freebsd-skq/sys/dev/ex/if_ex.c
pfg 1537078d8f sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 14:52:40 +00:00

1084 lines
27 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 1996, Javier Martín Rueda (jmrueda@diatel.upm.es)
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*
* MAINTAINER: Matthew N. Dodd <winter@jurai.net>
* <mdodd@FreeBSD.org>
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* Intel EtherExpress Pro/10, Pro/10+ Ethernet driver
*
* Revision history:
*
* dd-mmm-yyyy: Multicast support ported from NetBSD's if_iy driver.
* 30-Oct-1996: first beta version. Inet and BPF supported, but no multicast.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/sockio.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <net/if.h>
#include <net/if_var.h>
#include <net/if_arp.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_types.h>
#include <net/ethernet.h>
#include <net/bpf.h>
#include <netinet/in.h>
#include <netinet/if_ether.h>
#include <isa/isavar.h>
#include <isa/pnpvar.h>
#include <dev/ex/if_exreg.h>
#include <dev/ex/if_exvar.h>
#ifdef EXDEBUG
# define Start_End 1
# define Rcvd_Pkts 2
# define Sent_Pkts 4
# define Status 8
static int debug_mask = 0;
# define DODEBUG(level, action) if (level & debug_mask) action
#else
# define DODEBUG(level, action)
#endif
devclass_t ex_devclass;
char irq2eemap[] =
{ -1, -1, 0, 1, -1, 2, -1, -1, -1, 0, 3, 4, -1, -1, -1, -1 };
u_char ee2irqmap[] =
{ 9, 3, 5, 10, 11, 0, 0, 0 };
char plus_irq2eemap[] =
{ -1, -1, -1, 0, 1, 2, -1, 3, -1, 4, 5, 6, 7, -1, -1, -1 };
u_char plus_ee2irqmap[] =
{ 3, 4, 5, 7, 9, 10, 11, 12 };
/* Network Interface Functions */
static void ex_init(void *);
static void ex_init_locked(struct ex_softc *);
static void ex_start(struct ifnet *);
static void ex_start_locked(struct ifnet *);
static int ex_ioctl(struct ifnet *, u_long, caddr_t);
static void ex_watchdog(void *);
/* ifmedia Functions */
static int ex_ifmedia_upd(struct ifnet *);
static void ex_ifmedia_sts(struct ifnet *, struct ifmediareq *);
static int ex_get_media(struct ex_softc *);
static void ex_reset(struct ex_softc *);
static void ex_setmulti(struct ex_softc *);
static void ex_tx_intr(struct ex_softc *);
static void ex_rx_intr(struct ex_softc *);
void
ex_get_address(struct ex_softc *sc, u_char *enaddr)
{
uint16_t eaddr_tmp;
eaddr_tmp = ex_eeprom_read(sc, EE_Eth_Addr_Lo);
enaddr[5] = eaddr_tmp & 0xff;
enaddr[4] = eaddr_tmp >> 8;
eaddr_tmp = ex_eeprom_read(sc, EE_Eth_Addr_Mid);
enaddr[3] = eaddr_tmp & 0xff;
enaddr[2] = eaddr_tmp >> 8;
eaddr_tmp = ex_eeprom_read(sc, EE_Eth_Addr_Hi);
enaddr[1] = eaddr_tmp & 0xff;
enaddr[0] = eaddr_tmp >> 8;
return;
}
int
ex_card_type(u_char *enaddr)
{
if ((enaddr[0] == 0x00) && (enaddr[1] == 0xA0) && (enaddr[2] == 0xC9))
return (CARD_TYPE_EX_10_PLUS);
return (CARD_TYPE_EX_10);
}
/*
* Caller is responsible for eventually calling
* ex_release_resources() on failure.
