1537078d8f
Mainly focus on files that use BSD 2-Clause license, however the tool I was using misidentified many licenses so this was mostly a manual - error prone - task. The Software Package Data Exchange (SPDX) group provides a specification to make it easier for automated tools to detect and summarize well known opensource licenses. We are gradually adopting the specification, noting that the tags are considered only advisory and do not, in any way, superceed or replace the license texts.
206 lines
9.4 KiB
C
206 lines
9.4 KiB
C
/*-
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*
|
|
* cyclades cyclom-y serial driver
|
|
* Andrew Herbert <andrew@werple.apana.org.au>, 17 August 1993
|
|
*
|
|
* Copyright (c) 1993 Andrew Herbert.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name Andrew Herbert may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
|
* NO EVENT SHALL I BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
|
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
|
|
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
|
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
|
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* Definitions for Cirrus Logic CD1400 serial/parallel chips.
|
|
*/
|
|
|
|
#define CD1400_NO_OF_CHANNELS 4 /* 4 serial channels per chip */
|
|
#define CD1400_RX_FIFO_SIZE 12
|
|
#define CD1400_TX_FIFO_SIZE 12
|
|
|
|
/*
|
|
* Global registers.
|
|
*/
|
|
#define CD1400_GFRCR 0x40 /* global firmware revision code */
|
|
#define CD1400_CAR 0x68 /* channel access */
|
|
#define CD1400_CAR_CHAN (3<<0) /* channel select */
|
|
#define CD1400_GCR 0x4B /* global configuration */
|
|
#define CD1400_GCR_PARALLEL (1<<7) /* channel 0 is parallel */
|
|
#define CD1400_SVRR 0x67 /* service request */
|
|
#define CD1400_SVRR_MDMCH (1<<2)
|
|
#define CD1400_SVRR_TXRDY (1<<1)
|
|
#define CD1400_SVRR_RXRDY (1<<0)
|
|
#define CD1400_RICR 0x44 /* receive interrupting channel */
|
|
#define CD1400_TICR 0x45 /* transmit interrupting channel */
|
|
#define CD1400_MICR 0x46 /* modem interrupting channel */
|
|
#define CD1400_RIR 0x6B /* receive interrupt status */
|
|
#define CD1400_RIR_RDIREQ (1<<7) /* rx service required */
|
|
#define CD1400_RIR_RBUSY (1<<6) /* rx service in progress */
|
|
#define CD1400_RIR_CHAN (3<<0) /* channel select */
|
|
#define CD1400_TIR 0x6A /* transmit interrupt status */
|
|
#define CD1400_TIR_RDIREQ (1<<7) /* tx service required */
|
|
#define CD1400_TIR_RBUSY (1<<6) /* tx service in progress */
|
|
#define CD1400_TIR_CHAN (3<<0) /* channel select */
|
|
#define CD1400_MIR 0x69 /* modem interrupt status */
|
|
#define CD1400_MIR_RDIREQ (1<<7) /* modem service required */
|
|
#define CD1400_MIR_RBUSY (1<<6) /* modem service in progress */
|
|
#define CD1400_MIR_CHAN (3<<0) /* channel select */
|
|
#define CD1400_PPR 0x7E /* prescaler period */
|
|
#define CD1400_PPR_PRESCALER 512
|
|
|
|
/*
|
|
* Virtual registers.
|
|
*/
|
|
#define CD1400_RIVR 0x43 /* receive interrupt vector */
|
|
#define CD1400_RIVR_EXCEPTION (1<<2) /* receive exception bit */
|
|
#define CD1400_TIVR 0x42 /* transmit interrupt vector */
|
|
#define CD1400_MIVR 0x41 /* modem interrupt vector */
|
|
#define CD1400_TDR 0x63 /* transmit data */
|
|
#define CD1400_RDSR 0x62 /* receive data/status */
|
|
#define CD1400_RDSR_TIMEOUT (1<<7) /* rx timeout */
|
|
#define CD1400_RDSR_SPECIAL_SHIFT 4 /* rx special char shift */
|
|
#define CD1400_RDSR_SPECIAL (7<<4) /* rx special char */
|
|
#define CD1400_RDSR_BREAK (1<<3) /* rx break */
|
|
#define CD1400_RDSR_PE (1<<2) /* rx parity error */
|
|
#define CD1400_RDSR_FE (1<<1) /* rx framing error */
|
|
#define CD1400_RDSR_OE (1<<0) /* rx overrun error */
|
|
#define CD1400_MISR 0x4C /* modem interrupt status */
|
|
#define CD1400_MISR_DSRd (1<<7) /* DSR delta */
|
|
#define CD1400_MISR_CTSd (1<<6) /* CTS delta */
|
|
#define CD1400_MISR_RId (1<<5) /* RI delta */
|
|
#define CD1400_MISR_CDd (1<<4) /* CD delta */
|
|
#define CD1400_EOSRR 0x60 /* end of service request */
|
|
|
|
/*
|
|
* Channel registers.
