4039 lines
108 KiB
C
4039 lines
108 KiB
C
/*-
|
|
* SPDX-License-Identifier: BSD-4-Clause
|
|
*
|
|
* Copyright (c) 1997, 1998, 1999
|
|
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Bill Paul.
|
|
* 4. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Alteon Networks Tigon PCI gigabit ethernet driver for FreeBSD.
|
|
* Manuals, sample driver and firmware source kits are available
|
|
* from http://www.alteon.com/support/openkits.
|
|
*
|
|
* Written by Bill Paul <wpaul@ctr.columbia.edu>
|
|
* Electrical Engineering Department
|
|
* Columbia University, New York City
|
|
*/
|
|
|
|
/*
|
|
* The Alteon Networks Tigon chip contains an embedded R4000 CPU,
|
|
* gigabit MAC, dual DMA channels and a PCI interface unit. NICs
|
|
* using the Tigon may have anywhere from 512K to 2MB of SRAM. The
|
|
* Tigon supports hardware IP, TCP and UCP checksumming, multicast
|
|
* filtering and jumbo (9014 byte) frames. The hardware is largely
|
|
* controlled by firmware, which must be loaded into the NIC during
|
|
* initialization.
|
|
*
|
|
* The Tigon 2 contains 2 R4000 CPUs and requires a newer firmware
|
|
* revision, which supports new features such as extended commands,
|
|
* extended jumbo receive ring desciptors and a mini receive ring.
|
|
*
|
|
* Alteon Networks is to be commended for releasing such a vast amount
|
|
* of development material for the Tigon NIC without requiring an NDA
|
|
* (although they really should have done it a long time ago). With
|
|
* any luck, the other vendors will finally wise up and follow Alteon's
|
|
* stellar example.
|
|
*
|
|
* The firmware for the Tigon 1 and 2 NICs is compiled directly into
|
|
* this driver by #including it as a C header file. This bloats the
|
|
* driver somewhat, but it's the easiest method considering that the
|
|
* driver code and firmware code need to be kept in sync. The source
|
|
* for the firmware is not provided with the FreeBSD distribution since
|
|
* compiling it requires a GNU toolchain targeted for mips-sgi-irix5.3.
|
|
*
|
|
* The following people deserve special thanks:
|
|
* - Terry Murphy of 3Com, for providing a 3c985 Tigon 1 board
|
|
* for testing
|
|
* - Raymond Lee of Netgear, for providing a pair of Netgear
|
|
* GA620 Tigon 2 boards for testing
|
|
* - Ulf Zimmermann, for bringing the GA260 to my attention and
|
|
* convincing me to write this driver.
|
|
* - Andrew Gallatin for providing FreeBSD/Alpha support.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include "opt_ti.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/queue.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/sf_buf.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_var.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/ethernet.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
#include <net/if_types.h>
|
|
#include <net/if_vlan_var.h>
|
|
|
|
#include <net/bpf.h>
|
|
|
|
#include <netinet/in_systm.h>
|
|
#include <netinet/in.h>
|
|
#include <netinet/ip.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/rman.h>
|
|
|
|
#ifdef TI_SF_BUF_JUMBO
|
|
#include <vm/vm.h>
|
|
#include <vm/vm_page.h>
|
|
#endif
|
|
|
|
#include <dev/pci/pcireg.h>
|
|
#include <dev/pci/pcivar.h>
|
|
|
|
#include <sys/tiio.h>
|
|
#include <dev/ti/if_tireg.h>
|
|
#include <dev/ti/ti_fw.h>
|
|
#include <dev/ti/ti_fw2.h>
|
|
|
|
#include <sys/sysctl.h>
|
|
|
|
#define TI_CSUM_FEATURES (CSUM_IP | CSUM_TCP | CSUM_UDP)
|
|
/*
|
|
* We can only turn on header splitting if we're using extended receive
|
|
* BDs.
|
|
*/
|
|
#if defined(TI_JUMBO_HDRSPLIT) && !defined(TI_SF_BUF_JUMBO)
|
|
#error "options TI_JUMBO_HDRSPLIT requires TI_SF_BUF_JUMBO"
|
|
#endif /* TI_JUMBO_HDRSPLIT && !TI_SF_BUF_JUMBO */
|
|
|
|
typedef enum {
|
|
TI_SWAP_HTON,
|
|
TI_SWAP_NTOH
|
|
} ti_swap_type;
|
|
|
|
/*
|
|
* Various supported device vendors/types and their names.
|
|
*/
|
|
|
|
static const struct ti_type ti_devs[] = {
|
|
{ ALT_VENDORID, ALT_DEVICEID_ACENIC,
|
|
"Alteon AceNIC 1000baseSX Gigabit Ethernet" },
|
|
{ ALT_VENDORID, ALT_DEVICEID_ACENIC_COPPER,
|
|
"Alteon AceNIC 1000baseT Gigabit Ethernet" },
|
|
{ TC_VENDORID, TC_DEVICEID_3C985,
|
|
"3Com 3c985-SX Gigabit Ethernet" },
|
|
{ NG_VENDORID, NG_DEVICEID_GA620,
|
|
"Netgear GA620 1000baseSX Gigabit Ethernet" },
|
|
{ NG_VENDORID, NG_DEVICEID_GA620T,
|
|
"Netgear GA620 1000baseT Gigabit Ethernet" },
|
|
{ SGI_VENDORID, SGI_DEVICEID_TIGON,
|
|
"Silicon Graphics Gigabit Ethernet" },
|
|
{ DEC_VENDORID, DEC_DEVICEID_FARALLON_PN9000SX,
|
|
"Farallon PN9000SX Gigabit Ethernet" },
|
|
{ 0, 0, NULL }
|
|
};
|
|
|
|
static d_open_t ti_open;
|
|
static d_close_t ti_close;
|
|
static d_ioctl_t ti_ioctl2;
|
|
|
|
static struct cdevsw ti_cdevsw = {
|
|
.d_version = D_VERSION,
|
|
.d_flags = 0,
|
|
.d_open = ti_open,
|
|
.d_close = ti_close,
|
|
.d_ioctl = ti_ioctl2,
|
|
.d_name = "ti",
|
|
};
|
|
|
|
static int ti_probe(device_t);
|
|
static int ti_attach(device_t);
|
|
static int ti_detach(device_t);
|
|
static void ti_txeof(struct ti_softc *);
|
|
static void ti_rxeof(struct ti_softc *);
|
|
|
|
static int ti_encap(struct ti_softc *, struct mbuf **);
|
|
|
|
static void ti_intr(void *);
|
|
static void ti_start(struct ifnet *);
|
|
static void ti_start_locked(struct ifnet *);
|
|
static int ti_ioctl(struct ifnet *, u_long, caddr_t);
|
|
static uint64_t ti_get_counter(struct ifnet *, ift_counter);
|
|
static void ti_init(void *);
|
|
static void ti_init_locked(void *);
|
|
static void ti_init2(struct ti_softc *);
|
|
static void ti_stop(struct ti_softc *);
|
|
static void ti_watchdog(void *);
|
|
static int ti_shutdown(device_t);
|
|
static int ti_ifmedia_upd(struct ifnet *);
|
|
static int ti_ifmedia_upd_locked(struct ti_softc *);
|
|
static void ti_ifmedia_sts(struct ifnet *, struct ifmediareq *);
|
|
|
|
static uint32_t ti_eeprom_putbyte(struct ti_softc *, int);
|
|
static uint8_t ti_eeprom_getbyte(struct ti_softc *, int, uint8_t *);
|
|
static int ti_read_eeprom(struct ti_softc *, caddr_t, int, int);
|
|
|
|
static u_int ti_add_mcast(void *, struct sockaddr_dl *, u_int);
|
|
static u_int ti_del_mcast(void *, struct sockaddr_dl *, u_int);
|
|
static void ti_setmulti(struct ti_softc *);
|
|
|
|
static void ti_mem_read(struct ti_softc *, uint32_t, uint32_t, void *);
|
|
static void ti_mem_write(struct ti_softc *, uint32_t, uint32_t, void *);
|
|
static void ti_mem_zero(struct ti_softc *, uint32_t, uint32_t);
|
|
static int ti_copy_mem(struct ti_softc *, uint32_t, uint32_t, caddr_t, int,
|
|
int);
|
|
static int ti_copy_scratch(struct ti_softc *, uint32_t, uint32_t, caddr_t,
|
|
int, int, int);
|
|
static int ti_bcopy_swap(const void *, void *, size_t, ti_swap_type);
|
|
static void ti_loadfw(struct ti_softc *);
|
|
static void ti_cmd(struct ti_softc *, struct ti_cmd_desc *);
|
|
static void ti_cmd_ext(struct ti_softc *, struct ti_cmd_desc *, caddr_t, int);
|
|
static void ti_handle_events(struct ti_softc *);
|
|
static void ti_dma_map_addr(void *, bus_dma_segment_t *, int, int);
|
|
static int ti_dma_alloc(struct ti_softc *);
|
|
static void ti_dma_free(struct ti_softc *);
|
|
static int ti_dma_ring_alloc(struct ti_softc *, bus_size_t, bus_size_t,
|
|
bus_dma_tag_t *, uint8_t **, bus_dmamap_t *, bus_addr_t *, const char *);
|
|
static void ti_dma_ring_free(struct ti_softc *, bus_dma_tag_t *, uint8_t **,
|
|
bus_dmamap_t, bus_addr_t *);
|
|
static int ti_newbuf_std(struct ti_softc *, int);
|
|
static int ti_newbuf_mini(struct ti_softc *, int);
|
|
static int ti_newbuf_jumbo(struct ti_softc *, int, struct mbuf *);
|
|
static int ti_init_rx_ring_std(struct ti_softc *);
|
|
static void ti_free_rx_ring_std(struct ti_softc *);
|
|
static int ti_init_rx_ring_jumbo(struct ti_softc *);
|
|
static void ti_free_rx_ring_jumbo(struct ti_softc *);
|
|
static int ti_init_rx_ring_mini(struct ti_softc *);
|
|
static void ti_free_rx_ring_mini(struct ti_softc *);
|
|
static void ti_free_tx_ring(struct ti_softc *);
|
|
static int ti_init_tx_ring(struct ti_softc *);
|
|
static void ti_discard_std(struct ti_softc *, int);
|
|
#ifndef TI_SF_BUF_JUMBO
|
|
static void ti_discard_jumbo(struct ti_softc *, int);
|
|
#endif
|
|
static void ti_discard_mini(struct ti_softc *, int);
|
|
|
|
static int ti_64bitslot_war(struct ti_softc *);
|
|
static int ti_chipinit(struct ti_softc *);
|
|
static int ti_gibinit(struct ti_softc *);
|
|
|
|
#ifdef TI_JUMBO_HDRSPLIT
|
|
static __inline void ti_hdr_split(struct mbuf *top, int hdr_len, int pkt_len,
|
|
int idx);
|
|
#endif /* TI_JUMBO_HDRSPLIT */
|
|
|
|
static void ti_sysctl_node(struct ti_softc *);
|
|
|
|
static device_method_t ti_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, ti_probe),
|
|
DEVMETHOD(device_attach, ti_attach),
|
|
DEVMETHOD(device_detach, ti_detach),
|
|
DEVMETHOD(device_shutdown, ti_shutdown),
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t ti_driver = {
|
|
"ti",
|
|
ti_methods,
|
|
sizeof(struct ti_softc)
|
|
};
|
|
|
|
static devclass_t ti_devclass;
|
|
|
|
DRIVER_MODULE(ti, pci, ti_driver, ti_devclass, 0, 0);
|
|
MODULE_DEPEND(ti, pci, 1, 1, 1);
|
|
MODULE_DEPEND(ti, ether, 1, 1, 1);
|
|
|
|
/*
|
|
* Send an instruction or address to the EEPROM, check for ACK.
|
|
*/
|
|
static uint32_t
|
|
ti_eeprom_putbyte(struct ti_softc *sc, int byte)
|
|
{
|
|
int i, ack = 0;
|
|
|
|
/*
|
|
* Make sure we're in TX mode.
|
|
*/
|
|
TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN);
|
|
|
|
/*
|
|
* Feed in each bit and stobe the clock.
|
|
*/
|
|
for (i = 0x80; i; i >>= 1) {
|
|
if (byte & i) {
|
|
TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT);
|
|
} else {
|
|
TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT);
|
|
}
|
|
DELAY(1);
|
|
TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK);
|
|
DELAY(1);
|
|
TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK);
|
|
}
|
|
|
|
/*
|
|
* Turn off TX mode.
|
|
*/
|
|
TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN);
|
|
|
|
/*
|
|
* Check for ack.
|
|
*/
|
|
TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK);
|
|
ack = CSR_READ_4(sc, TI_MISC_LOCAL_CTL) & TI_MLC_EE_DIN;
|
|
TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK);
|
|
|
|
return (ack);
|
|
}
|
|
|
|
/*
|
|
* Read a byte of data stored in the EEPROM at address 'addr.'
|
|
* We have to send two address bytes since the EEPROM can hold
|
|
* more than 256 bytes of data.
|
|
*/
|
|
static uint8_t
|
|
ti_eeprom_getbyte(struct ti_softc *sc, int addr, uint8_t *dest)
|
|
{
|
|
int i;
|
|
uint8_t byte = 0;
|
|
|
|
EEPROM_START;
|
|
|
|
/*
|
|
* Send write control code to EEPROM.
|
|
*/
|
|
if (ti_eeprom_putbyte(sc, EEPROM_CTL_WRITE)) {
|
|
device_printf(sc->ti_dev,
|
|
"failed to send write command, status: %x\n",
|
|
CSR_READ_4(sc, TI_MISC_LOCAL_CTL));
|
|
return (1);
|
|
}
|
|
|
|
/*
|
|
* Send first byte of address of byte we want to read.
|
|
*/
|
|
if (ti_eeprom_putbyte(sc, (addr >> 8) & 0xFF)) {
|
|
device_printf(sc->ti_dev, "failed to send address, status: %x\n",
|
|
CSR_READ_4(sc, TI_MISC_LOCAL_CTL));
|
|
return (1);
|
|
}
|
|
/*
|
|
* Send second byte address of byte we want to read.
|
|
*/
|
|
if (ti_eeprom_putbyte(sc, addr & 0xFF)) {
|
|
device_printf(sc->ti_dev, "failed to send address, status: %x\n",
|
|
CSR_READ_4(sc, TI_MISC_LOCAL_CTL));
|
|
return (1);
|
|
}
|
|
|
|
EEPROM_STOP;
|
|
EEPROM_START;
|
|
/*
|
|
* Send read control code to EEPROM.
|
|
*/
|
|
if (ti_eeprom_putbyte(sc, EEPROM_CTL_READ)) {
|
|
device_printf(sc->ti_dev,
|
|
"failed to send read command, status: %x\n",
|
|
CSR_READ_4(sc, TI_MISC_LOCAL_CTL));
|
|
return (1);
|
|
}
|
|
|
|
/*
|
|
* Start reading bits from EEPROM.
|
|
*/
|
|
TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN);
|
|
for (i = 0x80; i; i >>= 1) {
|
|
TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK);
|
|
DELAY(1);
|
|
if (CSR_READ_4(sc, TI_MISC_LOCAL_CTL) & TI_MLC_EE_DIN)
|
|
byte |= i;
|
|
TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK);
|
|
DELAY(1);
|
|
}
|
|
|
|
EEPROM_STOP;
|
|
|
|
/*
|
|
* No ACK generated for read, so just return byte.
|
|
*/
|
|
|
|
*dest = byte;
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Read a sequence of bytes from the EEPROM.
|
|
*/
|
|
static int
|
|
ti_read_eeprom(struct ti_softc *sc, caddr_t dest, int off, int cnt)
|
|
{
|
|
int err = 0, i;
|
|
uint8_t byte = 0;
|
|
|
|
for (i = 0; i < cnt; i++) {
|
|
err = ti_eeprom_getbyte(sc, off + i, &byte);
|
|
if (err)
|
|
break;
|
|
*(dest + i) = byte;
|
|
}
|
|
|
|
return (err ? 1 : 0);
|
|
}
|
|
|
|
/*
|
|
* NIC memory read function.
|
|
* Can be used to copy data from NIC local memory.
|
|
*/
|
|
static void
|
|
ti_mem_read(struct ti_softc *sc, uint32_t addr, uint32_t len, void *buf)
|
|
{
|
|
int segptr, segsize, cnt;
|
|
char *ptr;
|
|
|
|
segptr = addr;
|
|
cnt = len;
|
|
ptr = buf;
|
|
|
|
while (cnt) {
|
|
if (cnt < TI_WINLEN)
|
|
segsize = cnt;
|
|
else
|
|
segsize = TI_WINLEN - (segptr % TI_WINLEN);
|
|
CSR_WRITE_4(sc, TI_WINBASE, rounddown2(segptr, TI_WINLEN));
|
|
bus_space_read_region_4(sc->ti_btag, sc->ti_bhandle,
|
|
TI_WINDOW + (segptr & (TI_WINLEN - 1)), (uint32_t *)ptr,
|
|
segsize / 4);
|
|
ptr += segsize;
|
|
segptr += segsize;
|
|
cnt -= segsize;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* NIC memory write function.
|
|
* Can be used to copy data into NIC local memory.
|
|
*/
|
|
static void
|
|
ti_mem_write(struct ti_softc *sc, uint32_t addr, uint32_t len, void *buf)
|
|
{
|
|
int segptr, segsize, cnt;
|
|
char *ptr;
|
|
|
|
segptr = addr;
|
|
cnt = len;
|
|
ptr = buf;
|
|
|
|
while (cnt) {
|
|
if (cnt < TI_WINLEN)
|
|
segsize = cnt;
|
|
else
|
|
segsize = TI_WINLEN - (segptr % TI_WINLEN);
|
|
CSR_WRITE_4(sc, TI_WINBASE, rounddown2(segptr, TI_WINLEN));
|
|
bus_space_write_region_4(sc->ti_btag, sc->ti_bhandle,
|
|
TI_WINDOW + (segptr & (TI_WINLEN - 1)), (uint32_t *)ptr,
|
|
segsize / 4);
|
|
ptr += segsize;
|
|
segptr += segsize;
|
|
cnt -= segsize;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* NIC memory read function.
|
|
* Can be used to clear a section of NIC local memory.
|
|
*/
|
|
static void
|
|
ti_mem_zero(struct ti_softc *sc, uint32_t addr, uint32_t len)
|
|
{
|
|
int segptr, segsize, cnt;
|
|
|
|
segptr = addr;
|
|
cnt = len;
|
|
|
|
while (cnt) {
|
|
if (cnt < TI_WINLEN)
|
|
segsize = cnt;
|
|
else
|
|
segsize = TI_WINLEN - (segptr % TI_WINLEN);
|
|
CSR_WRITE_4(sc, TI_WINBASE, rounddown2(segptr, TI_WINLEN));
|
|
bus_space_set_region_4(sc->ti_btag, sc->ti_bhandle,
|
|
TI_WINDOW + (segptr & (TI_WINLEN - 1)), 0, segsize / 4);
|
|
segptr += segsize;
|
|
cnt -= segsize;
|
|
}
|
|
}
|
|
|
|
static int
|
|
ti_copy_mem(struct ti_softc *sc, uint32_t tigon_addr, uint32_t len,
|
|
caddr_t buf, int useraddr, int readdata)
|
|
{
|
|
int segptr, segsize, cnt;
|
|
caddr_t ptr;
|
|
uint32_t origwin;
|
|
int resid, segresid;
|
|
int first_pass;
|
|
|
|
TI_LOCK_ASSERT(sc);
|
|
|
|
/*
|
|
* At the moment, we don't handle non-aligned cases, we just bail.
|
|
* If this proves to be a problem, it will be fixed.
|
|
*/
|
|
if (readdata == 0 && (tigon_addr & 0x3) != 0) {
|
|
device_printf(sc->ti_dev, "%s: tigon address %#x isn't "
|
|
"word-aligned\n", __func__, tigon_addr);
|
|
device_printf(sc->ti_dev, "%s: unaligned writes aren't "
|
|
"yet supported\n", __func__);
|
|
return (EINVAL);
|
|
}
|
|
|
|
segptr = tigon_addr & ~0x3;
|
|
segresid = tigon_addr - segptr;
|
|
|
|
/*
|
|
* This is the non-aligned amount left over that we'll need to
|
|
* copy.
|
|
*/
|
|
resid = len & 0x3;
|
|
|
|
/* Add in the left over amount at the front of the buffer */
|
|
resid += segresid;
|
|
|
|
cnt = len & ~0x3;
|
|
/*
|
|
* If resid + segresid is >= 4, add multiples of 4 to the count and
|
|
* decrease the residual by that much.
|
|
*/
|
|
cnt += resid & ~0x3;
|
|
resid -= resid & ~0x3;
|
|
|
|
ptr = buf;
|
|
|
|
first_pass = 1;
|
|
|
|
/*
|
|
* Save the old window base value.
|
|
*/
|
|
origwin = CSR_READ_4(sc, TI_WINBASE);
|
|
|
|
while (cnt) {
|
|
bus_size_t ti_offset;
|
|
|
|
if (cnt < TI_WINLEN)
|
|
segsize = cnt;
|
|
else
|
|
segsize = TI_WINLEN - (segptr % TI_WINLEN);
|
|
CSR_WRITE_4(sc, TI_WINBASE, rounddown2(segptr, TI_WINLEN));
|
|
|
|
ti_offset = TI_WINDOW + (segptr & (TI_WINLEN -1));
|
|
|
|
if (readdata) {
|
|
bus_space_read_region_4(sc->ti_btag, sc->ti_bhandle,
|
|
ti_offset, (uint32_t *)sc->ti_membuf, segsize >> 2);
|
|
if (useraddr) {
|
|
/*
|
|
* Yeah, this is a little on the kludgy
|
|
* side, but at least this code is only
|
|
* used for debugging.
|
|
*/
|
|
ti_bcopy_swap(sc->ti_membuf, sc->ti_membuf2,
|
|
segsize, TI_SWAP_NTOH);
|
|
|
|
TI_UNLOCK(sc);
|
|
if (first_pass) {
|
|
copyout(&sc->ti_membuf2[segresid], ptr,
|
|
segsize - segresid);
|
|
first_pass = 0;
|
|
} else
|
|
copyout(sc->ti_membuf2, ptr, segsize);
|
|
TI_LOCK(sc);
|
|
} else {
|
|
if (first_pass) {
|
|
ti_bcopy_swap(sc->ti_membuf,
|
|
sc->ti_membuf2, segsize,
|
|
TI_SWAP_NTOH);
|
|
TI_UNLOCK(sc);
|
|
bcopy(&sc->ti_membuf2[segresid], ptr,
|
|
segsize - segresid);
|
|
TI_LOCK(sc);
|
|
first_pass = 0;
|
|
} else
|
|
ti_bcopy_swap(sc->ti_membuf, ptr,
|
|
segsize, TI_SWAP_NTOH);
|
|
}
|
|
|
|
} else {
|
|
if (useraddr) {
|
|
TI_UNLOCK(sc);
|
|
copyin(ptr, sc->ti_membuf2, segsize);
|
|
TI_LOCK(sc);
|
|
ti_bcopy_swap(sc->ti_membuf2, sc->ti_membuf,
|
|
segsize, TI_SWAP_HTON);
|
|
} else
|
|
ti_bcopy_swap(ptr, sc->ti_membuf, segsize,
|
|
TI_SWAP_HTON);
|
|
|
|
bus_space_write_region_4(sc->ti_btag, sc->ti_bhandle,
|
|
ti_offset, (uint32_t *)sc->ti_membuf, segsize >> 2);
|
|
}
|
|
segptr += segsize;
|
|
ptr += segsize;
|
|
cnt -= segsize;
|
|
}
|
|
|
|
/*
|
|
* Handle leftover, non-word-aligned bytes.
