1d4c34376a
Mainly focus on files that use BSD 2-Clause license, however the tool I was using misidentified many licenses so this was mostly a manual - error prone - task. The Software Package Data Exchange (SPDX) group provides a specification to make it easier for automated tools to detect and summarize well known opensource licenses. We are gradually adopting the specification, noting that the tags are considered only advisory and do not, in any way, superceed or replace the license texts.
321 lines
14 KiB
C
321 lines
14 KiB
C
/*-
|
|
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
|
|
*
|
|
* Copyright (c) 2013 Thomas Skibo
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* Defines for Zynq-7000 SLCR registers.
|
|
*
|
|
* Most of these registers are initialized by the First Stage Boot
|
|
* Loader and are not modified by the kernel.
|
|
*
|
|
* Reference: Zynq-7000 All Programmable SoC Technical Reference Manual.
|
|
* (v1.4) November 16, 2012. Xilinx doc UG585. SLCR register definitions
|
|
* are in appendix B.28.
|
|
*/
|
|
|
|
#ifndef _ZY7_SLCR_H_
|
|
#define _ZY7_SLCR_H_
|
|
|
|
#define ZY7_SCLR_SCL 0x0000
|
|
#define ZY7_SLCR_LOCK 0x0004
|
|
#define ZY7_SLCR_LOCK_MAGIC 0x767b
|
|
#define ZY7_SLCR_UNLOCK 0x0008
|
|
#define ZY7_SLCR_UNLOCK_MAGIC 0xdf0d
|
|
#define ZY7_SLCR_LOCKSTA 0x000c
|
|
|
|
/* PLL controls. */
|
|
#define ZY7_SLCR_ARM_PLL_CTRL 0x0100
|
|
#define ZY7_SLCR_DDR_PLL_CTRL 0x0104
|
|
#define ZY7_SLCR_IO_PLL_CTRL 0x0108
|
|
#define ZY7_SLCR_PLL_CTRL_RESET (1<<0)
|
|
#define ZY7_SLCR_PLL_CTRL_PWRDWN (1<<1)
|
|
#define ZY7_SLCR_PLL_CTRL_BYPASS_QUAL (1<<3)
|
|
#define ZY7_SLCR_PLL_CTRL_BYPASS_FORCE (1<<4)
|
|
#define ZY7_SLCR_PLL_CTRL_FDIV_SHIFT 12
|
|
#define ZY7_SLCR_PLL_CTRL_FDIV_MASK (0x7f<<12)
|
|
#define ZY7_SLCR_PLL_STATUS 0x010c
|
|
#define ZY7_SLCR_PLL_STAT_ARM_PLL_LOCK (1<<0)
|
|
#define ZY7_SLCR_PLL_STAT_DDR_PLL_LOCK (1<<1)
|
|
#define ZY7_SLCR_PLL_STAT_IO_PLL_LOCK (1<<2)
|
|
