freebsd-skq/sys/powerpc/mpc85xx/ocpbus.h
Rafal Jaworowski 6b7ba54456 Initial support for Freescale PowerQUICC III MPC85xx system-on-chip family.
The PQ3 is a high performance integrated communications processing system
based on the e500 core, which is an embedded RISC processor that implements
the 32-bit Book E definition of the PowerPC architecture. For details refer
to: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC8555E

This port was tested and successfully run on the following members of the PQ3
family: MPC8533, MPC8541, MPC8548, MPC8555.

The following major integrated peripherals are supported:

  * On-chip peripherals bus
  * OpenPIC interrupt controller
  * UART
  * Ethernet (TSEC)
  * Host/PCI bridge
  * QUICC engine (SCC functionality)

This commit brings the main functionality and will be followed by individual
drivers that are logically separate from this base.

Approved by:	cognet (mentor)
Obtained from:	Juniper, Semihalf
MFp4:		e500
2008-03-03 17:17:00 +00:00

87 lines
2.9 KiB
C

/*-
* Copyright 2006 by Juniper Networks. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _MACHINE_OCP85XX_H_
#define _MACHINE_OCP85XX_H_
/*
* Local access registers.
*/
#define OCP85XX_LAWBAR(n) (CCSRBAR_VA + 0xc08 + 0x20 * (n))
#define OCP85XX_LAWSR(n) (CCSRBAR_VA + 0xc10 + 0x20 * (n))
/*
* Power-On Reset configuration.
*/
#define OCP85XX_PORDEVSR (CCSRBAR_VA + 0xe000c)
#define OCP85XX_PORDEVSR2 (CCSRBAR_VA + 0xe0014)
/*
* OCP Bus Definitions
*/
#define OCP85XX_I2C0_OFF 0x03000
#define OCP85XX_I2C1_OFF 0x03100
#define OCP85XX_I2C_SIZE 0x15
#define OCP85XX_UART0_OFF 0x04500
#define OCP85XX_UART1_OFF 0x04600
#define OCP85XX_UART_SIZE 0x10
#define OCP85XX_LBC_OFF 0x05000
#define OCP85XX_LBC_SIZE 0x1000
#define OCP85XX_PCI0_OFF 0x08000
#define OCP85XX_PCI1_OFF 0x09000
#define OCP85XX_PCI2_OFF 0x0A000
#define OCP85XX_PCI_SIZE 0x1000
#define OCP85XX_TSEC0_OFF 0x24000
#define OCP85XX_TSEC1_OFF 0x25000
#define OCP85XX_TSEC2_OFF 0x26000
#define OCP85XX_TSEC3_OFF 0x27000
#define OCP85XX_TSEC_SIZE 0x1000
#define OCP85XX_OPENPIC_OFF 0x40000
#define OCP85XX_OPENPIC_SIZE 0x200B4
#define OCP85XX_QUICC_OFF 0x80000
#define OCP85XX_QUICC_SIZE 0x20000
#define OCP85XX_TGTIF_PCI0 0
#define OCP85XX_TGTIF_PCI1 1
#define OCP85XX_TGTIF_PCI2 2
#define OCP85XX_TGTIF_LBC 4
#define OCP85XX_TGTIF_RAM 15
/*
* PIC definitions
*/
#define ISA_IRQ_START 0
#define PIC_IRQ_START (ISA_IRQ_START + 16)
#define ISA_IRQ(n) (ISA_IRQ_START + (n))
#define PIC_IRQ_EXT(n) (PIC_IRQ_START + (n))
#define PIC_IRQ_INT(n) (PIC_IRQ_START + 16 + (n))
#endif /* _MACHINE_OCP85XX_H */