freebsd-skq/etc/inetd.conf
rwatson 25c64c35f4 # WARNING: lukemftpd does not support PAM, MAC, per-class nologin files,
# or any login.conf resource limits or features; use it only if this is
# appropriate for your environment.  If you require these features, use
# the regular FreeBSD ftpd below.

Discourage users from using lukemftpd if they rely any of these standard
FreeBSD features that are fully supported by our native ftpd.  There
may be other features that are not yet supported that I have not yet
discovered.
2002-10-24 15:46:10 +00:00

127 lines
5.3 KiB
Plaintext

# $FreeBSD$
#
# Internet server configuration database
#
# Define *both* IPv4 and IPv6 entries for dual-stack support.
# To disable a service, comment it out by prefixing the line with '#'.
# To enable a service, remove the '#' at the beginning of the line.
#
# WARNING: lukemftpd does not support PAM, MAC, per-class nologin files,
# or any login.conf resource limits or features; use it only if this is
# appropriate for your environment. If you require these features, use
# the regular FreeBSD ftpd below.
#ftp stream tcp nowait root /usr/libexec/lukemftpd ftpd -l -r
#
#ftp stream tcp nowait root /usr/libexec/ftpd ftpd -l
#ftp stream tcp6 nowait root /usr/libexec/ftpd ftpd -l
#telnet stream tcp nowait root /usr/libexec/telnetd telnetd
#telnet stream tcp6 nowait root /usr/libexec/telnetd telnetd
#shell stream tcp nowait root /usr/libexec/rshd rshd
#shell stream tcp6 nowait root /usr/libexec/rshd rshd
#login stream tcp nowait root /usr/libexec/rlogind rlogind
#login stream tcp6 nowait root /usr/libexec/rlogind rlogind
#finger stream tcp nowait/3/10 nobody /usr/libexec/fingerd fingerd -s
#finger stream tcp6 nowait/3/10 nobody /usr/libexec/fingerd fingerd -s
#exec stream tcp nowait root /usr/libexec/rexecd rexecd
#nntp stream tcp nowait usenet /usr/libexec/nntpd nntpd
#
# run comsat as root to be able to print partial mailbox contents w/ biff,
# or use the safer tty:tty to just print that new mail has been received.
#comsat dgram udp wait tty:tty /usr/libexec/comsat comsat
#
# ntalk is required for the 'talk' utility to work correctly
#ntalk dgram udp wait tty:tty /usr/libexec/ntalkd ntalkd
#tftp dgram udp wait root /usr/libexec/tftpd tftpd -s /tftpboot
#tftp dgram udp6 wait root /usr/libexec/tftpd tftpd -s /tftpboot
#bootps dgram udp wait root /usr/libexec/bootpd bootpd
#
# "Small servers" -- used to be standard on, but we're more conservative
# about things due to Internet security concerns. Only turn on what you
# need.
#
#daytime stream tcp nowait root internal
#daytime stream tcp6 nowait root internal
#daytime dgram udp wait root internal
#daytime dgram udp6 wait root internal
#time stream tcp nowait root internal
#time stream tcp6 nowait root internal
#time dgram udp wait root internal
#time dgram udp6 wait root internal
#echo stream tcp nowait root internal
#echo dgram udp6 wait root internal
#echo dgram udp wait root internal
#echo stream tcp6 nowait root internal
#discard stream tcp nowait root internal
#discard stream tcp6 nowait root internal
#discard dgram udp wait root internal
#discard dgram udp6 wait root internal
#chargen stream tcp nowait root internal
#chargen stream tcp6 nowait root internal
#chargen dgram udp wait root internal
#chargen dgram udp6 wait root internal
#
# Kerberos authenticated services
#
#klogin stream tcp nowait root /usr/libexec/rlogind rlogind -k
#eklogin stream tcp nowait root /usr/libexec/rlogind rlogind -k -x
#kshell stream tcp nowait root /usr/libexec/rshd rshd -k
#kip stream tcp nowait root /usr/libexec/kipd kipd
#
# CVS servers - for master CVS repositories only! You must set the
# --allow-root path correctly or you open a trivial to exploit but
# deadly security hole.
#
#cvspserver stream tcp nowait root /usr/bin/cvs cvs --allow-root=/your/cvsroot/here pserver
#cvspserver stream tcp nowait root /usr/bin/cvs cvs --allow-root=/your/cvsroot/here kserver
#
# RPC based services (you MUST have rpcbind running to use these)
#
#rstatd/1-3 dgram rpc/udp wait root /usr/libexec/rpc.rstatd rpc.rstatd
#rusersd/1-2 dgram rpc/udp wait root /usr/libexec/rpc.rusersd rpc.rusersd
#walld/1 dgram rpc/udp wait root /usr/libexec/rpc.rwalld rpc.rwalld
#pcnfsd/1-2 dgram rpc/udp wait root /usr/libexec/rpc.pcnfsd rpc.pcnfsd
#rquotad/1 dgram rpc/udp wait root /usr/libexec/rpc.rquotad rpc.rquotad
#sprayd/1 dgram rpc/udp wait root /usr/libexec/rpc.sprayd rpc.sprayd
#
# example entry for the optional pop3 server
#
#pop3 stream tcp nowait root /usr/local/libexec/popper popper
#
# example entry for the optional imap4 server
#
#imap4 stream tcp nowait root /usr/local/libexec/imapd imapd
#
# example entry for the optional uucpd server
#uucpd stream tcp nowait root /usr/local/libexec/uucpd uucpd
#
# Return error for all "ident" requests
#
#auth stream tcp nowait root internal
#auth stream tcp6 nowait root internal
#
# Provide internally a real "ident" service which provides ~/.fakeid support,
# provides ~/.noident support, reports UNKNOWN as the operating system type
# and times out after 30 seconds.
#
#auth stream tcp nowait root internal auth -r -f -n -o UNKNOWN -t 30
#auth stream tcp6 nowait root internal auth -r -f -n -o UNKNOWN -t 30
#
# Example entry for an external ident server
#
#auth stream tcp wait root /usr/local/sbin/identd identd -w -t120
#
# Example entry for the optional qmail MTA
# NOTE: This is no longer the correct way to handle incoming SMTP
# connections for qmail. Use tcpserver (http://cr.yp.to/ucspi-tcp.html)
# instead.
#
#smtp stream tcp nowait qmaild /var/qmail/bin/tcp-env tcp-env /var/qmail/bin/qmail-smtpd
#
# Enable the following two entries to enable samba startup from inetd
# (from the Samba documentation). Enable the third entry to enable the swat
# samba configuration tool.
#
#netbios-ssn stream tcp nowait root /usr/local/sbin/smbd smbd
#netbios-ns dgram udp wait root /usr/local/sbin/nmbd nmbd
#swat stream tcp nowait/400 root /usr/local/sbin/swat swat