88140f6436
or not the OS has to wait for RX_RDY or TX_RDY to be set before the OS sets the control code in the control/status register. Looking at the interface design, it seems that RX_RDY and TX_RDY are probably there to protect access to the data register and have nothing to do with the control/status register. Nevertheless, try to take what I think is the more conservative approach and always wait for the appropriate [TR]X_RDY flag to be set before writing any of the WR_NEXT, WR_END, RD_START, or RD_NEXT control codes to the control/status register.
408 lines
9.7 KiB
C
408 lines
9.7 KiB
C
/*-
|
|
* Copyright (c) 2006 IronPort Systems Inc. <ambrisko@ironport.com>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/condvar.h>
|
|
#include <sys/eventhandler.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/kthread.h>
|
|
#include <sys/module.h>
|
|
#include <sys/rman.h>
|
|
#include <sys/selinfo.h>
|
|
#include <machine/bus.h>
|
|
|
|
#ifdef LOCAL_MODULE
|
|
#include <ipmi.h>
|
|
#include <ipmivars.h>
|
|
#else
|
|
#include <sys/ipmi.h>
|
|
#include <dev/ipmi/ipmivars.h>
|
|
#endif
|
|
|
|
static void smic_wait_for_tx_okay(struct ipmi_softc *);
|
|
static void smic_wait_for_rx_okay(struct ipmi_softc *);
|
|
static void smic_wait_for_not_busy(struct ipmi_softc *);
|
|
static void smic_set_busy(struct ipmi_softc *);
|
|
|
|
static void
|
|
smic_wait_for_tx_okay(struct ipmi_softc *sc)
|
|
{
|
|
int flags;
|
|
|
|
do {
|
|
flags = INB(sc, SMIC_FLAGS);
|
|
} while (!(flags & SMIC_STATUS_TX_RDY));
|
|
}
|
|
|
|
static void
|
|
smic_wait_for_rx_okay(struct ipmi_softc *sc)
|
|
{
|
|
int flags;
|
|
|
|
do {
|
|
flags = INB(sc, SMIC_FLAGS);
|
|
} while (!(flags & SMIC_STATUS_RX_RDY));
|
|
}
|
|
|
|
static void
|
|
smic_wait_for_not_busy(struct ipmi_softc *sc)
|
|
{
|
|
int flags;
|
|
|
|
do {
|
|
flags = INB(sc, SMIC_FLAGS);
|
|
} while (flags & SMIC_STATUS_BUSY);
|
|
}
|
|
|
|
static void
|
|
smic_set_busy(struct ipmi_softc *sc)
|
|
{
|
|
int flags;
|
|
|
|
flags = INB(sc, SMIC_FLAGS);
|
|
flags |= SMIC_STATUS_BUSY;
|
|
flags &= ~SMIC_STATUS_RESERVED;
|
|
OUTB(sc, SMIC_FLAGS, flags);
|
|
}
|
|
|
|
/*
|
|
* Start a transfer with a WR_START transaction that sends the NetFn/LUN
|
|
* address.
|
|
*/
|
|
static int
|
|
smic_start_write(struct ipmi_softc *sc, u_char data)
|
|
{
|
|
u_char error, status;
|
|
|
|
smic_wait_for_not_busy(sc);
|
|
|
|
OUTB(sc, SMIC_CTL_STS, SMIC_CC_SMS_WR_START);
|
|
OUTB(sc, SMIC_DATA, data);
|
|
smic_set_busy(sc);
|
|
smic_wait_for_not_busy(sc);
|
|
status = INB(sc, SMIC_CTL_STS);
|
|
if (status != SMIC_SC_SMS_WR_START) {
|
|
error = INB(sc, SMIC_DATA);
|
|
device_printf(sc->ipmi_dev, "SMIC: Write did not start %02x\n",
|
|
error);
|
|
return (0);
|
|
}
|
|
return (1);
|
|
}
|
|
|
|
/*
|
|
* Write a byte in the middle of the message (either the command or one of
|
|
* the data bytes) using a WR_NEXT transaction.
