d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4a92afae7f
freebsd-skq/sys/dev/mps/mps_mapping.c
Alexander Motin b99419aee4 mpr/mps(4): Make device mapping some more robust. 
Allow new enclosure to replace previously existing one if there is
no completely unused table entry, same as it is done for devices.

If we can not process DPM due to corruption -- wipe it and restart
from scratch.  Otherwise I don't see a way to recover persistence if
something go wrong and there is no BIOS to recover it for us.

Together this solves a problem that appeared when 9300-8i firmware
update to 16.00.10.00 somehow switched its mapping mode from Device
Persistence to Enclosure/Slot without wiping the DPM table.  It made
HBA completely unusable, since overflowed and conflicting mapping
table was unable to map any of enclosures and so devices.

Also while there make some enclosure mapping errors more informative.

MFC after:	1 month
Sponsored by:	iXsystems, Inc.
2021-04-23 23:36:51 -04:00

2687 lines
85 KiB
C
Raw Blame History

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2011-2015 LSI Corp.
* Copyright (c) 2013-2015 Avago Technologies
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/* TODO Move headers to mpsvar */
#include <sys/types.h>
#include <sys/param.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/kthread.h>
#include <sys/taskqueue.h>
#include <sys/bus.h>
#include <sys/endian.h>
#include <sys/sysctl.h>
#include <sys/sbuf.h>
#include <sys/eventhandler.h>
#include <sys/uio.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <dev/mps/mpi/mpi2_type.h>
#include <dev/mps/mpi/mpi2.h>
#include <dev/mps/mpi/mpi2_ioc.h>
#include <dev/mps/mpi/mpi2_sas.h>
#include <dev/mps/mpi/mpi2_cnfg.h>
#include <dev/mps/mpi/mpi2_init.h>
#include <dev/mps/mpi/mpi2_tool.h>
#include <dev/mps/mps_ioctl.h>
#include <dev/mps/mpsvar.h>
#include <dev/mps/mps_mapping.h>
/**
* _mapping_clear_map_entry - Clear a particular mapping entry.
* @map_entry: map table entry
*
* Returns nothing.
*/
static inline void
_mapping_clear_map_entry(struct dev_mapping_table *map_entry)
{
map_entry->physical_id = 0;
map_entry->device_info = 0;
map_entry->phy_bits = 0;
map_entry->dpm_entry_num = MPS_DPM_BAD_IDX;
map_entry->dev_handle = 0;
map_entry->id = -1;
map_entry->missing_count = 0;
map_entry->init_complete = 0;
map_entry->TLR_bits = (u8)MPI2_SCSIIO_CONTROL_NO_TLR;
}
/**
* _mapping_clear_enc_entry - Clear a particular enclosure table entry.
* @enc_entry: enclosure table entry
*
* Returns nothing.
*/
static inline void
_mapping_clear_enc_entry(struct enc_mapping_table *enc_entry)
{
enc_entry->enclosure_id = 0;
enc_entry->start_index = MPS_MAPTABLE_BAD_IDX;
enc_entry->phy_bits = 0;
enc_entry->dpm_entry_num = MPS_DPM_BAD_IDX;
enc_entry->enc_handle = 0;
enc_entry->num_slots = 0;
enc_entry->start_slot = 0;
enc_entry->missing_count = 0;
enc_entry->removal_flag = 0;
enc_entry->skip_search = 0;
enc_entry->init_complete = 0;
}
/**
* _mapping_commit_enc_entry - write a particular enc entry in DPM page0.
* @sc: per adapter object
* @enc_entry: enclosure table entry
*
* Returns 0 for success, non-zero for failure.
*/
static int
_mapping_commit_enc_entry(struct mps_softc *sc,
struct enc_mapping_table *et_entry)
{
Mpi2DriverMap0Entry_t *dpm_entry;
struct dev_mapping_table *mt_entry;
Mpi2ConfigReply_t mpi_reply;
Mpi2DriverMappingPage0_t config_page;
if (!sc->is_dpm_enable)
return 0;
memset(&config_page, 0, sizeof(Mpi2DriverMappingPage0_t));
memcpy(&config_page.Header, (u8 *) sc->dpm_pg0,
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *)sc->dpm_pg0 +
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
dpm_entry += et_entry->dpm_entry_num;
dpm_entry->PhysicalIdentifier.Low =
( 0xFFFFFFFF & et_entry->enclosure_id);
dpm_entry->PhysicalIdentifier.High =
( et_entry->enclosure_id >> 32);
mt_entry = &sc->mapping_table[et_entry->start_index];
dpm_entry->DeviceIndex = htole16(mt_entry->id);
dpm_entry->MappingInformation = et_entry->num_slots;
dpm_entry->MappingInformation <<= MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT;
dpm_entry->MappingInformation |= et_entry->missing_count;
dpm_entry->MappingInformation = htole16(dpm_entry->MappingInformation);
dpm_entry->PhysicalBitsMapping = htole32(et_entry->phy_bits);
dpm_entry->Reserved1 = 0;
mps_dprint(sc, MPS_MAPPING, "%s: Writing DPM entry %d for enclosure.\n",
__func__, et_entry->dpm_entry_num);
memcpy(&config_page.Entry, (u8 *)dpm_entry,
sizeof(Mpi2DriverMap0Entry_t));
if (mps_config_set_dpm_pg0(sc, &mpi_reply, &config_page,
et_entry->dpm_entry_num)) {
mps_dprint(sc, MPS_ERROR | MPS_MAPPING, "%s: Write of DPM "
"entry %d for enclosure failed.\n", __func__,
et_entry->dpm_entry_num);
dpm_entry->MappingInformation = le16toh(dpm_entry->
MappingInformation);
dpm_entry->DeviceIndex = le16toh(dpm_entry->DeviceIndex);
dpm_entry->PhysicalBitsMapping =
le32toh(dpm_entry->PhysicalBitsMapping);
return -1;
}
dpm_entry->MappingInformation = le16toh(dpm_entry->
MappingInformation);
dpm_entry->DeviceIndex = le16toh(dpm_entry->DeviceIndex);
dpm_entry->PhysicalBitsMapping =
le32toh(dpm_entry->PhysicalBitsMapping);
return 0;
}
/**
* _mapping_commit_map_entry - write a particular map table entry in DPM page0.
* @sc: per adapter object
* @mt_entry: mapping table entry
*
* Returns 0 for success, non-zero for failure.
*/
static int
_mapping_commit_map_entry(struct mps_softc *sc,
struct dev_mapping_table *mt_entry)
{
Mpi2DriverMap0Entry_t *dpm_entry;
Mpi2ConfigReply_t mpi_reply;
Mpi2DriverMappingPage0_t config_page;
if (!sc->is_dpm_enable)
return 0;
/*
* It's possible that this Map Entry points to a BAD DPM index. This
* can happen if the Map Entry is a for a missing device and the DPM
* entry that was being used by this device is now being used by some
* new device. So, check for a BAD DPM index and just return if so.
*/
if (mt_entry->dpm_entry_num == MPS_DPM_BAD_IDX) {
mps_dprint(sc, MPS_MAPPING, "%s: DPM entry location for target "
"%d is invalid. DPM will not be written.\n", __func__,
mt_entry->id);
return 0;
}
memset(&config_page, 0, sizeof(Mpi2DriverMappingPage0_t));
memcpy(&config_page.Header, (u8 *)sc->dpm_pg0,
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *) sc->dpm_pg0 +
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
dpm_entry = dpm_entry + mt_entry->dpm_entry_num;
dpm_entry->PhysicalIdentifier.Low = (0xFFFFFFFF &
mt_entry->physical_id);
dpm_entry->PhysicalIdentifier.High = (mt_entry->physical_id >> 32);
dpm_entry->DeviceIndex = htole16(mt_entry->id);
dpm_entry->MappingInformation = htole16(mt_entry->missing_count);
dpm_entry->PhysicalBitsMapping = 0;
dpm_entry->Reserved1 = 0;
memcpy(&config_page.Entry, (u8 *)dpm_entry,
sizeof(Mpi2DriverMap0Entry_t));
mps_dprint(sc, MPS_MAPPING, "%s: Writing DPM entry %d for target %d.\n",
__func__, mt_entry->dpm_entry_num, mt_entry->id);
if (mps_config_set_dpm_pg0(sc, &mpi_reply, &config_page,
mt_entry->dpm_entry_num)) {
mps_dprint(sc, MPS_ERROR | MPS_MAPPING, "%s: Write of DPM "
"entry %d for target %d failed.\n", __func__,
mt_entry->dpm_entry_num, mt_entry->id);
dpm_entry->MappingInformation = le16toh(dpm_entry->
MappingInformation);
dpm_entry->DeviceIndex = le16toh(dpm_entry->DeviceIndex);
return -1;
}
dpm_entry->MappingInformation = le16toh(dpm_entry->MappingInformation);
dpm_entry->DeviceIndex = le16toh(dpm_entry->DeviceIndex);
return 0;
}
/**
* _mapping_get_ir_maprange - get start and end index for IR map range.
* @sc: per adapter object
* @start_idx: place holder for start index
* @end_idx: place holder for end index
*
* The IR volumes can be mapped either at start or end of the mapping table
* this function gets the detail of where IR volume mapping starts and ends
* in the device mapping table
*
* Returns nothing.
*/
static void
_mapping_get_ir_maprange(struct mps_softc *sc, u32 *start_idx, u32 *end_idx)
{
u16 volume_mapping_flags;
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
volume_mapping_flags = le16toh(sc->ioc_pg8.IRVolumeMappingFlags) &
MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
if (volume_mapping_flags == MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING) {
*start_idx = 0;
if (ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0)
*start_idx = 1;
} else
*start_idx = sc->max_devices - sc->max_volumes;
*end_idx = *start_idx + sc->max_volumes - 1;
}
/**
* _mapping_get_enc_idx_from_id - get enclosure index from enclosure ID
* @sc: per adapter object
* @enc_id: enclosure logical identifier
*
* Returns the index of enclosure entry on success or bad index.
*/
static u8
_mapping_get_enc_idx_from_id(struct mps_softc *sc, u64 enc_id,
u64 phy_bits)
{
struct enc_mapping_table *et_entry;
u8 enc_idx = 0;
for (enc_idx = 0; enc_idx < sc->num_enc_table_entries; enc_idx++) {
et_entry = &sc->enclosure_table[enc_idx];
if ((et_entry->enclosure_id == le64toh(enc_id)) &&
(!et_entry->phy_bits || (et_entry->phy_bits &
le32toh(phy_bits))))
return enc_idx;
}
return MPS_ENCTABLE_BAD_IDX;
}
/**
* _mapping_get_enc_idx_from_handle - get enclosure index from handle
* @sc: per adapter object
* @enc_id: enclosure handle
*
* Returns the index of enclosure entry on success or bad index.
*/
static u8
_mapping_get_enc_idx_from_handle(struct mps_softc *sc, u16 handle)
{
struct enc_mapping_table *et_entry;
u8 enc_idx = 0;
for (enc_idx = 0; enc_idx < sc->num_enc_table_entries; enc_idx++) {
et_entry = &sc->enclosure_table[enc_idx];
if (et_entry->missing_count)
continue;
if (et_entry->enc_handle == handle)
return enc_idx;
}
return MPS_ENCTABLE_BAD_IDX;
}
/**
* _mapping_get_high_missing_et_idx - get missing enclosure index
* @sc: per adapter object
*
* Search through the enclosure table and identifies the enclosure entry
* with high missing count and returns it's index
*
* Returns the index of enclosure entry on success or bad index.
