7716c5370a
(I had been busy for my own research activity until the last weekend) Supported devices: SB Midi Port (sbc + midi) SB OPL3 (sbc + midi) 16550 UART (midi, needs a trick in your hint) CS461x Midi Port (csa + midi) OSS-compatible sequencer (seq) Supported playing software: playmidi (We definitely need more) Notes: /dev/midistat now reports installed midi drivers. /dev/sndstat reports only pcm drivers. We need the new name(pcmstat?). EMU8000(SB AWE) does not sound yet but does get probed so that the OPL3 synth on an AWE card works. TODO: MSS/PCI bridge drivers Midi-tty interface to support general serial devices Modules
1572 lines
36 KiB
Bash
1572 lines
36 KiB
Bash
#!/bin/sh -
|
|
#
|
|
# Copyright (c) 1990 The Regents of the University of California.
|
|
# All rights reserved.
|
|
#
|
|
# Written and contributed by W. Jolitz 12/90
|
|
#
|
|
# Redistribution and use in source and binary forms are permitted provided
|
|
# that: (1) source distributions retain this entire copyright notice and
|
|
# comment, and (2) distributions including binaries display the following
|
|
# acknowledgement: ``This product includes software developed by the
|
|
# University of California, Berkeley and its contributors'' in the
|
|
# documentation or other materials provided with the distribution and in
|
|
# all advertising materials mentioning features or use of this software.
|
|
# Neither the name of the University nor the names of its contributors may
|
|
# be used to endorse or promote products derived from this software without
|
|
# specific prior written permission.
|
|
# THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
|
|
# WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
|
|
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
|
|
#
|
|
# @(#)MAKEDEV 5.2 (Berkeley) 6/22/90
|
|
# $FreeBSD$
|
|
#
|
|
# Device "make" file. Valid arguments:
|
|
# all makes all known devices, standard number of units (or close)
|
|
# std standard devices
|
|
# jail suitable for a jail(8)
|
|
# local configuration specific devices
|
|
# mach-4 mach4&lites+devices for Mach's XFree86 distribution
|
|
# (see http://www.cs.hut.fi/lites.html for more info on LITES)
|
|
#
|
|
# Tapes:
|
|
# wt* QIC-interfaced (e.g. not SCSI) 3M cartridge tape
|
|
# sa* SCSI Sequential Access Devices
|
|
#
|
|
# Disks:
|
|
# acd* ATAPI CD-ROM disks
|
|
# amrd* AMI MegaRAID
|
|
# cd* SCSI CD-ROM disks
|
|
# da* SCSI Direct Access Devices
|
|
# fd* floppy disk drives (3 1/2", 5 1/4")
|
|
# fla* M-Systems DiskOnChip
|
|
# idad* Compaq Smart-2 RAID arrays
|
|
# matcd* Matsushita (Panasonic) CD-ROM disks
|
|
# mcd* Mitsumi CD-ROM disks
|
|
# md* Memory (or malloc) disk
|
|
# mlx* Mylex DAC960 RAID controllers
|
|
# mlxd* Mylex DAC960 RAID disk volumes
|
|
# scd* Sony CD-ROM disks
|
|
# vn* vnode disks
|
|
# wd* "Winchester" disk drives (ST506,IDE,ESDI,RLL,...)
|
|
# wfd* IDE floppy disk drives (LS-120)
|
|
#
|
|
# Console ports:
|
|
# vty* virtual console devices for syscons/pcvt/codrv
|
|
#
|
|
# Pointing devices:
|
|
# mse* Logitech and ATI Inport bus mouse
|
|
# psm* PS/2 mouse
|
|
# sysmouse Mousesystems mouse emulator for syscons
|
|
#
|
|
# Time devices:
|
|
# refclock-* serial ports used by xntpd parse refclocks
|
|
#
|
|
# Terminal ports:
|
|
# tty* general purpose serial ports
|
|
# cua* dialout serial ports
|
|
# ttyA* Specialix SI/XIO dialin ports ('*' = number of devices)
|
|
# cuaA* Specialix SI/XIO dialout ports
|
|
# ttyD* Digiboard - 16 dialin ports
|
|
# cuaD* Digiboard - 16 dialout ports
|
|
# ttyR* Rocketport dialin ports
|
|
# cuaR* Rocketport dialout ports
|
|
#
|
|
# Pseudo terminals:
|
|
# pty* set of 32 master and slave pseudo terminals
|
|
# vty* virtual terminals using syscons/pcvt/codrv console
|
|
#
|
|
# Parallel port:
|
|
# lpt* Printer
|
|
# ppi* Parallel port i/o
|
|
# pps* Pulse per second timing interface
|
|
# pcfclock* Parallel time sync interface
|
|
#
|
|
# I2C and SMBus:
|
|
# iic* I2C devices
|
|
# smb* SMBUS devices
|
|
#
|
|
# USB devices:
|
|
# usb* USB bus control device
|
|
# uhid* Human Interface Device (HID)
|
|
# ums* mouse
|
|
# ulpt* printer
|
|
# ugen* generic USB device
|
|
# urio* Diamond Rio 500
|
|
# usio* USB serial devices
|
|
#
|
|
# SCSI devices (other than CD-ROM, tape and disk):
|
|
# ch* SCSI Media-Changer (juke box) driver
|
|
# worm* WORM driver
|
|
# pt* Processor Type (HP scanner, as one example)
|
|
# pass* CAM Passthrough device
|
|
# ses* SES (SCSI Environmental Services) and
|
|
# SAF-TE (Scsi Accessable Fault-Tolerant Enclosures) device
|
|
#
|
|
# PC-CARD (previously called PCMCIA) support
|
|
# card* PC-CARD slots
|
|
#
|
|
# ISDN devices:
|
|
# i4b isdnd call control device
|
|
# i4bctl debugging control device
|
|
# i4btrc* trace data interface(s), one per passive card
|
|
# i4btel* telephony interface(s)
|
|
# i4bteld* telephony dialout interface(s)
|
|
# i4brbch* raw b channel access device(s)
|
|
#
|
|
# Special purpose devices:
|
|
# apm Advanced Power Management BIOS
|
|
# apmctl APM BIOS control device
|
|
# bpf* packet filter
|
|
# speaker pc speaker
|
|
# tw* xten power controller
|
|
# snd* various sound cards
|
|
# pcaudio PCM audio driver
|
|
# socksys iBCS2 socket system driver
|
|
# vat VAT compatibility audio driver (requires snd*)
|
|
# gsc Genius GS-4500 hand scanner
|
|
# joy pc joystick
|
|
# tun* Tunneling IP device
|
|
# snp* tty snoop devices
|
|
# spigot Video Spigot video acquisition card
|
|
# ctx* Cortex-I video acquisition card
|
|
# meteor* Matrox Meteor video acquisition card (pci)
|
|
# bktr* Bt848 based video acquisition card (pci)
|
|
# labpc* National Instrument's Lab-PC and LAB-PC+
|
|
# perfmon CPU performance-monitoring counters
|
|
# pci PCI configuration-space access from user mode
|
|
# ipl ipfilter control devices (ipl, ipnat, ipstate, ipauth)
|
|
# kbd keyboard devices
|
|
# 3dfx* 3dfx voodoo device for glide (tdfx), links 3dfx to 3dfx#
|
|
#
|
|
|
|
if [ -n "$MAKEDEVPATH" ]; then
|
|
PATH="$MAKEDEVPATH"
|
|
else
|
|
PATH=/sbin:/bin
|
|
fi
|
|
umask 77
|
|
|
|
# Usage: die exitcode msg
|
|
die() {
|
|
echo $2
|
|
exit $1
|
|
}
|
|
|
|
# Convert integer to partition name
|
|
dkitop() {
|
|
local p
|
|
|
|
case $1 in
|
|
0) p=a;; 1) p=b;; 2) p=c;; 3) p=d;; 4) p=e;; 5) p=f;; 6) p=g;; 7) p=h;;
|
|
*) p="?";;
|
|
esac
|
|
echo $p
|
|
}
|
|
|
|
# Convert integer to slice name
|
|
dkitos() {
|
|
local s
|
|
|
|
case $1 in
|
|
0) s="";;
|
|
1) s="";;
|
|
*) s=s$(($1-1));;
|
|
esac
|
|
echo $s
|
|
}
|
|
|
|
# Convert disk (type, unit, slice, partition) to minor number
|
|
dkminor()
|
|
{
|
|
echo $(($1 << 25 | ($2 / 32) << 21 | ($2 % 32) << 3 | $3 << 16 | $4))
