cdeb7b18af
- Provide a mechanism to prevent the use of MMIO. - Prevent the use of MMIO for all 3c575 cardbus cards.
3346 lines
85 KiB
C
3346 lines
85 KiB
C
/*
|
|
* Copyright (c) 1997, 1998, 1999
|
|
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Bill Paul.
|
|
* 4. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* 3Com 3c90x Etherlink XL PCI NIC driver
|
|
*
|
|
* Supports the 3Com "boomerang", "cyclone" and "hurricane" PCI
|
|
* bus-master chips (3c90x cards and embedded controllers) including
|
|
* the following:
|
|
*
|
|
* 3Com 3c900-TPO 10Mbps/RJ-45
|
|
* 3Com 3c900-COMBO 10Mbps/RJ-45,AUI,BNC
|
|
* 3Com 3c905-TX 10/100Mbps/RJ-45
|
|
* 3Com 3c905-T4 10/100Mbps/RJ-45
|
|
* 3Com 3c900B-TPO 10Mbps/RJ-45
|
|
* 3Com 3c900B-COMBO 10Mbps/RJ-45,AUI,BNC
|
|
* 3Com 3c900B-TPC 10Mbps/RJ-45,BNC
|
|
* 3Com 3c900B-FL 10Mbps/Fiber-optic
|
|
* 3Com 3c905B-COMBO 10/100Mbps/RJ-45,AUI,BNC
|
|
* 3Com 3c905B-TX 10/100Mbps/RJ-45
|
|
* 3Com 3c905B-FL/FX 10/100Mbps/Fiber-optic
|
|
* 3Com 3c905C-TX 10/100Mbps/RJ-45 (Tornado ASIC)
|
|
* 3Com 3c980-TX 10/100Mbps server adapter (Hurricane ASIC)
|
|
* 3Com 3c980C-TX 10/100Mbps server adapter (Tornado ASIC)
|
|
* 3Com 3cSOHO100-TX 10/100Mbps/RJ-45 (Hurricane ASIC)
|
|
* 3Com 3c450-TX 10/100Mbps/RJ-45 (Tornado ASIC)
|
|
* 3Com 3c555 10/100Mbps/RJ-45 (MiniPCI, Laptop Hurricane)
|
|
* 3Com 3c556 10/100Mbps/RJ-45 (MiniPCI, Hurricane ASIC)
|
|
* 3Com 3c556B 10/100Mbps/RJ-45 (MiniPCI, Hurricane ASIC)
|
|
* 3Com 3c575TX 10/100Mbps/RJ-45 (Cardbus, Hurricane ASIC)
|
|
* 3Com 3c575B 10/100Mbps/RJ-45 (Cardbus, Hurricane ASIC)
|
|
* 3Com 3c575C 10/100Mbps/RJ-45 (Cardbus, Hurricane ASIC)
|
|
* 3Com 3cxfem656 10/100Mbps/RJ-45 (Cardbus, Hurricane ASIC)
|
|
* 3Com 3cxfem656b 10/100Mbps/RJ-45 (Cardbus, Hurricane ASIC)
|
|
* 3Com 3cxfem656c 10/100Mbps/RJ-45 (Cardbus, Tornado ASIC)
|
|
* Dell Optiplex GX1 on-board 3c918 10/100Mbps/RJ-45
|
|
* Dell on-board 3c920 10/100Mbps/RJ-45
|
|
* Dell Precision on-board 3c905B 10/100Mbps/RJ-45
|
|
* Dell Latitude laptop docking station embedded 3c905-TX
|
|
*
|
|
* Written by Bill Paul <wpaul@ctr.columbia.edu>
|
|
* Electrical Engineering Department
|
|
* Columbia University, New York City
|
|
*/
|
|
|
|
/*
|
|
* The 3c90x series chips use a bus-master DMA interface for transfering
|
|
* packets to and from the controller chip. Some of the "vortex" cards
|
|
* (3c59x) also supported a bus master mode, however for those chips
|
|
* you could only DMA packets to/from a contiguous memory buffer. For
|
|
* transmission this would mean copying the contents of the queued mbuf
|
|
* chain into an mbuf cluster and then DMAing the cluster. This extra
|
|
* copy would sort of defeat the purpose of the bus master support for
|
|
* any packet that doesn't fit into a single mbuf.
|
|
*
|
|
* By contrast, the 3c90x cards support a fragment-based bus master
|
|
* mode where mbuf chains can be encapsulated using TX descriptors.
|
|
* This is similar to other PCI chips such as the Texas Instruments
|
|
* ThunderLAN and the Intel 82557/82558.
|
|
*
|
|
* The "vortex" driver (if_vx.c) happens to work for the "boomerang"
|
|
* bus master chips because they maintain the old PIO interface for
|
|
* backwards compatibility, but starting with the 3c905B and the
|
|
* "cyclone" chips, the compatibility interface has been dropped.
|
|
* Since using bus master DMA is a big win, we use this driver to
|
|
* support the PCI "boomerang" chips even though they work with the
|
|
* "vortex" driver in order to obtain better performance.
|
|
*
|
|
* This driver is in the /sys/pci directory because it only supports
|
|
* PCI-based NICs.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/socket.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/ethernet.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
|
|
#include <net/bpf.h>
|
|
|
|
#include <machine/bus_memio.h>
|
|
#include <machine/bus_pio.h>
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/rman.h>
|
|
|
|
#include <dev/mii/mii.h>
|
|
#include <dev/mii/miivar.h>
|
|
|
|
#include <dev/pci/pcireg.h>
|
|
#include <dev/pci/pcivar.h>
|
|
|
|
MODULE_DEPEND(xl, pci, 1, 1, 1);
|
|
MODULE_DEPEND(xl, ether, 1, 1, 1);
|
|
MODULE_DEPEND(xl, miibus, 1, 1, 1);
|
|
|
|
/* "controller miibus0" required. See GENERIC if you get errors here. */
|
|
#include "miibus_if.h"
|
|
|
|
#include <pci/if_xlreg.h>
|
|
|
|
#define XL905B_CSUM_FEATURES (CSUM_IP | CSUM_TCP | CSUM_UDP)
|
|
|
|
/*
|
|
* Various supported device vendors/types and their names.
|
|
*/
|
|
static struct xl_type xl_devs[] = {
|
|
{ TC_VENDORID, TC_DEVICEID_BOOMERANG_10BT,
|
|
"3Com 3c900-TPO Etherlink XL" },
|
|
{ TC_VENDORID, TC_DEVICEID_BOOMERANG_10BT_COMBO,
|
|
"3Com 3c900-COMBO Etherlink XL" },
|
|
{ TC_VENDORID, TC_DEVICEID_BOOMERANG_10_100BT,
|
|
"3Com 3c905-TX Fast Etherlink XL" },
|
|
{ TC_VENDORID, TC_DEVICEID_BOOMERANG_100BT4,
|
|
"3Com 3c905-T4 Fast Etherlink XL" },
|
|
{ TC_VENDORID, TC_DEVICEID_KRAKATOA_10BT,
|
|
"3Com 3c900B-TPO Etherlink XL" },
|
|
{ TC_VENDORID, TC_DEVICEID_KRAKATOA_10BT_COMBO,
|
|
"3Com 3c900B-COMBO Etherlink XL" },
|
|
{ TC_VENDORID, TC_DEVICEID_KRAKATOA_10BT_TPC,
|
|
"3Com 3c900B-TPC Etherlink XL" },
|
|
{ TC_VENDORID, TC_DEVICEID_CYCLONE_10FL,
|
|
"3Com 3c900B-FL Etherlink XL" },
|
|
{ TC_VENDORID, TC_DEVICEID_HURRICANE_10_100BT,
|
|
"3Com 3c905B-TX Fast Etherlink XL" },
|
|
{ TC_VENDORID, TC_DEVICEID_CYCLONE_10_100BT4,
|
|
"3Com 3c905B-T4 Fast Etherlink XL" },
|
|
{ TC_VENDORID, TC_DEVICEID_CYCLONE_10_100FX,
|
|
"3Com 3c905B-FX/SC Fast Etherlink XL" },
|
|
{ TC_VENDORID, TC_DEVICEID_CYCLONE_10_100_COMBO,
|
|
"3Com 3c905B-COMBO Fast Etherlink XL" },
|
|
{ TC_VENDORID, TC_DEVICEID_TORNADO_10_100BT,
|
|
"3Com 3c905C-TX Fast Etherlink XL" },
|
|
{ TC_VENDORID, TC_DEVICEID_TORNADO_10_100BT_920B,
|
|
"3Com 3c920B-EMB Integrated Fast Etherlink XL" },
|
|
{ TC_VENDORID, TC_DEVICEID_HURRICANE_10_100BT_SERV,
|
|
"3Com 3c980 Fast Etherlink XL" },
|
|
{ TC_VENDORID, TC_DEVICEID_TORNADO_10_100BT_SERV,
|
|
"3Com 3c980C Fast Etherlink XL" },
|
|
{ TC_VENDORID, TC_DEVICEID_HURRICANE_SOHO100TX,
|
|
"3Com 3cSOHO100-TX OfficeConnect" },
|
|
{ TC_VENDORID, TC_DEVICEID_TORNADO_HOMECONNECT,
|
|
"3Com 3c450-TX HomeConnect" },
|
|
{ TC_VENDORID, TC_DEVICEID_HURRICANE_555,
|
|
"3Com 3c555 Fast Etherlink XL" },
|
|
{ TC_VENDORID, TC_DEVICEID_HURRICANE_556,
|
|
"3Com 3c556 Fast Etherlink XL" },
|
|
{ TC_VENDORID, TC_DEVICEID_HURRICANE_556B,
|
|
"3Com 3c556B Fast Etherlink XL" },
|
|
{ TC_VENDORID, TC_DEVICEID_HURRICANE_575A,
|
|
"3Com 3c575TX Fast Etherlink XL" },
|
|
{ TC_VENDORID, TC_DEVICEID_HURRICANE_575B,
|
|
"3Com 3c575B Fast Etherlink XL" },
|
|
{ TC_VENDORID, TC_DEVICEID_HURRICANE_575C,
|
|
"3Com 3c575C Fast Etherlink XL" },
|
|
{ TC_VENDORID, TC_DEVICEID_HURRICANE_656,
|
|
"3Com 3c656 Fast Etherlink XL" },
|
|
{ TC_VENDORID, TC_DEVICEID_HURRICANE_656B,
|
|
"3Com 3c656B Fast Etherlink XL" },
|
|
{ TC_VENDORID, TC_DEVICEID_TORNADO_656C,
|
|
"3Com 3c656C Fast Etherlink XL" },
|
|
{ 0, 0, NULL }
|
|
};
|
|
|
|
static int xl_probe (device_t);
|
|
static int xl_attach (device_t);
|
|
static int xl_detach (device_t);
|
|
|
|
static int xl_newbuf (struct xl_softc *, struct xl_chain_onefrag *);
|
|
static void xl_stats_update (void *);
|
|
static int xl_encap (struct xl_softc *, struct xl_chain *,
|
|
struct mbuf *);
|
|
static void xl_rxeof (struct xl_softc *);
|
|
static int xl_rx_resync (struct xl_softc *);
|
|
static void xl_txeof (struct xl_softc *);
|
|
static void xl_txeof_90xB (struct xl_softc *);
|
|
static void xl_txeoc (struct xl_softc *);
|
|
static void xl_intr (void *);
|
|
static void xl_start (struct ifnet *);
|
|
static void xl_start_90xB (struct ifnet *);
|
|
static int xl_ioctl (struct ifnet *, u_long, caddr_t);
|
|
static void xl_init (void *);
|
|
static void xl_stop (struct xl_softc *);
|
|
static void xl_watchdog (struct ifnet *);
|
|
static void xl_shutdown (device_t);
|
|
static int xl_suspend (device_t);
|
|
static int xl_resume (device_t);
|
|
|
|
static int xl_ifmedia_upd (struct ifnet *);
|
|
static void xl_ifmedia_sts (struct ifnet *, struct ifmediareq *);
|
|
|
|
static int xl_eeprom_wait (struct xl_softc *);
|
|
static int xl_read_eeprom (struct xl_softc *, caddr_t, int, int, int);
