acd43345e5
Restructure the way ATA/ATAPI commands are processed, use a common ata_request structure for both. This centralises the way requests are handled so locking is much easier to handle. The driver is now layered much more cleanly to seperate the lowlevel HW access so it can be tailored to specific controllers without touching the upper layers. This is needed to support some of the newer semi-intelligent ATA controllers showing up. The top level drivers (disk, ATAPI devices) are more or less still the same with just corrections to use the new interface. Pull ATA out from under Gaint now that locking can be done in a sane way. Add support for a the National Geode SC1100. Thanks to Soekris engineering for sponsoring a Soekris 4801 to make this support. Fixed alot of small bugs in the chipset code for various chips now we are around in that corner anyways.
128 lines
6.5 KiB
C
128 lines
6.5 KiB
C
/*-
|
|
* Copyright (c) 1998 - 2003 Søren Schmidt <sos@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/* ATA commands */
|
|
#define ATA_NOP 0x00 /* NOP command */
|
|
#define ATA_NF_FLUSHQUEUE 0x00 /* flush queued cmd's */
|
|
#define ATA_NF_AUTOPOLL 0x01 /* start autopoll function */
|
|
#define ATA_ATAPI_RESET 0x08 /* reset ATAPI device */
|
|
#define ATA_READ 0x20 /* read command */
|
|
#define ATA_READ48 0x24 /* read command */
|
|
#define ATA_READ_DMA48 0x25 /* read w/DMA command */
|
|
#define ATA_READ_DMA_QUEUED48 0x26 /* read w/DMA QUEUED command */
|
|
#define ATA_READ_MUL48 0x29 /* read multi command */
|
|
#define ATA_WRITE 0x30 /* write command */
|
|
#define ATA_WRITE48 0x34 /* write command */
|
|
#define ATA_WRITE_DMA48 0x35 /* write w/DMA command */
|
|
#define ATA_WRITE_DMA_QUEUED48 0x36 /* write w/DMA QUEUED command */
|
|
#define ATA_WRITE_MUL48 0x39 /* write multi command */
|
|
#define ATA_PACKET_CMD 0xa0 /* packet command */
|
|
#define ATA_ATAPI_IDENTIFY 0xa1 /* get ATAPI params*/
|
|
#define ATA_SERVICE 0xa2 /* service command */
|
|
#define ATA_READ_MUL 0xc4 /* read multi command */
|
|
#define ATA_WRITE_MUL 0xc5 /* write multi command */
|
|
#define ATA_SET_MULTI 0xc6 /* set multi size command */
|
|
#define ATA_READ_DMA_QUEUED 0xc7 /* read w/DMA QUEUED command */
|
|
#define ATA_READ_DMA 0xc8 /* read w/DMA command */
|
|
#define ATA_WRITE_DMA 0xca /* write w/DMA command */
|
|
#define ATA_WRITE_DMA_QUEUED 0xcc /* write w/DMA QUEUED command */
|
|
#define ATA_SLEEP 0xe6 /* sleep command */
|
|
#define ATA_FLUSHCACHE 0xe7 /* flush cache to disk */
|
|
#define ATA_FLUSHCACHE48 0xea /* flush cache to disk */
|
|
#define ATA_ATA_IDENTIFY 0xec /* get ATA params */
|
|
#define ATA_SETFEATURES 0xef /* features command */
|
|
#define ATA_SF_SETXFER 0x03 /* set transfer mode */
|
|
#define ATA_SF_ENAB_WCACHE 0x02 /* enable write cache */
|
|
#define ATA_SF_DIS_WCACHE 0x82 /* disable write cache */
|
|
#define ATA_SF_ENAB_RCACHE 0xaa /* enable readahead cache */
|
|
#define ATA_SF_DIS_RCACHE 0x55 /* disable readahead cache */
|
|
#define ATA_SF_ENAB_RELIRQ 0x5d /* enable release interrupt */
|
|
#define ATA_SF_DIS_RELIRQ 0xdd /* disable release interrupt */
|
|
#define ATA_SF_ENAB_SRVIRQ 0x5e /* enable service interrupt */
