58c13f9b7a
card bus bridges. We now always use pci interrupts for pci cards. This will allow us to more easily configure things. You must change your IRQ lines in /etc/pccard.conf to match what we've probed. I'm not sure the right way to deal with this right now. Development of pci pcmcia has been funded by Monzoon Networks AG. I am grateful for their generosity.
595 lines
17 KiB
C
595 lines
17 KiB
C
/*
|
|
* Copyright (c) 2001 M. Warner Losh. All Rights Reserved.
|
|
* Copyright (c) 1997 Ted Faber All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice immediately at the beginning of the file, without modification,
|
|
* this list of conditions, and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Absolutely no warranty of function or purpose is made by the author
|
|
* Ted Faber.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
#include <sys/systm.h>
|
|
|
|
#include <dev/pci/pcireg.h>
|
|
#include <dev/pci/pcivar.h>
|
|
|
|
#include <pccard/pcic_pci.h>
|
|
#include <pccard/i82365.h>
|
|
#include <pccard/cardinfo.h>
|
|
#include <pccard/slot.h>
|
|
#include <pccard/pcicvar.h>
|
|
|
|
#include <dev/pccard/pccardvar.h>
|
|
#include "card_if.h"
|
|
|
|
#define PRVERB(x) if (bootverbose) device_printf x
|
|
|
|
static int pcic_pci_get_memory(device_t dev);
|
|
|
|
struct pcic_pci_table
|
|
{
|
|
u_int32_t devid;
|
|
const char *descr;
|
|
int type;
|
|
u_int32_t flags;
|
|
int revision;
|
|
} pcic_pci_devs[] = {
|
|
{ PCI_DEVICE_ID_PCIC_CLPD6729,
|
|
"Cirrus Logic PD6729/6730 PC-Card Controller" },
|
|
{ PCI_DEVICE_ID_PCIC_CLPD6832,
|
|
"Cirrus Logic PD6832 PCI-CardBus Bridge" },
|
|
{ PCI_DEVICE_ID_PCIC_CLPD6833,
|
|
"Cirrus Logic PD6833 PCI-CardBus Bridge" },
|
|
{ PCI_DEVICE_ID_PCIC_OZ6729,
|
|
"O2micro OZ6729 PC-Card Bridge" },
|
|
{ PCI_DEVICE_ID_PCIC_OZ6730,
|
|
"O2micro OZ6730 PC-Card Bridge" },
|
|
{ PCI_DEVICE_ID_PCIC_OZ6832,
|
|
"O2micro 6832/6833 PCI-Cardbus Bridge" },
|
|
{ PCI_DEVICE_ID_PCIC_OZ6860,
|
|
"O2micro 6860/6836 PCI-Cardbus Bridge" },
|
|
{ PCI_DEVICE_ID_PCIC_OZ6872,
|
|
"O2micro 6812/6872 PCI-Cardbus Bridge" },
|
|
{ PCI_DEVICE_ID_RICOH_RL5C465,
|
|
"Ricoh RL5C465 PCI-CardBus Bridge" },
|
|
{ PCI_DEVICE_ID_RICOH_RL5C475,
|
|
"Ricoh RL5C475 PCI-CardBus Bridge" },
|
|
{ PCI_DEVICE_ID_RICOH_RL5C476,
|
|
"Ricoh RL5C476 PCI-CardBus Bridge" },
|
|
{ PCI_DEVICE_ID_RICOH_RL5C477,
|
|
"Ricoh RL5C477 PCI-CardBus Bridge" },
|
|
{ PCI_DEVICE_ID_RICOH_RL5C478,
|
|
"Ricoh RL5C478 PCI-CardBus Bridge" },
|
|
{ PCI_DEVICE_ID_PCIC_TI1031,
|
|
"TI PCI-1031 PCI-PCMCIA Bridge" },
|
|
{ PCI_DEVICE_ID_PCIC_TI1130,
