5446f85d9d
* Migrate the rx_params stuff out from ieee80211_freebsd.h where it doesn't belong - this isn't freebsd specific anymore. * Don't use a hard-coded number of chains in the ioctl header; now we can shuffle MAX_CHAINS around so it can be used in the right spot. * Extend the signal/noisefloor levels in the mimo stats struct to userland to include the signal and noisefloor levels for each 20MHz slice of a 160MHz channel. * Bump the number of EVM pilots in preparation for 4x4 and 160MHz channels. Tested: * ath(4), STA mode * iwn(4), STA mode * local ath10k port, STA mode TODO: * 11ax chips will come with 5GHz 8x8 hardware for lots of MU-MIMO - I'll re-bump it at that point. Note: * This breaks the driver and ifconfig ABI; please recompile the kernel, ifconfig and wpa_supplicant/hostapd.
626 lines
25 KiB
C
626 lines
25 KiB
C
/*-
|
|
* Copyright (c) 2001 Atsushi Onoe
|
|
* Copyright (c) 2002-2008 Sam Leffler, Errno Consulting
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
#ifndef _NET80211__IEEE80211_H_
|
|
#define _NET80211__IEEE80211_H_
|
|
|
|
/*
|
|
* 802.11 implementation definitions.
|
|
*
|
|
* NB: this file is used by applications.
|
|
*/
|
|
|
|
/*
|
|
* PHY type; mostly used to identify FH phys.
|
|
*/
|
|
enum ieee80211_phytype {
|
|
IEEE80211_T_DS, /* direct sequence spread spectrum */
|
|
IEEE80211_T_FH, /* frequency hopping */
|
|
IEEE80211_T_OFDM, /* frequency division multiplexing */
|
|
IEEE80211_T_TURBO, /* high rate OFDM, aka turbo mode */
|
|
IEEE80211_T_HT, /* high throughput */
|
|
IEEE80211_T_OFDM_HALF, /* 1/2 rate OFDM */
|
|
IEEE80211_T_OFDM_QUARTER, /* 1/4 rate OFDM */
|
|
IEEE80211_T_VHT, /* VHT PHY */
|
|
};
|
|
#define IEEE80211_T_CCK IEEE80211_T_DS /* more common nomenclature */
|
|
|
|
/*
|
|
* PHY mode; this is not really a mode as multi-mode devices
|
|
* have multiple PHY's. Mode is mostly used as a shorthand
|
|
* for constraining which channels to consider in setting up
|
|
* operation. Modes used to be used more extensively when
|
|
* channels were identified as IEEE channel numbers.
|
|
*/
|
|
enum ieee80211_phymode {
|
|
IEEE80211_MODE_AUTO = 0, /* autoselect */
|
|
IEEE80211_MODE_11A = 1, /* 5GHz, OFDM */
|
|
IEEE80211_MODE_11B = 2, /* 2GHz, CCK */
|
|
IEEE80211_MODE_11G = 3, /* 2GHz, OFDM */
|
|
IEEE80211_MODE_FH = 4, /* 2GHz, GFSK */
|
|
IEEE80211_MODE_TURBO_A = 5, /* 5GHz, OFDM, 2x clock */
|
|
IEEE80211_MODE_TURBO_G = 6, /* 2GHz, OFDM, 2x clock */
|
|
IEEE80211_MODE_STURBO_A = 7, /* 5GHz, OFDM, 2x clock, static */
|
|
IEEE80211_MODE_11NA = 8, /* 5GHz, w/ HT */
|
|
IEEE80211_MODE_11NG = 9, /* 2GHz, w/ HT */
|
|
IEEE80211_MODE_HALF = 10, /* OFDM, 1/2x clock */
|
|
IEEE80211_MODE_QUARTER = 11, /* OFDM, 1/4x clock */
|
|
IEEE80211_MODE_VHT_2GHZ = 12, /* 2GHz, VHT */
|
|
IEEE80211_MODE_VHT_5GHZ = 13, /* 5GHz, VHT */
|
|
};
|
|
#define IEEE80211_MODE_MAX (IEEE80211_MODE_VHT_5GHZ+1)
|
|
#define IEEE80211_MODE_BYTES howmany(IEEE80211_MODE_MAX, NBBY)
|
|
|
|
/*
|
|
* Operating mode. Devices do not necessarily support
|
|
* all modes; they indicate which are supported in their
|
|
* capabilities.
|
|
*/
|
|
enum ieee80211_opmode {
|
|
IEEE80211_M_IBSS = 0, /* IBSS (adhoc) station */
|
|
IEEE80211_M_STA = 1, /* infrastructure station */
|
|
IEEE80211_M_WDS = 2, /* WDS link */
|
|
IEEE80211_M_AHDEMO = 3, /* Old lucent compatible adhoc demo */
|
|
IEEE80211_M_HOSTAP = 4, /* Software Access Point */
|
|
IEEE80211_M_MONITOR = 5, /* Monitor mode */
|
|
IEEE80211_M_MBSS = 6, /* MBSS (Mesh Point) link */
|
|
};
|
|
#define IEEE80211_OPMODE_MAX (IEEE80211_M_MBSS+1)
|
|
|
|
/*
|
|
* 802.11g/802.11n protection mode.
