a0f70ac053
deltas, but it is possible since I had a few merge conflicts over the last few days while this has been sitting ready to go. (Part 1 was committed to the config files, but cvs aborted grrr..) Approved by: core
300 lines
6.4 KiB
C
300 lines
6.4 KiB
C
/*
|
|
* sound/sb16_midi.c
|
|
*
|
|
* The low level driver for the MPU-401 UART emulation of the SB16.
|
|
*
|
|
* Copyright by Hannu Savolainen 1993
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are
|
|
* met: 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer. 2.
|
|
* Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY
|
|
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
#include <i386/isa/sound/sound_config.h>
|
|
#include <i386/isa/sound/sbcard.h>
|
|
|
|
#if defined(CONFIG_SB) && defined(CONFIG_SB16) && defined(CONFIG_MIDI)
|
|
|
|
#include "sb.h"
|
|
|
|
#define DATAPORT (sb16midi_base)
|
|
#define COMDPORT (sb16midi_base+1)
|
|
#define STATPORT (sb16midi_base+1)
|
|
|
|
extern sound_os_info *sb_osp;
|
|
|
|
#define sb16midi_status() inb( STATPORT)
|
|
#define input_avail() (!(sb16midi_status()&INPUT_AVAIL))
|
|
#define output_ready() (!(sb16midi_status()&OUTPUT_READY))
|
|
#define sb16midi_cmd(cmd) outb( COMDPORT, cmd)
|
|
#define sb16midi_read() inb( DATAPORT)
|
|
#define sb16midi_write(byte) outb( DATAPORT, byte)
|
|
|
|
#define OUTPUT_READY 0x40
|
|
#define INPUT_AVAIL 0x80
|
|
#define MPU_ACK 0xFE
|
|
#define MPU_RESET 0xFF
|
|
#define UART_MODE_ON 0x3F
|
|
|
|
static int sb16midi_opened = 0;
|
|
static int sb16midi_base = 0x330;
|
|
static int sb16midi_detected = 0;
|
|
static int my_dev;
|
|
extern int sbc_base;
|
|
|
|
static int reset_sb16midi(void);
|
|
static void (*midi_input_intr) (int dev, u_char data);
|
|
static volatile u_char input_byte;
|
|
|
|
static void
|
|
sb16midi_input_loop(void)
|
|
{
|
|
while (input_avail()) {
|
|
u_char c = sb16midi_read();
|
|
|
|
if (c == MPU_ACK)
|
|
input_byte = c;
|
|
else if (sb16midi_opened & OPEN_READ && midi_input_intr)
|
|
midi_input_intr(my_dev, c);
|
|
}
|
|
}
|
|
|
|
void
|
|
sb16midiintr(int unit)
|
|
{
|
|
if (input_avail())
|
|
sb16midi_input_loop();
|
|
}
|
|
|
|
static int
|
|
sb16midi_open(int dev, int mode,
|
|
void (*input) (int dev, u_char data),
|
|
void (*output) (int dev)
|
|
)
|
|
{
|
|
if (sb16midi_opened) {
|
|
return -(EBUSY);
|
|
}
|
|
sb16midi_input_loop();
|
|
|
|
midi_input_intr = input;
|
|
sb16midi_opened = mode;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
sb16midi_close(int dev)
|
|
{
|
|
sb16midi_opened = 0;
|
|
}
|
|
|
|
static int
|
|
sb16midi_out(int dev, u_char midi_byte)
|
|
{
|
|
int timeout;
|
|
u_long flags;
|
|
|
|
/*
|
|
* Test for input since pending input seems to block the output.
|
|
*/
|
|
|
|
flags = splhigh();
|
|
|
|
if (input_avail())
|
|
sb16midi_input_loop();
|
|
|
|
splx(flags);
|
|
|
|
/*
|
|
* Sometimes it takes about 13000 loops before the output becomes
|
|
* ready (After reset). Normally it takes just about 10 loops.
