5280f97f95
that I've done this properly, it does work though :) )... a few minor fixes to code part-Submitted-by: Luigi
1502 lines
38 KiB
C
1502 lines
38 KiB
C
/*
|
|
* sound/ad1848.c
|
|
*
|
|
* Modified by Luigi Rizzo (luigi@iet.unipi.it)
|
|
*
|
|
* Driver for Microsoft Sound System/Windows Sound System (mss)
|
|
* -compatible boards. This includes:
|
|
*
|
|
* AD1848, CS4248
|
|
*
|
|
* CS4231, used in the GUS MAX and some other cards;
|
|
* AD1845, CS4231A (CS4231-like)
|
|
* CS4232 (CS4231+SB and MPU, PnP)
|
|
* CS4236 (upgrade of the CS4232, has a better mixer)
|
|
* OPTi931 (WSS compatible, full duplex, some differences from CS42xx)
|
|
*
|
|
* Copyright Luigi Rizzo, 1997
|
|
* Copyright by Hannu Savolainen 1994, 1995
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met: 1. Redistributions of source code must retain the above
|
|
* copyright notice, this list of conditions and the following
|
|
* disclaimer. 2. Redistributions in binary form must reproduce the
|
|
* above copyright notice, this list of conditions and the following
|
|
* disclaimer in the documentation and/or other materials provided
|
|
* with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS''
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
|
|
* PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
|
|
* OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
|
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*
|
|
* Full data sheets in PDF format for the MSS-compatible chips
|
|
* are available at
|
|
*
|
|
* http://www.crystal.com/ for the CS42XX series, or
|
|
* http://www.opti.com/ for the OPTi931
|
|
*
|
|
* The OPTi931 appears to be quite buggy.
|
|
*/
|
|
|
|
#include <i386/isa/snd/sound.h>
|
|
#if NPCM > 0
|
|
|
|
/*
|
|
* board-specific include files
|
|
*/
|
|
|
|
#include <i386/isa/snd/mss.h>
|
|
|
|
/*
|
|
* prototypes for procedures exported in the device descriptor
|
|
*/
|
|
|
|
static int mss_probe(struct isa_device *dev);
|
|
static int mss_attach(struct isa_device *dev);
|
|
|
|
static d_open_t mss_open;
|
|
static d_close_t mss_close;
|
|
static d_ioctl_t mss_ioctl;
|
|
static irq_proc_t mss_intr;
|
|
static irq_proc_t opti931_intr;
|
|
static snd_callback_t mss_callback;
|
|
|
|
/*
|
|
* prototypes for local functions
|
|
*/
|
|
|
|
static void mss_reinit(snddev_info *d);
|
|
static int AD_WAIT_INIT(snddev_info *d, int x);
|
|
static int mss_mixer_set(snddev_info *d, int dev, int value);
|
|
static int mss_set_recsrc(snddev_info *d, int mask);
|
|
static void ad1848_mixer_reset(snddev_info *d);
|
|
|
|
static void opti_write(int io_base, u_char reg, u_char data);
|
|
static u_char opti_read(int io_base, u_char reg);
|
|
static void ad_write(snddev_info *d, int reg, u_char data);
|
|
static void ad_write_cnt(snddev_info *d, int reg, u_short data);
|
|
static int ad_read(snddev_info *d, int reg);
|
|
|
|
/*
|
|
* device descriptors for the boards supported by this module.
|
|
*/
|
|
snddev_info mss_op_desc = {
|
|
"mss",
|
|
|
|
SNDCARD_MSS,
|
|
mss_probe,
|
|
mss_attach,
|
|
|
|
mss_open,
|
|
mss_close,
|
|
NULL /* mss_read */,
|
|
NULL /* mss_write */,
|
|
mss_ioctl,
|
|
sndpoll /* mss_poll */,
|
|
|
|
mss_intr,
|
|
mss_callback ,
|
|
|
|
DSP_BUFFSIZE, /* bufsize */
|
|
|
|
AFMT_STEREO |
|
|
AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW, /* audio formats */
|
|
/*
|
|
* the enhanced boards also have AFMT_IMA_ADPCM | AFMT_S16_BE
|
|
*/
|
|
} ;
|
|
|
|
/*
|
|
* this is the probe routine. Note, it is not necessary to
|
|
* go through this for PnP devices, since they are already
|
|
* indentified precisely using their PnP id.
|
|
*
|
|
* The base address supplied in the device refers to the old MSS
|
|
* specs where the four 4 registers in io space contain configuration
|
|
* information. Some boards (as an example, early MSS boards)
|
|
* has such a block of registers, whereas others (generally CS42xx)
|
|
* do not. In order to distinguish between the two and do not have
|
|
* to supply two separate probe routines, the flags entry in isa_device
|
|
* has a bit to mark this.
|
|
*
|
|
*/
|
|
|
|
static int
|
|
mss_probe(struct isa_device *dev)
|
|
{
|
|
u_char tmp;
|
|
int irq = ffs(dev->id_irq) - 1;
|
|
|
|
bzero(&pcm_info[dev->id_unit], sizeof(pcm_info[dev->id_unit]) );
|
|
if (dev->id_iobase == -1) {
|
|
dev->id_iobase = 0x530;
|
|
printf("mss_probe: no address supplied, try default 0x%x\n",
|
|
dev->id_iobase);
|
|
}
|
|
if (snd_conflict(dev->id_iobase))
|
|
return 0 ;
|
|
|
|
if ( !(dev->id_flags & DV_F_TRUE_MSS) ) /* Has no IRQ/DMA registers */
|
|
goto mss_probe_end;
|
|
|
|
/*
|
|
* Check if the IO port returns valid signature. The original MS
|
|
* Sound system returns 0x04 while some cards
|
|
* (AudioTriX Pro for example) return 0x00 or 0x0f.
|
|
*/
|
|
|
|
tmp = inb(dev->id_iobase + 3);
|
|
if (tmp == 0xff) { /* Bus float */
|
|
DDB(printf("I/O address inactive (%x), try pseudo_mss\n", tmp));
|
|
dev->id_flags &= ~DV_F_TRUE_MSS ;
|
|
goto mss_probe_end;
|
|
}
|
|
tmp &= 0x3f ;
|
|
if (tmp != 0x04 && tmp != 0x0f && tmp != 0x00) {
|
|
DDB(printf("No MSS signature detected on port 0x%x (0x%x)\n",
|
|
dev->id_iobase, inb(dev->id_iobase + 3)));
|
|
return 0;
|
|
}
|
|
if (irq > 11) {
|
|
printf("MSS: Bad IRQ %d\n", irq);
|
|
return 0;
|
|
}
|
|
if (dev->id_drq != 0 && dev->id_drq != 1 && dev->id_drq != 3) {
|
|
printf("MSS: Bad DMA %d\n", dev->id_drq);
|
|
return 0;
|
|
}
|
|
if (inb(dev->id_iobase + 3) & 0x80) {
|
|
/* 8-bit board: only drq1/3 and irq7/9 */
|
|
if (dev->id_drq == 0) {
|
|
printf("MSS: Can't use DMA0 with a 8 bit card/slot\n");
|
|
return 0;
|
|
}
|
|
if (irq != 7 && irq != 9) {
|
|
printf("MSS: Can't use IRQ%d with a 8 bit card/slot\n", irq);
|
|
return 0;
|
|
}
|
|
}
|
|
mss_probe_end:
|
|
return mss_detect(dev) ? 8 : 0 ; /* mss uses 8 regs */
|
|
}
|
|
|
|
/*
|
|
* the address passed as io_base for mss_attach is also the old
|
|
* MSS base address (e.g. 0x530). The codec is four locations ahead.