|
|
*/
|
|
enum ieee80211_protmode {
|
|
IEEE80211_PROT_NONE = 0, /* no protection */
|
|
IEEE80211_PROT_CTSONLY = 1, /* CTS to self */
|
|
IEEE80211_PROT_RTSCTS = 2, /* RTS-CTS */
|
|
};
|
|
|
|
/*
|
|
* Authentication mode. The open and shared key authentication
|
|
* modes are implemented within the 802.11 layer. 802.1x and
|
|
* WPA/802.11i are implemented in user mode by setting the
|
|
* 802.11 layer into IEEE80211_AUTH_8021X and deferring
|
|
* authentication to user space programs.
|
|
*/
|
|
enum ieee80211_authmode {
|
|
IEEE80211_AUTH_NONE = 0,
|
|
IEEE80211_AUTH_OPEN = 1, /* open */
|
|
IEEE80211_AUTH_SHARED = 2, /* shared-key */
|
|
IEEE80211_AUTH_8021X = 3, /* 802.1x */
|
|
IEEE80211_AUTH_AUTO = 4, /* auto-select/accept */
|
|
/* NB: these are used only for ioctls */
|
|
IEEE80211_AUTH_WPA = 5, /* WPA/RSN w/ 802.1x/PSK */
|
|
};
|
|
|
|
/*
|
|
* Roaming mode is effectively who controls the operation
|
|
* of the 802.11 state machine when operating as a station.
|
|
* State transitions are controlled either by the driver
|
|
* (typically when management frames are processed by the
|
|
* hardware/firmware), the host (auto/normal operation of
|
|
* the 802.11 layer), or explicitly through ioctl requests
|
|
* when applications like wpa_supplicant want control.
|
|
*/
|
|
enum ieee80211_roamingmode {
|
|
IEEE80211_ROAMING_DEVICE= 0, /* driver/hardware control */
|
|
IEEE80211_ROAMING_AUTO = 1, /* 802.11 layer control */
|
|
IEEE80211_ROAMING_MANUAL= 2, /* application control */
|
|
};
|
|
|
|
/*
|
|
* Channels are specified by frequency and attributes.
|
|
*/
|
|
struct ieee80211_channel {
|
|
uint32_t ic_flags; /* see below */
|
|
uint16_t ic_freq; /* primary centre frequency in MHz */
|
|
uint8_t ic_ieee; /* IEEE channel number */
|
|
int8_t ic_maxregpower; /* maximum regulatory tx power in dBm */
|
|
int8_t ic_maxpower; /* maximum tx power in .5 dBm */
|
|
int8_t ic_minpower; /* minimum tx power in .5 dBm */
|
|
uint8_t ic_state; /* dynamic state */
|
|
uint8_t ic_extieee; /* HT40 extension channel number */
|
|
int8_t ic_maxantgain; /* maximum antenna gain in .5 dBm */
|
|
uint8_t ic_pad;
|
|
uint16_t ic_devdata; /* opaque device/driver data */
|
|
uint8_t ic_vht_ch_freq1; /* VHT primary freq1 IEEE value */
|
|
uint8_t ic_vht_ch_freq2; /* VHT secondary 80MHz freq2 IEEE value */
|
|
uint16_t ic_freq2; /* VHT secondary 80MHz freq2 MHz */
|
|
};
|
|
|
|
/*
|
|
* Note: for VHT operation we will need significantly more than
|
|
* IEEE80211_CHAN_MAX channels because of the combinations of
|
|
* VHT20, VHT40, VHT80, VHT80+80 and VHT160.
