a3d97e12a0
psm(4), ukbd(4), ums(4) and usb(4) on by default. Modulo some nits with the most annoying one probably being USB keyboards no longer working at the OFW boot prompt after halting FreeBSD these drivers work fine on sparc64 including X and there's nothing left that I'd consider a show- stopper. I.e. graphical consoles on sun4u machines should either work out of the box or by plugging in a card that is supported by either creator(4) or machfb(4). The exception obviously are SBus-only machines without UPA slots like some Ultra 1 (but which also still lack support in other areas) and certain Exx0 (but which probably are mainly used with serial consoles anyway). I'll try to add a cgsix(4) for these later as Sun CG6 cards are probably the most common SBus framebuffer cards in sun4u machines. I however don't see much sense in adding drivers for the dozen of SBus framebuffers that were destined for sparc v8 machines. The rest of the USB drivers aren't enabled as I'm only aware of ukbd(4) and ums(4) as well as ohci(4) working with the on-board ALI M5237 and Sun PCIO-2 controllers. Aue(4) definitely doesn't work on sparc64, yet. Thanks to: - Jake for the initial work on syscons(4) on sparc64 and creator(4). - Marcel for uart(4) and especially for its support for the SCCs which are only used on sparc64 so far. In various regards it wouldn't have been possible to enable syscons(4) by default on sparc64, yet, without uart(4). - All that tested patches. Ok'ed by: scottl (RE hat), tmm
229 lines
8.2 KiB
Plaintext
229 lines
8.2 KiB
Plaintext
#
|
|
# GENERIC -- Generic kernel configuration file for FreeBSD/sparc64
|
|
#
|
|
# For more information on this file, please read the handbook section on
|
|
# Kernel Configuration Files:
|
|
#
|
|
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
|
|
#
|
|
# The handbook is also available locally in /usr/share/doc/handbook
|
|
# if you've installed the doc distribution, otherwise always see the
|
|
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
|
|
# latest information.
|
|
#
|
|
# An exhaustive list of options and more detailed explanations of the
|
|
# device lines is also present in the ../../conf/NOTES and NOTES files.
|
|
# If you are in doubt as to the purpose or necessity of a line, check first
|
|
# in NOTES.
|
|
#
|
|
# For hardware specific information check HARDWARE.TXT
|
|
#
|
|
# $FreeBSD$
|
|
|
|
machine sparc64
|
|
cpu SUN4U
|
|
ident GENERIC
|
|
|
|
# To statically compile in device wiring instead of /boot/device.hints
|
|
#hints "GENERIC.hints" # Default places to look for devices.
|
|
|
|
makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
|
|
|
|
# Platforms supported
|
|
# At this time all platforms are supported, as-is.
|
|
|
|
#options SCHED_ULE # ULE scheduler
|
|
options SCHED_4BSD # 4BSD scheduler
|
|
#options PREEMPTION # Enable kernel thread preemption
|
|
options INET # InterNETworking
|
|
options INET6 # IPv6 communications protocols
|
|
options FFS # Berkeley Fast Filesystem
|
|
options SOFTUPDATES # Enable FFS soft updates support
|
|
options UFS_ACL # Support for access control lists
|
|
options UFS_DIRHASH # Improve performance on big directories
|
|
options MD_ROOT # MD is a potential root device
|
|
options NFSCLIENT # Network Filesystem Client
|
|
options NFSSERVER # Network Filesystem Server
|
|
options NFS_ROOT # NFS usable as /, requires NFSCLIENT
|
|
#options MSDOSFS # MSDOS Filesystem
|
|
options CD9660 # ISO 9660 Filesystem
|
|
options PROCFS # Process filesystem (requires PSEUDOFS)
|
|
options PSEUDOFS # Pseudo-filesystem framework
|
|
options GEOM_GPT # GUID Partition Tables.
|
|
options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!]