|
|
* Note that the attach routine for PnP devices might support
|
|
* device-specific initializations.
|
|
*/
|
|
|
|
static int
|
|
mss_attach(struct isa_device *dev)
|
|
{
|
|
snddev_info *d = &(pcm_info[dev->id_unit]);
|
|
|
|
printf("mss_attach <%s>%d at 0x%x irq %d dma %d:%d flags 0x%x\n",
|
|
d->name, dev->id_unit,
|
|
d->io_base, d->irq, d->dma1, d->dma2, dev->id_flags);
|
|
|
|
if ( dev->id_flags & DV_F_TRUE_MSS ) {
|
|
/* has IRQ/DMA registers, set IRQ and DMA addr */
|
|
static char interrupt_bits[12] = {
|
|
-1, -1, -1, -1, -1, 0x28, -1, 0x08, -1, 0x10, 0x18, 0x20
|
|
};
|
|
static char dma_bits[4] = { 1, 2, 0, 3 };
|
|
char bits ;
|
|
|
|
if (d->irq == -1 || (bits = interrupt_bits[d->irq]) == -1) {
|
|
dev->id_irq = 0 ; /* makk invalid irq */
|
|
return 0 ;
|
|
}
|
|
|
|
outb(dev->id_iobase, bits | 0x40); /* config port */
|
|
if ((inb(dev->id_iobase + 3) & 0x40) == 0) /* version port */
|
|
printf("[IRQ Conflict?]");
|
|
|
|
/* Write IRQ+DMA setup */
|
|
if (d->dma1 == d->dma2) /* single chan dma */
|
|
outb(dev->id_iobase, bits | dma_bits[d->dma1]);
|
|
else {
|
|
if (d->dma1 == 0 && d->dma2 == 1)
|
|
bits |= 5 ;
|
|
else if (d->dma1 == 1 && d->dma2 == 0)
|
|
bits |= 6 ;
|
|
else if (d->dma1 == 3 && d->dma2 == 0)
|
|
bits |= 7 ;
|
|
else {
|
|
printf("invalid dual dma config %d:%d\n",
|
|
d->dma1, d->dma2);
|
|
dev->id_irq = 0 ;
|
|
return 0 ;
|
|
}
|
|
outb(dev->id_iobase, bits );
|
|
}
|
|
}
|
|
mss_reinit(d);
|
|
ad1848_mixer_reset(d);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
mss_open(dev_t dev, int flags, int mode, struct proc * p)
|
|
{
|
|
int unit;
|
|
snddev_info *d;
|
|
u_long s;
|
|
|
|
dev = minor(dev);
|
|
unit = dev >> 4 ;
|
|
dev &= 0xf ;
|
|
d = &pcm_info[unit] ;
|
|
|
|
s = spltty();
|
|
/*
|
|
* This was meant to support up to 2 open descriptors for the
|
|
* some device, and check proper device usage on open.
|
|
* Unfortunately, the kernel will trap all close() calls but
|
|
* the last one, with the consequence that we cannot really
|
|
* keep track of which channels are busy.
|
|
* So, the correct tests cannot be done :( and we must rely
|
|
* on the locks on concurrent operations of the same type and
|
|
* on some approximate tests...
|
|
*/
|
|
|
|
if (dev == SND_DEV_AUDIO)
|
|
d->flags |= SND_F_BUSY_AUDIO ;
|
|
else if (dev == SND_DEV_DSP)
|
|
d->flags |= SND_F_BUSY_DSP ;
|
|
else if (dev == SND_DEV_DSP16)
|
|
d->flags |= SND_F_BUSY_DSP16 ;
|
|
if ( ! (d->flags & SND_F_BUSY) ) {
|
|
/*
|
|
* device was idle. Do the necessary initialization,
|
|
* but no need keep interrupts blocked since this device
|
|
* will not get them
|
|
*/
|
|
|
|
splx(s);
|
|
d->play_speed = d->rec_speed = DSP_DEFAULT_SPEED ;
|
|
d->flags |= SND_F_BUSY ;
|
|
|
|
d->wsel.si_pid = 0;
|
|
d->wsel.si_flags = 0;
|
|
|
|
d->rsel.si_pid = 0;
|
|
d->rsel.si_flags = 0;
|
|
|
|
d->esel.si_pid = 0;
|
|
d->esel.si_flags = 0;
|
|
|
|
if (flags & O_NONBLOCK)
|
|
d->flags |= SND_F_NBIO ;
|
|
|
|
switch (dev) {
|
|
default :
|
|
case SND_DEV_AUDIO :
|
|
d->play_fmt = d->rec_fmt = AFMT_MU_LAW ;
|
|
break ;
|
|
case SND_DEV_DSP :
|
|
d->play_fmt = d->rec_fmt = AFMT_U8 ;
|
|
break ;
|
|
case SND_DEV_DSP16 :
|
|
d->play_fmt = d->rec_fmt = AFMT_S16_LE ;
|
|
break;
|
|
}
|
|
reset_dbuf(& (d->dbuf_in) );
|
|
reset_dbuf(& (d->dbuf_out) );
|
|
ask_init(d);
|
|
}
|
|
splx(s);
|
|
return 0 ;
|
|
}
|
|
|
|
static int
|
|
mss_close(dev_t dev, int flags, int mode, struct proc * p)
|
|
{
|
|
int unit;
|
|
snddev_info *d;
|
|
u_long s;
|
|
|
|
dev = minor(dev);
|
|
unit = dev >> 4 ;
|
|
dev &= 0xf;
|
|
d = &pcm_info[unit] ;
|
|
|
|
/*
|
|
* We will only get a single close call when the last reference
|
|
* to the device is gone. But we must handle ourselves references
|
|
* through different devices.
|
|
*/
|
|
|
|
s = spltty();
|
|
|
|
if (dev == SND_DEV_AUDIO)
|
|
d->flags &= ~SND_F_BUSY_AUDIO ;
|
|
else if (dev == SND_DEV_DSP)
|
|
d->flags &= ~SND_F_BUSY_DSP ;
|
|
else if (dev == SND_DEV_DSP16)
|
|
d->flags &= ~SND_F_BUSY_DSP16 ;
|
|
if ( ! (d->flags & SND_F_BUSY_ANY) ) { /* last one ... */
|
|
d->flags |= SND_F_CLOSING ;
|
|
splx(s); /* is this ok here ? */
|
|
snd_flush(d);
|
|
outb(io_Status(d), 0); /* Clear interrupt status */
|
|
d->flags = 0 ;
|
|
}
|
|
splx(s);
|
|
return 0 ;
|
|
}
|
|
|
|
static int
|
|
mss_ioctl(dev_t dev, int cmd, caddr_t arg, int mode, struct proc * p)
|
|
{
|
|
snddev_info *d;
|
|
int unit;
|
|
|
|
dev = minor(dev);
|
|
unit = dev >> 4 ;
|
|
d = &pcm_info[unit] ;
|
|
/*
|
|
* handle mixer calls first. Reads are in the default handler,
|
|
* so do not bother about them.
|
|
*/
|
|
if ( (cmd & MIXER_WRITE(0)) == MIXER_WRITE(0) ) {
|
|
cmd &= 0xff ;
|
|
if (cmd == SOUND_MIXER_RECSRC)
|
|
return mss_set_recsrc(d, *(int *)arg) ;
|
|
else
|
|
return mss_mixer_set(d, cmd, *(int *)arg) ;
|
|
}
|
|
|
|
return ENOSYS ; /* fallback to the default ioctl handler */
|
|
}
|
|
|
|
|
|
/*
|
|
* the callback routine to handle all dma ops etc.
