76edd62f5d
Append CWmax and retry limitation to tp->maxretry instead of rewriting it (will restore pre-r198194 behavior). Noticed by: pfg, hps Reported by: Coverity CID: 1304937, 1304920
4405 lines
118 KiB
C
4405 lines
118 KiB
C
/*-
|
|
* Copyright (c) 2008 Weongyo Jeong <weongyo@FreeBSD.org>
|
|
*
|
|
* Permission to use, copy, modify, and distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
#include <sys/param.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/module.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/kdb.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <sys/rman.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_var.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/ethernet.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
#include <net/if_types.h>
|
|
|
|
#ifdef INET
|
|
#include <netinet/in.h>
|
|
#include <netinet/in_systm.h>
|
|
#include <netinet/in_var.h>
|
|
#include <netinet/if_ether.h>
|
|
#include <netinet/ip.h>
|
|
#endif
|
|
|
|
#include <net80211/ieee80211_var.h>
|
|
#include <net80211/ieee80211_regdomain.h>
|
|
#include <net80211/ieee80211_radiotap.h>
|
|
|
|
#include <dev/usb/usb.h>
|
|
#include <dev/usb/usbdi.h>
|
|
#include "usbdevs.h"
|
|
|
|
#include <dev/usb/wlan/if_urtwreg.h>
|
|
#include <dev/usb/wlan/if_urtwvar.h>
|
|
|
|
static SYSCTL_NODE(_hw_usb, OID_AUTO, urtw, CTLFLAG_RW, 0, "USB Realtek 8187L");
|
|
#ifdef URTW_DEBUG
|
|
int urtw_debug = 0;
|
|
SYSCTL_INT(_hw_usb_urtw, OID_AUTO, debug, CTLFLAG_RWTUN, &urtw_debug, 0,
|
|
"control debugging printfs");
|
|
enum {
|
|
URTW_DEBUG_XMIT = 0x00000001, /* basic xmit operation */
|
|
URTW_DEBUG_RECV = 0x00000002, /* basic recv operation */
|
|
URTW_DEBUG_RESET = 0x00000004, /* reset processing */
|
|
URTW_DEBUG_TX_PROC = 0x00000008, /* tx ISR proc */
|
|
URTW_DEBUG_RX_PROC = 0x00000010, /* rx ISR proc */
|
|
URTW_DEBUG_STATE = 0x00000020, /* 802.11 state transitions */
|
|
URTW_DEBUG_STAT = 0x00000040, /* statistic */
|
|
URTW_DEBUG_INIT = 0x00000080, /* initialization of dev */
|
|
URTW_DEBUG_TXSTATUS = 0x00000100, /* tx status */
|
|
URTW_DEBUG_ANY = 0xffffffff
|
|
};
|
|
#define DPRINTF(sc, m, fmt, ...) do { \
|
|
if (sc->sc_debug & (m)) \
|
|
printf(fmt, __VA_ARGS__); \
|
|
} while (0)
|
|
#else
|
|
#define DPRINTF(sc, m, fmt, ...) do { \
|
|
(void) sc; \
|
|
} while (0)
|
|
#endif
|
|
static int urtw_preamble_mode = URTW_PREAMBLE_MODE_LONG;
|
|
SYSCTL_INT(_hw_usb_urtw, OID_AUTO, preamble_mode, CTLFLAG_RWTUN,
|
|
&urtw_preamble_mode, 0, "set the preable mode (long or short)");
|
|
|
|
/* recognized device vendors/products */
|
|
#define urtw_lookup(v, p) \
|
|
((const struct urtw_type *)usb_lookup(urtw_devs, v, p))
|
|
#define URTW_DEV_B(v,p) \
|
|
{ USB_VPI(USB_VENDOR_##v, USB_PRODUCT_##v##_##p, URTW_REV_RTL8187B) }
|
|
#define URTW_DEV_L(v,p) \
|
|
{ USB_VPI(USB_VENDOR_##v, USB_PRODUCT_##v##_##p, URTW_REV_RTL8187L) }
|
|
#define URTW_REV_RTL8187B 0
|
|
#define URTW_REV_RTL8187L 1
|
|
static const STRUCT_USB_HOST_ID urtw_devs[] = {
|
|
URTW_DEV_B(NETGEAR, WG111V3),
|
|
URTW_DEV_B(REALTEK, RTL8187B_0),
|
|
URTW_DEV_B(REALTEK, RTL8187B_1),
|
|
URTW_DEV_B(REALTEK, RTL8187B_2),
|
|
URTW_DEV_B(SITECOMEU, WL168V4),
|
|
URTW_DEV_L(ASUS, P5B_WIFI),
|
|
URTW_DEV_L(BELKIN, F5D7050E),
|
|
URTW_DEV_L(LINKSYS4, WUSB54GCV2),
|
|
URTW_DEV_L(NETGEAR, WG111V2),
|
|
URTW_DEV_L(REALTEK, RTL8187),
|
|
URTW_DEV_L(SITECOMEU, WL168V1),
|
|
URTW_DEV_L(SURECOM, EP9001G2A),
|
|
{ USB_VPI(USB_VENDOR_OVISLINK, 0x8187, URTW_REV_RTL8187L) },
|
|
{ USB_VPI(USB_VENDOR_DICKSMITH, 0x9401, URTW_REV_RTL8187L) },
|
|
{ USB_VPI(USB_VENDOR_HP, 0xca02, URTW_REV_RTL8187L) },
|
|
{ USB_VPI(USB_VENDOR_LOGITEC, 0x010c, URTW_REV_RTL8187L) },
|
|
{ USB_VPI(USB_VENDOR_NETGEAR, 0x6100, URTW_REV_RTL8187L) },
|
|
{ USB_VPI(USB_VENDOR_SPHAIRON, 0x0150, URTW_REV_RTL8187L) },
|
|
{ USB_VPI(USB_VENDOR_QCOM, 0x6232, URTW_REV_RTL8187L) },
|
|
#undef URTW_DEV_L
|
|
#undef URTW_DEV_B
|
|
};
|
|
|
|
#define urtw_read8_m(sc, val, data) do { \
|
|
error = urtw_read8_c(sc, val, data); \
|
|
if (error != 0) \
|
|
goto fail; \
|
|
} while (0)
|
|
#define urtw_write8_m(sc, val, data) do { \
|
|
error = urtw_write8_c(sc, val, data); \
|
|
if (error != 0) \
|
|
goto fail; \
|
|
} while (0)
|
|
#define urtw_read16_m(sc, val, data) do { \
|
|
error = urtw_read16_c(sc, val, data); \
|
|
if (error != 0) \
|
|
goto fail; \
|
|
} while (0)
|
|
#define urtw_write16_m(sc, val, data) do { \
|
|
error = urtw_write16_c(sc, val, data); \
|
|
if (error != 0) \
|
|
goto fail; \
|
|
} while (0)
|
|
#define urtw_read32_m(sc, val, data) do { \
|
|
error = urtw_read32_c(sc, val, data); \
|
|
if (error != 0) \
|
|
goto fail; \
|
|
} while (0)
|
|
#define urtw_write32_m(sc, val, data) do { \
|
|
error = urtw_write32_c(sc, val, data); \
|
|
if (error != 0) \
|
|
goto fail; \
|
|
} while (0)
|
|
#define urtw_8187_write_phy_ofdm(sc, val, data) do { \
|
|
error = urtw_8187_write_phy_ofdm_c(sc, val, data); \
|
|
if (error != 0) \
|
|
goto fail; \
|
|
} while (0)
|
|
#define urtw_8187_write_phy_cck(sc, val, data) do { \
|
|
error = urtw_8187_write_phy_cck_c(sc, val, data); \
|
|
if (error != 0) \
|
|
goto fail; \
|
|
} while (0)
|
|
#define urtw_8225_write(sc, val, data) do { \
|
|
error = urtw_8225_write_c(sc, val, data); \
|
|
if (error != 0) \
|
|
goto fail; \
|
|
} while (0)
|
|
|
|
struct urtw_pair {
|
|
uint32_t reg;
|
|
uint32_t val;
|
|
};
|
|
|
|
static uint8_t urtw_8225_agc[] = {
|
|
0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9d, 0x9c, 0x9b,
|
|
0x9a, 0x99, 0x98, 0x97, 0x96, 0x95, 0x94, 0x93, 0x92, 0x91, 0x90,
|
|
0x8f, 0x8e, 0x8d, 0x8c, 0x8b, 0x8a, 0x89, 0x88, 0x87, 0x86, 0x85,
|
|
0x84, 0x83, 0x82, 0x81, 0x80, 0x3f, 0x3e, 0x3d, 0x3c, 0x3b, 0x3a,
|
|
0x39, 0x38, 0x37, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0x30, 0x2f,
|
|
0x2e, 0x2d, 0x2c, 0x2b, 0x2a, 0x29, 0x28, 0x27, 0x26, 0x25, 0x24,
|
|
0x23, 0x22, 0x21, 0x20, 0x1f, 0x1e, 0x1d, 0x1c, 0x1b, 0x1a, 0x19,
|
|
0x18, 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x10, 0x0f, 0x0e,
|
|
0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08, 0x07, 0x06, 0x05, 0x04, 0x03,
|
|
0x02, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
|
|
0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
|
|
0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01
|
|
};
|
|
|
|
static uint8_t urtw_8225z2_agc[] = {
|
|
0x5e, 0x5e, 0x5e, 0x5e, 0x5d, 0x5b, 0x59, 0x57, 0x55, 0x53, 0x51,
|
|
0x4f, 0x4d, 0x4b, 0x49, 0x47, 0x45, 0x43, 0x41, 0x3f, 0x3d, 0x3b,
|
|
0x39, 0x37, 0x35, 0x33, 0x31, 0x2f, 0x2d, 0x2b, 0x29, 0x27, 0x25,
|
|
0x23, 0x21, 0x1f, 0x1d, 0x1b, 0x19, 0x17, 0x15, 0x13, 0x11, 0x0f,
|
|
0x0d, 0x0b, 0x09, 0x07, 0x05, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01,
|
|
0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x19, 0x19,
|
|
0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x20, 0x21, 0x22, 0x23,
|
|
0x24, 0x25, 0x26, 0x26, 0x27, 0x27, 0x28, 0x28, 0x29, 0x2a, 0x2a,
|
|
0x2a, 0x2b, 0x2b, 0x2b, 0x2c, 0x2c, 0x2c, 0x2d, 0x2d, 0x2d, 0x2d,
|
|
0x2e, 0x2e, 0x2e, 0x2e, 0x2f, 0x2f, 0x2f, 0x30, 0x30, 0x31, 0x31,
|
|
0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31,
|
|
0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31
|
|
};
|
|
|
|
static const uint8_t urtw_chan_2ghz[] =
|
|
{ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 };
|
|
|
|
static uint32_t urtw_8225_channel[] = {
|
|
0x0000, /* dummy channel 0 */
|
|
0x085c, /* 1 */
|
|
0x08dc, /* 2 */
|
|
0x095c, /* 3 */
|
|
0x09dc, /* 4 */
|
|
0x0a5c, /* 5 */
|
|
0x0adc, /* 6 */
|
|
0x0b5c, /* 7 */
|
|
0x0bdc, /* 8 */
|
|
0x0c5c, /* 9 */
|
|
0x0cdc, /* 10 */
|
|
0x0d5c, /* 11 */
|
|
0x0ddc, /* 12 */
|
|
0x0e5c, /* 13 */
|
|
0x0f72, /* 14 */
|
|
};
|
|
|
|
static uint8_t urtw_8225_gain[] = {
|
|
0x23, 0x88, 0x7c, 0xa5, /* -82dbm */
|
|
0x23, 0x88, 0x7c, 0xb5, /* -82dbm */
|
|
0x23, 0x88, 0x7c, 0xc5, /* -82dbm */
|
|
0x33, 0x80, 0x79, 0xc5, /* -78dbm */
|
|
0x43, 0x78, 0x76, 0xc5, /* -74dbm */
|
|
0x53, 0x60, 0x73, 0xc5, /* -70dbm */
|
|
0x63, 0x58, 0x70, 0xc5, /* -66dbm */
|
|
};
|
|
|
|
static struct urtw_pair urtw_8225_rf_part1[] = {
|
|
{ 0x00, 0x0067 }, { 0x01, 0x0fe0 }, { 0x02, 0x044d }, { 0x03, 0x0441 },
|
|
{ 0x04, 0x0486 }, { 0x05, 0x0bc0 }, { 0x06, 0x0ae6 }, { 0x07, 0x082a },
|
|
{ 0x08, 0x001f }, { 0x09, 0x0334 }, { 0x0a, 0x0fd4 }, { 0x0b, 0x0391 },
|
|
{ 0x0c, 0x0050 }, { 0x0d, 0x06db }, { 0x0e, 0x0029 }, { 0x0f, 0x0914 },
|
|
};
|
|
|
|
static struct urtw_pair urtw_8225_rf_part2[] = {
|
|
{ 0x00, 0x01 }, { 0x01, 0x02 }, { 0x02, 0x42 }, { 0x03, 0x00 },
|
|
{ 0x04, 0x00 }, { 0x05, 0x00 }, { 0x06, 0x40 }, { 0x07, 0x00 },
|
|
{ 0x08, 0x40 }, { 0x09, 0xfe }, { 0x0a, 0x09 }, { 0x0b, 0x80 },
|
|
{ 0x0c, 0x01 }, { 0x0e, 0xd3 }, { 0x0f, 0x38 }, { 0x10, 0x84 },
|
|
{ 0x11, 0x06 }, { 0x12, 0x20 }, { 0x13, 0x20 }, { 0x14, 0x00 },
|
|
{ 0x15, 0x40 }, { 0x16, 0x00 }, { 0x17, 0x40 }, { 0x18, 0xef },
|
|
{ 0x19, 0x19 }, { 0x1a, 0x20 }, { 0x1b, 0x76 }, { 0x1c, 0x04 },
|
|
{ 0x1e, 0x95 }, { 0x1f, 0x75 }, { 0x20, 0x1f }, { 0x21, 0x27 },
|
|
{ 0x22, 0x16 }, { 0x24, 0x46 }, { 0x25, 0x20 }, { 0x26, 0x90 },
|
|
{ 0x27, 0x88 }
|
|
};
|
|
|
|
static struct urtw_pair urtw_8225_rf_part3[] = {
|
|
{ 0x00, 0x98 }, { 0x03, 0x20 }, { 0x04, 0x7e }, { 0x05, 0x12 },
|
|
{ 0x06, 0xfc }, { 0x07, 0x78 }, { 0x08, 0x2e }, { 0x10, 0x9b },
|
|
{ 0x11, 0x88 }, { 0x12, 0x47 }, { 0x13, 0xd0 }, { 0x19, 0x00 },
|
|
{ 0x1a, 0xa0 }, { 0x1b, 0x08 }, { 0x40, 0x86 }, { 0x41, 0x8d },
|
|
{ 0x42, 0x15 }, { 0x43, 0x18 }, { 0x44, 0x1f }, { 0x45, 0x1e },
|
|
{ 0x46, 0x1a }, { 0x47, 0x15 }, { 0x48, 0x10 }, { 0x49, 0x0a },
|
|
{ 0x4a, 0x05 }, { 0x4b, 0x02 }, { 0x4c, 0x05 }
|
|
};
|
|
|
|
static uint16_t urtw_8225_rxgain[] = {
|
|
0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409,
|
|
0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541,
|
|
0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583,
|
|
0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644,
|
|
0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688,
|
|
0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745,
|
|
0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789,
|
|
0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793,
|
|
0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d,
|
|
0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9,
|
|
0x07aa, 0x07ab, 0x07ac, 0x07ad, 0x07b0, 0x07b1, 0x07b2, 0x07b3,
|
|
0x07b4, 0x07b5, 0x07b8, 0x07b9, 0x07ba, 0x07bb, 0x07bb
|
|
};
|
|
|
|
static uint8_t urtw_8225_threshold[] = {
|
|
0x8d, 0x8d, 0x8d, 0x8d, 0x9d, 0xad, 0xbd,
|
|
};
|
|
|
|
static uint8_t urtw_8225_tx_gain_cck_ofdm[] = {
|
|
0x02, 0x06, 0x0e, 0x1e, 0x3e, 0x7e
|
|
};
|
|
|
|
static uint8_t urtw_8225_txpwr_cck[] = {
|
|
0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02,
|
|
0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02,
|
|
0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02,
|
|
0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02,
|
|
0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03,
|
|
0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03
|
|
};
|
|
|
|
static uint8_t urtw_8225_txpwr_cck_ch14[] = {
|
|
0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00,
|
|
0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00,
|
|
0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00,
|
|
0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00,
|
|
0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00,
|
|
0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00
|
|
};
|
|
|
|
static uint8_t urtw_8225_txpwr_ofdm[]={
|
|
0x80, 0x90, 0xa2, 0xb5, 0xcb, 0xe4
|
|
};
|
|
|
|
static uint8_t urtw_8225v2_gain_bg[]={
|
|
0x23, 0x15, 0xa5, /* -82-1dbm */
|
|
0x23, 0x15, 0xb5, /* -82-2dbm */
|
|
0x23, 0x15, 0xc5, /* -82-3dbm */
|
|
0x33, 0x15, 0xc5, /* -78dbm */
|
|
0x43, 0x15, 0xc5, /* -74dbm */
|
|
0x53, 0x15, 0xc5, /* -70dbm */
|
|
0x63, 0x15, 0xc5, /* -66dbm */
|
|
};
|
|
|
|
static struct urtw_pair urtw_8225v2_rf_part1[] = {
|
|
{ 0x00, 0x02bf }, { 0x01, 0x0ee0 }, { 0x02, 0x044d }, { 0x03, 0x0441 },
|
|
{ 0x04, 0x08c3 }, { 0x05, 0x0c72 }, { 0x06, 0x00e6 }, { 0x07, 0x082a },
|
|
{ 0x08, 0x003f }, { 0x09, 0x0335 }, { 0x0a, 0x09d4 }, { 0x0b, 0x07bb },
|
|
{ 0x0c, 0x0850 }, { 0x0d, 0x0cdf }, { 0x0e, 0x002b }, { 0x0f, 0x0114 }
|
|
};
|
|
|
|
static struct urtw_pair urtw_8225v2b_rf_part0[] = {
|
|
{ 0x00, 0x00b7 }, { 0x01, 0x0ee0 }, { 0x02, 0x044d }, { 0x03, 0x0441 },
|
|
{ 0x04, 0x08c3 }, { 0x05, 0x0c72 }, { 0x06, 0x00e6 }, { 0x07, 0x082a },
|
|
{ 0x08, 0x003f }, { 0x09, 0x0335 }, { 0x0a, 0x09d4 }, { 0x0b, 0x07bb },
|
|
{ 0x0c, 0x0850 }, { 0x0d, 0x0cdf }, { 0x0e, 0x002b }, { 0x0f, 0x0114 }
|
|
};
|
|
|
|
static struct urtw_pair urtw_8225v2b_rf_part1[] = {
|
|
{0x0f0, 0x32}, {0x0f1, 0x32}, {0x0f2, 0x00},
|
|
{0x0f3, 0x00}, {0x0f4, 0x32}, {0x0f5, 0x43},
|
|
{0x0f6, 0x00}, {0x0f7, 0x00}, {0x0f8, 0x46},
|
|
{0x0f9, 0xa4}, {0x0fa, 0x00}, {0x0fb, 0x00},
|
|
{0x0fc, 0x96}, {0x0fd, 0xa4}, {0x0fe, 0x00},
|
|
{0x0ff, 0x00}, {0x158, 0x4b}, {0x159, 0x00},
|
|
{0x15a, 0x4b}, {0x15b, 0x00}, {0x160, 0x4b},
|
|
{0x161, 0x09}, {0x162, 0x4b}, {0x163, 0x09},
|
|
{0x1ce, 0x0f}, {0x1cf, 0x00}, {0x1e0, 0xff},
|
|
{0x1e1, 0x0f}, {0x1e2, 0x00}, {0x1f0, 0x4e},
|
|
{0x1f1, 0x01}, {0x1f2, 0x02}, {0x1f3, 0x03},
|
|
{0x1f4, 0x04}, {0x1f5, 0x05}, {0x1f6, 0x06},
|
|
{0x1f7, 0x07}, {0x1f8, 0x08}, {0x24e, 0x00},
|
|
{0x20c, 0x04}, {0x221, 0x61}, {0x222, 0x68},
|
|
{0x223, 0x6f}, {0x224, 0x76}, {0x225, 0x7d},
|
|
{0x226, 0x84}, {0x227, 0x8d}, {0x24d, 0x08},
|
|
{0x250, 0x05}, {0x251, 0xf5}, {0x252, 0x04},
|
|
{0x253, 0xa0}, {0x254, 0x1f}, {0x255, 0x23},
|
|
{0x256, 0x45}, {0x257, 0x67}, {0x258, 0x08},
|
|
{0x259, 0x08}, {0x25a, 0x08}, {0x25b, 0x08},
|
|
{0x260, 0x08}, {0x261, 0x08}, {0x262, 0x08},
|
|
{0x263, 0x08}, {0x264, 0xcf}, {0x272, 0x56},
|
|
{0x273, 0x9a}, {0x034, 0xf0}, {0x035, 0x0f},
|
|
{0x05b, 0x40}, {0x084, 0x88}, {0x085, 0x24},
|
|
{0x088, 0x54}, {0x08b, 0xb8}, {0x08c, 0x07},
|
|
{0x08d, 0x00}, {0x094, 0x1b}, {0x095, 0x12},
|
|
{0x096, 0x00}, {0x097, 0x06}, {0x09d, 0x1a},
|
|
{0x09f, 0x10}, {0x0b4, 0x22}, {0x0be, 0x80},
|
|
{0x0db, 0x00}, {0x0ee, 0x00}, {0x091, 0x03},
|
|
{0x24c, 0x00}, {0x39f, 0x00}, {0x08c, 0x01},
|
|
{0x08d, 0x10}, {0x08e, 0x08}, {0x08f, 0x00}
|
|
};
|
|
|
|
static struct urtw_pair urtw_8225v2_rf_part2[] = {
|
|
{ 0x00, 0x01 }, { 0x01, 0x02 }, { 0x02, 0x42 }, { 0x03, 0x00 },
|
|
{ 0x04, 0x00 }, { 0x05, 0x00 }, { 0x06, 0x40 }, { 0x07, 0x00 },
|
|
{ 0x08, 0x40 }, { 0x09, 0xfe }, { 0x0a, 0x08 }, { 0x0b, 0x80 },
|
|
{ 0x0c, 0x01 }, { 0x0d, 0x43 }, { 0x0e, 0xd3 }, { 0x0f, 0x38 },
|
|
{ 0x10, 0x84 }, { 0x11, 0x07 }, { 0x12, 0x20 }, { 0x13, 0x20 },
|
|
{ 0x14, 0x00 }, { 0x15, 0x40 }, { 0x16, 0x00 }, { 0x17, 0x40 },
|
|
{ 0x18, 0xef }, { 0x19, 0x19 }, { 0x1a, 0x20 }, { 0x1b, 0x15 },
|
|
{ 0x1c, 0x04 }, { 0x1d, 0xc5 }, { 0x1e, 0x95 }, { 0x1f, 0x75 },
|
|
{ 0x20, 0x1f }, { 0x21, 0x17 }, { 0x22, 0x16 }, { 0x23, 0x80 },
|
|
{ 0x24, 0x46 }, { 0x25, 0x00 }, { 0x26, 0x90 }, { 0x27, 0x88 }
|
|
};
|
|
|
|
static struct urtw_pair urtw_8225v2b_rf_part2[] = {
|
|
{ 0x00, 0x10 }, { 0x01, 0x0d }, { 0x02, 0x01 }, { 0x03, 0x00 },
|
|
{ 0x04, 0x14 }, { 0x05, 0xfb }, { 0x06, 0xfb }, { 0x07, 0x60 },
|
|
{ 0x08, 0x00 }, { 0x09, 0x60 }, { 0x0a, 0x00 }, { 0x0b, 0x00 },
|
|
{ 0x0c, 0x00 }, { 0x0d, 0x5c }, { 0x0e, 0x00 }, { 0x0f, 0x00 },
|
|
{ 0x10, 0x40 }, { 0x11, 0x00 }, { 0x12, 0x40 }, { 0x13, 0x00 },
|
|
{ 0x14, 0x00 }, { 0x15, 0x00 }, { 0x16, 0xa8 }, { 0x17, 0x26 },
|
|
{ 0x18, 0x32 }, { 0x19, 0x33 }, { 0x1a, 0x07 }, { 0x1b, 0xa5 },
|
|
{ 0x1c, 0x6f }, { 0x1d, 0x55 }, { 0x1e, 0xc8 }, { 0x1f, 0xb3 },
|
|
{ 0x20, 0x0a }, { 0x21, 0xe1 }, { 0x22, 0x2C }, { 0x23, 0x8a },
|
|
{ 0x24, 0x86 }, { 0x25, 0x83 }, { 0x26, 0x34 }, { 0x27, 0x0f },
|
|
{ 0x28, 0x4f }, { 0x29, 0x24 }, { 0x2a, 0x6f }, { 0x2b, 0xc2 },
|
|
{ 0x2c, 0x6b }, { 0x2d, 0x40 }, { 0x2e, 0x80 }, { 0x2f, 0x00 },
|
|
{ 0x30, 0xc0 }, { 0x31, 0xc1 }, { 0x32, 0x58 }, { 0x33, 0xf1 },
|
|
{ 0x34, 0x00 }, { 0x35, 0xe4 }, { 0x36, 0x90 }, { 0x37, 0x3e },
|
|
{ 0x38, 0x6d }, { 0x39, 0x3c }, { 0x3a, 0xfb }, { 0x3b, 0x07 }
|
|
};
|
|
|
|
static struct urtw_pair urtw_8225v2_rf_part3[] = {
|
|
{ 0x00, 0x98 }, { 0x03, 0x20 }, { 0x04, 0x7e }, { 0x05, 0x12 },
|
|
{ 0x06, 0xfc }, { 0x07, 0x78 }, { 0x08, 0x2e }, { 0x09, 0x11 },
|
|
{ 0x0a, 0x17 }, { 0x0b, 0x11 }, { 0x10, 0x9b }, { 0x11, 0x88 },
|
|
{ 0x12, 0x47 }, { 0x13, 0xd0 }, { 0x19, 0x00 }, { 0x1a, 0xa0 },
|
|
{ 0x1b, 0x08 }, { 0x1d, 0x00 }, { 0x40, 0x86 }, { 0x41, 0x9d },
|
|
{ 0x42, 0x15 }, { 0x43, 0x18 }, { 0x44, 0x36 }, { 0x45, 0x35 },
|
|
{ 0x46, 0x2e }, { 0x47, 0x25 }, { 0x48, 0x1c }, { 0x49, 0x12 },
|
|
{ 0x4a, 0x09 }, { 0x4b, 0x04 }, { 0x4c, 0x05 }
|
|
};
|
|
|
|
static uint16_t urtw_8225v2_rxgain[] = {
|
|
0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0008, 0x0009,
|
|
0x000a, 0x000b, 0x0102, 0x0103, 0x0104, 0x0105, 0x0140, 0x0141,
|
|
0x0142, 0x0143, 0x0144, 0x0145, 0x0180, 0x0181, 0x0182, 0x0183,
|
|
0x0184, 0x0185, 0x0188, 0x0189, 0x018a, 0x018b, 0x0243, 0x0244,
|
|
0x0245, 0x0280, 0x0281, 0x0282, 0x0283, 0x0284, 0x0285, 0x0288,
|
|
0x0289, 0x028a, 0x028b, 0x028c, 0x0342, 0x0343, 0x0344, 0x0345,
|
|
0x0380, 0x0381, 0x0382, 0x0383, 0x0384, 0x0385, 0x0388, 0x0389,
|
|
0x038a, 0x038b, 0x038c, 0x038d, 0x0390, 0x0391, 0x0392, 0x0393,
|
|
0x0394, 0x0395, 0x0398, 0x0399, 0x039a, 0x039b, 0x039c, 0x039d,
|
|
0x03a0, 0x03a1, 0x03a2, 0x03a3, 0x03a4, 0x03a5, 0x03a8, 0x03a9,
|
|
0x03aa, 0x03ab, 0x03ac, 0x03ad, 0x03b0, 0x03b1, 0x03b2, 0x03b3,
|
|
0x03b4, 0x03b5, 0x03b8, 0x03b9, 0x03ba, 0x03bb, 0x03bb
|
|
};
|
|
|
|
static uint16_t urtw_8225v2b_rxgain[] = {
|
|
0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409,
|
|
0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541,
|
|
0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583,
|
|
0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644,
|
|
0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688,
|
|
0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745,
|
|
0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789,
|
|
0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793,
|
|