|
|
*/
|
|
|
|
for (timeout = 30000; timeout > 0 && !output_ready(); timeout--); /* Wait */
|
|
|
|
if (!output_ready()) {
|
|
printf("MPU-401: Timeout\n");
|
|
return 0;
|
|
}
|
|
sb16midi_write(midi_byte);
|
|
return 1;
|
|
}
|
|
|
|
static int
|
|
sb16midi_start_read(int dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
sb16midi_end_read(int dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
sb16midi_ioctl(int dev, u_int cmd, ioctl_arg arg)
|
|
{
|
|
return -(EINVAL);
|
|
}
|
|
|
|
static void
|
|
sb16midi_kick(int dev)
|
|
{
|
|
}
|
|
|
|
static int
|
|
sb16midi_buffer_status(int dev)
|
|
{
|
|
return 0; /* No data in buffers */
|
|
}
|
|
|
|
#define MIDI_SYNTH_NAME "SoundBlaster 16 Midi"
|
|
#define MIDI_SYNTH_CAPS SYNTH_CAP_INPUT
|
|
#include <i386/isa/sound/midi_synth.h>
|
|
|
|
static struct midi_operations sb16midi_operations =
|
|
{
|
|
{"SoundBlaster 16 Midi", 0, 0, SNDCARD_SB16MIDI},
|
|
&std_midi_synth,
|
|
{0},
|
|
sb16midi_open,
|
|
sb16midi_close,
|
|
sb16midi_ioctl,
|
|
sb16midi_out,
|
|
sb16midi_start_read,
|
|
sb16midi_end_read,
|
|
sb16midi_kick,
|
|
NULL,
|
|
sb16midi_buffer_status,
|
|
NULL
|
|
};
|
|
|
|
|
|
void
|
|
attach_sb16midi(struct address_info * hw_config)
|
|
{
|
|
int ok, timeout;
|
|
u_long flags;
|
|
|
|
sb16midi_base = hw_config->io_base;
|
|
|
|
if (!sb16midi_detected)
|
|
return;
|
|
|
|
flags = splhigh();
|
|
for (timeout = 30000; timeout < 0 && !output_ready(); timeout--); /* Wait */
|
|
input_byte = 0;
|
|
sb16midi_cmd(UART_MODE_ON);
|
|
|
|
ok = 0;
|
|
for (timeout = 50000; timeout > 0 && !ok; timeout--)
|
|
if (input_byte == MPU_ACK)
|
|
ok = 1;
|
|
else if (input_avail())
|
|
if (sb16midi_read() == MPU_ACK)
|
|
ok = 1;
|
|
|
|
splx(flags);
|
|
|
|
if (num_midis >= MAX_MIDI_DEV) {
|
|
printf("Sound: Too many midi devices detected\n");
|
|
return;
|
|
}
|
|
|
|
conf_printf("SoundBlaster MPU-401", hw_config);
|
|
std_midi_synth.midi_dev = my_dev = num_midis;
|
|
midi_devs[num_midis++] = &sb16midi_operations;
|
|
return;
|
|
}
|
|
|
|
static int
|
|
reset_sb16midi(void)
|
|
{
|
|
int ok, timeout, n;
|
|
|
|
/*
|
|
* Send the RESET command. Try again if no success at the first time.
|
|
*/
|
|
|
|
if (inb(STATPORT) == 0xff)
|
|
return 0;
|
|
|
|
ok = 0;
|
|
|
|
/* flags = splhigh(); */
|
|
|
|
for (n = 0; n < 2 && !ok; n++) {
|
|
for (timeout = 30000; timeout < 0 && !output_ready(); timeout--); /* Wait */
|
|
input_byte = 0;
|
|
sb16midi_cmd(MPU_RESET); /* Send MPU-401 RESET Command */
|
|
|
|
/*
|
|
* Wait at least 25 msec. This method is not accurate so
|
|
* let's make the loop bit longer. Cannot sleep since this is
|
|
* called during boot.
|
|
*/
|
|
|
|
for (timeout = 50000; timeout > 0 && !ok; timeout--)
|
|
if (input_byte == MPU_ACK) /* Interrupt */
|
|
ok = 1;
|
|
else if (input_avail())
|
|
if (sb16midi_read() == MPU_ACK)
|
|
ok = 1;
|
|
|
|
}
|
|
|
|
sb16midi_opened = 0;
|
|
if (ok)
|
|
sb16midi_input_loop(); /* Flush input before enabling
|
|
* interrupts */
|
|
|
|
/* splx(flags); */
|
|
|
|
return ok;
|
|
}
|
|
|
|
|
|
int
|
|
probe_sb16midi(struct address_info * hw_config)
|
|
{
|
|
int ok = 0;
|
|
struct address_info *sb_config;
|
|
|
|
if (sbc_major < 4)
|
|
return 0; /* Not a SB16 */
|
|
|
|
if (!(sb_config = sound_getconf(SNDCARD_SB))) {
|
|
printf("SB16 Error: Plain SB not configured\n");
|
|
return 0;
|
|
}
|
|
|
|
sb16midi_base = hw_config->io_base;
|
|
|
|
ok = reset_sb16midi();
|
|
|
|
sb16midi_detected = ok;
|
|
return ok;
|
|
}
|
|
|
|
#endif
|
|
|