freebsd-skq/sys/netinet6/raw_ip6.c
rwatson 720efebbba Change semantics of socket close and detach. Add a new protocol switch
function, pru_close, to notify protocols that the file descriptor or
other consumer of a socket is closing the socket.  pru_abort is now a
notification of close also, and no longer detaches.  pru_detach is no
longer used to notify of close, and will be called during socket
tear-down by sofree() when all references to a socket evaporate after
an earlier call to abort or close the socket.  This means detach is now
an unconditional teardown of a socket, whereas previously sockets could
persist after detach of the protocol retained a reference.

This faciliates sharing mutexes between layers of the network stack as
the mutex is required during the checking and removal of references at
the head of sofree().  With this change, pru_detach can now assume that
the mutex will no longer be required by the socket layer after
completion, whereas before this was not necessarily true.

Reviewed by:	gnn
2006-07-21 17:11:15 +00:00

816 lines
20 KiB
C

/*-
* Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the project nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*-
* Copyright (c) 1982, 1986, 1988, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)raw_ip.c 8.2 (Berkeley) 1/4/94
*/
#include "opt_ipsec.h"
#include "opt_inet6.h"
#include <sys/param.h>
#include <sys/errno.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/proc.h>
#include <sys/protosw.h>
#include <sys/signalvar.h>
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/sx.h>
#include <sys/systm.h>
#include <sys/syslog.h>
#include <net/if.h>
#include <net/if_types.h>
#include <net/route.h>
#include <netinet/in.h>
#include <netinet/in_var.h>
#include <netinet/in_systm.h>
#include <netinet/icmp6.h>
#include <netinet/in_pcb.h>
#include <netinet/ip6.h>
#include <netinet6/ip6protosw.h>
#include <netinet6/ip6_mroute.h>
#include <netinet6/in6_pcb.h>
#include <netinet6/ip6_var.h>
#include <netinet6/nd6.h>
#include <netinet6/raw_ip6.h>
#include <netinet6/scope6_var.h>
#ifdef IPSEC
#include <netinet6/ipsec.h>
#include <netinet6/ipsec6.h>
#endif /*IPSEC*/
#ifdef FAST_IPSEC
#include <netipsec/ipsec.h>
#include <netipsec/ipsec6.h>
#endif /* FAST_IPSEC */
#include <machine/stdarg.h>
#define satosin6(sa) ((struct sockaddr_in6 *)(sa))
#define ifatoia6(ifa) ((struct in6_ifaddr *)(ifa))
/*
* Raw interface to IP6 protocol.
*/
extern struct inpcbhead ripcb;
extern struct inpcbinfo ripcbinfo;
extern u_long rip_sendspace;
extern u_long rip_recvspace;
struct rip6stat rip6stat;
/*
* Setup generic address and protocol structures
* for raw_input routine, then pass them along with
* mbuf chain.
*/
int
rip6_input(mp, offp, proto)
struct mbuf **mp;
int *offp, proto;
{
struct mbuf *m = *mp;
register struct ip6_hdr *ip6 = mtod(m, struct ip6_hdr *);
register struct inpcb *in6p;
struct inpcb *last = 0;
struct mbuf *opts = NULL;
struct sockaddr_in6 fromsa;
rip6stat.rip6s_ipackets++;
if (faithprefix_p != NULL && (*faithprefix_p)(&ip6->ip6_dst)) {
/* XXX send icmp6 host/port unreach? */
m_freem(m);
return IPPROTO_DONE;
}
init_sin6(&fromsa, m); /* general init */
INP_INFO_RLOCK(&ripcbinfo);
LIST_FOREACH(in6p, &ripcb, inp_list) {
INP_LOCK(in6p);
if ((in6p->in6p_vflag & INP_IPV6) == 0) {
docontinue:
INP_UNLOCK(in6p);
continue;
}
if (in6p->in6p_ip6_nxt &&
in6p->in6p_ip6_nxt != proto)
goto docontinue;
if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_laddr) &&
!IN6_ARE_ADDR_EQUAL(&in6p->in6p_laddr, &ip6->ip6_dst))
goto docontinue;
if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr) &&
!IN6_ARE_ADDR_EQUAL(&in6p->in6p_faddr, &ip6->ip6_src))
goto docontinue;
if (in6p->in6p_cksum != -1) {
rip6stat.rip6s_isum++;
if (in6_cksum(m, proto, *offp,
m->m_pkthdr.len - *offp)) {
rip6stat.rip6s_badsum++;
goto docontinue;
}
}
if (last) {
struct mbuf *n = m_copy(m, 0, (int)M_COPYALL);
#if defined(IPSEC) || defined(FAST_IPSEC)
/*
* Check AH/ESP integrity.
