freebsd-skq/sys/dev/idt/idtvar.h
2003-01-01 18:49:04 +00:00

229 lines
8.1 KiB
C

/*
* Copyright (c) 2000, 2001 Richard Hodges and Matriplex, inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Matriplex, inc.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*
* This driver is derived from the Nicstar driver by Mark Tinguely, and
* some of the original driver still exists here. Those portions are...
* Copyright (c) 1996, 1997, 1998, 1999 Mark Tinguely
* All rights reserved.
*
******************************************************************************
*
* This driver supports the Fore LE155, LE25, and IDT 77211 cards.
*
* ATM CBR connections are supported, and bandwidth is allocated in
* slots of 64k each. Three VBR queues handle traffic for VBR and
* UBR. Two UBR queues prioritize UBR traffic. ILMI and signalling
* get the higher priority queue, as well as UBR traffic that specifies
* a peak cell rate. All other UBR traffic goes into the lower queue.
*
******************************************************************************
*
* $FreeBSD$
*/
/*******************************************************************************
*
* New data types
*/
typedef struct {
struct mbuf *mget; /* head of mbuf queue, pull mbufs from here */
struct mbuf **mput; /* tail (ptr to m_nextpkt) put mbufs here */
u_long scd; /* segmentation channel descriptor address */
u_long *scq_base; /* segmentation channel queue base address */
u_long *scq_next; /* next address */
u_long *scq_last; /* last address written */
int scq_len; /* size of SCQ buffer (64 or 512) */
int scq_cur; /* current number entries in SCQ buffer */
int rate; /* cells per second allocated to this queue */
int vbr_m; /* VBR m/n = max duty cycle for queue */
int vbr_n; /* 1 <= m <= 7 and 1 <= n <= 127 */
} TX_QUEUE;
/* To avoid expensive SRAM reads, scq_cur tracks the number of SCQ entries
* in use. Only idt_transmit_top may increase this, and only idt_intr_tsq
* may decrease it.
*/
/* mbuf chains on the queue use the fields:
* m_next is the usual pointer to next mbuf
* m_nextpkt is the next packet on the queue
* m_pkthdr.rcvif is a pointer to the connection
* m_pkthdr.header is a pointer to the TX queue
*/
typedef struct {
struct vccb *vccinf;
char status; /* zero if closed */
char vpi;
u_short vci;
TX_QUEUE *queue; /* transmit queue for this connection */
struct mbuf *recv; /* current receive mbuf, or NULL */
int rlen; /* current receive length */
int maxpdu; /* largest PDU we will ever see */
int traf_pcr; /* peak cell rate */
int traf_scr; /* sustained cell rate */
u_char aal; /* AAL for this connection */
u_char class; /* T_ATM_CBR, T_ATM_VBR, or T_ATM_UBR */
u_char flg_mpeg2ts:1; /* send data as 2 TS == 8 AAL5 cells */
u_char flg_clp:1; /* CLP flag for outbound cells */
} CONNECTION;
#define MAX_CONNECTION 4096 /* max number of connections */
#define GET_RDTSC(var) {__asm__ volatile("rdtsc":"=A"(var)); }
/*******************************************************************************
*
* Device softc structure
*/
struct idt_softc {
/* HARP data */
/* XXX: must be first member of struct. */
Cmn_unit iu_cmn; /* Common unit stuff */
#if 0
struct arpcom idt_ac; /* ifnet for device */
#endif
/* Device data */
device_t dev;
int debug;
struct resource * mem;