|
|
*/
|
|
|
|
static int
|
|
mss_callback(snddev_info *d, int reason)
|
|
{
|
|
u_long s;
|
|
u_char m;
|
|
int retry, wr, cnt;
|
|
|
|
DEB(printf("-- mss_callback reason 0x%03x\n", reason));
|
|
wr = reason & SND_CB_WR ;
|
|
reason &= SND_CB_REASON_MASK ;
|
|
switch (reason) {
|
|
case SND_CB_INIT : /* called with int enabled and no pending I/O */
|
|
/*
|
|
* perform all necessary initializations for i/o
|
|
*/
|
|
d->rec_fmt = d->play_fmt ; /* no split format on the WSS */
|
|
snd_set_blocksize(d);
|
|
mss_reinit(d);
|
|
return 1 ;
|
|
break ;
|
|
|
|
case SND_CB_START :
|
|
/* fallthrough */
|
|
case SND_CB_RESTART :
|
|
s = spltty();
|
|
cnt = wr ? d->dbuf_out.dl0 : d->dbuf_in.dl0 ;
|
|
if (d->play_fmt == AFMT_S16_LE)
|
|
cnt /= 2;
|
|
if (d->flags & SND_F_STEREO)
|
|
cnt /= 2;
|
|
cnt-- ;
|
|
|
|
DEB(printf("-- (re)start cnt %d\n", cnt));
|
|
m = ad_read(d,9) ;
|
|
DDB( if (m & 4) printf("OUCH! reg 9 0x%02x\n", m); );
|
|
m |= wr ? I9_PEN : I9_CEN ; /* enable DMA */
|
|
/*
|
|
* on the OPTi931 the enable bit seems hard to set...
|
|
*/
|
|
for (retry = 10; retry; retry--) {
|
|
ad_write(d, 9, m );
|
|
if (ad_read(d,9) ==m) break;
|
|
}
|
|
if (retry == 0)
|
|
printf("start dma, failed to set bit 0x%02x 0x%02x\n",
|
|
m, ad_read(d, 9) ) ;
|
|
if (wr || (d->dma1 == d->dma2) )
|
|
ad_write_cnt(d, 14, cnt);
|
|
else
|
|
ad_write_cnt(d, 30, cnt);
|
|
|
|
splx(s);
|
|
break ;
|
|
case SND_CB_STOP :
|
|
case SND_CB_ABORT : /* XXX check this... */
|
|
s = spltty();
|
|
m = ad_read(d,9) ;
|
|
m &= wr ? ~I9_PEN : ~I9_CEN ; /* Stop DMA */
|
|
/*
|
|
* on the OPTi931 the enable bit seems hard to set...
|
|
*/
|
|
for (retry = 10; retry ; retry-- ) {
|
|
ad_write(d, 9, m );
|
|
if (ad_read(d,9) ==m) break;
|
|
}
|
|
if (retry == 0)
|
|
printf("start dma, failed to clear bit 0x%02x 0x%02x\n",
|
|
m, ad_read(d, 9) ) ;
|
|
|
|
/* disable DMA by clearing count registers. */
|
|
if (wr || (d->dma1 == d->dma2) )
|
|
ad_write_cnt(d, 14, 0);
|
|
else
|
|
ad_write_cnt(d, 30, 0);
|
|
splx(s);
|
|
break;
|
|
}
|
|
return 0 ;
|
|
}
|
|
|
|
/*
|
|
* main irq handler for the CS423x. The OPTi931 code is
|
|
* a separate one.
|
|
*/
|
|
|
|
static void
|
|
mss_intr(int unit)
|
|
{
|
|
snddev_info *d = &pcm_info[unit];
|
|
u_char i11, c;
|
|
u_char reason; /* b0 = playback, b1 = capture, b2 = timer */
|
|
|
|
i11 = ad_read(d, 11);
|
|
reason = inb(io_Status(d));
|
|
|
|
if ( ! (reason & 1) ) /* no int, maybe a shared line ? */
|
|
return;
|
|
/* get exact reason */
|
|
c = (d->dma1 == d->dma2) ? 0x10 : ad_read(d, 24);
|
|
if ( (d->flags & SND_F_WR_DMA) && (c & 0x10) )
|
|
dsp_wrintr(d);
|
|
c = (d->dma1 == d->dma2) ? 0x20 : ad_read(d, 24);
|
|
if ( (d->flags & SND_F_RD_DMA) && (c & 0x20) )
|
|
dsp_rdintr(d);
|
|
/* XXX check this on the 4236... */
|
|
if (d->dma1 == d->dma2)
|
|
outb(io_Status(d), 0); /* Clear interrupt status */
|
|
else
|
|
ad_write(d, 24, ~c); /* ack selectively */
|
|
}
|
|
|
|
/*
|
|
* the opti931 seems to miss interrupts when working in full
|
|
* duplex. god know why...
|
|
*/
|
|
static void
|
|
opti931_intr(int unit)
|
|
{
|
|
snddev_info *d = &pcm_info[unit];
|
|
u_char masked=0, i11, mc11, c=0;
|
|
u_char reason; /* b0 = playback, b1 = capture, b2 = timer */
|
|
int loops = 10;
|
|
int w_miss=0, r_miss=0;
|
|
static int misses=0; /* XXX kludge */
|
|
|
|
#if 0
|
|
reason = inb(io_Status(d));
|
|
if ( ! (reason & 1) ) {/* no int, maybe a shared line ? */
|
|
printf("opti931_intr: flag 0, mcir11 0x%02x\n", ad_read(d,11));
|
|
return;
|
|
}
|
|
#endif
|
|
i11 = ad_read(d, 11); /* XXX what's for ? */
|
|
again:
|
|
|
|
c=mc11 = (d->dma1 == d->dma2) ? 0xc : opti_read(d->conf_base, 11);
|
|
mc11 &= 0x0c ;
|
|
if (c & 0x10) {
|
|
printf("Warning CD interrupt\n");
|
|
mc11 |= 0x10 ;
|
|
}
|
|
if (c & 0x20) {
|
|
printf("Warning MPU interrupt\n");
|
|
mc11 |= 0x20 ;
|
|
}
|
|
if (mc11 & masked)
|
|
printf("irq reset failed, mc11 0x%02x, masked 0x%02x\n", mc11, masked);
|
|
masked |= mc11 ;
|
|
if ( mc11 == 0 ) { /* perhaps can return ... */
|
|
reason = inb(io_Status(d));
|
|
if (reason & 1) {
|
|
printf("one more try...\n");
|
|
goto again;
|
|
}
|
|
if (w_miss || r_miss ) {
|
|
misses++;
|
|
if ( (misses & 0xff) == 1 )
|
|
printf("opti931: %d missed irq (now %s%s)\n",
|
|
misses, w_miss?"play ":"",
|
|
r_miss?"capture ":"");
|
|
}
|
|
if (loops==10)
|
|
printf("ouch, intr but nothing in mcir11 0x%02x\n", mc11);
|
|
if (w_miss) mc11 |= 4 ;
|
|
if (r_miss) mc11 |= 8 ;
|
|
if (mc11==0)
|
|
return;
|
|
}
|
|
|
|
if ( (d->flags & SND_F_RD_DMA) && (mc11 & 8) ) {
|
|
dsp_rdintr(d);
|
|
r_miss = 0 ;
|
|
}
|
|
else if (isa_dmastatus1(d->dma2) == 0 && (d->flags & SND_F_RD_DMA) )
|
|
r_miss = 1 ;
|
|
|
|
if ( (d->flags & SND_F_WR_DMA) && (mc11 & 4) ) {
|
|
if (isa_dmastatus1(d->dma1) != 0)
|
|
printf("opti931_intr: wr dma %d\n",
|
|
isa_dmastatus1(d->dma1));
|
|
dsp_wrintr(d);
|
|
w_miss = 0 ;
|
|
}
|
|
else if (isa_dmastatus1(d->dma1) == 0 && (d->flags & SND_F_WR_DMA) )
|
|
w_miss = 1 ;
|
|
|
|
opti_write(d->conf_base, 11, ~mc11); /* ack */
|
|
if (--loops) goto again;
|
|
printf("xxx too many loops\n");
|
|
}
|
|
|
|
/*
|
|
* Second part of the file: functions local to this module.