*/
if (n && ipsec6_in_reject(n, last)) {
m_freem(n);
#ifdef IPSEC
ipsec6stat.in_polvio++;
#endif /*IPSEC*/
/* do not inject data into pcb */
} else
#endif /*IPSEC || FAST_IPSEC*/
if (n) {
if (last->in6p_flags & IN6P_CONTROLOPTS ||
last->in6p_socket->so_options & SO_TIMESTAMP)
ip6_savecontrol(last, n, &opts);
/* strip intermediate headers */
m_adj(n, *offp);
if (sbappendaddr(&last->in6p_socket->so_rcv,
(struct sockaddr *)&fromsa,
n, opts) == 0) {
m_freem(n);
if (opts)
m_freem(opts);
rip6stat.rip6s_fullsock++;
} else
sorwakeup(last->in6p_socket);
opts = NULL;
}
INP_UNLOCK(last);
}
last = in6p;
}
#if defined(IPSEC) || defined(FAST_IPSEC)
/*
* Check AH/ESP integrity.
*/
if (last && ipsec6_in_reject(m, last)) {
m_freem(m);
#ifdef IPSEC
ipsec6stat.in_polvio++;
#endif /*IPSEC*/
ip6stat.ip6s_delivered--;
/* do not inject data into pcb */
INP_UNLOCK(last);
} else
#endif /*IPSEC || FAST_IPSEC*/
if (last) {
if (last->in6p_flags & IN6P_CONTROLOPTS ||
last->in6p_socket->so_options & SO_TIMESTAMP)
ip6_savecontrol(last, m, &opts);
/* strip intermediate headers */
m_adj(m, *offp);
if (sbappendaddr(&last->in6p_socket->so_rcv,
(struct sockaddr *)&fromsa, m, opts) == 0) {
m_freem(m);
if (opts)
m_freem(opts);
rip6stat.rip6s_fullsock++;
} else
sorwakeup(last->in6p_socket);
INP_UNLOCK(last);
} else {
rip6stat.rip6s_nosock++;
if (m->m_flags & M_MCAST)
rip6stat.rip6s_nosockmcast++;
if (proto == IPPROTO_NONE)
m_freem(m);
else {
char *prvnxtp = ip6_get_prevhdr(m, *offp); /* XXX */
icmp6_error(m, ICMP6_PARAM_PROB,
ICMP6_PARAMPROB_NEXTHEADER,
prvnxtp - mtod(m, char *));
}
ip6stat.ip6s_delivered--;
}
INP_INFO_RUNLOCK(&ripcbinfo);
return IPPROTO_DONE;
}
void
rip6_ctlinput(cmd, sa, d)
int cmd;
struct sockaddr *sa;
void *d;
{
struct ip6_hdr *ip6;
struct mbuf *m;
int off = 0;
struct ip6ctlparam *ip6cp = NULL;
const struct sockaddr_in6 *sa6_src = NULL;
void *cmdarg;
struct inpcb *(*notify) __P((struct inpcb *, int)) = in6_rtchange;
if (sa->sa_family != AF_INET6 ||
sa->sa_len != sizeof(struct sockaddr_in6))
return;
if ((unsigned)cmd >= PRC_NCMDS)
return;
if (PRC_IS_REDIRECT(cmd))
notify = in6_rtchange, d = NULL;
else if (cmd == PRC_HOSTDEAD)
d = NULL;
else if (inet6ctlerrmap[cmd] == 0)
return;
/* if the parameter is from icmp6, decode it. */
if (d != NULL) {
ip6cp = (struct ip6ctlparam *)d;
m = ip6cp->ip6c_m;
ip6 = ip6cp->ip6c_ip6;
off = ip6cp->ip6c_off;
cmdarg = ip6cp->ip6c_cmdarg;
sa6_src = ip6cp->ip6c_src;
} else {
m = NULL;
ip6 = NULL;
cmdarg = NULL;
sa6_src = &sa6_any;
}
(void) in6_pcbnotify(&ripcbinfo, sa, 0,
(const struct sockaddr *)sa6_src,
0, cmd, cmdarg, notify);
}
/*
* Generate IPv6 header and pass packet to ip6_output.