|
|
static void xl_mii_sync (struct xl_softc *);
|
|
static void xl_mii_send (struct xl_softc *, u_int32_t, int);
|
|
static int xl_mii_readreg (struct xl_softc *, struct xl_mii_frame *);
|
|
static int xl_mii_writereg (struct xl_softc *, struct xl_mii_frame *);
|
|
|
|
static void xl_setcfg (struct xl_softc *);
|
|
static void xl_setmode (struct xl_softc *, int);
|
|
static u_int8_t xl_calchash (caddr_t);
|
|
static void xl_setmulti (struct xl_softc *);
|
|
static void xl_setmulti_hash (struct xl_softc *);
|
|
static void xl_reset (struct xl_softc *);
|
|
static int xl_list_rx_init (struct xl_softc *);
|
|
static int xl_list_tx_init (struct xl_softc *);
|
|
static int xl_list_tx_init_90xB (struct xl_softc *);
|
|
static void xl_wait (struct xl_softc *);
|
|
static void xl_mediacheck (struct xl_softc *);
|
|
static void xl_choose_xcvr (struct xl_softc *, int);
|
|
static void xl_dma_map_addr (void *, bus_dma_segment_t *, int, int);
|
|
static void xl_dma_map_rxbuf (void *, bus_dma_segment_t *, int, bus_size_t,
|
|
int);
|
|
static void xl_dma_map_txbuf (void *, bus_dma_segment_t *, int, bus_size_t,
|
|
int);
|
|
#ifdef notdef
|
|
static void xl_testpacket (struct xl_softc *);
|
|
#endif
|
|
|
|
static int xl_miibus_readreg (device_t, int, int);
|
|
static int xl_miibus_writereg (device_t, int, int, int);
|
|
static void xl_miibus_statchg (device_t);
|
|
static void xl_miibus_mediainit (device_t);
|
|
|
|
static device_method_t xl_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, xl_probe),
|
|
DEVMETHOD(device_attach, xl_attach),
|
|
DEVMETHOD(device_detach, xl_detach),
|
|
DEVMETHOD(device_shutdown, xl_shutdown),
|
|
DEVMETHOD(device_suspend, xl_suspend),
|
|
DEVMETHOD(device_resume, xl_resume),
|
|
|
|
/* bus interface */
|
|
DEVMETHOD(bus_print_child, bus_generic_print_child),
|
|
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
|
|
|
|
/* MII interface */
|
|
DEVMETHOD(miibus_readreg, xl_miibus_readreg),
|
|
DEVMETHOD(miibus_writereg, xl_miibus_writereg),
|
|
DEVMETHOD(miibus_statchg, xl_miibus_statchg),
|
|
DEVMETHOD(miibus_mediainit, xl_miibus_mediainit),
|
|
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t xl_driver = {
|
|
"xl",
|
|
xl_methods,
|
|
sizeof(struct xl_softc)
|
|
};
|
|
|
|
static devclass_t xl_devclass;
|
|
|
|
DRIVER_MODULE(xl, cardbus, xl_driver, xl_devclass, 0, 0);
|
|
DRIVER_MODULE(xl, pci, xl_driver, xl_devclass, 0, 0);
|
|
DRIVER_MODULE(miibus, xl, miibus_driver, miibus_devclass, 0, 0);
|
|
|
|
static void
|
|
xl_dma_map_addr(arg, segs, nseg, error)
|
|
void *arg;
|
|
bus_dma_segment_t *segs;
|
|
int nseg, error;
|
|
{
|
|
u_int32_t *paddr;
|
|
|
|
paddr = arg;
|
|
*paddr = segs->ds_addr;
|
|
}
|
|
|
|
static void
|
|
xl_dma_map_rxbuf(arg, segs, nseg, mapsize, error)
|
|
void *arg;
|
|
bus_dma_segment_t *segs;
|
|
int nseg;
|
|
bus_size_t mapsize;
|
|
int error;
|
|
{
|
|
u_int32_t *paddr;
|
|
|
|
if (error)
|
|
return;
|
|
KASSERT(nseg == 1, ("xl_dma_map_rxbuf: too many DMA segments"));
|
|
paddr = arg;
|
|
*paddr = segs->ds_addr;
|
|
}
|
|
|
|
static void
|
|
xl_dma_map_txbuf(arg, segs, nseg, mapsize, error)
|
|
void *arg;
|
|
bus_dma_segment_t *segs;
|
|
int nseg;
|
|
bus_size_t mapsize;
|
|
int error;
|
|
{
|
|
struct xl_list *l;
|
|
int i, total_len;
|
|
|
|
if (error)
|
|
return;
|
|
|
|
KASSERT(nseg <= XL_MAXFRAGS, ("too many DMA segments"));
|
|
|
|
total_len = 0;
|
|
l = arg;
|
|
for (i = 0; i < nseg; i++) {
|
|
KASSERT(segs[i].ds_len <= MCLBYTES, ("segment size too large"));
|
|
l->xl_frag[i].xl_addr = htole32(segs[i].ds_addr);
|
|
l->xl_frag[i].xl_len = htole32(segs[i].ds_len);
|
|
total_len += segs[i].ds_len;
|
|
}
|
|
l->xl_frag[nseg - 1].xl_len = htole32(segs[nseg - 1].ds_len |
|
|
XL_LAST_FRAG);
|
|
l->xl_status = htole32(total_len);
|
|
l->xl_next = 0;
|
|
}
|
|
|
|
/*
|
|
* Murphy's law says that it's possible the chip can wedge and
|
|
* the 'command in progress' bit may never clear. Hence, we wait
|
|
* only a finite amount of time to avoid getting caught in an
|
|
* infinite loop. Normally this delay routine would be a macro,
|
|
* but it isn't called during normal operation so we can afford
|
|
* to make it a function.
|
|
*/
|
|
static void
|
|
xl_wait(sc)
|
|
struct xl_softc *sc;
|
|
{
|
|
register int i;
|
|
|
|
for (i = 0; i < XL_TIMEOUT; i++) {
|
|
if (!(CSR_READ_2(sc, XL_STATUS) & XL_STAT_CMDBUSY))
|
|
break;
|
|
}
|
|
|
|
if (i == XL_TIMEOUT)
|
|
printf("xl%d: command never completed!\n", sc->xl_unit);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* MII access routines are provided for adapters with external
|
|
* PHYs (3c905-TX, 3c905-T4, 3c905B-T4) and those with built-in
|
|
* autoneg logic that's faked up to look like a PHY (3c905B-TX).
|
|
* Note: if you don't perform the MDIO operations just right,
|
|
* it's possible to end up with code that works correctly with
|
|
* some chips/CPUs/processor speeds/bus speeds/etc but not
|
|
* with others.
|
|
*/
|
|
#define MII_SET(x) \
|
|
CSR_WRITE_2(sc, XL_W4_PHY_MGMT, \
|
|
CSR_READ_2(sc, XL_W4_PHY_MGMT) | (x))
|
|
|
|
#define MII_CLR(x) \
|
|
CSR_WRITE_2(sc, XL_W4_PHY_MGMT, \
|
|
CSR_READ_2(sc, XL_W4_PHY_MGMT) & ~(x))
|
|
|
|
/*
|
|
* Sync the PHYs by setting data bit and strobing the clock 32 times.
|
|
*/
|
|
static void
|
|
xl_mii_sync(sc)
|
|
struct xl_softc *sc;
|
|
{
|
|
register int i;
|
|
|
|
XL_SEL_WIN(4);
|
|
MII_SET(XL_MII_DIR|XL_MII_DATA);
|
|
|
|
for (i = 0; i < 32; i++) {
|
|
MII_SET(XL_MII_CLK);
|
|
MII_SET(XL_MII_DATA);
|
|
MII_CLR(XL_MII_CLK);
|
|
MII_SET(XL_MII_DATA);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Clock a series of bits through the MII.
|
|
*/
|
|
static void
|
|
xl_mii_send(sc, bits, cnt)
|
|
struct xl_softc *sc;
|
|
u_int32_t bits;
|
|
int cnt;
|
|
{
|
|
int i;
|
|
|
|
XL_SEL_WIN(4);
|
|
MII_CLR(XL_MII_CLK);
|
|
|
|
for (i = (0x1 << (cnt - 1)); i; i >>= 1) {
|
|
if (bits & i) {
|
|
MII_SET(XL_MII_DATA);
|
|
} else {
|
|
MII_CLR(XL_MII_DATA);
|
|
}
|
|
MII_CLR(XL_MII_CLK);
|
|
MII_SET(XL_MII_CLK);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Read an PHY register through the MII.
|
|
*/
|
|
static int
|
|
xl_mii_readreg(sc, frame)
|
|
struct xl_softc *sc;
|
|
struct xl_mii_frame *frame;
|
|
|
|
{
|
|
int i, ack;
|
|
|
|
XL_LOCK(sc);
|
|
|
|
/*
|
|
* Set up frame for RX.
|
|
*/
|
|
frame->mii_stdelim = XL_MII_STARTDELIM;
|
|
frame->mii_opcode = XL_MII_READOP;
|
|
frame->mii_turnaround = 0;
|
|
frame->mii_data = 0;
|
|
|
|
/*
|
|
* Select register window 4.
|
|
*/
|
|
|
|
XL_SEL_WIN(4);
|
|
|
|
CSR_WRITE_2(sc, XL_W4_PHY_MGMT, 0);
|
|
/*
|
|
* Turn on data xmit.
|
|
*/
|
|
MII_SET(XL_MII_DIR);
|
|
|
|
xl_mii_sync(sc);
|
|
|
|
/*
|
|
* Send command/address info.
|
|
*/
|
|
xl_mii_send(sc, frame->mii_stdelim, 2);
|
|
xl_mii_send(sc, frame->mii_opcode, 2);
|
|
xl_mii_send(sc, frame->mii_phyaddr, 5);
|
|
xl_mii_send(sc, frame->mii_regaddr, 5);
|
|
|
|
/* Idle bit */
|
|
MII_CLR((XL_MII_CLK|XL_MII_DATA));
|
|
MII_SET(XL_MII_CLK);
|
|
|
|
/* Turn off xmit. */
|
|
MII_CLR(XL_MII_DIR);
|
|
|
|
/* Check for ack */
|
|
MII_CLR(XL_MII_CLK);
|
|
ack = CSR_READ_2(sc, XL_W4_PHY_MGMT) & XL_MII_DATA;
|
|
MII_SET(XL_MII_CLK);
|
|
|
|
/*
|
|
* Now try reading data bits. If the ack failed, we still
|
|
* need to clock through 16 cycles to keep the PHY(s) in sync.
|
|
*/
|
|
if (ack) {
|
|
for(i = 0; i < 16; i++) {
|
|
MII_CLR(XL_MII_CLK);
|
|
MII_SET(XL_MII_CLK);
|
|
}
|
|
goto fail;
|
|
}
|
|
|
|
for (i = 0x8000; i; i >>= 1) {
|
|
MII_CLR(XL_MII_CLK);
|
|
if (!ack) {
|
|
if (CSR_READ_2(sc, XL_W4_PHY_MGMT) & XL_MII_DATA)
|
|
frame->mii_data |= i;
|
|
}
|
|
MII_SET(XL_MII_CLK);
|
|
}
|
|
|
|
fail:
|
|
|
|
MII_CLR(XL_MII_CLK);
|
|
MII_SET(XL_MII_CLK);
|
|
|
|
XL_UNLOCK(sc);
|
|
|
|
if (ack)
|
|
return(1);
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Write to a PHY register through the MII.
|
|
*/
|
|
static int
|
|
xl_mii_writereg(sc, frame)
|
|
struct xl_softc *sc;
|
|
struct xl_mii_frame *frame;
|
|
|
|
{
|
|
XL_LOCK(sc);
|
|
|
|
/*
|
|
* Set up frame for TX.
|
|
*/
|
|
|
|
frame->mii_stdelim = XL_MII_STARTDELIM;
|
|
frame->mii_opcode = XL_MII_WRITEOP;
|
|
frame->mii_turnaround = XL_MII_TURNAROUND;
|
|
|
|
/*
|
|
* Select the window 4.
|
|
*/
|
|
XL_SEL_WIN(4);
|
|
|
|
/*
|
|
* Turn on data output.