|
|
*/
|
|
static int
|
|
smic_write_next(struct ipmi_softc *sc, u_char data)
|
|
{
|
|
u_char error, status;
|
|
|
|
smic_wait_for_tx_okay(sc);
|
|
OUTB(sc, SMIC_CTL_STS, SMIC_CC_SMS_WR_NEXT);
|
|
OUTB(sc, SMIC_DATA, data);
|
|
smic_set_busy(sc);
|
|
smic_wait_for_not_busy(sc);
|
|
status = INB(sc, SMIC_CTL_STS);
|
|
if (status != SMIC_SC_SMS_WR_NEXT) {
|
|
error = INB(sc, SMIC_DATA);
|
|
device_printf(sc->ipmi_dev, "SMIC: Write did not next %02x\n",
|
|
error);
|
|
return (0);
|
|
}
|
|
return (1);
|
|
}
|
|
|
|
/*
|
|
* Write the last byte of a transfer to end the write phase via a WR_END
|
|
* transaction.
|
|
*/
|
|
static int
|
|
smic_write_last(struct ipmi_softc *sc, u_char data)
|
|
{
|
|
u_char error, status;
|
|
|
|
smic_wait_for_tx_okay(sc);
|
|
OUTB(sc, SMIC_CTL_STS, SMIC_CC_SMS_WR_END);
|
|
OUTB(sc, SMIC_DATA, data);
|
|
smic_set_busy(sc);
|
|
smic_wait_for_not_busy(sc);
|
|
status = INB(sc, SMIC_CTL_STS);
|
|
if (status != SMIC_SC_SMS_WR_END) {
|
|
error = INB(sc, SMIC_DATA);
|
|
device_printf(sc->ipmi_dev, "SMIC: Write did not end %02x\n",
|
|
error);
|
|
return (0);
|
|
}
|
|
return (1);
|
|
}
|
|
|
|
/*
|
|
* Start the read phase of a transfer with a RD_START transaction.
|
|
*/
|
|
static int
|
|
smic_start_read(struct ipmi_softc *sc, u_char *data)
|
|
{
|
|
u_char error, status;
|
|
|
|
smic_wait_for_not_busy(sc);
|
|
|
|
smic_wait_for_rx_okay(sc);
|
|
OUTB(sc, SMIC_CTL_STS, SMIC_CC_SMS_RD_START);
|
|
smic_set_busy(sc);
|
|
smic_wait_for_not_busy(sc);
|
|
status = INB(sc, SMIC_CTL_STS);
|
|
if (status != SMIC_SC_SMS_RD_START) {
|
|
error = INB(sc, SMIC_DATA);
|
|
device_printf(sc->ipmi_dev, "SMIC: Read did not start %02x\n",
|
|
error);
|
|
return (0);
|
|
}
|
|
*data = INB(sc, SMIC_DATA);
|
|
return (1);
|
|
}
|
|
|
|
/*
|
|
* Read a byte via a RD_NEXT transaction. If this was the last byte, return
|
|
* 2 rather than 1.