|
|
"TI PCI-1130 PCI-CardBus Bridge" },
|
|
{ PCI_DEVICE_ID_PCIC_TI1131,
|
|
"TI PCI-1131 PCI-CardBus Bridge" },
|
|
{ PCI_DEVICE_ID_PCIC_TI1211,
|
|
"TI PCI-1211 PCI-CardBus Bridge" },
|
|
{ PCI_DEVICE_ID_PCIC_TI1220,
|
|
"TI PCI-1220 PCI-CardBus Bridge" },
|
|
{ PCI_DEVICE_ID_PCIC_TI1221,
|
|
"TI PCI-1221 PCI-CardBus Bridge" },
|
|
{ PCI_DEVICE_ID_PCIC_TI1225,
|
|
"TI PCI-1225 PCI-CardBus Bridge" },
|
|
{ PCI_DEVICE_ID_PCIC_TI1250,
|
|
"TI PCI-1250 PCI-CardBus Bridge" },
|
|
{ PCI_DEVICE_ID_PCIC_TI1251,
|
|
"TI PCI-1251 PCI-CardBus Bridge" },
|
|
{ PCI_DEVICE_ID_PCIC_TI1251B,
|
|
"TI PCI-1251B PCI-CardBus Bridge" },
|
|
{ PCI_DEVICE_ID_PCIC_TI1410,
|
|
"TI PCI-1410 PCI-CardBus Bridge" },
|
|
{ PCI_DEVICE_ID_PCIC_TI1420,
|
|
"TI PCI-1420 PCI-CardBus Bridge" },
|
|
{ PCI_DEVICE_ID_PCIC_TI1450,
|
|
"TI PCI-1450 PCI-CardBus Bridge" },
|
|
{ PCI_DEVICE_ID_PCIC_TI1451,
|
|
"TI PCI-1451 PCI-CardBus Bridge" },
|
|
{ PCI_DEVICE_ID_PCIC_TI4451,
|
|
"TI PCI-4451 PCI-CardBus Bridge" },
|
|
{ PCI_DEVICE_ID_TOSHIBA_TOPIC95,
|
|
"Toshiba ToPIC95 PCI-CardBus Bridge" },
|
|
{ PCI_DEVICE_ID_TOSHIBA_TOPIC97,
|
|
"Toshiba ToPIC97 PCI-CardBus Bridge" },
|
|
{ PCI_DEVICE_ID_TOSHIBA_TOPIC100,
|
|
"Toshiba ToPIC100 PCI-CardBus Bridge" },
|
|
{ 0, NULL, 0, 0 }
|
|
};
|
|
|
|
/*
|
|
* Read a register from the PCIC.
|
|
*/
|
|
static unsigned char
|
|
pcic_pci_getb2(struct pcic_slot *sp, int reg)
|
|
{
|
|
return (bus_space_read_1(sp->bst, sp->bsh, sp->offset + reg));
|
|
}
|
|
|
|
/*
|
|
* Write a register on the PCIC
|
|
*/
|
|
static void
|
|
pcic_pci_putb2(struct pcic_slot *sp, int reg, unsigned char val)
|
|
{
|
|
bus_space_write_1(sp->bst, sp->bsh, sp->offset + reg, val);
|
|
}
|
|
|
|
/*
|
|
* lookup inside the table
|
|
*/
|
|
static struct pcic_pci_table *
|
|
pcic_pci_lookup(u_int32_t devid, struct pcic_pci_table *tbl)
|
|
{
|
|
while (tbl->devid) {
|
|
if (tbl->devid == devid)
|
|
return (tbl);
|
|
tbl++;
|
|
}
|
|
return (NULL);
|
|
}
|
|
|
|
/*
|
|
* Set up the CL-PD6832
|
|
*/
|
|
static void
|
|
pcic_pci_pd6832_init(device_t dev)
|
|
{
|
|
u_long bcr; /* to set interrupts */
|
|
|
|
/*
|
|
* CLPD683X management interrupt enable bit is bit 11 in bridge
|
|
* control register(offset 0x3d).
|
|
* When this bit is turned on, card status change interrupt sets
|
|
* on ISA IRQ interrupt.
|
|
*/
|
|
bcr = pci_read_config(dev, CB_PCI_BRIDGE_CTRL, 2);
|
|
bcr |= CLPD6832_BCR_MGMT_IRQ_ENA;
|
|
pci_write_config(dev, CB_PCI_BRIDGE_CTRL, bcr, 2);
|
|
}
|
|
|
|
/*
|
|
* TI PCI-CardBus Host Adapter specific function code.