|
|
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
|
|
options KTRACE # ktrace(1) support
|
|
options SYSVSHM # SYSV-style shared memory
|
|
options SYSVMSG # SYSV-style message queues
|
|
options SYSVSEM # SYSV-style semaphores
|
|
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
|
|
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
|
|
# output. Adds ~128k to driver.
|
|
options ADAPTIVE_GIANT # Giant mutex is adaptive.
|
|
|
|
# Debugging for use in -current
|
|
options KDB # Enable kernel debugger support.
|
|
options DDB # Support DDB.
|
|
options GDB # Support remote GDB.
|
|
options INVARIANTS # Enable calls of extra sanity checking
|
|
options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS
|
|
options WITNESS # Enable checks to detect deadlocks and cycles
|
|
options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed
|
|
|
|
# To make an SMP kernel, the next line is needed
|
|
options SMP # Symmetric MultiProcessor Kernel
|
|
|
|
# Standard busses
|
|
device ebus
|
|
device isa
|
|
device pci
|
|
device sbus
|
|
device central
|
|
device fhc
|
|
|
|
# Floppy drives
|
|
#device fdc
|
|
|
|
# ATA and ATAPI devices
|
|
device ata
|
|
device atadisk # ATA disk drives
|
|
device atapicd # ATAPI CDROM drives
|
|
#device atapifd # ATAPI floppy drives
|
|
#device atapist # ATAPI tape drives
|
|
# Do NOT enable ATA_STATIC_ID -- cmd646 controller will be !ata2!,
|
|
# and you will not mount an ATA /.
|
|
#options ATA_STATIC_ID # Static device numbering
|
|
|
|
# SCSI Controllers
|
|
device ahc # AHA2940 and onboard AIC7xxx devices
|
|
device isp # Qlogic family
|
|
device ispfw # Firmware module for Qlogic host adapters
|
|
#device mpt # LSI-Logic MPT-Fusion (not yet)
|
|
#device ncr # NCR/Symbios Logic
|
|
device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
|
|
device esp # NCR53c9x (FEPS/FAS366)
|
|
|
|
# SCSI peripherals
|
|
device scbus # SCSI bus (required for SCSI)
|
|
device ch # SCSI media changers
|
|
device da # Direct Access (disks)
|
|
device sa # Sequential Access (tape etc)
|
|
device cd # CD
|
|
device pass # Passthrough device (direct SCSI access)
|
|
device ses # SCSI Environmental Services (and SAF-TE)
|
|
|
|
# RAID controllers
|
|
#device amr # AMI MegaRAID
|
|
#device mlx # Mylex DAC960 family
|
|
|
|
# atkbdc0 controls both the keyboard and the PS/2 mouse
|
|
device atkbdc # AT keyboard controller
|
|
device atkbd # AT keyboard
|
|
device psm # PS/2 mouse
|
|
|
|
# syscons is the default console driver, resembling an SCO console
|
|
device sc
|
|
device creator # Creator, Creator3D and Elite3D framebuffers
|
|
device machfb # ATI Mach64 framebuffers
|
|
#device splash # Splash screen and screen saver support
|
|
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
|
|
|
|
#device ofw_console # Open Firmware console device
|
|
|
|
# Builtin hardware
|
|
device auxio # auxiliary I/O device
|
|
device clkbrd # Clock Board (blinkenlight on Sun Exx00)
|
|
device genclock # Generic clock interface
|
|
device eeprom # eeprom (really a front-end for the MK48Txx)
|
|
device mk48txx # Mostek MK48Txx clocks
|
|
device rtc # rtc (really a front-end for the MC146818)
|
|
device mc146818 # Motorola MC146818 and compatible clocks
|
|
|
|
# Serial (COM) ports
|
|
#device sab # Siemens SAB82532 based serial ports
|
|
device uart # Multi-uart driver
|
|
device puc # Multi-channel uarts
|
|
|
|
# Parallel port
|
|
#device ppc
|
|
#device ppbus # Parallel port bus (required)