0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d,
|
|
0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9,
|
|
0x03aa, 0x03ab, 0x03ac, 0x03ad, 0x03b0, 0x03b1, 0x03b2, 0x03b3,
|
|
0x03b4, 0x03b5, 0x03b8, 0x03b9, 0x03ba, 0x03bb, 0x03bb
|
|
};
|
|
|
|
static uint8_t urtw_8225v2_tx_gain_cck_ofdm[] = {
|
|
0x00, 0x01, 0x02, 0x03, 0x04, 0x05,
|
|
0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b,
|
|
0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11,
|
|
0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
|
|
0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d,
|
|
0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23,
|
|
};
|
|
|
|
static uint8_t urtw_8225v2_txpwr_cck[] = {
|
|
0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04
|
|
};
|
|
|
|
static uint8_t urtw_8225v2_txpwr_cck_ch14[] = {
|
|
0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00
|
|
};
|
|
|
|
static uint8_t urtw_8225v2b_txpwr_cck[] = {
|
|
0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04,
|
|
0x30, 0x2f, 0x29, 0x21, 0x19, 0x10, 0x08, 0x03,
|
|
0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03,
|
|
0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03
|
|
};
|
|
|
|
static uint8_t urtw_8225v2b_txpwr_cck_ch14[] = {
|
|
0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00,
|
|
0x30, 0x2f, 0x29, 0x15, 0x00, 0x00, 0x00, 0x00,
|
|
0x30, 0x2f, 0x29, 0x15, 0x00, 0x00, 0x00, 0x00,
|
|
0x30, 0x2f, 0x29, 0x15, 0x00, 0x00, 0x00, 0x00
|
|
};
|
|
|
|
static struct urtw_pair urtw_ratetable[] = {
|
|
{ 2, 0 }, { 4, 1 }, { 11, 2 }, { 12, 4 }, { 18, 5 },
|
|
{ 22, 3 }, { 24, 6 }, { 36, 7 }, { 48, 8 }, { 72, 9 },
|
|
{ 96, 10 }, { 108, 11 }
|
|
};
|
|
|
|
#if 0
|
|
static const uint8_t urtw_8187b_reg_table[][3] = {
|
|
{ 0xf0, 0x32, 0 }, { 0xf1, 0x32, 0 }, { 0xf2, 0x00, 0 },
|
|
{ 0xf3, 0x00, 0 }, { 0xf4, 0x32, 0 }, { 0xf5, 0x43, 0 },
|
|
{ 0xf6, 0x00, 0 }, { 0xf7, 0x00, 0 }, { 0xf8, 0x46, 0 },
|
|
{ 0xf9, 0xa4, 0 }, { 0xfa, 0x00, 0 }, { 0xfb, 0x00, 0 },
|
|
{ 0xfc, 0x96, 0 }, { 0xfd, 0xa4, 0 }, { 0xfe, 0x00, 0 },
|
|
{ 0xff, 0x00, 0 }, { 0x58, 0x4b, 1 }, { 0x59, 0x00, 1 },
|
|
{ 0x5a, 0x4b, 1 }, { 0x5b, 0x00, 1 }, { 0x60, 0x4b, 1 },
|
|
{ 0x61, 0x09, 1 }, { 0x62, 0x4b, 1 }, { 0x63, 0x09, 1 },
|
|
{ 0xce, 0x0f, 1 }, { 0xcf, 0x00, 1 }, { 0xe0, 0xff, 1 },
|
|
{ 0xe1, 0x0f, 1 }, { 0xe2, 0x00, 1 }, { 0xf0, 0x4e, 1 },
|
|
{ 0xf1, 0x01, 1 }, { 0xf2, 0x02, 1 }, { 0xf3, 0x03, 1 },
|
|
{ 0xf4, 0x04, 1 }, { 0xf5, 0x05, 1 }, { 0xf6, 0x06, 1 },
|
|
{ 0xf7, 0x07, 1 }, { 0xf8, 0x08, 1 }, { 0x4e, 0x00, 2 },
|
|
{ 0x0c, 0x04, 2 }, { 0x21, 0x61, 2 }, { 0x22, 0x68, 2 },
|
|
{ 0x23, 0x6f, 2 }, { 0x24, 0x76, 2 }, { 0x25, 0x7d, 2 },
|
|
{ 0x26, 0x84, 2 }, { 0x27, 0x8d, 2 }, { 0x4d, 0x08, 2 },
|
|
{ 0x50, 0x05, 2 }, { 0x51, 0xf5, 2 }, { 0x52, 0x04, 2 },
|
|
{ 0x53, 0xa0, 2 }, { 0x54, 0x1f, 2 }, { 0x55, 0x23, 2 },
|
|
{ 0x56, 0x45, 2 }, { 0x57, 0x67, 2 }, { 0x58, 0x08, 2 },
|
|
{ 0x59, 0x08, 2 }, { 0x5a, 0x08, 2 }, { 0x5b, 0x08, 2 },
|
|
{ 0x60, 0x08, 2 }, { 0x61, 0x08, 2 }, { 0x62, 0x08, 2 },
|
|
{ 0x63, 0x08, 2 }, { 0x64, 0xcf, 2 }, { 0x72, 0x56, 2 },
|
|
{ 0x73, 0x9a, 2 }, { 0x34, 0xf0, 0 }, { 0x35, 0x0f, 0 },
|
|
{ 0x5b, 0x40, 0 }, { 0x84, 0x88, 0 }, { 0x85, 0x24, 0 },
|
|
{ 0x88, 0x54, 0 }, { 0x8b, 0xb8, 0 }, { 0x8c, 0x07, 0 },
|
|
{ 0x8d, 0x00, 0 }, { 0x94, 0x1b, 0 }, { 0x95, 0x12, 0 },
|
|
{ 0x96, 0x00, 0 }, { 0x97, 0x06, 0 }, { 0x9d, 0x1a, 0 },
|
|
{ 0x9f, 0x10, 0 }, { 0xb4, 0x22, 0 }, { 0xbe, 0x80, 0 },
|
|
{ 0xdb, 0x00, 0 }, { 0xee, 0x00, 0 }, { 0x91, 0x03, 0 },
|
|
{ 0x4c, 0x00, 2 }, { 0x9f, 0x00, 3 }, { 0x8c, 0x01, 0 },
|
|
{ 0x8d, 0x10, 0 }, { 0x8e, 0x08, 0 }, { 0x8f, 0x00, 0 }
|
|
};
|
|
#endif
|
|
|
|
static usb_callback_t urtw_bulk_rx_callback;
|
|
static usb_callback_t urtw_bulk_tx_callback;
|
|
static usb_callback_t urtw_bulk_tx_status_callback;
|
|
|
|
static const struct usb_config urtw_8187b_usbconfig[URTW_8187B_N_XFERS] = {
|
|
[URTW_8187B_BULK_RX] = {
|
|
.type = UE_BULK,
|
|
.endpoint = 0x83,
|
|
.direction = UE_DIR_IN,
|
|
.bufsize = MCLBYTES,
|
|
.flags = {
|
|
.ext_buffer = 1,
|
|
.pipe_bof = 1,
|
|
.short_xfer_ok = 1
|
|
},
|
|
.callback = urtw_bulk_rx_callback
|
|
},
|
|
[URTW_8187B_BULK_TX_STATUS] = {
|
|
.type = UE_BULK,
|
|
.endpoint = 0x89,
|
|
.direction = UE_DIR_IN,
|
|
.bufsize = sizeof(uint64_t),
|
|
.flags = {
|
|
.pipe_bof = 1,
|
|
.short_xfer_ok = 1
|
|
},
|
|
.callback = urtw_bulk_tx_status_callback
|
|
},
|
|
[URTW_8187B_BULK_TX_BE] = {
|
|
.type = UE_BULK,
|
|
.endpoint = URTW_8187B_TXPIPE_BE,
|
|
.direction = UE_DIR_OUT,
|
|
.bufsize = URTW_TX_MAXSIZE * URTW_TX_DATA_LIST_COUNT,
|
|
.flags = {
|
|
.force_short_xfer = 1,
|
|
.pipe_bof = 1,
|
|
},
|
|
.callback = urtw_bulk_tx_callback,
|
|
.timeout = URTW_DATA_TIMEOUT
|
|
},
|
|
[URTW_8187B_BULK_TX_BK] = {
|
|
.type = UE_BULK,
|
|
.endpoint = URTW_8187B_TXPIPE_BK,
|
|
.direction = UE_DIR_OUT,
|
|
.bufsize = URTW_TX_MAXSIZE,
|
|
.flags = {
|
|
.ext_buffer = 1,
|
|
.force_short_xfer = 1,
|
|
.pipe_bof = 1,
|
|
},
|
|
.callback = urtw_bulk_tx_callback,
|
|
.timeout = URTW_DATA_TIMEOUT
|
|
},
|
|
[URTW_8187B_BULK_TX_VI] = {
|
|
.type = UE_BULK,
|
|
.endpoint = URTW_8187B_TXPIPE_VI,
|
|
.direction = UE_DIR_OUT,
|
|
.bufsize = URTW_TX_MAXSIZE,
|
|
.flags = {
|
|
.ext_buffer = 1,
|
|
.force_short_xfer = 1,
|
|
.pipe_bof = 1,
|
|
},
|
|
.callback = urtw_bulk_tx_callback,
|
|
.timeout = URTW_DATA_TIMEOUT
|
|
},
|
|
[URTW_8187B_BULK_TX_VO] = {
|
|
.type = UE_BULK,
|
|
.endpoint = URTW_8187B_TXPIPE_VO,
|
|
.direction = UE_DIR_OUT,
|
|
.bufsize = URTW_TX_MAXSIZE,
|
|
.flags = {
|
|
.ext_buffer = 1,
|
|
.force_short_xfer = 1,
|
|
.pipe_bof = 1,
|
|
},
|
|
.callback = urtw_bulk_tx_callback,
|
|
.timeout = URTW_DATA_TIMEOUT
|
|
},
|
|
[URTW_8187B_BULK_TX_EP12] = {
|
|
.type = UE_BULK,
|
|
.endpoint = 0xc,
|
|
.direction = UE_DIR_OUT,
|
|
.bufsize = URTW_TX_MAXSIZE,
|
|
.flags = {
|
|
.ext_buffer = 1,
|
|
.force_short_xfer = 1,
|
|
.pipe_bof = 1,
|
|
},
|
|
.callback = urtw_bulk_tx_callback,
|
|
.timeout = URTW_DATA_TIMEOUT
|
|
}
|
|
};
|
|
|
|
static const struct usb_config urtw_8187l_usbconfig[URTW_8187L_N_XFERS] = {
|
|
[URTW_8187L_BULK_RX] = {
|
|
.type = UE_BULK,
|
|
.endpoint = 0x81,
|
|
.direction = UE_DIR_IN,
|
|
.bufsize = MCLBYTES,
|
|
.flags = {
|
|
.ext_buffer = 1,
|
|
.pipe_bof = 1,
|
|
.short_xfer_ok = 1
|
|
},
|
|
.callback = urtw_bulk_rx_callback
|
|
},
|
|
[URTW_8187L_BULK_TX_LOW] = {
|
|
.type = UE_BULK,
|
|
.endpoint = 0x2,
|
|
.direction = UE_DIR_OUT,
|
|
.bufsize = URTW_TX_MAXSIZE * URTW_TX_DATA_LIST_COUNT,
|
|
.flags = {
|
|
.force_short_xfer = 1,
|
|
.pipe_bof = 1,
|
|
},
|
|
.callback = urtw_bulk_tx_callback,
|
|
.timeout = URTW_DATA_TIMEOUT
|
|
},
|
|
[URTW_8187L_BULK_TX_NORMAL] = {
|
|
.type = UE_BULK,
|
|
.endpoint = 0x3,
|
|
.direction = UE_DIR_OUT,
|
|
.bufsize = URTW_TX_MAXSIZE,
|
|
.flags = {
|
|
.ext_buffer = 1,
|
|
.force_short_xfer = 1,
|
|
.pipe_bof = 1,
|
|
},
|
|
.callback = urtw_bulk_tx_callback,
|
|
.timeout = URTW_DATA_TIMEOUT
|
|
},
|
|
};
|
|
|
|
static struct ieee80211vap *urtw_vap_create(struct ieee80211com *,
|
|
const char [IFNAMSIZ], int, enum ieee80211_opmode,
|
|
int, const uint8_t [IEEE80211_ADDR_LEN],
|
|
const uint8_t [IEEE80211_ADDR_LEN]);
|
|
static void urtw_vap_delete(struct ieee80211vap *);
|
|
static void urtw_init(struct urtw_softc *);
|
|
static void urtw_stop(struct urtw_softc *);
|
|
static void urtw_parent(struct ieee80211com *);
|
|
static int urtw_transmit(struct ieee80211com *, struct mbuf *);
|
|
static void urtw_start(struct urtw_softc *);
|
|
static int urtw_alloc_rx_data_list(struct urtw_softc *);
|
|
static int urtw_alloc_tx_data_list(struct urtw_softc *);
|
|
static int urtw_raw_xmit(struct ieee80211_node *, struct mbuf *,
|
|
const struct ieee80211_bpf_params *);
|
|
static void urtw_scan_start(struct ieee80211com *);
|
|
static void urtw_scan_end(struct ieee80211com *);
|
|
static void urtw_getradiocaps(struct ieee80211com *, int, int *,
|
|
struct ieee80211_channel[]);
|
|
static void urtw_set_channel(struct ieee80211com *);
|
|
static void urtw_update_mcast(struct ieee80211com *);
|
|
static int urtw_tx_start(struct urtw_softc *,
|
|
struct ieee80211_node *, struct mbuf *,
|
|
struct urtw_data *, int);
|
|
static int urtw_newstate(struct ieee80211vap *,
|
|
enum ieee80211_state, int);
|
|
static void urtw_led_ch(void *);
|
|
static void urtw_ledtask(void *, int);
|
|
static void urtw_watchdog(void *);
|
|
static void urtw_set_multi(void *);
|
|
static int urtw_isbmode(uint16_t);
|
|
static uint16_t urtw_rate2rtl(uint32_t);
|
|
static uint16_t urtw_rtl2rate(uint32_t);
|
|
static usb_error_t urtw_set_rate(struct urtw_softc *);
|
|
static usb_error_t urtw_update_msr(struct urtw_softc *);
|
|
static usb_error_t urtw_read8_c(struct urtw_softc *, int, uint8_t *);
|
|
static usb_error_t urtw_read16_c(struct urtw_softc *, int, uint16_t *);
|
|
static usb_error_t urtw_read32_c(struct urtw_softc *, int, uint32_t *);
|
|
static usb_error_t urtw_write8_c(struct urtw_softc *, int, uint8_t);
|
|
static usb_error_t urtw_write16_c(struct urtw_softc *, int, uint16_t);
|
|
static usb_error_t urtw_write32_c(struct urtw_softc *, int, uint32_t);
|
|
static usb_error_t urtw_eprom_cs(struct urtw_softc *, int);
|
|
static usb_error_t urtw_eprom_ck(struct urtw_softc *);
|
|
static usb_error_t urtw_eprom_sendbits(struct urtw_softc *, int16_t *,
|
|
int);
|
|
static usb_error_t urtw_eprom_read32(struct urtw_softc *, uint32_t,
|
|
uint32_t *);
|
|
static usb_error_t urtw_eprom_readbit(struct urtw_softc *, int16_t *);
|
|
static usb_error_t urtw_eprom_writebit(struct urtw_softc *, int16_t);
|
|
static usb_error_t urtw_get_macaddr(struct urtw_softc *);
|
|
static usb_error_t urtw_get_txpwr(struct urtw_softc *);
|
|
static usb_error_t urtw_get_rfchip(struct urtw_softc *);
|
|
static usb_error_t urtw_led_init(struct urtw_softc *);
|
|
static usb_error_t urtw_8185_rf_pins_enable(struct urtw_softc *);
|
|
static usb_error_t urtw_8185_tx_antenna(struct urtw_softc *, uint8_t);
|
|
static usb_error_t urtw_8187_write_phy(struct urtw_softc *, uint8_t,
|
|
uint32_t);
|
|
static usb_error_t urtw_8187_write_phy_ofdm_c(struct urtw_softc *,
|
|
uint8_t, uint32_t);
|
|
static usb_error_t urtw_8187_write_phy_cck_c(struct urtw_softc *, uint8_t,
|
|
uint32_t);
|
|
static usb_error_t urtw_8225_setgain(struct urtw_softc *, int16_t);
|
|
static usb_error_t urtw_8225_usb_init(struct urtw_softc *);
|
|
static usb_error_t urtw_8225_write_c(struct urtw_softc *, uint8_t,
|
|
uint16_t);
|
|
static usb_error_t urtw_8225_write_s16(struct urtw_softc *, uint8_t, int,
|
|
uint16_t *);
|
|
static usb_error_t urtw_8225_read(struct urtw_softc *, uint8_t,
|
|
uint32_t *);
|
|
static usb_error_t urtw_8225_rf_init(struct urtw_softc *);
|
|
static usb_error_t urtw_8225_rf_set_chan(struct urtw_softc *, int);
|
|
static usb_error_t urtw_8225_rf_set_sens(struct urtw_softc *, int);
|
|
static usb_error_t urtw_8225_set_txpwrlvl(struct urtw_softc *, int);
|
|
static usb_error_t urtw_8225_rf_stop(struct urtw_softc *);
|
|
static usb_error_t urtw_8225v2_rf_init(struct urtw_softc *);
|
|
static usb_error_t urtw_8225v2_rf_set_chan(struct urtw_softc *, int);
|
|
static usb_error_t urtw_8225v2_set_txpwrlvl(struct urtw_softc *, int);
|
|
static usb_error_t urtw_8225v2_setgain(struct urtw_softc *, int16_t);
|
|
static usb_error_t urtw_8225_isv2(struct urtw_softc *, int *);
|
|
static usb_error_t urtw_8225v2b_rf_init(struct urtw_softc *);
|
|
static usb_error_t urtw_8225v2b_rf_set_chan(struct urtw_softc *, int);
|
|
static usb_error_t urtw_read8e(struct urtw_softc *, int, uint8_t *);
|
|
static usb_error_t urtw_write8e(struct urtw_softc *, int, uint8_t);
|
|
static usb_error_t urtw_8180_set_anaparam(struct urtw_softc *, uint32_t);
|
|
static usb_error_t urtw_8185_set_anaparam2(struct urtw_softc *, uint32_t);
|
|
static usb_error_t urtw_intr_enable(struct urtw_softc *);
|
|
static usb_error_t urtw_intr_disable(struct urtw_softc *);
|
|
static usb_error_t urtw_reset(struct urtw_softc *);
|
|
static usb_error_t urtw_led_on(struct urtw_softc *, int);
|
|
static usb_error_t urtw_led_ctl(struct urtw_softc *, int);
|
|
static usb_error_t urtw_led_blink(struct urtw_softc *);
|
|
static usb_error_t urtw_led_mode0(struct urtw_softc *, int);
|
|
static usb_error_t urtw_led_mode1(struct urtw_softc *, int);
|
|
static usb_error_t urtw_led_mode2(struct urtw_softc *, int);
|
|
static usb_error_t urtw_led_mode3(struct urtw_softc *, int);
|
|
static usb_error_t urtw_rx_setconf(struct urtw_softc *);
|
|
static usb_error_t urtw_rx_enable(struct urtw_softc *);
|
|
static usb_error_t urtw_tx_enable(struct urtw_softc *sc);
|
|
static void urtw_free_tx_data_list(struct urtw_softc *);
|
|
static void urtw_free_rx_data_list(struct urtw_softc *);
|
|
static void urtw_free_data_list(struct urtw_softc *,
|
|
struct urtw_data data[], int, int);
|
|
static usb_error_t urtw_adapter_start(struct urtw_softc *);
|
|
static usb_error_t urtw_adapter_start_b(struct urtw_softc *);
|
|
static usb_error_t urtw_set_mode(struct urtw_softc *, uint32_t);
|
|
static usb_error_t urtw_8187b_cmd_reset(struct urtw_softc *);
|
|
static usb_error_t urtw_do_request(struct urtw_softc *,
|
|
struct usb_device_request *, void *);
|
|
static usb_error_t urtw_8225v2b_set_txpwrlvl(struct urtw_softc *, int);
|
|
static usb_error_t urtw_led_off(struct urtw_softc *, int);
|
|
static void urtw_abort_xfers(struct urtw_softc *);
|
|
static struct urtw_data *
|
|
urtw_getbuf(struct urtw_softc *sc);
|
|
static int urtw_compute_txtime(uint16_t, uint16_t, uint8_t,
|
|
uint8_t);
|
|
static void urtw_updateslot(struct ieee80211com *);
|
|
static void urtw_updateslottask(void *, int);
|
|
static void urtw_sysctl_node(struct urtw_softc *);
|
|
|
|
static int
|
|
urtw_match(device_t dev)
|
|
{
|
|
struct usb_attach_arg *uaa = device_get_ivars(dev);
|
|
|
|
if (uaa->usb_mode != USB_MODE_HOST)
|
|
return (ENXIO);
|
|
if (uaa->info.bConfigIndex != URTW_CONFIG_INDEX)
|
|
return (ENXIO);
|
|
if (uaa->info.bIfaceIndex != URTW_IFACE_INDEX)
|
|
return (ENXIO);
|
|
|
|
return (usbd_lookup_id_by_uaa(urtw_devs, sizeof(urtw_devs), uaa));
|
|
}
|
|
|
|
static int
|
|
urtw_attach(device_t dev)
|
|
{
|
|
const struct usb_config *setup_start;
|
|
int ret = ENXIO;
|
|
struct urtw_softc *sc = device_get_softc(dev);
|
|
struct usb_attach_arg *uaa = device_get_ivars(dev);
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
uint8_t iface_index = URTW_IFACE_INDEX; /* XXX */
|
|
uint16_t n_setup;
|
|
uint32_t data;
|
|
usb_error_t error;
|
|
|
|
device_set_usb_desc(dev);
|
|
|
|
sc->sc_dev = dev;
|
|
sc->sc_udev = uaa->device;
|
|
if (USB_GET_DRIVER_INFO(uaa) == URTW_REV_RTL8187B)
|
|
sc->sc_flags |= URTW_RTL8187B;
|
|
#ifdef URTW_DEBUG
|
|
sc->sc_debug = urtw_debug;
|
|
#endif
|
|
|
|
mtx_init(&sc->sc_mtx, device_get_nameunit(sc->sc_dev), MTX_NETWORK_LOCK,
|
|
MTX_DEF);
|
|
usb_callout_init_mtx(&sc->sc_led_ch, &sc->sc_mtx, 0);
|
|
TASK_INIT(&sc->sc_led_task, 0, urtw_ledtask, sc);
|
|
TASK_INIT(&sc->sc_updateslot_task, 0, urtw_updateslottask, sc);
|
|
callout_init(&sc->sc_watchdog_ch, 0);
|
|
mbufq_init(&sc->sc_snd, ifqmaxlen);
|
|
|
|
if (sc->sc_flags & URTW_RTL8187B) {
|
|
setup_start = urtw_8187b_usbconfig;
|
|
n_setup = URTW_8187B_N_XFERS;
|
|
} else {
|
|
setup_start = urtw_8187l_usbconfig;
|
|
n_setup = URTW_8187L_N_XFERS;
|
|
}
|
|
|
|
error = usbd_transfer_setup(uaa->device, &iface_index, sc->sc_xfer,
|
|
setup_start, n_setup, sc, &sc->sc_mtx);
|
|
if (error) {
|
|
device_printf(dev, "could not allocate USB transfers, "
|
|
"err=%s\n", usbd_errstr(error));
|
|
ret = ENXIO;
|
|
goto fail0;
|
|
}
|
|
|
|
if (sc->sc_flags & URTW_RTL8187B) {
|
|
sc->sc_tx_dma_buf =
|
|
usbd_xfer_get_frame_buffer(sc->sc_xfer[
|
|
URTW_8187B_BULK_TX_BE], 0);
|
|
} else {
|
|
sc->sc_tx_dma_buf =
|
|
usbd_xfer_get_frame_buffer(sc->sc_xfer[
|
|
URTW_8187L_BULK_TX_LOW], 0);
|
|
}
|
|
|
|
URTW_LOCK(sc);
|
|
|
|
urtw_read32_m(sc, URTW_RX, &data);
|
|
sc->sc_epromtype = (data & URTW_RX_9356SEL) ? URTW_EEPROM_93C56 :
|
|
URTW_EEPROM_93C46;
|
|
|
|
error = urtw_get_rfchip(sc);
|
|
if (error != 0)
|
|
goto fail;
|
|
error = urtw_get_macaddr(sc);
|
|
if (error != 0)
|
|
goto fail;
|
|
error = urtw_get_txpwr(sc);
|
|
if (error != 0)
|
|
goto fail;
|
|
error = urtw_led_init(sc);
|
|
if (error != 0)
|
|
goto fail;
|
|
|
|
URTW_UNLOCK(sc);
|
|
|
|
sc->sc_rts_retry = URTW_DEFAULT_RTS_RETRY;
|
|
sc->sc_tx_retry = URTW_DEFAULT_TX_RETRY;
|
|
sc->sc_currate = 3;
|
|
sc->sc_preamble_mode = urtw_preamble_mode;
|
|
|
|
ic->ic_softc = sc;
|
|
ic->ic_name = device_get_nameunit(dev);
|
|
ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */
|
|
ic->ic_opmode = IEEE80211_M_STA; /* default to BSS mode */
|
|
|
|
/* set device capabilities */
|
|
ic->ic_caps =
|
|
IEEE80211_C_STA | /* station mode */
|
|
IEEE80211_C_MONITOR | /* monitor mode supported */
|
|
IEEE80211_C_TXPMGT | /* tx power management */
|
|
IEEE80211_C_SHPREAMBLE | /* short preamble supported */
|
|
IEEE80211_C_SHSLOT | /* short slot time supported */
|
|
IEEE80211_C_BGSCAN | /* capable of bg scanning */
|
|
IEEE80211_C_WPA; /* 802.11i */
|
|
|
|
/* XXX TODO: setup regdomain if URTW_EPROM_CHANPLAN_BY_HW bit is set.*/
|
|
|
|
urtw_getradiocaps(ic, IEEE80211_CHAN_MAX, &ic->ic_nchans,
|
|
ic->ic_channels);
|
|
|
|
ieee80211_ifattach(ic);
|
|
ic->ic_raw_xmit = urtw_raw_xmit;
|
|
ic->ic_scan_start = urtw_scan_start;
|
|
ic->ic_scan_end = urtw_scan_end;
|
|
ic->ic_getradiocaps = urtw_getradiocaps;
|
|
ic->ic_set_channel = urtw_set_channel;
|
|
ic->ic_updateslot = urtw_updateslot;
|
|
ic->ic_vap_create = urtw_vap_create;
|
|
ic->ic_vap_delete = urtw_vap_delete;
|
|
ic->ic_update_mcast = urtw_update_mcast;
|
|
ic->ic_parent = urtw_parent;
|
|
ic->ic_transmit = urtw_transmit;
|
|
|
|
ieee80211_radiotap_attach(ic,
|
|
&sc->sc_txtap.wt_ihdr, sizeof(sc->sc_txtap),
|
|
URTW_TX_RADIOTAP_PRESENT,
|
|
&sc->sc_rxtap.wr_ihdr, sizeof(sc->sc_rxtap),
|
|
URTW_RX_RADIOTAP_PRESENT);
|
|
|
|
urtw_sysctl_node(sc);
|
|
|
|
if (bootverbose)
|
|
ieee80211_announce(ic);
|
|
return (0);
|
|
|
|
fail:
|
|
URTW_UNLOCK(sc);
|
|
usbd_transfer_unsetup(sc->sc_xfer, (sc->sc_flags & URTW_RTL8187B) ?