|
|
}
|
|
|
|
# Override mknod(2) to add extra handling to it.
|
|
mknod() {
|
|
rm -f "$1" || exit 1
|
|
case $# in
|
|
4) /sbin/mknod "$@" root:wheel || die 2 "/sbin/mknod $@ failed";;
|
|
5) /sbin/mknod "$@" || die 2 "/sbin/mknod $@ failed";;
|
|
*) die 2 "bad node: mknod $@";;
|
|
esac
|
|
}
|
|
|
|
# Convert tape (ctrl, unit, mode, access) to minor number
|
|
saminor()
|
|
{
|
|
echo $(($1 << 29 | ($2 / 16) << 16 | ($2 % 16) << 4 | $3 << 2 | $4))
|
|
}
|
|
|
|
# Convert the last character of a tty name to a minor number.
|
|
ttyminor()
|
|
{
|
|
case $unit in
|
|
[0-9]) m=$unit;;
|
|
a) m=10;; b) m=11;; c) m=12;; d) m=13;; e) m=14;; f) m=15;; g) m=16;;
|
|
h) m=17;; i) m=18;; j) m=19;; k) m=20;; l) m=21;; m) m=22;; n) m=23;;
|
|
o) m=24;; p) m=25;; q) m=26;; r) m=27;; s) m=28;; t) m=29;; u) m=30;;
|
|
v) m=31;;
|
|
*) m="?";;
|
|
esac
|
|
echo $m
|
|
}
|
|
|
|
# Raw partition for disks
|
|
dkrawpart=2
|
|
|
|
# Compatibility slice for disks
|
|
dkcompatslice=0
|
|
|
|
# Raw slice for disks
|
|
dkrawslice=1
|
|
|
|
# Standard umasks
|
|
disk_umask=037 # allow group operator to read disks
|
|
tape_umask=017 # allow group operator to read/write tapes
|
|
|
|
for i in $*; do
|
|
case $i in
|
|
|
|
all)
|
|
sh MAKEDEV std # standard
|
|
sh MAKEDEV fd0 fd1 # bdev, floppy disk
|
|
sh MAKEDEV da0 da1 da2 da3 # bdev, SCSI disk
|
|
sh MAKEDEV ad0 ad1 ad2 ad3 # bdev, ATA disk
|
|
sh MAKEDEV acd0 afd0 ast0 # bdev, ATAPI devices
|
|
sh MAKEDEV wd0 wd1 wd2 wd3 # bdev, OLD disk
|
|
sh MAKEDEV wcd0 wfd0 wst0 # bdev, OLD ATAPI devs
|
|
sh MAKEDEV vn0 # bdev, virtual disk
|
|
sh MAKEDEV cd0 matcd0 mcd0 scd0 # bdev, cdrom
|
|
sh MAKEDEV sa0 wt0 # bdev, tape
|
|
sh MAKEDEV vty12 # cdev, virtual tty
|
|
sh MAKEDEV cuaa0 cuaa1 cuaa2 cuaa3 # cdev, serial tty
|
|
sh MAKEDEV pty0 # cdev, pseudo tty
|
|
sh MAKEDEV ttyd0 ttyd1 ttyd2 ttyd3 # cdev, serial tty
|
|
sh MAKEDEV kbd0 kbd1 # cdev, keyboard
|
|
sh MAKEDEV mse0 psm0 sysmouse # cdev, mouse
|
|
sh MAKEDEV pcaudio speaker # cdev, noise
|
|
sh MAKEDEV lpt0 lpt1 lpt2 # cdev, printer
|
|
sh MAKEDEV ppi0 ppi1 ppi2 # cdev, parallel port
|
|
sh MAKEDEV iic0 iic1 # cdev, I2C device
|
|
sh MAKEDEV smb0 smb1 # cdev, SMBus device
|
|
sh MAKEDEV usb usb0 uhid0 ums0 ulpt0 ugen0 # cdev, USB devices
|
|
sh MAKEDEV urio0 # cdev, USB devices too
|
|
sh MAKEDEV bpf0 bpf1 bpf2 bpf3 # cdev, network
|
|
sh MAKEDEV ipl tun0 tun1 tun2 tun3 # cdev, network
|
|
sh MAKEDEV ch0 perfmon tw0 # cdev, miscellaneous
|
|
sh MAKEDEV apm apmctl card0 card1 card2 card3 # cdev, laptop
|
|
sh MAKEDEV pass4 xpt2 # cdev, CAM
|
|
sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1 # cdev, ISDN
|
|
sh MAKEDEV i4btel0 i4btel1 i4bteld0 i4bteld1 # cdev, ISDN
|
|
sh MAKEDEV i4brbch0 i4brbch1 # cdev, ISDN
|
|
;;
|
|
|
|
# a much restricted set of the above, to save precious i-nodes on the
|
|
# fixit floppy
|
|
fixit)
|
|
sh MAKEDEV std # standard
|
|
sh MAKEDEV fd0 # bdev, floppy disk
|
|
sh MAKEDEV da0 # bdev, SCSI disk
|
|
sh MAKEDEV ad0 # bdev, ATA disk
|
|
sh MAKEDEV acd0 afd0 ast0 # bdev, ATAPI devices
|
|
sh MAKEDEV wd0 # bdev, OLD disk
|
|
sh MAKEDEV wcd0 wfd0 wst0 # bdev, OLD ATAPI devs
|
|
sh MAKEDEV vn0 # bdev, virtual disk
|
|
sh MAKEDEV cd0 # bdev, cdrom
|
|
sh MAKEDEV sa0 # bdev, tape
|
|
sh MAKEDEV vty2 # cdev, virtual tty
|
|
sh MAKEDEV cuaa0 # cdev, serial tty
|
|
sh MAKEDEV pty0 # cdev, pseudo tty
|
|
sh MAKEDEV ttyd0 # cdev, serial tty
|
|
sh MAKEDEV kbd0 # cdev, keyboard
|
|
sh MAKEDEV mse0 psm0 sysmouse # cdev, mouse
|
|
sh MAKEDEV lpt0 # cdev, printer
|
|
sh MAKEDEV ppi0 # cdev, parallel port
|
|
sh MAKEDEV iic0 # cdev, I2C device
|
|
sh MAKEDEV smb0 # cdev, SMBus device
|
|
sh MAKEDEV ums0 # cdev, USB devices
|
|
sh MAKEDEV tun0 # cdev, network
|
|
sh MAKEDEV ch0 # cdev, miscellaneous
|
|
sh MAKEDEV apm apmctl card0 # cdev, laptop
|
|
sh MAKEDEV pass1 xpt1 # cdev, CAM
|
|
sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1 # cdev, ISDN
|
|
sh MAKEDEV i4btel0 i4bteld0 # cdev, ISDN
|
|
sh MAKEDEV i4brbch0 # cdev, ISDN
|
|
rm -f fd/[1-9]?