*/
static u8
_mapping_get_high_missing_et_idx(struct mps_softc *sc)
{
struct enc_mapping_table *et_entry;
u8 high_missing_count = 0;
u8 enc_idx, high_idx = MPS_ENCTABLE_BAD_IDX;
for (enc_idx = 0; enc_idx < sc->num_enc_table_entries; enc_idx++) {
et_entry = &sc->enclosure_table[enc_idx];
if ((et_entry->missing_count > high_missing_count) &&
!et_entry->skip_search) {
high_missing_count = et_entry->missing_count;
high_idx = enc_idx;
}
}
return high_idx;
}
/**
* _mapping_get_high_missing_mt_idx - get missing map table index
* @sc: per adapter object
*
* Search through the map table and identifies the device entry
* with high missing count and returns it's index
*
* Returns the index of map table entry on success or bad index.
*/
static u32
_mapping_get_high_missing_mt_idx(struct mps_softc *sc)
{
u32 map_idx, high_idx = MPS_MAPTABLE_BAD_IDX;
u8 high_missing_count = 0;
u32 start_idx, end_idx, start_idx_ir, end_idx_ir;
struct dev_mapping_table *mt_entry;
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
start_idx = 0;
start_idx_ir = 0;
end_idx_ir = 0;
end_idx = sc->max_devices;
if (ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0)
start_idx = 1;
if (sc->ir_firmware) {
_mapping_get_ir_maprange(sc, &start_idx_ir, &end_idx_ir);
if (start_idx == start_idx_ir)
start_idx = end_idx_ir + 1;
else
end_idx = start_idx_ir;
}
mt_entry = &sc->mapping_table[start_idx];
for (map_idx = start_idx; map_idx < end_idx; map_idx++, mt_entry++) {
if (mt_entry->missing_count > high_missing_count) {
high_missing_count = mt_entry->missing_count;
high_idx = map_idx;
}
}
return high_idx;
}
/**
* _mapping_get_ir_mt_idx_from_wwid - get map table index from volume WWID
* @sc: per adapter object
* @wwid: world wide unique ID of the volume
*
* Returns the index of map table entry on success or bad index.
*/
static u32
_mapping_get_ir_mt_idx_from_wwid(struct mps_softc *sc, u64 wwid)
{
u32 start_idx, end_idx, map_idx;
struct dev_mapping_table *mt_entry;
_mapping_get_ir_maprange(sc, &start_idx, &end_idx);
mt_entry = &sc->mapping_table[start_idx];
for (map_idx = start_idx; map_idx <= end_idx; map_idx++, mt_entry++)
if (mt_entry->physical_id == wwid)
return map_idx;
return MPS_MAPTABLE_BAD_IDX;
}
/**
* _mapping_get_mt_idx_from_id - get map table index from a device ID
* @sc: per adapter object
* @dev_id: device identifer (SAS Address)
*
* Returns the index of map table entry on success or bad index.
*/
static u32
_mapping_get_mt_idx_from_id(struct mps_softc *sc, u64 dev_id)
{
u32 map_idx;
struct dev_mapping_table *mt_entry;
for (map_idx = 0; map_idx < sc->max_devices; map_idx++) {
mt_entry = &sc->mapping_table[map_idx];
if (mt_entry->physical_id == dev_id)
return map_idx;
}
return MPS_MAPTABLE_BAD_IDX;
}
/**
* _mapping_get_ir_mt_idx_from_handle - get map table index from volume handle
* @sc: per adapter object
* @wwid: volume device handle
*
* Returns the index of map table entry on success or bad index.
*/
static u32
_mapping_get_ir_mt_idx_from_handle(struct mps_softc *sc, u16 volHandle)
{
u32 start_idx, end_idx, map_idx;
struct dev_mapping_table *mt_entry;
_mapping_get_ir_maprange(sc, &start_idx, &end_idx);
mt_entry = &sc->mapping_table[start_idx];
for (map_idx = start_idx; map_idx <= end_idx; map_idx++, mt_entry++)
if (mt_entry->dev_handle == volHandle)
return map_idx;
return MPS_MAPTABLE_BAD_IDX;
}
/**
* _mapping_get_mt_idx_from_handle - get map table index from handle
* @sc: per adapter object
* @dev_id: device handle
*
* Returns the index of map table entry on success or bad index.
*/
static u32
_mapping_get_mt_idx_from_handle(struct mps_softc *sc, u16 handle)
{
u32 map_idx;
struct dev_mapping_table *mt_entry;
for (map_idx = 0; map_idx < sc->max_devices; map_idx++) {
mt_entry = &sc->mapping_table[map_idx];
if (mt_entry->dev_handle == handle)
return map_idx;
}
return MPS_MAPTABLE_BAD_IDX;
}
/**
* _mapping_get_free_ir_mt_idx - get first free index for a volume
* @sc: per adapter object
*
* Search through mapping table for free index for a volume and if no free
* index then looks for a volume with high mapping index
*
* Returns the index of map table entry on success or bad index.
*/
static u32
_mapping_get_free_ir_mt_idx(struct mps_softc *sc)
{
u8 high_missing_count = 0;
u32 start_idx, end_idx, map_idx;
u32 high_idx = MPS_MAPTABLE_BAD_IDX;
struct dev_mapping_table *mt_entry;
/*
* The IN_USE flag should be clear if the entry is available to use.
* This flag is cleared on initialization and and when a volume is
* deleted. All other times this flag should be set. If, for some
* reason, a free entry cannot be found, look for the entry with the
* highest missing count just in case there is one.
*/
_mapping_get_ir_maprange(sc, &start_idx, &end_idx);
mt_entry = &sc->mapping_table[start_idx];
for (map_idx = start_idx; map_idx <= end_idx; map_idx++, mt_entry++) {
if (!(mt_entry->device_info & MPS_MAP_IN_USE))
return map_idx;
if (mt_entry->missing_count > high_missing_count) {
high_missing_count = mt_entry->missing_count;
high_idx = map_idx;
}
}
if (high_idx == MPS_MAPTABLE_BAD_IDX) {
mps_dprint(sc, MPS_ERROR | MPS_MAPPING, "%s: Could not find a "
"free entry in the mapping table for a Volume. The mapping "
"table is probably corrupt.\n", __func__);
}
return high_idx;
}
/**
* _mapping_get_free_mt_idx - get first free index for a device
* @sc: per adapter object
* @start_idx: offset in the table to start search
*
* Returns the index of map table entry on success or bad index.
*/
static u32
_mapping_get_free_mt_idx(struct mps_softc *sc, u32 start_idx)
{
u32 map_idx, max_idx = sc->max_devices;
struct dev_mapping_table *mt_entry = &sc->mapping_table[start_idx];
u16 volume_mapping_flags;
volume_mapping_flags = le16toh(sc->ioc_pg8.IRVolumeMappingFlags) &
MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
if (sc->ir_firmware && (volume_mapping_flags ==
MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING))
max_idx -= sc->max_volumes;
for (map_idx = start_idx; map_idx < max_idx; map_idx++, mt_entry++)
if (!(mt_entry->device_info & (MPS_MAP_IN_USE |
MPS_DEV_RESERVED)))
return map_idx;
return MPS_MAPTABLE_BAD_IDX;
}
/**
* _mapping_get_dpm_idx_from_id - get DPM index from ID
* @sc: per adapter object
* @id: volume WWID or enclosure ID or device ID
*
* Returns the index of DPM entry on success or bad index.
*/
static u16
_mapping_get_dpm_idx_from_id(struct mps_softc *sc, u64 id, u32 phy_bits)
{
u16 entry_num;
uint64_t PhysicalIdentifier;
Mpi2DriverMap0Entry_t *dpm_entry;
dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *)sc->dpm_pg0 +
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
PhysicalIdentifier = dpm_entry->PhysicalIdentifier.High;
PhysicalIdentifier = (PhysicalIdentifier << 32) |
dpm_entry->PhysicalIdentifier.Low;
for (entry_num = 0; entry_num < sc->max_dpm_entries; entry_num++,
dpm_entry++)
if ((id == PhysicalIdentifier) &&
(!phy_bits || !dpm_entry->PhysicalBitsMapping ||
(phy_bits & dpm_entry->PhysicalBitsMapping)))
return entry_num;
return MPS_DPM_BAD_IDX;
}
/**
* _mapping_get_free_dpm_idx - get first available DPM index
* @sc: per adapter object
*
* Returns the index of DPM entry on success or bad index.
*/
static u32
_mapping_get_free_dpm_idx(struct mps_softc *sc)
{
u16 entry_num;
Mpi2DriverMap0Entry_t *dpm_entry;
u16 current_entry = MPS_DPM_BAD_IDX, missing_cnt, high_missing_cnt = 0;
u64 physical_id;
struct dev_mapping_table *mt_entry;
u32 map_idx;
for (entry_num = 0; entry_num < sc->max_dpm_entries; entry_num++) {
dpm_entry = (Mpi2DriverMap0Entry_t *) ((u8 *)sc->dpm_pg0 +
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
dpm_entry += entry_num;
missing_cnt = dpm_entry->MappingInformation &
MPI2_DRVMAP0_MAPINFO_MISSING_MASK;
/*
* If entry is used and not missing, then this entry can't be
* used. Look at next one.
*/
if (sc->dpm_entry_used[entry_num] && !missing_cnt)
continue;
/*
* If this entry is not used at all, then the missing count
* doesn't matter. Just use this one. Otherwise, keep looking
* and make sure the entry with the highest missing count is
* used.
*/
if (!sc->dpm_entry_used[entry_num]) {
current_entry = entry_num;
break;
}
if ((current_entry == MPS_DPM_BAD_IDX) ||
(missing_cnt > high_missing_cnt)) {
current_entry = entry_num;
high_missing_cnt = missing_cnt;
}
}
/*
* If an entry has been found to use and it's already marked as used
* it means that some device was already using this entry but it's
* missing, and that means that the connection between the missing
* device's DPM entry and the mapping table needs to be cleared. To do
* this, use the Physical ID of the old device still in the DPM entry
* to find its mapping table entry, then mark its DPM entry as BAD.
*/
if ((current_entry != MPS_DPM_BAD_IDX) &&
sc->dpm_entry_used[current_entry]) {
dpm_entry = (Mpi2DriverMap0Entry_t *) ((u8 *)sc->dpm_pg0 +
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
dpm_entry += current_entry;
physical_id = dpm_entry->PhysicalIdentifier.High;
physical_id = (physical_id << 32) |
dpm_entry->PhysicalIdentifier.Low;
map_idx = _mapping_get_mt_idx_from_id(sc, physical_id);
if (map_idx != MPS_MAPTABLE_BAD_IDX) {
mt_entry = &sc->mapping_table[map_idx];
mt_entry->dpm_entry_num = MPS_DPM_BAD_IDX;
}
}
return current_entry;
}
/**
* _mapping_update_ir_missing_cnt - Updates missing count for a volume
* @sc: per adapter object
* @map_idx: map table index of the volume
* @element: IR configuration change element
* @wwid: IR volume ID.
*
* Updates the missing count in the map table and in the DPM entry for a volume
*
* Returns nothing.
*/
static void
_mapping_update_ir_missing_cnt(struct mps_softc *sc, u32 map_idx,
Mpi2EventIrConfigElement_t *element, u64 wwid)
{
struct dev_mapping_table *mt_entry;
u8 missing_cnt, reason = element->ReasonCode, update_dpm = 1;
u16 dpm_idx;
Mpi2DriverMap0Entry_t *dpm_entry;
/*
* Depending on the reason code, update the missing count. Always set
* the init_complete flag when here, so just do it first. That flag is
* used for volumes to make sure that the DPM entry has been updated.