|
|
* in this section a few routines to access MSS registers
|
|
*
|
|
*/
|
|
|
|
static void
|
|
opti_write(int io_base, u_char reg, u_char value)
|
|
{
|
|
outb(io_base, reg);
|
|
outb(io_base+1, value);
|
|
}
|
|
|
|
static u_char
|
|
opti_read(int io_base, u_char reg)
|
|
{
|
|
outb(io_base, reg);
|
|
return inb(io_base+1);
|
|
}
|
|
/*
|
|
* AD_WAIT_INIT waits if we are initializing the board and
|
|
* we cannot modify its settings
|
|
*/
|
|
static int
|
|
AD_WAIT_INIT(snddev_info *d, int x)
|
|
{
|
|
int n = 0; /* to shut up the compiler... */
|
|
for (; x-- ; )
|
|
if ( (n=inb(io_Index_Addr(d))) & IA_BUSY)
|
|
DELAY(10);
|
|
else
|
|
return n ;
|
|
printf("AD_WAIT_INIT FAILED 0x%02x\n", n);
|
|
return n ;
|
|
}
|
|
|
|
static int
|
|
ad_read(snddev_info *d, int reg)
|
|
{
|
|
u_long flags;
|
|
int x;
|
|
|
|
flags = spltty();
|
|
AD_WAIT_INIT(d, 100);
|
|
x = inb(io_Index_Addr(d)) & ~IA_AMASK ;
|
|
outb(io_Index_Addr(d), (u_char) (reg & IA_AMASK) | x ) ;
|
|
x = inb(io_Indexed_Data(d));
|
|
splx(flags);
|
|
return x;
|
|
}
|
|
|
|
static void
|
|
ad_write(snddev_info *d, int reg, u_char data)
|
|
{
|
|
u_long flags;
|
|
|
|
int x ;
|
|
flags = spltty();
|
|
AD_WAIT_INIT(d, 100);
|
|
x = inb(io_Index_Addr(d)) & ~IA_AMASK ;
|
|
outb(io_Index_Addr(d), (u_char) (reg & IA_AMASK) | x ) ;
|
|
outb(io_Indexed_Data(d), data);
|
|
splx(flags);
|
|
}
|
|
|
|
static void
|
|
ad_write_cnt(snddev_info *d, int reg, u_short cnt)
|
|
{
|
|
ad_write(d, reg+1, cnt & 0xff );
|
|
ad_write(d, reg, cnt >> 8 ); /* upper base must be last */
|
|
}
|
|
|
|
static void
|
|
wait_for_calibration(snddev_info *d)
|
|
{
|
|
int n, t;
|
|
|
|
/*
|
|
* Wait until the auto calibration process has finished.
|
|
*
|
|
* 1) Wait until the chip becomes ready (reads don't return 0x80).
|
|
* 2) Wait until the ACI bit of I11 gets on
|
|
* 3) Wait until the ACI bit of I11 gets off
|
|
*/
|
|
|
|
n = AD_WAIT_INIT(d, 1000);
|
|
if (n & IA_BUSY)
|
|
printf("mss: Auto calibration timed out(1).\n");
|
|
|
|
for (t = 100 ; t>0 && (ad_read(d, 11) & 0x20) == 0 ; t--)
|
|
DELAY(100);
|
|
for (t = 100 ; t>0 && ad_read(d, 11) & 0x20 ; t--)
|
|
DELAY(100);
|
|
}
|
|
|
|
#if 0 /* unused right now... */
|
|
static void
|
|
ad_mute(snddev_info *d)
|
|
{
|
|
ad_write(d, 6, ad_read(d,6) | I6_MUTE);
|
|
ad_write(d, 7, ad_read(d,7) | I6_MUTE);
|
|
}
|
|
|
|
static void
|
|
ad_unmute(snddev_info *d)
|
|
{
|
|
ad_write(d, 6, ad_read(d,6) & ~I6_MUTE);
|
|
ad_write(d, 7, ad_read(d,7) & ~I6_MUTE);
|
|
}
|
|
#endif
|
|
|
|
static void
|
|
ad_enter_MCE(snddev_info *d)
|
|
{
|
|
int prev;
|
|
|
|
d->bd_flags |= BD_F_MCE_BIT;
|
|
AD_WAIT_INIT(d, 100);
|
|
prev = inb(io_Index_Addr(d));
|
|
outb(io_Index_Addr(d), prev | IA_MCE | IA_TRD ) ;
|
|
}
|
|
|
|
static void
|
|
ad_leave_MCE(snddev_info *d)
|
|
{
|
|
u_long flags;
|
|
u_char prev;
|
|
|
|
if ( (d->bd_flags & BD_F_MCE_BIT) == 0 ) {
|
|
printf("--- hey, leave_MCE: MCE bit was not set!\n");
|
|
return;
|
|
}
|
|
|
|
AD_WAIT_INIT(d, 1000);
|
|
|
|
flags = spltty();
|
|
d->bd_flags &= ~BD_F_MCE_BIT;
|
|
|
|
prev = inb(io_Index_Addr(d));
|
|
|
|
outb(io_Index_Addr(d), (prev & ~IA_MCE) | IA_TRD); /* Clear the MCE bit */
|
|
wait_for_calibration(d);
|
|
splx(flags);
|
|
}
|
|
|
|
/*
|
|
* only one source can be set...
|
|
*
|
|
* fixed -- lr 970725
|
|
*/
|
|
static int
|
|
mss_set_recsrc(snddev_info *d, int mask)
|
|
{
|
|
u_char recdev;
|
|
|
|
mask &= d->mix_rec_devs;
|
|
switch (mask) {
|
|
case SOUND_MASK_LINE:
|
|
case SOUND_MASK_LINE3:
|
|
recdev = 0;
|
|
break;
|
|
|
|
case SOUND_MASK_CD:
|
|
case SOUND_MASK_LINE1:
|
|
recdev = 0x40;
|
|
break;
|
|
|
|
case SOUND_MASK_IMIX:
|
|
recdev = 0xc0;
|
|
break;
|
|
|
|
case SOUND_MASK_MIC:
|
|
default:
|
|
mask = SOUND_MASK_MIC;
|
|
recdev = 0x80;
|
|
}
|
|
|
|
ad_write(d, 0, (ad_read(d, 0) & 0x3f) | recdev);
|
|
ad_write(d, 1, (ad_read(d, 1) & 0x3f) | recdev);
|
|
|
|
d->mix_recsrc = mask;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* mixer conversion table: from 0..100 scale to codec values
|
|
*
|
|
* I don't understand what's this for... maybe achieve a log-scale
|
|
* volume control ?