|
|
*/
|
|
#define IEEE80211_CHAN_MAX 1024
|
|
#define IEEE80211_CHAN_BYTES howmany(IEEE80211_CHAN_MAX, NBBY)
|
|
#define IEEE80211_CHAN_ANY 0xffff /* token for ``any channel'' */
|
|
#define IEEE80211_CHAN_ANYC \
|
|
((struct ieee80211_channel *) IEEE80211_CHAN_ANY)
|
|
|
|
/* channel attributes */
|
|
#define IEEE80211_CHAN_PRIV0 0x00000001 /* driver private bit 0 */
|
|
#define IEEE80211_CHAN_PRIV1 0x00000002 /* driver private bit 1 */
|
|
#define IEEE80211_CHAN_PRIV2 0x00000004 /* driver private bit 2 */
|
|
#define IEEE80211_CHAN_PRIV3 0x00000008 /* driver private bit 3 */
|
|
#define IEEE80211_CHAN_TURBO 0x00000010 /* Turbo channel */
|
|
#define IEEE80211_CHAN_CCK 0x00000020 /* CCK channel */
|
|
#define IEEE80211_CHAN_OFDM 0x00000040 /* OFDM channel */
|
|
#define IEEE80211_CHAN_2GHZ 0x00000080 /* 2 GHz spectrum channel. */
|
|
#define IEEE80211_CHAN_5GHZ 0x00000100 /* 5 GHz spectrum channel */
|
|
#define IEEE80211_CHAN_PASSIVE 0x00000200 /* Only passive scan allowed */
|
|
#define IEEE80211_CHAN_DYN 0x00000400 /* Dynamic CCK-OFDM channel */
|
|
#define IEEE80211_CHAN_GFSK 0x00000800 /* GFSK channel (FHSS PHY) */
|
|
#define IEEE80211_CHAN_GSM 0x00001000 /* 900 MHz spectrum channel */
|
|
#define IEEE80211_CHAN_STURBO 0x00002000 /* 11a static turbo channel only */
|
|
#define IEEE80211_CHAN_HALF 0x00004000 /* Half rate channel */
|
|
#define IEEE80211_CHAN_QUARTER 0x00008000 /* Quarter rate channel */
|
|
#define IEEE80211_CHAN_HT20 0x00010000 /* HT 20 channel */
|
|
#define IEEE80211_CHAN_HT40U 0x00020000 /* HT 40 channel w/ ext above */
|
|
#define IEEE80211_CHAN_HT40D 0x00040000 /* HT 40 channel w/ ext below */
|
|
#define IEEE80211_CHAN_DFS 0x00080000 /* DFS required */
|
|
#define IEEE80211_CHAN_4MSXMIT 0x00100000 /* 4ms limit on frame length */
|
|
#define IEEE80211_CHAN_NOADHOC 0x00200000 /* adhoc mode not allowed */
|
|
#define IEEE80211_CHAN_NOHOSTAP 0x00400000 /* hostap mode not allowed */
|
|
#define IEEE80211_CHAN_11D 0x00800000 /* 802.11d required */
|
|
#define IEEE80211_CHAN_VHT20 0x01000000 /* VHT20 channel */
|
|
#define IEEE80211_CHAN_VHT40U 0x02000000 /* VHT40 channel, ext above */
|
|
#define IEEE80211_CHAN_VHT40D 0x04000000 /* VHT40 channel, ext below */
|
|
#define IEEE80211_CHAN_VHT80 0x08000000 /* VHT80 channel */
|
|
#define IEEE80211_CHAN_VHT80_80 0x10000000 /* VHT80+80 channel */
|
|
#define IEEE80211_CHAN_VHT160 0x20000000 /* VHT160 channel */
|
|
/* XXX note: 0x80000000 is used in src/sbin/ifconfig/ifieee80211.c :( */
|
|
|
|
#define IEEE80211_CHAN_HT40 (IEEE80211_CHAN_HT40U | IEEE80211_CHAN_HT40D)
|
|
#define IEEE80211_CHAN_HT (IEEE80211_CHAN_HT20 | IEEE80211_CHAN_HT40)
|
|
|
|
#define IEEE80211_CHAN_VHT40 (IEEE80211_CHAN_VHT40U | IEEE80211_CHAN_VHT40D)
|
|
#define IEEE80211_CHAN_VHT (IEEE80211_CHAN_VHT20 | IEEE80211_CHAN_VHT40 \
|
|
| IEEE80211_CHAN_VHT80 | IEEE80211_CHAN_VHT80_80 \
|
|
| IEEE80211_CHAN_VHT160)
|
|
|
|
#define IEEE80211_CHAN_BITS \
|
|
"\20\1PRIV0\2PRIV2\3PRIV3\4PRIV4\5TURBO\6CCK\7OFDM\0102GHZ\0115GHZ" \
|
|
"\12PASSIVE\13DYN\14GFSK\15GSM\16STURBO\17HALF\20QUARTER\21HT20" \
|
|
"\22HT40U\23HT40D\24DFS\0254MSXMIT\26NOADHOC\27NOHOSTAP\03011D" \
|
|
"\031VHT20\032VHT40U\033VHT40D\034VHT80\035VHT80_80\036VHT160"
|
|
|
|
/*
|
|
* Useful combinations of channel characteristics.
