11947ff83f
control for all vr(4) controllers that support it. It's known that old vr(4) controllers(Rhine II) does not support TX pause but Rhine III supports both TX and RX pause. Make TX pause really work on Rhine III by letting controller know available RX buffers. While here, adjust XON/XOFF parameters to get better performance with flow control.
2637 lines
68 KiB
C
2637 lines
68 KiB
C
/*-
|
|
* Copyright (c) 1997, 1998
|
|
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Bill Paul.
|
|
* 4. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/*
|
|
* VIA Rhine fast ethernet PCI NIC driver
|
|
*
|
|
* Supports various network adapters based on the VIA Rhine
|
|
* and Rhine II PCI controllers, including the D-Link DFE530TX.
|
|
* Datasheets are available at http://www.via.com.tw.
|
|
*
|
|
* Written by Bill Paul <wpaul@ctr.columbia.edu>
|
|
* Electrical Engineering Department
|
|
* Columbia University, New York City
|
|
*/
|
|
|
|
/*
|
|
* The VIA Rhine controllers are similar in some respects to the
|
|
* the DEC tulip chips, except less complicated. The controller
|
|
* uses an MII bus and an external physical layer interface. The
|
|
* receiver has a one entry perfect filter and a 64-bit hash table
|
|
* multicast filter. Transmit and receive descriptors are similar
|
|
* to the tulip.
|
|
*
|
|
* Some Rhine chips has a serious flaw in its transmit DMA mechanism:
|
|
* transmit buffers must be longword aligned. Unfortunately,
|
|
* FreeBSD doesn't guarantee that mbufs will be filled in starting
|
|
* at longword boundaries, so we have to do a buffer copy before
|
|
* transmission.
|
|
*/
|
|
|
|
#ifdef HAVE_KERNEL_OPTION_HEADERS
|
|
#include "opt_device_polling.h"
|
|
#endif
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/module.h>
|
|
#include <sys/rman.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/taskqueue.h>
|
|
|
|
#include <net/bpf.h>
|
|
#include <net/if.h>
|
|
#include <net/ethernet.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
#include <net/if_types.h>
|
|
#include <net/if_vlan_var.h>
|
|
|
|
#include <dev/mii/mii.h>
|
|
#include <dev/mii/miivar.h>
|
|
|
|
#include <dev/pci/pcireg.h>
|
|
#include <dev/pci/pcivar.h>
|
|
|
|
#include <machine/bus.h>
|
|
|
|
#include <dev/vr/if_vrreg.h>
|
|
|
|
/* "device miibus" required. See GENERIC if you get errors here. */
|
|
#include "miibus_if.h"
|
|
|
|
MODULE_DEPEND(vr, pci, 1, 1, 1);
|
|
MODULE_DEPEND(vr, ether, 1, 1, 1);
|
|
MODULE_DEPEND(vr, miibus, 1, 1, 1);
|
|
|
|
/* Define to show Rx/Tx error status. */
|
|
#undef VR_SHOW_ERRORS
|
|
#define VR_CSUM_FEATURES (CSUM_IP | CSUM_TCP | CSUM_UDP)
|
|
|
|
/*
|
|
* Various supported device vendors/types, their names & quirks.
|
|
*/
|
|
#define VR_Q_NEEDALIGN (1<<0)
|
|
#define VR_Q_CSUM (1<<1)
|
|
#define VR_Q_CAM (1<<2)
|
|
|
|
static const struct vr_type {
|
|
u_int16_t vr_vid;
|
|
u_int16_t vr_did;
|
|
int vr_quirks;
|
|
const char *vr_name;
|
|
} const vr_devs[] = {
|
|
{ VIA_VENDORID, VIA_DEVICEID_RHINE,
|
|
VR_Q_NEEDALIGN,
|
|
"VIA VT3043 Rhine I 10/100BaseTX" },
|
|
{ VIA_VENDORID, VIA_DEVICEID_RHINE_II,
|
|
VR_Q_NEEDALIGN,
|
|
"VIA VT86C100A Rhine II 10/100BaseTX" },
|
|
{ VIA_VENDORID, VIA_DEVICEID_RHINE_II_2,
|
|
0,
|
|
"VIA VT6102 Rhine II 10/100BaseTX" },
|
|
{ VIA_VENDORID, VIA_DEVICEID_RHINE_III,
|
|
0,
|
|
"VIA VT6105 Rhine III 10/100BaseTX" },
|
|
{ VIA_VENDORID, VIA_DEVICEID_RHINE_III_M,
|
|
VR_Q_CSUM,
|
|
"VIA VT6105M Rhine III 10/100BaseTX" },
|
|
{ DELTA_VENDORID, DELTA_DEVICEID_RHINE_II,
|
|
VR_Q_NEEDALIGN,
|
|
"Delta Electronics Rhine II 10/100BaseTX" },
|
|
{ ADDTRON_VENDORID, ADDTRON_DEVICEID_RHINE_II,
|
|
VR_Q_NEEDALIGN,
|
|
"Addtron Technology Rhine II 10/100BaseTX" },
|
|
{ 0, 0, 0, NULL }
|
|
};
|
|
|
|
static int vr_probe(device_t);
|
|
static int vr_attach(device_t);
|
|
static int vr_detach(device_t);
|
|
static int vr_shutdown(device_t);
|
|
static int vr_suspend(device_t);
|
|
static int vr_resume(device_t);
|
|
|
|
static void vr_dmamap_cb(void *, bus_dma_segment_t *, int, int);
|
|
static int vr_dma_alloc(struct vr_softc *);
|
|
static void vr_dma_free(struct vr_softc *);
|
|
static __inline void vr_discard_rxbuf(struct vr_rxdesc *);
|
|
static int vr_newbuf(struct vr_softc *, int);
|
|
|
|
#ifndef __NO_STRICT_ALIGNMENT
|
|
static __inline void vr_fixup_rx(struct mbuf *);
|
|
#endif
|
|
static int vr_rxeof(struct vr_softc *);
|
|
static void vr_txeof(struct vr_softc *);
|
|
static void vr_tick(void *);
|
|
static int vr_error(struct vr_softc *, uint16_t);
|
|
static void vr_tx_underrun(struct vr_softc *);
|
|
static void vr_intr(void *);
|
|
static void vr_start(struct ifnet *);
|
|
static void vr_start_locked(struct ifnet *);
|
|
static int vr_encap(struct vr_softc *, struct mbuf **);
|
|
static int vr_ioctl(struct ifnet *, u_long, caddr_t);
|
|
static void vr_init(void *);
|
|
static void vr_init_locked(struct vr_softc *);
|
|
static void vr_tx_start(struct vr_softc *);
|
|
static void vr_rx_start(struct vr_softc *);
|
|
static int vr_tx_stop(struct vr_softc *);
|
|
static int vr_rx_stop(struct vr_softc *);
|
|
static void vr_stop(struct vr_softc *);
|
|
static void vr_watchdog(struct vr_softc *);
|
|
static int vr_ifmedia_upd(struct ifnet *);
|
|
static void vr_ifmedia_sts(struct ifnet *, struct ifmediareq *);
|
|
|
|
static int vr_miibus_readreg(device_t, int, int);
|
|
static int vr_miibus_writereg(device_t, int, int, int);
|
|
static void vr_miibus_statchg(device_t);
|
|
|
|
static void vr_cam_mask(struct vr_softc *, uint32_t, int);
|
|
static int vr_cam_data(struct vr_softc *, int, int, uint8_t *);
|
|
static void vr_set_filter(struct vr_softc *);
|
|
static void vr_reset(const struct vr_softc *);
|
|
static int vr_tx_ring_init(struct vr_softc *);
|
|
static int vr_rx_ring_init(struct vr_softc *);
|
|
static void vr_setwol(struct vr_softc *);
|
|
static void vr_clrwol(struct vr_softc *);
|
|
static int vr_sysctl_stats(SYSCTL_HANDLER_ARGS);
|
|
|
|
static const struct vr_tx_threshold_table {
|
|
int tx_cfg;
|
|
int bcr_cfg;
|
|
int value;
|
|
} const vr_tx_threshold_tables[] = {
|
|
{ VR_TXTHRESH_64BYTES, VR_BCR1_TXTHRESH64BYTES, 64 },
|
|
{ VR_TXTHRESH_128BYTES, VR_BCR1_TXTHRESH128BYTES, 128 },
|
|
{ VR_TXTHRESH_256BYTES, VR_BCR1_TXTHRESH256BYTES, 256 },
|
|
{ VR_TXTHRESH_512BYTES, VR_BCR1_TXTHRESH512BYTES, 512 },
|
|
{ VR_TXTHRESH_1024BYTES, VR_BCR1_TXTHRESH1024BYTES, 1024 },
|
|
{ VR_TXTHRESH_STORENFWD, VR_BCR1_TXTHRESHSTORENFWD, 2048 }
|
|
};
|
|
|
|
static device_method_t vr_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, vr_probe),
|
|
DEVMETHOD(device_attach, vr_attach),
|
|
DEVMETHOD(device_detach, vr_detach),
|
|
DEVMETHOD(device_shutdown, vr_shutdown),
|
|
DEVMETHOD(device_suspend, vr_suspend),
|
|
DEVMETHOD(device_resume, vr_resume),
|
|
|
|
/* MII interface */
|
|
DEVMETHOD(miibus_readreg, vr_miibus_readreg),
|
|
DEVMETHOD(miibus_writereg, vr_miibus_writereg),
|
|
DEVMETHOD(miibus_statchg, vr_miibus_statchg),
|
|
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
static driver_t vr_driver = {
|
|
"vr",
|
|
vr_methods,
|
|
sizeof(struct vr_softc)
|
|
};
|
|
|
|
static devclass_t vr_devclass;
|
|
|
|
DRIVER_MODULE(vr, pci, vr_driver, vr_devclass, 0, 0);
|
|
DRIVER_MODULE(miibus, vr, miibus_driver, miibus_devclass, 0, 0);
|
|
|
|
static int
|
|
vr_miibus_readreg(device_t dev, int phy, int reg)
|
|
{
|
|
struct vr_softc *sc;
|
|
int i;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
/* Set the register address. */
|
|
CSR_WRITE_1(sc, VR_MIIADDR, reg);
|
|
VR_SETBIT(sc, VR_MIICMD, VR_MIICMD_READ_ENB);
|
|
|
|
for (i = 0; i < VR_MII_TIMEOUT; i++) {
|
|
DELAY(1);
|
|
if ((CSR_READ_1(sc, VR_MIICMD) & VR_MIICMD_READ_ENB) == 0)
|
|
break;
|
|
}
|
|
if (i == VR_MII_TIMEOUT)
|
|
device_printf(sc->vr_dev, "phy read timeout %d:%d\n", phy, reg);
|
|
|
|
return (CSR_READ_2(sc, VR_MIIDATA));
|
|
}
|
|
|
|
static int
|
|
vr_miibus_writereg(device_t dev, int phy, int reg, int data)
|
|
{
|
|
struct vr_softc *sc;
|
|
int i;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
/* Set the register address and data to write. */
|
|
CSR_WRITE_1(sc, VR_MIIADDR, reg);
|
|
CSR_WRITE_2(sc, VR_MIIDATA, data);
|
|
VR_SETBIT(sc, VR_MIICMD, VR_MIICMD_WRITE_ENB);
|
|
|
|
for (i = 0; i < VR_MII_TIMEOUT; i++) {
|
|
DELAY(1);
|
|
if ((CSR_READ_1(sc, VR_MIICMD) & VR_MIICMD_WRITE_ENB) == 0)
|
|
break;
|
|
}
|
|
if (i == VR_MII_TIMEOUT)
|
|
device_printf(sc->vr_dev, "phy write timeout %d:%d\n", phy,
|
|
reg);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* In order to fiddle with the
|
|
* 'full-duplex' and '100Mbps' bits in the netconfig register, we
|
|
* first have to put the transmit and/or receive logic in the idle state.