#define ZY7_SLCR_PLL_STAT_ARM_PLL_STABLE (1<<3)
|
|
#define ZY7_SLCR_PLL_STAT_DDR_PLL_STABLE (1<<4)
|
|
#define ZY7_SLCR_PLL_STAT_IO_PLL_STABLE (1<<5)
|
|
#define ZY7_SLCR_ARM_PLL_CFG 0x0110
|
|
#define ZY7_SLCR_DDR_PLL_CFG 0x0114
|
|
#define ZY7_SLCR_IO_PLL_CFG 0x0118
|
|
#define ZY7_SLCR_PLL_CFG_RES_SHIFT 4
|
|
#define ZY7_SLCR_PLL_CFG_RES_MASK (0xf<<4)
|
|
#define ZY7_SLCR_PLL_CFG_PLL_CP_SHIFT 8
|
|
#define ZY7_SLCR_PLL_CFG_PLL_CP_MASK (0xf<<8)
|
|
#define ZY7_SLCR_PLL_CFG_LOCK_CNT_SHIFT 12
|
|
#define ZY7_SLCR_PLL_CFG_LOCK_CNT_MASK (0x3ff<<12)
|
|
|
|
/* Clock controls. */
|
|
#define ZY7_SLCR_ARM_CLK_CTRL 0x0120
|
|
#define ZY7_SLCR_ARM_CLK_CTRL_CPU_PERI_CLKACT (1<<28)
|
|
#define ZY7_SLCR_ARM_CLK_CTRL_CPU_1XCLKACT (1<<27)
|
|
#define ZY7_SLCR_ARM_CLK_CTRL_CPU_2XCLKACT (1<<26)
|
|
#define ZY7_SLCR_ARM_CLK_CTRL_CPU_3OR2XCLKACT (1<<25)
|
|
#define ZY7_SLCR_ARM_CLK_CTRL_CPU_6OR4XCLKACT (1<<24)
|
|
#define ZY7_SLCR_ARM_CLK_CTRL_SRCSEL_MASK (3<<4)
|
|
#define ZY7_SLCR_ARM_CLK_CTRL_SRCSEL_ARM_PLL (0<<4)
|
|
#define ZY7_SLCR_ARM_CLK_CTRL_SRCSEL_DDR_PLL (2<<4)
|
|
#define ZY7_SLCR_ARM_CLK_CTRL_SRCSEL_IO_PLL (3<<4)
|
|
#define ZY7_SLCR_ARM_CLK_CTRL_DIVISOR_SHIFT 8
|
|
#define ZY7_SLCR_ARM_CLK_CTRL_DIVISOR_MASK (0x3f<<8)
|
|
#define ZY7_SLCR_DDR_CLK_CTRL 0x0124
|
|
#define ZY7_SLCR_DDR_CLK_CTRL_2XCLK_DIV_SHIFT 26
|
|
#define ZY7_SLCR_DDR_CLK_CTRL_2XCLK_DIV_MASK (0x3f<<26)
|
|
#define ZY7_SLCR_DDR_CLK_CTRL_3XCLK_DIV_SHIFT 20
|
|
#define ZY7_SLCR_DDR_CLK_CTRL_3XCLK_DIV_MASK (0x3f<<20)
|
|
#define ZY7_SLCR_DDR_CLK_CTRL_2XCLKACT (1<<1)
|
|
#define ZY7_SLCR_DDR_CLK_CTRL_3XCLKACT (1<<0)
|
|
#define ZY7_SLCR_DCI_CLK_CTRL 0x0128
|
|
#define ZY7_SLCR_DCI_CLK_CTRL_DIVISOR1_SHIFT 20
|
|
#define ZY7_SLCR_DCI_CLK_CTRL_DIVISOR1_MASK (0x3f<<20)
|
|
#define ZY7_SLCR_DCI_CLK_CTRL_DIVISOR0_SHIFT 8
|
|
#define ZY7_SLCR_DCI_CLK_CTRL_DIVISOR0_MASK (0x3f<<8)
|
|
#define ZY7_SLCR_DCI_CLK_CTRL_CLKACT (1<<0)
|
|
#define ZY7_SLCR_APER_CLK_CTRL 0x012c /* amba periph clk ctrl */
