adrian 48730f45ab Add a workaround for AR5416, AR9130 and AR9160 chipsets - work around ... an incorrectly calculated RTS duration value when transmitting aggregates. These earlier 802.11n NICs incorrectly used the ACK duration time when calculating what to put in the RTS of an aggregate frame. Instead it should have used the block-ack time. The result is that other stations may not reserve enough time and start transmitting _over_ the top of the in-progress blockack field. Tsk. This workaround is to popuate the burst duration field with the delta between the ACK duration the hardware is using and the required duration for the block-ack. The result is that the RTS field should now contain the correct duration for the subsequent block-ack. This doesn't apply for AR9280 and later NICs. Obtained from: Qualcomm Atheros		2013-02-22 07:07:11 +00:00
..
ath_dfs/null	Add a method to explicitly disable radar reporting if required.	2013-01-02 01:36:10 +00:00
ath_hal	Add a workaround for AR5416, AR9130 and AR9160 chipsets - work around	2013-02-22 07:07:11 +00:00
ath_rate	I've had some feedback that CCK rates are more reliable than MCS 0	2012-10-31 06:35:50 +00:00
ah_osdep.c	Fix the HAL debugging to only use one bit to mark a message as unmaskable.	2012-07-01 02:34:32 +00:00
ah_osdep.h	Migrate the ath_hal_filltxdesc() API to take a list of buffer/seglen values.	2012-08-05 10:12:27 +00:00
if_ath_ahb.c	Create a new TX lock specifically for queuing frames.	2013-02-07 07:50:16 +00:00
if_ath_alq.c	Extend the timestamp to be a timeval, rather than ticks.	2013-02-11 02:48:49 +00:00
if_ath_alq.h	Fix an incorrect sizeof()	2013-02-18 18:39:15 +00:00
if_ath_beacon.c	Add a quick work-around if ath_beacon_config() to not die if it's called	2013-01-17 16:26:40 +00:00
if_ath_beacon.h	Extend the beacon code slightly to support AP mode beaconing for the	2012-08-11 23:26:19 +00:00
if_ath_debug.c	TX EDMA debugging fixes:	2012-11-05 07:08:45 +00:00
if_ath_debug.h	Add a debug method to dump the EDMA TX status descriptor contents out.	2012-11-03 04:53:44 +00:00
if_ath_keycache.c	Don't allocate or program a key for the AR5210.	2012-11-19 23:54:05 +00:00
if_ath_keycache.h	Add a 'vap' to ath_keyset().	2011-11-08 19:25:52 +00:00
if_ath_led.c	Bring over the initial 802.11n bluetooth coexistence support code.	2012-06-26 22:16:53 +00:00
if_ath_led.h	Refactor out the software LED config code into a common function, called	2011-12-26 05:46:22 +00:00
if_ath_misc.h	Pull out the if_transmit() work and revert back to ath_start().	2013-02-13 05:32:19 +00:00
if_ath_pci.c	Create a new TX lock specifically for queuing frames.	2013-02-07 07:50:16 +00:00
if_ath_rx_edma.c	Mechanically substitute flags from historic mbuf allocator with	2012-12-04 09:32:43 +00:00
if_ath_rx_edma.h	Begin abstracting out the RX path in preparation for RX EDMA support.	2012-07-03 06:59:12 +00:00
if_ath_rx.c	* Reduce the PCU lock overhead a little by only re-acquiring it if we	2013-02-16 19:11:57 +00:00
if_ath_rx.h	Convert sc_rxpending to a per-EDMA queue, and use that for the legacy code.	2012-07-10 00:02:19 +00:00
if_ath_spectral.c	Fix format size.	2013-01-08 22:42:15 +00:00
if_ath_spectral.h	Add a new (skeleton) spectral mode manager module.	2013-01-02 03:59:02 +00:00
if_ath_sysctl.c	Add an option to allow the minimum number of delimiters to be tweaked.	2013-02-21 06:38:49 +00:00
if_ath_sysctl.h	Break out most of the HAL related tweaks into a per-HAL instance,	2011-06-23 02:38:36 +00:00
if_ath_tdma.c	Pull out the debugging code from the critical path and make sure it	2012-11-28 01:55:22 +00:00
if_ath_tdma.h	Migrate the TDMA management functions out of if_ath.c into if_ath_tdma.c.	2012-05-20 02:49:42 +00:00
if_ath_tsf.h	Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch].	2012-05-20 02:05:10 +00:00
if_ath_tx_edma.c	Methodize the process of adding the software TX queue to the taskqueue.	2013-02-07 02:15:25 +00:00
if_ath_tx_edma.h	Begin separating out the TX DMA setup in preparation for TX EDMA support.	2012-07-23 03:52:18 +00:00
if_ath_tx_ht.c	Add an option to allow the minimum number of delimiters to be tweaked.	2013-02-21 06:38:49 +00:00
if_ath_tx_ht.h	Introduce TX aggregation and software TX queue management	2011-11-08 22:43:13 +00:00
if_ath_tx.c	Disable debugging entries about BAW issues. I haven't seen any issues	2013-02-21 21:47:35 +00:00
if_ath_tx.h	Add a new option to limit the maximum size of aggregates.	2013-02-21 06:18:40 +00:00
if_ath.c	Disable debugging entries about BAW issues. I haven't seen any issues	2013-02-21 21:47:35 +00:00
if_athdfs.h	Add a method to explicitly disable radar reporting if required.	2013-01-02 01:36:10 +00:00
if_athioctl.h	Add support for triggering spectral scan upon a channel reset/change.	2013-01-08 22:15:13 +00:00
if_athrate.h	Create an ioctl API for fetching the current rate control information.	2012-07-20 01:27:20 +00:00
if_athvar.h	Add an option to allow the minimum number of delimiters to be tweaked.	2013-02-21 06:38:49 +00:00