/20/97 Added video ioctl so we can do PCI To PCI
|
|
data transfers. This is for capturing data
|
|
directly to a vga frame buffer which has
|
|
a linear frame buffer. Minor code clean-up.
|
|
|
|
1.3 2/23/97 Fixed system lock-up reported by
|
|
Randall Hopper <rhh@ct.picker.com>. This
|
|
problem seems somehow to be exhibited only
|
|
in his system. I changed the setting of
|
|
INT_MASK for CAP_CONTINUOUS to be exactly
|
|
the same as CAP_SINGLE apparently setting
|
|
bit 23 cleared the system lock up.
|
|
version 1.1 of the driver has been reported
|
|
to work with STB's WinTv, Hauppage's Wincast/Tv
|
|
and last but not least with the Intel Smart
|
|
Video Recorder.
|
|
|
|
1.4 3/9/97 fsmp@freefall.org
|
|
Merged code to support tuners on STB and WinCast
|
|
cards.
|
|
Modifications to the contrast and chroma ioctls.
|
|
Textual cleanup.
|
|
|
|
1.5 3/15/97 fsmp@freefall.org
|
|
new bt848 specific versions of hue/bright/
|
|
contrast/satu/satv.
|
|
Amancio's patch to fix "screen freeze" problem.
|
|
|
|
1.6 3/19/97 fsmp@freefall.org
|
|
new table-driven frequency lookup.
|
|
removed disable_intr()/enable_intr() calls from i2c.
|
|
misc. cleanup.
|
|
|
|
1.7 3/19/97 fsmp@freefall.org
|
|
added audio support submitted by:
|
|
Michael Petry <petry@netwolf.NetMasters.com>
|
|
|
|
1.8 3/20/97 fsmp@freefall.org
|
|
extended audio support.
|
|
card auto-detection.
|
|
major cleanup, order of routines, declarations, etc.
|
|
|
|
1.9 3/22/97 fsmp@freefall.org
|
|
merged in Amancio's minor unit for tuner control
|
|
mods.
|
|
misc. cleanup, especially in the _intr routine.
|
|
made AUDIO_SUPPORT mainline code.
|
|
|
|
1.10 3/23/97 fsmp@freefall.org
|
|
added polled hardware i2c routines,
|
|
removed all existing software i2c routines.
|
|
created software i2cProbe() routine.
|
|
Randall Hopper's fixes of BT848_GHUE & BT848_GBRIG.
|
|
eeprom support.
|
|
|
|
1.11 3/24/97 fsmp@freefall.org
|
|
Louis Mamakos's new bt848 struct.
|
|
|
|
1.12 3/25/97 fsmp@freefall.org
|
|
japanese freq table from Naohiro Shichijo.
|
|
new table structs for tuner lookups.
|
|
major scrub for "magic numbers".
|
|
|
|
1.13 3/28/97 fsmp@freefall.org
|
|
1st PAL support.
|
|
MAGIC_[1-4] demarcates magic #s needing PAL work.
|
|
AFC code submitted by Richard Tobin
|
|
<richard@cogsci.ed.ac.uk>.
|
|
|
|
1.14 3/29/97 richard@cogsci.ed.ac.uk
|
|
PAL support: magic numbers moved into
|
|
format_params structure.
|
|
Revised AFC interface.
|
|
fixed DMA_PROG_ALLOC size misdefinition.
|
|
|
|
1.15 4/18/97 John-Mark Gurney <gurney_j@resnet.uoregon.edu>
|
|
Added [SR]RGBMASKs ioctl for byte swapping.
|
|
|
|
1.16 4/20/97 Randall Hopper <rhh@ct.picker.com>
|
|
Generalized RGBMASK ioctls for general pixel
|
|
format setting [SG]ACTPIXFMT, and added query API
|
|
to return driver-supported pix fmts GSUPPIXFMT.
|
|
|
|
1.17 4/21/97 hasty@rah.star-gate.com
|
|
Clipping support added.
|
|
|
|
1.18 4/23/97 Clean up after failed CAP_SINGLEs where bt
|
|
interrupt isn't delivered, and fixed fixing
|
|
CAP_SINGLEs that for ODD_ONLY fields.
|
|
1.19 9/8/97 improved yuv support , cleaned up weurope
|
|
channel table, incorporated cleanup work from
|
|
Luigi, fixed pci interface bug due to a
|
|
change in the pci interface which disables
|
|
interrupts from a PCI device by default,
|
|
Added Luigi's, ioctl's BT848_SLNOTCH,
|
|
BT848_GLNOTCH (set luma notch and get luma not)
|
|
*/
|
|
|
|
#define DDB(x) x
|
|
#define DEB(x)
|
|
|
|
#ifdef __FreeBSD__
|
|
#include "bktr.h"
|
|
#include "pci.h"
|
|
#endif /* __FreeBSD__ */
|
|
|
|
#if !defined(__FreeBSD__) || (NBKTR > 0 && NPCI > 0)
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/protosw.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/uio.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/signalvar.h>
|
|
#include <sys/mman.h>
|
|
|
|
#include <vm/vm.h>
|
|
#include <vm/vm_kern.h>
|
|
#include <vm/vm_param.h>
|
|
#include <vm/pmap.h>
|
|
#include <vm/vm_extern.h>
|
|
|
|
#ifdef __FreeBSD__
|
|
#ifdef DEVFS
|
|
#include <sys/devfsext.h>
|
|
#endif /* DEVFS */
|
|
#include <machine/clock.h>
|
|
#include <pci/pcivar.h>
|
|
#include <pci/pcireg.h>
|
|
|
|
#include <machine/ioctl_meteor.h>
|
|
#include <machine/ioctl_bt848.h> /* extensions to ioctl_meteor.h */
|
|
#include <pci/brktree_reg.h>
|
|
|
|
typedef int ioctl_cmd_t;
|
|
#endif /* __FreeBSD__ */
|
|
|
|
#ifdef __bsdi__
|
|
#include <sys/device.h>
|
|
#include <i386/isa/isa.h>
|
|
#include <i386/isa/isavar.h>
|
|
#include <i386/isa/icu.h>
|
|
#include <i386/pci/pci.h>
|
|
#include <i386/isa/dma.h>
|
|
#include <i386/eisa/eisa.h>
|
|
#include "ioctl_meteor.h"
|
|
#include "ioctl_bt848.h"
|
|
#include "bt848_reg.h"
|
|
|
|
typedef u_long ioctl_cmd_t;
|
|
|
|
#define pci_conf_read(a, r) pci_inl(a, r)
|
|
#define pci_conf_write(a, r, v) pci_outl(a, r, v)
|
|
#include <sys/reboot.h>
|
|
#define bootverbose (autoprint & (AC_VERBOSE|AC_DEBUG))
|
|
#endif /* __bsdi__ */
|
|
|
|
typedef u_char bool_t;
|
|
|
|
#define BKTPRI (PZERO+8)|PCATCH
|
|
|
|
static void bktr_intr __P((void *arg));
|
|
|
|
|
|
/*
|
|
* memory allocated for DMA programs
|
|
*/
|
|
#define DMA_PROG_ALLOC (8 * PAGE_SIZE)
|
|
|
|
/* When to split a dma transfer , the bt848 has timing as well as
|
|
dma transfer size limitations so that we have to split dma
|
|
transfers into two dma requests
|
|
*/
|
|
#define DMA_BT848_SPLIT 319*2
|
|
|
|
/*
|
|
* Allocate enough memory for:
|
|
* 768x576 RGB 16 or YUV (16 storage bits/pixel) = 884736 = 216 pages
|
|
*
|
|
* You may override this using the options "BROOKTREE_ALLOC_PAGES=value"
|
|
* in your kernel configuration file.
|
|
*/
|
|
|
|
#ifndef BROOKTREE_ALLOC_PAGES
|
|
#define BROOKTREE_ALLOC_PAGES 217*4
|
|
#endif
|
|
#define BROOKTREE_ALLOC (BROOKTREE_ALLOC_PAGES * PAGE_SIZE)
|
|
|
|
#ifdef __FreeBSD__
|
|
|
|
static bktr_reg_t brooktree[ NBKTR ];
|
|
#define BROOKTRE_NUM(mtr) ((bktr - &brooktree[0])/sizeof(bktr_reg_t))
|
|
|
|
#define BKTRPRI (PZERO+8)|PCATCH
|
|
#define UNIT(x) ((x) & 0x0f)
|
|
#define MINOR(x) ((x >> 4) & 0x0f)
|
|
#define ATTACH_ARGS pcici_t tag, int unit
|
|
|
|
static char* bktr_probe( pcici_t tag, pcidi_t type );
|
|
static void bktr_attach( ATTACH_ARGS );
|
|
|
|
static u_long bktr_count;
|
|
|
|
static struct pci_device bktr_device = {
|
|
"bktr",
|
|
bktr_probe,
|
|
bktr_attach,
|
|
&bktr_count
|
|
};
|
|
|
|
DATA_SET (pcidevice_set, bktr_device);
|
|
|
|
static d_open_t bktr_open;
|
|
static d_close_t bktr_close;
|
|
static d_read_t bktr_read;
|
|
static d_write_t bktr_write;
|
|
static d_ioctl_t bktr_ioctl;
|
|
static d_mmap_t bktr_mmap;
|
|
|
|
#define CDEV_MAJOR 79
|
|
static struct cdevsw bktr_cdevsw =
|
|
{
|
|
bktr_open, bktr_close, bktr_read, bktr_write,
|
|
bktr_ioctl, nostop, nullreset, nodevtotty,
|
|
seltrue, bktr_mmap, NULL, "bktr",
|
|
NULL, -1
|
|
};
|
|
#endif /* __FreeBSD__ */
|
|
|
|
#ifdef __bsdi__
|
|
#define UNIT dv_unit
|
|
#define MINOR dv_subunit
|
|
#define ATTACH_ARGS \
|
|
struct device * const parent, struct device * const self, void * const aux
|
|
|
|
static void bktr_attach( ATTACH_ARGS );
|
|
#define NBKTR bktrcd.cd_ndevs
|
|
#define brooktree *((bktr_ptr_t *)bktrcd.cd_devs)
|
|
|
|
static int bktr_spl;
|
|
static int bktr_intr_returning_1(void *arg) { bktr_intr(arg); return (1);}
|
|
#define disable_intr() { bktr_spl = splhigh(); }
|
|
#define enable_intr() { splx(bktr_spl); }
|
|
static int bktr_intr_returning_1(void *arg) { bktr_intr(arg); return (1);}
|
|
|
|
static int
|
|
bktr_pci_match(pci_devaddr_t *pa)
|
|
{
|
|
unsigned id;
|
|
|
|
id = pci_inl(pa, PCI_VENDOR_ID);
|
|
if (id != BROOKTREE_848_ID) {
|
|
aprint_debug("bktr_pci_match got %x\n", id);
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
pci_devres_t bktr_res; /* XXX only remembers last one, helps debug */
|
|
|
|
static int
|
|
bktr_probe(struct device *parent, struct cfdata *cf, void *aux)
|
|
{
|
|
pci_devaddr_t *pa;
|
|
pci_devres_t res;
|
|
struct isa_attach_args *ia = aux;
|
|
|
|
if (ia->ia_bustype != BUS_PCI)
|
|
return (0);
|
|
|
|
if ((pa = pci_scan(bktr_pci_match)) == NULL)
|
|
return (0);
|
|
|
|
pci_getres(pa, &bktr_res, 1, ia);
|
|
if (ia->ia_maddr == 0) {
|
|
printf("bktr%d: no mem attached\n", cf->cf_unit);
|
|
return (0);
|
|
}
|
|
ia->ia_aux = pa;
|
|
return 1;
|
|
}
|
|
|
|
|
|
struct cfdriver bktrcd =
|
|
{ 0, "bktr", bktr_probe, bktr_attach, DV_DULL, sizeof(bktr_reg_t) };
|
|
|
|
int bktr_open __P((dev_t, int, int, struct proc *));
|
|
int bktr_close __P((dev_t, int, int, struct proc *));
|
|
int bktr_read __P((dev_t, struct uio *, int));
|
|
int bktr_write __P((dev_t, struct uio *, int));
|
|
int bktr_ioctl __P((dev_t, ioctl_cmd_t, caddr_t, int, struct proc *));
|
|
int bktr_mmap __P((dev_t, int, int));
|
|
|
|
struct devsw bktrsw = {
|
|
&bktrcd,
|
|
bktr_open, bktr_close, bktr_read, bktr_write, bktr_ioctl,
|
|
seltrue, bktr_mmap, NULL, nodump, NULL, 0, nostop
|
|
};
|
|
#endif /* __bsdi__ */
|
|
|
|
/*
|
|
* This is for start-up convenience only, NOT mandatory.
|
|
*/
|
|
#if !defined( DEFAULT_CHNLSET )
|
|
#define DEFAULT_CHNLSET CHNLSET_WEUROPE
|
|
#endif
|
|
|
|
/*
|
|
* Parameters describing size of transmitted image.
|
|
*/
|
|
|
|
static struct format_params format_params[] = {
|
|
#define FORMAT_PARAMS_NTSC525 0
|
|
{ 525, 22, 480, 910, 135, 754, 640, 780, 30 },
|
|
#define FORMAT_PARAMS_PAL625 1
|
|
{ 625, 32, 576, 1135, 186, 922, 768, 944, 25 }
|
|
};
|
|
|
|
/*
|
|
* Table of supported Pixel Formats
|
|
*/
|
|
|
|
static struct meteor_pixfmt_internal {
|
|
struct meteor_pixfmt public;
|
|
u_int color_fmt;
|
|
} pixfmt_table[] = {
|
|
|
|
{ { 0, METEOR_PIXTYPE_RGB, 2, { 0x7c00, 0x03e0, 0x001f }, 0,0 }, 0x33 },
|
|
{ { 0, METEOR_PIXTYPE_RGB, 2, { 0x7c00, 0x03e0, 0x001f }, 1,0 }, 0x33 },
|
|
|
|
{ { 0, METEOR_PIXTYPE_RGB, 2, { 0xf800, 0x07e0, 0x001f }, 0,0 }, 0x22 },
|
|
{ { 0, METEOR_PIXTYPE_RGB, 2, { 0xf800, 0x07e0, 0x001f }, 1,0 }, 0x22 },
|
|
|
|
{ { 0, METEOR_PIXTYPE_RGB, 3, { 0xff0000,0x00ff00,0x0000ff }, 1,0 }, 0x11 },
|
|
|
|
{ { 0, METEOR_PIXTYPE_RGB, 4, { 0xff0000,0x00ff00,0x0000ff }, 0,0 }, 0x00 },
|
|
{ { 0, METEOR_PIXTYPE_RGB, 4, { 0xff0000,0x00ff00,0x0000ff }, 0,1 }, 0x00 },
|
|
{ { 0, METEOR_PIXTYPE_RGB, 4, { 0xff0000,0x00ff00,0x0000ff }, 1,0 }, 0x00 },
|
|
{ { 0, METEOR_PIXTYPE_RGB, 4, { 0xff0000,0x00ff00,0x0000ff }, 1,1 }, 0x00 },
|
|
{ { 0, METEOR_PIXTYPE_YUV, 2, { 0xff0000,0x00ff00,0x0000ff }, 1,1 }, 0x88 },
|
|
{ { 0, METEOR_PIXTYPE_YUV_PACKED, 2, { 0xff0000,0x00ff00,0x0000ff }, 0,1 }, 0x44 },
|
|
|
|
};
|
|
#define PIXFMT_TABLE_SIZE ( sizeof(pixfmt_table) / sizeof(pixfmt_table[0]) )
|
|
|
|
/*
|
|
* Table of Meteor-supported Pixel Formats (for SETGEO compatibility)
|
|
*/
|
|
|
|
/* FIXME: Also add YUV_422 and YUV_PACKED as well */
|
|
static struct {
|
|
u_long meteor_format;
|
|
struct meteor_pixfmt public;
|
|
} meteor_pixfmt_table[] = {
|
|
|
|
/* FIXME: Should byte swap flag be on for this one; negative in drvr? */
|
|
{ METEOR_GEO_YUV_422,
|
|
{ 0, METEOR_PIXTYPE_YUV, 2, { 0xff0000,0x00ff00,0x0000ff }, 1,1 }
|
|
},
|
|
{ METEOR_GEO_YUV_PACKED,
|
|
{ 0, METEOR_PIXTYPE_YUV_PACKED, 2, { 0xff0000,0x00ff00,0x0000ff }, 0,1 }
|
|
},
|
|
{ METEOR_GEO_RGB16,
|
|
{ 0, METEOR_PIXTYPE_RGB, 2, { 0x7c00, 0x03e0, 0x001f }, 0, 0 }
|
|
},
|
|
{ METEOR_GEO_RGB24,
|
|
{ 0, METEOR_PIXTYPE_RGB, 4, { 0xff0000, 0x00ff00, 0x0000ff }, 0, 0 }
|
|
},
|
|
};
|
|
#define METEOR_PIXFMT_TABLE_SIZE ( sizeof(meteor_pixfmt_table) / \
|
|
sizeof(meteor_pixfmt_table[0]) )
|
|
|
|
|
|
#define BSWAP (BT848_COLOR_CTL_BSWAP_ODD | BT848_COLOR_CTL_BSWAP_EVEN)
|
|
#define WSWAP (BT848_COLOR_CTL_WSWAP_ODD | BT848_COLOR_CTL_WSWAP_EVEN)
|
|
|
|
|
|
/* experimental code for Automatic Frequency Control */
|
|
#define TUNER_AFC
|
|
#define TEST_TUNER_AFC_NOT
|
|
|
|
#if defined( TUNER_AFC )
|
|
#define AFC_DELAY 10000 /* 10 millisend delay */
|
|
#define AFC_BITS 0x07
|
|
#define AFC_FREQ_MINUS_125 0x00
|
|
#define AFC_FREQ_MINUS_62 0x01
|
|
#define AFC_FREQ_CENTERED 0x02
|
|
#define AFC_FREQ_PLUS_62 0x03
|
|
#define AFC_FREQ_PLUS_125 0x04
|
|
#define AFC_MAX_STEP (5 * FREQFACTOR) /* no more than 5 MHz */
|
|
#endif /* TUNER_AFC */
|
|
|
|
/*
|
|
* i2c things:
|
|
*/
|
|
|
|
#define TEST_PAL
|
|
|
|
/* PLL on a Temic NTSC tuner: 4032FY5 */
|
|
#define TEMIC_NTSC_WADDR 0xc0
|
|
#define TEMIC_NTSC_RADDR 0xc1
|
|
|
|
/* PLL on a Temic PAL I tuner: 4062FY5 */
|
|
#define TEMIC_PALI_WADDR 0xc2
|
|
#define TEMIC_PALI_RADDR 0xc3
|
|
|
|
/* PLL on a Philips tuner */
|
|
#define PHILIPS_NTSC_WADDR 0xc6
|
|
#define PHILIPS_NTSC_RADDR 0xc7
|
|
|
|
/* guaranteed address for any TSA5522/3 (PLL on all(?) tuners) */
|
|
#define TSA552x_WADDR 0xc2
|
|
#define TSA552x_RADDR 0xc3
|
|
|
|
#define TSA552x_CB_MSB (0x80)
|
|
#define TSA552x_CB_CP (1<<6)
|
|
#define TSA552x_CB_T2 (1<<5)
|
|
#define TSA552x_CB_T1 (1<<4)
|
|
#define TSA552x_CB_T0 (1<<3)
|
|
#define TSA552x_CB_RSA (1<<2)
|
|
#define TSA552x_CB_RSB (1<<1)
|
|
#define TSA552x_CB_OS (1<<0)
|
|
|
|
|
|
/* address of BTSC/SAP decoder chip */
|
|
#define TDA9850_WADDR 0xb6
|
|
#define TDA9850_RADDR 0xb7
|
|
|
|
|
|
/* EEProm (128 * 8) on an STB card */
|
|
#define X24C01_WADDR 0xae
|
|
#define X24C01_RADDR 0xaf
|
|
|
|
|
|
/* EEProm (256 * 8) on a Hauppauge card */
|
|
#define PFC8582_WADDR 0xa0
|
|
#define PFC8582_RADDR 0xa1
|
|
|
|
|
|
/* registers in the BTSC/dbx chip */
|
|
#define CON1ADDR 0x04
|
|
#define CON2ADDR 0x05
|
|
#define CON3ADDR 0x06
|
|
#define CON4ADDR 0x07
|
|
|
|
|
|
/* raise the charge pump voltage for fast tuning */
|
|
#define TSA552x_FCONTROL (TSA552x_CB_MSB | \
|
|
TSA552x_CB_CP | \
|
|
TSA552x_CB_T0 | \
|
|
TSA552x_CB_RSA | \
|
|
TSA552x_CB_RSB)
|
|
|
|
/* lower the charge pump voltage for better residual oscillator FM */
|
|
#define TSA552x_SCONTROL (TSA552x_CB_MSB | \
|
|
TSA552x_CB_T0 | \
|
|
TSA552x_CB_RSA | \
|
|
TSA552x_CB_RSB)
|
|
|
|
/* sync detect threshold */
|
|
#if 0
|
|
#define SYNC_LEVEL (BT848_ADC_RESERVED | \
|
|
BT848_ADC_CRUSH) /* threshold ~125 mV */
|
|
#else
|
|
#define SYNC_LEVEL (BT848_ADC_RESERVED | \
|
|
BT848_ADC_SYNC_T) /* threshold ~75 mV */
|
|
#endif
|
|
|
|
|
|
/* the GPIO bits that control the audio MUXes */
|
|
#define GPIO_AUDIOMUX_BITS 0x07
|
|
|
|
|
|
/* debug utility for holding previous INT_STAT contents */
|
|
#define STATUS_SUM
|
|
static u_long status_sum = 0;
|
|
|
|
/*
|
|
* defines to make certain bit-fiddles understandable
|
|
*/
|
|
#define FIFO_ENABLED BT848_DMA_CTL_FIFO_EN
|
|
#define RISC_ENABLED BT848_DMA_CTL_RISC_EN
|
|
#define FIFO_RISC_ENABLED (BT848_DMA_CTL_FIFO_EN | BT848_DMA_CTL_RISC_EN)
|
|
#define FIFO_RISC_DISABLED 0
|
|
|
|
#define ALL_INTS_DISABLED 0
|
|
#define ALL_INTS_CLEARED 0xffffffff
|
|
#define CAPTURE_OFF 0
|
|
|
|
#define BIT_SEVEN_HIGH (1<<7)
|
|
#define BIT_EIGHT_HIGH (1<<8)
|
|
|
|
#define I2C_BITS (BT848_INT_RACK | BT848_INT_I2CDONE)
|
|
|
|
|
|
/*
|
|
* misc. support routines.