|
|
#define ZY7_SLCR_APER_CLK_CTRL_SMC_CPU_1XCLKACT (1<<24)
|
|
#define ZY7_SLCR_APER_CLK_CTRL_LQSPI_CPU_1XCLKACT (1<<23)
|
|
#define ZY7_SLCR_APER_CLK_CTRL_GPIO_CPU_1XCLKACT (1<<22)
|
|
#define ZY7_SLCR_APER_CLK_CTRL_UART1_CPU_1XCLKACT (1<<21)
|
|
#define ZY7_SLCR_APER_CLK_CTRL_UART0_CPU_1XCLKACT (1<<20)
|
|
#define ZY7_SLCR_APER_CLK_CTRL_I2C1_CPU_1XCLKACT (1<<19)
|
|
#define ZY7_SLCR_APER_CLK_CTRL_I2C0_CPU_1XCLKACT (1<<18)
|
|
#define ZY7_SLCR_APER_CLK_CTRL_CAN1_CPU_1XCLKACT (1<<17)
|
|
#define ZY7_SLCR_APER_CLK_CTRL_CAN0_CPU_1XCLKACT (1<<16)
|
|
#define ZY7_SLCR_APER_CLK_CTRL_SPI1_CPU_1XCLKACT (1<<15)
|
|
#define ZY7_SLCR_APER_CLK_CTRL_SPI0_CPU_1XCLKACT (1<<14)
|
|
#define ZY7_SLCR_APER_CLK_CTRL_SDI1_CPU_1XCLKACT (1<<11)
|
|
#define ZY7_SLCR_APER_CLK_CTRL_SDI0_CPU_1XCLKACT (1<<10)
|
|
#define ZY7_SLCR_APER_CLK_CTRL_GEM1_CPU_1XCLKACT (1<<7)
|
|
#define ZY7_SLCR_APER_CLK_CTRL_GEM0_CPU_1XCLKACT (1<<6)
|
|
#define ZY7_SLCR_APER_CLK_CTRL_USB1_CPU_1XCLKACT (1<<3)
|
|
#define ZY7_SLCR_APER_CLK_CTRL_USB0_CPU_1XCLKACT (1<<2)
|
|
#define ZY7_SLCR_APER_CLK_CTRL_DMA_CPU_1XCLKACT (1<<0)
|
|
#define ZY7_SLCR_USB0_CLK_CTRL 0x0130
|
|
#define ZY7_SLCR_USB1_CLK_CTRL 0x0134
|
|
#define ZY7_SLCR_GEM0_RCLK_CTRL 0x0138
|
|
#define ZY7_SLCR_GEM1_RCLK_CTRL 0x013c
|
|
#define ZY7_SLCR_GEM0_CLK_CTRL 0x0140
|
|
#define ZY7_SLCR_GEM1_CLK_CTRL 0x0144
|
|
#define ZY7_SLCR_GEM_CLK_CTRL_DIVISOR1_MASK (0x3f<<20)
|
|
#define ZY7_SLCR_GEM_CLK_CTRL_DIVISOR1_SHIFT 20
|
|
#define ZY7_SLCR_GEM_CLK_CTRL_DIVISOR1_MAX 0x3f
|
|
#define ZY7_SLCR_GEM_CLK_CTRL_DIVISOR_MASK (0x3f<<8)
|
|
#define ZY7_SLCR_GEM_CLK_CTRL_DIVISOR_SHIFT 8
|
|
#define ZY7_SLCR_GEM_CLK_CTRL_DIVISOR_MAX 0x3f
|
|
#define ZY7_SLCR_GEM_CLK_CTRL_SRCSEL_MASK (7<<4)
|
|
#define ZY7_SLCR_GEM_CLK_CTRL_SRCSEL_IO_PLL (0<<4)
|
|
#define ZY7_SLCR_GEM_CLK_CTRL_SRCSEL_ARM_PLL (2<<4)
|
|
#define ZY7_SLCR_GEM_CLK_CTRL_SRCSEL_DDR_PLL (3<<4)
|
|
#define ZY7_SLCR_GEM_CLK_CTRL_SRCSEL_EMIO_CLK (4<<4)
|
|
