freebsd-skq/sys/dev/hme/if_hmevar.h
Marius Strobl da28723ecd o Disable HMEDEBUG by default.
o Add CTASSERTs ensuring that HME_NRXDESC and HME_NTXDESC are set to
  legal values.
o Use appropriate maxsize, nsegments and maxsegsize parameters when
  creating DMA tags and correct some comments related to them.
o The FreeBSD bus_dmamap_sync(9) supports ored together flags for quite
  some time now so collapse calls accordingly.
o Add missing BUS_DMASYNC_PREREAD when syncing the control DMA maps in
  hme_rint() and hme_start_locked().
o Keep state of the link state and use it to enable or disable the MAC
  in hme_mii_statchg() accordingly as well as to return early from
  hme_start_locked() in case the link is down.
o Introduce a sc_flags and use it to replace individual members like
  sc_pci.
o Add bus_barrier(9) calls to hme_mac_bitflip(), hme_mii_readreg(),
  hme_mii_writereg() and hme_stop() to ensure the respective bit
  has been written before we starting polling on it and for the right
  bits to change.
o Rather just returning in case hme_mac_bitflip() fails and leaving us
  in an undefined state report the problem and move on; chances are
  the requested configuration will become active shortly after.
o Don't call hme_start_locked() in hme_init_locked() unconditionally
  but only after calls to hme_init_locked() when it's appropriate, i.e.
  in hme_watchdog().
o Add a KASSERT which asserts nsegs is valid also to hme_load_txmbuf().
o In hme_load_txmbuf():
  - use a maximum of the newly introduced HME_NTXSEGS segments instead
    of the incorrect HME_NTXQ, which reflects the maximum TX queue
    length, for loading the mbufs and put the DMA segments back onto
    the stack instead of the softc as 16 should be ok there.
  - use the common errno(2) return values instead of homegrown ones,
  - given that hme_load_txmbuf() is allowed to fail resulting in a
    packet drop for quite some time now implement the functionality of
    hme_txcksum() by means of m_pullup(9), which de-obfuscates the code
    and allows to always retrieve the correct length of the IP header, [1]
  - also add a KASSERT which asserts nsegs is valid,
  - take advantage of m_collapse(9) instead of m_defrag(9) for
    performance reasons.
o Don't bother to check whether the interface is running or whether its
  queue is empty before calling hme_start_locked() in hme_tint(), the
  former will check these anyway.
o In hme_intr() call hme_rint() before hme_tint() as gem_tint() may
  take quite a while to return when it calls hme_start_locked().
o Get rid of sc_debug and just check if_flags for IFF_DEBUG directly.
o Add a shadow sc_ifflags so we don't reset the chip when unnecessary.
o Handle IFF_ALLMULTI correctly. [2]
o Use PCIR_BAR instead of a homegrown macro.
o Replace sc_enaddr[6] with sc_enaddr[ETHER_ADDR_LEN].
o Use the maximum of 256 TX descriptors for better performance as using
  all of them has no additional static cost rather than using just half
  of them.

Reported by:	rwatson [2]
Suggested by:	yongari [1]
Reviewed by:	yongari
MFC after:	1 month
2008-04-24 23:12:03 +00:00

