d3f2d7a9be
A couple of drivers and one place in if.c use ETH_ADDR_LEN, even though net/ethernet.h provides an equivalent ETHER_ADDR_LEN definition. Cleanup all of the locations which refer to ETH_ADDR_LEN to use the standard ETHER_ADDR_LEN instead. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Submitted by: Jacob Keller <jacob.e.keller@intel.com> Reviewed by: erj@, jpaetzel@ Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D21239
560 lines
17 KiB
C
560 lines
17 KiB
C
/*-
|
|
* SPDX-License-Identifier: BSD-2-Clause
|
|
*
|
|
* Copyright (c) 2016 Nicole Graziano <nicole@nextbsd.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
/*$FreeBSD$*/
|
|
#include "opt_ddb.h"
|
|
#include "opt_inet.h"
|
|
#include "opt_inet6.h"
|
|
|
|
#ifdef HAVE_KERNEL_OPTION_HEADERS
|
|
#include "opt_device_polling.h"
|
|
#endif
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#ifdef DDB
|
|
#include <sys/types.h>
|
|
#include <ddb/ddb.h>
|
|
#endif
|
|
#if __FreeBSD_version >= 800000
|
|
#include <sys/buf_ring.h>
|
|
#endif
|
|
#include <sys/bus.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/kthread.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/module.h>
|
|
#include <sys/rman.h>
|
|
#include <sys/smp.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/taskqueue.h>
|
|
#include <sys/eventhandler.h>
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
|
|
#include <net/bpf.h>
|
|
#include <net/ethernet.h>
|
|
#include <net/if.h>
|
|
#include <net/if_var.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
#include <net/iflib.h>
|
|
|
|
#include <net/if_types.h>
|
|
#include <net/if_vlan_var.h>
|
|
|
|
#include <netinet/in_systm.h>
|
|
#include <netinet/in.h>
|
|
#include <netinet/if_ether.h>
|
|
#include <netinet/ip.h>
|
|
#include <netinet/ip6.h>
|
|
#include <netinet/tcp.h>
|
|
#include <netinet/udp.h>
|
|
|
|
#include <machine/in_cksum.h>
|
|
#include <dev/led/led.h>
|
|
#include <dev/pci/pcivar.h>
|
|
#include <dev/pci/pcireg.h>
|
|
|
|
#include "e1000_api.h"
|
|
#include "e1000_82571.h"
|
|
#include "ifdi_if.h"
|
|
|
|
|
|
#ifndef _EM_H_DEFINED_
|
|
#define _EM_H_DEFINED_
|
|
|
|
|
|
/* Tunables */
|
|
|
|
/*
|
|
* EM_MAX_TXD: Maximum number of Transmit Descriptors
|
|
* Valid Range: 80-256 for 82542 and 82543-based adapters
|
|
* 80-4096 for others
|
|
* Default Value: 1024
|
|
* This value is the number of transmit descriptors allocated by the driver.
|
|
* Increasing this value allows the driver to queue more transmits. Each
|
|
* descriptor is 16 bytes.
|
|
* Since TDLEN should be multiple of 128bytes, the number of transmit
|
|
* desscriptors should meet the following condition.
|
|
* (num_tx_desc * sizeof(struct e1000_tx_desc)) % 128 == 0
|
|
*/
|
|
#define EM_MIN_TXD 128
|
|
#define EM_MAX_TXD 4096
|
|
#define EM_DEFAULT_TXD 1024
|
|
#define EM_DEFAULT_MULTI_TXD 4096
|
|
#define IGB_MAX_TXD 4096
|
|
|
|
/*
|
|
* EM_MAX_RXD - Maximum number of receive Descriptors
|
|
* Valid Range: 80-256 for 82542 and 82543-based adapters
|
|
* 80-4096 for others
|
|
* Default Value: 1024
|
|
* This value is the number of receive descriptors allocated by the driver.
|
|
* Increasing this value allows the driver to buffer more incoming packets.
|
|
* Each descriptor is 16 bytes. A receive buffer is also allocated for each
|
|
* descriptor. The maximum MTU size is 16110.