#define ZY7_SLCR_GEM_CLK_CTRL_CLKACT 1
|
|
#define ZY7_SLCR_SMC_CLK_CTRL 0x0148
|
|
#define ZY7_SLCR_LQSPI_CLK_CTRL 0x014c
|
|
#define ZY7_SLCR_SDIO_CLK_CTRL 0x0150
|
|
#define ZY7_SLCR_UART_CLK_CTRL 0x0154
|
|
#define ZY7_SLCR_SPI_CLK_CTRL 0x0158
|
|
#define ZY7_SLCR_CAN_CLK_CTRL 0x015c
|
|
#define ZY7_SLCR_CAN_MIOCLK_CTRL 0x0160
|
|
#define ZY7_SLCR_DBG_CLK_CTRL 0x0164
|
|
#define ZY7_SLCR_PCAP_CLK_CTRL 0x0168
|
|
#define ZY7_SLCR_TOPSW_CLK_CTRL 0x016c /* central intercnn clk ctrl */
|
|
#define ZY7_SLCR_FPGA_CLK_CTRL(unit) (0x0170 + 0x10*(unit))
|
|
#define ZY7_SLCR_FPGA_CLK_CTRL_DIVISOR1_SHIFT 20
|
|
#define ZY7_SLCR_FPGA_CLK_CTRL_DIVISOR1_MASK (0x3f << 20)
|
|
#define ZY7_SLCR_FPGA_CLK_CTRL_DIVISOR0_SHIFT 8
|
|
#define ZY7_SLCR_FPGA_CLK_CTRL_DIVISOR0_MASK (0x3f << 8)
|
|
#define ZY7_SLCR_FPGA_CLK_CTRL_DIVISOR_MAX 0x3f
|
|
#define ZY7_SLCR_FPGA_CLK_CTRL_SRCSEL_SHIFT 4
|
|
#define ZY7_SLCR_FPGA_CLK_CTRL_SRCSEL_MASK (3 << 4)
|
|
#define ZY7_SLCR_FPGA_THR_CTRL(unit) (0x0174 + 0x10*(unit))
|
|
#define ZY7_SLCR_FPGA_THR_CTRL_CNT_RST (1 << 1)
|
|
#define ZY7_SLCR_FPGA_THR_CTRL_CPU_START (1 << 0)
|
|
#define ZY7_SLCR_FPGA_THR_CNT(unit) (0x0178 + 0x10*(unit))
|
|
#define ZY7_SLCR_FPGA_THR_STA(unit) (0x017c + 0x10*(unit))
|
|
#define ZY7_SLCR_CLK_621_TRUE 0x01c4 /* cpu clock ratio mode */
|
|
|
|
/* Reset controls. */
|
|
#define ZY7_SLCR_PSS_RST_CTRL 0x0200
|
|
#define ZY7_SLCR_PSS_RST_CTRL_SOFT_RESET (1<<0)
|
|
#define ZY7_SLCR_DDR_RST_CTRL 0x0204
|
|
#define ZY7_SLCR_TOPSW_RST_CTRL 0x0208
|
|
#define ZY7_SLCR_DMAC_RST_CTRL 0x020c
|
|
#define ZY7_SLCR_USB_RST_CTRL 0x0210
|
|
#define ZY7_SLCR_GEM_RST_CTRL 0x0214
|
|
#define ZY7_SLCR_SDIO_RST_CTRL 0x0218
|
|
#define ZY7_SLCR_SPI_RST_CTRL 0x021c
|
|
#define ZY7_SLCR_CAN_RST_CTRL 0x0220
|
|
#define ZY7_SLCR_I2C_RST_CTRL 0x0224
|
|
#define ZY7_SLCR_UART_RST_CTRL 0x0228
|
|
#define ZY7_SLCR_GPIO_RST_CTRL 0x022c
|
|
#define ZY7_SLCR_LQSPI_RST_CTRL 0x0230
|
|
#define ZY7_SLCR_SMC_RST_CTRL 0x0234
|
|