|
|
*/
|
|
if (resid != 0) {
|
|
uint32_t tmpval, tmpval2;
|
|
bus_size_t ti_offset;
|
|
|
|
/*
|
|
* Set the segment pointer.
|
|
*/
|
|
CSR_WRITE_4(sc, TI_WINBASE, rounddown2(segptr, TI_WINLEN));
|
|
|
|
ti_offset = TI_WINDOW + (segptr & (TI_WINLEN - 1));
|
|
|
|
/*
|
|
* First, grab whatever is in our source/destination.
|
|
* We'll obviously need this for reads, but also for
|
|
* writes, since we'll be doing read/modify/write.
|
|
*/
|
|
bus_space_read_region_4(sc->ti_btag, sc->ti_bhandle,
|
|
ti_offset, &tmpval, 1);
|
|
|
|
/*
|
|
* Next, translate this from little-endian to big-endian
|
|
* (at least on i386 boxes).
|
|
*/
|
|
tmpval2 = ntohl(tmpval);
|
|
|
|
if (readdata) {
|
|
/*
|
|
* If we're reading, just copy the leftover number
|
|
* of bytes from the host byte order buffer to
|
|
* the user's buffer.
|
|
*/
|
|
if (useraddr) {
|
|
TI_UNLOCK(sc);
|
|
copyout(&tmpval2, ptr, resid);
|
|
TI_LOCK(sc);
|
|
} else
|
|
bcopy(&tmpval2, ptr, resid);
|
|
} else {
|
|
/*
|
|
* If we're writing, first copy the bytes to be
|
|
* written into the network byte order buffer,
|
|
* leaving the rest of the buffer with whatever was
|
|
* originally in there. Then, swap the bytes
|
|
* around into host order and write them out.
|
|
*
|
|
* XXX KDM the read side of this has been verified
|
|
* to work, but the write side of it has not been
|
|
* verified. So user beware.
|
|
*/
|
|
if (useraddr) {
|
|
TI_UNLOCK(sc);
|
|
copyin(ptr, &tmpval2, resid);
|
|
TI_LOCK(sc);
|
|
} else
|
|
bcopy(ptr, &tmpval2, resid);
|
|
|
|
tmpval = htonl(tmpval2);
|
|
|
|
bus_space_write_region_4(sc->ti_btag, sc->ti_bhandle,
|
|
ti_offset, &tmpval, 1);
|
|
}
|
|
}
|
|
|
|
CSR_WRITE_4(sc, TI_WINBASE, origwin);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
ti_copy_scratch(struct ti_softc *sc, uint32_t tigon_addr, uint32_t len,
|
|
caddr_t buf, int useraddr, int readdata, int cpu)
|
|
{
|
|
uint32_t segptr;
|
|
int cnt;
|
|
uint32_t tmpval, tmpval2;
|
|
caddr_t ptr;
|
|
|
|
TI_LOCK_ASSERT(sc);
|
|
|
|
/*
|
|
* At the moment, we don't handle non-aligned cases, we just bail.
|
|
* If this proves to be a problem, it will be fixed.
|
|
*/
|
|
if (tigon_addr & 0x3) {
|
|
device_printf(sc->ti_dev, "%s: tigon address %#x "
|
|
"isn't word-aligned\n", __func__, tigon_addr);
|
|
return (EINVAL);
|
|
}
|
|
|
|
if (len & 0x3) {
|
|
device_printf(sc->ti_dev, "%s: transfer length %d "
|
|
"isn't word-aligned\n", __func__, len);
|
|
return (EINVAL);
|
|
}
|
|
|
|
segptr = tigon_addr;
|
|
cnt = len;
|
|
ptr = buf;
|
|
|
|
while (cnt) {
|
|
CSR_WRITE_4(sc, CPU_REG(TI_SRAM_ADDR, cpu), segptr);
|
|
|
|
if (readdata) {
|
|
tmpval2 = CSR_READ_4(sc, CPU_REG(TI_SRAM_DATA, cpu));
|
|
|
|
tmpval = ntohl(tmpval2);
|
|
|
|
/*
|
|
* Note: I've used this debugging interface
|
|
* extensively with Alteon's 12.3.15 firmware,
|
|
* compiled with GCC 2.7.2.1 and binutils 2.9.1.
|
|
*
|
|
* When you compile the firmware without
|
|
* optimization, which is necessary sometimes in
|
|
* order to properly step through it, you sometimes
|
|
* read out a bogus value of 0xc0017c instead of
|
|
* whatever was supposed to be in that scratchpad
|
|
* location. That value is on the stack somewhere,
|
|
* but I've never been able to figure out what was
|
|
* causing the problem.
|
|
*
|
|
* The address seems to pop up in random places,
|
|
* often not in the same place on two subsequent
|
|
* reads.
|
|
*
|
|
* In any case, the underlying data doesn't seem
|
|
* to be affected, just the value read out.
|
|
*
|
|
* KDM, 3/7/2000
|
|
*/
|
|
|
|
if (tmpval2 == 0xc0017c)
|
|
device_printf(sc->ti_dev, "found 0xc0017c at "
|
|
"%#x (tmpval2)\n", segptr);
|
|
|
|
if (tmpval == 0xc0017c)
|
|
device_printf(sc->ti_dev, "found 0xc0017c at "
|
|
"%#x (tmpval)\n", segptr);
|
|
|
|
if (useraddr)
|
|
copyout(&tmpval, ptr, 4);
|
|
else
|
|
bcopy(&tmpval, ptr, 4);
|
|
} else {
|
|
if (useraddr)
|
|
copyin(ptr, &tmpval2, 4);
|
|
else
|
|
bcopy(ptr, &tmpval2, 4);
|
|
|
|
tmpval = htonl(tmpval2);
|
|
|
|
CSR_WRITE_4(sc, CPU_REG(TI_SRAM_DATA, cpu), tmpval);
|
|
}
|
|
|
|
cnt -= 4;
|
|
segptr += 4;
|
|
ptr += 4;
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
ti_bcopy_swap(const void *src, void *dst, size_t len, ti_swap_type swap_type)
|
|
{
|
|
const uint8_t *tmpsrc;
|
|
uint8_t *tmpdst;
|
|
size_t tmplen;
|
|
|
|
if (len & 0x3) {
|
|
printf("ti_bcopy_swap: length %zd isn't 32-bit aligned\n", len);
|
|
return (-1);
|
|
}
|
|
|
|
tmpsrc = src;
|
|
tmpdst = dst;
|
|
tmplen = len;
|
|
|
|
while (tmplen) {
|
|
if (swap_type == TI_SWAP_NTOH)
|
|
*(uint32_t *)tmpdst = ntohl(*(const uint32_t *)tmpsrc);
|
|
else
|
|
*(uint32_t *)tmpdst = htonl(*(const uint32_t *)tmpsrc);
|
|
tmpsrc += 4;
|
|
tmpdst += 4;
|
|
tmplen -= 4;
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Load firmware image into the NIC. Check that the firmware revision
|
|
* is acceptable and see if we want the firmware for the Tigon 1 or
|
|
* Tigon 2.
|
|
*/
|
|
static void
|
|
ti_loadfw(struct ti_softc *sc)
|
|
{
|
|
|
|
TI_LOCK_ASSERT(sc);
|
|
|
|
switch (sc->ti_hwrev) {
|
|
case TI_HWREV_TIGON:
|
|
if (tigonFwReleaseMajor != TI_FIRMWARE_MAJOR ||
|
|
tigonFwReleaseMinor != TI_FIRMWARE_MINOR ||
|
|
tigonFwReleaseFix != TI_FIRMWARE_FIX) {
|
|
device_printf(sc->ti_dev, "firmware revision mismatch; "
|
|
"want %d.%d.%d, got %d.%d.%d\n",
|
|
TI_FIRMWARE_MAJOR, TI_FIRMWARE_MINOR,
|
|
TI_FIRMWARE_FIX, tigonFwReleaseMajor,
|
|
tigonFwReleaseMinor, tigonFwReleaseFix);
|
|
return;
|
|
}
|
|
ti_mem_write(sc, tigonFwTextAddr, tigonFwTextLen, tigonFwText);
|
|
ti_mem_write(sc, tigonFwDataAddr, tigonFwDataLen, tigonFwData);
|
|
ti_mem_write(sc, tigonFwRodataAddr, tigonFwRodataLen,
|
|
tigonFwRodata);
|
|
ti_mem_zero(sc, tigonFwBssAddr, tigonFwBssLen);
|
|
ti_mem_zero(sc, tigonFwSbssAddr, tigonFwSbssLen);
|
|
CSR_WRITE_4(sc, TI_CPU_PROGRAM_COUNTER, tigonFwStartAddr);
|
|
break;
|
|
case TI_HWREV_TIGON_II:
|
|
if (tigon2FwReleaseMajor != TI_FIRMWARE_MAJOR ||
|
|
tigon2FwReleaseMinor != TI_FIRMWARE_MINOR ||
|
|
tigon2FwReleaseFix != TI_FIRMWARE_FIX) {
|
|
device_printf(sc->ti_dev, "firmware revision mismatch; "
|
|
"want %d.%d.%d, got %d.%d.%d\n",
|
|
TI_FIRMWARE_MAJOR, TI_FIRMWARE_MINOR,
|
|
TI_FIRMWARE_FIX, tigon2FwReleaseMajor,
|
|
tigon2FwReleaseMinor, tigon2FwReleaseFix);
|
|
return;
|
|
}
|
|
ti_mem_write(sc, tigon2FwTextAddr, tigon2FwTextLen,
|
|
tigon2FwText);
|
|
ti_mem_write(sc, tigon2FwDataAddr, tigon2FwDataLen,
|
|
tigon2FwData);
|
|
ti_mem_write(sc, tigon2FwRodataAddr, tigon2FwRodataLen,
|
|
tigon2FwRodata);
|
|
ti_mem_zero(sc, tigon2FwBssAddr, tigon2FwBssLen);
|
|
ti_mem_zero(sc, tigon2FwSbssAddr, tigon2FwSbssLen);
|
|
CSR_WRITE_4(sc, TI_CPU_PROGRAM_COUNTER, tigon2FwStartAddr);
|
|
break;
|
|
default:
|
|
device_printf(sc->ti_dev,
|
|
"can't load firmware: unknown hardware rev\n");
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Send the NIC a command via the command ring.
|
|
*/
|
|
static void
|
|
ti_cmd(struct ti_softc *sc, struct ti_cmd_desc *cmd)
|
|
{
|
|
int index;
|
|
|
|
index = sc->ti_cmd_saved_prodidx;
|
|
CSR_WRITE_4(sc, TI_GCR_CMDRING + (index * 4), *(uint32_t *)(cmd));
|
|
TI_INC(index, TI_CMD_RING_CNT);
|
|
CSR_WRITE_4(sc, TI_MB_CMDPROD_IDX, index);
|
|
sc->ti_cmd_saved_prodidx = index;
|
|
}
|
|
|
|
/*
|
|
* Send the NIC an extended command. The 'len' parameter specifies the
|
|
* number of command slots to include after the initial command.
|
|
*/
|
|
static void
|
|
ti_cmd_ext(struct ti_softc *sc, struct ti_cmd_desc *cmd, caddr_t arg, int len)
|
|
{
|
|
int index;
|
|
int i;
|
|
|
|
index = sc->ti_cmd_saved_prodidx;
|
|
CSR_WRITE_4(sc, TI_GCR_CMDRING + (index * 4), *(uint32_t *)(cmd));
|
|
TI_INC(index, TI_CMD_RING_CNT);
|
|
for (i = 0; i < len; i++) {
|
|
CSR_WRITE_4(sc, TI_GCR_CMDRING + (index * 4),
|
|
*(uint32_t *)(&arg[i * 4]));
|
|
TI_INC(index, TI_CMD_RING_CNT);
|
|
}
|
|
CSR_WRITE_4(sc, TI_MB_CMDPROD_IDX, index);
|
|
sc->ti_cmd_saved_prodidx = index;
|
|
}
|
|
|
|
/*
|
|
* Handle events that have triggered interrupts.
|
|
*/
|
|
static void
|
|
ti_handle_events(struct ti_softc *sc)
|
|
{
|
|
struct ti_event_desc *e;
|
|
|
|
if (sc->ti_rdata.ti_event_ring == NULL)
|
|
return;
|
|
|
|
bus_dmamap_sync(sc->ti_cdata.ti_event_ring_tag,
|
|
sc->ti_cdata.ti_event_ring_map, BUS_DMASYNC_POSTREAD);
|
|
while (sc->ti_ev_saved_considx != sc->ti_ev_prodidx.ti_idx) {
|
|
e = &sc->ti_rdata.ti_event_ring[sc->ti_ev_saved_considx];
|
|
switch (TI_EVENT_EVENT(e)) {
|
|
case TI_EV_LINKSTAT_CHANGED:
|
|
sc->ti_linkstat = TI_EVENT_CODE(e);
|
|
if (sc->ti_linkstat == TI_EV_CODE_LINK_UP) {
|
|
if_link_state_change(sc->ti_ifp, LINK_STATE_UP);
|
|
sc->ti_ifp->if_baudrate = IF_Mbps(100);
|
|
if (bootverbose)
|
|
device_printf(sc->ti_dev,
|
|
"10/100 link up\n");
|
|
} else if (sc->ti_linkstat == TI_EV_CODE_GIG_LINK_UP) {
|
|
if_link_state_change(sc->ti_ifp, LINK_STATE_UP);
|
|
sc->ti_ifp->if_baudrate = IF_Gbps(1UL);
|
|
if (bootverbose)
|
|
device_printf(sc->ti_dev,
|
|
"gigabit link up\n");
|
|
} else if (sc->ti_linkstat == TI_EV_CODE_LINK_DOWN) {
|
|
if_link_state_change(sc->ti_ifp,
|
|
LINK_STATE_DOWN);
|
|
sc->ti_ifp->if_baudrate = 0;
|
|
if (bootverbose)
|
|
device_printf(sc->ti_dev,
|
|
"link down\n");
|
|
}
|
|
break;
|
|
case TI_EV_ERROR:
|
|
if (TI_EVENT_CODE(e) == TI_EV_CODE_ERR_INVAL_CMD)
|
|
device_printf(sc->ti_dev, "invalid command\n");
|
|
else if (TI_EVENT_CODE(e) == TI_EV_CODE_ERR_UNIMP_CMD)
|
|
device_printf(sc->ti_dev, "unknown command\n");
|
|
else if (TI_EVENT_CODE(e) == TI_EV_CODE_ERR_BADCFG)
|
|
device_printf(sc->ti_dev, "bad config data\n");
|
|
break;
|
|
case TI_EV_FIRMWARE_UP:
|
|
ti_init2(sc);
|
|
break;
|
|
case TI_EV_STATS_UPDATED:
|
|
case TI_EV_RESET_JUMBO_RING:
|
|
case TI_EV_MCAST_UPDATED:
|
|
/* Who cares. */
|
|
break;
|
|
default:
|
|
device_printf(sc->ti_dev, "unknown event: %d\n",
|
|
TI_EVENT_EVENT(e));
|
|
break;
|
|
}
|
|
/* Advance the consumer index. */
|
|
TI_INC(sc->ti_ev_saved_considx, TI_EVENT_RING_CNT);
|
|
CSR_WRITE_4(sc, TI_GCR_EVENTCONS_IDX, sc->ti_ev_saved_considx);
|
|
}
|
|
bus_dmamap_sync(sc->ti_cdata.ti_event_ring_tag,
|
|
sc->ti_cdata.ti_event_ring_map, BUS_DMASYNC_PREREAD);
|
|
}
|
|
|
|
struct ti_dmamap_arg {
|
|
bus_addr_t ti_busaddr;
|
|
};
|
|
|
|
static void
|
|
ti_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error)
|
|
{
|
|
struct ti_dmamap_arg *ctx;
|
|
|
|
if (error)
|
|
return;
|
|
|
|
KASSERT(nseg == 1, ("%s: %d segments returned!", __func__, nseg));
|
|
|
|
ctx = arg;
|
|
ctx->ti_busaddr = segs->ds_addr;
|
|
}
|
|
|
|
static int
|
|
ti_dma_ring_alloc(struct ti_softc *sc, bus_size_t alignment, bus_size_t maxsize,
|
|
bus_dma_tag_t *tag, uint8_t **ring, bus_dmamap_t *map, bus_addr_t *paddr,
|
|
const char *msg)
|
|
{
|
|
struct ti_dmamap_arg ctx;
|
|
int error;
|
|
|
|
error = bus_dma_tag_create(sc->ti_cdata.ti_parent_tag,
|
|
alignment, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL,
|
|
NULL, maxsize, 1, maxsize, 0, NULL, NULL, tag);
|
|
if (error != 0) {
|
|
device_printf(sc->ti_dev,
|
|
"could not create %s dma tag\n", msg);
|
|
return (error);
|
|
}
|
|
/* Allocate DMA'able memory for ring. */
|
|
error = bus_dmamem_alloc(*tag, (void **)ring,
|
|
BUS_DMA_NOWAIT | BUS_DMA_ZERO | BUS_DMA_COHERENT, map);
|
|
if (error != 0) {
|
|
device_printf(sc->ti_dev,
|
|
"could not allocate DMA'able memory for %s\n", msg);
|
|
return (error);
|
|
}
|
|
/* Load the address of the ring. */
|
|
ctx.ti_busaddr = 0;
|
|
error = bus_dmamap_load(*tag, *map, *ring, maxsize, ti_dma_map_addr,
|
|
&ctx, BUS_DMA_NOWAIT);
|
|
if (error != 0) {
|
|
device_printf(sc->ti_dev,
|
|
"could not load DMA'able memory for %s\n", msg);
|
|
return (error);
|
|
}
|
|
*paddr = ctx.ti_busaddr;
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
ti_dma_ring_free(struct ti_softc *sc, bus_dma_tag_t *tag, uint8_t **ring,
|
|
bus_dmamap_t map, bus_addr_t *paddr)
|
|
{
|
|
|
|
if (*paddr != 0) {
|
|
bus_dmamap_unload(*tag, map);
|
|
*paddr = 0;
|
|
}
|
|
if (*ring != NULL) {
|
|
bus_dmamem_free(*tag, *ring, map);
|
|
*ring = NULL;
|
|
}
|
|
if (*tag) {
|
|
bus_dma_tag_destroy(*tag);
|
|
*tag = NULL;
|
|
}
|
|
}
|
|
|
|
static int
|
|
ti_dma_alloc(struct ti_softc *sc)
|
|
{
|
|
bus_addr_t lowaddr;
|
|
int i, error;
|
|
|
|
lowaddr = BUS_SPACE_MAXADDR;
|
|
if (sc->ti_dac == 0)
|
|
lowaddr = BUS_SPACE_MAXADDR_32BIT;
|
|
|
|
error = bus_dma_tag_create(bus_get_dma_tag(sc->ti_dev), 1, 0, lowaddr,
|
|
BUS_SPACE_MAXADDR, NULL, NULL, BUS_SPACE_MAXSIZE_32BIT, 0,
|
|
BUS_SPACE_MAXSIZE_32BIT, 0, NULL, NULL,
|
|
&sc->ti_cdata.ti_parent_tag);
|
|
if (error != 0) {
|
|
device_printf(sc->ti_dev,
|
|
"could not allocate parent dma tag\n");
|
|
return (ENOMEM);
|
|
}
|
|
|
|
error = ti_dma_ring_alloc(sc, TI_RING_ALIGN, sizeof(struct ti_gib),
|
|
&sc->ti_cdata.ti_gib_tag, (uint8_t **)&sc->ti_rdata.ti_info,
|
|
&sc->ti_cdata.ti_gib_map, &sc->ti_rdata.ti_info_paddr, "GIB");
|
|
if (error)
|
|
return (error);
|
|
|
|
/* Producer/consumer status */
|
|
error = ti_dma_ring_alloc(sc, TI_RING_ALIGN, sizeof(struct ti_status),
|
|
&sc->ti_cdata.ti_status_tag, (uint8_t **)&sc->ti_rdata.ti_status,
|
|
&sc->ti_cdata.ti_status_map, &sc->ti_rdata.ti_status_paddr,
|
|
"event ring");
|
|
if (error)
|
|
return (error);
|
|
|
|
/* Event ring */
|
|
error = ti_dma_ring_alloc(sc, TI_RING_ALIGN, TI_EVENT_RING_SZ,
|
|
&sc->ti_cdata.ti_event_ring_tag,
|
|
(uint8_t **)&sc->ti_rdata.ti_event_ring,
|
|
&sc->ti_cdata.ti_event_ring_map, &sc->ti_rdata.ti_event_ring_paddr,
|
|
"event ring");
|
|
if (error)
|
|
return (error);
|
|
|
|
/* Command ring lives in shared memory so no need to create DMA area. */
|
|
|
|
/* Standard RX ring */
|
|
error = ti_dma_ring_alloc(sc, TI_RING_ALIGN, TI_STD_RX_RING_SZ,
|
|
&sc->ti_cdata.ti_rx_std_ring_tag,
|
|
(uint8_t **)&sc->ti_rdata.ti_rx_std_ring,
|
|
&sc->ti_cdata.ti_rx_std_ring_map,
|
|
&sc->ti_rdata.ti_rx_std_ring_paddr, "RX ring");
|
|
if (error)
|
|
return (error);
|
|
|
|
/* Jumbo RX ring */
|
|
error = ti_dma_ring_alloc(sc, TI_JUMBO_RING_ALIGN, TI_JUMBO_RX_RING_SZ,
|
|
&sc->ti_cdata.ti_rx_jumbo_ring_tag,
|
|
(uint8_t **)&sc->ti_rdata.ti_rx_jumbo_ring,
|
|
&sc->ti_cdata.ti_rx_jumbo_ring_map,
|
|
&sc->ti_rdata.ti_rx_jumbo_ring_paddr, "jumbo RX ring");
|
|
if (error)
|
|
return (error);
|
|
|
|
/* RX return ring */
|
|
error = ti_dma_ring_alloc(sc, TI_RING_ALIGN, TI_RX_RETURN_RING_SZ,
|
|
&sc->ti_cdata.ti_rx_return_ring_tag,
|
|
(uint8_t **)&sc->ti_rdata.ti_rx_return_ring,
|
|
&sc->ti_cdata.ti_rx_return_ring_map,
|
|
&sc->ti_rdata.ti_rx_return_ring_paddr, "RX return ring");
|
|
if (error)
|
|
return (error);
|
|
|
|
/* Create DMA tag for standard RX mbufs. */
|
|
error = bus_dma_tag_create(sc->ti_cdata.ti_parent_tag, 1, 0,
|
|
BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 1,
|
|
MCLBYTES, 0, NULL, NULL, &sc->ti_cdata.ti_rx_std_tag);
|
|
if (error) {
|
|
device_printf(sc->ti_dev, "could not allocate RX dma tag\n");
|
|
return (error);
|
|
}
|
|
|
|
/* Create DMA tag for jumbo RX mbufs. */
|
|
#ifdef TI_SF_BUF_JUMBO
|
|
/*
|
|
* The VM system will take care of providing aligned pages. Alignment
|
|
* is set to 1 here so that busdma resources won't be wasted.