|
|
*/
|
|
|
|
static char mix_cvt[101] = {
|
|
0, 0, 3, 7,10,13,16,19,21,23,26,28,30,32,34,35,37,39,40,42,
|
|
43,45,46,47,49,50,51,52,53,55,56,57,58,59,60,61,62,63,64,65,
|
|
65,66,67,68,69,70,70,71,72,73,73,74,75,75,76,77,77,78,79,79,
|
|
80,81,81,82,82,83,84,84,85,85,86,86,87,87,88,88,89,89,90,90,
|
|
91,91,92,92,93,93,94,94,95,95,96,96,96,97,97,98,98,98,99,99,
|
|
100
|
|
};
|
|
|
|
/*
|
|
* there are differences in the mixer depending on the actual sound
|
|
* card.
|
|
*/
|
|
static int
|
|
mss_mixer_set(snddev_info *d, int dev, int value)
|
|
{
|
|
int left = value & 0x000000ff;
|
|
int right = (value & 0x0000ff00) >> 8;
|
|
|
|
int regoffs;
|
|
mixer_tab *mix_d = &mix_devices;
|
|
|
|
u_char old, val;
|
|
|
|
if (dev > 31)
|
|
return EINVAL;
|
|
|
|
if (!(d->mix_devs & (1 << dev)))
|
|
return EINVAL;
|
|
|
|
if (d->bd_id == MD_OPTI931)
|
|
mix_d = &(opti931_devices);
|
|
|
|
if ((*mix_d)[dev][LEFT_CHN].nbits == 0) {
|
|
DDB(printf("nbits = 0 for dev %d\n", dev) );
|
|
return EINVAL;
|
|
}
|
|
|
|
if (left > 100)
|
|
left = 100;
|
|
if (right > 100)
|
|
right = 100;
|
|
|
|
|
|
if ( (*mix_d)[dev][RIGHT_CHN].nbits == 0) /* Mono control */
|
|
right = left;
|
|
|
|
d->mix_levels[dev] = left | (right << 8);
|
|
|
|
/* Scale volumes */
|
|
left = mix_cvt[left];
|
|
right = mix_cvt[right];
|
|
|
|
/*
|
|
* Set the left channel
|
|
*/
|
|
|
|
regoffs = (*mix_d)[dev][LEFT_CHN].regno;
|
|
old = val = ad_read(d, regoffs);
|
|
if (regoffs != 0)
|
|
val = old & 0x7f ; /* clear mute bit. */
|
|
change_bits(mix_d, &val, dev, LEFT_CHN, left);
|
|
ad_write(d, regoffs, val);
|
|
DEB(printf("dev %d reg %d old 0x%02x new 0x%02x\n",
|
|
dev, regoffs, old, val));
|
|
|
|
if ((*mix_d)[dev][RIGHT_CHN].nbits != 0) { /* have stereo */
|
|
/*
|
|
* Set the right channel
|
|
*/
|
|
regoffs = (*mix_d)[dev][RIGHT_CHN].regno;
|
|
val = ad_read(d, regoffs);
|
|
if (regoffs != 1)
|
|
val = old & 0x7f ; /* clear mute bit. */
|
|
change_bits(mix_d, &val, dev, RIGHT_CHN, right);
|
|
ad_write(d, regoffs, val);
|
|
}
|
|
return 0; /* success */
|
|
}
|
|
|
|
static void
|
|
ad1848_mixer_reset(snddev_info *d)
|
|
{
|
|
int i;
|
|
|
|
if (d->bd_id == MD_OPTI931)
|
|
d->mix_devs = OPTI931_MIXER_DEVICES;
|
|
else if (d->bd_id != MD_AD1848)
|
|
d->mix_devs = MODE2_MIXER_DEVICES;
|
|
else
|
|
d->mix_devs = MODE1_MIXER_DEVICES;
|
|
|
|
d->mix_rec_devs = MODE1_REC_DEVICES;
|
|
|
|
for (i = 0; i < SOUND_MIXER_NRDEVICES; i++)
|
|
if (d->mix_devs & (1 << i))
|
|
mss_mixer_set(d, i, default_mixer_levels[i]);
|
|
mss_set_recsrc(d, SOUND_MASK_MIC);
|
|
}
|
|
|
|
/*
|
|
* mss_speed processes the value in play_speed finding the
|
|
* matching one. As a side effect, it returns the value to
|
|
* be written in the speed bits of the codec. It does _NOT_
|
|
* set the speed of the device (but it should!)
|
|
*
|
|
* fixed lr970724
|
|
*/
|
|
|
|
static int
|
|
mss_speed(snddev_info *d)
|
|
{
|
|
/*
|
|
* In the CS4231, the low 4 bits of I8 are used to hold the
|
|
* sample rate. Only a fixed number of values is allowed. This
|
|
* table lists them. The speed-setting routines scans the table
|
|
* looking for the closest match. This is the only supported method.
|
|
*
|
|
* In the CS4236, there is an alternate metod (which we do not
|
|
* support yet) which provides almost arbitrary frequency setting.
|
|
* In the AD1845, it looks like the sample rate can be
|
|
* almost arbitrary, and written directly to a register.
|
|
* In the OPTi931, there is a SB command which provides for
|
|
* almost arbitrary frequency setting.
|
|
*
|
|
*/
|
|
static int speeds[] = {
|
|
8000, 5512, 16000, 11025, 27429, 18900, 32000, 22050,
|
|
-1, 37800, -1, 44100, 48000, 33075, 9600, 6615
|
|
};
|
|
|
|
int arg, i, sel = 0; /* assume entry 0 does not contain -1 */
|
|
|
|
arg = d->play_speed ;
|
|
|
|
for (i=1; i < 16 ; i++)
|
|
if (speeds[i] >0 && abs(arg-speeds[i]) < abs(arg-speeds[sel]) )
|
|
sel = i ;
|
|
|
|
d->play_speed = d->rec_speed = speeds[sel] ;
|
|
return sel ;
|
|
}
|
|
|
|
/*
|
|
* mss_format checks that the format is supported (or defaults to AFMT_U8)
|
|
* and returns the bit setting for the 1848 register corresponding to
|
|
* the desired format.
|
|
*
|
|
* fixed lr970724
|
|
*/
|
|
|
|
static int
|
|
mss_format(snddev_info *d)
|
|
{
|
|
int i, arg = d->play_fmt ;
|
|
|
|
/*
|
|
* The data format uses 3 bits (just 2 on the 1848). For each
|
|
* bit setting, the following array returns the corresponding format.
|
|
* The code scans the array looking for a suitable format. In
|
|
* case it is not found, default to AFMT_U8 (not such a good
|
|
* choice, but let's do it for compatibility...).
|
|
*/
|
|
|
|
static int fmts[] = {
|
|
AFMT_U8, AFMT_MU_LAW, AFMT_S16_LE, AFMT_A_LAW,
|
|
-1, AFMT_IMA_ADPCM, AFMT_U16_BE, -1
|
|
};
|
|
|
|
if ( (arg & d->audio_fmt) == 0 ) /* unsupported fmt, default to AFMT_U8 */
|
|
arg = AFMT_U8 ;
|
|
|
|
/* ulaw/alaw seems broken on the opti931... */
|
|
if (d->bd_id == MD_OPTI931) {
|
|
if (arg == AFMT_MU_LAW) {
|
|
arg = AFMT_U8 ;
|
|
d->flags |= SND_F_XLAT8 ;
|
|
} else
|
|
d->flags &= ~SND_F_XLAT8 ;
|
|
}
|
|
/*
|
|
* check that arg is one of the supported formats in d->format;
|
|
* otherwise fallback to AFMT_U8
|
|
*/
|
|
|
|
for (i=0 ; i<8 ; i++)
|
|
if (arg == fmts[i]) break;
|
|
if (i==8) { /* not found, default to AFMT_U8 */
|
|
arg = AFMT_U8 ;
|
|
i = 0 ;
|
|
}
|
|
d->play_fmt = d->rec_fmt = arg;
|
|
|
|
return i ;
|
|
}
|
|
|
|
/*
|
|
* mss_detect can be used in the probe and the attach routine.