#define ZY7_SLCR_OCM_RST_CTRL 0x0238
|
|
#define ZY7_SLCR_DEVCI_RST_CTRL 0x023c
|
|
#define ZY7_SLCR_FPGA_RST_CTRL 0x0240
|
|
#define ZY7_SLCR_FPGA_RST_CTRL_FPGA3_OUT_RST (1<<3)
|
|
#define ZY7_SLCR_FPGA_RST_CTRL_FPGA2_OUT_RST (1<<2)
|
|
#define ZY7_SLCR_FPGA_RST_CTRL_FPGA1_OUT_RST (1<<1)
|
|
#define ZY7_SLCR_FPGA_RST_CTRL_FPGA0_OUT_RST (1<<0)
|
|
#define ZY7_SLCR_FPGA_RST_CTRL_RST_ALL 0xf
|
|
#define ZY7_SLCR_A9_CPU_RST_CTRL 0x0244
|
|
#define ZY7_SLCR_RS_AWDT_CTRL 0x024c
|
|
|
|
#define ZY7_SLCR_REBOOT_STAT 0x0258
|
|
#define ZY7_SLCR_REBOOT_STAT_STATE_MASK (0xff<<24)
|
|
#define ZY7_SLCR_REBOOT_STAT_POR (1<<22)
|
|
#define ZY7_SLCR_REBOOT_STAT_SRST_B (1<<21)
|
|
#define ZY7_SLCR_REBOOT_STAT_DBG_RST (1<<20)
|
|
#define ZY7_SLCR_REBOOT_STAT_SLC_RST (1<<19)
|
|
#define ZY7_SLCR_REBOOT_STAT_AWDT1_RST (1<<18)
|
|
#define ZY7_SLCR_REBOOT_STAT_AWDT0_RST (1<<17)
|
|
#define ZY7_SLCR_REBOOT_STAT_SWDT_RST (1<<16)
|
|
#define ZY7_SLCR_REBOOT_STAT_BOOTROM_ERR_CODE_MASK (0xffff)
|
|
#define ZY7_SLCR_BOOT_MODE 0x025c
|
|
#define ZY7_SLCR_BOOT_MODE_PLL_BYPASS (1<<4)
|
|
#define ZY7_SLCR_BOOT_MODE_JTAG_INDEP (1<<3)
|
|
#define ZY7_SLCR_BOOT_MODE_BOOTDEV_MASK 7
|
|
#define ZY7_SLCR_BOOT_MODE_BOOTDEV_JTAG 0
|
|
#define ZY7_SLCR_BOOT_MODE_BOOTDEV_QUAD_SPI 1
|
|
#define ZY7_SLCR_BOOT_MODE_BOOTDEV_NOR 2
|
|
#define ZY7_SLCR_BOOT_MODE_BOOTDEV_NAND 4
|
|
#define ZY7_SLCR_BOOT_MODE_BOOTDEV_SD_CARD 5
|
|
#define ZY7_SLCR_APU_CTRL 0x0300
|
|
#define ZY7_SLCR_WDT_CLK_SEL 0x0304
|
|
|
|
#define ZY7_SLCR_PSS_IDCODE 0x0530
|
|
#define ZY7_SLCR_PSS_IDCODE_REVISION_MASK (0xf<<28)
|
|
#define ZY7_SLCR_PSS_IDCODE_REVISION_SHIFT 28
|
|
#define ZY7_SLCR_PSS_IDCODE_FAMILY_MASK (0x7f<<21)
|
|
#define ZY7_SLCR_PSS_IDCODE_FAMILY_SHIFT 21
|
|
#define ZY7_SLCR_PSS_IDCODE_SUB_FAMILY_MASK (0xf<<17)
|
|
#define ZY7_SLCR_PSS_IDCODE_SUB_FAMILY_SHIFT 17
|
|
#define ZY7_SLCR_PSS_IDCODE_DEVICE_MASK (0x1f<<12)
|
|
#define ZY7_SLCR_PSS_IDCODE_DEVICE_SHIFT 12
|
|