|
|
* This function is separated from pcic_pci_attach().
|
|
* Takeshi Shibagaki(shiba@jp.freebsd.org).
|
|
*/
|
|
static void
|
|
pcic_pci_ti_init(device_t dev)
|
|
{
|
|
u_long syscntl,devcntl,cardcntl;
|
|
u_int32_t device_id = pci_get_devid(dev);
|
|
char buf[128];
|
|
struct pcic_softc *sc = device_get_softc(dev);
|
|
int ti113x = (device_id == PCI_DEVICE_ID_PCIC_TI1130)
|
|
|| (device_id == PCI_DEVICE_ID_PCIC_TI1131);
|
|
|
|
syscntl = pci_read_config(dev, TI113X_PCI_SYSTEM_CONTROL, 4);
|
|
devcntl = pci_read_config(dev, TI113X_PCI_DEVICE_CONTROL, 1);
|
|
cardcntl = pci_read_config(dev, TI113X_PCI_CARD_CONTROL, 1);
|
|
|
|
switch(ti113x){
|
|
case 0 :
|
|
strcpy(buf, "TI12XX PCI Config Reg: ");
|
|
break;
|
|
case 1 :
|
|
strcpy(buf, "TI113X PCI Config Reg: ");
|
|
/*
|
|
* Default card control register setting is
|
|
* PCI interrupt. The method of this code
|
|
* switches PCI INT and ISA IRQ by bit 7 of
|
|
* Bridge Control Register(Offset:0x3e,0x13e).
|
|
* Takeshi Shibagaki(shiba@jp.freebsd.org)
|
|
*/
|
|
if (sc->func_route == pci_parallel) {
|
|
cardcntl |= TI113X_CARDCNTL_PCI_IRQ_ENA;
|
|
cardcntl &= ~TI113X_CARDCNTL_PCI_IREQ;
|
|
} else {
|
|
cardcntl |= TI113X_CARDCNTL_PCI_IREQ;
|
|
}
|
|
if (sc->csc_route == pci_parallel)
|
|
cardcntl |= TI113X_CARDCNTL_PCI_CSC;
|
|
else
|
|
cardcntl &= ~TI113X_CARDCNTL_PCI_CSC;
|
|
pci_write_config(dev, TI113X_PCI_CARD_CONTROL, cardcntl, 1);
|
|
cardcntl = pci_read_config(dev, TI113X_PCI_CARD_CONTROL, 1);
|
|
if (syscntl & TI113X_SYSCNTL_CLKRUN_ENA) {
|
|
if (syscntl & TI113X_SYSCNTL_CLKRUN_SEL)
|
|
strcat(buf, "[clkrun irq 12]");
|
|
else
|
|
strcat(buf, "[clkrun irq 10]");
|
|
}
|
|
break;
|
|
}
|
|
if (sc->func_route == pci_parallel) {
|
|
devcntl &= ~TI113X_DEVCNTL_INTR_MASK;
|
|
pci_write_config(dev, TI113X_PCI_DEVICE_CONTROL, devcntl, 1);
|
|
devcntl = pci_read_config(dev, TI113X_PCI_DEVICE_CONTROL, 1);
|
|
syscntl |= TI113X_SYSCNTL_INTRTIE;
|
|
syscntl &= ~TI113X_SYSCNTL_SMIENB;
|
|
pci_write_config(dev, TI113X_PCI_SYSTEM_CONTROL, syscntl, 1);
|
|
}
|
|
if (cardcntl & TI113X_CARDCNTL_RING_ENA)
|
|
strcat(buf, "[ring enable]");
|
|
if (cardcntl & TI113X_CARDCNTL_SPKR_ENA)
|
|
strcat(buf, "[speaker enable]");
|
|
if (syscntl & TI113X_SYSCNTL_PWRSAVINGS)
|
|
strcat(buf, "[pwr save]");
|
|
switch(devcntl & TI113X_DEVCNTL_INTR_MASK){
|
|
case TI113X_DEVCNTL_INTR_ISA :
|
|
strcat(buf, "[CSC parallel isa irq]");
|
|
break;
|
|
case TI113X_DEVCNTL_INTR_SERIAL :
|
|
strcat(buf, "[CSC serial isa irq]");
|
|
break;
|
|
case TI113X_DEVCNTL_INTR_NONE :
|
|
strcat(buf, "[pci only]");
|
|
break;
|
|
case TI12XX_DEVCNTL_INTR_ALLSERIAL :
|
|
strcat(buf, "[FUNC pci int + CSC serial isa irq]");
|
|
break;
|
|
}
|
|
device_printf(dev, "%s\n",buf);
|
|
}
|