|
|
* Since TDLEN should be multiple of 128bytes, the number of transmit
|
|
* desscriptors should meet the following condition.
|
|
* (num_tx_desc * sizeof(struct e1000_tx_desc)) % 128 == 0
|
|
*/
|
|
#define EM_MIN_RXD 128
|
|
#define EM_MAX_RXD 4096
|
|
#define EM_DEFAULT_RXD 1024
|
|
#define EM_DEFAULT_MULTI_RXD 4096
|
|
#define IGB_MAX_RXD 4096
|
|
|
|
/*
|
|
* EM_TIDV - Transmit Interrupt Delay Value
|
|
* Valid Range: 0-65535 (0=off)
|
|
* Default Value: 64
|
|
* This value delays the generation of transmit interrupts in units of
|
|
* 1.024 microseconds. Transmit interrupt reduction can improve CPU
|
|
* efficiency if properly tuned for specific network traffic. If the
|
|
* system is reporting dropped transmits, this value may be set too high
|
|
* causing the driver to run out of available transmit descriptors.
|
|
*/
|
|
#define EM_TIDV 64
|
|
|
|
/*
|
|
* EM_TADV - Transmit Absolute Interrupt Delay Value
|
|
* (Not valid for 82542/82543/82544)
|
|
* Valid Range: 0-65535 (0=off)
|
|
* Default Value: 64
|
|
* This value, in units of 1.024 microseconds, limits the delay in which a
|
|
* transmit interrupt is generated. Useful only if EM_TIDV is non-zero,
|
|
* this value ensures that an interrupt is generated after the initial
|
|
* packet is sent on the wire within the set amount of time. Proper tuning,
|
|
* along with EM_TIDV, may improve traffic throughput in specific
|
|
* network conditions.
|
|
*/
|
|
#define EM_TADV 64
|
|
|
|
/*
|
|
* EM_RDTR - Receive Interrupt Delay Timer (Packet Timer)
|
|
* Valid Range: 0-65535 (0=off)
|
|
* Default Value: 0
|
|
* This value delays the generation of receive interrupts in units of 1.024
|
|
* microseconds. Receive interrupt reduction can improve CPU efficiency if
|
|
* properly tuned for specific network traffic. Increasing this value adds
|
|
* extra latency to frame reception and can end up decreasing the throughput
|
|
* of TCP traffic. If the system is reporting dropped receives, this value
|
|
* may be set too high, causing the driver to run out of available receive
|
|
* descriptors.
|
|
*
|
|
* CAUTION: When setting EM_RDTR to a value other than 0, adapters
|
|
* may hang (stop transmitting) under certain network conditions.
|
|
* If this occurs a WATCHDOG message is logged in the system
|
|
* event log. In addition, the controller is automatically reset,
|
|
* restoring the network connection. To eliminate the potential
|
|
* for the hang ensure that EM_RDTR is set to 0.
|
|
*/
|
|
#define EM_RDTR 0
|
|
|
|
/*
|
|
* Receive Interrupt Absolute Delay Timer (Not valid for 82542/82543/82544)
|
|
* Valid Range: 0-65535 (0=off)
|
|
* Default Value: 64
|
|
* This value, in units of 1.024 microseconds, limits the delay in which a
|
|
* receive interrupt is generated. Useful only if EM_RDTR is non-zero,
|
|
* this value ensures that an interrupt is generated after the initial
|
|
* packet is received within the set amount of time. Proper tuning,
|
|
* along with EM_RDTR, may improve traffic throughput in specific network
|
|
* conditions.
|
|
*/
|
|
#define EM_RADV 64
|
|
|
|
/*
|
|
* This parameter controls whether or not autonegotation is enabled.
|
|
* 0 - Disable autonegotiation
|
|
* 1 - Enable autonegotiation
|
|
*/
|
|
#define DO_AUTO_NEG 1
|
|
|
|
/*
|
|
* This parameter control whether or not the driver will wait for
|
|
* autonegotiation to complete.