|
|
*/
|
|
static const struct CARDTYPE cards[];
|
|
static const struct TUNER tuners[];
|
|
static int signCard( bktr_ptr_t bktr, int offset,
|
|
int count, u_char* sig );
|
|
static void probeCard( bktr_ptr_t bktr, int verbose );
|
|
|
|
static vm_offset_t get_bktr_mem( int unit, unsigned size );
|
|
|
|
static int oformat_meteor_to_bt( u_long format );
|
|
|
|
static u_int pixfmt_swap_flags( int pixfmt );
|
|
|
|
/*
|
|
* bt848 RISC programming routines.
|
|
*/
|
|
#ifdef BT848_DUMP
|
|
static int dump_bt848( bt848_ptr_t bt848 );
|
|
#endif
|
|
|
|
static void yuvpack_prog( bktr_ptr_t bktr, char i_flag, int cols,
|
|
int rows, int interlace );
|
|
static void yuv422_prog( bktr_ptr_t bktr, char i_flag, int cols,
|
|
int rows, int interlace );
|
|
static void rgb_prog( bktr_ptr_t bktr, char i_flag, int cols,
|
|
int rows, int interlace );
|
|
static void build_dma_prog( bktr_ptr_t bktr, char i_flag );
|
|
|
|
static bool_t getline(bktr_reg_t *, int);
|
|
static bool_t notclipped(bktr_reg_t * , int , int);
|
|
static bool_t split(bktr_reg_t *, volatile u_long **, int, u_long, int,
|
|
volatile u_char ** , int );
|
|
|
|
/*
|
|
* video & video capture specific routines.
|
|
*/
|
|
static int video_open( bktr_ptr_t bktr );
|
|
static int video_close( bktr_ptr_t bktr );
|
|
static int video_ioctl( bktr_ptr_t bktr, int unit,
|
|
int cmd, caddr_t arg, struct proc* pr );
|
|
|
|
static void start_capture( bktr_ptr_t bktr, unsigned type );
|
|
static void set_fps( bktr_ptr_t bktr, u_short fps );
|
|
|
|
|
|
/*
|
|
* tuner specific functions.
|
|
*/
|
|
static int tuner_open( bktr_ptr_t bktr );
|
|
static int tuner_close( bktr_ptr_t bktr );
|
|
static int tuner_ioctl( bktr_ptr_t bktr, int unit,
|
|
int cmd, caddr_t arg, struct proc* pr );
|
|
|
|
static int tv_channel( bktr_ptr_t bktr, int channel );
|
|
static int tv_freq( bktr_ptr_t bktr, int frequency );
|
|
#if defined( TUNER_AFC )
|
|
static int do_afc( bktr_ptr_t bktr, int addr, int frequency );
|
|
#endif /* TUNER_AFC */
|
|
|
|
|
|
/*
|
|
* audio specific functions.
|
|
*/
|
|
static int set_audio( bktr_ptr_t bktr, int mode );
|
|
static void temp_mute( bktr_ptr_t bktr, int flag );
|
|
static int set_BTSC( bktr_ptr_t bktr, int control );
|
|
|
|
|
|
/*
|
|
* ioctls common to both video & tuner.
|
|
*/
|
|
static int common_ioctl( bktr_ptr_t bktr, bt848_ptr_t bt848,
|
|
int cmd, caddr_t arg );
|
|
|
|
|
|
/*
|
|
* i2c primitives
|
|
*/
|
|
static int i2cWrite( bktr_ptr_t bktr, int addr, int byte1, int byte2 );
|
|
static int i2cRead( bktr_ptr_t bktr, int addr );
|
|
static int writeEEProm( bktr_ptr_t bktr, int offset, int count,
|
|
u_char* data );
|
|
static int readEEProm( bktr_ptr_t bktr, int offset, int count,
|
|
u_char* data );
|
|
|
|
|
|
#ifdef __FreeBSD__
|
|
/*
|
|
* the boot time probe routine.
|
|
*/
|
|
static char*
|
|
bktr_probe( pcici_t tag, pcidi_t type )
|
|
{
|
|
switch (type) {
|
|
case BROOKTREE_848_ID:
|
|
return("BrookTree 848");
|
|
};
|
|
|
|
return ((char *)0);
|
|
}
|
|
#endif /* __FreeBSD__ */
|
|
|
|
|
|
|
|
|
|
/*
|
|
* the attach routine.
|
|
*/
|
|
static void
|
|
bktr_attach( ATTACH_ARGS )
|
|
{
|
|
bktr_ptr_t bktr;
|
|
bt848_ptr_t bt848;
|
|
#ifdef BROOKTREE_IRQ
|
|
u_long old_irq, new_irq;
|
|
#endif
|
|
vm_offset_t buf;
|
|
u_long latency;
|
|
u_long fun;
|
|
|
|
|
|
#ifdef __FreeBSD__
|
|
bktr = &brooktree[unit];
|
|
|
|
if (unit >= NBKTR) {
|
|
printf("brooktree%d: attach: only %d units configured.\n",
|
|
unit, NBKTR);
|
|
printf("brooktree%d: attach: invalid unit number.\n", unit);
|
|
return;
|
|
}
|
|
|
|
bktr->tag = tag;
|
|
pci_map_mem( tag, PCI_MAP_REG_START, (vm_offset_t *) &bktr->base,
|
|
&bktr->phys_base );
|
|
|
|
|
|
#ifdef BROOKTREE_IRQ /* from the configuration file */
|
|
old_irq = pci_conf_read(tag, PCI_INTERRUPT_REG);
|
|
pci_conf_write(tag, PCI_INTERRUPT_REG, BROOKTREE_IRQ);
|
|
new_irq = pci_conf_read(tag, PCI_INTERRUPT_REG);
|
|
printf("bktr%d: attach: irq changed from %d to %d\n",
|
|
unit, (old_irq & 0xff), (new_irq & 0xff));
|
|
#endif
|
|
/* setup the interrupt handling routine */
|
|
pci_map_int(tag, bktr_intr, (void*) bktr, &net_imask);
|
|
#endif /* __FreeBSD__ */
|
|
|
|
#ifdef __bsdi__
|
|
struct isa_attach_args * const ia = (struct isa_attach_args *)aux;
|
|
pci_devaddr_t *tag = (pci_devaddr_t *) ia->ia_aux;
|
|
int unit = bktr->bktr_dev.dv_unit;
|
|
|
|
bktr = (bktr_reg_t *) self;
|
|
bktr->base = (bt848_ptr_t) bktr_res.pci_vaddr;
|
|
isa_establish(&bktr->bktr_id, &bktr->bktr_dev);
|
|
bktr->bktr_ih.ih_fun = bktr_intr_returning_1;
|
|
bktr->bktr_ih.ih_arg = (void *)bktr;
|
|
intr_establish(ia->ia_irq, &bktr->bktr_ih, DV_DULL);
|
|
#endif /* __bsdi__ */
|
|
|
|
/*
|
|
* PCI latency timer. 32 is a good value for 4 bus mastering slots, if
|
|
* you have more than four, then 16 would probably be a better value.
|
|
*/
|
|
#ifndef BROOKTREE_DEF_LATENCY_VALUE
|
|
#define BROOKTREE_DEF_LATENCY_VALUE 10
|
|
#endif
|
|
latency = pci_conf_read(tag, PCI_LATENCY_TIMER);
|
|
latency = (latency >> 8) & 0xff;
|
|
if ( bootverbose ) {
|
|
if (latency)
|
|
printf("brooktree%d: PCI bus latency is", unit);
|
|
else
|
|
printf("brooktree%d: PCI bus latency was 0 changing to",
|
|
unit);
|
|
}
|
|
if ( !latency ) {
|
|
latency = BROOKTREE_DEF_LATENCY_VALUE;
|
|
pci_conf_write(tag, PCI_LATENCY_TIMER, latency<<8);
|
|
}
|
|
if ( bootverbose ) {
|
|
printf(" %d.\n", (int) latency);
|
|
}
|
|
|
|
|
|
/* allocate space for dma program */
|
|
bktr->dma_prog = get_bktr_mem(unit, DMA_PROG_ALLOC);
|
|
bktr->odd_dma_prog = get_bktr_mem(unit, DMA_PROG_ALLOC);
|
|
|
|
/* allocate space for pixel buffer */
|
|
if ( BROOKTREE_ALLOC )
|
|
buf = get_bktr_mem(unit, BROOKTREE_ALLOC);
|
|
else
|
|
buf = 0;
|
|
|
|
if ( bootverbose ) {
|
|
printf("bktr%d: buffer size %d, addr 0x%x\n",
|
|
unit, BROOKTREE_ALLOC, vtophys(buf));
|
|
}
|
|
|
|
bktr->bigbuf = buf;
|
|
bktr->alloc_pages = BROOKTREE_ALLOC_PAGES;
|
|
if ( buf != 0 ) {
|
|
bzero((caddr_t) buf, BROOKTREE_ALLOC);
|
|
buf = vtophys(buf);
|
|
bktr->flags = METEOR_INITALIZED | METEOR_AUTOMODE |
|
|
METEOR_DEV0 | METEOR_RGB16;
|
|
bktr->dma_prog_loaded = FALSE;
|
|
bktr->cols = 640;
|
|
bktr->rows = 480;
|
|
bktr->frames = 1; /* one frame */
|
|
bktr->format = METEOR_GEO_RGB16;
|
|
bktr->pixfmt = oformat_meteor_to_bt( bktr->format );
|
|
bktr->pixfmt_compat = TRUE;
|
|
bt848 = bktr->base;
|
|
bt848->int_mask = ALL_INTS_DISABLED;
|
|
bt848->gpio_dma_ctl = FIFO_RISC_DISABLED;
|
|
}
|
|
|
|
/* defaults for the tuner section of the card */
|
|
bktr->tflags = TUNER_INITALIZED;
|
|
bktr->tuner.frequency = 0;
|
|
bktr->tuner.channel = 0;
|
|
bktr->tuner.chnlset = DEFAULT_CHNLSET;
|
|
bktr->audio_mux_select = 0;
|
|
bktr->audio_mute_state = FALSE;
|
|
|
|
probeCard( bktr, TRUE );
|
|
|
|
#ifdef DEVFS
|
|
bktr->devfs_token = devfs_add_devswf(&bktr_cdevsw, unit,
|
|
DV_CHR, 0, 0, 0644, "brooktree");
|
|
#endif /* DEVFS */
|
|
fun = pci_conf_read(tag, PCI_COMMAND_STATUS_REG);
|
|
pci_conf_write(tag, PCI_COMMAND_STATUS_REG, fun | 4);
|
|
|
|
}
|
|
|
|
|
|
/*
|
|
* interrupt handling routine complete bktr_read() if using interrupts.
|
|
*/
|
|
static void
|
|
bktr_intr( void *arg )
|
|
{
|
|
bktr_ptr_t bktr;
|
|
bt848_ptr_t bt848;
|
|
u_long bktr_status;
|
|
u_char dstatus;
|
|
|
|
bktr = (bktr_ptr_t) arg;
|
|
bt848 = bktr->base;
|
|
|
|
/*
|
|
* check to see if any interrupts are unmasked on this device. If
|
|
* none are, then we likely got here by way of being on a PCI shared
|
|
* interrupt dispatch list.
|
|
*/
|
|
if (bt848->int_mask == ALL_INTS_DISABLED)
|
|
return; /* bail out now, before we do something we
|
|
shouldn't */
|
|
|
|
if (!(bktr->flags & METEOR_OPEN)) {
|
|
bt848->gpio_dma_ctl = FIFO_RISC_DISABLED;
|
|
bt848->int_mask = ALL_INTS_DISABLED;
|
|
/* return; ?? */
|
|
}
|
|
|
|
/* record and clear the INTerrupt status bits */
|
|
bktr_status = bt848->int_stat;
|
|
bt848->int_stat = bktr_status & ~I2C_BITS; /* don't touch i2c */
|
|
|
|
/* record and clear the device status register */
|
|
dstatus = bt848->dstatus;
|
|
bt848->dstatus = 0x00;
|
|
|
|
#if defined( STATUS_SUM )
|
|
/* add any new device status or INTerrupt status bits */
|
|
status_sum |= (bktr_status & ~(BT848_INT_RSV0|BT848_INT_RSV1));
|
|
status_sum |= ((dstatus & (BT848_DSTATUS_COF|BT848_DSTATUS_LOF)) << 6);
|
|
#endif /* STATUS_SUM */
|
|
/* printf( " STATUS %x %x %x \n",
|
|
dstatus, bktr_status, bt848->risc_count );
|
|
*/
|
|
/* if risc was disabled re-start process again */
|
|
if ( !(bktr_status & BT848_INT_RISC_EN) ||
|
|
((bktr_status & (BT848_INT_FBUS |
|
|
BT848_INT_FTRGT |
|
|
BT848_INT_FDSR |
|
|
BT848_INT_PPERR |
|
|
BT848_INT_RIPERR |
|
|
BT848_INT_PABORT |
|
|
BT848_INT_OCERR |
|
|
BT848_INT_SCERR)) != 0) ) {
|
|
|
|
bt848->gpio_dma_ctl = FIFO_RISC_DISABLED;
|
|
|
|
bt848->int_mask = ALL_INTS_DISABLED;
|
|
|
|
bt848->risc_strt_add = vtophys(bktr->dma_prog);
|
|
|
|
bt848->gpio_dma_ctl = FIFO_ENABLED;
|
|
bt848->gpio_dma_ctl = bktr->capcontrol;
|
|
|
|
bt848->int_mask = BT848_INT_MYSTERYBIT |
|
|
BT848_INT_RISCI |
|
|
BT848_INT_VSYNC |
|
|
BT848_INT_FMTCHG;
|
|
|
|
bt848->cap_ctl = bktr->bktr_cap_ctl;
|
|
|
|
return;
|
|
}
|
|
|
|
if (!(bktr_status & BT848_INT_RISCI))
|
|
return;
|
|
/**
|
|
printf( "intr status %x %x %x\n",
|
|
bktr_status, dstatus, bt848->risc_count );
|
|
*/
|
|
|
|
/*
|
|
* Disable future interrupts if a capture mode is not selected.
|
|
* This can happen when we are in the process of closing or
|
|
* changing capture modes, otherwise it shouldn't happen.
|
|
*/
|
|
if (!(bktr->flags & METEOR_CAP_MASK))
|
|
bt848->cap_ctl = CAPTURE_OFF;
|
|
|
|
/*
|
|
* Register the completed field
|
|
*/
|
|
if ( bktr_status & BT848_INT_FIELD )
|
|
bktr->flags &= ~METEOR_WANT_EVEN;
|
|
else
|
|
bktr->flags &= ~METEOR_WANT_ODD;
|
|
|
|
/*
|
|
* If we have a complete frame.
|
|
*/
|
|
if (!(bktr->flags & METEOR_WANT_MASK)) {
|
|
bktr->frames_captured++;
|
|
/*
|
|
* post the completion time.
|
|
*/
|
|
if (bktr->flags & METEOR_WANT_TS) {
|
|
struct timeval *ts;
|
|
|
|
if ((u_int) bktr->alloc_pages * PAGE_SIZE
|
|
<= (bktr->frame_size + sizeof(struct timeval))) {
|
|
ts =(struct timeval *)bktr->bigbuf +
|
|
bktr->frame_size;
|
|
/* doesn't work in synch mode except
|
|
* for first frame */
|
|
/* XXX */
|
|
microtime(ts);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Wake up the user in single capture mode.
|
|
*/
|
|
if (bktr->flags & METEOR_SINGLE) {
|
|
|
|
/* stop dma */
|
|
bt848->int_mask = ALL_INTS_DISABLED;
|
|
|
|
/* disable risc, leave fifo running */
|
|
bt848->gpio_dma_ctl = FIFO_ENABLED;
|
|
wakeup((caddr_t)bktr);
|
|
}
|
|
|
|
/*
|
|
* If the user requested to be notified via signal,
|
|
* let them know the frame is complete.
|
|
*/
|
|
if (bktr->proc && !(bktr->signal & METEOR_SIG_MODE_MASK))
|
|
psignal( bktr->proc,
|
|
bktr->signal&(~METEOR_SIG_MODE_MASK) );
|
|
|
|
/*
|
|
* Reset the want flags if in continuous or
|
|
* synchronous capture mode.
|
|
*/
|
|
/*
|
|
* XXX NOTE (Luigi):
|
|
* currently we only support 3 capture modes: odd only, even only,
|
|
* odd+even interlaced (odd field first). A fourth mode (non interlaced,
|
|
* either even OR odd) could provide 60 (50 for PAL) pictures per
|
|
* second, but it would require this routine to toggle the desired frame
|
|
* each time, and one more different DMA program for the Bt848.
|
|
* As a consequence, this fourth mode is currently unsupported.
