d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5578ada6e9
freebsd-skq/sys/i386/isa/sound/sscape.c
jkh 19112b8b1d Update the sound driver to VOXWARE 3.05 with one GUS patch from 
Amancio.  There is some SoundSource support here that is primitive and
probably doesn't work, but I'll let the two submitters let me know
how my integration of that was since I don't have this card to test.
I've only tested this on my GUS MAX since it's all I have.

This all probably needs to be re-done anyway since we're widely variant
from the original VOXWARE source in the current layout.
Submitted by:	Amancio Hasty and Jim Lowe
Obtained from:  Hannu Savolainen
1995-07-28 21:40:49 +00:00

1121 lines
24 KiB
C
Raw Blame History

/*
* sound/sscape.c
*
* Low level driver for Ensoniq Soundscape
*
* Copyright by Hannu Savolainen 1994
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer. 2.
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
#include "sound_config.h"
#if defined(CONFIGURE_SOUNDCARD) && !defined(EXCLUDE_SSCAPE)
#include "coproc.h"
/*
* I/O ports
*/
#define MIDI_DATA 0
#define MIDI_CTRL 1
#define HOST_CTRL 2
#define TX_READY 0x02
#define RX_READY 0x01
#define HOST_DATA 3
#define ODIE_ADDR 4
#define ODIE_DATA 5
/*
* Indirect registers
*/
#define GA_INTSTAT_REG 0
#define GA_INTENA_REG 1
#define GA_DMAA_REG 2
#define GA_DMAB_REG 3
#define GA_INTCFG_REG 4
#define GA_DMACFG_REG 5
#define GA_CDCFG_REG 6
#define GA_SMCFGA_REG 7
#define GA_SMCFGB_REG 8
#define GA_HMCTL_REG 9
/*
* DMA channel identifiers (A and B)
*/
#define SSCAPE_DMA_A 0
#define SSCAPE_DMA_B 1
#define PORT(name) (devc->base+name)
/*
* Host commands recognized by the OBP microcode
*/
#define CMD_GEN_HOST_ACK 0x80
#define CMD_GEN_MPU_ACK 0x81
#define CMD_GET_BOARD_TYPE 0x82
#define CMD_SET_CONTROL 0x88
#define CMD_GET_CONTROL 0x89
#define CMD_SET_MT32 0x96
#define CMD_GET_MT32 0x97
#define CMD_SET_EXTMIDI 0x9b
#define CMD_GET_EXTMIDI 0x9c
#define CMD_ACK 0x80
typedef struct sscape_info
{
int base, irq, dma;
int ok; /* Properly detected */
int dma_allocated;
int my_audiodev;
int opened;
}
sscape_info;
static struct sscape_info dev_info =
{0};
static struct sscape_info *devc = &dev_info;
DEFINE_WAIT_QUEUE (sscape_sleeper, sscape_sleep_flag);
#ifdef REVEAL_SPEA
/* Spea and Reveal have assigned interrupt bits differently than Ensoniq */
static char valid_interrupts[] =
{9, 7, 5, 15};
#else
static char valid_interrupts[] =
{9, 5, 7, 10};
#endif
static unsigned char
sscape_read (struct sscape_info *devc, int reg)
{
unsigned long flags;
unsigned char val;
DISABLE_INTR (flags);
OUTB (reg, PORT (ODIE_ADDR));
val = INB (PORT (ODIE_DATA));
RESTORE_INTR (flags);
return val;
}
static void
sscape_write (struct sscape_info *devc, int reg, int data)
{
unsigned long flags;
DISABLE_INTR (flags);
OUTB (reg, PORT (ODIE_ADDR));
OUTB (data, PORT (ODIE_DATA));
RESTORE_INTR (flags);
}
static void
host_open (struct sscape_info *devc)
{
OUTB (0x00, PORT (HOST_CTRL)); /* Put the board to the host mode */
}
static void
host_close (struct sscape_info *devc)
{
OUTB (0x03, PORT (HOST_CTRL)); /* Put the board to the MIDI mode */
}
static int
host_write (struct sscape_info *devc, unsigned char *data, int count)
{
unsigned long flags;
int i, timeout;
DISABLE_INTR (flags);
/*
* Send the command and data bytes
*/
for (i = 0; i < count; i++)
{
for (timeout = 10000; timeout > 0; timeout--)
if (INB (PORT (HOST_CTRL)) & TX_READY)
break;
if (timeout <= 0)
{
RESTORE_INTR (flags);
return 0;
}
OUTB (data[i], PORT (HOST_DATA));
}
RESTORE_INTR (flags);
return 1;
}
static int