* When a volume is deleted, clear the map entry's IN_USE flag so that
* the entry can be used again if another volume is created. Also clear
* its dev_handle entry so that other functions can't find this volume
* by the handle, since it's not defined any longer.
*/
mt_entry = &sc->mapping_table[map_idx];
mt_entry->init_complete = 1;
if ((reason == MPI2_EVENT_IR_CHANGE_RC_ADDED) ||
(reason == MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED)) {
mt_entry->missing_count = 0;
} else if (reason == MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED) {
if (mt_entry->missing_count < MPS_MAX_MISSING_COUNT)
mt_entry->missing_count++;
mt_entry->device_info &= ~MPS_MAP_IN_USE;
mt_entry->dev_handle = 0;
}
/*
* If persistent mapping is enabled, update the DPM with the new missing
* count for the volume. If the DPM index is bad, get a free one. If
* it's bad for a volume that's being deleted do nothing because that
* volume doesn't have a DPM entry.
*/
if (!sc->is_dpm_enable)
return;
dpm_idx = mt_entry->dpm_entry_num;
if (dpm_idx == MPS_DPM_BAD_IDX) {
if (reason == MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED)
{
mps_dprint(sc, MPS_MAPPING, "%s: Volume being deleted "
"is not in DPM so DPM missing count will not be "
"updated.\n", __func__);
return;
}
}
if (dpm_idx == MPS_DPM_BAD_IDX)
dpm_idx = _mapping_get_free_dpm_idx(sc);
/*
* Got the DPM entry for the volume or found a free DPM entry if this is
* a new volume. Check if the current information is outdated.
*/
if (dpm_idx != MPS_DPM_BAD_IDX) {
dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *)sc->dpm_pg0 +
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
dpm_entry += dpm_idx;
missing_cnt = dpm_entry->MappingInformation &
MPI2_DRVMAP0_MAPINFO_MISSING_MASK;
if ((mt_entry->physical_id ==
le64toh(((u64)dpm_entry->PhysicalIdentifier.High << 32) |
(u64)dpm_entry->PhysicalIdentifier.Low)) && (missing_cnt ==
mt_entry->missing_count)) {
mps_dprint(sc, MPS_MAPPING, "%s: DPM entry for volume "
"with target ID %d does not require an update.\n",
__func__, mt_entry->id);
update_dpm = 0;
}
}
/*
* Update the volume's persistent info if it's new or the ID or missing
* count has changed. If a good DPM index has not been found by now,
* there is no space left in the DPM table.
*/
if ((dpm_idx != MPS_DPM_BAD_IDX) && update_dpm) {
mps_dprint(sc, MPS_MAPPING, "%s: Update DPM entry for volume "
"with target ID %d.\n", __func__, mt_entry->id);
mt_entry->dpm_entry_num = dpm_idx;
dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *)sc->dpm_pg0 +
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
dpm_entry += dpm_idx;
dpm_entry->PhysicalIdentifier.Low =
(0xFFFFFFFF & mt_entry->physical_id);
dpm_entry->PhysicalIdentifier.High =
(mt_entry->physical_id >> 32);
dpm_entry->DeviceIndex = map_idx;
dpm_entry->MappingInformation = mt_entry->missing_count;
dpm_entry->PhysicalBitsMapping = 0;
dpm_entry->Reserved1 = 0;
sc->dpm_flush_entry[dpm_idx] = 1;
sc->dpm_entry_used[dpm_idx] = 1;
} else if (dpm_idx == MPS_DPM_BAD_IDX) {
mps_dprint(sc, MPS_INFO | MPS_MAPPING, "%s: No space to add an "
"entry in the DPM table for volume with target ID %d.\n",
__func__, mt_entry->id);
}
}
/**
* _mapping_add_to_removal_table - add DPM index to the removal table
* @sc: per adapter object
* @dpm_idx: Index of DPM entry to remove
*
* Adds a DPM entry number to the removal table.
*
* Returns nothing.
*/
static void
_mapping_add_to_removal_table(struct mps_softc *sc, u16 dpm_idx)
{
struct map_removal_table *remove_entry;
u32 i;
/*
* This is only used to remove entries from the DPM in the controller.
* If DPM is not enabled, just return.
*/
if (!sc->is_dpm_enable)
return;
/*
* Find the first available removal_table entry and add the new entry
* there.
*/
remove_entry = sc->removal_table;
for (i = 0; i < sc->max_devices; i++, remove_entry++) {
if (remove_entry->dpm_entry_num != MPS_DPM_BAD_IDX)
continue;
mps_dprint(sc, MPS_MAPPING, "%s: Adding DPM entry %d to table "
"for removal.\n", __func__, dpm_idx);
remove_entry->dpm_entry_num = dpm_idx;
break;
}
}
/**
* _mapping_update_missing_count - Update missing count for a device
* @sc: per adapter object
* @topo_change: Topology change event entry
*
* Increment the missing count in the mapping table for a device that is not
* responding. If Persitent Mapping is used, increment the DPM entry as well.
* Currently, this function only increments the missing count if the device
* goes missing, so after initialization has completed. This means that the
* missing count can only go from 0 to 1 here. The missing count is incremented
* during initialization as well, so that's where a target's missing count can
* go past 1.
*
* Returns nothing.
*/
static void
_mapping_update_missing_count(struct mps_softc *sc,
struct _map_topology_change *topo_change)
{
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
u8 entry;
struct _map_phy_change *phy_change;
u32 map_idx;
struct dev_mapping_table *mt_entry;
Mpi2DriverMap0Entry_t *dpm_entry;
for (entry = 0; entry < topo_change->num_entries; entry++) {
phy_change = &topo_change->phy_details[entry];
if (!phy_change->dev_handle || (phy_change->reason !=
MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING))
continue;
map_idx = _mapping_get_mt_idx_from_handle(sc, phy_change->
dev_handle);
phy_change->is_processed = 1;
if (map_idx == MPS_MAPTABLE_BAD_IDX) {
mps_dprint(sc, MPS_INFO | MPS_MAPPING, "%s: device is "
"already removed from mapping table\n", __func__);
continue;
}
mt_entry = &sc->mapping_table[map_idx];
if (mt_entry->missing_count < MPS_MAX_MISSING_COUNT)
mt_entry->missing_count++;
/*
* When using Enc/Slot mapping, when a device is removed, it's
* mapping table information should be cleared. Otherwise, the
* target ID will be incorrect if this same device is re-added
* to a different slot.
*/
if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) {
_mapping_clear_map_entry(mt_entry);
}
/*
* When using device mapping, update the missing count in the
* DPM entry, but only if the missing count has changed.
*/
if (((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING) &&
sc->is_dpm_enable &&
mt_entry->dpm_entry_num != MPS_DPM_BAD_IDX) {
dpm_entry =
(Mpi2DriverMap0Entry_t *) ((u8 *)sc->dpm_pg0 +
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
dpm_entry += mt_entry->dpm_entry_num;
if (dpm_entry->MappingInformation !=
mt_entry->missing_count) {
dpm_entry->MappingInformation =
mt_entry->missing_count;
sc->dpm_flush_entry[mt_entry->dpm_entry_num] =
1;
}
}
}
}
/**
* _mapping_find_enc_map_space -find map table entries for enclosure
* @sc: per adapter object
* @et_entry: enclosure entry
*
* Search through the mapping table defragment it and provide contiguous
* space in map table for a particular enclosure entry
*
* Returns start index in map table or bad index.
*/
static u32
_mapping_find_enc_map_space(struct mps_softc *sc,
struct enc_mapping_table *et_entry)
{
u16 vol_mapping_flags;
u32 skip_count, end_of_table, map_idx, enc_idx;
u16 num_found;
u32 start_idx = MPS_MAPTABLE_BAD_IDX;
struct dev_mapping_table *mt_entry;
struct enc_mapping_table *enc_entry;
unsigned char done_flag = 0, found_space;
u16 max_num_phy_ids = le16toh(sc->ioc_pg8.MaxNumPhysicalMappedIDs);
skip_count = sc->num_rsvd_entries;
num_found = 0;
vol_mapping_flags = le16toh(sc->ioc_pg8.IRVolumeMappingFlags) &
MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
/*
* The end of the mapping table depends on where volumes are kept, if
* IR is enabled.
*/
if (!sc->ir_firmware)
end_of_table = sc->max_devices;
else if (vol_mapping_flags == MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING)
end_of_table = sc->max_devices;
else
end_of_table = sc->max_devices - sc->max_volumes;
/*
* The skip_count is the number of entries that are reserved at the
* beginning of the mapping table. But, it does not include the number
* of Physical IDs that are reserved for direct attached devices. Look
* through the mapping table after these reserved entries to see if
* the devices for this enclosure are already mapped. The PHY bit check
* is used to make sure that at least one PHY bit is common between the
* enclosure and the device that is already mapped.
*/
mps_dprint(sc, MPS_MAPPING, "%s: Looking for space in the mapping "
"table for added enclosure.\n", __func__);
for (map_idx = (max_num_phy_ids + skip_count);
map_idx < end_of_table; map_idx++) {
mt_entry = &sc->mapping_table[map_idx];
if ((et_entry->enclosure_id == mt_entry->physical_id) &&
(!mt_entry->phy_bits || (mt_entry->phy_bits &
et_entry->phy_bits))) {
num_found += 1;
if (num_found == et_entry->num_slots) {
start_idx = (map_idx - num_found) + 1;
mps_dprint(sc, MPS_MAPPING, "%s: Found space "
"in the mapping for enclosure at map index "
"%d.\n", __func__, start_idx);
return start_idx;
}
} else
num_found = 0;
}
/*
* If the enclosure's devices are not mapped already, look for
* contiguous entries in the mapping table that are not reserved. If
* enough entries are found, return the starting index for that space.
*/
num_found = 0;
for (map_idx = (max_num_phy_ids + skip_count);
map_idx < end_of_table; map_idx++) {
mt_entry = &sc->mapping_table[map_idx];
if (!(mt_entry->device_info & MPS_DEV_RESERVED)) {
num_found += 1;
if (num_found == et_entry->num_slots) {
start_idx = (map_idx - num_found) + 1;
mps_dprint(sc, MPS_MAPPING, "%s: Found space "
"in the mapping for enclosure at map index "
"%d.\n", __func__, start_idx);
return start_idx;
}
} else
num_found = 0;
}
/*
* If here, it means that not enough space in the mapping table was
* found to support this enclosure, so go through the enclosure table to
* see if any enclosure entries have a missing count. If so, get the
* enclosure with the highest missing count and check it to see if there
* is enough space for the new enclosure.
*/
while (!done_flag) {
enc_idx = _mapping_get_high_missing_et_idx(sc);
if (enc_idx == MPS_ENCTABLE_BAD_IDX) {
mps_dprint(sc, MPS_MAPPING, "%s: Not enough space was "
"found in the mapping for the added enclosure.\n",
__func__);
return MPS_MAPTABLE_BAD_IDX;
}
/*
* Found a missing enclosure. Set the skip_search flag so this
* enclosure is not checked again for a high missing count if
* the loop continues. This way, all missing enclosures can
* have their space added together to find enough space in the
* mapping table for the added enclosure. The space must be
* contiguous.
*/
mps_dprint(sc, MPS_MAPPING, "%s: Space from a missing "
"enclosure was found.\n", __func__);
enc_entry = &sc->enclosure_table[enc_idx];
enc_entry->skip_search = 1;
/*
* Unmark all of the missing enclosure's device's reserved
* space. These will be remarked as reserved if this missing
* enclosure's space is not used.