*/
int
ex_alloc_resources(device_t dev)
{
struct ex_softc * sc = device_get_softc(dev);
int error = 0;
sc->ioport = bus_alloc_resource_any(dev, SYS_RES_IOPORT,
&sc->ioport_rid, RF_ACTIVE);
if (!sc->ioport) {
device_printf(dev, "No I/O space?!\n");
error = ENOMEM;
goto bad;
}
sc->irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &sc->irq_rid,
RF_ACTIVE);
if (!sc->irq) {
device_printf(dev, "No IRQ?!\n");
error = ENOMEM;
goto bad;
}
bad:
return (error);
}
void
ex_release_resources(device_t dev)
{
struct ex_softc * sc = device_get_softc(dev);
if (sc->ih) {
bus_teardown_intr(dev, sc->irq, sc->ih);
sc->ih = NULL;
}
if (sc->ioport) {
bus_release_resource(dev, SYS_RES_IOPORT,
sc->ioport_rid, sc->ioport);
sc->ioport = NULL;
}
if (sc->irq) {
bus_release_resource(dev, SYS_RES_IRQ,
sc->irq_rid, sc->irq);
sc->irq = NULL;
}
if (sc->ifp)
if_free(sc->ifp);
return;
}
int
ex_attach(device_t dev)
{
struct ex_softc * sc = device_get_softc(dev);
struct ifnet * ifp;
struct ifmedia * ifm;
int error;
uint16_t temp;
ifp = sc->ifp = if_alloc(IFT_ETHER);
if (ifp == NULL) {
device_printf(dev, "can not if_alloc()\n");
return (ENOSPC);
}
/* work out which set of irq <-> internal tables to use */
if (ex_card_type(sc->enaddr) == CARD_TYPE_EX_10_PLUS) {
sc->irq2ee = plus_irq2eemap;
sc->ee2irq = plus_ee2irqmap;
} else {
sc->irq2ee = irq2eemap;
sc->ee2irq = ee2irqmap;
}
sc->mem_size = CARD_RAM_SIZE; /* XXX This should be read from the card itself. */
/*
* Initialize the ifnet structure.
*/
ifp->if_softc = sc;
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
ifp->if_flags = IFF_SIMPLEX | IFF_BROADCAST | IFF_MULTICAST;
ifp->if_start = ex_start;
ifp->if_ioctl = ex_ioctl;
ifp->if_init = ex_init;
IFQ_SET_MAXLEN(&ifp->if_snd, ifqmaxlen);
ifmedia_init(&sc->ifmedia, 0, ex_ifmedia_upd, ex_ifmedia_sts);
mtx_init(&sc->lock, device_get_nameunit(dev), MTX_NETWORK_LOCK,
MTX_DEF);
callout_init_mtx(&sc->timer, &sc->lock, 0);
temp = ex_eeprom_read(sc, EE_W5);
if (temp & EE_W5_PORT_TPE)
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T, 0, NULL);
if (temp & EE_W5_PORT_BNC)
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_2, 0, NULL);
if (temp & EE_W5_PORT_AUI)
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_5, 0, NULL);
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_AUTO, 0, NULL);
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_NONE, 0, NULL);
ifmedia_set(&sc->ifmedia, ex_get_media(sc));
ifm = &sc->ifmedia;
ifm->ifm_media = ifm->ifm_cur->ifm_media;
ex_ifmedia_upd(ifp);
/*
* Attach the interface.
*/
ether_ifattach(ifp, sc->enaddr);
error = bus_setup_intr(dev, sc->irq, INTR_TYPE_NET | INTR_MPSAFE,
NULL, ex_intr, (void *)sc, &sc->ih);
if (error) {
device_printf(dev, "bus_setup_intr() failed!\n");
ether_ifdetach(ifp);
mtx_destroy(&sc->lock);
return (error);
}
return(0);
}
int
ex_detach(device_t dev)
{
struct ex_softc *sc;
struct ifnet *ifp;
sc = device_get_softc(dev);
ifp = sc->ifp;
EX_LOCK(sc);
ex_stop(sc);
EX_UNLOCK(sc);
ether_ifdetach(ifp);
callout_drain(&sc->timer);
ex_release_resources(dev);
mtx_destroy(&sc->lock);
return (0);
}
static void
ex_init(void *xsc)
{
struct ex_softc * sc = (struct ex_softc *) xsc;
EX_LOCK(sc);
ex_init_locked(sc);
EX_UNLOCK(sc);
}
static void
ex_init_locked(struct ex_softc *sc)
{
struct ifnet * ifp = sc->ifp;
int i;
unsigned short temp_reg;
DODEBUG(Start_End, printf("%s: ex_init: start\n", ifp->if_xname););
sc->tx_timeout = 0;
/*
* Load the ethernet address into the card.
*/
CSR_WRITE_1(sc, CMD_REG, Bank2_Sel);
temp_reg = CSR_READ_1(sc, EEPROM_REG);
if (temp_reg & Trnoff_Enable)
CSR_WRITE_1(sc, EEPROM_REG, temp_reg & ~Trnoff_Enable);
for (i = 0; i < ETHER_ADDR_LEN; i++)
CSR_WRITE_1(sc, I_ADDR_REG0 + i, IF_LLADDR(sc->ifp)[i]);
/*
* - Setup transmit chaining and discard bad received frames.