host_read (struct sscape_info *devc)
{
unsigned long flags;
int timeout;
unsigned char data;
DISABLE_INTR (flags);
/*
* Read a byte
*/
for (timeout = 10000; timeout > 0; timeout--)
if (INB (PORT (HOST_CTRL)) & RX_READY)
break;
if (timeout <= 0)
{
RESTORE_INTR (flags);
return -1;
}
data = INB (PORT (HOST_DATA));
RESTORE_INTR (flags);
return data;
}
static int
host_command1 (struct sscape_info *devc, int cmd)
{
unsigned char buf[10];
buf[0] = (unsigned char) (cmd & 0xff);
return host_write (devc, buf, 1);
}
static int
host_command2 (struct sscape_info *devc, int cmd, int parm1)
{
unsigned char buf[10];
buf[0] = (unsigned char) (cmd & 0xff);
buf[1] = (unsigned char) (parm1 & 0xff);
return host_write (devc, buf, 2);
}
static int
host_command3 (struct sscape_info *devc, int cmd, int parm1, int parm2)
{
unsigned char buf[10];
buf[0] = (unsigned char) (cmd & 0xff);
buf[1] = (unsigned char) (parm1 & 0xff);
buf[2] = (unsigned char) (parm2 & 0xff);
return host_write (devc, buf, 3);
}
static void
set_mt32 (struct sscape_info *devc, int value)
{
host_open (devc);
host_command2 (devc, CMD_SET_MT32,
value ? 1 : 0);
if (host_read (devc) != CMD_ACK)
{
printk ("SNDSCAPE: Setting MT32 mode failed\n");
}
host_close (devc);
}
static int
get_board_type (struct sscape_info *devc)
{
int tmp;
host_open (devc);
if (!host_command1 (devc, CMD_GET_BOARD_TYPE))
tmp = -1;
else
tmp = host_read (devc);
host_close (devc);
return tmp;
}
void
sscapeintr (INT_HANDLER_PARMS (irq, dummy))
{
unsigned char bits, tmp;
static int debug = 0;
printk ("sscapeintr(0x%02x)\n", (bits = sscape_read (devc, GA_INTSTAT_REG)));
if (SOMEONE_WAITING (sscape_sleeper, sscape_sleep_flag))
{
WAKE_UP (sscape_sleeper, sscape_sleep_flag);
}
if (bits & 0x02) /* Host interface interrupt */
{
printk ("SSCAPE: Host interrupt, data=%02x\n", host_read (devc));
}
#if (!defined(EXCLUDE_MPU401) || !defined(EXCLUDE_MPU_EMU)) && !defined(EXCLUDE_MIDI)
if (bits & 0x01)
{
mpuintr (INT_HANDLER_CALL (irq));
if (debug++ > 10) /* Temporary debugging hack */
{
sscape_write (devc, GA_INTENA_REG, 0x00); /* Disable all interrupts */
}
}
#endif
/*
* Acknowledge interrupts (toggle the interrupt bits)
*/
tmp = sscape_read (devc, GA_INTENA_REG);
sscape_write (devc, GA_INTENA_REG, (~bits & 0x0e) | (tmp & 0xf1));
}
static void
sscape_enable_intr (struct sscape_info *devc, unsigned intr_bits)
{
unsigned char temp, orig;
temp = orig = sscape_read (devc, GA_INTENA_REG);
temp |= intr_bits;
temp |= 0x80; /* Master IRQ enable */
if (temp == orig)
return; /* No change */
sscape_write (devc, GA_INTENA_REG, temp);
}
static void
sscape_disable_intr (struct sscape_info *devc, unsigned intr_bits)
{
unsigned char temp, orig;
temp = orig = sscape_read (devc, GA_INTENA_REG);
temp &= ~intr_bits;
if ((temp & ~0x80) == 0x00)
temp = 0x00; /* Master IRQ disable */
if (temp == orig)
return; /* No change */
sscape_write (devc, GA_INTENA_REG, temp);
}
static void
do_dma (struct sscape_info *devc, int dma_chan, unsigned long buf, int blk_size, int mode)
{
unsigned char temp;
if (dma_chan != SSCAPE_DMA_A)
{
printk ("SSCAPE: Tried to use DMA channel != A. Why?\n");
return;
}
DMAbuf_start_dma (devc->my_audiodev,
buf,
blk_size, mode);
temp = devc->dma << 4; /* Setup DMA channel select bits */
if (devc->dma <= 3)
temp |= 0x80; /* 8 bit DMA channel */
temp |= 1; /* Trigger DMA */
sscape_write (devc, GA_DMAA_REG, temp);
temp &= 0xfe; /* Clear DMA trigger */
sscape_write (devc, GA_DMAA_REG, temp);
}
static int
verify_mpu (struct sscape_info *devc)
{
/*
* The SoundScape board could be in three modes (MPU, 8250 and host).