|
|
;;
|
|
|
|
std)
|
|
mknod console c 0 0; chmod 600 console
|
|
mknod kmem c 2 1 root:kmem; chmod 640 kmem
|
|
mknod mem c 2 0 root:kmem; chmod 640 mem
|
|
mknod null c 2 2; chmod 666 null
|
|
mknod random c 2 3; chmod 644 random
|
|
ln -sf random urandom
|
|
mknod zero c 2 12; chmod 666 zero
|
|
mknod io c 2 14; chmod 600 io
|
|
mknod tty c 1 0; chmod 666 tty
|
|
mknod klog c 7 0; chmod 600 klog
|
|
mknod pci c 78 0; chmod 644 pci
|
|
mkdir -p fd
|
|
(cd fd && i=0 &&
|
|
while [ $i -lt 64 ]; do
|
|
mknod $i c 22 $i
|
|
i=$(($i + 1))
|
|
done
|
|
)
|
|
chmod 555 fd
|
|
chmod 666 fd/*
|
|
ln -sf fd/0 stdin
|
|
ln -sf fd/1 stdout
|
|
ln -sf fd/2 stderr
|
|
;;
|
|
|
|
jail)
|
|
sh MAKEDEV std pty0
|
|
rm mem kmem pci io klog console # for security
|
|
ln -sf null mem # for libkvm (ab)users
|
|
ln -sf null kmem # --//--
|
|
ln -sf null console
|
|
;;
|
|
|
|
mach-4)
|
|
mknod iopl c 22 0
|
|
mknod kbd c 23 0
|
|
mknod mouse c 24 0
|
|
mknod time c 25 0
|
|
mknod timezone c 26 0
|
|
;;
|
|
|
|
# Create device files for new Archive/Wangtek QIC-02 tape driver (vak)
|
|
wt*)
|
|
umask $tape_umask
|
|
u=`expr $i : '..\(.*\)'`
|
|
if [ -z "${u}" ]; then u=0; fi
|
|
# default density, 512b blocks
|
|
mknod rwt${u} c 10 `expr 0 + $u` root:operator
|
|
mknod nrwt${u} c 10 `expr 4 + $u` root:operator
|
|
# default density, 1024b blocks
|
|
# mknod rWt${u} c 10 `expr 64 + $u` root:operator
|
|
# mknod nrWt${u} c 10 `expr 68 + $u` root:operator
|
|
mknod rwt${u}b c 10 `expr 16 + $u` root:operator # 60 megabytes
|
|
mknod nrwt${u}b c 10 `expr 20 + $u` root:operator
|
|
mknod rwt${u}c c 10 `expr 24 + $u` root:operator # 120 megabytes
|
|
mknod nrwt${u}c c 10 `expr 28 + $u` root:operator
|
|
mknod rwt${u}d c 10 `expr 32 + $u` root:operator # 150 megabytes
|
|
mknod nrwt${u}d c 10 `expr 36 + $u` root:operator
|
|
# mknod rwt${u}e c 10 `expr 40 + $u` root:operator # 300 megabytes?
|
|
# mknod nrwt${u}e c 10 `expr 44 + $u` root:operator
|
|
# mknod rwt${u}f c 10 `expr 48 + $u` root:operator # 600 megabytes?
|
|
# mknod nrwt${u}f c 10 `expr 52 + $u` root:operator
|
|
umask 77
|
|
;;
|
|
|
|
# Individual slices.
|
|
ad*s*|afd*s*|amrd*s*|da*s*|fla*s*|idad*s*|md*s*|mlxd*s*|twed*s*|vn*s*|wd*s*|wfd*s*)
|
|
umask $disk_umask
|
|
case $i in
|
|
ad*s*) name=ad; chr=116;;
|
|
afd*s*) name=afd; chr=118;;
|
|
amrd*s*) name=amrd; chr=133;;
|
|
da*s*) name=da; chr=13;;
|
|
fla*s*) name=fla; chr=102;;
|
|
idad*s*) name=idad; chr=109;;
|
|
md*s*) name=md; chr=95;;
|
|
mlxd*s*) name=mlxd; chr=131;;
|
|
twed*s*) name=twed; chr=147;;
|
|
vn*s*) name=vn; chr=43;;
|
|
wd*s*) name=wd; chr=3;;
|
|
wfd*s*) name=wfd; chr=87;;
|
|
esac
|
|
case $i in
|
|
amrd*s*|idad*s*|mlxd*s*|twed*s*)
|
|
unit=`expr $i : '....\([0-9]*\)s'`
|
|
slice=`expr $i : '....[0-9]*s\([0-9]*\)'`
|
|
part=`expr $i : '....[0-9]*s[0-9]*\(.*\)'`
|
|
;;
|
|
afd*s*|fla*s*|wfd*s*)
|
|
unit=`expr $i : '...\([0-9]*\)s'`
|
|
slice=`expr $i : '...[0-9]*s\([0-9]*\)'`
|
|
part=`expr $i : '...[0-9]*s[0-9]*\(.*\)'`
|
|
;;
|
|
*)
|
|
unit=`expr $i : '..\([0-9]*\)s'`
|
|
slice=`expr $i : '..[0-9]*s\([0-9]*\)'`
|
|
part=`expr $i : '..[0-9]*s[0-9]*\(.*\)'`
|
|
;;
|
|
esac
|
|
case $unit in
|
|
[0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
|
|
case $slice in
|
|
[0-9]|[1-2][0-9]|30)
|
|
oldslice=$slice
|
|
slice=$(($slice+1))
|
|
slicename=`dkitos $slice`
|
|
minor=`dkminor 0 $unit $slice $dkrawpart`
|
|
mknod $name$unit$slicename c $chr $minor root:operator
|
|
ln -f $name$unit$slicename r$name$unit$slicename
|
|
case $part in
|
|
[a-h])
|
|
case $oldslice in
|
|
0) slice=$oldslice ;;
|
|
esac
|
|
for part in 0 1 2 3 4 5 6 7
|
|
do
|
|
minor=`dkminor 0 $unit $slice $part`
|
|
partname=`dkitop $part`
|
|
mknod $name$unit$slicename$partname \
|
|
c $chr $minor root:operator
|
|
ln -f $name$unit$slicename$partname \
|
|
r$name$unit$slicename$partname
|
|
done
|
|
;;
|
|
"")
|
|
;;
|
|
*)
|
|
echo bad partition for disk in: $i
|
|
;;
|
|
esac
|
|
;;
|
|
*)
|
|
echo bad slice for disk in: $i
|
|
;;
|
|
esac
|
|
;;
|
|
*)
|
|
echo bad unit for disk in: $i "(unit=$unit, slice=$slice, part=$part)"
|
|
;;
|
|
esac
|
|
umask 77
|
|
;;
|
|
|
|
fd*)
|
|
umask $disk_umask
|
|
unit=`expr $i : '..\(.*\)'`
|
|
name=fd; chr=9
|
|
case $unit in
|
|
0|1|2|3)
|
|
mknod ${name}${unit} c $chr `expr $unit '*' 64` root:operator
|
|
ln -f ${name}${unit} r${name}${unit}
|
|
# Fake BSD partitions
|
|
for i in a b c d e f g h
|
|
do
|
|
ln -f ${name}${unit} ${name}${unit}$i
|
|
ln -f r${name}${unit} r${name}${unit}$i
|
|
done
|
|
# User-readable and programmer-readable name sets
|
|
|
|
mknod ${name}${unit}.1720 c $chr `expr $unit '*' 64 + 1` \
|
|
root:operator
|
|
ln -f ${name}${unit}.1720 r${name}${unit}.1720
|
|
# ln -f ${name}${unit}.1720 ${name}${unit}135hs21
|
|
# ln -f r${name}${unit}.1720 r${name}${unit}135hs21
|
|
|
|
mknod ${name}${unit}.1480 c $chr `expr $unit '*' 64 + 2` \
|
|
root:operator
|
|
ln -f ${name}${unit}.1480 r${name}${unit}.1480
|
|
# ln -f ${name}${unit}.1480 ${name}${unit}135hs18
|
|
# ln -f r${name}${unit}.1480 r${name}${unit}135hs18
|
|
# ln -f ${name}${unit}.1480 ${name}${unit}96hs18
|
|
# ln -f r${name}${unit}.1480 r${name}${unit}96hs18
|
|
|
|
mknod ${name}${unit}.1440 c $chr `expr $unit '*' 64 + 3` \
|
|
root:operator
|
|
ln -f ${name}${unit}.1440 r${name}${unit}.1440
|
|
# ln -f ${name}${unit}.1440 ${name}${unit}135
|
|
# ln -f r${name}${unit}.1440 r${name}${unit}135
|
|
# ln -f ${name}${unit}.1440 ${name}${unit}135ds18
|
|
# ln -f r${name}${unit}.1440 r${name}${unit}135ds18
|
|
# ln -f ${name}${unit}.1440 ${name}${unit}96ds18
|
|
# ln -f r${name}${unit}.1440 r${name}${unit}96ds18
|
|
|
|