*/
mps_dprint(sc, MPS_MAPPING, "%s: Clear the reserved flag for "
"all of the map entries for the enclosure.\n", __func__);
mt_entry = &sc->mapping_table[enc_entry->start_index];
for (map_idx = enc_entry->start_index; map_idx <
(enc_entry->start_index + enc_entry->num_slots); map_idx++,
mt_entry++)
mt_entry->device_info &= ~MPS_DEV_RESERVED;
/*
* Now that space has been unreserved, check again to see if
* enough space is available for the new enclosure.
*/
mps_dprint(sc, MPS_MAPPING, "%s: Check if new mapping space is "
"enough for the new enclosure.\n", __func__);
found_space = 0;
num_found = 0;
for (map_idx = (max_num_phy_ids + skip_count);
map_idx < end_of_table; map_idx++) {
mt_entry = &sc->mapping_table[map_idx];
if (!(mt_entry->device_info & MPS_DEV_RESERVED)) {
num_found += 1;
if (num_found == et_entry->num_slots) {
start_idx = (map_idx - num_found) + 1;
found_space = 1;
break;
}
} else
num_found = 0;
}
if (!found_space)
continue;
/*
* If enough space was found, all of the missing enclosures that
* will be used for the new enclosure must be added to the
* removal table. Then all mappings for the enclosure's devices
* and for the enclosure itself need to be cleared. There may be
* more than one enclosure to add to the removal table and
* clear.
*/
mps_dprint(sc, MPS_MAPPING, "%s: Found space in the mapping "
"for enclosure at map index %d.\n", __func__, start_idx);
for (map_idx = start_idx; map_idx < (start_idx + num_found);
map_idx++) {
enc_entry = sc->enclosure_table;
for (enc_idx = 0; enc_idx < sc->num_enc_table_entries;
enc_idx++, enc_entry++) {
if (map_idx < enc_entry->start_index ||
map_idx > (enc_entry->start_index +
enc_entry->num_slots))
continue;
if (!enc_entry->removal_flag) {
mps_dprint(sc, MPS_MAPPING, "%s: "
"Enclosure %d will be removed from "
"the mapping table.\n", __func__,
enc_idx);
enc_entry->removal_flag = 1;
_mapping_add_to_removal_table(sc,
enc_entry->dpm_entry_num);
}
mt_entry = &sc->mapping_table[map_idx];
_mapping_clear_map_entry(mt_entry);
if (map_idx == (enc_entry->start_index +
enc_entry->num_slots - 1))
_mapping_clear_enc_entry(et_entry);
}
}
/*
* During the search for space for this enclosure, some entries
* in the mapping table may have been unreserved. Go back and
* change all of these to reserved again. Only the enclosures
* with the removal_flag set should be left as unreserved. The
* skip_search flag needs to be cleared as well so that the
* enclosure's space will be looked at the next time space is
* needed.
*/
enc_entry = sc->enclosure_table;
for (enc_idx = 0; enc_idx < sc->num_enc_table_entries;
enc_idx++, enc_entry++) {
if (!enc_entry->removal_flag) {
mps_dprint(sc, MPS_MAPPING, "%s: Reset the "
"reserved flag for all of the map entries "
"for enclosure %d.\n", __func__, enc_idx);
mt_entry = &sc->mapping_table[enc_entry->
start_index];
for (map_idx = enc_entry->start_index; map_idx <
(enc_entry->start_index +
enc_entry->num_slots); map_idx++,
mt_entry++)
mt_entry->device_info |=
MPS_DEV_RESERVED;
et_entry->skip_search = 0;
}
}
done_flag = 1;
}
return start_idx;
}
/**
* _mapping_get_dev_info -get information about newly added devices
* @sc: per adapter object
* @topo_change: Topology change event entry
*
* Search through the topology change event list and issues sas device pg0
* requests for the newly added device and reserved entries in tables
*
* Returns nothing
*/
static void
_mapping_get_dev_info(struct mps_softc *sc,
struct _map_topology_change *topo_change)
{
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
Mpi2ConfigReply_t mpi_reply;
Mpi2SasDevicePage0_t sas_device_pg0;
u8 entry, enc_idx, phy_idx;
u32 map_idx, index, device_info;
struct _map_phy_change *phy_change, *tmp_phy_change;
uint64_t sas_address;
struct enc_mapping_table *et_entry;
struct dev_mapping_table *mt_entry;
u8 add_code = MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED;
int rc = 1;
for (entry = 0; entry < topo_change->num_entries; entry++) {
phy_change = &topo_change->phy_details[entry];
if (phy_change->is_processed || !phy_change->dev_handle ||
phy_change->reason != MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED)
continue;
if (mps_config_get_sas_device_pg0(sc, &mpi_reply,
&sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
phy_change->dev_handle)) {
phy_change->is_processed = 1;
continue;
}
/*
* Always get SATA Identify information because this is used
* to determine if Start/Stop Unit should be sent to the drive
* when the system is shutdown.
*/
device_info = le32toh(sas_device_pg0.DeviceInfo);
sas_address = le32toh(sas_device_pg0.SASAddress.High);
sas_address = (sas_address << 32) |
le32toh(sas_device_pg0.SASAddress.Low);
if ((device_info & MPI2_SAS_DEVICE_INFO_END_DEVICE) &&
(device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE)) {
rc = mpssas_get_sas_address_for_sata_disk(sc,
&sas_address, phy_change->dev_handle, device_info,
&phy_change->is_SATA_SSD);
if (rc) {
mps_dprint(sc, MPS_ERROR, "%s: failed to get "
"disk type (SSD or HDD) and SAS Address "
"for SATA device with handle 0x%04x\n",
__func__, phy_change->dev_handle);
}
}
phy_change->physical_id = sas_address;
phy_change->slot = le16toh(sas_device_pg0.Slot);
phy_change->device_info = device_info;
/*
* When using Enc/Slot mapping, if this device is an enclosure
* make sure that all of its slots can fit into the mapping
* table.
*/
if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) {
/*
* The enclosure should already be in the enclosure
* table due to the Enclosure Add event. If not, just
* continue, nothing can be done.
*/
enc_idx = _mapping_get_enc_idx_from_handle(sc,
topo_change->enc_handle);
if (enc_idx == MPS_ENCTABLE_BAD_IDX) {
phy_change->is_processed = 1;
mps_dprint(sc, MPS_ERROR | MPS_MAPPING, "%s: "
"failed to add the device with handle "
"0x%04x because enclosure handle 0x%04x "
"is not in the mapping table\n", __func__,
phy_change->dev_handle,
topo_change->enc_handle);
continue;
}
if (!((phy_change->device_info &
MPI2_SAS_DEVICE_INFO_END_DEVICE) &&
(phy_change->device_info &
(MPI2_SAS_DEVICE_INFO_SSP_TARGET |
MPI2_SAS_DEVICE_INFO_STP_TARGET |
MPI2_SAS_DEVICE_INFO_SATA_DEVICE)))) {
phy_change->is_processed = 1;
continue;
}
et_entry = &sc->enclosure_table[enc_idx];
/*
* If the enclosure already has a start_index, it's been
* mapped, so go to the next Topo change.
*/
if (et_entry->start_index != MPS_MAPTABLE_BAD_IDX)
continue;
/*
* If the Expander Handle is 0, the devices are direct
* attached. In that case, the start_index must be just
* after the reserved entries. Otherwise, find space in
* the mapping table for the enclosure's devices.
*/
if (!topo_change->exp_handle) {
map_idx = sc->num_rsvd_entries;
et_entry->start_index = map_idx;
} else {
map_idx = _mapping_find_enc_map_space(sc,
et_entry);
et_entry->start_index = map_idx;
/*
* If space cannot be found to hold all of the
* enclosure's devices in the mapping table,
* there's no need to continue checking the
* other devices in this event. Set all of the
* phy_details for this event (if the change is
* for an add) as already processed because none
* of these devices can be added to the mapping
* table.
*/
if (et_entry->start_index ==
MPS_MAPTABLE_BAD_IDX) {
mps_dprint(sc, MPS_ERROR | MPS_MAPPING,
"%s: failed to add the enclosure "
"with ID 0x%016jx because there is "
"no free space available in the "
"mapping table for all of the "
"enclosure's devices.\n", __func__,
(uintmax_t)et_entry->enclosure_id);
phy_change->is_processed = 1;
for (phy_idx = 0; phy_idx <
topo_change->num_entries;
phy_idx++) {
tmp_phy_change =
&topo_change->phy_details
[phy_idx];
if (tmp_phy_change->reason ==
add_code)
tmp_phy_change->
is_processed = 1;
}
break;
}
}
/*
* Found space in the mapping table for this enclosure.
* Initialize each mapping table entry for the
* enclosure.
*/
mps_dprint(sc, MPS_MAPPING, "%s: Initialize %d map "
"entries for the enclosure, starting at map index "
" %d.\n", __func__, et_entry->num_slots, map_idx);
mt_entry = &sc->mapping_table[map_idx];
for (index = map_idx; index < (et_entry->num_slots
+ map_idx); index++, mt_entry++) {
mt_entry->device_info = MPS_DEV_RESERVED;
mt_entry->physical_id = et_entry->enclosure_id;
mt_entry->phy_bits = et_entry->phy_bits;
mt_entry->missing_count = 0;
}
}
}
}
/**
* _mapping_set_mid_to_eid -set map table data from enclosure table
* @sc: per adapter object
* @et_entry: enclosure entry
*
* Returns nothing
*/
static inline void
_mapping_set_mid_to_eid(struct mps_softc *sc,
struct enc_mapping_table *et_entry)
{
struct dev_mapping_table *mt_entry;
u16 slots = et_entry->num_slots, map_idx;
u32 start_idx = et_entry->start_index;
if (start_idx != MPS_MAPTABLE_BAD_IDX) {
mt_entry = &sc->mapping_table[start_idx];
for (map_idx = 0; map_idx < slots; map_idx++, mt_entry++)
mt_entry->physical_id = et_entry->enclosure_id;
}
}
/**
* _mapping_clear_removed_entries - mark the entries to be cleared
* @sc: per adapter object
*
* Search through the removal table and mark the entries which needs to be
* flushed to DPM and also updates the map table and enclosure table by
* clearing the corresponding entries.
*
* Returns nothing
*/
static void
_mapping_clear_removed_entries(struct mps_softc *sc)
{
u32 remove_idx;
struct map_removal_table *remove_entry;
Mpi2DriverMap0Entry_t *dpm_entry;
u8 done_flag = 0, num_entries, m, i;
struct enc_mapping_table *et_entry, *from, *to;
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
if (sc->is_dpm_enable) {
remove_entry = sc->removal_table;
for (remove_idx = 0; remove_idx < sc->max_devices;
remove_idx++, remove_entry++) {
if (remove_entry->dpm_entry_num != MPS_DPM_BAD_IDX) {
dpm_entry = (Mpi2DriverMap0Entry_t *)
((u8 *) sc->dpm_pg0 +
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
dpm_entry += remove_entry->dpm_entry_num;
dpm_entry->PhysicalIdentifier.Low = 0;
dpm_entry->PhysicalIdentifier.High = 0;
dpm_entry->DeviceIndex = 0;
dpm_entry->MappingInformation = 0;
dpm_entry->PhysicalBitsMapping = 0;
sc->dpm_flush_entry[remove_entry->
dpm_entry_num] = 1;
sc->dpm_entry_used[remove_entry->dpm_entry_num]
= 0;
remove_entry->dpm_entry_num = MPS_DPM_BAD_IDX;
}
}
}
/*
* When using Enc/Slot mapping, if a new enclosure was added and old
* enclosure space was needed, the enclosure table may now have gaps
* that need to be closed. All enclosure mappings need to be contiguous
* so that space can be reused correctly if available.
