d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
54dae90bed
freebsd-skq/cvmx-tra.h

412 lines
18 KiB
C
Raw Blame History

/***********************license start***************
* Copyright (c) 2003-2008 Cavium Networks (support@cavium.com). All rights
* reserved.
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
*
* * Neither the name of Cavium Networks nor the names of
* its contributors may be used to endorse or promote products
* derived from this software without specific prior written
* permission.
*
* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
* AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS
* OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH
* RESPECT TO THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY
* REPRESENTATION OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT
* DEFECTS, AND CAVIUM SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES
* OF TITLE, MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR
* PURPOSE, LACK OF VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET
* POSSESSION OR CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT
* OF USE OR PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
*
*
* For any questions regarding licensing please contact marketing@caviumnetworks.com
*
***********************license end**************************************/
/**
* @file
*
* Interface to the Trace buffer hardware.
*
* WRITING THE TRACE BUFFER
*
* When the trace is enabled, commands are traced continuously (wrapping) or until the buffer is filled once
* (no wrapping). Additionally and independent of wrapping, tracing can be temporarily enabled and disabled
* by the tracing triggers. All XMC commands can be traced except for IDLE and IOBRSP. The subset of XMC
* commands that are traced is determined by the filter and the two triggers, each of which is comprised of
* masks for command, sid, did, and address). If triggers are disabled, then only those commands matching
* the filter are traced. If triggers are enabled, then only those commands matching the filter, the start
* trigger, or the stop trigger are traced during the time between a start trigger and a stop trigger.
*
* For a given command, its XMC data is written immediately to the buffer. If the command has XMD data,
* then that data comes in-order at some later time. The XMD data is accumulated across all valid
* XMD cycles and written to the buffer or to a shallow fifo. Data from the fifo is written to the buffer
* as soon as it gets access to write the buffer (i.e. the buffer is not currently being written with XMC
* data). If the fifo overflows, it simply overwrites itself and the previous XMD data is lost.
*
*
* READING THE TRACE BUFFER
*
* Each entry of the trace buffer is read by a CSR read command. The trace buffer services each read in order,
* as soon as it has access to the (single-ported) trace buffer.
*
*
* OVERFLOW, UNDERFLOW AND THRESHOLD EVENTS
*
* The trace buffer maintains a write pointer and a read pointer and detects both the overflow and underflow
* conditions. Each time a new trace is enabled, both pointers are reset to entry 0. Normally, each write
* (traced event) increments the write pointer and each read increments the read pointer. During the overflow
* condition, writing (tracing) is disabled. Tracing will continue as soon as the overflow condition is
* resolved. The first entry that is written immediately following the overflow condition may be marked to
* indicate that a tracing discontinuity has occurred before this entry. During the underflow condition,
* reading does not increment the read pointer and the read data is marked to indicate that no read data is
* available.
*
* The full threshold events are defined to signal an interrupt a certain levels of "fullness" (1/2, 3/4, 4/4).
* "fullness" is defined as the relative distance between the write and read pointers (i.e. not defined as the
* absolute distance between the write pointer and entry 0). When enabled, the full threshold event occurs
* every time the desired level of "fullness" is achieved.
*
*
* Trace buffer entry format
* @verbatim
* 6 5 4 3 2 1 0
* 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:3] | 0 | src id | 0 | DWB | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:3] | 0 | src id | 0 | PL2 | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:3] | 0 | src id | 0 | PSL1 | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:3] | 0 | src id | 0 | LDD | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:3] | 0 | src id | 0 | LDI | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:3] | 0 | src id | 0 | LDT | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:3] | * or 16B mask | src id | 0 | STC | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:3] | * or 16B mask | src id | 0 | STF | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:3] | * or 16B mask | src id | 0 | STP | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:3] | * or 16B mask | src id | 0 | STT | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:0] | 0 | src id| dest id |IOBLD8 | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:1] | 0 | src id| dest id |IOBLD16| diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:2] | 0 | src id| dest id |IOBLD32| diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:3] | 0 | src id| dest id |IOBLD64| diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:3] | * or 16B mask | src id| dest id |IOBST | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| * or address[35:3] | * or length | src id| dest id |IOBDMA | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*
* notes:
* - Fields marked as '*' are first filled with '0' at XMC time and may be filled with real data later at XMD time. Note that the
* XMD write may be dropped if the shallow FIFO overflows which leaves the '*' fields as '0'.