* Tack on options user may have setup with control call.
*/
int
#if __STDC__
rip6_output(struct mbuf *m, ...)
#else
rip6_output(m, va_alist)
struct mbuf *m;
va_dcl
#endif
{
struct mbuf *control;
struct socket *so;
struct sockaddr_in6 *dstsock;
struct in6_addr *dst;
struct ip6_hdr *ip6;
struct inpcb *in6p;
u_int plen = m->m_pkthdr.len;
int error = 0;
struct ip6_pktopts opt, *optp;
struct ifnet *oifp = NULL;
int type = 0, code = 0; /* for ICMPv6 output statistics only */
int priv = 0;
int scope_ambiguous = 0;
struct in6_addr *in6a;
va_list ap;
va_start(ap, m);
so = va_arg(ap, struct socket *);
dstsock = va_arg(ap, struct sockaddr_in6 *);
control = va_arg(ap, struct mbuf *);
va_end(ap);
in6p = sotoin6pcb(so);
INP_LOCK(in6p);
priv = 0;
if (suser_cred(so->so_cred, SUSER_ALLOWJAIL) == 0)
priv = 1;
dst = &dstsock->sin6_addr;
if (control) {
if ((error = ip6_setpktopts(control, &opt,
in6p->in6p_outputopts, priv, so->so_proto->pr_protocol))
!= 0) {
goto bad;
}
optp = &opt;
} else
optp = in6p->in6p_outputopts;
/*
* Check and convert scope zone ID into internal form.
* XXX: we may still need to determine the zone later.
*/
if (!(so->so_state & SS_ISCONNECTED)) {
if (dstsock->sin6_scope_id == 0 && !ip6_use_defzone)
scope_ambiguous = 1;
if ((error = sa6_embedscope(dstsock, ip6_use_defzone)) != 0)
goto bad;
}
/*
* For an ICMPv6 packet, we should know its type and code
* to update statistics.
*/
if (so->so_proto->pr_protocol == IPPROTO_ICMPV6) {
struct icmp6_hdr *icmp6;
if (m->m_len < sizeof(struct icmp6_hdr) &&
(m = m_pullup(m, sizeof(struct icmp6_hdr))) == NULL) {
error = ENOBUFS;
goto bad;
}
icmp6 = mtod(m, struct icmp6_hdr *);
type = icmp6->icmp6_type;
code = icmp6->icmp6_code;
}
M_PREPEND(m, sizeof(*ip6), M_DONTWAIT);
if (m == NULL) {
error = ENOBUFS;
goto bad;
}
ip6 = mtod(m, struct ip6_hdr *);
/*
* Source address selection.
*/
if ((in6a = in6_selectsrc(dstsock, optp, in6p->in6p_moptions, NULL,
&in6p->in6p_laddr, &oifp, &error)) == NULL) {
if (error == 0)
error = EADDRNOTAVAIL;
goto bad;
}
ip6->ip6_src = *in6a;
if (oifp && scope_ambiguous) {
/*
* Application should provide a proper zone ID or the use of
* default zone IDs should be enabled. Unfortunately, some
* applications do not behave as it should, so we need a
* workaround. Even if an appropriate ID is not determined
* (when it's required), if we can determine the outgoing
* interface. determine the zone ID based on the interface.