mknod ${name}${unit}.1200 c $chr `expr $unit '*' 64 + 4` \
|
|
root:operator
|
|
ln -f ${name}${unit}.1200 r${name}${unit}.1200
|
|
# ln -f ${name}${unit}.1200 ${name}${unit}96
|
|
# ln -f r${name}${unit}.1200 r${name}${unit}96
|
|
# ln -f ${name}${unit}.1200 ${name}${unit}96ds15
|
|
# ln -f r${name}${unit}.1200 r${name}${unit}96ds15
|
|
# ln -f ${name}${unit}.1200 ${name}${unit}135ds15
|
|
# ln -f r${name}${unit}.1200 r${name}${unit}135ds15
|
|
|
|
mknod ${name}${unit}.820 c $chr `expr $unit '*' 64 + 5` \
|
|
root:operator
|
|
ln -f ${name}${unit}.820 r${name}${unit}.820
|
|
# ln -f ${name}${unit}.820 ${name}${unit}96hs10
|
|
# ln -f r${name}${unit}.820 r${name}${unit}96hs10
|
|
# ln -f ${name}${unit}.820 ${name}${unit}135hs10
|
|
# ln -f r${name}${unit}.820 r${name}${unit}135hs10
|
|
|
|
mknod ${name}${unit}.800 c $chr `expr $unit '*' 64 + 6` \
|
|
root:operator
|
|
ln -f ${name}${unit}.800 r${name}${unit}.800
|
|
# ln -f ${name}${unit}.800 ${name}${unit}96ds10
|
|
# ln -f r${name}${unit}.800 r${name}${unit}96ds10
|
|
# ln -f ${name}${unit}.800 ${name}${unit}135ds10
|
|
# ln -f r${name}${unit}.800 r${name}${unit}135ds10
|
|
|
|
mknod ${name}${unit}.720 c $chr `expr $unit '*' 64 + 7` \
|
|
root:operator
|
|
ln -f ${name}${unit}.720 r${name}${unit}.720
|
|
# ln -f ${name}${unit}.720 ${name}${unit}96ds9
|
|
# ln -f r${name}${unit}.720 r${name}${unit}96ds9
|
|
# ln -f ${name}${unit}.720 ${name}${unit}135ds9
|
|
# ln -f r${name}${unit}.720 r${name}${unit}135ds9
|
|
|
|
mknod ${name}${unit}.360 c $chr `expr $unit '*' 64 + 8` \
|
|
root:operator
|
|
ln -f ${name}${unit}.360 r${name}${unit}.360
|
|
# ln -f ${name}${unit}.360 ${name}${unit}48
|
|
# ln -f r${name}${unit}.360 r${name}${unit}48
|
|
# ln -f ${name}${unit}.360 ${name}${unit}48ds9
|
|
# ln -f r${name}${unit}.360 r${name}${unit}48ds9
|
|
|
|
mknod ${name}${unit}.640 c $chr `expr $unit '*' 64 + 9` \
|
|
root:operator
|
|
ln -f ${name}${unit}.640 r${name}${unit}.640
|
|
# ln -f ${name}${unit}.640 ${name}${unit}96ds8
|
|
# ln -f r${name}${unit}.640 r${name}${unit}96ds8
|
|
# ln -f ${name}${unit}.640 ${name}${unit}135ds8
|
|
# ln -f r${name}${unit}.640 r${name}${unit}135ds8
|
|
|
|
mknod ${name}${unit}.1232 c $chr `expr $unit '*' 64 + 10` \
|
|
root:operator
|
|
ln -f ${name}${unit}.1232 r${name}${unit}.1232
|
|
# ln -f ${name}${unit}.1232 ${name}${unit}96ds8
|
|
# ln -f r${name}${unit}.1232 r${name}${unit}96ds8
|
|
# ln -f ${name}${unit}.1232 ${name}${unit}135ds8
|
|
# ln -f r${name}${unit}.1232 r${name}${unit}135ds8
|
|
;;
|
|
*)
|
|
echo bad unit for disk in: $i
|
|
;;
|
|
esac
|
|
umask 77
|
|
;;
|
|
|
|
ad*|afd*|amrd*|da*|fla*|idad*|md*|mlxd*|twed*|vn*|wd*|wfd*)
|
|
umask $disk_umask
|
|
case $i in
|
|
ad*) name=ad; chr=116;;
|
|
afd*) name=afd; chr=118;;
|
|
amrd*) name=amrd; chr=133;;
|
|
da*) name=da; chr=13;;
|
|
fla*) name=fla; chr=102;;
|
|
idad*) name=idad; chr=109;;
|
|
md*) name=md; chr=95;;
|
|
mlxd*) name=mlxd; chr=131;;
|
|
twed*) name=twed; chr=147;;
|
|
vn*) name=vn; chr=43;;
|
|
wd*) name=wd; chr=3;;
|
|
wfd*) name=wfd; chr=87;;
|
|
esac
|
|
case $i in
|
|
amrd*|idad*|mlxd*|twed*)
|
|
unit=`expr $i : '....\(.*\)'`
|
|
;;
|
|
afd*|fla*|wfd*)
|
|
unit=`expr $i : '...\(.*\)'`
|
|
;;
|
|
*)
|
|
unit=`expr $i : '..\(.*\)'`
|
|
;;
|
|
esac
|
|
case $unit in
|
|
[0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
|
|
for slicepartname in s0h s1 s2 s3 s4
|
|
do
|
|
sh MAKEDEV $name$unit$slicepartname
|
|
done
|
|
;;
|
|
*)
|
|
echo bad unit for disk in: $i
|
|
;;
|
|
esac
|
|
umask 77
|
|
;;
|
|
|
|
ccd*)
|
|
umask $disk_umask
|
|
name=ccd
|
|
chr=74
|
|
unit=`expr $i : '...\(.*\)'`
|
|
case $unit in
|
|
[0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
|
|
for part in 0 1 2 3 4 5 6 7
|
|
do
|
|
minor=`dkminor 0 $unit 0 $part`
|
|
partname=`dkitop $part`
|
|
mknod $name$unit$partname c $chr $minor root:operator
|
|
ln -f $name$unit$partname r$name$unit$partname
|
|
done
|
|
;;
|
|
*)
|
|
echo bad unit for disk in: $i
|
|
;;
|
|
esac
|
|
umask 77
|
|
;;
|
|
|
|
# SCSI processor type driver
|
|
pt[0-9]*)
|
|
chr=61
|
|
name=pt
|
|
unit=`expr $i : 'pt\([0-9][0-9]*\)'`
|
|
if [ -z "${unit}" ]; then
|
|
unit=0
|
|
fi
|
|
unit=`expr $unit + 1 - 1`
|
|
mknod ${name}${unit} c $chr $unit
|
|
;;
|
|
|
|
# SCSI SES/SAF-TE type driver
|
|
ses[0-9]*)
|
|
chr=110
|
|
name=ses
|
|
unit=`expr $i : 'ses\([0-9][0-9]*\)'`
|
|
if [ -z "${unit}" ]; then
|
|
unit=0
|
|
fi
|
|
unit=`expr $unit + 1 - 1`
|
|
mknod ${name}${unit} c $chr $unit
|
|
;;
|
|
# SCSI target mode sample driver
|
|
targ[0-9]*)
|
|
chr=65
|
|
name=targ
|
|
unit=`expr $i : 'targ\([0-9][0-9]*\)'`
|
|
if [ -z "${unit}" ]; then
|
|
unit=0
|
|
fi
|
|
unit=`expr $unit + 1 - 1`
|
|
mknod ${name}${unit} c $chr $unit
|
|
mknod ${name}.ctl c $chr 0xffff00ff
|
|
;;
|
|
|
|
# CAM transport layer device
|
|
xpt*)
|
|
# This major number is temporary
|
|
chr=104
|
|
name=xpt
|
|
units=`expr $i : 'xpt\(.*\)'`
|
|
if [ -z "${units}" ]; then
|
|
units=1
|
|
fi
|
|
i=0
|
|
while [ $i -lt $units ]; do
|
|
dname=$name$i
|
|
rm -rf $dname r$dname
|
|
mknod $dname c $chr $i root:operator
|
|
i=$(($i + 1))
|
|
done
|
|
;;
|
|
|
|
# CAM passthrough device
|
|
pass*)
|
|
# This major number is temporary
|
|
chr=31
|
|
name=pass
|
|
units=`expr $i : 'pass\(.*\)'`
|
|
if [ -z "${units}" ]; then
|
|
units=1
|
|
fi
|
|
i=0
|
|
while [ $i -lt $units ]; do
|
|
dname=$name$i
|
|
rm -rf $dname r$dname
|
|
mknod $dname c $chr $i root:operator
|
|
i=$(($i + 1))
|
|
done
|
|
;;
|
|
pty*)
|
|
class=`expr $i : 'pty\(.*\)'`
|
|
case $class in
|
|
0) offset=0 name=p;;
|
|
1) offset=32 name=q;;
|
|
2) offset=64 name=r;;
|
|
3) offset=96 name=s;;