|
|
*/
|
|
error = bus_dma_tag_create(sc->ti_cdata.ti_parent_tag, 1, 0,
|
|
BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, PAGE_SIZE * 4, 4,
|
|
PAGE_SIZE, 0, NULL, NULL, &sc->ti_cdata.ti_rx_jumbo_tag);
|
|
#else
|
|
error = bus_dma_tag_create(sc->ti_cdata.ti_parent_tag, 1, 0,
|
|
BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, MJUM9BYTES, 1,
|
|
MJUM9BYTES, 0, NULL, NULL, &sc->ti_cdata.ti_rx_jumbo_tag);
|
|
#endif
|
|
if (error) {
|
|
device_printf(sc->ti_dev,
|
|
"could not allocate jumbo RX dma tag\n");
|
|
return (error);
|
|
}
|
|
|
|
/* Create DMA tag for TX mbufs. */
|
|
error = bus_dma_tag_create(sc->ti_cdata.ti_parent_tag, 1,
|
|
0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL,
|
|
MCLBYTES * TI_MAXTXSEGS, TI_MAXTXSEGS, MCLBYTES, 0, NULL, NULL,
|
|
&sc->ti_cdata.ti_tx_tag);
|
|
if (error) {
|
|
device_printf(sc->ti_dev, "could not allocate TX dma tag\n");
|
|
return (ENOMEM);
|
|
}
|
|
|
|
/* Create DMA maps for RX buffers. */
|
|
for (i = 0; i < TI_STD_RX_RING_CNT; i++) {
|
|
error = bus_dmamap_create(sc->ti_cdata.ti_rx_std_tag, 0,
|
|
&sc->ti_cdata.ti_rx_std_maps[i]);
|
|
if (error) {
|
|
device_printf(sc->ti_dev,
|
|
"could not create DMA map for RX\n");
|
|
return (error);
|
|
}
|
|
}
|
|
error = bus_dmamap_create(sc->ti_cdata.ti_rx_std_tag, 0,
|
|
&sc->ti_cdata.ti_rx_std_sparemap);
|
|
if (error) {
|
|
device_printf(sc->ti_dev,
|
|
"could not create spare DMA map for RX\n");
|
|
return (error);
|
|
}
|
|
|
|
/* Create DMA maps for jumbo RX buffers. */
|
|
for (i = 0; i < TI_JUMBO_RX_RING_CNT; i++) {
|
|
error = bus_dmamap_create(sc->ti_cdata.ti_rx_jumbo_tag, 0,
|
|
&sc->ti_cdata.ti_rx_jumbo_maps[i]);
|
|
if (error) {
|
|
device_printf(sc->ti_dev,
|
|
"could not create DMA map for jumbo RX\n");
|
|
return (error);
|
|
}
|
|
}
|
|
error = bus_dmamap_create(sc->ti_cdata.ti_rx_jumbo_tag, 0,
|
|
&sc->ti_cdata.ti_rx_jumbo_sparemap);
|
|
if (error) {
|
|
device_printf(sc->ti_dev,
|
|
"could not create spare DMA map for jumbo RX\n");
|
|
return (error);
|
|
}
|
|
|
|
/* Create DMA maps for TX buffers. */
|
|
for (i = 0; i < TI_TX_RING_CNT; i++) {
|
|
error = bus_dmamap_create(sc->ti_cdata.ti_tx_tag, 0,
|
|
&sc->ti_cdata.ti_txdesc[i].tx_dmamap);
|
|
if (error) {
|
|
device_printf(sc->ti_dev,
|
|
"could not create DMA map for TX\n");
|
|
return (ENOMEM);
|
|
}
|
|
}
|
|
|
|
/* Mini ring and TX ring is not available on Tigon 1. */
|
|
if (sc->ti_hwrev == TI_HWREV_TIGON)
|
|
return (0);
|
|
|
|
/* TX ring */
|
|
error = ti_dma_ring_alloc(sc, TI_RING_ALIGN, TI_TX_RING_SZ,
|
|
&sc->ti_cdata.ti_tx_ring_tag, (uint8_t **)&sc->ti_rdata.ti_tx_ring,
|
|
&sc->ti_cdata.ti_tx_ring_map, &sc->ti_rdata.ti_tx_ring_paddr,
|
|
"TX ring");
|
|
if (error)
|
|
return (error);
|
|
|
|
/* Mini RX ring */
|
|
error = ti_dma_ring_alloc(sc, TI_RING_ALIGN, TI_MINI_RX_RING_SZ,
|
|
&sc->ti_cdata.ti_rx_mini_ring_tag,
|
|
(uint8_t **)&sc->ti_rdata.ti_rx_mini_ring,
|
|
&sc->ti_cdata.ti_rx_mini_ring_map,
|
|
&sc->ti_rdata.ti_rx_mini_ring_paddr, "mini RX ring");
|
|
if (error)
|
|
return (error);
|
|
|
|
/* Create DMA tag for mini RX mbufs. */
|
|
error = bus_dma_tag_create(sc->ti_cdata.ti_parent_tag, 1, 0,
|
|
BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, MHLEN, 1,
|
|
MHLEN, 0, NULL, NULL, &sc->ti_cdata.ti_rx_mini_tag);
|
|
if (error) {
|
|
device_printf(sc->ti_dev,
|
|
"could not allocate mini RX dma tag\n");
|
|
return (error);
|
|
}
|
|
|
|
/* Create DMA maps for mini RX buffers. */
|
|
for (i = 0; i < TI_MINI_RX_RING_CNT; i++) {
|
|
error = bus_dmamap_create(sc->ti_cdata.ti_rx_mini_tag, 0,
|
|
&sc->ti_cdata.ti_rx_mini_maps[i]);
|
|
if (error) {
|
|
device_printf(sc->ti_dev,
|
|
"could not create DMA map for mini RX\n");
|
|
return (error);
|
|
}
|
|
}
|
|
error = bus_dmamap_create(sc->ti_cdata.ti_rx_mini_tag, 0,
|
|
&sc->ti_cdata.ti_rx_mini_sparemap);
|
|
if (error) {
|
|
device_printf(sc->ti_dev,
|
|
"could not create spare DMA map for mini RX\n");
|
|
return (error);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
ti_dma_free(struct ti_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
/* Destroy DMA maps for RX buffers. */
|
|
for (i = 0; i < TI_STD_RX_RING_CNT; i++) {
|
|
if (sc->ti_cdata.ti_rx_std_maps[i]) {
|
|
bus_dmamap_destroy(sc->ti_cdata.ti_rx_std_tag,
|
|
sc->ti_cdata.ti_rx_std_maps[i]);
|
|
sc->ti_cdata.ti_rx_std_maps[i] = NULL;
|
|
}
|
|
}
|
|
if (sc->ti_cdata.ti_rx_std_sparemap) {
|
|
bus_dmamap_destroy(sc->ti_cdata.ti_rx_std_tag,
|
|
sc->ti_cdata.ti_rx_std_sparemap);
|
|
sc->ti_cdata.ti_rx_std_sparemap = NULL;
|
|
}
|
|
if (sc->ti_cdata.ti_rx_std_tag) {
|
|
bus_dma_tag_destroy(sc->ti_cdata.ti_rx_std_tag);
|
|
sc->ti_cdata.ti_rx_std_tag = NULL;
|
|
}
|
|
|
|
/* Destroy DMA maps for jumbo RX buffers. */
|
|
for (i = 0; i < TI_JUMBO_RX_RING_CNT; i++) {
|
|
if (sc->ti_cdata.ti_rx_jumbo_maps[i]) {
|
|
bus_dmamap_destroy(sc->ti_cdata.ti_rx_jumbo_tag,
|
|
sc->ti_cdata.ti_rx_jumbo_maps[i]);
|
|
sc->ti_cdata.ti_rx_jumbo_maps[i] = NULL;
|
|
}
|
|
}
|
|
if (sc->ti_cdata.ti_rx_jumbo_sparemap) {
|
|
bus_dmamap_destroy(sc->ti_cdata.ti_rx_jumbo_tag,
|
|
sc->ti_cdata.ti_rx_jumbo_sparemap);
|
|
sc->ti_cdata.ti_rx_jumbo_sparemap = NULL;
|
|
}
|
|
if (sc->ti_cdata.ti_rx_jumbo_tag) {
|
|
bus_dma_tag_destroy(sc->ti_cdata.ti_rx_jumbo_tag);
|
|
sc->ti_cdata.ti_rx_jumbo_tag = NULL;
|
|
}
|
|
|
|
/* Destroy DMA maps for mini RX buffers. */
|
|
for (i = 0; i < TI_MINI_RX_RING_CNT; i++) {
|
|
if (sc->ti_cdata.ti_rx_mini_maps[i]) {
|
|
bus_dmamap_destroy(sc->ti_cdata.ti_rx_mini_tag,
|
|
sc->ti_cdata.ti_rx_mini_maps[i]);
|
|
sc->ti_cdata.ti_rx_mini_maps[i] = NULL;
|
|
}
|
|
}
|
|
if (sc->ti_cdata.ti_rx_mini_sparemap) {
|
|
bus_dmamap_destroy(sc->ti_cdata.ti_rx_mini_tag,
|
|
sc->ti_cdata.ti_rx_mini_sparemap);
|
|
sc->ti_cdata.ti_rx_mini_sparemap = NULL;
|
|
}
|
|
if (sc->ti_cdata.ti_rx_mini_tag) {
|
|
bus_dma_tag_destroy(sc->ti_cdata.ti_rx_mini_tag);
|
|
sc->ti_cdata.ti_rx_mini_tag = NULL;
|
|
}
|
|
|
|
/* Destroy DMA maps for TX buffers. */
|
|
for (i = 0; i < TI_TX_RING_CNT; i++) {
|
|
if (sc->ti_cdata.ti_txdesc[i].tx_dmamap) {
|
|
bus_dmamap_destroy(sc->ti_cdata.ti_tx_tag,
|
|
sc->ti_cdata.ti_txdesc[i].tx_dmamap);
|
|
sc->ti_cdata.ti_txdesc[i].tx_dmamap = NULL;
|
|
}
|
|
}
|
|
if (sc->ti_cdata.ti_tx_tag) {
|
|
bus_dma_tag_destroy(sc->ti_cdata.ti_tx_tag);
|
|
sc->ti_cdata.ti_tx_tag = NULL;
|
|
}
|
|
|
|
/* Destroy standard RX ring. */
|
|
ti_dma_ring_free(sc, &sc->ti_cdata.ti_rx_std_ring_tag,
|
|
(void *)&sc->ti_rdata.ti_rx_std_ring,
|
|
sc->ti_cdata.ti_rx_std_ring_map,
|
|
&sc->ti_rdata.ti_rx_std_ring_paddr);
|
|
/* Destroy jumbo RX ring. */
|
|
ti_dma_ring_free(sc, &sc->ti_cdata.ti_rx_jumbo_ring_tag,
|
|
(void *)&sc->ti_rdata.ti_rx_jumbo_ring,
|
|
sc->ti_cdata.ti_rx_jumbo_ring_map,
|
|
&sc->ti_rdata.ti_rx_jumbo_ring_paddr);
|
|
/* Destroy mini RX ring. */
|
|
ti_dma_ring_free(sc, &sc->ti_cdata.ti_rx_mini_ring_tag,
|
|
(void *)&sc->ti_rdata.ti_rx_mini_ring,
|
|
sc->ti_cdata.ti_rx_mini_ring_map,
|
|
&sc->ti_rdata.ti_rx_mini_ring_paddr);
|
|
/* Destroy RX return ring. */
|
|
ti_dma_ring_free(sc, &sc->ti_cdata.ti_rx_return_ring_tag,
|
|
(void *)&sc->ti_rdata.ti_rx_return_ring,
|
|
sc->ti_cdata.ti_rx_return_ring_map,
|
|
&sc->ti_rdata.ti_rx_return_ring_paddr);
|
|
/* Destroy TX ring. */
|
|
ti_dma_ring_free(sc, &sc->ti_cdata.ti_tx_ring_tag,
|
|
(void *)&sc->ti_rdata.ti_tx_ring, sc->ti_cdata.ti_tx_ring_map,
|
|
&sc->ti_rdata.ti_tx_ring_paddr);
|
|
/* Destroy status block. */
|
|
ti_dma_ring_free(sc, &sc->ti_cdata.ti_status_tag,
|
|
(void *)&sc->ti_rdata.ti_status, sc->ti_cdata.ti_status_map,
|
|
&sc->ti_rdata.ti_status_paddr);
|
|
/* Destroy event ring. */
|
|
ti_dma_ring_free(sc, &sc->ti_cdata.ti_event_ring_tag,
|
|
(void *)&sc->ti_rdata.ti_event_ring,
|
|
sc->ti_cdata.ti_event_ring_map, &sc->ti_rdata.ti_event_ring_paddr);
|
|
/* Destroy GIB */
|
|
ti_dma_ring_free(sc, &sc->ti_cdata.ti_gib_tag,
|
|
(void *)&sc->ti_rdata.ti_info, sc->ti_cdata.ti_gib_map,
|
|
&sc->ti_rdata.ti_info_paddr);
|
|
|
|
/* Destroy the parent tag. */
|
|
if (sc->ti_cdata.ti_parent_tag) {
|
|
bus_dma_tag_destroy(sc->ti_cdata.ti_parent_tag);
|
|
sc->ti_cdata.ti_parent_tag = NULL;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Intialize a standard receive ring descriptor.
|
|
*/
|
|
static int
|
|
ti_newbuf_std(struct ti_softc *sc, int i)
|
|
{
|
|
bus_dmamap_t map;
|
|
bus_dma_segment_t segs[1];
|
|
struct mbuf *m;
|
|
struct ti_rx_desc *r;
|
|
int error, nsegs;
|
|
|
|
m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR);
|
|
if (m == NULL)
|
|
return (ENOBUFS);
|
|
m->m_len = m->m_pkthdr.len = MCLBYTES;
|
|
m_adj(m, ETHER_ALIGN);
|
|
|
|
error = bus_dmamap_load_mbuf_sg(sc->ti_cdata.ti_rx_std_tag,
|
|
sc->ti_cdata.ti_rx_std_sparemap, m, segs, &nsegs, 0);
|
|
if (error != 0) {
|
|
m_freem(m);
|
|
return (error);
|
|
}
|
|
KASSERT(nsegs == 1, ("%s: %d segments returned!", __func__, nsegs));
|
|
|
|
if (sc->ti_cdata.ti_rx_std_chain[i] != NULL) {
|
|
bus_dmamap_sync(sc->ti_cdata.ti_rx_std_tag,
|
|
sc->ti_cdata.ti_rx_std_maps[i], BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(sc->ti_cdata.ti_rx_std_tag,
|
|
sc->ti_cdata.ti_rx_std_maps[i]);
|
|
}
|
|
|
|
map = sc->ti_cdata.ti_rx_std_maps[i];
|
|
sc->ti_cdata.ti_rx_std_maps[i] = sc->ti_cdata.ti_rx_std_sparemap;
|
|
sc->ti_cdata.ti_rx_std_sparemap = map;
|
|
sc->ti_cdata.ti_rx_std_chain[i] = m;
|
|
|
|
r = &sc->ti_rdata.ti_rx_std_ring[i];
|
|
ti_hostaddr64(&r->ti_addr, segs[0].ds_addr);
|
|
r->ti_len = segs[0].ds_len;
|
|
r->ti_type = TI_BDTYPE_RECV_BD;
|
|
r->ti_flags = 0;
|
|
r->ti_vlan_tag = 0;
|
|
r->ti_tcp_udp_cksum = 0;
|
|
if (sc->ti_ifp->if_capenable & IFCAP_RXCSUM)
|
|
r->ti_flags |= TI_BDFLAG_TCP_UDP_CKSUM | TI_BDFLAG_IP_CKSUM;
|
|
r->ti_idx = i;
|
|
|
|
bus_dmamap_sync(sc->ti_cdata.ti_rx_std_tag,
|
|
sc->ti_cdata.ti_rx_std_maps[i], BUS_DMASYNC_PREREAD);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Intialize a mini receive ring descriptor. This only applies to
|
|
* the Tigon 2.
|
|
*/
|
|
static int
|
|
ti_newbuf_mini(struct ti_softc *sc, int i)
|
|
{
|
|
bus_dmamap_t map;
|
|
bus_dma_segment_t segs[1];
|
|
struct mbuf *m;
|
|
struct ti_rx_desc *r;
|
|
int error, nsegs;
|
|
|
|
MGETHDR(m, M_NOWAIT, MT_DATA);
|
|
if (m == NULL)
|
|
return (ENOBUFS);
|
|
m->m_len = m->m_pkthdr.len = MHLEN;
|
|
m_adj(m, ETHER_ALIGN);
|
|
|
|
error = bus_dmamap_load_mbuf_sg(sc->ti_cdata.ti_rx_mini_tag,
|
|
sc->ti_cdata.ti_rx_mini_sparemap, m, segs, &nsegs, 0);
|
|
if (error != 0) {
|
|
m_freem(m);
|
|
return (error);
|
|
}
|
|
KASSERT(nsegs == 1, ("%s: %d segments returned!", __func__, nsegs));
|
|
|
|
if (sc->ti_cdata.ti_rx_mini_chain[i] != NULL) {
|
|
bus_dmamap_sync(sc->ti_cdata.ti_rx_mini_tag,
|
|
sc->ti_cdata.ti_rx_mini_maps[i], BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(sc->ti_cdata.ti_rx_mini_tag,
|
|
sc->ti_cdata.ti_rx_mini_maps[i]);
|
|
}
|
|
|
|
map = sc->ti_cdata.ti_rx_mini_maps[i];
|
|
sc->ti_cdata.ti_rx_mini_maps[i] = sc->ti_cdata.ti_rx_mini_sparemap;
|
|
sc->ti_cdata.ti_rx_mini_sparemap = map;
|
|
sc->ti_cdata.ti_rx_mini_chain[i] = m;
|
|
|
|
r = &sc->ti_rdata.ti_rx_mini_ring[i];
|
|
ti_hostaddr64(&r->ti_addr, segs[0].ds_addr);
|
|
r->ti_len = segs[0].ds_len;
|
|
r->ti_type = TI_BDTYPE_RECV_BD;
|
|
r->ti_flags = TI_BDFLAG_MINI_RING;
|
|
r->ti_vlan_tag = 0;
|
|
r->ti_tcp_udp_cksum = 0;
|
|
if (sc->ti_ifp->if_capenable & IFCAP_RXCSUM)
|
|
r->ti_flags |= TI_BDFLAG_TCP_UDP_CKSUM | TI_BDFLAG_IP_CKSUM;
|
|
r->ti_idx = i;
|
|
|
|
bus_dmamap_sync(sc->ti_cdata.ti_rx_mini_tag,
|
|
sc->ti_cdata.ti_rx_mini_maps[i], BUS_DMASYNC_PREREAD);
|
|
return (0);
|
|
}
|
|
|
|
#ifndef TI_SF_BUF_JUMBO
|
|
|
|
/*
|
|
* Initialize a jumbo receive ring descriptor. This allocates
|
|
* a jumbo buffer from the pool managed internally by the driver.
|
|
*/
|
|
static int
|
|
ti_newbuf_jumbo(struct ti_softc *sc, int i, struct mbuf *dummy)
|
|
{
|
|
bus_dmamap_t map;
|
|
bus_dma_segment_t segs[1];
|
|
struct mbuf *m;
|
|
struct ti_rx_desc *r;
|
|
int error, nsegs;
|
|
|
|
(void)dummy;
|
|
|
|
m = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR, MJUM9BYTES);
|
|
if (m == NULL)
|
|
return (ENOBUFS);
|
|
m->m_len = m->m_pkthdr.len = MJUM9BYTES;
|
|
m_adj(m, ETHER_ALIGN);
|
|
|
|
error = bus_dmamap_load_mbuf_sg(sc->ti_cdata.ti_rx_jumbo_tag,
|
|
sc->ti_cdata.ti_rx_jumbo_sparemap, m, segs, &nsegs, 0);
|
|
if (error != 0) {
|
|
m_freem(m);
|
|
return (error);
|
|
}
|
|
KASSERT(nsegs == 1, ("%s: %d segments returned!", __func__, nsegs));
|
|
|
|
if (sc->ti_cdata.ti_rx_jumbo_chain[i] != NULL) {
|
|
bus_dmamap_sync(sc->ti_cdata.ti_rx_jumbo_tag,
|
|
sc->ti_cdata.ti_rx_jumbo_maps[i], BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(sc->ti_cdata.ti_rx_jumbo_tag,
|
|
sc->ti_cdata.ti_rx_jumbo_maps[i]);
|
|
}
|
|
|
|
map = sc->ti_cdata.ti_rx_jumbo_maps[i];
|
|
sc->ti_cdata.ti_rx_jumbo_maps[i] = sc->ti_cdata.ti_rx_jumbo_sparemap;
|
|
sc->ti_cdata.ti_rx_jumbo_sparemap = map;
|
|
sc->ti_cdata.ti_rx_jumbo_chain[i] = m;
|
|
|
|
r = &sc->ti_rdata.ti_rx_jumbo_ring[i];
|
|
ti_hostaddr64(&r->ti_addr, segs[0].ds_addr);
|
|
r->ti_len = segs[0].ds_len;
|
|
r->ti_type = TI_BDTYPE_RECV_JUMBO_BD;
|
|
r->ti_flags = TI_BDFLAG_JUMBO_RING;
|
|
r->ti_vlan_tag = 0;
|
|
r->ti_tcp_udp_cksum = 0;
|
|
if (sc->ti_ifp->if_capenable & IFCAP_RXCSUM)
|
|
r->ti_flags |= TI_BDFLAG_TCP_UDP_CKSUM | TI_BDFLAG_IP_CKSUM;
|
|
r->ti_idx = i;
|
|
|
|
bus_dmamap_sync(sc->ti_cdata.ti_rx_jumbo_tag,
|
|
sc->ti_cdata.ti_rx_jumbo_maps[i], BUS_DMASYNC_PREREAD);
|
|
return (0);
|
|
}
|
|
|
|
#else
|
|
|
|
#if (PAGE_SIZE == 4096)
|
|
#define NPAYLOAD 2
|
|
#else
|
|
#define NPAYLOAD 1
|
|
#endif
|
|
|
|
#define TCP_HDR_LEN (52 + sizeof(struct ether_header))
|
|
#define UDP_HDR_LEN (28 + sizeof(struct ether_header))
|
|
#define NFS_HDR_LEN (UDP_HDR_LEN)
|
|
static int HDR_LEN = TCP_HDR_LEN;
|
|
|
|
/*
|
|
* Initialize a jumbo receive ring descriptor. This allocates
|
|
* a jumbo buffer from the pool managed internally by the driver.