* - 2 bits (sta) are used not to trace, but to return global state information with each read, encoded as follows:
* 0x0-0x1=not valid
* 0x2=valid, no discontinuity
* 0x3=valid, discontinuity
* - commands are encoded as follows:
* 0x0=DWB
* 0x1=PL2
* 0x2=PSL1
* 0x3=LDD
* 0x4=LDI
* 0x5=LDT
* 0x6=STC
* 0x7=STF
* 0x8=STP
* 0x9=STT
* 0xa=IOBLD8
* 0xb=IOBLD16
* 0xc=IOBLD32
* 0xd=IOBLD64
* 0xe=IOBST
* 0xf=IOBDMA
* - For non IOB* commands
* - source id is encoded as follows:
* 0x00-0x0f=PP[n]
* 0x10=IOB(Packet)
* 0x11=IOB(PKO)
* 0x12=IOB(ReqLoad, ReqStore)
* 0x13=IOB(DWB)
* 0x14-0x1e=illegal
* 0x1f=IOB(generic)
* - dest id is unused (can only be L2c)
* - For IOB* commands
* - source id is encoded as follows:
* 0x00-0x0f = PP[n]
* - dest id is encoded as follows:
* 0x00-0x0f=PP[n]
* 0x10=IOB(Packet)
* 0x11=IOB(PKO)
* 0x12=IOB(ReqLoad, ReqStore)
* 0x13=IOB(DWB)
* 0x14-0x1e=illegal
* 0x1f=IOB(generic)
*
* Source of data for each command
* command source id dest id address length/mask
* -------+------------+------------+-----------------------+----------------------------------------------
* LDI xmc_sid[8:3] x xmc_adr[35:3] x
* LDT xmc_sid[8:3] x xmc_adr[35:3] x
* STF xmc_sid[8:3] x xmc_adr[35:3] 16B mask(xmd_[wrval,eow,adr[6:4],wrmsk[15:0]])
* STC xmc_sid[8:3] x xmc_adr[35:3] 16B mask(xmd_[wrval,eow,adr[6:4],wrmsk[15:0]])
* STP xmc_sid[8:3] x xmc_adr[35:3] 16B mask(xmd_[wrval,eow,adr[6:4],wrmsk[15:0]])
* STT xmc_sid[8:3] x xmc_adr[35:3] 16B mask(xmd_[wrval,eow,adr[6:4],wrmsk[15:0]])
* DWB xmc_sid[8:3] x xmc_adr[35:3] x
* PL2 xmc_sid[8:3] x xmc_adr[35:3] x
* PSL1 xmc_sid[8:3] x xmc_adr[35:3] x
* IOBLD8 xmc_sid[8:3] xmc_did[8:3] xmc_adr[35:0] x
* IOBLD16 xmc_sid[8:3] xmc_did[8:3] xmc_adr[35:1] x
* IOBLD32 xmc_sid[8:3] xmc_did[8:3] xmc_adr[35:2] x
* IOBLD64 xmc_sid[8:3] xmc_did[8:3] xmc_adr[35:3] x
* IOBST xmc_sid[8:3] xmc_did[8:3] xmc_adr[35:3] 16B mask(xmd_[wrval,eow,adr[6:4],wrmsk[15:0]])
* IOBDMA xmc_sid[8:3] xmc_did[8:3] (xmd_[wrval,eow,dat[]]) length(xmd_[wrval,eow,dat[]])
* IOBRSP not traced, but monitored to keep XMC and XMD data in sync.
* @endverbatim
*
* <hr>$Revision: 41586 $<hr>
*/
#ifndef __CVMX_TRA_H__
#define __CVMX_TRA_H__
#include "cvmx.h"
#ifdef __cplusplus
extern "C" {
#endif
/* CSR typedefs have been moved to cvmx-csr-*.h */
/**
* Enumeration of the data types stored in cvmx_tra_data_t
*/
typedef enum
{
CVMX_TRA_DATA_DWB = 0x0,
CVMX_TRA_DATA_PL2 = 0x1,
CVMX_TRA_DATA_PSL1 = 0x2,
CVMX_TRA_DATA_LDD = 0x3,
CVMX_TRA_DATA_LDI = 0x4,
CVMX_TRA_DATA_LDT = 0x5,
CVMX_TRA_DATA_STC = 0x6,
CVMX_TRA_DATA_STF = 0x7,
CVMX_TRA_DATA_STP = 0x8,
CVMX_TRA_DATA_STT = 0x9,
CVMX_TRA_DATA_IOBLD8 = 0xa,
CVMX_TRA_DATA_IOBLD16 = 0xb,
CVMX_TRA_DATA_IOBLD32 = 0xc,
CVMX_TRA_DATA_IOBLD64 = 0xd,
CVMX_TRA_DATA_IOBST = 0xe,
CVMX_TRA_DATA_IOBDMA = 0xf,
CVMX_TRA_DATA_SAA = 0x10,
} cvmx_tra_data_type_t;
/**
* TRA data format definition. Use the type field to
* determine which union element to use.