|
|
*/
|
|
static int
|
|
smic_read_byte(struct ipmi_softc *sc, u_char *data)
|
|
{
|
|
u_char error, status;
|
|
|
|
smic_wait_for_rx_okay(sc);
|
|
OUTB(sc, SMIC_CTL_STS, SMIC_SC_SMS_RD_NEXT);
|
|
smic_set_busy(sc);
|
|
smic_wait_for_not_busy(sc);
|
|
status = INB(sc, SMIC_CTL_STS);
|
|
if (status != SMIC_SC_SMS_RD_NEXT &&
|
|
status != SMIC_SC_SMS_RD_END) {
|
|
error = INB(sc, SMIC_DATA);
|
|
device_printf(sc->ipmi_dev, "SMIC: Read did not next %02x\n",
|
|
error);
|
|
return (0);
|
|
}
|
|
*data = INB(sc, SMIC_DATA);
|
|
if (status == SMIC_SC_SMS_RD_NEXT)
|
|
return (1);
|
|
else
|
|
return (2);
|
|
}
|
|
|
|
/* Complete a transfer via a RD_END transaction after reading the last byte. */
|
|
static int
|
|
smic_read_end(struct ipmi_softc *sc)
|
|
{
|
|
u_char error, status;
|
|
|
|
OUTB(sc, SMIC_CTL_STS, SMIC_CC_SMS_RD_END);
|
|
smic_set_busy(sc);
|
|
smic_wait_for_not_busy(sc);
|
|
status = INB(sc, SMIC_CTL_STS);
|
|
if (status != SMIC_SC_SMS_RDY) {
|
|
error = INB(sc, SMIC_DATA);
|
|
device_printf(sc->ipmi_dev, "SMIC: Read did not end %02x\n",
|
|
error);
|
|
return (0);
|
|
}
|
|
return (1);
|
|
}
|
|
|
|
static int
|
|
smic_polled_request(struct ipmi_softc *sc, struct ipmi_request *req)
|
|
{
|
|
u_char *cp, data;
|
|
int i, state;
|
|
|
|
/* First, start the message with the address. */
|
|
if (!smic_start_write(sc, req->ir_addr))
|
|
return (0);
|
|
#ifdef SMIC_DEBUG
|
|
device_printf(sc->ipmi_dev, "SMIC: WRITE_START address: %02x\n",
|
|
req->ir_addr);
|
|
#endif
|
|
|
|
if (req->ir_requestlen == 0) {
|
|
/* Send the command as the last byte. */
|
|
if (!smic_write_last(sc, req->ir_command))
|
|
return (0);
|
|
#ifdef SMIC_DEBUG
|
|
device_printf(sc->ipmi_dev, "SMIC: Wrote command: %02x\n",
|
|
req->ir_command);
|
|
#endif
|
|
} else {
|
|
/* Send the command. */
|
|
if (!smic_write_next(sc, req->ir_command))
|
|
return (0);
|
|
#ifdef SMIC_DEBUG
|
|
device_printf(sc->ipmi_dev, "SMIC: Wrote command: %02x\n",
|
|
req->ir_command);
|
|
#endif
|
|
|
|
/* Send the payload. */
|
|
cp = req->ir_request;
|
|
for (i = 0; i < req->ir_requestlen - 1; i++) {
|
|
if (!smic_write_next(sc, *cp++))
|
|
return (0);
|
|
#ifdef SMIC_DEBUG
|
|
device_printf(sc->ipmi_dev, "SMIC: Wrote data: %02x\n",
|
|
cp[-1]);
|
|
#endif
|
|
}
|
|
if (!smic_write_last(sc, *cp))
|
|
return (0);
|
|
#ifdef SMIC_DEBUG
|
|
device_printf(sc->ipmi_dev, "SMIC: Write last data: %02x\n",
|
|
*cp);
|
|
#endif
|
|
}
|
|
|
|
/* Start the read phase by reading the NetFn/LUN. */
|
|
if (smic_start_read(sc, &data) != 1)
|
|
return (0);
|
|
#ifdef SMIC_DEBUG
|
|
device_printf(sc->ipmi_dev, "SMIC: Read address: %02x\n", data);
|
|
#endif
|
|
if (data != IPMI_REPLY_ADDR(req->ir_addr)) {
|
|
