d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
freebsd-skq/sys/dev
History
Adrian Chadd 4473d4da67 Add the 11n chipset RF frontends to the linker set, even though they're not 
attached this way.

The AR5212 based NICs have a variety of RF frontends, so there's a linker set
which the AR5212 attach routine calls. The same framework is used for the
AR5416 and later but as there's a fixed RF frontend for each 11n NIC, it
is just directly attached.

However in the case of compiling a cut down HAL (eg _just_ AR9130 WMAC support),
the linker set ends up being empty and this causes the compile to fail.

So this is just a workaround for that - it means those users who wish an 11n
only HAL can compile the 11n chipsets and RF frontend they need, and just
"ath_ar5212" for the AR5212/AR5416 common code, and it'll just work.

Sponsored by:	Hobnob, Inc.
2011-12-15 00:59:11 +00:00
..
aac
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
acpi_support
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
acpica
Prevent a division by zero with some broken batteries
2011-11-26 13:43:50 +00:00
adb
Add support for special keys (volume/brightness/eject) on Apple laptops with
2011-10-16 21:01:42 +00:00
adlink
…
advansys
…
ae
To send a frame, controller requires a prepended TX header and
2011-11-11 19:15:32 +00:00
age
Close a race where SIOCGIFMEDIA ioctl get inconsistent link status.
2011-10-17 19:49:00 +00:00
agp
Do a sweep of the tree replacing calls to pci_find_extcap() with calls to
2011-03-23 13:10:15 +00:00
aha
…
ahb
…
ahci
Add hw.ahci.force tunable to control whether AHCI drivers should attach
2011-12-02 12:52:33 +00:00
aic
…
aic7xxx
Improve portability #defines for compiling aicasm on other systems.
2011-07-15 00:36:47 +00:00
alc
Close a race where SIOCGIFMEDIA ioctl get inconsistent link status.
2011-10-17 19:49:00 +00:00
ale
Close a race where SIOCGIFMEDIA ioctl get inconsistent link status.
2011-10-17 19:49:00 +00:00
amdsbwd
amdsbwd: update to support SB8xx southbridges
2011-06-07 06:18:02 +00:00
amdtemp
…
amr
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
an
Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
2011-11-07 15:43:11 +00:00
arcmsr
- Just use cam_calc_geometry(9) on newer version of FreeBSD rather than
2011-11-23 21:43:51 +00:00
asmc
…
asr
Merge from r225950:
2011-10-13 20:06:19 +00:00
ata
Add PCI IDs for the Intel ICH9M SATA controllers.
2011-12-14 13:12:55 +00:00
ath
Add the 11n chipset RF frontends to the linker set, even though they're not
2011-12-15 00:59:11 +00:00
atkbdc
Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
2011-11-07 15:43:11 +00:00
auxio
…
bce
Rework link state tracking and remove superfluous link UP/DOWN
2011-12-13 18:11:25 +00:00
bfe
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
bge
Destroy DMA tag for jumbo RX buffer in device detach.
2011-12-13 20:31:57 +00:00
bktr
Remove a few bits of FreeBSD 2.x compatibility code.
2011-11-14 18:21:27 +00:00
bm
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
buslogic
…
bwi
Fix an incorrect use of sizeof().
2011-10-10 02:54:58 +00:00
bwn
- fix typo
2011-12-10 21:05:06 +00:00
bxe
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
cardbus
Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
2011-11-07 15:43:11 +00:00
cas
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
ce
…
cesa
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
cfe
Follow up to r225203 refining break-to-debugger run-time configuration
2011-08-27 14:24:27 +00:00
cfi
Merge r221614,221696,221737,221840 from largeSMP project branch:
2011-05-22 20:55:54 +00:00
ciss
Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.
2011-11-07 06:44:47 +00:00
cm
Replace inline static' by static inline'.
2011-12-13 14:06:01 +00:00
cmx
…
coretemp
#PROCHOT assertion is sticky after reading the MSR (accordingly with
2011-09-19 10:58:30 +00:00
cp
…
cpuctl
Add VIA microde update support to cpuctl(4) and cpucontrol(8).
2011-12-12 12:30:44 +00:00
cpufreq
…
cs
Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
2011-11-07 15:43:11 +00:00
ct
…
ctau
…
cx
…
cxgb
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
cxgbe
Do not clobber the ingress queue's congestion setting.
2011-12-14 05:34:23 +00:00
cy
…
dc
Use DEVMETHOD_END.
2011-11-23 20:27:26 +00:00
dcons
Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
2011-11-07 15:43:11 +00:00
de
Replace inline static' by static inline'.
2011-12-13 14:06:01 +00:00
digi
…
dpms
…
dpt
…
drm
Do not define bool/true/false if the symbols already exist.
2011-12-12 18:43:24 +00:00
e1000
Consistently use types in e1000 driver code:
2011-12-12 18:27:34 +00:00
ed
Fix off by one error in mbuf access. Previously it caused panic.