|
|
*/
|
|
static int
|
|
ti_newbuf_jumbo(struct ti_softc *sc, int idx, struct mbuf *m_old)
|
|
{
|
|
bus_dmamap_t map;
|
|
struct mbuf *cur, *m_new = NULL;
|
|
struct mbuf *m[3] = {NULL, NULL, NULL};
|
|
struct ti_rx_desc_ext *r;
|
|
vm_page_t frame;
|
|
/* 1 extra buf to make nobufs easy*/
|
|
struct sf_buf *sf[3] = {NULL, NULL, NULL};
|
|
int i;
|
|
bus_dma_segment_t segs[4];
|
|
int nsegs;
|
|
|
|
if (m_old != NULL) {
|
|
m_new = m_old;
|
|
cur = m_old->m_next;
|
|
for (i = 0; i <= NPAYLOAD; i++){
|
|
m[i] = cur;
|
|
cur = cur->m_next;
|
|
}
|
|
} else {
|
|
/* Allocate the mbufs. */
|
|
MGETHDR(m_new, M_NOWAIT, MT_DATA);
|
|
if (m_new == NULL) {
|
|
device_printf(sc->ti_dev, "mbuf allocation failed "
|
|
"-- packet dropped!\n");
|
|
goto nobufs;
|
|
}
|
|
MGET(m[NPAYLOAD], M_NOWAIT, MT_DATA);
|
|
if (m[NPAYLOAD] == NULL) {
|
|
device_printf(sc->ti_dev, "cluster mbuf allocation "
|
|
"failed -- packet dropped!\n");
|
|
goto nobufs;
|
|
}
|
|
if (!(MCLGET(m[NPAYLOAD], M_NOWAIT))) {
|
|
device_printf(sc->ti_dev, "mbuf allocation failed "
|
|
"-- packet dropped!\n");
|
|
goto nobufs;
|
|
}
|
|
m[NPAYLOAD]->m_len = MCLBYTES;
|
|
|
|
for (i = 0; i < NPAYLOAD; i++){
|
|
MGET(m[i], M_NOWAIT, MT_DATA);
|
|
if (m[i] == NULL) {
|
|
device_printf(sc->ti_dev, "mbuf allocation "
|
|
"failed -- packet dropped!\n");
|
|
goto nobufs;
|
|
}
|
|
frame = vm_page_alloc(NULL, 0,
|
|
VM_ALLOC_INTERRUPT | VM_ALLOC_NOOBJ |
|
|
VM_ALLOC_WIRED);
|
|
if (frame == NULL) {
|
|
device_printf(sc->ti_dev, "buffer allocation "
|
|
"failed -- packet dropped!\n");
|
|
printf(" index %d page %d\n", idx, i);
|
|
goto nobufs;
|
|
}
|
|
sf[i] = sf_buf_alloc(frame, SFB_NOWAIT);
|
|
if (sf[i] == NULL) {
|
|
vm_page_unwire_noq(frame);
|
|
vm_page_free(frame);
|
|
device_printf(sc->ti_dev, "buffer allocation "
|
|
"failed -- packet dropped!\n");
|
|
printf(" index %d page %d\n", idx, i);
|
|
goto nobufs;
|
|
}
|
|
}
|
|
for (i = 0; i < NPAYLOAD; i++){
|
|
/* Attach the buffer to the mbuf. */
|
|
m[i]->m_data = (void *)sf_buf_kva(sf[i]);
|
|
m[i]->m_len = PAGE_SIZE;
|
|
MEXTADD(m[i], sf_buf_kva(sf[i]), PAGE_SIZE,
|
|
sf_mext_free, (void*)sf_buf_kva(sf[i]), sf[i],
|
|
0, EXT_DISPOSABLE);
|
|
m[i]->m_next = m[i+1];
|
|
}
|
|
/* link the buffers to the header */
|
|
m_new->m_next = m[0];
|
|
m_new->m_data += ETHER_ALIGN;
|
|
if (sc->ti_hdrsplit)
|
|
m_new->m_len = MHLEN - ETHER_ALIGN;
|
|
else
|
|
m_new->m_len = HDR_LEN;
|
|
m_new->m_pkthdr.len = NPAYLOAD * PAGE_SIZE + m_new->m_len;
|
|
}
|
|
|
|
/* Set up the descriptor. */
|
|
r = &sc->ti_rdata.ti_rx_jumbo_ring[idx];
|
|
sc->ti_cdata.ti_rx_jumbo_chain[idx] = m_new;
|
|
map = sc->ti_cdata.ti_rx_jumbo_maps[i];
|
|
if (bus_dmamap_load_mbuf_sg(sc->ti_cdata.ti_rx_jumbo_tag, map, m_new,
|
|
segs, &nsegs, 0))
|
|
return (ENOBUFS);
|
|
if ((nsegs < 1) || (nsegs > 4))
|
|
return (ENOBUFS);
|
|
ti_hostaddr64(&r->ti_addr0, segs[0].ds_addr);
|
|
r->ti_len0 = m_new->m_len;
|
|
|
|
ti_hostaddr64(&r->ti_addr1, segs[1].ds_addr);
|
|
r->ti_len1 = PAGE_SIZE;
|
|
|
|
ti_hostaddr64(&r->ti_addr2, segs[2].ds_addr);
|
|
r->ti_len2 = m[1]->m_ext.ext_size; /* could be PAGE_SIZE or MCLBYTES */
|
|
|
|
if (PAGE_SIZE == 4096) {
|
|
ti_hostaddr64(&r->ti_addr3, segs[3].ds_addr);
|
|
r->ti_len3 = MCLBYTES;
|
|
} else {
|
|
r->ti_len3 = 0;
|
|
}
|
|
r->ti_type = TI_BDTYPE_RECV_JUMBO_BD;
|
|
|
|
r->ti_flags = TI_BDFLAG_JUMBO_RING|TI_RCB_FLAG_USE_EXT_RX_BD;
|
|
|
|
if (sc->ti_ifp->if_capenable & IFCAP_RXCSUM)
|
|
r->ti_flags |= TI_BDFLAG_TCP_UDP_CKSUM|TI_BDFLAG_IP_CKSUM;
|
|
|
|
r->ti_idx = idx;
|
|
|
|
bus_dmamap_sync(sc->ti_cdata.ti_rx_jumbo_tag, map, BUS_DMASYNC_PREREAD);
|
|
return (0);
|
|
|
|
nobufs:
|
|
|
|
/*
|
|
* Warning! :
|
|
* This can only be called before the mbufs are strung together.
|
|
* If the mbufs are strung together, m_freem() will free the chain,
|
|
* so that the later mbufs will be freed multiple times.
|
|
*/
|
|
if (m_new)
|
|
m_freem(m_new);
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
if (m[i])
|
|
m_freem(m[i]);
|
|
if (sf[i])
|
|
sf_mext_free((void *)sf_buf_kva(sf[i]), sf[i]);
|
|
}
|
|
return (ENOBUFS);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* The standard receive ring has 512 entries in it. At 2K per mbuf cluster,
|
|
* that's 1MB or memory, which is a lot. For now, we fill only the first
|
|
* 256 ring entries and hope that our CPU is fast enough to keep up with
|
|
* the NIC.
|
|
*/
|
|
static int
|
|
ti_init_rx_ring_std(struct ti_softc *sc)
|
|
{
|
|
int i;
|
|
struct ti_cmd_desc cmd;
|
|
|
|
for (i = 0; i < TI_STD_RX_RING_CNT; i++) {
|
|
if (ti_newbuf_std(sc, i) != 0)
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
sc->ti_std = TI_STD_RX_RING_CNT - 1;
|
|
TI_UPDATE_STDPROD(sc, TI_STD_RX_RING_CNT - 1);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
ti_free_rx_ring_std(struct ti_softc *sc)
|
|
{
|
|
bus_dmamap_t map;
|
|
int i;
|
|
|
|
for (i = 0; i < TI_STD_RX_RING_CNT; i++) {
|
|
if (sc->ti_cdata.ti_rx_std_chain[i] != NULL) {
|
|
map = sc->ti_cdata.ti_rx_std_maps[i];
|
|
bus_dmamap_sync(sc->ti_cdata.ti_rx_std_tag, map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(sc->ti_cdata.ti_rx_std_tag, map);
|
|
m_freem(sc->ti_cdata.ti_rx_std_chain[i]);
|
|
sc->ti_cdata.ti_rx_std_chain[i] = NULL;
|
|
}
|
|
}
|
|
bzero(sc->ti_rdata.ti_rx_std_ring, TI_STD_RX_RING_SZ);
|
|
bus_dmamap_sync(sc->ti_cdata.ti_rx_std_ring_tag,
|
|
sc->ti_cdata.ti_rx_std_ring_map, BUS_DMASYNC_PREWRITE);
|
|
}
|
|
|
|
static int
|
|
ti_init_rx_ring_jumbo(struct ti_softc *sc)
|
|
{
|
|
struct ti_cmd_desc cmd;
|
|
int i;
|
|
|
|
for (i = 0; i < TI_JUMBO_RX_RING_CNT; i++) {
|
|
if (ti_newbuf_jumbo(sc, i, NULL) != 0)
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
sc->ti_jumbo = TI_JUMBO_RX_RING_CNT - 1;
|
|
TI_UPDATE_JUMBOPROD(sc, TI_JUMBO_RX_RING_CNT - 1);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
ti_free_rx_ring_jumbo(struct ti_softc *sc)
|
|
{
|
|
bus_dmamap_t map;
|
|
int i;
|
|
|
|
for (i = 0; i < TI_JUMBO_RX_RING_CNT; i++) {
|
|
if (sc->ti_cdata.ti_rx_jumbo_chain[i] != NULL) {
|
|
map = sc->ti_cdata.ti_rx_jumbo_maps[i];
|
|
bus_dmamap_sync(sc->ti_cdata.ti_rx_jumbo_tag, map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(sc->ti_cdata.ti_rx_jumbo_tag, map);
|
|
m_freem(sc->ti_cdata.ti_rx_jumbo_chain[i]);
|
|
sc->ti_cdata.ti_rx_jumbo_chain[i] = NULL;
|
|
}
|
|
}
|
|
bzero(sc->ti_rdata.ti_rx_jumbo_ring, TI_JUMBO_RX_RING_SZ);
|
|
bus_dmamap_sync(sc->ti_cdata.ti_rx_jumbo_ring_tag,
|
|
sc->ti_cdata.ti_rx_jumbo_ring_map, BUS_DMASYNC_PREWRITE);
|
|
}
|
|
|
|
static int
|
|
ti_init_rx_ring_mini(struct ti_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < TI_MINI_RX_RING_CNT; i++) {
|
|
if (ti_newbuf_mini(sc, i) != 0)
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
sc->ti_mini = TI_MINI_RX_RING_CNT - 1;
|
|
TI_UPDATE_MINIPROD(sc, TI_MINI_RX_RING_CNT - 1);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
ti_free_rx_ring_mini(struct ti_softc *sc)
|
|
{
|
|
bus_dmamap_t map;
|
|
int i;
|
|
|
|
if (sc->ti_rdata.ti_rx_mini_ring == NULL)
|
|
return;
|
|
|
|
for (i = 0; i < TI_MINI_RX_RING_CNT; i++) {
|
|
if (sc->ti_cdata.ti_rx_mini_chain[i] != NULL) {
|
|
map = sc->ti_cdata.ti_rx_mini_maps[i];
|
|
bus_dmamap_sync(sc->ti_cdata.ti_rx_mini_tag, map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(sc->ti_cdata.ti_rx_mini_tag, map);
|
|
m_freem(sc->ti_cdata.ti_rx_mini_chain[i]);
|
|
sc->ti_cdata.ti_rx_mini_chain[i] = NULL;
|
|
}
|
|
}
|
|
bzero(sc->ti_rdata.ti_rx_mini_ring, TI_MINI_RX_RING_SZ);
|
|
bus_dmamap_sync(sc->ti_cdata.ti_rx_mini_ring_tag,
|
|
sc->ti_cdata.ti_rx_mini_ring_map, BUS_DMASYNC_PREWRITE);
|
|
}
|
|
|
|
static void
|
|
ti_free_tx_ring(struct ti_softc *sc)
|
|
{
|
|
struct ti_txdesc *txd;
|
|
int i;
|
|
|
|
if (sc->ti_rdata.ti_tx_ring == NULL)
|
|
return;
|
|
|
|
for (i = 0; i < TI_TX_RING_CNT; i++) {
|
|
txd = &sc->ti_cdata.ti_txdesc[i];
|
|
if (txd->tx_m != NULL) {
|
|
bus_dmamap_sync(sc->ti_cdata.ti_tx_tag, txd->tx_dmamap,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(sc->ti_cdata.ti_tx_tag,
|
|
txd->tx_dmamap);
|
|
m_freem(txd->tx_m);
|
|
txd->tx_m = NULL;
|
|
}
|
|
}
|
|
bzero(sc->ti_rdata.ti_tx_ring, TI_TX_RING_SZ);
|
|
bus_dmamap_sync(sc->ti_cdata.ti_tx_ring_tag,
|
|
sc->ti_cdata.ti_tx_ring_map, BUS_DMASYNC_PREWRITE);
|
|
}
|
|
|
|
static int
|
|
ti_init_tx_ring(struct ti_softc *sc)
|
|
{
|
|
struct ti_txdesc *txd;
|
|
int i;
|
|
|
|
STAILQ_INIT(&sc->ti_cdata.ti_txfreeq);
|
|
STAILQ_INIT(&sc->ti_cdata.ti_txbusyq);
|
|
for (i = 0; i < TI_TX_RING_CNT; i++) {
|
|
txd = &sc->ti_cdata.ti_txdesc[i];
|
|
STAILQ_INSERT_TAIL(&sc->ti_cdata.ti_txfreeq, txd, tx_q);
|
|
}
|
|
sc->ti_txcnt = 0;
|
|
sc->ti_tx_saved_considx = 0;
|
|
sc->ti_tx_saved_prodidx = 0;
|
|
CSR_WRITE_4(sc, TI_MB_SENDPROD_IDX, 0);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* The Tigon 2 firmware has a new way to add/delete multicast addresses,
|
|
* but we have to support the old way too so that Tigon 1 cards will
|
|
* work.
|
|
*/
|
|
static u_int
|
|
ti_add_mcast(void *arg, struct sockaddr_dl *sdl, u_int count)
|
|
{
|
|
struct ti_softc *sc = arg;
|
|
struct ti_cmd_desc cmd;
|
|
uint16_t *m;
|
|
uint32_t ext[2] = {0, 0};
|
|
|
|
m = (uint16_t *)LLADDR(sdl);
|
|
|
|
switch (sc->ti_hwrev) {
|
|
case TI_HWREV_TIGON:
|
|
CSR_WRITE_4(sc, TI_GCR_MAR0, htons(m[0]));
|
|
CSR_WRITE_4(sc, TI_GCR_MAR1, (htons(m[1]) << 16) | htons(m[2]));
|
|
TI_DO_CMD(TI_CMD_ADD_MCAST_ADDR, 0, 0);
|
|
break;
|
|
case TI_HWREV_TIGON_II:
|
|
ext[0] = htons(m[0]);
|
|
ext[1] = (htons(m[1]) << 16) | htons(m[2]);
|
|
TI_DO_CMD_EXT(TI_CMD_EXT_ADD_MCAST, 0, 0, (caddr_t)&ext, 2);
|
|
break;
|
|
default:
|
|
device_printf(sc->ti_dev, "unknown hwrev\n");
|
|
return (0);
|
|
}
|
|
return (1);
|
|
}
|
|
|
|
static u_int
|
|
ti_del_mcast(void *arg, struct sockaddr_dl *sdl, u_int count)
|
|
{
|
|
struct ti_softc *sc = arg;
|
|
struct ti_cmd_desc cmd;
|
|
uint16_t *m;
|
|
uint32_t ext[2] = {0, 0};
|
|
|
|
m = (uint16_t *)LLADDR(sdl);
|
|
|
|
switch (sc->ti_hwrev) {
|
|
case TI_HWREV_TIGON:
|
|
CSR_WRITE_4(sc, TI_GCR_MAR0, htons(m[0]));
|
|
CSR_WRITE_4(sc, TI_GCR_MAR1, (htons(m[1]) << 16) | htons(m[2]));
|
|
TI_DO_CMD(TI_CMD_DEL_MCAST_ADDR, 0, 0);
|
|
break;
|
|
case TI_HWREV_TIGON_II:
|
|
ext[0] = htons(m[0]);
|
|
ext[1] = (htons(m[1]) << 16) | htons(m[2]);
|
|
TI_DO_CMD_EXT(TI_CMD_EXT_DEL_MCAST, 0, 0, (caddr_t)&ext, 2);
|
|
break;
|
|
default:
|
|
device_printf(sc->ti_dev, "unknown hwrev\n");
|
|
return (0);
|
|
}
|
|
|
|
return (1);
|
|
}
|
|
|
|
/*
|
|
* Configure the Tigon's multicast address filter.
|
|
*
|
|
* The actual multicast table management is a bit of a pain, thanks to
|
|
* slight brain damage on the part of both Alteon and us. With our
|
|
* multicast code, we are only alerted when the multicast address table
|
|
* changes and at that point we only have the current list of addresses:
|
|
* we only know the current state, not the previous state, so we don't
|
|
* actually know what addresses were removed or added. The firmware has
|
|
* state, but we can't get our grubby mits on it, and there is no 'delete
|
|
* all multicast addresses' command. Hence, we have to maintain our own
|
|
* state so we know what addresses have been programmed into the NIC at
|
|
* any given time.
|
|
*/
|
|
static void
|
|
ti_setmulti(struct ti_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
struct ti_cmd_desc cmd;
|
|
uint32_t intrs;
|
|
|
|
TI_LOCK_ASSERT(sc);
|
|
|
|
ifp = sc->ti_ifp;
|
|
|
|
if (ifp->if_flags & IFF_ALLMULTI) {
|
|
TI_DO_CMD(TI_CMD_SET_ALLMULTI, TI_CMD_CODE_ALLMULTI_ENB, 0);
|
|
return;
|
|
} else {
|
|
TI_DO_CMD(TI_CMD_SET_ALLMULTI, TI_CMD_CODE_ALLMULTI_DIS, 0);
|
|
}
|
|
|
|
/* Disable interrupts. */
|
|
intrs = CSR_READ_4(sc, TI_MB_HOSTINTR);
|
|
CSR_WRITE_4(sc, TI_MB_HOSTINTR, 1);
|
|
|
|
/* First, zot all the existing filters. */
|
|
if_foreach_llmaddr(ifp, ti_del_mcast, sc);
|
|
|
|
/* Now program new ones. */
|
|
if_foreach_llmaddr(ifp, ti_add_mcast, sc);
|
|
|
|
/* Re-enable interrupts. */
|
|
CSR_WRITE_4(sc, TI_MB_HOSTINTR, intrs);
|
|
}
|
|
|
|
/*
|
|
* Check to see if the BIOS has configured us for a 64 bit slot when
|
|
* we aren't actually in one. If we detect this condition, we can work
|
|
* around it on the Tigon 2 by setting a bit in the PCI state register,
|
|
* but for the Tigon 1 we must give up and abort the interface attach.
|
|
*/
|
|
static int
|
|
ti_64bitslot_war(struct ti_softc *sc)
|
|
{
|
|
|
|
if (!(CSR_READ_4(sc, TI_PCI_STATE) & TI_PCISTATE_32BIT_BUS)) {
|
|
CSR_WRITE_4(sc, 0x600, 0);
|
|
CSR_WRITE_4(sc, 0x604, 0);
|
|
CSR_WRITE_4(sc, 0x600, 0x5555AAAA);
|
|
if (CSR_READ_4(sc, 0x604) == 0x5555AAAA) {
|
|
if (sc->ti_hwrev == TI_HWREV_TIGON)
|
|
return (EINVAL);
|
|
else {
|
|
TI_SETBIT(sc, TI_PCI_STATE,
|
|
TI_PCISTATE_32BIT_BUS);
|
|
return (0);
|
|
}
|
|
}
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Do endian, PCI and DMA initialization. Also check the on-board ROM
|
|
* self-test results.
|
|
*/
|
|
static int
|
|
ti_chipinit(struct ti_softc *sc)
|
|
{
|
|
uint32_t cacheline;
|
|
uint32_t pci_writemax = 0;
|
|
uint32_t hdrsplit;
|
|
|
|
/* Initialize link to down state. */
|
|
sc->ti_linkstat = TI_EV_CODE_LINK_DOWN;
|
|
|
|
/* Set endianness before we access any non-PCI registers. */
|
|
#if 0 && BYTE_ORDER == BIG_ENDIAN
|
|
CSR_WRITE_4(sc, TI_MISC_HOST_CTL,
|
|
TI_MHC_BIGENDIAN_INIT | (TI_MHC_BIGENDIAN_INIT << 24));
|
|
#else
|
|
CSR_WRITE_4(sc, TI_MISC_HOST_CTL,
|
|
TI_MHC_LITTLEENDIAN_INIT | (TI_MHC_LITTLEENDIAN_INIT << 24));
|
|
#endif
|
|
|
|
/* Check the ROM failed bit to see if self-tests passed. */
|
|
if (CSR_READ_4(sc, TI_CPU_STATE) & TI_CPUSTATE_ROMFAIL) {
|
|
device_printf(sc->ti_dev, "board self-diagnostics failed!\n");
|
|
return (ENODEV);
|
|
}
|
|
|
|
/* Halt the CPU. */
|
|
TI_SETBIT(sc, TI_CPU_STATE, TI_CPUSTATE_HALT);
|
|
|
|
/* Figure out the hardware revision. */
|
|
switch (CSR_READ_4(sc, TI_MISC_HOST_CTL) & TI_MHC_CHIP_REV_MASK) {
|
|
case TI_REV_TIGON_I:
|
|
sc->ti_hwrev = TI_HWREV_TIGON;
|
|
break;
|
|
case TI_REV_TIGON_II:
|
|
sc->ti_hwrev = TI_HWREV_TIGON_II;
|
|
break;
|
|
default:
|
|
device_printf(sc->ti_dev, "unsupported chip revision\n");
|
|
return (ENODEV);
|
|
}
|
|
|
|
/* Do special setup for Tigon 2. */
|
|
if (sc->ti_hwrev == TI_HWREV_TIGON_II) {
|
|
TI_SETBIT(sc, TI_CPU_CTL_B, TI_CPUSTATE_HALT);
|
|
TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_SRAM_BANK_512K);
|
|
TI_SETBIT(sc, TI_MISC_CONF, TI_MCR_SRAM_SYNCHRONOUS);
|
|
}
|
|
|
|
/*
|
|
* We don't have firmware source for the Tigon 1, so Tigon 1 boards
|
|
* can't do header splitting.