|
|
# Note that xterm (at least) only look at p-s.
|
|
4) offset=128 name=P;;
|
|
5) offset=160 name=Q;;
|
|
6) offset=192 name=R;;
|
|
7) offset=224 name=S;;
|
|
# This still leaves [tuTU].
|
|
*) echo bad unit for pty in: $i;;
|
|
esac
|
|
umask 0
|
|
case $class in
|
|
0|1|2|3|4|5|6|7)
|
|
i=0
|
|
while [ $i -lt 32 ]; do
|
|
# This was an awk substr() before.
|
|
c=$(echo 0123456789abcdefghijklmnopqrstuv |
|
|
dd bs=1 skip=$i count=1 2>/dev/null)
|
|
mknod tty$name$c c 5 $(($offset + $i))
|
|
mknod pty$name$c c 6 $(($offset + $i))
|
|
i=$(($i + 1))
|
|
done
|
|
;;
|
|
esac
|
|
umask 77
|
|
;;
|
|
|
|
sa*)
|
|
umask $tape_umask
|
|
unit=`expr $i : '..\(.*\)'`
|
|
chr=14
|
|
|
|
case $unit in
|
|
[0-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9])
|
|
mknod sa${unit}.ctl c $chr `saminor 1 ${unit} 0 0`
|
|
ln -f sa${unit}.ctl rsa${unit}.ctl
|
|
for m in 0 1 2 3
|
|
do
|
|
mknod sa${unit}.${m} c $chr \
|
|
`saminor 0 ${unit} ${m} 0` root:operator
|
|
ln -f sa${unit}.${m} rsa${unit}.${m}
|
|
mknod nsa${unit}.${m} c $chr \
|
|
`saminor 0 ${unit} ${m} 1` root:operator
|
|
ln -f nsa${unit}.${m} nrsa${unit}.${m}
|
|
mknod esa${unit}.${m} c $chr \
|
|
`saminor 0 ${unit} ${m} 2` root:operator
|
|
ln -f esa${unit}.${m} ersa${unit}.${m}
|
|
done
|
|
ln -f sa${unit}.0 sa${unit}
|
|
ln -f sa${unit}.0 rsa${unit}.0
|
|
ln -f sa${unit}.0 rsa${unit}
|
|
ln -f nsa${unit}.0 nsa${unit}
|
|
ln -f nsa${unit}.0 nrsa${unit}.0
|
|
ln -f nsa${unit}.0 nrsa${unit}
|
|
ln -f esa${unit}.0 esa${unit}
|
|
ln -f esa${unit}.0 ersa${unit}.0
|
|
ln -f esa${unit}.0 ersa${unit}
|
|
;;
|
|
*)
|
|
echo bad unit for tape in: $i
|
|
;;
|
|
esac
|
|
umask 77
|
|
;;
|
|
|
|
ch*)
|
|
umask 37
|
|
unit=`expr $i : '..\(.*\)'`
|
|
case $i in
|
|
ch*) name=ch; chr=17;;
|
|
esac
|
|
case $unit in
|
|
0|1|2|3|4|5|6)
|
|
mknod ${name}${unit} c $chr $unit root:operator
|
|
;;
|
|
*)
|
|
echo bad unit for media changer in: $i
|
|
;;
|
|
esac
|
|
umask 77
|
|
;;
|
|
|
|
ast*)
|
|
umask 2 ;
|
|
unit=`expr $i : '...\(.*\)'`
|
|
chr=119
|
|
case $unit in
|
|
0|1|2|3)
|
|
mknod rast${unit} c $chr `expr $unit '*' 8 + 0` root:operator
|
|
chmod 640 rast${unit}
|
|
mknod nrast${unit} c $chr `expr $unit '*' 8 + 1` root:operator
|
|
chmod 640 nrast${unit}
|
|
;;
|
|
*)
|
|
echo bad unit for tape in: $i
|
|
;;
|
|
esac
|
|
umask 77
|
|
;;
|
|
|
|
acd*|cd*|mcd*|scd*)
|
|
umask $disk_umask
|
|
case $i in
|
|
acd*) units=`expr $i : '...\(.*\)'`; name=acd; chr=117;;
|
|
cd*) units=`expr $i : '..\(.*\)'`; name=cd; chr=15;;
|
|
mcd*) units=`expr $i : '...\(.*\)'`; name=mcd; chr=29;;
|
|
scd*) units=`expr $i : '...\(.*\)'`; name=scd; chr=45;;
|
|
esac
|
|
if [ -z "${units}" -o "${units}" -le 0 ]; then
|
|
units=1
|
|
fi
|
|
if [ "${units}" -le 31 ]; then
|
|
i=0
|
|
while [ $i -le $units ]; do
|
|
dname=$name$i
|
|
rm -rf ${dname}* r${dname}*
|
|
mknod ${dname}a c $chr $(($i * 8)) root:operator
|
|
mknod ${dname}c c $chr $(($i * 8 + 2)) root:operator
|
|
ln -f ${dname}a r${dname}a
|
|
ln -f ${dname}c r${dname}c
|
|
i=$(($i + 1))
|
|
done
|
|
else
|
|
echo "$i is invalid -- can't have more than 32 cd devices"
|
|
fi
|
|
umask 77
|
|
;;
|
|
|
|
matcd*)
|
|
umask 2
|
|
case $i in
|
|
matcd*) unit=`expr $i : '.....\(.*\)'`; name=matcd; chr=46;;
|
|
esac
|
|
case $unit in
|
|
0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15)
|
|
mknod ${name}${unit}a c $chr `expr $unit '*' 8 + 0` \
|
|
root:operator
|
|
mknod ${name}${unit}c c $chr `expr $unit '*' 8 + 2` \
|
|
root:operator
|
|
ln -f ${name}${unit}a r${name}${unit}a
|
|
ln -f ${name}${unit}c r${name}${unit}c
|
|
chmod 640 ${name}${unit}[a-h] r${name}${unit}[a-h]
|
|
|
|
mknod ${name}${unit}la c $chr `expr $unit '*' 8 + 128` \
|
|
root:operator
|
|
mknod ${name}${unit}lc c $chr `expr $unit '*' 8 + 130` \
|
|
root:operator
|
|
ln -f ${name}${unit}la r${name}${unit}la
|
|
ln -f ${name}${unit}lc r${name}${unit}lc
|
|
chmod 640 ${name}${unit}l[a-h] r${name}${unit}l[a-h]
|
|
;;
|
|
*)
|
|
echo bad unit for disk in: $i
|
|
;;
|
|
esac
|
|
umask 77
|
|
;;
|
|
|
|
wcd*)
|
|
umask 2 ;
|
|
unit=`expr $i : '...\(.*\)'`
|
|
chr=69
|
|
case $unit in
|
|
0|1|2|3|4|5|6|7)
|
|
mknod wcd${unit}a c $chr `expr $unit '*' 8 + 0` root:operator
|
|
mknod wcd${unit}c c $chr `expr $unit '*' 8 + 2` root:operator
|
|
ln -f wcd${unit}a rwcd${unit}a
|
|
ln -f wcd${unit}c rwcd${unit}c
|
|
chmod 640 wcd${unit}[a-h] rwcd${unit}[a-h]
|
|
;;
|
|
*)
|
|
echo bad unit for disk in: $i
|
|
;;
|
|
esac
|
|
umask 77
|
|
;;
|
|
|
|
wst*)
|
|
umask 2 ;
|
|
unit=`expr $i : '...\(.*\)'`
|
|
chr=90
|
|
case $unit in
|
|
0|1|2|3)
|
|
mknod rwst${unit} c $chr `expr $unit '*' 8 + 0` root:operator
|
|
chmod 640 rwst${unit}
|
|
;;
|
|
esac
|
|
umask 77
|
|
;;
|
|
|
|
iic*)
|
|
unit=`expr $i : 'iic\(.*\)'`
|
|
mknod iic$unit c 105 $unit
|
|
;;
|
|
|
|
smb*)
|
|
unit=`expr $i : 'smb\(.*\)'`
|
|
mknod smb$unit c 106 $unit
|
|
;;
|
|
|
|
pcfclock*)
|
|
unit=`expr $i : 'pcfclock\(.*\)'`
|
|
mknod pcfclock$unit c 140 $unit
|
|
;;
|
|
|
|
ppi*)
|
|
unit=`expr $i : 'ppi\(.*\)'`
|
|
mknod ppi$unit c 82 $unit
|
|
;;
|
|
|
|
pps*)
|
|
unit=`expr $i : 'pps\(.*\)'`
|
|
mknod pps$unit c 89 $unit
|
|
;;
|
|