|
|
* 1 - Wait for autonegotiation to complete
|
|
* 0 - Don't wait for autonegotiation to complete
|
|
*/
|
|
#define WAIT_FOR_AUTO_NEG_DEFAULT 0
|
|
|
|
/* Tunables -- End */
|
|
|
|
#define AUTONEG_ADV_DEFAULT (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
|
|
ADVERTISE_100_HALF | ADVERTISE_100_FULL | \
|
|
ADVERTISE_1000_FULL)
|
|
|
|
#define AUTO_ALL_MODES 0
|
|
|
|
/* PHY master/slave setting */
|
|
#define EM_MASTER_SLAVE e1000_ms_hw_default
|
|
|
|
/*
|
|
* Micellaneous constants
|
|
*/
|
|
#define EM_VENDOR_ID 0x8086
|
|
#define EM_FLASH 0x0014
|
|
|
|
#define EM_JUMBO_PBA 0x00000028
|
|
#define EM_DEFAULT_PBA 0x00000030
|
|
#define EM_SMARTSPEED_DOWNSHIFT 3
|
|
#define EM_SMARTSPEED_MAX 15
|
|
#define EM_MAX_LOOP 10
|
|
|
|
#define MAX_NUM_MULTICAST_ADDRESSES 128
|
|
#define PCI_ANY_ID (~0U)
|
|
#define ETHER_ALIGN 2
|
|
#define EM_FC_PAUSE_TIME 0x0680
|
|
#define EM_EEPROM_APME 0x400;
|
|
#define EM_82544_APME 0x0004;
|
|
|
|
|
|
/* Support AutoMediaDetect for Marvell M88 PHY in i354 */
|
|
#define IGB_MEDIA_RESET (1 << 0)
|
|
|
|
/* Define the starting Interrupt rate per Queue */
|
|
#define IGB_INTS_PER_SEC 8000
|
|
#define IGB_DEFAULT_ITR ((1000000/IGB_INTS_PER_SEC) << 2)
|
|
|
|
#define IGB_LINK_ITR 2000
|
|
#define I210_LINK_DELAY 1000
|
|
|
|
#define IGB_TXPBSIZE 20408
|
|
#define IGB_HDR_BUF 128
|
|
#define IGB_PKTTYPE_MASK 0x0000FFF0
|
|
#define IGB_DMCTLX_DCFLUSH_DIS 0x80000000 /* Disable DMA Coalesce Flush */
|
|
|
|
/*
|
|
* Driver state logic for the detection of a hung state
|
|
* in hardware. Set TX_HUNG whenever a TX packet is used
|
|
* (data is sent) and clear it when txeof() is invoked if
|
|
* any descriptors from the ring are cleaned/reclaimed.
|
|
* Increment internal counter if no descriptors are cleaned
|
|
* and compare to TX_MAXTRIES. When counter > TX_MAXTRIES,
|
|
* reset adapter.
|
|
*/
|
|
#define EM_TX_IDLE 0x00000000
|
|
#define EM_TX_BUSY 0x00000001
|
|
#define EM_TX_HUNG 0x80000000
|
|
#define EM_TX_MAXTRIES 10
|
|
|
|
#define PCICFG_DESC_RING_STATUS 0xe4
|
|
#define FLUSH_DESC_REQUIRED 0x100
|
|
|
|
|
|
#define IGB_RX_PTHRESH ((hw->mac.type == e1000_i354) ? 12 : \
|
|
((hw->mac.type <= e1000_82576) ? 16 : 8))
|
|
#define IGB_RX_HTHRESH 8
|
|
#define IGB_RX_WTHRESH ((hw->mac.type == e1000_82576 && \
|
|
(adapter->intr_type == IFLIB_INTR_MSIX)) ? 1 : 4)
|
|
|
|
#define IGB_TX_PTHRESH ((hw->mac.type == e1000_i354) ? 20 : 8)
|
|
#define IGB_TX_HTHRESH 1
|
|
#define IGB_TX_WTHRESH ((hw->mac.type != e1000_82575 && \
|
|
(adapter->intr_type == IFLIB_INTR_MSIX) ? 1 : 16)
|
|
|
|
/*
|
|
* TDBA/RDBA should be aligned on 16 byte boundary. But TDLEN/RDLEN should be
|
|
* multiple of 128 bytes. So we align TDBA/RDBA on 128 byte boundary. This will
|
|
* also optimize cache line size effect. H/W supports up to cache line size 128.