*/
if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) {
num_entries = sc->num_enc_table_entries;
while (!done_flag) {
done_flag = 1;
et_entry = sc->enclosure_table;
for (i = 0; i < num_entries; i++, et_entry++) {
if (!et_entry->enc_handle && et_entry->
init_complete) {
done_flag = 0;
if (i != (num_entries - 1)) {
from = &sc->enclosure_table
[i+1];
to = &sc->enclosure_table[i];
for (m = i; m < (num_entries -
1); m++, from++, to++) {
_mapping_set_mid_to_eid
(sc, to);
*to = *from;
}
_mapping_clear_enc_entry(to);
sc->num_enc_table_entries--;
num_entries =
sc->num_enc_table_entries;
} else {
_mapping_clear_enc_entry
(et_entry);
sc->num_enc_table_entries--;
num_entries =
sc->num_enc_table_entries;
}
}
}
}
}
}
/**
* _mapping_add_new_device -Add the new device into mapping table
* @sc: per adapter object
* @topo_change: Topology change event entry
*
* Search through the topology change event list and update map table,
* enclosure table and DPM pages for the newly added devices.
*
* Returns nothing
*/
static void
_mapping_add_new_device(struct mps_softc *sc,
struct _map_topology_change *topo_change)
{
u8 enc_idx, missing_cnt, is_removed = 0;
u16 dpm_idx;
u32 search_idx, map_idx;
u32 entry;
struct dev_mapping_table *mt_entry;
struct enc_mapping_table *et_entry;
struct _map_phy_change *phy_change;
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
Mpi2DriverMap0Entry_t *dpm_entry;
uint64_t temp64_var;
u8 map_shift = MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT;
u8 hdr_sz = sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER);
u16 max_num_phy_ids = le16toh(sc->ioc_pg8.MaxNumPhysicalMappedIDs);
for (entry = 0; entry < topo_change->num_entries; entry++) {
phy_change = &topo_change->phy_details[entry];
if (phy_change->is_processed)
continue;
if (phy_change->reason != MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED ||
!phy_change->dev_handle) {
phy_change->is_processed = 1;
continue;
}
if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) {
enc_idx = _mapping_get_enc_idx_from_handle
(sc, topo_change->enc_handle);
if (enc_idx == MPS_ENCTABLE_BAD_IDX) {
phy_change->is_processed = 1;
mps_dprint(sc, MPS_ERROR | MPS_MAPPING, "%s: "
"failed to add the device with handle "
"0x%04x because enclosure handle 0x%04x "
"is not in the mapping table\n", __func__,
phy_change->dev_handle,
topo_change->enc_handle);
continue;
}
/*
* If the enclosure's start_index is BAD here, it means
* that there is no room in the mapping table to cover
* all of the devices that could be in the enclosure.
* There's no reason to process any of the devices for
* this enclosure since they can't be mapped.
*/
et_entry = &sc->enclosure_table[enc_idx];
if (et_entry->start_index == MPS_MAPTABLE_BAD_IDX) {
phy_change->is_processed = 1;
mps_dprint(sc, MPS_ERROR | MPS_MAPPING, "%s: "
"failed to add the device with handle "
"0x%04x because there is no free space "
"available in the mapping table\n",
__func__, phy_change->dev_handle);
continue;
}
/*
* Add this device to the mapping table at the correct
* offset where space was found to map the enclosure.
* Then setup the DPM entry information if being used.
*/
map_idx = et_entry->start_index + phy_change->slot -
et_entry->start_slot;
mt_entry = &sc->mapping_table[map_idx];
mt_entry->physical_id = phy_change->physical_id;
mt_entry->id = map_idx;
mt_entry->dev_handle = phy_change->dev_handle;
mt_entry->missing_count = 0;
mt_entry->dpm_entry_num = et_entry->dpm_entry_num;
mt_entry->device_info = phy_change->device_info |
(MPS_DEV_RESERVED | MPS_MAP_IN_USE);
if (sc->is_dpm_enable) {
dpm_idx = et_entry->dpm_entry_num;
if (dpm_idx == MPS_DPM_BAD_IDX)
dpm_idx = _mapping_get_dpm_idx_from_id
(sc, et_entry->enclosure_id,
et_entry->phy_bits);
if (dpm_idx == MPS_DPM_BAD_IDX) {
dpm_idx = _mapping_get_free_dpm_idx(sc);
if (dpm_idx != MPS_DPM_BAD_IDX) {
dpm_entry =
(Mpi2DriverMap0Entry_t *)
((u8 *) sc->dpm_pg0 +
hdr_sz);
dpm_entry += dpm_idx;
dpm_entry->
PhysicalIdentifier.Low =
(0xFFFFFFFF &
et_entry->enclosure_id);
dpm_entry->
PhysicalIdentifier.High =
(et_entry->enclosure_id
>> 32);
dpm_entry->DeviceIndex =
(U16)et_entry->start_index;
dpm_entry->MappingInformation =
et_entry->num_slots;
dpm_entry->MappingInformation
<<= map_shift;
dpm_entry->PhysicalBitsMapping
= et_entry->phy_bits;
et_entry->dpm_entry_num =
dpm_idx;
sc->dpm_entry_used[dpm_idx] = 1;
sc->dpm_flush_entry[dpm_idx] =
1;
phy_change->is_processed = 1;
} else {
phy_change->is_processed = 1;
mps_dprint(sc, MPS_ERROR |
MPS_MAPPING, "%s: failed "
"to add the device with "
"handle 0x%04x to "
"persistent table because "
"there is no free space "
"available\n", __func__,
phy_change->dev_handle);
}
} else {
et_entry->dpm_entry_num = dpm_idx;
mt_entry->dpm_entry_num = dpm_idx;
}
}
et_entry->init_complete = 1;
} else if ((ioc_pg8_flags &
MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING) {
/*
* Get the mapping table index for this device. If it's
* not in the mapping table yet, find a free entry if
* one is available. If there are no free entries, look
* for the entry that has the highest missing count. If
* none of that works to find an entry in the mapping
* table, there is a problem. Log a message and just
* continue on.
*/
map_idx = _mapping_get_mt_idx_from_id
(sc, phy_change->physical_id);
if (map_idx == MPS_MAPTABLE_BAD_IDX) {
search_idx = sc->num_rsvd_entries;
if (topo_change->exp_handle)
search_idx += max_num_phy_ids;
map_idx = _mapping_get_free_mt_idx(sc,
search_idx);
}
/*
* If an entry will be used that has a missing device,
* clear its entry from the DPM in the controller.
*/
if (map_idx == MPS_MAPTABLE_BAD_IDX) {
map_idx = _mapping_get_high_missing_mt_idx(sc);
if (map_idx != MPS_MAPTABLE_BAD_IDX) {
mt_entry = &sc->mapping_table[map_idx];
_mapping_add_to_removal_table(sc,
mt_entry->dpm_entry_num);
is_removed = 1;
mt_entry->init_complete = 0;
}
}
if (map_idx != MPS_MAPTABLE_BAD_IDX) {
mt_entry = &sc->mapping_table[map_idx];
mt_entry->physical_id = phy_change->physical_id;
mt_entry->id = map_idx;
mt_entry->dev_handle = phy_change->dev_handle;
mt_entry->missing_count = 0;
mt_entry->device_info = phy_change->device_info
| (MPS_DEV_RESERVED | MPS_MAP_IN_USE);
} else {
phy_change->is_processed = 1;
mps_dprint(sc, MPS_ERROR | MPS_MAPPING, "%s: "
"failed to add the device with handle "
"0x%04x because there is no free space "
"available in the mapping table\n",
__func__, phy_change->dev_handle);
continue;
}
if (sc->is_dpm_enable) {
if (mt_entry->dpm_entry_num !=
MPS_DPM_BAD_IDX) {
dpm_idx = mt_entry->dpm_entry_num;
dpm_entry = (Mpi2DriverMap0Entry_t *)
((u8 *)sc->dpm_pg0 + hdr_sz);
dpm_entry += dpm_idx;
missing_cnt = dpm_entry->
MappingInformation &
MPI2_DRVMAP0_MAPINFO_MISSING_MASK;
temp64_var = dpm_entry->
PhysicalIdentifier.High;
temp64_var = (temp64_var << 32) |
dpm_entry->PhysicalIdentifier.Low;
/*
* If the Mapping Table's info is not
* the same as the DPM entry, clear the
* init_complete flag so that it's
* updated.
*/
if ((mt_entry->physical_id ==
temp64_var) && !missing_cnt)
mt_entry->init_complete = 1;
else
mt_entry->init_complete = 0;
} else {
dpm_idx = _mapping_get_free_dpm_idx(sc);
mt_entry->init_complete = 0;
}
if (dpm_idx != MPS_DPM_BAD_IDX &&
!mt_entry->init_complete) {
mt_entry->dpm_entry_num = dpm_idx;
dpm_entry = (Mpi2DriverMap0Entry_t *)
((u8 *)sc->dpm_pg0 + hdr_sz);
dpm_entry += dpm_idx;
dpm_entry->PhysicalIdentifier.Low =
(0xFFFFFFFF &
mt_entry->physical_id);
dpm_entry->PhysicalIdentifier.High =
(mt_entry->physical_id >> 32);
dpm_entry->DeviceIndex = (U16) map_idx;
dpm_entry->MappingInformation = 0;
dpm_entry->PhysicalBitsMapping = 0;
sc->dpm_entry_used[dpm_idx] = 1;
sc->dpm_flush_entry[dpm_idx] = 1;
phy_change->is_processed = 1;
} else if (dpm_idx == MPS_DPM_BAD_IDX) {
phy_change->is_processed = 1;
mps_dprint(sc, MPS_ERROR | MPS_MAPPING,
"%s: failed to add the device with "
"handle 0x%04x to persistent table "
"because there is no free space "
"available\n", __func__,
phy_change->dev_handle);
}
}
mt_entry->init_complete = 1;
}
phy_change->is_processed = 1;
}
if (is_removed)
_mapping_clear_removed_entries(sc);
}
/**
* _mapping_flush_dpm_pages -Flush the DPM pages to NVRAM
* @sc: per adapter object
*
* Returns nothing
*/
static void
_mapping_flush_dpm_pages(struct mps_softc *sc)
{
Mpi2DriverMap0Entry_t *dpm_entry;
Mpi2ConfigReply_t mpi_reply;
Mpi2DriverMappingPage0_t config_page;
u16 entry_num;
for (entry_num = 0; entry_num < sc->max_dpm_entries; entry_num++) {
if (!sc->dpm_flush_entry[entry_num])
continue;
memset(&config_page, 0, sizeof(Mpi2DriverMappingPage0_t));
memcpy(&config_page.Header, (u8 *)sc->dpm_pg0,
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
dpm_entry = (Mpi2DriverMap0Entry_t *) ((u8 *)sc->dpm_pg0 +
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
dpm_entry += entry_num;
dpm_entry->MappingInformation = htole16(dpm_entry->
MappingInformation);
dpm_entry->DeviceIndex = htole16(dpm_entry->DeviceIndex);
dpm_entry->PhysicalBitsMapping = htole32(dpm_entry->
PhysicalBitsMapping);
memcpy(&config_page.Entry, (u8 *)dpm_entry,
sizeof(Mpi2DriverMap0Entry_t));
/* TODO-How to handle failed writes? */
mps_dprint(sc, MPS_MAPPING, "%s: Flushing DPM entry %d.\n",
__func__, entry_num);
if (mps_config_set_dpm_pg0(sc, &mpi_reply, &config_page,
entry_num)) {
mps_dprint(sc, MPS_ERROR | MPS_MAPPING, "%s: Flush of "
"DPM entry %d for device failed\n", __func__,
entry_num);
} else
sc->dpm_flush_entry[entry_num] = 0;
dpm_entry->MappingInformation = le16toh(dpm_entry->
MappingInformation);
dpm_entry->DeviceIndex = le16toh(dpm_entry->DeviceIndex);
dpm_entry->PhysicalBitsMapping = le32toh(dpm_entry->
PhysicalBitsMapping);
}
}
/**
* _mapping_allocate_memory- allocates the memory required for mapping tables
* @sc: per adapter object
*
* Allocates the memory for all the tables required for host mapping
*
* Return 0 on success or non-zero on failure.