|
|
*/
|
|
#ifdef TI_JUMBO_HDRSPLIT
|
|
if (sc->ti_hwrev != TI_HWREV_TIGON)
|
|
sc->ti_hdrsplit = 1;
|
|
else
|
|
device_printf(sc->ti_dev,
|
|
"can't do header splitting on a Tigon I board\n");
|
|
#endif /* TI_JUMBO_HDRSPLIT */
|
|
|
|
/* Set up the PCI state register. */
|
|
CSR_WRITE_4(sc, TI_PCI_STATE, TI_PCI_READ_CMD|TI_PCI_WRITE_CMD);
|
|
if (sc->ti_hwrev == TI_HWREV_TIGON_II) {
|
|
TI_SETBIT(sc, TI_PCI_STATE, TI_PCISTATE_USE_MEM_RD_MULT);
|
|
}
|
|
|
|
/* Clear the read/write max DMA parameters. */
|
|
TI_CLRBIT(sc, TI_PCI_STATE, (TI_PCISTATE_WRITE_MAXDMA|
|
|
TI_PCISTATE_READ_MAXDMA));
|
|
|
|
/* Get cache line size. */
|
|
cacheline = CSR_READ_4(sc, TI_PCI_BIST) & 0xFF;
|
|
|
|
/*
|
|
* If the system has set enabled the PCI memory write
|
|
* and invalidate command in the command register, set
|
|
* the write max parameter accordingly. This is necessary
|
|
* to use MWI with the Tigon 2.
|
|
*/
|
|
if (CSR_READ_4(sc, TI_PCI_CMDSTAT) & PCIM_CMD_MWIEN) {
|
|
switch (cacheline) {
|
|
case 1:
|
|
case 4:
|
|
case 8:
|
|
case 16:
|
|
case 32:
|
|
case 64:
|
|
break;
|
|
default:
|
|
/* Disable PCI memory write and invalidate. */
|
|
if (bootverbose)
|
|
device_printf(sc->ti_dev, "cache line size %d"
|
|
" not supported; disabling PCI MWI\n",
|
|
cacheline);
|
|
CSR_WRITE_4(sc, TI_PCI_CMDSTAT, CSR_READ_4(sc,
|
|
TI_PCI_CMDSTAT) & ~PCIM_CMD_MWIEN);
|
|
break;
|
|
}
|
|
}
|
|
|
|
TI_SETBIT(sc, TI_PCI_STATE, pci_writemax);
|
|
|
|
/* This sets the min dma param all the way up (0xff). */
|
|
TI_SETBIT(sc, TI_PCI_STATE, TI_PCISTATE_MINDMA);
|
|
|
|
if (sc->ti_hdrsplit)
|
|
hdrsplit = TI_OPMODE_JUMBO_HDRSPLIT;
|
|
else
|
|
hdrsplit = 0;
|
|
|
|
/* Configure DMA variables. */
|
|
#if BYTE_ORDER == BIG_ENDIAN
|
|
CSR_WRITE_4(sc, TI_GCR_OPMODE, TI_OPMODE_BYTESWAP_BD |
|
|
TI_OPMODE_BYTESWAP_DATA | TI_OPMODE_WORDSWAP_BD |
|
|
TI_OPMODE_WARN_ENB | TI_OPMODE_FATAL_ENB |
|
|
TI_OPMODE_DONT_FRAG_JUMBO | hdrsplit);
|
|
#else /* BYTE_ORDER */
|
|
CSR_WRITE_4(sc, TI_GCR_OPMODE, TI_OPMODE_BYTESWAP_DATA|
|
|
TI_OPMODE_WORDSWAP_BD|TI_OPMODE_DONT_FRAG_JUMBO|
|
|
TI_OPMODE_WARN_ENB|TI_OPMODE_FATAL_ENB | hdrsplit);
|
|
#endif /* BYTE_ORDER */
|
|
|
|
/*
|
|
* Only allow 1 DMA channel to be active at a time.
|
|
* I don't think this is a good idea, but without it
|
|
* the firmware racks up lots of nicDmaReadRingFull
|
|
* errors. This is not compatible with hardware checksums.
|
|
*/
|
|
if ((sc->ti_ifp->if_capenable & (IFCAP_TXCSUM | IFCAP_RXCSUM)) == 0)
|
|
TI_SETBIT(sc, TI_GCR_OPMODE, TI_OPMODE_1_DMA_ACTIVE);
|
|
|
|
/* Recommended settings from Tigon manual. */
|
|
CSR_WRITE_4(sc, TI_GCR_DMA_WRITECFG, TI_DMA_STATE_THRESH_8W);
|
|
CSR_WRITE_4(sc, TI_GCR_DMA_READCFG, TI_DMA_STATE_THRESH_8W);
|
|
|
|
if (ti_64bitslot_war(sc)) {
|
|
device_printf(sc->ti_dev, "bios thinks we're in a 64 bit slot, "
|
|
"but we aren't");
|
|
return (EINVAL);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Initialize the general information block and firmware, and
|
|
* start the CPU(s) running.
|
|
*/
|
|
static int
|
|
ti_gibinit(struct ti_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
struct ti_rcb *rcb;
|
|
int i;
|
|
|
|
TI_LOCK_ASSERT(sc);
|
|
|
|
ifp = sc->ti_ifp;
|
|
|
|
/* Disable interrupts for now. */
|
|
CSR_WRITE_4(sc, TI_MB_HOSTINTR, 1);
|
|
|
|
/* Tell the chip where to find the general information block. */
|
|
CSR_WRITE_4(sc, TI_GCR_GENINFO_HI,
|
|
(uint64_t)sc->ti_rdata.ti_info_paddr >> 32);
|
|
CSR_WRITE_4(sc, TI_GCR_GENINFO_LO,
|
|
sc->ti_rdata.ti_info_paddr & 0xFFFFFFFF);
|
|
|
|
/* Load the firmware into SRAM. */
|
|
ti_loadfw(sc);
|
|
|
|
/* Set up the contents of the general info and ring control blocks. */
|
|
|
|
/* Set up the event ring and producer pointer. */
|
|
bzero(sc->ti_rdata.ti_event_ring, TI_EVENT_RING_SZ);
|
|
rcb = &sc->ti_rdata.ti_info->ti_ev_rcb;
|
|
ti_hostaddr64(&rcb->ti_hostaddr, sc->ti_rdata.ti_event_ring_paddr);
|
|
rcb->ti_flags = 0;
|
|
ti_hostaddr64(&sc->ti_rdata.ti_info->ti_ev_prodidx_ptr,
|
|
sc->ti_rdata.ti_status_paddr +
|
|
offsetof(struct ti_status, ti_ev_prodidx_r));
|
|
sc->ti_ev_prodidx.ti_idx = 0;
|
|
CSR_WRITE_4(sc, TI_GCR_EVENTCONS_IDX, 0);
|
|
sc->ti_ev_saved_considx = 0;
|
|
|
|
/* Set up the command ring and producer mailbox. */
|
|
rcb = &sc->ti_rdata.ti_info->ti_cmd_rcb;
|
|
ti_hostaddr64(&rcb->ti_hostaddr, TI_GCR_NIC_ADDR(TI_GCR_CMDRING));
|
|
rcb->ti_flags = 0;
|
|
rcb->ti_max_len = 0;
|
|
for (i = 0; i < TI_CMD_RING_CNT; i++) {
|
|
CSR_WRITE_4(sc, TI_GCR_CMDRING + (i * 4), 0);
|
|
}
|
|
CSR_WRITE_4(sc, TI_GCR_CMDCONS_IDX, 0);
|
|
CSR_WRITE_4(sc, TI_MB_CMDPROD_IDX, 0);
|
|
sc->ti_cmd_saved_prodidx = 0;
|
|
|
|
/*
|
|
* Assign the address of the stats refresh buffer.
|
|
* We re-use the current stats buffer for this to
|
|
* conserve memory.
|
|
*/
|
|
bzero(&sc->ti_rdata.ti_info->ti_stats, sizeof(struct ti_stats));
|
|
ti_hostaddr64(&sc->ti_rdata.ti_info->ti_refresh_stats_ptr,
|
|
sc->ti_rdata.ti_info_paddr + offsetof(struct ti_gib, ti_stats));
|
|
|
|
/* Set up the standard receive ring. */
|
|
rcb = &sc->ti_rdata.ti_info->ti_std_rx_rcb;
|
|
ti_hostaddr64(&rcb->ti_hostaddr, sc->ti_rdata.ti_rx_std_ring_paddr);
|
|
rcb->ti_max_len = TI_FRAMELEN;
|
|
rcb->ti_flags = 0;
|
|
if (sc->ti_ifp->if_capenable & IFCAP_RXCSUM)
|
|
rcb->ti_flags |= TI_RCB_FLAG_TCP_UDP_CKSUM |
|
|
TI_RCB_FLAG_IP_CKSUM | TI_RCB_FLAG_NO_PHDR_CKSUM;
|
|
if (sc->ti_ifp->if_capenable & IFCAP_VLAN_HWTAGGING)
|
|
rcb->ti_flags |= TI_RCB_FLAG_VLAN_ASSIST;
|
|
|
|
/* Set up the jumbo receive ring. */
|
|
rcb = &sc->ti_rdata.ti_info->ti_jumbo_rx_rcb;
|
|
ti_hostaddr64(&rcb->ti_hostaddr, sc->ti_rdata.ti_rx_jumbo_ring_paddr);
|
|
|
|
#ifndef TI_SF_BUF_JUMBO
|
|
rcb->ti_max_len = MJUM9BYTES - ETHER_ALIGN;
|
|
rcb->ti_flags = 0;
|
|
#else
|
|
rcb->ti_max_len = PAGE_SIZE;
|
|
rcb->ti_flags = TI_RCB_FLAG_USE_EXT_RX_BD;
|
|
#endif
|
|
if (sc->ti_ifp->if_capenable & IFCAP_RXCSUM)
|
|
rcb->ti_flags |= TI_RCB_FLAG_TCP_UDP_CKSUM |
|
|
TI_RCB_FLAG_IP_CKSUM | TI_RCB_FLAG_NO_PHDR_CKSUM;
|
|
if (sc->ti_ifp->if_capenable & IFCAP_VLAN_HWTAGGING)
|
|
rcb->ti_flags |= TI_RCB_FLAG_VLAN_ASSIST;
|
|
|
|
/*
|
|
* Set up the mini ring. Only activated on the
|
|
* Tigon 2 but the slot in the config block is
|
|
* still there on the Tigon 1.
|
|
*/
|
|
rcb = &sc->ti_rdata.ti_info->ti_mini_rx_rcb;
|
|
ti_hostaddr64(&rcb->ti_hostaddr, sc->ti_rdata.ti_rx_mini_ring_paddr);
|
|
rcb->ti_max_len = MHLEN - ETHER_ALIGN;
|
|
if (sc->ti_hwrev == TI_HWREV_TIGON)
|
|
rcb->ti_flags = TI_RCB_FLAG_RING_DISABLED;
|
|
else
|
|
rcb->ti_flags = 0;
|
|
if (sc->ti_ifp->if_capenable & IFCAP_RXCSUM)
|
|
rcb->ti_flags |= TI_RCB_FLAG_TCP_UDP_CKSUM |
|
|
TI_RCB_FLAG_IP_CKSUM | TI_RCB_FLAG_NO_PHDR_CKSUM;
|
|
if (sc->ti_ifp->if_capenable & IFCAP_VLAN_HWTAGGING)
|
|
rcb->ti_flags |= TI_RCB_FLAG_VLAN_ASSIST;
|
|
|
|
/*
|
|
* Set up the receive return ring.
|
|
*/
|
|
rcb = &sc->ti_rdata.ti_info->ti_return_rcb;
|
|
ti_hostaddr64(&rcb->ti_hostaddr, sc->ti_rdata.ti_rx_return_ring_paddr);
|
|
rcb->ti_flags = 0;
|
|
rcb->ti_max_len = TI_RETURN_RING_CNT;
|
|
ti_hostaddr64(&sc->ti_rdata.ti_info->ti_return_prodidx_ptr,
|
|
sc->ti_rdata.ti_status_paddr +
|
|
offsetof(struct ti_status, ti_return_prodidx_r));
|
|
|
|
/*
|
|
* Set up the tx ring. Note: for the Tigon 2, we have the option
|
|
* of putting the transmit ring in the host's address space and
|
|
* letting the chip DMA it instead of leaving the ring in the NIC's
|
|
* memory and accessing it through the shared memory region. We
|
|
* do this for the Tigon 2, but it doesn't work on the Tigon 1,
|
|
* so we have to revert to the shared memory scheme if we detect
|
|
* a Tigon 1 chip.
|
|
*/
|
|
CSR_WRITE_4(sc, TI_WINBASE, TI_TX_RING_BASE);
|
|
if (sc->ti_rdata.ti_tx_ring != NULL)
|
|
bzero(sc->ti_rdata.ti_tx_ring, TI_TX_RING_SZ);
|
|
rcb = &sc->ti_rdata.ti_info->ti_tx_rcb;
|
|
if (sc->ti_hwrev == TI_HWREV_TIGON)
|
|
rcb->ti_flags = 0;
|
|
else
|
|
rcb->ti_flags = TI_RCB_FLAG_HOST_RING;
|
|
if (sc->ti_ifp->if_capenable & IFCAP_VLAN_HWTAGGING)
|
|
rcb->ti_flags |= TI_RCB_FLAG_VLAN_ASSIST;
|
|
if (sc->ti_ifp->if_capenable & IFCAP_TXCSUM)
|
|
rcb->ti_flags |= TI_RCB_FLAG_TCP_UDP_CKSUM |
|
|
TI_RCB_FLAG_IP_CKSUM | TI_RCB_FLAG_NO_PHDR_CKSUM;
|
|
rcb->ti_max_len = TI_TX_RING_CNT;
|
|
if (sc->ti_hwrev == TI_HWREV_TIGON)
|
|
ti_hostaddr64(&rcb->ti_hostaddr, TI_TX_RING_BASE);
|
|
else
|
|
ti_hostaddr64(&rcb->ti_hostaddr,
|
|
sc->ti_rdata.ti_tx_ring_paddr);
|
|
ti_hostaddr64(&sc->ti_rdata.ti_info->ti_tx_considx_ptr,
|
|
sc->ti_rdata.ti_status_paddr +
|
|
offsetof(struct ti_status, ti_tx_considx_r));
|
|
|
|
bus_dmamap_sync(sc->ti_cdata.ti_gib_tag, sc->ti_cdata.ti_gib_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
bus_dmamap_sync(sc->ti_cdata.ti_status_tag, sc->ti_cdata.ti_status_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
bus_dmamap_sync(sc->ti_cdata.ti_event_ring_tag,
|
|
sc->ti_cdata.ti_event_ring_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
if (sc->ti_rdata.ti_tx_ring != NULL)
|
|
bus_dmamap_sync(sc->ti_cdata.ti_tx_ring_tag,
|
|
sc->ti_cdata.ti_tx_ring_map, BUS_DMASYNC_PREWRITE);
|
|
|
|
/* Set up tunables */
|
|
#if 0
|
|
if (ifp->if_mtu > ETHERMTU + ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN)
|
|
CSR_WRITE_4(sc, TI_GCR_RX_COAL_TICKS,
|
|
(sc->ti_rx_coal_ticks / 10));
|
|
else
|
|
#endif
|
|
CSR_WRITE_4(sc, TI_GCR_RX_COAL_TICKS, sc->ti_rx_coal_ticks);
|
|
CSR_WRITE_4(sc, TI_GCR_TX_COAL_TICKS, sc->ti_tx_coal_ticks);
|
|
CSR_WRITE_4(sc, TI_GCR_STAT_TICKS, sc->ti_stat_ticks);
|
|
CSR_WRITE_4(sc, TI_GCR_RX_MAX_COAL_BD, sc->ti_rx_max_coal_bds);
|
|
CSR_WRITE_4(sc, TI_GCR_TX_MAX_COAL_BD, sc->ti_tx_max_coal_bds);
|
|
CSR_WRITE_4(sc, TI_GCR_TX_BUFFER_RATIO, sc->ti_tx_buf_ratio);
|
|
|
|
/* Turn interrupts on. */
|
|
CSR_WRITE_4(sc, TI_GCR_MASK_INTRS, 0);
|
|
CSR_WRITE_4(sc, TI_MB_HOSTINTR, 0);
|
|
|
|
/* Start CPU. */
|
|
TI_CLRBIT(sc, TI_CPU_STATE, (TI_CPUSTATE_HALT|TI_CPUSTATE_STEP));
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Probe for a Tigon chip. Check the PCI vendor and device IDs
|
|
* against our list and return its name if we find a match.
|
|
*/
|
|
static int
|
|
ti_probe(device_t dev)
|
|
{
|
|
const struct ti_type *t;
|
|
|
|
t = ti_devs;
|
|
|
|
while (t->ti_name != NULL) {
|
|
if ((pci_get_vendor(dev) == t->ti_vid) &&
|
|
(pci_get_device(dev) == t->ti_did)) {
|
|
device_set_desc(dev, t->ti_name);
|
|
return (BUS_PROBE_DEFAULT);
|
|
}
|
|
t++;
|
|
}
|
|
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
ti_attach(device_t dev)
|
|
{
|
|
struct ifnet *ifp;
|
|
struct ti_softc *sc;
|
|
int error = 0, rid;
|
|
u_char eaddr[6];
|
|
|
|
sc = device_get_softc(dev);
|
|
sc->ti_dev = dev;
|
|
|
|
mtx_init(&sc->ti_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
|
|
MTX_DEF);
|
|
callout_init_mtx(&sc->ti_watchdog, &sc->ti_mtx, 0);
|
|
ifmedia_init(&sc->ifmedia, IFM_IMASK, ti_ifmedia_upd, ti_ifmedia_sts);
|
|
ifp = sc->ti_ifp = if_alloc(IFT_ETHER);
|
|
if (ifp == NULL) {
|
|
device_printf(dev, "can not if_alloc()\n");
|
|
error = ENOSPC;
|
|
goto fail;
|
|
}
|
|
sc->ti_ifp->if_hwassist = TI_CSUM_FEATURES;
|
|
sc->ti_ifp->if_capabilities = IFCAP_TXCSUM | IFCAP_RXCSUM;
|
|
sc->ti_ifp->if_capenable = sc->ti_ifp->if_capabilities;
|
|
|
|
/*
|
|
* Map control/status registers.
|
|
*/
|
|
pci_enable_busmaster(dev);
|
|
|
|
rid = PCIR_BAR(0);
|
|
sc->ti_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
|
|
RF_ACTIVE);
|
|
|
|
if (sc->ti_res == NULL) {
|
|
device_printf(dev, "couldn't map memory\n");
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
sc->ti_btag = rman_get_bustag(sc->ti_res);
|
|
sc->ti_bhandle = rman_get_bushandle(sc->ti_res);
|
|
|
|
/* Allocate interrupt */
|
|
rid = 0;
|
|
|
|
sc->ti_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
|
|
RF_SHAREABLE | RF_ACTIVE);
|
|
|
|
if (sc->ti_irq == NULL) {
|
|
device_printf(dev, "couldn't map interrupt\n");
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
if (ti_chipinit(sc)) {
|
|
device_printf(dev, "chip initialization failed\n");
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
/* Zero out the NIC's on-board SRAM. */
|
|
ti_mem_zero(sc, 0x2000, 0x100000 - 0x2000);
|
|
|
|
/* Init again -- zeroing memory may have clobbered some registers. */
|
|
if (ti_chipinit(sc)) {
|
|
device_printf(dev, "chip initialization failed\n");
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
/*
|
|
* Get station address from the EEPROM. Note: the manual states
|
|
* that the MAC address is at offset 0x8c, however the data is
|
|
* stored as two longwords (since that's how it's loaded into
|
|
* the NIC). This means the MAC address is actually preceded
|
|
* by two zero bytes. We need to skip over those.
|
|
*/
|
|
if (ti_read_eeprom(sc, eaddr, TI_EE_MAC_OFFSET + 2, ETHER_ADDR_LEN)) {
|
|
device_printf(dev, "failed to read station address\n");
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
/* Allocate working area for memory dump. */
|
|
sc->ti_membuf = malloc(sizeof(uint8_t) * TI_WINLEN, M_DEVBUF, M_NOWAIT);
|
|
sc->ti_membuf2 = malloc(sizeof(uint8_t) * TI_WINLEN, M_DEVBUF,
|
|
M_NOWAIT);
|
|
if (sc->ti_membuf == NULL || sc->ti_membuf2 == NULL) {
|
|
device_printf(dev, "cannot allocate memory buffer\n");
|
|
error = ENOMEM;
|
|
goto fail;
|
|
}
|
|
if ((error = ti_dma_alloc(sc)) != 0)
|
|
goto fail;
|
|
|
|
/*
|
|
* We really need a better way to tell a 1000baseTX card
|
|
* from a 1000baseSX one, since in theory there could be
|
|
* OEMed 1000baseTX cards from lame vendors who aren't
|
|
* clever enough to change the PCI ID. For the moment
|
|
* though, the AceNIC is the only copper card available.
|
|
*/
|
|
if (pci_get_vendor(dev) == ALT_VENDORID &&
|
|
pci_get_device(dev) == ALT_DEVICEID_ACENIC_COPPER)
|
|
sc->ti_copper = 1;
|
|
/* Ok, it's not the only copper card available. */
|
|
if (pci_get_vendor(dev) == NG_VENDORID &&
|
|
pci_get_device(dev) == NG_DEVICEID_GA620T)
|
|
sc->ti_copper = 1;
|
|
|
|
/* Set default tunable values. */
|
|
ti_sysctl_node(sc);
|
|
|
|
/* Set up ifnet structure */
|
|
ifp->if_softc = sc;
|
|
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_ioctl = ti_ioctl;
|
|
ifp->if_start = ti_start;
|
|
ifp->if_init = ti_init;
|
|
ifp->if_get_counter = ti_get_counter;
|
|
ifp->if_baudrate = IF_Gbps(1UL);
|
|
ifp->if_snd.ifq_drv_maxlen = TI_TX_RING_CNT - 1;
|
|
IFQ_SET_MAXLEN(&ifp->if_snd, ifp->if_snd.ifq_drv_maxlen);
|
|
IFQ_SET_READY(&ifp->if_snd);
|
|
|
|
/* Set up ifmedia support. */
|
|
if (sc->ti_copper) {
|
|
/*
|
|
* Copper cards allow manual 10/100 mode selection,
|
|
* but not manual 1000baseTX mode selection. Why?