* - Match broadcast.
* - Clear test mode.
* - Set receiving mode.
*/
CSR_WRITE_1(sc, REG1, CSR_READ_1(sc, REG1) | Tx_Chn_Int_Md | Tx_Chn_ErStp | Disc_Bad_Fr);
CSR_WRITE_1(sc, REG2, CSR_READ_1(sc, REG2) | No_SA_Ins | RX_CRC_InMem);
CSR_WRITE_1(sc, REG3, CSR_READ_1(sc, REG3) & 0x3f /* XXX constants. */ );
/*
* - Set IRQ number, if this part has it. ISA devices have this,
* while PC Card devices don't seem to. Either way, we have to
* switch to Bank1 as the rest of this code relies on that.
*/
CSR_WRITE_1(sc, CMD_REG, Bank1_Sel);
if (sc->flags & HAS_INT_NO_REG)
CSR_WRITE_1(sc, INT_NO_REG,
(CSR_READ_1(sc, INT_NO_REG) & 0xf8) |
sc->irq2ee[sc->irq_no]);
/*
* Divide the available memory in the card into rcv and xmt buffers.
* By default, I use the first 3/4 of the memory for the rcv buffer,
* and the remaining 1/4 of the memory for the xmt buffer.
*/
sc->rx_mem_size = sc->mem_size * 3 / 4;
sc->tx_mem_size = sc->mem_size - sc->rx_mem_size;
sc->rx_lower_limit = 0x0000;
sc->rx_upper_limit = sc->rx_mem_size - 2;
sc->tx_lower_limit = sc->rx_mem_size;
sc->tx_upper_limit = sc->mem_size - 2;
CSR_WRITE_1(sc, RCV_LOWER_LIMIT_REG, sc->rx_lower_limit >> 8);
CSR_WRITE_1(sc, RCV_UPPER_LIMIT_REG, sc->rx_upper_limit >> 8);
CSR_WRITE_1(sc, XMT_LOWER_LIMIT_REG, sc->tx_lower_limit >> 8);
CSR_WRITE_1(sc, XMT_UPPER_LIMIT_REG, sc->tx_upper_limit >> 8);
/*
* Enable receive and transmit interrupts, and clear any pending int.
*/
CSR_WRITE_1(sc, REG1, CSR_READ_1(sc, REG1) | TriST_INT);
CSR_WRITE_1(sc, CMD_REG, Bank0_Sel);
CSR_WRITE_1(sc, MASK_REG, All_Int & ~(Rx_Int | Tx_Int));
CSR_WRITE_1(sc, STATUS_REG, All_Int);
/*
* Initialize receive and transmit ring buffers.
*/
CSR_WRITE_2(sc, RCV_BAR, sc->rx_lower_limit);
sc->rx_head = sc->rx_lower_limit;
CSR_WRITE_2(sc, RCV_STOP_REG, sc->rx_upper_limit | 0xfe);
CSR_WRITE_2(sc, XMT_BAR, sc->tx_lower_limit);
sc->tx_head = sc->tx_tail = sc->tx_lower_limit;
ifp->if_drv_flags |= IFF_DRV_RUNNING;
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
DODEBUG(Status, printf("OIDLE init\n"););
callout_reset(&sc->timer, hz, ex_watchdog, sc);
ex_setmulti(sc);
/*
* Final reset of the board, and enable operation.
*/
CSR_WRITE_1(sc, CMD_REG, Sel_Reset_CMD);
DELAY(2);
CSR_WRITE_1(sc, CMD_REG, Rcv_Enable_CMD);
ex_start_locked(ifp);
DODEBUG(Start_End, printf("%s: ex_init: finish\n", ifp->if_xname););
}
static void
ex_start(struct ifnet *ifp)
{
struct ex_softc * sc = ifp->if_softc;
EX_LOCK(sc);
ex_start_locked(ifp);
EX_UNLOCK(sc);
}
static void
ex_start_locked(struct ifnet *ifp)
{
struct ex_softc * sc = ifp->if_softc;
int i, len, data_len, avail, dest, next;
unsigned char tmp16[2];
struct mbuf * opkt;
struct mbuf * m;
DODEBUG(Start_End, printf("ex_start%d: start\n", unit););
/*
* Main loop: send outgoing packets to network card until there are no
* more packets left, or the card cannot accept any more yet.