|
|
URTW_8187B_N_XFERS : URTW_8187L_N_XFERS);
|
|
fail0:
|
|
return (ret);
|
|
}
|
|
|
|
static int
|
|
urtw_detach(device_t dev)
|
|
{
|
|
struct urtw_softc *sc = device_get_softc(dev);
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
unsigned int x;
|
|
unsigned int n_xfers;
|
|
|
|
/* Prevent further ioctls */
|
|
URTW_LOCK(sc);
|
|
sc->sc_flags |= URTW_DETACHED;
|
|
urtw_stop(sc);
|
|
URTW_UNLOCK(sc);
|
|
|
|
ieee80211_draintask(ic, &sc->sc_updateslot_task);
|
|
ieee80211_draintask(ic, &sc->sc_led_task);
|
|
|
|
usb_callout_drain(&sc->sc_led_ch);
|
|
callout_drain(&sc->sc_watchdog_ch);
|
|
|
|
n_xfers = (sc->sc_flags & URTW_RTL8187B) ?
|
|
URTW_8187B_N_XFERS : URTW_8187L_N_XFERS;
|
|
|
|
/* prevent further allocations from RX/TX data lists */
|
|
URTW_LOCK(sc);
|
|
STAILQ_INIT(&sc->sc_tx_active);
|
|
STAILQ_INIT(&sc->sc_tx_inactive);
|
|
STAILQ_INIT(&sc->sc_tx_pending);
|
|
|
|
STAILQ_INIT(&sc->sc_rx_active);
|
|
STAILQ_INIT(&sc->sc_rx_inactive);
|
|
URTW_UNLOCK(sc);
|
|
|
|
/* drain USB transfers */
|
|
for (x = 0; x != n_xfers; x++)
|
|
usbd_transfer_drain(sc->sc_xfer[x]);
|
|
|
|
/* free data buffers */
|
|
URTW_LOCK(sc);
|
|
urtw_free_tx_data_list(sc);
|
|
urtw_free_rx_data_list(sc);
|
|
URTW_UNLOCK(sc);
|
|
|
|
/* free USB transfers and some data buffers */
|
|
usbd_transfer_unsetup(sc->sc_xfer, n_xfers);
|
|
|
|
ieee80211_ifdetach(ic);
|
|
mbufq_drain(&sc->sc_snd);
|
|
mtx_destroy(&sc->sc_mtx);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
urtw_free_tx_data_list(struct urtw_softc *sc)
|
|
{
|
|
urtw_free_data_list(sc, sc->sc_tx, URTW_TX_DATA_LIST_COUNT, 0);
|
|
}
|
|
|
|
static void
|
|
urtw_free_rx_data_list(struct urtw_softc *sc)
|
|
{
|
|
urtw_free_data_list(sc, sc->sc_rx, URTW_RX_DATA_LIST_COUNT, 1);
|
|
}
|
|
|
|
static void
|
|
urtw_free_data_list(struct urtw_softc *sc, struct urtw_data data[], int ndata,
|
|
int fillmbuf)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ndata; i++) {
|
|
struct urtw_data *dp = &data[i];
|
|
|
|
if (fillmbuf == 1) {
|
|
if (dp->m != NULL) {
|
|
m_freem(dp->m);
|
|
dp->m = NULL;
|
|
dp->buf = NULL;
|
|
}
|
|
} else {
|
|
dp->buf = NULL;
|
|
}
|
|
if (dp->ni != NULL) {
|
|
ieee80211_free_node(dp->ni);
|
|
dp->ni = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
static struct ieee80211vap *
|
|
urtw_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit,
|
|
enum ieee80211_opmode opmode, int flags,
|
|
const uint8_t bssid[IEEE80211_ADDR_LEN],
|
|
const uint8_t mac[IEEE80211_ADDR_LEN])
|
|
{
|
|
struct urtw_vap *uvp;
|
|
struct ieee80211vap *vap;
|
|
|
|
if (!TAILQ_EMPTY(&ic->ic_vaps)) /* only one at a time */
|
|
return (NULL);
|
|
uvp = malloc(sizeof(struct urtw_vap), M_80211_VAP, M_WAITOK | M_ZERO);
|
|
vap = &uvp->vap;
|
|
/* enable s/w bmiss handling for sta mode */
|
|
|
|
if (ieee80211_vap_setup(ic, vap, name, unit, opmode,
|
|
flags | IEEE80211_CLONE_NOBEACONS, bssid) != 0) {
|
|
/* out of memory */
|
|
free(uvp, M_80211_VAP);
|
|
return (NULL);
|
|
}
|
|
|
|
/* override state transition machine */
|
|
uvp->newstate = vap->iv_newstate;
|
|
vap->iv_newstate = urtw_newstate;
|
|
|
|
/* complete setup */
|
|
ieee80211_vap_attach(vap, ieee80211_media_change,
|
|
ieee80211_media_status, mac);
|
|
ic->ic_opmode = opmode;
|
|
return (vap);
|
|
}
|
|
|
|
static void
|
|
urtw_vap_delete(struct ieee80211vap *vap)
|
|
{
|
|
struct urtw_vap *uvp = URTW_VAP(vap);
|
|
|
|
ieee80211_vap_detach(vap);
|
|
free(uvp, M_80211_VAP);
|
|
}
|
|
|
|
static void
|
|
urtw_init(struct urtw_softc *sc)
|
|
{
|
|
usb_error_t error;
|
|
int ret;
|
|
|
|
URTW_ASSERT_LOCKED(sc);
|
|
|
|
if (sc->sc_flags & URTW_RUNNING)
|
|
urtw_stop(sc);
|
|
|
|
error = (sc->sc_flags & URTW_RTL8187B) ? urtw_adapter_start_b(sc) :
|
|
urtw_adapter_start(sc);
|
|
if (error != 0)
|
|
goto fail;
|
|
|
|
/* reset softc variables */
|
|
sc->sc_txtimer = 0;
|
|
|
|
if (!(sc->sc_flags & URTW_INIT_ONCE)) {
|
|
ret = urtw_alloc_rx_data_list(sc);
|
|
if (ret != 0)
|
|
goto fail;
|
|
ret = urtw_alloc_tx_data_list(sc);
|
|
if (ret != 0)
|
|
goto fail;
|
|
sc->sc_flags |= URTW_INIT_ONCE;
|
|
}
|
|
|
|
error = urtw_rx_enable(sc);
|
|
if (error != 0)
|
|
goto fail;
|
|
error = urtw_tx_enable(sc);
|
|
if (error != 0)
|
|
goto fail;
|
|
|
|
if (sc->sc_flags & URTW_RTL8187B)
|
|
usbd_transfer_start(sc->sc_xfer[URTW_8187B_BULK_TX_STATUS]);
|
|
|
|
sc->sc_flags |= URTW_RUNNING;
|
|
|
|
callout_reset(&sc->sc_watchdog_ch, hz, urtw_watchdog, sc);
|
|
fail:
|
|
return;
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_adapter_start_b(struct urtw_softc *sc)
|
|
{
|
|
uint8_t data8;
|
|
usb_error_t error;
|
|
|
|
error = urtw_set_mode(sc, URTW_EPROM_CMD_CONFIG);
|
|
if (error)
|
|
goto fail;
|
|
|
|
urtw_read8_m(sc, URTW_CONFIG3, &data8);
|
|
urtw_write8_m(sc, URTW_CONFIG3,
|
|
data8 | URTW_CONFIG3_ANAPARAM_WRITE | URTW_CONFIG3_GNT_SELECT);
|
|
urtw_write32_m(sc, URTW_ANAPARAM2, URTW_8187B_8225_ANAPARAM2_ON);
|
|
urtw_write32_m(sc, URTW_ANAPARAM, URTW_8187B_8225_ANAPARAM_ON);
|
|
urtw_write8_m(sc, URTW_ANAPARAM3, URTW_8187B_8225_ANAPARAM3_ON);
|
|
|
|
urtw_write8_m(sc, 0x61, 0x10);
|
|
urtw_read8_m(sc, 0x62, &data8);
|
|
urtw_write8_m(sc, 0x62, data8 & ~(1 << 5));
|
|
urtw_write8_m(sc, 0x62, data8 | (1 << 5));
|
|
|
|
urtw_read8_m(sc, URTW_CONFIG3, &data8);
|
|
data8 &= ~URTW_CONFIG3_ANAPARAM_WRITE;
|
|
urtw_write8_m(sc, URTW_CONFIG3, data8);
|
|
|
|
error = urtw_set_mode(sc, URTW_EPROM_CMD_NORMAL);
|
|
if (error)
|
|
goto fail;
|
|
|
|
error = urtw_8187b_cmd_reset(sc);
|
|
if (error)
|
|
goto fail;
|
|
|
|
error = sc->sc_rf_init(sc);
|
|
if (error != 0)
|
|
goto fail;
|
|
urtw_write8_m(sc, URTW_CMD, URTW_CMD_RX_ENABLE | URTW_CMD_TX_ENABLE);
|
|
|
|
/* fix RTL8187B RX stall */
|
|
error = urtw_intr_enable(sc);
|
|
if (error)
|
|
goto fail;
|
|
|
|
error = urtw_write8e(sc, 0x41, 0xf4);
|
|
if (error)
|
|
goto fail;
|
|
error = urtw_write8e(sc, 0x40, 0x00);
|
|
if (error)
|
|
goto fail;
|
|
error = urtw_write8e(sc, 0x42, 0x00);
|
|
if (error)
|
|
goto fail;
|
|
error = urtw_write8e(sc, 0x42, 0x01);
|
|
if (error)
|
|
goto fail;
|
|
error = urtw_write8e(sc, 0x40, 0x0f);
|
|
if (error)
|
|
goto fail;
|
|
error = urtw_write8e(sc, 0x42, 0x00);
|
|
if (error)
|
|
goto fail;
|
|
error = urtw_write8e(sc, 0x42, 0x01);
|
|
if (error)
|
|
goto fail;
|
|
|
|
urtw_read8_m(sc, 0xdb, &data8);
|
|
urtw_write8_m(sc, 0xdb, data8 | (1 << 2));
|
|
urtw_write16_m(sc, 0x372, 0x59fa);
|
|
urtw_write16_m(sc, 0x374, 0x59d2);
|
|
urtw_write16_m(sc, 0x376, 0x59d2);
|
|
urtw_write16_m(sc, 0x378, 0x19fa);
|
|
urtw_write16_m(sc, 0x37a, 0x19fa);
|
|
urtw_write16_m(sc, 0x37c, 0x00d0);
|
|
urtw_write8_m(sc, 0x61, 0);
|
|
|
|
urtw_write8_m(sc, 0x180, 0x0f);
|
|
urtw_write8_m(sc, 0x183, 0x03);
|
|
urtw_write8_m(sc, 0xda, 0x10);
|
|
urtw_write8_m(sc, 0x24d, 0x08);
|
|
urtw_write32_m(sc, URTW_HSSI_PARA, 0x0600321b);
|
|
|
|
urtw_write16_m(sc, 0x1ec, 0x800); /* RX MAX SIZE */
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_adapter_start(struct urtw_softc *sc)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
usb_error_t error;
|
|
|
|
error = urtw_reset(sc);
|
|
if (error)
|
|
goto fail;
|
|
|
|
urtw_write8_m(sc, URTW_ADDR_MAGIC1, 0);
|
|
urtw_write8_m(sc, URTW_GPIO, 0);
|
|
|
|
/* for led */
|
|
urtw_write8_m(sc, URTW_ADDR_MAGIC1, 4);
|
|
error = urtw_led_ctl(sc, URTW_LED_CTL_POWER_ON);
|
|
if (error != 0)
|
|
goto fail;
|
|
|
|
error = urtw_set_mode(sc, URTW_EPROM_CMD_CONFIG);
|
|
if (error)
|
|
goto fail;
|
|
/* applying MAC address again. */
|
|
urtw_write32_m(sc, URTW_MAC0, ((uint32_t *)ic->ic_macaddr)[0]);
|
|
urtw_write16_m(sc, URTW_MAC4, ((uint32_t *)ic->ic_macaddr)[1] & 0xffff);
|
|
error = urtw_set_mode(sc, URTW_EPROM_CMD_NORMAL);
|
|
if (error)
|
|
goto fail;
|
|
|
|
error = urtw_update_msr(sc);
|
|
if (error)
|
|
goto fail;
|
|
|
|
urtw_write32_m(sc, URTW_INT_TIMEOUT, 0);
|
|
urtw_write8_m(sc, URTW_WPA_CONFIG, 0);
|
|
urtw_write8_m(sc, URTW_RATE_FALLBACK, URTW_RATE_FALLBACK_ENABLE | 0x1);
|
|
error = urtw_set_rate(sc);
|
|
if (error != 0)
|
|
goto fail;
|
|
|
|
error = sc->sc_rf_init(sc);
|
|
if (error != 0)
|
|
goto fail;
|
|
if (sc->sc_rf_set_sens != NULL)
|
|
sc->sc_rf_set_sens(sc, sc->sc_sens);
|
|
|
|
/* XXX correct? to call write16 */
|
|
urtw_write16_m(sc, URTW_PSR, 1);
|
|
urtw_write16_m(sc, URTW_ADDR_MAGIC2, 0x10);
|
|
urtw_write8_m(sc, URTW_TALLY_SEL, 0x80);
|
|
urtw_write8_m(sc, URTW_ADDR_MAGIC3, 0x60);
|
|
/* XXX correct? to call write16 */
|
|
urtw_write16_m(sc, URTW_PSR, 0);
|
|
urtw_write8_m(sc, URTW_ADDR_MAGIC1, 4);
|
|
|
|
error = urtw_intr_enable(sc);
|
|
if (error != 0)
|
|
goto fail;
|
|
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_set_mode(struct urtw_softc *sc, uint32_t mode)
|
|
{
|
|
uint8_t data;
|
|
usb_error_t error;
|
|
|
|
urtw_read8_m(sc, URTW_EPROM_CMD, &data);
|
|
data = (data & ~URTW_EPROM_CMD_MASK) | (mode << URTW_EPROM_CMD_SHIFT);
|
|
data = data & ~(URTW_EPROM_CS | URTW_EPROM_CK);
|
|
urtw_write8_m(sc, URTW_EPROM_CMD, data);
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_8187b_cmd_reset(struct urtw_softc *sc)
|
|
{
|
|
int i;
|
|
uint8_t data8;
|
|
usb_error_t error;
|
|
|
|
/* XXX the code can be duplicate with urtw_reset(). */
|
|
urtw_read8_m(sc, URTW_CMD, &data8);
|
|
data8 = (data8 & 0x2) | URTW_CMD_RST;
|
|
urtw_write8_m(sc, URTW_CMD, data8);
|
|
|
|
for (i = 0; i < 20; i++) {
|
|
usb_pause_mtx(&sc->sc_mtx, 2);
|
|
urtw_read8_m(sc, URTW_CMD, &data8);
|
|
if (!(data8 & URTW_CMD_RST))
|
|
break;
|
|
}
|
|
if (i >= 20) {
|
|
device_printf(sc->sc_dev, "reset timeout\n");
|
|
goto fail;
|
|
}
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_do_request(struct urtw_softc *sc,
|
|
struct usb_device_request *req, void *data)
|
|
{
|
|
usb_error_t err;
|
|
int ntries = 10;
|
|
|
|
URTW_ASSERT_LOCKED(sc);
|
|
|
|
while (ntries--) {
|
|
err = usbd_do_request_flags(sc->sc_udev, &sc->sc_mtx,
|
|
req, data, 0, NULL, 250 /* ms */);
|
|
if (err == 0)
|
|
break;
|
|
|
|
DPRINTF(sc, URTW_DEBUG_INIT,
|
|
"Control request failed, %s (retrying)\n",
|
|
usbd_errstr(err));
|
|
usb_pause_mtx(&sc->sc_mtx, hz / 100);
|
|
}
|
|
return (err);
|
|
}
|
|
|
|
static void
|
|
urtw_stop(struct urtw_softc *sc)
|
|
{
|
|
uint8_t data8;
|
|
usb_error_t error;
|
|
|
|
URTW_ASSERT_LOCKED(sc);
|
|
|
|
sc->sc_flags &= ~URTW_RUNNING;
|
|
|
|
error = urtw_intr_disable(sc);
|
|
if (error)
|
|
goto fail;
|
|
urtw_read8_m(sc, URTW_CMD, &data8);
|
|
data8 &= ~(URTW_CMD_RX_ENABLE | URTW_CMD_TX_ENABLE);
|
|
urtw_write8_m(sc, URTW_CMD, data8);
|
|
|
|
error = sc->sc_rf_stop(sc);
|
|
if (error != 0)
|
|
goto fail;
|
|
|
|
error = urtw_set_mode(sc, URTW_EPROM_CMD_CONFIG);
|
|
if (error)
|
|
goto fail;
|
|
urtw_read8_m(sc, URTW_CONFIG4, &data8);
|
|
urtw_write8_m(sc, URTW_CONFIG4, data8 | URTW_CONFIG4_VCOOFF);
|
|
error = urtw_set_mode(sc, URTW_EPROM_CMD_NORMAL);
|
|
if (error)
|
|
goto fail;
|
|
fail:
|
|
if (error)
|
|
device_printf(sc->sc_dev, "failed to stop (%s)\n",
|
|
usbd_errstr(error));
|
|
|
|
usb_callout_stop(&sc->sc_led_ch);
|
|
callout_stop(&sc->sc_watchdog_ch);
|
|
|
|
urtw_abort_xfers(sc);
|
|
}
|
|
|
|
static void
|
|
urtw_abort_xfers(struct urtw_softc *sc)
|
|
{
|
|
int i, max;
|
|
|
|
URTW_ASSERT_LOCKED(sc);
|
|
|
|
max = (sc->sc_flags & URTW_RTL8187B) ? URTW_8187B_N_XFERS :
|
|
URTW_8187L_N_XFERS;
|
|
|
|
/* abort any pending transfers */
|
|
for (i = 0; i < max; i++)
|
|
usbd_transfer_stop(sc->sc_xfer[i]);
|
|
}
|
|
|
|
static void
|
|
urtw_parent(struct ieee80211com *ic)
|
|
{
|
|
struct urtw_softc *sc = ic->ic_softc;
|
|
int startall = 0;
|
|
|
|
URTW_LOCK(sc);
|
|
if (sc->sc_flags & URTW_DETACHED) {
|
|
URTW_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
if (ic->ic_nrunning > 0) {
|
|
if (sc->sc_flags & URTW_RUNNING) {
|
|
if (ic->ic_promisc > 0 || ic->ic_allmulti > 0)
|
|
urtw_set_multi(sc);
|
|
} else {
|
|
urtw_init(sc);
|
|
startall = 1;
|
|
}
|
|
} else if (sc->sc_flags & URTW_RUNNING)
|
|
urtw_stop(sc);
|
|
URTW_UNLOCK(sc);
|
|
if (startall)
|
|
ieee80211_start_all(ic);
|
|
}
|
|
|
|
static int
|
|
urtw_transmit(struct ieee80211com *ic, struct mbuf *m)
|
|
{
|
|
struct urtw_softc *sc = ic->ic_softc;
|
|
int error;
|
|
|
|
URTW_LOCK(sc);
|
|
if ((sc->sc_flags & URTW_RUNNING) == 0) {
|
|
URTW_UNLOCK(sc);
|
|
return (ENXIO);
|
|
}
|
|
error = mbufq_enqueue(&sc->sc_snd, m);
|
|
if (error) {
|
|
URTW_UNLOCK(sc);
|
|
return (error);
|
|
}
|
|
urtw_start(sc);
|
|
URTW_UNLOCK(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
urtw_start(struct urtw_softc *sc)
|
|
{
|
|
struct urtw_data *bf;
|
|
struct ieee80211_node *ni;
|
|
struct mbuf *m;
|
|
|
|
URTW_ASSERT_LOCKED(sc);
|
|
|
|
if ((sc->sc_flags & URTW_RUNNING) == 0)
|
|
return;
|
|
|
|
while ((m = mbufq_dequeue(&sc->sc_snd)) != NULL) {
|
|
bf = urtw_getbuf(sc);
|
|
if (bf == NULL) {
|
|
mbufq_prepend(&sc->sc_snd, m);
|
|
break;
|
|
}
|
|
|
|
ni = (struct ieee80211_node *)m->m_pkthdr.rcvif;
|
|
m->m_pkthdr.rcvif = NULL;
|
|
|
|
if (urtw_tx_start(sc, ni, m, bf, URTW_PRIORITY_NORMAL) != 0) {
|
|
if_inc_counter(ni->ni_vap->iv_ifp,
|
|
IFCOUNTER_OERRORS, 1);
|
|
STAILQ_INSERT_HEAD(&sc->sc_tx_inactive, bf, next);
|
|
ieee80211_free_node(ni);
|
|
break;
|
|
}
|
|
|
|
sc->sc_txtimer = 5;
|
|
callout_reset(&sc->sc_watchdog_ch, hz, urtw_watchdog, sc);
|
|
}
|
|
}
|
|
|
|
static int
|
|
urtw_alloc_data_list(struct urtw_softc *sc, struct urtw_data data[],
|
|
int ndata, int maxsz, void *dma_buf)
|
|
{
|
|
int i, error;
|
|
|
|
for (i = 0; i < ndata; i++) {
|
|
struct urtw_data *dp = &data[i];
|
|
|
|
dp->sc = sc;
|
|
if (dma_buf == NULL) {
|
|
dp->m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR);
|
|
if (dp->m == NULL) {
|
|
device_printf(sc->sc_dev,
|
|
"could not allocate rx mbuf\n");
|
|
error = ENOMEM;
|
|
goto fail;
|
|
}
|
|
dp->buf = mtod(dp->m, uint8_t *);
|
|
} else {
|
|
dp->m = NULL;
|
|
dp->buf = ((uint8_t *)dma_buf) +
|
|
(i * maxsz);
|
|
}
|
|
dp->ni = NULL;
|
|
}
|
|
return (0);
|
|
|
|
fail: urtw_free_data_list(sc, data, ndata, 1);
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
urtw_alloc_rx_data_list(struct urtw_softc *sc)
|
|
{
|
|
int error, i;
|
|
|
|
error = urtw_alloc_data_list(sc,
|
|
sc->sc_rx, URTW_RX_DATA_LIST_COUNT,
|
|
MCLBYTES, NULL /* mbufs */);
|
|
if (error != 0)
|
|
return (error);
|
|
|
|
STAILQ_INIT(&sc->sc_rx_active);
|
|
STAILQ_INIT(&sc->sc_rx_inactive);
|
|
|
|
for (i = 0; i < URTW_RX_DATA_LIST_COUNT; i++)
|
|
STAILQ_INSERT_HEAD(&sc->sc_rx_inactive, &sc->sc_rx[i], next);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
urtw_alloc_tx_data_list(struct urtw_softc *sc)
|
|
{
|
|
int error, i;
|
|
|
|
error = urtw_alloc_data_list(sc,
|
|
sc->sc_tx, URTW_TX_DATA_LIST_COUNT, URTW_TX_MAXSIZE,
|
|
sc->sc_tx_dma_buf /* no mbufs */);
|
|
if (error != 0)
|
|
return (error);
|
|
|
|
STAILQ_INIT(&sc->sc_tx_active);
|
|
STAILQ_INIT(&sc->sc_tx_inactive);
|
|
STAILQ_INIT(&sc->sc_tx_pending);
|
|
|
|
for (i = 0; i < URTW_TX_DATA_LIST_COUNT; i++)
|
|
STAILQ_INSERT_HEAD(&sc->sc_tx_inactive, &sc->sc_tx[i],
|
|
next);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
urtw_raw_xmit(struct ieee80211_node *ni, struct mbuf *m,
|
|
const struct ieee80211_bpf_params *params)
|
|
{
|
|
struct ieee80211com *ic = ni->ni_ic;
|
|
struct urtw_softc *sc = ic->ic_softc;
|
|
struct urtw_data *bf;
|
|
|
|
/* prevent management frames from being sent if we're not ready */
|
|
if (!(sc->sc_flags & URTW_RUNNING)) {
|
|
m_freem(m);
|
|
return ENETDOWN;
|
|
}
|
|
URTW_LOCK(sc);
|
|
bf = urtw_getbuf(sc);
|
|
if (bf == NULL) {
|
|
m_freem(m);
|
|
URTW_UNLOCK(sc);
|
|
return (ENOBUFS); /* XXX */
|
|
}
|
|
|
|
if (urtw_tx_start(sc, ni, m, bf, URTW_PRIORITY_LOW) != 0) {
|
|
STAILQ_INSERT_HEAD(&sc->sc_tx_inactive, bf, next);
|
|
URTW_UNLOCK(sc);
|
|
return (EIO);
|
|
}
|
|
URTW_UNLOCK(sc);
|
|
|
|
sc->sc_txtimer = 5;
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
urtw_scan_start(struct ieee80211com *ic)
|
|
{
|
|
|
|
/* XXX do nothing? */
|
|
}
|
|
|
|
static void
|
|
urtw_scan_end(struct ieee80211com *ic)
|
|
{
|
|
|
|
/* XXX do nothing? */
|
|
}
|
|
|
|
static void
|
|
urtw_getradiocaps(struct ieee80211com *ic,
|
|
int maxchans, int *nchans, struct ieee80211_channel chans[])
|
|
{
|
|
uint8_t bands[IEEE80211_MODE_BYTES];
|
|
|
|
memset(bands, 0, sizeof(bands));
|
|
setbit(bands, IEEE80211_MODE_11B);
|
|
setbit(bands, IEEE80211_MODE_11G);
|
|
ieee80211_add_channel_list_2ghz(chans, maxchans, nchans,
|
|
urtw_chan_2ghz, nitems(urtw_chan_2ghz), bands, 0);
|
|
}
|
|
|
|
static void
|
|
urtw_set_channel(struct ieee80211com *ic)
|
|
{
|
|
struct urtw_softc *sc = ic->ic_softc;
|
|
uint32_t data, orig;
|
|
usb_error_t error;
|
|
|
|
/*
|
|
* if the user set a channel explicitly using ifconfig(8) this function
|
|
* can be called earlier than we're expected that in some cases the
|
|
* initialization would be failed if setting a channel is called before
|
|
* the init have done.