|
|
*/
|
|
#define IEEE80211_CHAN_FHSS \
|
|
(IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_GFSK)
|
|
#define IEEE80211_CHAN_A \
|
|
(IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_OFDM)
|
|
#define IEEE80211_CHAN_B \
|
|
(IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_CCK)
|
|
#define IEEE80211_CHAN_PUREG \
|
|
(IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_OFDM)
|
|
#define IEEE80211_CHAN_G \
|
|
(IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_DYN)
|
|
#define IEEE80211_CHAN_108A \
|
|
(IEEE80211_CHAN_A | IEEE80211_CHAN_TURBO)
|
|
#define IEEE80211_CHAN_108G \
|
|
(IEEE80211_CHAN_PUREG | IEEE80211_CHAN_TURBO)
|
|
#define IEEE80211_CHAN_ST \
|
|
(IEEE80211_CHAN_108A | IEEE80211_CHAN_STURBO)
|
|
|
|
#define IEEE80211_CHAN_ALL \
|
|
(IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_GFSK | \
|
|
IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_DYN | \
|
|
IEEE80211_CHAN_HALF | IEEE80211_CHAN_QUARTER | \
|
|
IEEE80211_CHAN_HT | IEEE80211_CHAN_VHT)
|
|
#define IEEE80211_CHAN_ALLTURBO \
|
|
(IEEE80211_CHAN_ALL | IEEE80211_CHAN_TURBO | IEEE80211_CHAN_STURBO)
|
|
|
|
#define IEEE80211_IS_CHAN_FHSS(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_FHSS) == IEEE80211_CHAN_FHSS)
|
|
#define IEEE80211_IS_CHAN_A(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_A) == IEEE80211_CHAN_A)
|
|
#define IEEE80211_IS_CHAN_B(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_B) == IEEE80211_CHAN_B)
|
|
#define IEEE80211_IS_CHAN_PUREG(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_PUREG) == IEEE80211_CHAN_PUREG)
|
|
#define IEEE80211_IS_CHAN_G(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_G) == IEEE80211_CHAN_G)
|
|
#define IEEE80211_IS_CHAN_ANYG(_c) \
|
|
(IEEE80211_IS_CHAN_PUREG(_c) || IEEE80211_IS_CHAN_G(_c))
|
|
#define IEEE80211_IS_CHAN_ST(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_ST) == IEEE80211_CHAN_ST)
|
|
#define IEEE80211_IS_CHAN_108A(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_108A) == IEEE80211_CHAN_108A)
|
|
#define IEEE80211_IS_CHAN_108G(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_108G) == IEEE80211_CHAN_108G)
|
|
|
|
#define IEEE80211_IS_CHAN_2GHZ(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_2GHZ) != 0)
|
|
#define IEEE80211_IS_CHAN_5GHZ(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_5GHZ) != 0)
|
|
#define IEEE80211_IS_CHAN_PASSIVE(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_PASSIVE) != 0)
|
|
#define IEEE80211_IS_CHAN_OFDM(_c) \
|
|
(((_c)->ic_flags & (IEEE80211_CHAN_OFDM | IEEE80211_CHAN_DYN)) != 0)
|
|
#define IEEE80211_IS_CHAN_CCK(_c) \
|
|
(((_c)->ic_flags & (IEEE80211_CHAN_CCK | IEEE80211_CHAN_DYN)) != 0)
|
|
#define IEEE80211_IS_CHAN_DYN(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_DYN) == IEEE80211_CHAN_DYN)
|
|
#define IEEE80211_IS_CHAN_GFSK(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_GFSK) != 0)
|
|
#define IEEE80211_IS_CHAN_TURBO(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_TURBO) != 0)
|
|
#define IEEE80211_IS_CHAN_STURBO(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_STURBO) != 0)
|
|
#define IEEE80211_IS_CHAN_DTURBO(_c) \
|
|
(((_c)->ic_flags & \
|
|
(IEEE80211_CHAN_TURBO | IEEE80211_CHAN_STURBO)) == IEEE80211_CHAN_TURBO)
|
|
#define IEEE80211_IS_CHAN_HALF(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_HALF) != 0)
|
|
#define IEEE80211_IS_CHAN_QUARTER(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_QUARTER) != 0)
|
|
#define IEEE80211_IS_CHAN_FULL(_c) \
|
|
(((_c)->ic_flags & (IEEE80211_CHAN_QUARTER | IEEE80211_CHAN_HALF)) == 0)
|
|
#define IEEE80211_IS_CHAN_GSM(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_GSM) != 0)
|
|
#define IEEE80211_IS_CHAN_HT(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_HT) != 0)
|
|
#define IEEE80211_IS_CHAN_HT20(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_HT20) != 0)
|
|
#define IEEE80211_IS_CHAN_HT40(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_HT40) != 0)
|
|
#define IEEE80211_IS_CHAN_HT40U(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_HT40U) != 0)
|
|
#define IEEE80211_IS_CHAN_HT40D(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_HT40D) != 0)
|
|
#define IEEE80211_IS_CHAN_HTA(_c) \
|
|