*/
while (((opkt = ifp->if_snd.ifq_head) != NULL) &&
!(ifp->if_drv_flags & IFF_DRV_OACTIVE)) {
/*
* Ensure there is enough free transmit buffer space for
* this packet, including its header. Note: the header
* cannot wrap around the end of the transmit buffer and
* must be kept together, so we allow space for twice the
* length of the header, just in case.
*/
for (len = 0, m = opkt; m != NULL; m = m->m_next) {
len += m->m_len;
}
data_len = len;
DODEBUG(Sent_Pkts, printf("1. Sending packet with %d data bytes. ", data_len););
if (len & 1) {
len += XMT_HEADER_LEN + 1;
} else {
len += XMT_HEADER_LEN;
}
if ((i = sc->tx_tail - sc->tx_head) >= 0) {
avail = sc->tx_mem_size - i;
} else {
avail = -i;
}
DODEBUG(Sent_Pkts, printf("i=%d, avail=%d\n", i, avail););
if (avail >= len + XMT_HEADER_LEN) {
IF_DEQUEUE(&ifp->if_snd, opkt);
#ifdef EX_PSA_INTR
/*
* Disable rx and tx interrupts, to avoid corruption
* of the host address register by interrupt service
* routines.
* XXX Is this necessary with splimp() enabled?
*/
CSR_WRITE_1(sc, MASK_REG, All_Int);
#endif
/*
* Compute the start and end addresses of this
* frame in the tx buffer.
*/
dest = sc->tx_tail;
next = dest + len;
if (next > sc->tx_upper_limit) {
if ((sc->tx_upper_limit + 2 - sc->tx_tail) <=
XMT_HEADER_LEN) {
dest = sc->tx_lower_limit;
next = dest + len;
} else {
next = sc->tx_lower_limit +
next - sc->tx_upper_limit - 2;
}
}
/*
* Build the packet frame in the card's ring buffer.
*/
DODEBUG(Sent_Pkts, printf("2. dest=%d, next=%d. ", dest, next););
CSR_WRITE_2(sc, HOST_ADDR_REG, dest);
CSR_WRITE_2(sc, IO_PORT_REG, Transmit_CMD);
CSR_WRITE_2(sc, IO_PORT_REG, 0);
CSR_WRITE_2(sc, IO_PORT_REG, next);
CSR_WRITE_2(sc, IO_PORT_REG, data_len);
/*
* Output the packet data to the card. Ensure all
* transfers are 16-bit wide, even if individual
* mbufs have odd length.
*/
for (m = opkt, i = 0; m != NULL; m = m->m_next) {
DODEBUG(Sent_Pkts, printf("[%d]", m->m_len););
if (i) {
tmp16[1] = *(mtod(m, caddr_t));
CSR_WRITE_MULTI_2(sc, IO_PORT_REG,
(uint16_t *) tmp16, 1);
}
CSR_WRITE_MULTI_2(sc, IO_PORT_REG,
(uint16_t *) (mtod(m, caddr_t) + i),
(m->m_len - i) / 2);
if ((i = (m->m_len - i) & 1) != 0) {
tmp16[0] = *(mtod(m, caddr_t) +
m->m_len - 1);
}
}
if (i)
CSR_WRITE_MULTI_2(sc, IO_PORT_REG,
(uint16_t *) tmp16, 1);
/*
* If there were other frames chained, update the
* chain in the last one.
*/
if (sc->tx_head != sc->tx_tail) {
if (sc->tx_tail != dest) {
CSR_WRITE_2(sc, HOST_ADDR_REG,
sc->tx_last + XMT_Chain_Point);
CSR_WRITE_2(sc, IO_PORT_REG, dest);
}
CSR_WRITE_2(sc, HOST_ADDR_REG,
sc->tx_last + XMT_Byte_Count);
i = CSR_READ_2(sc, IO_PORT_REG);
CSR_WRITE_2(sc, HOST_ADDR_REG,
sc->tx_last + XMT_Byte_Count);
CSR_WRITE_2(sc, IO_PORT_REG, i | Ch_bit);
}
/*
* Resume normal operation of the card:
* - Make a dummy read to flush the DRAM write
* pipeline.
* - Enable receive and transmit interrupts.
* - Send Transmit or Resume_XMT command, as
* appropriate.
