2418402399
switch reset/initialise functions. The AR934x and QC955x SoCs both have a configurable MDIO base clock. The others have the MDIO clock use the same clock as the system reference clock, whatever that may be. Tested: * AR9344 SoC TODO: * mips24k - AR933x would be fine for now, just to ensure that things are sane.
342 lines
8.3 KiB
C
342 lines
8.3 KiB
C
/*-
|
|
* Copyright (c) 2010 Adrian Chadd
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include "opt_ddb.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/cons.h>
|
|
#include <sys/kdb.h>
|
|
#include <sys/reboot.h>
|
|
|
|
#include <vm/vm.h>
|
|
#include <vm/vm_page.h>
|
|
|
|
#include <net/ethernet.h>
|
|
|
|
#include <machine/clock.h>
|
|
#include <machine/cpu.h>
|
|
#include <machine/cpuregs.h>
|
|
#include <machine/hwfunc.h>
|
|
#include <machine/md_var.h>
|
|
#include <machine/trap.h>
|
|
#include <machine/vmparam.h>
|
|
|
|
#include <mips/atheros/ar71xxreg.h>
|
|
#include <mips/atheros/ar71xx_chip.h>
|
|
#include <mips/atheros/ar71xx_cpudef.h>
|
|
|
|
#include <mips/sentry5/s5reg.h>
|
|
|
|
/* XXX these should replace the current definitions in ar71xxreg.h */
|
|
/* XXX perhaps an ar71xx_chip.h header file? */
|
|
#define AR71XX_PLL_REG_CPU_CONFIG AR71XX_PLL_CPU_BASE + 0x00
|
|
#define AR71XX_PLL_REG_SEC_CONFIG AR71XX_PLL_CPU_BASE + 0x04
|
|
#define AR71XX_PLL_REG_ETH0_INT_CLOCK AR71XX_PLL_CPU_BASE + 0x10
|
|
#define AR71XX_PLL_REG_ETH1_INT_CLOCK AR71XX_PLL_CPU_BASE + 0x14
|
|
|
|
#define AR71XX_PLL_DIV_SHIFT 3
|
|
#define AR71XX_PLL_DIV_MASK 0x1f
|
|
#define AR71XX_CPU_DIV_SHIFT 16
|
|
#define AR71XX_CPU_DIV_MASK 0x3
|
|
#define AR71XX_DDR_DIV_SHIFT 18
|
|
#define AR71XX_DDR_DIV_MASK 0x3
|
|
#define AR71XX_AHB_DIV_SHIFT 20
|
|
#define AR71XX_AHB_DIV_MASK 0x7
|
|
|
|
/* XXX these shouldn't be in here - this file is a per-chip file */
|
|
/* XXX these should be in the top-level ar71xx type, not ar71xx -chip */
|
|
uint32_t u_ar71xx_cpu_freq;
|
|
uint32_t u_ar71xx_ahb_freq;
|
|
uint32_t u_ar71xx_ddr_freq;
|
|
uint32_t u_ar71xx_uart_freq;
|
|
uint32_t u_ar71xx_wdt_freq;
|
|
uint32_t u_ar71xx_refclk;
|
|
uint32_t u_ar71xx_mdio_freq;
|
|
|
|
static void
|
|
ar71xx_chip_detect_mem_size(void)
|
|
{
|
|
}
|
|
|
|
static void
|
|
ar71xx_chip_detect_sys_frequency(void)
|
|
{
|
|
uint32_t pll;
|
|
uint32_t freq;
|
|
uint32_t div;
|
|
|
|
u_ar71xx_mdio_freq = u_ar71xx_refclk = AR71XX_BASE_FREQ;
|
|
|
|
pll = ATH_READ_REG(AR71XX_PLL_REG_CPU_CONFIG);
|
|
|
|
div = ((pll >> AR71XX_PLL_DIV_SHIFT) & AR71XX_PLL_DIV_MASK) + 1;
|
|
freq = div * AR71XX_BASE_FREQ;
|
|
|
|
div = ((pll >> AR71XX_CPU_DIV_SHIFT) & AR71XX_CPU_DIV_MASK) + 1;
|
|
u_ar71xx_cpu_freq = freq / div;
|
|
|
|
div = ((pll >> AR71XX_DDR_DIV_SHIFT) & AR71XX_DDR_DIV_MASK) + 1;
|
|
u_ar71xx_ddr_freq = freq / div;
|
|
|
|
div = (((pll >> AR71XX_AHB_DIV_SHIFT) & AR71XX_AHB_DIV_MASK) + 1) * 2;
|
|
u_ar71xx_ahb_freq = u_ar71xx_cpu_freq / div;
|
|
u_ar71xx_wdt_freq = u_ar71xx_cpu_freq / div;
|
|
u_ar71xx_uart_freq = u_ar71xx_cpu_freq / div;
|
|
}
|
|
|
|
/*
|
|
* This does not lock the CPU whilst doing the work!