|
|
*/
|
|
#define EM_DBA_ALIGN 128
|
|
|
|
/*
|
|
* See Intel 82574 Driver Programming Interface Manual, Section 10.2.6.9
|
|
*/
|
|
#define TARC_COMPENSATION_MODE (1 << 7) /* Compensation Mode */
|
|
#define TARC_SPEED_MODE_BIT (1 << 21) /* On PCI-E MACs only */
|
|
#define TARC_MQ_FIX (1 << 23) | \
|
|
(1 << 24) | \
|
|
(1 << 25) /* Handle errata in MQ mode */
|
|
#define TARC_ERRATA_BIT (1 << 26) /* Note from errata on 82574 */
|
|
|
|
/* PCI Config defines */
|
|
#define EM_BAR_TYPE(v) ((v) & EM_BAR_TYPE_MASK)
|
|
#define EM_BAR_TYPE_MASK 0x00000001
|
|
#define EM_BAR_TYPE_MMEM 0x00000000
|
|
#define EM_BAR_TYPE_IO 0x00000001
|
|
#define EM_BAR_TYPE_FLASH 0x0014
|
|
#define EM_BAR_MEM_TYPE(v) ((v) & EM_BAR_MEM_TYPE_MASK)
|
|
#define EM_BAR_MEM_TYPE_MASK 0x00000006
|
|
#define EM_BAR_MEM_TYPE_32BIT 0x00000000
|
|
#define EM_BAR_MEM_TYPE_64BIT 0x00000004
|
|
#define EM_MSIX_BAR 3 /* On 82575 */
|
|
|
|
/* More backward compatibility */
|
|
#if __FreeBSD_version < 900000
|
|
#define SYSCTL_ADD_UQUAD SYSCTL_ADD_QUAD
|
|
#endif
|
|
|
|
/* Defines for printing debug information */
|
|
#define DEBUG_INIT 0
|
|
#define DEBUG_IOCTL 0
|
|
#define DEBUG_HW 0
|
|
|
|
#define INIT_DEBUGOUT(S) if (DEBUG_INIT) printf(S "\n")
|
|
#define INIT_DEBUGOUT1(S, A) if (DEBUG_INIT) printf(S "\n", A)
|
|
#define INIT_DEBUGOUT2(S, A, B) if (DEBUG_INIT) printf(S "\n", A, B)
|
|
#define IOCTL_DEBUGOUT(S) if (DEBUG_IOCTL) printf(S "\n")
|
|
#define IOCTL_DEBUGOUT1(S, A) if (DEBUG_IOCTL) printf(S "\n", A)
|
|
#define IOCTL_DEBUGOUT2(S, A, B) if (DEBUG_IOCTL) printf(S "\n", A, B)
|
|
#define HW_DEBUGOUT(S) if (DEBUG_HW) printf(S "\n")
|
|
#define HW_DEBUGOUT1(S, A) if (DEBUG_HW) printf(S "\n", A)
|
|
#define HW_DEBUGOUT2(S, A, B) if (DEBUG_HW) printf(S "\n", A, B)
|
|
|
|
#define EM_MAX_SCATTER 40
|
|
#define EM_VFTA_SIZE 128
|
|
#define EM_TSO_SIZE 65535
|
|
#define EM_TSO_SEG_SIZE 4096 /* Max dma segment size */
|
|
#define EM_MSIX_MASK 0x01F00000 /* For 82574 use */
|
|
#define EM_MSIX_LINK 0x01000000 /* For 82574 use */
|
|
#define ETH_ZLEN 60
|
|
#define EM_CSUM_OFFLOAD (CSUM_IP | CSUM_IP_UDP | CSUM_IP_TCP) /* Offload bits in mbuf flag */
|
|
#define IGB_CSUM_OFFLOAD (CSUM_IP | CSUM_IP_UDP | CSUM_IP_TCP | \
|
|
CSUM_IP_SCTP | CSUM_IP6_UDP | CSUM_IP6_TCP | \
|
|
CSUM_IP6_SCTP) /* Offload bits in mbuf flag */
|
|
|
|
|
|
#define IGB_PKTTYPE_MASK 0x0000FFF0
|
|
#define IGB_DMCTLX_DCFLUSH_DIS 0x80000000 /* Disable DMA Coalesce Flush */
|
|
|
|
/*
|
|
* 82574 has a nonstandard address for EIAC
|
|
* and since its only used in MSI-X, and in
|
|
* the em driver only 82574 uses MSI-X we can
|
|
* solve it just using this define.