*/
CSR_READ_2(sc, IO_PORT_REG);
#ifdef EX_PSA_INTR
CSR_WRITE_1(sc, MASK_REG, All_Int & ~(Rx_Int | Tx_Int));
#endif
if (sc->tx_head == sc->tx_tail) {
CSR_WRITE_2(sc, XMT_BAR, dest);
CSR_WRITE_1(sc, CMD_REG, Transmit_CMD);
sc->tx_head = dest;
DODEBUG(Sent_Pkts, printf("Transmit\n"););
} else {
CSR_WRITE_1(sc, CMD_REG, Resume_XMT_List_CMD);
DODEBUG(Sent_Pkts, printf("Resume\n"););
}
sc->tx_last = dest;
sc->tx_tail = next;
BPF_MTAP(ifp, opkt);
sc->tx_timeout = 2;
if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1);
m_freem(opkt);
} else {
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
DODEBUG(Status, printf("OACTIVE start\n"););
}
}
DODEBUG(Start_End, printf("ex_start%d: finish\n", unit););
}
void
ex_stop(struct ex_softc *sc)
{
DODEBUG(Start_End, printf("ex_stop%d: start\n", unit););
EX_ASSERT_LOCKED(sc);
/*
* Disable card operation:
* - Disable the interrupt line.
* - Flush transmission and disable reception.
* - Mask and clear all interrupts.
* - Reset the 82595.
*/
CSR_WRITE_1(sc, CMD_REG, Bank1_Sel);
CSR_WRITE_1(sc, REG1, CSR_READ_1(sc, REG1) & ~TriST_INT);
CSR_WRITE_1(sc, CMD_REG, Bank0_Sel);
CSR_WRITE_1(sc, CMD_REG, Rcv_Stop);
sc->tx_head = sc->tx_tail = sc->tx_lower_limit;
sc->tx_last = 0; /* XXX I think these two lines are not necessary, because ex_init will always be called again to reinit the interface. */
CSR_WRITE_1(sc, MASK_REG, All_Int);
CSR_WRITE_1(sc, STATUS_REG, All_Int);
CSR_WRITE_1(sc, CMD_REG, Reset_CMD);
DELAY(200);
sc->ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
sc->tx_timeout = 0;
callout_stop(&sc->timer);
DODEBUG(Start_End, printf("ex_stop%d: finish\n", unit););
return;
}
void
ex_intr(void *arg)
{
struct ex_softc *sc = (struct ex_softc *)arg;
struct ifnet *ifp = sc->ifp;
int int_status, send_pkts;
int loops = 100;
DODEBUG(Start_End, printf("ex_intr%d: start\n", unit););
EX_LOCK(sc);
send_pkts = 0;
while (loops-- > 0 &&
(int_status = CSR_READ_1(sc, STATUS_REG)) & (Tx_Int | Rx_Int)) {
/* don't loop forever */
if (int_status == 0xff)
break;
if (int_status & Rx_Int) {
CSR_WRITE_1(sc, STATUS_REG, Rx_Int);
ex_rx_intr(sc);
} else if (int_status & Tx_Int) {
CSR_WRITE_1(sc, STATUS_REG, Tx_Int);
ex_tx_intr(sc);
send_pkts = 1;
}
}
if (loops == 0)
printf("100 loops are not enough\n");
/*
* If any packet has been transmitted, and there are queued packets to
* be sent, attempt to send more packets to the network card.
*/
if (send_pkts && (ifp->if_snd.ifq_head != NULL))
ex_start_locked(ifp);
EX_UNLOCK(sc);
DODEBUG(Start_End, printf("ex_intr%d: finish\n", unit););
return;
}
static void
ex_tx_intr(struct ex_softc *sc)
{
struct ifnet * ifp = sc->ifp;
int tx_status;
DODEBUG(Start_End, printf("ex_tx_intr%d: start\n", unit););
/*
* - Cancel the watchdog.
* For all packets transmitted since last transmit interrupt:
* - Advance chain pointer to next queued packet.
* - Update statistics.
*/
sc->tx_timeout = 0;
while (sc->tx_head != sc->tx_tail) {
CSR_WRITE_2(sc, HOST_ADDR_REG, sc->tx_head);
if (!(CSR_READ_2(sc, IO_PORT_REG) & Done_bit))
break;
tx_status = CSR_READ_2(sc, IO_PORT_REG);
sc->tx_head = CSR_READ_2(sc, IO_PORT_REG);
if (tx_status & TX_OK_bit) {
if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1);
} else {
if_inc_counter(ifp, IFCOUNTER_OERRORS, 1);
}
if_inc_counter(ifp, IFCOUNTER_COLLISIONS, tx_status & No_Collisions_bits);
}
/*
* The card should be ready to accept more packets now.