* If the card is not in the MPU mode, enabling the MPU driver will
* cause infinite loop (the driver believes that there is always some
* received data in the buffer.
*
* Detect this by looking if there are more than 10 received MIDI bytes
* (0x00) in the buffer.
*/
int i;
for (i = 0; i < 10; i++)
{
if (INB (devc->base + HOST_CTRL) & 0x80)
return 1;
if (INB (devc->base) != 0x00)
return 1;
}
printk ("SoundScape: The device is not in the MPU-401 mode\n");
return 0;
}
static int
sscape_coproc_open (void *dev_info, int sub_device)
{
if (sub_device == COPR_MIDI)
{
set_mt32 (devc, 0);
if (!verify_mpu (devc))
return RET_ERROR (EIO);
}
return 0;
}
static void
sscape_coproc_close (void *dev_info, int sub_device)
{
struct sscape_info *devc = dev_info;
unsigned long flags;
DISABLE_INTR (flags);
if (devc->dma_allocated)
{
sscape_write (devc, GA_DMAA_REG, 0x20); /* DMA channel disabled */
#ifndef EXCLUDE_NATIVE_PCM
DMAbuf_close_dma (devc->my_audiodev);
#endif
devc->dma_allocated = 0;
}
RESET_WAIT_QUEUE (sscape_sleeper, sscape_sleep_flag);
RESTORE_INTR (flags);
return;
}
static void
sscape_coproc_reset (void *dev_info)
{
}
static int
sscape_download_boot (struct sscape_info *devc, unsigned char *block, int size, int flag)
{
unsigned long flags;
unsigned char temp;
int done, timeout;
if (flag & CPF_FIRST)
{
/*
* First block. Have to allocate DMA and to reset the board
* before continuing.
*/
DISABLE_INTR (flags);
if (devc->dma_allocated == 0)
{
#ifndef EXCLUDE_NATIVE_PCM
if (DMAbuf_open_dma (devc->my_audiodev) < 0)
{
RESTORE_INTR (flags);
return 0;
}
#endif
devc->dma_allocated = 1;
}
RESTORE_INTR (flags);
sscape_write (devc, GA_HMCTL_REG,
(temp = sscape_read (devc, GA_HMCTL_REG)) & 0x3f); /*Reset */
for (timeout = 10000; timeout > 0; timeout--)
sscape_read (devc, GA_HMCTL_REG); /* Delay */
/* Take board out of reset */
sscape_write (devc, GA_HMCTL_REG,
(temp = sscape_read (devc, GA_HMCTL_REG)) | 0x80);
}
/*
* Transfer one code block using DMA
*/
memcpy (audio_devs[devc->my_audiodev]->dmap->raw_buf[0], block, size);
DISABLE_INTR (flags);
/******** INTERRUPTS DISABLED NOW ********/
do_dma (devc, SSCAPE_DMA_A,
audio_devs[devc->my_audiodev]->dmap->raw_buf_phys[0],
size, DMA_MODE_WRITE);
/*
* Wait until transfer completes.