2011-12-05 18:10:43 +00:00
eisa
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
en
Remove duplicate header includes
2011-06-28 08:36:48 +00:00
ep
…
esp
s,KOBJMETHOD_END,DEVMETHOD_END,g in order to fully hide the explicit mention
2011-11-22 21:55:40 +00:00
et
FreeBSD driver does not require arpcom structure in softc.
2011-12-09 23:37:55 +00:00
ex
…
exca
…
fatm
…
fb
- Add support for ASCII art splash screens in TheDraw format
2011-12-12 21:12:07 +00:00
fdc
Replace inline static' by static inline'.
2011-12-13 14:06:01 +00:00
fdt
Fix OF_finddevice error return value in case of FDT.
2011-12-02 15:24:39 +00:00
fe
…
firewire
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
flash
…
fxp
- Follow the lead of dcphy(4) and pnphy(4) and move the reminder of the PHY
2011-10-08 12:33:10 +00:00
gem
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
glxiic
Fix breakage on pc98 by redefining DEBUG().
2011-05-15 19:04:08 +00:00
glxsb
…
gpio
Modify the GPIO i2c bus code to allow for arbitrary data/clock
2011-12-04 12:10:24 +00:00
hatm
…
hifn
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
hme
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
hptiop
- Just use cam_calc_geometry(9) on newer version of FreeBSD rather than
2011-11-23 21:43:51 +00:00
hptmv
- Just use cam_calc_geometry(9) on newer version of FreeBSD rather than
2011-11-23 21:43:51 +00:00
hptrr
- Just use cam_calc_geometry(9) on newer version of FreeBSD rather than
2011-11-23 21:43:51 +00:00
hwpmc
There's a small set of events on Nehalem, that are not supported in
2011-12-12 13:12:55 +00:00
ic
…
ichsmb
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
ichwd
Fix a bug in ichwd(4) which prevents it from beig enabled if the new
2011-09-02 17:06:50 +00:00
ida
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
ie
…
ieee488
…
if_ndis
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
iicbus
Allow the i2c node requirements to be slightly relaxed.
2011-12-04 11:55:33 +00:00
iir
Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.
2011-11-07 06:44:47 +00:00
io
…
ipmi
Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
2011-11-07 15:43:11 +00:00
ips
…
ipw
Add module version to iwi/ipw/wpi and iwn.
2011-05-31 19:08:25 +00:00
iscsi/initiator
Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.
2011-11-07 06:44:47 +00:00
isp
Fix few bugs in isp(4) target mode support:
2011-12-13 09:58:05 +00:00
ispfw
…
iwi
Add module version to iwi/ipw/wpi and iwn.
2011-05-31 19:08:25 +00:00
iwn
The DC calibration result obtained during initialization can't be
2011-11-21 22:19:12 +00:00
ixgb
…
ixgbe
Consistently use types in ixgbe driver code:
2011-12-12 18:27:28 +00:00
jme
- Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP
2011-05-03 19:51:29 +00:00
joy
…
kbd
Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
2011-11-07 15:43:11 +00:00
kbdmux
Restore binary compatibility for GIO_KEYMAP and PIO_KEYMAP.
2011-07-17 08:19:19 +00:00
ksyms
Get rid of D_PSEUDO.
2011-10-18 08:09:44 +00:00
le
Make sparc64 compatible with NEW_PCIB and enable it:
2011-10-02 23:22:38 +00:00
led
MFgraid/head r218174:
2011-03-24 08:56:12 +00:00
lge
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
lindev
…
lmc
In r191367 the need for if_free_type() was removed and a new member
2011-11-11 22:57:52 +00:00
malo
Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
2011-11-07 15:43:11 +00:00
mc146818
…
mca
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
mcd
…
md
Document a large number of currently undocumented sysctls. While here
2011-12-13 00:38:50 +00:00
mem
…
mfi
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
mge
…
mii
- In mii_attach(9) just set the driver for a newly added miibus(4) instance
2011-12-05 21:38:45 +00:00
mk48txx
Add support for MK48T37.
2011-05-15 13:17:08 +00:00
mlx
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
mly
Add descriptor sense support to CAM, and honor sense residuals properly in
2011-10-03 20:32:55 +00:00
mmc
Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
2011-11-07 15:43:11 +00:00
mn
…
mps
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
mpt
Increase the IOC port initialization timeouts by ten times to what the
2011-11-01 18:28:33 +00:00
mse
…
msk
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
mvs
Rename device_delete_all_children() into device_delete_children().
2011-11-22 21:56:55 +00:00
mwl
Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
2011-11-07 15:43:11 +00:00
mxge
Update mxge(4) firmware to the latest version available from
2011-07-12 15:07:17 +00:00
my
Remove duplicate header includes
2011-06-28 08:36:48 +00:00
ncv
…
netmap
revise the implementation of the rings connected to the host stack
2011-12-05 15:21:21 +00:00
nfe
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
nge
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
nmdm
Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.
2011-11-07 06:44:47 +00:00
nsp
…
null
Move the ZERO_REGION_SIZE to a machine-dependent file, as on many
2011-05-13 19:35:01 +00:00
nve
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
nvram
…
nvram2env
Import nvram2env, a device driver which imports various NVRAM-style
2011-04-03 11:55:48 +00:00
nxge
…
ofw
Fix OF_finddevice error return value in case of FDT.