|
|
*/
|
|
MII_SET(XL_MII_DIR);
|
|
|
|
xl_mii_sync(sc);
|
|
|
|
xl_mii_send(sc, frame->mii_stdelim, 2);
|
|
xl_mii_send(sc, frame->mii_opcode, 2);
|
|
xl_mii_send(sc, frame->mii_phyaddr, 5);
|
|
xl_mii_send(sc, frame->mii_regaddr, 5);
|
|
xl_mii_send(sc, frame->mii_turnaround, 2);
|
|
xl_mii_send(sc, frame->mii_data, 16);
|
|
|
|
/* Idle bit. */
|
|
MII_SET(XL_MII_CLK);
|
|
MII_CLR(XL_MII_CLK);
|
|
|
|
/*
|
|
* Turn off xmit.
|
|
*/
|
|
MII_CLR(XL_MII_DIR);
|
|
|
|
XL_UNLOCK(sc);
|
|
|
|
return(0);
|
|
}
|
|
|
|
static int
|
|
xl_miibus_readreg(dev, phy, reg)
|
|
device_t dev;
|
|
int phy, reg;
|
|
{
|
|
struct xl_softc *sc;
|
|
struct xl_mii_frame frame;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
/*
|
|
* Pretend that PHYs are only available at MII address 24.
|
|
* This is to guard against problems with certain 3Com ASIC
|
|
* revisions that incorrectly map the internal transceiver
|
|
* control registers at all MII addresses. This can cause
|
|
* the miibus code to attach the same PHY several times over.
|
|
*/
|
|
if ((!(sc->xl_flags & XL_FLAG_PHYOK)) && phy != 24)
|
|
return(0);
|
|
|
|
bzero((char *)&frame, sizeof(frame));
|
|
|
|
frame.mii_phyaddr = phy;
|
|
frame.mii_regaddr = reg;
|
|
xl_mii_readreg(sc, &frame);
|
|
|
|
return(frame.mii_data);
|
|
}
|
|
|
|
static int
|
|
xl_miibus_writereg(dev, phy, reg, data)
|
|
device_t dev;
|
|
int phy, reg, data;
|
|
{
|
|
struct xl_softc *sc;
|
|
struct xl_mii_frame frame;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
if ((!(sc->xl_flags & XL_FLAG_PHYOK)) && phy != 24)
|
|
return(0);
|
|
|
|
bzero((char *)&frame, sizeof(frame));
|
|
|
|
frame.mii_phyaddr = phy;
|
|
frame.mii_regaddr = reg;
|
|
frame.mii_data = data;
|
|
|
|
xl_mii_writereg(sc, &frame);
|
|
|
|
return(0);
|
|
}
|
|
|
|
static void
|
|
xl_miibus_statchg(dev)
|
|
device_t dev;
|
|
{
|
|
struct xl_softc *sc;
|
|
struct mii_data *mii;
|
|
|
|
|
|
sc = device_get_softc(dev);
|
|
mii = device_get_softc(sc->xl_miibus);
|
|
|
|
XL_LOCK(sc);
|
|
|
|
xl_setcfg(sc);
|
|
|
|
/* Set ASIC's duplex mode to match the PHY. */
|
|
XL_SEL_WIN(3);
|
|
if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX)
|
|
CSR_WRITE_1(sc, XL_W3_MAC_CTRL, XL_MACCTRL_DUPLEX);
|
|
else
|
|
CSR_WRITE_1(sc, XL_W3_MAC_CTRL,
|
|
(CSR_READ_1(sc, XL_W3_MAC_CTRL) & ~XL_MACCTRL_DUPLEX));
|
|
|
|
XL_UNLOCK(sc);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Special support for the 3c905B-COMBO. This card has 10/100 support
|
|
* plus BNC and AUI ports. This means we will have both an miibus attached
|
|
* plus some non-MII media settings. In order to allow this, we have to
|
|
* add the extra media to the miibus's ifmedia struct, but we can't do
|
|
* that during xl_attach() because the miibus hasn't been attached yet.
|
|
* So instead, we wait until the miibus probe/attach is done, at which
|
|
* point we will get a callback telling is that it's safe to add our
|
|
* extra media.
|
|
*/
|
|
static void
|
|
xl_miibus_mediainit(dev)
|
|
device_t dev;
|
|
{
|
|
struct xl_softc *sc;
|
|
struct mii_data *mii;
|
|
struct ifmedia *ifm;
|
|
|
|
sc = device_get_softc(dev);
|
|
mii = device_get_softc(sc->xl_miibus);
|
|
ifm = &mii->mii_media;
|
|
|
|
XL_LOCK(sc);
|
|
|
|
if (sc->xl_media & (XL_MEDIAOPT_AUI|XL_MEDIAOPT_10FL)) {
|
|
/*
|
|
* Check for a 10baseFL board in disguise.
|
|
*/
|
|
if (sc->xl_type == XL_TYPE_905B &&
|
|
sc->xl_media == XL_MEDIAOPT_10FL) {
|
|
if (bootverbose)
|
|
printf("xl%d: found 10baseFL\n", sc->xl_unit);
|
|
ifmedia_add(ifm, IFM_ETHER|IFM_10_FL, 0, NULL);
|
|
ifmedia_add(ifm, IFM_ETHER|IFM_10_FL|IFM_HDX, 0, NULL);
|
|
if (sc->xl_caps & XL_CAPS_FULL_DUPLEX)
|
|
ifmedia_add(ifm,
|
|
IFM_ETHER|IFM_10_FL|IFM_FDX, 0, NULL);
|
|
} else {
|
|
if (bootverbose)
|
|
printf("xl%d: found AUI\n", sc->xl_unit);
|
|
ifmedia_add(ifm, IFM_ETHER|IFM_10_5, 0, NULL);
|
|
}
|
|
}
|
|
|
|
if (sc->xl_media & XL_MEDIAOPT_BNC) {
|
|
if (bootverbose)
|
|
printf("xl%d: found BNC\n", sc->xl_unit);
|
|
ifmedia_add(ifm, IFM_ETHER|IFM_10_2, 0, NULL);
|
|
}
|
|
|
|
XL_UNLOCK(sc);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* The EEPROM is slow: give it time to come ready after issuing
|
|
* it a command.
|
|
*/
|
|
static int
|
|
xl_eeprom_wait(sc)
|
|
struct xl_softc *sc;
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < 100; i++) {
|
|
if (CSR_READ_2(sc, XL_W0_EE_CMD) & XL_EE_BUSY)
|
|
DELAY(162);
|
|
else
|
|
break;
|
|
}
|
|
|
|
if (i == 100) {
|
|
printf("xl%d: eeprom failed to come ready\n", sc->xl_unit);
|
|
return(1);
|
|
}
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Read a sequence of words from the EEPROM. Note that ethernet address
|
|
* data is stored in the EEPROM in network byte order.
|
|
*/
|
|
static int
|
|
xl_read_eeprom(sc, dest, off, cnt, swap)
|
|
struct xl_softc *sc;
|
|
caddr_t dest;
|
|
int off;
|
|
int cnt;
|
|
int swap;
|
|
{
|
|
int err = 0, i;
|
|
u_int16_t word = 0, *ptr;
|
|
#define EEPROM_5BIT_OFFSET(A) ((((A) << 2) & 0x7F00) | ((A) & 0x003F))
|
|
#define EEPROM_8BIT_OFFSET(A) ((A) & 0x003F)
|
|
/* WARNING! DANGER!
|
|
* It's easy to accidentally overwrite the rom content!
|
|
* Note: the 3c575 uses 8bit EEPROM offsets.
|
|
*/
|
|
XL_SEL_WIN(0);
|
|
|
|
if (xl_eeprom_wait(sc))
|
|
return(1);
|
|
|
|
if (sc->xl_flags & XL_FLAG_EEPROM_OFFSET_30)
|
|
off += 0x30;
|
|
|
|
for (i = 0; i < cnt; i++) {
|
|
if (sc->xl_flags & XL_FLAG_8BITROM)
|
|
CSR_WRITE_2(sc, XL_W0_EE_CMD,
|
|
XL_EE_8BIT_READ | EEPROM_8BIT_OFFSET(off + i));
|
|
else
|
|
CSR_WRITE_2(sc, XL_W0_EE_CMD,
|
|
XL_EE_READ | EEPROM_5BIT_OFFSET(off + i));
|
|
err = xl_eeprom_wait(sc);
|
|
if (err)
|
|
break;
|
|
word = CSR_READ_2(sc, XL_W0_EE_DATA);
|
|
ptr = (u_int16_t *)(dest + (i * 2));
|
|
if (swap)
|
|
*ptr = ntohs(word);
|
|
else
|
|
*ptr = word;
|
|
}
|
|
|
|
return(err ? 1 : 0);
|
|
}
|
|
|
|
/*
|
|
* This routine is taken from the 3Com Etherlink XL manual,
|
|
* page 10-7. It calculates a CRC of the supplied multicast
|
|
* group address and returns the lower 8 bits, which are used
|
|
* as the multicast filter position.
|
|
* Note: the 3c905B currently only supports a 64-bit hash table,
|
|
* which means we really only need 6 bits, but the manual indicates
|
|
* that future chip revisions will have a 256-bit hash table,
|
|
* hence the routine is set up to calculate 8 bits of position
|
|
* info in case we need it some day.
|
|
* Note II, The Sequel: _CURRENT_ versions of the 3c905B have a
|
|
* 256 bit hash table. This means we have to use all 8 bits regardless.
|
|
* On older cards, the upper 2 bits will be ignored. Grrrr....
|
|
*/
|
|
static u_int8_t xl_calchash(addr)
|
|
caddr_t addr;
|
|
{
|
|
u_int32_t crc, carry;
|
|
int i, j;
|
|
u_int8_t c;
|
|
|
|
/* Compute CRC for the address value. */
|
|
crc = 0xFFFFFFFF; /* initial value */
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
c = *(addr + i);
|
|
for (j = 0; j < 8; j++) {
|
|
carry = ((crc & 0x80000000) ? 1 : 0) ^ (c & 0x01);
|
|
crc <<= 1;
|
|
c >>= 1;
|
|
if (carry)
|
|
crc = (crc ^ 0x04c11db6) | carry;
|
|
}
|
|
}
|
|
|
|
/* return the filter bit position */
|
|
return(crc & 0x000000FF);
|
|
}
|
|
|
|
/*
|
|
* NICs older than the 3c905B have only one multicast option, which
|
|
* is to enable reception of all multicast frames.
|
|
*/
|
|
static void
|
|
xl_setmulti(sc)
|
|
struct xl_softc *sc;
|
|
{
|
|
struct ifnet *ifp;
|
|
struct ifmultiaddr *ifma;
|
|
u_int8_t rxfilt;
|
|
int mcnt = 0;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
XL_SEL_WIN(5);
|
|
rxfilt = CSR_READ_1(sc, XL_W5_RX_FILTER);
|
|
|
|
if (ifp->if_flags & IFF_ALLMULTI) {
|
|
rxfilt |= XL_RXFILTER_ALLMULTI;
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_SET_FILT|rxfilt);
|
|
return;
|
|
}
|
|
|
|
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link)
|
|
mcnt++;
|
|
|
|
if (mcnt)
|
|
rxfilt |= XL_RXFILTER_ALLMULTI;
|
|
else
|
|
rxfilt &= ~XL_RXFILTER_ALLMULTI;
|
|
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_SET_FILT|rxfilt);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* 3c905B adapters have a hash filter that we can program.