|
|
#define ATA_SF_DIS_SRVIRQ 0xde /* disable service interrupt */
|
|
|
|
/* ATAPI commands */
|
|
#define ATAPI_TEST_UNIT_READY 0x00 /* check if device is ready */
|
|
#define ATAPI_REZERO 0x01 /* rewind */
|
|
#define ATAPI_REQUEST_SENSE 0x03 /* get sense data */
|
|
#define ATAPI_FORMAT 0x04 /* format unit */
|
|
#define ATAPI_READ 0x08 /* read data */
|
|
#define ATAPI_WRITE 0x0a /* write data */
|
|
#define ATAPI_WEOF 0x10 /* write filemark */
|
|
#define ATAPI_WF_WRITE 0x01
|
|
#define ATAPI_SPACE 0x11 /* space command */
|
|
#define ATAPI_SP_FM 0x01
|
|
#define ATAPI_SP_EOD 0x03
|
|
#define ATAPI_MODE_SELECT 0x15 /* mode select */
|
|
#define ATAPI_ERASE 0x19 /* erase */
|
|
#define ATAPI_MODE_SENSE 0x1a /* mode sense */
|
|
#define ATAPI_START_STOP 0x1b /* start/stop unit */
|
|
#define ATAPI_SS_LOAD 0x01
|
|
#define ATAPI_SS_RETENSION 0x02
|
|
#define ATAPI_SS_EJECT 0x04
|
|
#define ATAPI_PREVENT_ALLOW 0x1e /* media removal */
|
|
#define ATAPI_READ_FORMAT_CAPACITIES 0x23 /* get format capacities */
|
|
#define ATAPI_READ_CAPACITY 0x25 /* get volume capacity */
|
|
#define ATAPI_READ_BIG 0x28 /* read data */
|
|
#define ATAPI_WRITE_BIG 0x2a /* write data */
|
|
#define ATAPI_LOCATE 0x2b /* locate to position */
|
|
#define ATAPI_READ_POSITION 0x34 /* read position */
|
|
#define ATAPI_SYNCHRONIZE_CACHE 0x35 /* flush buf, close channel */
|
|
#define ATAPI_WRITE_BUFFER 0x3b /* write device buffer */
|
|
#define ATAPI_READ_BUFFER 0x3c /* read device buffer */
|
|
#define ATAPI_READ_SUBCHANNEL 0x42 /* get subchannel info */
|
|
#define ATAPI_READ_TOC 0x43 /* get table of contents */
|
|
#define ATAPI_PLAY_10 0x45 /* play by lba */
|
|
#define ATAPI_PLAY_MSF 0x47 /* play by MSF address */
|
|
#define ATAPI_PLAY_TRACK 0x48 /* play by track number */
|
|
#define ATAPI_PAUSE 0x4b /* pause audio operation */
|
|
#define ATAPI_READ_DISK_INFO 0x51 /* get disk info structure */
|
|
#define ATAPI_READ_TRACK_INFO 0x52 /* get track info structure */
|
|
#define ATAPI_RESERVE_TRACK 0x53 /* reserve track */
|
|
#define ATAPI_SEND_OPC_INFO 0x54 /* send OPC structurek */
|
|
#define ATAPI_MODE_SELECT_BIG 0x55 /* set device parameters */
|
|
#define ATAPI_REPAIR_TRACK 0x58 /* repair track */
|
|
#define ATAPI_READ_MASTER_CUE 0x59 /* read master CUE info */
|
|
#define ATAPI_MODE_SENSE_BIG 0x5a /* get device parameters */
|
|
#define ATAPI_CLOSE_TRACK 0x5b /* close track/session */
|
|
#define ATAPI_READ_BUFFER_CAPACITY 0x5c /* get buffer capicity */
|
|
#define ATAPI_SEND_CUE_SHEET 0x5d /* send CUE sheet */
|
|
#define ATAPI_BLANK 0xa1 /* blank the media */
|
|
#define ATAPI_SEND_KEY 0xa3 /* send DVD key structure */
|
|
#define ATAPI_REPORT_KEY 0xa4 /* get DVD key structure */
|
|
#define ATAPI_PLAY_12 0xa5 /* play by lba */
|
|
#define ATAPI_LOAD_UNLOAD 0xa6 /* changer control command */
|
|
#define ATAPI_READ_STRUCTURE 0xad /* get DVD structure */
|
|
#define ATAPI_PLAY_CD 0xb4 /* universal play command */
|
|
#define ATAPI_SET_SPEED 0xbb /* set drive speed */
|
|
#define ATAPI_MECH_STATUS 0xbd /* get changer status */
|
|
#define ATAPI_READ_CD 0xbe /* read data */
|
|
#define ATAPI_POLL_DSC 0xff /* poll DSC status bit */
|