2011-12-02 15:24:39 +00:00
patm
…
pbio
…
pccard
Replace inline static' by static inline'.
2011-12-13 14:06:01 +00:00
pccbb
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
pcf
…
pci
Implement BUS_ADD_CHILD() for the isab(4) driver. It already calls
2011-12-14 12:34:02 +00:00
pcn
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
pdq
…
powermac_nvram
…
ppbus
Rename device_delete_all_children() into device_delete_children().
2011-11-22 21:56:55 +00:00
ppc
Rename device_delete_all_children() into device_delete_children().
2011-11-22 21:56:55 +00:00
pst
…
pty
Fix whitespace inconsistencies in the TTY layer and its drivers owned by me.
2011-06-26 18:26:20 +00:00
puc
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
qlxgb
The maximum TSO frame size should be:
2011-11-16 02:00:55 +00:00
quicc
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
ral
Don't hardcode assumptions about basic rates, similar to what the rt2661
2011-04-09 14:45:50 +00:00
random
…
rc
…
re
add netmap support for "em", "lem", "igb" and "re".
2011-12-05 15:33:13 +00:00
rndtest
Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
2011-11-07 15:43:11 +00:00
rp
…
rt
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
safe
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
sbni
…
scc
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
scd
…
sdhci
Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
2011-11-07 15:43:11 +00:00
sec
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
sf
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
sfxge
sfxge: Add $FreeBSD$ tags to common code files.
2011-11-28 17:19:05 +00:00
sge
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
si
…
siba
Rename device_delete_all_children() into device_delete_children().
2011-11-22 21:56:55 +00:00
siis
Rename device_delete_all_children() into device_delete_children().
2011-11-22 21:56:55 +00:00
sio
- add support for Broadcom 802.11bg/EDGE/GPRS CardBus (Serial)
2011-11-15 17:15:09 +00:00
sis
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
sk
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
smbus
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
smc
- Import the common MII bitbang'ing code from NetBSD and convert drivers to
2011-11-01 16:13:59 +00:00
sn
…
snc
…
snp
Second-to-last commit implementing Capsicum capabilities in the FreeBSD
2011-08-11 12:30:23 +00:00
sound
Use usbd_transfer_unsetup() instead of usbd_transfer_stop() so that
2011-12-14 01:03:07 +00:00
speaker
Do not define bool/true/false if the symbols already exist.
2011-12-12 18:43:24 +00:00
spibus
Replace inline static' by static inline'.
2011-12-13 14:06:01 +00:00
ste
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
stg
…
stge
s,KOBJMETHOD_END,DEVMETHOD_END,g in order to fully hide the explicit mention
2011-11-22 21:55:40 +00:00
streams
Add the fo_chown and fo_chmod methods to struct fileops and use them
2011-08-16 20:07:47 +00:00
sym
Merge from r225950:
2011-10-07 08:59:54 +00:00
syscons
syscons: make sc_puts static as it is used only privately
2011-12-11 21:10:11 +00:00
tdfx
Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.
2011-11-07 06:44:47 +00:00
ti
Overhaul bus_dma(9) usage in driver:
2011-11-14 20:38:14 +00:00
tl
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
tpm
…
trm
…
tsec
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
twa
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
twe
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
tws
Do not define bool/true/false if the symbols already exist.
2011-12-12 18:43:24 +00:00
tx
- Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP
2011-05-03 19:51:29 +00:00
txp
Do a sweep of the tree replacing calls to pci_find_extcap() with calls to
2011-03-23 13:10:15 +00:00
uart
Replace __const by const in all non-contributed source code.
2011-12-13 13:32:56 +00:00
ubsec
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
usb
Improve fix for random USB transfer time out.
2011-12-14 22:14:05 +00:00
utopia
…
vge
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
viawd
Rework the attachement to probe directly on isab(4).
2011-12-14 15:39:51 +00:00
virtio
Catch up with Bryan Venteicher's virtio Hg repo:
2011-12-06 06:28:32 +00:00
vkbd
Get rid of D_PSEUDO.
2011-10-18 08:09:44 +00:00
vr
Announce flow control capability to PHY drivers and enable flow
2011-11-28 19:03:59 +00:00
vte
Remove unused variable mii.
2011-11-23 05:34:01 +00:00
vx
…
vxge
Do not define bool/true/false if the symbols already exist.
2011-12-12 18:43:24 +00:00
watchdog
- Add the possibility to reuse the already last used timeout when patting
2011-04-27 16:43:03 +00:00
wb
- There's no need to overwrite the default device method with the default
2011-11-22 21:28:20 +00:00
wds
…
wi
Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
2011-11-07 15:43:11 +00:00
wl
…
wpi
Add module version to iwi/ipw/wpi and iwn.
2011-05-31 19:08:25 +00:00
xe
Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
2011-11-07 15:43:11 +00:00
xen
Replace inline static' by static inline'.
2011-12-13 14:06:01 +00:00
xl
Use DEVMETHOD_END.
2011-11-23 20:27:26 +00:00