*/
RESET_WAIT_QUEUE (sscape_sleeper, sscape_sleep_flag);
done = 0;
timeout = 100;
while (!done && timeout-- > 0)
{
int resid;
DO_SLEEP (sscape_sleeper, sscape_sleep_flag, 1);
clear_dma_ff (devc->dma);
if ((resid = get_dma_residue (devc->dma)) == 0)
done = 1;
}
RESTORE_INTR (flags);
if (!done)
return 0;
if (flag & CPF_LAST)
{
/*
* Take the board out of reset
*/
OUTB (0x00, PORT (HOST_CTRL));
OUTB (0x00, PORT (MIDI_CTRL));
temp = sscape_read (devc, GA_HMCTL_REG);
temp |= 0x40;
sscape_write (devc, GA_HMCTL_REG, temp); /* Kickstart the board */
/*
* Wait until the ODB wakes up
*/
DISABLE_INTR (flags);
done = 0;
timeout = 5 * HZ;
while (!done && timeout-- > 0)
{
DO_SLEEP (sscape_sleeper, sscape_sleep_flag, 1);
if (INB (PORT (HOST_DATA)) == 0xff) /* OBP startup acknowledge */
done = 1;
}
RESTORE_INTR (flags);
if (!done)
{
printk ("SoundScape: The OBP didn't respond after code download\n");
return 0;
}
DISABLE_INTR (flags);
done = 0;
timeout = 5 * HZ;
while (!done && timeout-- > 0)
{
DO_SLEEP (sscape_sleeper, sscape_sleep_flag, 1);
if (INB (PORT (HOST_DATA)) == 0xfe) /* Host startup acknowledge */
done = 1;
}
RESTORE_INTR (flags);
if (!done)
{
printk ("SoundScape: OBP Initialization failed.\n");
return 0;
}
printk ("SoundScape board of type %d initialized OK\n",
get_board_type (devc));
#ifdef SSCAPE_DEBUG3
/*
* Temporary debugging aid. Print contents of the registers after
* downloading the code.
*/
{
int i;
for (i = 0; i < 13; i++)
printk ("I%d = %02x (new value)\n", i, sscape_read (devc, i));
}
#endif
}
return 1;
}
static int
download_boot_block (void *dev_info, copr_buffer * buf)
{
if (buf->len <= 0 || buf->len > sizeof (buf->data))
return RET_ERROR (EINVAL);
if (!sscape_download_boot (devc, buf->data, buf->len, buf->flags))
{
printk ("SSCAPE: Unable to load microcode block to the OBP.\n");
return RET_ERROR (EIO);
}
return 0;
}
static int
sscape_coproc_ioctl (void *dev_info, unsigned int cmd, unsigned int arg, int local)
{
switch (cmd)
{
case SNDCTL_COPR_RESET:
sscape_coproc_reset (dev_info);
return 0;
break;
case SNDCTL_COPR_LOAD:
{
copr_buffer *buf;
int err;
buf = (copr_buffer *) KERNEL_MALLOC (sizeof (copr_buffer));
IOCTL_FROM_USER ((char *) buf, (char *) arg, 0, sizeof (*buf));
err = download_boot_block (dev_info, buf);
KERNEL_FREE (buf);
return err;
}
break;
default:
return RET_ERROR (EINVAL);
}
return RET_ERROR (EINVAL);
}
static coproc_operations sscape_coproc_operations =
{
"SoundScape M68K",
sscape_coproc_open,
sscape_coproc_close,
sscape_coproc_ioctl,
sscape_coproc_reset,
&dev_info
};
static int
sscape_audio_open (int dev, int mode)
{
unsigned long flags;
sscape_info *devc = (sscape_info *) audio_devs[dev]->devc;
DISABLE_INTR (flags);
if (devc->opened)
{
RESTORE_INTR (flags);
return RET_ERROR (EBUSY);
}
if (devc->dma_allocated == 0)
{
int err;
if ((err = DMAbuf_open_dma (devc->my_audiodev)) < 0)
{
RESTORE_INTR (flags);
return err;
}
devc->dma_allocated = 1;
}
devc->opened = 1;
RESTORE_INTR (flags);
#ifdef SSCAPE_DEBUG4
/*
* Temporary debugging aid. Print contents of the registers
* when the device is opened.