*/
error = in6_setscope(&dstsock->sin6_addr, oifp, NULL);
if (error != 0)
goto bad;
}
ip6->ip6_dst = dstsock->sin6_addr;
/* fill in the rest of the IPv6 header fields */
ip6->ip6_flow = (ip6->ip6_flow & ~IPV6_FLOWINFO_MASK) |
(in6p->in6p_flowinfo & IPV6_FLOWINFO_MASK);
ip6->ip6_vfc = (ip6->ip6_vfc & ~IPV6_VERSION_MASK) |
(IPV6_VERSION & IPV6_VERSION_MASK);
/* ip6_plen will be filled in ip6_output, so not fill it here. */
ip6->ip6_nxt = in6p->in6p_ip6_nxt;
ip6->ip6_hlim = in6_selecthlim(in6p, oifp);
if (so->so_proto->pr_protocol == IPPROTO_ICMPV6 ||
in6p->in6p_cksum != -1) {
struct mbuf *n;
int off;
u_int16_t *p;
/* compute checksum */
if (so->so_proto->pr_protocol == IPPROTO_ICMPV6)
off = offsetof(struct icmp6_hdr, icmp6_cksum);
else
off = in6p->in6p_cksum;
if (plen < off + 1) {
error = EINVAL;
goto bad;
}
off += sizeof(struct ip6_hdr);
n = m;
while (n && n->m_len <= off) {
off -= n->m_len;
n = n->m_next;
}
if (!n)
goto bad;
p = (u_int16_t *)(mtod(n, caddr_t) + off);
*p = 0;
*p = in6_cksum(m, ip6->ip6_nxt, sizeof(*ip6), plen);
}
error = ip6_output(m, optp, NULL, 0, in6p->in6p_moptions, &oifp, in6p);
if (so->so_proto->pr_protocol == IPPROTO_ICMPV6) {
if (oifp)
icmp6_ifoutstat_inc(oifp, type, code);
icmp6stat.icp6s_outhist[type]++;
} else
rip6stat.rip6s_opackets++;
goto freectl;
bad:
if (m)
m_freem(m);
freectl:
if (control) {
ip6_clearpktopts(&opt, -1);
m_freem(control);
}
INP_UNLOCK(in6p);
return (error);
}
/*
* Raw IPv6 socket option processing.
*/
int
rip6_ctloutput(so, sopt)
struct socket *so;
struct sockopt *sopt;
{
int error;
if (sopt->sopt_level == IPPROTO_ICMPV6)
/*
* XXX: is it better to call icmp6_ctloutput() directly
* from protosw?
*/
return (icmp6_ctloutput(so, sopt));
else if (sopt->sopt_level != IPPROTO_IPV6)
return (EINVAL);
error = 0;
switch (sopt->sopt_dir) {
case SOPT_GET:
switch (sopt->sopt_name) {
case MRT6_INIT:
case MRT6_DONE:
case MRT6_ADD_MIF:
case MRT6_DEL_MIF:
case MRT6_ADD_MFC:
case MRT6_DEL_MFC:
case MRT6_PIM:
error = ip6_mrouter_get(so, sopt);
break;
case IPV6_CHECKSUM:
error = ip6_raw_ctloutput(so, sopt);
break;
default:
error = ip6_ctloutput(so, sopt);
break;
}
break;
case SOPT_SET:
switch (sopt->sopt_name) {
case MRT6_INIT:
case MRT6_DONE:
case MRT6_ADD_MIF:
case MRT6_DEL_MIF:
case MRT6_ADD_MFC:
case MRT6_DEL_MFC:
case MRT6_PIM:
error = ip6_mrouter_set(so, sopt);
break;
case IPV6_CHECKSUM:
error = ip6_raw_ctloutput(so, sopt);
break;
default:
error = ip6_ctloutput(so, sopt);
break;
}
break;
}
return (error);
}
static int
rip6_attach(struct socket *so, int proto, struct thread *td)
{
struct inpcb *inp;
struct icmp6_filter *filter;
int error;
inp = sotoinpcb(so);
KASSERT(inp == NULL, ("rip6_attach: inp != NULL"));
if (td && (error = suser(td)) != 0)
return error;
error = soreserve(so, rip_sendspace, rip_recvspace);
if (error)
return error;
MALLOC(filter, struct icmp6_filter *,
sizeof(struct icmp6_filter), M_PCB, M_NOWAIT);
if (filter == NULL)
return ENOMEM;
INP_INFO_WLOCK(&ripcbinfo);
error = in_pcballoc(so, &ripcbinfo);
if (error) {
INP_INFO_WUNLOCK(&ripcbinfo);
