b178649de8
translation. In particular, despite IO-APICs only take 8bit apic id, IR translation structures accept 32bit APIC Id, which allows x2APIC mode to function properly. Extend msi_cpu of struct msi_intrsrc and io_cpu of ioapic_intsrc to full int from one byte. KPI of IR is isolated into the x86/iommu/iommu_intrmap.h, to avoid bringing all dmar headers into interrupt code. The non-PCI(e) devices which generate message interrupts on FSB require special handling. The HPET FSB interrupts are remapped, while DMAR interrupts are not. For each msi and ioapic interrupt source, the iommu cookie is added, which is in fact index of the IRE (interrupt remap entry) in the IR table. Cookie is made at the source allocation time, and then used at the map time to fill both IRE and device registers. The MSI address/data registers and IO-APIC redirection registers are programmed with the special values which are recognized by IR and used to restore the IRE index, to find proper delivery mode and target. Map all MSI interrupts in the block when msi_map() is called. Since an interrupt source setup and dismantle code are done in the non-sleepable context, flushing interrupt entries cache in the IR hardware, which is done async and ideally waits for the interrupt, requires busy-wait for queue to drain. The dmar_qi_wait_for_seq() is modified to take a boolean argument requesting busy-wait for the written sequence number instead of waiting for interrupt. Some interrupts are configured before IR is initialized, e.g. ACPI SCI. Add intr_reprogram() function to reprogram all already configured interrupts, and call it immediately before an IR unit is enabled. There is still a small window after the IO-APIC redirection entry is reprogrammed with cookie but before the unit is enabled, but to fix this properly, IR must be started much earlier. Add workarounds for 5500 and X58 northbridges, some revisions of which have severe flaws in handling IR. Use the same identification methods as employed by Linux. Review: https://reviews.freebsd.org/D1892 Reviewed by: neel Discussed with: jhb Tested by: glebius, pho (previous versions) Sponsored by: The FreeBSD Foundation MFC after: 3 weeks
189 lines
6.4 KiB
C
189 lines
6.4 KiB
C
/*-
|
|
* Copyright (c) 2003 John Baldwin <jhb@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#ifndef __MACHINE_INTR_MACHDEP_H__
|
|
#define __MACHINE_INTR_MACHDEP_H__
|
|
|
|
#ifdef _KERNEL
|
|
|
|
/*
|
|
* The maximum number of I/O interrupts we allow. This number is rather
|
|
* arbitrary as it is just the maximum IRQ resource value. The interrupt
|
|
* source for a given IRQ maps that I/O interrupt to device interrupt
|
|
* source whether it be a pin on an interrupt controller or an MSI interrupt.
|
|
* The 16 ISA IRQs are assigned fixed IDT vectors, but all other device
|
|
* interrupts allocate IDT vectors on demand. Currently we have 191 IDT
|
|
* vectors available for device interrupts. On many systems with I/O APICs,
|
|
* a lot of the IRQs are not used, so this number can be much larger than
|
|
* 191 and still be safe since only interrupt sources in actual use will
|
|
* allocate IDT vectors.
|
|
*
|
|
* The first 255 IRQs (0 - 254) are reserved for ISA IRQs and PCI intline IRQs.
|
|
* IRQ values from 256 to 767 are used by MSI. When running under the Xen
|
|
* Hypervisor, IRQ values from 768 to 4863 are available for binding to
|
|
* event channel events. We leave 255 unused to avoid confusion since 255 is
|
|
* used in PCI to indicate an invalid IRQ.
|
|
*/
|
|
#define NUM_MSI_INTS 512
|
|
#define FIRST_MSI_INT 256
|
|
#ifdef XENHVM
|
|
#include <xen/xen-os.h>
|
|
#define NUM_EVTCHN_INTS NR_EVENT_CHANNELS
|
|
#define FIRST_EVTCHN_INT \
|
|
(FIRST_MSI_INT + NUM_MSI_INTS)
|
|
#define LAST_EVTCHN_INT \
|
|
(FIRST_EVTCHN_INT + NUM_EVTCHN_INTS - 1)
|
|
#else
|
|
#define NUM_EVTCHN_INTS 0
|
|
#endif
|
|
#define NUM_IO_INTS (FIRST_MSI_INT + NUM_MSI_INTS + NUM_EVTCHN_INTS)
|
|
|
|
/*
|
|
* Default base address for MSI messages on x86 platforms.
|
|
*/
|
|
#define MSI_INTEL_ADDR_BASE 0xfee00000
|
|
|
|
/*
|
|
* - 1 ??? dummy counter.
|
|
* - 2 counters for each I/O interrupt.
|
|
* - 1 counter for each CPU for lapic timer.
|
|
* - 8 counters for each CPU for IPI counters for SMP.