|
|
*/
|
|
static void
|
|
xl_setmulti_hash(sc)
|
|
struct xl_softc *sc;
|
|
{
|
|
struct ifnet *ifp;
|
|
int h = 0, i;
|
|
struct ifmultiaddr *ifma;
|
|
u_int8_t rxfilt;
|
|
int mcnt = 0;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
XL_SEL_WIN(5);
|
|
rxfilt = CSR_READ_1(sc, XL_W5_RX_FILTER);
|
|
|
|
if (ifp->if_flags & IFF_ALLMULTI) {
|
|
rxfilt |= XL_RXFILTER_ALLMULTI;
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_SET_FILT|rxfilt);
|
|
return;
|
|
} else
|
|
rxfilt &= ~XL_RXFILTER_ALLMULTI;
|
|
|
|
|
|
/* first, zot all the existing hash bits */
|
|
for (i = 0; i < XL_HASHFILT_SIZE; i++)
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_SET_HASH|i);
|
|
|
|
/* now program new ones */
|
|
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
|
|
if (ifma->ifma_addr->sa_family != AF_LINK)
|
|
continue;
|
|
h = xl_calchash(LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_SET_HASH|XL_HASH_SET|h);
|
|
mcnt++;
|
|
}
|
|
|
|
if (mcnt)
|
|
rxfilt |= XL_RXFILTER_MULTIHASH;
|
|
else
|
|
rxfilt &= ~XL_RXFILTER_MULTIHASH;
|
|
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_SET_FILT|rxfilt);
|
|
|
|
return;
|
|
}
|
|
|
|
#ifdef notdef
|
|
static void
|
|
xl_testpacket(sc)
|
|
struct xl_softc *sc;
|
|
{
|
|
struct mbuf *m;
|
|
struct ifnet *ifp;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
MGETHDR(m, M_DONTWAIT, MT_DATA);
|
|
|
|
if (m == NULL)
|
|
return;
|
|
|
|
bcopy(&sc->arpcom.ac_enaddr,
|
|
mtod(m, struct ether_header *)->ether_dhost, ETHER_ADDR_LEN);
|
|
bcopy(&sc->arpcom.ac_enaddr,
|
|
mtod(m, struct ether_header *)->ether_shost, ETHER_ADDR_LEN);
|
|
mtod(m, struct ether_header *)->ether_type = htons(3);
|
|
mtod(m, unsigned char *)[14] = 0;
|
|
mtod(m, unsigned char *)[15] = 0;
|
|
mtod(m, unsigned char *)[16] = 0xE3;
|
|
m->m_len = m->m_pkthdr.len = sizeof(struct ether_header) + 3;
|
|
IF_ENQUEUE(&ifp->if_snd, m);
|
|
xl_start(ifp);
|
|
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
static void
|
|
xl_setcfg(sc)
|
|
struct xl_softc *sc;
|
|
{
|
|
u_int32_t icfg;
|
|
|
|
XL_SEL_WIN(3);
|
|
icfg = CSR_READ_4(sc, XL_W3_INTERNAL_CFG);
|
|
icfg &= ~XL_ICFG_CONNECTOR_MASK;
|
|
if (sc->xl_media & XL_MEDIAOPT_MII ||
|
|
sc->xl_media & XL_MEDIAOPT_BT4)
|
|
icfg |= (XL_XCVR_MII << XL_ICFG_CONNECTOR_BITS);
|
|
if (sc->xl_media & XL_MEDIAOPT_BTX)
|
|
icfg |= (XL_XCVR_AUTO << XL_ICFG_CONNECTOR_BITS);
|
|
|
|
CSR_WRITE_4(sc, XL_W3_INTERNAL_CFG, icfg);
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_COAX_STOP);
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
xl_setmode(sc, media)
|
|
struct xl_softc *sc;
|
|
int media;
|
|
{
|
|
u_int32_t icfg;
|
|
u_int16_t mediastat;
|
|
|
|
printf("xl%d: selecting ", sc->xl_unit);
|
|
|
|
XL_SEL_WIN(4);
|
|
mediastat = CSR_READ_2(sc, XL_W4_MEDIA_STATUS);
|
|
XL_SEL_WIN(3);
|
|
icfg = CSR_READ_4(sc, XL_W3_INTERNAL_CFG);
|
|
|
|
if (sc->xl_media & XL_MEDIAOPT_BT) {
|
|
if (IFM_SUBTYPE(media) == IFM_10_T) {
|
|
printf("10baseT transceiver, ");
|
|
sc->xl_xcvr = XL_XCVR_10BT;
|
|
icfg &= ~XL_ICFG_CONNECTOR_MASK;
|
|
icfg |= (XL_XCVR_10BT << XL_ICFG_CONNECTOR_BITS);
|
|
mediastat |= XL_MEDIASTAT_LINKBEAT|
|
|
XL_MEDIASTAT_JABGUARD;
|
|
mediastat &= ~XL_MEDIASTAT_SQEENB;
|
|
}
|
|
}
|
|
|
|
if (sc->xl_media & XL_MEDIAOPT_BFX) {
|
|
if (IFM_SUBTYPE(media) == IFM_100_FX) {
|
|
printf("100baseFX port, ");
|
|
sc->xl_xcvr = XL_XCVR_100BFX;
|
|
icfg &= ~XL_ICFG_CONNECTOR_MASK;
|
|
icfg |= (XL_XCVR_100BFX << XL_ICFG_CONNECTOR_BITS);
|
|
mediastat |= XL_MEDIASTAT_LINKBEAT;
|
|
mediastat &= ~XL_MEDIASTAT_SQEENB;
|
|
}
|
|
}
|
|
|
|
if (sc->xl_media & (XL_MEDIAOPT_AUI|XL_MEDIAOPT_10FL)) {
|
|
if (IFM_SUBTYPE(media) == IFM_10_5) {
|
|
printf("AUI port, ");
|
|
sc->xl_xcvr = XL_XCVR_AUI;
|
|
icfg &= ~XL_ICFG_CONNECTOR_MASK;
|
|
icfg |= (XL_XCVR_AUI << XL_ICFG_CONNECTOR_BITS);
|
|
mediastat &= ~(XL_MEDIASTAT_LINKBEAT|
|
|
XL_MEDIASTAT_JABGUARD);
|
|
mediastat |= ~XL_MEDIASTAT_SQEENB;
|
|
}
|
|
if (IFM_SUBTYPE(media) == IFM_10_FL) {
|
|
printf("10baseFL transceiver, ");
|
|
sc->xl_xcvr = XL_XCVR_AUI;
|
|
icfg &= ~XL_ICFG_CONNECTOR_MASK;
|
|
icfg |= (XL_XCVR_AUI << XL_ICFG_CONNECTOR_BITS);
|
|
mediastat &= ~(XL_MEDIASTAT_LINKBEAT|
|
|
XL_MEDIASTAT_JABGUARD);
|
|
mediastat |= ~XL_MEDIASTAT_SQEENB;
|
|
}
|
|
}
|
|
|
|
if (sc->xl_media & XL_MEDIAOPT_BNC) {
|
|
if (IFM_SUBTYPE(media) == IFM_10_2) {
|
|
printf("BNC port, ");
|
|
sc->xl_xcvr = XL_XCVR_COAX;
|
|
icfg &= ~XL_ICFG_CONNECTOR_MASK;
|
|
icfg |= (XL_XCVR_COAX << XL_ICFG_CONNECTOR_BITS);
|
|
mediastat &= ~(XL_MEDIASTAT_LINKBEAT|
|
|
XL_MEDIASTAT_JABGUARD|
|
|
XL_MEDIASTAT_SQEENB);
|
|
}
|
|
}
|
|
|
|
if ((media & IFM_GMASK) == IFM_FDX ||
|
|
IFM_SUBTYPE(media) == IFM_100_FX) {
|
|
printf("full duplex\n");
|
|
XL_SEL_WIN(3);
|
|
CSR_WRITE_1(sc, XL_W3_MAC_CTRL, XL_MACCTRL_DUPLEX);
|
|
} else {
|
|
printf("half duplex\n");
|
|
XL_SEL_WIN(3);
|
|
CSR_WRITE_1(sc, XL_W3_MAC_CTRL,
|
|
(CSR_READ_1(sc, XL_W3_MAC_CTRL) & ~XL_MACCTRL_DUPLEX));
|
|
}
|
|
|
|
if (IFM_SUBTYPE(media) == IFM_10_2)
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_COAX_START);
|
|
else
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_COAX_STOP);
|
|
CSR_WRITE_4(sc, XL_W3_INTERNAL_CFG, icfg);
|
|
XL_SEL_WIN(4);
|
|
CSR_WRITE_2(sc, XL_W4_MEDIA_STATUS, mediastat);
|
|
DELAY(800);
|
|
XL_SEL_WIN(7);
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
xl_reset(sc)
|
|
struct xl_softc *sc;
|
|
{
|
|
register int i;
|
|
|
|
XL_SEL_WIN(0);
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RESET |
|
|
((sc->xl_flags & XL_FLAG_WEIRDRESET) ?
|
|
XL_RESETOPT_DISADVFD:0));
|
|
|
|
/*
|
|
* If we're using memory mapped register mode, pause briefly
|
|
* after issuing the reset command before trying to access any
|
|
* other registers. With my 3c575C cardbus card, failing to do
|
|
* this results in the system locking up while trying to poll
|
|
* the command busy bit in the status register.
|
|
*/
|
|
if (sc->xl_flags & XL_FLAG_USE_MMIO)
|
|
DELAY(100000);
|
|
|
|
for (i = 0; i < XL_TIMEOUT; i++) {
|
|
DELAY(10);
|
|
if (!(CSR_READ_2(sc, XL_STATUS) & XL_STAT_CMDBUSY))
|
|
break;
|
|
}
|
|
|
|
if (i == XL_TIMEOUT)
|
|
printf("xl%d: reset didn't complete\n", sc->xl_unit);
|
|
|
|
/* Reset TX and RX. */
|
|
/* Note: the RX reset takes an absurd amount of time
|
|
* on newer versions of the Tornado chips such as those
|
|
* on the 3c905CX and newer 3c908C cards. We wait an
|
|
* extra amount of time so that xl_wait() doesn't complain
|
|
* and annoy the users.
|
|
*/
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_RESET);
|
|
DELAY(100000);
|
|
xl_wait(sc);
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_RESET);
|
|
xl_wait(sc);
|
|
|
|
if (sc->xl_flags & XL_FLAG_INVERT_LED_PWR ||
|
|
sc->xl_flags & XL_FLAG_INVERT_MII_PWR) {
|
|
XL_SEL_WIN(2);
|
|
CSR_WRITE_2(sc, XL_W2_RESET_OPTIONS, CSR_READ_2(sc,
|
|
XL_W2_RESET_OPTIONS)
|
|
| ((sc->xl_flags & XL_FLAG_INVERT_LED_PWR)?XL_RESETOPT_INVERT_LED:0)
|
|
| ((sc->xl_flags & XL_FLAG_INVERT_MII_PWR)?XL_RESETOPT_INVERT_MII:0)
|
|
);
|
|
}
|
|
|
|
/* Wait a little while for the chip to get its brains in order. */
|
|
DELAY(100000);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Probe for a 3Com Etherlink XL chip. Check the PCI vendor and device
|
|
* IDs against our list and return a device name if we find a match.
|
|
*/
|
|
static int
|
|
xl_probe(dev)
|
|
device_t dev;
|
|
{
|
|
struct xl_type *t;
|
|
|
|
t = xl_devs;
|
|
|
|
while(t->xl_name != NULL) {
|
|
if ((pci_get_vendor(dev) == t->xl_vid) &&
|
|
(pci_get_device(dev) == t->xl_did)) {
|
|
device_set_desc(dev, t->xl_name);
|
|
return(0);
|
|
}
|
|
t++;
|
|
}
|
|
|
|
return(ENXIO);
|
|
}
|
|
|
|
/*
|
|
* This routine is a kludge to work around possible hardware faults
|
|
* or manufacturing defects that can cause the media options register
|
|
* (or reset options register, as it's called for the first generation
|
|
* 3c90x adapters) to return an incorrect result. I have encountered
|
|
* one Dell Latitude laptop docking station with an integrated 3c905-TX
|
|
* which doesn't have any of the 'mediaopt' bits set. This screws up
|
|
* the attach routine pretty badly because it doesn't know what media
|
|
* to look for. If we find ourselves in this predicament, this routine
|
|
* will try to guess the media options values and warn the user of a
|
|
* possible manufacturing defect with his adapter/system/whatever.
|
|
*/
|
|
static void
|
|
xl_mediacheck(sc)
|
|
struct xl_softc *sc;
|
|
{
|
|
|
|
/*
|
|
* If some of the media options bits are set, assume they are
|
|
* correct. If not, try to figure it out down below.
|
|
* XXX I should check for 10baseFL, but I don't have an adapter
|
|
* to test with.
|
|
*/
|
|
if (sc->xl_media & (XL_MEDIAOPT_MASK & ~XL_MEDIAOPT_VCO)) {
|
|
/*
|
|
* Check the XCVR value. If it's not in the normal range
|
|
* of values, we need to fake it up here.