*/
{
int i;
for (i = 0; i < 13; i++)
printk ("I%d = %02x\n", i, sscape_read (devc, i));
}
#endif
return 0;
}
static void
sscape_audio_close (int dev)
{
unsigned long flags;
sscape_info *devc = (sscape_info *) audio_devs[dev]->devc;
DEB (printk ("sscape_audio_close(void)\n"));
DISABLE_INTR (flags);
if (devc->dma_allocated)
{
sscape_write (devc, GA_DMAA_REG, 0x20); /* DMA channel disabled */
DMAbuf_close_dma (dev);
devc->dma_allocated = 0;
}
devc->opened = 0;
RESTORE_INTR (flags);
}
static int
set_speed (sscape_info * devc, int arg)
{
return 8000;
}
static int
set_channels (sscape_info * devc, int arg)
{
return 1;
}
static int
set_format (sscape_info * devc, int arg)
{
return AFMT_U8;
}
static int
sscape_audio_ioctl (int dev, unsigned int cmd, unsigned int arg, int local)
{
sscape_info *devc = (sscape_info *) audio_devs[dev]->devc;
switch (cmd)
{
case SOUND_PCM_WRITE_RATE:
if (local)
return set_speed (devc, arg);
return IOCTL_OUT (arg, set_speed (devc, IOCTL_IN (arg)));
case SOUND_PCM_READ_RATE:
if (local)
return 8000;
return IOCTL_OUT (arg, 8000);
case SNDCTL_DSP_STEREO:
if (local)
return set_channels (devc, arg + 1) - 1;
return IOCTL_OUT (arg, set_channels (devc, IOCTL_IN (arg) + 1) - 1);
case SOUND_PCM_WRITE_CHANNELS:
if (local)
return set_channels (devc, arg);
return IOCTL_OUT (arg, set_channels (devc, IOCTL_IN (arg)));
case SOUND_PCM_READ_CHANNELS:
if (local)
return 1;
return IOCTL_OUT (arg, 1);
case SNDCTL_DSP_SAMPLESIZE:
if (local)
return set_format (devc, arg);
return IOCTL_OUT (arg, set_format (devc, IOCTL_IN (arg)));
case SOUND_PCM_READ_BITS:
if (local)
return 8;
return IOCTL_OUT (arg, 8);
default:;
}
return RET_ERROR (EINVAL);
}
static void
sscape_audio_output_block (int dev, unsigned long buf, int count, int intrflag, int dma_restart)
{
}
static void
sscape_audio_start_input (int dev, unsigned long buf, int count, int intrflag, int dma_restart)
{
}
static int
sscape_audio_prepare_for_input (int dev, int bsize, int bcount)
{
return 0;
}
static int
sscape_audio_prepare_for_output (int dev, int bsize, int bcount)
{
return 0;
}
static void
sscape_audio_halt (int dev)
{
}
static void
sscape_audio_reset (int dev)
{
sscape_audio_halt (dev);
}
static struct audio_operations sscape_audio_operations =
{
"Ensoniq SoundScape channel A",
0,
AFMT_U8 | AFMT_S16_LE,
NULL,
sscape_audio_open,
sscape_audio_close,
sscape_audio_output_block,
sscape_audio_start_input,
sscape_audio_ioctl,
sscape_audio_prepare_for_input,
sscape_audio_prepare_for_output,
sscape_audio_reset,
sscape_audio_halt,
NULL,
NULL
};
long
attach_sscape (long mem_start, struct address_info *hw_config)
{
int my_dev;
#ifndef SSCAPE_REGS
/*
* Config register values for Spea/V7 Media FX and Ensoniq S-2000.
* These values are card
* dependent. If you have another SoundScape based card, you have to
* find the correct values. Do the following:
* - Compile this driver with SSCAPE_DEBUG1 defined.
* - Shut down and power off your machine.
* - Boot with DOS so that the SSINIT.EXE program is run.
* - Warm boot to {Linux|SYSV|BSD} and write down the lines displayed
* when detecting the SoundScape.
* - Modify the following list to use the values printed during boot.