|
|
* Because currently there's no way to specify the
|
|
* master/slave setting through the firmware interface,
|
|
* so Alteon decided to just bag it and handle it
|
|
* via autonegotiation.
|
|
*/
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T, 0, NULL);
|
|
ifmedia_add(&sc->ifmedia,
|
|
IFM_ETHER|IFM_10_T|IFM_FDX, 0, NULL);
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_100_TX, 0, NULL);
|
|
ifmedia_add(&sc->ifmedia,
|
|
IFM_ETHER|IFM_100_TX|IFM_FDX, 0, NULL);
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_1000_T, 0, NULL);
|
|
ifmedia_add(&sc->ifmedia,
|
|
IFM_ETHER|IFM_1000_T|IFM_FDX, 0, NULL);
|
|
} else {
|
|
/* Fiber cards don't support 10/100 modes. */
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_1000_SX, 0, NULL);
|
|
ifmedia_add(&sc->ifmedia,
|
|
IFM_ETHER|IFM_1000_SX|IFM_FDX, 0, NULL);
|
|
}
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_AUTO, 0, NULL);
|
|
ifmedia_set(&sc->ifmedia, IFM_ETHER|IFM_AUTO);
|
|
|
|
/*
|
|
* We're assuming here that card initialization is a sequential
|
|
* thing. If it isn't, multiple cards probing at the same time
|
|
* could stomp on the list of softcs here.
|
|
*/
|
|
|
|
/* Register the device */
|
|
sc->dev = make_dev(&ti_cdevsw, device_get_unit(dev), UID_ROOT,
|
|
GID_OPERATOR, 0600, "ti%d", device_get_unit(dev));
|
|
sc->dev->si_drv1 = sc;
|
|
|
|
/*
|
|
* Call MI attach routine.
|
|
*/
|
|
ether_ifattach(ifp, eaddr);
|
|
|
|
/* VLAN capability setup. */
|
|
ifp->if_capabilities |= IFCAP_VLAN_MTU | IFCAP_VLAN_HWCSUM |
|
|
IFCAP_VLAN_HWTAGGING;
|
|
ifp->if_capenable = ifp->if_capabilities;
|
|
/* Tell the upper layer we support VLAN over-sized frames. */
|
|
ifp->if_hdrlen = sizeof(struct ether_vlan_header);
|
|
|
|
/* Driver supports link state tracking. */
|
|
ifp->if_capabilities |= IFCAP_LINKSTATE;
|
|
ifp->if_capenable |= IFCAP_LINKSTATE;
|
|
|
|
/* Hook interrupt last to avoid having to lock softc */
|
|
error = bus_setup_intr(dev, sc->ti_irq, INTR_TYPE_NET|INTR_MPSAFE,
|
|
NULL, ti_intr, sc, &sc->ti_intrhand);
|
|
|
|
if (error) {
|
|
device_printf(dev, "couldn't set up irq\n");
|
|
goto fail;
|
|
}
|
|
|
|
fail:
|
|
if (error)
|
|
ti_detach(dev);
|
|
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Shutdown hardware and free up resources. This can be called any
|
|
* time after the mutex has been initialized. It is called in both
|
|
* the error case in attach and the normal detach case so it needs
|
|
* to be careful about only freeing resources that have actually been
|
|
* allocated.
|
|
*/
|
|
static int
|
|
ti_detach(device_t dev)
|
|
{
|
|
struct ti_softc *sc;
|
|
struct ifnet *ifp;
|
|
|
|
sc = device_get_softc(dev);
|
|
if (sc->dev)
|
|
destroy_dev(sc->dev);
|
|
KASSERT(mtx_initialized(&sc->ti_mtx), ("ti mutex not initialized"));
|
|
ifp = sc->ti_ifp;
|
|
if (device_is_attached(dev)) {
|
|
ether_ifdetach(ifp);
|
|
TI_LOCK(sc);
|
|
ti_stop(sc);
|
|
TI_UNLOCK(sc);
|
|
}
|
|
|
|
/* These should only be active if attach succeeded */
|
|
callout_drain(&sc->ti_watchdog);
|
|
bus_generic_detach(dev);
|
|
ti_dma_free(sc);
|
|
ifmedia_removeall(&sc->ifmedia);
|
|
|
|
if (sc->ti_intrhand)
|
|
bus_teardown_intr(dev, sc->ti_irq, sc->ti_intrhand);
|
|
if (sc->ti_irq)
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->ti_irq);
|
|
if (sc->ti_res) {
|
|
bus_release_resource(dev, SYS_RES_MEMORY, PCIR_BAR(0),
|
|
sc->ti_res);
|
|
}
|
|
if (ifp)
|
|
if_free(ifp);
|
|
if (sc->ti_membuf)
|
|
free(sc->ti_membuf, M_DEVBUF);
|
|
if (sc->ti_membuf2)
|
|
free(sc->ti_membuf2, M_DEVBUF);
|
|
|
|
mtx_destroy(&sc->ti_mtx);
|
|
|
|
return (0);
|
|
}
|
|
|
|
#ifdef TI_JUMBO_HDRSPLIT
|
|
/*
|
|
* If hdr_len is 0, that means that header splitting wasn't done on
|
|
* this packet for some reason. The two most likely reasons are that
|
|
* the protocol isn't a supported protocol for splitting, or this
|
|
* packet had a fragment offset that wasn't 0.
|
|
*
|
|
* The header length, if it is non-zero, will always be the length of
|
|
* the headers on the packet, but that length could be longer than the
|
|
* first mbuf. So we take the minimum of the two as the actual
|
|
* length.
|
|
*/
|
|
static __inline void
|
|
ti_hdr_split(struct mbuf *top, int hdr_len, int pkt_len, int idx)
|
|
{
|
|
int i = 0;
|
|
int lengths[4] = {0, 0, 0, 0};
|
|
struct mbuf *m, *mp;
|
|
|
|
if (hdr_len != 0)
|
|
top->m_len = min(hdr_len, top->m_len);
|
|
pkt_len -= top->m_len;
|
|
lengths[i++] = top->m_len;
|
|
|
|
mp = top;
|
|
for (m = top->m_next; m && pkt_len; m = m->m_next) {
|
|
m->m_len = m->m_ext.ext_size = min(m->m_len, pkt_len);
|
|
pkt_len -= m->m_len;
|
|
lengths[i++] = m->m_len;
|
|
mp = m;
|
|
}
|
|
|
|
#if 0
|
|
if (hdr_len != 0)
|
|
printf("got split packet: ");
|
|
else
|
|
printf("got non-split packet: ");
|
|
|
|
printf("%d,%d,%d,%d = %d\n", lengths[0],
|
|
lengths[1], lengths[2], lengths[3],
|
|
lengths[0] + lengths[1] + lengths[2] +
|
|
lengths[3]);
|
|
#endif
|
|
|
|
if (pkt_len)
|
|
panic("header splitting didn't");
|
|
|
|
if (m) {
|
|
m_freem(m);
|
|
mp->m_next = NULL;
|
|
}
|
|
if (mp->m_next != NULL)
|
|
panic("ti_hdr_split: last mbuf in chain should be null");
|
|
}
|
|
#endif /* TI_JUMBO_HDRSPLIT */
|
|
|
|
static void
|
|
ti_discard_std(struct ti_softc *sc, int i)
|
|
{
|
|
|
|
struct ti_rx_desc *r;
|
|
|
|
r = &sc->ti_rdata.ti_rx_std_ring[i];
|
|
r->ti_len = MCLBYTES - ETHER_ALIGN;
|
|
r->ti_type = TI_BDTYPE_RECV_BD;
|
|
r->ti_flags = 0;
|
|
r->ti_vlan_tag = 0;
|
|
r->ti_tcp_udp_cksum = 0;
|
|
if (sc->ti_ifp->if_capenable & IFCAP_RXCSUM)
|
|
r->ti_flags |= TI_BDFLAG_TCP_UDP_CKSUM | TI_BDFLAG_IP_CKSUM;
|
|
r->ti_idx = i;
|
|
}
|
|
|
|
static void
|
|
ti_discard_mini(struct ti_softc *sc, int i)
|
|
{
|
|
|
|
struct ti_rx_desc *r;
|
|
|
|
r = &sc->ti_rdata.ti_rx_mini_ring[i];
|
|
r->ti_len = MHLEN - ETHER_ALIGN;
|
|
r->ti_type = TI_BDTYPE_RECV_BD;
|
|
r->ti_flags = TI_BDFLAG_MINI_RING;
|
|
r->ti_vlan_tag = 0;
|
|
r->ti_tcp_udp_cksum = 0;
|
|
if (sc->ti_ifp->if_capenable & IFCAP_RXCSUM)
|
|
r->ti_flags |= TI_BDFLAG_TCP_UDP_CKSUM | TI_BDFLAG_IP_CKSUM;
|
|
r->ti_idx = i;
|
|
}
|
|
|
|
#ifndef TI_SF_BUF_JUMBO
|
|
static void
|
|
ti_discard_jumbo(struct ti_softc *sc, int i)
|
|
{
|
|
|
|
struct ti_rx_desc *r;
|
|
|
|
r = &sc->ti_rdata.ti_rx_jumbo_ring[i];
|
|
r->ti_len = MJUM9BYTES - ETHER_ALIGN;
|
|
r->ti_type = TI_BDTYPE_RECV_JUMBO_BD;
|
|
r->ti_flags = TI_BDFLAG_JUMBO_RING;
|
|
r->ti_vlan_tag = 0;
|
|
r->ti_tcp_udp_cksum = 0;
|
|
if (sc->ti_ifp->if_capenable & IFCAP_RXCSUM)
|
|
r->ti_flags |= TI_BDFLAG_TCP_UDP_CKSUM | TI_BDFLAG_IP_CKSUM;
|
|
r->ti_idx = i;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Frame reception handling. This is called if there's a frame
|
|
* on the receive return list.
|
|
*
|
|
* Note: we have to be able to handle three possibilities here:
|
|
* 1) the frame is from the mini receive ring (can only happen)
|
|
* on Tigon 2 boards)
|
|
* 2) the frame is from the jumbo receive ring
|
|
* 3) the frame is from the standard receive ring
|
|
*/
|
|
|
|
static void
|
|
ti_rxeof(struct ti_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
#ifdef TI_SF_BUF_JUMBO
|
|
bus_dmamap_t map;
|
|
#endif
|
|
struct ti_cmd_desc cmd;
|
|
int jumbocnt, minicnt, stdcnt, ti_len;
|
|
|
|
TI_LOCK_ASSERT(sc);
|
|
|
|
ifp = sc->ti_ifp;
|
|
|
|
bus_dmamap_sync(sc->ti_cdata.ti_rx_std_ring_tag,
|
|
sc->ti_cdata.ti_rx_std_ring_map, BUS_DMASYNC_POSTWRITE);
|
|
if (ifp->if_mtu > ETHERMTU + ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN)
|
|
bus_dmamap_sync(sc->ti_cdata.ti_rx_jumbo_ring_tag,
|
|
sc->ti_cdata.ti_rx_jumbo_ring_map, BUS_DMASYNC_POSTWRITE);
|
|
if (sc->ti_rdata.ti_rx_mini_ring != NULL)
|
|
bus_dmamap_sync(sc->ti_cdata.ti_rx_mini_ring_tag,
|
|
sc->ti_cdata.ti_rx_mini_ring_map, BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_sync(sc->ti_cdata.ti_rx_return_ring_tag,
|
|
sc->ti_cdata.ti_rx_return_ring_map, BUS_DMASYNC_POSTREAD);
|
|
|
|
jumbocnt = minicnt = stdcnt = 0;
|
|
while (sc->ti_rx_saved_considx != sc->ti_return_prodidx.ti_idx) {
|
|
struct ti_rx_desc *cur_rx;
|
|
uint32_t rxidx;
|
|
struct mbuf *m = NULL;
|
|
uint16_t vlan_tag = 0;
|
|
int have_tag = 0;
|
|
|
|
cur_rx =
|
|
&sc->ti_rdata.ti_rx_return_ring[sc->ti_rx_saved_considx];
|
|
rxidx = cur_rx->ti_idx;
|
|
ti_len = cur_rx->ti_len;
|
|
TI_INC(sc->ti_rx_saved_considx, TI_RETURN_RING_CNT);
|
|
|
|
if (cur_rx->ti_flags & TI_BDFLAG_VLAN_TAG) {
|
|
have_tag = 1;
|
|
vlan_tag = cur_rx->ti_vlan_tag;
|
|
}
|
|
|
|
if (cur_rx->ti_flags & TI_BDFLAG_JUMBO_RING) {
|
|
jumbocnt++;
|
|
TI_INC(sc->ti_jumbo, TI_JUMBO_RX_RING_CNT);
|
|
m = sc->ti_cdata.ti_rx_jumbo_chain[rxidx];
|
|
#ifndef TI_SF_BUF_JUMBO
|
|
if (cur_rx->ti_flags & TI_BDFLAG_ERROR) {
|
|
if_inc_counter(ifp, IFCOUNTER_IERRORS, 1);
|
|
ti_discard_jumbo(sc, rxidx);
|
|
continue;
|
|
}
|
|
if (ti_newbuf_jumbo(sc, rxidx, NULL) != 0) {
|
|
if_inc_counter(ifp, IFCOUNTER_IQDROPS, 1);
|
|
ti_discard_jumbo(sc, rxidx);
|
|
continue;
|
|
}
|
|
m->m_len = ti_len;
|
|
#else /* !TI_SF_BUF_JUMBO */
|
|
sc->ti_cdata.ti_rx_jumbo_chain[rxidx] = NULL;
|
|
map = sc->ti_cdata.ti_rx_jumbo_maps[rxidx];
|
|
bus_dmamap_sync(sc->ti_cdata.ti_rx_jumbo_tag, map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(sc->ti_cdata.ti_rx_jumbo_tag, map);
|
|
if (cur_rx->ti_flags & TI_BDFLAG_ERROR) {
|
|
if_inc_counter(ifp, IFCOUNTER_IERRORS, 1);
|
|
ti_newbuf_jumbo(sc, sc->ti_jumbo, m);
|
|
continue;
|
|
}
|
|
if (ti_newbuf_jumbo(sc, sc->ti_jumbo, NULL) == ENOBUFS) {
|
|
if_inc_counter(ifp, IFCOUNTER_IQDROPS, 1);
|
|
ti_newbuf_jumbo(sc, sc->ti_jumbo, m);
|
|
continue;
|
|
}
|
|
#ifdef TI_JUMBO_HDRSPLIT
|
|
if (sc->ti_hdrsplit)
|
|
ti_hdr_split(m, TI_HOSTADDR(cur_rx->ti_addr),
|
|
ti_len, rxidx);
|
|
else
|
|
#endif /* TI_JUMBO_HDRSPLIT */
|
|
m_adj(m, ti_len - m->m_pkthdr.len);
|
|
#endif /* TI_SF_BUF_JUMBO */
|
|
} else if (cur_rx->ti_flags & TI_BDFLAG_MINI_RING) {
|
|
minicnt++;
|
|
TI_INC(sc->ti_mini, TI_MINI_RX_RING_CNT);
|
|
m = sc->ti_cdata.ti_rx_mini_chain[rxidx];
|
|
if (cur_rx->ti_flags & TI_BDFLAG_ERROR) {
|
|
if_inc_counter(ifp, IFCOUNTER_IERRORS, 1);
|
|
ti_discard_mini(sc, rxidx);
|
|
continue;
|
|
}
|
|
if (ti_newbuf_mini(sc, rxidx) != 0) {
|
|
if_inc_counter(ifp, IFCOUNTER_IQDROPS, 1);
|
|
ti_discard_mini(sc, rxidx);
|
|
continue;
|
|
}
|
|
m->m_len = ti_len;
|
|
} else {
|
|
stdcnt++;
|
|
TI_INC(sc->ti_std, TI_STD_RX_RING_CNT);
|
|
m = sc->ti_cdata.ti_rx_std_chain[rxidx];
|
|
if (cur_rx->ti_flags & TI_BDFLAG_ERROR) {
|
|
if_inc_counter(ifp, IFCOUNTER_IERRORS, 1);
|
|
ti_discard_std(sc, rxidx);
|
|
continue;
|
|
}
|
|
if (ti_newbuf_std(sc, rxidx) != 0) {
|
|
if_inc_counter(ifp, IFCOUNTER_IQDROPS, 1);
|
|
ti_discard_std(sc, rxidx);
|
|
continue;
|
|
}
|
|
m->m_len = ti_len;
|
|
}
|
|
|
|
m->m_pkthdr.len = ti_len;
|
|
if_inc_counter(ifp, IFCOUNTER_IPACKETS, 1);
|
|
m->m_pkthdr.rcvif = ifp;
|
|
|
|
if (ifp->if_capenable & IFCAP_RXCSUM) {
|
|
if (cur_rx->ti_flags & TI_BDFLAG_IP_CKSUM) {
|
|
m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED;
|
|
if ((cur_rx->ti_ip_cksum ^ 0xffff) == 0)
|
|
m->m_pkthdr.csum_flags |= CSUM_IP_VALID;
|
|
}
|
|
if (cur_rx->ti_flags & TI_BDFLAG_TCP_UDP_CKSUM) {
|
|
m->m_pkthdr.csum_data =
|
|
cur_rx->ti_tcp_udp_cksum;
|
|
m->m_pkthdr.csum_flags |= CSUM_DATA_VALID;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If we received a packet with a vlan tag,
|
|
* tag it before passing the packet upward.
|
|
*/
|
|
if (have_tag) {
|
|
m->m_pkthdr.ether_vtag = vlan_tag;
|
|
m->m_flags |= M_VLANTAG;
|
|
}
|
|
TI_UNLOCK(sc);
|
|
(*ifp->if_input)(ifp, m);
|
|
TI_LOCK(sc);
|
|
}
|
|
|
|
bus_dmamap_sync(sc->ti_cdata.ti_rx_return_ring_tag,
|
|
sc->ti_cdata.ti_rx_return_ring_map, BUS_DMASYNC_PREREAD);
|
|
/* Only necessary on the Tigon 1. */
|
|
if (sc->ti_hwrev == TI_HWREV_TIGON)
|
|
CSR_WRITE_4(sc, TI_GCR_RXRETURNCONS_IDX,
|
|
sc->ti_rx_saved_considx);
|
|
|
|
if (stdcnt > 0) {
|
|
bus_dmamap_sync(sc->ti_cdata.ti_rx_std_ring_tag,
|
|
sc->ti_cdata.ti_rx_std_ring_map, BUS_DMASYNC_PREWRITE);
|
|
TI_UPDATE_STDPROD(sc, sc->ti_std);
|
|
}
|
|
if (minicnt > 0) {
|
|
bus_dmamap_sync(sc->ti_cdata.ti_rx_mini_ring_tag,
|
|
sc->ti_cdata.ti_rx_mini_ring_map, BUS_DMASYNC_PREWRITE);
|
|
TI_UPDATE_MINIPROD(sc, sc->ti_mini);
|
|
}
|
|
if (jumbocnt > 0) {
|
|
bus_dmamap_sync(sc->ti_cdata.ti_rx_jumbo_ring_tag,
|
|
sc->ti_cdata.ti_rx_jumbo_ring_map, BUS_DMASYNC_PREWRITE);
|
|
TI_UPDATE_JUMBOPROD(sc, sc->ti_jumbo);
|
|
}
|
|
}
|
|
|
|
static void
|
|
ti_txeof(struct ti_softc *sc)
|
|
{
|
|
struct ti_txdesc *txd;
|
|
struct ti_tx_desc txdesc;
|
|
struct ti_tx_desc *cur_tx = NULL;
|
|
struct ifnet *ifp;
|
|
int idx;
|
|
|
|
ifp = sc->ti_ifp;
|
|
|
|
txd = STAILQ_FIRST(&sc->ti_cdata.ti_txbusyq);
|
|
if (txd == NULL)
|
|
return;
|
|
|
|
if (sc->ti_rdata.ti_tx_ring != NULL)
|
|
bus_dmamap_sync(sc->ti_cdata.ti_tx_ring_tag,
|
|
sc->ti_cdata.ti_tx_ring_map, BUS_DMASYNC_POSTWRITE);
|
|
/*
|
|
* Go through our tx ring and free mbufs for those
|
|
* frames that have been sent.