|
|
*/
|
|
if (!(sc->sc_flags & URTW_RUNNING))
|
|
return;
|
|
|
|
if (sc->sc_curchan != NULL && sc->sc_curchan == ic->ic_curchan)
|
|
return;
|
|
|
|
URTW_LOCK(sc);
|
|
|
|
/*
|
|
* during changing th channel we need to temporarily be disable
|
|
* TX.
|
|
*/
|
|
urtw_read32_m(sc, URTW_TX_CONF, &orig);
|
|
data = orig & ~URTW_TX_LOOPBACK_MASK;
|
|
urtw_write32_m(sc, URTW_TX_CONF, data | URTW_TX_LOOPBACK_MAC);
|
|
|
|
error = sc->sc_rf_set_chan(sc, ieee80211_chan2ieee(ic, ic->ic_curchan));
|
|
if (error != 0)
|
|
goto fail;
|
|
usb_pause_mtx(&sc->sc_mtx, 10);
|
|
urtw_write32_m(sc, URTW_TX_CONF, orig);
|
|
|
|
urtw_write16_m(sc, URTW_ATIM_WND, 2);
|
|
urtw_write16_m(sc, URTW_ATIM_TR_ITV, 100);
|
|
urtw_write16_m(sc, URTW_BEACON_INTERVAL, 100);
|
|
urtw_write16_m(sc, URTW_BEACON_INTERVAL_TIME, 100);
|
|
|
|
fail:
|
|
URTW_UNLOCK(sc);
|
|
|
|
sc->sc_curchan = ic->ic_curchan;
|
|
|
|
if (error != 0)
|
|
device_printf(sc->sc_dev, "could not change the channel\n");
|
|
}
|
|
|
|
static void
|
|
urtw_update_mcast(struct ieee80211com *ic)
|
|
{
|
|
|
|
/* XXX do nothing? */
|
|
}
|
|
|
|
static int
|
|
urtw_tx_start(struct urtw_softc *sc, struct ieee80211_node *ni, struct mbuf *m0,
|
|
struct urtw_data *data, int prior)
|
|
{
|
|
struct ieee80211_frame *wh = mtod(m0, struct ieee80211_frame *);
|
|
struct ieee80211_key *k;
|
|
const struct ieee80211_txparam *tp;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
struct usb_xfer *rtl8187b_pipes[URTW_8187B_TXPIPE_MAX] = {
|
|
sc->sc_xfer[URTW_8187B_BULK_TX_BE],
|
|
sc->sc_xfer[URTW_8187B_BULK_TX_BK],
|
|
sc->sc_xfer[URTW_8187B_BULK_TX_VI],
|
|
sc->sc_xfer[URTW_8187B_BULK_TX_VO]
|
|
};
|
|
struct usb_xfer *xfer;
|
|
int dur = 0, rtsdur = 0, rtsenable = 0, ctsenable = 0, rate,
|
|
pkttime = 0, txdur = 0, isshort = 0, xferlen;
|
|
uint16_t acktime, rtstime, ctstime;
|
|
uint32_t flags;
|
|
usb_error_t error;
|
|
|
|
URTW_ASSERT_LOCKED(sc);
|
|
|
|
/*
|
|
* Software crypto.
|
|
*/
|
|
if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) {
|
|
k = ieee80211_crypto_encap(ni, m0);
|
|
if (k == NULL) {
|
|
device_printf(sc->sc_dev,
|
|
"ieee80211_crypto_encap returns NULL.\n");
|
|
/* XXX we don't expect the fragmented frames */
|
|
m_freem(m0);
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
/* in case packet header moved, reset pointer */
|
|
wh = mtod(m0, struct ieee80211_frame *);
|
|
}
|
|
|
|
if (ieee80211_radiotap_active_vap(vap)) {
|
|
struct urtw_tx_radiotap_header *tap = &sc->sc_txtap;
|
|
|
|
/* XXX Are variables correct? */
|
|
tap->wt_flags = 0;
|
|
tap->wt_chan_freq = htole16(ic->ic_curchan->ic_freq);
|
|
tap->wt_chan_flags = htole16(ic->ic_curchan->ic_flags);
|
|
|
|
ieee80211_radiotap_tx(vap, m0);
|
|
}
|
|
|
|
if ((wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) == IEEE80211_FC0_TYPE_MGT ||
|
|
(wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) == IEEE80211_FC0_TYPE_CTL) {
|
|
tp = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)];
|
|
rate = tp->mgmtrate;
|
|
} else {
|
|
tp = &vap->iv_txparms[ieee80211_chan2mode(ni->ni_chan)];
|
|
/* for data frames */
|
|
if (IEEE80211_IS_MULTICAST(wh->i_addr1))
|
|
rate = tp->mcastrate;
|
|
else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE)
|
|
rate = tp->ucastrate;
|
|
else
|
|
rate = urtw_rtl2rate(sc->sc_currate);
|
|
}
|
|
|
|
sc->sc_stats.txrates[sc->sc_currate]++;
|
|
|
|
if (IEEE80211_IS_MULTICAST(wh->i_addr1))
|
|
txdur = pkttime = urtw_compute_txtime(m0->m_pkthdr.len +
|
|
IEEE80211_CRC_LEN, rate, 0, 0);
|
|
else {
|
|
acktime = urtw_compute_txtime(14, 2,0, 0);
|
|
if ((m0->m_pkthdr.len + 4) > vap->iv_rtsthreshold) {
|
|
rtsenable = 1;
|
|
ctsenable = 0;
|
|
rtstime = urtw_compute_txtime(URTW_ACKCTS_LEN, 2, 0, 0);
|
|
ctstime = urtw_compute_txtime(14, 2, 0, 0);
|
|
pkttime = urtw_compute_txtime(m0->m_pkthdr.len +
|
|
IEEE80211_CRC_LEN, rate, 0, isshort);
|
|
rtsdur = ctstime + pkttime + acktime +
|
|
3 * URTW_ASIFS_TIME;
|
|
txdur = rtstime + rtsdur;
|
|
} else {
|
|
rtsenable = ctsenable = rtsdur = 0;
|
|
pkttime = urtw_compute_txtime(m0->m_pkthdr.len +
|
|
IEEE80211_CRC_LEN, rate, 0, isshort);
|
|
txdur = pkttime + URTW_ASIFS_TIME + acktime;
|
|
}
|
|
|
|
if (wh->i_fc[1] & IEEE80211_FC1_MORE_FRAG)
|
|
dur = urtw_compute_txtime(m0->m_pkthdr.len +
|
|
IEEE80211_CRC_LEN, rate, 0, isshort) +
|
|
3 * URTW_ASIFS_TIME +
|
|
2 * acktime;
|
|
else
|
|
dur = URTW_ASIFS_TIME + acktime;
|
|
}
|
|
USETW(wh->i_dur, dur);
|
|
|
|
xferlen = m0->m_pkthdr.len;
|
|
xferlen += (sc->sc_flags & URTW_RTL8187B) ? (4 * 8) : (4 * 3);
|
|
if ((0 == xferlen % 64) || (0 == xferlen % 512))
|
|
xferlen += 1;
|
|
|
|
memset(data->buf, 0, URTW_TX_MAXSIZE);
|
|
flags = m0->m_pkthdr.len & 0xfff;
|
|
flags |= URTW_TX_FLAG_NO_ENC;
|
|
if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) &&
|
|
(ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_PREAMBLE) &&
|
|
(sc->sc_preamble_mode == URTW_PREAMBLE_MODE_SHORT) &&
|
|
(sc->sc_currate != 0))
|
|
flags |= URTW_TX_FLAG_SPLCP;
|
|
if (wh->i_fc[1] & IEEE80211_FC1_MORE_FRAG)
|
|
flags |= URTW_TX_FLAG_MOREFRAG;
|
|
|
|
flags |= (sc->sc_currate & 0xf) << URTW_TX_FLAG_TXRATE_SHIFT;
|
|
|
|
if (sc->sc_flags & URTW_RTL8187B) {
|
|
struct urtw_8187b_txhdr *tx;
|
|
|
|
tx = (struct urtw_8187b_txhdr *)data->buf;
|
|
if (ctsenable)
|
|
flags |= URTW_TX_FLAG_CTS;
|
|
if (rtsenable) {
|
|
flags |= URTW_TX_FLAG_RTS;
|
|
flags |= (urtw_rate2rtl(11) & 0xf) <<
|
|
URTW_TX_FLAG_RTSRATE_SHIFT;
|
|
tx->rtsdur = rtsdur;
|
|
}
|
|
tx->flag = htole32(flags);
|
|
tx->txdur = txdur;
|
|
if ((wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) ==
|
|
IEEE80211_FC0_TYPE_MGT &&
|
|
(wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) ==
|
|
IEEE80211_FC0_SUBTYPE_PROBE_RESP)
|
|
tx->retry = 1;
|
|
else
|
|
tx->retry = URTW_TX_MAXRETRY;
|
|
m_copydata(m0, 0, m0->m_pkthdr.len, (uint8_t *)(tx + 1));
|
|
} else {
|
|
struct urtw_8187l_txhdr *tx;
|
|
|
|
tx = (struct urtw_8187l_txhdr *)data->buf;
|
|
if (rtsenable) {
|
|
flags |= URTW_TX_FLAG_RTS;
|
|
tx->rtsdur = rtsdur;
|
|
}
|
|
flags |= (urtw_rate2rtl(11) & 0xf) << URTW_TX_FLAG_RTSRATE_SHIFT;
|
|
tx->flag = htole32(flags);
|
|
tx->retry = 3; /* CW minimum */
|
|
tx->retry |= 7 << 4; /* CW maximum */
|
|
tx->retry |= URTW_TX_MAXRETRY << 8; /* retry limitation */
|
|
m_copydata(m0, 0, m0->m_pkthdr.len, (uint8_t *)(tx + 1));
|
|
}
|
|
|
|
data->buflen = xferlen;
|
|
data->ni = ni;
|
|
data->m = m0;
|
|
|
|
if (sc->sc_flags & URTW_RTL8187B) {
|
|
switch (wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) {
|
|
case IEEE80211_FC0_TYPE_CTL:
|
|
case IEEE80211_FC0_TYPE_MGT:
|
|
xfer = sc->sc_xfer[URTW_8187B_BULK_TX_EP12];
|
|
break;
|
|
default:
|
|
KASSERT(M_WME_GETAC(m0) < URTW_8187B_TXPIPE_MAX,
|
|
("unsupported WME pipe %d", M_WME_GETAC(m0)));
|
|
xfer = rtl8187b_pipes[M_WME_GETAC(m0)];
|
|
break;
|
|
}
|
|
} else
|
|
xfer = (prior == URTW_PRIORITY_LOW) ?
|
|
sc->sc_xfer[URTW_8187L_BULK_TX_LOW] :
|
|
sc->sc_xfer[URTW_8187L_BULK_TX_NORMAL];
|
|
|
|
STAILQ_INSERT_TAIL(&sc->sc_tx_pending, data, next);
|
|
usbd_transfer_start(xfer);
|
|
|
|
error = urtw_led_ctl(sc, URTW_LED_CTL_TX);
|
|
if (error != 0)
|
|
device_printf(sc->sc_dev, "could not control LED (%d)\n",
|
|
error);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
urtw_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
|
|
{
|
|
struct ieee80211com *ic = vap->iv_ic;
|
|
struct urtw_softc *sc = ic->ic_softc;
|
|
struct urtw_vap *uvp = URTW_VAP(vap);
|
|
struct ieee80211_node *ni;
|
|
usb_error_t error = 0;
|
|
|
|
DPRINTF(sc, URTW_DEBUG_STATE, "%s: %s -> %s\n", __func__,
|
|
ieee80211_state_name[vap->iv_state],
|
|
ieee80211_state_name[nstate]);
|
|
|
|
sc->sc_state = nstate;
|
|
|
|
IEEE80211_UNLOCK(ic);
|
|
URTW_LOCK(sc);
|
|
usb_callout_stop(&sc->sc_led_ch);
|
|
callout_stop(&sc->sc_watchdog_ch);
|
|
|
|
switch (nstate) {
|
|
case IEEE80211_S_INIT:
|
|
case IEEE80211_S_SCAN:
|
|
case IEEE80211_S_AUTH:
|
|
case IEEE80211_S_ASSOC:
|
|
break;
|
|
case IEEE80211_S_RUN:
|
|
ni = ieee80211_ref_node(vap->iv_bss);
|
|
/* setting bssid. */
|
|
urtw_write32_m(sc, URTW_BSSID, ((uint32_t *)ni->ni_bssid)[0]);
|
|
urtw_write16_m(sc, URTW_BSSID + 4,
|
|
((uint16_t *)ni->ni_bssid)[2]);
|
|
urtw_update_msr(sc);
|
|
/* XXX maybe the below would be incorrect. */
|
|
urtw_write16_m(sc, URTW_ATIM_WND, 2);
|
|
urtw_write16_m(sc, URTW_ATIM_TR_ITV, 100);
|
|
urtw_write16_m(sc, URTW_BEACON_INTERVAL, 0x64);
|
|
urtw_write16_m(sc, URTW_BEACON_INTERVAL_TIME, 100);
|
|
error = urtw_led_ctl(sc, URTW_LED_CTL_LINK);
|
|
if (error != 0)
|
|
device_printf(sc->sc_dev,
|
|
"could not control LED (%d)\n", error);
|
|
ieee80211_free_node(ni);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
fail:
|
|
URTW_UNLOCK(sc);
|
|
IEEE80211_LOCK(ic);
|
|
return (uvp->newstate(vap, nstate, arg));
|
|
}
|
|
|
|
static void
|
|
urtw_watchdog(void *arg)
|
|
{
|
|
struct urtw_softc *sc = arg;
|
|
|
|
if (sc->sc_txtimer > 0) {
|
|
if (--sc->sc_txtimer == 0) {
|
|
device_printf(sc->sc_dev, "device timeout\n");
|
|
counter_u64_add(sc->sc_ic.ic_oerrors, 1);
|
|
return;
|
|
}
|
|
callout_reset(&sc->sc_watchdog_ch, hz, urtw_watchdog, sc);
|
|
}
|
|
}
|
|
|
|
static void
|
|
urtw_set_multi(void *arg)
|
|
{
|
|
/* XXX don't know how to set a device. Lack of docs. */
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_set_rate(struct urtw_softc *sc)
|
|
{
|
|
int i, basic_rate, min_rr_rate, max_rr_rate;
|
|
uint16_t data;
|
|
usb_error_t error;
|
|
|
|
basic_rate = urtw_rate2rtl(48);
|
|
min_rr_rate = urtw_rate2rtl(12);
|
|
max_rr_rate = urtw_rate2rtl(48);
|
|
|
|
urtw_write8_m(sc, URTW_RESP_RATE,
|
|
max_rr_rate << URTW_RESP_MAX_RATE_SHIFT |
|
|
min_rr_rate << URTW_RESP_MIN_RATE_SHIFT);
|
|
|
|
urtw_read16_m(sc, URTW_BRSR, &data);
|
|
data &= ~URTW_BRSR_MBR_8185;
|
|
|
|
for (i = 0; i <= basic_rate; i++)
|
|
data |= (1 << i);
|
|
|
|
urtw_write16_m(sc, URTW_BRSR, data);
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static uint16_t
|
|
urtw_rate2rtl(uint32_t rate)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < nitems(urtw_ratetable); i++) {
|
|
if (rate == urtw_ratetable[i].reg)
|
|
return urtw_ratetable[i].val;
|
|
}
|
|
|
|
return (3);
|
|
}
|
|
|
|
static uint16_t
|
|
urtw_rtl2rate(uint32_t rate)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < nitems(urtw_ratetable); i++) {
|
|
if (rate == urtw_ratetable[i].val)
|
|
return urtw_ratetable[i].reg;
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_update_msr(struct urtw_softc *sc)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
uint8_t data;
|
|
usb_error_t error;
|
|
|
|
urtw_read8_m(sc, URTW_MSR, &data);
|
|
data &= ~URTW_MSR_LINK_MASK;
|
|
|
|
if (sc->sc_state == IEEE80211_S_RUN) {
|
|
switch (ic->ic_opmode) {
|
|
case IEEE80211_M_STA:
|
|
case IEEE80211_M_MONITOR:
|
|
data |= URTW_MSR_LINK_STA;
|
|
if (sc->sc_flags & URTW_RTL8187B)
|
|
data |= URTW_MSR_LINK_ENEDCA;
|
|
break;
|
|
case IEEE80211_M_IBSS:
|
|
data |= URTW_MSR_LINK_ADHOC;
|
|
break;
|
|
case IEEE80211_M_HOSTAP:
|
|
data |= URTW_MSR_LINK_HOSTAP;
|
|
break;
|
|
default:
|
|
DPRINTF(sc, URTW_DEBUG_STATE,
|
|
"unsupported operation mode 0x%x\n",
|
|
ic->ic_opmode);
|
|
error = USB_ERR_INVAL;
|
|
goto fail;
|
|
}
|
|
} else
|
|
data |= URTW_MSR_LINK_NONE;
|
|
|
|
urtw_write8_m(sc, URTW_MSR, data);
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_read8_c(struct urtw_softc *sc, int val, uint8_t *data)
|
|
{
|
|
struct usb_device_request req;
|
|
usb_error_t error;
|
|
|
|
URTW_ASSERT_LOCKED(sc);
|
|
|
|
req.bmRequestType = UT_READ_VENDOR_DEVICE;
|
|
req.bRequest = URTW_8187_GETREGS_REQ;
|
|
USETW(req.wValue, (val & 0xff) | 0xff00);
|
|
USETW(req.wIndex, (val >> 8) & 0x3);
|
|
USETW(req.wLength, sizeof(uint8_t));
|
|
|
|
error = urtw_do_request(sc, &req, data);
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_read16_c(struct urtw_softc *sc, int val, uint16_t *data)
|
|
{
|
|
struct usb_device_request req;
|
|
usb_error_t error;
|
|
|
|
URTW_ASSERT_LOCKED(sc);
|
|
|
|
req.bmRequestType = UT_READ_VENDOR_DEVICE;
|
|
req.bRequest = URTW_8187_GETREGS_REQ;
|
|
USETW(req.wValue, (val & 0xff) | 0xff00);
|
|
USETW(req.wIndex, (val >> 8) & 0x3);
|
|
USETW(req.wLength, sizeof(uint16_t));
|
|
|
|
error = urtw_do_request(sc, &req, data);
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_read32_c(struct urtw_softc *sc, int val, uint32_t *data)
|
|
{
|
|
struct usb_device_request req;
|
|
usb_error_t error;
|
|
|
|
URTW_ASSERT_LOCKED(sc);
|
|
|
|
req.bmRequestType = UT_READ_VENDOR_DEVICE;
|
|
req.bRequest = URTW_8187_GETREGS_REQ;
|
|
USETW(req.wValue, (val & 0xff) | 0xff00);
|
|
USETW(req.wIndex, (val >> 8) & 0x3);
|
|
USETW(req.wLength, sizeof(uint32_t));
|
|
|
|
error = urtw_do_request(sc, &req, data);
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_write8_c(struct urtw_softc *sc, int val, uint8_t data)
|
|
{
|
|
struct usb_device_request req;
|
|
|
|
URTW_ASSERT_LOCKED(sc);
|
|
|
|
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
|
|
req.bRequest = URTW_8187_SETREGS_REQ;
|
|
USETW(req.wValue, (val & 0xff) | 0xff00);
|
|
USETW(req.wIndex, (val >> 8) & 0x3);
|
|
USETW(req.wLength, sizeof(uint8_t));
|
|
|
|
return (urtw_do_request(sc, &req, &data));
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_write16_c(struct urtw_softc *sc, int val, uint16_t data)
|
|
{
|
|
struct usb_device_request req;
|
|
|
|
URTW_ASSERT_LOCKED(sc);
|
|
|
|
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
|
|
req.bRequest = URTW_8187_SETREGS_REQ;
|
|
USETW(req.wValue, (val & 0xff) | 0xff00);
|
|
USETW(req.wIndex, (val >> 8) & 0x3);
|
|
USETW(req.wLength, sizeof(uint16_t));
|
|
|
|
return (urtw_do_request(sc, &req, &data));
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_write32_c(struct urtw_softc *sc, int val, uint32_t data)
|
|
{
|
|
struct usb_device_request req;
|
|
|
|
URTW_ASSERT_LOCKED(sc);
|
|
|
|
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
|
|
req.bRequest = URTW_8187_SETREGS_REQ;
|
|
USETW(req.wValue, (val & 0xff) | 0xff00);
|
|
USETW(req.wIndex, (val >> 8) & 0x3);
|
|
USETW(req.wLength, sizeof(uint32_t));
|
|
|
|
return (urtw_do_request(sc, &req, &data));
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_get_macaddr(struct urtw_softc *sc)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
uint32_t data;
|
|
usb_error_t error;
|
|
|
|
error = urtw_eprom_read32(sc, URTW_EPROM_MACADDR, &data);
|
|
if (error != 0)
|
|
goto fail;
|
|
ic->ic_macaddr[0] = data & 0xff;
|
|
ic->ic_macaddr[1] = (data & 0xff00) >> 8;
|
|
error = urtw_eprom_read32(sc, URTW_EPROM_MACADDR + 1, &data);
|
|
if (error != 0)
|
|
goto fail;
|
|
ic->ic_macaddr[2] = data & 0xff;
|
|
ic->ic_macaddr[3] = (data & 0xff00) >> 8;
|
|
error = urtw_eprom_read32(sc, URTW_EPROM_MACADDR + 2, &data);
|
|
if (error != 0)
|
|
goto fail;
|
|
ic->ic_macaddr[4] = data & 0xff;
|
|
ic->ic_macaddr[5] = (data & 0xff00) >> 8;
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_eprom_read32(struct urtw_softc *sc, uint32_t addr, uint32_t *data)
|
|
{
|
|
#define URTW_READCMD_LEN 3
|
|
int addrlen, i;
|
|
int16_t addrstr[8], data16, readcmd[] = { 1, 1, 0 };
|
|
usb_error_t error;
|
|
|
|
/* NB: make sure the buffer is initialized */
|
|
*data = 0;
|
|
|
|
/* enable EPROM programming */
|
|
urtw_write8_m(sc, URTW_EPROM_CMD, URTW_EPROM_CMD_PROGRAM_MODE);
|
|
DELAY(URTW_EPROM_DELAY);
|
|
|
|
error = urtw_eprom_cs(sc, URTW_EPROM_ENABLE);
|
|
if (error != 0)
|
|
goto fail;
|
|
error = urtw_eprom_ck(sc);
|
|
if (error != 0)
|
|
goto fail;
|
|
error = urtw_eprom_sendbits(sc, readcmd, URTW_READCMD_LEN);
|
|
if (error != 0)
|
|
goto fail;
|
|
if (sc->sc_epromtype == URTW_EEPROM_93C56) {
|
|
addrlen = 8;
|
|
addrstr[0] = addr & (1 << 7);
|
|
addrstr[1] = addr & (1 << 6);
|
|
addrstr[2] = addr & (1 << 5);
|
|
addrstr[3] = addr & (1 << 4);
|
|
addrstr[4] = addr & (1 << 3);
|
|
addrstr[5] = addr & (1 << 2);
|
|
addrstr[6] = addr & (1 << 1);
|
|
addrstr[7] = addr & (1 << 0);
|
|
} else {
|
|
addrlen=6;
|
|
addrstr[0] = addr & (1 << 5);
|
|
addrstr[1] = addr & (1 << 4);
|
|
addrstr[2] = addr & (1 << 3);
|
|
addrstr[3] = addr & (1 << 2);
|
|
addrstr[4] = addr & (1 << 1);
|
|
addrstr[5] = addr & (1 << 0);
|
|
}
|
|
error = urtw_eprom_sendbits(sc, addrstr, addrlen);
|
|
if (error != 0)
|
|
goto fail;
|
|
|
|
error = urtw_eprom_writebit(sc, 0);
|
|
if (error != 0)
|
|
goto fail;
|
|
|
|
for (i = 0; i < 16; i++) {
|
|
error = urtw_eprom_ck(sc);
|
|
if (error != 0)
|
|
goto fail;
|
|
error = urtw_eprom_readbit(sc, &data16);
|
|
if (error != 0)
|
|
goto fail;
|
|
|
|
(*data) |= (data16 << (15 - i));
|
|
}
|
|
|
|
error = urtw_eprom_cs(sc, URTW_EPROM_DISABLE);
|
|