(IEEE80211_IS_CHAN_5GHZ(_c) && \
|
|
((_c)->ic_flags & IEEE80211_CHAN_HT) != 0)
|
|
#define IEEE80211_IS_CHAN_HTG(_c) \
|
|
(IEEE80211_IS_CHAN_2GHZ(_c) && \
|
|
((_c)->ic_flags & IEEE80211_CHAN_HT) != 0)
|
|
#define IEEE80211_IS_CHAN_DFS(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_DFS) != 0)
|
|
#define IEEE80211_IS_CHAN_NOADHOC(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_NOADHOC) != 0)
|
|
#define IEEE80211_IS_CHAN_NOHOSTAP(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_NOHOSTAP) != 0)
|
|
#define IEEE80211_IS_CHAN_11D(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_11D) != 0)
|
|
|
|
#define IEEE80211_IS_CHAN_VHT(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_VHT) != 0)
|
|
#define IEEE80211_IS_CHAN_VHT_2GHZ(_c) \
|
|
(IEEE80211_IS_CHAN_2GHZ(_c) && \
|
|
((_c)->ic_flags & IEEE80211_CHAN_VHT) != 0)
|
|
#define IEEE80211_IS_CHAN_VHT_5GHZ(_c) \
|
|
(IEEE80211_IS_CHAN_5GHZ(_c) && \
|
|
((_c)->ic_flags & IEEE80211_CHAN_VHT) != 0)
|
|
#define IEEE80211_IS_CHAN_VHT20(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_VHT20) != 0)
|
|
#define IEEE80211_IS_CHAN_VHT40(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_VHT40) != 0)
|
|
#define IEEE80211_IS_CHAN_VHT40U(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_VHT40U) != 0)
|
|
#define IEEE80211_IS_CHAN_VHT40D(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_VHT40D) != 0)
|
|
#define IEEE80211_IS_CHAN_VHTA(_c) \
|
|
(IEEE80211_IS_CHAN_5GHZ(_c) && \
|
|
((_c)->ic_flags & IEEE80211_CHAN_VHT) != 0)
|
|
#define IEEE80211_IS_CHAN_VHTG(_c) \
|
|
(IEEE80211_IS_CHAN_2GHZ(_c) && \
|
|
((_c)->ic_flags & IEEE80211_CHAN_VHT) != 0)
|
|
#define IEEE80211_IS_CHAN_VHT80(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_VHT80) != 0)
|
|
#define IEEE80211_IS_CHAN_VHT80_80(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_VHT80_80) != 0)
|
|
#define IEEE80211_IS_CHAN_VHT160(_c) \
|
|
(((_c)->ic_flags & IEEE80211_CHAN_VHT160) != 0)
|
|
|
|
#define IEEE80211_CHAN2IEEE(_c) (_c)->ic_ieee
|
|
|
|
/* dynamic state */
|
|
#define IEEE80211_CHANSTATE_RADAR 0x01 /* radar detected */
|
|
#define IEEE80211_CHANSTATE_CACDONE 0x02 /* CAC completed */
|
|
#define IEEE80211_CHANSTATE_CWINT 0x04 /* interference detected */
|
|
#define IEEE80211_CHANSTATE_NORADAR 0x10 /* post notify on radar clear */
|
|
|
|
#define IEEE80211_IS_CHAN_RADAR(_c) \
|
|
(((_c)->ic_state & IEEE80211_CHANSTATE_RADAR) != 0)
|
|
#define IEEE80211_IS_CHAN_CACDONE(_c) \
|
|
(((_c)->ic_state & IEEE80211_CHANSTATE_CACDONE) != 0)
|
|
#define IEEE80211_IS_CHAN_CWINT(_c) \
|
|
(((_c)->ic_state & IEEE80211_CHANSTATE_CWINT) != 0)
|
|
|
|
/* ni_chan encoding for FH phy */
|
|
#define IEEE80211_FH_CHANMOD 80
|
|
#define IEEE80211_FH_CHAN(set,pat) (((set)-1)*IEEE80211_FH_CHANMOD+(pat))
|
|
#define IEEE80211_FH_CHANSET(chan) ((chan)/IEEE80211_FH_CHANMOD+1)
|
|
#define IEEE80211_FH_CHANPAT(chan) ((chan)%IEEE80211_FH_CHANMOD)
|
|
|
|
#define IEEE80211_TID_SIZE (WME_NUM_TID+1) /* WME TID's +1 for non-QoS */
|
|
#define IEEE80211_NONQOS_TID WME_NUM_TID /* index for non-QoS sta */
|
|
|
|
/*
|
|
* The 802.11 spec says at most 2007 stations may be
|
|
* associated at once. For most AP's this is way more
|
|
* than is feasible so we use a default of 128. This
|
|
* number may be overridden by the driver and/or by
|
|
* user configuration but may not be less than IEEE80211_AID_MIN.
|
|
*/
|
|
#define IEEE80211_AID_DEF 128
|
|
#define IEEE80211_AID_MIN 16
|
|
|
|
/*
|
|
* 802.11 rate set.
|
|
*/
|
|
#define IEEE80211_RATE_SIZE 8 /* 802.11 standard */
|
|
#define IEEE80211_RATE_MAXSIZE 15 /* max rates we'll handle */
|
|
|
|
struct ieee80211_rateset {
|
|
uint8_t rs_nrates;
|
|
uint8_t rs_rates[IEEE80211_RATE_MAXSIZE];
|
|
};
|
|
|
|
/*
|
|
* 802.11n variant of ieee80211_rateset. Instead of
|
|
* legacy rates the entries are MCS rates. We define
|
|
* the structure such that it can be used interchangeably
|
|
* with an ieee80211_rateset (modulo structure size).
|
|
*/
|
|
#define IEEE80211_HTRATE_MAXSIZE 77
|
|
|
|
struct ieee80211_htrateset {
|
|
uint8_t rs_nrates;
|
|
uint8_t rs_rates[IEEE80211_HTRATE_MAXSIZE];
|
|
};
|
|
|
|
#define IEEE80211_RATE_MCS 0x80
|
|
|
|
/*
|
|
* Per-mode transmit parameters/controls visible to user space.