#define ZY7_SLCR_PSS_IDCODE_MNFR_ID_MASK (0x7ff<<1)
|
|
#define ZY7_SLCR_PSS_IDCODE_MNFR_ID_SHIFT 1
|
|
|
|
#define ZY7_SLCR_DDR_URGENT 0x0600
|
|
#define ZY7_SLCR_DDR_CAL_START 0x060c
|
|
#define ZY7_SLCR_DDR_REF_START 0x0614
|
|
#define ZY7_SLCR_DDR_CMD_STA 0x0618
|
|
#define ZY7_SLCR_DDR_URGENT_SEL 0x061c
|
|
#define ZY7_SLCR_DDR_DFI_STATUS 0x0620
|
|
|
|
/* MIO Pin controls */
|
|
#define ZY7_SLCR_MIO_PIN(n) (0x0700+(n)*4) /* 0-53 */
|
|
#define ZY7_SLCR_MIO_PIN_RCVR_DIS (1<<13)
|
|
#define ZY7_SLCR_MIO_PIN_PULLUP_EN (1<<12)
|
|
#define ZY7_SLCR_MIO_PIN_IO_TYPE_MASK (7<<9)
|
|
#define ZY7_SLCR_MIO_PIN_IO_TYPE_LVTTL (0<<9)
|
|
#define ZY7_SLCR_MIO_PIN_IO_TYPE_LVCMOS18 (1<<9)
|
|
#define ZY7_SLCR_MIO_PIN_IO_TYPE_LVCMOS25 (2<<9)
|
|
#define ZY7_SLCR_MIO_PIN_IO_TYPE_LVCMOS33 (3<<9)
|
|
#define ZY7_SLCR_MIO_PIN_IO_TYPE_HSTL (4<<9)
|
|
#define ZY7_SLCR_MIO_PIN_L2_SEL_MASK (3<<3)
|
|
#define ZY7_SLCR_MIO_PIN_L2_SEL_L3_MUX (0<<3)
|
|
#define ZY7_SLCR_MIO_PIN_L2_SEL_SRAM_NOR_CS0 (1<<3)
|
|
#define ZY7_SLCR_MIO_PIN_L2_SEL_NAND_CS (2<<3)
|
|
#define ZY7_SLCR_MIO_PIN_L2_SEL_SDIO0_PC (3<<3)
|
|
#define ZY7_SLCR_MIO_PIN_L1_SEL (1<<2)
|
|
#define ZY7_SLCR_MIO_PIN_L0_SEL (1<<1)
|
|
#define ZY7_SLCR_MIO_PIN_TRI_EN (1<<0)
|
|
|
|
#define ZY7_SLCR_MIO_LOOPBACK 0x0804
|
|
#define ZY7_SLCR_MIO_LOOPBACK_I2C0_I2C1 (1<<3)
|
|
#define ZY7_SLCR_MIO_LOOPBACK_CAN0_CAN1 (1<<2)
|
|
#define ZY7_SLCR_MIO_LOOPBACK_UA0_UA1 (1<<1)
|
|
#define ZY7_SLCR_MIO_LOOPBACK_SPI0_SPI1 (1<<0)
|
|
#define ZY7_SLCR_MIO_MST_TRI0 0x080c
|
|
#define ZY7_SLCR_MIO_MST_TRI1 0x0810
|
|
#define ZY7_SLCR_SD0_WP_CD_SEL 0x0830
|
|
#define ZY7_SLCR_SD1_WP_CD_SEL 0x0834
|
|
|
|
/* PS-PL level shifter control. */
|
|
#define ZY7_SLCR_LVL_SHFTR_EN 0x900
|
|
#define ZY7_SLCR_LVL_SHFTR_EN_USER_LVL_IN_EN_0 (1<<3) /* PL to PS */
|
|
#define ZY7_SLCR_LVL_SHFTR_EN_USER_LVL_OUT_EN_0 (1<<2) /* PS to PL */
|
|
#define ZY7_SLCR_LVL_SHFTR_EN_USER_LVL_IN_EN_1 (1<<1) /* PL to PS */
|
|
#define ZY7_SLCR_LVL_SHFTR_EN_USER_LVL_OUT_EN_1 (1<<0) /* PS to PL */