|
|
usb)
|
|
mknod usb$unit c 108 255 root:operator
|
|
chmod 0660 usb$unit
|
|
;;
|
|
|
|
usb*)
|
|
unit=`expr $i : 'usb\(.*\)'`
|
|
mknod usb$unit c 108 $unit root:operator
|
|
chmod 0660 usb$unit
|
|
;;
|
|
|
|
uhid*)
|
|
unit=`expr $i : 'uhid\(.*\)'`
|
|
mknod uhid$unit c 122 $unit
|
|
;;
|
|
|
|
ums*)
|
|
unit=`expr $i : 'ums\(.*\)'`
|
|
mknod ums$unit c 111 $unit
|
|
;;
|
|
|
|
ulpt*)
|
|
unit=`expr $i : 'ulpt\(.*\)'`
|
|
minor=$unit
|
|
mknod ulpt$unit c 113 $minor
|
|
minor=`expr $unit + 64`
|
|
mknod unlpt$unit c 113 $minor # and the 'no prime' version
|
|
;;
|
|
|
|
ugen*)
|
|
unit=`expr $i : 'ugen\([0-9][0-9]*\)'`
|
|
endpoint=`expr $i : 'ugen.*\.\([0-9][0-9]*\)'`
|
|
if [ -z "${unit}" ]; then
|
|
echo $i - Invalid unit number
|
|
fi
|
|
if [ -z "${endpoint}" ]; then # ugen0 & ugen0.1 - ugen0.15
|
|
mknod ugen$unit c 114 $(($unit * 16))
|
|
i=1
|
|
while [ $i -lt 16 ]; do
|
|
mknod ugen$unit.$i c 114 $(($unit * 16 + $i))
|
|
i=$(($i + 1))
|
|
done
|
|
else
|
|
minor=$(($unit * 16 + $endpoint))
|
|
mknod ugen$unit.$endpoint c 114 $minor
|
|
fi
|
|
;;
|
|
|
|
urio*)
|
|
unit=`expr $i : 'urio\(.*\)'`
|
|
mknod urio$unit c 143 $unit
|
|
;;
|
|
|
|
usio*)
|
|
unit=`expr $i : 'usio\(.*\)'`
|
|
minor=$(($minor + 128))
|
|
mknod usio$unit c 138 $minor
|
|
;;
|
|
|
|
lpt*)
|
|
unit=`expr $i : 'lpt\(.*\)'`
|
|
mknod lpt$unit c 16 $unit
|
|
mknod lpctl$unit c 16 `expr $unit + 128`
|
|
;;
|
|
|
|
tw*)
|
|
unit=`expr $i : 'tw\(.*\)'`
|
|
mknod tw$unit c 19 $unit root:operator
|
|
;;
|
|
|
|
# Use this to create virtual consoles for syscons, pcvt or codrv
|
|
# ttyv0-b
|
|
# use as MAKEDEV vtyNN to create NN entries
|
|
vty*)
|
|
chr=12
|
|
units=`expr $i : 'vty\(.*\)'`
|
|
i=0
|
|
while [ $i -lt $units ]; do
|
|
mknod ttyv$(printf %01x $i) c $chr $i
|
|
i=$(($i + 1))
|
|
done
|
|
ln -fs ttyv0 vga # XXX X still needs this pccons relic
|
|
;;
|
|
|
|
bpf*)
|
|
nbpf=`expr $i : 'bpf\(.*\)$'`
|
|
unit=0
|
|
while [ $unit -le $nbpf ]; do
|
|
mknod bpf$unit c 23 $unit
|
|
unit=$(($unit + 1))
|
|
done
|
|
;;
|
|
|
|
speaker)
|
|
mknod speaker c 26 0
|
|
;;
|
|
|
|
cuaa?|cua?)
|
|
umask 7
|
|
unit=`expr $i : 'cua.*\(.\)$'`
|
|
m=`ttyminor $unit`
|
|
mknod cuaa$unit c 28 `expr $m + 128` uucp:dialer
|
|
mknod cuaia$unit c 28 `expr $m + 32 + 128` uucp:dialer
|
|
mknod cuala$unit c 28 `expr $m + 64 + 128` uucp:dialer
|
|
umask 77
|
|
;;
|
|
|
|
tty0?|ttyd?|tty?)
|
|
unit=`expr $i : 'tty.*\(.\)$'`
|
|
m=`ttyminor $unit`
|
|
mknod ttyd$unit c 28 $m
|
|
mknod ttyid$unit c 28 `expr $m + 32`
|
|
mknod ttyld$unit c 28 `expr $m + 64`
|
|
;;
|
|
|
|
cuac?)
|
|
umask 7
|
|
portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
|
|
g h i j k l m n o p q r s t u v"
|
|
major=48
|
|
card=`expr $i : 'cua.*\(.\)$'`
|
|
for unit in $portlist
|
|
do
|
|
minor=`ttyminor $unit`
|
|
minor=`expr $card \* 65536 + $minor`
|
|
name=$card$unit
|
|
mknod cuac$name c $major `expr $minor + 128` uucp:dialer
|
|
mknod cuaic$name c $major `expr $minor + 32 + 128` uucp:dialer
|
|
mknod cualc$name c $major `expr $minor + 64 + 128` uucp:dialer
|
|
done
|
|
umask 77
|
|
;;
|
|
|
|
ttyc?)
|
|
portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
|
|
g h i j k l m n o p q r s t u v"
|
|
major=48
|
|
card=`expr $i : 'tty.*\(.\)$'`
|
|
for unit in $portlist
|
|
do
|
|
minor=`ttyminor $unit`
|
|
minor=`expr $card \* 65536 + $minor`
|
|
name=$card$unit
|
|
mknod ttyc$name c $major $minor
|
|
mknod ttyic$name c $major `expr $minor + 32`
|
|
mknod ttylc$name c $major `expr $minor + 64`
|
|
done
|
|
;;
|
|
|
|
# RISCom8 'rc' driver entries
|
|
|
|
cuam?)
|
|
umask 7
|
|
unit=`expr $i : 'cua.*\(.\)$'`
|
|
m=`ttyminor $unit`
|
|
mknod cuam$unit c 63 `expr $m + 128` uucp:dialer
|
|
umask 77
|
|
;;
|
|
|
|
ttym?)
|
|
unit=`expr $i : 'tty.*\(.\)$'`
|
|
m=`ttyminor $unit`
|
|
mknod ttym$unit c 63 $m
|
|
;;
|
|
|
|
# Specialix SI/XIO.
|
|
# Note: these are 'base 1' to match the numbers on the panels, and to match
|
|
# the manual that comes with the system.
|
|
ttyA*)
|
|
major=68
|
|
nports=`expr $i : 'ttyA\(.*\)$'`
|
|
port=1
|
|
while [ $port -le $nports ]; do
|
|
minor=$(expr $port - 1)
|
|
name=$(printf %02d $port)
|
|
mknod ttyA$name c $major $minor
|
|
mknod ttyiA$name c $major `expr $minor + 65536`
|
|
mknod ttylA$name c $major `expr $minor + 131072`
|
|
port=$(($port + 1))
|
|
done
|
|
# For the user-mode control program, 'sicontrol'
|
|
mknod si_control c 68 262144
|
|
;;
|
|
|
|
cuaA*)
|
|
umask 7
|
|
major=68
|
|
nports=`expr $i : 'cuaA\(.*\)$'`
|
|
port=1
|
|
while [ $port -le $nports ]; do
|
|
minor=$(expr $port - 1)
|
|
name=$(printf %02d $port)
|
|
mknod cuaA$name c $major `expr $minor + 128` uucp:dialer
|
|
mknod cuaiA$name c $major `expr $minor + 128 + 65536` \
|
|
uucp:dialer
|
|
mknod cualA$name c $major `expr $minor + 128 + 131072` \
|
|
uucp:dialer
|
|
port=$(($port + 1))
|
|
done
|
|
umask 77
|
|
;;
|
|
|
|
# Digiboard PC/?? 16 port card.
|
|
# The current scheme of minor numbering is:
|
|
#
|
|
# unused{14} CARD{2} major{8} CALLOUT{1} LOCK{1} INIT{1} PORT{5}
|
|
#
|
|
# CARD bitfield in future versions may be extended to 3 bits.
|
|
#
|
|
# See dgb(4)
|
|
#
|
|
ttyD?)