*/
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
DODEBUG(Status, printf("OIDLE tx_intr\n"););
DODEBUG(Start_End, printf("ex_tx_intr%d: finish\n", unit););
return;
}
static void
ex_rx_intr(struct ex_softc *sc)
{
struct ifnet * ifp = sc->ifp;
int rx_status;
int pkt_len;
int QQQ;
struct mbuf * m;
struct mbuf * ipkt;
struct ether_header * eh;
DODEBUG(Start_End, printf("ex_rx_intr%d: start\n", unit););
/*
* For all packets received since last receive interrupt:
* - If packet ok, read it into a new mbuf and queue it to interface,
* updating statistics.
* - If packet bad, just discard it, and update statistics.
* Finally, advance receive stop limit in card's memory to new location.
*/
CSR_WRITE_2(sc, HOST_ADDR_REG, sc->rx_head);
while (CSR_READ_2(sc, IO_PORT_REG) == RCV_Done) {
rx_status = CSR_READ_2(sc, IO_PORT_REG);
sc->rx_head = CSR_READ_2(sc, IO_PORT_REG);
QQQ = pkt_len = CSR_READ_2(sc, IO_PORT_REG);
if (rx_status & RCV_OK_bit) {
MGETHDR(m, M_NOWAIT, MT_DATA);
ipkt = m;
if (ipkt == NULL) {
if_inc_counter(ifp, IFCOUNTER_IQDROPS, 1);
} else {
ipkt->m_pkthdr.rcvif = ifp;
ipkt->m_pkthdr.len = pkt_len;
ipkt->m_len = MHLEN;
while (pkt_len > 0) {
if (pkt_len >= MINCLSIZE) {
if (MCLGET(m, M_NOWAIT)) {
m->m_len = MCLBYTES;
} else {
m_freem(ipkt);
if_inc_counter(ifp, IFCOUNTER_IQDROPS, 1);
goto rx_another;
}
}
m->m_len = min(m->m_len, pkt_len);
/*
* NOTE: I'm assuming that all mbufs allocated are of even length,
* except for the last one in an odd-length packet.
*/
CSR_READ_MULTI_2(sc, IO_PORT_REG,
mtod(m, uint16_t *), m->m_len / 2);
if (m->m_len & 1) {
*(mtod(m, caddr_t) + m->m_len - 1) = CSR_READ_1(sc, IO_PORT_REG);
}
pkt_len -= m->m_len;
if (pkt_len > 0) {
MGET(m->m_next, M_NOWAIT, MT_DATA);
if (m->m_next == NULL) {
m_freem(ipkt);
if_inc_counter(ifp, IFCOUNTER_IQDROPS, 1);
goto rx_another;
}
m = m->m_next;
m->m_len = MLEN;
}
}
eh = mtod(ipkt, struct ether_header *);
#ifdef EXDEBUG
if (debug_mask & Rcvd_Pkts) {
if ((eh->ether_dhost[5] != 0xff) || (eh->ether_dhost[0] != 0xff)) {
printf("Receive packet with %d data bytes: %6D -> ", QQQ, eh->ether_shost, ":");
printf("%6D\n", eh->ether_dhost, ":");
} /* QQQ */
}
#endif
EX_UNLOCK(sc);
(*ifp->if_input)(ifp, ipkt);
EX_LOCK(sc);
if_inc_counter(ifp, IFCOUNTER_IPACKETS, 1);
}
} else {
if_inc_counter(ifp, IFCOUNTER_IERRORS, 1);
}
CSR_WRITE_2(sc, HOST_ADDR_REG, sc->rx_head);
rx_another: ;
}
if (sc->rx_head < sc->rx_lower_limit + 2)
CSR_WRITE_2(sc, RCV_STOP_REG, sc->rx_upper_limit);
else
CSR_WRITE_2(sc, RCV_STOP_REG, sc->rx_head - 2);
DODEBUG(Start_End, printf("ex_rx_intr%d: finish\n", unit););
return;
}
static int
ex_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
{
struct ex_softc * sc = ifp->if_softc;
struct ifreq * ifr = (struct ifreq *)data;
int error = 0;
DODEBUG(Start_End, printf("%s: ex_ioctl: start ", ifp->if_xname););
switch(cmd) {
case SIOCSIFADDR:
case SIOCGIFADDR:
case SIOCSIFMTU:
error = ether_ioctl(ifp, cmd, data);
break;
case SIOCSIFFLAGS:
DODEBUG(Start_End, printf("SIOCSIFFLAGS"););
EX_LOCK(sc);
if ((ifp->if_flags & IFF_UP) == 0 &&
(ifp->if_drv_flags & IFF_DRV_RUNNING)) {
ex_stop(sc);
} else {
ex_init_locked(sc);
}
EX_UNLOCK(sc);
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
ex_init(sc);
error = 0;
break;
case SIOCSIFMEDIA:
case SIOCGIFMEDIA:
error = ifmedia_ioctl(ifp, ifr, &sc->ifmedia, cmd);
break;
default:
DODEBUG(Start_End, printf("unknown"););
error = EINVAL;
}
DODEBUG(Start_End, printf("\n%s: ex_ioctl: finish\n", ifp->if_xname););
return(error);
}
static void
ex_setmulti(struct ex_softc *sc)
{
struct ifnet *ifp;
struct ifmultiaddr *maddr;
uint16_t *addr;
int count;
int timeout, status;
ifp = sc->ifp;
count = 0;
if_maddr_rlock(ifp);
TAILQ_FOREACH(maddr, &ifp->if_multiaddrs, ifma_link) {
if (maddr->ifma_addr->sa_family != AF_LINK)
continue;
count++;
}
if_maddr_runlock(ifp);
if ((ifp->if_flags & IFF_PROMISC) || (ifp->if_flags & IFF_ALLMULTI)
|| count > 63) {
/* Interface is in promiscuous mode or there are too many
* multicast addresses for the card to handle */
CSR_WRITE_1(sc, CMD_REG, Bank2_Sel);
CSR_WRITE_1(sc, REG2, CSR_READ_1(sc, REG2) | Promisc_Mode);
CSR_WRITE_1(sc, REG3, CSR_READ_1(sc, REG3));
CSR_WRITE_1(sc, CMD_REG, Bank0_Sel);
}
else if ((ifp->if_flags & IFF_MULTICAST) && (count > 0)) {
/* Program multicast addresses plus our MAC address
* into the filter */
CSR_WRITE_1(sc, CMD_REG, Bank2_Sel);
CSR_WRITE_1(sc, REG2, CSR_READ_1(sc, REG2) | Multi_IA);
CSR_WRITE_1(sc, REG3, CSR_READ_1(sc, REG3));
CSR_WRITE_1(sc, CMD_REG, Bank0_Sel);
/* Borrow space from TX buffer; this should be safe
* as this is only called from ex_init */
CSR_WRITE_2(sc, HOST_ADDR_REG, sc->tx_lower_limit);
CSR_WRITE_2(sc, IO_PORT_REG, MC_Setup_CMD);
CSR_WRITE_2(sc, IO_PORT_REG, 0);
CSR_WRITE_2(sc, IO_PORT_REG, 0);
CSR_WRITE_2(sc, IO_PORT_REG, (count + 1) * 6);
if_maddr_rlock(ifp);
TAILQ_FOREACH(maddr, &ifp->if_multiaddrs, ifma_link) {
if (maddr->ifma_addr->sa_family != AF_LINK)
continue;
addr = (uint16_t*)LLADDR((struct sockaddr_dl *)
maddr->ifma_addr);
CSR_WRITE_2(sc, IO_PORT_REG, *addr++);
CSR_WRITE_2(sc, IO_PORT_REG, *addr++);
CSR_WRITE_2(sc, IO_PORT_REG, *addr++);
}
if_maddr_runlock(ifp);
/* Program our MAC address as well */
/* XXX: Is this necessary? The Linux driver does this
* but the NetBSD driver does not */
addr = (uint16_t*)IF_LLADDR(sc->ifp);
CSR_WRITE_2(sc, IO_PORT_REG, *addr++);
CSR_WRITE_2(sc, IO_PORT_REG, *addr++);
CSR_WRITE_2(sc, IO_PORT_REG, *addr++);
CSR_READ_2(sc, IO_PORT_REG);
CSR_WRITE_2(sc, XMT_BAR, sc->tx_lower_limit);
CSR_WRITE_1(sc, CMD_REG, MC_Setup_CMD);
sc->tx_head = sc->tx_lower_limit;
sc->tx_tail = sc->tx_head + XMT_HEADER_LEN + (count + 1) * 6;
for (timeout=0; timeout<100; timeout++) {
DELAY(2);
if ((CSR_READ_1(sc, STATUS_REG) & Exec_Int) == 0)