|
|
#define ZY7_SLCR_LVL_SHFTR_EN_ALL 0xf
|
|
|
|
#define ZY7_SLCR_OCM_CFG 0x0910
|
|
|
|
#define ZY7_SLCR_GPIOB_CTRL 0x0b00
|
|
#define ZY7_SLCR_GPIOB_CFG_CMOS18 0x0b04
|
|
#define ZY7_SLCR_GPIOB_CFG_CMOS25 0x0b08
|
|
#define ZY7_SLCR_GPIOB_CFG_CMOS33 0x0b0c
|
|
#define ZY7_SLCR_GPIOB_CFG_LVTTL 0x0b10
|
|
#define ZY7_SLCR_GPIOB_CFG_HSTL 0x0b14
|
|
#define ZY7_SLCR_GPIOB_DRVR_BIAS_CTRL 0x0b18
|
|
|
|
#define ZY7_SLCR_DDRIOB_ADDR0 0x0b40
|
|
#define ZY7_SLCR_DDRIOB_ADDR1 0x0b44
|
|
#define ZY7_SLCR_DDRIOB_DATA0 0x0b48
|
|
#define ZY7_SLCR_DDRIOB_DATA1 0x0b4c
|
|
#define ZY7_SLCR_DDRIOB_DIFF0 0x0b50
|
|
#define ZY7_SLCR_DDRIOB_DIFF1 0x0b54
|
|
#define ZY7_SLCR_DDRIOB_CLK 0x0b58
|
|
#define ZY7_SLCR_DDRIOB_DRIVE_SLEW_ADDR 0x0b5c
|
|
#define ZY7_SLCR_DDRIOB_DRIVE_SLEW_DATA 0x0b60
|
|
#define ZY7_SLCR_DDRIOB_DRIVE_SLEW_DIFF 0x0b64
|
|
#define ZY7_SLCR_DDRIOB_DRIVE_SLEW_CLK 0x0b68
|
|
#define ZY7_SLCR_DDRIOB_DDR_CTRL 0x0b6c
|
|
#define ZY7_SLCR_DDRIOB_DCI_CTRL 0x0b70
|
|
#define ZY7_SLCR_DDRIOB_DCI_STATUS 0x0b74
|
|
|
|
#ifdef _KERNEL
|
|
extern void zy7_slcr_preload_pl(void);
|
|
extern void zy7_slcr_postload_pl(int en_level_shifters);
|
|
extern int cgem_set_ref_clk(int unit, int frequency);
|
|
|
|
/* Should be consistent with SRCSEL field of FPGAx_CLK_CTRL */
|
|
#define ZY7_PL_FCLK_SRC_IO 0
|
|
#define ZY7_PL_FCLK_SRC_IO_ALT 1 /* ZY7_PL_FCLK_SRC_IO is b0x */
|
|
#define ZY7_PL_FCLK_SRC_ARM 2
|
|
#define ZY7_PL_FCLK_SRC_DDR 3
|
|
|
|
int zy7_pl_fclk_set_source(int unit, int source);
|
|
int zy7_pl_fclk_get_source(int unit);
|
|
int zy7_pl_fclk_set_freq(int unit, int freq);
|
|
int zy7_pl_fclk_get_freq(int unit);
|
|
int zy7_pl_fclk_enable(int unit);
|
|
int zy7_pl_fclk_disable(int unit);
|
|
int zy7_pl_fclk_enabled(int unit);
|
|
int zy7_pl_level_shifters_enabled(void);
|
|
void zy7_pl_level_shifters_enable(void);
|
|
void zy7_pl_level_shifters_disable(void);
|
|
|
|
#endif
|
|
#endif /* _ZY7_SLCR_H_ */
|