|
|
*/
|
|
#define EM_EIAC 0x000DC
|
|
/*
|
|
* 82574 only reports 3 MSI-X vectors by default;
|
|
* defines assisting with making it report 5 are
|
|
* located here.
|
|
*/
|
|
#define EM_NVM_PCIE_CTRL 0x1B
|
|
#define EM_NVM_MSIX_N_MASK (0x7 << EM_NVM_MSIX_N_SHIFT)
|
|
#define EM_NVM_MSIX_N_SHIFT 7
|
|
|
|
struct adapter;
|
|
|
|
struct em_int_delay_info {
|
|
struct adapter *adapter; /* Back-pointer to the adapter struct */
|
|
int offset; /* Register offset to read/write */
|
|
int value; /* Current value in usecs */
|
|
};
|
|
|
|
/*
|
|
* The transmit ring, one per tx queue
|
|
*/
|
|
struct tx_ring {
|
|
struct adapter *adapter;
|
|
struct e1000_tx_desc *tx_base;
|
|
uint64_t tx_paddr;
|
|
qidx_t *tx_rsq;
|
|
bool tx_tso; /* last tx was tso */
|
|
uint8_t me;
|
|
qidx_t tx_rs_cidx;
|
|
qidx_t tx_rs_pidx;
|
|
qidx_t tx_cidx_processed;
|
|
/* Interrupt resources */
|
|
void *tag;
|
|
struct resource *res;
|
|
unsigned long tx_irq;
|
|
|
|
/* Saved csum offloading context information */
|
|
int csum_flags;
|
|
int csum_lhlen;
|
|
int csum_iphlen;
|
|
|
|
int csum_thlen;
|
|
int csum_mss;
|
|
int csum_pktlen;
|
|
|
|
uint32_t csum_txd_upper;
|
|
uint32_t csum_txd_lower; /* last field */
|
|
};
|
|
|
|
/*
|
|
* The Receive ring, one per rx queue
|
|
*/
|
|
struct rx_ring {
|
|
struct adapter *adapter;
|
|
struct em_rx_queue *que;
|
|
u32 me;
|
|
u32 payload;
|
|
union e1000_rx_desc_extended *rx_base;
|
|
uint64_t rx_paddr;
|
|
|
|
/* Interrupt resources */
|
|
void *tag;
|
|
struct resource *res;
|
|
bool discard;
|
|
|
|
/* Soft stats */
|
|
unsigned long rx_irq;
|
|
unsigned long rx_discarded;
|
|
unsigned long rx_packets;
|
|
unsigned long rx_bytes;
|
|
};
|
|
|
|
struct em_tx_queue {
|
|
struct adapter *adapter;
|
|
u32 msix;
|
|
u32 eims; /* This queue's EIMS bit */
|
|
u32 me;
|
|
struct tx_ring txr;
|
|
};
|
|
|
|
struct em_rx_queue {
|
|
struct adapter *adapter;
|
|
u32 me;
|
|
u32 msix;
|
|
u32 eims;
|
|
struct rx_ring rxr;
|
|
u64 irqs;
|
|
struct if_irq que_irq;
|
|
};
|
|
|
|
/* Our adapter structure */
|
|
struct adapter {
|
|
struct ifnet *ifp;
|
|
struct e1000_hw hw;
|
|
|
|
if_softc_ctx_t shared;
|
|
if_ctx_t ctx;
|
|
#define tx_num_queues shared->isc_ntxqsets
|
|
#define rx_num_queues shared->isc_nrxqsets
|
|
#define intr_type shared->isc_intr
|
|
/* FreeBSD operating-system-specific structures. */
|
|
struct e1000_osdep osdep;
|
|
device_t dev;
|
|
struct cdev *led_dev;