|
|
*/
|
|
static void
|
|
vr_miibus_statchg(device_t dev)
|
|
{
|
|
struct vr_softc *sc;
|
|
struct mii_data *mii;
|
|
struct ifnet *ifp;
|
|
int lfdx, mfdx;
|
|
uint8_t cr0, cr1, fc;
|
|
|
|
sc = device_get_softc(dev);
|
|
mii = device_get_softc(sc->vr_miibus);
|
|
ifp = sc->vr_ifp;
|
|
if (mii == NULL || ifp == NULL ||
|
|
(ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
|
|
return;
|
|
|
|
sc->vr_flags &= ~(VR_F_LINK | VR_F_TXPAUSE);
|
|
if ((mii->mii_media_status & (IFM_ACTIVE | IFM_AVALID)) ==
|
|
(IFM_ACTIVE | IFM_AVALID)) {
|
|
switch (IFM_SUBTYPE(mii->mii_media_active)) {
|
|
case IFM_10_T:
|
|
case IFM_100_TX:
|
|
sc->vr_flags |= VR_F_LINK;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
if ((sc->vr_flags & VR_F_LINK) != 0) {
|
|
cr0 = CSR_READ_1(sc, VR_CR0);
|
|
cr1 = CSR_READ_1(sc, VR_CR1);
|
|
mfdx = (cr1 & VR_CR1_FULLDUPLEX) != 0;
|
|
lfdx = (IFM_OPTIONS(mii->mii_media_active) & IFM_FDX) != 0;
|
|
if (mfdx != lfdx) {
|
|
if ((cr0 & (VR_CR0_TX_ON | VR_CR0_RX_ON)) != 0) {
|
|
if (vr_tx_stop(sc) != 0 ||
|
|
vr_rx_stop(sc) != 0) {
|
|
device_printf(sc->vr_dev,
|
|
"%s: Tx/Rx shutdown error -- "
|
|
"resetting\n", __func__);
|
|
sc->vr_flags |= VR_F_RESTART;
|
|
VR_UNLOCK(sc);
|
|
return;
|
|
}
|
|
}
|
|
if (lfdx)
|
|
cr1 |= VR_CR1_FULLDUPLEX;
|
|
else
|
|
cr1 &= ~VR_CR1_FULLDUPLEX;
|
|
CSR_WRITE_1(sc, VR_CR1, cr1);
|
|
}
|
|
fc = 0;
|
|
/* Configure flow-control. */
|
|
if (sc->vr_revid >= REV_ID_VT6105_A0) {
|
|
fc = CSR_READ_1(sc, VR_FLOWCR1);
|
|
fc &= ~(VR_FLOWCR1_TXPAUSE | VR_FLOWCR1_RXPAUSE);
|
|
if ((IFM_OPTIONS(mii->mii_media_active) &
|
|
IFM_ETH_RXPAUSE) != 0)
|
|
fc |= VR_FLOWCR1_RXPAUSE;
|
|
if ((IFM_OPTIONS(mii->mii_media_active) &
|
|
IFM_ETH_TXPAUSE) != 0) {
|
|
fc |= VR_FLOWCR1_TXPAUSE;
|
|
sc->vr_flags |= VR_F_TXPAUSE;
|
|
}
|
|
CSR_WRITE_1(sc, VR_FLOWCR1, fc);
|
|
} else if (sc->vr_revid >= REV_ID_VT6102_A) {
|
|
/* No Tx puase capability available for Rhine II. */
|
|
fc = CSR_READ_1(sc, VR_MISC_CR0);
|
|
fc &= ~VR_MISCCR0_RXPAUSE;
|
|
if ((IFM_OPTIONS(mii->mii_media_active) &
|
|
IFM_ETH_RXPAUSE) != 0)
|
|
fc |= VR_MISCCR0_RXPAUSE;
|
|
CSR_WRITE_1(sc, VR_MISC_CR0, fc);
|
|
}
|
|
vr_rx_start(sc);
|
|
vr_tx_start(sc);
|
|
} else {
|
|
if (vr_tx_stop(sc) != 0 || vr_rx_stop(sc) != 0) {
|
|
device_printf(sc->vr_dev,
|
|
"%s: Tx/Rx shutdown error -- resetting\n",
|
|
__func__);
|
|
sc->vr_flags |= VR_F_RESTART;
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
static void
|
|
vr_cam_mask(struct vr_softc *sc, uint32_t mask, int type)
|
|
{
|
|
|
|
if (type == VR_MCAST_CAM)
|
|
CSR_WRITE_1(sc, VR_CAMCTL, VR_CAMCTL_ENA | VR_CAMCTL_MCAST);
|
|
else
|
|
CSR_WRITE_1(sc, VR_CAMCTL, VR_CAMCTL_ENA | VR_CAMCTL_VLAN);
|
|
CSR_WRITE_4(sc, VR_CAMMASK, mask);
|
|
CSR_WRITE_1(sc, VR_CAMCTL, 0);
|
|
}
|
|
|
|
static int
|
|
vr_cam_data(struct vr_softc *sc, int type, int idx, uint8_t *mac)
|
|
{
|
|
int i;
|
|
|
|
if (type == VR_MCAST_CAM) {
|
|
if (idx < 0 || idx >= VR_CAM_MCAST_CNT || mac == NULL)
|
|
return (EINVAL);
|
|
CSR_WRITE_1(sc, VR_CAMCTL, VR_CAMCTL_ENA | VR_CAMCTL_MCAST);
|
|
} else
|
|
CSR_WRITE_1(sc, VR_CAMCTL, VR_CAMCTL_ENA | VR_CAMCTL_VLAN);
|
|
|
|
/* Set CAM entry address. */
|
|
CSR_WRITE_1(sc, VR_CAMADDR, idx);
|
|
/* Set CAM entry data. */
|
|
if (type == VR_MCAST_CAM) {
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++)
|
|
CSR_WRITE_1(sc, VR_MCAM0 + i, mac[i]);
|
|
} else {
|
|
CSR_WRITE_1(sc, VR_VCAM0, mac[0]);
|
|
CSR_WRITE_1(sc, VR_VCAM1, mac[1]);
|
|
}
|
|
DELAY(10);
|
|
/* Write CAM and wait for self-clear of VR_CAMCTL_WRITE bit. */
|
|
CSR_WRITE_1(sc, VR_CAMCTL, VR_CAMCTL_ENA | VR_CAMCTL_WRITE);
|
|
for (i = 0; i < VR_TIMEOUT; i++) {
|
|
DELAY(1);
|
|
if ((CSR_READ_1(sc, VR_CAMCTL) & VR_CAMCTL_WRITE) == 0)
|
|
break;
|
|
}
|
|
|
|
if (i == VR_TIMEOUT)
|
|
device_printf(sc->vr_dev, "%s: setting CAM filter timeout!\n",
|
|
__func__);
|
|
CSR_WRITE_1(sc, VR_CAMCTL, 0);
|
|
|
|
return (i == VR_TIMEOUT ? ETIMEDOUT : 0);
|
|
}
|
|
|
|
/*
|
|
* Program the 64-bit multicast hash filter.
|
|
*/
|
|
static void
|
|
vr_set_filter(struct vr_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
int h;
|
|
uint32_t hashes[2] = { 0, 0 };
|
|
struct ifmultiaddr *ifma;
|
|
uint8_t rxfilt;
|
|
int error, mcnt;
|
|
uint32_t cam_mask;
|
|
|
|
VR_LOCK_ASSERT(sc);
|
|
|
|
ifp = sc->vr_ifp;
|
|
rxfilt = CSR_READ_1(sc, VR_RXCFG);
|
|
rxfilt &= ~(VR_RXCFG_RX_PROMISC | VR_RXCFG_RX_BROAD |
|
|
VR_RXCFG_RX_MULTI);
|
|
if (ifp->if_flags & IFF_BROADCAST)
|
|
rxfilt |= VR_RXCFG_RX_BROAD;
|
|
if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
|
|
rxfilt |= VR_RXCFG_RX_MULTI;
|
|
if (ifp->if_flags & IFF_PROMISC)
|
|
rxfilt |= VR_RXCFG_RX_PROMISC;
|
|
CSR_WRITE_1(sc, VR_RXCFG, rxfilt);
|
|
CSR_WRITE_4(sc, VR_MAR0, 0xFFFFFFFF);
|
|
CSR_WRITE_4(sc, VR_MAR1, 0xFFFFFFFF);
|
|
return;
|
|
}
|
|
|
|
/* Now program new ones. */
|
|
error = 0;
|
|
mcnt = 0;
|
|
if_maddr_rlock(ifp);
|
|
if ((sc->vr_quirks & VR_Q_CAM) != 0) {
|
|
/*
|
|
* For hardwares that have CAM capability, use
|
|
* 32 entries multicast perfect filter.
|
|
*/
|
|
cam_mask = 0;
|
|
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
|
|
if (ifma->ifma_addr->sa_family != AF_LINK)
|
|
continue;
|
|
error = vr_cam_data(sc, VR_MCAST_CAM, mcnt,
|
|
LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
|
|
if (error != 0) {
|
|
cam_mask = 0;
|
|
break;
|
|
}
|
|
cam_mask |= 1 << mcnt;
|
|
mcnt++;
|
|
}
|
|
vr_cam_mask(sc, VR_MCAST_CAM, cam_mask);
|
|
}
|
|
|
|
if ((sc->vr_quirks & VR_Q_CAM) == 0 || error != 0) {
|
|
/*
|
|
* If there are too many multicast addresses or
|
|
* setting multicast CAM filter failed, use hash
|
|
* table based filtering.
|
|
*/
|
|
mcnt = 0;
|
|
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
|
|
if (ifma->ifma_addr->sa_family != AF_LINK)
|
|
continue;
|
|
h = ether_crc32_be(LLADDR((struct sockaddr_dl *)
|
|
ifma->ifma_addr), ETHER_ADDR_LEN) >> 26;
|
|
if (h < 32)
|
|
hashes[0] |= (1 << h);
|
|
else
|
|
hashes[1] |= (1 << (h - 32));
|
|
mcnt++;
|
|
}
|
|
}
|
|
if_maddr_runlock(ifp);
|
|
|
|
if (mcnt > 0)
|
|
rxfilt |= VR_RXCFG_RX_MULTI;
|
|
|
|
CSR_WRITE_4(sc, VR_MAR0, hashes[0]);
|
|
CSR_WRITE_4(sc, VR_MAR1, hashes[1]);
|
|
CSR_WRITE_1(sc, VR_RXCFG, rxfilt);
|
|
}
|
|
|
|
static void
|
|
vr_reset(const struct vr_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
/*VR_LOCK_ASSERT(sc);*/ /* XXX: Called during attach w/o lock. */
|
|
|
|
CSR_WRITE_1(sc, VR_CR1, VR_CR1_RESET);
|
|
if (sc->vr_revid < REV_ID_VT6102_A) {
|
|
/* VT86C100A needs more delay after reset. */
|
|
DELAY(100);
|
|
}
|
|
for (i = 0; i < VR_TIMEOUT; i++) {
|
|
DELAY(10);
|
|
if (!(CSR_READ_1(sc, VR_CR1) & VR_CR1_RESET))
|
|
break;
|
|
}
|
|
if (i == VR_TIMEOUT) {
|
|
if (sc->vr_revid < REV_ID_VT6102_A)
|
|
device_printf(sc->vr_dev, "reset never completed!\n");
|
|
else {
|
|
/* Use newer force reset command. */
|
|
device_printf(sc->vr_dev,
|
|
"Using force reset command.\n");
|
|
VR_SETBIT(sc, VR_MISC_CR1, VR_MISCCR1_FORSRST);
|
|
/*
|
|
* Wait a little while for the chip to get its brains
|
|
* in order.
|
|
*/
|
|
DELAY(2000);
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
/*
|
|
* Probe for a VIA Rhine chip. Check the PCI vendor and device
|
|
* IDs against our list and return a match or NULL
|
|
*/
|
|
static const struct vr_type *
|
|
vr_match(device_t dev)
|
|
{
|
|
const struct vr_type *t = vr_devs;
|
|
|
|
for (t = vr_devs; t->vr_name != NULL; t++)
|
|
if ((pci_get_vendor(dev) == t->vr_vid) &&
|
|
(pci_get_device(dev) == t->vr_did))
|
|
return (t);
|
|
return (NULL);
|
|
}
|
|
|
|
/*
|
|
* Probe for a VIA Rhine chip. Check the PCI vendor and device
|
|
* IDs against our list and return a device name if we find a match.
|
|
*/
|
|
static int
|
|
vr_probe(device_t dev)
|
|
{
|
|
const struct vr_type *t;
|
|
|
|
t = vr_match(dev);
|
|
if (t != NULL) {
|
|
device_set_desc(dev, t->vr_name);
|
|
return (BUS_PROBE_DEFAULT);
|
|
}
|
|
return (ENXIO);
|
|
}
|
|
|
|
/*
|
|
* Attach the interface. Allocate softc structures, do ifmedia
|
|
* setup and ethernet/BPF attach.
|
|
*/
|
|
static int
|
|
vr_attach(device_t dev)
|
|
{
|
|
struct vr_softc *sc;
|
|
struct ifnet *ifp;
|
|
const struct vr_type *t;
|
|
uint8_t eaddr[ETHER_ADDR_LEN];
|
|
int error, rid;
|
|
int i, phy, pmc;
|
|
|
|
sc = device_get_softc(dev);
|
|
sc->vr_dev = dev;
|
|
t = vr_match(dev);
|
|
KASSERT(t != NULL, ("Lost if_vr device match"));
|
|
sc->vr_quirks = t->vr_quirks;
|
|
device_printf(dev, "Quirks: 0x%x\n", sc->vr_quirks);
|
|
|
|
mtx_init(&sc->vr_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
|
|
MTX_DEF);
|
|
callout_init_mtx(&sc->vr_stat_callout, &sc->vr_mtx, 0);
|
|
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
|
|
OID_AUTO, "stats", CTLTYPE_INT | CTLFLAG_RW, sc, 0,
|
|
vr_sysctl_stats, "I", "Statistics");
|
|
|
|
error = 0;
|
|
|
|
/*
|
|
* Map control/status registers.
|
|
*/
|
|
pci_enable_busmaster(dev);
|
|
sc->vr_revid = pci_get_revid(dev);
|
|
device_printf(dev, "Revision: 0x%x\n", sc->vr_revid);
|
|
|
|
sc->vr_res_id = PCIR_BAR(0);
|
|
sc->vr_res_type = SYS_RES_IOPORT;
|
|
sc->vr_res = bus_alloc_resource_any(dev, sc->vr_res_type,
|
|
&sc->vr_res_id, RF_ACTIVE);
|
|
if (sc->vr_res == NULL) {
|
|
device_printf(dev, "couldn't map ports\n");
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
/* Allocate interrupt. */
|
|
rid = 0;
|
|
sc->vr_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
|
|
RF_SHAREABLE | RF_ACTIVE);
|
|
|
|
if (sc->vr_irq == NULL) {
|
|
device_printf(dev, "couldn't map interrupt\n");
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
/* Allocate ifnet structure. */
|
|
ifp = sc->vr_ifp = if_alloc(IFT_ETHER);
|
|
if (ifp == NULL) {
|
|
device_printf(dev, "couldn't allocate ifnet structure\n");
|
|
error = ENOSPC;
|
|
goto fail;
|
|
}
|
|
ifp->if_softc = sc;
|
|
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_ioctl = vr_ioctl;
|
|
ifp->if_start = vr_start;
|
|
ifp->if_init = vr_init;
|
|
IFQ_SET_MAXLEN(&ifp->if_snd, VR_TX_RING_CNT - 1);
|
|
ifp->if_snd.ifq_maxlen = VR_TX_RING_CNT - 1;
|
|
IFQ_SET_READY(&ifp->if_snd);
|
|
|
|
/* Configure Tx FIFO threshold. */
|
|
sc->vr_txthresh = VR_TXTHRESH_MIN;
|
|
if (sc->vr_revid < REV_ID_VT6105_A0) {
|
|
/*
|
|
* Use store and forward mode for Rhine I/II.
|
|
* Otherwise they produce a lot of Tx underruns and
|
|
* it would take a while to get working FIFO threshold
|
|
* value.
|
|
*/
|
|
sc->vr_txthresh = VR_TXTHRESH_MAX;
|
|
}
|
|
if ((sc->vr_quirks & VR_Q_CSUM) != 0) {
|
|
ifp->if_hwassist = VR_CSUM_FEATURES;
|
|
ifp->if_capabilities |= IFCAP_HWCSUM;
|
|
/*
|
|
* To update checksum field the hardware may need to
|
|
* store entire frames into FIFO before transmitting.