|
|
*/
|
|
|
|
if (bktr->flags & (METEOR_CONTIN | METEOR_SYNCAP)) {
|
|
switch(bktr->flags & METEOR_ONLY_FIELDS_MASK) {
|
|
case METEOR_ONLY_ODD_FIELDS:
|
|
bktr->flags |= METEOR_WANT_ODD;
|
|
break;
|
|
case METEOR_ONLY_EVEN_FIELDS:
|
|
bktr->flags |= METEOR_WANT_EVEN;
|
|
break;
|
|
default:
|
|
bktr->flags |= METEOR_WANT_MASK;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
/*---------------------------------------------------------
|
|
**
|
|
** BrookTree 848 character device driver routines
|
|
**
|
|
**---------------------------------------------------------
|
|
*/
|
|
|
|
|
|
#define VIDEO_DEV 0x00
|
|
#define TUNER_DEV 0x01
|
|
|
|
/*
|
|
*
|
|
*/
|
|
int
|
|
bktr_open( dev_t dev, int flags, int fmt, struct proc *p )
|
|
{
|
|
bktr_ptr_t bktr;
|
|
int unit;
|
|
|
|
unit = UNIT( minor(dev) );
|
|
if (unit >= NBKTR) /* unit out of range */
|
|
return( ENXIO );
|
|
|
|
bktr = &(brooktree[ unit ]);
|
|
|
|
if (!(bktr->flags & METEOR_INITALIZED)) /* device not found */
|
|
return( ENXIO );
|
|
|
|
switch ( MINOR( minor(dev) ) ) {
|
|
case VIDEO_DEV:
|
|
return( video_open( bktr ) );
|
|
|
|
case TUNER_DEV:
|
|
return( tuner_open( bktr ) );
|
|
}
|
|
|
|
return( ENXIO );
|
|
}
|
|
|
|
|
|
/*
|
|
*
|
|
*/
|
|
static int
|
|
video_open( bktr_ptr_t bktr )
|
|
{
|
|
bt848_ptr_t bt848;
|
|
|
|
if (bktr->flags & METEOR_OPEN) /* device is busy */
|
|
return( EBUSY );
|
|
|
|
bktr->flags |= METEOR_OPEN;
|
|
|
|
bt848 = bktr->base;
|
|
|
|
#ifdef BT848_DUMP
|
|
dump_bt848( bt848 );
|
|
#endif
|
|
|
|
bt848->dstatus = 0x00; /* clear device status reg. */
|
|
|
|
bt848->adc = SYNC_LEVEL;
|
|
|
|
bt848->iform = BT848_IFORM_M_MUX1 |
|
|
BT848_IFORM_X_XT0 |
|
|
BT848_IFORM_F_NTSCM;
|
|
bktr->flags = (bktr->flags & ~METEOR_DEV_MASK) | METEOR_DEV0;
|
|
bktr->format_params = FORMAT_PARAMS_NTSC525;
|
|
|
|
bktr->max_clip_node = 0;
|
|
|
|
bt848->color_ctl_gamma = 0;
|
|
bt848->color_ctl_rgb_ded = 1;
|
|
bt848->color_ctl_color_bars = 0;
|
|
bt848->color_ctl_ext_frmrate = 0;
|
|
bt848->color_ctl_swap = 0;
|
|
|
|
bt848->e_hscale_lo = 170;
|
|
bt848->o_hscale_lo = 170;
|
|
|
|
bt848->e_delay_lo = 0x72;
|
|
bt848->o_delay_lo = 0x72;
|
|
bt848->e_scloop = 0;
|
|
bt848->o_scloop = 0;
|
|
|
|
bt848->vbi_pack_size = 0;
|
|
bt848->vbi_pack_del = 0;
|
|
|
|
bktr->fifo_errors = 0;
|
|
bktr->dma_errors = 0;
|
|
bktr->frames_captured = 0;
|
|
bktr->even_fields_captured = 0;
|
|
bktr->odd_fields_captured = 0;
|
|
bktr->proc = (struct proc *)0;
|
|
set_fps(bktr, 30);
|
|
bktr->video.addr = 0;
|
|
bktr->video.width = 0;
|
|
bktr->video.banksize = 0;
|
|
bktr->video.ramsize = 0;
|
|
bktr->pixfmt_compat = TRUE;
|
|
bktr->format = METEOR_GEO_RGB16;
|
|
bktr->pixfmt = oformat_meteor_to_bt( bktr->format );
|
|
|
|
|
|
bt848->int_mask = BT848_INT_MYSTERYBIT; /* what does this bit do ??? */
|
|
|
|
return( 0 );
|
|
}
|
|
|
|
|
|
/*
|
|
*
|
|
*/
|
|
static int
|
|
tuner_open( bktr_ptr_t bktr )
|
|
{
|
|
if ( !(bktr->tflags & TUNER_INITALIZED) ) /* device not found */
|
|
return( ENXIO );
|
|
|
|
if ( bktr->tflags & TUNER_OPEN ) /* already open */
|
|
return( 0 );
|
|
|
|
bktr->tflags |= TUNER_OPEN;
|
|
|
|
/* enable drivers on the GPIO port that control the MUXes */
|
|
bktr->base->gpio_out_en = GPIO_AUDIOMUX_BITS;
|
|
|
|
/* unmure the audio stream */
|
|
set_audio( bktr, AUDIO_UNMUTE );
|
|
|
|
/* enable stereo if appropriate */
|
|
if ( bktr->card.dbx )
|
|
set_BTSC( bktr, 0 );
|
|
|
|
return( 0 );
|
|
}
|
|
|
|
|
|
/*
|
|
*
|
|
*/
|
|
int
|
|
bktr_close( dev_t dev, int flags, int fmt, struct proc *p )
|
|
{
|
|
bktr_ptr_t bktr;
|
|
int unit;
|
|
|
|
unit = UNIT( minor(dev) );
|
|
if (unit >= NBKTR) /* unit out of range */
|
|
return( ENXIO );
|
|
|
|
bktr = &(brooktree[ unit ]);
|
|
|
|
switch ( MINOR( minor(dev) ) ) {
|
|
case VIDEO_DEV:
|
|
return( video_close( bktr ) );
|
|
|
|
case TUNER_DEV:
|
|
return( tuner_close( bktr ) );
|
|
}
|
|
|
|
return( ENXIO );
|
|
}
|
|
|
|
|
|
/*
|
|
*
|
|
*/
|
|
static int
|
|
video_close( bktr_ptr_t bktr )
|
|
{
|
|
bt848_ptr_t bt848;
|
|
|
|
bktr->flags &= ~(METEOR_OPEN |
|
|
METEOR_SINGLE |
|
|
METEOR_CAP_MASK |
|
|
METEOR_WANT_MASK);
|
|
|
|
bt848 = bktr->base;
|
|
bt848->gpio_dma_ctl = FIFO_RISC_DISABLED;
|
|
bt848->cap_ctl = CAPTURE_OFF;
|
|
|
|
bktr->dma_prog_loaded = FALSE;
|
|
bt848->tdec = 0;
|
|
bt848->int_mask = ALL_INTS_DISABLED;
|
|
|
|
/** FIXME: is 0xf magic, wouldn't 0x00 work ??? */
|
|
bt848->sreset = 0xf;
|
|
bt848->int_stat = ALL_INTS_CLEARED;
|
|
|
|
return( 0 );
|
|
}
|
|
|
|
|
|
/*
|
|
* tuner close handle,
|
|
* place holder for tuner specific operations on a close.
|
|
*/
|
|
static int
|
|
tuner_close( bktr_ptr_t bktr )
|
|
{
|
|
bktr->tflags &= ~TUNER_OPEN;
|
|
|
|
/* mute the audio by switching the mux */
|
|
set_audio( bktr, AUDIO_MUTE );
|
|
|
|
/* disable drivers on the GPIO port that control the MUXes */
|
|
bktr->base->gpio_out_en = 0;
|
|
|
|
return( 0 );
|
|
}
|
|
|
|
|
|
/*
|
|
*
|
|
*/
|
|
int
|
|
bktr_read( dev_t dev, struct uio *uio, int ioflag )
|
|
{
|
|
bktr_ptr_t bktr;
|
|
bt848_ptr_t bt848;
|
|
int unit;
|
|
int status;
|
|
int count;
|
|
|
|
if (MINOR(minor(dev)) > 0)
|
|
return( ENXIO );
|
|
|
|
unit = UNIT(minor(dev));
|
|
if (unit >= NBKTR) /* unit out of range */
|
|
return( ENXIO );
|
|
|
|
printf("btkr driver : use ioctl interface . read function not implemented \n");
|
|
return( ENXIO );
|
|
|
|
bktr = &(brooktree[unit]);
|
|
if (bktr->bigbuf == 0) /* no frame buffer allocated (ioctl failed) */
|
|
return( ENOMEM );
|
|
|
|
if (bktr->flags & METEOR_CAP_MASK)
|
|
return( EIO ); /* already capturing */
|
|
|
|
count = bktr->rows * bktr->cols *
|
|
pixfmt_table[ bktr->pixfmt ].public.Bpp;
|
|
|
|
if ((int) uio->uio_iov->iov_len < count)
|
|
return( EINVAL );
|
|
|
|
bktr->flags &= ~(METEOR_CAP_MASK | METEOR_WANT_MASK);
|
|
|
|
/* Start capture */
|
|
bt848 = bktr->base;
|
|
bt848->gpio_dma_ctl = FIFO_ENABLED;
|
|
bt848->gpio_dma_ctl = FIFO_RISC_ENABLED;
|
|
|
|
status = tsleep((caddr_t)bktr, BKTRPRI, "captur", 0);
|
|
if (!status) /* successful capture */
|
|
status = uiomove((caddr_t)bktr->bigbuf, count, uio);
|
|
else
|
|
printf ("bktr%d: read: tsleep error %d\n", unit, status);
|
|
|
|
bktr->flags &= ~(METEOR_SINGLE | METEOR_WANT_MASK);
|
|
|
|
return( status );
|
|
}
|
|
|
|
|
|
/*
|
|
*
|
|
*/
|
|
int
|
|
bktr_write( dev_t dev, struct uio *uio, int ioflag )
|
|
{
|
|
return( EINVAL ); /* XXX or ENXIO ? */
|
|
}
|
|
|
|
|
|
/*
|
|
*
|
|
*/
|
|
int
|
|
bktr_ioctl( dev_t dev, ioctl_cmd_t cmd, caddr_t arg, int flag, struct proc* pr )
|
|
{
|
|
bktr_ptr_t bktr;
|
|
int unit;
|
|
|
|
unit = UNIT(minor(dev));
|
|
if (unit >= NBKTR) /* unit out of range */
|
|
return( ENXIO );
|
|
|
|
bktr = &(brooktree[ unit ]);
|
|
|
|
if (bktr->bigbuf == 0) /* no frame buffer allocated (ioctl failed) */
|
|
return( ENOMEM );
|
|
|
|
switch ( MINOR( minor(dev) ) ) {
|
|
case VIDEO_DEV:
|
|
return( video_ioctl( bktr, unit, cmd, arg, pr ) );
|
|
|
|
case TUNER_DEV:
|
|
return( tuner_ioctl( bktr, unit, cmd, arg, pr ) );
|
|
}
|
|
|
|
return( ENXIO );
|
|
}
|
|
|
|
/*
|
|
* video ioctls
|
|
*/
|
|
static int
|
|
video_ioctl( bktr_ptr_t bktr, int unit, int cmd, caddr_t arg, struct proc* pr )
|
|
{
|
|
int tmp_int;
|
|
bt848_ptr_t bt848;
|
|
volatile u_char c_temp;
|
|
unsigned int temp;
|
|
unsigned int error;
|
|
struct meteor_geomet *geo;
|
|
struct meteor_counts *cnt;
|
|
struct meteor_video *video;
|
|
vm_offset_t buf;
|
|
struct format_params *fp;
|
|
int i;
|
|
bt848 = bktr->base;
|
|
|
|
switch ( cmd ) {
|
|
|
|
case BT848SCLIP: /* set clip region */
|
|
bktr->max_clip_node = 0;
|
|
memcpy(&bktr->clip_list, arg, sizeof(bktr->clip_list));
|
|
|
|
for (i = 0; i < BT848_MAX_CLIP_NODE; i++) {
|
|
if (bktr->clip_list[i].y_min == 0 &&
|
|
bktr->clip_list[i].y_max == 0) {
|
|
bktr->max_clip_node = i;
|
|
break;
|
|
}
|
|
}
|
|
/* make sure that the list contains a valid clip secquence */
|
|
/* the clip rectangles should be sorted by x then by y as the
|
|
second order sort key */
|
|
|
|
/* clip rectangle list is terminated by y_min and y_max set to 0 */
|
|
|
|
/* to disable clipping set y_min and y_max to 0 in the first
|
|
clip rectangle . The first clip rectangle is clip_list[0].
|
|
*/
|
|
|
|
|
|
|
|
if (bktr->max_clip_node == 0 &&
|
|
(bktr->clip_list[0].y_min != 0 &&
|
|
bktr->clip_list[0].y_max != 0)) {
|
|
return EINVAL;
|
|
}
|
|
|
|
for (i = 0; i < BT848_MAX_CLIP_NODE - 1 ; i++) {
|
|
if (bktr->clip_list[i].y_min == 0 &&
|
|
bktr->clip_list[i].y_max == 0) {
|
|
break;
|
|
}
|
|
if ( bktr->clip_list[i+1].y_min != 0 &&
|
|
bktr->clip_list[i+1].y_max != 0 &&
|
|
bktr->clip_list[i].x_min > bktr->clip_list[i+1].x_min ) {
|
|
|
|
bktr->max_clip_node = 0;
|
|
return (EINVAL);
|
|
|
|
}
|
|
|
|
if (bktr->clip_list[i].x_min >= bktr->clip_list[i].x_max ||
|
|
bktr->clip_list[i].y_min >= bktr->clip_list[i].y_max ||
|
|
bktr->clip_list[i].x_min < 0 ||
|
|
bktr->clip_list[i].x_max < 0 ||
|
|
bktr->clip_list[i].y_min < 0 ||
|
|
bktr->clip_list[i].y_max < 0 ) {
|
|
bktr->max_clip_node = 0;
|
|
return (EINVAL);
|
|
}
|
|
}
|
|
|
|
bktr->dma_prog_loaded = FALSE;
|
|
|
|
break;
|
|
|
|
case METEORSTATUS: /* get Bt848 status */
|
|
c_temp = bt848->dstatus;
|
|
temp = 0;
|
|
if (!(c_temp & 0x40)) temp |= METEOR_STATUS_HCLK;
|
|
if (!(c_temp & 0x10)) temp |= METEOR_STATUS_FIDT;
|
|
*(u_short *)arg = temp;
|
|
break;
|
|
|
|
case METEORSFMT: /* set input format */
|
|
switch(*(unsigned long *)arg & METEOR_FORM_MASK ) {
|
|
case 0: /* default */
|
|
case METEOR_FMT_NTSC:
|
|
bktr->flags = (bktr->flags & ~METEOR_FORM_MASK) |
|
|
METEOR_NTSC;
|
|
bt848->iform &= ~BT848_IFORM_FORMAT;
|
|
bt848->iform |= BT848_IFORM_F_NTSCM;
|
|
bt848->adelay = 0x68;
|
|
bt848->bdelay = 0x5d;
|
|
bktr->format_params = FORMAT_PARAMS_NTSC525;
|
|
break;
|
|
|
|
case METEOR_FMT_PAL:
|
|
bktr->flags = (bktr->flags & ~METEOR_FORM_MASK) |
|
|
METEOR_PAL;
|
|
bt848->iform &= ~BT848_IFORM_FORMAT;
|
|
bt848->iform |= BT848_IFORM_F_PALBDGHI;
|
|
bt848->adelay = 0x7f;
|
|
bt848->bdelay = 0x72;
|
|
bktr->format_params = FORMAT_PARAMS_PAL625;
|
|
break;
|
|
|
|
case METEOR_FMT_AUTOMODE:
|
|
bktr->flags = (bktr->flags & ~METEOR_FORM_MASK) |
|
|
METEOR_AUTOMODE;
|
|
bt848->iform &= ~BT848_IFORM_FORMAT;
|
|
break;
|
|
|
|
default:
|
|
return( EINVAL );
|
|
}
|
|
break;
|
|
|
|
case METEORGFMT: /* get input format */
|
|
*(u_long *)arg = bktr->flags & METEOR_FORM_MASK;
|
|
break;
|
|
|
|
case METEORSCOUNT: /* (re)set error counts */
|
|
cnt = (struct meteor_counts *) arg;
|
|
bktr->fifo_errors = cnt->fifo_errors;
|
|
bktr->dma_errors = cnt->dma_errors;
|
|
bktr->frames_captured = cnt->frames_captured;
|
|
bktr->even_fields_captured = cnt->even_fields_captured;
|
|
bktr->odd_fields_captured = cnt->odd_fields_captured;
|
|
break;
|
|
|
|
case METEORGCOUNT: /* get error counts */
|
|
cnt = (struct meteor_counts *) arg;
|
|
cnt->fifo_errors = bktr->fifo_errors;
|
|
cnt->dma_errors = bktr->dma_errors;
|
|
cnt->frames_captured = bktr->frames_captured;
|
|
cnt->even_fields_captured = bktr->even_fields_captured;
|
|
cnt->odd_fields_captured = bktr->odd_fields_captured;
|
|
break;
|
|
|
|
case METEORGVIDEO:
|
|
video = (struct meteor_video *)arg;
|
|
video->addr = bktr->video.addr;
|
|
video->width = bktr->video.width;
|
|
video->banksize = bktr->video.banksize;
|
|
video->ramsize = bktr->video.ramsize;
|
|
break;
|
|
|
|
case METEORSVIDEO:
|
|
video = (struct meteor_video *)arg;
|
|
bktr->video.addr = video->addr;
|
|
bktr->video.width = video->width;
|
|
bktr->video.banksize = video->banksize;
|
|
bktr->video.ramsize = video->ramsize;
|
|
break;
|
|
|
|
case METEORSFPS:
|
|
set_fps(bktr, *(u_short *)arg);
|
|
break;
|
|
|
|
case METEORGFPS:
|
|
*(u_short *)arg = bktr->fps;
|
|
break;
|
|
|
|
case METEORSHUE: /* set hue */
|
|
bt848->hue = (*(u_char *) arg) & 0xff;
|
|
break;
|
|
|
|
case METEORGHUE: /* get hue */
|
|
*(u_char *)arg = bt848->hue;
|
|
break;
|
|
|
|
case METEORSBRIG: /* set brightness */
|
|
bt848->bright = *(u_char *)arg & 0xff;
|
|
break;
|
|
|
|
case METEORGBRIG: /* get brightness */
|
|
*(u_char *)arg = bt848->bright;
|
|
break;
|
|
|
|
case METEORSCSAT: /* set chroma saturation */
|
|
temp = (int)*(u_char *)arg;
|
|
|
|
bt848->sat_u_lo = bt848->sat_v_lo = (temp << 1) & 0xff;
|
|
|
|
bt848->e_control &= ~(BT848_E_CONTROL_SAT_U_MSB |
|
|
BT848_E_CONTROL_SAT_V_MSB);
|
|
bt848->o_control &= ~(BT848_O_CONTROL_SAT_U_MSB |
|
|
BT848_O_CONTROL_SAT_V_MSB);
|
|
|
|
if ( temp & BIT_SEVEN_HIGH ) {
|
|
bt848->e_control |= (BT848_E_CONTROL_SAT_U_MSB |
|
|
BT848_E_CONTROL_SAT_V_MSB);
|
|
bt848->o_control |= (BT848_O_CONTROL_SAT_U_MSB |
|
|
BT848_O_CONTROL_SAT_V_MSB);
|
|
}
|
|
break;
|
|
|
|
case METEORGCSAT: /* get chroma saturation */
|
|
temp = (bt848->sat_v_lo >> 1) & 0xff;
|
|
if ( bt848->e_control & BT848_E_CONTROL_SAT_V_MSB )
|
|
temp |= BIT_SEVEN_HIGH;
|
|
*(u_char *)arg = (u_char)temp;
|
|
break;
|
|
|
|
case METEORSCONT: /* set contrast */
|
|
temp = (int)*(u_char *)arg & 0xff;
|
|
temp <<= 1;
|
|
bt848->contrast_lo = temp & 0xff;
|
|
bt848->e_control &= ~BT848_E_CONTROL_CON_MSB;
|
|
bt848->o_control &= ~BT848_O_CONTROL_CON_MSB;
|
|
bt848->e_control |=
|
|
((temp & 0x100) >> 6 ) & BT848_E_CONTROL_CON_MSB;
|
|
bt848->o_control |=
|
|
((temp & 0x100) >> 6 ) & BT848_O_CONTROL_CON_MSB;
|
|
break;
|
|
|
|
case METEORGCONT: /* get contrast */
|
|
temp = (int)bt848->contrast_lo & 0xff;