if (error != 0)
|
|
goto fail;
|
|
error = urtw_eprom_ck(sc);
|
|
if (error != 0)
|
|
goto fail;
|
|
|
|
/* now disable EPROM programming */
|
|
urtw_write8_m(sc, URTW_EPROM_CMD, URTW_EPROM_CMD_NORMAL_MODE);
|
|
fail:
|
|
return (error);
|
|
#undef URTW_READCMD_LEN
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_eprom_cs(struct urtw_softc *sc, int able)
|
|
{
|
|
uint8_t data;
|
|
usb_error_t error;
|
|
|
|
urtw_read8_m(sc, URTW_EPROM_CMD, &data);
|
|
if (able == URTW_EPROM_ENABLE)
|
|
urtw_write8_m(sc, URTW_EPROM_CMD, data | URTW_EPROM_CS);
|
|
else
|
|
urtw_write8_m(sc, URTW_EPROM_CMD, data & ~URTW_EPROM_CS);
|
|
DELAY(URTW_EPROM_DELAY);
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_eprom_ck(struct urtw_softc *sc)
|
|
{
|
|
uint8_t data;
|
|
usb_error_t error;
|
|
|
|
/* masking */
|
|
urtw_read8_m(sc, URTW_EPROM_CMD, &data);
|
|
urtw_write8_m(sc, URTW_EPROM_CMD, data | URTW_EPROM_CK);
|
|
DELAY(URTW_EPROM_DELAY);
|
|
/* unmasking */
|
|
urtw_read8_m(sc, URTW_EPROM_CMD, &data);
|
|
urtw_write8_m(sc, URTW_EPROM_CMD, data & ~URTW_EPROM_CK);
|
|
DELAY(URTW_EPROM_DELAY);
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_eprom_readbit(struct urtw_softc *sc, int16_t *data)
|
|
{
|
|
uint8_t data8;
|
|
usb_error_t error;
|
|
|
|
urtw_read8_m(sc, URTW_EPROM_CMD, &data8);
|
|
*data = (data8 & URTW_EPROM_READBIT) ? 1 : 0;
|
|
DELAY(URTW_EPROM_DELAY);
|
|
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_eprom_writebit(struct urtw_softc *sc, int16_t bit)
|
|
{
|
|
uint8_t data;
|
|
usb_error_t error;
|
|
|
|
urtw_read8_m(sc, URTW_EPROM_CMD, &data);
|
|
if (bit != 0)
|
|
urtw_write8_m(sc, URTW_EPROM_CMD, data | URTW_EPROM_WRITEBIT);
|
|
else
|
|
urtw_write8_m(sc, URTW_EPROM_CMD, data & ~URTW_EPROM_WRITEBIT);
|
|
DELAY(URTW_EPROM_DELAY);
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_eprom_sendbits(struct urtw_softc *sc, int16_t *buf, int buflen)
|
|
{
|
|
int i = 0;
|
|
usb_error_t error = 0;
|
|
|
|
for (i = 0; i < buflen; i++) {
|
|
error = urtw_eprom_writebit(sc, buf[i]);
|
|
if (error != 0)
|
|
goto fail;
|
|
error = urtw_eprom_ck(sc);
|
|
if (error != 0)
|
|
goto fail;
|
|
}
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
|
|
static usb_error_t
|
|
urtw_get_txpwr(struct urtw_softc *sc)
|
|
{
|
|
int i, j;
|
|
uint32_t data;
|
|
usb_error_t error;
|
|
|
|
error = urtw_eprom_read32(sc, URTW_EPROM_TXPW_BASE, &data);
|
|
if (error != 0)
|
|
goto fail;
|
|
sc->sc_txpwr_cck_base = data & 0xf;
|
|
sc->sc_txpwr_ofdm_base = (data >> 4) & 0xf;
|
|
|
|
for (i = 1, j = 0; i < 6; i += 2, j++) {
|
|
error = urtw_eprom_read32(sc, URTW_EPROM_TXPW0 + j, &data);
|
|
if (error != 0)
|
|
goto fail;
|
|
sc->sc_txpwr_cck[i] = data & 0xf;
|
|
sc->sc_txpwr_cck[i + 1] = (data & 0xf00) >> 8;
|
|
sc->sc_txpwr_ofdm[i] = (data & 0xf0) >> 4;
|
|
sc->sc_txpwr_ofdm[i + 1] = (data & 0xf000) >> 12;
|
|
}
|
|
for (i = 1, j = 0; i < 4; i += 2, j++) {
|
|
error = urtw_eprom_read32(sc, URTW_EPROM_TXPW1 + j, &data);
|
|
if (error != 0)
|
|
goto fail;
|
|
sc->sc_txpwr_cck[i + 6] = data & 0xf;
|
|
sc->sc_txpwr_cck[i + 6 + 1] = (data & 0xf00) >> 8;
|
|
sc->sc_txpwr_ofdm[i + 6] = (data & 0xf0) >> 4;
|
|
sc->sc_txpwr_ofdm[i + 6 + 1] = (data & 0xf000) >> 12;
|
|
}
|
|
if (sc->sc_flags & URTW_RTL8187B) {
|
|
error = urtw_eprom_read32(sc, URTW_EPROM_TXPW2, &data);
|
|
if (error != 0)
|
|
goto fail;
|
|
sc->sc_txpwr_cck[1 + 6 + 4] = data & 0xf;
|
|
sc->sc_txpwr_ofdm[1 + 6 + 4] = (data & 0xf0) >> 4;
|
|
error = urtw_eprom_read32(sc, 0x0a, &data);
|
|
if (error != 0)
|
|
goto fail;
|
|
sc->sc_txpwr_cck[2 + 6 + 4] = data & 0xf;
|
|
sc->sc_txpwr_ofdm[2 + 6 + 4] = (data & 0xf0) >> 4;
|
|
error = urtw_eprom_read32(sc, 0x1c, &data);
|
|
if (error != 0)
|
|
goto fail;
|
|
sc->sc_txpwr_cck[3 + 6 + 4] = data & 0xf;
|
|
sc->sc_txpwr_cck[3 + 6 + 4 + 1] = (data & 0xf00) >> 8;
|
|
sc->sc_txpwr_ofdm[3 + 6 + 4] = (data & 0xf0) >> 4;
|
|
sc->sc_txpwr_ofdm[3 + 6 + 4 + 1] = (data & 0xf000) >> 12;
|
|
} else {
|
|
for (i = 1, j = 0; i < 4; i += 2, j++) {
|
|
error = urtw_eprom_read32(sc, URTW_EPROM_TXPW2 + j,
|
|
&data);
|
|
if (error != 0)
|
|
goto fail;
|
|
sc->sc_txpwr_cck[i + 6 + 4] = data & 0xf;
|
|
sc->sc_txpwr_cck[i + 6 + 4 + 1] = (data & 0xf00) >> 8;
|
|
sc->sc_txpwr_ofdm[i + 6 + 4] = (data & 0xf0) >> 4;
|
|
sc->sc_txpwr_ofdm[i + 6 + 4 + 1] = (data & 0xf000) >> 12;
|
|
}
|
|
}
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
|
|
static usb_error_t
|
|
urtw_get_rfchip(struct urtw_softc *sc)
|
|
{
|
|
int ret;
|
|
uint8_t data8;
|
|
uint32_t data;
|
|
usb_error_t error;
|
|
|
|
if (sc->sc_flags & URTW_RTL8187B) {
|
|
urtw_read8_m(sc, 0xe1, &data8);
|
|
switch (data8) {
|
|
case 0:
|
|
sc->sc_flags |= URTW_RTL8187B_REV_B;
|
|
break;
|
|
case 1:
|
|
sc->sc_flags |= URTW_RTL8187B_REV_D;
|
|
break;
|
|
case 2:
|
|
sc->sc_flags |= URTW_RTL8187B_REV_E;
|
|
break;
|
|
default:
|
|
device_printf(sc->sc_dev, "unknown type: %#x\n", data8);
|
|
sc->sc_flags |= URTW_RTL8187B_REV_B;
|
|
break;
|
|
}
|
|
} else {
|
|
urtw_read32_m(sc, URTW_TX_CONF, &data);
|
|
switch (data & URTW_TX_HWMASK) {
|
|
case URTW_TX_R8187vD_B:
|
|
sc->sc_flags |= URTW_RTL8187B;
|
|
break;
|
|
case URTW_TX_R8187vD:
|
|
break;
|
|
default:
|
|
device_printf(sc->sc_dev, "unknown RTL8187L type: %#x\n",
|
|
data & URTW_TX_HWMASK);
|
|
break;
|
|
}
|
|
}
|
|
|
|
error = urtw_eprom_read32(sc, URTW_EPROM_RFCHIPID, &data);
|
|
if (error != 0)
|
|
goto fail;
|
|
switch (data & 0xff) {
|
|
case URTW_EPROM_RFCHIPID_RTL8225U:
|
|
error = urtw_8225_isv2(sc, &ret);
|
|
if (error != 0)
|
|
goto fail;
|
|
if (ret == 0) {
|
|
sc->sc_rf_init = urtw_8225_rf_init;
|
|
sc->sc_rf_set_sens = urtw_8225_rf_set_sens;
|
|
sc->sc_rf_set_chan = urtw_8225_rf_set_chan;
|
|
sc->sc_rf_stop = urtw_8225_rf_stop;
|
|
} else {
|
|
sc->sc_rf_init = urtw_8225v2_rf_init;
|
|
sc->sc_rf_set_chan = urtw_8225v2_rf_set_chan;
|
|
sc->sc_rf_stop = urtw_8225_rf_stop;
|
|
}
|
|
sc->sc_max_sens = URTW_8225_RF_MAX_SENS;
|
|
sc->sc_sens = URTW_8225_RF_DEF_SENS;
|
|
break;
|
|
case URTW_EPROM_RFCHIPID_RTL8225Z2:
|
|
sc->sc_rf_init = urtw_8225v2b_rf_init;
|
|
sc->sc_rf_set_chan = urtw_8225v2b_rf_set_chan;
|
|
sc->sc_max_sens = URTW_8225_RF_MAX_SENS;
|
|
sc->sc_sens = URTW_8225_RF_DEF_SENS;
|
|
sc->sc_rf_stop = urtw_8225_rf_stop;
|
|
break;
|
|
default:
|
|
DPRINTF(sc, URTW_DEBUG_STATE,
|
|
"unsupported RF chip %d\n", data & 0xff);
|
|
error = USB_ERR_INVAL;
|
|
goto fail;
|
|
}
|
|
|
|
device_printf(sc->sc_dev, "%s rf %s hwrev %s\n",
|
|
(sc->sc_flags & URTW_RTL8187B) ? "rtl8187b" : "rtl8187l",
|
|
((data & 0xff) == URTW_EPROM_RFCHIPID_RTL8225U) ? "rtl8225u" :
|
|
"rtl8225z2",
|
|
(sc->sc_flags & URTW_RTL8187B) ? ((data8 == 0) ? "b" :
|
|
(data8 == 1) ? "d" : "e") : "none");
|
|
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
|
|
static usb_error_t
|
|
urtw_led_init(struct urtw_softc *sc)
|
|
{
|
|
uint32_t rev;
|
|
usb_error_t error;
|
|
|
|
urtw_read8_m(sc, URTW_PSR, &sc->sc_psr);
|
|
error = urtw_eprom_read32(sc, URTW_EPROM_SWREV, &rev);
|
|
if (error != 0)
|
|
goto fail;
|
|
|
|
switch (rev & URTW_EPROM_CID_MASK) {
|
|
case URTW_EPROM_CID_ALPHA0:
|
|
sc->sc_strategy = URTW_SW_LED_MODE1;
|
|
break;
|
|
case URTW_EPROM_CID_SERCOMM_PS:
|
|
sc->sc_strategy = URTW_SW_LED_MODE3;
|
|
break;
|
|
case URTW_EPROM_CID_HW_LED:
|
|
sc->sc_strategy = URTW_HW_LED;
|
|
break;
|
|
case URTW_EPROM_CID_RSVD0:
|
|
case URTW_EPROM_CID_RSVD1:
|
|
default:
|
|
sc->sc_strategy = URTW_SW_LED_MODE0;
|
|
break;
|
|
}
|
|
|
|
sc->sc_gpio_ledpin = URTW_LED_PIN_GPIO0;
|
|
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
|
|
static usb_error_t
|
|
urtw_8225_rf_init(struct urtw_softc *sc)
|
|
{
|
|
unsigned int i;
|
|
uint16_t data;
|
|
usb_error_t error;
|
|
|
|
error = urtw_8180_set_anaparam(sc, URTW_8225_ANAPARAM_ON);
|
|
if (error)
|
|
goto fail;
|
|
|
|
error = urtw_8225_usb_init(sc);
|
|
if (error)
|
|
goto fail;
|
|
|
|
urtw_write32_m(sc, URTW_RF_TIMING, 0x000a8008);
|
|
urtw_read16_m(sc, URTW_BRSR, &data); /* XXX ??? */
|
|
urtw_write16_m(sc, URTW_BRSR, 0xffff);
|
|
urtw_write32_m(sc, URTW_RF_PARA, 0x100044);
|
|
|
|
error = urtw_set_mode(sc, URTW_EPROM_CMD_CONFIG);
|
|
if (error)
|
|
goto fail;
|
|
urtw_write8_m(sc, URTW_CONFIG3, 0x44);
|
|
error = urtw_set_mode(sc, URTW_EPROM_CMD_NORMAL);
|
|
if (error)
|
|
goto fail;
|
|
|
|
error = urtw_8185_rf_pins_enable(sc);
|
|
if (error)
|
|
goto fail;
|
|
usb_pause_mtx(&sc->sc_mtx, 1000);
|
|
|
|
for (i = 0; i < nitems(urtw_8225_rf_part1); i++) {
|
|
urtw_8225_write(sc, urtw_8225_rf_part1[i].reg,
|
|
urtw_8225_rf_part1[i].val);
|
|
usb_pause_mtx(&sc->sc_mtx, 1);
|
|
}
|
|
usb_pause_mtx(&sc->sc_mtx, 100);
|
|
urtw_8225_write(sc,
|
|
URTW_8225_ADDR_2_MAGIC, URTW_8225_ADDR_2_DATA_MAGIC1);
|
|
usb_pause_mtx(&sc->sc_mtx, 200);
|
|
urtw_8225_write(sc,
|
|
URTW_8225_ADDR_2_MAGIC, URTW_8225_ADDR_2_DATA_MAGIC2);
|
|
usb_pause_mtx(&sc->sc_mtx, 200);
|
|
urtw_8225_write(sc,
|
|
URTW_8225_ADDR_0_MAGIC, URTW_8225_ADDR_0_DATA_MAGIC3);
|
|
|
|
for (i = 0; i < 95; i++) {
|
|
urtw_8225_write(sc, URTW_8225_ADDR_1_MAGIC, (uint8_t)(i + 1));
|
|
urtw_8225_write(sc, URTW_8225_ADDR_2_MAGIC, urtw_8225_rxgain[i]);
|
|
}
|
|
|
|
urtw_8225_write(sc,
|
|
URTW_8225_ADDR_0_MAGIC, URTW_8225_ADDR_0_DATA_MAGIC4);
|
|
urtw_8225_write(sc,
|
|
URTW_8225_ADDR_0_MAGIC, URTW_8225_ADDR_0_DATA_MAGIC5);
|
|
|
|
for (i = 0; i < 128; i++) {
|
|
urtw_8187_write_phy_ofdm(sc, 0xb, urtw_8225_agc[i]);
|
|
usb_pause_mtx(&sc->sc_mtx, 1);
|
|
urtw_8187_write_phy_ofdm(sc, 0xa, (uint8_t)i + 0x80);
|
|
usb_pause_mtx(&sc->sc_mtx, 1);
|
|
}
|
|
|
|
for (i = 0; i < nitems(urtw_8225_rf_part2); i++) {
|
|
urtw_8187_write_phy_ofdm(sc, urtw_8225_rf_part2[i].reg,
|
|
urtw_8225_rf_part2[i].val);
|
|
usb_pause_mtx(&sc->sc_mtx, 1);
|
|
}
|
|
|
|
error = urtw_8225_setgain(sc, 4);
|
|
if (error)
|
|
goto fail;
|
|
|
|
for (i = 0; i < nitems(urtw_8225_rf_part3); i++) {
|
|
urtw_8187_write_phy_cck(sc, urtw_8225_rf_part3[i].reg,
|
|
urtw_8225_rf_part3[i].val);
|
|
usb_pause_mtx(&sc->sc_mtx, 1);
|
|
}
|
|
|
|
urtw_write8_m(sc, URTW_TESTR, 0x0d);
|
|
|
|
error = urtw_8225_set_txpwrlvl(sc, 1);
|
|
if (error)
|
|
goto fail;
|
|
|
|
urtw_8187_write_phy_cck(sc, 0x10, 0x9b);
|
|
usb_pause_mtx(&sc->sc_mtx, 1);
|
|
urtw_8187_write_phy_ofdm(sc, 0x26, 0x90);
|
|
usb_pause_mtx(&sc->sc_mtx, 1);
|
|
|
|
/* TX ant A, 0x0 for B */
|
|
error = urtw_8185_tx_antenna(sc, 0x3);
|
|
if (error)
|
|
goto fail;
|
|
urtw_write32_m(sc, URTW_HSSI_PARA, 0x3dc00002);
|
|
|
|
error = urtw_8225_rf_set_chan(sc, 1);
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_8185_rf_pins_enable(struct urtw_softc *sc)
|
|
{
|
|
usb_error_t error = 0;
|
|
|
|
urtw_write16_m(sc, URTW_RF_PINS_ENABLE, 0x1ff7);
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_8185_tx_antenna(struct urtw_softc *sc, uint8_t ant)
|
|
{
|
|
usb_error_t error;
|
|
|
|
urtw_write8_m(sc, URTW_TX_ANTENNA, ant);
|
|
usb_pause_mtx(&sc->sc_mtx, 1);
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_8187_write_phy_ofdm_c(struct urtw_softc *sc, uint8_t addr, uint32_t data)
|
|
{
|
|
|
|
data = data & 0xff;
|
|
return urtw_8187_write_phy(sc, addr, data);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_8187_write_phy_cck_c(struct urtw_softc *sc, uint8_t addr, uint32_t data)
|
|
{
|
|
|
|
data = data & 0xff;
|
|
return urtw_8187_write_phy(sc, addr, data | 0x10000);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_8187_write_phy(struct urtw_softc *sc, uint8_t addr, uint32_t data)
|
|
{
|
|
uint32_t phyw;
|
|
usb_error_t error;
|
|
|
|
phyw = ((data << 8) | (addr | 0x80));
|
|
urtw_write8_m(sc, URTW_PHY_MAGIC4, ((phyw & 0xff000000) >> 24));
|
|
urtw_write8_m(sc, URTW_PHY_MAGIC3, ((phyw & 0x00ff0000) >> 16));
|
|
urtw_write8_m(sc, URTW_PHY_MAGIC2, ((phyw & 0x0000ff00) >> 8));
|
|
urtw_write8_m(sc, URTW_PHY_MAGIC1, ((phyw & 0x000000ff)));
|
|
usb_pause_mtx(&sc->sc_mtx, 1);
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_8225_setgain(struct urtw_softc *sc, int16_t gain)
|
|
{
|
|
usb_error_t error;
|
|
|
|
urtw_8187_write_phy_ofdm(sc, 0x0d, urtw_8225_gain[gain * 4]);
|
|
urtw_8187_write_phy_ofdm(sc, 0x1b, urtw_8225_gain[gain * 4 + 2]);
|
|
urtw_8187_write_phy_ofdm(sc, 0x1d, urtw_8225_gain[gain * 4 + 3]);
|
|
urtw_8187_write_phy_ofdm(sc, 0x23, urtw_8225_gain[gain * 4 + 1]);
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_8225_usb_init(struct urtw_softc *sc)
|
|
{
|
|
uint8_t data;
|
|
usb_error_t error;
|
|
|
|
urtw_write8_m(sc, URTW_RF_PINS_SELECT + 1, 0);
|
|
urtw_write8_m(sc, URTW_GPIO, 0);
|
|
error = urtw_read8e(sc, 0x53, &data);
|
|
if (error)
|
|
goto fail;
|
|
error = urtw_write8e(sc, 0x53, data | (1 << 7));
|
|
if (error)
|
|
goto fail;
|
|
urtw_write8_m(sc, URTW_RF_PINS_SELECT + 1, 4);
|
|
urtw_write8_m(sc, URTW_GPIO, 0x20);
|
|
urtw_write8_m(sc, URTW_GP_ENABLE, 0);
|
|
|
|
urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, 0x80);
|
|
urtw_write16_m(sc, URTW_RF_PINS_SELECT, 0x80);
|
|
urtw_write16_m(sc, URTW_RF_PINS_ENABLE, 0x80);
|
|
|
|
usb_pause_mtx(&sc->sc_mtx, 500);
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_8225_write_c(struct urtw_softc *sc, uint8_t addr, uint16_t data)
|
|
{
|
|
uint16_t d80, d82, d84;
|
|
usb_error_t error;
|
|
|
|
urtw_read16_m(sc, URTW_RF_PINS_OUTPUT, &d80);
|
|
d80 &= URTW_RF_PINS_MAGIC1;
|
|
urtw_read16_m(sc, URTW_RF_PINS_ENABLE, &d82);
|
|
urtw_read16_m(sc, URTW_RF_PINS_SELECT, &d84);
|
|
d84 &= URTW_RF_PINS_MAGIC2;
|
|
urtw_write16_m(sc, URTW_RF_PINS_ENABLE, d82 | URTW_RF_PINS_MAGIC3);
|
|
urtw_write16_m(sc, URTW_RF_PINS_SELECT, d84 | URTW_RF_PINS_MAGIC3);
|
|
DELAY(10);
|
|
|
|
urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, d80 | URTW_BB_HOST_BANG_EN);
|
|
DELAY(2);
|
|
urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, d80);
|
|
DELAY(10);
|
|
|
|
error = urtw_8225_write_s16(sc, addr, 0x8225, &data);
|
|
if (error != 0)
|
|
goto fail;
|
|
|
|
urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, d80 | URTW_BB_HOST_BANG_EN);
|
|
DELAY(10);
|
|
urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, d80 | URTW_BB_HOST_BANG_EN);
|
|
urtw_write16_m(sc, URTW_RF_PINS_SELECT, d84);
|
|
usb_pause_mtx(&sc->sc_mtx, 2);
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_8225_write_s16(struct urtw_softc *sc, uint8_t addr, int index,
|
|
uint16_t *data)
|
|
{
|
|
uint8_t buf[2];
|
|
uint16_t data16;
|
|
struct usb_device_request req;
|
|
usb_error_t error = 0;
|
|
|
|
data16 = *data;
|
|
|
|
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
|
|
req.bRequest = URTW_8187_SETREGS_REQ;
|
|
USETW(req.wValue, addr);
|
|
USETW(req.wIndex, index);
|
|
USETW(req.wLength, sizeof(uint16_t));
|
|
buf[0] = (data16 & 0x00ff);
|
|
buf[1] = (data16 & 0xff00) >> 8;
|
|
|
|
error = urtw_do_request(sc, &req, buf);
|
|
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_8225_rf_set_chan(struct urtw_softc *sc, int chan)
|
|
{
|
|
usb_error_t error;
|
|
|
|
error = urtw_8225_set_txpwrlvl(sc, chan);
|
|
if (error)
|
|
goto fail;
|
|
urtw_8225_write(sc, URTW_8225_ADDR_7_MAGIC, urtw_8225_channel[chan]);
|
|
usb_pause_mtx(&sc->sc_mtx, 10);
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_8225_rf_set_sens(struct urtw_softc *sc, int sens)
|
|
{
|
|
usb_error_t error;
|
|
|
|
if (sens < 0 || sens > 6)
|
|
return -1;
|
|
|
|
if (sens > 4)
|
|
urtw_8225_write(sc,
|
|
URTW_8225_ADDR_C_MAGIC, URTW_8225_ADDR_C_DATA_MAGIC1);
|
|
else
|
|
urtw_8225_write(sc,
|
|
URTW_8225_ADDR_C_MAGIC, URTW_8225_ADDR_C_DATA_MAGIC2);
|
|
|
|
sens = 6 - sens;
|
|
error = urtw_8225_setgain(sc, sens);
|
|
if (error)
|
|
goto fail;
|
|
|
|
urtw_8187_write_phy_cck(sc, 0x41, urtw_8225_threshold[sens]);
|
|
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_8225_set_txpwrlvl(struct urtw_softc *sc, int chan)
|
|
{
|
|
int i, idx, set;
|
|
uint8_t *cck_pwltable;
|
|
uint8_t cck_pwrlvl_max, ofdm_pwrlvl_min, ofdm_pwrlvl_max;
|
|
uint8_t cck_pwrlvl = sc->sc_txpwr_cck[chan] & 0xff;
|
|
uint8_t ofdm_pwrlvl = sc->sc_txpwr_ofdm[chan] & 0xff;
|
|
usb_error_t error;
|
|
|
|
cck_pwrlvl_max = 11;
|
|
ofdm_pwrlvl_max = 25; /* 12 -> 25 */
|
|
ofdm_pwrlvl_min = 10;
|
|
|
|
/* CCK power setting */
|
|
cck_pwrlvl = (cck_pwrlvl > cck_pwrlvl_max) ? cck_pwrlvl_max : cck_pwrlvl;
|
|
idx = cck_pwrlvl % 6;
|
|
set = cck_pwrlvl / 6;
|
|
cck_pwltable = (chan == 14) ? urtw_8225_txpwr_cck_ch14 :
|
|
urtw_8225_txpwr_cck;
|
|
|
|
urtw_write8_m(sc, URTW_TX_GAIN_CCK,
|
|
urtw_8225_tx_gain_cck_ofdm[set] >> 1);
|
|
for (i = 0; i < 8; i++) {
|
|
urtw_8187_write_phy_cck(sc, 0x44 + i,
|
|
cck_pwltable[idx * 8 + i]);
|
|
}
|
|
usb_pause_mtx(&sc->sc_mtx, 1);
|
|
|
|
/* OFDM power setting */
|
|
ofdm_pwrlvl = (ofdm_pwrlvl > (ofdm_pwrlvl_max - ofdm_pwrlvl_min)) ?