|
|
*
|
|
* We store probe information in pcm_info[unit]. This descriptor
|
|
* is reinitialized just before the attach, so all relevant
|
|
* information is lost, and mss_detect must be run again in
|
|
* the attach routine if necessary.
|
|
*/
|
|
|
|
int
|
|
mss_detect(struct isa_device *dev)
|
|
{
|
|
int i;
|
|
u_char tmp, tmp1, tmp2 ;
|
|
snddev_info *d = &(pcm_info[dev->id_unit]);
|
|
char *name;
|
|
|
|
d->io_base = dev->id_iobase;
|
|
d->bd_flags |= BD_F_MCE_BIT ;
|
|
if (d->bd_id != 0) {
|
|
printf("preselected bd_id 0x%04x -- %s\n",
|
|
d->bd_id, d->name ? d->name : "???");
|
|
return 1;
|
|
}
|
|
|
|
name = "AD1848" ;
|
|
d->bd_id = MD_AD1848; /* AD1848 or CS4248 */
|
|
|
|
/*
|
|
* Check that the I/O address is in use.
|
|
*
|
|
* bit 7 of the base I/O port is known to be 0 after the chip has
|
|
* performed it's power on initialization. Just assume this has
|
|
* happened before the OS is starting.
|
|
*
|
|
* If the I/O address is unused, it typically returns 0xff.
|
|
*/
|
|
|
|
for (i=0; i<10; i++)
|
|
if (inb(io_Index_Addr(d)) & IA_BUSY)
|
|
DELAY(10000); /* maybe busy, wait & retry later */
|
|
else
|
|
break ;
|
|
if ((inb(io_Index_Addr(d)) & IA_BUSY) != 0x00) { /* Not a AD1848 */
|
|
DDB(printf("mss_detect error, busy still set (0x%02x)\n",
|
|
inb(io_Index_Addr(d))));
|
|
return 0;
|
|
}
|
|
/*
|
|
* Test if it's possible to change contents of the indirect
|
|
* registers. Registers 0 and 1 are ADC volume registers. The bit
|
|
* 0x10 is read only so try to avoid using it.
|
|
*/
|
|
|
|
ad_write(d, 0, 0xaa);
|
|
ad_write(d, 1, 0x45);/* 0x55 with bit 0x10 clear */
|
|
tmp1 = ad_read(d, 0) ;
|
|
tmp2 = ad_read(d, 1) ;
|
|
if ( tmp1 != 0xaa || tmp2 != 0x45) {
|
|
DDB(printf("mss_detect error - IREG (0x%02x/0x%02x) want 0xaa/0x45\n",
|
|
tmp1, tmp2));
|
|
return 0;
|
|
}
|
|
|
|
ad_write(d, 0, 0x45);
|
|
ad_write(d, 1, 0xaa);
|
|
tmp1 = ad_read(d, 0) ;
|
|
tmp2 = ad_read(d, 1) ;
|
|
|
|
if (tmp1 != 0x45 || tmp2 != 0xaa) {
|
|
DDB(printf("mss_detect error - IREG2 (%x/%x)\n", tmp1, tmp2));
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The indirect register I12 has some read only bits. Lets try to
|
|
* change them.
|
|
*/
|
|
|
|
tmp = ad_read(d, 12);
|
|
ad_write(d, 12, (~tmp) & 0x0f);
|
|
tmp1 = ad_read(d, 12);
|
|
|
|
if ((tmp & 0x0f) != (tmp1 & 0x0f)) {
|
|
DDB(printf("mss_detect error - I12 (0x%02x was 0x%02x)\n",
|
|
tmp1, tmp));
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* NOTE! Last 4 bits of the reg I12 tell the chip revision.
|
|
* 0x01=RevB
|
|
* 0x0A=RevC. also CS4231/CS4231A and OPTi931
|
|
*/
|
|
|
|
printf("mss_detect - chip revision 0x%02x\n", tmp & 0x0f);
|
|
|
|
/*
|
|
* The original AD1848/CS4248 has just 16 indirect registers. This
|
|
* means that I0 and I16 should return the same value (etc.). Ensure
|
|
* that the Mode2 enable bit of I12 is 0. Otherwise this test fails
|
|
* with new parts.
|
|
*/
|
|
|
|
ad_write(d, 12, 0); /* Mode2=disabled */
|
|
|
|
for (i = 0; i < 16; i++)
|
|
if ((tmp1 = ad_read(d, i)) != (tmp2 = ad_read(d, i + 16))) {
|
|
DDB(printf("mss_detect warning - I%d: 0x%02x/0x%02x\n",
|
|
i, tmp1, tmp2));
|
|
/*
|
|
* note - this seems to fail on the 4232 on I11. So we just break
|
|
* rather than fail.
|
|
*/
|
|
break ; /* return 0; */
|
|
}
|
|
/*
|
|
* Try to switch the chip to mode2 (CS4231) by setting the MODE2 bit
|
|
* (0x40). The bit 0x80 is always 1 in CS4248 and CS4231.
|
|
*
|
|
* On the OPTi931, however, I12 is readonly and only contains the
|
|
* chip revision ID (as in the CS4231A). The upper bits return 0.
|
|
*/
|
|
|
|
ad_write(d, 12, 0x40); /* Set mode2, clear 0x80 */
|
|
|
|
tmp1 = ad_read(d, 12);
|
|
if (tmp1 & 0x80) {
|
|
name = "CS4248" ; /* Our best knowledge just now */
|
|
}
|
|
if ((tmp1 & 0xf0) == 0x00) {
|
|
printf("this should be an OPTi931\n");
|
|
} else if ((tmp1 & 0xc0) == 0xC0) {
|
|
/*
|
|
* The 4231 has bit7=1 always, and bit6 we just set to 1.
|
|
* We want to check that this is really a CS4231
|
|
* Verify that setting I0 doesn't change I16.
|
|
*/
|
|
ad_write(d, 16, 0); /* Set I16 to known value */
|
|
|
|
ad_write(d, 0, 0x45);
|
|
if ((tmp1 = ad_read(d, 16)) != 0x45) { /* No change -> CS4231? */
|
|
|
|
ad_write(d, 0, 0xaa);
|
|
if ((tmp1 = ad_read(d, 16)) == 0xaa) { /* Rotten bits? */
|
|
DDB(printf("mss_detect error - step H(%x)\n", tmp1));
|
|
return 0;
|
|
}
|
|
/*
|
|
* Verify that some bits of I25 are read only.
|
|
*/
|
|
|
|
DDB(printf("mss_detect() - step I\n"));
|
|
tmp1 = ad_read(d, 25); /* Original bits */
|
|
ad_write(d, 25, ~tmp1); /* Invert all bits */
|
|
if ((ad_read(d, 25) & 0xe7) == (tmp1 & 0xe7)) {
|
|
int id;
|
|
|
|
/*
|
|
* It's at least CS4231
|
|
*/
|
|
name = "CS4231" ;
|
|
d->bd_id = MD_CS4231;
|
|
|
|
/*
|
|
* It could be an AD1845 or CS4231A as well.
|
|
* CS4231 and AD1845 report the same revision info in I25
|
|
* while the CS4231A reports different.