|
|
temp |= ((int)bt848->o_control & 0x04) << 6;
|
|
*(u_char *)arg = (u_char)((temp >> 1) & 0xff);
|
|
break;
|
|
|
|
case METEORSSIGNAL:
|
|
if(*(int *)arg == 0 || *(int *)arg >= NSIG) {
|
|
return( EINVAL );
|
|
break;
|
|
}
|
|
bktr->signal = *(int *) arg;
|
|
bktr->proc = pr;
|
|
break;
|
|
|
|
case METEORGSIGNAL:
|
|
*(int *)arg = bktr->signal;
|
|
break;
|
|
|
|
case METEORCAPTUR:
|
|
temp = bktr->flags;
|
|
switch (*(int *) arg) {
|
|
case METEOR_CAP_SINGLE:
|
|
|
|
if (bktr->bigbuf==0) /* no frame buffer allocated */
|
|
return( ENOMEM );
|
|
/* already capturing */
|
|
if (temp & METEOR_CAP_MASK)
|
|
return( EIO );
|
|
|
|
|
|
|
|
start_capture(bktr, METEOR_SINGLE);
|
|
|
|
/* wait for capture to complete */
|
|
bt848->int_stat = ALL_INTS_CLEARED;
|
|
bt848->gpio_dma_ctl = FIFO_ENABLED;
|
|
bt848->gpio_dma_ctl = bktr->capcontrol;
|
|
|
|
bt848->int_mask = BT848_INT_MYSTERYBIT |
|
|
BT848_INT_RISCI |
|
|
BT848_INT_VSYNC |
|
|
BT848_INT_FMTCHG;
|
|
|
|
bt848->cap_ctl = bktr->bktr_cap_ctl;
|
|
error = tsleep((caddr_t)bktr, BKTRPRI, "captur", hz);
|
|
if (error && (error != ERESTART)) {
|
|
/* Here if we didn't get complete frame */
|
|
#ifdef DIAGNOSTIC
|
|
printf( "bktr%d: ioctl: tsleep error %d %x\n",
|
|
unit, error, bt848->risc_count);
|
|
#endif
|
|
|
|
/* stop dma */
|
|
bt848->int_mask = ALL_INTS_DISABLED;
|
|
|
|
/* disable risc, leave fifo running */
|
|
bt848->gpio_dma_ctl = FIFO_ENABLED;
|
|
}
|
|
|
|
bktr->flags &= ~(METEOR_SINGLE|METEOR_WANT_MASK);
|
|
/* FIXME: should we set bt848->int_stat ??? */
|
|
break;
|
|
|
|
case METEOR_CAP_CONTINOUS:
|
|
if (bktr->bigbuf==0) /* no frame buffer allocated */
|
|
return( ENOMEM );
|
|
/* already capturing */
|
|
if (temp & METEOR_CAP_MASK)
|
|
return( EIO );
|
|
|
|
|
|
start_capture(bktr, METEOR_CONTIN);
|
|
bt848->int_stat = bt848->int_stat;
|
|
|
|
bt848->gpio_dma_ctl = FIFO_ENABLED;
|
|
bt848->gpio_dma_ctl = bktr->capcontrol;
|
|
bt848->cap_ctl = bktr->bktr_cap_ctl;
|
|
|
|
bt848->int_mask = BT848_INT_MYSTERYBIT |
|
|
BT848_INT_RISCI |
|
|
BT848_INT_VSYNC |
|
|
BT848_INT_FMTCHG;
|
|
#ifdef BT848_DUMP
|
|
dump_bt848( bt848 );
|
|
#endif
|
|
break;
|
|
|
|
case METEOR_CAP_STOP_CONT:
|
|
if (bktr->flags & METEOR_CONTIN) {
|
|
/* turn off capture */
|
|
bt848->gpio_dma_ctl = FIFO_RISC_DISABLED;
|
|
bt848->cap_ctl = CAPTURE_OFF;
|
|
bt848->int_mask = ALL_INTS_DISABLED;
|
|
bktr->flags &=
|
|
~(METEOR_CONTIN | METEOR_WANT_MASK);
|
|
|
|
}
|
|
}
|
|
break;
|
|
|
|
case METEORSETGEO:
|
|
/* can't change parameters while capturing */
|
|
if (bktr->flags & METEOR_CAP_MASK)
|
|
return( EBUSY );
|
|
|
|
|
|
geo = (struct meteor_geomet *) arg;
|
|
fp = &format_params[bktr->format_params];
|
|
|
|
error = 0;
|
|
/* Either even or odd, if even & odd, then these a zero */
|
|
if ((geo->oformat & METEOR_GEO_ODD_ONLY) &&
|
|
(geo->oformat & METEOR_GEO_EVEN_ONLY)) {
|
|
printf( "bktr%d: ioctl: Geometry odd or even only.\n",
|
|
unit);
|
|
return( EINVAL );
|
|
}
|
|
|
|
/* set/clear even/odd flags */
|
|
if (geo->oformat & METEOR_GEO_ODD_ONLY)
|
|
bktr->flags |= METEOR_ONLY_ODD_FIELDS;
|
|
else
|
|
bktr->flags &= ~METEOR_ONLY_ODD_FIELDS;
|
|
if (geo->oformat & METEOR_GEO_EVEN_ONLY)
|
|
bktr->flags |= METEOR_ONLY_EVEN_FIELDS;
|
|
else
|
|
bktr->flags &= ~METEOR_ONLY_EVEN_FIELDS;
|
|
|
|
if ((geo->columns & 0x3fe) != geo->columns) {
|
|
printf(
|
|
"bktr%d: ioctl: %d: columns too large or not even.\n",
|
|
unit, geo->columns);
|
|
error = EINVAL;
|
|
}
|
|
if (((geo->rows & 0x7fe) != geo->rows) ||
|
|
((geo->oformat & METEOR_GEO_FIELD_MASK) &&
|
|
((geo->rows & 0x3fe) != geo->rows)) ) {
|
|
printf(
|
|
"bktr%d: ioctl: %d: rows too large or not even.\n",
|
|
unit, geo->rows);
|
|
error = EINVAL;
|
|
}
|
|
if (geo->frames > 32) {
|
|
printf("bktr%d: ioctl: too many frames.\n", unit);
|
|
|
|
error = EINVAL;
|
|
}
|
|
|
|
if (error)
|
|
return( error );
|
|
|
|
bktr->dma_prog_loaded = FALSE;
|
|
bt848->gpio_dma_ctl = FIFO_RISC_DISABLED;
|
|
|
|
bt848->int_mask = ALL_INTS_DISABLED;
|
|
|
|
if ((temp=(geo->rows * geo->columns * geo->frames * 2))) {
|
|
if (geo->oformat & METEOR_GEO_RGB24) temp = temp * 2;
|
|
|
|
/* meteor_mem structure for SYNC Capture */
|
|
if (geo->frames > 1) temp += PAGE_SIZE;
|
|
|
|
temp = btoc(temp);
|
|
if ((int) temp > bktr->alloc_pages
|
|
&& bktr->video.addr == 0) {
|
|
buf = get_bktr_mem(unit, temp*PAGE_SIZE);
|
|
if (buf != 0) {
|
|
kmem_free(kernel_map, bktr->bigbuf,
|
|
(bktr->alloc_pages * PAGE_SIZE));
|
|
bktr->bigbuf = buf;
|
|
bktr->alloc_pages = temp;
|
|
if (bootverbose)
|
|
printf(
|
|
"bktr%d: ioctl: Allocating %d bytes\n",
|
|
unit, temp*PAGE_SIZE);
|
|
}
|
|
else
|
|
error = ENOMEM;
|
|
}
|
|
}
|
|
|
|
if (error)
|
|
return error;
|
|
|
|
bktr->rows = geo->rows;
|
|
bktr->cols = geo->columns;
|
|
bktr->frames = geo->frames;
|
|
|
|
temp = ((quad_t ) fp->htotal* (quad_t) fp->horizontal * 4096
|
|
/ fp->vertical / bktr->cols) - 4096;
|
|
bt848->e_hscale_lo = temp & 0xff;
|
|
bt848->o_hscale_lo = temp & 0xff;
|
|
bt848->e_hscale_hi = (temp >> 8) & 0xff;
|
|
bt848->o_hscale_hi = (temp >> 8) & 0xff;
|
|
|
|
/* horizontal active */
|
|
temp = bktr->cols;
|
|
bt848->e_hactive_lo = temp & 0xff;
|
|
bt848->o_hactive_lo = temp & 0xff;
|
|
bt848->e_crop &= ~0x3;
|
|
bt848->o_crop &= ~0x3;
|
|
bt848->e_crop |= (temp >> 8) & 0x3;
|
|
bt848->o_crop |= (temp >> 8) & 0x3;
|
|
|
|
/* horizontal delay */
|
|
temp = (fp->hdelay * bktr->cols) / fp->hactive;
|
|
temp = temp + 2; /* why?? - rmt */
|
|
temp = temp & 0x3fe;
|
|
bt848->e_delay_lo = temp & 0xff;
|
|
bt848->o_delay_lo = temp & 0xff;
|
|
bt848->e_crop &= ~0xc;
|
|
bt848->o_crop &= ~0xc;
|
|
bt848->e_crop |= (temp >> 6) & 0xc;
|
|
bt848->o_crop |= (temp >> 6) & 0xc;
|
|
|
|
/* vertical scale */
|
|
if (geo->oformat & METEOR_GEO_ODD_ONLY ||
|
|
geo->oformat & METEOR_GEO_EVEN_ONLY)
|
|
tmp_int = 65536 -
|
|
((fp->vactive * 256 / bktr->rows) - 512);
|
|
else {
|
|
tmp_int = 65536 -
|
|
(((fp->vactive * 512) / bktr->rows) - 512);
|
|
}
|
|
|
|
tmp_int &= 0x1fff;
|
|
|
|
bt848->e_vscale_lo = tmp_int & 0xff;
|
|
bt848->o_vscale_lo = tmp_int & 0xff;
|
|
bt848->e_vscale_hi &= ~0x1f;
|
|
bt848->o_vscale_hi &= ~0x1f;
|
|
bt848->e_vscale_hi |= (tmp_int >> 8) & 0x1f;
|
|
bt848->o_vscale_hi |= (tmp_int >> 8) & 0x1f;
|
|
|
|
/* vertical active */
|
|
bt848->e_crop &= ~0x30;
|
|
bt848->e_crop |= (fp->vactive >> 4) & 0x30;
|
|
bt848->e_vactive_lo = fp->vactive & 0xff;
|
|
bt848->o_crop &= ~0x30;
|
|
bt848->o_crop |= (fp->vactive >> 4) & 0x30;
|
|
bt848->o_vactive_lo = fp->vactive & 0xff;
|
|
|
|
/* vertical delay */
|
|
bt848->e_vdelay_lo = fp->vdelay;
|
|
bt848->o_vdelay_lo = fp->vdelay;
|
|
|
|
/* Pixel format (if in meteor pixfmt compatibility mode) */
|
|
if ( bktr->pixfmt_compat ) {
|
|
bktr->format = METEOR_GEO_YUV_422;
|
|
switch (geo->oformat & METEOR_GEO_OUTPUT_MASK) {
|
|
case 0: /* default */
|
|
case METEOR_GEO_RGB16:
|
|
bktr->format = METEOR_GEO_RGB16;
|
|
break;
|
|
case METEOR_GEO_RGB24:
|
|
bktr->format = METEOR_GEO_RGB24;
|
|
break;
|
|
case METEOR_GEO_YUV_422:
|
|
bktr->format = METEOR_GEO_YUV_422;
|
|
break;
|
|
case METEOR_GEO_YUV_PACKED:
|
|
bktr->format = METEOR_GEO_YUV_PACKED;
|
|
break;
|
|
}
|
|
bktr->pixfmt = oformat_meteor_to_bt( bktr->format );
|
|
}
|
|
|
|
if (bktr->flags & METEOR_CAP_MASK) {
|
|
|
|
if (bktr->flags & (METEOR_CONTIN|METEOR_SYNCAP)) {
|
|
switch(bktr->flags & METEOR_ONLY_FIELDS_MASK) {
|
|
case METEOR_ONLY_ODD_FIELDS:
|
|
bktr->flags |= METEOR_WANT_ODD;
|
|
break;
|
|
case METEOR_ONLY_EVEN_FIELDS:
|
|
bktr->flags |= METEOR_WANT_EVEN;
|
|
break;
|
|
default:
|
|
bktr->flags |= METEOR_WANT_MASK;
|
|
break;
|
|
}
|
|
|
|
start_capture(bktr, METEOR_CONTIN);
|
|
bt848->int_stat = bt848->int_stat;
|
|
bt848->gpio_dma_ctl = FIFO_ENABLED;
|
|
bt848->gpio_dma_ctl = bktr->capcontrol;
|
|
bt848->int_mask = BT848_INT_MYSTERYBIT |
|
|
BT848_INT_VSYNC |
|
|
BT848_INT_FMTCHG;
|
|
}
|
|
}
|
|
break;
|
|
/* end of METEORSETGEO */
|
|
|
|
default:
|
|
return common_ioctl( bktr, bt848, cmd, arg );
|
|
}
|
|
|
|
return( 0 );
|
|
}
|
|
|
|
|
|
/*
|
|
* tuner ioctls
|
|
*/
|
|
static int
|
|
tuner_ioctl( bktr_ptr_t bktr, int unit, int cmd, caddr_t arg, struct proc* pr )
|
|
{
|
|
bt848_ptr_t bt848;
|
|
int tmp_int;
|
|
unsigned int temp, temp1;
|
|
int offset;
|
|
int count;
|
|
u_char *buf;
|
|
|
|
bt848 = bktr->base;
|
|
|
|
switch ( cmd ) {
|
|
|
|
#if defined( TUNER_AFC )
|
|
case TVTUNER_SETAFC:
|
|
bktr->tuner.afc = (*(int *)arg != 0);
|
|
break;
|
|
|
|
case TVTUNER_GETAFC:
|
|
*(int *)arg = bktr->tuner.afc;
|
|
/* XXX Perhaps use another bit to indicate AFC success? */
|
|
break;
|
|
#endif /* TUNER_AFC */
|
|
|
|
case TVTUNER_SETCHNL:
|
|
temp_mute( bktr, TRUE );
|
|
temp = tv_channel( bktr, (int)*(unsigned long *)arg );
|
|
temp_mute( bktr, FALSE );
|
|
if ( temp < 0 )
|
|
return( EINVAL );
|
|
*(unsigned long *)arg = temp;
|
|
break;
|
|
|
|
case TVTUNER_GETCHNL:
|
|
*(unsigned long *)arg = bktr->tuner.channel;
|
|
break;
|
|
|
|
case TVTUNER_SETTYPE:
|
|
temp = *(unsigned long *)arg;
|
|
if ( (temp < CHNLSET_MIN) || (temp > CHNLSET_MAX) )
|
|
return( EINVAL );
|
|
bktr->tuner.chnlset = temp;
|
|
break;
|
|
|
|
case TVTUNER_GETTYPE:
|
|
*(unsigned long *)arg = bktr->tuner.chnlset;
|
|
break;
|
|
|
|
case TVTUNER_GETSTATUS:
|
|
temp = i2cRead( bktr, TSA552x_RADDR );
|
|
*(unsigned long *)arg = temp & 0xff;
|
|
break;
|
|
|
|
case TVTUNER_SETFREQ:
|
|
temp_mute( bktr, TRUE );
|
|
temp = tv_freq( bktr, (int)*(unsigned long *)arg );
|
|
temp_mute( bktr, FALSE );
|
|
if ( temp < 0 )
|
|
return( EINVAL );
|
|
*(unsigned long *)arg = temp;
|
|
break;
|
|
|
|
case TVTUNER_GETFREQ:
|
|
*(unsigned long *)arg = bktr->tuner.frequency;
|
|
break;
|
|
|
|
case BT848_SAUDIO: /* set audio channel */
|
|
if ( set_audio( bktr, *(int*)arg ) < 0 )
|
|
return( EIO );
|
|
break;
|
|
|
|
/* hue is a 2's compliment number, -90' to +89.3' in 0.7' steps */
|
|
case BT848_SHUE: /* set hue */
|
|
bt848->hue = (u_char)(*(int*)arg & 0xff);
|
|
break;
|
|
|
|
case BT848_GHUE: /* get hue */
|
|
*(int*)arg = (signed char)(bt848->hue & 0xff);
|
|
break;
|
|
|
|
/* brightness is a 2's compliment #, -50 to +%49.6% in 0.39% steps */
|
|
case BT848_SBRIG: /* set brightness */
|
|
bt848->bright = (u_char)(*(int *)arg & 0xff);
|
|
break;
|
|
|
|
case BT848_GBRIG: /* get brightness */
|
|
*(int *)arg = (signed char)(bt848->bright & 0xff);
|
|
break;
|
|
|
|
/* */
|
|
case BT848_SCSAT: /* set chroma saturation */
|
|
tmp_int = *(int*)arg;
|
|
|
|
temp = bt848->e_control;
|
|
temp1 = bt848->o_control;
|
|
if ( tmp_int & BIT_EIGHT_HIGH ) {
|
|
temp |= (BT848_E_CONTROL_SAT_U_MSB |
|
|
BT848_E_CONTROL_SAT_V_MSB);
|
|
temp1 |= (BT848_O_CONTROL_SAT_U_MSB |
|
|
BT848_O_CONTROL_SAT_V_MSB);
|
|
}
|
|
else {
|
|
temp &= ~(BT848_E_CONTROL_SAT_U_MSB |
|
|
BT848_E_CONTROL_SAT_V_MSB);
|
|
temp1 &= ~(BT848_O_CONTROL_SAT_U_MSB |
|
|
BT848_O_CONTROL_SAT_V_MSB);
|
|
}
|
|
|
|
bt848->sat_u_lo = (u_char)(tmp_int & 0xff);
|
|
bt848->sat_v_lo = (u_char)(tmp_int & 0xff);
|
|
bt848->e_control = temp;
|
|
bt848->o_control = temp1;
|
|
break;
|
|
|
|
case BT848_GCSAT: /* get chroma saturation */
|
|
tmp_int = (int)(bt848->sat_v_lo & 0xff);
|
|
if ( bt848->e_control & BT848_E_CONTROL_SAT_V_MSB )
|
|
tmp_int |= BIT_EIGHT_HIGH;
|
|
*(int*)arg = tmp_int;
|
|
break;
|
|
|
|
/* */
|
|
case BT848_SVSAT: /* set chroma V saturation */
|
|
tmp_int = *(int*)arg;
|
|
|
|
temp = bt848->e_control;
|
|
temp1 = bt848->o_control;
|
|
if ( tmp_int & BIT_EIGHT_HIGH) {
|
|
temp |= BT848_E_CONTROL_SAT_V_MSB;
|
|
temp1 |= BT848_O_CONTROL_SAT_V_MSB;
|
|
}
|
|
else {
|
|
temp &= ~BT848_E_CONTROL_SAT_V_MSB;
|
|
temp1 &= ~BT848_O_CONTROL_SAT_V_MSB;
|
|
}
|
|
|
|
bt848->sat_v_lo = (u_char)(tmp_int & 0xff);
|
|
bt848->e_control = temp;
|
|
bt848->o_control = temp1;
|
|
break;
|
|
|
|
case BT848_GVSAT: /* get chroma V saturation */
|
|
tmp_int = (int)bt848->sat_v_lo & 0xff;
|
|
if ( bt848->e_control & BT848_E_CONTROL_SAT_V_MSB )
|
|
tmp_int |= BIT_EIGHT_HIGH;
|
|
*(int*)arg = tmp_int;
|
|
break;
|
|
|
|
/* */
|
|
case BT848_SUSAT: /* set chroma U saturation */
|
|
tmp_int = *(int*)arg;
|
|
|
|
temp = bt848->e_control;
|
|
temp1 = bt848->o_control;
|
|
if ( tmp_int & BIT_EIGHT_HIGH ) {
|
|
temp |= BT848_E_CONTROL_SAT_U_MSB;
|
|
temp1 |= BT848_O_CONTROL_SAT_U_MSB;
|
|
}
|
|
else {
|
|
temp &= ~BT848_E_CONTROL_SAT_U_MSB;
|
|
temp1 &= ~BT848_O_CONTROL_SAT_U_MSB;
|
|
}
|
|
|
|
bt848->sat_u_lo = (u_char)(tmp_int & 0xff);
|
|
bt848->e_control = temp;
|
|
bt848->o_control = temp1;
|
|
break;
|
|
|
|
case BT848_GUSAT: /* get chroma U saturation */
|
|
tmp_int = (int)bt848->sat_u_lo & 0xff;
|
|
if ( bt848->e_control & BT848_E_CONTROL_SAT_U_MSB )
|
|
tmp_int |= BIT_EIGHT_HIGH;
|
|
*(int*)arg = tmp_int;
|
|
break;
|
|
|
|
/* lr 970528 luma notch etc - 3 high bits of e_control/o_control */
|
|
|
|
case BT848_SLNOTCH: /* set luma notch */
|
|
tmp_int = (*(int *)arg & 0x7) << 5 ;
|
|
bt848->e_control &= ~0xe0 ;
|
|
bt848->o_control &= ~0xe0 ;
|
|
bt848->e_control |= tmp_int ;
|
|
bt848->o_control |= tmp_int ;
|
|
break;
|
|
|
|
case BT848_GLNOTCH: /* get luma notch */
|
|
*(int *)arg = (int) ( (bt848->e_control & 0xe0) >> 5) ;
|
|
break;
|
|
|
|
|
|
/* */
|
|
case BT848_SCONT: /* set contrast */
|
|
tmp_int = *(int*)arg;
|
|
|
|
temp = bt848->e_control;
|
|
temp1 = bt848->o_control;
|
|
if ( tmp_int & BIT_EIGHT_HIGH ) {
|
|
