d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
575d95316f
freebsd-skq/sys/pci
History
Stefan Eßer 575d95316f Remove use of intrec*, use void* instead. 
Disable test entries for wired PCI devices on bus 1.
1997-05-30 20:58:04 +00:00
..
aic7870.c The register definitions are now in the compile directory. 1997-03-16 07:12:36 +00:00
brktree_reg.h 1.15 4/18/97 John-Mark Gurney <gurney_j@resnet.uoregon.edu> 1997-05-01 00:16:31 +00:00
brooktree848.c use frames instead of fields, and restore full meteor compatibility for 1997-05-05 20:54:54 +00:00
bt9xx.c Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not 1997-02-22 09:48:43 +00:00
cy_pci.c Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not 1997-02-22 09:48:43 +00:00
cy_pcireg.h Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not 1997-02-22 09:48:43 +00:00
dc21040.h Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not 1997-02-22 09:48:43 +00:00
if_de.c Recognize ZNYX 314 cards that have a MAC address with the low bit set. 1997-04-05 07:59:41 +00:00
if_ed_p.c Rearrange pci network card identification for easier additions. 1997-04-18 04:44:37 +00:00
if_en_pci.c import Chuck Cranor's ATM driver 1997-05-09 07:48:14 +00:00
if_fpa.c Don't include <sys/ioctl.h> in the kernel. Stage 1: don't include 1997-03-24 11:25:10 +00:00
if_fxp.c Check that the received packet length indicated by the card is at least 1997-04-23 01:44:30 +00:00
if_fxpreg.h Added support for newer cards that have the DP83840A PHY chip. 1997-03-21 08:00:13 +00:00
if_lnc_p.c Deleted <pc98/pc98/pc98_device.h>. 1997-04-04 16:44:52 +00:00
if_sr_p.c Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not 1997-02-22 09:48:43 +00:00
if_vx_pci.c
locate.pl
meteor_reg.h
meteor.c Don't include <sys/ioctl.h> in the kernel. Stage 1: don't include 1997-03-24 11:25:10 +00:00
ncr.c Fixed the type of timeout functions and removed casts that hid the 1997-04-20 15:48:17 +00:00
ncrreg.h Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not 1997-02-22 09:48:43 +00:00
pci_compat.c Remove use of intrec*, use void* instead. 1997-05-30 20:58:04 +00:00
pci_ioctl.h
pci.c Two minor changes to the code that builds the pci map array: 1997-05-28 10:01:03 +00:00
pcireg.h Add one more compatibility define to make the Adaptec driver compile 1997-05-28 20:37:19 +00:00
pcisupport.c Completely replace the PCI bus driver code to make it better reflect 1997-05-26 15:08:43 +00:00
pcivar.h Completely replace the PCI bus driver code to make it better reflect 1997-05-26 15:08:43 +00:00
README.bt848 Fixed omission of reference to ioctl_bt848.h when installing on 2.2. 1997-05-01 00:42:54 +00:00
README.de Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not 1997-02-22 09:48:43 +00:00
README.de-le Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not 1997-02-22 09:48:43 +00:00
scsiiom.c
tek390.c Completely replace the PCI bus driver code to make it better reflect 1997-05-26 15:08:43 +00:00
tek390.h
wd82371.c Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not 1997-02-22 09:48:43 +00:00
wd82371reg.h Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not 1997-02-22 09:48:43 +00:00
wdc_p.c Move CMD640 option from kernel Makefile into opt_wd.h 1997-04-28 19:26:18 +00:00

README.de-le 

$Id$

----------------

The enclosed drivers should be considered beta-test software.  These
drivers are in no way supported by Digital Equipment.  See the
disclaimers in the sources for more information.  Please be aware that
Digital does not employee me to write drivers for FreeBSD.

This kit contains one driver:

	de	DEC DE435 PCI NIC or compatible

See README.de for information and installation instruction specific to this
driver.

Could you please send me the startup messages in the boot
long along with the type of your PC once the driver configures?  

If you have any problems, comments, suggestions, rant or raves, don't
hesitate to send me mail @ thomas@lkg.dec.com.

Lastly, if you change or modify the code, I want context diffs of your
changes.  I want this to the canonical DEC EtherWORKS driver kit for
FreeBSD, NetBSD, BSD/386, and any other BSD based O/S.  Please make
sure your diffs are approriate conditionalized.

Thanks,
Matt Thomas
--
Mail:	thomas@lkg.dec.com
URL:	http://ftp.digital.com/~thomas/