|
|
*/
|
|
|
|
id = ad_read(d, 25) & 0xe7;
|
|
/*
|
|
* b7-b5 = version number;
|
|
* 100 : all CS4231
|
|
* 101 : CS4231A
|
|
*
|
|
* b2-b0 = chip id;
|
|
*/
|
|
switch (id) {
|
|
|
|
case 0xa0:
|
|
name = "CS4231A" ;
|
|
d->bd_id = MD_CS4231A;
|
|
break;
|
|
|
|
case 0xa2:
|
|
name = "CS4232" ;
|
|
d->bd_id = MD_CS4232;
|
|
break;
|
|
|
|
case 0xb2:
|
|
/* strange: the 4231 data sheet says b4-b3 are XX
|
|
* so this should be the same as 0xa2
|
|
*/
|
|
name = "CS4232A" ;
|
|
d->bd_id = MD_CS4232A;
|
|
break;
|
|
|
|
case 0x80:
|
|
/*
|
|
* It must be a CS4231 or AD1845. The register I23
|
|
* of CS4231 is undefined and it appears to be read
|
|
* only. AD1845 uses I23 for setting sample rate.
|
|
* Assume the chip is AD1845 if I23 is changeable.
|
|
*/
|
|
|
|
tmp = ad_read(d, 23);
|
|
|
|
ad_write(d, 23, ~tmp);
|
|
if (ad_read(d, 23) != tmp) { /* AD1845 ? */
|
|
name = "AD1845" ;
|
|
d->bd_id = MD_AD1845;
|
|
}
|
|
ad_write(d, 23, tmp); /* Restore */
|
|
break;
|
|
|
|
case 0x83: /* CS4236 */
|
|
name = "CS4236";
|
|
d->bd_id = MD_CS4236;
|
|
break ;
|
|
|
|
default: /* Assume CS4231 */
|
|
printf("unknown id 0x%02x, assuming CS4231\n", id);
|
|
d->bd_id = MD_CS4231;
|
|
|
|
}
|
|
}
|
|
ad_write(d, 25, tmp1); /* Restore bits */
|
|
|
|
}
|
|
}
|
|
DDB(printf("mss_detect() - Detected %s\n", name));
|
|
strcpy(d->name, name);
|
|
dev->id_flags &= ~DV_F_DEV_MASK ;
|
|
dev->id_flags |= (d->bd_id << DV_F_DEV_SHIFT) & DV_F_DEV_MASK ;
|
|
return 1;
|
|
}
|
|
|
|
|
|
/*
|
|
* mss_reinit resets registers of the codec
|
|
*/
|
|
static void
|
|
mss_reinit(snddev_info *d)
|
|
{
|
|
u_char r;
|
|
|
|
r = mss_speed(d) ;
|
|
r |= (mss_format(d) << 5) ;
|
|
if (d->flags & SND_F_STEREO)
|
|
r |= 0x10 ;
|
|
/* XXX check if MCE is necessary... */
|
|
ad_enter_MCE(d);
|
|
|
|
/*
|
|
* perhaps this is not the place to set mode2, should be done
|
|
* only once at attach time...
|
|
*/
|
|
if ( d->dma1 != d->dma2 && d->bd_id != MD_OPTI931)
|
|
/*
|
|
* set mode2 bit for dual dma op. This bit is not implemented
|
|
* on the OPTi931
|
|
*/
|
|
ad_write(d, 12, ad_read(d, 12) | 0x40 /* mode 2 on the CS42xx */ );
|
|
|
|
/*
|
|
* XXX this should really go into mss-speed...
|
|
*/
|
|
if (d->bd_id == MD_AD1845) { /* Use alternate speed select regs */
|
|
r &= 0xf0; /* Mask off the rate select bits */
|
|
|
|
ad_write(d, 22, (d->play_speed >> 8) & 0xff); /* Speed MSB */
|
|
ad_write(d, 23, d->play_speed & 0xff); /* Speed LSB */
|
|
/*
|
|
* XXX must also do something in I27 for the ad1845
|
|
*/
|
|
}
|
|
|
|
ad_write(d, 8, r) ;
|
|
if (d->dma1 != d->dma2) {
|
|
ad_write(d, 28, r & 0xf0 ) ; /* capture mode */
|
|
ad_write(d, 9, 0 /* no capture, no playback, dual dma */) ;
|
|
} else
|
|
ad_write(d, 9, 4 /* no capture, no playback, single dma */) ;
|
|
ad_leave_MCE(d);
|
|
ad_write_cnt(d, 14, 0 ); /* playback count */
|
|
if (d->dma1 != d->dma2)
|
|
ad_write_cnt(d, 30, 0 ); /* rec. count on dual dma */
|
|
|
|
ad_write(d, 10, 2 /* int enable */) ;
|
|
outb(io_Status(d), 0); /* Clear interrupt status */
|
|
/* the following seem required on the CS4232 */
|
|
ad_write(d, 6, ad_read(d,6) & ~I6_MUTE);
|
|
ad_write(d, 7, ad_read(d,7) & ~I6_MUTE);
|
|
|
|
snd_set_blocksize(d); /* update blocksize if user did not force it */
|
|
}
|
|
|
|
/*
|
|
* here we have support for PnP cards
|
|
*
|
|
*/
|
|
|
|
#if NPNP > 0
|
|
|
|
static char * cs4236_probe(u_long csn, u_long vend_id);
|
|
static void cs4236_attach(u_long csn, u_long vend_id, char *name,
|
|
struct isa_device *dev);
|
|
|
|
static struct pnp_device cs4236 = {
|
|
"cs423x",
|
|
cs4236_probe,
|
|
cs4236_attach,
|
|
&nsnd, /* use this for all sound cards */
|
|
&tty_imask /* imask */
|
|
};
|
|
DATA_SET (pnpdevice_set, cs4236);
|
|
|
|
static char *
|
|
cs4236_probe(u_long csn, u_long vend_id)
|
|
{
|
|
char *s = NULL ;
|
|
if (vend_id == 0x3742630e)
|
|
s = "CS4237" ;
|
|
else if (vend_id == 0x3642630e)
|
|
s = "CS4236" ;
|
|
else if (vend_id == 0x3242630e)
|
|
s = "CS4232" ;
|
|
if (s) {
|
|
struct pnp_cinfo d;
|
|
read_pnp_parms(&d, 0);
|
|
if (d.enable == 0) {
|
|
printf("This is a %s, but LDN 0 is disabled\n", s);
|
|
return NULL ;
|
|
}
|
|
return s;
|
|
}
|
|
|
|
return NULL ;
|
|
}
|
|
|
|
extern snddev_info sb_op_desc;
|
|
|
|
static void
|
|
cs4236_attach(u_long csn, u_long vend_id, char *name,
|
|
struct isa_device *dev)
|
|
{
|
|
struct pnp_cinfo d ;
|
|
snddev_info tmp_d ; /* patched copy of the basic snddev_info */
|
|
int ldn = 0 ;
|
|
|
|
if (read_pnp_parms ( &d , ldn ) == 0 ) {
|
|
printf("failed to read pnp parms\n");
|
|
return ;
|
|
}
|
|
snddev_last_probed = &tmp_d;
|
|
if (d.flags & DV_PNP_SBCODEC) {
|
|
printf("CS423x use sb-compatible codec\n");
|
|
dev->id_iobase = d.port[2] ;
|
|
tmp_d = sb_op_desc ;
|
|
tmp_d.alt_base = d.port[0] - 4;
|
|
d.drq[1] = 4 ; /* disable, it is not used ... */
|
|
} else {
|
|
/* mss-compatible codec */
|
|
dev->id_iobase = d.port[0] -4 ; /* XXX old mss have 4 bytes before... */
|
|
tmp_d = mss_op_desc ;
|
|