|
|
*/
|
|
sc->vr_txthresh = VR_TXTHRESH_MAX;
|
|
}
|
|
|
|
if (sc->vr_revid >= REV_ID_VT6102_A &&
|
|
pci_find_cap(dev, PCIY_PMG, &pmc) == 0)
|
|
ifp->if_capabilities |= IFCAP_WOL_UCAST | IFCAP_WOL_MAGIC;
|
|
|
|
/* Rhine supports oversized VLAN frame. */
|
|
ifp->if_capabilities |= IFCAP_VLAN_MTU;
|
|
ifp->if_capenable = ifp->if_capabilities;
|
|
#ifdef DEVICE_POLLING
|
|
ifp->if_capabilities |= IFCAP_POLLING;
|
|
#endif
|
|
|
|
/*
|
|
* Windows may put the chip in suspend mode when it
|
|
* shuts down. Be sure to kick it in the head to wake it
|
|
* up again.
|
|
*/
|
|
if (pci_find_cap(dev, PCIY_PMG, &pmc) == 0)
|
|
VR_CLRBIT(sc, VR_STICKHW, (VR_STICKHW_DS0|VR_STICKHW_DS1));
|
|
|
|
/*
|
|
* Get station address. The way the Rhine chips work,
|
|
* you're not allowed to directly access the EEPROM once
|
|
* they've been programmed a special way. Consequently,
|
|
* we need to read the node address from the PAR0 and PAR1
|
|
* registers.
|
|
* Reloading EEPROM also overwrites VR_CFGA, VR_CFGB,
|
|
* VR_CFGC and VR_CFGD such that memory mapped IO configured
|
|
* by driver is reset to default state.
|
|
*/
|
|
VR_SETBIT(sc, VR_EECSR, VR_EECSR_LOAD);
|
|
for (i = VR_TIMEOUT; i > 0; i--) {
|
|
DELAY(1);
|
|
if ((CSR_READ_1(sc, VR_EECSR) & VR_EECSR_LOAD) == 0)
|
|
break;
|
|
}
|
|
if (i == 0)
|
|
device_printf(dev, "Reloading EEPROM timeout!\n");
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++)
|
|
eaddr[i] = CSR_READ_1(sc, VR_PAR0 + i);
|
|
|
|
/* Reset the adapter. */
|
|
vr_reset(sc);
|
|
/* Ack intr & disable further interrupts. */
|
|
CSR_WRITE_2(sc, VR_ISR, 0xFFFF);
|
|
CSR_WRITE_2(sc, VR_IMR, 0);
|
|
if (sc->vr_revid >= REV_ID_VT6102_A)
|
|
CSR_WRITE_2(sc, VR_MII_IMR, 0);
|
|
|
|
if (sc->vr_revid < REV_ID_VT6102_A) {
|
|
pci_write_config(dev, VR_PCI_MODE2,
|
|
pci_read_config(dev, VR_PCI_MODE2, 1) |
|
|
VR_MODE2_MODE10T, 1);
|
|
} else {
|
|
/* Report error instead of retrying forever. */
|
|
pci_write_config(dev, VR_PCI_MODE2,
|
|
pci_read_config(dev, VR_PCI_MODE2, 1) |
|
|
VR_MODE2_PCEROPT, 1);
|
|
/* Detect MII coding error. */
|
|
pci_write_config(dev, VR_PCI_MODE3,
|
|
pci_read_config(dev, VR_PCI_MODE3, 1) |
|
|
VR_MODE3_MIION, 1);
|
|
if (sc->vr_revid >= REV_ID_VT6105_LOM &&
|
|
sc->vr_revid < REV_ID_VT6105M_A0)
|
|
pci_write_config(dev, VR_PCI_MODE2,
|
|
pci_read_config(dev, VR_PCI_MODE2, 1) |
|
|
VR_MODE2_MODE10T, 1);
|
|
/* Enable Memory-Read-Multiple. */
|
|
if (sc->vr_revid >= REV_ID_VT6107_A1 &&
|
|
sc->vr_revid < REV_ID_VT6105M_A0)
|
|
pci_write_config(dev, VR_PCI_MODE2,
|
|
pci_read_config(dev, VR_PCI_MODE2, 1) |
|
|
VR_MODE2_MRDPL, 1);
|
|
}
|
|
/* Disable MII AUTOPOLL. */
|
|
VR_CLRBIT(sc, VR_MIICMD, VR_MIICMD_AUTOPOLL);
|
|
|
|
if (vr_dma_alloc(sc) != 0) {
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
/* Do MII setup. */
|
|
if (sc->vr_revid >= REV_ID_VT6105_A0)
|
|
phy = 1;
|
|
else
|
|
phy = CSR_READ_1(sc, VR_PHYADDR) & VR_PHYADDR_MASK;
|
|
error = mii_attach(dev, &sc->vr_miibus, ifp, vr_ifmedia_upd,
|
|
vr_ifmedia_sts, BMSR_DEFCAPMASK, phy, MII_OFFSET_ANY,
|
|
sc->vr_revid >= REV_ID_VT6102_A ? MIIF_DOPAUSE : 0);
|
|
if (error != 0) {
|
|
device_printf(dev, "attaching PHYs failed\n");
|
|
goto fail;
|
|
}
|
|
|
|
/* Call MI attach routine. */
|
|
ether_ifattach(ifp, eaddr);
|
|
/*
|
|
* Tell the upper layer(s) we support long frames.
|
|
* Must appear after the call to ether_ifattach() because
|
|
* ether_ifattach() sets ifi_hdrlen to the default value.
|
|
*/
|
|
ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header);
|
|
|
|
/* Hook interrupt last to avoid having to lock softc. */
|
|
error = bus_setup_intr(dev, sc->vr_irq, INTR_TYPE_NET | INTR_MPSAFE,
|
|
NULL, vr_intr, sc, &sc->vr_intrhand);
|
|
|
|
if (error) {
|
|
device_printf(dev, "couldn't set up irq\n");
|
|
ether_ifdetach(ifp);
|
|
goto fail;
|
|
}
|
|
|
|
fail:
|
|
if (error)
|
|
vr_detach(dev);
|
|
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Shutdown hardware and free up resources. This can be called any
|
|
* time after the mutex has been initialized. It is called in both
|
|
* the error case in attach and the normal detach case so it needs
|
|
* to be careful about only freeing resources that have actually been
|
|
* allocated.
|
|
*/
|
|
static int
|
|
vr_detach(device_t dev)
|
|
{
|
|
struct vr_softc *sc = device_get_softc(dev);
|
|
struct ifnet *ifp = sc->vr_ifp;
|
|
|
|
KASSERT(mtx_initialized(&sc->vr_mtx), ("vr mutex not initialized"));
|
|
|
|
#ifdef DEVICE_POLLING
|
|
if (ifp != NULL && ifp->if_capenable & IFCAP_POLLING)
|
|
ether_poll_deregister(ifp);
|
|
#endif
|
|
|
|
/* These should only be active if attach succeeded. */
|
|
if (device_is_attached(dev)) {
|
|
VR_LOCK(sc);
|
|
sc->vr_flags |= VR_F_DETACHED;
|
|
vr_stop(sc);
|
|
VR_UNLOCK(sc);
|
|
callout_drain(&sc->vr_stat_callout);
|
|
ether_ifdetach(ifp);
|
|
}
|
|
if (sc->vr_miibus)
|
|
device_delete_child(dev, sc->vr_miibus);
|
|
bus_generic_detach(dev);
|
|
|
|
if (sc->vr_intrhand)
|
|
bus_teardown_intr(dev, sc->vr_irq, sc->vr_intrhand);
|
|
if (sc->vr_irq)
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->vr_irq);
|
|
if (sc->vr_res)
|
|
bus_release_resource(dev, sc->vr_res_type, sc->vr_res_id,
|
|
sc->vr_res);
|
|
|
|
if (ifp)
|
|
if_free(ifp);
|
|
|
|
vr_dma_free(sc);
|
|
|
|
mtx_destroy(&sc->vr_mtx);
|
|
|
|
return (0);
|
|
}
|
|
|
|
struct vr_dmamap_arg {
|
|
bus_addr_t vr_busaddr;
|
|
};
|
|
|
|
static void
|
|
vr_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error)
|
|
{
|
|
struct vr_dmamap_arg *ctx;
|
|
|
|
if (error != 0)
|
|
return;
|
|
ctx = arg;
|
|
ctx->vr_busaddr = segs[0].ds_addr;
|
|
}
|
|
|
|
static int
|
|
vr_dma_alloc(struct vr_softc *sc)
|
|
{
|
|
struct vr_dmamap_arg ctx;
|
|
struct vr_txdesc *txd;
|
|
struct vr_rxdesc *rxd;
|
|
bus_size_t tx_alignment;
|
|
int error, i;
|
|
|
|
/* Create parent DMA tag. */
|
|
error = bus_dma_tag_create(
|
|
bus_get_dma_tag(sc->vr_dev), /* parent */
|
|
1, 0, /* alignment, boundary */
|
|
BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
|
|
BUS_SPACE_MAXADDR, /* highaddr */
|
|
NULL, NULL, /* filter, filterarg */
|
|
BUS_SPACE_MAXSIZE_32BIT, /* maxsize */
|
|
0, /* nsegments */
|
|
BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */
|
|
0, /* flags */
|
|
NULL, NULL, /* lockfunc, lockarg */
|
|
&sc->vr_cdata.vr_parent_tag);
|
|
if (error != 0) {
|
|
device_printf(sc->vr_dev, "failed to create parent DMA tag\n");
|
|
goto fail;
|
|
}
|
|
/* Create tag for Tx ring. */
|
|
error = bus_dma_tag_create(
|
|
sc->vr_cdata.vr_parent_tag, /* parent */
|
|
VR_RING_ALIGN, 0, /* alignment, boundary */
|
|
BUS_SPACE_MAXADDR, /* lowaddr */
|
|
BUS_SPACE_MAXADDR, /* highaddr */
|
|
NULL, NULL, /* filter, filterarg */
|
|
VR_TX_RING_SIZE, /* maxsize */
|
|
1, /* nsegments */
|
|
VR_TX_RING_SIZE, /* maxsegsize */
|
|
0, /* flags */
|
|
NULL, NULL, /* lockfunc, lockarg */
|
|
&sc->vr_cdata.vr_tx_ring_tag);
|
|
if (error != 0) {
|
|
device_printf(sc->vr_dev, "failed to create Tx ring DMA tag\n");
|
|
goto fail;
|
|
}
|
|
|
|
/* Create tag for Rx ring. */
|
|
error = bus_dma_tag_create(
|
|
sc->vr_cdata.vr_parent_tag, /* parent */
|
|
VR_RING_ALIGN, 0, /* alignment, boundary */
|
|
BUS_SPACE_MAXADDR, /* lowaddr */
|
|
BUS_SPACE_MAXADDR, /* highaddr */
|
|
NULL, NULL, /* filter, filterarg */
|
|
VR_RX_RING_SIZE, /* maxsize */
|
|
1, /* nsegments */
|
|
VR_RX_RING_SIZE, /* maxsegsize */
|
|
0, /* flags */
|
|
NULL, NULL, /* lockfunc, lockarg */
|
|
&sc->vr_cdata.vr_rx_ring_tag);
|
|
if (error != 0) {
|
|
device_printf(sc->vr_dev, "failed to create Rx ring DMA tag\n");
|
|
goto fail;
|
|
}
|
|
|
|
if ((sc->vr_quirks & VR_Q_NEEDALIGN) != 0)
|
|
tx_alignment = sizeof(uint32_t);
|
|
else
|
|
tx_alignment = 1;
|
|
/* Create tag for Tx buffers. */
|
|
error = bus_dma_tag_create(
|
|
sc->vr_cdata.vr_parent_tag, /* parent */
|
|
tx_alignment, 0, /* alignment, boundary */
|
|
BUS_SPACE_MAXADDR, /* lowaddr */
|
|
BUS_SPACE_MAXADDR, /* highaddr */
|
|
NULL, NULL, /* filter, filterarg */
|
|
MCLBYTES * VR_MAXFRAGS, /* maxsize */
|
|
VR_MAXFRAGS, /* nsegments */
|
|
MCLBYTES, /* maxsegsize */
|
|
0, /* flags */
|
|
NULL, NULL, /* lockfunc, lockarg */
|
|
&sc->vr_cdata.vr_tx_tag);
|
|
if (error != 0) {
|
|
device_printf(sc->vr_dev, "failed to create Tx DMA tag\n");
|
|
goto fail;
|
|
}
|
|
|
|
/* Create tag for Rx buffers. */
|
|
error = bus_dma_tag_create(
|
|
sc->vr_cdata.vr_parent_tag, /* parent */
|
|
VR_RX_ALIGN, 0, /* alignment, boundary */
|
|
BUS_SPACE_MAXADDR, /* lowaddr */
|
|
BUS_SPACE_MAXADDR, /* highaddr */
|
|
NULL, NULL, /* filter, filterarg */
|
|
MCLBYTES, /* maxsize */
|
|
1, /* nsegments */
|
|
MCLBYTES, /* maxsegsize */
|
|
0, /* flags */
|
|
NULL, NULL, /* lockfunc, lockarg */
|
|
&sc->vr_cdata.vr_rx_tag);
|
|
if (error != 0) {
|
|
device_printf(sc->vr_dev, "failed to create Rx DMA tag\n");
|
|
goto fail;
|
|
}
|
|
|
|
/* Allocate DMA'able memory and load the DMA map for Tx ring. */
|
|
error = bus_dmamem_alloc(sc->vr_cdata.vr_tx_ring_tag,
|
|
(void **)&sc->vr_rdata.vr_tx_ring, BUS_DMA_WAITOK |
|
|
BUS_DMA_COHERENT | BUS_DMA_ZERO, &sc->vr_cdata.vr_tx_ring_map);
|
|
if (error != 0) {
|
|
device_printf(sc->vr_dev,
|
|
"failed to allocate DMA'able memory for Tx ring\n");
|
|
goto fail;
|
|
}
|
|
|
|
ctx.vr_busaddr = 0;
|
|
error = bus_dmamap_load(sc->vr_cdata.vr_tx_ring_tag,
|
|
sc->vr_cdata.vr_tx_ring_map, sc->vr_rdata.vr_tx_ring,
|
|
VR_TX_RING_SIZE, vr_dmamap_cb, &ctx, 0);
|
|
if (error != 0 || ctx.vr_busaddr == 0) {