*/
typedef union
{
uint64_t u64;
struct
{
#if __BYTE_ORDER == __BIG_ENDIAN
uint64_t valid : 1;
uint64_t discontinuity:1;
uint64_t address : 36;
uint64_t reserved : 5;
uint64_t source : 5;
uint64_t reserved2 : 3;
cvmx_tra_data_type_t type:5;
uint64_t timestamp : 8;
#else
uint64_t timestamp : 8;
cvmx_tra_data_type_t type:5;
uint64_t reserved2 : 3;
uint64_t source : 5;
uint64_t reserved : 5;
uint64_t address : 36;
uint64_t discontinuity:1;
uint64_t valid : 1;
#endif
} cmn; /**< for DWB, PL2, PSL1, LDD, LDI, LDT */
struct
{
#if __BYTE_ORDER == __BIG_ENDIAN
uint64_t valid : 1;
uint64_t discontinuity:1;
uint64_t address : 33;
uint64_t mask : 8;
uint64_t source : 5;
uint64_t reserved2 : 3;
cvmx_tra_data_type_t type:5;
uint64_t timestamp : 8;
#else
uint64_t timestamp : 8;
cvmx_tra_data_type_t type:5;
uint64_t reserved2 : 3;
uint64_t source : 5;
uint64_t mask : 8;
uint64_t address : 33;
uint64_t discontinuity:1;
uint64_t valid : 1;
#endif
} store; /**< STC, STF, STP, STT */
struct
{
#if __BYTE_ORDER == __BIG_ENDIAN
uint64_t valid : 1;
uint64_t discontinuity:1;
uint64_t address : 36;
uint64_t reserved : 2;
uint64_t subid : 3;
uint64_t source : 4;
uint64_t dest : 5;
uint64_t type : 4;
uint64_t timestamp : 8;
#else
uint64_t timestamp : 8;
uint64_t type : 4;
uint64_t dest : 5;
uint64_t source : 4;
uint64_t subid : 3;
uint64_t reserved : 2;
uint64_t address : 36;
uint64_t discontinuity:1;
uint64_t valid : 1;
#endif
} iobld; /**< for IOBLD8, IOBLD16, IOBLD32, IOBLD64, IOBST, SAA */
struct
{
#if __BYTE_ORDER == __BIG_ENDIAN
uint64_t valid : 1;
uint64_t discontinuity:1;
uint64_t address : 33;
uint64_t mask : 8;
uint64_t source : 4;
uint64_t dest : 5;
uint64_t type : 4;
uint64_t timestamp : 8;
#else
uint64_t timestamp : 8;
uint64_t type : 4;
uint64_t dest : 5;
uint64_t source : 4;
uint64_t mask : 8;
uint64_t address : 33;
uint64_t discontinuity:1;
uint64_t valid : 1;
#endif
} iob; /**< for IOBDMA */
} cvmx_tra_data_t;
/**
* Setup the TRA buffer for use
*
* @param control TRA control setup
* @param filter Which events to log
* @param source_filter
* Source match
* @param dest_filter
* Destination match
* @param address Address compare
* @param address_mask
* Address mask
*/
extern void cvmx_tra_setup(cvmx_tra_ctl_t control, cvmx_tra_filt_cmd_t filter,
cvmx_tra_filt_sid_t source_filter, cvmx_tra_filt_did_t dest_filter,
uint64_t address, uint64_t address_mask);
/**
* Setup a TRA trigger. How the triggers are used should be
* setup using cvmx_tra_setup.
*
* @param trigger Trigger to setup (0 or 1)
* @param filter Which types of events to trigger on
* @param source_filter
* Source trigger match
* @param dest_filter
* Destination trigger match
* @param address Trigger address compare
* @param address_mask
* Trigger address mask
*/
extern void cvmx_tra_trig_setup(uint64_t trigger, cvmx_tra_filt_cmd_t filter,
cvmx_tra_filt_sid_t source_filter, cvmx_tra_trig0_did_t dest_filter,
uint64_t address, uint64_t address_mask);
/**
* Read an entry from the TRA buffer
*
* @return Value return. High bit will be zero if there wasn't any data
*/
extern cvmx_tra_data_t cvmx_tra_read(void);
/**
* Decode a TRA entry into human readable output
*
* @param tra_ctl Trace control setup
* @param data Data to decode
*/
extern void cvmx_tra_decode_text(cvmx_tra_ctl_t tra_ctl, cvmx_tra_data_t data);
/**
* Display the entire trace buffer. It is advised that you
* disable the trace buffer before calling this routine
* otherwise it could infinitely loop displaying trace data
* that it created.
*/
extern void cvmx_tra_display(void);
/**
* Enable or disable the TRA hardware
*
* @param enable 1=enable, 0=disable
*/
static inline void cvmx_tra_enable(int enable)
{
cvmx_tra_ctl_t control;
control.u64 = cvmx_read_csr(CVMX_TRA_CTL);
control.s.ena = enable;
cvmx_write_csr(CVMX_TRA_CTL, control.u64);
cvmx_read_csr(CVMX_TRA_CTL);
}
#ifdef __cplusplus
}
#endif
#endif
Reference in New Issue View Git Blame Copy Permalink