FREE(filter, M_PCB);
return error;
}
inp = (struct inpcb *)so->so_pcb;
INP_INFO_WUNLOCK(&ripcbinfo);
inp->inp_vflag |= INP_IPV6;
inp->in6p_ip6_nxt = (long)proto;
inp->in6p_hops = -1; /* use kernel default */
inp->in6p_cksum = -1;
inp->in6p_icmp6filt = filter;
ICMP6_FILTER_SETPASSALL(inp->in6p_icmp6filt);
INP_UNLOCK(inp);
return 0;
}
static void
rip6_detach(struct socket *so)
{
struct inpcb *inp;
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("rip6_detach: inp == NULL"));
/* xxx: RSVP */
if (so == ip6_mrouter)
ip6_mrouter_done();
INP_INFO_WLOCK(&ripcbinfo);
INP_LOCK(inp);
if (inp->in6p_icmp6filt) {
FREE(inp->in6p_icmp6filt, M_PCB);
inp->in6p_icmp6filt = NULL;
}
in6_pcbdetach(inp);
in6_pcbfree(inp);
INP_INFO_WUNLOCK(&ripcbinfo);
}
/* XXXRW: This can't ever be called. */
static void
rip6_abort(struct socket *so)
{
struct inpcb *inp;
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("rip6_abort: inp == NULL"));
soisdisconnected(so);
}
static void
rip6_close(struct socket *so)
{
struct inpcb *inp;
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("rip6_close: inp == NULL"));
soisdisconnected(so);
}
static int
rip6_disconnect(struct socket *so)
{
struct inpcb *inp = sotoinpcb(so);
if ((so->so_state & SS_ISCONNECTED) == 0)
return ENOTCONN;
inp->in6p_faddr = in6addr_any;
rip6_abort(so);
return (0);
}
static int
rip6_bind(struct socket *so, struct sockaddr *nam, struct thread *td)
{
struct inpcb *inp = sotoinpcb(so);
struct sockaddr_in6 *addr = (struct sockaddr_in6 *)nam;
struct ifaddr *ia = NULL;
int error = 0;
KASSERT(inp != NULL, ("rip6_bind: inp == NULL"));
if (nam->sa_len != sizeof(*addr))
return EINVAL;
if (TAILQ_EMPTY(&ifnet) || addr->sin6_family != AF_INET6)
return EADDRNOTAVAIL;
if ((error = sa6_embedscope(addr, ip6_use_defzone)) != 0)
return(error);
if (!IN6_IS_ADDR_UNSPECIFIED(&addr->sin6_addr) &&
(ia = ifa_ifwithaddr((struct sockaddr *)addr)) == 0)
return EADDRNOTAVAIL;
if (ia &&
((struct in6_ifaddr *)ia)->ia6_flags &
(IN6_IFF_ANYCAST|IN6_IFF_NOTREADY|
IN6_IFF_DETACHED|IN6_IFF_DEPRECATED)) {
return (EADDRNOTAVAIL);
}
INP_INFO_WLOCK(&ripcbinfo);
INP_LOCK(inp);
inp->in6p_laddr = addr->sin6_addr;
INP_UNLOCK(inp);
INP_INFO_WUNLOCK(&ripcbinfo);
return 0;
}
static int
rip6_connect(struct socket *so, struct sockaddr *nam, struct thread *td)
{
struct inpcb *inp = sotoinpcb(so);
struct sockaddr_in6 *addr = (struct sockaddr_in6 *)nam;
struct in6_addr *in6a = NULL;
struct ifnet *ifp = NULL;
int error = 0, scope_ambiguous = 0;
KASSERT(inp != NULL, ("rip6_connect: inp == NULL"));
if (nam->sa_len != sizeof(*addr))
return EINVAL;
if (TAILQ_EMPTY(&ifnet))
return EADDRNOTAVAIL;
if (addr->sin6_family != AF_INET6)
return EAFNOSUPPORT;
/*
* Application should provide a proper zone ID or the use of
* default zone IDs should be enabled. Unfortunately, some
* applications do not behave as it should, so we need a
* workaround. Even if an appropriate ID is not determined,
* we'll see if we can determine the outgoing interface. If we
* can, determine the zone ID based on the interface below.