|
|
device_printf(sc->vr_dev,
|
|
"failed to load DMA'able memory for Tx ring\n");
|
|
goto fail;
|
|
}
|
|
sc->vr_rdata.vr_tx_ring_paddr = ctx.vr_busaddr;
|
|
|
|
/* Allocate DMA'able memory and load the DMA map for Rx ring. */
|
|
error = bus_dmamem_alloc(sc->vr_cdata.vr_rx_ring_tag,
|
|
(void **)&sc->vr_rdata.vr_rx_ring, BUS_DMA_WAITOK |
|
|
BUS_DMA_COHERENT | BUS_DMA_ZERO, &sc->vr_cdata.vr_rx_ring_map);
|
|
if (error != 0) {
|
|
device_printf(sc->vr_dev,
|
|
"failed to allocate DMA'able memory for Rx ring\n");
|
|
goto fail;
|
|
}
|
|
|
|
ctx.vr_busaddr = 0;
|
|
error = bus_dmamap_load(sc->vr_cdata.vr_rx_ring_tag,
|
|
sc->vr_cdata.vr_rx_ring_map, sc->vr_rdata.vr_rx_ring,
|
|
VR_RX_RING_SIZE, vr_dmamap_cb, &ctx, 0);
|
|
if (error != 0 || ctx.vr_busaddr == 0) {
|
|
device_printf(sc->vr_dev,
|
|
"failed to load DMA'able memory for Rx ring\n");
|
|
goto fail;
|
|
}
|
|
sc->vr_rdata.vr_rx_ring_paddr = ctx.vr_busaddr;
|
|
|
|
/* Create DMA maps for Tx buffers. */
|
|
for (i = 0; i < VR_TX_RING_CNT; i++) {
|
|
txd = &sc->vr_cdata.vr_txdesc[i];
|
|
txd->tx_m = NULL;
|
|
txd->tx_dmamap = NULL;
|
|
error = bus_dmamap_create(sc->vr_cdata.vr_tx_tag, 0,
|
|
&txd->tx_dmamap);
|
|
if (error != 0) {
|
|
device_printf(sc->vr_dev,
|
|
"failed to create Tx dmamap\n");
|
|
goto fail;
|
|
}
|
|
}
|
|
/* Create DMA maps for Rx buffers. */
|
|
if ((error = bus_dmamap_create(sc->vr_cdata.vr_rx_tag, 0,
|
|
&sc->vr_cdata.vr_rx_sparemap)) != 0) {
|
|
device_printf(sc->vr_dev,
|
|
"failed to create spare Rx dmamap\n");
|
|
goto fail;
|
|
}
|
|
for (i = 0; i < VR_RX_RING_CNT; i++) {
|
|
rxd = &sc->vr_cdata.vr_rxdesc[i];
|
|
rxd->rx_m = NULL;
|
|
rxd->rx_dmamap = NULL;
|
|
error = bus_dmamap_create(sc->vr_cdata.vr_rx_tag, 0,
|
|
&rxd->rx_dmamap);
|
|
if (error != 0) {
|
|
device_printf(sc->vr_dev,
|
|
"failed to create Rx dmamap\n");
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
vr_dma_free(struct vr_softc *sc)
|
|
{
|
|
struct vr_txdesc *txd;
|
|
struct vr_rxdesc *rxd;
|
|
int i;
|
|
|
|
/* Tx ring. */
|
|
if (sc->vr_cdata.vr_tx_ring_tag) {
|
|
if (sc->vr_cdata.vr_tx_ring_map)
|
|
bus_dmamap_unload(sc->vr_cdata.vr_tx_ring_tag,
|
|
sc->vr_cdata.vr_tx_ring_map);
|
|
if (sc->vr_cdata.vr_tx_ring_map &&
|
|
sc->vr_rdata.vr_tx_ring)
|
|
bus_dmamem_free(sc->vr_cdata.vr_tx_ring_tag,
|
|
sc->vr_rdata.vr_tx_ring,
|
|
sc->vr_cdata.vr_tx_ring_map);
|
|
sc->vr_rdata.vr_tx_ring = NULL;
|
|
sc->vr_cdata.vr_tx_ring_map = NULL;
|
|
bus_dma_tag_destroy(sc->vr_cdata.vr_tx_ring_tag);
|
|
sc->vr_cdata.vr_tx_ring_tag = NULL;
|
|
}
|
|
/* Rx ring. */
|
|
if (sc->vr_cdata.vr_rx_ring_tag) {
|
|
if (sc->vr_cdata.vr_rx_ring_map)
|
|
bus_dmamap_unload(sc->vr_cdata.vr_rx_ring_tag,
|
|
sc->vr_cdata.vr_rx_ring_map);
|
|
if (sc->vr_cdata.vr_rx_ring_map &&
|
|
sc->vr_rdata.vr_rx_ring)
|
|
bus_dmamem_free(sc->vr_cdata.vr_rx_ring_tag,
|
|
sc->vr_rdata.vr_rx_ring,
|
|
sc->vr_cdata.vr_rx_ring_map);
|
|
sc->vr_rdata.vr_rx_ring = NULL;
|
|
sc->vr_cdata.vr_rx_ring_map = NULL;
|
|
bus_dma_tag_destroy(sc->vr_cdata.vr_rx_ring_tag);
|
|
sc->vr_cdata.vr_rx_ring_tag = NULL;
|
|
}
|
|
/* Tx buffers. */
|
|
if (sc->vr_cdata.vr_tx_tag) {
|
|
for (i = 0; i < VR_TX_RING_CNT; i++) {
|
|
txd = &sc->vr_cdata.vr_txdesc[i];
|
|
if (txd->tx_dmamap) {
|
|
bus_dmamap_destroy(sc->vr_cdata.vr_tx_tag,
|
|
txd->tx_dmamap);
|
|
txd->tx_dmamap = NULL;
|
|
}
|
|
}
|
|
bus_dma_tag_destroy(sc->vr_cdata.vr_tx_tag);
|
|
sc->vr_cdata.vr_tx_tag = NULL;
|
|
}
|
|
/* Rx buffers. */
|
|
if (sc->vr_cdata.vr_rx_tag) {
|
|
for (i = 0; i < VR_RX_RING_CNT; i++) {
|
|
rxd = &sc->vr_cdata.vr_rxdesc[i];
|
|
if (rxd->rx_dmamap) {
|
|
bus_dmamap_destroy(sc->vr_cdata.vr_rx_tag,
|
|
rxd->rx_dmamap);
|
|
rxd->rx_dmamap = NULL;
|
|
}
|
|
}
|
|
if (sc->vr_cdata.vr_rx_sparemap) {
|
|
bus_dmamap_destroy(sc->vr_cdata.vr_rx_tag,
|
|
sc->vr_cdata.vr_rx_sparemap);
|
|
sc->vr_cdata.vr_rx_sparemap = 0;
|
|
}
|
|
bus_dma_tag_destroy(sc->vr_cdata.vr_rx_tag);
|
|
sc->vr_cdata.vr_rx_tag = NULL;
|
|
}
|
|
|
|
if (sc->vr_cdata.vr_parent_tag) {
|
|
bus_dma_tag_destroy(sc->vr_cdata.vr_parent_tag);
|
|
sc->vr_cdata.vr_parent_tag = NULL;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Initialize the transmit descriptors.
|
|
*/
|
|
static int
|
|
vr_tx_ring_init(struct vr_softc *sc)
|
|
{
|
|
struct vr_ring_data *rd;
|
|
struct vr_txdesc *txd;
|
|
bus_addr_t addr;
|
|
int i;
|
|
|
|
sc->vr_cdata.vr_tx_prod = 0;
|
|
sc->vr_cdata.vr_tx_cons = 0;
|
|
sc->vr_cdata.vr_tx_cnt = 0;
|
|
sc->vr_cdata.vr_tx_pkts = 0;
|
|
|
|
rd = &sc->vr_rdata;
|
|
bzero(rd->vr_tx_ring, VR_TX_RING_SIZE);
|
|
for (i = 0; i < VR_TX_RING_CNT; i++) {
|
|
if (i == VR_TX_RING_CNT - 1)
|
|
addr = VR_TX_RING_ADDR(sc, 0);
|
|
else
|
|
addr = VR_TX_RING_ADDR(sc, i + 1);
|
|
rd->vr_tx_ring[i].vr_nextphys = htole32(VR_ADDR_LO(addr));
|
|
txd = &sc->vr_cdata.vr_txdesc[i];
|
|
txd->tx_m = NULL;
|
|
}
|
|
|
|
bus_dmamap_sync(sc->vr_cdata.vr_tx_ring_tag,
|
|
sc->vr_cdata.vr_tx_ring_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Initialize the RX descriptors and allocate mbufs for them. Note that
|
|
* we arrange the descriptors in a closed ring, so that the last descriptor
|
|
* points back to the first.
|
|
*/
|
|
static int
|
|
vr_rx_ring_init(struct vr_softc *sc)
|
|
{
|
|
struct vr_ring_data *rd;
|
|
struct vr_rxdesc *rxd;
|
|
bus_addr_t addr;
|
|
int i;
|
|
|
|
sc->vr_cdata.vr_rx_cons = 0;
|
|
|
|
rd = &sc->vr_rdata;
|
|
bzero(rd->vr_rx_ring, VR_RX_RING_SIZE);
|
|
for (i = 0; i < VR_RX_RING_CNT; i++) {
|
|
rxd = &sc->vr_cdata.vr_rxdesc[i];
|
|
rxd->rx_m = NULL;
|
|
rxd->desc = &rd->vr_rx_ring[i];
|
|
if (i == VR_RX_RING_CNT - 1)
|
|
addr = VR_RX_RING_ADDR(sc, 0);
|
|
else
|
|
addr = VR_RX_RING_ADDR(sc, i + 1);
|
|
rd->vr_rx_ring[i].vr_nextphys = htole32(VR_ADDR_LO(addr));
|
|
if (vr_newbuf(sc, i) != 0)
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
bus_dmamap_sync(sc->vr_cdata.vr_rx_ring_tag,
|
|
sc->vr_cdata.vr_rx_ring_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static __inline void
|
|
vr_discard_rxbuf(struct vr_rxdesc *rxd)
|
|
{
|
|
struct vr_desc *desc;
|
|
|
|
desc = rxd->desc;
|
|
desc->vr_ctl = htole32(VR_RXCTL | (MCLBYTES - sizeof(uint64_t)));
|
|
desc->vr_status = htole32(VR_RXSTAT_OWN);
|
|
}
|
|
|
|
/*
|
|
* Initialize an RX descriptor and attach an MBUF cluster.
|
|
* Note: the length fields are only 11 bits wide, which means the
|
|
* largest size we can specify is 2047. This is important because
|
|
* MCLBYTES is 2048, so we have to subtract one otherwise we'll
|
|
* overflow the field and make a mess.
|
|
*/
|
|
static int
|
|
vr_newbuf(struct vr_softc *sc, int idx)
|
|
{
|
|
struct vr_desc *desc;
|
|
struct vr_rxdesc *rxd;
|
|
struct mbuf *m;
|
|
bus_dma_segment_t segs[1];
|
|
bus_dmamap_t map;
|
|
int nsegs;
|
|
|
|
m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
|
|
if (m == NULL)
|
|
return (ENOBUFS);
|
|
m->m_len = m->m_pkthdr.len = MCLBYTES;
|
|
m_adj(m, sizeof(uint64_t));
|
|
|
|
if (bus_dmamap_load_mbuf_sg(sc->vr_cdata.vr_rx_tag,
|
|
sc->vr_cdata.vr_rx_sparemap, m, segs, &nsegs, 0) != 0) {
|
|
m_freem(m);
|
|
return (ENOBUFS);
|
|
}
|
|
KASSERT(nsegs == 1, ("%s: %d segments returned!", __func__, nsegs));
|
|
|
|
rxd = &sc->vr_cdata.vr_rxdesc[idx];
|
|
if (rxd->rx_m != NULL) {
|
|
bus_dmamap_sync(sc->vr_cdata.vr_rx_tag, rxd->rx_dmamap,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(sc->vr_cdata.vr_rx_tag, rxd->rx_dmamap);
|
|
}
|
|
map = rxd->rx_dmamap;
|
|
rxd->rx_dmamap = sc->vr_cdata.vr_rx_sparemap;
|
|
sc->vr_cdata.vr_rx_sparemap = map;
|
|
bus_dmamap_sync(sc->vr_cdata.vr_rx_tag, rxd->rx_dmamap,
|
|
BUS_DMASYNC_PREREAD);
|
|
rxd->rx_m = m;
|
|
desc = rxd->desc;
|
|
desc->vr_data = htole32(VR_ADDR_LO(segs[0].ds_addr));
|
|
desc->vr_ctl = htole32(VR_RXCTL | segs[0].ds_len);
|
|
desc->vr_status = htole32(VR_RXSTAT_OWN);
|
|
|
|
return (0);
|
|
}
|
|
|
|
#ifndef __NO_STRICT_ALIGNMENT
|
|
static __inline void
|
|
vr_fixup_rx(struct mbuf *m)
|
|
{
|
|
uint16_t *src, *dst;
|
|
int i;
|
|
|
|
src = mtod(m, uint16_t *);
|
|
dst = src - 1;
|
|
|
|
for (i = 0; i < (m->m_len / sizeof(uint16_t) + 1); i++)
|
|
*dst++ = *src++;
|
|
|
|
m->m_data -= ETHER_ALIGN;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* A frame has been uploaded: pass the resulting mbuf chain up to
|
|
* the higher level protocols.
|
|
*/
|
|
static int
|
|
vr_rxeof(struct vr_softc *sc)
|
|
{
|
|
struct vr_rxdesc *rxd;
|
|
struct mbuf *m;
|
|
struct ifnet *ifp;
|
|
struct vr_desc *cur_rx;
|
|
int cons, prog, total_len, rx_npkts;
|
|
uint32_t rxstat, rxctl;
|
|
|
|
VR_LOCK_ASSERT(sc);
|
|
ifp = sc->vr_ifp;
|
|
cons = sc->vr_cdata.vr_rx_cons;
|
|
rx_npkts = 0;
|
|
|
|
bus_dmamap_sync(sc->vr_cdata.vr_rx_ring_tag,
|
|
sc->vr_cdata.vr_rx_ring_map,
|
|
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
|
|
|
|
for (prog = 0; prog < VR_RX_RING_CNT; VR_INC(cons, VR_RX_RING_CNT)) {
|
|
#ifdef DEVICE_POLLING
|
|
if (ifp->if_capenable & IFCAP_POLLING) {
|
|
if (sc->rxcycles <= 0)
|
|
break;
|
|
sc->rxcycles--;
|
|
}
|
|
#endif
|
|
cur_rx = &sc->vr_rdata.vr_rx_ring[cons];
|
|
rxstat = le32toh(cur_rx->vr_status);
|
|
rxctl = le32toh(cur_rx->vr_ctl);
|
|
if ((rxstat & VR_RXSTAT_OWN) == VR_RXSTAT_OWN)
|
|
break;
|
|
|
|
prog++;
|
|
rxd = &sc->vr_cdata.vr_rxdesc[cons];
|
|
m = rxd->rx_m;
|
|
|
|
/*
|
|
* If an error occurs, update stats, clear the
|
|
* status word and leave the mbuf cluster in place:
|
|
* it should simply get re-used next time this descriptor
|
|
* comes up in the ring.
