be6cf145be
This is influenced by the ath3k driver from linux (circa 2013, this is how long I've been sitting on this.) It handles loading in firmware using the newer model, where it assembles the right set of firmware blobs and board configuration based on the device list and querying the device. The older utility could only load in a single image - which sometimes was ath3k-1.fw and sometimes was ath3k-2.fw. However, the ath3k maintainers didn't want to keep adding in binaries that were just derivatives with a separate board config, so they deleted ath3k-2.fw from the Linux firmware repository and instead, well, did this. Now, this has been tested against AR3011 and AR3012 NICs from the AR9285+BT combo up through to the QCA9565+BT combo. It doesn't yet work with the QCAFN222 NIC as that is some newer chip. The firmware can be grabbed from https://github.com/erikarn/ath3kfw/ in the share/firmware/ath3k directory. I'll update this utility over time to support the newer firmware drops (newer than mid-2013) which should pull in the QCNFA222 and subsequent chips. Tested: * AR9285 + BT * AR9287 + BT * AR9485 + BT * AR9462 + BT * QCA9565 + BT
67 lines
2.6 KiB
C
67 lines
2.6 KiB
C
/*-
|
|
* Copyright (c) 2013 Adrian Chadd <adrian@freebsd.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer,
|
|
* without modification.
|
|
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
|
|
* similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
|
|
* redistribution must be conditioned upon including a substantially
|
|
* similar Disclaimer requirement for further binary redistribution.
|
|
*
|
|
* NO WARRANTY
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
|
|
* AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
|
|
* THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
|
|
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
|
|
* IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGES.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
#ifndef __ATH3K_HW_H__
|
|
#define __ATH3K_HW_H__
|
|
|
|
#define ATH3K_DNLOAD 0x01
|
|
#define ATH3K_GETSTATE 0x05
|
|
#define ATH3K_SET_NORMAL_MODE 0x07
|
|
#define ATH3K_GETVERSION 0x09
|
|
#define USB_REG_SWITCH_VID_PID 0x0a
|
|
|
|
#define ATH3K_MODE_MASK 0x3F
|
|
#define ATH3K_NORMAL_MODE 0x0E
|
|
|
|
#define ATH3K_PATCH_UPDATE 0x80
|
|
#define ATH3K_SYSCFG_UPDATE 0x40
|
|
|
|
#define ATH3K_XTAL_FREQ_26M 0x00
|
|
#define ATH3K_XTAL_FREQ_40M 0x01
|
|
#define ATH3K_XTAL_FREQ_19P2 0x02
|
|
#define ATH3K_NAME_LEN 0xFF
|
|
|
|
#define USB_REQ_DFU_DNLOAD 1
|
|
#define BULK_SIZE 4096
|
|
#define FW_HDR_SIZE 20
|
|
|
|
extern int ath3k_load_fwfile(struct libusb_device_handle *hdl,
|
|
const struct ath3k_firmware *fw);
|
|
extern int ath3k_get_state(struct libusb_device_handle *hdl,
|
|
unsigned char *state);
|
|
extern int ath3k_get_version(struct libusb_device_handle *hdl,
|
|
struct ath3k_version *version);
|
|
extern int ath3k_load_patch(libusb_device_handle *hdl, const char *fw_path);
|
|
extern int ath3k_load_syscfg(libusb_device_handle *hdl, const char *fw_path);
|
|
extern int ath3k_set_normal_mode(libusb_device_handle *hdl);
|
|
extern int ath3k_switch_pid(libusb_device_handle *hdl);
|
|
|
|
#endif
|