|
|
#device lpt # Printer
|
|
#device plip # TCP/IP over parallel
|
|
#device ppi # Parallel port interface device
|
|
#device vpo # Requires scbus and da
|
|
|
|
# PCI Ethernet NICs.
|
|
#device de # DEC/Intel DC21x4x (``Tulip'')
|
|
#device em # Intel PRO/1000 adapter Gigabit Ethernet Card
|
|
#device ixgb # Intel PRO/10GbE Ethernet Card
|
|
#device lnc # NE2100, NE32-VL Lance Ethernet cards
|
|
#device txp # 3Com 3cR990 (``Typhoon'')
|
|
#device vx # 3Com 3c590, 3c595 (``Vortex'')
|
|
|
|
# PCI Ethernet NICs that use the common MII bus controller code.
|
|
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
|
|
device miibus # MII bus support
|
|
#device bfe # Broadcom BCM440x 10/100 Ethernet
|
|
#device bge # Broadcom BCM570xx Gigabit Ethernet
|
|
device dc # DEC/Intel 21143 and various workalikes
|
|
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
|
|
device gem # Sun GEM/Sun ERI/Apple GMAC
|
|
device hme # Sun HME (Happy Meal Ethernet)
|
|
#device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc')
|
|
device re # RealTek 8139C+/8169/8169S/8110S
|
|
device rl # RealTek 8129/8139
|
|
#device sf # Adaptec AIC-6915 (``Starfire'')
|
|
#device sis # Silicon Integrated Systems SiS 900/SiS 7016
|
|
#device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
|
|
#device ste # Sundance ST201 (D-Link DFE-550TX)
|
|
#device ti # Alteon Networks Tigon I/II gigabit Ethernet
|
|
#device tl # Texas Instruments ThunderLAN
|
|
#device tx # SMC EtherPower II (83c170 ``EPIC'')
|
|
#device vr # VIA Rhine, Rhine II
|
|
#device wb # Winbond W89C840F
|
|
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
|
|
|
|
# Pseudo devices.
|
|
device loop # Network loopback
|
|
device mem # Memory and kernel memory devices
|
|
device random # Entropy device
|
|
device ether # Ethernet support
|
|
device sl # Kernel SLIP
|
|
device ppp # Kernel PPP
|
|
device tun # Packet tunnel.
|
|
device pty # Pseudo-ttys (telnet etc)
|
|
device md # Memory "disks"
|
|
device gif # IPv6 and IPv4 tunneling
|
|
device faith # IPv6-to-IPv4 relaying (translation)
|
|
|
|
# The `bpf' device enables the Berkeley Packet Filter.
|
|
# Be aware of the administrative consequences of enabling this!
|
|
# Note that 'bpf' is required for DHCP.
|
|
device bpf # Berkeley packet filter
|
|
|
|
# USB support
|
|
#device uhci # UHCI PCI->USB interface
|
|
device ohci # OHCI PCI->USB interface
|
|
device usb # USB Bus (required)
|
|
#device udbp # USB Double Bulk Pipe devices
|
|
#device ugen # Generic
|
|
#device uhid # "Human Interface Devices"
|
|
device ukbd # Keyboard
|
|
#device ulpt # Printer
|
|
#device umass # Disks/Mass storage - Requires scbus and da
|
|
device ums # Mouse
|
|
#device urio # Diamond Rio 500 MP3 player
|
|
#device uscanner # Scanners
|
|
# USB Ethernet, requires mii
|
|
#device aue # ADMtek USB Ethernet
|
|
#device axe # ASIX Electronics USB Ethernet
|
|
#device cdce # Generic USB over Ethernet
|
|
#device cue # CATC USB Ethernet
|
|
#device kue # Kawasaki LSI USB Ethernet
|
|
#device rue # RealTek RTL8150 USB Ethernet
|
|
|
|
# FireWire support
|
|
device firewire # FireWire bus code
|
|
device sbp # SCSI over FireWire (Requires scbus and da)
|
|
device fwe # Ethernet over FireWire (non-standard!)
|