|
|
*/
|
|
#define CD1400_LIVR 0x18 /* local interrupt vector */
|
|
#define CD1400_CCR 0x05 /* channel control */
|
|
#define CD1400_CCR_CMDRESET (1<<7) /* enables following: */
|
|
#define CD1400_CCR_FTF (1<<1) /* flush tx fifo */
|
|
#define CD1400_CCR_FULLRESET (1<<0) /* full reset */
|
|
#define CD1400_CCR_CHANRESET 0 /* current channel */
|
|
#define CD1400_CCR_CMDCORCHG (1<<6) /* enables following: */
|
|
#define CD1400_CCR_COR3 (1<<3) /* COR3 changed */
|
|
#define CD1400_CCR_COR2 (1<<2) /* COR2 changed */
|
|
#define CD1400_CCR_COR1 (1<<1) /* COR1 changed */
|
|
#define CD1400_CCR_CMDSENDSC (1<<5) /* enables following: */
|
|
#define CD1400_CCR_SC (7<<0) /* special char 1-4 */
|
|
#define CD1400_CCR_CMDCHANCTL (1<<4) /* enables following: */
|
|
#define CD1400_CCR_XMTEN (1<<3) /* tx enable */
|
|
#define CD1400_CCR_XMTDIS (1<<2) /* tx disable */
|
|
#define CD1400_CCR_RCVEN (1<<1) /* rx enable */
|
|
#define CD1400_CCR_RCVDIS (1<<0) /* rx disable */
|
|
#define CD1400_SRER 0x06 /* service request enable */
|
|
#define CD1400_SRER_MDMCH (1<<7) /* modem change */
|
|
#define CD1400_SRER_RXDATA (1<<4) /* rx data */
|
|
#define CD1400_SRER_TXRDY (1<<2) /* tx fifo empty */
|
|
#define CD1400_SRER_TXMPTY (1<<1) /* tx shift reg empty */
|
|
#define CD1400_SRER_NNDT (1<<0) /* no new data */
|
|
#define CD1400_COR1 0x08 /* channel option 1 */
|
|
#define CD1400_COR1_PARODD (1<<7)
|
|
#define CD1400_COR1_PARNORMAL (2<<5)
|
|
#define CD1400_COR1_PARFORCE (1<<5) /* odd/even = force 1/0 */
|
|
#define CD1400_COR1_PARNONE (0<<5)
|
|
#define CD1400_COR1_NOINPCK (1<<4)
|
|
#define CD1400_COR1_STOP2 (2<<2)
|
|
#define CD1400_COR1_STOP15 (1<<2) /* 1.5 stop bits */
|
|
#define CD1400_COR1_STOP1 (0<<2)
|
|
#define CD1400_COR1_CS8 (3<<0)
|
|
#define CD1400_COR1_CS7 (2<<0)
|
|
#define CD1400_COR1_CS6 (1<<0)
|
|
#define CD1400_COR1_CS5 (0<<0)
|
|
#define CD1400_COR2 0x09 /* channel option 2 */
|
|
#define CD1400_COR2_IXANY (1<<7) /* implied XON mode */
|
|
#define CD1400_COR2_IXOFF (1<<6) /* in-band tx flow control */
|
|
#define CD1400_COR2_ETC (1<<5) /* embedded tx command */
|
|
#define CD1400_ETC_CMD 0x00 /* start an ETC */
|
|
#define CD1400_ETC_SENDBREAK 0x81
|
|
#define CD1400_ETC_INSERTDELAY 0x82
|
|
#define CD1400_ETC_STOPBREAK 0x83
|
|
#define CD1400_COR2_LLM (1<<4) /* local loopback mode */
|
|
#define CD1400_COR2_RLM (1<<3) /* remote loopback mode */
|
|
#define CD1400_COR2_RTSAO (1<<2) /* RTS auto output */
|
|
#define CD1400_COR2_CCTS_OFLOW (1<<1) /* CTS auto enable */
|
|
#define CD1400_COR2_CDSR_OFLOW (1<<0) /* DSR auto enable */
|
|
#define CD1400_COR3 0x0A /* channel option 3 */
|
|
#define CD1400_COR3_SCDRNG (1<<7) /* special char detect range */
|
|
#define CD1400_COR3_SCD34 (1<<6) /* special char detect 3-4 */
|
|
#define CD1400_COR3_FTC (1<<5) /* flow control transparency */