|
|
*/
|
|
#ifdef SMP
|
|
#define INTRCNT_COUNT (1 + NUM_IO_INTS * 2 + (1 + 8) * MAXCPU)
|
|
#else
|
|
#define INTRCNT_COUNT (1 + NUM_IO_INTS * 2 + 1)
|
|
#endif
|
|
|
|
#ifndef LOCORE
|
|
|
|
typedef void inthand_t(u_int cs, u_int ef, u_int esp, u_int ss);
|
|
|
|
#define IDTVEC(name) __CONCAT(X,name)
|
|
|
|
struct intsrc;
|
|
|
|
/*
|
|
* Methods that a PIC provides to mask/unmask a given interrupt source,
|
|
* "turn on" the interrupt on the CPU side by setting up an IDT entry, and
|
|
* return the vector associated with this source.
|
|
*/
|
|
struct pic {
|
|
void (*pic_enable_source)(struct intsrc *);
|
|
void (*pic_disable_source)(struct intsrc *, int);
|
|
void (*pic_eoi_source)(struct intsrc *);
|
|
void (*pic_enable_intr)(struct intsrc *);
|
|
void (*pic_disable_intr)(struct intsrc *);
|
|
int (*pic_vector)(struct intsrc *);
|
|
int (*pic_source_pending)(struct intsrc *);
|
|
void (*pic_suspend)(struct pic *);
|
|
void (*pic_resume)(struct pic *, bool suspend_cancelled);
|
|
int (*pic_config_intr)(struct intsrc *, enum intr_trigger,
|
|
enum intr_polarity);
|
|
int (*pic_assign_cpu)(struct intsrc *, u_int apic_id);
|
|
void (*pic_reprogram_pin)(struct intsrc *);
|
|
TAILQ_ENTRY(pic) pics;
|
|
};
|
|
|
|
/* Flags for pic_disable_source() */
|
|
enum {
|
|
PIC_EOI,
|
|
PIC_NO_EOI,
|
|
};
|
|
|
|
/*
|
|
* An interrupt source. The upper-layer code uses the PIC methods to
|
|
* control a given source. The lower-layer PIC drivers can store additional
|
|
* private data in a given interrupt source such as an interrupt pin number
|
|
* or an I/O APIC pointer.
|
|
*/
|
|
struct intsrc {
|
|
struct pic *is_pic;
|
|
struct intr_event *is_event;
|
|
u_long *is_count;
|
|
u_long *is_straycount;
|
|
u_int is_index;
|
|
u_int is_handlers;
|
|
};
|
|
|
|
struct trapframe;
|
|
|
|
/*
|
|
* The following data structure holds per-cpu data, and is placed just
|
|
* above the top of the space used for the NMI stack.
|
|
*/
|
|
struct nmi_pcpu {
|
|
register_t np_pcpu;
|
|
register_t __padding; /* pad to 16 bytes */
|
|
};
|
|
|
|
extern struct mtx icu_lock;
|
|
extern int elcr_found;
|
|
|
|
#ifndef DEV_ATPIC
|
|
void atpic_reset(void);
|
|
#endif
|
|
/* XXX: The elcr_* prototypes probably belong somewhere else. */
|
|
int elcr_probe(void);
|
|
enum intr_trigger elcr_read_trigger(u_int irq);
|
|
void elcr_resume(void);
|
|
void elcr_write_trigger(u_int irq, enum intr_trigger trigger);
|
|
#ifdef SMP
|
|
void intr_add_cpu(u_int cpu);
|
|
#endif
|
|
int intr_add_handler(const char *name, int vector, driver_filter_t filter,
|
|
driver_intr_t handler, void *arg, enum intr_type flags,
|
|
void **cookiep);
|
|
#ifdef SMP
|
|
int intr_bind(u_int vector, u_char cpu);
|
|
#endif
|
|
int intr_config_intr(int vector, enum intr_trigger trig,
|
|
enum intr_polarity pol);
|
|
int intr_describe(u_int vector, void *ih, const char *descr);
|
|
void intr_execute_handlers(struct intsrc *isrc, struct trapframe *frame);
|
|
u_int intr_next_cpu(void);
|
|
struct intsrc *intr_lookup_source(int vector);
|
|
int intr_register_pic(struct pic *pic);
|
|
int intr_register_source(struct intsrc *isrc);
|
|
int intr_remove_handler(void *cookie);
|
|
void intr_resume(bool suspend_cancelled);
|
|
void intr_suspend(void);
|
|
void intr_reprogram(void);
|
|
void intrcnt_add(const char *name, u_long **countp);
|
|
void nexus_add_irq(u_long irq);
|
|
int msi_alloc(device_t dev, int count, int maxcount, int *irqs);
|
|
void msi_init(void);
|
|
int msi_map(int irq, uint64_t *addr, uint32_t *data);
|
|
int msi_release(int *irqs, int count);
|
|
int msix_alloc(device_t dev, int *irq);
|
|
int msix_release(int irq);
|
|
|
|
#endif /* !LOCORE */
|
|
#endif /* _KERNEL */
|
|
#endif /* !__MACHINE_INTR_MACHDEP_H__ */
|