*/
int
mps_mapping_allocate_memory(struct mps_softc *sc)
{
uint32_t dpm_pg0_sz;
sc->mapping_table = malloc((sizeof(struct dev_mapping_table) *
sc->max_devices), M_MPT2, M_ZERO|M_NOWAIT);
if (!sc->mapping_table)
goto free_resources;
sc->removal_table = malloc((sizeof(struct map_removal_table) *
sc->max_devices), M_MPT2, M_ZERO|M_NOWAIT);
if (!sc->removal_table)
goto free_resources;
sc->enclosure_table = malloc((sizeof(struct enc_mapping_table) *
sc->max_enclosures), M_MPT2, M_ZERO|M_NOWAIT);
if (!sc->enclosure_table)
goto free_resources;
sc->dpm_entry_used = malloc((sizeof(u8) * sc->max_dpm_entries),
M_MPT2, M_ZERO|M_NOWAIT);
if (!sc->dpm_entry_used)
goto free_resources;
sc->dpm_flush_entry = malloc((sizeof(u8) * sc->max_dpm_entries),
M_MPT2, M_ZERO|M_NOWAIT);
if (!sc->dpm_flush_entry)
goto free_resources;
dpm_pg0_sz = sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER) +
(sc->max_dpm_entries * sizeof(MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY));
sc->dpm_pg0 = malloc(dpm_pg0_sz, M_MPT2, M_ZERO|M_NOWAIT);
if (!sc->dpm_pg0) {
printf("%s: memory alloc failed for dpm page; disabling dpm\n",
__func__);
sc->is_dpm_enable = 0;
}
return 0;
free_resources:
free(sc->mapping_table, M_MPT2);
free(sc->removal_table, M_MPT2);
free(sc->enclosure_table, M_MPT2);
free(sc->dpm_entry_used, M_MPT2);
free(sc->dpm_flush_entry, M_MPT2);
free(sc->dpm_pg0, M_MPT2);
printf("%s: device initialization failed due to failure in mapping "
"table memory allocation\n", __func__);
return -1;
}
/**
* mps_mapping_free_memory- frees the memory allocated for mapping tables
* @sc: per adapter object
*
* Returns nothing.
*/
void
mps_mapping_free_memory(struct mps_softc *sc)
{
free(sc->mapping_table, M_MPT2);
free(sc->removal_table, M_MPT2);
free(sc->enclosure_table, M_MPT2);
free(sc->dpm_entry_used, M_MPT2);
free(sc->dpm_flush_entry, M_MPT2);
free(sc->dpm_pg0, M_MPT2);
}
static void
_mapping_process_dpm_pg0(struct mps_softc *sc)
{
u8 missing_cnt, enc_idx;
u16 slot_id, entry_num, num_slots;
u32 map_idx, dev_idx, start_idx, end_idx;
struct dev_mapping_table *mt_entry;
Mpi2DriverMap0Entry_t *dpm_entry;
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
u16 max_num_phy_ids = le16toh(sc->ioc_pg8.MaxNumPhysicalMappedIDs);
struct enc_mapping_table *et_entry;
u64 physical_id;
u32 phy_bits = 0;
/*
* start_idx and end_idx are only used for IR.
*/
if (sc->ir_firmware)
_mapping_get_ir_maprange(sc, &start_idx, &end_idx);
/*
* Look through all of the DPM entries that were read from the
* controller and copy them over to the driver's internal table if they
* have a non-zero ID. At this point, any ID with a value of 0 would be
* invalid, so don't copy it.
*/
mps_dprint(sc, MPS_MAPPING, "%s: Start copy of %d DPM entries into the "
"mapping table.\n", __func__, sc->max_dpm_entries);
dpm_entry = (Mpi2DriverMap0Entry_t *) ((uint8_t *) sc->dpm_pg0 +
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
for (entry_num = 0; entry_num < sc->max_dpm_entries; entry_num++,
dpm_entry++) {
physical_id = dpm_entry->PhysicalIdentifier.High;
physical_id = (physical_id << 32) |
dpm_entry->PhysicalIdentifier.Low;
if (!physical_id) {
sc->dpm_entry_used[entry_num] = 0;
continue;
}
sc->dpm_entry_used[entry_num] = 1;
dpm_entry->MappingInformation = le16toh(dpm_entry->
MappingInformation);
missing_cnt = dpm_entry->MappingInformation &
MPI2_DRVMAP0_MAPINFO_MISSING_MASK;
dev_idx = le16toh(dpm_entry->DeviceIndex);
phy_bits = le32toh(dpm_entry->PhysicalBitsMapping);
/*
* Volumes are at special locations in the mapping table so
* account for that. Volume mapping table entries do not depend
* on the type of mapping, so continue the loop after adding
* volumes to the mapping table.
*/
if (sc->ir_firmware && (dev_idx >= start_idx) &&
(dev_idx <= end_idx)) {
mt_entry = &sc->mapping_table[dev_idx];
mt_entry->physical_id =
dpm_entry->PhysicalIdentifier.High;
mt_entry->physical_id = (mt_entry->physical_id << 32) |
dpm_entry->PhysicalIdentifier.Low;
mt_entry->id = dev_idx;
mt_entry->missing_count = missing_cnt;
mt_entry->dpm_entry_num = entry_num;
mt_entry->device_info = MPS_DEV_RESERVED;
continue;
}
if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) {
/*
* The dev_idx for an enclosure is the start index. If
* the start index is within the controller's default
* enclosure area, set the number of slots for this
* enclosure to the max allowed. Otherwise, it should be
* a normal enclosure and the number of slots is in the
* DPM entry's Mapping Information.
*/
if (dev_idx < (sc->num_rsvd_entries +
max_num_phy_ids)) {
slot_id = 0;
if (ioc_pg8_flags &
MPI2_IOCPAGE8_FLAGS_DA_START_SLOT_1)
slot_id = 1;
num_slots = max_num_phy_ids;
} else {
slot_id = 0;
num_slots = dpm_entry->MappingInformation &
MPI2_DRVMAP0_MAPINFO_SLOT_MASK;
num_slots >>= MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT;
}
enc_idx = sc->num_enc_table_entries;
if (enc_idx >= sc->max_enclosures) {
mps_dprint(sc, MPS_ERROR | MPS_MAPPING, "%s: "
"Number of enclosure entries in DPM exceed "
"the max allowed of %d.\n", __func__,
sc->max_enclosures);
break;
}
sc->num_enc_table_entries++;
et_entry = &sc->enclosure_table[enc_idx];
physical_id = dpm_entry->PhysicalIdentifier.High;
et_entry->enclosure_id = (physical_id << 32) |
dpm_entry->PhysicalIdentifier.Low;
et_entry->start_index = dev_idx;
et_entry->dpm_entry_num = entry_num;
et_entry->num_slots = num_slots;
et_entry->start_slot = slot_id;
et_entry->missing_count = missing_cnt;
et_entry->phy_bits = phy_bits;
/*
* Initialize all entries for this enclosure in the
* mapping table and mark them as reserved. The actual
* devices have not been processed yet but when they are
* they will use these entries. If an entry is found
* that already has a valid DPM index, the mapping table
* is corrupt. This can happen if the mapping type is
* changed without clearing all of the DPM entries in
* the controller.
*/
mt_entry = &sc->mapping_table[dev_idx];
for (map_idx = dev_idx; map_idx < (dev_idx + num_slots);
map_idx++, mt_entry++) {
if (mt_entry->dpm_entry_num !=
MPS_DPM_BAD_IDX) {
mps_dprint(sc, MPS_ERROR | MPS_MAPPING,
"%s: Conflict in mapping table for "
"enclosure %d device %d\n",
__func__, enc_idx, map_idx);
break;
}
physical_id =
dpm_entry->PhysicalIdentifier.High;
mt_entry->physical_id = (physical_id << 32) |
dpm_entry->PhysicalIdentifier.Low;
mt_entry->phy_bits = phy_bits;
mt_entry->id = dev_idx;
mt_entry->dpm_entry_num = entry_num;
mt_entry->missing_count = missing_cnt;
mt_entry->device_info = MPS_DEV_RESERVED;
}
} else if ((ioc_pg8_flags &
MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING) {
/*
* Device mapping, so simply copy the DPM entries to the
* mapping table, but check for a corrupt mapping table
* (as described above in Enc/Slot mapping).
*/
map_idx = dev_idx;
mt_entry = &sc->mapping_table[map_idx];
if (mt_entry->dpm_entry_num != MPS_DPM_BAD_IDX) {
mps_dprint(sc, MPS_ERROR | MPS_MAPPING, "%s: "
"Conflict in mapping table for device %d\n",
__func__, map_idx);
break;
}
physical_id = dpm_entry->PhysicalIdentifier.High;
mt_entry->physical_id = (physical_id << 32) |
dpm_entry->PhysicalIdentifier.Low;
mt_entry->phy_bits = phy_bits;
mt_entry->id = dev_idx;
mt_entry->missing_count = missing_cnt;
mt_entry->dpm_entry_num = entry_num;
mt_entry->device_info = MPS_DEV_RESERVED;
}
} /*close the loop for DPM table */
}
/*
* mps_mapping_check_devices - start of the day check for device availabilty
* @sc: per adapter object
*
* Returns nothing.
*/
void
mps_mapping_check_devices(void *data)
{
u32 i;
struct dev_mapping_table *mt_entry;
struct mps_softc *sc = (struct mps_softc *)data;
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
struct enc_mapping_table *et_entry;
u32 start_idx = 0, end_idx = 0;
u8 stop_device_checks = 0;
MPS_FUNCTRACE(sc);
/*
* Clear this flag so that this function is never called again except
* within this function if the check needs to be done again. The
* purpose is to check for missing devices that are currently in the
* mapping table so do this only at driver init after discovery.
*/
sc->track_mapping_events = 0;
/*
* callout synchronization
* This is used to prevent race conditions for the callout.
*/
mps_dprint(sc, MPS_MAPPING, "%s: Start check for missing devices.\n",
__func__);
mtx_assert(&sc->mps_mtx, MA_OWNED);
if ((callout_pending(&sc->device_check_callout)) ||
(!callout_active(&sc->device_check_callout))) {
mps_dprint(sc, MPS_MAPPING, "%s: Device Check Callout is "
"already pending or not active.\n", __func__);
return;
}
callout_deactivate(&sc->device_check_callout);
/*
* Use callout to check if any devices in the mapping table have been
* processed yet. If ALL devices are marked as not init_complete, no
* devices have been processed and mapped. Until devices are mapped
* there's no reason to mark them as missing. Continue resetting this
* callout until devices have been mapped.
*/
if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) {
et_entry = sc->enclosure_table;
for (i = 0; i < sc->num_enc_table_entries; i++, et_entry++) {
if (et_entry->init_complete) {
stop_device_checks = 1;
break;
}
}
} else if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING) {
mt_entry = sc->mapping_table;
for (i = 0; i < sc->max_devices; i++, mt_entry++) {
if (mt_entry->init_complete) {
stop_device_checks = 1;
break;
}
}
}
/*
* Setup another callout check after a delay. Keep doing this until
* devices are mapped.