* Undefine the SSCAPE_DEBUG1
*/
#define SSCAPE_REGS { \
/* I0 */ 0x00, \
0xf0, /* Note! Ignored. Set always to 0xf0 */ \
0x20, /* Note! Ignored. Set always to 0x20 */ \
0x20, /* Note! Ignored. Set always to 0x20 */ \
0xf5, /* Ignored */ \
0x10, \
0x00, \
0x2e, /* I7 MEM config A. Likely to vary between models */ \
0x00, /* I8 MEM config A. Likely to vary between models */ \
/* I9 */ 0x40 /* Ignored */ \
}
#endif
unsigned long flags;
static unsigned char regs[10] = SSCAPE_REGS;
int i, irq_bits = 0xff;
if (!probe_sscape (hw_config))
return mem_start;
printk (" <Ensoniq Soundscape>");
for (i = 0; i < sizeof (valid_interrupts); i++)
if (hw_config->irq == valid_interrupts[i])
{
irq_bits = i;
break;
}
if (hw_config->irq > 15 || (regs[4] = irq_bits == 0xff))
{
printk ("Invalid IRQ%d\n", hw_config->irq);
return mem_start;
}
DISABLE_INTR (flags);
for (i = 1; i < 10; i++)
switch (i)
{
case 1: /* Host interrupt enable */
sscape_write (devc, i, 0xf0); /* All interrupts enabled */
break;
case 2: /* DMA A status/trigger register */
case 3: /* DMA B status/trigger register */
sscape_write (devc, i, 0x20); /* DMA channel disabled */
break;
case 4: /* Host interrupt config reg */
sscape_write (devc, i, 0xf0 | (irq_bits << 2) | irq_bits);
break;
case 5: /* Don't destroy CD-ROM DMA config bits (0xc0) */
sscape_write (devc, i, (regs[i] & 0x3f) |
(sscape_read (devc, i) & 0x0c));
break;
case 6: /* CD-ROM config. Don't touch. */
break;
case 9: /* Master control reg. Don't modify CR-ROM bits. Disable SB emul */
sscape_write (devc, i,
(sscape_read (devc, i) & 0xf0) | 0x00);
break;
default:
sscape_write (devc, i, regs[i]);
}
RESTORE_INTR (flags);
#ifdef SSCAPE_DEBUG2
/*
* Temporary debugging aid. Print contents of the registers after
* changing them.
*/
{
int i;
for (i = 0; i < 13; i++)
printk ("I%d = %02x (new value)\n", i, sscape_read (devc, i));
}
#endif
#if !defined(EXCLUDE_MIDI) && !defined(EXCLUDE_MPU_EMU)
hw_config->always_detect = 1;
if (probe_mpu401 (hw_config))
{
int prev_devs;
prev_devs = num_midis;
mem_start = attach_mpu401 (mem_start, hw_config);
if (num_midis == (prev_devs + 1)) /* The MPU driver installed itself */
midi_devs[prev_devs]->coproc = &sscape_coproc_operations;
}
#endif
#ifndef EXCLUDE_NATIVE_PCM
/* Not supported yet */
#ifndef EXCLUDE_AUDIO
if (num_audiodevs < MAX_AUDIO_DEV)
{
audio_devs[my_dev = num_audiodevs++] = &sscape_audio_operations;
audio_devs[my_dev]->dmachan = hw_config->dma;
audio_devs[my_dev]->buffcount = 1;
audio_devs[my_dev]->buffsize = DSP_BUFFSIZE;
audio_devs[my_dev]->devc = devc;
devc->my_audiodev = my_dev;
devc->opened = 0;
audio_devs[my_dev]->coproc = &sscape_coproc_operations;
if (snd_set_irq_handler (hw_config->irq, sscapeintr, "SoundScape") < 0)
printk ("Error: Can't allocate IRQ for SoundScape\n");
sscape_write (devc, GA_INTENA_REG, 0x80); /* Master IRQ enable */
}
else
printk ("SoundScape: More than enough audio devices detected\n");
#endif
#endif
devc->ok = 1;
return mem_start;
}
int
probe_sscape (struct address_info *hw_config)
{
unsigned char save;
devc->base = hw_config->io_base;
devc->irq = hw_config->irq;
devc->dma = hw_config->dma;
/*
* First check that the address register of "ODIE" is
* there and that it has exactly 4 writeable bits.