|
|
*/
|
|
for (idx = sc->ti_tx_saved_considx; idx != sc->ti_tx_considx.ti_idx;
|
|
TI_INC(idx, TI_TX_RING_CNT)) {
|
|
if (sc->ti_hwrev == TI_HWREV_TIGON) {
|
|
ti_mem_read(sc, TI_TX_RING_BASE + idx * sizeof(txdesc),
|
|
sizeof(txdesc), &txdesc);
|
|
cur_tx = &txdesc;
|
|
} else
|
|
cur_tx = &sc->ti_rdata.ti_tx_ring[idx];
|
|
sc->ti_txcnt--;
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
if ((cur_tx->ti_flags & TI_BDFLAG_END) == 0)
|
|
continue;
|
|
bus_dmamap_sync(sc->ti_cdata.ti_tx_tag, txd->tx_dmamap,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(sc->ti_cdata.ti_tx_tag, txd->tx_dmamap);
|
|
|
|
if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1);
|
|
m_freem(txd->tx_m);
|
|
txd->tx_m = NULL;
|
|
STAILQ_REMOVE_HEAD(&sc->ti_cdata.ti_txbusyq, tx_q);
|
|
STAILQ_INSERT_TAIL(&sc->ti_cdata.ti_txfreeq, txd, tx_q);
|
|
txd = STAILQ_FIRST(&sc->ti_cdata.ti_txbusyq);
|
|
}
|
|
sc->ti_tx_saved_considx = idx;
|
|
if (sc->ti_txcnt == 0)
|
|
sc->ti_timer = 0;
|
|
}
|
|
|
|
static void
|
|
ti_intr(void *xsc)
|
|
{
|
|
struct ti_softc *sc;
|
|
struct ifnet *ifp;
|
|
|
|
sc = xsc;
|
|
TI_LOCK(sc);
|
|
ifp = sc->ti_ifp;
|
|
|
|
/* Make sure this is really our interrupt. */
|
|
if (!(CSR_READ_4(sc, TI_MISC_HOST_CTL) & TI_MHC_INTSTATE)) {
|
|
TI_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
/* Ack interrupt and stop others from occurring. */
|
|
CSR_WRITE_4(sc, TI_MB_HOSTINTR, 1);
|
|
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
bus_dmamap_sync(sc->ti_cdata.ti_status_tag,
|
|
sc->ti_cdata.ti_status_map, BUS_DMASYNC_POSTREAD);
|
|
/* Check RX return ring producer/consumer */
|
|
ti_rxeof(sc);
|
|
|
|
/* Check TX ring producer/consumer */
|
|
ti_txeof(sc);
|
|
bus_dmamap_sync(sc->ti_cdata.ti_status_tag,
|
|
sc->ti_cdata.ti_status_map, BUS_DMASYNC_PREREAD);
|
|
}
|
|
|
|
ti_handle_events(sc);
|
|
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
/* Re-enable interrupts. */
|
|
CSR_WRITE_4(sc, TI_MB_HOSTINTR, 0);
|
|
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
|
|
ti_start_locked(ifp);
|
|
}
|
|
|
|
TI_UNLOCK(sc);
|
|
}
|
|
|
|
static uint64_t
|
|
ti_get_counter(struct ifnet *ifp, ift_counter cnt)
|
|
{
|
|
|
|
switch (cnt) {
|
|
case IFCOUNTER_COLLISIONS:
|
|
{
|
|
struct ti_softc *sc;
|
|
struct ti_stats *s;
|
|
uint64_t rv;
|
|
|
|
sc = if_getsoftc(ifp);
|
|
s = &sc->ti_rdata.ti_info->ti_stats;
|
|
|
|
TI_LOCK(sc);
|
|
bus_dmamap_sync(sc->ti_cdata.ti_gib_tag,
|
|
sc->ti_cdata.ti_gib_map, BUS_DMASYNC_POSTREAD);
|
|
rv = s->dot3StatsSingleCollisionFrames +
|
|
s->dot3StatsMultipleCollisionFrames +
|
|
s->dot3StatsExcessiveCollisions +
|
|
s->dot3StatsLateCollisions;
|
|
bus_dmamap_sync(sc->ti_cdata.ti_gib_tag,
|
|
sc->ti_cdata.ti_gib_map, BUS_DMASYNC_PREREAD);
|
|
TI_UNLOCK(sc);
|
|
return (rv);
|
|
}
|
|
default:
|
|
return (if_get_counter_default(ifp, cnt));
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Encapsulate an mbuf chain in the tx ring by coupling the mbuf data
|
|
* pointers to descriptors.
|
|
*/
|
|
static int
|
|
ti_encap(struct ti_softc *sc, struct mbuf **m_head)
|
|
{
|
|
struct ti_txdesc *txd;
|
|
struct ti_tx_desc *f;
|
|
struct ti_tx_desc txdesc;
|
|
struct mbuf *m;
|
|
bus_dma_segment_t txsegs[TI_MAXTXSEGS];
|
|
uint16_t csum_flags;
|
|
int error, frag, i, nseg;
|
|
|
|
if ((txd = STAILQ_FIRST(&sc->ti_cdata.ti_txfreeq)) == NULL)
|
|
return (ENOBUFS);
|
|
|
|
error = bus_dmamap_load_mbuf_sg(sc->ti_cdata.ti_tx_tag, txd->tx_dmamap,
|
|
*m_head, txsegs, &nseg, 0);
|
|
if (error == EFBIG) {
|
|
m = m_defrag(*m_head, M_NOWAIT);
|
|
if (m == NULL) {
|
|
m_freem(*m_head);
|
|
*m_head = NULL;
|
|
return (ENOMEM);
|
|
}
|
|
*m_head = m;
|
|
error = bus_dmamap_load_mbuf_sg(sc->ti_cdata.ti_tx_tag,
|
|
txd->tx_dmamap, *m_head, txsegs, &nseg, 0);
|
|
if (error) {
|
|
m_freem(*m_head);
|
|
*m_head = NULL;
|
|
return (error);
|
|
}
|
|
} else if (error != 0)
|
|
return (error);
|
|
if (nseg == 0) {
|
|
m_freem(*m_head);
|
|
*m_head = NULL;
|
|
return (EIO);
|
|
}
|
|
|
|
if (sc->ti_txcnt + nseg >= TI_TX_RING_CNT) {
|
|
bus_dmamap_unload(sc->ti_cdata.ti_tx_tag, txd->tx_dmamap);
|
|
return (ENOBUFS);
|
|
}
|
|
bus_dmamap_sync(sc->ti_cdata.ti_tx_tag, txd->tx_dmamap,
|
|
BUS_DMASYNC_PREWRITE);
|
|
|
|
m = *m_head;
|
|
csum_flags = 0;
|
|
if (m->m_pkthdr.csum_flags & CSUM_IP)
|
|
csum_flags |= TI_BDFLAG_IP_CKSUM;
|
|
if (m->m_pkthdr.csum_flags & (CSUM_TCP | CSUM_UDP))
|
|
csum_flags |= TI_BDFLAG_TCP_UDP_CKSUM;
|
|
|
|
frag = sc->ti_tx_saved_prodidx;
|
|
for (i = 0; i < nseg; i++) {
|
|
if (sc->ti_hwrev == TI_HWREV_TIGON) {
|
|
bzero(&txdesc, sizeof(txdesc));
|
|
f = &txdesc;
|
|
} else
|
|
f = &sc->ti_rdata.ti_tx_ring[frag];
|
|
ti_hostaddr64(&f->ti_addr, txsegs[i].ds_addr);
|
|
f->ti_len = txsegs[i].ds_len;
|
|
f->ti_flags = csum_flags;
|
|
if (m->m_flags & M_VLANTAG) {
|
|
f->ti_flags |= TI_BDFLAG_VLAN_TAG;
|
|
f->ti_vlan_tag = m->m_pkthdr.ether_vtag;
|
|
} else {
|
|
f->ti_vlan_tag = 0;
|
|
}
|
|
|
|
if (sc->ti_hwrev == TI_HWREV_TIGON)
|
|
ti_mem_write(sc, TI_TX_RING_BASE + frag *
|
|
sizeof(txdesc), sizeof(txdesc), &txdesc);
|
|
TI_INC(frag, TI_TX_RING_CNT);
|
|
}
|
|
|
|
sc->ti_tx_saved_prodidx = frag;
|
|
/* set TI_BDFLAG_END on the last descriptor */
|
|
frag = (frag + TI_TX_RING_CNT - 1) % TI_TX_RING_CNT;
|
|
if (sc->ti_hwrev == TI_HWREV_TIGON) {
|
|
txdesc.ti_flags |= TI_BDFLAG_END;
|
|
ti_mem_write(sc, TI_TX_RING_BASE + frag * sizeof(txdesc),
|
|
sizeof(txdesc), &txdesc);
|
|
} else
|
|
sc->ti_rdata.ti_tx_ring[frag].ti_flags |= TI_BDFLAG_END;
|
|
|
|
STAILQ_REMOVE_HEAD(&sc->ti_cdata.ti_txfreeq, tx_q);
|
|
STAILQ_INSERT_TAIL(&sc->ti_cdata.ti_txbusyq, txd, tx_q);
|
|
txd->tx_m = m;
|
|
sc->ti_txcnt += nseg;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
ti_start(struct ifnet *ifp)
|
|
{
|
|
struct ti_softc *sc;
|
|
|
|
sc = ifp->if_softc;
|
|
TI_LOCK(sc);
|
|
ti_start_locked(ifp);
|
|
TI_UNLOCK(sc);
|
|
}
|
|
|
|
/*
|
|
* Main transmit routine. To avoid having to do mbuf copies, we put pointers
|
|
* to the mbuf data regions directly in the transmit descriptors.
|
|
*/
|
|
static void
|
|
ti_start_locked(struct ifnet *ifp)
|
|
{
|
|
struct ti_softc *sc;
|
|
struct mbuf *m_head = NULL;
|
|
int enq = 0;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
for (; !IFQ_DRV_IS_EMPTY(&ifp->if_snd) &&
|
|
sc->ti_txcnt < (TI_TX_RING_CNT - 16);) {
|
|
IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head);
|
|
if (m_head == NULL)
|
|
break;
|
|
|
|
/*
|
|
* Pack the data into the transmit ring. If we
|
|
* don't have room, set the OACTIVE flag and wait
|
|
* for the NIC to drain the ring.
|
|
*/
|
|
if (ti_encap(sc, &m_head)) {
|
|
if (m_head == NULL)
|
|
break;
|
|
IFQ_DRV_PREPEND(&ifp->if_snd, m_head);
|
|
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
|
|
break;
|
|
}
|
|
|
|
enq++;
|
|
/*
|
|
* If there's a BPF listener, bounce a copy of this frame
|
|
* to him.
|
|
*/
|
|
ETHER_BPF_MTAP(ifp, m_head);
|
|
}
|
|
|
|
if (enq > 0) {
|
|
if (sc->ti_rdata.ti_tx_ring != NULL)
|
|
bus_dmamap_sync(sc->ti_cdata.ti_tx_ring_tag,
|
|
sc->ti_cdata.ti_tx_ring_map, BUS_DMASYNC_PREWRITE);
|
|
/* Transmit */
|
|
CSR_WRITE_4(sc, TI_MB_SENDPROD_IDX, sc->ti_tx_saved_prodidx);
|
|
|
|
/*
|
|
* Set a timeout in case the chip goes out to lunch.
|
|
*/
|
|
sc->ti_timer = 5;
|
|
}
|
|
}
|
|
|
|
static void
|
|
ti_init(void *xsc)
|
|
{
|
|
struct ti_softc *sc;
|
|
|
|
sc = xsc;
|
|
TI_LOCK(sc);
|
|
ti_init_locked(sc);
|
|
TI_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
ti_init_locked(void *xsc)
|
|
{
|
|
struct ti_softc *sc = xsc;
|
|
|
|
if (sc->ti_ifp->if_drv_flags & IFF_DRV_RUNNING)
|
|
return;
|
|
|
|
/* Cancel pending I/O and flush buffers. */
|
|
ti_stop(sc);
|
|
|
|
/* Init the gen info block, ring control blocks and firmware. */
|
|
if (ti_gibinit(sc)) {
|
|
device_printf(sc->ti_dev, "initialization failure\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
static void ti_init2(struct ti_softc *sc)
|
|
{
|
|
struct ti_cmd_desc cmd;
|
|
struct ifnet *ifp;
|
|
uint8_t *ea;
|
|
struct ifmedia *ifm;
|
|
int tmp;
|
|
|
|
TI_LOCK_ASSERT(sc);
|
|
|
|
ifp = sc->ti_ifp;
|
|
|
|
/* Specify MTU and interface index. */
|
|
CSR_WRITE_4(sc, TI_GCR_IFINDEX, device_get_unit(sc->ti_dev));
|
|
CSR_WRITE_4(sc, TI_GCR_IFMTU, ifp->if_mtu +
|
|
ETHER_HDR_LEN + ETHER_CRC_LEN + ETHER_VLAN_ENCAP_LEN);
|
|
TI_DO_CMD(TI_CMD_UPDATE_GENCOM, 0, 0);
|
|
|
|
/* Load our MAC address. */
|
|
ea = IF_LLADDR(sc->ti_ifp);
|
|
CSR_WRITE_4(sc, TI_GCR_PAR0, (ea[0] << 8) | ea[1]);
|
|
CSR_WRITE_4(sc, TI_GCR_PAR1,
|
|
(ea[2] << 24) | (ea[3] << 16) | (ea[4] << 8) | ea[5]);
|
|
TI_DO_CMD(TI_CMD_SET_MAC_ADDR, 0, 0);
|
|
|
|
/* Enable or disable promiscuous mode as needed. */
|
|
if (ifp->if_flags & IFF_PROMISC) {
|
|
TI_DO_CMD(TI_CMD_SET_PROMISC_MODE, TI_CMD_CODE_PROMISC_ENB, 0);
|
|
} else {
|
|
TI_DO_CMD(TI_CMD_SET_PROMISC_MODE, TI_CMD_CODE_PROMISC_DIS, 0);
|
|
}
|
|
|
|
/* Program multicast filter. */
|
|
ti_setmulti(sc);
|
|
|
|
/*
|
|
* If this is a Tigon 1, we should tell the
|
|
* firmware to use software packet filtering.
|
|
*/
|
|
if (sc->ti_hwrev == TI_HWREV_TIGON) {
|
|
TI_DO_CMD(TI_CMD_FDR_FILTERING, TI_CMD_CODE_FILT_ENB, 0);
|
|
}
|
|
|
|
/* Init RX ring. */
|
|
if (ti_init_rx_ring_std(sc) != 0) {
|
|
/* XXX */
|
|
device_printf(sc->ti_dev, "no memory for std Rx buffers.\n");
|
|
return;
|
|
}
|
|
|
|
/* Init jumbo RX ring. */
|
|
if (ifp->if_mtu > ETHERMTU + ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN) {
|
|
if (ti_init_rx_ring_jumbo(sc) != 0) {
|
|
/* XXX */
|
|
device_printf(sc->ti_dev,
|
|
"no memory for jumbo Rx buffers.\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If this is a Tigon 2, we can also configure the
|
|
* mini ring.
|
|
*/
|
|
if (sc->ti_hwrev == TI_HWREV_TIGON_II) {
|
|
if (ti_init_rx_ring_mini(sc) != 0) {
|
|
/* XXX */
|
|
device_printf(sc->ti_dev,
|
|
"no memory for mini Rx buffers.\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
CSR_WRITE_4(sc, TI_GCR_RXRETURNCONS_IDX, 0);
|
|
sc->ti_rx_saved_considx = 0;
|
|
|
|
/* Init TX ring. */
|
|
ti_init_tx_ring(sc);
|
|
|
|
/* Tell firmware we're alive. */
|
|
TI_DO_CMD(TI_CMD_HOST_STATE, TI_CMD_CODE_STACK_UP, 0);
|
|
|
|
/* Enable host interrupts. */
|
|
CSR_WRITE_4(sc, TI_MB_HOSTINTR, 0);
|
|
|
|
ifp->if_drv_flags |= IFF_DRV_RUNNING;
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
callout_reset(&sc->ti_watchdog, hz, ti_watchdog, sc);
|
|
|
|
/*
|
|
* Make sure to set media properly. We have to do this
|
|
* here since we have to issue commands in order to set
|
|
* the link negotiation and we can't issue commands until
|
|
* the firmware is running.
|
|
*/
|
|
ifm = &sc->ifmedia;
|
|
tmp = ifm->ifm_media;
|
|
ifm->ifm_media = ifm->ifm_cur->ifm_media;
|
|
ti_ifmedia_upd_locked(sc);
|
|
ifm->ifm_media = tmp;
|
|
}
|
|
|
|
/*
|
|
* Set media options.
|
|
*/
|
|
static int
|
|
ti_ifmedia_upd(struct ifnet *ifp)
|
|
{
|
|
struct ti_softc *sc;
|
|
int error;
|
|
|
|
sc = ifp->if_softc;
|
|
TI_LOCK(sc);
|
|
error = ti_ifmedia_upd_locked(sc);
|
|
TI_UNLOCK(sc);
|
|
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
ti_ifmedia_upd_locked(struct ti_softc *sc)
|
|
{
|
|
struct ifmedia *ifm;
|
|
struct ti_cmd_desc cmd;
|
|
uint32_t flowctl;
|
|
|
|
ifm = &sc->ifmedia;
|
|
|
|
if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER)
|
|
return (EINVAL);
|
|
|
|
flowctl = 0;
|
|
|
|
switch (IFM_SUBTYPE(ifm->ifm_media)) {
|
|
case IFM_AUTO:
|
|
/*
|
|
* Transmit flow control doesn't work on the Tigon 1.
|
|
*/
|
|
flowctl = TI_GLNK_RX_FLOWCTL_Y;
|
|
|
|
/*
|
|
* Transmit flow control can also cause problems on the
|
|
* Tigon 2, apparently with both the copper and fiber
|
|
* boards. The symptom is that the interface will just
|
|
* hang. This was reproduced with Alteon 180 switches.
|
|
*/
|
|
#if 0
|
|
if (sc->ti_hwrev != TI_HWREV_TIGON)
|
|
flowctl |= TI_GLNK_TX_FLOWCTL_Y;
|
|
#endif
|
|
|
|
CSR_WRITE_4(sc, TI_GCR_GLINK, TI_GLNK_PREF|TI_GLNK_1000MB|
|
|
TI_GLNK_FULL_DUPLEX| flowctl |
|
|
TI_GLNK_AUTONEGENB|TI_GLNK_ENB);
|
|
|
|
flowctl = TI_LNK_RX_FLOWCTL_Y;
|
|
#if 0
|
|
if (sc->ti_hwrev != TI_HWREV_TIGON)
|
|
flowctl |= TI_LNK_TX_FLOWCTL_Y;
|
|
#endif
|
|
|
|
CSR_WRITE_4(sc, TI_GCR_LINK, TI_LNK_100MB|TI_LNK_10MB|
|
|
TI_LNK_FULL_DUPLEX|TI_LNK_HALF_DUPLEX| flowctl |
|
|
TI_LNK_AUTONEGENB|TI_LNK_ENB);
|
|
TI_DO_CMD(TI_CMD_LINK_NEGOTIATION,
|
|
TI_CMD_CODE_NEGOTIATE_BOTH, 0);
|
|
break;
|
|
case IFM_1000_SX:
|
|
case IFM_1000_T:
|
|
flowctl = TI_GLNK_RX_FLOWCTL_Y;
|
|
#if 0
|
|
if (sc->ti_hwrev != TI_HWREV_TIGON)
|
|
flowctl |= TI_GLNK_TX_FLOWCTL_Y;
|
|
#endif
|
|
|
|
CSR_WRITE_4(sc, TI_GCR_GLINK, TI_GLNK_PREF|TI_GLNK_1000MB|
|
|
flowctl |TI_GLNK_ENB);
|
|
CSR_WRITE_4(sc, TI_GCR_LINK, 0);
|
|
if ((ifm->ifm_media & IFM_GMASK) == IFM_FDX) {
|
|
TI_SETBIT(sc, TI_GCR_GLINK, TI_GLNK_FULL_DUPLEX);
|
|
}
|
|
TI_DO_CMD(TI_CMD_LINK_NEGOTIATION,
|
|
TI_CMD_CODE_NEGOTIATE_GIGABIT, 0);
|
|
break;
|
|
case IFM_100_FX:
|
|
case IFM_10_FL:
|
|
case IFM_100_TX:
|
|
case IFM_10_T:
|
|
flowctl = TI_LNK_RX_FLOWCTL_Y;
|
|
#if 0
|
|
if (sc->ti_hwrev != TI_HWREV_TIGON)
|
|
flowctl |= TI_LNK_TX_FLOWCTL_Y;
|
|
#endif
|
|
|
|
CSR_WRITE_4(sc, TI_GCR_GLINK, 0);
|
|
CSR_WRITE_4(sc, TI_GCR_LINK, TI_LNK_ENB|TI_LNK_PREF|flowctl);
|
|
if (IFM_SUBTYPE(ifm->ifm_media) == IFM_100_FX ||
|
|
IFM_SUBTYPE(ifm->ifm_media) == IFM_100_TX) {
|
|
TI_SETBIT(sc, TI_GCR_LINK, TI_LNK_100MB);
|
|
} else {
|
|
TI_SETBIT(sc, TI_GCR_LINK, TI_LNK_10MB);
|
|
}
|
|
if ((ifm->ifm_media & IFM_GMASK) == IFM_FDX) {
|
|
TI_SETBIT(sc, TI_GCR_LINK, TI_LNK_FULL_DUPLEX);
|
|
} else {
|
|
TI_SETBIT(sc, TI_GCR_LINK, TI_LNK_HALF_DUPLEX);
|
|
}
|
|
TI_DO_CMD(TI_CMD_LINK_NEGOTIATION,
|
|
TI_CMD_CODE_NEGOTIATE_10_100, 0);
|
|
break;
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Report current media status.
|
|
*/
|
|
static void
|
|
ti_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
|
|
{
|
|
struct ti_softc *sc;
|
|
uint32_t media = 0;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
TI_LOCK(sc);
|
|
|
|
ifmr->ifm_status = IFM_AVALID;
|
|
ifmr->ifm_active = IFM_ETHER;
|
|
|
|
if (sc->ti_linkstat == TI_EV_CODE_LINK_DOWN) {
|
|
TI_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
ifmr->ifm_status |= IFM_ACTIVE;
|
|
|
|
if (sc->ti_linkstat == TI_EV_CODE_GIG_LINK_UP) {
|
|
media = CSR_READ_4(sc, TI_GCR_GLINK_STAT);
|
|
if (sc->ti_copper)
|
|
ifmr->ifm_active |= IFM_1000_T;
|
|
else
|
|
ifmr->ifm_active |= IFM_1000_SX;
|
|
if (media & TI_GLNK_FULL_DUPLEX)
|
|
ifmr->ifm_active |= IFM_FDX;
|
|
else
|
|
ifmr->ifm_active |= IFM_HDX;
|
|
} else if (sc->ti_linkstat == TI_EV_CODE_LINK_UP) {
|
|
media = CSR_READ_4(sc, TI_GCR_LINK_STAT);
|
|
if (sc->ti_copper) {
|
|
if (media & TI_LNK_100MB)
|
|
ifmr->ifm_active |= IFM_100_TX;
|
|
if (media & TI_LNK_10MB)
|
|
ifmr->ifm_active |= IFM_10_T;
|
|
} else {
|
|
if (media & TI_LNK_100MB)
|
|
ifmr->ifm_active |= IFM_100_FX;
|
|
if (media & TI_LNK_10MB)
|
|
ifmr->ifm_active |= IFM_10_FL;
|
|
}
|
|
if (media & TI_LNK_FULL_DUPLEX)
|
|
ifmr->ifm_active |= IFM_FDX;
|
|
if (media & TI_LNK_HALF_DUPLEX)
|
|
ifmr->ifm_active |= IFM_HDX;
|
|
}
|
|
TI_UNLOCK(sc);
|
|
}
|
|
|
|
static int
|
|
ti_ioctl(struct ifnet *ifp, u_long command, caddr_t data)
|
|
{
|
|
struct ti_softc *sc = ifp->if_softc;
|
|
struct ifreq *ifr = (struct ifreq *) data;
|
|
struct ti_cmd_desc cmd;
|
|
int mask, error = 0;
|
|
|
|
switch (command) {
|
|
case SIOCSIFMTU:
|
|
TI_LOCK(sc);
|
|
if (ifr->ifr_mtu < ETHERMIN || ifr->ifr_mtu > TI_JUMBO_MTU)
|
|
error = EINVAL;
|
|
else {
|
|
ifp->if_mtu = ifr->ifr_mtu;
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
ti_init_locked(sc);
|
|
}
|
|
}
|
|
TI_UNLOCK(sc);
|
|
break;
|
|
case SIOCSIFFLAGS:
|
|
TI_LOCK(sc);
|
|
if (ifp->if_flags & IFF_UP) {
|
|
/*
|
|
* If only the state of the PROMISC flag changed,
|
|
* then just use the 'set promisc mode' command
|
|
* instead of reinitializing the entire NIC. Doing
|
|
* a full re-init means reloading the firmware and
|
|
* waiting for it to start up, which may take a
|
|
* second or two.
