freebsd kernel with SKQ
Go to file
marius 546690b392 All of Oxford/PLX OX16PCI954, OXm16PCI954 and OXu16PCI954 share the
exact same (subsystem) device and vendor IDs. However, the reference
design for the OXu16PCI954 uses a 14.7456 MHz clock (as does the EXSYS
EX-41098-2 equipped with these), while at least the OX16PCI954 defaults
to a 1.8432 MHz one. According to the datasheets of these chips, the
only difference in PCI configuration space is that OXu16PCI954 have
a revision ID of 1 while the other two are at 0. So employ the latter
for determining the default clock rates of this family.
Note that one might think that the actual clock could be derived from
the Clock Prescaler Register (CPR) of these chips. Unfortunately, this
is not that case and its use and content are orthogonal to the frequency
of the crystal employed.
Tested with an EXSYS EX-41098-2, which identifies and attaches as:
pcib4@pci0:19:0:0:      class=0x060400 card=0x02dd1014 chip=0x10801b21
rev=0x03 hdr=0x01
    vendor     = 'ASMedia Technology Inc.'
    device     = 'ASM1083/1085 PCIe to PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
puc0@pci0:20:4:0:       class=0x070006 card=0x00001415 chip=0x95011415
rev=0x01 hdr=0x00
    vendor     = 'Oxford Semiconductor Ltd'
    device     = 'OX16PCI954 (Quad 16950 UART) function 0 (Uart)'
    class      = simple comms
    subclass   = UART
puc1@pci0:20:4:1:       class=0x068000 card=0x00001415 chip=0x95111415
rev=0x01 hdr=0x00
    vendor     = 'Oxford Semiconductor Ltd'
    device     = 'OX16PCI954 (Quad 16950 UART) function 1 (8bit bus)'
    class      = bridge
puc2@pci0:20:8:0:       class=0x070006 card=0x00001415 chip=0x95011415
rev=0x01 hdr=0x00
    vendor     = 'Oxford Semiconductor Ltd'
    device     = 'OX16PCI954 (Quad 16950 UART) function 0 (Uart)'
    class      = simple comms
    subclass   = UART
puc3@pci0:20:8:1:       class=0x068000 card=0x00001415 chip=0x95111415
rev=0x01 hdr=0x00
    vendor     = 'Oxford Semiconductor Ltd'
    device     = 'OX16PCI954 (Quad 16950 UART) function 1 (8bit bus)'
    class      = bridge

pci20: <ACPI PCI bus> on pcib4
puc0: <Oxford Semiconductor OX16PCI954 UARTs> port 0x5000-0x501f,
0x5020-0x503f mem 0xc6000000-0xc6000fff,0xc6001000-0xc6001fff irq 16 at
device 4.0 on pci20
uart1: <16950 or compatible> at port 1 on puc0
uart2: <16950 or compatible> at port 2 on puc0
uart3: <16950 or compatible> at port 3 on puc0
uart4: <16950 or compatible> at port 4 on puc0
puc1: <Oxford Semiconductor OX9160/OX16PCI954 UARTs (function 1)> port
0x5040-0x505f,0x5060-0x507f mem 0xc6002000-0xc6002fff,0xc6003000-0xc6003fff
irq 16 at device 4.1 on pci20
puc2: <Oxford Semiconductor OX16PCI954 UARTs> port 0x5080-0x509f,
0x50a0-0x50bf mem 0xc6004000-0xc6004fff,0xc6005000-0xc6005fff irq 16 at
device 8.0 on pci20
uart5: <16950 or compatible> at port 1 on puc2
uart6: <16950 or compatible> at port 2 on puc2
uart7: <16950 or compatible> at port 3 on puc2
uart8: <16950 or compatible> at port 4 on puc2
puc3: <Oxford Semiconductor OX9160/OX16PCI954 UARTs (function 1)> port
0x50c0-0x50df,0x50e0-0x50ff mem 0xc6006000-0xc6006fff,0xc6007000-0xc6007fff
irq 16 at device 8.1 on pci20