*/
if (!stop_device_checks) {
mps_dprint(sc, MPS_MAPPING, "%s: No devices have been mapped. "
"Reset callout to check again after a %d second delay.\n",
__func__, MPS_MISSING_CHECK_DELAY);
callout_reset(&sc->device_check_callout,
MPS_MISSING_CHECK_DELAY * hz, mps_mapping_check_devices,
sc);
return;
}
mps_dprint(sc, MPS_MAPPING, "%s: Device check complete.\n", __func__);
/*
* Depending on the mapping type, check if devices have been processed
* and update their missing counts if not processed.
*/
if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) {
et_entry = sc->enclosure_table;
for (i = 0; i < sc->num_enc_table_entries; i++, et_entry++) {
if (!et_entry->init_complete) {
if (et_entry->missing_count <
MPS_MAX_MISSING_COUNT) {
mps_dprint(sc, MPS_MAPPING, "%s: "
"Enclosure %d is missing from the "
"topology. Update its missing "
"count.\n", __func__, i);
et_entry->missing_count++;
if (et_entry->dpm_entry_num !=
MPS_DPM_BAD_IDX) {
_mapping_commit_enc_entry(sc,
et_entry);
}
}
et_entry->init_complete = 1;
}
}
if (!sc->ir_firmware)
return;
_mapping_get_ir_maprange(sc, &start_idx, &end_idx);
mt_entry = &sc->mapping_table[start_idx];
} else if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING) {
start_idx = 0;
end_idx = sc->max_devices - 1;
mt_entry = sc->mapping_table;
}
/*
* The start and end indices have been set above according to the
* mapping type. Go through these mappings and update any entries that
* do not have the init_complete flag set, which means they are missing.
*/
if (end_idx == 0)
return;
for (i = start_idx; i < (end_idx + 1); i++, mt_entry++) {
if (mt_entry->device_info & MPS_DEV_RESERVED
&& !mt_entry->physical_id)
mt_entry->init_complete = 1;
else if (mt_entry->device_info & MPS_DEV_RESERVED) {
if (!mt_entry->init_complete) {
mps_dprint(sc, MPS_MAPPING, "%s: Device in "
"mapping table at index %d is missing from "
"topology. Update its missing count.\n",
__func__, i);
if (mt_entry->missing_count <
MPS_MAX_MISSING_COUNT) {
mt_entry->missing_count++;
if (mt_entry->dpm_entry_num !=
MPS_DPM_BAD_IDX) {
_mapping_commit_map_entry(sc,
mt_entry);
}
}
mt_entry->init_complete = 1;
}
}
}
}
/**
* mps_mapping_initialize - initialize mapping tables
* @sc: per adapter object
*
* Read controller persitant mapping tables into internal data area.
*
* Return 0 for success or non-zero for failure.
*/
int
mps_mapping_initialize(struct mps_softc *sc)
{
uint16_t volume_mapping_flags, dpm_pg0_sz;
uint32_t i;
Mpi2ConfigReply_t mpi_reply;
int error;
uint8_t retry_count;
uint16_t ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
/* The additional 1 accounts for the virtual enclosure
* created for the controller
*/
sc->max_enclosures = sc->facts->MaxEnclosures + 1;
sc->max_expanders = sc->facts->MaxSasExpanders;
sc->max_volumes = sc->facts->MaxVolumes;
sc->max_devices = sc->facts->MaxTargets + sc->max_volumes;
sc->pending_map_events = 0;
sc->num_enc_table_entries = 0;
sc->num_rsvd_entries = 0;
sc->max_dpm_entries = sc->ioc_pg8.MaxPersistentEntries;
sc->is_dpm_enable = (sc->max_dpm_entries) ? 1 : 0;
sc->track_mapping_events = 0;
mps_dprint(sc, MPS_MAPPING, "%s: Mapping table has a max of %d entries "
"and DPM has a max of %d entries.\n", __func__, sc->max_devices,
sc->max_dpm_entries);
if (ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_DISABLE_PERSISTENT_MAPPING)
sc->is_dpm_enable = 0;
if (ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0)
sc->num_rsvd_entries = 1;
volume_mapping_flags = sc->ioc_pg8.IRVolumeMappingFlags &
MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
if (sc->ir_firmware && (volume_mapping_flags ==
MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING))
sc->num_rsvd_entries += sc->max_volumes;
error = mps_mapping_allocate_memory(sc);
if (error)
return (error);
for (i = 0; i < sc->max_devices; i++)
_mapping_clear_map_entry(sc->mapping_table + i);
for (i = 0; i < sc->max_enclosures; i++)
_mapping_clear_enc_entry(sc->enclosure_table + i);
for (i = 0; i < sc->max_devices; i++) {
sc->removal_table[i].dev_handle = 0;
sc->removal_table[i].dpm_entry_num = MPS_DPM_BAD_IDX;
}
memset(sc->dpm_entry_used, 0, sc->max_dpm_entries);
memset(sc->dpm_flush_entry, 0, sc->max_dpm_entries);
if (sc->is_dpm_enable) {
dpm_pg0_sz = sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER) +
(sc->max_dpm_entries *
sizeof(MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY));
retry_count = 0;
retry_read_dpm:
if (mps_config_get_dpm_pg0(sc, &mpi_reply, sc->dpm_pg0,
dpm_pg0_sz)) {
mps_dprint(sc, MPS_ERROR | MPS_MAPPING, "%s: DPM page "
"read failed.\n", __func__);
if (retry_count < 3) {
retry_count++;
goto retry_read_dpm;
}
sc->is_dpm_enable = 0;
}
}
if (sc->is_dpm_enable)
_mapping_process_dpm_pg0(sc);
else {
mps_dprint(sc, MPS_MAPPING, "%s: DPM processing is disabled. "
"Device mappings will not persist across reboots or "
"resets.\n", __func__);
}
sc->track_mapping_events = 1;
return 0;
}
/**
* mps_mapping_exit - clear mapping table and associated memory
* @sc: per adapter object
*
* Returns nothing.
*/
void
mps_mapping_exit(struct mps_softc *sc)
{
_mapping_flush_dpm_pages(sc);
mps_mapping_free_memory(sc);
}
/**
* mps_mapping_get_tid - return the target id for sas device and handle
* @sc: per adapter object
* @sas_address: sas address of the device
* @handle: device handle
*
* Returns valid target ID on success or BAD_ID.
*/
unsigned int
mps_mapping_get_tid(struct mps_softc *sc, uint64_t sas_address, u16 handle)
{
u32 map_idx;
struct dev_mapping_table *mt_entry;
for (map_idx = 0; map_idx < sc->max_devices; map_idx++) {
mt_entry = &sc->mapping_table[map_idx];
if (mt_entry->dev_handle == handle && mt_entry->physical_id ==
sas_address)
return mt_entry->id;
}
return MPS_MAP_BAD_ID;
}
/**
* mps_mapping_get_tid_from_handle - find a target id in mapping table using
* only the dev handle. This is just a wrapper function for the local function
* _mapping_get_mt_idx_from_handle.
* @sc: per adapter object
* @handle: device handle
*
* Returns valid target ID on success or BAD_ID.
*/
unsigned int
mps_mapping_get_tid_from_handle(struct mps_softc *sc, u16 handle)
{
return (_mapping_get_mt_idx_from_handle(sc, handle));
}
/**
* mps_mapping_get_raid_tid - return the target id for raid device
* @sc: per adapter object
* @wwid: world wide identifier for raid volume
* @volHandle: volume device handle
*
* Returns valid target ID on success or BAD_ID.
*/
unsigned int
mps_mapping_get_raid_tid(struct mps_softc *sc, u64 wwid, u16 volHandle)
{
u32 start_idx, end_idx, map_idx;
struct dev_mapping_table *mt_entry;
_mapping_get_ir_maprange(sc, &start_idx, &end_idx);
mt_entry = &sc->mapping_table[start_idx];
for (map_idx = start_idx; map_idx <= end_idx; map_idx++, mt_entry++) {
if (mt_entry->dev_handle == volHandle &&
mt_entry->physical_id == wwid)
return mt_entry->id;
}
return MPS_MAP_BAD_ID;
}
/**
* mps_mapping_get_raid_tid_from_handle - find raid device in mapping table
* using only the volume dev handle. This is just a wrapper function for the
* local function _mapping_get_ir_mt_idx_from_handle.
* @sc: per adapter object
* @volHandle: volume device handle
*
* Returns valid target ID on success or BAD_ID.
*/
unsigned int
mps_mapping_get_raid_tid_from_handle(struct mps_softc *sc, u16 volHandle)
{
return (_mapping_get_ir_mt_idx_from_handle(sc, volHandle));
}
/**
* mps_mapping_enclosure_dev_status_change_event - handle enclosure events
* @sc: per adapter object
* @event_data: event data payload
*
* Return nothing.
*/
void
mps_mapping_enclosure_dev_status_change_event(struct mps_softc *sc,
Mpi2EventDataSasEnclDevStatusChange_t *event_data)
{
u8 enc_idx, missing_count;
struct enc_mapping_table *et_entry;
Mpi2DriverMap0Entry_t *dpm_entry;
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
u8 map_shift = MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT;
u8 update_phy_bits = 0;
u32 saved_phy_bits;
uint64_t temp64_var;
if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) !=
MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING)
goto out;
dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *)sc->dpm_pg0 +
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
if (event_data->ReasonCode == MPI2_EVENT_SAS_ENCL_RC_ADDED) {
if (!event_data->NumSlots) {
mps_dprint(sc, MPS_ERROR | MPS_MAPPING, "%s: Enclosure "
"with handle = 0x%x reported 0 slots.\n", __func__,
le16toh(event_data->EnclosureHandle));
goto out;
}
temp64_var = event_data->EnclosureLogicalID.High;
temp64_var = (temp64_var << 32) |
event_data->EnclosureLogicalID.Low;
enc_idx = _mapping_get_enc_idx_from_id(sc, temp64_var,
event_data->PhyBits);
/*
* If the Added enclosure is already in the Enclosure Table,
* make sure that all the the enclosure info is up to date. If
* the enclosure was missing and has just been added back, or if
* the enclosure's Phy Bits have changed, clear the missing
* count and update the Phy Bits in the mapping table and in the
* DPM, if it's being used.
*/
if (enc_idx != MPS_ENCTABLE_BAD_IDX) {
et_entry = &sc->enclosure_table[enc_idx];
if (et_entry->init_complete &&
!et_entry->missing_count) {
mps_dprint(sc, MPS_MAPPING, "%s: Enclosure %d "
"is already present with handle = 0x%x\n",
__func__, enc_idx, et_entry->enc_handle);
goto out;
}
et_entry->enc_handle = le16toh(event_data->
EnclosureHandle);
et_entry->start_slot = le16toh(event_data->StartSlot);
saved_phy_bits = et_entry->phy_bits;
et_entry->phy_bits |= le32toh(event_data->PhyBits);
if (saved_phy_bits != et_entry->phy_bits)
update_phy_bits = 1;
if (et_entry->missing_count || update_phy_bits) {
et_entry->missing_count = 0;
if (sc->is_dpm_enable &&
et_entry->dpm_entry_num !=
MPS_DPM_BAD_IDX) {
dpm_entry += et_entry->dpm_entry_num;
missing_count =
(u8)(dpm_entry->MappingInformation &
MPI2_DRVMAP0_MAPINFO_MISSING_MASK);
if (missing_count || update_phy_bits) {
dpm_entry->MappingInformation
= et_entry->num_slots;
dpm_entry->MappingInformation
<<= map_shift;
dpm_entry->PhysicalBitsMapping
= et_entry->phy_bits;
sc->dpm_flush_entry[et_entry->
dpm_entry_num] = 1;
}
}
}
} else {
/*
* This is a new enclosure that is being added.