|
|
portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
|
|
major=58
|
|
card=`expr $i : 'tty.*\(.\)$'`
|
|
for unit in $portlist
|
|
do
|
|
minor=`ttyminor $unit`
|
|
minor=`expr $card \* 65536 + $minor`
|
|
name=$card$unit
|
|
mknod ttyD$name c $major $minor
|
|
mknod ttyiD$name c $major `expr $minor + 32`
|
|
mknod ttylD$name c $major `expr $minor + 64`
|
|
done
|
|
;;
|
|
|
|
cuaD?)
|
|
umask 7
|
|
portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
|
|
major=58
|
|
card=`expr $i : 'cua.*\(.\)$'`
|
|
for unit in $portlist
|
|
do
|
|
minor=`ttyminor $unit`
|
|
minor=`expr $card \* 65536 + $minor`
|
|
name=$card$unit
|
|
mknod cuaD$name c $major `expr $minor + 128` uucp:dialer
|
|
mknod cuaiD$name c $major `expr $minor + 32 + 128` uucp:dialer
|
|
mknod cualD$name c $major `expr $minor + 64 + 128` uucp:dialer
|
|
done
|
|
umask 77
|
|
;;
|
|
|
|
ttyM*)
|
|
portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
|
|
modulelist="a b c d"
|
|
major=101
|
|
card=`expr $i : 'tty.*\(.\)$'`
|
|
for unit in $modulelist
|
|
do
|
|
moduleminor=`ttyminor $unit`
|
|
moduleminor=`expr $moduleminor % 10 \* 16`
|
|
modulename=$unit
|
|
|
|
for unit in $portlist
|
|
do
|
|
minor=`ttyminor $unit`
|
|
minor=`expr $card \* 65536 + $minor + $moduleminor`
|
|
name=$card$modulename$unit
|
|
rm -f tty*M$name
|
|
mknod ttyM$name c $major $minor
|
|
mknod ttyiM$name c $major `expr $minor + 64`
|
|
mknod ttylM$name c $major `expr $minor + 128`
|
|
done
|
|
done
|
|
;;
|
|
|
|
cuaM?)
|
|
umask 7
|
|
portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
|
|
modulelist="a b c d"
|
|
major=101
|
|
card=`expr $i : 'cua.*\(.\)$'`
|
|
for unit in $modulelist
|
|
do
|
|
moduleminor=`ttyminor $unit`
|
|
moduleminor=`expr $moduleminor % 10 \* 16`
|
|
modulename=$unit
|
|
|
|
for unit in $portlist
|
|
do
|
|
minor=`ttyminor $unit`
|
|
minor=`expr $card \* 65536 + $minor + $moduleminor`
|
|
name=$card$modulename$unit
|
|
rm -f cua*M$name
|
|
mknod cuaM$name c $major `expr $minor + 262144` \
|
|
uucp:dialer
|
|
mknod cuaiM$name c $major `expr $minor + 64 + 262144` \
|
|
uucp:dialer
|
|
mknod cualM$name c $major `expr $minor + 128 + 262144` \
|
|
uucp:dialer
|
|
done
|
|
done
|
|
umask 77
|
|
;;
|
|
|
|
ttyR?)
|
|
major=81
|
|
BOARD=1; Rnum=0
|
|
MINOR=$(($BOARD * 65536))
|
|
controllers=$(
|
|
dmesg | while read first rest; do
|
|
case "$first" in
|
|
RocketPort[0-4])
|
|
echo "$first"
|
|
;;
|
|
esac
|
|
done
|
|
)
|
|
rm -f /dev/ttyR* /dev/ttyiR* /dev/ttylR*
|
|
for i in $controllers; do
|
|
ndevices=$(
|
|
dmesg | while read first bar ports rest; do
|
|
case "$first" in
|
|
$i*)
|
|
echo "$ports"
|
|
;;
|
|
esac
|
|
done
|
|
)
|
|
echo -n "Creating $ndevices devices for $i: "
|
|
dev=0
|
|
while [ $dev -lt $ndevices ]; do
|
|
mknod /dev/ttyR$Rnum c $major $MINOR
|
|
mknod /dev/ttyiR$Rnum c $major $(($MINOR + 32))
|
|
mknod /dev/ttylR$Rnum c $major $(($MINOR + 64))
|
|
Rnum=$(($Rnum + 1))
|
|
MINOR=$(($MINOR + 1))
|
|
dev=$(($dev + 1))
|
|
done
|
|
BOARD=$(($BOARD + 1))
|
|
MINOR=$(($BOARD * 65536))
|
|
echo " "
|
|
done
|
|
;;
|
|
|
|
cuaR?)
|
|
major=81
|
|
BOARD=1; Rnum=0
|
|
MINOR=$(($BOARD * 65536))
|
|
controllers=$(
|
|
dmesg | while read first rest; do
|
|
case "$first" in
|
|
RocketPort[0-4])
|
|
echo "$first"
|
|
;;
|
|
esac
|
|
done
|
|
)
|
|
rm -f /dev/cuaR* /dev/cuaiR* /dev/cualR*
|
|
for i in $controllers; do
|
|
ndevices=$(
|
|
dmesg | while read first bar ports rest; do
|
|
case "$first" in
|
|
$i*)
|
|
echo "$ports"
|
|
;;
|
|
esac
|
|
done
|
|
)
|
|
echo -n "Creating $ndevices devices for $i: "
|
|
dev=0
|
|
while [ $dev -lt $ndevices ]; do
|
|
mknod /dev/cuaR$Rnum c $major $(($MINOR + 128)) uucp:dialer
|
|
mknod /dev/cuaiR$Rnum c $major $(($MINOR + 128 + 32)) \
|
|
uucp:dialer
|
|
mknod /dev/cualR$Rnum c $major $(($MINOR + 128 + 64)) \
|
|
uucp:dialer
|
|
Rnum=$(($Rnum + 1))
|
|
MINOR=$(($MINOR + 1))
|
|
dev=$(($dev + 1))
|
|
done
|
|
BOARD=$(($BOARD + 1))
|
|
MINOR=$(($BOARD * 65536))
|
|
echo " "
|
|
done
|
|
;;
|
|
|
|
mse*)
|
|
unit=`expr $i : 'mse\(.*\)'`
|
|
chr=27
|
|
mknod mse$unit c $chr `expr $unit '*' 2 + 1` # non-blocking for X11
|
|
;;
|
|
|
|
psm*)
|
|
unit=`expr $i : 'psm\(.*\)'`
|
|
chr=21
|
|
mknod psm$unit c $chr `expr $unit '*' 2 + 1` # non-blocking for X11
|
|
;;
|
|
|
|
mouse*)
|
|
name=`expr $i : 'mouse\(.*\)'`
|
|
if [ ! -c $name ]; then
|
|
$0 $name # make the appropriate device
|
|
fi
|
|
ln -fs $name mouse
|
|
;;
|
|
|
|
pcaudio)
|
|
mknod pcaudio c 24 0
|
|
mknod pcaudioctl c 24 128
|
|
;;
|
|
|
|
socksys)
|
|
mknod socksys c 41 0
|
|
mknod spx c 41 1
|
|
ln -fs socksys nfsd
|
|
chmod 666 socksys nfsd spx
|
|
;;
|
|
|
|
snd*)
|
|
#
|
|
# changes from Linux voxware
|
|
# minor Linux FreeBSD
|
|
# 8 sequencer2 (aka music0) music0
|
|
# 17 patmgr0 sequencer1
|
|
# 33 patmgr1 sequencer2
|
|
#
|
|
|
|
unit=`expr $i : 'snd\(.*\)'`
|
|
chr=30
|
|
|
|
# XXX write this less verbosely, like std
|
|
snd_security_hole=0 # XXX
|
|
umask $snd_security_hole
|
|
|
|
ln -fs mixer$unit mixer
|
|
ln -fs sequencer$unit sequencer
|
|
ln -fs dsp$unit dsp
|
|
ln -fs audio$unit audio
|
|
ln -fs dspW$unit dspW
|
|
ln -fs music$unit music
|
|
ln -fs pss$unit pss
|
|
|
|
mknod mixer$unit c $chr `expr $unit '*' 16 + 0`
|
|
mknod sequencer$unit c $chr `expr $unit '*' 16 + 1`
|
|
mknod midi$unit c $chr `expr $unit '*' 16 + 2`
|
|
mknod dsp$unit c $chr `expr $unit '*' 16 + 3`
|
|
mknod audio$unit c $chr `expr $unit '*' 16 + 4`
|
|
mknod dspW$unit c $chr `expr $unit '*' 16 + 5`
|
|
mknod sndstat c $chr 6
|
|
# minor number 7 is unused
|
|
mknod music$unit c $chr `expr $unit '*' 16 + 8`
|
|
mknod pss$unit c $chr `expr $unit '*' 16 + 9`
|
|
# minor number 10 is unused
|
|
mknod midistat c $chr 11
|
|
# minor numbers 12-15 are unused
|
|
umask 77
|
|
;;
|
|
|
|
vat)
|
|
mknod vatio c 25 128
|
|
chmod 660 vatio
|
|
;;
|
|
|
|
gsc*)
|
|
unit=`expr $i : 'gsc\(.*\)'`
|
|
mknod gsc${unit} c 47 $unit
|
|
mknod gsc${unit}p c 47 $(($unit + 8))
|
|
mknod gsc${unit}d c 47 $(($unit + 32))
|
|
mknod gsc${unit}pd c 47 $(($unit + 40))
|
|
chmod 666 gsc${unit}*
|
|
;;
|
|
|
|
apm)
|
|
mknod apm c 39 0 root:operator
|
|
chmod 660 apm
|
|
;;
|
|
|
|
apmctl)
|
|
mknod apmctl c 39 8 root:operator
|
|
chmod 660 apmctl
|
|
;;
|
|
|
|
card*)
|
|
unit=`expr $i : 'card\(.*\)'`
|
|
chr=50
|
|
mknod card$unit c $chr $unit
|
|
chmod 644 card$unit
|
|
;;
|
|
|
|
ttyx?|ttyy?|ttyz?)