|
|
ofdm_pwrlvl_max : ofdm_pwrlvl + ofdm_pwrlvl_min;
|
|
ofdm_pwrlvl = (ofdm_pwrlvl > 35) ? 35 : ofdm_pwrlvl;
|
|
|
|
idx = ofdm_pwrlvl % 6;
|
|
set = ofdm_pwrlvl / 6;
|
|
|
|
error = urtw_8185_set_anaparam2(sc, URTW_8225_ANAPARAM2_ON);
|
|
if (error)
|
|
goto fail;
|
|
urtw_8187_write_phy_ofdm(sc, 2, 0x42);
|
|
urtw_8187_write_phy_ofdm(sc, 6, 0);
|
|
urtw_8187_write_phy_ofdm(sc, 8, 0);
|
|
|
|
urtw_write8_m(sc, URTW_TX_GAIN_OFDM,
|
|
urtw_8225_tx_gain_cck_ofdm[set] >> 1);
|
|
urtw_8187_write_phy_ofdm(sc, 0x5, urtw_8225_txpwr_ofdm[idx]);
|
|
urtw_8187_write_phy_ofdm(sc, 0x7, urtw_8225_txpwr_ofdm[idx]);
|
|
usb_pause_mtx(&sc->sc_mtx, 1);
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
|
|
static usb_error_t
|
|
urtw_8225_rf_stop(struct urtw_softc *sc)
|
|
{
|
|
uint8_t data;
|
|
usb_error_t error;
|
|
|
|
urtw_8225_write(sc, 0x4, 0x1f);
|
|
|
|
error = urtw_set_mode(sc, URTW_EPROM_CMD_CONFIG);
|
|
if (error)
|
|
goto fail;
|
|
|
|
urtw_read8_m(sc, URTW_CONFIG3, &data);
|
|
urtw_write8_m(sc, URTW_CONFIG3, data | URTW_CONFIG3_ANAPARAM_WRITE);
|
|
if (sc->sc_flags & URTW_RTL8187B) {
|
|
urtw_write32_m(sc, URTW_ANAPARAM2,
|
|
URTW_8187B_8225_ANAPARAM2_OFF);
|
|
urtw_write32_m(sc, URTW_ANAPARAM, URTW_8187B_8225_ANAPARAM_OFF);
|
|
urtw_write32_m(sc, URTW_ANAPARAM3,
|
|
URTW_8187B_8225_ANAPARAM3_OFF);
|
|
} else {
|
|
urtw_write32_m(sc, URTW_ANAPARAM2, URTW_8225_ANAPARAM2_OFF);
|
|
urtw_write32_m(sc, URTW_ANAPARAM, URTW_8225_ANAPARAM_OFF);
|
|
}
|
|
|
|
urtw_write8_m(sc, URTW_CONFIG3, data & ~URTW_CONFIG3_ANAPARAM_WRITE);
|
|
error = urtw_set_mode(sc, URTW_EPROM_CMD_NORMAL);
|
|
if (error)
|
|
goto fail;
|
|
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_8225v2_rf_init(struct urtw_softc *sc)
|
|
{
|
|
unsigned int i;
|
|
uint16_t data;
|
|
uint32_t data32;
|
|
usb_error_t error;
|
|
|
|
error = urtw_8180_set_anaparam(sc, URTW_8225_ANAPARAM_ON);
|
|
if (error)
|
|
goto fail;
|
|
|
|
error = urtw_8225_usb_init(sc);
|
|
if (error)
|
|
goto fail;
|
|
|
|
urtw_write32_m(sc, URTW_RF_TIMING, 0x000a8008);
|
|
urtw_read16_m(sc, URTW_BRSR, &data); /* XXX ??? */
|
|
urtw_write16_m(sc, URTW_BRSR, 0xffff);
|
|
urtw_write32_m(sc, URTW_RF_PARA, 0x100044);
|
|
|
|
error = urtw_set_mode(sc, URTW_EPROM_CMD_CONFIG);
|
|
if (error)
|
|
goto fail;
|
|
urtw_write8_m(sc, URTW_CONFIG3, 0x44);
|
|
error = urtw_set_mode(sc, URTW_EPROM_CMD_NORMAL);
|
|
if (error)
|
|
goto fail;
|
|
|
|
error = urtw_8185_rf_pins_enable(sc);
|
|
if (error)
|
|
goto fail;
|
|
|
|
usb_pause_mtx(&sc->sc_mtx, 500);
|
|
|
|
for (i = 0; i < nitems(urtw_8225v2_rf_part1); i++) {
|
|
urtw_8225_write(sc, urtw_8225v2_rf_part1[i].reg,
|
|
urtw_8225v2_rf_part1[i].val);
|
|
}
|
|
usb_pause_mtx(&sc->sc_mtx, 50);
|
|
|
|
urtw_8225_write(sc,
|
|
URTW_8225_ADDR_0_MAGIC, URTW_8225_ADDR_0_DATA_MAGIC1);
|
|
|
|
for (i = 0; i < 95; i++) {
|
|
urtw_8225_write(sc, URTW_8225_ADDR_1_MAGIC, (uint8_t)(i + 1));
|
|
urtw_8225_write(sc, URTW_8225_ADDR_2_MAGIC,
|
|
urtw_8225v2_rxgain[i]);
|
|
}
|
|
|
|
urtw_8225_write(sc,
|
|
URTW_8225_ADDR_3_MAGIC, URTW_8225_ADDR_3_DATA_MAGIC1);
|
|
urtw_8225_write(sc,
|
|
URTW_8225_ADDR_5_MAGIC, URTW_8225_ADDR_5_DATA_MAGIC1);
|
|
urtw_8225_write(sc,
|
|
URTW_8225_ADDR_0_MAGIC, URTW_8225_ADDR_0_DATA_MAGIC2);
|
|
urtw_8225_write(sc,
|
|
URTW_8225_ADDR_2_MAGIC, URTW_8225_ADDR_2_DATA_MAGIC1);
|
|
usb_pause_mtx(&sc->sc_mtx, 100);
|
|
urtw_8225_write(sc,
|
|
URTW_8225_ADDR_2_MAGIC, URTW_8225_ADDR_2_DATA_MAGIC2);
|
|
usb_pause_mtx(&sc->sc_mtx, 100);
|
|
|
|
error = urtw_8225_read(sc, URTW_8225_ADDR_6_MAGIC, &data32);
|
|
if (error != 0)
|
|
goto fail;
|
|
if (data32 != URTW_8225_ADDR_6_DATA_MAGIC1)
|
|
device_printf(sc->sc_dev, "expect 0xe6!! (0x%x)\n", data32);
|
|
if (!(data32 & URTW_8225_ADDR_6_DATA_MAGIC2)) {
|
|
urtw_8225_write(sc,
|
|
URTW_8225_ADDR_2_MAGIC, URTW_8225_ADDR_2_DATA_MAGIC1);
|
|
usb_pause_mtx(&sc->sc_mtx, 100);
|
|
urtw_8225_write(sc,
|
|
URTW_8225_ADDR_2_MAGIC, URTW_8225_ADDR_2_DATA_MAGIC2);
|
|
usb_pause_mtx(&sc->sc_mtx, 50);
|
|
error = urtw_8225_read(sc, URTW_8225_ADDR_6_MAGIC, &data32);
|
|
if (error != 0)
|
|
goto fail;
|
|
if (!(data32 & URTW_8225_ADDR_6_DATA_MAGIC2))
|
|
device_printf(sc->sc_dev, "RF calibration failed\n");
|
|
}
|
|
usb_pause_mtx(&sc->sc_mtx, 100);
|
|
|
|
urtw_8225_write(sc,
|
|
URTW_8225_ADDR_0_MAGIC, URTW_8225_ADDR_0_DATA_MAGIC6);
|
|
for (i = 0; i < 128; i++) {
|
|
urtw_8187_write_phy_ofdm(sc, 0xb, urtw_8225_agc[i]);
|
|
urtw_8187_write_phy_ofdm(sc, 0xa, (uint8_t)i + 0x80);
|
|
}
|
|
|
|
for (i = 0; i < nitems(urtw_8225v2_rf_part2); i++) {
|
|
urtw_8187_write_phy_ofdm(sc, urtw_8225v2_rf_part2[i].reg,
|
|
urtw_8225v2_rf_part2[i].val);
|
|
}
|
|
|
|
error = urtw_8225v2_setgain(sc, 4);
|
|
if (error)
|
|
goto fail;
|
|
|
|
for (i = 0; i < nitems(urtw_8225v2_rf_part3); i++) {
|
|
urtw_8187_write_phy_cck(sc, urtw_8225v2_rf_part3[i].reg,
|
|
urtw_8225v2_rf_part3[i].val);
|
|
}
|
|
|
|
urtw_write8_m(sc, URTW_TESTR, 0x0d);
|
|
|
|
error = urtw_8225v2_set_txpwrlvl(sc, 1);
|
|
if (error)
|
|
goto fail;
|
|
|
|
urtw_8187_write_phy_cck(sc, 0x10, 0x9b);
|
|
urtw_8187_write_phy_ofdm(sc, 0x26, 0x90);
|
|
|
|
/* TX ant A, 0x0 for B */
|
|
error = urtw_8185_tx_antenna(sc, 0x3);
|
|
if (error)
|
|
goto fail;
|
|
urtw_write32_m(sc, URTW_HSSI_PARA, 0x3dc00002);
|
|
|
|
error = urtw_8225_rf_set_chan(sc, 1);
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_8225v2_rf_set_chan(struct urtw_softc *sc, int chan)
|
|
{
|
|
usb_error_t error;
|
|
|
|
error = urtw_8225v2_set_txpwrlvl(sc, chan);
|
|
if (error)
|
|
goto fail;
|
|
|
|
urtw_8225_write(sc, URTW_8225_ADDR_7_MAGIC, urtw_8225_channel[chan]);
|
|
usb_pause_mtx(&sc->sc_mtx, 10);
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_8225_read(struct urtw_softc *sc, uint8_t addr, uint32_t *data)
|
|
{
|
|
int i;
|
|
int16_t bit;
|
|
uint8_t rlen = 12, wlen = 6;
|
|
uint16_t o1, o2, o3, tmp;
|
|
uint32_t d2w = ((uint32_t)(addr & 0x1f)) << 27;
|
|
uint32_t mask = 0x80000000, value = 0;
|
|
usb_error_t error;
|
|
|
|
urtw_read16_m(sc, URTW_RF_PINS_OUTPUT, &o1);
|
|
urtw_read16_m(sc, URTW_RF_PINS_ENABLE, &o2);
|
|
urtw_read16_m(sc, URTW_RF_PINS_SELECT, &o3);
|
|
urtw_write16_m(sc, URTW_RF_PINS_ENABLE, o2 | URTW_RF_PINS_MAGIC4);
|
|
urtw_write16_m(sc, URTW_RF_PINS_SELECT, o3 | URTW_RF_PINS_MAGIC4);
|
|
o1 &= ~URTW_RF_PINS_MAGIC4;
|
|
urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, o1 | URTW_BB_HOST_BANG_EN);
|
|
DELAY(5);
|
|
urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, o1);
|
|
DELAY(5);
|
|
|
|
for (i = 0; i < (wlen / 2); i++, mask = mask >> 1) {
|
|
bit = ((d2w & mask) != 0) ? 1 : 0;
|
|
|
|
urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, bit | o1);
|
|
DELAY(2);
|
|
urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, bit | o1 |
|
|
URTW_BB_HOST_BANG_CLK);
|
|
DELAY(2);
|
|
urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, bit | o1 |
|
|
URTW_BB_HOST_BANG_CLK);
|
|
DELAY(2);
|
|
mask = mask >> 1;
|
|
if (i == 2)
|
|
break;
|
|
bit = ((d2w & mask) != 0) ? 1 : 0;
|
|
urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, bit | o1 |
|
|
URTW_BB_HOST_BANG_CLK);
|
|
DELAY(2);
|
|
urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, bit | o1 |
|
|
URTW_BB_HOST_BANG_CLK);
|
|
DELAY(2);
|
|
urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, bit | o1);
|
|
DELAY(1);
|
|
}
|
|
urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, bit | o1 | URTW_BB_HOST_BANG_RW |
|
|
URTW_BB_HOST_BANG_CLK);
|
|
DELAY(2);
|
|
urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, bit | o1 | URTW_BB_HOST_BANG_RW);
|
|
DELAY(2);
|
|
urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, o1 | URTW_BB_HOST_BANG_RW);
|
|
DELAY(2);
|
|
|
|
mask = 0x800;
|
|
for (i = 0; i < rlen; i++, mask = mask >> 1) {
|
|
urtw_write16_m(sc, URTW_RF_PINS_OUTPUT,
|
|
o1 | URTW_BB_HOST_BANG_RW);
|
|
DELAY(2);
|
|
urtw_write16_m(sc, URTW_RF_PINS_OUTPUT,
|
|
o1 | URTW_BB_HOST_BANG_RW | URTW_BB_HOST_BANG_CLK);
|
|
DELAY(2);
|
|
urtw_write16_m(sc, URTW_RF_PINS_OUTPUT,
|
|
o1 | URTW_BB_HOST_BANG_RW | URTW_BB_HOST_BANG_CLK);
|
|
DELAY(2);
|
|
urtw_write16_m(sc, URTW_RF_PINS_OUTPUT,
|
|
o1 | URTW_BB_HOST_BANG_RW | URTW_BB_HOST_BANG_CLK);
|
|
DELAY(2);
|
|
|
|
urtw_read16_m(sc, URTW_RF_PINS_INPUT, &tmp);
|
|
value |= ((tmp & URTW_BB_HOST_BANG_CLK) ? mask : 0);
|
|
urtw_write16_m(sc, URTW_RF_PINS_OUTPUT,
|
|
o1 | URTW_BB_HOST_BANG_RW);
|
|
DELAY(2);
|
|
}
|
|
|
|
urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, o1 | URTW_BB_HOST_BANG_EN |
|
|
URTW_BB_HOST_BANG_RW);
|
|
DELAY(2);
|
|
|
|
urtw_write16_m(sc, URTW_RF_PINS_ENABLE, o2);
|
|
urtw_write16_m(sc, URTW_RF_PINS_SELECT, o3);
|
|
urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, URTW_RF_PINS_OUTPUT_MAGIC1);
|
|
|
|
if (data != NULL)
|
|
*data = value;
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
|
|
static usb_error_t
|
|
urtw_8225v2_set_txpwrlvl(struct urtw_softc *sc, int chan)
|
|
{
|
|
int i;
|
|
uint8_t *cck_pwrtable;
|
|
uint8_t cck_pwrlvl_max = 15, ofdm_pwrlvl_max = 25, ofdm_pwrlvl_min = 10;
|
|
uint8_t cck_pwrlvl = sc->sc_txpwr_cck[chan] & 0xff;
|
|
uint8_t ofdm_pwrlvl = sc->sc_txpwr_ofdm[chan] & 0xff;
|
|
usb_error_t error;
|
|
|
|
/* CCK power setting */
|
|
cck_pwrlvl = (cck_pwrlvl > cck_pwrlvl_max) ? cck_pwrlvl_max : cck_pwrlvl;
|
|
cck_pwrlvl += sc->sc_txpwr_cck_base;
|
|
cck_pwrlvl = (cck_pwrlvl > 35) ? 35 : cck_pwrlvl;
|
|
cck_pwrtable = (chan == 14) ? urtw_8225v2_txpwr_cck_ch14 :
|
|
urtw_8225v2_txpwr_cck;
|
|
|
|
for (i = 0; i < 8; i++)
|
|
urtw_8187_write_phy_cck(sc, 0x44 + i, cck_pwrtable[i]);
|
|
|
|
urtw_write8_m(sc, URTW_TX_GAIN_CCK,
|
|
urtw_8225v2_tx_gain_cck_ofdm[cck_pwrlvl]);
|
|
usb_pause_mtx(&sc->sc_mtx, 1);
|
|
|
|
/* OFDM power setting */
|
|
ofdm_pwrlvl = (ofdm_pwrlvl > (ofdm_pwrlvl_max - ofdm_pwrlvl_min)) ?