|
|
* These can be used to set fixed transmit rate for all operating
|
|
* modes or on a per-client basis according to the capabilities
|
|
* of the client (e.g. an 11b client associated to an 11g ap).
|
|
*
|
|
* MCS are distinguished from legacy rates by or'ing in 0x80.
|
|
*/
|
|
struct ieee80211_txparam {
|
|
uint8_t ucastrate; /* ucast data rate (legacy/MCS|0x80) */
|
|
uint8_t mgmtrate; /* mgmt frame rate (legacy/MCS|0x80) */
|
|
uint8_t mcastrate; /* multicast rate (legacy/MCS|0x80) */
|
|
uint8_t maxretry; /* max unicast data retry count */
|
|
};
|
|
|
|
/*
|
|
* Per-mode roaming state visible to user space. There are two
|
|
* thresholds that control whether roaming is considered; when
|
|
* either is exceeded the 802.11 layer will check the scan cache
|
|
* for another AP. If the cache is stale then a scan may be
|
|
* triggered.
|
|
*/
|
|
struct ieee80211_roamparam {
|
|
int8_t rssi; /* rssi thresh (.5 dBm) */
|
|
uint8_t rate; /* tx rate thresh (.5 Mb/s or MCS) */
|
|
uint16_t pad; /* reserve */
|
|
};
|
|
|
|
/*
|
|
* Regulatory Information.
|
|
*/
|
|
struct ieee80211_regdomain {
|
|
uint16_t regdomain; /* SKU */
|
|
uint16_t country; /* ISO country code */
|
|
uint8_t location; /* I (indoor), O (outdoor), other */
|
|
uint8_t ecm; /* Extended Channel Mode */
|
|
char isocc[2]; /* country code string */
|
|
short pad[2];
|
|
};
|
|
|
|
/*
|
|
* MIMO antenna/radio state.
|
|
*/
|
|
#define IEEE80211_MAX_CHAINS 4
|
|
/*
|
|
* This is the number of sub-channels for a channel.
|
|
* 0 - pri20
|
|
* 1 - sec20 (HT40, VHT40)
|
|
* 2 - sec40 (VHT80)
|
|
* 3 - sec80 (VHT80+80, VHT160)
|
|
*/
|
|
#define IEEE80211_MAX_CHAIN_PRISEC 4
|
|
#define IEEE80211_MAX_EVM_DWORDS 16 /* 16 pilots, 4 chains */
|
|
#define IEEE80211_MAX_EVM_PILOTS 16 /* 468 subcarriers, 16 pilots */
|
|
|
|
struct ieee80211_mimo_chan_info {
|
|
int8_t rssi[IEEE80211_MAX_CHAIN_PRISEC];
|
|
int8_t noise[IEEE80211_MAX_CHAIN_PRISEC];
|
|
};
|
|
|
|
struct ieee80211_mimo_info {
|
|
struct ieee80211_mimo_chan_info ch[IEEE80211_MAX_CHAINS];
|
|
uint32_t evm[IEEE80211_MAX_EVM_DWORDS];
|
|
};
|
|
|
|
/*
|
|
* ic_caps/iv_caps: device driver capabilities
|
|
*/
|
|
/* 0x2e available */
|
|
#define IEEE80211_C_STA 0x00000001 /* CAPABILITY: STA available */
|
|
#define IEEE80211_C_8023ENCAP 0x00000002 /* CAPABILITY: 802.3 encap */
|
|
#define IEEE80211_C_FF 0x00000040 /* CAPABILITY: ATH FF avail */
|
|
#define IEEE80211_C_TURBOP 0x00000080 /* CAPABILITY: ATH Turbo avail*/
|
|
#define IEEE80211_C_IBSS 0x00000100 /* CAPABILITY: IBSS available */
|
|
#define IEEE80211_C_PMGT 0x00000200 /* CAPABILITY: Power mgmt */
|
|
#define IEEE80211_C_HOSTAP 0x00000400 /* CAPABILITY: HOSTAP avail */
|
|
#define IEEE80211_C_AHDEMO 0x00000800 /* CAPABILITY: Old Adhoc Demo */
|
|
#define IEEE80211_C_SWRETRY 0x00001000 /* CAPABILITY: sw tx retry */
|
|
#define IEEE80211_C_TXPMGT 0x00002000 /* CAPABILITY: tx power mgmt */
|
|
#define IEEE80211_C_SHSLOT 0x00004000 /* CAPABILITY: short slottime */
|
|
#define IEEE80211_C_SHPREAMBLE 0x00008000 /* CAPABILITY: short preamble */
|
|
#define IEEE80211_C_MONITOR 0x00010000 /* CAPABILITY: monitor mode */
|
|
#define IEEE80211_C_DFS 0x00020000 /* CAPABILITY: DFS/radar avail*/
|
|
#define IEEE80211_C_MBSS 0x00040000 /* CAPABILITY: MBSS available */
|
|
#define IEEE80211_C_SWSLEEP 0x00080000 /* CAPABILITY: do sleep here */
|
|
#define IEEE80211_C_SWAMSDUTX 0x00100000 /* CAPABILITY: software A-MSDU TX */
|
|
/* 0x7c0000 available */
|
|
