freebsd-skq/sys/contrib/octeon-sdk/cvmx-helper-fpa.h
jmallett 56248d9da8 Merge the Cavium Octeon SDK 2.3.0 Simple Executive code and update FreeBSD to
make use of it where possible.

This primarily brings in support for newer hardware, and FreeBSD is not yet
able to support the abundance of IRQs on new hardware and many features in the
Ethernet driver.

Because of the changes to IRQs in the Simple Executive, we have to maintain our
own list of Octeon IRQs now, which probably can be pared-down and be specific
to the CIU interrupt unit soon, and when other interrupt mechanisms are added
they can maintain their own definitions.

Remove unmasking of interrupts from within the UART device now that the
function used is no longer present in the Simple Executive.  The unmasking
seems to have been gratuitous as this is more properly handled by the buses
above the UART device, and seems to work on that basis.
2012-03-11 06:17:49 +00:00

84 lines
3.2 KiB
C

/***********************license start***************
* Copyright (c) 2003-2010 Cavium Inc. (support@cavium.com). All rights
* reserved.
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* * Neither the name of Cavium Inc. nor the names of
* its contributors may be used to endorse or promote products
* derived from this software without specific prior written
* permission.
* This Software, including technical data, may be subject to U.S. export control
* laws, including the U.S. Export Administration Act and its associated
* regulations, and may be subject to export or import regulations in other
* countries.
* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
* AND WITH ALL FAULTS AND CAVIUM INC. MAKES NO PROMISES, REPRESENTATIONS OR
* WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
* THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
* DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
* SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
* MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
* VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
* CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
* PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
***********************license end**************************************/
/**
* @file
*
* Helper functions for FPA setup.
*
* <hr>$Revision: 70030 $<hr>
*/
#ifndef __CVMX_HELPER_H_FPA__
#define __CVMX_HELPER_H_FPA__
/**
* Allocate memory and initialize the FPA pools using memory
* from cvmx-bootmem. Sizes of each element in the pools is
* controlled by the cvmx-config.h header file. Specifying
* zero for any parameter will cause that FPA pool to not be
* setup. This is useful if you aren't using some of the
* hardware and want to save memory.
*
* @param packet_buffers
* Number of packet buffers to allocate
* @param work_queue_entries
* Number of work queue entries
* @param pko_buffers
* PKO Command buffers. You should at minimum have two per
* each PKO queue.
* @param tim_buffers
* TIM ring buffer command queues. At least two per timer bucket
* is recommended.
* @param dfa_buffers
* DFA command buffer. A relatively small (32 for example)
* number should work.
* @return Zero on success, non-zero if out of memory
*/
extern int cvmx_helper_initialize_fpa(int packet_buffers, int work_queue_entries,
int pko_buffers, int tim_buffers,
int dfa_buffers);
#endif /* __CVMX_HELPER_H__ */