MFC after:	2 weeks
2013-06-13 22:13:41 +00:00
bin sleep: Explain in a comment why the [EINTR] check is there. 2013-06-05 20:15:18 +00:00
cddl MFV r251644: 2013-06-12 07:07:06 +00:00
contrib Handle DW_TAG_unspecified_type 2013-06-12 20:11:49 +00:00
crypto Revert a local change that sets the default for UsePrivilegeSeparation to 2013-05-29 00:19:58 +00:00
etc Clean up swapfile memory disk on shutdown 2013-06-12 16:44:17 +00:00
games Remove a reference to instant-server which has been removed from the 2013-03-21 12:42:25 +00:00
gnu Add a new knob WITH_DEBUG_FILES to control the building of standalone 2013-06-07 21:40:02 +00:00
include Vendor import of clang tags/RELEASE_33/final r183502 (effectively, 3.3 2013-06-10 20:45:12 +00:00
kerberos5 Fix the getpwnam_r() call in the pname_to_uid() kerberos library function so 2013-05-02 12:52:49 +00:00
lib Renumber clauses to reduce diffs to other versions 2013-06-13 00:19:30 +00:00
libexec Add the name of the file that could not be opened to the error message 2013-06-11 18:46:46 +00:00
release Add new script to run release builds. The script is heavily based upon 2013-06-12 13:15:28 +00:00
rescue Add less to rescue build. On amd64, this increases rescue size by about 2013-05-13 22:16:33 +00:00
sbin Fix build after r251654. 2013-06-12 19:21:23 +00:00
secure Remove references to MK_IDEA. 2013-04-27 05:44:39 +00:00
share Add a missing comma. 2013-06-13 18:33:54 +00:00
sys All of Oxford/PLX OX16PCI954, OXm16PCI954 and OXu16PCI954 share the 2013-06-13 22:13:41 +00:00
tools Use portable string comparison 2013-06-13 13:05:08 +00:00
usr.bin Revert revision 251648. style(9) requires an empty line here. 2013-06-13 04:11:21 +00:00
usr.sbin Make the default choice for FTP media access use "auto". 2013-06-11 03:37:29 +00:00
COPYRIGHT Happy New Year 2013! 2012-12-31 11:22:55 +00:00
LOCKS Test commit to make sure commit mail works after moving the server. 2012-12-29 16:03:23 +00:00
MAINTAINERS Use my @freebsd.org username, rather than ${WORK} username. 2013-05-18 14:05:32 +00:00
Makefile bmake does not like universe_${target}_prologue in the .ORDER 2013-06-03 23:51:46 +00:00
Makefile.inc1 Be more agressive about bootstrapping ctfmerge and ctfconvert so 2013-06-13 18:26:04 +00:00
ObsoleteFiles.inc Move libmd.so.5 to the proper place and add missing lib32 entry. 2013-05-26 09:25:14 +00:00
README
UPDATING Explain remedy for -J error from old make 2013-06-13 18:39:17 +00:00

This is the top level of the FreeBSD source directory.  This file
was last revised on:
$FreeBSD$

For copyright information, please see the file COPYRIGHT in this
directory (additional copyright information also exists for some
sources in this tree - please see the specific source directories for
more information).

The Makefile in this directory supports a number of targets for
building components (or all) of the FreeBSD source tree, the most
commonly used one being ``world'', which rebuilds and installs
everything in the FreeBSD system from the source tree except the
kernel, the kernel-modules and the contents of /etc.  The ``world''
target should only be used in cases where the source tree has not
changed from the currently running version.  See:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html
for more information, including setting make(1) variables.

The ``buildkernel'' and ``installkernel'' targets build and install
the kernel and the modules (see below).  Please see the top of
the Makefile in this directory for more information on the
standard build targets and compile-time flags.

Building a kernel is a somewhat more involved process, documentation
for which can be found at:
   http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html
And in the config(8) man page.
Note: If you want to build and install the kernel with the
``buildkernel'' and ``installkernel'' targets, you might need to build
world before.  More information is available in the handbook.

The sample kernel configuration files reside in the sys/<arch>/conf
sub-directory (assuming that you've installed the kernel sources), the
file named GENERIC being the one used to build your initial installation
kernel.  The file NOTES contains entries and documentation for all possible
devices, not just those commonly used.  It is the successor of the ancient
LINT file, but in contrast to LINT, it is not buildable as a kernel but a
pure reference and documentation file.


Source Roadmap:
---------------
bin		System/user commands.

cddl		Various commands and libraries under the Common Development
		and Distribution License.

contrib		Packages contributed by 3rd parties.

crypto		Cryptography stuff (see crypto/README).

etc		Template files for /etc.

games		Amusements.

gnu		Various commands and libraries under the GNU Public License.
		Please see gnu/COPYING* for more information.

include		System include files.

kerberos5	Kerberos5 (Heimdal) package.

lib		System libraries.

libexec		System daemons.

release		Release building Makefile & associated tools.

rescue		Build system for statically linked /rescue utilities.

sbin		System commands.

secure		Cryptographic libraries and commands.

share		Shared resources.

sys		Kernel sources.

tools		Utilities for regression testing and miscellaneous tasks.

usr.bin		User commands.

usr.sbin	System administration commands.


For information on synchronizing your source tree with one or more of
the FreeBSD Project's development branches, please see:

  http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/synching.html