tmp_d.bd_id = MD_CS4232 ; /* to short-circuit the detect routine */
|
|
tmp_d.alt_base = d.port[2];
|
|
strcpy(tmp_d.name, name);
|
|
tmp_d.audio_fmt |= AFMT_FULLDUPLEX ;
|
|
}
|
|
write_pnp_parms( &d, ldn );
|
|
enable_pnp_card();
|
|
|
|
dev->id_drq = d.drq[0] ; /* primary dma */
|
|
dev->id_irq = (1 << d.irq[0] ) ;
|
|
dev->id_intr = pcmintr ;
|
|
dev->id_flags = DV_F_DUAL_DMA | (d.drq[1] ) ;
|
|
|
|
pcmattach(dev);
|
|
}
|
|
|
|
static char *opti931_probe(u_long csn, u_long vend_id);
|
|
static void opti931_attach(u_long csn, u_long vend_id, char *name,
|
|
struct isa_device *dev);
|
|
static struct pnp_device opti931 = {
|
|
"OPTi931",
|
|
opti931_probe,
|
|
opti931_attach,
|
|
&nsnd, /* use this for all sound cards */
|
|
&tty_imask /* imask */
|
|
};
|
|
DATA_SET (pnpdevice_set, opti931);
|
|
|
|
static char *
|
|
opti931_probe(u_long csn, u_long vend_id)
|
|
{
|
|
if (vend_id == 0x3109143e) {
|
|
struct pnp_cinfo d;
|
|
read_pnp_parms(&d, 1);
|
|
if (d.enable == 0) {
|
|
printf("This is an OPTi931, but LDN 1 is disabled\n");
|
|
return NULL ;
|
|
}
|
|
return "OPTi931" ;
|
|
}
|
|
return NULL ;
|
|
}
|
|
|
|
static void
|
|
opti931_attach(u_long csn, u_long vend_id, char *name,
|
|
struct isa_device *dev)
|
|
{
|
|
struct pnp_cinfo d ;
|
|
snddev_info tmp_d ; /* patched copy of the basic snddev_info */
|
|
int p;
|
|
|
|
read_pnp_parms ( &d , 3 ); /* free resources taken by LDN 3 */
|
|
d.irq[0]=0; /* free irq... */
|
|
d.port[0]=0; /* free address... */
|
|
d.enable = 0 ;
|
|
write_pnp_parms ( &d , 3 );
|
|
|
|
read_pnp_parms ( &d , 2 ); /* disable LDN 2 */
|
|
d.enable = 0 ;
|
|
write_pnp_parms ( &d , 2 );
|
|
|
|
read_pnp_parms ( &d , 1 ) ;
|
|
write_pnp_parms( &d, 1 );
|
|
enable_pnp_card();
|
|
|
|
snddev_last_probed = &tmp_d;
|
|
tmp_d = d.flags & DV_PNP_SBCODEC ? sb_op_desc : mss_op_desc ;
|
|
|
|
strcpy(tmp_d.name, name);
|
|
|
|
/*
|
|
* My MED3931 v.1.0 allocates 3 bytes for the config space,
|
|
* whereas v.2.0 allocates 4 bytes. What I know for sure is that the
|
|
* upper two ports must be used, and they should end on a boundary
|
|
* of 4 bytes. So I need the following trick...
|
|
*/
|
|
p = tmp_d.conf_base = (d.port[3] & ~3) + 2; /* config port */
|
|
|
|
/*
|
|
* now set default values for both modes.
|
|
*/
|
|
dev->id_iobase = d.port[0] - 4 ; /* old mss have 4 bytes before... */
|
|
tmp_d.io_base = dev->id_iobase; /* needed for ad_write to work... */
|
|
tmp_d.alt_base = d.port[2];
|
|
opti_write(p, 4, 0x56 /* fifo 1/2, OPL3, audio enable, SB3.2 */ );
|
|
ad_write (&tmp_d, 10, 2); /* enable interrupts */
|
|
|
|
if (d.flags & DV_PNP_SBCODEC) { /* sb-compatible codec */
|
|
/*
|
|
* the 931 is not a real SB, it has important pieces of
|
|
* hardware controlled by both the WSS and the SB port...
|
|
*/
|
|
printf("--- opti931 in sb mode ---\n");
|
|
opti_write(p, 6, 1); /* MCIR6 wss disable, sb enable */
|
|
/*
|
|
* swap the main and alternate iobase address since we want
|
|
* to work in sb mode.
|
|
*/
|
|
dev->id_iobase = d.port[2] ;
|
|
tmp_d.alt_base = d.port[0] - 4;
|
|
dev->id_flags = DV_F_DUAL_DMA | d.drq[1] ;
|
|
} else { /* mss-compatible codec */
|
|
tmp_d.bd_id = MD_OPTI931 ; /* to short-circuit the detect routine */
|
|
opti_write(p, 6 , 2); /* MCIR6: wss enable, sb disable */
|
|
opti_write(p, 5, 0x28); /* MCIR5: codec in exp. mode,fifo */
|
|
dev->id_flags = DV_F_DUAL_DMA | d.drq[1] ;
|
|
tmp_d.audio_fmt |= AFMT_FULLDUPLEX ; /* not really well... */
|
|
tmp_d.isr = opti931_intr;
|
|
}
|
|
dev->id_drq = d.drq[0] ; /* primary dma */
|
|
dev->id_irq = (1 << d.irq[0] ) ;
|
|
dev->id_intr = pcmintr ;
|
|
pcmattach(dev);
|
|
}
|
|
|
|
static char *guspnp_probe(u_long csn, u_long vend_id);
|
|
static void guspnp_attach(u_long csn, u_long vend_id, char *name,
|
|
struct isa_device *dev);
|
|
static struct pnp_device guspnp = {
|
|
"GusPnP",
|
|
guspnp_probe,
|
|
guspnp_attach,
|
|
&nsnd, /* use this for all sound cards */
|
|
&tty_imask /* imask */
|
|
};
|
|
DATA_SET (pnpdevice_set, guspnp);
|
|
|
|
static char *
|
|
guspnp_probe(u_long csn, u_long vend_id)
|
|
{
|
|
if (vend_id == 0x0100561e) {
|
|
struct pnp_cinfo d;
|
|
read_pnp_parms(&d, 0);
|
|
if (d.enable == 0) {
|
|
printf("This is a GusPnP, but LDN 0 is disabled\n");
|
|
return NULL ;
|
|
}
|
|
return "GusPnP" ;
|
|
}
|
|
return NULL ;
|
|
}
|
|
|
|
static void
|
|
guspnp_attach(u_long csn, u_long vend_id, char *name,
|
|
struct isa_device *dev)
|
|
{
|
|
struct pnp_cinfo d ;
|
|
snddev_info tmp_d ; /* patched copy of the basic snddev_info */
|
|
|
|
read_pnp_parms ( &d , 0 ) ;
|
|
write_pnp_parms ( &d , 0 );
|
|
enable_pnp_card();
|
|
|
|
tmp_d = mss_op_desc ;
|
|
snddev_last_probed = &tmp_d;
|
|
|
|
dev->id_iobase = d.port[2] - 4 ; /* room for 4 mss registers */
|
|
dev->id_drq = d.drq[0] ; /* primary dma */
|
|
dev->id_irq = (1 << d.irq[0] ) ;
|
|
dev->id_intr = pcmintr ;
|
|
dev->id_flags = DV_F_DUAL_DMA | d.drq[1] ;
|
|
|
|
tmp_d.alt_base = d.port[0];
|
|
|
|
pcmattach(dev);
|
|
}
|
|
#endif /* NPNP > 0 */
|
|
#endif /* NPCM > 0 */
|