int mem_rid;
int mem_type;
bus_space_tag_t bustag;
bus_space_handle_t bushandle;
struct resource * irq;
int irq_rid;
void * irq_ih;
struct callout_handle ch;
struct mtx mtx;
vm_offset_t virt_baseaddr; /* nicstar register virtual address */
vm_offset_t cmd_reg; /* command register offset 0x14 */
vm_offset_t stat_reg; /* status register offset 0x60 */
vm_offset_t fixbuf; /* buffer that holds TSQ, RSQ, variable SCQ */
u_long timer_wrap; /* keep track of wrapped timers */
u_long rsqh; /* Recieve Status Queue, reg is write-only */
CONNECTION *connection; /* connection table */
int conn_maxvpi; /* number of VPI values */
int conn_maxvci; /* number of VCI values */
int cellrate_rmax; /* max RX cells per second */
int cellrate_tmax; /* max TX cells per second */
int cellrate_rcur; /* current committed RX cellrate */
int cellrate_tcur; /* current committed TX cellrate */
int txslots_max; /* number of CBR TX slots for interface */
int txslots_cur; /* current CBR TX slots in use */
TX_QUEUE cbr_txqb[IDT_MAX_CBRQUEUE];
TX_QUEUE *cbr_slot[IDT_MAX_CBRSLOTS];
TX_QUEUE *cbr_free[IDT_MAX_CBRQUEUE];
TX_QUEUE queue_vbr;
TX_QUEUE queue_abr;
TX_QUEUE queue_ubr;
vm_offset_t cbr_base; /* base of memory for CBR TX queues */
int cbr_size; /* size of memory for CBR TX queues */
int cbr_freect;
u_long raw_headp; /* head of raw cell queue, physical */
struct mbuf *raw_headm; /* head of raw cell queue, virtual */
u_long *tsq_base; /* virtual TSQ base address */
u_long *tsq_head; /* virtual TSQ head pointer */
int tsq_size; /* number of TSQ entries (1024) */
volatile u_long *reg_cfg;
volatile u_long *reg_cmd;
volatile u_long *reg_data;
volatile u_long *reg_tsqh;
volatile u_long *reg_gp;
volatile u_long *reg_stat;
struct mbuf **mcheck;
int sram; /* amount of SRAM */
int pci_rev; /* hardware revision ID */
char *hardware; /* hardware description string */
u_char flg_le25:1; /* flag indicates LE25 instead of LE155 */
u_char flg_igcrc:1; /* ignore receive CRC errors */
};
typedef struct idt_softc nicstar_reg_t;
typedef struct idt_softc IDT;
#define iu_pif iu_cmn.cu_pif
#define stats_ipdus iu_pif.pif_ipdus
#define stats_opdus iu_pif.pif_opdus
#define stats_ibytes iu_pif.pif_ibytes
#define stats_obytes iu_pif.pif_obytes
#define stats_ierrors iu_pif.pif_ierrors
#define stats_oerrors iu_pif.pif_oerrors
#define stats_cmderrors iu_pif.pif_cmderrors
/*
* Device VCC Entry
*
* Contains the common and IDT-specific information for each VCC
* which is opened through an IDT device.
*/
struct nidt_vcc {
struct cmn_vcc iv_cmn; /* Common VCC stuff */
};
typedef struct nidt_vcc Idt_vcc;
extern int idt_sysctl_logvcs;
extern int idt_sysctl_vbriscbr;
void nicstar_intr(void *);
void phys_init(nicstar_reg_t * const);
void nicstar_init(nicstar_reg_t * const);
int idt_harp_init(nicstar_reg_t * const);
void idt_device_stop(IDT *);
void idt_release_mem(IDT *);
CONNECTION *idt_connect_find(IDT *, int, int);
caddr_t idt_mbuf_base(struct mbuf *);
int idt_slots_cbr(IDT *, int);
int idt_connect_opencls(IDT *, CONNECTION *, int);
int idt_connect_txopen(IDT *, CONNECTION *);
int idt_connect_txclose(IDT *, CONNECTION *);
int nicstar_eeprom_rd(nicstar_reg_t * const, u_long);
void idt_receive(IDT *, struct mbuf *, int, int);
void idt_transmit(IDT *, struct mbuf *, int, int, int);