|
|
case $i in
|
|
*0) unit=0;; *1) unit=1;; *2) unit=2;; *3) unit=3;;
|
|
*4) unit=4;; *5) unit=5;; *6) unit=6;; *7) unit=7;;
|
|
*8) unit=8;; *9) unit=9;; *a) unit=10;; *b) unit=11;;
|
|
*c) unit=12;; *d) unit=13;; *e) unit=14;; *f) unit=15;;
|
|
esac
|
|
case $i in
|
|
ttyy?) unit=`expr $unit \+ 16`;;
|
|
ttyz?) unit=`expr $unit \+ 32`;;
|
|
esac
|
|
mknod $i c 42 $unit
|
|
;;
|
|
|
|
cronyx)
|
|
mknod cronyx c 42 63
|
|
;;
|
|
|
|
joy)
|
|
mknod joy0 c 51 0 root:operator
|
|
mknod joy1 c 51 1 root:operator
|
|
chmod 640 joy0 joy1
|
|
;;
|
|
|
|
spigot)
|
|
mknod spigot c 11 0
|
|
chmod 444 spigot
|
|
;;
|
|
|
|
ctx?)
|
|
unit=`expr $i : 'ctx\(.*\)'`
|
|
mknod ctx$unit c 40 $unit
|
|
chmod 444 ctx$unit
|
|
;;
|
|
|
|
meteor?)
|
|
unit=`expr $i : 'meteor\(.*\)'`
|
|
mknod meteor$unit c 67 $unit
|
|
chmod 444 meteor$unit
|
|
;;
|
|
|
|
bktr?)
|
|
unit=`expr $i : 'bktr\(.*\)'`
|
|
mknod bktr$unit c 92 $unit
|
|
mknod tuner$unit c 92 $((16 + $unit ))
|
|
mknod vbi$unit c 92 $((32 + $unit ))
|
|
chmod 444 bktr$unit tuner$unit vbi$unit
|
|
;;
|
|
|
|
tun*)
|
|
ntun=`expr $i : 'tun\(.*\)$'`
|
|
unit=0
|
|
while [ $unit -le $ntun ]; do
|
|
mknod tun$unit c 52 $unit uucp:dialer
|
|
unit=$(($unit + 1))
|
|
done
|
|
;;
|
|
|
|
sysmouse)
|
|
mknod sysmouse c 12 128
|
|
mknod consolectl c 12 255
|
|
;;
|
|
|
|
snp?)
|
|
unit=`expr $i : 'snp\(.*\)'`
|
|
mknod snp$unit c 53 $unit
|
|
;;
|
|
|
|
# dufault@hda.com: If I do much more work on other A-D boards
|
|
# then eventually we'll have a "ad" and "dio" interface and some of these
|
|
# "labpcaio" ones will be gone.
|
|
# labpcaio: D-A and A-D.
|
|
# labpcdio: Digital in and Digital out.
|
|
#
|
|
labpc*)
|
|
umask 7
|
|
case $i in
|
|
labpcaio*)
|
|
name=labpcaio
|
|
unit=`expr $i : 'labpcaio\(.*\)'`
|
|
all="0 1 2 3 4 5 6 7"
|
|
offset=0
|
|
;;
|
|
labpcdio*)
|
|
name=labpcdio
|
|
unit=`expr $i : 'labpcdio\(.*\)'`
|
|
all="0 1 2 3"
|
|
offset=8
|
|
;;
|
|
*)
|
|
die 3 "Don't know LabPC type $i"
|
|
;;
|
|
esac
|
|
if [ -z "${unit}" ]; then
|
|
unit=all
|
|
fi
|
|
case $unit in
|
|
0|1|2|3|4|5|6|7)
|
|
mknod $name$unit c 66 `expr $offset + $unit `
|
|
;;
|
|
all)
|
|
for i in $all
|
|
do
|
|
mknod $name$i c 66 `expr $offset + $i `
|
|
done
|
|
;;
|
|
*)
|
|
echo "No such LabPC unit: $unit"
|
|
;;
|
|
esac
|
|
umask 77
|
|
;;
|
|
|
|
perfmon)
|
|
mknod perfmon c 2 32 root:kmem
|
|
chmod 640 perfmon
|
|
;;
|
|
|
|
ipl)
|
|
mknod ipl c 79 0
|
|
mknod ipnat c 79 1
|
|
mknod ipstate c 79 2
|
|
mknod ipauth c 79 3
|
|
;;
|
|
|
|
kbd*)
|
|
unit=`expr $i : 'kbd\(.*\)'`
|
|
chr=112
|
|
mknod kbd$unit c $chr $unit
|
|
;;
|
|
|
|
i4b)
|
|
mknod i4b c 60 0
|
|
;;
|
|
|
|
i4bctl)
|
|
mknod i4bctl c 55 0
|
|
;;
|
|
|
|
i4brbch*)
|
|
unit=`expr $i : 'i4brbch\(.*\)'`
|
|
mknod i4brbch$unit c 57 $unit
|
|
;;
|
|
|
|
i4bteld*)
|
|
offset=64
|
|
unit=`expr $i : 'i4bteld\(.*\)'`
|
|
mknod i4bteld$unit c 56 `expr $offset + $unit `
|
|
;;
|
|
|
|
i4btel*)
|
|
unit=`expr $i : 'i4btel\(.*\)'`
|
|
mknod i4btel$unit c 56 $unit
|
|
;;
|
|
|
|
i4btrc*)
|
|
unit=`expr $i : 'i4btrc\(.*\)'`
|
|
mknod i4btrc$unit c 59 $unit
|
|
;;
|
|
|
|
mlx*)
|
|
unit=`expr $i : 'mlx\(.*\)'`
|
|
mknod mlx$unit c 130 $unit
|
|
;;
|
|
|
|
3dfx*)
|
|
unit=`expr $i : '3dfx\(.*\)'`
|
|
mknod 3dfx$unit c 107 $unit
|
|
ln -sf 3dfx$unit 3dfx
|
|
;;
|
|
|
|
twe*)
|
|
unit=`expr $i : 'twe\(.*\)'`
|
|
mknod twe$unit c 146 $unit
|
|
;;
|
|
|
|
local)
|
|
umask 0 # XXX should be elsewhere
|
|
sh MAKEDEV.local
|
|
umask 77
|
|
;;
|
|
|
|
*)
|
|
echo $i - no such device name
|
|
;;
|
|
|
|
esac
|
|
done
|