|
|
|
static void
|
|
pcic_pci_cardbus_init(device_t dev)
|
|
{
|
|
u_int16_t brgcntl;
|
|
int unit;
|
|
struct pcic_softc *sc = device_get_softc(dev);
|
|
|
|
unit = device_get_unit(dev);
|
|
|
|
if (sc->func_route == pci_parallel) {
|
|
/* Use INTA for routing interrupts via pci bus */
|
|
brgcntl = pci_read_config(dev, CB_PCI_BRIDGE_CTRL, 2);
|
|
brgcntl &= ~CB_BCR_INT_EXCA;
|
|
brgcntl |= CB_BCR_WRITE_POST_EN | CB_BCR_MASTER_ABORT;
|
|
pci_write_config(dev, CB_PCI_BRIDGE_CTRL, brgcntl, 2);
|
|
} else {
|
|
/* Output ISA IRQ indicated in ExCA register(0x03). */
|
|
brgcntl = pci_read_config(dev, CB_PCI_BRIDGE_CTRL, 2);
|
|
brgcntl |= CB_BCR_INT_EXCA;
|
|
pci_write_config(dev, CB_PCI_BRIDGE_CTRL, brgcntl, 2);
|
|
}
|
|
|
|
/* Turn off legacy address */
|
|
pci_write_config(dev, CB_PCI_LEGACY16_IOADDR, 0, 2);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
pcic_pci_ricoh_init(device_t dev, int old)
|
|
{
|
|
u_int16_t brgcntl;
|
|
|
|
/*
|
|
* Ricoh chips have a legacy bridge enable different than most
|
|
* Code cribbed from NEWBUS's bridge code since I can't find a
|
|
* datasheet for them that has register definitions.
|
|
*/
|
|
if (old) {
|
|
brgcntl = pci_read_config(dev, CB_PCI_BRIDGE_CTRL, 2);
|
|
brgcntl &= ~(CB_BCR_RL_3E2_EN | CB_BCR_RL_3E0_EN);
|
|
pci_write_config(dev, CB_PCI_BRIDGE_CTRL, brgcntl, 2);
|
|
}
|
|
}
|
|
|
|
static void
|
|
pcic_cd_event(void *arg)
|
|
{
|
|
struct pcic_softc *sc = (struct pcic_softc *) arg;
|
|
struct pcic_slot *sp = &sc->slots[0];
|
|
u_int32_t stat;
|
|
|
|
stat = bus_space_read_4(sp->bst, sp->bsh, CB_SOCKET_STATE);
|
|
printf("State is %x\n", stat);
|
|
if (stat & CB_SS_5VCARD)
|
|
device_printf(sp->sc->dev, "5V card\n");
|
|
if (stat & CB_SS_3VCARD)
|
|
device_printf(sp->sc->dev, "3V card\n");
|
|
if (stat & CB_SS_CD)
|
|
device_printf(sp->sc->dev, "CD %x",
|
|
stat & CB_SS_CD);
|
|
if ((stat & CB_SS_16BIT) == 0) {
|
|
device_printf(sp->sc->dev,
|
|
"Cardbus card inserted. NOT SUPPORTED\n");
|
|
} else {
|
|
if (stat & CB_SS_CD)
|
|
pccard_event(sp->slt, card_removed);
|
|
else
|
|
pccard_event(sp->slt, card_inserted);
|
|
}
|
|
sc->cd_pending = 0;
|
|
}
|
|
|
|
static void
|
|
pcic_pci_intr(void *arg)
|
|
{
|
|
struct pcic_softc *sc = (struct pcic_softc *) arg;
|
|
struct pcic_slot *sp = &sc->slots[0];
|
|
u_int32_t event;
|
|
|
|
event = bus_space_read_4(sp->bst, sp->bsh, CB_SOCKET_EVENT);
|
|
if (event & CB_SE_CD) {
|
|
if (!sc->cd_pending) {
|
|
sc->cd_pending = 1;
|
|
timeout(pcic_cd_event, arg, hz/2);
|
|
}
|
|
}
|
|
/* Ack the interrupt, all of them to be safe */
|
|
bus_space_write_4(sp->bst, sp->bsh, 0, 0xffffffff);
|
|
}
|
|
|
|
/*
|
|
* Return the ID string for the controller if the vendor/product id
|
|
* matches, NULL otherwise.