|
|
* We don't support SG in Rx path yet, so discard
|
|
* partial frame.
|
|
*/
|
|
if ((rxstat & VR_RXSTAT_RX_OK) == 0 ||
|
|
(rxstat & (VR_RXSTAT_FIRSTFRAG | VR_RXSTAT_LASTFRAG)) !=
|
|
(VR_RXSTAT_FIRSTFRAG | VR_RXSTAT_LASTFRAG)) {
|
|
ifp->if_ierrors++;
|
|
sc->vr_stat.rx_errors++;
|
|
if (rxstat & VR_RXSTAT_CRCERR)
|
|
sc->vr_stat.rx_crc_errors++;
|
|
if (rxstat & VR_RXSTAT_FRAMEALIGNERR)
|
|
sc->vr_stat.rx_alignment++;
|
|
if (rxstat & VR_RXSTAT_FIFOOFLOW)
|
|
sc->vr_stat.rx_fifo_overflows++;
|
|
if (rxstat & VR_RXSTAT_GIANT)
|
|
sc->vr_stat.rx_giants++;
|
|
if (rxstat & VR_RXSTAT_RUNT)
|
|
sc->vr_stat.rx_runts++;
|
|
if (rxstat & VR_RXSTAT_BUFFERR)
|
|
sc->vr_stat.rx_no_buffers++;
|
|
#ifdef VR_SHOW_ERRORS
|
|
device_printf(sc->vr_dev, "%s: receive error = 0x%b\n",
|
|
__func__, rxstat & 0xff, VR_RXSTAT_ERR_BITS);
|
|
#endif
|
|
vr_discard_rxbuf(rxd);
|
|
continue;
|
|
}
|
|
|
|
if (vr_newbuf(sc, cons) != 0) {
|
|
ifp->if_iqdrops++;
|
|
sc->vr_stat.rx_errors++;
|
|
sc->vr_stat.rx_no_mbufs++;
|
|
vr_discard_rxbuf(rxd);
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* XXX The VIA Rhine chip includes the CRC with every
|
|
* received frame, and there's no way to turn this
|
|
* behavior off (at least, I can't find anything in
|
|
* the manual that explains how to do it) so we have
|
|
* to trim off the CRC manually.
|
|
*/
|
|
total_len = VR_RXBYTES(rxstat);
|
|
total_len -= ETHER_CRC_LEN;
|
|
m->m_pkthdr.len = m->m_len = total_len;
|
|
#ifndef __NO_STRICT_ALIGNMENT
|
|
/*
|
|
* RX buffers must be 32-bit aligned.
|
|
* Ignore the alignment problems on the non-strict alignment
|
|
* platform. The performance hit incurred due to unaligned
|
|
* accesses is much smaller than the hit produced by forcing
|
|
* buffer copies all the time.
|
|
*/
|
|
vr_fixup_rx(m);
|
|
#endif
|
|
m->m_pkthdr.rcvif = ifp;
|
|
ifp->if_ipackets++;
|
|
sc->vr_stat.rx_ok++;
|
|
if ((ifp->if_capenable & IFCAP_RXCSUM) != 0 &&
|
|
(rxstat & VR_RXSTAT_FRAG) == 0 &&
|
|
(rxctl & VR_RXCTL_IP) != 0) {
|
|
/* Checksum is valid for non-fragmented IP packets. */
|
|
m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED;
|
|
if ((rxctl & VR_RXCTL_IPOK) == VR_RXCTL_IPOK) {
|
|
m->m_pkthdr.csum_flags |= CSUM_IP_VALID;
|
|
if (rxctl & (VR_RXCTL_TCP | VR_RXCTL_UDP)) {
|
|
m->m_pkthdr.csum_flags |=
|
|
CSUM_DATA_VALID | CSUM_PSEUDO_HDR;
|
|
if ((rxctl & VR_RXCTL_TCPUDPOK) != 0)
|
|
m->m_pkthdr.csum_data = 0xffff;
|
|
}
|
|
}
|
|
}
|
|
VR_UNLOCK(sc);
|
|
(*ifp->if_input)(ifp, m);
|
|
VR_LOCK(sc);
|
|
rx_npkts++;
|
|
}
|
|
|
|
if (prog > 0) {
|
|
/*
|
|
* Let controller know how many number of RX buffers
|
|
* are posted but avoid expensive register access if
|
|
* TX pause capability was not negotiated with link
|
|
* partner.
|
|
*/
|
|
if ((sc->vr_flags & VR_F_TXPAUSE) != 0) {
|
|
if (prog >= VR_RX_RING_CNT)
|
|
prog = VR_RX_RING_CNT - 1;
|
|
CSR_WRITE_1(sc, VR_FLOWCR0, prog);
|
|
}
|
|
sc->vr_cdata.vr_rx_cons = cons;
|
|
bus_dmamap_sync(sc->vr_cdata.vr_rx_ring_tag,
|
|
sc->vr_cdata.vr_rx_ring_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
}
|
|
return (rx_npkts);
|
|
}
|
|
|
|
/*
|
|
* A frame was downloaded to the chip. It's safe for us to clean up
|
|
* the list buffers.
|
|
*/
|
|
static void
|
|
vr_txeof(struct vr_softc *sc)
|
|
{
|
|
struct vr_txdesc *txd;
|
|
struct vr_desc *cur_tx;
|
|
struct ifnet *ifp;
|
|
uint32_t txctl, txstat;
|
|
int cons, prod;
|
|
|
|
VR_LOCK_ASSERT(sc);
|
|
|
|
cons = sc->vr_cdata.vr_tx_cons;
|
|
prod = sc->vr_cdata.vr_tx_prod;
|
|
if (cons == prod)
|
|
return;
|
|
|
|
bus_dmamap_sync(sc->vr_cdata.vr_tx_ring_tag,
|
|
sc->vr_cdata.vr_tx_ring_map,
|
|
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
|
|
|
|
ifp = sc->vr_ifp;
|
|
/*
|
|
* Go through our tx list and free mbufs for those
|
|
* frames that have been transmitted.
|
|
*/
|
|
for (; cons != prod; VR_INC(cons, VR_TX_RING_CNT)) {
|
|
cur_tx = &sc->vr_rdata.vr_tx_ring[cons];
|
|
txctl = le32toh(cur_tx->vr_ctl);
|
|
txstat = le32toh(cur_tx->vr_status);
|
|
if ((txstat & VR_TXSTAT_OWN) == VR_TXSTAT_OWN)
|
|
break;
|
|
|
|
sc->vr_cdata.vr_tx_cnt--;
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
/* Only the first descriptor in the chain is valid. */
|
|
if ((txctl & VR_TXCTL_FIRSTFRAG) == 0)
|
|
continue;
|
|
|
|
txd = &sc->vr_cdata.vr_txdesc[cons];
|
|
KASSERT(txd->tx_m != NULL, ("%s: accessing NULL mbuf!\n",
|
|
__func__));
|
|
|
|
if ((txstat & VR_TXSTAT_ERRSUM) != 0) {
|
|
ifp->if_oerrors++;
|
|
sc->vr_stat.tx_errors++;
|
|
if ((txstat & VR_TXSTAT_ABRT) != 0) {
|
|
/* Give up and restart Tx. */
|
|
sc->vr_stat.tx_abort++;
|
|
bus_dmamap_sync(sc->vr_cdata.vr_tx_tag,
|
|
txd->tx_dmamap, BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(sc->vr_cdata.vr_tx_tag,
|
|
txd->tx_dmamap);
|
|
m_freem(txd->tx_m);
|
|
txd->tx_m = NULL;
|
|
VR_INC(cons, VR_TX_RING_CNT);
|
|
sc->vr_cdata.vr_tx_cons = cons;
|
|
if (vr_tx_stop(sc) != 0) {
|
|
device_printf(sc->vr_dev,
|
|
"%s: Tx shutdown error -- "
|
|
"resetting\n", __func__);
|
|
sc->vr_flags |= VR_F_RESTART;
|
|
return;
|
|
}
|
|
vr_tx_start(sc);
|
|
break;
|
|
}
|
|
if ((sc->vr_revid < REV_ID_VT3071_A &&
|
|
(txstat & VR_TXSTAT_UNDERRUN)) ||
|
|
(txstat & (VR_TXSTAT_UDF | VR_TXSTAT_TBUFF))) {
|
|
sc->vr_stat.tx_underrun++;
|
|
/* Retry and restart Tx. */
|
|
sc->vr_cdata.vr_tx_cnt++;
|
|
sc->vr_cdata.vr_tx_cons = cons;
|
|
cur_tx->vr_status = htole32(VR_TXSTAT_OWN);
|
|
bus_dmamap_sync(sc->vr_cdata.vr_tx_ring_tag,
|
|
sc->vr_cdata.vr_tx_ring_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
vr_tx_underrun(sc);
|
|
return;
|
|
}
|
|
if ((txstat & VR_TXSTAT_DEFER) != 0) {
|
|
ifp->if_collisions++;
|
|
sc->vr_stat.tx_collisions++;
|
|
}
|
|
if ((txstat & VR_TXSTAT_LATECOLL) != 0) {
|
|
ifp->if_collisions++;
|
|
sc->vr_stat.tx_late_collisions++;
|
|
}
|
|
} else {
|
|
sc->vr_stat.tx_ok++;
|
|
ifp->if_opackets++;
|
|
}
|
|
|
|
bus_dmamap_sync(sc->vr_cdata.vr_tx_tag, txd->tx_dmamap,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(sc->vr_cdata.vr_tx_tag, txd->tx_dmamap);
|
|
if (sc->vr_revid < REV_ID_VT3071_A) {
|
|
ifp->if_collisions +=
|
|
(txstat & VR_TXSTAT_COLLCNT) >> 3;
|
|
sc->vr_stat.tx_collisions +=
|
|
(txstat & VR_TXSTAT_COLLCNT) >> 3;
|
|
} else {
|
|
ifp->if_collisions += (txstat & 0x0f);
|
|
sc->vr_stat.tx_collisions += (txstat & 0x0f);
|
|
}
|
|
m_freem(txd->tx_m);
|
|
txd->tx_m = NULL;
|
|
}
|
|
|
|
sc->vr_cdata.vr_tx_cons = cons;
|
|
if (sc->vr_cdata.vr_tx_cnt == 0)
|
|
sc->vr_watchdog_timer = 0;
|
|
}
|
|
|
|
static void
|
|
vr_tick(void *xsc)
|
|
{
|
|
struct vr_softc *sc;
|
|
struct mii_data *mii;
|
|
|
|
sc = (struct vr_softc *)xsc;
|
|
|
|
VR_LOCK_ASSERT(sc);
|
|
|
|
if ((sc->vr_flags & VR_F_RESTART) != 0) {
|
|
device_printf(sc->vr_dev, "restarting\n");
|
|
sc->vr_stat.num_restart++;
|
|
sc->vr_ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
vr_init_locked(sc);
|
|
sc->vr_flags &= ~VR_F_RESTART;
|
|
}
|
|
|
|
mii = device_get_softc(sc->vr_miibus);
|
|
mii_tick(mii);
|
|
if ((sc->vr_flags & VR_F_LINK) == 0)
|
|
vr_miibus_statchg(sc->vr_dev);
|
|
vr_watchdog(sc);
|
|
callout_reset(&sc->vr_stat_callout, hz, vr_tick, sc);
|
|
}
|
|
|
|
#ifdef DEVICE_POLLING
|
|
static poll_handler_t vr_poll;
|
|
static poll_handler_t vr_poll_locked;
|
|
|
|
static int
|
|
vr_poll(struct ifnet *ifp, enum poll_cmd cmd, int count)
|
|
{
|
|
struct vr_softc *sc;
|
|
int rx_npkts;
|
|
|
|
sc = ifp->if_softc;
|
|
rx_npkts = 0;
|
|
|
|
VR_LOCK(sc);
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0)
|
|
rx_npkts = vr_poll_locked(ifp, cmd, count);
|
|
VR_UNLOCK(sc);
|
|
return (rx_npkts);
|
|
}
|
|
|
|
static int
|
|
vr_poll_locked(struct ifnet *ifp, enum poll_cmd cmd, int count)
|
|
{
|
|
struct vr_softc *sc;
|
|
int rx_npkts;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
VR_LOCK_ASSERT(sc);
|
|
|
|
sc->rxcycles = count;
|
|
rx_npkts = vr_rxeof(sc);
|
|
vr_txeof(sc);
|
|
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
|
|
vr_start_locked(ifp);
|
|
|
|
if (cmd == POLL_AND_CHECK_STATUS) {
|
|
uint16_t status;
|
|
|
|
/* Also check status register. */
|
|
status = CSR_READ_2(sc, VR_ISR);
|
|
if (status)
|
|
CSR_WRITE_2(sc, VR_ISR, status);
|
|
|
|
if ((status & VR_INTRS) == 0)
|
|
return (rx_npkts);
|
|
|
|
if ((status & (VR_ISR_BUSERR | VR_ISR_LINKSTAT2 |
|
|
VR_ISR_STATSOFLOW)) != 0) {
|
|
if (vr_error(sc, status) != 0)
|
|
return (rx_npkts);
|
|
}
|
|
if ((status & (VR_ISR_RX_NOBUF | VR_ISR_RX_OFLOW)) != 0) {
|
|
#ifdef VR_SHOW_ERRORS
|
|
device_printf(sc->vr_dev, "%s: receive error : 0x%b\n",
|
|
__func__, status, VR_ISR_ERR_BITS);
|
|
#endif
|
|
vr_rx_start(sc);
|
|
}
|
|
}
|
|
return (rx_npkts);
|
|
}
|
|
#endif /* DEVICE_POLLING */
|
|
|
|
/* Back off the transmit threshold. */
|
|
static void
|
|
vr_tx_underrun(struct vr_softc *sc)
|
|
{
|
|
int thresh;
|
|
|
|
device_printf(sc->vr_dev, "Tx underrun -- ");
|
|
if (sc->vr_txthresh < VR_TXTHRESH_MAX) {
|
|
thresh = sc->vr_txthresh;
|
|
sc->vr_txthresh++;
|
|
if (sc->vr_txthresh >= VR_TXTHRESH_MAX) {