continue;
status = CSR_READ_1(sc, CMD_REG);
CSR_WRITE_1(sc, STATUS_REG, Exec_Int);
break;
}
sc->tx_head = sc->tx_tail;
}
else
{
/* No multicast or promiscuous mode */
CSR_WRITE_1(sc, CMD_REG, Bank2_Sel);
CSR_WRITE_1(sc, REG2, CSR_READ_1(sc, REG2) & 0xDE);
/* ~(Multi_IA | Promisc_Mode) */
CSR_WRITE_1(sc, REG3, CSR_READ_1(sc, REG3));
CSR_WRITE_1(sc, CMD_REG, Bank0_Sel);
}
}
static void
ex_reset(struct ex_softc *sc)
{
DODEBUG(Start_End, printf("ex_reset%d: start\n", unit););
EX_ASSERT_LOCKED(sc);
ex_stop(sc);
ex_init_locked(sc);
DODEBUG(Start_End, printf("ex_reset%d: finish\n", unit););
return;
}
static void
ex_watchdog(void *arg)
{
struct ex_softc * sc = arg;
struct ifnet *ifp = sc->ifp;
if (sc->tx_timeout && --sc->tx_timeout == 0) {
DODEBUG(Start_End, if_printf(ifp, "ex_watchdog: start\n"););
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
DODEBUG(Status, printf("OIDLE watchdog\n"););
if_inc_counter(ifp, IFCOUNTER_OERRORS, 1);
ex_reset(sc);
ex_start_locked(ifp);
DODEBUG(Start_End, if_printf(ifp, "ex_watchdog: finish\n"););
}
callout_reset(&sc->timer, hz, ex_watchdog, sc);
}
static int
ex_get_media(struct ex_softc *sc)
{
int current;
int media;
media = ex_eeprom_read(sc, EE_W5);
CSR_WRITE_1(sc, CMD_REG, Bank2_Sel);
current = CSR_READ_1(sc, REG3);
CSR_WRITE_1(sc, CMD_REG, Bank0_Sel);
if ((current & TPE_bit) && (media & EE_W5_PORT_TPE))
return(IFM_ETHER|IFM_10_T);
if ((current & BNC_bit) && (media & EE_W5_PORT_BNC))
return(IFM_ETHER|IFM_10_2);
if (media & EE_W5_PORT_AUI)
return (IFM_ETHER|IFM_10_5);
return (IFM_ETHER|IFM_AUTO);
}
static int
ex_ifmedia_upd(ifp)
struct ifnet * ifp;
{
struct ex_softc * sc = ifp->if_softc;
if (IFM_TYPE(sc->ifmedia.ifm_media) != IFM_ETHER)
return EINVAL;
return (0);
}
static void
ex_ifmedia_sts(ifp, ifmr)
struct ifnet * ifp;
struct ifmediareq * ifmr;
{
struct ex_softc * sc = ifp->if_softc;
EX_LOCK(sc);
ifmr->ifm_active = ex_get_media(sc);
ifmr->ifm_status = IFM_AVALID | IFM_ACTIVE;
EX_UNLOCK(sc);
return;
}
u_short
ex_eeprom_read(struct ex_softc *sc, int location)
{
int i;
u_short data = 0;
int read_cmd = location | EE_READ_CMD;
short ctrl_val = EECS;
CSR_WRITE_1(sc, CMD_REG, Bank2_Sel);
CSR_WRITE_1(sc, EEPROM_REG, EECS);
for (i = 8; i >= 0; i--) {
short outval = (read_cmd & (1 << i)) ? ctrl_val | EEDI : ctrl_val;
CSR_WRITE_1(sc, EEPROM_REG, outval);
CSR_WRITE_1(sc, EEPROM_REG, outval | EESK);
DELAY(3);
CSR_WRITE_1(sc, EEPROM_REG, outval);
DELAY(2);
}
CSR_WRITE_1(sc, EEPROM_REG, ctrl_val);
for (i = 16; i > 0; i--) {
CSR_WRITE_1(sc, EEPROM_REG, ctrl_val | EESK);
DELAY(3);
data = (data << 1) |
((CSR_READ_1(sc, EEPROM_REG) & EEDO) ? 1 : 0);
CSR_WRITE_1(sc, EEPROM_REG, ctrl_val);
DELAY(2);
}
ctrl_val &= ~EECS;
CSR_WRITE_1(sc, EEPROM_REG, ctrl_val | EESK);
DELAY(3);
CSR_WRITE_1(sc, EEPROM_REG, ctrl_val);
DELAY(2);
CSR_WRITE_1(sc, CMD_REG, Bank0_Sel);
return(data);
}