|
|
*/
|
|
static int
|
|
pcic_pci_probe(device_t dev)
|
|
{
|
|
u_int8_t subclass;
|
|
u_int8_t progif;
|
|
const char *desc;
|
|
u_int32_t device_id;
|
|
struct pcic_pci_table *itm;
|
|
struct resource *res;
|
|
int rid;
|
|
|
|
device_id = pci_get_devid(dev);
|
|
desc = NULL;
|
|
itm = pcic_pci_lookup(device_id, &pcic_pci_devs[0]);
|
|
if (itm != NULL)
|
|
desc = itm->descr;
|
|
if (desc == NULL) {
|
|
if (pci_get_class(dev) == PCIC_BRIDGE) {
|
|
subclass = pci_get_subclass(dev);
|
|
progif = pci_get_progif(dev);
|
|
if (subclass == PCIS_BRIDGE_PCMCIA && progif == 0)
|
|
desc = "Generic PCI-PCMCIA Bridge";
|
|
if (subclass == PCIS_BRIDGE_CARDBUS && progif == 0)
|
|
desc = "YENTA PCI-CARDBUS Bridge";
|
|
}
|
|
}
|
|
if (desc == NULL)
|
|
return (ENXIO);
|
|
device_set_desc(dev, desc);
|
|
|
|
/*
|
|
* Allocated/deallocate interrupt. This forces the PCI BIOS or
|
|
* other MD method to route the interrupts to this card.
|
|
*/
|
|
rid = 0;
|
|
res = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1, RF_ACTIVE);
|
|
if (res)
|
|
bus_release_resource(dev, SYS_RES_IRQ, rid, res);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* General PCI based card dispatch routine. Right now
|
|
* it only understands the Ricoh, CL-PD6832 and TI parts. It does
|
|
* try to do generic things with other parts.
|
|
*/
|
|
static int
|
|
pcic_pci_attach(device_t dev)
|
|
{
|
|
u_int32_t device_id = pci_get_devid(dev);
|
|
u_long command;
|
|
struct pcic_slot *sp;
|
|
struct pcic_softc *sc;
|
|
u_int32_t sockbase;
|
|
struct pcic_pci_table *itm;
|
|
int rid;
|
|
struct resource *r;
|
|
int error;
|
|
|
|
/*
|
|
* In sys/pci/pcireg.h, PCIR_COMMAND must be separated
|
|
* PCI_COMMAND_REG(0x04) and PCI_STATUS_REG(0x06).
|
|
* Takeshi Shibagaki(shiba@jp.freebsd.org).