|
|
*/
|
|
if (sc->xl_xcvr <= XL_XCVR_AUTO)
|
|
return;
|
|
else {
|
|
printf("xl%d: bogus xcvr value "
|
|
"in EEPROM (%x)\n", sc->xl_unit, sc->xl_xcvr);
|
|
printf("xl%d: choosing new default based "
|
|
"on card type\n", sc->xl_unit);
|
|
}
|
|
} else {
|
|
if (sc->xl_type == XL_TYPE_905B &&
|
|
sc->xl_media & XL_MEDIAOPT_10FL)
|
|
return;
|
|
printf("xl%d: WARNING: no media options bits set in "
|
|
"the media options register!!\n", sc->xl_unit);
|
|
printf("xl%d: this could be a manufacturing defect in "
|
|
"your adapter or system\n", sc->xl_unit);
|
|
printf("xl%d: attempting to guess media type; you "
|
|
"should probably consult your vendor\n", sc->xl_unit);
|
|
}
|
|
|
|
xl_choose_xcvr(sc, 1);
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
xl_choose_xcvr(sc, verbose)
|
|
struct xl_softc *sc;
|
|
int verbose;
|
|
{
|
|
u_int16_t devid;
|
|
|
|
/*
|
|
* Read the device ID from the EEPROM.
|
|
* This is what's loaded into the PCI device ID register, so it has
|
|
* to be correct otherwise we wouldn't have gotten this far.
|
|
*/
|
|
xl_read_eeprom(sc, (caddr_t)&devid, XL_EE_PRODID, 1, 0);
|
|
|
|
switch(devid) {
|
|
case TC_DEVICEID_BOOMERANG_10BT: /* 3c900-TPO */
|
|
case TC_DEVICEID_KRAKATOA_10BT: /* 3c900B-TPO */
|
|
sc->xl_media = XL_MEDIAOPT_BT;
|
|
sc->xl_xcvr = XL_XCVR_10BT;
|
|
if (verbose)
|
|
printf("xl%d: guessing 10BaseT "
|
|
"transceiver\n", sc->xl_unit);
|
|
break;
|
|
case TC_DEVICEID_BOOMERANG_10BT_COMBO: /* 3c900-COMBO */
|
|
case TC_DEVICEID_KRAKATOA_10BT_COMBO: /* 3c900B-COMBO */
|
|
sc->xl_media = XL_MEDIAOPT_BT|XL_MEDIAOPT_BNC|XL_MEDIAOPT_AUI;
|
|
sc->xl_xcvr = XL_XCVR_10BT;
|
|
if (verbose)
|
|
printf("xl%d: guessing COMBO "
|
|
"(AUI/BNC/TP)\n", sc->xl_unit);
|
|
break;
|
|
case TC_DEVICEID_KRAKATOA_10BT_TPC: /* 3c900B-TPC */
|
|
sc->xl_media = XL_MEDIAOPT_BT|XL_MEDIAOPT_BNC;
|
|
sc->xl_xcvr = XL_XCVR_10BT;
|
|
if (verbose)
|
|
printf("xl%d: guessing TPC (BNC/TP)\n", sc->xl_unit);
|
|
break;
|
|
case TC_DEVICEID_CYCLONE_10FL: /* 3c900B-FL */
|
|
sc->xl_media = XL_MEDIAOPT_10FL;
|
|
sc->xl_xcvr = XL_XCVR_AUI;
|
|
if (verbose)
|
|
printf("xl%d: guessing 10baseFL\n", sc->xl_unit);
|
|
break;
|
|
case TC_DEVICEID_BOOMERANG_10_100BT: /* 3c905-TX */
|
|
case TC_DEVICEID_HURRICANE_555: /* 3c555 */
|
|
case TC_DEVICEID_HURRICANE_556: /* 3c556 */
|
|
case TC_DEVICEID_HURRICANE_556B: /* 3c556B */
|
|
case TC_DEVICEID_HURRICANE_575A: /* 3c575TX */
|
|
case TC_DEVICEID_HURRICANE_575B: /* 3c575B */
|
|
case TC_DEVICEID_HURRICANE_575C: /* 3c575C */
|
|
case TC_DEVICEID_HURRICANE_656: /* 3c656 */
|
|
case TC_DEVICEID_HURRICANE_656B: /* 3c656B */
|
|
case TC_DEVICEID_TORNADO_656C: /* 3c656C */
|
|
case TC_DEVICEID_TORNADO_10_100BT_920B: /* 3c920B-EMB */
|
|
sc->xl_media = XL_MEDIAOPT_MII;
|
|
sc->xl_xcvr = XL_XCVR_MII;
|
|
if (verbose)
|
|
printf("xl%d: guessing MII\n", sc->xl_unit);
|
|
break;
|
|
case TC_DEVICEID_BOOMERANG_100BT4: /* 3c905-T4 */
|
|
case TC_DEVICEID_CYCLONE_10_100BT4: /* 3c905B-T4 */
|
|
sc->xl_media = XL_MEDIAOPT_BT4;
|
|
sc->xl_xcvr = XL_XCVR_MII;
|
|
if (verbose)
|
|
printf("xl%d: guessing 100BaseT4/MII\n", sc->xl_unit);
|
|
break;
|
|
case TC_DEVICEID_HURRICANE_10_100BT: /* 3c905B-TX */
|
|
case TC_DEVICEID_HURRICANE_10_100BT_SERV:/*3c980-TX */
|
|
case TC_DEVICEID_TORNADO_10_100BT_SERV: /* 3c980C-TX */
|
|
case TC_DEVICEID_HURRICANE_SOHO100TX: /* 3cSOHO100-TX */
|
|
case TC_DEVICEID_TORNADO_10_100BT: /* 3c905C-TX */
|
|
case TC_DEVICEID_TORNADO_HOMECONNECT: /* 3c450-TX */
|
|
sc->xl_media = XL_MEDIAOPT_BTX;
|
|
sc->xl_xcvr = XL_XCVR_AUTO;
|
|
if (verbose)
|
|
printf("xl%d: guessing 10/100 internal\n", sc->xl_unit);
|
|
break;
|
|
case TC_DEVICEID_CYCLONE_10_100_COMBO: /* 3c905B-COMBO */
|
|
sc->xl_media = XL_MEDIAOPT_BTX|XL_MEDIAOPT_BNC|XL_MEDIAOPT_AUI;
|
|
sc->xl_xcvr = XL_XCVR_AUTO;
|
|
if (verbose)
|
|
printf("xl%d: guessing 10/100 "
|
|
"plus BNC/AUI\n", sc->xl_unit);
|
|
break;
|
|
default:
|
|
printf("xl%d: unknown device ID: %x -- "
|
|
"defaulting to 10baseT\n", sc->xl_unit, devid);
|
|
sc->xl_media = XL_MEDIAOPT_BT;
|
|
break;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Attach the interface. Allocate softc structures, do ifmedia
|
|
* setup and ethernet/BPF attach.
|
|
*/
|
|
static int
|
|
xl_attach(dev)
|
|
device_t dev;
|
|
{
|
|
u_char eaddr[ETHER_ADDR_LEN];
|
|
u_int16_t xcvr[2];
|
|
struct xl_softc *sc;
|
|
struct ifnet *ifp;
|
|
int media = IFM_ETHER|IFM_100_TX|IFM_FDX;
|
|
int unit, error = 0, rid, res;
|
|
uint16_t did;
|
|
|
|
sc = device_get_softc(dev);
|
|
unit = device_get_unit(dev);
|
|
|
|
mtx_init(&sc->xl_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
|
|
MTX_DEF | MTX_RECURSE);
|
|
ifmedia_init(&sc->ifmedia, 0, xl_ifmedia_upd, xl_ifmedia_sts);
|
|
|
|
did = pci_get_device(dev);
|
|
|
|
sc->xl_flags = 0;
|
|
if (did == TC_DEVICEID_HURRICANE_555)
|
|
sc->xl_flags |= XL_FLAG_EEPROM_OFFSET_30 | XL_FLAG_PHYOK;
|
|
if (did == TC_DEVICEID_HURRICANE_556 ||
|
|
did == TC_DEVICEID_HURRICANE_556B)
|
|
sc->xl_flags |= XL_FLAG_FUNCREG | XL_FLAG_PHYOK |
|
|
XL_FLAG_EEPROM_OFFSET_30 | XL_FLAG_WEIRDRESET |
|
|
XL_FLAG_INVERT_LED_PWR | XL_FLAG_INVERT_MII_PWR;
|
|
if (did == TC_DEVICEID_HURRICANE_555 ||
|
|
did == TC_DEVICEID_HURRICANE_556)
|
|
sc->xl_flags |= XL_FLAG_8BITROM;
|
|
if (did == TC_DEVICEID_HURRICANE_556B)
|
|
sc->xl_flags |= XL_FLAG_NO_XCVR_PWR;
|
|
|
|
if (did == TC_DEVICEID_HURRICANE_575A ||
|
|
did == TC_DEVICEID_HURRICANE_575B ||
|
|
did == TC_DEVICEID_HURRICANE_575C ||
|
|
did == TC_DEVICEID_HURRICANE_656B ||
|
|
did == TC_DEVICEID_TORNADO_656C)
|
|
sc->xl_flags |= XL_FLAG_FUNCREG | XL_FLAG_PHYOK |
|
|
XL_FLAG_EEPROM_OFFSET_30 | XL_FLAG_8BITROM;
|
|
if (did == TC_DEVICEID_HURRICANE_656)
|
|
sc->xl_flags |= XL_FLAG_FUNCREG | XL_FLAG_PHYOK;
|
|
if (did == TC_DEVICEID_HURRICANE_575B)
|
|
sc->xl_flags |= XL_FLAG_INVERT_LED_PWR;
|
|
if (did == TC_DEVICEID_HURRICANE_575C)
|
|
sc->xl_flags |= XL_FLAG_INVERT_MII_PWR;
|
|
if (did == TC_DEVICEID_TORNADO_656C)
|
|
sc->xl_flags |= XL_FLAG_INVERT_MII_PWR;
|
|
if (did == TC_DEVICEID_HURRICANE_656 ||
|
|
did == TC_DEVICEID_HURRICANE_656B)
|
|
sc->xl_flags |= XL_FLAG_INVERT_MII_PWR |
|
|
XL_FLAG_INVERT_LED_PWR;
|
|
if (did == TC_DEVICEID_TORNADO_10_100BT_920B)
|
|
sc->xl_flags |= XL_FLAG_PHYOK;
|
|
|
|
switch (did) {
|
|
case TC_DEVICEID_HURRICANE_575A:
|
|
case TC_DEVICEID_HURRICANE_575B:
|
|
case TC_DEVICEID_HURRICANE_575C:
|
|
sc->xl_flags |= XL_FLAG_NO_MMIO;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
#ifndef BURN_BRIDGES
|
|
/*
|
|
* If this is a 3c905B, we have to check one extra thing.
|
|
* The 905B supports power management and may be placed in
|
|
* a low-power mode (D3 mode), typically by certain operating
|
|
* systems which shall not be named. The PCI BIOS is supposed
|
|
* to reset the NIC and bring it out of low-power mode, but
|
|
* some do not. Consequently, we have to see if this chip
|
|
* supports power management, and if so, make sure it's not
|
|
* in low-power mode. If power management is available, the
|
|
* capid byte will be 0x01.
|
|
*
|
|
* I _think_ that what actually happens is that the chip
|
|
* loses its PCI configuration during the transition from
|
|
* D3 back to D0; this means that it should be possible for
|
|
* us to save the PCI iobase, membase and IRQ, put the chip
|
|
* back in the D0 state, then restore the PCI config ourselves.
|
|
*/
|
|
|
|
if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) {
|
|
u_int32_t iobase, membase, irq;
|
|
|
|
/* Save important PCI config data. */
|
|
iobase = pci_read_config(dev, XL_PCI_LOIO, 4);
|
|
membase = pci_read_config(dev, XL_PCI_LOMEM, 4);
|
|
irq = pci_read_config(dev, XL_PCI_INTLINE, 4);
|
|
|
|
/* Reset the power state. */
|
|
printf("xl%d: chip is in D%d power mode "
|
|
"-- setting to D0\n", unit,
|
|
pci_get_powerstate(dev));
|
|
|
|
pci_set_powerstate(dev, PCI_POWERSTATE_D0);
|
|
|
|
/* Restore PCI config data. */
|
|
pci_write_config(dev, XL_PCI_LOIO, iobase, 4);
|
|
pci_write_config(dev, XL_PCI_LOMEM, membase, 4);
|
|
pci_write_config(dev, XL_PCI_INTLINE, irq, 4);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Map control/status registers.