#define IEEE80211_C_WPA1 0x00800000 /* CAPABILITY: WPA1 avail */
|
|
#define IEEE80211_C_WPA2 0x01000000 /* CAPABILITY: WPA2 avail */
|
|
#define IEEE80211_C_WPA 0x01800000 /* CAPABILITY: WPA1+WPA2 avail*/
|
|
#define IEEE80211_C_BURST 0x02000000 /* CAPABILITY: frame bursting */
|
|
#define IEEE80211_C_WME 0x04000000 /* CAPABILITY: WME avail */
|
|
#define IEEE80211_C_WDS 0x08000000 /* CAPABILITY: 4-addr support */
|
|
/* 0x10000000 reserved */
|
|
#define IEEE80211_C_BGSCAN 0x20000000 /* CAPABILITY: bg scanning */
|
|
#define IEEE80211_C_TXFRAG 0x40000000 /* CAPABILITY: tx fragments */
|
|
#define IEEE80211_C_TDMA 0x80000000 /* CAPABILITY: TDMA avail */
|
|
/* XXX protection/barker? */
|
|
|
|
#define IEEE80211_C_OPMODE \
|
|
(IEEE80211_C_STA | IEEE80211_C_IBSS | IEEE80211_C_HOSTAP | \
|
|
IEEE80211_C_AHDEMO | IEEE80211_C_MONITOR | IEEE80211_C_WDS | \
|
|
IEEE80211_C_TDMA | IEEE80211_C_MBSS)
|
|
|
|
#define IEEE80211_C_BITS \
|
|
"\20\1STA\002803ENCAP\7FF\10TURBOP\11IBSS\12PMGT" \
|
|
"\13HOSTAP\14AHDEMO\15SWRETRY\16TXPMGT\17SHSLOT\20SHPREAMBLE" \
|
|
"\21MONITOR\22DFS\23MBSS\30WPA1\31WPA2\32BURST\33WME\34WDS\36BGSCAN" \
|
|
"\37TXFRAG\40TDMA"
|
|
|
|
/*
|
|
* ic_htcaps/iv_htcaps: HT-specific device/driver capabilities
|
|
*
|
|
* NB: the low 16-bits are the 802.11 definitions, the upper
|
|
* 16-bits are used to define s/w/driver capabilities.
|
|
*/
|
|
#define IEEE80211_HTC_AMPDU 0x00010000 /* CAPABILITY: A-MPDU tx */
|
|
#define IEEE80211_HTC_AMSDU 0x00020000 /* CAPABILITY: A-MSDU tx */
|
|
/* NB: HT40 is implied by IEEE80211_HTCAP_CHWIDTH40 */
|
|
#define IEEE80211_HTC_HT 0x00040000 /* CAPABILITY: HT operation */
|
|
#define IEEE80211_HTC_SMPS 0x00080000 /* CAPABILITY: MIMO power save*/
|
|
#define IEEE80211_HTC_RIFS 0x00100000 /* CAPABILITY: RIFS support */
|
|
#define IEEE80211_HTC_RXUNEQUAL 0x00200000 /* CAPABILITY: RX unequal MCS */
|
|
#define IEEE80211_HTC_RXMCS32 0x00400000 /* CAPABILITY: MCS32 support */
|
|
#define IEEE80211_HTC_TXUNEQUAL 0x00800000 /* CAPABILITY: TX unequal MCS */
|
|
#define IEEE80211_HTC_TXMCS32 0x01000000 /* CAPABILITY: MCS32 support */
|
|
#define IEEE80211_HTC_TXLDPC 0x02000000 /* CAPABILITY: TX using LDPC */
|
|
|
|
#define IEEE80211_C_HTCAP_BITS \
|
|
"\20\1LDPC\2CHWIDTH40\5GREENFIELD\6SHORTGI20\7SHORTGI40\10TXSTBC" \
|
|
"\21AMPDU\22AMSDU\23HT\24SMPS\25RIFS\32TXLDPC"
|
|
|
|
/*
|
|
* RX status notification - which fields are valid.
|
|
*/
|
|
#define IEEE80211_R_NF 0x00000001 /* global NF value valid */
|
|
#define IEEE80211_R_RSSI 0x00000002 /* global RSSI value valid */
|
|
#define IEEE80211_R_C_CHAIN 0x00000004 /* RX chain count valid */
|
|
#define IEEE80211_R_C_NF 0x00000008 /* per-chain NF value valid */
|
|
#define IEEE80211_R_C_RSSI 0x00000010 /* per-chain RSSI value valid */
|
|
#define IEEE80211_R_C_EVM 0x00000020 /* per-chain EVM valid */
|
|
#define IEEE80211_R_C_HT40 0x00000040 /* RX'ed packet is 40mhz, pilots 4,5 valid */
|
|
#define IEEE80211_R_FREQ 0x00000080 /* Freq value populated, MHz */
|
|
#define IEEE80211_R_IEEE 0x00000100 /* IEEE value populated */
|
|
#define IEEE80211_R_BAND 0x00000200 /* Frequency band populated */
|
|
#define IEEE80211_R_TSF32 0x00004000 /* 32 bit TSF */
|
|
#define IEEE80211_R_TSF64 0x00008000 /* 64 bit TSF */
|
|
#define IEEE80211_R_TSF_START 0x00010000 /* TSF is sampled at start of frame */
|
|
#define IEEE80211_R_TSF_END 0x00020000 /* TSF is sampled at end of frame */
|
|
|
|
/*
|
|
* RX status notification - describe the packet.