temp |= BT848_E_CONTROL_CON_MSB;
|
|
temp1 |= BT848_O_CONTROL_CON_MSB;
|
|
}
|
|
else {
|
|
temp &= ~BT848_E_CONTROL_CON_MSB;
|
|
temp1 &= ~BT848_O_CONTROL_CON_MSB;
|
|
}
|
|
|
|
bt848->contrast_lo = (u_char)(tmp_int & 0xff);
|
|
bt848->e_control = temp;
|
|
bt848->o_control = temp1;
|
|
break;
|
|
|
|
case BT848_GCONT: /* get contrast */
|
|
tmp_int = (int)bt848->contrast_lo & 0xff;
|
|
if ( bt848->e_control & BT848_E_CONTROL_CON_MSB )
|
|
tmp_int |= BIT_EIGHT_HIGH;
|
|
*(int*)arg = tmp_int;
|
|
break;
|
|
|
|
/* FIXME: SCBARS and CCBARS require a valid int * */
|
|
/* argument to succeed, but its not used; consider */
|
|
/* using the arg to store the on/off state so */
|
|
/* there's only one ioctl() needed to turn cbars on/off */
|
|
case BT848_SCBARS: /* set colorbar output */
|
|
bt848->color_ctl_color_bars = 1;
|
|
break;
|
|
|
|
case BT848_CCBARS: /* clear colorbar output */
|
|
bt848->color_ctl_color_bars = 0;
|
|
break;
|
|
|
|
case BT848_GAUDIO: /* get audio channel */
|
|
temp = bktr->audio_mux_select;
|
|
if ( bktr->audio_mute_state == TRUE )
|
|
temp |= AUDIO_MUTE;
|
|
*(int*)arg = temp;
|
|
break;
|
|
|
|
case BT848_SBTSC: /* set audio channel */
|
|
if ( set_BTSC( bktr, *(int*)arg ) < 0 )
|
|
return( EIO );
|
|
break;
|
|
|
|
case BT848_WEEPROM: /* write eeprom */
|
|
offset = (((struct eeProm *)arg)->offset);
|
|
count = (((struct eeProm *)arg)->count);
|
|
buf = &(((struct eeProm *)arg)->bytes[ 0 ]);
|
|
if ( writeEEProm( bktr, offset, count, buf ) < 0 )
|
|
return( EIO );
|
|
break;
|
|
|
|
case BT848_REEPROM: /* read eeprom */
|
|
offset = (((struct eeProm *)arg)->offset);
|
|
count = (((struct eeProm *)arg)->count);
|
|
buf = &(((struct eeProm *)arg)->bytes[ 0 ]);
|
|
if ( readEEProm( bktr, offset, count, buf ) < 0 )
|
|
return( EIO );
|
|
break;
|
|
|
|
case BT848_SIGNATURE:
|
|
offset = (((struct eeProm *)arg)->offset);
|
|
count = (((struct eeProm *)arg)->count);
|
|
buf = &(((struct eeProm *)arg)->bytes[ 0 ]);
|
|
if ( signCard( bktr, offset, count, buf ) < 0 )
|
|
return( EIO );
|
|
break;
|
|
|
|
default:
|
|
return common_ioctl( bktr, bt848, cmd, arg );
|
|
}
|
|
|
|
return( 0 );
|
|
}
|
|
|
|
|
|
/*
|
|
* common ioctls
|
|
*/
|
|
int
|
|
common_ioctl( bktr_ptr_t bktr, bt848_ptr_t bt848, int cmd, caddr_t arg )
|
|
{
|
|
int pixfmt;
|
|
unsigned int temp;
|
|
struct meteor_pixfmt *pf_pub;
|
|
|
|
switch (cmd) {
|
|
|
|
case METEORSINPUT: /* set input device */
|
|
switch(*(unsigned long *)arg & METEOR_DEV_MASK) {
|
|
|
|
/* this is the RCA video input */
|
|
case 0: /* default */
|
|
case METEOR_INPUT_DEV0:
|
|
bktr->flags = (bktr->flags & ~METEOR_DEV_MASK)
|
|
| METEOR_DEV0;
|
|
bt848->iform &= ~BT848_IFORM_MUXSEL;
|
|
bt848->iform |= BT848_IFORM_M_MUX1;
|
|
bt848->e_control &= ~BT848_E_CONTROL_COMP;
|
|
bt848->o_control &= ~BT848_O_CONTROL_COMP;
|
|
set_audio( bktr, AUDIO_EXTERN );
|
|
break;
|
|
|
|
/* this is the tuner input */
|
|
case METEOR_INPUT_DEV1:
|
|
bktr->flags = (bktr->flags & ~METEOR_DEV_MASK)
|
|
| METEOR_DEV1;
|
|
bt848->iform &= ~BT848_IFORM_MUXSEL;
|
|
bt848->iform |= BT848_IFORM_M_MUX0;
|
|
bt848->e_control &= ~BT848_E_CONTROL_COMP;
|
|
bt848->o_control &= ~BT848_O_CONTROL_COMP;
|
|
set_audio( bktr, AUDIO_TUNER );
|
|
break;
|
|
|
|
/* this is the S-VHS input */
|
|
case METEOR_INPUT_DEV2:
|
|
case METEOR_INPUT_DEV_SVIDEO:
|
|
bktr->flags = (bktr->flags & ~METEOR_DEV_MASK)
|
|
| METEOR_DEV2;
|
|
bt848->iform &= ~BT848_IFORM_MUXSEL;
|
|
bt848->iform |= BT848_IFORM_M_MUX2;
|
|
bt848->e_control |= BT848_E_CONTROL_COMP;
|
|
bt848->o_control |= BT848_O_CONTROL_COMP;
|
|
set_audio( bktr, AUDIO_EXTERN );
|
|
break;
|
|
|
|
default:
|
|
return( EINVAL );
|
|
}
|
|
break;
|
|
|
|
case METEORGINPUT: /* get input device */
|
|
*(u_long *)arg = bktr->flags & METEOR_DEV_MASK;
|
|
break;
|
|
|
|
case METEORSACTPIXFMT:
|
|
if (( *(int *)arg < 0 ) ||
|
|
( *(int *)arg >= PIXFMT_TABLE_SIZE ))
|
|
return( EINVAL );
|
|
|
|
bktr->pixfmt = *(int *)arg;
|
|
bt848->color_ctl_swap = pixfmt_swap_flags( bktr->pixfmt );
|
|
bktr->pixfmt_compat = FALSE;
|
|
break;
|
|
|
|
case METEORGACTPIXFMT:
|
|
*(int *)arg = bktr->pixfmt;
|
|
break;
|
|
|
|
case METEORGSUPPIXFMT :
|
|
pf_pub = (struct meteor_pixfmt *)arg;
|
|
pixfmt = pf_pub->index;
|
|
|
|
if (( pixfmt < 0 ) || ( pixfmt >= PIXFMT_TABLE_SIZE ))
|
|
return( EINVAL );
|
|
|
|
memcpy( pf_pub, &pixfmt_table[ pixfmt ].public,
|
|
sizeof( *pf_pub ) );
|
|
|
|
/* Patch in our format index */
|
|
pf_pub->index = pixfmt;
|
|
break;
|
|
|
|
#if defined( STATUS_SUM )
|
|
case BT848_GSTATUS: /* reap status */
|
|
disable_intr();
|
|
temp = status_sum;
|
|
status_sum = 0;
|
|
enable_intr();
|
|
*(u_int*)arg = temp;
|
|
break;
|
|
#endif /* STATUS_SUM */
|
|
|
|
default:
|
|
return( ENOTTY );
|
|
}
|
|
|
|
return( 0 );
|
|
}
|
|
|
|
|
|
/*
|
|
*
|
|
*/
|
|
int
|
|
bktr_mmap( dev_t dev, int offset, int nprot )
|
|
{
|
|
int unit;
|
|
bktr_ptr_t bktr;
|
|
|
|
unit = UNIT(minor(dev));
|
|
|
|
if (unit >= NBKTR || MINOR(minor(dev)) > 0)/* could this happen here? */
|
|
return( -1 );
|
|
|
|
bktr = &(brooktree[ unit ]);
|
|
|
|
if (nprot & PROT_EXEC)
|
|
return( -1 );
|
|
|
|
if (offset >= bktr->alloc_pages * PAGE_SIZE)
|
|
return( -1 );
|
|
|
|
return( i386_btop(vtophys(bktr->bigbuf) + offset) );
|
|
}
|
|
|
|
|
|
/******************************************************************************
|
|
* bt848 RISC programming routines:
|
|
*/
|
|
|
|
|
|
/*
|
|
*
|
|
*/
|
|
#ifdef BT848_DEBUG
|
|
static int
|
|
dump_bt848( bt848_ptr_t bt848 )
|
|
{
|
|
volatile u_char *bt848r = (u_char *)bt848;
|
|
int r[60]={
|
|
4, 8, 0xc, 0x8c, 0x10, 0x90, 0x14, 0x94,
|
|
0x18, 0x98, 0x1c, 0x9c, 0x20, 0xa0, 0x24, 0xa4,
|
|
0x28, 0x2c, 0xac, 0x30, 0x34, 0x38, 0x3c, 0x40,
|
|
0xc0, 0x48, 0x4c, 0xcc, 0x50, 0xd0, 0xd4, 0x60,
|
|
0x64, 0x68, 0x6c, 0xec, 0xd8, 0xdc, 0xe0, 0xe4,
|
|
0, 0, 0, 0
|
|
};
|
|
int i;
|
|
|
|
for (i = 0; i < 40; i+=4) {
|
|
printf(" Reg:value : \t%x:%x \t%x:%x \t %x:%x \t %x:%x\n",
|
|
r[i], bt848r[r[i]],
|
|
r[i+1], bt848r[r[i+1]],
|
|
r[i+2], bt848r[r[i+2]],
|
|
r[i+3], bt848r[r[i+3]]);
|
|
}
|
|
|
|
printf(" INT STAT %x \n", bt848->int_stat);
|
|
printf(" Reg INT_MASK %x \n", bt848->int_mask);
|
|
printf(" Reg GPIO_DMA_CTL %x \n", bt848->gpio_dma_ctl);
|
|
|
|
return( 0 );
|
|
}
|
|
|
|
#endif
|
|
|
|
/*
|
|
* build write instruction
|
|
*/
|
|
#define BKTR_FM1 0x6 /* packed data to follow */
|
|
#define BKTR_FM3 0xe /* planar data to follow */
|
|
#define BKTR_VRE 0x4 /* even field to follow */
|
|
#define BKTR_VRO 0xC /* odd field to follow */
|
|
#define BKTR_PXV 0x0 /* valid word (never used) */
|
|
#define BKTR_EOL 0x1 /* last dword, 4 bytes */
|
|
#define BKTR_SOL 0x2 /* first dword */
|
|
|
|
#define OP_WRITE (0x1 << 28)
|
|
#define OP_SKIP (0x2 << 28)
|
|
#define OP_WRITEC (0x5 << 28)
|
|
#define OP_JUMP (0x7 << 28)
|
|
#define OP_SYNC (0x8 << 28)
|
|
#define OP_WRITE123 (0x9 << 28)
|
|
#define OP_WRITES123 (0xb << 28)
|
|
#define OP_SOL (1 << 27) /* first instr for scanline */
|
|
#define OP_EOL (1 << 26)
|
|
|
|
bool_t notclipped (bktr_reg_t * bktr, int x, int width) {
|
|
int i;
|
|
bktr_clip_t * clip_node;
|
|
bktr->clip_start = -1;
|
|
bktr->last_y = 0;
|
|
bktr->y = 0;
|
|
bktr->y2 = width;
|
|
bktr->line_length = width;
|
|
bktr->yclip = -1;
|
|
bktr->yclip2 = -1;
|
|
bktr->current_col = 0;
|
|
|
|
if (bktr->max_clip_node == 0 ) return TRUE;
|
|
clip_node = (bktr_clip_t *) &bktr->clip_list[0];
|
|
|
|
|
|
for (i = 0; i < bktr->max_clip_node; i++ ) {
|
|
clip_node = (bktr_clip_t *) &bktr->clip_list[i];
|
|
if (x >= clip_node->x_min && x <= clip_node->x_max ) {
|
|
bktr->clip_start = i;
|
|
return FALSE;
|
|
}
|
|
}
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
bool_t getline(bktr_reg_t *bktr, int x ) {
|
|
int i, j;
|
|
bktr_clip_t * clip_node ;
|
|
|
|
if (bktr->line_length == 0 ||
|
|
bktr->current_col >= bktr->line_length) return FALSE;
|
|
|
|
bktr->y = min(bktr->last_y, bktr->line_length);
|
|
bktr->y2 = bktr->line_length;
|
|
|
|
bktr->yclip = bktr->yclip2 = -1;
|
|
for (i = bktr->clip_start; i < bktr->max_clip_node; i++ ) {
|
|
clip_node = (bktr_clip_t *) &bktr->clip_list[i];
|
|
if (x >= clip_node->x_min && x <= clip_node->x_max) {
|
|
if (bktr->last_y <= clip_node->y_min) {
|
|
bktr->y = min(bktr->last_y, bktr->line_length);
|
|
bktr->y2 = min(clip_node->y_min, bktr->line_length);
|
|
bktr->yclip = min(clip_node->y_min, bktr->line_length);
|
|
bktr->yclip2 = min(clip_node->y_max, bktr->line_length);
|
|
bktr->last_y = bktr->yclip2;
|
|
bktr->clip_start = i;
|
|
|
|
for (j = i+1; j < bktr->max_clip_node; j++ ) {
|
|
clip_node = (bktr_clip_t *) &bktr->clip_list[j];
|
|
if (x >= clip_node->x_min && x <= clip_node->x_max) {
|
|
if (bktr->last_y >= clip_node->y_min) {
|
|
bktr->yclip2 = min(clip_node->y_max, bktr->line_length);
|
|
bktr->last_y = bktr->yclip2;
|
|
bktr->clip_start = j;
|
|
}
|
|
} else break ;
|
|
}
|
|
return TRUE;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (bktr->current_col <= bktr->line_length) {
|
|
bktr->current_col = bktr->line_length;
|
|
return TRUE;
|
|
}
|
|
return FALSE;
|
|
}
|
|
|
|
static bool_t split(bktr_reg_t * bktr, volatile u_long **dma_prog, int width ,
|
|
u_long operation, int pixel_width,
|
|
volatile u_char ** target_buffer, int cols ) {
|
|
|
|
u_long flag, flag2;
|
|
if ((width * pixel_width) < DMA_BT848_SPLIT ) {
|
|
if ( width == cols) {
|
|
flag = OP_SOL | OP_EOL;
|
|
} else if (bktr->current_col == 0 ) {
|
|
flag = OP_SOL;
|
|
} else if (bktr->current_col == cols) {
|
|
flag = OP_EOL;
|
|
} else flag = 0;
|
|
|
|
*(*dma_prog)++ = operation | flag | width * pixel_width;
|
|
if (operation != OP_SKIP )
|
|
*(*dma_prog)++ = (u_long) *target_buffer;
|
|
|
|
*target_buffer += width * pixel_width;
|
|
bktr->current_col += width;
|
|
|
|
|
|
|
|
} else {
|
|
|
|
if (bktr->current_col == 0 && width == cols) {
|
|
flag = OP_SOL ;
|
|
flag2 = OP_EOL;
|
|
} else if (bktr->current_col == 0 ) {
|
|
flag = OP_SOL;
|
|
flag2 = 0;
|
|
} else if (bktr->current_col >= cols) {
|
|
flag = 0;
|
|
flag2 = OP_EOL;
|
|
} else {
|
|
flag = 0;
|
|
flag2 = 0;
|
|
}
|
|
*(*dma_prog)++ = operation | flag |
|
|
(width * pixel_width / 2);
|
|
if (operation != OP_SKIP )
|
|
*(*dma_prog)++ = (u_long ) *target_buffer ;
|
|
*target_buffer += (width * pixel_width / 2) ;
|
|
|
|
*(*dma_prog)++ = operation | flag2 |
|
|
(width * pixel_width / 2);
|
|
if (operation != OP_SKIP )
|
|
*(*dma_prog)++ = (u_long ) *target_buffer ;
|
|
*target_buffer += (width * pixel_width / 2) ;
|
|
bktr->current_col += width;
|
|
|
|
}
|
|
return TRUE;
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
|
rgb_prog( bktr_ptr_t bktr, char i_flag, int cols, int rows, int interlace )
|
|
{
|
|
int i;
|
|
bt848_ptr_t bt848;
|
|
volatile u_long target_buffer, buffer, target,width;
|
|
volatile u_long pitch;
|
|
volatile u_long *dma_prog;
|
|
struct meteor_pixfmt_internal *pf_int = &pixfmt_table[ bktr->pixfmt ];
|
|
u_int Bpp = pf_int->public.Bpp;
|
|
|
|
bt848 = bktr->base;
|
|
|
|
bt848->color_fmt = pf_int->color_fmt;
|
|
bt848->vbi_pack_size = 0;
|
|
bt848->vbi_pack_del = 0;
|
|
bt848->adc = SYNC_LEVEL;
|
|
bt848->color_ctl_rgb_ded = 1;
|
|
|
|
bt848->e_vscale_hi |= 0xc0;
|
|
bt848->o_vscale_hi |= 0xc0;
|
|
if (cols > 385 ) {
|
|
bt848->e_vtc = 0;
|
|
bt848->o_vtc = 0;
|
|
} else {
|
|
bt848->e_vtc = 1;
|
|
bt848->o_vtc = 1;
|
|
}
|
|
bktr->capcontrol = 3 << 2 | 3;
|
|
|
|
dma_prog = (u_long *) bktr->dma_prog;
|
|
|
|
/* Construct Write */
|
|
|
|
if (bktr->video.addr) {
|
|
target_buffer = (u_long) bktr->video.addr;
|
|
pitch = bktr->video.width;
|
|
}
|
|
else {
|
|
target_buffer = (u_long) vtophys(bktr->bigbuf);
|
|
pitch = cols*Bpp;
|
|
}
|
|
|
|
buffer = target_buffer;
|
|
if (interlace == 2 && rows < 320 ) target_buffer += pitch;
|
|
|
|
/* contruct sync : for video packet format */
|
|
*dma_prog++ = OP_SYNC | 1 << 15 | BKTR_FM1;
|
|
|
|
/* sync, mode indicator packed data */
|
|
*dma_prog++ = 0; /* NULL WORD */
|
|
width = cols;
|
|
for (i = 0; i < (rows/interlace); i++) {
|
|
target = target_buffer;
|
|
if ( notclipped(bktr, i, width)) {
|
|
split(bktr, (volatile u_long **) &dma_prog,
|
|
bktr->y2 - bktr->y, OP_WRITE,
|
|
Bpp, (volatile u_char **) &target, cols);
|
|
|
|
} else {
|
|
while(getline(bktr, i)) {
|
|
if (bktr->y != bktr->y2 ) {
|
|
split(bktr, (volatile u_long **) &dma_prog,
|
|
bktr->y2 - bktr->y, OP_WRITE,
|
|
Bpp, (volatile u_char **) &target, cols);
|
|
}
|
|
if (bktr->yclip != bktr->yclip2 ) {
|
|
split(bktr,(volatile u_long **) &dma_prog,
|
|
bktr->yclip2 - bktr->yclip,
|
|
OP_SKIP,
|
|
Bpp, (volatile u_char **) &target, cols);
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
target_buffer += interlace * pitch;
|
|
|
|
}
|
|
|
|
switch (i_flag) {
|
|
case 1:
|
|
/* sync vre */
|
|
*dma_prog++ = OP_SYNC | 0xC << 24 | 1 << 24 | BKTR_VRE;
|
|
*dma_prog++ = 0; /* NULL WORD */
|
|
|
|
*dma_prog++ = OP_JUMP | 0xC << 24;
|
|
*dma_prog++ = (u_long ) vtophys(bktr->dma_prog);
|
|
return;
|
|
|
|
case 2:
|
|
/* sync vro */
|
|
*dma_prog++ = OP_SYNC | 1 << 24 | 1 << 20 | BKTR_VRO;
|
|
*dma_prog++ = 0; /* NULL WORD */
|
|
|
|
*dma_prog++ = OP_JUMP;
|
|
*dma_prog++ = (u_long ) vtophys(bktr->dma_prog);
|
|
return;
|
|
|
|
case 3:
|
|
/* sync vro */
|
|
*dma_prog++ = OP_SYNC | 1 << 24 | 1 << 15 | BKTR_VRO;
|
|
*dma_prog++ = 0; /* NULL WORD */
|
|
*dma_prog++ = OP_JUMP | 0xc << 24 ;