|
|
*/
|
|
pci_enable_busmaster(dev);
|
|
|
|
if ((sc->xl_flags & XL_FLAG_NO_MMIO) == 0) {
|
|
rid = XL_PCI_LOMEM;
|
|
res = SYS_RES_MEMORY;
|
|
|
|
sc->xl_res = bus_alloc_resource(dev, res, &rid,
|
|
0, ~0, 1, RF_ACTIVE);
|
|
}
|
|
|
|
if (sc->xl_res != NULL) {
|
|
sc->xl_flags |= XL_FLAG_USE_MMIO;
|
|
if (bootverbose)
|
|
printf("xl%d: using memory mapped I/O\n", unit);
|
|
} else {
|
|
rid = XL_PCI_LOIO;
|
|
res = SYS_RES_IOPORT;
|
|
sc->xl_res = bus_alloc_resource(dev, res, &rid,
|
|
0, ~0, 1, RF_ACTIVE);
|
|
if (sc->xl_res == NULL) {
|
|
printf ("xl%d: couldn't map ports/memory\n", unit);
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
if (bootverbose)
|
|
printf("xl%d: using port I/O\n", unit);
|
|
}
|
|
|
|
sc->xl_btag = rman_get_bustag(sc->xl_res);
|
|
sc->xl_bhandle = rman_get_bushandle(sc->xl_res);
|
|
|
|
if (sc->xl_flags & XL_FLAG_FUNCREG) {
|
|
rid = XL_PCI_FUNCMEM;
|
|
sc->xl_fres = bus_alloc_resource(dev, SYS_RES_MEMORY, &rid,
|
|
0, ~0, 1, RF_ACTIVE);
|
|
|
|
if (sc->xl_fres == NULL) {
|
|
printf ("xl%d: couldn't map ports/memory\n", unit);
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
sc->xl_ftag = rman_get_bustag(sc->xl_fres);
|
|
sc->xl_fhandle = rman_get_bushandle(sc->xl_fres);
|
|
}
|
|
|
|
/* Allocate interrupt */
|
|
rid = 0;
|
|
sc->xl_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1,
|
|
RF_SHAREABLE | RF_ACTIVE);
|
|
if (sc->xl_irq == NULL) {
|
|
printf("xl%d: couldn't map interrupt\n", unit);
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
/* Reset the adapter. */
|
|
xl_reset(sc);
|
|
|
|
/*
|
|
* Get station address from the EEPROM.
|
|
*/
|
|
if (xl_read_eeprom(sc, (caddr_t)&eaddr, XL_EE_OEM_ADR0, 3, 1)) {
|
|
printf("xl%d: failed to read station address\n", sc->xl_unit);
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
/*
|
|
* A 3Com chip was detected. Inform the world.
|
|
*/
|
|
printf("xl%d: Ethernet address: %6D\n", unit, eaddr, ":");
|
|
|
|
sc->xl_unit = unit;
|
|
callout_handle_init(&sc->xl_stat_ch);
|
|
bcopy(eaddr, (char *)&sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
|
|
|
|
/*
|
|
* Now allocate a tag for the DMA descriptor lists and a chunk
|
|
* of DMA-able memory based on the tag. Also obtain the DMA
|
|
* addresses of the RX and TX ring, which we'll need later.
|
|
* All of our lists are allocated as a contiguous block
|
|
* of memory.
|
|
*/
|
|
error = bus_dma_tag_create(NULL, 8, 0,
|
|
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
|
|
XL_RX_LIST_SZ, 1, XL_RX_LIST_SZ, 0, NULL, NULL,
|
|
&sc->xl_ldata.xl_rx_tag);
|
|
if (error) {
|
|
printf("xl%d: failed to allocate rx dma tag\n", unit);
|
|
goto fail;
|
|
}
|
|
|
|
error = bus_dmamem_alloc(sc->xl_ldata.xl_rx_tag,
|
|
(void **)&sc->xl_ldata.xl_rx_list, BUS_DMA_NOWAIT | BUS_DMA_ZERO,
|
|
&sc->xl_ldata.xl_rx_dmamap);
|
|
if (error) {
|
|
printf("xl%d: no memory for rx list buffers!\n", unit);
|
|
bus_dma_tag_destroy(sc->xl_ldata.xl_rx_tag);
|
|
sc->xl_ldata.xl_rx_tag = NULL;
|
|
goto fail;
|
|
}
|
|
|
|
error = bus_dmamap_load(sc->xl_ldata.xl_rx_tag,
|
|
sc->xl_ldata.xl_rx_dmamap, sc->xl_ldata.xl_rx_list,
|
|
XL_RX_LIST_SZ, xl_dma_map_addr,
|
|
&sc->xl_ldata.xl_rx_dmaaddr, BUS_DMA_NOWAIT);
|
|
if (error) {
|
|
printf("xl%d: cannot get dma address of the rx ring!\n", unit);
|
|
bus_dmamem_free(sc->xl_ldata.xl_rx_tag, sc->xl_ldata.xl_rx_list,
|
|
sc->xl_ldata.xl_rx_dmamap);
|
|
bus_dma_tag_destroy(sc->xl_ldata.xl_rx_tag);
|
|
sc->xl_ldata.xl_rx_tag = NULL;
|
|
goto fail;
|
|
}
|
|
|
|
error = bus_dma_tag_create(NULL, 8, 0,
|
|
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
|
|
XL_TX_LIST_SZ, 1, XL_TX_LIST_SZ, 0, NULL, NULL,
|
|
&sc->xl_ldata.xl_tx_tag);
|
|
if (error) {
|
|
printf("xl%d: failed to allocate tx dma tag\n", unit);
|
|
goto fail;
|
|
}
|
|
|
|
error = bus_dmamem_alloc(sc->xl_ldata.xl_tx_tag,
|
|
(void **)&sc->xl_ldata.xl_tx_list, BUS_DMA_NOWAIT | BUS_DMA_ZERO,
|
|
&sc->xl_ldata.xl_tx_dmamap);
|
|
if (error) {
|
|
printf("xl%d: no memory for list buffers!\n", unit);
|
|
bus_dma_tag_destroy(sc->xl_ldata.xl_tx_tag);
|
|
sc->xl_ldata.xl_tx_tag = NULL;
|
|
goto fail;
|
|
}
|
|
|
|
error = bus_dmamap_load(sc->xl_ldata.xl_tx_tag,
|
|
sc->xl_ldata.xl_tx_dmamap, sc->xl_ldata.xl_tx_list,
|
|
XL_TX_LIST_SZ, xl_dma_map_addr,
|
|
&sc->xl_ldata.xl_tx_dmaaddr, BUS_DMA_NOWAIT);
|
|
if (error) {
|
|
printf("xl%d: cannot get dma address of the tx ring!\n", unit);
|
|
bus_dmamem_free(sc->xl_ldata.xl_tx_tag, sc->xl_ldata.xl_tx_list,
|
|
sc->xl_ldata.xl_tx_dmamap);
|
|
bus_dma_tag_destroy(sc->xl_ldata.xl_tx_tag);
|
|
sc->xl_ldata.xl_tx_tag = NULL;
|
|
goto fail;
|
|
}
|
|
|
|
/*
|
|
* Allocate a DMA tag for the mapping of mbufs.
|
|
*/
|
|
error = bus_dma_tag_create(NULL, 1, 0,
|
|
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
|
|
MCLBYTES * XL_MAXFRAGS, XL_MAXFRAGS, MCLBYTES, 0, NULL,
|
|
NULL, &sc->xl_mtag);
|
|
if (error) {
|
|
printf("xl%d: failed to allocate mbuf dma tag\n", unit);
|
|
goto fail;
|
|
}
|
|
|
|
/* We need a spare DMA map for the RX ring. */
|
|
error = bus_dmamap_create(sc->xl_mtag, 0, &sc->xl_tmpmap);
|
|
if (error)
|
|
goto fail;
|
|
|
|
/*
|
|
* Figure out the card type. 3c905B adapters have the
|
|
* 'supportsNoTxLength' bit set in the capabilities
|
|
* word in the EEPROM.
|
|
* Note: my 3c575C cardbus card lies. It returns a value
|
|
* of 0x1578 for its capabilities word, which is somewhat
|
|
* nonsensical. Another way to distinguish a 3c90x chip
|
|
* from a 3c90xB/C chip is to check for the 'supportsLargePackets'
|
|
* bit. This will only be set for 3c90x boomerage chips.
|
|
*/
|
|
xl_read_eeprom(sc, (caddr_t)&sc->xl_caps, XL_EE_CAPS, 1, 0);
|
|
if (sc->xl_caps & XL_CAPS_NO_TXLENGTH ||
|
|
!(sc->xl_caps & XL_CAPS_LARGE_PKTS))
|
|
sc->xl_type = XL_TYPE_905B;
|
|
else
|
|
sc->xl_type = XL_TYPE_90X;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
ifp->if_softc = sc;
|
|
ifp->if_unit = unit;
|
|
ifp->if_name = "xl";
|
|
ifp->if_mtu = ETHERMTU;
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_ioctl = xl_ioctl;
|
|
ifp->if_output = ether_output;
|
|
ifp->if_capabilities = IFCAP_VLAN_MTU;
|
|
if (sc->xl_type == XL_TYPE_905B) {
|
|
ifp->if_start = xl_start_90xB;
|
|
ifp->if_hwassist = XL905B_CSUM_FEATURES;
|
|
ifp->if_capabilities |= IFCAP_HWCSUM;
|
|
} else
|
|
ifp->if_start = xl_start;
|
|
ifp->if_watchdog = xl_watchdog;
|
|
ifp->if_init = xl_init;
|
|
ifp->if_baudrate = 10000000;
|
|
ifp->if_snd.ifq_maxlen = XL_TX_LIST_CNT - 1;
|
|
ifp->if_capenable = ifp->if_capabilities;
|
|
|
|
/*
|
|
* Now we have to see what sort of media we have.
|
|
* This includes probing for an MII interace and a
|
|
* possible PHY.
|
|
*/
|
|
XL_SEL_WIN(3);
|
|
sc->xl_media = CSR_READ_2(sc, XL_W3_MEDIA_OPT);
|
|
if (bootverbose)
|
|
printf("xl%d: media options word: %x\n", sc->xl_unit,
|
|
sc->xl_media);
|
|
|
|
xl_read_eeprom(sc, (char *)&xcvr, XL_EE_ICFG_0, 2, 0);
|
|
sc->xl_xcvr = xcvr[0] | xcvr[1] << 16;
|
|
sc->xl_xcvr &= XL_ICFG_CONNECTOR_MASK;
|
|
sc->xl_xcvr >>= XL_ICFG_CONNECTOR_BITS;
|
|
|
|
xl_mediacheck(sc);
|
|
|
|
if (sc->xl_media & XL_MEDIAOPT_MII || sc->xl_media & XL_MEDIAOPT_BTX
|
|
|| sc->xl_media & XL_MEDIAOPT_BT4) {
|
|
if (bootverbose)
|
|
printf("xl%d: found MII/AUTO\n", sc->xl_unit);
|
|
xl_setcfg(sc);
|
|
if (mii_phy_probe(dev, &sc->xl_miibus,
|
|
xl_ifmedia_upd, xl_ifmedia_sts)) {
|
|
printf("xl%d: no PHY found!\n", sc->xl_unit);
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
goto done;
|
|
}
|
|
|
|
/*
|
|
* Sanity check. If the user has selected "auto" and this isn't
|
|
* a 10/100 card of some kind, we need to force the transceiver
|
|
* type to something sane.
|
|
*/
|
|
if (sc->xl_xcvr == XL_XCVR_AUTO)
|
|
xl_choose_xcvr(sc, bootverbose);
|
|
|
|
/*
|
|
* Do ifmedia setup.