|
|
#define CD1400_COR3_SCD12 (1<<4) /* special char detect 1-2 */
|
|
#define CD1400_COR3_RXTH (15<<0) /* rx fifo threshold */
|
|
#define CD1400_COR4 0x1E /* channel option 4 */
|
|
#define CD1400_COR4_IGNCR (1<<7)
|
|
#define CD1400_COR4_ICRNL (1<<6)
|
|
#define CD1400_COR4_INLCR (1<<5)
|
|
#define CD1400_COR4_IGNBRK (1<<4)
|
|
#define CD1400_COR4_NOBRKINT (1<<3)
|
|
#define CD1400_COR4_PFO_ESC (4<<0) /* parity/framing/overrun... */
|
|
#define CD1400_COR4_PFO_NUL (3<<0)
|
|
#define CD1400_COR4_PFO_DISCARD (2<<0)
|
|
#define CD1400_COR4_PFO_GOOD (1<<0)
|
|
#define CD1400_COR4_PFO_EXCEPTION (0<<0)
|
|
#define CD1400_COR5 0x1F /* channel option 5 */
|
|
#define CD1400_COR5_ISTRIP (1<<7)
|
|
#define CD1400_COR5_LNEXT (1<<6)
|
|
#define CD1400_COR5_CMOE (1<<5) /* char matching on error */
|
|
#define CD1400_COR5_EBD (1<<2) /* end of break detected */
|
|
#define CD1400_COR5_ONLCR (1<<1)
|
|
#define CD1400_COR5_OCRNL (1<<0)
|
|
#define CD1400_CCSR 0x0B /* channel control status */
|
|
#define CD1400_RDCR 0x0E /* received data count */
|
|
#define CD1400_SCHR1 0x1A /* special character 1 */
|
|
#define CD1400_SCHR2 0x1B /* special character 2 */
|
|
#define CD1400_SCHR3 0x1C /* special character 3 */
|
|
#define CD1400_SCHR4 0x1D /* special character 4 */
|
|
#define CD1400_SCRL 0x22 /* special character range, low */
|
|
#define CD1400_SCRH 0x23 /* special character range, high */
|
|
#define CD1400_LNC 0x24 /* lnext character */
|
|
#define CD1400_MCOR1 0x15 /* modem change option 1 */
|
|
#define CD1400_MCOR1_DSRzd (1<<7) /* DSR one-to-zero delta */
|
|
#define CD1400_MCOR1_CTSzd (1<<6)
|
|
#define CD1400_MCOR1_RIzd (1<<5)
|
|
#define CD1400_MCOR1_CDzd (1<<4)
|
|
#define CD1400_MCOR1_DTRth (15<<0) /* dtrflow threshold */
|
|
#define CD1400_MCOR2 0x16 /* modem change option 2 */
|
|
#define CD1400_MCOR2_DSRod (1<<7) /* DSR zero-to-one delta */
|
|
#define CD1400_MCOR2_CTSod (1<<6)
|
|
#define CD1400_MCOR2_RIod (1<<5)
|
|
#define CD1400_MCOR2_CDod (1<<4)
|
|
#define CD1400_RTPR 0x21 /* receive timeout period */
|
|
#define CD1400_MSVR1 0x6C /* modem signal value 1 */
|
|
#define CD1400_MSVR1_RTS (1<<0) /* RTS line (r/w) */
|
|
#define CD1400_MSVR2 0x6D /* modem signal value 2 */
|
|
#define CD1400_MSVR2_DSR (1<<7) /* !DSR line (r) */
|
|
#define CD1400_MSVR2_CTS (1<<6) /* !CTS line (r) */
|
|
#define CD1400_MSVR2_RI (1<<5) /* !RI line (r) */
|
|
#define CD1400_MSVR2_CD (1<<4) /* !CD line (r) */
|
|
#define CD1400_MSVR2_DTR (1<<1) /* DTR line (r/w) */
|
|
#define CD1400_PSVR 0x6F /* printer signal value */
|
|
#define CD1400_RBPR 0x78 /* receive baud rate period */
|
|
#define CD1400_RCOR 0x7C /* receive clock option */
|
|
#define CD1400_TBPR 0x72 /* transmit baud rate period */
|
|
#define CD1400_TCOR 0x76 /* transmit clock option */
|