|
|
*/
|
|
static void
|
|
ar71xx_chip_device_stop(uint32_t mask)
|
|
{
|
|
uint32_t reg;
|
|
|
|
reg = ATH_READ_REG(AR71XX_RST_RESET);
|
|
ATH_WRITE_REG(AR71XX_RST_RESET, reg | mask);
|
|
}
|
|
|
|
static void
|
|
ar71xx_chip_device_start(uint32_t mask)
|
|
{
|
|
uint32_t reg;
|
|
|
|
reg = ATH_READ_REG(AR71XX_RST_RESET);
|
|
ATH_WRITE_REG(AR71XX_RST_RESET, reg & ~mask);
|
|
}
|
|
|
|
static int
|
|
ar71xx_chip_device_stopped(uint32_t mask)
|
|
{
|
|
uint32_t reg;
|
|
|
|
reg = ATH_READ_REG(AR71XX_RST_RESET);
|
|
return ((reg & mask) == mask);
|
|
}
|
|
|
|
void
|
|
ar71xx_chip_set_mii_speed(uint32_t unit, uint32_t speed)
|
|
{
|
|
uint32_t val, reg, ctrl;
|
|
|
|
switch (unit) {
|
|
case 0:
|
|
reg = AR71XX_MII0_CTRL;
|
|
break;
|
|
case 1:
|
|
reg = AR71XX_MII1_CTRL;
|
|
break;
|
|
default:
|
|
printf("%s: invalid MII unit set for arge unit: %d\n",
|
|
__func__, unit);
|
|
return;
|
|
}
|
|
|
|
switch (speed) {
|
|
case 10:
|
|
ctrl = MII_CTRL_SPEED_10;
|
|
break;
|
|
case 100:
|
|
ctrl = MII_CTRL_SPEED_100;
|
|
break;
|
|
case 1000:
|
|
ctrl = MII_CTRL_SPEED_1000;
|
|
break;
|
|
default:
|
|
printf("%s: invalid MII speed (%d) set for arge unit: %d\n",
|
|
__func__, speed, unit);
|
|
return;
|
|
}
|
|
|
|
val = ATH_READ_REG(reg);
|
|
val &= ~(MII_CTRL_SPEED_MASK << MII_CTRL_SPEED_SHIFT);
|
|
val |= (ctrl & MII_CTRL_SPEED_MASK) << MII_CTRL_SPEED_SHIFT;
|
|
ATH_WRITE_REG(reg, val);
|
|
}
|
|
|
|
void
|
|
ar71xx_chip_set_mii_if(uint32_t unit, uint32_t mii_mode)
|
|
{
|
|
uint32_t val, reg, mii_if;
|
|
|
|
switch (unit) {
|
|
case 0:
|
|
reg = AR71XX_MII0_CTRL;
|
|
if (mii_mode == AR71XX_MII_MODE_GMII)
|
|
mii_if = MII0_CTRL_IF_GMII;
|
|
else if (mii_mode == AR71XX_MII_MODE_MII)
|
|
mii_if = MII0_CTRL_IF_MII;
|
|
else if (mii_mode == AR71XX_MII_MODE_RGMII)
|
|
mii_if = MII0_CTRL_IF_RGMII;
|
|
else if (mii_mode == AR71XX_MII_MODE_RMII)
|
|
mii_if = MII0_CTRL_IF_RMII;
|
|
else {
|
|
printf("%s: invalid MII mode (%d) for unit %d\n",
|
|
__func__, mii_mode, unit);
|
|
return;
|
|
}
|
|
break;
|
|
case 1:
|
|
reg = AR71XX_MII1_CTRL;
|
|
if (mii_mode == AR71XX_MII_MODE_RGMII)
|
|
mii_if = MII1_CTRL_IF_RGMII;
|
|
else if (mii_mode == AR71XX_MII_MODE_RMII)
|
|
mii_if = MII1_CTRL_IF_RMII;
|
|
else {
|
|
printf("%s: invalid MII mode (%d) for unit %d\n",
|
|
__func__, mii_mode, unit);
|
|
return;
|
|
}
|
|
break;
|
|
default:
|
|
printf("%s: invalid MII unit set for arge unit: %d\n",
|
|
__func__, unit);
|
|
return;
|
|
}
|
|
|
|
val = ATH_READ_REG(reg);
|
|
val &= ~(MII_CTRL_IF_MASK << MII_CTRL_IF_SHIFT);
|
|