166 lines
5.8 KiB
C

/*-
* Copyright (c) 1999 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Paul Kranenburg.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* from: NetBSD: hmevar.h,v 1.5 2000/06/25 01:10:04 eeh Exp
*
* $FreeBSD$
*/
#include <sys/callout.h>
/*
* Number of receive and transmit descriptors. For each receive descriptor,
* an mbuf cluster is allocated and set up to receive a packet, and a dma map
* is created. Therefore, this number should not be too high to not waste
* memory.
* TX descriptors have no static cost, except for the memory directly allocated
* for them. TX queue elements (the number of which is fixed by HME_NTXQ) hold
* the software state for a transmit job; each has a dmamap allocated for it.
* There may be multiple descriptors allocated to a single queue element.
* HME_NTXQ and HME_NTXSEGS are completely arbitrary.
*/
#define HME_NRXDESC 128
#define HME_NTXDESC 256
#define HME_NTXQ 64
#define HME_NTXSEGS 16
/* Maximum size of a mapped RX buffer. */
#define HME_BUFSZ 1600
/*
* RX DMA descriptor. The descriptors are preallocated; the dma map is
* reused.
*/
struct hme_rxdesc {
struct mbuf *hrx_m;
bus_dmamap_t hrx_dmamap;
};
/* Lazily leave at least one burst size grace space. */
#define HME_DESC_RXLEN(sc, d) \
ulmin(HME_BUFSZ, (d)->hrx_m->m_len - (sc)->sc_burst)
struct hme_txdesc {
struct mbuf *htx_m;
bus_dmamap_t htx_dmamap;
int htx_lastdesc;
STAILQ_ENTRY(hme_txdesc) htx_q;
};
STAILQ_HEAD(hme_txdq, hme_txdesc);
struct hme_ring {
/* Ring Descriptors */
caddr_t rb_membase; /* Packet buffer: CPU address */
bus_addr_t rb_dmabase; /* Packet buffer: DMA address */
caddr_t rb_txd; /* Transmit descriptors */
bus_addr_t rb_txddma; /* DMA address of same */
caddr_t rb_rxd; /* Receive descriptors */
bus_addr_t rb_rxddma; /* DMA address of same */
/* Ring Descriptor state */
int rb_tdhead, rb_tdtail;
int rb_rdtail;
int rb_td_nbusy;
/* Descriptors */
struct hme_rxdesc rb_rxdesc[HME_NRXDESC];
struct hme_txdesc rb_txdesc[HME_NTXQ];
struct hme_txdq rb_txfreeq;
struct hme_txdq rb_txbusyq;
bus_dmamap_t rb_spare_dmamap;
};
struct hme_softc {
struct ifnet *sc_ifp;
struct ifmedia sc_ifmedia;
device_t sc_dev;
device_t sc_miibus;
struct mii_data *sc_mii; /* MII media control */
u_char sc_enaddr[ETHER_ADDR_LEN];
struct callout sc_tick_ch; /* tick callout */
int sc_wdog_timer; /* watchdog timer */
/* The following bus handles are to be provided by the bus front-end */
bus_dma_tag_t sc_pdmatag; /* bus dma parent tag */
bus_dma_tag_t sc_cdmatag; /* control bus dma tag */
bus_dmamap_t sc_cdmamap; /* control bus dma handle */
bus_dma_tag_t sc_rdmatag; /* RX bus dma tag */
bus_dma_tag_t sc_tdmatag; /* RX bus dma tag */
bus_space_handle_t sc_sebh; /* HME Global registers */
bus_space_handle_t sc_erxh; /* HME ERX registers */
bus_space_handle_t sc_etxh; /* HME ETX registers */
bus_space_handle_t sc_mach; /* HME MAC registers */
bus_space_handle_t sc_mifh; /* HME MIF registers */
bus_space_tag_t sc_sebt; /* HME Global registers */
bus_space_tag_t sc_erxt; /* HME ERX registers */
bus_space_tag_t sc_etxt; /* HME ETX registers */
bus_space_tag_t sc_mact; /* HME MAC registers */
bus_space_tag_t sc_mift; /* HME MIF registers */
int sc_burst; /* DVMA burst size in effect */
int sc_phys[2]; /* MII instance -> PHY map */
u_int sc_flags;
#define HME_LINK (1 << 0) /* link is up */
#define HME_PCI (1 << 1) /* PCI busses are little-endian */
int sc_ifflags;
int sc_csum_features;
/* Ring descriptor */
struct hme_ring sc_rb;
struct mtx sc_lock;
};
#define HME_LOCK(_sc) mtx_lock(&(_sc)->sc_lock)
#define HME_UNLOCK(_sc) mtx_unlock(&(_sc)->sc_lock)
#define HME_LOCK_ASSERT(_sc, _what) mtx_assert(&(_sc)->sc_lock, (_what))
extern devclass_t hme_devclass;
int hme_config(struct hme_softc *);
void hme_detach(struct hme_softc *);
void hme_suspend(struct hme_softc *);
void hme_resume(struct hme_softc *);
void hme_intr(void *);
/* MII methods & callbacks */
int hme_mii_readreg(device_t, int, int);
int hme_mii_writereg(device_t, int, int, int);
void hme_mii_statchg(device_t);