* Initialize the Enclosure Table entry. It will be
* finalized when a device is added for the enclosure
* and the enclosure has enough space in the Mapping
* Table to map its devices.
*/
if (sc->num_enc_table_entries < sc->max_enclosures) {
enc_idx = sc->num_enc_table_entries;
sc->num_enc_table_entries++;
} else {
enc_idx = _mapping_get_high_missing_et_idx(sc);
if (enc_idx != MPS_ENCTABLE_BAD_IDX) {
et_entry = &sc->enclosure_table[enc_idx];
_mapping_add_to_removal_table(sc,
et_entry->dpm_entry_num);
_mapping_clear_enc_entry(et_entry);
}
}
if (enc_idx == MPS_ENCTABLE_BAD_IDX) {
mps_dprint(sc, MPS_ERROR | MPS_MAPPING, "%s: "
"Enclosure cannot be added to mapping "
"table because it's full.\n", __func__);
goto out;
}
et_entry = &sc->enclosure_table[enc_idx];
et_entry->enc_handle = le16toh(event_data->
EnclosureHandle);
et_entry->enclosure_id = le64toh(event_data->
EnclosureLogicalID.High);
et_entry->enclosure_id =
((et_entry->enclosure_id << 32) |
le64toh(event_data->EnclosureLogicalID.Low));
et_entry->start_index = MPS_MAPTABLE_BAD_IDX;
et_entry->dpm_entry_num = MPS_DPM_BAD_IDX;
et_entry->num_slots = le16toh(event_data->NumSlots);
et_entry->start_slot = le16toh(event_data->StartSlot);
et_entry->phy_bits = le32toh(event_data->PhyBits);
}
et_entry->init_complete = 1;
} else if (event_data->ReasonCode ==
MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING) {
/*
* An enclosure was removed. Update its missing count and then
* update the DPM entry with the new missing count for the
* enclosure.
*/
enc_idx = _mapping_get_enc_idx_from_handle(sc,
le16toh(event_data->EnclosureHandle));
if (enc_idx == MPS_ENCTABLE_BAD_IDX) {
mps_dprint(sc, MPS_ERROR | MPS_MAPPING, "%s: Cannot "
"unmap enclosure with handle 0x%04x because it "
"has already been deleted.\n", __func__,
le16toh(event_data->EnclosureHandle));
goto out;
}
et_entry = &sc->enclosure_table[enc_idx];
if (et_entry->missing_count < MPS_MAX_MISSING_COUNT)
et_entry->missing_count++;
if (sc->is_dpm_enable &&
et_entry->dpm_entry_num != MPS_DPM_BAD_IDX) {
dpm_entry += et_entry->dpm_entry_num;
dpm_entry->MappingInformation = et_entry->num_slots;
dpm_entry->MappingInformation <<= map_shift;
dpm_entry->MappingInformation |=
et_entry->missing_count;
sc->dpm_flush_entry[et_entry->dpm_entry_num] = 1;
}
et_entry->init_complete = 1;
}
out:
_mapping_flush_dpm_pages(sc);
if (sc->pending_map_events)
sc->pending_map_events--;
}
/**
* mps_mapping_topology_change_event - handle topology change events
* @sc: per adapter object
* @event_data: event data payload
*
* Returns nothing.
*/
void
mps_mapping_topology_change_event(struct mps_softc *sc,
Mpi2EventDataSasTopologyChangeList_t *event_data)
{
struct _map_topology_change topo_change;
struct _map_phy_change *phy_change;
Mpi2EventSasTopoPhyEntry_t *event_phy_change;
u8 i, num_entries;
topo_change.enc_handle = le16toh(event_data->EnclosureHandle);
topo_change.exp_handle = le16toh(event_data->ExpanderDevHandle);
num_entries = event_data->NumEntries;
topo_change.num_entries = num_entries;
topo_change.start_phy_num = event_data->StartPhyNum;
topo_change.num_phys = event_data->NumPhys;
topo_change.exp_status = event_data->ExpStatus;
event_phy_change = event_data->PHY;
topo_change.phy_details = NULL;
if (!num_entries)
goto out;
phy_change = malloc(sizeof(struct _map_phy_change) * num_entries,
M_MPT2, M_NOWAIT|M_ZERO);
topo_change.phy_details = phy_change;
if (!phy_change)
goto out;
for (i = 0; i < num_entries; i++, event_phy_change++, phy_change++) {
phy_change->dev_handle = le16toh(event_phy_change->
AttachedDevHandle);
phy_change->reason = event_phy_change->PhyStatus &
MPI2_EVENT_SAS_TOPO_RC_MASK;
}
_mapping_update_missing_count(sc, &topo_change);
_mapping_get_dev_info(sc, &topo_change);
_mapping_clear_removed_entries(sc);
_mapping_add_new_device(sc, &topo_change);
out:
free(topo_change.phy_details, M_MPT2);
_mapping_flush_dpm_pages(sc);
if (sc->pending_map_events)
sc->pending_map_events--;
}
/**
* mps_mapping_ir_config_change_event - handle IR config change list events
* @sc: per adapter object
* @event_data: event data payload
*
* Returns nothing.
*/
void
mps_mapping_ir_config_change_event(struct mps_softc *sc,
Mpi2EventDataIrConfigChangeList_t *event_data)
{
Mpi2EventIrConfigElement_t *element;
int i;
u64 *wwid_table;
u32 map_idx, flags;
struct dev_mapping_table *mt_entry;
u16 element_flags;
wwid_table = malloc(sizeof(u64) * event_data->NumElements, M_MPT2,
M_NOWAIT | M_ZERO);
if (!wwid_table)
goto out;
element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
flags = le32toh(event_data->Flags);
/*
* For volume changes, get the WWID for the volume and put it in a
* table to be used in the processing of the IR change event.
*/
for (i = 0; i < event_data->NumElements; i++, element++) {
element_flags = le16toh(element->ElementFlags);
if ((element->ReasonCode != MPI2_EVENT_IR_CHANGE_RC_ADDED) &&
(element->ReasonCode != MPI2_EVENT_IR_CHANGE_RC_REMOVED) &&
(element->ReasonCode != MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE)
&& (element->ReasonCode !=
MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED))
continue;
if ((element_flags &
MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK) ==
MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT) {
mps_config_get_volume_wwid(sc,
le16toh(element->VolDevHandle), &wwid_table[i]);
}
}
/*
* Check the ReasonCode for each element in the IR event and Add/Remove
* Volumes or Physical Disks of Volumes to/from the mapping table. Use
* the WWIDs gotten above in wwid_table.
*/
if (flags == MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG)
goto out;
else {
element = (Mpi2EventIrConfigElement_t *)&event_data->
ConfigElement[0];
for (i = 0; i < event_data->NumElements; i++, element++) {
if (element->ReasonCode ==
MPI2_EVENT_IR_CHANGE_RC_ADDED ||
element->ReasonCode ==
MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED) {
map_idx = _mapping_get_ir_mt_idx_from_wwid
(sc, wwid_table[i]);
if (map_idx != MPS_MAPTABLE_BAD_IDX) {
/*
* The volume is already in the mapping
* table. Just update it's info.
*/
mt_entry = &sc->mapping_table[map_idx];
mt_entry->id = map_idx;
mt_entry->dev_handle = le16toh
(element->VolDevHandle);
mt_entry->device_info =
MPS_DEV_RESERVED | MPS_MAP_IN_USE;
_mapping_update_ir_missing_cnt(sc,
map_idx, element, wwid_table[i]);
continue;
}
/*
* Volume is not in mapping table yet. Find a
* free entry in the mapping table at the
* volume mapping locations. If no entries are
* available, this is an error because it means
* there are more volumes than can be mapped
* and that should never happen for volumes.
*/
map_idx = _mapping_get_free_ir_mt_idx(sc);
if (map_idx == MPS_MAPTABLE_BAD_IDX)
{
mps_dprint(sc, MPS_ERROR | MPS_MAPPING,
"%s: failed to add the volume with "
"handle 0x%04x because there is no "
"free space available in the "
"mapping table\n", __func__,
le16toh(element->VolDevHandle));
continue;
}
mt_entry = &sc->mapping_table[map_idx];
mt_entry->physical_id = wwid_table[i];
mt_entry->id = map_idx;
mt_entry->dev_handle = le16toh(element->
VolDevHandle);
mt_entry->device_info = MPS_DEV_RESERVED |
MPS_MAP_IN_USE;
_mapping_update_ir_missing_cnt(sc, map_idx,
element, wwid_table[i]);
} else if (element->ReasonCode ==
MPI2_EVENT_IR_CHANGE_RC_REMOVED) {
map_idx = _mapping_get_ir_mt_idx_from_wwid(sc,
wwid_table[i]);
if (map_idx == MPS_MAPTABLE_BAD_IDX) {
mps_dprint(sc, MPS_MAPPING,"%s: Failed "
"to remove a volume because it has "
"already been removed.\n",
__func__);
continue;
}
_mapping_update_ir_missing_cnt(sc, map_idx,
element, wwid_table[i]);
} else if (element->ReasonCode ==
MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED) {
map_idx = _mapping_get_mt_idx_from_handle(sc,
le16toh(element->VolDevHandle));
if (map_idx == MPS_MAPTABLE_BAD_IDX) {
mps_dprint(sc, MPS_MAPPING,"%s: Failed "
"to remove volume with handle "
"0x%04x because it has already "
"been removed.\n", __func__,
le16toh(element->VolDevHandle));
continue;
}
mt_entry = &sc->mapping_table[map_idx];
_mapping_update_ir_missing_cnt(sc, map_idx,
element, mt_entry->physical_id);
}
}
}
out:
_mapping_flush_dpm_pages(sc);
free(wwid_table, M_MPT2);
if (sc->pending_map_events)
sc->pending_map_events--;
}
int
mps_mapping_dump(SYSCTL_HANDLER_ARGS)
{
struct mps_softc *sc;
struct dev_mapping_table *mt_entry;
struct sbuf sbuf;
int i, error;
sc = (struct mps_softc *)arg1;
error = sysctl_wire_old_buffer(req, 0);
if (error != 0)
return (error);
sbuf_new_for_sysctl(&sbuf, NULL, 128, req);
sbuf_printf(&sbuf, "\nindex physical_id handle id\n");
for (i = 0; i < sc->max_devices; i++) {
mt_entry = &sc->mapping_table[i];
if (mt_entry->physical_id == 0)
continue;
sbuf_printf(&sbuf, "%4d %jx %04x %hd\n",
i, mt_entry->physical_id, mt_entry->dev_handle,
mt_entry->id);
}
error = sbuf_finish(&sbuf);
sbuf_delete(&sbuf);
return (error);
}
int
mps_mapping_encl_dump(SYSCTL_HANDLER_ARGS)
{
struct mps_softc *sc;
struct enc_mapping_table *enc_entry;
struct sbuf sbuf;
int i, error;
sc = (struct mps_softc *)arg1;
error = sysctl_wire_old_buffer(req, 0);
if (error != 0)
return (error);
sbuf_new_for_sysctl(&sbuf, NULL, 128, req);
sbuf_printf(&sbuf, "\nindex enclosure_id handle map_index\n");
for (i = 0; i < sc->max_enclosures; i++) {
enc_entry = &sc->enclosure_table[i];
if (enc_entry->enclosure_id == 0)
continue;
sbuf_printf(&sbuf, "%4d %jx %04x %d\n",
i, enc_entry->enclosure_id, enc_entry->enc_handle,
enc_entry->start_index);
}
error = sbuf_finish(&sbuf);
sbuf_delete(&sbuf);
return (error);
}
Reference in New Issue View Git Blame Copy Permalink