device_printf(sc->ipmi_dev, "SMIC: Reply address mismatch\n");
|
|
return (0);
|
|
}
|
|
|
|
/* Read the command. */
|
|
if (smic_read_byte(sc, &data) != 1)
|
|
return (0);
|
|
#ifdef SMIC_DEBUG
|
|
device_printf(sc->ipmi_dev, "SMIC: Read command: %02x\n", data);
|
|
#endif
|
|
if (data != req->ir_command) {
|
|
device_printf(sc->ipmi_dev, "SMIC: Command mismatch\n");
|
|
return (0);
|
|
}
|
|
|
|
/* Read the completion code. */
|
|
state = smic_read_byte(sc, &req->ir_compcode);
|
|
if (state == 0)
|
|
return (0);
|
|
#ifdef SMIC_DEBUG
|
|
device_printf(sc->ipmi_dev, "SMIC: Read completion code: %02x\n",
|
|
req->ir_compcode);
|
|
#endif
|
|
|
|
/* Finally, read the reply from the BMC. */
|
|
i = 0;
|
|
while (state == 1) {
|
|
state = smic_read_byte(sc, &data);
|
|
if (state == 0)
|
|
return (0);
|
|
if (i < req->ir_replybuflen) {
|
|
req->ir_reply[i] = data;
|
|
#ifdef SMIC_DEBUG
|
|
device_printf(sc->ipmi_dev, "SMIC: Read data: %02x\n",
|
|
data);
|
|
} else {
|
|
device_printf(sc->ipmi_dev,
|
|
"SMIC: Read short %02x byte %d\n", data, i + 1);
|
|
#endif
|
|
}
|
|
i++;
|
|
}
|
|
|
|
/* Terminate the transfer. */
|
|
if (!smic_read_end(sc))
|
|
return (0);
|
|
req->ir_replylen = i;
|
|
#ifdef SMIC_DEBUG
|
|
device_printf(sc->ipmi_dev, "SMIC: READ finished (%d bytes)\n", i);
|
|
if (req->ir_replybuflen < i)
|
|
#else
|
|
if (req->ir_replybuflen < i && req->ir_replybuflen != 0)
|
|
#endif
|
|
device_printf(sc->ipmi_dev,
|
|
"SMIC: Read short: %zd buffer, %d actual\n",
|
|
req->ir_replybuflen, i);
|
|
return (1);
|
|
}
|
|
|
|
static void
|
|
smic_loop(void *arg)
|
|
{
|
|
struct ipmi_softc *sc = arg;
|
|
struct ipmi_request *req;
|
|
int i, ok;
|
|
|
|
IPMI_LOCK(sc);
|
|
while ((req = ipmi_dequeue_request(sc)) != NULL) {
|
|
ok = 0;
|
|
for (i = 0; i < 3 && !ok; i++)
|
|
ok = smic_polled_request(sc, req);
|
|
if (ok)
|
|
req->ir_error = 0;
|
|
else
|
|
req->ir_error = EIO;
|
|
ipmi_complete_request(sc, req);
|
|
}
|
|
IPMI_UNLOCK(sc);
|
|
kthread_exit(0);
|
|
}
|
|
|
|
static int
|
|
smic_startup(struct ipmi_softc *sc)
|
|
{
|
|
|
|
return (kthread_create(smic_loop, sc, &sc->ipmi_kthread, 0, 0,
|
|
"%s: smic", device_get_nameunit(sc->ipmi_dev)));
|
|
}
|
|
|
|
int
|
|
ipmi_smic_attach(struct ipmi_softc *sc)
|
|
{
|
|
int flags;
|
|
|
|
/* Setup function pointers. */
|
|
sc->ipmi_startup = smic_startup;
|
|
sc->ipmi_enqueue_request = ipmi_polled_enqueue_request;
|
|
|
|
/* See if we can talk to the controller. */
|
|
flags = INB(sc, SMIC_FLAGS);
|
|
if (flags == 0xff) {
|
|
device_printf(sc->ipmi_dev, "couldn't find it\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
#ifdef SMIC_DEBUG
|
|
device_printf(sc->ipmi_dev, "SMIC: initial state: %02x\n", flags);
|
|
#endif
|
|
|
|
return (0);
|
|
}
|