|
|
sc->vr_txthresh = VR_TXTHRESH_MAX;
|
|
printf("using store and forward mode\n");
|
|
} else
|
|
printf("increasing Tx threshold(%d -> %d)\n",
|
|
vr_tx_threshold_tables[thresh].value,
|
|
vr_tx_threshold_tables[thresh + 1].value);
|
|
} else
|
|
printf("\n");
|
|
sc->vr_stat.tx_underrun++;
|
|
if (vr_tx_stop(sc) != 0) {
|
|
device_printf(sc->vr_dev, "%s: Tx shutdown error -- "
|
|
"resetting\n", __func__);
|
|
sc->vr_flags |= VR_F_RESTART;
|
|
return;
|
|
}
|
|
vr_tx_start(sc);
|
|
}
|
|
|
|
static void
|
|
vr_intr(void *arg)
|
|
{
|
|
struct vr_softc *sc;
|
|
struct ifnet *ifp;
|
|
uint16_t status;
|
|
|
|
sc = (struct vr_softc *)arg;
|
|
|
|
VR_LOCK(sc);
|
|
|
|
if ((sc->vr_flags & VR_F_SUSPENDED) != 0)
|
|
goto done_locked;
|
|
|
|
status = CSR_READ_2(sc, VR_ISR);
|
|
if (status == 0 || status == 0xffff || (status & VR_INTRS) == 0)
|
|
goto done_locked;
|
|
|
|
ifp = sc->vr_ifp;
|
|
#ifdef DEVICE_POLLING
|
|
if ((ifp->if_capenable & IFCAP_POLLING) != 0)
|
|
goto done_locked;
|
|
#endif
|
|
|
|
/* Suppress unwanted interrupts. */
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0 ||
|
|
(sc->vr_flags & VR_F_RESTART) != 0) {
|
|
CSR_WRITE_2(sc, VR_IMR, 0);
|
|
CSR_WRITE_2(sc, VR_ISR, status);
|
|
goto done_locked;
|
|
}
|
|
|
|
/* Disable interrupts. */
|
|
CSR_WRITE_2(sc, VR_IMR, 0x0000);
|
|
|
|
for (; (status & VR_INTRS) != 0;) {
|
|
CSR_WRITE_2(sc, VR_ISR, status);
|
|
if ((status & (VR_ISR_BUSERR | VR_ISR_LINKSTAT2 |
|
|
VR_ISR_STATSOFLOW)) != 0) {
|
|
if (vr_error(sc, status) != 0) {
|
|
VR_UNLOCK(sc);
|
|
return;
|
|
}
|
|
}
|
|
vr_rxeof(sc);
|
|
if ((status & (VR_ISR_RX_NOBUF | VR_ISR_RX_OFLOW)) != 0) {
|
|
#ifdef VR_SHOW_ERRORS
|
|
device_printf(sc->vr_dev, "%s: receive error = 0x%b\n",
|
|
__func__, status, VR_ISR_ERR_BITS);
|
|
#endif
|
|
/* Restart Rx if RxDMA SM was stopped. */
|
|
vr_rx_start(sc);
|
|
}
|
|
vr_txeof(sc);
|
|
status = CSR_READ_2(sc, VR_ISR);
|
|
}
|
|
|
|
/* Re-enable interrupts. */
|
|
CSR_WRITE_2(sc, VR_IMR, VR_INTRS);
|
|
|
|
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
|
|
vr_start_locked(ifp);
|
|
|
|
done_locked:
|
|
VR_UNLOCK(sc);
|
|
}
|
|
|
|
static int
|
|
vr_error(struct vr_softc *sc, uint16_t status)
|
|
{
|
|
uint16_t pcis;
|
|
|
|
status &= VR_ISR_BUSERR | VR_ISR_LINKSTAT2 | VR_ISR_STATSOFLOW;
|
|
if ((status & VR_ISR_BUSERR) != 0) {
|
|
status &= ~VR_ISR_BUSERR;
|
|
sc->vr_stat.bus_errors++;
|
|
/* Disable further interrupts. */
|
|
CSR_WRITE_2(sc, VR_IMR, 0);
|
|
pcis = pci_read_config(sc->vr_dev, PCIR_STATUS, 2);
|
|
device_printf(sc->vr_dev, "PCI bus error(0x%04x) -- "
|
|
"resetting\n", pcis);
|
|
pci_write_config(sc->vr_dev, PCIR_STATUS, pcis, 2);
|
|
sc->vr_flags |= VR_F_RESTART;
|
|
return (EAGAIN);
|
|
}
|
|
if ((status & VR_ISR_LINKSTAT2) != 0) {
|
|
/* Link state change, duplex changes etc. */
|
|
status &= ~VR_ISR_LINKSTAT2;
|
|
}
|
|
if ((status & VR_ISR_STATSOFLOW) != 0) {
|
|
status &= ~VR_ISR_STATSOFLOW;
|
|
if (sc->vr_revid >= REV_ID_VT6105M_A0) {
|
|
/* Update MIB counters. */
|
|
}
|
|
}
|
|
|
|
if (status != 0)
|
|
device_printf(sc->vr_dev,
|
|
"unhandled interrupt, status = 0x%04x\n", status);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Encapsulate an mbuf chain in a descriptor by coupling the mbuf data
|
|
* pointers to the fragment pointers.
|
|
*/
|
|
static int
|
|
vr_encap(struct vr_softc *sc, struct mbuf **m_head)
|
|
{
|
|
struct vr_txdesc *txd;
|
|
struct vr_desc *desc;
|
|
struct mbuf *m;
|
|
bus_dma_segment_t txsegs[VR_MAXFRAGS];
|
|
uint32_t csum_flags, txctl;
|
|
int error, i, nsegs, prod, si;
|
|
int padlen;
|
|
|
|
VR_LOCK_ASSERT(sc);
|
|
|
|
M_ASSERTPKTHDR((*m_head));
|
|
|
|
/*
|
|
* Some VIA Rhine wants packet buffers to be longword
|
|
* aligned, but very often our mbufs aren't. Rather than
|
|
* waste time trying to decide when to copy and when not
|
|
* to copy, just do it all the time.
|
|
*/
|
|
if ((sc->vr_quirks & VR_Q_NEEDALIGN) != 0) {
|
|
m = m_defrag(*m_head, M_DONTWAIT);
|
|
if (m == NULL) {
|
|
m_freem(*m_head);
|
|
*m_head = NULL;
|
|
return (ENOBUFS);
|
|
}
|
|
*m_head = m;
|
|
}
|
|
|
|
/*
|
|
* The Rhine chip doesn't auto-pad, so we have to make
|
|
* sure to pad short frames out to the minimum frame length
|
|
* ourselves.
|
|
*/
|
|
if ((*m_head)->m_pkthdr.len < VR_MIN_FRAMELEN) {
|
|
m = *m_head;
|
|
padlen = VR_MIN_FRAMELEN - m->m_pkthdr.len;
|
|
if (M_WRITABLE(m) == 0) {
|
|
/* Get a writable copy. */
|
|
m = m_dup(*m_head, M_DONTWAIT);
|
|
m_freem(*m_head);
|
|
if (m == NULL) {
|
|
*m_head = NULL;
|
|
return (ENOBUFS);
|
|
}
|
|
*m_head = m;
|
|
}
|
|
if (m->m_next != NULL || M_TRAILINGSPACE(m) < padlen) {
|
|
m = m_defrag(m, M_DONTWAIT);
|
|
if (m == NULL) {
|
|
m_freem(*m_head);
|
|
*m_head = NULL;
|
|
return (ENOBUFS);
|
|
}
|
|
}
|
|
/*
|
|
* Manually pad short frames, and zero the pad space
|
|
* to avoid leaking data.
|
|
*/
|
|
bzero(mtod(m, char *) + m->m_pkthdr.len, padlen);
|
|
m->m_pkthdr.len += padlen;
|
|
m->m_len = m->m_pkthdr.len;
|
|
*m_head = m;
|
|
}
|
|
|
|
prod = sc->vr_cdata.vr_tx_prod;
|
|
txd = &sc->vr_cdata.vr_txdesc[prod];
|
|
error = bus_dmamap_load_mbuf_sg(sc->vr_cdata.vr_tx_tag, txd->tx_dmamap,
|
|
*m_head, txsegs, &nsegs, BUS_DMA_NOWAIT);
|
|
if (error == EFBIG) {
|
|
m = m_collapse(*m_head, M_DONTWAIT, VR_MAXFRAGS);
|
|
if (m == NULL) {
|
|
m_freem(*m_head);
|
|
*m_head = NULL;
|
|
return (ENOBUFS);
|
|
}
|
|
*m_head = m;
|
|
error = bus_dmamap_load_mbuf_sg(sc->vr_cdata.vr_tx_tag,
|
|
txd->tx_dmamap, *m_head, txsegs, &nsegs, BUS_DMA_NOWAIT);
|
|
if (error != 0) {
|
|
m_freem(*m_head);
|
|
*m_head = NULL;
|
|
return (error);
|
|
}
|
|
} else if (error != 0)
|
|
return (error);
|
|
if (nsegs == 0) {
|
|
m_freem(*m_head);
|
|
*m_head = NULL;
|
|
return (EIO);
|
|
}
|
|
|
|
/* Check number of available descriptors. */
|
|
if (sc->vr_cdata.vr_tx_cnt + nsegs >= (VR_TX_RING_CNT - 1)) {
|
|
bus_dmamap_unload(sc->vr_cdata.vr_tx_tag, txd->tx_dmamap);
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
txd->tx_m = *m_head;
|
|
bus_dmamap_sync(sc->vr_cdata.vr_tx_tag, txd->tx_dmamap,
|
|
BUS_DMASYNC_PREWRITE);
|
|
|
|
/* Set checksum offload. */
|
|
csum_flags = 0;
|
|
if (((*m_head)->m_pkthdr.csum_flags & VR_CSUM_FEATURES) != 0) {
|
|
if ((*m_head)->m_pkthdr.csum_flags & CSUM_IP)
|
|
csum_flags |= VR_TXCTL_IPCSUM;
|
|
if ((*m_head)->m_pkthdr.csum_flags & CSUM_TCP)
|
|
csum_flags |= VR_TXCTL_TCPCSUM;
|
|
if ((*m_head)->m_pkthdr.csum_flags & CSUM_UDP)
|
|
csum_flags |= VR_TXCTL_UDPCSUM;
|
|
}
|
|
|
|
/*
|
|
* Quite contrary to datasheet for VIA Rhine, VR_TXCTL_TLINK bit
|
|
* is required for all descriptors regardless of single or
|
|
* multiple buffers. Also VR_TXSTAT_OWN bit is valid only for
|
|
* the first descriptor for a multi-fragmented frames. Without
|
|
* that VIA Rhine chip generates Tx underrun interrupts and can't
|
|
* send any frames.
|
|
*/
|
|
si = prod;
|
|
for (i = 0; i < nsegs; i++) {
|
|
desc = &sc->vr_rdata.vr_tx_ring[prod];
|
|
desc->vr_status = 0;
|
|
txctl = txsegs[i].ds_len | VR_TXCTL_TLINK | csum_flags;
|
|
if (i == 0)
|
|
txctl |= VR_TXCTL_FIRSTFRAG;
|
|
desc->vr_ctl = htole32(txctl);
|
|
desc->vr_data = htole32(VR_ADDR_LO(txsegs[i].ds_addr));
|
|
sc->vr_cdata.vr_tx_cnt++;
|
|
VR_INC(prod, VR_TX_RING_CNT);
|
|
}
|
|
/* Update producer index. */
|
|
sc->vr_cdata.vr_tx_prod = prod;
|
|
|
|
prod = (prod + VR_TX_RING_CNT - 1) % VR_TX_RING_CNT;
|
|
desc = &sc->vr_rdata.vr_tx_ring[prod];
|
|
|
|
/*
|
|
* Set EOP on the last desciptor and reuqest Tx completion
|
|
* interrupt for every VR_TX_INTR_THRESH-th frames.
|
|
*/
|
|
VR_INC(sc->vr_cdata.vr_tx_pkts, VR_TX_INTR_THRESH);
|
|
if (sc->vr_cdata.vr_tx_pkts == 0)
|
|
desc->vr_ctl |= htole32(VR_TXCTL_LASTFRAG | VR_TXCTL_FINT);
|
|
else
|
|
desc->vr_ctl |= htole32(VR_TXCTL_LASTFRAG);
|
|
|
|
/* Lastly turn the first descriptor ownership to hardware. */
|
|
desc = &sc->vr_rdata.vr_tx_ring[si];
|
|
desc->vr_status |= htole32(VR_TXSTAT_OWN);
|
|
|
|
/* Sync descriptors. */
|
|
bus_dmamap_sync(sc->vr_cdata.vr_tx_ring_tag,
|
|
sc->vr_cdata.vr_tx_ring_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
vr_start(struct ifnet *ifp)
|
|
{
|
|
struct vr_softc *sc;
|
|
|
|
sc = ifp->if_softc;
|
|
VR_LOCK(sc);
|
|
vr_start_locked(ifp);
|
|
VR_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
vr_start_locked(struct ifnet *ifp)
|
|
{
|
|
struct vr_softc *sc;
|
|
struct mbuf *m_head;
|
|
int enq;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
VR_LOCK_ASSERT(sc);
|
|
|
|
if ((ifp->if_drv_flags & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) !=
|
|
IFF_DRV_RUNNING || (sc->vr_flags & VR_F_LINK) == 0)
|
|
return;
|
|
|
|
for (enq = 0; !IFQ_DRV_IS_EMPTY(&ifp->if_snd) &&
|
|
sc->vr_cdata.vr_tx_cnt < VR_TX_RING_CNT - 2; ) {
|
|
IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head);
|
|
if (m_head == NULL)
|
|
break;
|
|
/*
|
|
* Pack the data into the transmit ring. If we
|
|
* don't have room, set the OACTIVE flag and wait
|
|
* for the NIC to drain the ring.