|
|
*dma_prog = (u_long ) vtophys(bktr->odd_dma_prog);
|
|
break;
|
|
}
|
|
|
|
if (interlace == 2) {
|
|
if (rows < 320 )
|
|
target_buffer = buffer ;
|
|
else
|
|
target_buffer = buffer + pitch;
|
|
|
|
dma_prog = (u_long *) bktr->odd_dma_prog;
|
|
|
|
|
|
/* sync vre IRQ bit */
|
|
*dma_prog++ = OP_SYNC | 1 << 15 | BKTR_FM1;
|
|
*dma_prog++ = 0; /* NULL WORD */
|
|
width = cols;
|
|
for (i = 0; i < (rows/interlace); i++) {
|
|
target = target_buffer;
|
|
if ( notclipped(bktr, i, width)) {
|
|
split(bktr, (volatile u_long **) &dma_prog,
|
|
bktr->y2 - bktr->y, OP_WRITE,
|
|
Bpp, (volatile u_char **) &target, cols);
|
|
} else {
|
|
while(getline(bktr, i)) {
|
|
if (bktr->y != bktr->y2 ) {
|
|
split(bktr, (volatile u_long **) &dma_prog,
|
|
bktr->y2 - bktr->y, OP_WRITE,
|
|
Bpp, (volatile u_char **) &target,
|
|
cols);
|
|
}
|
|
if (bktr->yclip != bktr->yclip2 ) {
|
|
split(bktr, (volatile u_long **) &dma_prog,
|
|
bktr->yclip2 - bktr->yclip, OP_SKIP,
|
|
Bpp, (volatile u_char **) &target, cols);
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
target_buffer += interlace * pitch;
|
|
|
|
}
|
|
}
|
|
|
|
/* sync vre IRQ bit */
|
|
*dma_prog++ = OP_SYNC | 1 << 24 | 1 << 15 | BKTR_VRE;
|
|
*dma_prog++ = 0; /* NULL WORD */
|
|
*dma_prog++ = OP_JUMP ;
|
|
*dma_prog++ = (u_long ) vtophys(bktr->dma_prog) ;
|
|
*dma_prog++ = 0; /* NULL WORD */
|
|
}
|
|
|
|
|
|
/*
|
|
*
|
|
*/
|
|
static void
|
|
yuvpack_prog( bktr_ptr_t bktr, char i_flag,
|
|
int cols, int rows, int interlace )
|
|
{
|
|
int i;
|
|
volatile unsigned int inst;
|
|
volatile unsigned int inst3;
|
|
volatile u_long target_buffer, buffer;
|
|
bt848_ptr_t bt848;
|
|
volatile u_long *dma_prog;
|
|
struct meteor_pixfmt_internal *pf_int = &pixfmt_table[ bktr->pixfmt ];
|
|
int b;
|
|
|
|
bt848 = bktr->base;
|
|
|
|
bt848->color_fmt = pf_int->color_fmt;
|
|
|
|
bt848->e_scloop |= BT848_E_SCLOOP_CAGC; /* enable chroma comb */
|
|
bt848->o_scloop |= BT848_O_SCLOOP_CAGC;
|
|
|
|
bt848->color_ctl_rgb_ded = 1;
|
|
bt848->color_ctl_gamma = 1;
|
|
bt848->adc = SYNC_LEVEL;
|
|
|
|
bktr->capcontrol = 1 << 6 | 1 << 4 | 1 << 2 | 3;
|
|
bktr->capcontrol = 3 << 2 | 3;
|
|
|
|
dma_prog = (u_long *) bktr->dma_prog;
|
|
|
|
/* Construct Write */
|
|
|
|
/* write , sol, eol */
|
|
inst = OP_WRITE | OP_SOL | (cols);
|
|
/* write , sol, eol */
|
|
inst3 = OP_WRITE | OP_EOL | (cols);
|
|
|
|
if (bktr->video.addr)
|
|
target_buffer = (u_long) bktr->video.addr;
|
|
else
|
|
target_buffer = (u_long) vtophys(bktr->bigbuf);
|
|
|
|
buffer = target_buffer;
|
|
|
|
/* contruct sync : for video packet format */
|
|
/* sync, mode indicator packed data */
|
|
*dma_prog++ = OP_SYNC | 1 << 15 | BKTR_FM1;
|
|
*dma_prog++ = 0; /* NULL WORD */
|
|
|
|
b = cols;
|
|
|
|
for (i = 0; i < (rows/interlace); i++) {
|
|
*dma_prog++ = inst;
|
|
*dma_prog++ = target_buffer;
|
|
*dma_prog++ = inst3;
|
|
*dma_prog++ = target_buffer + b;
|
|
target_buffer += interlace*(cols * 2);
|
|
}
|
|
|
|
switch (i_flag) {
|
|
case 1:
|
|
/* sync vre */
|
|
*dma_prog++ = OP_SYNC | 0xC << 24 | BKTR_VRE;
|
|
*dma_prog++ = 0; /* NULL WORD */
|
|
|
|
*dma_prog++ = OP_JUMP;
|
|
*dma_prog++ = (u_long ) vtophys(bktr->dma_prog);
|
|
return;
|
|
|
|
case 2:
|
|
/* sync vro */
|
|
*dma_prog++ = OP_SYNC | 0xC << 24 | BKTR_VRO;
|
|
*dma_prog++ = 0; /* NULL WORD */
|
|
*dma_prog++ = OP_JUMP;
|
|
*dma_prog++ = (u_long ) vtophys(bktr->dma_prog);
|
|
return;
|
|
|
|
case 3:
|
|
/* sync vre */
|
|
*dma_prog++ = OP_SYNC | BKTR_VRE;
|
|
*dma_prog++ = 0; /* NULL WORD */
|
|
*dma_prog++ = OP_JUMP ;
|
|
*dma_prog = (u_long ) vtophys(bktr->odd_dma_prog);
|
|
break;
|
|
}
|
|
|
|
if (interlace == 2) {
|
|
|
|
target_buffer = (u_long) buffer + cols*2;
|
|
|
|
dma_prog = (u_long * ) bktr->odd_dma_prog;
|
|
|
|
/* sync vre */
|
|
*dma_prog++ = OP_SYNC | 1 << 24 | 1 << 15 | BKTR_FM1;
|
|
*dma_prog++ = 0; /* NULL WORD */
|
|
|
|
for (i = 0; i < (rows/interlace) ; i++) {
|
|
*dma_prog++ = inst;
|
|
*dma_prog++ = target_buffer;
|
|
*dma_prog++ = inst3;
|
|
*dma_prog++ = target_buffer + b;
|
|
target_buffer += interlace * ( cols*2);
|
|
}
|
|
}
|
|
|
|
/* sync vro IRQ bit */
|
|
*dma_prog++ = OP_SYNC | 1 << 24 | BKTR_VRE;
|
|
*dma_prog++ = 0; /* NULL WORD */
|
|
*dma_prog++ = OP_JUMP ;
|
|
*dma_prog++ = (u_long ) vtophys(bktr->dma_prog);
|
|
|
|
*dma_prog++ = OP_JUMP;
|
|
*dma_prog++ = (u_long ) vtophys(bktr->dma_prog);
|
|
*dma_prog++ = 0; /* NULL WORD */
|
|
}
|
|
|
|
|
|
/*
|
|
*
|
|
*/
|
|
static void
|
|
yuv422_prog( bktr_ptr_t bktr, char i_flag,
|
|
int cols, int rows, int interlace ){
|
|
|
|
int i;
|
|
volatile unsigned int inst;
|
|
volatile u_long target_buffer, t1, buffer;
|
|
bt848_ptr_t bt848;
|
|
volatile u_long *dma_prog;
|
|
struct meteor_pixfmt_internal *pf_int = &pixfmt_table[ bktr->pixfmt ];
|
|
|
|
bt848 = bktr->base;
|
|
|
|
bt848->color_fmt = pf_int->color_fmt;
|
|
|
|
dma_prog = (u_long *) bktr->dma_prog;
|
|
|
|
bktr->capcontrol = 1 << 6 | 1 << 4 | 3;
|
|
|
|
bt848->adc = SYNC_LEVEL;
|
|
bt848->oform = 0x00;
|
|
|
|
bt848->e_control |= BT848_E_CONTROL_LDEC; /* disable luma decimation */
|
|
bt848->o_control |= BT848_O_CONTROL_LDEC;
|
|
|
|
bt848->e_scloop |= BT848_O_SCLOOP_CAGC; /* chroma agc enable */
|
|
bt848->o_scloop |= BT848_O_SCLOOP_CAGC;
|
|
|
|
bt848->e_vscale_hi &= ~0x80; /* clear Ycomb */
|
|
bt848->o_vscale_hi &= ~0x80;
|
|
bt848->e_vscale_hi |= 0x40; /* set chroma comb */
|
|
bt848->o_vscale_hi |= 0x40;
|
|
|
|
/* disable gamma correction removal */
|
|
bt848->color_ctl_gamma = 1;
|
|
|
|
/* Construct Write */
|
|
inst = OP_WRITE123 | OP_SOL | OP_EOL | (cols);
|
|
if (bktr->video.addr)
|
|
target_buffer = (u_long) bktr->video.addr;
|
|
else
|
|
target_buffer = (u_long) vtophys(bktr->bigbuf);
|
|
|
|
buffer = target_buffer;
|
|
|
|
t1 = target_buffer;
|
|
|
|
/* contruct sync : for video packet format */
|
|
*dma_prog++ = OP_SYNC | 1 << 15 | BKTR_FM3; /*sync, mode indicator packed data*/
|
|
*dma_prog++ = 0; /* NULL WORD */
|
|
|
|
for (i = 0; i < (rows/interlace ) - 1; i++) {
|
|
*dma_prog++ = inst;
|
|
*dma_prog++ = cols/2 | cols/2 << 16;
|
|
*dma_prog++ = target_buffer;
|
|
*dma_prog++ = t1 + (cols*rows) + i*cols/2 * interlace;
|
|
*dma_prog++ = t1 + (cols*rows) + (cols*rows/2) + i*cols/2 * interlace;
|
|
target_buffer += interlace*cols;
|
|
}
|
|
|
|
switch (i_flag) {
|
|
case 1:
|
|
*dma_prog++ = OP_SYNC | 0xC << 24 | 1 << 24 | BKTR_VRE; /*sync vre*/
|
|
*dma_prog++ = 0; /* NULL WORD */
|
|
|
|
*dma_prog++ = OP_JUMP | 0xc << 24;
|
|
*dma_prog++ = (u_long ) vtophys(bktr->dma_prog);
|
|
return;
|
|
|
|
case 2:
|
|
*dma_prog++ = OP_SYNC | 0xC << 24 | 1 << 24 | BKTR_VRO; /*sync vre*/
|
|
*dma_prog++ = 0; /* NULL WORD */
|
|
|
|
*dma_prog++ = OP_JUMP;
|
|
*dma_prog++ = (u_long ) vtophys(bktr->dma_prog);
|
|
return;
|
|
|
|
case 3:
|
|
*dma_prog++ = OP_SYNC | 1 << 15 | BKTR_VRO;
|
|
*dma_prog++ = 0; /* NULL WORD */
|
|
|
|
*dma_prog++ = OP_JUMP ;
|
|
*dma_prog = (u_long ) vtophys(bktr->odd_dma_prog);
|
|
break;
|
|
}
|
|
|
|
if (interlace == 2) {
|
|
|
|
dma_prog = (u_long * ) bktr->odd_dma_prog;
|
|
|
|
target_buffer = (u_long) buffer + cols;
|
|
t1 = target_buffer + cols/2;
|
|
*dma_prog++ = OP_SYNC | 1 << 15 | BKTR_FM3;
|
|
*dma_prog++ = 0; /* NULL WORD */
|
|
|
|
for (i = 0; i < (rows/interlace ) - 1; i++) {
|
|
*dma_prog++ = inst;
|
|
*dma_prog++ = cols/2 | cols/2 << 16;
|
|
*dma_prog++ = target_buffer;
|
|
*dma_prog++ = t1 + (cols*rows) + i*cols/2 * interlace;
|
|
*dma_prog++ = t1 + (cols*rows) + (cols*rows/2) + i*cols/2 * interlace;
|
|
target_buffer += interlace*cols;
|
|
}
|
|
}
|
|
|
|
*dma_prog++ = OP_SYNC | 1 << 24 | BKTR_VRE;
|
|
*dma_prog++ = 0; /* NULL WORD */
|
|
*dma_prog++ = OP_JUMP ;
|
|
*dma_prog++ = (u_long ) vtophys(bktr->dma_prog) ;
|
|
*dma_prog++ = 0; /* NULL WORD */
|
|
}
|
|
|
|
|
|
/*
|
|
*
|
|
*/
|
|
static void
|
|
build_dma_prog( bktr_ptr_t bktr, char i_flag )
|
|
{
|
|
int rows, cols, interlace;
|
|
bt848_ptr_t bt848;
|
|
struct meteor_pixfmt_internal *pf_int = &pixfmt_table[ bktr->pixfmt ];
|
|
|
|
bt848 = bktr->base;
|
|
bt848->int_mask = ALL_INTS_DISABLED;
|
|
|
|
/* disable FIFO & RISC, leave other bits alone */
|
|
bt848->gpio_dma_ctl &= ~FIFO_RISC_ENABLED;
|
|
|
|
/* capture control */
|
|
switch (i_flag) {
|
|
case 1:
|
|
bktr->bktr_cap_ctl =
|
|
(BT848_CAP_CTL_DITH_FRAME | BT848_CAP_CTL_EVEN);
|
|
bt848->e_vscale_hi &= ~0x20;
|
|
bt848->o_vscale_hi &= ~0x20;
|
|
interlace = 1;
|
|
break;
|
|
case 2:
|
|
bktr->bktr_cap_ctl =
|
|
(BT848_CAP_CTL_DITH_FRAME | BT848_CAP_CTL_ODD);
|
|
bt848->e_vscale_hi &= ~0x20;
|
|
bt848->o_vscale_hi &= ~0x20;
|
|
interlace = 1;
|
|
break;
|
|
default:
|
|
bktr->bktr_cap_ctl =
|
|
(BT848_CAP_CTL_DITH_FRAME |
|
|
BT848_CAP_CTL_EVEN | BT848_CAP_CTL_ODD);
|
|
bt848->e_vscale_hi |= 0x20;
|
|
bt848->o_vscale_hi |= 0x20;
|
|
interlace = 2;
|
|
break;
|
|
}
|
|
|
|
bt848->risc_strt_add = vtophys(bktr->dma_prog);
|
|
|
|
rows = bktr->rows;
|
|
cols = bktr->cols;
|
|
|
|
if ( pf_int->public.type == METEOR_PIXTYPE_RGB ) {
|
|
rgb_prog(bktr, i_flag, cols, rows, interlace);
|
|
return;
|
|
}
|
|
|
|
if ( pf_int->public.type == METEOR_PIXTYPE_YUV ) {
|
|
yuv422_prog(bktr, i_flag, cols, rows, interlace);
|
|
bt848->color_ctl_swap = pixfmt_swap_flags( bktr->pixfmt );
|
|
return;
|
|
}
|
|
|
|
if ( pf_int->public.type == METEOR_PIXTYPE_YUV_PACKED ) {
|
|
yuvpack_prog(bktr, i_flag, cols, rows, interlace);
|
|
bt848->color_ctl_swap = pixfmt_swap_flags( bktr->pixfmt );
|
|
return;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
/******************************************************************************
|
|
* video & video capture specific routines:
|
|
*/
|
|
|
|
|
|
/*
|
|
*
|
|
*/
|
|
static void
|
|
start_capture( bktr_ptr_t bktr, unsigned type )
|
|
{
|
|
bt848_ptr_t bt848;
|
|
u_char i_flag;
|
|
|
|
bt848 = bktr->base;
|
|
|
|
bt848->dstatus = 0;
|
|
bt848->int_stat = bt848->int_stat;
|
|
|
|
bktr->flags |= type;
|
|
switch(bktr->flags & METEOR_ONLY_FIELDS_MASK) {
|
|
case METEOR_ONLY_EVEN_FIELDS:
|
|
bktr->flags |= METEOR_WANT_EVEN;
|
|
i_flag = 1;
|
|
break;
|
|
case METEOR_ONLY_ODD_FIELDS:
|
|
bktr->flags |= METEOR_WANT_ODD;
|
|
i_flag = 2;
|
|
break;
|
|
default:
|
|
bktr->flags |= METEOR_WANT_MASK;
|
|
i_flag = 3;
|
|
break;
|
|
}
|
|
|
|
set_fps(bktr, bktr->fps);
|
|
if (bktr->dma_prog_loaded == FALSE) {
|
|
build_dma_prog(bktr, i_flag);
|
|
bktr->dma_prog_loaded = TRUE;
|
|
}
|
|
|
|
|
|
bt848->risc_strt_add = vtophys(bktr->dma_prog);
|
|
|
|
}
|
|
|
|
|
|
/*
|
|
*
|
|
*/
|
|
static void
|
|
set_fps( bktr_ptr_t bktr, u_short fps )
|
|
{
|
|
bt848_ptr_t bt848;
|
|
struct format_params *fp;
|
|
int i_flag;
|
|
|
|
fp = &format_params[bktr->format_params];
|
|
|
|
bt848 = bktr->base;
|
|
|
|
switch(bktr->flags & METEOR_ONLY_FIELDS_MASK) {
|
|
case METEOR_ONLY_EVEN_FIELDS:
|
|
bktr->flags |= METEOR_WANT_EVEN;
|
|
i_flag = 1;
|
|
break;
|
|
case METEOR_ONLY_ODD_FIELDS:
|
|
bktr->flags |= METEOR_WANT_ODD;
|
|
i_flag = 1;
|
|
break;
|
|
default:
|
|
bktr->flags |= METEOR_WANT_MASK;
|
|
i_flag = 2;
|
|
break;
|
|
}
|
|
|
|
bt848->gpio_dma_ctl = FIFO_RISC_DISABLED;
|
|
bt848->int_stat = ALL_INTS_CLEARED;
|
|
|
|
bktr->fps = fps;
|
|
bt848->tdec = 0;
|
|
|
|
if (fps < fp->frame_rate)
|
|
bt848->tdec = i_flag*(fp->frame_rate - fps) & 0x3f;
|
|
else
|
|
bt848->tdec = 0;
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
/*
|
|
* There is also a problem with range checking on the 7116.
|
|
* It seems to only work for 22 bits, so the max size we can allocate
|
|
* is 22 bits long or 4194304 bytes assuming that we put the beginning
|
|
* of the buffer on a 2^24 bit boundary. The range registers will use
|
|
* the top 8 bits of the dma start registers along with the bottom 22
|
|
* bits of the range register to determine if we go out of range.
|
|
* This makes getting memory a real kludge.
|
|
*
|
|
*/
|
|
|
|
#define RANGE_BOUNDARY (1<<22)
|
|
static vm_offset_t
|
|
get_bktr_mem( int unit, unsigned size )
|
|
{
|
|
vm_offset_t addr = 0;
|
|
|
|
addr = vm_page_alloc_contig(size, 0x100000, 0xffffffff, 1<<24);
|
|
if (addr == 0)
|
|
addr = vm_page_alloc_contig(size, 0x100000, 0xffffffff,
|
|
PAGE_SIZE);
|
|
if (addr == 0) {
|
|
printf("bktr%d: Unable to allocate %d bytes of memory.\n",
|
|
unit, size);
|
|
}
|
|
|
|
return( addr );
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* Given a pixfmt index, compute the bt848 swap_flags necessary to
|
|
* achieve the specified swapping.
|
|
* Note that without bt swapping, 2Bpp and 3Bpp modes are written
|
|
* byte-swapped, and 4Bpp modes are byte and word swapped (see Table 6
|
|
* and read R->L).
|
|
* This is abstracted here: e.g. no swaps = RGBA; byte & short swap = ABGR
|
|
* as one would expect.
|
|
*/
|
|
|
|
static u_int pixfmt_swap_flags( int pixfmt )
|
|
{
|
|
struct meteor_pixfmt *pf = &pixfmt_table[ pixfmt ].public;
|
|
u_int swapf = 0;
|
|
|
|
switch ( pf->Bpp ) {
|
|
case 2 : swapf = ( pf->swap_bytes ? 0 : BSWAP );
|
|
break;
|
|
|
|
case 3 : /* no swaps supported for 3bpp - makes no sense w/ bt848 */
|
|
break;
|
|
|
|
case 4 : if ( pf->swap_bytes )
|
|
swapf = pf->swap_shorts ? 0 : WSWAP;
|
|
else
|
|
swapf = pf->swap_shorts ? BSWAP : (BSWAP | WSWAP);
|
|
break;
|
|
}
|
|
return swapf;
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* Converts meteor-defined pixel formats (e.g. METEOR_GEO_RGB16) into
|
|
* our pixfmt_table indices.