|
|
*/
|
|
command = pci_read_config(dev, PCIR_COMMAND, 4);
|
|
command |= PCIM_CMD_PORTEN | PCIM_CMD_MEMEN;
|
|
pci_write_config(dev, PCIR_COMMAND, command, 4);
|
|
|
|
sc = (struct pcic_softc *) device_get_softc(dev);
|
|
sp = &sc->slots[0];
|
|
sp->sc = sc;
|
|
sockbase = pci_read_config(dev, 0x10, 4);
|
|
if (sockbase & 0x1) {
|
|
device_printf(dev, "I/O mapped device!\n");
|
|
return (EIO);
|
|
} else {
|
|
sc->memrid = CB_PCI_SOCKET_BASE;
|
|
sc->memres = bus_alloc_resource(dev, SYS_RES_MEMORY,
|
|
&sc->memrid, 0, ~0, 1, RF_ACTIVE);
|
|
if (sc->memres == NULL && pcic_pci_get_memory(dev) != 0)
|
|
return (ENOMEM);
|
|
sp->getb = pcic_pci_getb2;
|
|
sp->putb = pcic_pci_putb2;
|
|
sp->offset = CB_EXCA_OFFSET;
|
|
sc->bst = sp->bst = rman_get_bustag(sc->memres);
|
|
sc->bst = sp->bsh = rman_get_bushandle(sc->memres);
|
|
itm = pcic_pci_lookup(device_id, &pcic_pci_devs[0]);
|
|
if (itm != NULL) {
|
|
sp->controller = itm->type;
|
|
sp->revision = itm->revision;
|
|
sc->flags = itm->flags;
|
|
sc->flags = PCIC_AB_POWER;
|
|
} else {
|
|
/* By default, assume we're a D step compatible */
|
|
sp->controller = PCIC_I82365SL_DF;
|
|
sp->revision = 0;
|
|
sc->flags = PCIC_DF_POWER;
|
|
}
|
|
sp->slt = (struct slot *) 1;
|
|
}
|
|
sc->dev = dev;
|
|
sc->csc_route = pci_parallel;
|
|
sc->func_route = pci_parallel;
|
|
|
|
switch (device_id) {
|
|
case PCI_DEVICE_ID_RICOH_RL5C465:
|
|
case PCI_DEVICE_ID_RICOH_RL5C466:
|
|
pcic_pci_ricoh_init(dev, 1);
|
|
pcic_pci_cardbus_init(dev);
|
|
break;
|
|
case PCI_DEVICE_ID_RICOH_RL5C475:
|
|
case PCI_DEVICE_ID_RICOH_RL5C476:
|
|
case PCI_DEVICE_ID_RICOH_RL5C477:
|
|
case PCI_DEVICE_ID_RICOH_RL5C478:
|
|
pcic_pci_ricoh_init(dev, 0);
|
|
pcic_pci_cardbus_init(dev);
|
|
break;
|
|
case PCI_DEVICE_ID_PCIC_TI1031:
|
|
case PCI_DEVICE_ID_PCIC_TI1130:
|
|
case PCI_DEVICE_ID_PCIC_TI1131:
|
|
case PCI_DEVICE_ID_PCIC_TI1211:
|
|
case PCI_DEVICE_ID_PCIC_TI1220:
|
|
case PCI_DEVICE_ID_PCIC_TI1221:
|
|
case PCI_DEVICE_ID_PCIC_TI1225:
|
|
case PCI_DEVICE_ID_PCIC_TI1250:
|
|
case PCI_DEVICE_ID_PCIC_TI1251:
|
|
case PCI_DEVICE_ID_PCIC_TI1251B:
|
|
case PCI_DEVICE_ID_PCIC_TI1410:
|
|
case PCI_DEVICE_ID_PCIC_TI1420:
|
|
case PCI_DEVICE_ID_PCIC_TI1450:
|
|
case PCI_DEVICE_ID_PCIC_TI1451:
|
|
case PCI_DEVICE_ID_PCIC_TI4451:
|
|
pcic_pci_ti_init(dev);
|
|
pcic_pci_cardbus_init(dev);
|
|
break;
|
|
case PCI_DEVICE_ID_PCIC_CLPD6832:
|
|
pcic_pci_pd6832_init(dev);
|
|
break;
|
|
default:
|
|
pcic_pci_cardbus_init(dev);
|
|
break;
|
|
}
|
|
|
|
rid = 0;
|
|
r = NULL;
|
|
r = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1,
|
|
RF_ACTIVE | RF_SHAREABLE);
|
|
if (r == NULL) {
|
|
device_printf(dev, "Failed to allocate managment irq\n");
|
|
return (EIO);
|
|
}
|
|
sc->irqrid = rid;
|
|
sc->irqres = r;
|
|
error = bus_setup_intr(dev, r, INTR_TYPE_MISC, pcic_pci_intr,
|
|
(void *) sc, &sc->ih);
|
|
if (error) {
|
|
pcic_dealloc(dev);
|
|
return (error);
|
|
}
|
|
|
|
return (pcic_attach(dev));
|
|
}
|
|
|
|
static int
|
|
pcic_pci_detach(device_t dev)
|
|
{
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* The PCI bus should do this for us. However, it doesn't quite yet, so
|
|
* we cope by doing it ourselves. If it ever does, this code can go quietly
|
|
* into that good night.