|
|
*/
|
|
if (vr_encap(sc, &m_head)) {
|
|
if (m_head == NULL)
|
|
break;
|
|
IFQ_DRV_PREPEND(&ifp->if_snd, m_head);
|
|
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
|
|
break;
|
|
}
|
|
|
|
enq++;
|
|
/*
|
|
* If there's a BPF listener, bounce a copy of this frame
|
|
* to him.
|
|
*/
|
|
ETHER_BPF_MTAP(ifp, m_head);
|
|
}
|
|
|
|
if (enq > 0) {
|
|
/* Tell the chip to start transmitting. */
|
|
VR_SETBIT(sc, VR_CR0, VR_CR0_TX_GO);
|
|
/* Set a timeout in case the chip goes out to lunch. */
|
|
sc->vr_watchdog_timer = 5;
|
|
}
|
|
}
|
|
|
|
static void
|
|
vr_init(void *xsc)
|
|
{
|
|
struct vr_softc *sc;
|
|
|
|
sc = (struct vr_softc *)xsc;
|
|
VR_LOCK(sc);
|
|
vr_init_locked(sc);
|
|
VR_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
vr_init_locked(struct vr_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
struct mii_data *mii;
|
|
bus_addr_t addr;
|
|
int i;
|
|
|
|
VR_LOCK_ASSERT(sc);
|
|
|
|
ifp = sc->vr_ifp;
|
|
mii = device_get_softc(sc->vr_miibus);
|
|
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0)
|
|
return;
|
|
|
|
/* Cancel pending I/O and free all RX/TX buffers. */
|
|
vr_stop(sc);
|
|
vr_reset(sc);
|
|
|
|
/* Set our station address. */
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++)
|
|
CSR_WRITE_1(sc, VR_PAR0 + i, IF_LLADDR(sc->vr_ifp)[i]);
|
|
|
|
/* Set DMA size. */
|
|
VR_CLRBIT(sc, VR_BCR0, VR_BCR0_DMA_LENGTH);
|
|
VR_SETBIT(sc, VR_BCR0, VR_BCR0_DMA_STORENFWD);
|
|
|
|
/*
|
|
* BCR0 and BCR1 can override the RXCFG and TXCFG registers,
|
|
* so we must set both.
|
|
*/
|
|
VR_CLRBIT(sc, VR_BCR0, VR_BCR0_RX_THRESH);
|
|
VR_SETBIT(sc, VR_BCR0, VR_BCR0_RXTHRESH128BYTES);
|
|
|
|
VR_CLRBIT(sc, VR_BCR1, VR_BCR1_TX_THRESH);
|
|
VR_SETBIT(sc, VR_BCR1, vr_tx_threshold_tables[sc->vr_txthresh].bcr_cfg);
|
|
|
|
VR_CLRBIT(sc, VR_RXCFG, VR_RXCFG_RX_THRESH);
|
|
VR_SETBIT(sc, VR_RXCFG, VR_RXTHRESH_128BYTES);
|
|
|
|
VR_CLRBIT(sc, VR_TXCFG, VR_TXCFG_TX_THRESH);
|
|
VR_SETBIT(sc, VR_TXCFG, vr_tx_threshold_tables[sc->vr_txthresh].tx_cfg);
|
|
|
|
/* Init circular RX list. */
|
|
if (vr_rx_ring_init(sc) != 0) {
|
|
device_printf(sc->vr_dev,
|
|
"initialization failed: no memory for rx buffers\n");
|
|
vr_stop(sc);
|
|
return;
|
|
}
|
|
|
|
/* Init tx descriptors. */
|
|
vr_tx_ring_init(sc);
|
|
|
|
if ((sc->vr_quirks & VR_Q_CAM) != 0) {
|
|
uint8_t vcam[2] = { 0, 0 };
|
|
|
|
/* Disable VLAN hardware tag insertion/stripping. */
|
|
VR_CLRBIT(sc, VR_TXCFG, VR_TXCFG_TXTAGEN | VR_TXCFG_RXTAGCTL);
|
|
/* Disable VLAN hardware filtering. */
|
|
VR_CLRBIT(sc, VR_BCR1, VR_BCR1_VLANFILT_ENB);
|
|
/* Disable all CAM entries. */
|
|
vr_cam_mask(sc, VR_MCAST_CAM, 0);
|
|
vr_cam_mask(sc, VR_VLAN_CAM, 0);
|
|
/* Enable the first VLAN CAM. */
|
|
vr_cam_data(sc, VR_VLAN_CAM, 0, vcam);
|
|
vr_cam_mask(sc, VR_VLAN_CAM, 1);
|
|
}
|
|
|
|
/*
|
|
* Set up receive filter.
|
|
*/
|
|
vr_set_filter(sc);
|
|
|
|
/*
|
|
* Load the address of the RX ring.
|
|
*/
|
|
addr = VR_RX_RING_ADDR(sc, 0);
|
|
CSR_WRITE_4(sc, VR_RXADDR, VR_ADDR_LO(addr));
|
|
/*
|
|
* Load the address of the TX ring.
|
|
*/
|
|
addr = VR_TX_RING_ADDR(sc, 0);
|
|
CSR_WRITE_4(sc, VR_TXADDR, VR_ADDR_LO(addr));
|
|
/* Default : full-duplex, no Tx poll. */
|
|
CSR_WRITE_1(sc, VR_CR1, VR_CR1_FULLDUPLEX | VR_CR1_TX_NOPOLL);
|
|
|
|
/* Set flow-control parameters for Rhine III. */
|
|
if (sc->vr_revid >= REV_ID_VT6105_A0) {
|
|
/*
|
|
* Configure Rx buffer count available for incoming
|
|
* packet.
|
|
* Even though data sheet says almost nothing about
|
|
* this register, this register should be updated
|
|
* whenever driver adds new RX buffers to controller.
|
|
* Otherwise, XON frame is not sent to link partner
|
|
* even if controller has enough RX buffers and you
|
|
* would be isolated from network.
|
|
* The controller is not smart enough to know number
|
|
* of available RX buffers so driver have to let
|
|
* controller know how many RX buffers are posted.
|
|
* In other words, this register works like a residue
|
|
* counter for RX buffers and should be initialized
|
|
* to the number of total RX buffers - 1 before
|
|
* enabling RX MAC. Note, this register is 8bits so
|
|
* it effectively limits the maximum number of RX
|
|
* buffer to be configured by controller is 255.
|
|
*/
|
|
CSR_WRITE_1(sc, VR_FLOWCR0, VR_RX_RING_CNT - 1);
|
|
/*
|
|
* Tx pause low threshold : 8 free receive buffers
|
|
* Tx pause XON high threshold : 24 free receive buffers
|
|
*/
|
|
CSR_WRITE_1(sc, VR_FLOWCR1,
|
|
VR_FLOWCR1_TXLO8 | VR_FLOWCR1_TXHI24 | VR_FLOWCR1_XONXOFF);
|
|
/* Set Tx pause timer. */
|
|
CSR_WRITE_2(sc, VR_PAUSETIMER, 0xffff);
|
|
}
|
|
|
|
/* Enable receiver and transmitter. */
|
|
CSR_WRITE_1(sc, VR_CR0,
|
|
VR_CR0_START | VR_CR0_TX_ON | VR_CR0_RX_ON | VR_CR0_RX_GO);
|
|
|
|
CSR_WRITE_2(sc, VR_ISR, 0xFFFF);
|
|
#ifdef DEVICE_POLLING
|
|
/*
|
|
* Disable interrupts if we are polling.
|
|
*/
|
|
if (ifp->if_capenable & IFCAP_POLLING)
|
|
CSR_WRITE_2(sc, VR_IMR, 0);
|
|
else
|
|
#endif
|
|
/*
|
|
* Enable interrupts and disable MII intrs.
|
|
*/
|
|
CSR_WRITE_2(sc, VR_IMR, VR_INTRS);
|
|
if (sc->vr_revid > REV_ID_VT6102_A)
|
|
CSR_WRITE_2(sc, VR_MII_IMR, 0);
|
|
|
|
ifp->if_drv_flags |= IFF_DRV_RUNNING;
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
|
|
sc->vr_flags &= ~(VR_F_LINK | VR_F_TXPAUSE);
|
|
mii_mediachg(mii);
|
|
|
|
callout_reset(&sc->vr_stat_callout, hz, vr_tick, sc);
|
|
}
|
|
|
|
/*
|
|
* Set media options.
|
|
*/
|
|
static int
|
|
vr_ifmedia_upd(struct ifnet *ifp)
|
|
{
|
|
struct vr_softc *sc;
|
|
struct mii_data *mii;
|
|
struct mii_softc *miisc;
|
|
int error;
|
|
|
|
sc = ifp->if_softc;
|
|
VR_LOCK(sc);
|
|
mii = device_get_softc(sc->vr_miibus);
|
|
LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
|
|
PHY_RESET(miisc);
|
|
sc->vr_flags &= ~(VR_F_LINK | VR_F_TXPAUSE);
|
|
error = mii_mediachg(mii);
|
|
VR_UNLOCK(sc);
|
|
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Report current media status.
|
|
*/
|
|
static void
|
|
vr_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
|
|
{
|
|
struct vr_softc *sc;
|
|
struct mii_data *mii;
|
|
|
|
sc = ifp->if_softc;
|
|
mii = device_get_softc(sc->vr_miibus);
|
|
VR_LOCK(sc);
|
|
if ((ifp->if_flags & IFF_UP) == 0) {
|
|
VR_UNLOCK(sc);
|
|
return;
|
|
}
|
|
mii_pollstat(mii);
|
|
ifmr->ifm_active = mii->mii_media_active;
|
|
ifmr->ifm_status = mii->mii_media_status;
|
|
VR_UNLOCK(sc);
|
|
}
|
|
|
|
static int
|
|
vr_ioctl(struct ifnet *ifp, u_long command, caddr_t data)
|
|
{
|
|
struct vr_softc *sc;
|
|
struct ifreq *ifr;
|
|
struct mii_data *mii;
|
|
int error, mask;
|
|
|
|
sc = ifp->if_softc;
|
|
ifr = (struct ifreq *)data;
|
|
error = 0;
|
|
|
|
switch (command) {
|
|
case SIOCSIFFLAGS:
|
|
VR_LOCK(sc);
|
|
if (ifp->if_flags & IFF_UP) {
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
if ((ifp->if_flags ^ sc->vr_if_flags) &
|
|
(IFF_PROMISC | IFF_ALLMULTI))
|
|
vr_set_filter(sc);
|
|
} else {
|
|
if ((sc->vr_flags & VR_F_DETACHED) == 0)
|
|
vr_init_locked(sc);
|
|
}
|
|
} else {
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
|
|
vr_stop(sc);
|
|
}
|
|
sc->vr_if_flags = ifp->if_flags;
|
|
VR_UNLOCK(sc);
|
|
break;
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
VR_LOCK(sc);
|
|
vr_set_filter(sc);
|
|
VR_UNLOCK(sc);
|
|
break;
|
|
case SIOCGIFMEDIA:
|
|
case SIOCSIFMEDIA:
|
|
mii = device_get_softc(sc->vr_miibus);
|
|
error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command);
|
|
break;
|
|
case SIOCSIFCAP:
|
|
mask = ifr->ifr_reqcap ^ ifp->if_capenable;
|
|
#ifdef DEVICE_POLLING
|
|
if (mask & IFCAP_POLLING) {
|
|
if (ifr->ifr_reqcap & IFCAP_POLLING) {
|
|
error = ether_poll_register(vr_poll, ifp);
|
|
if (error != 0)
|
|
break;
|
|
VR_LOCK(sc);
|
|
/* Disable interrupts. */
|
|
CSR_WRITE_2(sc, VR_IMR, 0x0000);
|
|
ifp->if_capenable |= IFCAP_POLLING;
|
|
VR_UNLOCK(sc);
|
|
} else {
|
|
error = ether_poll_deregister(ifp);
|
|
/* Enable interrupts. */
|
|
VR_LOCK(sc);
|
|
CSR_WRITE_2(sc, VR_IMR, VR_INTRS);
|
|
ifp->if_capenable &= ~IFCAP_POLLING;
|
|
VR_UNLOCK(sc);
|
|
}
|
|
}
|
|
#endif /* DEVICE_POLLING */
|
|
if ((mask & IFCAP_TXCSUM) != 0 &&
|
|
(IFCAP_TXCSUM & ifp->if_capabilities) != 0) {
|
|
ifp->if_capenable ^= IFCAP_TXCSUM;
|
|
if ((IFCAP_TXCSUM & ifp->if_capenable) != 0)
|
|
ifp->if_hwassist |= VR_CSUM_FEATURES;
|
|
else
|
|
ifp->if_hwassist &= ~VR_CSUM_FEATURES;
|
|
}
|
|
if ((mask & IFCAP_RXCSUM) != 0 &&
|
|
(IFCAP_RXCSUM & ifp->if_capabilities) != 0)
|
|
ifp->if_capenable ^= IFCAP_RXCSUM;
|
|
if ((mask & IFCAP_WOL_UCAST) != 0 &&
|
|
(ifp->if_capabilities & IFCAP_WOL_UCAST) != 0)
|
|
ifp->if_capenable ^= IFCAP_WOL_UCAST;
|
|
if ((mask & IFCAP_WOL_MAGIC) != 0 &&
|
|
(ifp->if_capabilities & IFCAP_WOL_MAGIC) != 0)
|
|
ifp->if_capenable ^= IFCAP_WOL_MAGIC;
|
|
break;
|
|
default:
|
|
error = ether_ioctl(ifp, command, data);
|
|
break;
|
|
}
|
|
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
vr_watchdog(struct vr_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
|
|
VR_LOCK_ASSERT(sc);
|
|
|
|
if (sc->vr_watchdog_timer == 0 || --sc->vr_watchdog_timer)
|
|
return;
|
|
|
|
ifp = sc->vr_ifp;
|
|
/*
|
|
* Reclaim first as we don't request interrupt for every packets.