|
|
*/
|
|
|
|
static int oformat_meteor_to_bt( u_long format )
|
|
{
|
|
int i;
|
|
struct meteor_pixfmt *pf1, *pf2;
|
|
|
|
/* Find format in compatibility table */
|
|
for ( i = 0; i < METEOR_PIXFMT_TABLE_SIZE; i++ )
|
|
if ( meteor_pixfmt_table[i].meteor_format == format )
|
|
break;
|
|
|
|
if ( i >= METEOR_PIXFMT_TABLE_SIZE )
|
|
return -1;
|
|
pf1 = &meteor_pixfmt_table[i].public;
|
|
|
|
/* Match it with an entry in master pixel format table */
|
|
for ( i = 0; i < PIXFMT_TABLE_SIZE; i++ ) {
|
|
pf2 = &pixfmt_table[i].public;
|
|
|
|
if (( pf1->type == pf2->type ) &&
|
|
( pf1->Bpp == pf2->Bpp ) &&
|
|
!memcmp( pf1->masks, pf2->masks, sizeof( pf1->masks )) &&
|
|
( pf1->swap_bytes == pf2->swap_bytes ) &&
|
|
( pf1->swap_shorts == pf2->swap_shorts ))
|
|
break;
|
|
}
|
|
if ( i >= PIXFMT_TABLE_SIZE )
|
|
return -1;
|
|
|
|
return i;
|
|
}
|
|
|
|
/******************************************************************************
|
|
* i2c primitives:
|
|
*/
|
|
|
|
/* */
|
|
#define I2CBITTIME (0x5<<4) /* 5 * 0.48uS */
|
|
#define I2C_READ 0x01
|
|
#define I2C_COMMAND (I2CBITTIME | \
|
|
BT848_DATA_CTL_I2CSCL | \
|
|
BT848_DATA_CTL_I2CSDA)
|
|
|
|
/*
|
|
*
|
|
*/
|
|
static int
|
|
i2cWrite( bktr_ptr_t bktr, int addr, int byte1, int byte2 )
|
|
{
|
|
u_long x;
|
|
u_long data;
|
|
bt848_ptr_t bt848;
|
|
|
|
bt848 = bktr->base;
|
|
|
|
/* clear status bits */
|
|
bt848->int_stat = (BT848_INT_RACK | BT848_INT_I2CDONE);
|
|
|
|
/* build the command datum */
|
|
data = ((addr & 0xff) << 24) | ((byte1 & 0xff) << 16) | I2C_COMMAND;
|
|
if ( byte2 != -1 ) {
|
|
data |= ((byte2 & 0xff) << 8);
|
|
data |= BT848_DATA_CTL_I2CW3B;
|
|
}
|
|
|
|
/* write the address and data */
|
|
bt848->i2c_data_ctl = data;
|
|
|
|
/* wait for completion */
|
|
for ( x = 0x7fffffff; x; --x ) { /* safety valve */
|
|
if ( bt848->int_stat & BT848_INT_I2CDONE )
|
|
break;
|
|
}
|
|
|
|
/* check for ACK */
|
|
if ( !x || !(bt848->int_stat & BT848_INT_RACK) )
|
|
return( -1 );
|
|
|
|
/* return OK */
|
|
return( 0 );
|
|
}
|
|
|
|
|
|
/*
|
|
*
|
|
*/
|
|
static int
|
|
i2cRead( bktr_ptr_t bktr, int addr )
|
|
{
|
|
u_long x;
|
|
bt848_ptr_t bt848;
|
|
|
|
bt848 = bktr->base;
|
|
|
|
/* clear status bits */
|
|
bt848->int_stat = (BT848_INT_RACK | BT848_INT_I2CDONE);
|
|
|
|
/* write the READ address */
|
|
bt848->i2c_data_ctl = ((addr & 0xff) << 24) | I2C_COMMAND;
|
|
|
|
/* wait for completion */
|
|
for ( x = 0x7fffffff; x; --x ) { /* safety valve */
|
|
if ( bt848->int_stat & BT848_INT_I2CDONE )
|
|
break;
|
|
}
|
|
|
|
/* check for ACK */
|
|
if ( !x || !(bt848->int_stat & BT848_INT_RACK) )
|
|
return( -1 );
|
|
|
|
/* it was a read */
|
|
return( (bt848->i2c_data_ctl >> 8) & 0xff );
|
|
}
|
|
|
|
|
|
#if defined( I2C_SOFTWARE_PROBE )
|
|
|
|
/*
|
|
* we are keeping this around for any parts that we need to probe
|
|
* but that CANNOT be probed via an i2c read.
|
|
* this is necessary because the hardware i2c mechanism
|
|
* cannot be programmed for 1 byte writes.
|
|
* currently there are no known i2c parts that we need to probe
|
|
* and that cannot be safely read.
|
|
*/
|
|
static int i2cProbe( bktr_ptr_t bktr, int addr );
|
|
#define BITD 40
|
|
#define EXTRA_START
|
|
|
|
/*
|
|
* probe for an I2C device at addr.
|
|
*/
|
|
static int
|
|
i2cProbe( bktr_ptr_t bktr, int addr )
|
|
{
|
|
int x, status;
|
|
bt848_ptr_t bt848;
|
|
|
|
bt848 = bktr->base;
|
|
|
|
/* the START */
|
|
#if defined( EXTRA_START )
|
|
bt848->i2c_data_ctl = 1; DELAY( BITD ); /* release data */
|
|
bt848->i2c_data_ctl = 3; DELAY( BITD ); /* release clock */
|
|
#endif /* EXTRA_START */
|
|
bt848->i2c_data_ctl = 2; DELAY( BITD ); /* lower data */
|
|
bt848->i2c_data_ctl = 0; DELAY( BITD ); /* lower clock */
|
|
|
|
/* write addr */
|
|
for ( x = 7; x >= 0; --x ) {
|
|
if ( addr & (1<<x) ) {
|
|
bt848->i2c_data_ctl = 1;
|
|
DELAY( BITD ); /* assert HI data */
|
|
bt848->i2c_data_ctl = 3;
|
|
DELAY( BITD ); /* strobe clock */
|
|
bt848->i2c_data_ctl = 1;
|
|
DELAY( BITD ); /* release clock */
|
|
}
|
|
else {
|
|
bt848->i2c_data_ctl = 0;
|
|
DELAY( BITD ); /* assert LO data */
|
|
bt848->i2c_data_ctl = 2;
|
|
DELAY( BITD ); /* strobe clock */
|
|
bt848->i2c_data_ctl = 0;
|
|
DELAY( BITD ); /* release clock */
|
|
}
|
|
}
|
|
|
|
/* look for an ACK */
|
|
bt848->i2c_data_ctl = 1; DELAY( BITD ); /* float data */
|
|
bt848->i2c_data_ctl = 3; DELAY( BITD ); /* strobe clock */
|
|
status = bt848->i2c_data_ctl & 1; /* read the ACK bit */
|
|
bt848->i2c_data_ctl = 1; DELAY( BITD ); /* release clock */
|
|
|
|
/* the STOP */
|
|
bt848->i2c_data_ctl = 0; DELAY( BITD ); /* lower clock & data */
|
|
bt848->i2c_data_ctl = 2; DELAY( BITD ); /* release clock */
|
|
bt848->i2c_data_ctl = 3; DELAY( BITD ); /* release data */
|
|
|
|
return( status );
|
|
}
|
|
#undef EXTRA_START
|
|
#undef BITD
|
|
|
|
#endif /* I2C_SOFTWARE_PROBE */
|
|
|
|
|
|
/*
|
|
*
|
|
*/
|
|
static int
|
|
writeEEProm( bktr_ptr_t bktr, int offset, int count, u_char *data )
|
|
{
|
|
return( -1 );
|
|
}
|
|
|
|
|
|
/*
|
|
*
|
|
*/
|
|
static int
|
|
readEEProm( bktr_ptr_t bktr, int offset, int count, u_char *data )
|
|
{
|
|
int x;
|
|
int addr;
|
|
int max;
|
|
int byte;
|
|
|
|
/* get the address of the EEProm */
|
|
addr = (int)(bktr->card.eepromAddr & 0xff);
|
|
if ( addr == 0 )
|
|
return( -1 );
|
|
|
|
max = (int)(bktr->card.eepromSize * EEPROMBLOCKSIZE);
|
|
if ( (offset + count) > max )
|
|
return( -1 );
|
|
|
|
/* set the start address */
|
|
if ( i2cWrite( bktr, addr, offset, -1 ) == -1 )
|
|
return( -1 );
|
|
|
|
/* the read cycle */
|
|
for ( x = 0; x < count; ++x ) {
|
|
if ( (byte = i2cRead( bktr, (addr | 1) )) == -1 )
|
|
return( -1 );
|
|
data[ x ] = byte;
|
|
}
|
|
|
|
return( 0 );
|
|
}
|
|
|
|
|
|
/******************************************************************************
|
|
* card probe
|
|
*/
|
|
|
|
|
|
/*
|
|
* the recognized cards, used as indexes of several tables.
|
|
*
|
|
* if probeCard() fails to detect the proper card on boot you can
|
|
* override it by setting the following define to the card you are using:
|
|
*
|
|
#define OVERRIDE_CARD <card type>
|
|
*
|
|
* where <card type> is one of the following card defines.
|
|
*/
|
|
#define CARD_UNKNOWN 0
|
|
#define CARD_MIRO 1
|
|
#define CARD_HAUPPAUGE 2
|
|
#define CARD_STB 3
|
|
#define CARD_INTEL 4
|
|
|
|
/*
|
|
* the data for each type of card
|
|
*
|
|
* Note:
|
|
* these entried MUST be kept in the order defined by the CARD_XXX defines!
|
|
*/
|
|
const struct CARDTYPE cards[] = {
|
|
|
|
/* CARD_UNKNOWN */
|
|
{ "Unknown", /* the 'name' */
|
|
NULL, /* the tuner */
|
|
0, /* dbx unknown */
|
|
0, /* EEProm unknown */
|
|
0, /* EEProm unknown */
|
|
{ 0, 0, 0, 0, 0 } },
|
|
|
|
/* CARD_MIRO */
|
|
{ "Miro TV", /* the 'name' */
|
|
NULL, /* the tuner */
|
|
0, /* dbx unknown */
|
|
0, /* EEProm unknown */
|
|
0, /* size unknown */
|
|
{ 0x02, 0x01, 0x00, 0x00, 1 } }, /* XXX ??? */
|
|
|
|
/* CARD_HAUPPAUGE */
|
|
{ "Hauppauge WinCast/TV", /* the 'name' */
|
|
NULL, /* the tuner */
|
|
0, /* dbx is optional */
|
|
PFC8582_WADDR, /* EEProm type */
|
|
(u_char)(256 / EEPROMBLOCKSIZE), /* 256 bytes */
|
|
{ 0x00, 0x02, 0x01, 0x01, 1 } }, /* audio MUX values */
|
|
|
|
/* CARD_STB */
|
|
{ "STB TV/PCI", /* the 'name' */
|
|
NULL, /* the tuner */
|
|
0, /* dbx is optional */
|
|
X24C01_WADDR, /* EEProm type */
|
|
(u_char)(128 / EEPROMBLOCKSIZE), /* 128 bytes */
|
|
{ 0x00, 0x01, 0x02, 0x02, 1 } }, /* audio MUX values */
|
|
|
|
/* CARD_INTEL */
|
|
{ "Intel Smart Video III", /* the 'name' */
|
|
NULL, /* the tuner */
|
|
0,
|
|
0,
|
|
0,
|
|
{ 0, 0, 0, 0, 0 } }
|
|
};
|
|
|
|
|
|
/*
|
|
* the data for each type of tuner
|
|
*/
|
|
|
|
/* indexes into tuners[] */
|
|
#define NO_TUNER 0
|
|
#define TEMIC_NTSC 1
|
|
#define TEMIC_PAL 2
|
|
#define TEMIC_SECAM 3
|
|
#define PHILIPS_NTSC 4
|
|
#define PHILIPS_PAL 5
|
|
#define PHILIPS_SECAM 6
|
|
/* XXX FIXME: this list is incomplete */
|
|
|
|
/* input types */
|
|
#define TTYPE_XXX 0
|
|
#define TTYPE_NTSC 1
|
|
#define TTYPE_NTSC_J 2
|
|
#define TTYPE_PAL 3
|
|
#define TTYPE_PAL_M 4
|
|
#define TTYPE_PAL_N 5
|
|
#define TTYPE_SECAM 6
|
|
|
|
/**
|
|
struct TUNER {
|
|
char* name;
|
|
u_char type;
|
|
u_char pllAddr;
|
|
u_char pllControl;
|
|
u_char bandLimits[ 2 ];
|
|
u_char bandAddrs[ 3 ];
|
|
};
|
|
*/
|
|
const struct TUNER tuners[] = {
|
|
/* XXX FIXME: fill in the band-switch crosspoints */
|
|
/* NO_TUNER */
|
|
{ "<none>", /* the 'name' */
|
|
TTYPE_XXX, /* input type */
|
|
0x00, /* PLL write address */
|
|
0x00, /* control byte for PLL */
|
|
{ 0x00, 0x00 }, /* band-switch crosspoints */
|
|
{ 0x00, 0x00, 0x00 } }, /* the band-switch values */
|
|
|
|
/* TEMIC_NTSC */
|
|
{ "Temic NTSC", /* the 'name' */
|
|
TTYPE_NTSC, /* input type */
|
|
TEMIC_NTSC_WADDR, /* PLL write address */
|
|
TSA552x_SCONTROL, /* control byte for PLL */
|
|
{ 0x00, 0x00 }, /* band-switch crosspoints */
|
|
{ 0x02, 0x04, 0x01 } }, /* the band-switch values */
|
|
|
|
/* TEMIC_PAL */
|
|
{ "Temic PAL", /* the 'name' */
|
|
TTYPE_PAL, /* input type */
|
|
TEMIC_PALI_WADDR, /* PLL write address */
|
|
TSA552x_SCONTROL, /* control byte for PLL */
|
|
{ 0x00, 0x00 }, /* band-switch crosspoints */
|
|
{ 0x02, 0x04, 0x01 } }, /* the band-switch values */
|
|
|
|
/* TEMIC_SECAM */
|
|
{ "Temic SECAM", /* the 'name' */
|
|
TTYPE_SECAM, /* input type */
|
|
0x00, /* PLL write address */
|
|
TSA552x_SCONTROL, /* control byte for PLL */
|
|
{ 0x00, 0x00 }, /* band-switch crosspoints */
|
|
{ 0x02, 0x04, 0x01 } }, /* the band-switch values */
|
|
|
|
/* PHILIPS_NTSC */
|
|
{ "Philips NTSC", /* the 'name' */
|
|
TTYPE_NTSC, /* input type */
|
|
PHILIPS_NTSC_WADDR, /* PLL write address */
|
|
TSA552x_SCONTROL, /* control byte for PLL */
|
|
{ 0x00, 0x00 }, /* band-switch crosspoints */
|
|
{ 0xa0, 0x90, 0x30 } }, /* the band-switch values */
|
|
|
|
/* PHILIPS_PAL */
|
|
{ "Philips PAL", /* the 'name' */
|
|
TTYPE_PAL, /* input type */
|
|
0x00, /* PLL write address */
|
|
TSA552x_SCONTROL, /* control byte for PLL */
|
|
{ 0x00, 0x00 }, /* band-switch crosspoints */
|
|
{ 0xa0, 0x90, 0x30 } }, /* the band-switch values */
|
|
|
|
/* PHILIPS_SECAM */
|
|
{ "Philips SECAM", /* the 'name' */
|
|
TTYPE_SECAM, /* input type */
|
|
0x00, /* PLL write address */
|
|
TSA552x_SCONTROL, /* control byte for PLL */
|
|
{ 0x00, 0x00 }, /* band-switch crosspoints */
|
|
{ 0xa0, 0x90, 0x30 } } /* the band-switch values */
|
|
};
|
|
|
|
|
|
/*
|
|
* get a signature of the card
|
|
* read all 128 possible i2c read addresses from 0x01 thru 0xff
|
|
* build a bit array with a 1 bit for each i2c device that responds
|
|
*
|
|
* XXX FIXME: use offset & count args
|
|
*/
|
|
#define ABSENT (-1)
|
|
static int
|
|
signCard( bktr_ptr_t bktr, int offset, int count, u_char* sig )
|
|
{
|
|
int x;
|
|
|
|
for ( x = 0; x < 16; ++x )
|
|
sig[ x ] = 0;
|
|
|
|
for ( x = 0; x < 128; ++x ) {
|
|
if ( i2cRead( bktr, (2 * x) + 1 ) != ABSENT ) {
|
|
sig[ x / 8 ] |= (1 << (x % 8) );
|
|
}
|
|
}
|
|
|
|
return( 0 );
|
|
}
|
|
#undef ABSENT
|
|
|
|
|
|
/*
|
|
* determine the card brand/model
|
|
*/
|
|
#define ABSENT (-1)
|
|
static void
|
|
probeCard( bktr_ptr_t bktr, int verbose )
|
|
{
|
|
int card;
|
|
int status;
|
|
|
|
#if defined( OVERRIDE_CARD )
|
|
bktr->card = cards[ (card = OVERRIDE_CARD) ];
|
|
goto checkTuner;
|
|
#endif
|
|
|
|
/* look for a tuner */
|
|
if ( i2cRead( bktr, TSA552x_RADDR ) == ABSENT ) {
|
|
bktr->card = cards[ (card = CARD_INTEL) ];
|
|
bktr->card.tuner = &tuners[ NO_TUNER ];
|
|
goto checkDBX;
|
|
}
|
|
|
|
/* look for a hauppauge card */
|
|
if ( (status = i2cRead( bktr, PFC8582_RADDR )) != ABSENT ) {
|
|
bktr->card = cards[ (card = CARD_HAUPPAUGE) ];
|
|
goto checkTuner;
|
|
}
|
|
|
|
/* look for an STB card */
|
|
if ( (status = i2cRead( bktr, X24C01_RADDR )) != ABSENT ) {
|
|
bktr->card = cards[ (card = CARD_STB) ];
|
|
goto checkTuner;
|
|
}
|
|
|
|
/* XXX FIXME: (how do I) look for a Miro card */
|
|
bktr->card = cards[ (card = CARD_MIRO) ];
|
|
|
|
checkTuner:
|
|
/* differentiate type of tuner */
|
|
if ( i2cRead( bktr, TEMIC_NTSC_RADDR ) != ABSENT ) {
|
|
bktr->card.tuner = &tuners[ TEMIC_NTSC ];
|
|
goto checkDBX;
|
|
}
|
|
|
|
if ( i2cRead( bktr, PHILIPS_NTSC_RADDR ) != ABSENT ) {
|
|
bktr->card.tuner = &tuners[ PHILIPS_NTSC ];
|
|
goto checkDBX;
|
|
}
|
|
#if defined( TEST_PAL )
|
|
/** WARNING: this is a test */
|
|
if ( card == CARD_HAUPPAUGE ) {
|
|
if ( i2cRead( bktr, TEMIC_PALI_RADDR ) != ABSENT ) {
|
|
bktr->card.tuner = &tuners[ TEMIC_PAL ];
|
|
goto checkDBX;
|
|
}
|
|
}
|
|
#endif /* TEST_PAL */
|
|
|
|
/* no tuner found */
|
|
bktr->card.tuner = &tuners[ NO_TUNER ];
|
|
|
|
checkDBX:
|
|
/* probe for BTSC (dbx) chips */
|
|
if ( i2cRead( bktr, TDA9850_RADDR ) != ABSENT )
|
|
bktr->card.dbx = 1;
|
|
|
|
if ( verbose ) {
|
|
printf( "%s", bktr->card.name );
|
|
if ( bktr->card.tuner )
|
|
printf( ", %s tuner", bktr->card.tuner->name );
|
|
if ( bktr->card.dbx )
|
|
printf( ", dbx stereo" );
|
|
printf( ".\n" );
|
|
}
|
|
}
|
|
#undef ABSENT
|
|
|
|
|
|
/******************************************************************************
|
|
* tuner specific routines:
|
|
*/
|
|
|
|
|
|
/* scaling factor for frequencies expressed as ints */
|
|
#define FREQFACTOR 16
|
|
|
|
/*
|
|
* Format:
|
|
* entry 0: MAX legal channel
|
|
* entry 1: IF frequency
|
|
* expressed as fi{mHz} * 16,
|
|
* eg 45.75mHz == 45.75 * 16 = 732
|
|
* entry 2: [place holder/future]
|
|
* entry 3: base of channel record 0
|
|
* entry 3 + (x*3): base of channel record 'x'
|
|
* entry LAST: NULL channel entry marking end of records
|
|
*
|
|
* Record:
|
|
* int 0: base channel
|
|
* int 1: frequency of base channel,
|
|
* expressed as fb{mHz} * 16,
|
|
* int 2: offset frequency between channels,
|
|
* expressed as fo{mHz} * 16,
|
|
*/
|
|
|
|
/*
|
|
* North American Broadcast Channels:
|
|
*
|
|
* 2: 55.25 mHz - 4: 67.25 mHz
|
|
* 5: 77.25 mHz - 6: 83.25 mHz
|
|
* 7: 175.25 mHz - 13: 211.25 mHz
|
|
* 14: 471.25 mHz - 83: 885.25 mHz
|
|
*
|
|
* IF freq: 45.75 mHz
|
|
*/
|
|
#define OFFSET 6.00
|
|
int nabcst[] = {
|
|
83, (int)( 45.75 * FREQFACTOR), 0,
|
|
14, (int)(471.25 * FREQFACTOR), (int)(OFFSET * FREQFACTOR),
|
|
7, (int)(175.25 * FREQFACTOR), (int)(OFFSET * FREQFACTOR),
|
|
5, (int)( 77.25 * FREQFACTOR), (int)(OFFSET * FREQFACTOR),
|
|
2, (int)( 55.25 * FREQFACTOR), (int)(OFFSET * FREQFACTOR),
|
|
0
|
|
};
|
|
#undef OFFSET
|
|
|
|
/*
|
|
* North American Cable Channels, IRC:
|
|
*
|
|
* 2: 55.25 mHz - 4: 67.25 mHz
|
|
* 5: 77.25 mHz - 6: 83.25 mHz
|
|
* 7: 175.25 mHz - 13: 211.25 mHz
|
|
* 14: 121.25 mHz - 22: 169.25 mHz
|
|
* 23: 217.25 mHz - 94: 643.25 mHz
|
|
* 95: 91.25 mHz - 99: 115.25 mHz
|
|
*
|
|
* IF freq: 45.75 mHz
|
|
*/
|
|
#define OFFSET 6.00
|
|
int irccable[] = {
|
|
99, (int)( 45.75 * FREQFACTOR), 0,
|
|
95, (int)( 91.25 * FREQFACTOR), (int)(OFFSET * FREQFACTOR),
|
|
23, (int)(217.25 * FREQFACTOR), (int)(OFFSET * FREQFACTOR),
|
|
14, (int)(121.25 * FREQFACTOR), (int)(OFFSET * FREQFACTOR),
|
|
7, (int)(175.25 * FREQFACTOR), (int)(OFFSET * FREQFACTOR),
|
|
5, (int)( 77.25 * FREQFACTOR), (int)(OFFSET * FREQFACTOR),
|
|
2, (int)( 55.25 * FREQFACTOR), (int)(OFFSET * FREQFACTOR),
|
|
0
|
|
};
|
|
#undef OFFSET
|
|
|
|
/*
|
|
* North American Cable Channels, HRC:
|
|
*/
|
|
int hrccable[] = {
|
|
0, 0, 0,
|
|
0
|
|
};
|
|
|
|
/*
|
|
* Western European broadcast channels:
|
|
*
|
|
* (there are others that appear to vary between countries - rmt)
|
|
*
|
|
* here's the table Philips provides:
|
|
* caution, some of the offsets don't compute...