|
|
*/
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING &&
|
|
ifp->if_flags & IFF_PROMISC &&
|
|
!(sc->ti_if_flags & IFF_PROMISC)) {
|
|
TI_DO_CMD(TI_CMD_SET_PROMISC_MODE,
|
|
TI_CMD_CODE_PROMISC_ENB, 0);
|
|
} else if (ifp->if_drv_flags & IFF_DRV_RUNNING &&
|
|
!(ifp->if_flags & IFF_PROMISC) &&
|
|
sc->ti_if_flags & IFF_PROMISC) {
|
|
TI_DO_CMD(TI_CMD_SET_PROMISC_MODE,
|
|
TI_CMD_CODE_PROMISC_DIS, 0);
|
|
} else
|
|
ti_init_locked(sc);
|
|
} else {
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
ti_stop(sc);
|
|
}
|
|
}
|
|
sc->ti_if_flags = ifp->if_flags;
|
|
TI_UNLOCK(sc);
|
|
break;
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
TI_LOCK(sc);
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
|
|
ti_setmulti(sc);
|
|
TI_UNLOCK(sc);
|
|
break;
|
|
case SIOCSIFMEDIA:
|
|
case SIOCGIFMEDIA:
|
|
error = ifmedia_ioctl(ifp, ifr, &sc->ifmedia, command);
|
|
break;
|
|
case SIOCSIFCAP:
|
|
TI_LOCK(sc);
|
|
mask = ifr->ifr_reqcap ^ ifp->if_capenable;
|
|
if ((mask & IFCAP_TXCSUM) != 0 &&
|
|
(ifp->if_capabilities & IFCAP_TXCSUM) != 0) {
|
|
ifp->if_capenable ^= IFCAP_TXCSUM;
|
|
if ((ifp->if_capenable & IFCAP_TXCSUM) != 0)
|
|
ifp->if_hwassist |= TI_CSUM_FEATURES;
|
|
else
|
|
ifp->if_hwassist &= ~TI_CSUM_FEATURES;
|
|
}
|
|
if ((mask & IFCAP_RXCSUM) != 0 &&
|
|
(ifp->if_capabilities & IFCAP_RXCSUM) != 0)
|
|
ifp->if_capenable ^= IFCAP_RXCSUM;
|
|
if ((mask & IFCAP_VLAN_HWTAGGING) != 0 &&
|
|
(ifp->if_capabilities & IFCAP_VLAN_HWTAGGING) != 0)
|
|
ifp->if_capenable ^= IFCAP_VLAN_HWTAGGING;
|
|
if ((mask & IFCAP_VLAN_HWCSUM) != 0 &&
|
|
(ifp->if_capabilities & IFCAP_VLAN_HWCSUM) != 0)
|
|
ifp->if_capenable ^= IFCAP_VLAN_HWCSUM;
|
|
if ((mask & (IFCAP_TXCSUM | IFCAP_RXCSUM |
|
|
IFCAP_VLAN_HWTAGGING)) != 0) {
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
ti_init_locked(sc);
|
|
}
|
|
}
|
|
TI_UNLOCK(sc);
|
|
VLAN_CAPABILITIES(ifp);
|
|
break;
|
|
default:
|
|
error = ether_ioctl(ifp, command, data);
|
|
break;
|
|
}
|
|
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
ti_open(struct cdev *dev, int flags, int fmt, struct thread *td)
|
|
{
|
|
struct ti_softc *sc;
|
|
|
|
sc = dev->si_drv1;
|
|
if (sc == NULL)
|
|
return (ENODEV);
|
|
|
|
TI_LOCK(sc);
|
|
sc->ti_flags |= TI_FLAG_DEBUGING;
|
|
TI_UNLOCK(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
ti_close(struct cdev *dev, int flag, int fmt, struct thread *td)
|
|
{
|
|
struct ti_softc *sc;
|
|
|
|
sc = dev->si_drv1;
|
|
if (sc == NULL)
|
|
return (ENODEV);
|
|
|
|
TI_LOCK(sc);
|
|
sc->ti_flags &= ~TI_FLAG_DEBUGING;
|
|
TI_UNLOCK(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* This ioctl routine goes along with the Tigon character device.
|
|
*/
|
|
static int
|
|
ti_ioctl2(struct cdev *dev, u_long cmd, caddr_t addr, int flag,
|
|
struct thread *td)
|
|
{
|
|
struct ti_softc *sc;
|
|
int error;
|
|
|
|
sc = dev->si_drv1;
|
|
if (sc == NULL)
|
|
return (ENODEV);
|
|
|
|
error = 0;
|
|
|
|
switch (cmd) {
|
|
case TIIOCGETSTATS:
|
|
{
|
|
struct ti_stats *outstats;
|
|
|
|
outstats = (struct ti_stats *)addr;
|
|
|
|
TI_LOCK(sc);
|
|
bus_dmamap_sync(sc->ti_cdata.ti_gib_tag,
|
|
sc->ti_cdata.ti_gib_map, BUS_DMASYNC_POSTREAD);
|
|
bcopy(&sc->ti_rdata.ti_info->ti_stats, outstats,
|
|
sizeof(struct ti_stats));
|
|
bus_dmamap_sync(sc->ti_cdata.ti_gib_tag,
|
|
sc->ti_cdata.ti_gib_map, BUS_DMASYNC_PREREAD);
|
|
TI_UNLOCK(sc);
|
|
break;
|
|
}
|
|
case TIIOCGETPARAMS:
|
|
{
|
|
struct ti_params *params;
|
|
|
|
params = (struct ti_params *)addr;
|
|
|
|
TI_LOCK(sc);
|
|
params->ti_stat_ticks = sc->ti_stat_ticks;
|
|
params->ti_rx_coal_ticks = sc->ti_rx_coal_ticks;
|
|
params->ti_tx_coal_ticks = sc->ti_tx_coal_ticks;
|
|
params->ti_rx_max_coal_bds = sc->ti_rx_max_coal_bds;
|
|
params->ti_tx_max_coal_bds = sc->ti_tx_max_coal_bds;
|
|
params->ti_tx_buf_ratio = sc->ti_tx_buf_ratio;
|
|
params->param_mask = TI_PARAM_ALL;
|
|
TI_UNLOCK(sc);
|
|
break;
|
|
}
|
|
case TIIOCSETPARAMS:
|
|
{
|
|
struct ti_params *params;
|
|
|
|
params = (struct ti_params *)addr;
|
|
|
|
TI_LOCK(sc);
|
|
if (params->param_mask & TI_PARAM_STAT_TICKS) {
|
|
sc->ti_stat_ticks = params->ti_stat_ticks;
|
|
CSR_WRITE_4(sc, TI_GCR_STAT_TICKS, sc->ti_stat_ticks);
|
|
}
|
|
|
|
if (params->param_mask & TI_PARAM_RX_COAL_TICKS) {
|
|
sc->ti_rx_coal_ticks = params->ti_rx_coal_ticks;
|
|
CSR_WRITE_4(sc, TI_GCR_RX_COAL_TICKS,
|
|
sc->ti_rx_coal_ticks);
|
|
}
|
|
|
|
if (params->param_mask & TI_PARAM_TX_COAL_TICKS) {
|
|
sc->ti_tx_coal_ticks = params->ti_tx_coal_ticks;
|
|
CSR_WRITE_4(sc, TI_GCR_TX_COAL_TICKS,
|
|
sc->ti_tx_coal_ticks);
|
|
}
|
|
|
|
if (params->param_mask & TI_PARAM_RX_COAL_BDS) {
|
|
sc->ti_rx_max_coal_bds = params->ti_rx_max_coal_bds;
|
|
CSR_WRITE_4(sc, TI_GCR_RX_MAX_COAL_BD,
|
|
sc->ti_rx_max_coal_bds);
|
|
}
|
|
|
|
if (params->param_mask & TI_PARAM_TX_COAL_BDS) {
|
|
sc->ti_tx_max_coal_bds = params->ti_tx_max_coal_bds;
|
|
CSR_WRITE_4(sc, TI_GCR_TX_MAX_COAL_BD,
|
|
sc->ti_tx_max_coal_bds);
|
|
}
|
|
|
|
if (params->param_mask & TI_PARAM_TX_BUF_RATIO) {
|
|
sc->ti_tx_buf_ratio = params->ti_tx_buf_ratio;
|
|
CSR_WRITE_4(sc, TI_GCR_TX_BUFFER_RATIO,
|
|
sc->ti_tx_buf_ratio);
|
|
}
|
|
TI_UNLOCK(sc);
|
|
break;
|
|
}
|
|
case TIIOCSETTRACE: {
|
|
ti_trace_type trace_type;
|
|
|
|
trace_type = *(ti_trace_type *)addr;
|
|
|
|
/*
|
|
* Set tracing to whatever the user asked for. Setting
|
|
* this register to 0 should have the effect of disabling
|
|
* tracing.
|
|
*/
|
|
TI_LOCK(sc);
|
|
CSR_WRITE_4(sc, TI_GCR_NIC_TRACING, trace_type);
|
|
TI_UNLOCK(sc);
|
|
break;
|
|
}
|
|
case TIIOCGETTRACE: {
|
|
struct ti_trace_buf *trace_buf;
|
|
uint32_t trace_start, cur_trace_ptr, trace_len;
|
|
|
|
trace_buf = (struct ti_trace_buf *)addr;
|
|
|
|
TI_LOCK(sc);
|
|
trace_start = CSR_READ_4(sc, TI_GCR_NICTRACE_START);
|
|
cur_trace_ptr = CSR_READ_4(sc, TI_GCR_NICTRACE_PTR);
|
|
trace_len = CSR_READ_4(sc, TI_GCR_NICTRACE_LEN);
|
|
#if 0
|
|
if_printf(sc->ti_ifp, "trace_start = %#x, cur_trace_ptr = %#x, "
|
|
"trace_len = %d\n", trace_start,
|
|
cur_trace_ptr, trace_len);
|
|
if_printf(sc->ti_ifp, "trace_buf->buf_len = %d\n",
|
|
trace_buf->buf_len);
|
|
#endif
|
|
error = ti_copy_mem(sc, trace_start, min(trace_len,
|
|
trace_buf->buf_len), (caddr_t)trace_buf->buf, 1, 1);
|
|
if (error == 0) {
|
|
trace_buf->fill_len = min(trace_len,
|
|
trace_buf->buf_len);
|
|
if (cur_trace_ptr < trace_start)
|
|
trace_buf->cur_trace_ptr =
|
|
trace_start - cur_trace_ptr;
|
|
else
|
|
trace_buf->cur_trace_ptr =
|
|
cur_trace_ptr - trace_start;
|
|
} else
|
|
trace_buf->fill_len = 0;
|
|
TI_UNLOCK(sc);
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* For debugging, five ioctls are needed:
|
|
* ALT_ATTACH
|
|
* ALT_READ_TG_REG
|
|
* ALT_WRITE_TG_REG
|
|
* ALT_READ_TG_MEM
|
|
* ALT_WRITE_TG_MEM
|
|
*/
|
|
case ALT_ATTACH:
|
|
/*
|
|
* From what I can tell, Alteon's Solaris Tigon driver
|
|
* only has one character device, so you have to attach
|
|
* to the Tigon board you're interested in. This seems
|
|
* like a not-so-good way to do things, since unless you
|
|
* subsequently specify the unit number of the device
|
|
* you're interested in every ioctl, you'll only be
|
|
* able to debug one board at a time.
|
|
*/
|
|
break;
|
|
case ALT_READ_TG_MEM:
|
|
case ALT_WRITE_TG_MEM:
|
|
{
|
|
struct tg_mem *mem_param;
|
|
uint32_t sram_end, scratch_end;
|
|
|
|
mem_param = (struct tg_mem *)addr;
|
|
|
|
if (sc->ti_hwrev == TI_HWREV_TIGON) {
|
|
sram_end = TI_END_SRAM_I;
|
|
scratch_end = TI_END_SCRATCH_I;
|
|
} else {
|
|
sram_end = TI_END_SRAM_II;
|
|
scratch_end = TI_END_SCRATCH_II;
|
|
}
|
|
|
|
/*
|
|
* For now, we'll only handle accessing regular SRAM,
|
|
* nothing else.
|
|
*/
|
|
TI_LOCK(sc);
|
|
if (mem_param->tgAddr >= TI_BEG_SRAM &&
|
|
mem_param->tgAddr + mem_param->len <= sram_end) {
|
|
/*
|
|
* In this instance, we always copy to/from user
|
|
* space, so the user space argument is set to 1.
|
|
*/
|
|
error = ti_copy_mem(sc, mem_param->tgAddr,
|
|
mem_param->len, mem_param->userAddr, 1,
|
|
cmd == ALT_READ_TG_MEM ? 1 : 0);
|
|
} else if (mem_param->tgAddr >= TI_BEG_SCRATCH &&
|
|
mem_param->tgAddr <= scratch_end) {
|
|
error = ti_copy_scratch(sc, mem_param->tgAddr,
|
|
mem_param->len, mem_param->userAddr, 1,
|
|
cmd == ALT_READ_TG_MEM ? 1 : 0, TI_PROCESSOR_A);
|
|
} else if (mem_param->tgAddr >= TI_BEG_SCRATCH_B_DEBUG &&
|
|
mem_param->tgAddr <= TI_BEG_SCRATCH_B_DEBUG) {
|
|
if (sc->ti_hwrev == TI_HWREV_TIGON) {
|
|
if_printf(sc->ti_ifp,
|
|
"invalid memory range for Tigon I\n");
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
error = ti_copy_scratch(sc, mem_param->tgAddr -
|
|
TI_SCRATCH_DEBUG_OFF, mem_param->len,
|
|
mem_param->userAddr, 1,
|
|
cmd == ALT_READ_TG_MEM ? 1 : 0, TI_PROCESSOR_B);
|
|
} else {
|
|
if_printf(sc->ti_ifp, "memory address %#x len %d is "
|
|
"out of supported range\n",
|
|
mem_param->tgAddr, mem_param->len);
|
|
error = EINVAL;
|
|
}
|
|
TI_UNLOCK(sc);
|
|
break;
|
|
}
|
|
case ALT_READ_TG_REG:
|
|
case ALT_WRITE_TG_REG:
|
|
{
|
|
struct tg_reg *regs;
|
|
uint32_t tmpval;
|
|
|
|
regs = (struct tg_reg *)addr;
|
|
|
|
/*
|
|
* Make sure the address in question isn't out of range.
|
|
*/
|
|
if (regs->addr > TI_REG_MAX) {
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
TI_LOCK(sc);
|
|
if (cmd == ALT_READ_TG_REG) {
|
|
bus_space_read_region_4(sc->ti_btag, sc->ti_bhandle,
|
|
regs->addr, &tmpval, 1);
|
|
regs->data = ntohl(tmpval);
|
|
#if 0
|
|
if ((regs->addr == TI_CPU_STATE)
|
|
|| (regs->addr == TI_CPU_CTL_B)) {
|
|
if_printf(sc->ti_ifp, "register %#x = %#x\n",
|
|
regs->addr, tmpval);
|
|
}
|
|
#endif
|
|
} else {
|
|
tmpval = htonl(regs->data);
|
|
bus_space_write_region_4(sc->ti_btag, sc->ti_bhandle,
|
|
regs->addr, &tmpval, 1);
|
|
}
|
|
TI_UNLOCK(sc);
|
|
break;
|
|
}
|
|
default:
|
|
error = ENOTTY;
|
|
break;
|
|
}
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
ti_watchdog(void *arg)
|
|
{
|
|
struct ti_softc *sc;
|
|
struct ifnet *ifp;
|
|
|
|
sc = arg;
|
|
TI_LOCK_ASSERT(sc);
|
|
callout_reset(&sc->ti_watchdog, hz, ti_watchdog, sc);
|
|
if (sc->ti_timer == 0 || --sc->ti_timer > 0)
|
|
return;
|
|
|
|
/*
|
|
* When we're debugging, the chip is often stopped for long periods
|
|
* of time, and that would normally cause the watchdog timer to fire.
|
|
* Since that impedes debugging, we don't want to do that.
|
|
*/
|
|
if (sc->ti_flags & TI_FLAG_DEBUGING)
|
|
return;
|
|
|
|
ifp = sc->ti_ifp;
|
|
if_printf(ifp, "watchdog timeout -- resetting\n");
|
|
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
ti_init_locked(sc);
|
|
|
|
if_inc_counter(ifp, IFCOUNTER_OERRORS, 1);
|
|
}
|
|
|
|
/*
|
|
* Stop the adapter and free any mbufs allocated to the
|
|
* RX and TX lists.
|
|
*/
|
|
static void
|
|
ti_stop(struct ti_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
struct ti_cmd_desc cmd;
|
|
|
|
TI_LOCK_ASSERT(sc);
|
|
|
|
ifp = sc->ti_ifp;
|
|
|
|
/* Disable host interrupts. */
|
|
CSR_WRITE_4(sc, TI_MB_HOSTINTR, 1);
|
|
/*
|
|
* Tell firmware we're shutting down.
|
|
*/
|
|
TI_DO_CMD(TI_CMD_HOST_STATE, TI_CMD_CODE_STACK_DOWN, 0);
|
|
|
|
/* Halt and reinitialize. */
|
|
if (ti_chipinit(sc) == 0) {
|
|
ti_mem_zero(sc, 0x2000, 0x100000 - 0x2000);
|
|
/* XXX ignore init errors. */
|
|
ti_chipinit(sc);
|
|
}
|
|
|
|
/* Free the RX lists. */
|
|
ti_free_rx_ring_std(sc);
|
|
|
|
/* Free jumbo RX list. */
|
|
ti_free_rx_ring_jumbo(sc);
|
|
|
|
/* Free mini RX list. */
|
|
ti_free_rx_ring_mini(sc);
|
|
|
|
/* Free TX buffers. */
|
|
ti_free_tx_ring(sc);
|
|
|
|
sc->ti_ev_prodidx.ti_idx = 0;
|
|
sc->ti_return_prodidx.ti_idx = 0;
|
|
sc->ti_tx_considx.ti_idx = 0;
|
|
sc->ti_tx_saved_considx = TI_TXCONS_UNSET;
|
|
|
|
ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
|
|
callout_stop(&sc->ti_watchdog);
|
|
}
|
|
|
|
/*
|
|
* Stop all chip I/O so that the kernel's probe routines don't
|
|
* get confused by errant DMAs when rebooting.
|
|
*/
|
|
static int
|
|
ti_shutdown(device_t dev)
|
|
{
|
|
struct ti_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
TI_LOCK(sc);
|
|
ti_chipinit(sc);
|
|
TI_UNLOCK(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
ti_sysctl_node(struct ti_softc *sc)
|
|
{
|
|
struct sysctl_ctx_list *ctx;
|
|
struct sysctl_oid_list *child;
|
|
char tname[32];
|
|
|
|
ctx = device_get_sysctl_ctx(sc->ti_dev);
|
|
child = SYSCTL_CHILDREN(device_get_sysctl_tree(sc->ti_dev));
|
|
|
|
/* Use DAC */
|
|
sc->ti_dac = 1;
|
|
snprintf(tname, sizeof(tname), "dev.ti.%d.dac",
|
|
device_get_unit(sc->ti_dev));
|
|
TUNABLE_INT_FETCH(tname, &sc->ti_dac);
|
|
|
|
SYSCTL_ADD_UINT(ctx, child, OID_AUTO, "rx_coal_ticks", CTLFLAG_RW,
|
|
&sc->ti_rx_coal_ticks, 0, "Receive coalcesced ticks");
|
|
SYSCTL_ADD_UINT(ctx, child, OID_AUTO, "rx_max_coal_bds", CTLFLAG_RW,
|
|
&sc->ti_rx_max_coal_bds, 0, "Receive max coalcesced BDs");
|
|
|
|
SYSCTL_ADD_UINT(ctx, child, OID_AUTO, "tx_coal_ticks", CTLFLAG_RW,
|
|
&sc->ti_tx_coal_ticks, 0, "Send coalcesced ticks");
|
|
SYSCTL_ADD_UINT(ctx, child, OID_AUTO, "tx_max_coal_bds", CTLFLAG_RW,
|
|
&sc->ti_tx_max_coal_bds, 0, "Send max coalcesced BDs");
|
|
SYSCTL_ADD_UINT(ctx, child, OID_AUTO, "tx_buf_ratio", CTLFLAG_RW,
|
|
&sc->ti_tx_buf_ratio, 0,
|
|
"Ratio of NIC memory devoted to TX buffer");
|
|
|
|
SYSCTL_ADD_UINT(ctx, child, OID_AUTO, "stat_ticks", CTLFLAG_RW,
|
|
&sc->ti_stat_ticks, 0,
|
|
"Number of clock ticks for statistics update interval");
|
|
|
|
/* Pull in device tunables. */
|
|
sc->ti_rx_coal_ticks = 170;
|
|
resource_int_value(device_get_name(sc->ti_dev),
|
|
device_get_unit(sc->ti_dev), "rx_coal_ticks",
|
|
&sc->ti_rx_coal_ticks);
|
|
sc->ti_rx_max_coal_bds = 64;
|
|
resource_int_value(device_get_name(sc->ti_dev),
|
|
device_get_unit(sc->ti_dev), "rx_max_coal_bds",
|
|
&sc->ti_rx_max_coal_bds);
|
|
|
|
sc->ti_tx_coal_ticks = TI_TICKS_PER_SEC / 500;
|
|
resource_int_value(device_get_name(sc->ti_dev),
|
|
device_get_unit(sc->ti_dev), "tx_coal_ticks",
|
|
&sc->ti_tx_coal_ticks);
|
|
sc->ti_tx_max_coal_bds = 32;
|
|
resource_int_value(device_get_name(sc->ti_dev),
|
|
device_get_unit(sc->ti_dev), "tx_max_coal_bds",
|
|
&sc->ti_tx_max_coal_bds);
|
|
sc->ti_tx_buf_ratio = 21;
|
|
resource_int_value(device_get_name(sc->ti_dev),
|
|
device_get_unit(sc->ti_dev), "tx_buf_ratio",
|
|
&sc->ti_tx_buf_ratio);
|
|
|
|
sc->ti_stat_ticks = 2 * TI_TICKS_PER_SEC;
|
|
resource_int_value(device_get_name(sc->ti_dev),
|
|
device_get_unit(sc->ti_dev), "stat_ticks",
|
|
&sc->ti_stat_ticks);
|
|
}
|