cdddb20941
proved to be necessary to make the static drivers work in EITHER/OR or BOTH configurations. Modules will still build in sys/modules/igb or em as before. This also updates the igb driver for support for the 82576 adapter, adds shared code fixes, and etc.... MFC after: ASAP
103 lines
4.4 KiB
C
103 lines
4.4 KiB
C
/*******************************************************************************
|
|
|
|
Copyright (c) 2001-2008, Intel Corporation
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice,
|
|
this list of conditions and the following disclaimer.
|
|
|
|
2. Redistributions in binary form must reproduce the above copyright
|
|
notice, this list of conditions and the following disclaimer in the
|
|
documentation and/or other materials provided with the distribution.
|
|
|
|
3. Neither the name of the Intel Corporation nor the names of its
|
|
contributors may be used to endorse or promote products derived from
|
|
this software without specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
*******************************************************************************/
|
|
/* $FreeBSD$ */
|
|
|
|
|
|
#ifndef _E1000_80003ES2LAN_H_
|
|
#define _E1000_80003ES2LAN_H_
|
|
|
|
#define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL 0x00
|
|
#define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL 0x02
|
|
#define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL 0x10
|
|
#define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE 0x1F
|
|
|
|
#define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS 0x0008
|
|
#define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS 0x0800
|
|
#define E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING 0x0010
|
|
|
|
#define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004
|
|
#define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT 0x0000
|
|
#define E1000_KMRNCTRLSTA_OPMODE_E_IDLE 0x2000
|
|
|
|
#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */
|
|
#define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN 0x00010000
|
|
|
|
#define DEFAULT_TIPG_IPGT_1000_80003ES2LAN 0x8
|
|
#define DEFAULT_TIPG_IPGT_10_100_80003ES2LAN 0x9
|
|
|
|
/* GG82563 PHY Specific Status Register (Page 0, Register 16 */
|
|
#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE 0x0002 /* 1=Reversal Disabled */
|
|
#define GG82563_PSCR_CROSSOVER_MODE_MASK 0x0060
|
|
#define GG82563_PSCR_CROSSOVER_MODE_MDI 0x0000 /* 00=Manual MDI */
|
|
#define GG82563_PSCR_CROSSOVER_MODE_MDIX 0x0020 /* 01=Manual MDIX */
|
|
#define GG82563_PSCR_CROSSOVER_MODE_AUTO 0x0060 /* 11=Auto crossover */
|
|
|
|
/* PHY Specific Control Register 2 (Page 0, Register 26) */
|
|
#define GG82563_PSCR2_REVERSE_AUTO_NEG 0x2000
|
|
/* 1=Reverse Auto-Negotiation */
|
|
|
|
/* MAC Specific Control Register (Page 2, Register 21) */
|
|
/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */
|
|
#define GG82563_MSCR_TX_CLK_MASK 0x0007
|
|
#define GG82563_MSCR_TX_CLK_10MBPS_2_5 0x0004
|
|
#define GG82563_MSCR_TX_CLK_100MBPS_25 0x0005
|
|
#define GG82563_MSCR_TX_CLK_1000MBPS_2_5 0x0006
|
|
#define GG82563_MSCR_TX_CLK_1000MBPS_25 0x0007
|
|
|
|
#define GG82563_MSCR_ASSERT_CRS_ON_TX 0x0010 /* 1=Assert */
|
|
|
|
/* DSP Distance Register (Page 5, Register 26) */
|
|
/*
|
|
* 0 = <50M
|
|
* 1 = 50-80M
|
|
* 2 = 80-100M
|
|
* 3 = 110-140M
|
|
* 4 = >140M
|
|
*/
|
|
#define GG82563_DSPD_CABLE_LENGTH 0x0007
|
|
|
|
/* Kumeran Mode Control Register (Page 193, Register 16) */
|
|
#define GG82563_KMCR_PASS_FALSE_CARRIER 0x0800
|
|
|
|
/* Max number of times Kumeran read/write should be validated */
|
|
#define GG82563_MAX_KMRN_RETRY 0x5
|
|
|
|
/* Power Management Control Register (Page 193, Register 20) */
|
|
#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE 0x0001
|
|
/* 1=Enable SERDES Electrical Idle */
|
|
|
|
/* In-Band Control Register (Page 194, Register 18) */
|
|
#define GG82563_ICR_DIS_PADDING 0x0010 /* Disable Padding */
|
|
|
|
#endif
|