|
|
ofdm_pwrlvl_max : ofdm_pwrlvl + ofdm_pwrlvl_min;
|
|
ofdm_pwrlvl += sc->sc_txpwr_ofdm_base;
|
|
ofdm_pwrlvl = (ofdm_pwrlvl > 35) ? 35 : ofdm_pwrlvl;
|
|
|
|
error = urtw_8185_set_anaparam2(sc, URTW_8225_ANAPARAM2_ON);
|
|
if (error)
|
|
goto fail;
|
|
|
|
urtw_8187_write_phy_ofdm(sc, 2, 0x42);
|
|
urtw_8187_write_phy_ofdm(sc, 5, 0x0);
|
|
urtw_8187_write_phy_ofdm(sc, 6, 0x40);
|
|
urtw_8187_write_phy_ofdm(sc, 7, 0x0);
|
|
urtw_8187_write_phy_ofdm(sc, 8, 0x40);
|
|
|
|
urtw_write8_m(sc, URTW_TX_GAIN_OFDM,
|
|
urtw_8225v2_tx_gain_cck_ofdm[ofdm_pwrlvl]);
|
|
usb_pause_mtx(&sc->sc_mtx, 1);
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_8225v2_setgain(struct urtw_softc *sc, int16_t gain)
|
|
{
|
|
uint8_t *gainp;
|
|
usb_error_t error;
|
|
|
|
/* XXX for A? */
|
|
gainp = urtw_8225v2_gain_bg;
|
|
urtw_8187_write_phy_ofdm(sc, 0x0d, gainp[gain * 3]);
|
|
usb_pause_mtx(&sc->sc_mtx, 1);
|
|
urtw_8187_write_phy_ofdm(sc, 0x1b, gainp[gain * 3 + 1]);
|
|
usb_pause_mtx(&sc->sc_mtx, 1);
|
|
urtw_8187_write_phy_ofdm(sc, 0x1d, gainp[gain * 3 + 2]);
|
|
usb_pause_mtx(&sc->sc_mtx, 1);
|
|
urtw_8187_write_phy_ofdm(sc, 0x21, 0x17);
|
|
usb_pause_mtx(&sc->sc_mtx, 1);
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_8225_isv2(struct urtw_softc *sc, int *ret)
|
|
{
|
|
uint32_t data;
|
|
usb_error_t error;
|
|
|
|
*ret = 1;
|
|
|
|
urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, URTW_RF_PINS_MAGIC5);
|
|
urtw_write16_m(sc, URTW_RF_PINS_SELECT, URTW_RF_PINS_MAGIC5);
|
|
urtw_write16_m(sc, URTW_RF_PINS_ENABLE, URTW_RF_PINS_MAGIC5);
|
|
usb_pause_mtx(&sc->sc_mtx, 500);
|
|
|
|
urtw_8225_write(sc, URTW_8225_ADDR_0_MAGIC,
|
|
URTW_8225_ADDR_0_DATA_MAGIC1);
|
|
|
|
error = urtw_8225_read(sc, URTW_8225_ADDR_8_MAGIC, &data);
|
|
if (error != 0)
|
|
goto fail;
|
|
if (data != URTW_8225_ADDR_8_DATA_MAGIC1)
|
|
*ret = 0;
|
|
else {
|
|
error = urtw_8225_read(sc, URTW_8225_ADDR_9_MAGIC, &data);
|
|
if (error != 0)
|
|
goto fail;
|
|
if (data != URTW_8225_ADDR_9_DATA_MAGIC1)
|
|
*ret = 0;
|
|
}
|
|
|
|
urtw_8225_write(sc, URTW_8225_ADDR_0_MAGIC,
|
|
URTW_8225_ADDR_0_DATA_MAGIC2);
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_8225v2b_rf_init(struct urtw_softc *sc)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
unsigned int i;
|
|
uint8_t data8;
|
|
usb_error_t error;
|
|
|
|
error = urtw_set_mode(sc, URTW_EPROM_CMD_CONFIG);
|
|
if (error)
|
|
goto fail;
|
|
|
|
/*
|
|
* initialize extra registers on 8187
|
|
*/
|
|
urtw_write16_m(sc, URTW_BRSR_8187B, 0xfff);
|
|
|
|
/* retry limit */
|
|
urtw_read8_m(sc, URTW_CW_CONF, &data8);
|
|
data8 |= URTW_CW_CONF_PERPACKET_RETRY;
|
|
urtw_write8_m(sc, URTW_CW_CONF, data8);
|
|
|
|
/* TX AGC */
|
|
urtw_read8_m(sc, URTW_TX_AGC_CTL, &data8);
|
|
data8 |= URTW_TX_AGC_CTL_PERPACKET_GAIN;
|
|
urtw_write8_m(sc, URTW_TX_AGC_CTL, data8);
|
|
|
|
/* Auto Rate Fallback Control */
|
|
#define URTW_ARFR 0x1e0
|
|
urtw_write16_m(sc, URTW_ARFR, 0xfff);
|
|
urtw_read8_m(sc, URTW_RATE_FALLBACK, &data8);
|
|
urtw_write8_m(sc, URTW_RATE_FALLBACK,
|
|
data8 | URTW_RATE_FALLBACK_ENABLE);
|
|
|
|
urtw_read8_m(sc, URTW_MSR, &data8);
|
|
urtw_write8_m(sc, URTW_MSR, data8 & 0xf3);
|
|
urtw_read8_m(sc, URTW_MSR, &data8);
|
|
urtw_write8_m(sc, URTW_MSR, data8 | URTW_MSR_LINK_ENEDCA);
|
|
urtw_write8_m(sc, URTW_ACM_CONTROL, sc->sc_acmctl);
|
|
|
|
urtw_write16_m(sc, URTW_ATIM_WND, 2);
|
|
urtw_write16_m(sc, URTW_BEACON_INTERVAL, 100);
|
|
#define URTW_FEMR_FOR_8187B 0x1d4
|
|
urtw_write16_m(sc, URTW_FEMR_FOR_8187B, 0xffff);
|
|
|
|
/* led type */
|
|
urtw_read8_m(sc, URTW_CONFIG1, &data8);
|
|
data8 = (data8 & 0x3f) | 0x80;
|
|
urtw_write8_m(sc, URTW_CONFIG1, data8);
|
|
|
|
/* applying MAC address again. */
|
|
urtw_write32_m(sc, URTW_MAC0, ((uint32_t *)ic->ic_macaddr)[0]);
|
|
urtw_write16_m(sc, URTW_MAC4, ((uint32_t *)ic->ic_macaddr)[1] & 0xffff);
|
|
|
|
error = urtw_set_mode(sc, URTW_EPROM_CMD_NORMAL);
|
|
if (error)
|
|
goto fail;
|
|
|
|
urtw_write8_m(sc, URTW_WPA_CONFIG, 0);
|
|
|
|
/*
|
|
* MAC configuration
|
|
*/
|
|
for (i = 0; i < nitems(urtw_8225v2b_rf_part1); i++)
|
|
urtw_write8_m(sc, urtw_8225v2b_rf_part1[i].reg,
|
|
urtw_8225v2b_rf_part1[i].val);
|
|
urtw_write16_m(sc, URTW_TID_AC_MAP, 0xfa50);
|
|
urtw_write16_m(sc, URTW_INT_MIG, 0x0000);
|
|
urtw_write32_m(sc, 0x1f0, 0);
|
|
urtw_write32_m(sc, 0x1f4, 0);
|
|
urtw_write8_m(sc, 0x1f8, 0);
|
|
urtw_write32_m(sc, URTW_RF_TIMING, 0x4001);
|
|
|
|
#define URTW_RFSW_CTRL 0x272
|
|
urtw_write16_m(sc, URTW_RFSW_CTRL, 0x569a);
|
|
|
|
/*
|
|
* initialize PHY
|
|
*/
|
|
error = urtw_set_mode(sc, URTW_EPROM_CMD_CONFIG);
|
|
if (error)
|
|
goto fail;
|
|
urtw_read8_m(sc, URTW_CONFIG3, &data8);
|
|
urtw_write8_m(sc, URTW_CONFIG3,
|
|
data8 | URTW_CONFIG3_ANAPARAM_WRITE);
|
|
|
|
error = urtw_set_mode(sc, URTW_EPROM_CMD_NORMAL);
|
|
if (error)
|
|
goto fail;
|
|
|
|
/* setup RFE initial timing */
|
|
urtw_write16_m(sc, URTW_RF_PINS_OUTPUT, 0x0480);
|
|
urtw_write16_m(sc, URTW_RF_PINS_SELECT, 0x2488);
|
|
urtw_write16_m(sc, URTW_RF_PINS_ENABLE, 0x1fff);
|
|
usb_pause_mtx(&sc->sc_mtx, 1100);
|
|
|
|
for (i = 0; i < nitems(urtw_8225v2b_rf_part0); i++) {
|
|
urtw_8225_write(sc, urtw_8225v2b_rf_part0[i].reg,
|
|
urtw_8225v2b_rf_part0[i].val);
|
|
usb_pause_mtx(&sc->sc_mtx, 1);
|
|
}
|
|
urtw_8225_write(sc, 0x00, 0x01b7);
|
|
|
|
for (i = 0; i < 95; i++) {
|
|
urtw_8225_write(sc, URTW_8225_ADDR_1_MAGIC, (uint8_t)(i + 1));
|
|
usb_pause_mtx(&sc->sc_mtx, 1);
|
|
urtw_8225_write(sc, URTW_8225_ADDR_2_MAGIC,
|
|
urtw_8225v2b_rxgain[i]);
|
|
usb_pause_mtx(&sc->sc_mtx, 1);
|
|
}
|
|
|
|
urtw_8225_write(sc, URTW_8225_ADDR_3_MAGIC, 0x080);
|
|
usb_pause_mtx(&sc->sc_mtx, 1);
|
|
urtw_8225_write(sc, URTW_8225_ADDR_5_MAGIC, 0x004);
|
|
usb_pause_mtx(&sc->sc_mtx, 1);
|
|
urtw_8225_write(sc, URTW_8225_ADDR_0_MAGIC, 0x0b7);
|
|
usb_pause_mtx(&sc->sc_mtx, 1);
|
|
usb_pause_mtx(&sc->sc_mtx, 3000);
|
|
urtw_8225_write(sc, URTW_8225_ADDR_2_MAGIC, 0xc4d);
|
|
usb_pause_mtx(&sc->sc_mtx, 2000);
|
|
urtw_8225_write(sc, URTW_8225_ADDR_2_MAGIC, 0x44d);
|
|
usb_pause_mtx(&sc->sc_mtx, 1);
|
|
urtw_8225_write(sc, URTW_8225_ADDR_0_MAGIC, 0x2bf);
|
|
usb_pause_mtx(&sc->sc_mtx, 1);
|
|
|
|
urtw_write8_m(sc, URTW_TX_GAIN_CCK, 0x03);
|
|
urtw_write8_m(sc, URTW_TX_GAIN_OFDM, 0x07);
|
|
urtw_write8_m(sc, URTW_TX_ANTENNA, 0x03);
|
|
|
|
urtw_8187_write_phy_ofdm(sc, 0x80, 0x12);
|
|
for (i = 0; i < 128; i++) {
|
|
uint32_t addr, data;
|
|
|
|
data = (urtw_8225z2_agc[i] << 8) | 0x0000008f;
|
|
addr = ((i + 0x80) << 8) | 0x0000008e;
|
|
|
|
urtw_8187_write_phy_ofdm(sc, data & 0x7f, (data >> 8) & 0xff);
|
|
urtw_8187_write_phy_ofdm(sc, addr & 0x7f, (addr >> 8) & 0xff);
|
|
urtw_8187_write_phy_ofdm(sc, 0x0e, 0x00);
|
|
}
|
|
urtw_8187_write_phy_ofdm(sc, 0x80, 0x10);
|
|
|
|
for (i = 0; i < nitems(urtw_8225v2b_rf_part2); i++)
|
|
urtw_8187_write_phy_ofdm(sc, i, urtw_8225v2b_rf_part2[i].val);
|
|
|
|
urtw_write32_m(sc, URTW_8187B_AC_VO, (7 << 12) | (3 << 8) | 0x1c);
|
|
urtw_write32_m(sc, URTW_8187B_AC_VI, (7 << 12) | (3 << 8) | 0x1c);
|
|
urtw_write32_m(sc, URTW_8187B_AC_BE, (7 << 12) | (3 << 8) | 0x1c);
|
|
urtw_write32_m(sc, URTW_8187B_AC_BK, (7 << 12) | (3 << 8) | 0x1c);
|
|
|
|
urtw_8187_write_phy_ofdm(sc, 0x97, 0x46);
|
|
urtw_8187_write_phy_ofdm(sc, 0xa4, 0xb6);
|
|
urtw_8187_write_phy_ofdm(sc, 0x85, 0xfc);
|
|
urtw_8187_write_phy_cck(sc, 0xc1, 0x88);
|
|
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_8225v2b_rf_set_chan(struct urtw_softc *sc, int chan)
|
|
{
|
|
usb_error_t error;
|
|
|
|
error = urtw_8225v2b_set_txpwrlvl(sc, chan);
|
|
if (error)
|
|
goto fail;
|
|
|
|
urtw_8225_write(sc, URTW_8225_ADDR_7_MAGIC, urtw_8225_channel[chan]);
|
|
usb_pause_mtx(&sc->sc_mtx, 10);
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_8225v2b_set_txpwrlvl(struct urtw_softc *sc, int chan)
|
|
{
|
|
int i;
|
|
uint8_t *cck_pwrtable;
|
|
uint8_t cck_pwrlvl_max = 15;
|
|
uint8_t cck_pwrlvl = sc->sc_txpwr_cck[chan] & 0xff;
|
|
uint8_t ofdm_pwrlvl = sc->sc_txpwr_ofdm[chan] & 0xff;
|
|
usb_error_t error;
|
|
|
|
/* CCK power setting */
|
|
cck_pwrlvl = (cck_pwrlvl > cck_pwrlvl_max) ?
|
|
((sc->sc_flags & URTW_RTL8187B_REV_B) ? cck_pwrlvl_max : 22) :
|
|
(cck_pwrlvl + ((sc->sc_flags & URTW_RTL8187B_REV_B) ? 0 : 7));
|
|
cck_pwrlvl += sc->sc_txpwr_cck_base;
|
|
cck_pwrlvl = (cck_pwrlvl > 35) ? 35 : cck_pwrlvl;
|
|
cck_pwrtable = (chan == 14) ? urtw_8225v2b_txpwr_cck_ch14 :
|
|
urtw_8225v2b_txpwr_cck;
|
|
|
|
if (sc->sc_flags & URTW_RTL8187B_REV_B)
|
|
cck_pwrtable += (cck_pwrlvl <= 6) ? 0 :
|
|
((cck_pwrlvl <= 11) ? 8 : 16);
|
|
else
|
|
cck_pwrtable += (cck_pwrlvl <= 5) ? 0 :
|
|
((cck_pwrlvl <= 11) ? 8 : ((cck_pwrlvl <= 17) ? 16 : 24));
|
|
|
|
for (i = 0; i < 8; i++)
|
|
urtw_8187_write_phy_cck(sc, 0x44 + i, cck_pwrtable[i]);
|
|
|
|
urtw_write8_m(sc, URTW_TX_GAIN_CCK,
|
|
urtw_8225v2_tx_gain_cck_ofdm[cck_pwrlvl] << 1);
|
|
usb_pause_mtx(&sc->sc_mtx, 1);
|
|
|
|
/* OFDM power setting */
|
|
ofdm_pwrlvl = (ofdm_pwrlvl > 15) ?
|
|
((sc->sc_flags & URTW_RTL8187B_REV_B) ? 17 : 25) :
|
|
(ofdm_pwrlvl + ((sc->sc_flags & URTW_RTL8187B_REV_B) ? 2 : 10));
|
|
ofdm_pwrlvl += sc->sc_txpwr_ofdm_base;
|
|
ofdm_pwrlvl = (ofdm_pwrlvl > 35) ? 35 : ofdm_pwrlvl;
|
|
|
|
urtw_write8_m(sc, URTW_TX_GAIN_OFDM,
|
|
urtw_8225v2_tx_gain_cck_ofdm[ofdm_pwrlvl] << 1);
|
|
|
|
if (sc->sc_flags & URTW_RTL8187B_REV_B) {
|
|
if (ofdm_pwrlvl <= 11) {
|
|
urtw_8187_write_phy_ofdm(sc, 0x87, 0x60);
|
|
urtw_8187_write_phy_ofdm(sc, 0x89, 0x60);
|
|
} else {
|
|
urtw_8187_write_phy_ofdm(sc, 0x87, 0x5c);
|
|
urtw_8187_write_phy_ofdm(sc, 0x89, 0x5c);
|
|
}
|
|
} else {
|
|
if (ofdm_pwrlvl <= 11) {
|
|
urtw_8187_write_phy_ofdm(sc, 0x87, 0x5c);
|
|
urtw_8187_write_phy_ofdm(sc, 0x89, 0x5c);
|
|
} else if (ofdm_pwrlvl <= 17) {
|
|
urtw_8187_write_phy_ofdm(sc, 0x87, 0x54);
|
|
urtw_8187_write_phy_ofdm(sc, 0x89, 0x54);
|
|
} else {
|
|
urtw_8187_write_phy_ofdm(sc, 0x87, 0x50);
|
|
urtw_8187_write_phy_ofdm(sc, 0x89, 0x50);
|
|
}
|
|
}
|
|
usb_pause_mtx(&sc->sc_mtx, 1);
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_read8e(struct urtw_softc *sc, int val, uint8_t *data)
|
|
{
|
|
struct usb_device_request req;
|
|
usb_error_t error;
|
|
|
|
req.bmRequestType = UT_READ_VENDOR_DEVICE;
|
|
req.bRequest = URTW_8187_GETREGS_REQ;
|
|
USETW(req.wValue, val | 0xfe00);
|
|
USETW(req.wIndex, 0);
|
|
USETW(req.wLength, sizeof(uint8_t));
|
|
|
|
error = urtw_do_request(sc, &req, data);
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_write8e(struct urtw_softc *sc, int val, uint8_t data)
|
|
{
|
|
struct usb_device_request req;
|
|
|
|
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
|
|
req.bRequest = URTW_8187_SETREGS_REQ;
|
|
USETW(req.wValue, val | 0xfe00);
|
|
USETW(req.wIndex, 0);
|
|
USETW(req.wLength, sizeof(uint8_t));
|
|
|
|
return (urtw_do_request(sc, &req, &data));
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_8180_set_anaparam(struct urtw_softc *sc, uint32_t val)
|
|
{
|
|
uint8_t data;
|
|
usb_error_t error;
|
|
|
|
error = urtw_set_mode(sc, URTW_EPROM_CMD_CONFIG);
|
|
if (error)
|
|
goto fail;
|
|
|
|
urtw_read8_m(sc, URTW_CONFIG3, &data);
|
|
urtw_write8_m(sc, URTW_CONFIG3, data | URTW_CONFIG3_ANAPARAM_WRITE);
|
|
urtw_write32_m(sc, URTW_ANAPARAM, val);
|
|
urtw_read8_m(sc, URTW_CONFIG3, &data);
|
|
urtw_write8_m(sc, URTW_CONFIG3, data & ~URTW_CONFIG3_ANAPARAM_WRITE);
|
|
|
|
error = urtw_set_mode(sc, URTW_EPROM_CMD_NORMAL);
|
|
if (error)
|
|
goto fail;
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_8185_set_anaparam2(struct urtw_softc *sc, uint32_t val)
|
|
{
|
|
uint8_t data;
|
|
usb_error_t error;
|
|
|
|
error = urtw_set_mode(sc, URTW_EPROM_CMD_CONFIG);
|
|
if (error)
|
|
goto fail;
|
|
|
|
urtw_read8_m(sc, URTW_CONFIG3, &data);
|
|
urtw_write8_m(sc, URTW_CONFIG3, data | URTW_CONFIG3_ANAPARAM_WRITE);
|
|
urtw_write32_m(sc, URTW_ANAPARAM2, val);
|
|
urtw_read8_m(sc, URTW_CONFIG3, &data);
|
|
urtw_write8_m(sc, URTW_CONFIG3, data & ~URTW_CONFIG3_ANAPARAM_WRITE);
|
|
|
|
error = urtw_set_mode(sc, URTW_EPROM_CMD_NORMAL);
|
|
if (error)
|
|
goto fail;
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_intr_enable(struct urtw_softc *sc)
|
|
{
|
|
usb_error_t error;
|
|
|
|
urtw_write16_m(sc, URTW_INTR_MASK, 0xffff);
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_intr_disable(struct urtw_softc *sc)
|
|
{
|
|
usb_error_t error;
|
|
|
|
urtw_write16_m(sc, URTW_INTR_MASK, 0);
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_reset(struct urtw_softc *sc)
|
|
{
|
|
uint8_t data;
|
|
usb_error_t error;
|
|
|
|
error = urtw_8180_set_anaparam(sc, URTW_8225_ANAPARAM_ON);
|
|
if (error)
|
|
goto fail;
|
|
error = urtw_8185_set_anaparam2(sc, URTW_8225_ANAPARAM2_ON);
|
|
if (error)
|
|
goto fail;
|
|
|
|
error = urtw_intr_disable(sc);
|
|
if (error)
|
|
goto fail;
|
|
usb_pause_mtx(&sc->sc_mtx, 100);
|
|
|
|
error = urtw_write8e(sc, 0x18, 0x10);
|
|
if (error != 0)
|
|
goto fail;
|
|
error = urtw_write8e(sc, 0x18, 0x11);
|
|
if (error != 0)
|
|
goto fail;
|
|
error = urtw_write8e(sc, 0x18, 0x00);
|
|
if (error != 0)
|
|
goto fail;
|
|
usb_pause_mtx(&sc->sc_mtx, 100);
|
|
|
|
urtw_read8_m(sc, URTW_CMD, &data);
|
|
data = (data & 0x2) | URTW_CMD_RST;
|
|
urtw_write8_m(sc, URTW_CMD, data);
|
|
usb_pause_mtx(&sc->sc_mtx, 100);
|
|
|
|
urtw_read8_m(sc, URTW_CMD, &data);
|
|
if (data & URTW_CMD_RST) {
|
|
device_printf(sc->sc_dev, "reset timeout\n");
|
|
goto fail;
|
|
}
|
|
|
|
error = urtw_set_mode(sc, URTW_EPROM_CMD_LOAD);
|
|
if (error)
|
|
goto fail;
|
|
usb_pause_mtx(&sc->sc_mtx, 100);
|
|
|
|
error = urtw_8180_set_anaparam(sc, URTW_8225_ANAPARAM_ON);
|
|
if (error)
|
|
goto fail;
|
|
error = urtw_8185_set_anaparam2(sc, URTW_8225_ANAPARAM2_ON);
|
|
if (error)
|
|
goto fail;
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_led_ctl(struct urtw_softc *sc, int mode)
|
|
{
|
|
usb_error_t error = 0;
|
|
|
|
switch (sc->sc_strategy) {
|
|
case URTW_SW_LED_MODE0:
|
|
error = urtw_led_mode0(sc, mode);
|
|
break;
|
|
case URTW_SW_LED_MODE1:
|
|
error = urtw_led_mode1(sc, mode);
|
|
break;
|
|
case URTW_SW_LED_MODE2:
|
|
error = urtw_led_mode2(sc, mode);
|
|
break;
|
|
case URTW_SW_LED_MODE3:
|
|
error = urtw_led_mode3(sc, mode);
|
|
break;
|
|
default:
|
|
DPRINTF(sc, URTW_DEBUG_STATE,
|
|
"unsupported LED mode %d\n", sc->sc_strategy);
|
|
error = USB_ERR_INVAL;
|
|
break;
|
|
}
|
|
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_led_mode0(struct urtw_softc *sc, int mode)
|
|
{
|
|
|
|
switch (mode) {
|
|
case URTW_LED_CTL_POWER_ON:
|
|
sc->sc_gpio_ledstate = URTW_LED_POWER_ON_BLINK;
|
|
break;
|
|
case URTW_LED_CTL_TX:
|
|
if (sc->sc_gpio_ledinprogress == 1)
|
|
return (0);
|
|
|
|
sc->sc_gpio_ledstate = URTW_LED_BLINK_NORMAL;
|
|
sc->sc_gpio_blinktime = 2;
|
|
break;
|
|
case URTW_LED_CTL_LINK:
|
|
sc->sc_gpio_ledstate = URTW_LED_ON;
|
|
break;
|
|
default:
|
|
DPRINTF(sc, URTW_DEBUG_STATE,
|
|
"unsupported LED mode 0x%x", mode);
|
|
return (USB_ERR_INVAL);
|
|
}
|
|
|
|
switch (sc->sc_gpio_ledstate) {
|
|
case URTW_LED_ON:
|
|
if (sc->sc_gpio_ledinprogress != 0)
|
|
break;
|
|
urtw_led_on(sc, URTW_LED_GPIO);
|
|
break;
|
|
case URTW_LED_BLINK_NORMAL:
|
|
if (sc->sc_gpio_ledinprogress != 0)
|
|
break;
|
|
sc->sc_gpio_ledinprogress = 1;
|
|
sc->sc_gpio_blinkstate = (sc->sc_gpio_ledon != 0) ?
|
|
URTW_LED_OFF : URTW_LED_ON;
|
|
usb_callout_reset(&sc->sc_led_ch, hz, urtw_led_ch, sc);
|
|
break;
|
|
case URTW_LED_POWER_ON_BLINK:
|
|
urtw_led_on(sc, URTW_LED_GPIO);
|
|
usb_pause_mtx(&sc->sc_mtx, 100);
|
|
urtw_led_off(sc, URTW_LED_GPIO);
|
|
break;
|
|
default:
|
|
DPRINTF(sc, URTW_DEBUG_STATE,
|
|
"unknown LED status 0x%x", sc->sc_gpio_ledstate);
|
|
return (USB_ERR_INVAL);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_led_mode1(struct urtw_softc *sc, int mode)
|
|
{
|
|
return (USB_ERR_INVAL);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_led_mode2(struct urtw_softc *sc, int mode)
|
|
{
|
|
return (USB_ERR_INVAL);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_led_mode3(struct urtw_softc *sc, int mode)
|
|
{
|
|
return (USB_ERR_INVAL);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_led_on(struct urtw_softc *sc, int type)
|
|
{
|
|
usb_error_t error;
|
|
|
|
if (type == URTW_LED_GPIO) {
|
|
switch (sc->sc_gpio_ledpin) {
|
|
case URTW_LED_PIN_GPIO0:
|
|
urtw_write8_m(sc, URTW_GPIO, 0x01);
|
|
urtw_write8_m(sc, URTW_GP_ENABLE, 0x00);
|
|
break;
|
|
default:
|
|
DPRINTF(sc, URTW_DEBUG_STATE,
|
|
"unsupported LED PIN type 0x%x",
|
|
sc->sc_gpio_ledpin);
|
|
error = USB_ERR_INVAL;
|
|
goto fail;
|
|
}
|
|
} else {
|
|
DPRINTF(sc, URTW_DEBUG_STATE,
|
|
"unsupported LED type 0x%x", type);
|
|
error = USB_ERR_INVAL;
|
|
goto fail;
|
|
}
|
|
|
|
sc->sc_gpio_ledon = 1;
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_led_off(struct urtw_softc *sc, int type)
|
|
{
|
|
usb_error_t error;
|
|
|
|
if (type == URTW_LED_GPIO) {
|
|
switch (sc->sc_gpio_ledpin) {
|
|
case URTW_LED_PIN_GPIO0:
|
|
urtw_write8_m(sc, URTW_GPIO, URTW_GPIO_DATA_MAGIC1);
|
|
urtw_write8_m(sc,
|
|
URTW_GP_ENABLE, URTW_GP_ENABLE_DATA_MAGIC1);
|
|
break;
|
|
default:
|
|
DPRINTF(sc, URTW_DEBUG_STATE,
|
|
"unsupported LED PIN type 0x%x",
|
|
sc->sc_gpio_ledpin);
|
|
error = USB_ERR_INVAL;
|
|
goto fail;
|
|
}
|
|
} else {
|
|
DPRINTF(sc, URTW_DEBUG_STATE,
|
|
"unsupported LED type 0x%x", type);
|
|
error = USB_ERR_INVAL;
|
|
goto fail;
|
|
}
|
|
|
|
sc->sc_gpio_ledon = 0;
|
|
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
urtw_led_ch(void *arg)
|
|
{
|
|
struct urtw_softc *sc = arg;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
|
|
ieee80211_runtask(ic, &sc->sc_led_task);
|
|
}
|
|
|
|
static void
|
|
urtw_ledtask(void *arg, int pending)
|
|
{
|
|
struct urtw_softc *sc = arg;
|
|
|
|
if (sc->sc_strategy != URTW_SW_LED_MODE0) {
|
|
DPRINTF(sc, URTW_DEBUG_STATE,
|
|
"could not process a LED strategy 0x%x",
|
|
sc->sc_strategy);
|
|
return;
|
|
}
|
|
|
|
URTW_LOCK(sc);
|
|
urtw_led_blink(sc);
|
|
URTW_UNLOCK(sc);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_led_blink(struct urtw_softc *sc)
|
|
{
|
|
uint8_t ing = 0;
|
|
usb_error_t error;
|
|
|
|
if (sc->sc_gpio_blinkstate == URTW_LED_ON)
|
|
error = urtw_led_on(sc, URTW_LED_GPIO);
|
|
else
|
|
error = urtw_led_off(sc, URTW_LED_GPIO);
|
|
sc->sc_gpio_blinktime--;
|
|
if (sc->sc_gpio_blinktime == 0)
|
|
ing = 1;
|
|
else {
|
|
if (sc->sc_gpio_ledstate != URTW_LED_BLINK_NORMAL &&
|
|
sc->sc_gpio_ledstate != URTW_LED_BLINK_SLOWLY &&
|
|
sc->sc_gpio_ledstate != URTW_LED_BLINK_CM3)
|
|
ing = 1;
|
|
}
|
|
if (ing == 1) {
|
|
if (sc->sc_gpio_ledstate == URTW_LED_ON &&
|
|
sc->sc_gpio_ledon == 0)
|
|
error = urtw_led_on(sc, URTW_LED_GPIO);
|
|
else if (sc->sc_gpio_ledstate == URTW_LED_OFF &&
|
|
sc->sc_gpio_ledon == 1)
|
|
error = urtw_led_off(sc, URTW_LED_GPIO);
|
|
|
|
sc->sc_gpio_blinktime = 0;
|
|
sc->sc_gpio_ledinprogress = 0;
|
|
return (0);
|
|
}
|
|
|
|
sc->sc_gpio_blinkstate = (sc->sc_gpio_blinkstate != URTW_LED_ON) ?
|
|
URTW_LED_ON : URTW_LED_OFF;
|
|
|
|
switch (sc->sc_gpio_ledstate) {
|
|
case URTW_LED_BLINK_NORMAL:
|
|
usb_callout_reset(&sc->sc_led_ch, hz, urtw_led_ch, sc);
|
|
break;
|
|
default:
|
|
DPRINTF(sc, URTW_DEBUG_STATE,
|
|
"unknown LED status 0x%x",
|
|
sc->sc_gpio_ledstate);
|
|
return (USB_ERR_INVAL);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_rx_enable(struct urtw_softc *sc)
|
|
{
|
|
uint8_t data;
|
|
usb_error_t error;
|
|
|
|
usbd_transfer_start((sc->sc_flags & URTW_RTL8187B) ?