|
|
*/
|
|
if (sc->xl_media & XL_MEDIAOPT_BT) {
|
|
if (bootverbose)
|
|
printf("xl%d: found 10baseT\n", sc->xl_unit);
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T, 0, NULL);
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T|IFM_HDX, 0, NULL);
|
|
if (sc->xl_caps & XL_CAPS_FULL_DUPLEX)
|
|
ifmedia_add(&sc->ifmedia,
|
|
IFM_ETHER|IFM_10_T|IFM_FDX, 0, NULL);
|
|
}
|
|
|
|
if (sc->xl_media & (XL_MEDIAOPT_AUI|XL_MEDIAOPT_10FL)) {
|
|
/*
|
|
* Check for a 10baseFL board in disguise.
|
|
*/
|
|
if (sc->xl_type == XL_TYPE_905B &&
|
|
sc->xl_media == XL_MEDIAOPT_10FL) {
|
|
if (bootverbose)
|
|
printf("xl%d: found 10baseFL\n", sc->xl_unit);
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_FL, 0, NULL);
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_FL|IFM_HDX,
|
|
0, NULL);
|
|
if (sc->xl_caps & XL_CAPS_FULL_DUPLEX)
|
|
ifmedia_add(&sc->ifmedia,
|
|
IFM_ETHER|IFM_10_FL|IFM_FDX, 0, NULL);
|
|
} else {
|
|
if (bootverbose)
|
|
printf("xl%d: found AUI\n", sc->xl_unit);
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_5, 0, NULL);
|
|
}
|
|
}
|
|
|
|
if (sc->xl_media & XL_MEDIAOPT_BNC) {
|
|
if (bootverbose)
|
|
printf("xl%d: found BNC\n", sc->xl_unit);
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_2, 0, NULL);
|
|
}
|
|
|
|
if (sc->xl_media & XL_MEDIAOPT_BFX) {
|
|
if (bootverbose)
|
|
printf("xl%d: found 100baseFX\n", sc->xl_unit);
|
|
ifp->if_baudrate = 100000000;
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_100_FX, 0, NULL);
|
|
}
|
|
|
|
/* Choose a default media. */
|
|
switch(sc->xl_xcvr) {
|
|
case XL_XCVR_10BT:
|
|
media = IFM_ETHER|IFM_10_T;
|
|
xl_setmode(sc, media);
|
|
break;
|
|
case XL_XCVR_AUI:
|
|
if (sc->xl_type == XL_TYPE_905B &&
|
|
sc->xl_media == XL_MEDIAOPT_10FL) {
|
|
media = IFM_ETHER|IFM_10_FL;
|
|
xl_setmode(sc, media);
|
|
} else {
|
|
media = IFM_ETHER|IFM_10_5;
|
|
xl_setmode(sc, media);
|
|
}
|
|
break;
|
|
case XL_XCVR_COAX:
|
|
media = IFM_ETHER|IFM_10_2;
|
|
xl_setmode(sc, media);
|
|
break;
|
|
case XL_XCVR_AUTO:
|
|
case XL_XCVR_100BTX:
|
|
case XL_XCVR_MII:
|
|
/* Chosen by miibus */
|
|
break;
|
|
case XL_XCVR_100BFX:
|
|
media = IFM_ETHER|IFM_100_FX;
|
|
break;
|
|
default:
|
|
printf("xl%d: unknown XCVR type: %d\n", sc->xl_unit,
|
|
sc->xl_xcvr);
|
|
/*
|
|
* This will probably be wrong, but it prevents
|
|
* the ifmedia code from panicking.
|
|
*/
|
|
media = IFM_ETHER|IFM_10_T;
|
|
break;
|
|
}
|
|
|
|
if (sc->xl_miibus == NULL)
|
|
ifmedia_set(&sc->ifmedia, media);
|
|
|
|
done:
|
|
|
|
if (sc->xl_flags & XL_FLAG_NO_XCVR_PWR) {
|
|
XL_SEL_WIN(0);
|
|
CSR_WRITE_2(sc, XL_W0_MFG_ID, XL_NO_XCVR_PWR_MAGICBITS);
|
|
}
|
|
|
|
/*
|
|
* Call MI attach routine.
|
|
*/
|
|
ether_ifattach(ifp, eaddr);
|
|
|
|
/* Hook interrupt last to avoid having to lock softc */
|
|
error = bus_setup_intr(dev, sc->xl_irq, INTR_TYPE_NET,
|
|
xl_intr, sc, &sc->xl_intrhand);
|
|
if (error) {
|
|
printf("xl%d: couldn't set up irq\n", unit);
|
|
ether_ifdetach(ifp);
|
|
goto fail;
|
|
}
|
|
|
|
fail:
|
|
if (error)
|
|
xl_detach(dev);
|
|
|
|
return(error);
|
|
}
|
|
|
|
/*
|
|
* Shutdown hardware and free up resources. This can be called any
|
|
* time after the mutex has been initialized. It is called in both
|
|
* the error case in attach and the normal detach case so it needs
|
|
* to be careful about only freeing resources that have actually been
|
|
* allocated.
|
|
*/
|
|
static int
|
|
xl_detach(dev)
|
|
device_t dev;
|
|
{
|
|
struct xl_softc *sc;
|
|
struct ifnet *ifp;
|
|
int rid, res;
|
|
|
|
sc = device_get_softc(dev);
|
|
KASSERT(mtx_initialized(&sc->xl_mtx), ("xl mutex not initialized"));
|
|
XL_LOCK(sc);
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
if (sc->xl_flags & XL_FLAG_USE_MMIO) {
|
|
rid = XL_PCI_LOMEM;
|
|
res = SYS_RES_MEMORY;
|
|
} else {
|
|
rid = XL_PCI_LOIO;
|
|
res = SYS_RES_IOPORT;
|
|
}
|
|
|
|
/* These should only be active if attach succeeded */
|
|
if (device_is_attached(dev)) {
|
|
xl_reset(sc);
|
|
xl_stop(sc);
|
|
ether_ifdetach(ifp);
|
|
}
|
|
if (sc->xl_miibus)
|
|
device_delete_child(dev, sc->xl_miibus);
|
|
bus_generic_detach(dev);
|
|
ifmedia_removeall(&sc->ifmedia);
|
|
|
|
if (sc->xl_intrhand)
|
|
bus_teardown_intr(dev, sc->xl_irq, sc->xl_intrhand);
|
|
if (sc->xl_irq)
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->xl_irq);
|
|
if (sc->xl_fres != NULL)
|
|
bus_release_resource(dev, SYS_RES_MEMORY,
|
|
XL_PCI_FUNCMEM, sc->xl_fres);
|
|
if (sc->xl_res)
|
|
bus_release_resource(dev, res, rid, sc->xl_res);
|
|
|
|
if (sc->xl_mtag) {
|
|
bus_dmamap_destroy(sc->xl_mtag, sc->xl_tmpmap);
|
|
bus_dma_tag_destroy(sc->xl_mtag);
|
|
}
|
|
if (sc->xl_ldata.xl_rx_tag) {
|
|
bus_dmamap_unload(sc->xl_ldata.xl_rx_tag,
|
|
sc->xl_ldata.xl_rx_dmamap);
|
|
bus_dmamem_free(sc->xl_ldata.xl_rx_tag, sc->xl_ldata.xl_rx_list,
|
|
sc->xl_ldata.xl_rx_dmamap);
|
|
bus_dma_tag_destroy(sc->xl_ldata.xl_rx_tag);
|
|
}
|
|
if (sc->xl_ldata.xl_tx_tag) {
|
|
bus_dmamap_unload(sc->xl_ldata.xl_tx_tag,
|
|
sc->xl_ldata.xl_tx_dmamap);
|
|
bus_dmamem_free(sc->xl_ldata.xl_tx_tag, sc->xl_ldata.xl_tx_list,
|
|
sc->xl_ldata.xl_tx_dmamap);
|
|
bus_dma_tag_destroy(sc->xl_ldata.xl_tx_tag);
|
|
}
|
|
|
|
XL_UNLOCK(sc);
|
|
mtx_destroy(&sc->xl_mtx);
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Initialize the transmit descriptors.
|
|
*/
|
|
static int
|
|
xl_list_tx_init(sc)
|
|
struct xl_softc *sc;
|
|
{
|
|
struct xl_chain_data *cd;
|
|
struct xl_list_data *ld;
|
|
int error, i;
|
|
|
|
cd = &sc->xl_cdata;
|
|
ld = &sc->xl_ldata;
|
|
for (i = 0; i < XL_TX_LIST_CNT; i++) {
|
|
cd->xl_tx_chain[i].xl_ptr = &ld->xl_tx_list[i];
|
|
error = bus_dmamap_create(sc->xl_mtag, 0,
|
|
&cd->xl_tx_chain[i].xl_map);
|
|
if (error)
|
|
return(error);
|
|
cd->xl_tx_chain[i].xl_phys = ld->xl_tx_dmaaddr +
|
|
i * sizeof(struct xl_list);
|
|
if (i == (XL_TX_LIST_CNT - 1))
|
|
cd->xl_tx_chain[i].xl_next = NULL;
|
|
else
|
|
cd->xl_tx_chain[i].xl_next = &cd->xl_tx_chain[i + 1];
|
|
}
|
|
|
|
cd->xl_tx_free = &cd->xl_tx_chain[0];
|
|
cd->xl_tx_tail = cd->xl_tx_head = NULL;
|
|
|
|
bus_dmamap_sync(ld->xl_tx_tag, ld->xl_tx_dmamap, BUS_DMASYNC_PREWRITE);
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Initialize the transmit descriptors.
|
|
*/
|
|
static int
|
|
xl_list_tx_init_90xB(sc)
|
|
struct xl_softc *sc;
|
|
{
|
|
struct xl_chain_data *cd;
|
|
struct xl_list_data *ld;
|
|
int error, i;
|
|
|
|
cd = &sc->xl_cdata;
|
|
ld = &sc->xl_ldata;
|
|
for (i = 0; i < XL_TX_LIST_CNT; i++) {
|
|
cd->xl_tx_chain[i].xl_ptr = &ld->xl_tx_list[i];
|
|
error = bus_dmamap_create(sc->xl_mtag, 0,
|
|
&cd->xl_tx_chain[i].xl_map);
|
|
if (error)
|
|
return(error);
|
|
cd->xl_tx_chain[i].xl_phys = ld->xl_tx_dmaaddr +
|
|
i * sizeof(struct xl_list);
|
|
if (i == (XL_TX_LIST_CNT - 1))
|
|
cd->xl_tx_chain[i].xl_next = &cd->xl_tx_chain[0];
|
|
else
|
|
cd->xl_tx_chain[i].xl_next = &cd->xl_tx_chain[i + 1];
|
|
if (i == 0)
|
|
cd->xl_tx_chain[i].xl_prev =
|
|
&cd->xl_tx_chain[XL_TX_LIST_CNT - 1];
|
|
else
|
|
cd->xl_tx_chain[i].xl_prev =
|
|
&cd->xl_tx_chain[i - 1];
|
|
}
|
|
|
|
bzero(ld->xl_tx_list, XL_TX_LIST_SZ);
|
|
ld->xl_tx_list[0].xl_status = htole32(XL_TXSTAT_EMPTY);
|
|
|
|
cd->xl_tx_prod = 1;
|
|
cd->xl_tx_cons = 1;
|
|
cd->xl_tx_cnt = 0;
|
|
|
|
bus_dmamap_sync(ld->xl_tx_tag, ld->xl_tx_dmamap, BUS_DMASYNC_PREWRITE);
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Initialize the RX descriptors and allocate mbufs for them. Note that
|
|
* we arrange the descriptors in a closed ring, so that the last descriptor
|
|
* points back to the first.
|
|
*/
|
|
static int
|
|
xl_list_rx_init(sc)
|
|
struct xl_softc *sc;
|
|
{
|
|
struct xl_chain_data *cd;
|
|
struct xl_list_data *ld;
|
|
int error, i, next;
|
|
u_int32_t nextptr;
|
|
|
|
cd = &sc->xl_cdata;
|
|
ld = &sc->xl_ldata;
|
|
|
|
for (i = 0; i < XL_RX_LIST_CNT; i++) {
|
|
cd->xl_rx_chain[i].xl_ptr = &ld->xl_rx_list[i];
|
|
error = bus_dmamap_create(sc->xl_mtag, 0,
|
|
&cd->xl_rx_chain[i].xl_map);
|
|
if (error)
|
|
return(error);
|
|
error = xl_newbuf(sc, &cd->xl_rx_chain[i]);
|
|
if (error)
|
|
return(error);
|
|
if (i == (XL_RX_LIST_CNT - 1))
|
|
next = 0;
|
|
else
|
|
next = i + 1;
|
|
nextptr = ld->xl_rx_dmaaddr +
|
|
next * sizeof(struct xl_list_onefrag);
|
|
cd->xl_rx_chain[i].xl_next = &cd->xl_rx_chain[next];
|
|
ld->xl_rx_list[i].xl_next = htole32(nextptr);
|
|
}
|
|
|
|
bus_dmamap_sync(ld->xl_rx_tag, ld->xl_rx_dmamap, BUS_DMASYNC_PREWRITE);
|
|
cd->xl_rx_head = &cd->xl_rx_chain[0];
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Initialize an RX descriptor and attach an MBUF cluster.