|
|
*/
|
|
static int
|
|
pcic_pci_get_memory(device_t dev)
|
|
{
|
|
struct pcic_softc *sc;
|
|
u_int32_t sockbase;
|
|
|
|
sc = (struct pcic_softc *) device_get_softc(dev);
|
|
sockbase = pci_read_config(dev, sc->memrid, 4);
|
|
if (sockbase >= 0x100000 && sockbase < 0xfffffff0) {
|
|
device_printf(dev, "Could not map register memory\n");
|
|
return (ENOMEM);
|
|
}
|
|
pci_write_config(dev, sc->memrid, 0xffffffff, 4);
|
|
sockbase = pci_read_config(dev, sc->memrid, 4);
|
|
sockbase = (sockbase & 0xfffffff0) & -(sockbase & 0xfffffff0);
|
|
#define CARDBUS_SYS_RES_MEMORY_START 0x44000000
|
|
#define CARDBUS_SYS_RES_MEMORY_END 0xEFFFFFFF
|
|
sc->memres = bus_generic_alloc_resource(device_get_parent(dev),
|
|
dev, SYS_RES_MEMORY, &sc->memrid,
|
|
CARDBUS_SYS_RES_MEMORY_START, CARDBUS_SYS_RES_MEMORY_END,
|
|
sockbase, RF_ACTIVE | rman_make_alignment_flags(sockbase));
|
|
if (sc->memres == NULL) {
|
|
device_printf(dev, "Could not grab register memory\n");
|
|
return (ENOMEM);
|
|
}
|
|
sockbase = rman_get_start(sc->memres);
|
|
pci_write_config(dev, sc->memrid, sockbase, 4);
|
|
device_printf(dev, "PCI Memory allocated: 0x%08x\n", sockbase);
|
|
return (0);
|
|
}
|
|
|
|
static device_method_t pcic_pci_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, pcic_pci_probe),
|
|
DEVMETHOD(device_attach, pcic_pci_attach),
|
|
DEVMETHOD(device_detach, pcic_pci_detach),
|
|
DEVMETHOD(device_suspend, bus_generic_suspend),
|
|
DEVMETHOD(device_resume, bus_generic_resume),
|
|
DEVMETHOD(device_shutdown, bus_generic_shutdown),
|
|
|
|
/* Bus interface */
|
|
DEVMETHOD(bus_print_child, bus_generic_print_child),
|
|
DEVMETHOD(bus_alloc_resource, pcic_alloc_resource),
|
|
DEVMETHOD(bus_release_resource, bus_generic_release_resource),
|
|
DEVMETHOD(bus_activate_resource, pcic_activate_resource),
|
|
DEVMETHOD(bus_deactivate_resource, pcic_deactivate_resource),
|
|
DEVMETHOD(bus_setup_intr, pcic_setup_intr),
|
|
DEVMETHOD(bus_teardown_intr, pcic_teardown_intr),
|
|
|
|
/* Card interface */
|
|
DEVMETHOD(card_set_res_flags, pcic_set_res_flags),
|
|
DEVMETHOD(card_get_res_flags, pcic_get_res_flags),
|
|
DEVMETHOD(card_set_memory_offset, pcic_set_memory_offset),
|
|
DEVMETHOD(card_get_memory_offset, pcic_get_memory_offset),
|
|
|
|
{0, 0}
|
|
};
|
|
|
|
static driver_t pcic_pci_driver = {
|
|
"pcic",
|
|
pcic_pci_methods,
|
|
sizeof(struct pcic_softc)
|
|
};
|
|
|
|
DRIVER_MODULE(pcic, pci, pcic_pci_driver, pcic_devclass, 0, 0);
|