|
|
*/
|
|
vr_txeof(sc);
|
|
if (sc->vr_cdata.vr_tx_cnt == 0)
|
|
return;
|
|
|
|
if ((sc->vr_flags & VR_F_LINK) == 0) {
|
|
if (bootverbose)
|
|
if_printf(sc->vr_ifp, "watchdog timeout "
|
|
"(missed link)\n");
|
|
ifp->if_oerrors++;
|
|
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
vr_init_locked(sc);
|
|
return;
|
|
}
|
|
|
|
ifp->if_oerrors++;
|
|
if_printf(ifp, "watchdog timeout\n");
|
|
|
|
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
vr_init_locked(sc);
|
|
|
|
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
|
|
vr_start_locked(ifp);
|
|
}
|
|
|
|
static void
|
|
vr_tx_start(struct vr_softc *sc)
|
|
{
|
|
bus_addr_t addr;
|
|
uint8_t cmd;
|
|
|
|
cmd = CSR_READ_1(sc, VR_CR0);
|
|
if ((cmd & VR_CR0_TX_ON) == 0) {
|
|
addr = VR_TX_RING_ADDR(sc, sc->vr_cdata.vr_tx_cons);
|
|
CSR_WRITE_4(sc, VR_TXADDR, VR_ADDR_LO(addr));
|
|
cmd |= VR_CR0_TX_ON;
|
|
CSR_WRITE_1(sc, VR_CR0, cmd);
|
|
}
|
|
if (sc->vr_cdata.vr_tx_cnt != 0) {
|
|
sc->vr_watchdog_timer = 5;
|
|
VR_SETBIT(sc, VR_CR0, VR_CR0_TX_GO);
|
|
}
|
|
}
|
|
|
|
static void
|
|
vr_rx_start(struct vr_softc *sc)
|
|
{
|
|
bus_addr_t addr;
|
|
uint8_t cmd;
|
|
|
|
cmd = CSR_READ_1(sc, VR_CR0);
|
|
if ((cmd & VR_CR0_RX_ON) == 0) {
|
|
addr = VR_RX_RING_ADDR(sc, sc->vr_cdata.vr_rx_cons);
|
|
CSR_WRITE_4(sc, VR_RXADDR, VR_ADDR_LO(addr));
|
|
cmd |= VR_CR0_RX_ON;
|
|
CSR_WRITE_1(sc, VR_CR0, cmd);
|
|
}
|
|
CSR_WRITE_1(sc, VR_CR0, cmd | VR_CR0_RX_GO);
|
|
}
|
|
|
|
static int
|
|
vr_tx_stop(struct vr_softc *sc)
|
|
{
|
|
int i;
|
|
uint8_t cmd;
|
|
|
|
cmd = CSR_READ_1(sc, VR_CR0);
|
|
if ((cmd & VR_CR0_TX_ON) != 0) {
|
|
cmd &= ~VR_CR0_TX_ON;
|
|
CSR_WRITE_1(sc, VR_CR0, cmd);
|
|
for (i = VR_TIMEOUT; i > 0; i--) {
|
|
DELAY(5);
|
|
cmd = CSR_READ_1(sc, VR_CR0);
|
|
if ((cmd & VR_CR0_TX_ON) == 0)
|
|
break;
|
|
}
|
|
if (i == 0)
|
|
return (ETIMEDOUT);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
vr_rx_stop(struct vr_softc *sc)
|
|
{
|
|
int i;
|
|
uint8_t cmd;
|
|
|
|
cmd = CSR_READ_1(sc, VR_CR0);
|
|
if ((cmd & VR_CR0_RX_ON) != 0) {
|
|
cmd &= ~VR_CR0_RX_ON;
|
|
CSR_WRITE_1(sc, VR_CR0, cmd);
|
|
for (i = VR_TIMEOUT; i > 0; i--) {
|
|
DELAY(5);
|
|
cmd = CSR_READ_1(sc, VR_CR0);
|
|
if ((cmd & VR_CR0_RX_ON) == 0)
|
|
break;
|
|
}
|
|
if (i == 0)
|
|
return (ETIMEDOUT);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Stop the adapter and free any mbufs allocated to the
|
|
* RX and TX lists.
|
|
*/
|
|
static void
|
|
vr_stop(struct vr_softc *sc)
|
|
{
|
|
struct vr_txdesc *txd;
|
|
struct vr_rxdesc *rxd;
|
|
struct ifnet *ifp;
|
|
int i;
|
|
|
|
VR_LOCK_ASSERT(sc);
|
|
|
|
ifp = sc->vr_ifp;
|
|
sc->vr_watchdog_timer = 0;
|
|
|
|
callout_stop(&sc->vr_stat_callout);
|
|
ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
|
|
|
|
CSR_WRITE_1(sc, VR_CR0, VR_CR0_STOP);
|
|
if (vr_rx_stop(sc) != 0)
|
|
device_printf(sc->vr_dev, "%s: Rx shutdown error\n", __func__);
|
|
if (vr_tx_stop(sc) != 0)
|
|
device_printf(sc->vr_dev, "%s: Tx shutdown error\n", __func__);
|
|
/* Clear pending interrupts. */
|
|
CSR_WRITE_2(sc, VR_ISR, 0xFFFF);
|
|
CSR_WRITE_2(sc, VR_IMR, 0x0000);
|
|
CSR_WRITE_4(sc, VR_TXADDR, 0x00000000);
|
|
CSR_WRITE_4(sc, VR_RXADDR, 0x00000000);
|
|
|
|
/*
|
|
* Free RX and TX mbufs still in the queues.
|
|
*/
|
|
for (i = 0; i < VR_RX_RING_CNT; i++) {
|
|
rxd = &sc->vr_cdata.vr_rxdesc[i];
|
|
if (rxd->rx_m != NULL) {
|
|
bus_dmamap_sync(sc->vr_cdata.vr_rx_tag,
|
|
rxd->rx_dmamap, BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(sc->vr_cdata.vr_rx_tag,
|
|
rxd->rx_dmamap);
|
|
m_freem(rxd->rx_m);
|
|
rxd->rx_m = NULL;
|
|
}
|
|
}
|
|
for (i = 0; i < VR_TX_RING_CNT; i++) {
|
|
txd = &sc->vr_cdata.vr_txdesc[i];
|
|
if (txd->tx_m != NULL) {
|
|
bus_dmamap_sync(sc->vr_cdata.vr_tx_tag,
|
|
txd->tx_dmamap, BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(sc->vr_cdata.vr_tx_tag,
|
|
txd->tx_dmamap);
|
|
m_freem(txd->tx_m);
|
|
txd->tx_m = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Stop all chip I/O so that the kernel's probe routines don't
|
|
* get confused by errant DMAs when rebooting.
|
|
*/
|
|
static int
|
|
vr_shutdown(device_t dev)
|
|
{
|
|
|
|
return (vr_suspend(dev));
|
|
}
|
|
|
|
static int
|
|
vr_suspend(device_t dev)
|
|
{
|
|
struct vr_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
VR_LOCK(sc);
|
|
vr_stop(sc);
|
|
vr_setwol(sc);
|
|
sc->vr_flags |= VR_F_SUSPENDED;
|
|
VR_UNLOCK(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
vr_resume(device_t dev)
|
|
{
|
|
struct vr_softc *sc;
|
|
struct ifnet *ifp;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
VR_LOCK(sc);
|
|
ifp = sc->vr_ifp;
|
|
vr_clrwol(sc);
|
|
vr_reset(sc);
|
|
if (ifp->if_flags & IFF_UP)
|
|
vr_init_locked(sc);
|
|
|
|
sc->vr_flags &= ~VR_F_SUSPENDED;
|
|
VR_UNLOCK(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
vr_setwol(struct vr_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
int pmc;
|
|
uint16_t pmstat;
|
|
uint8_t v;
|
|
|
|
VR_LOCK_ASSERT(sc);
|
|
|
|
if (sc->vr_revid < REV_ID_VT6102_A ||
|
|
pci_find_cap(sc->vr_dev, PCIY_PMG, &pmc) != 0)
|
|
return;
|
|
|
|
ifp = sc->vr_ifp;
|
|
|
|
/* Clear WOL configuration. */
|
|
CSR_WRITE_1(sc, VR_WOLCR_CLR, 0xFF);
|
|
CSR_WRITE_1(sc, VR_WOLCFG_CLR, VR_WOLCFG_SAB | VR_WOLCFG_SAM);
|
|
CSR_WRITE_1(sc, VR_PWRCSR_CLR, 0xFF);
|
|
CSR_WRITE_1(sc, VR_PWRCFG_CLR, VR_PWRCFG_WOLEN);
|
|
if (sc->vr_revid > REV_ID_VT6105_B0) {
|
|
/* Newer Rhine III supports two additional patterns. */
|
|
CSR_WRITE_1(sc, VR_WOLCFG_CLR, VR_WOLCFG_PATTERN_PAGE);
|
|
CSR_WRITE_1(sc, VR_TESTREG_CLR, 3);
|
|
CSR_WRITE_1(sc, VR_PWRCSR1_CLR, 3);
|
|
}
|
|
if ((ifp->if_capenable & IFCAP_WOL_UCAST) != 0)
|
|
CSR_WRITE_1(sc, VR_WOLCR_SET, VR_WOLCR_UCAST);
|
|
if ((ifp->if_capenable & IFCAP_WOL_MAGIC) != 0)
|
|
CSR_WRITE_1(sc, VR_WOLCR_SET, VR_WOLCR_MAGIC);
|
|
/*
|
|
* It seems that multicast wakeup frames require programming pattern
|
|
* registers and valid CRC as well as pattern mask for each pattern.
|
|
* While it's possible to setup such a pattern it would complicate
|
|
* WOL configuration so ignore multicast wakeup frames.
|
|
*/
|
|
if ((ifp->if_capenable & IFCAP_WOL) != 0) {
|
|
CSR_WRITE_1(sc, VR_WOLCFG_SET, VR_WOLCFG_SAB | VR_WOLCFG_SAM);
|
|
v = CSR_READ_1(sc, VR_STICKHW);
|
|
CSR_WRITE_1(sc, VR_STICKHW, v | VR_STICKHW_WOL_ENB);
|
|
CSR_WRITE_1(sc, VR_PWRCFG_SET, VR_PWRCFG_WOLEN);
|
|
}
|
|
|
|
/* Put hardware into sleep. */
|
|
v = CSR_READ_1(sc, VR_STICKHW);
|
|
v |= VR_STICKHW_DS0 | VR_STICKHW_DS1;
|
|
CSR_WRITE_1(sc, VR_STICKHW, v);
|
|
|
|
/* Request PME if WOL is requested. */
|
|
pmstat = pci_read_config(sc->vr_dev, pmc + PCIR_POWER_STATUS, 2);
|
|
pmstat &= ~(PCIM_PSTAT_PME | PCIM_PSTAT_PMEENABLE);
|
|
if ((ifp->if_capenable & IFCAP_WOL) != 0)
|
|
pmstat |= PCIM_PSTAT_PME | PCIM_PSTAT_PMEENABLE;
|
|
pci_write_config(sc->vr_dev, pmc + PCIR_POWER_STATUS, pmstat, 2);
|
|
}
|
|
|
|
static void
|
|
vr_clrwol(struct vr_softc *sc)
|
|
{
|
|
uint8_t v;
|
|
|
|
VR_LOCK_ASSERT(sc);
|
|
|
|
if (sc->vr_revid < REV_ID_VT6102_A)
|
|
return;
|
|
|
|
/* Take hardware out of sleep. */
|
|
v = CSR_READ_1(sc, VR_STICKHW);
|
|
v &= ~(VR_STICKHW_DS0 | VR_STICKHW_DS1 | VR_STICKHW_WOL_ENB);
|
|
CSR_WRITE_1(sc, VR_STICKHW, v);
|
|
|
|
/* Clear WOL configuration as WOL may interfere normal operation. */
|
|
CSR_WRITE_1(sc, VR_WOLCR_CLR, 0xFF);
|
|
CSR_WRITE_1(sc, VR_WOLCFG_CLR,
|
|
VR_WOLCFG_SAB | VR_WOLCFG_SAM | VR_WOLCFG_PMEOVR);
|
|
CSR_WRITE_1(sc, VR_PWRCSR_CLR, 0xFF);
|
|
CSR_WRITE_1(sc, VR_PWRCFG_CLR, VR_PWRCFG_WOLEN);
|
|
if (sc->vr_revid > REV_ID_VT6105_B0) {
|
|
/* Newer Rhine III supports two additional patterns. */
|
|
CSR_WRITE_1(sc, VR_WOLCFG_CLR, VR_WOLCFG_PATTERN_PAGE);
|
|
CSR_WRITE_1(sc, VR_TESTREG_CLR, 3);
|
|
CSR_WRITE_1(sc, VR_PWRCSR1_CLR, 3);
|
|
}
|
|
}
|
|
|
|
static int
|
|
vr_sysctl_stats(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct vr_softc *sc;
|
|
struct vr_statistics *stat;
|
|
int error;
|
|
int result;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
|
|
if (error != 0 || req->newptr == NULL)
|
|
return (error);
|
|
|
|
if (result == 1) {
|
|
sc = (struct vr_softc *)arg1;
|
|
stat = &sc->vr_stat;
|
|
|
|
printf("%s statistics:\n", device_get_nameunit(sc->vr_dev));
|
|
printf("Outbound good frames : %ju\n",
|
|
(uintmax_t)stat->tx_ok);
|
|
printf("Inbound good frames : %ju\n",
|
|
(uintmax_t)stat->rx_ok);
|
|
printf("Outbound errors : %u\n", stat->tx_errors);
|
|
printf("Inbound errors : %u\n", stat->rx_errors);
|
|
printf("Inbound no buffers : %u\n", stat->rx_no_buffers);
|
|
printf("Inbound no mbuf clusters: %d\n", stat->rx_no_mbufs);
|
|
printf("Inbound FIFO overflows : %d\n",
|
|
stat->rx_fifo_overflows);
|
|
printf("Inbound CRC errors : %u\n", stat->rx_crc_errors);
|
|
printf("Inbound frame alignment errors : %u\n",
|
|
stat->rx_alignment);
|
|
printf("Inbound giant frames : %u\n", stat->rx_giants);
|
|
printf("Inbound runt frames : %u\n", stat->rx_runts);
|
|
printf("Outbound aborted with excessive collisions : %u\n",
|
|
stat->tx_abort);
|
|
printf("Outbound collisions : %u\n", stat->tx_collisions);
|
|
printf("Outbound late collisions : %u\n",
|
|
stat->tx_late_collisions);
|
|
printf("Outbound underrun : %u\n", stat->tx_underrun);
|
|
printf("PCI bus errors : %u\n", stat->bus_errors);
|
|
printf("driver restarted due to Rx/Tx shutdown failure : %u\n",
|
|
stat->num_restart);
|
|
}
|
|
|
|
return (error);
|
|
}
|