|
|
*
|
|
* 1 4525 700 N21
|
|
*
|
|
* 2 4825 700 E2
|
|
* 3 5525 700 E3
|
|
* 4 6225 700 E4
|
|
*
|
|
* 5 17525 700 E5
|
|
* 6 18225 700 E6
|
|
* 7 18925 700 E7
|
|
* 8 19625 700 E8
|
|
* 9 20325 700 E9
|
|
* 10 21025 700 E10
|
|
* 11 21725 700 E11
|
|
* 12 22425 700 E12
|
|
*
|
|
* 13 5375 700 ITA
|
|
* 14 6225 700 ITB
|
|
*
|
|
* 15 8225 700 ITC
|
|
*
|
|
* 16 17525 700 ITD
|
|
* 17 18325 700 ITE
|
|
*
|
|
* 18 19225 700 ITF
|
|
* 19 20125 700 ITG
|
|
* 20 21025 700 ITH
|
|
*
|
|
* 21 47125 800 E21
|
|
* 22 47925 800 E22
|
|
* 23 48725 800 E23
|
|
* 24 49525 800 E24
|
|
* 25 50325 800 E25
|
|
* 26 51125 800 E26
|
|
* 27 51925 800 E27
|
|
* 28 52725 800 E28
|
|
* 29 53525 800 E29
|
|
* 30 54325 800 E30
|
|
* 31 55125 800 E31
|
|
* 32 55925 800 E32
|
|
* 33 56725 800 E33
|
|
* 34 57525 800 E34
|
|
* 35 58325 800 E35
|
|
* 36 59125 800 E36
|
|
* 37 59925 800 E37
|
|
* 38 60725 800 E38
|
|
* 39 61525 800 E39
|
|
* 40 62325 800 E40
|
|
* 41 63125 800 E41
|
|
* 42 63925 800 E42
|
|
* 43 64725 800 E43
|
|
* 44 65525 800 E44
|
|
* 45 66325 800 E45
|
|
* 46 67125 800 E46
|
|
* 47 67925 800 E47
|
|
* 48 68725 800 E48
|
|
* 49 69525 800 E49
|
|
* 50 70325 800 E50
|
|
* 51 71125 800 E51
|
|
* 52 71925 800 E52
|
|
* 53 72725 800 E53
|
|
* 54 73525 800 E54
|
|
* 55 74325 800 E55
|
|
* 56 75125 800 E56
|
|
* 57 75925 800 E57
|
|
* 58 76725 800 E58
|
|
* 59 77525 800 E59
|
|
* 60 78325 800 E60
|
|
* 61 79125 800 E61
|
|
* 62 79925 800 E62
|
|
* 63 80725 800 E63
|
|
* 64 81525 800 E64
|
|
* 65 82325 800 E65
|
|
* 66 83125 800 E66
|
|
* 67 83925 800 E67
|
|
* 68 84725 800 E68
|
|
* 69 85525 800 E69
|
|
*
|
|
* 70 4575 800 IA
|
|
* 71 5375 800 IB
|
|
* 72 6175 800 IC
|
|
*
|
|
* 74 6925 700 S01
|
|
* 75 7625 700 S02
|
|
* 76 8325 700 S03
|
|
*
|
|
* 80 10525 700 S1
|
|
* 81 11225 700 S2
|
|
* 82 11925 700 S3
|
|
* 83 12625 700 S4
|
|
* 84 13325 700 S5
|
|
* 85 14025 700 S6
|
|
* 86 14725 700 S7
|
|
* 87 15425 700 S8
|
|
* 88 16125 700 S9
|
|
* 89 16825 700 S10
|
|
* 90 23125 700 S11
|
|
* 91 23825 700 S12
|
|
* 92 24525 700 S13
|
|
* 93 25225 700 S14
|
|
* 94 25925 700 S15
|
|
* 95 26625 700 S16
|
|
* 96 27325 700 S17
|
|
* 97 28025 700 S18
|
|
* 98 28725 700 S19
|
|
* 99 29425 700 S20
|
|
*
|
|
* 100 3890 000 IFFREQ
|
|
*
|
|
*/
|
|
int weurope[] = {
|
|
100, (int)( 38.90 * FREQFACTOR), 0,
|
|
90, (int)(231.25 * FREQFACTOR), (int)(7.00 * FREQFACTOR),
|
|
80, (int)(105.25 * FREQFACTOR), (int)(7.00 * FREQFACTOR),
|
|
74, (int)( 69.25 * FREQFACTOR), (int)(7.00 * FREQFACTOR),
|
|
21, (int)(471.25 * FREQFACTOR), (int)(8.00 * FREQFACTOR),
|
|
17, (int)(183.25 * FREQFACTOR), (int)(9.00 * FREQFACTOR),
|
|
16, (int)(175.25 * FREQFACTOR), (int)(9.00 * FREQFACTOR),
|
|
15, (int)(82.25 * FREQFACTOR), (int)(8.50 * FREQFACTOR),
|
|
13, (int)(53.75 * FREQFACTOR), (int)(8.50 * FREQFACTOR),
|
|
5, (int)(175.25 * FREQFACTOR), (int)(7.00 * FREQFACTOR),
|
|
2, (int)(48.25 * FREQFACTOR), (int)(7.00 * FREQFACTOR),
|
|
0
|
|
};
|
|
|
|
/*
|
|
* Japanese Broadcast Channels:
|
|
*
|
|
* 1: 91.25MHz - 3: 103.25MHz
|
|
* 4: 171.25MHz - 7: 189.25MHz
|
|
* 8: 193.25MHz - 12: 217.25MHz (VHF)
|
|
* 13: 471.25MHz - 62: 765.25MHz (UHF)
|
|
*
|
|
* IF freq: 45.75 mHz
|
|
* OR
|
|
* IF freq: 58.75 mHz
|
|
*/
|
|
#define OFFSET 6.00
|
|
#define IF_FREQ 45.75
|
|
int jpnbcst[] = {
|
|
62, (int)(IF_FREQ * FREQFACTOR), 0,
|
|
13, (int)(471.25 * FREQFACTOR), (int)(OFFSET * FREQFACTOR),
|
|
8, (int)(193.25 * FREQFACTOR), (int)(OFFSET * FREQFACTOR),
|
|
4, (int)(171.25 * FREQFACTOR), (int)(OFFSET * FREQFACTOR),
|
|
1, (int)( 91.25 * FREQFACTOR), (int)(OFFSET * FREQFACTOR),
|
|
0
|
|
};
|
|
#undef IF_FREQ
|
|
#undef OFFSET
|
|
|
|
|
|
int* freqTable[] = {
|
|
NULL,
|
|
nabcst,
|
|
irccable,
|
|
hrccable,
|
|
weurope,
|
|
jpnbcst
|
|
};
|
|
|
|
|
|
#define TBL_CHNL freqTable[ bktr->tuner.chnlset ][ x ]
|
|
#define TBL_BASE_FREQ freqTable[ bktr->tuner.chnlset ][ x + 1 ]
|
|
#define TBL_OFFSET freqTable[ bktr->tuner.chnlset ][ x + 2 ]
|
|
static int
|
|
frequency_lookup( bktr_ptr_t bktr, int channel )
|
|
{
|
|
int x;
|
|
|
|
/* check for "> MAX channel" */
|
|
x = 0;
|
|
if ( channel > TBL_CHNL )
|
|
return( -1 );
|
|
|
|
/* search the table for data */
|
|
for ( x = 3; TBL_CHNL; x += 3 ) {
|
|
if ( channel >= TBL_CHNL ) {
|
|
return( TBL_BASE_FREQ +
|
|
((channel - TBL_CHNL) * TBL_OFFSET) );
|
|
}
|
|
}
|
|
|
|
/* not found, must be below the MIN channel */
|
|
return( -1 );
|
|
}
|
|
#undef TBL_OFFSET
|
|
#undef TBL_BASE_FREQ
|
|
#undef TBL_CHNL
|
|
|
|
|
|
#define TBL_IF freqTable[ bktr->tuner.chnlset ][ 1 ]
|
|
/*
|
|
* set the frequency of the tuner
|
|
*/
|
|
static int
|
|
tv_freq( bktr_ptr_t bktr, int frequency )
|
|
{
|
|
const struct TUNER* tuner;
|
|
u_char addr;
|
|
u_char control;
|
|
u_char band;
|
|
int N;
|
|
|
|
tuner = bktr->card.tuner;
|
|
if ( tuner == NULL )
|
|
return( -1 );
|
|
|
|
/*
|
|
* select the band based on frequency
|
|
* XXX FIXME: get the cross-over points from the tuner struct
|
|
*/
|
|
if ( frequency < (160 * FREQFACTOR) )
|
|
band = tuner->bandAddrs[ 0 ];
|
|
else if ( frequency < (454 * FREQFACTOR) )
|
|
band = tuner->bandAddrs[ 1 ];
|
|
else
|
|
band = tuner->bandAddrs[ 2 ];
|
|
|
|
/* set the address of the PLL */
|
|
addr = tuner->pllAddr;
|
|
control = tuner->pllControl;
|
|
|
|
/*
|
|
* N = 16 * { fRF(pc) + fIF(pc) }
|
|
* where:
|
|
* pc is picture carrier, fRF & fIF are in mHz
|
|
*
|
|
* frequency was passed in as mHz * 16
|
|
*/
|
|
#if defined( TEST_TUNER_AFC )
|
|
if ( bktr->tuner.afc )
|
|
frequency -= 4;
|
|
#endif
|
|
N = frequency + TBL_IF;
|
|
|
|
if ( frequency > bktr->tuner.frequency ) {
|
|
i2cWrite( bktr, addr, (N>>8) & 0x7f, N & 0xff );
|
|
i2cWrite( bktr, addr, control, band );
|
|
}
|
|
else {
|
|
i2cWrite( bktr, addr, control, band );
|
|
i2cWrite( bktr, addr, (N>>8) & 0x7f, N & 0xff );
|
|
}
|
|
|
|
#if defined( TUNER_AFC )
|
|
if ( bktr->tuner.afc == TRUE ) {
|
|
if ( (N = do_afc( bktr, addr, N )) < 0 ) {
|
|
/* AFC failed, restore requested frequency */
|
|
N = frequency + TBL_IF;
|
|
i2cWrite( bktr, addr, (N>>8) & 0x7f, N & 0xff );
|
|
}
|
|
else
|
|
frequency = N - TBL_IF;
|
|
}
|
|
#endif /* TUNER_AFC */
|
|
|
|
/* update frequency */
|
|
bktr->tuner.frequency = frequency;
|
|
|
|
return( 0 );
|
|
}
|
|
|
|
#if defined( TUNER_AFC )
|
|
/*
|
|
*
|
|
*/
|
|
static int
|
|
do_afc( bktr_ptr_t bktr, int addr, int frequency )
|
|
{
|
|
int step;
|
|
int status;
|
|
int origFrequency;
|
|
|
|
origFrequency = frequency;
|
|
|
|
/* wait for first setting to take effect */
|
|
tsleep( (caddr_t)bktr, PZERO, "tuning", hz/8 );
|
|
|
|
if ( (status = i2cRead( bktr, addr + 1 )) < 0 )
|
|
return( -1 );
|
|
|
|
#if defined( TEST_TUNER_AFC )
|
|
printf( "\nOriginal freq: %d, status: 0x%02x\n", frequency, status );
|
|
#endif
|
|
for ( step = 0; step < AFC_MAX_STEP; ++step ) {
|
|
if ( (status = i2cRead( bktr, addr + 1 )) < 0 )
|
|
goto fubar;
|
|
if ( !(status & 0x40) ) {
|
|
#if defined( TEST_TUNER_AFC )
|
|
printf( "no lock!\n" );
|
|
#endif
|
|
goto fubar;
|
|
}
|
|
|
|
switch( status & AFC_BITS ) {
|
|
case AFC_FREQ_CENTERED:
|
|
#if defined( TEST_TUNER_AFC )
|
|
printf( "Centered, freq: %d, status: 0x%02x\n", frequency, status );
|
|
#endif
|
|
return( frequency );
|
|
|
|
case AFC_FREQ_MINUS_125:
|
|
case AFC_FREQ_MINUS_62:
|
|
#if defined( TEST_TUNER_AFC )
|
|
printf( "Low, freq: %d, status: 0x%02x\n", frequency, status );
|
|
#endif
|
|
--frequency;
|
|
break;
|
|
|
|
case AFC_FREQ_PLUS_62:
|
|
case AFC_FREQ_PLUS_125:
|
|
#if defined( TEST_TUNER_AFC )
|
|
printf( "Hi, freq: %d, status: 0x%02x\n", frequency, status );
|
|
#endif
|
|
++frequency;
|
|
break;
|
|
}
|
|
|
|
i2cWrite( bktr, addr,
|
|
(frequency>>8) & 0x7f, frequency & 0xff );
|
|
DELAY( AFC_DELAY );
|
|
}
|
|
|
|
fubar:
|
|
i2cWrite( bktr, addr,
|
|
(origFrequency>>8) & 0x7f, origFrequency & 0xff );
|
|
|
|
return( -1 );
|
|
}
|
|
#endif /* TUNER_AFC */
|
|
#undef TBL_IF
|
|
|
|
|
|
/*
|
|
* set the channel of the tuner
|
|
*/
|
|
static int
|
|
tv_channel( bktr_ptr_t bktr, int channel )
|
|
{
|
|
int frequency;
|
|
|
|
/* calculate the frequency according to tuner type */
|
|
if ( (frequency = frequency_lookup( bktr, channel )) < 0 )
|
|
return( -1 );
|
|
|
|
/* set the new frequency */
|
|
if ( tv_freq( bktr, frequency ) < 0 )
|
|
return( -1 );
|
|
|
|
/* OK to update records */
|
|
return( (bktr->tuner.channel = channel) );
|
|
}
|
|
|
|
|
|
/******************************************************************************
|
|
* audio specific routines:
|
|
*/
|
|
|
|
|
|
/*
|
|
*
|
|
*/
|
|
#define AUDIOMUX_DISCOVER_NOT
|
|
static int
|
|
set_audio( bktr_ptr_t bktr, int cmd )
|
|
{
|
|
bt848_ptr_t bt848;
|
|
u_long temp;
|
|
volatile u_char idx;
|
|
|
|
#if defined( AUDIOMUX_DISCOVER )
|
|
if ( cmd >= 200 )
|
|
cmd -= 200;
|
|
else
|
|
#endif /* AUDIOMUX_DISCOVER */
|
|
|
|
/* check for existance of audio MUXes */
|
|
if ( !bktr->card.audiomuxs[ 4 ] )
|
|
return( -1 );
|
|
|
|
switch (cmd) {
|
|
case AUDIO_TUNER:
|
|
bktr->audio_mux_select = 0;
|
|
break;
|
|
case AUDIO_EXTERN:
|
|
bktr->audio_mux_select = 1;
|
|
break;
|
|
case AUDIO_INTERN:
|
|
bktr->audio_mux_select = 2;
|
|
break;
|
|
case AUDIO_MUTE:
|
|
bktr->audio_mute_state = TRUE; /* set mute */
|
|
break;
|
|
case AUDIO_UNMUTE:
|
|
bktr->audio_mute_state = FALSE; /* clear mute */
|
|
break;
|
|
default:
|
|
printf("bktr: audio cmd error %02x\n", cmd);
|
|
return( -1 );
|
|
}
|
|
|
|
bt848 = bktr->base;
|
|
|
|
/*
|
|
* Leave the upper bits of the GPIO port alone in case they control
|
|
* something like the dbx or teletext chips. This doesn't guarantee
|
|
* success, but follows the rule of least astonishment.
|
|
*/
|
|
|
|
/* XXX FIXME: this was an 8 bit reference before new struct ??? */
|
|
bt848->gpio_reg_inp = (~GPIO_AUDIOMUX_BITS & 0xff);
|
|
|
|
if ( bktr->audio_mute_state == TRUE )
|
|
idx = 3;
|
|
else
|
|
idx = bktr->audio_mux_select;
|
|
|
|
temp = bt848->gpio_data & ~GPIO_AUDIOMUX_BITS;
|
|
bt848->gpio_data =
|
|
#if defined( AUDIOMUX_DISCOVER )
|
|
bt848->gpio_data = temp | (cmd & 0xff);
|
|
printf("cmd: %d\n", cmd );
|
|
#else
|
|
temp | bktr->card.audiomuxs[ idx ];
|
|
#endif /* AUDIOMUX_DISCOVER */
|
|
|
|
return( 0 );
|
|
}
|
|
|
|
|
|
/*
|
|
*
|
|
*/
|
|
static void
|
|
temp_mute( bktr_ptr_t bktr, int flag )
|
|
{
|
|
static int muteState = FALSE;
|
|
|
|
if ( flag == TRUE ) {
|
|
muteState = bktr->audio_mute_state;
|
|
set_audio( bktr, AUDIO_MUTE ); /* prevent 'click' */
|
|
}
|
|
else {
|
|
tsleep( (caddr_t)bktr, PZERO, "tuning", hz/8 );
|
|
if ( muteState == FALSE )
|
|
set_audio( bktr, AUDIO_UNMUTE );
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
* setup the dbx chip
|
|
* XXX FIXME: alot of work to be done here, this merely unmutes it.
|
|
*/
|
|
static int
|
|
set_BTSC( bktr_ptr_t bktr, int control )
|
|
{
|
|
return( i2cWrite( bktr, TDA9850_WADDR, CON3ADDR, control ) );
|
|
}
|
|
|
|
|
|
/******************************************************************************
|
|
* magic:
|
|
*/
|
|
|
|
|
|
#ifdef __FreeBSD__
|
|
static bktr_devsw_installed = 0;
|
|
|
|
static void
|
|
bktr_drvinit( void *unused )
|
|
{
|
|
dev_t dev;
|
|
|
|
if ( ! bktr_devsw_installed ) {
|
|
dev = makedev(CDEV_MAJOR, 0);
|
|
cdevsw_add(&dev,&bktr_cdevsw, NULL);
|
|
bktr_devsw_installed = 1;
|
|
}
|
|
}
|
|
|
|
SYSINIT(bktrdev,SI_SUB_DRIVERS,SI_ORDER_MIDDLE+CDEV_MAJOR,bktr_drvinit,NULL)
|
|
|
|
#endif /* __FreeBSD__ */
|
|
#endif /* !defined(__FreeBSD__) || (NBKTR > 0 && NPCI > 0) */
|
|
|
|
/* Local Variables: */
|
|
/* mode: C */
|
|
/* c-indent-level: 8 */
|
|
/* c-brace-offset: -8 */
|
|
/* c-argdecl-indent: 8 */
|
|
/* c-label-offset: -8 */
|
|
/* c-continued-statement-offset: 8 */
|
|
/* c-tab-always-indent: nil */
|
|
/* End: */
|