|
|
|
|
struct em_tx_queue *tx_queues;
|
|
struct em_rx_queue *rx_queues;
|
|
struct if_irq irq;
|
|
|
|
struct resource *memory;
|
|
struct resource *flash;
|
|
struct resource *ioport;
|
|
|
|
struct resource *res;
|
|
void *tag;
|
|
u32 linkvec;
|
|
u32 ivars;
|
|
|
|
struct ifmedia *media;
|
|
int msix;
|
|
int if_flags;
|
|
int em_insert_vlan_header;
|
|
u32 ims;
|
|
bool in_detach;
|
|
|
|
u32 flags;
|
|
/* Task for FAST handling */
|
|
struct grouptask link_task;
|
|
|
|
u16 num_vlans;
|
|
u32 txd_cmd;
|
|
|
|
u32 tx_process_limit;
|
|
u32 rx_process_limit;
|
|
u32 rx_mbuf_sz;
|
|
|
|
/* Management and WOL features */
|
|
u32 wol;
|
|
bool has_manage;
|
|
bool has_amt;
|
|
|
|
/* Multicast array memory */
|
|
u8 *mta;
|
|
|
|
/*
|
|
** Shadow VFTA table, this is needed because
|
|
** the real vlan filter table gets cleared during
|
|
** a soft reset and the driver needs to be able
|
|
** to repopulate it.
|
|
*/
|
|
u32 shadow_vfta[EM_VFTA_SIZE];
|
|
|
|
/* Info about the interface */
|
|
u16 link_active;
|
|
u16 fc;
|
|
u16 link_speed;
|
|
u16 link_duplex;
|
|
u32 smartspeed;
|
|
u32 dmac;
|
|
int link_mask;
|
|
|
|
u64 que_mask;
|
|
|
|
struct em_int_delay_info tx_int_delay;
|
|
struct em_int_delay_info tx_abs_int_delay;
|
|
struct em_int_delay_info rx_int_delay;
|
|
struct em_int_delay_info rx_abs_int_delay;
|
|
struct em_int_delay_info tx_itr;
|
|
|
|
/* Misc stats maintained by the driver */
|
|
unsigned long dropped_pkts;
|
|
unsigned long link_irq;
|
|
unsigned long rx_overruns;
|
|
unsigned long watchdog_events;
|
|
|
|
struct e1000_hw_stats stats;
|
|
u16 vf_ifp;
|
|
};
|
|
|
|
/********************************************************************************
|
|
* vendor_info_array
|
|
*
|
|
* This array contains the list of Subvendor/Subdevice IDs on which the driver
|
|
* should load.
|
|
*
|
|
********************************************************************************/
|
|
typedef struct _em_vendor_info_t {
|
|
unsigned int vendor_id;
|
|
unsigned int device_id;
|
|
unsigned int subvendor_id;
|
|
unsigned int subdevice_id;
|
|
unsigned int index;
|
|
} em_vendor_info_t;
|
|
|
|
void em_dump_rs(struct adapter *);
|
|
|
|
#define EM_RSSRK_SIZE 4
|
|
#define EM_RSSRK_VAL(key, i) (key[(i) * EM_RSSRK_SIZE] | \
|
|
key[(i) * EM_RSSRK_SIZE + 1] << 8 | \
|
|
key[(i) * EM_RSSRK_SIZE + 2] << 16 | \
|
|
key[(i) * EM_RSSRK_SIZE + 3] << 24)
|
|
#endif /* _EM_H_DEFINED_ */
|