|
|
*/
|
|
#define IEEE80211_RX_F_STBC 0x00000001
|
|
#define IEEE80211_RX_F_LDPC 0x00000002
|
|
#define IEEE80211_RX_F_AMSDU 0x00000004 /* This is the start of an decap AMSDU list */
|
|
#define IEEE80211_RX_F_AMSDU_MORE 0x00000008 /* This is another decap AMSDU frame in the batch */
|
|
#define IEEE80211_RX_F_AMPDU 0x00000010 /* This is the start of an decap AMPDU list */
|
|
#define IEEE80211_RX_F_AMPDU_MORE 0x00000020 /* This is another decap AMPDU frame in the batch */
|
|
#define IEEE80211_RX_F_FAIL_FCSCRC 0x00000040 /* Failed CRC/FCS */
|
|
#define IEEE80211_RX_F_FAIL_MIC 0x00000080 /* Failed MIC check */
|
|
#define IEEE80211_RX_F_DECRYPTED 0x00000100 /* Hardware decrypted */
|
|
#define IEEE80211_RX_F_IV_STRIP 0x00000200 /* Decrypted; IV stripped */
|
|
#define IEEE80211_RX_F_MMIC_STRIP 0x00000400 /* Decrypted; MMIC stripped */
|
|
#define IEEE80211_RX_F_SHORTGI 0x00000800 /* This is a short-GI frame */
|
|
#define IEEE80211_RX_F_CCK 0x00001000
|
|
#define IEEE80211_RX_F_OFDM 0x00002000
|
|
#define IEEE80211_RX_F_HT 0x00004000
|
|
#define IEEE80211_RX_F_VHT 0x00008000
|
|
|
|
/* Channel width */
|
|
#define IEEE80211_RX_FW_20MHZ 1
|
|
#define IEEE80211_RX_FW_40MHZ 2
|
|
#define IEEE80211_RX_FW_80MHZ 3
|
|
|
|
/* PHY type */
|
|
#define IEEE80211_RX_FP_11B 1
|
|
#define IEEE80211_RX_FP_11G 2
|
|
#define IEEE80211_RX_FP_11A 3
|
|
#define IEEE80211_RX_FP_11NA 4
|
|
#define IEEE80211_RX_FP_11NG 5
|
|
|
|
struct ieee80211_rx_stats {
|
|
uint32_t r_flags; /* IEEE80211_R_* flags */
|
|
uint32_t c_pktflags; /* IEEE80211_RX_F_* flags */
|
|
|
|
uint64_t c_rx_tsf; /* 32 or 64 bit TSF */
|
|
|
|
/* All DWORD aligned */
|
|
int16_t c_nf_ctl[IEEE80211_MAX_CHAINS]; /* per-chain NF */
|
|
int16_t c_nf_ext[IEEE80211_MAX_CHAINS]; /* per-chain NF */
|
|
int16_t c_rssi_ctl[IEEE80211_MAX_CHAINS]; /* per-chain RSSI */
|
|
int16_t c_rssi_ext[IEEE80211_MAX_CHAINS]; /* per-chain RSSI */
|
|
|
|
/* 32 bits */
|
|
uint8_t c_nf; /* global NF */
|
|
uint8_t c_rssi; /* global RSSI */
|
|
uint8_t c_chain; /* number of RX chains involved */
|
|
uint8_t c_rate; /* legacy; 11n rate code; VHT MCS */
|
|
|
|
/* 32 bits */
|
|
uint16_t c_freq; /* Frequency, MHz */
|
|
uint8_t c_ieee; /* Channel */
|
|
uint8_t c_width; /* channel width, FW flags above */
|
|
|
|
/* Force alignment to DWORD */
|
|
union {
|
|
uint8_t evm[IEEE80211_MAX_CHAINS][IEEE80211_MAX_EVM_PILOTS];
|
|
/* per-chain, per-pilot EVM values */
|
|
uint32_t __aln[8];
|
|
} evm;
|
|
|
|
/* 32 bits */
|
|
uint8_t c_phytype; /* PHY type, FW flags above */
|
|
uint8_t c_vhtnss; /* VHT - number of spatial streams */
|
|
uint8_t c_pad2[2];
|
|
};
|
|
|
|
struct ieee80211_rx_params {
|
|
struct ieee80211_rx_stats params;
|
|
};
|
|
|
|
#endif /* _NET80211__IEEE80211_H_ */
|