* First 4 bits
*/
if ((save = INB (PORT (ODIE_ADDR))) & 0xf0)
return 0;
OUTB (0x00, PORT (ODIE_ADDR));
if (INB (PORT (ODIE_ADDR)) != 0x00)
return 0;
OUTB (0xff, PORT (ODIE_ADDR));
if (INB (PORT (ODIE_ADDR)) != 0x0f)
return 0;
OUTB (save, PORT (ODIE_ADDR));
/*
* Now verify that some indirect registers return zero on some bits.
* This may break the driver with some future revisions of "ODIE" but...
*/
if (sscape_read (devc, 0) & 0x0c)
return 0;
if (sscape_read (devc, 1) & 0x0f)
return 0;
if (sscape_read (devc, 5) & 0x0f)
return 0;
#ifdef SSCAPE_DEBUG1
/*
* Temporary debugging aid. Print contents of the registers before
* changing them.
*/
{
int i;
for (i = 0; i < 13; i++)
printk ("I%d = %02x (old value)\n", i, sscape_read (devc, i));
}
#endif
return 1;
}
int
probe_ss_ms_sound (struct address_info *hw_config)
{
int i, irq_bits = 0xff;
if (devc->ok == 0)
{
printk ("SoundScape: Invalid initialization order.\n");
return 0;
}
for (i = 0; i < sizeof (valid_interrupts); i++)
if (hw_config->irq == valid_interrupts[i])
{
irq_bits = i;
break;
}
#ifdef REVEAL_SPEA
{
int tmp, status = 0;
int cc;
if (!((tmp = sscape_read (devc, GA_HMCTL_REG)) & 0xc0))
{
sscape_write (devc, GA_HMCTL_REG, tmp | 0x80);
for (cc = 0; cc < 200000; ++cc)
INB (devc->base + ODIE_ADDR);
}
}
#endif
if (hw_config->irq > 15 || irq_bits == 0xff)
{
printk ("SoundScape: Invalid MSS IRQ%d\n", hw_config->irq);
return 0;
}
return ad1848_detect (hw_config->io_base);
}
long
attach_ss_ms_sound (long mem_start, struct address_info *hw_config)
{
/*
* This routine configures the SoundScape card for use with the
* Win Sound System driver. The AD1848 codec interface uses the CD-ROM
* config registers of the "ODIE".
*/
int i, irq_bits = 0xff;
#ifdef EXCLUDE_NATIVE_PCM
int prev_devs = num_audiodevs;
#endif
/*
* Setup the DMA polarity.
*/
sscape_write (devc, GA_DMACFG_REG, 0x50);
/*
* Take the gate-arry off of the DMA channel.
*/
sscape_write (devc, GA_DMAB_REG, 0x20);
/*
* Init the AD1848 (CD-ROM) config reg.
*/
for (i = 0; i < sizeof (valid_interrupts); i++)
if (hw_config->irq == valid_interrupts[i])
{
irq_bits = i;
break;
}
sscape_write (devc, GA_CDCFG_REG, 0x89 | (hw_config->dma << 4) |
(irq_bits << 1));
if (hw_config->irq == devc->irq)
printk ("SoundScape: Warning! The WSS mode can't share IRQ with MIDI\n");
ad1848_init ("SoundScape", hw_config->io_base,
hw_config->irq,
hw_config->dma,
hw_config->dma);
#ifdef EXCLUDE_NATIVE_PCM
if (num_audiodevs == (prev_devs + 1)) /* The AD1848 driver installed itself */
audio_devs[prev_devs]->coproc = &sscape_coproc_operations;
#endif
#ifdef SSCAPE_DEBUG5
/*
* Temporary debugging aid. Print contents of the registers
* after the AD1848 device has been initialized.
*/
{
int i;
for (i = 0; i < 13; i++)
printk ("I%d = %02x\n", i, sscape_read (devc, i));
}
#endif
return mem_start;
}
#endif
Reference in New Issue View Git Blame Copy Permalink