*/
if (addr->sin6_scope_id == 0 && !ip6_use_defzone)
scope_ambiguous = 1;
if ((error = sa6_embedscope(addr, ip6_use_defzone)) != 0)
return(error);
INP_INFO_WLOCK(&ripcbinfo);
INP_LOCK(inp);
/* Source address selection. XXX: need pcblookup? */
in6a = in6_selectsrc(addr, inp->in6p_outputopts,
inp->in6p_moptions, NULL,
&inp->in6p_laddr, &ifp, &error);
if (in6a == NULL) {
INP_UNLOCK(inp);
INP_INFO_WUNLOCK(&ripcbinfo);
return (error ? error : EADDRNOTAVAIL);
}
/* XXX: see above */
if (ifp && scope_ambiguous &&
(error = in6_setscope(&addr->sin6_addr, ifp, NULL)) != 0) {
INP_UNLOCK(inp);
INP_INFO_WUNLOCK(&ripcbinfo);
return(error);
}
inp->in6p_faddr = addr->sin6_addr;
inp->in6p_laddr = *in6a;
soisconnected(so);
INP_UNLOCK(inp);
INP_INFO_WUNLOCK(&ripcbinfo);
return 0;
}
static int
rip6_shutdown(struct socket *so)
{
struct inpcb *inp;
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("rip6_shutdown: inp == NULL"));
INP_LOCK(inp);
socantsendmore(so);
INP_UNLOCK(inp);
return 0;
}
static int
rip6_send(struct socket *so, int flags, struct mbuf *m, struct sockaddr *nam,
struct mbuf *control, struct thread *td)
{
struct inpcb *inp = sotoinpcb(so);
struct sockaddr_in6 tmp;
struct sockaddr_in6 *dst;
int ret;
KASSERT(inp != NULL, ("rip6_send: inp == NULL"));
INP_INFO_WLOCK(&ripcbinfo);
/* always copy sockaddr to avoid overwrites */
/* Unlocked read. */
if (so->so_state & SS_ISCONNECTED) {
if (nam) {
INP_INFO_WUNLOCK(&ripcbinfo);
m_freem(m);
return EISCONN;
}
/* XXX */
bzero(&tmp, sizeof(tmp));
tmp.sin6_family = AF_INET6;
tmp.sin6_len = sizeof(struct sockaddr_in6);
bcopy(&inp->in6p_faddr, &tmp.sin6_addr,
sizeof(struct in6_addr));
dst = &tmp;
} else {
if (nam == NULL) {
INP_INFO_WUNLOCK(&ripcbinfo);
m_freem(m);
return ENOTCONN;
}
if (nam->sa_len != sizeof(struct sockaddr_in6)) {
INP_INFO_WUNLOCK(&ripcbinfo);
m_freem(m);
return(EINVAL);
}
tmp = *(struct sockaddr_in6 *)nam;
dst = &tmp;
if (dst->sin6_family == AF_UNSPEC) {
/*
* XXX: we allow this case for backward
* compatibility to buggy applications that
* rely on old (and wrong) kernel behavior.
*/
log(LOG_INFO, "rip6 SEND: address family is "
"unspec. Assume AF_INET6\n");
dst->sin6_family = AF_INET6;
} else if (dst->sin6_family != AF_INET6) {
INP_INFO_WUNLOCK(&ripcbinfo);
m_freem(m);
return(EAFNOSUPPORT);
}
}
ret = rip6_output(m, so, dst, control);
INP_INFO_WUNLOCK(&ripcbinfo);
return (ret);
}
struct pr_usrreqs rip6_usrreqs = {
.pru_abort = rip6_abort,
.pru_attach = rip6_attach,
.pru_bind = rip6_bind,
.pru_connect = rip6_connect,
.pru_control = in6_control,
.pru_detach = rip6_detach,
.pru_disconnect = rip6_disconnect,
.pru_peeraddr = in6_setpeeraddr,
.pru_send = rip6_send,
.pru_shutdown = rip6_shutdown,
.pru_sockaddr = in6_setsockaddr,
.pru_close = rip6_close,
};