val |= (mii_if & MII_CTRL_IF_MASK) << MII_CTRL_IF_SHIFT;
|
|
ATH_WRITE_REG(reg, val);
|
|
}
|
|
|
|
/* Speed is either 10, 100 or 1000 */
|
|
static void
|
|
ar71xx_chip_set_pll_ge(int unit, int speed, uint32_t pll)
|
|
{
|
|
|
|
switch (unit) {
|
|
case 0:
|
|
ar71xx_write_pll(AR71XX_PLL_SEC_CONFIG,
|
|
AR71XX_PLL_ETH_INT0_CLK, pll,
|
|
AR71XX_PLL_ETH0_SHIFT);
|
|
break;
|
|
case 1:
|
|
ar71xx_write_pll(AR71XX_PLL_SEC_CONFIG,
|
|
AR71XX_PLL_ETH_INT1_CLK, pll,
|
|
AR71XX_PLL_ETH1_SHIFT);
|
|
break;
|
|
default:
|
|
printf("%s: invalid PLL set for arge unit: %d\n",
|
|
__func__, unit);
|
|
return;
|
|
}
|
|
}
|
|
|
|
static void
|
|
ar71xx_chip_ddr_flush_ge(int unit)
|
|
{
|
|
|
|
switch (unit) {
|
|
case 0:
|
|
ar71xx_ddr_flush(AR71XX_WB_FLUSH_GE0);
|
|
break;
|
|
case 1:
|
|
ar71xx_ddr_flush(AR71XX_WB_FLUSH_GE1);
|
|
break;
|
|
default:
|
|
printf("%s: invalid DDR flush for arge unit: %d\n",
|
|
__func__, unit);
|
|
return;
|
|
}
|
|
}
|
|
|
|
static void
|
|
ar71xx_chip_ddr_flush_ip2(void)
|
|
{
|
|
ar71xx_ddr_flush(AR71XX_WB_FLUSH_PCI);
|
|
}
|
|
|
|
static uint32_t
|
|
ar71xx_chip_get_eth_pll(unsigned int mac, int speed)
|
|
{
|
|
uint32_t pll;
|
|
|
|
switch (speed) {
|
|
case 10:
|
|
pll = PLL_ETH_INT_CLK_10;
|
|
break;
|
|
case 100:
|
|
pll = PLL_ETH_INT_CLK_100;
|
|
break;
|
|
case 1000:
|
|
pll = PLL_ETH_INT_CLK_1000;
|
|
break;
|
|
default:
|
|
printf("%s%d: invalid speed %d\n", __func__, mac, speed);
|
|
pll = 0;
|
|
}
|
|
|
|
return (pll);
|
|
}
|
|
|
|
static void
|
|
ar71xx_chip_init_usb_peripheral(void)
|
|
{
|
|
|
|
ar71xx_device_stop(RST_RESET_USB_OHCI_DLL |
|
|
RST_RESET_USB_HOST | RST_RESET_USB_PHY);
|
|
DELAY(1000);
|
|
|
|
ar71xx_device_start(RST_RESET_USB_OHCI_DLL |
|
|
RST_RESET_USB_HOST | RST_RESET_USB_PHY);
|
|
DELAY(1000);
|
|
|
|
ATH_WRITE_REG(AR71XX_USB_CTRL_CONFIG,
|
|
USB_CTRL_CONFIG_OHCI_DES_SWAP |
|
|
USB_CTRL_CONFIG_OHCI_BUF_SWAP |
|
|
USB_CTRL_CONFIG_EHCI_DES_SWAP |
|
|
USB_CTRL_CONFIG_EHCI_BUF_SWAP);
|
|
|
|
ATH_WRITE_REG(AR71XX_USB_CTRL_FLADJ,
|
|
(32 << USB_CTRL_FLADJ_HOST_SHIFT) |
|
|
(3 << USB_CTRL_FLADJ_A5_SHIFT));
|
|
|
|
DELAY(1000);
|
|
}
|
|
|
|
struct ar71xx_cpu_def ar71xx_chip_def = {
|
|
&ar71xx_chip_detect_mem_size,
|
|
&ar71xx_chip_detect_sys_frequency,
|
|
&ar71xx_chip_device_stop,
|
|
&ar71xx_chip_device_start,
|
|
&ar71xx_chip_device_stopped,
|
|
&ar71xx_chip_set_pll_ge,
|
|
&ar71xx_chip_set_mii_speed,
|
|
&ar71xx_chip_set_mii_if,
|
|
&ar71xx_chip_ddr_flush_ge,
|
|
&ar71xx_chip_get_eth_pll,
|
|
&ar71xx_chip_ddr_flush_ip2,
|
|
&ar71xx_chip_init_usb_peripheral,
|
|
};
|