|
|
sc->sc_xfer[URTW_8187B_BULK_RX] : sc->sc_xfer[URTW_8187L_BULK_RX]);
|
|
|
|
error = urtw_rx_setconf(sc);
|
|
if (error != 0)
|
|
goto fail;
|
|
|
|
if ((sc->sc_flags & URTW_RTL8187B) == 0) {
|
|
urtw_read8_m(sc, URTW_CMD, &data);
|
|
urtw_write8_m(sc, URTW_CMD, data | URTW_CMD_RX_ENABLE);
|
|
}
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_tx_enable(struct urtw_softc *sc)
|
|
{
|
|
uint8_t data8;
|
|
uint32_t data;
|
|
usb_error_t error;
|
|
|
|
if (sc->sc_flags & URTW_RTL8187B) {
|
|
urtw_read32_m(sc, URTW_TX_CONF, &data);
|
|
data &= ~URTW_TX_LOOPBACK_MASK;
|
|
data &= ~(URTW_TX_DPRETRY_MASK | URTW_TX_RTSRETRY_MASK);
|
|
data &= ~(URTW_TX_NOCRC | URTW_TX_MXDMA_MASK);
|
|
data &= ~URTW_TX_SWPLCPLEN;
|
|
data |= URTW_TX_HW_SEQNUM | URTW_TX_DISREQQSIZE |
|
|
(7 << 8) | /* short retry limit */
|
|
(7 << 0) | /* long retry limit */
|
|
(7 << 21); /* MAX TX DMA */
|
|
urtw_write32_m(sc, URTW_TX_CONF, data);
|
|
|
|
urtw_read8_m(sc, URTW_MSR, &data8);
|
|
data8 |= URTW_MSR_LINK_ENEDCA;
|
|
urtw_write8_m(sc, URTW_MSR, data8);
|
|
return (error);
|
|
}
|
|
|
|
urtw_read8_m(sc, URTW_CW_CONF, &data8);
|
|
data8 &= ~(URTW_CW_CONF_PERPACKET_CW | URTW_CW_CONF_PERPACKET_RETRY);
|
|
urtw_write8_m(sc, URTW_CW_CONF, data8);
|
|
|
|
urtw_read8_m(sc, URTW_TX_AGC_CTL, &data8);
|
|
data8 &= ~URTW_TX_AGC_CTL_PERPACKET_GAIN;
|
|
data8 &= ~URTW_TX_AGC_CTL_PERPACKET_ANTSEL;
|
|
data8 &= ~URTW_TX_AGC_CTL_FEEDBACK_ANT;
|
|
urtw_write8_m(sc, URTW_TX_AGC_CTL, data8);
|
|
|
|
urtw_read32_m(sc, URTW_TX_CONF, &data);
|
|
data &= ~URTW_TX_LOOPBACK_MASK;
|
|
data |= URTW_TX_LOOPBACK_NONE;
|
|
data &= ~(URTW_TX_DPRETRY_MASK | URTW_TX_RTSRETRY_MASK);
|
|
data |= sc->sc_tx_retry << URTW_TX_DPRETRY_SHIFT;
|
|
data |= sc->sc_rts_retry << URTW_TX_RTSRETRY_SHIFT;
|
|
data &= ~(URTW_TX_NOCRC | URTW_TX_MXDMA_MASK);
|
|
data |= URTW_TX_MXDMA_2048 | URTW_TX_CWMIN | URTW_TX_DISCW;
|
|
data &= ~URTW_TX_SWPLCPLEN;
|
|
data |= URTW_TX_NOICV;
|
|
urtw_write32_m(sc, URTW_TX_CONF, data);
|
|
|
|
urtw_read8_m(sc, URTW_CMD, &data8);
|
|
urtw_write8_m(sc, URTW_CMD, data8 | URTW_CMD_TX_ENABLE);
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static usb_error_t
|
|
urtw_rx_setconf(struct urtw_softc *sc)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
uint32_t data;
|
|
usb_error_t error;
|
|
|
|
urtw_read32_m(sc, URTW_RX, &data);
|
|
data = data &~ URTW_RX_FILTER_MASK;
|
|
if (sc->sc_flags & URTW_RTL8187B) {
|
|
data = data | URTW_RX_FILTER_MNG | URTW_RX_FILTER_DATA |
|
|
URTW_RX_FILTER_MCAST | URTW_RX_FILTER_BCAST |
|
|
URTW_RX_FILTER_NICMAC | URTW_RX_CHECK_BSSID |
|
|
URTW_RX_FIFO_THRESHOLD_NONE |
|
|
URTW_MAX_RX_DMA_2048 |
|
|
URTW_RX_AUTORESETPHY | URTW_RCR_ONLYERLPKT;
|
|
} else {
|
|
data = data | URTW_RX_FILTER_MNG | URTW_RX_FILTER_DATA;
|
|
data = data | URTW_RX_FILTER_BCAST | URTW_RX_FILTER_MCAST;
|
|
|
|
if (ic->ic_opmode == IEEE80211_M_MONITOR) {
|
|
data = data | URTW_RX_FILTER_ICVERR;
|
|
data = data | URTW_RX_FILTER_PWR;
|
|
}
|
|
if (sc->sc_crcmon == 1 && ic->ic_opmode == IEEE80211_M_MONITOR)
|
|
data = data | URTW_RX_FILTER_CRCERR;
|
|
|
|
if (ic->ic_opmode == IEEE80211_M_MONITOR ||
|
|
ic->ic_promisc > 0 || ic->ic_allmulti > 0) {
|
|
data = data | URTW_RX_FILTER_ALLMAC;
|
|
} else {
|
|
data = data | URTW_RX_FILTER_NICMAC;
|
|
data = data | URTW_RX_CHECK_BSSID;
|
|
}
|
|
|
|
data = data &~ URTW_RX_FIFO_THRESHOLD_MASK;
|
|
data = data | URTW_RX_FIFO_THRESHOLD_NONE |
|
|
URTW_RX_AUTORESETPHY;
|
|
data = data &~ URTW_MAX_RX_DMA_MASK;
|
|
data = data | URTW_MAX_RX_DMA_2048 | URTW_RCR_ONLYERLPKT;
|
|
}
|
|
|
|
urtw_write32_m(sc, URTW_RX, data);
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static struct mbuf *
|
|
urtw_rxeof(struct usb_xfer *xfer, struct urtw_data *data, int *rssi_p,
|
|
int8_t *nf_p)
|
|
{
|
|
int actlen, flen, rssi;
|
|
struct ieee80211_frame *wh;
|
|
struct mbuf *m, *mnew;
|
|
struct urtw_softc *sc = data->sc;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
uint8_t noise = 0, rate;
|
|
|
|
usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
|
|
|
|
if (actlen < (int)URTW_MIN_RXBUFSZ) {
|
|
counter_u64_add(ic->ic_ierrors, 1);
|
|
return (NULL);
|
|
}
|
|
|
|
if (sc->sc_flags & URTW_RTL8187B) {
|
|
struct urtw_8187b_rxhdr *rx;
|
|
|
|
rx = (struct urtw_8187b_rxhdr *)(data->buf +
|
|
(actlen - (sizeof(struct urtw_8187b_rxhdr))));
|
|
flen = le32toh(rx->flag) & 0xfff;
|
|
if (flen > actlen) {
|
|
counter_u64_add(ic->ic_ierrors, 1);
|
|
return (NULL);
|
|
}
|
|
rate = (le32toh(rx->flag) >> URTW_RX_FLAG_RXRATE_SHIFT) & 0xf;
|
|
/* XXX correct? */
|
|
rssi = rx->rssi & URTW_RX_RSSI_MASK;
|
|
noise = rx->noise;
|
|
} else {
|
|
struct urtw_8187l_rxhdr *rx;
|
|
|
|
rx = (struct urtw_8187l_rxhdr *)(data->buf +
|
|
(actlen - (sizeof(struct urtw_8187l_rxhdr))));
|
|
flen = le32toh(rx->flag) & 0xfff;
|
|
if (flen > actlen) {
|
|
counter_u64_add(ic->ic_ierrors, 1);
|
|
return (NULL);
|
|
}
|
|
|
|
rate = (le32toh(rx->flag) >> URTW_RX_FLAG_RXRATE_SHIFT) & 0xf;
|
|
/* XXX correct? */
|
|
rssi = rx->rssi & URTW_RX_8187L_RSSI_MASK;
|
|
noise = rx->noise;
|
|
}
|
|
|
|
mnew = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR);
|
|
if (mnew == NULL) {
|
|
counter_u64_add(ic->ic_ierrors, 1);
|
|
return (NULL);
|
|
}
|
|
|
|
m = data->m;
|
|
data->m = mnew;
|
|
data->buf = mtod(mnew, uint8_t *);
|
|
|
|
/* finalize mbuf */
|
|
m->m_pkthdr.len = m->m_len = flen - IEEE80211_CRC_LEN;
|
|
|
|
if (ieee80211_radiotap_active(ic)) {
|
|
struct urtw_rx_radiotap_header *tap = &sc->sc_rxtap;
|
|
|
|
/* XXX Are variables correct? */
|
|
tap->wr_chan_freq = htole16(ic->ic_curchan->ic_freq);
|
|
tap->wr_chan_flags = htole16(ic->ic_curchan->ic_flags);
|
|
tap->wr_dbm_antsignal = (int8_t)rssi;
|
|
}
|
|
|
|
wh = mtod(m, struct ieee80211_frame *);
|
|
if ((wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) == IEEE80211_FC0_TYPE_DATA)
|
|
sc->sc_currate = (rate > 0) ? rate : sc->sc_currate;
|
|
|
|
*rssi_p = rssi;
|
|
*nf_p = noise; /* XXX correct? */
|
|
|
|
return (m);
|
|
}
|
|
|
|
static void
|
|
urtw_bulk_rx_callback(struct usb_xfer *xfer, usb_error_t error)
|
|
{
|
|
struct urtw_softc *sc = usbd_xfer_softc(xfer);
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ieee80211_frame *wh;
|
|
struct ieee80211_node *ni;
|
|
struct mbuf *m = NULL;
|
|
struct urtw_data *data;
|
|
int8_t nf = -95;
|
|
int rssi = 1;
|
|
|
|
URTW_ASSERT_LOCKED(sc);
|
|
|
|
switch (USB_GET_STATE(xfer)) {
|
|
case USB_ST_TRANSFERRED:
|
|
data = STAILQ_FIRST(&sc->sc_rx_active);
|
|
if (data == NULL)
|
|
goto setup;
|
|
STAILQ_REMOVE_HEAD(&sc->sc_rx_active, next);
|
|
m = urtw_rxeof(xfer, data, &rssi, &nf);
|
|
STAILQ_INSERT_TAIL(&sc->sc_rx_inactive, data, next);
|
|
/* FALLTHROUGH */
|
|
case USB_ST_SETUP:
|
|
setup:
|
|
data = STAILQ_FIRST(&sc->sc_rx_inactive);
|
|
if (data == NULL) {
|
|
KASSERT(m == NULL, ("mbuf isn't NULL"));
|
|
return;
|
|
}
|
|
STAILQ_REMOVE_HEAD(&sc->sc_rx_inactive, next);
|
|
STAILQ_INSERT_TAIL(&sc->sc_rx_active, data, next);
|
|
usbd_xfer_set_frame_data(xfer, 0, data->buf,
|
|
usbd_xfer_max_len(xfer));
|
|
usbd_transfer_submit(xfer);
|
|
|
|
/*
|
|
* To avoid LOR we should unlock our private mutex here to call
|
|
* ieee80211_input() because here is at the end of a USB
|
|
* callback and safe to unlock.
|
|
*/
|
|
URTW_UNLOCK(sc);
|
|
if (m != NULL) {
|
|
wh = mtod(m, struct ieee80211_frame *);
|
|
ni = ieee80211_find_rxnode(ic,
|
|
(struct ieee80211_frame_min *)wh);
|
|
if (ni != NULL) {
|
|
(void) ieee80211_input(ni, m, rssi, nf);
|
|
/* node is no longer needed */
|
|
ieee80211_free_node(ni);
|
|
} else
|
|
(void) ieee80211_input_all(ic, m, rssi, nf);
|
|
m = NULL;
|
|
}
|
|
URTW_LOCK(sc);
|
|
break;
|
|
default:
|
|
/* needs it to the inactive queue due to a error. */
|
|
data = STAILQ_FIRST(&sc->sc_rx_active);
|
|
if (data != NULL) {
|
|
STAILQ_REMOVE_HEAD(&sc->sc_rx_active, next);
|
|
STAILQ_INSERT_TAIL(&sc->sc_rx_inactive, data, next);
|
|
}
|
|
if (error != USB_ERR_CANCELLED) {
|
|
usbd_xfer_set_stall(xfer);
|
|
counter_u64_add(ic->ic_ierrors, 1);
|
|
goto setup;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
#define URTW_STATUS_TYPE_TXCLOSE 1
|
|
#define URTW_STATUS_TYPE_BEACON_INTR 0
|
|
|
|
static void
|
|
urtw_txstatus_eof(struct usb_xfer *xfer)
|
|
{
|
|
struct urtw_softc *sc = usbd_xfer_softc(xfer);
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
int actlen, type, pktretry, seq;
|
|
uint64_t val;
|
|
|
|
usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
|
|
|
|
if (actlen != sizeof(uint64_t))
|
|
return;
|
|
|
|
val = le64toh(sc->sc_txstatus);
|
|
type = (val >> 30) & 0x3;
|
|
if (type == URTW_STATUS_TYPE_TXCLOSE) {
|
|
pktretry = val & 0xff;
|
|
seq = (val >> 16) & 0xff;
|
|
if (pktretry == URTW_TX_MAXRETRY)
|
|
counter_u64_add(ic->ic_oerrors, 1);
|
|
DPRINTF(sc, URTW_DEBUG_TXSTATUS, "pktretry %d seq %#x\n",
|
|
pktretry, seq);
|
|
}
|
|
}
|
|
|
|
static void
|
|
urtw_bulk_tx_status_callback(struct usb_xfer *xfer, usb_error_t error)
|
|
{
|
|
struct urtw_softc *sc = usbd_xfer_softc(xfer);
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
void *dma_buf = usbd_xfer_get_frame_buffer(xfer, 0);
|
|
|
|
URTW_ASSERT_LOCKED(sc);
|
|
|
|
switch (USB_GET_STATE(xfer)) {
|
|
case USB_ST_TRANSFERRED:
|
|
urtw_txstatus_eof(xfer);
|
|
/* FALLTHROUGH */
|
|
case USB_ST_SETUP:
|
|
setup:
|
|
memcpy(dma_buf, &sc->sc_txstatus, sizeof(uint64_t));
|
|
usbd_xfer_set_frame_len(xfer, 0, sizeof(uint64_t));
|
|
usbd_transfer_submit(xfer);
|
|
break;
|
|
default:
|
|
if (error != USB_ERR_CANCELLED) {
|
|
usbd_xfer_set_stall(xfer);
|
|
counter_u64_add(ic->ic_ierrors, 1);
|
|
goto setup;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
urtw_txeof(struct usb_xfer *xfer, struct urtw_data *data)
|
|
{
|
|
struct urtw_softc *sc = usbd_xfer_softc(xfer);
|
|
|
|
URTW_ASSERT_LOCKED(sc);
|
|
|
|
if (data->m) {
|
|
/* XXX status? */
|
|
ieee80211_tx_complete(data->ni, data->m, 0);
|
|
data->m = NULL;
|
|
data->ni = NULL;
|
|
}
|
|
sc->sc_txtimer = 0;
|
|
}
|
|
|
|
static void
|
|
urtw_bulk_tx_callback(struct usb_xfer *xfer, usb_error_t error)
|
|
{
|
|
struct urtw_softc *sc = usbd_xfer_softc(xfer);
|
|
struct urtw_data *data;
|
|
|
|
URTW_ASSERT_LOCKED(sc);
|
|
|
|
switch (USB_GET_STATE(xfer)) {
|
|
case USB_ST_TRANSFERRED:
|
|
data = STAILQ_FIRST(&sc->sc_tx_active);
|
|
if (data == NULL)
|
|
goto setup;
|
|
STAILQ_REMOVE_HEAD(&sc->sc_tx_active, next);
|
|
urtw_txeof(xfer, data);
|
|
STAILQ_INSERT_TAIL(&sc->sc_tx_inactive, data, next);
|
|
/* FALLTHROUGH */
|
|
case USB_ST_SETUP:
|
|
setup:
|
|
data = STAILQ_FIRST(&sc->sc_tx_pending);
|
|
if (data == NULL) {
|
|
DPRINTF(sc, URTW_DEBUG_XMIT,
|
|
"%s: empty pending queue\n", __func__);
|
|
return;
|
|
}
|
|
STAILQ_REMOVE_HEAD(&sc->sc_tx_pending, next);
|
|
STAILQ_INSERT_TAIL(&sc->sc_tx_active, data, next);
|
|
|
|
usbd_xfer_set_frame_data(xfer, 0, data->buf, data->buflen);
|
|
usbd_transfer_submit(xfer);
|
|
|
|
urtw_start(sc);
|
|
break;
|
|
default:
|
|
data = STAILQ_FIRST(&sc->sc_tx_active);
|
|
if (data == NULL)
|
|
goto setup;
|
|
if (data->ni != NULL) {
|
|
if_inc_counter(data->ni->ni_vap->iv_ifp,
|
|
IFCOUNTER_OERRORS, 1);
|
|
ieee80211_free_node(data->ni);
|
|
data->ni = NULL;
|
|
}
|
|
if (error != USB_ERR_CANCELLED) {
|
|
usbd_xfer_set_stall(xfer);
|
|
goto setup;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
static struct urtw_data *
|
|
_urtw_getbuf(struct urtw_softc *sc)
|
|
{
|
|
struct urtw_data *bf;
|
|
|
|
bf = STAILQ_FIRST(&sc->sc_tx_inactive);
|
|
if (bf != NULL)
|
|
STAILQ_REMOVE_HEAD(&sc->sc_tx_inactive, next);
|
|
else
|
|
bf = NULL;
|
|
if (bf == NULL)
|
|
DPRINTF(sc, URTW_DEBUG_XMIT, "%s: %s\n", __func__,
|
|
"out of xmit buffers");
|
|
return (bf);
|
|
}
|
|
|
|
static struct urtw_data *
|
|
urtw_getbuf(struct urtw_softc *sc)
|
|
{
|
|
struct urtw_data *bf;
|
|
|
|
URTW_ASSERT_LOCKED(sc);
|
|
|
|
bf = _urtw_getbuf(sc);
|
|
if (bf == NULL)
|
|
DPRINTF(sc, URTW_DEBUG_XMIT, "%s: stop queue\n", __func__);
|
|
return (bf);
|
|
}
|
|
|
|
static int
|
|
urtw_isbmode(uint16_t rate)
|
|
{
|
|
|
|
return ((rate <= 22 && rate != 12 && rate != 18) ||
|
|
rate == 44) ? (1) : (0);
|
|
}
|
|
|
|
static uint16_t
|
|
urtw_rate2dbps(uint16_t rate)
|
|
{
|
|
|
|
switch(rate) {
|
|
case 12:
|
|
case 18:
|
|
case 24:
|
|
case 36:
|
|
case 48:
|
|
case 72:
|
|
case 96:
|
|
case 108:
|
|
return (rate * 2);
|
|
default:
|
|
break;
|
|
}
|
|
return (24);
|
|
}
|
|
|
|
static int
|
|
urtw_compute_txtime(uint16_t framelen, uint16_t rate,
|
|
uint8_t ismgt, uint8_t isshort)
|
|
{
|
|
uint16_t ceiling, frametime, n_dbps;
|
|
|
|
if (urtw_isbmode(rate)) {
|
|
if (ismgt || !isshort || rate == 2)
|
|
frametime = (uint16_t)(144 + 48 +
|
|
(framelen * 8 / (rate / 2)));
|
|
else
|
|
frametime = (uint16_t)(72 + 24 +
|
|
(framelen * 8 / (rate / 2)));
|
|
if ((framelen * 8 % (rate / 2)) != 0)
|
|
frametime++;
|
|
} else {
|
|
n_dbps = urtw_rate2dbps(rate);
|
|
ceiling = (16 + 8 * framelen + 6) / n_dbps
|
|
+ (((16 + 8 * framelen + 6) % n_dbps) ? 1 : 0);
|
|
frametime = (uint16_t)(16 + 4 + 4 * ceiling + 6);
|
|
}
|
|
return (frametime);
|
|
}
|
|
|
|
/*
|
|
* Callback from the 802.11 layer to update the
|
|
* slot time based on the current setting.
|
|
*/
|
|
static void
|
|
urtw_updateslot(struct ieee80211com *ic)
|
|
{
|
|
struct urtw_softc *sc = ic->ic_softc;
|
|
|
|
ieee80211_runtask(ic, &sc->sc_updateslot_task);
|
|
}
|
|
|
|
static void
|
|
urtw_updateslottask(void *arg, int pending)
|
|
{
|
|
struct urtw_softc *sc = arg;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
int error;
|
|
|
|
URTW_LOCK(sc);
|
|
if ((sc->sc_flags & URTW_RUNNING) == 0) {
|
|
URTW_UNLOCK(sc);
|
|
return;
|
|
}
|
|
if (sc->sc_flags & URTW_RTL8187B) {
|
|
urtw_write8_m(sc, URTW_SIFS, 0x22);
|
|
if (IEEE80211_IS_CHAN_ANYG(ic->ic_curchan))
|
|
urtw_write8_m(sc, URTW_SLOT, IEEE80211_DUR_SHSLOT);
|
|
else
|
|
urtw_write8_m(sc, URTW_SLOT, IEEE80211_DUR_SLOT);
|
|
urtw_write8_m(sc, URTW_8187B_EIFS, 0x5b);
|
|
urtw_write8_m(sc, URTW_CARRIER_SCOUNT, 0x5b);
|
|
} else {
|
|
urtw_write8_m(sc, URTW_SIFS, 0x22);
|
|
if (sc->sc_state == IEEE80211_S_ASSOC &&
|
|
ic->ic_flags & IEEE80211_F_SHSLOT)
|
|
urtw_write8_m(sc, URTW_SLOT, IEEE80211_DUR_SHSLOT);
|
|
else
|
|
urtw_write8_m(sc, URTW_SLOT, IEEE80211_DUR_SLOT);
|
|
if (IEEE80211_IS_CHAN_ANYG(ic->ic_curchan)) {
|
|
urtw_write8_m(sc, URTW_DIFS, 0x14);
|
|
urtw_write8_m(sc, URTW_EIFS, 0x5b - 0x14);
|
|
urtw_write8_m(sc, URTW_CW_VAL, 0x73);
|
|
} else {
|
|
urtw_write8_m(sc, URTW_DIFS, 0x24);
|
|
urtw_write8_m(sc, URTW_EIFS, 0x5b - 0x24);
|
|
urtw_write8_m(sc, URTW_CW_VAL, 0xa5);
|
|
}
|
|
}
|
|
fail:
|
|
URTW_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
urtw_sysctl_node(struct urtw_softc *sc)
|
|
{
|
|
#define URTW_SYSCTL_STAT_ADD32(c, h, n, p, d) \
|
|
SYSCTL_ADD_UINT(c, h, OID_AUTO, n, CTLFLAG_RD, p, 0, d)
|
|
struct sysctl_ctx_list *ctx;
|
|
struct sysctl_oid_list *child, *parent;
|
|
struct sysctl_oid *tree;
|
|
struct urtw_stats *stats = &sc->sc_stats;
|
|
|
|
ctx = device_get_sysctl_ctx(sc->sc_dev);
|
|
child = SYSCTL_CHILDREN(device_get_sysctl_tree(sc->sc_dev));
|
|
|
|
tree = SYSCTL_ADD_NODE(ctx, child, OID_AUTO, "stats", CTLFLAG_RD,
|
|
NULL, "URTW statistics");
|
|
parent = SYSCTL_CHILDREN(tree);
|
|
|
|
/* Tx statistics. */
|
|
tree = SYSCTL_ADD_NODE(ctx, parent, OID_AUTO, "tx", CTLFLAG_RD,
|
|
NULL, "Tx MAC statistics");
|
|
child = SYSCTL_CHILDREN(tree);
|
|
URTW_SYSCTL_STAT_ADD32(ctx, child, "1m", &stats->txrates[0],
|
|
"1 Mbit/s");
|
|
URTW_SYSCTL_STAT_ADD32(ctx, child, "2m", &stats->txrates[1],
|
|
"2 Mbit/s");
|
|
URTW_SYSCTL_STAT_ADD32(ctx, child, "5.5m", &stats->txrates[2],
|
|
"5.5 Mbit/s");
|
|
URTW_SYSCTL_STAT_ADD32(ctx, child, "6m", &stats->txrates[4],
|
|
"6 Mbit/s");
|
|
URTW_SYSCTL_STAT_ADD32(ctx, child, "9m", &stats->txrates[5],
|
|
"9 Mbit/s");
|
|
URTW_SYSCTL_STAT_ADD32(ctx, child, "11m", &stats->txrates[3],
|
|
"11 Mbit/s");
|
|
URTW_SYSCTL_STAT_ADD32(ctx, child, "12m", &stats->txrates[6],
|
|
"12 Mbit/s");
|
|
URTW_SYSCTL_STAT_ADD32(ctx, child, "18m", &stats->txrates[7],
|
|
"18 Mbit/s");
|
|
URTW_SYSCTL_STAT_ADD32(ctx, child, "24m", &stats->txrates[8],
|
|
"24 Mbit/s");
|
|
URTW_SYSCTL_STAT_ADD32(ctx, child, "36m", &stats->txrates[9],
|
|
"36 Mbit/s");
|
|
URTW_SYSCTL_STAT_ADD32(ctx, child, "48m", &stats->txrates[10],
|
|
"48 Mbit/s");
|
|
URTW_SYSCTL_STAT_ADD32(ctx, child, "54m", &stats->txrates[11],
|
|
"54 Mbit/s");
|
|
#undef URTW_SYSCTL_STAT_ADD32
|
|
}
|
|
|
|
static device_method_t urtw_methods[] = {
|
|
DEVMETHOD(device_probe, urtw_match),
|
|
DEVMETHOD(device_attach, urtw_attach),
|
|
DEVMETHOD(device_detach, urtw_detach),
|
|
DEVMETHOD_END
|
|
};
|
|
static driver_t urtw_driver = {
|
|
.name = "urtw",
|
|
.methods = urtw_methods,
|
|
.size = sizeof(struct urtw_softc)
|
|
};
|
|
static devclass_t urtw_devclass;
|
|
|
|
DRIVER_MODULE(urtw, uhub, urtw_driver, urtw_devclass, NULL, 0);
|
|
MODULE_DEPEND(urtw, wlan, 1, 1, 1);
|
|
MODULE_DEPEND(urtw, usb, 1, 1, 1);
|
|
MODULE_VERSION(urtw, 1);
|
|
USB_PNP_HOST_INFO(urtw_devs);
|