|
|
* If we fail to do so, we need to leave the old mbuf and
|
|
* the old DMA map untouched so that it can be reused.
|
|
*/
|
|
static int
|
|
xl_newbuf(sc, c)
|
|
struct xl_softc *sc;
|
|
struct xl_chain_onefrag *c;
|
|
{
|
|
struct mbuf *m_new = NULL;
|
|
bus_dmamap_t map;
|
|
int error;
|
|
u_int32_t baddr;
|
|
|
|
m_new = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
|
|
if (m_new == NULL)
|
|
return(ENOBUFS);
|
|
|
|
m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
|
|
|
|
/* Force longword alignment for packet payload. */
|
|
m_adj(m_new, ETHER_ALIGN);
|
|
|
|
error = bus_dmamap_load_mbuf(sc->xl_mtag, sc->xl_tmpmap, m_new,
|
|
xl_dma_map_rxbuf, &baddr, BUS_DMA_NOWAIT);
|
|
if (error) {
|
|
m_freem(m_new);
|
|
printf("xl%d: can't map mbuf (error %d)\n", sc->xl_unit, error);
|
|
return(error);
|
|
}
|
|
|
|
bus_dmamap_unload(sc->xl_mtag, c->xl_map);
|
|
map = c->xl_map;
|
|
c->xl_map = sc->xl_tmpmap;
|
|
sc->xl_tmpmap = map;
|
|
c->xl_mbuf = m_new;
|
|
c->xl_ptr->xl_frag.xl_len = htole32(m_new->m_len | XL_LAST_FRAG);
|
|
c->xl_ptr->xl_status = 0;
|
|
c->xl_ptr->xl_frag.xl_addr = htole32(baddr);
|
|
bus_dmamap_sync(sc->xl_mtag, c->xl_map, BUS_DMASYNC_PREREAD);
|
|
return(0);
|
|
}
|
|
|
|
static int
|
|
xl_rx_resync(sc)
|
|
struct xl_softc *sc;
|
|
{
|
|
struct xl_chain_onefrag *pos;
|
|
int i;
|
|
|
|
pos = sc->xl_cdata.xl_rx_head;
|
|
|
|
for (i = 0; i < XL_RX_LIST_CNT; i++) {
|
|
if (pos->xl_ptr->xl_status)
|
|
break;
|
|
pos = pos->xl_next;
|
|
}
|
|
|
|
if (i == XL_RX_LIST_CNT)
|
|
return(0);
|
|
|
|
sc->xl_cdata.xl_rx_head = pos;
|
|
|
|
return(EAGAIN);
|
|
}
|
|
|
|
/*
|
|
* A frame has been uploaded: pass the resulting mbuf chain up to
|
|
* the higher level protocols.
|
|
*/
|
|
static void
|
|
xl_rxeof(sc)
|
|
struct xl_softc *sc;
|
|
{
|
|
struct mbuf *m;
|
|
struct ifnet *ifp;
|
|
struct xl_chain_onefrag *cur_rx;
|
|
int total_len = 0;
|
|
u_int32_t rxstat;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
again:
|
|
|
|
bus_dmamap_sync(sc->xl_ldata.xl_rx_tag, sc->xl_ldata.xl_rx_dmamap,
|
|
BUS_DMASYNC_POSTREAD);
|
|
while((rxstat = le32toh(sc->xl_cdata.xl_rx_head->xl_ptr->xl_status))) {
|
|
cur_rx = sc->xl_cdata.xl_rx_head;
|
|
sc->xl_cdata.xl_rx_head = cur_rx->xl_next;
|
|
total_len = rxstat & XL_RXSTAT_LENMASK;
|
|
|
|
/*
|
|
* Since we have told the chip to allow large frames,
|
|
* we need to trap giant frame errors in software. We allow
|
|
* a little more than the normal frame size to account for
|
|
* frames with VLAN tags.
|
|
*/
|
|
if (total_len > XL_MAX_FRAMELEN)
|
|
rxstat |= (XL_RXSTAT_UP_ERROR|XL_RXSTAT_OVERSIZE);
|
|
|
|
/*
|
|
* If an error occurs, update stats, clear the
|
|
* status word and leave the mbuf cluster in place:
|
|
* it should simply get re-used next time this descriptor
|
|
* comes up in the ring.
|
|
*/
|
|
if (rxstat & XL_RXSTAT_UP_ERROR) {
|
|
ifp->if_ierrors++;
|
|
cur_rx->xl_ptr->xl_status = 0;
|
|
bus_dmamap_sync(sc->xl_ldata.xl_rx_tag,
|
|
sc->xl_ldata.xl_rx_dmamap, BUS_DMASYNC_PREWRITE);
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* If the error bit was not set, the upload complete
|
|
* bit should be set which means we have a valid packet.
|
|
* If not, something truly strange has happened.
|
|
*/
|
|
if (!(rxstat & XL_RXSTAT_UP_CMPLT)) {
|
|
printf("xl%d: bad receive status -- "
|
|
"packet dropped\n", sc->xl_unit);
|
|
ifp->if_ierrors++;
|
|
cur_rx->xl_ptr->xl_status = 0;
|
|
bus_dmamap_sync(sc->xl_ldata.xl_rx_tag,
|
|
sc->xl_ldata.xl_rx_dmamap, BUS_DMASYNC_PREWRITE);
|
|
continue;
|
|
}
|
|
|
|
/* No errors; receive the packet. */
|
|
bus_dmamap_sync(sc->xl_mtag, cur_rx->xl_map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
m = cur_rx->xl_mbuf;
|
|
|
|
/*
|
|
* Try to conjure up a new mbuf cluster. If that
|
|
* fails, it means we have an out of memory condition and
|
|
* should leave the buffer in place and continue. This will
|
|
* result in a lost packet, but there's little else we
|
|
* can do in this situation.
|
|
*/
|
|
if (xl_newbuf(sc, cur_rx)) {
|
|
ifp->if_ierrors++;
|
|
cur_rx->xl_ptr->xl_status = 0;
|
|
bus_dmamap_sync(sc->xl_ldata.xl_rx_tag,
|
|
sc->xl_ldata.xl_rx_dmamap, BUS_DMASYNC_PREWRITE);
|
|
continue;
|
|
}
|
|
bus_dmamap_sync(sc->xl_ldata.xl_rx_tag,
|
|
sc->xl_ldata.xl_rx_dmamap, BUS_DMASYNC_PREWRITE);
|
|
|
|
ifp->if_ipackets++;
|
|
m->m_pkthdr.rcvif = ifp;
|
|
m->m_pkthdr.len = m->m_len = total_len;
|
|
|
|
if (ifp->if_capenable & IFCAP_RXCSUM) {
|
|
/* Do IP checksum checking. */
|
|
if (rxstat & XL_RXSTAT_IPCKOK)
|
|
m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED;
|
|
if (!(rxstat & XL_RXSTAT_IPCKERR))
|
|
m->m_pkthdr.csum_flags |= CSUM_IP_VALID;
|
|
if ((rxstat & XL_RXSTAT_TCPCOK &&
|
|
!(rxstat & XL_RXSTAT_TCPCKERR)) ||
|
|
(rxstat & XL_RXSTAT_UDPCKOK &&
|
|
!(rxstat & XL_RXSTAT_UDPCKERR))) {
|
|
m->m_pkthdr.csum_flags |=
|
|
CSUM_DATA_VALID|CSUM_PSEUDO_HDR;
|
|
m->m_pkthdr.csum_data = 0xffff;
|
|
}
|
|
}
|
|
|
|
(*ifp->if_input)(ifp, m);
|
|
}
|
|
|
|
/*
|
|
* Handle the 'end of channel' condition. When the upload
|
|
* engine hits the end of the RX ring, it will stall. This
|
|
* is our cue to flush the RX ring, reload the uplist pointer
|
|
* register and unstall the engine.
|
|
* XXX This is actually a little goofy. With the ThunderLAN
|
|
* chip, you get an interrupt when the receiver hits the end
|
|
* of the receive ring, which tells you exactly when you
|
|
* you need to reload the ring pointer. Here we have to
|
|
* fake it. I'm mad at myself for not being clever enough
|
|
* to avoid the use of a goto here.
|
|
*/
|
|
if (CSR_READ_4(sc, XL_UPLIST_PTR) == 0 ||
|
|
CSR_READ_4(sc, XL_UPLIST_STATUS) & XL_PKTSTAT_UP_STALLED) {
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_UP_STALL);
|
|
xl_wait(sc);
|
|
CSR_WRITE_4(sc, XL_UPLIST_PTR, sc->xl_ldata.xl_rx_dmaaddr);
|
|
sc->xl_cdata.xl_rx_head = &sc->xl_cdata.xl_rx_chain[0];
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_UP_UNSTALL);
|
|
goto again;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* A frame was downloaded to the chip. It's safe for us to clean up
|
|
* the list buffers.
|
|
*/
|
|
static void
|
|
xl_txeof(sc)
|
|
struct xl_softc *sc;
|
|
{
|
|
struct xl_chain *cur_tx;
|
|
struct ifnet *ifp;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
/* Clear the timeout timer. */
|
|
ifp->if_timer = 0;
|
|
|
|
/*
|
|
* Go through our tx list and free mbufs for those
|
|
* frames that have been uploaded. Note: the 3c905B
|
|
* sets a special bit in the status word to let us
|
|
* know that a frame has been downloaded, but the
|
|
* original 3c900/3c905 adapters don't do that.
|
|
* Consequently, we have to use a different test if
|
|
* xl_type != XL_TYPE_905B.
|
|
*/
|
|
while(sc->xl_cdata.xl_tx_head != NULL) {
|
|
cur_tx = sc->xl_cdata.xl_tx_head;
|
|
|
|
if (CSR_READ_4(sc, XL_DOWNLIST_PTR))
|
|
break;
|
|
|
|
sc->xl_cdata.xl_tx_head = cur_tx->xl_next;
|
|
bus_dmamap_sync(sc->xl_mtag, cur_tx->xl_map,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(sc->xl_mtag, cur_tx->xl_map);
|
|
m_freem(cur_tx->xl_mbuf);
|
|
cur_tx->xl_mbuf = NULL;
|
|
ifp->if_opackets++;
|
|
|
|
cur_tx->xl_next = sc->xl_cdata.xl_tx_free;
|
|
sc->xl_cdata.xl_tx_free = cur_tx;
|
|
}
|
|
|
|
if (sc->xl_cdata.xl_tx_head == NULL) {
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
sc->xl_cdata.xl_tx_tail = NULL;
|
|
} else {
|
|
if (CSR_READ_4(sc, XL_DMACTL) & XL_DMACTL_DOWN_STALLED ||
|
|
!CSR_READ_4(sc, XL_DOWNLIST_PTR)) {
|
|
CSR_WRITE_4(sc, XL_DOWNLIST_PTR,
|
|
sc->xl_cdata.xl_tx_head->xl_phys);
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_DOWN_UNSTALL);
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
xl_txeof_90xB(sc)
|
|
struct xl_softc *sc;
|
|
{
|
|
struct xl_chain *cur_tx = NULL;
|
|
struct ifnet *ifp;
|
|
int idx;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
bus_dmamap_sync(sc->xl_ldata.xl_tx_tag, sc->xl_ldata.xl_tx_dmamap,
|
|
BUS_DMASYNC_POSTREAD);
|
|
idx = sc->xl_cdata.xl_tx_cons;
|
|
while(idx != sc->xl_cdata.xl_tx_prod) {
|
|
|
|
cur_tx = &sc->xl_cdata.xl_tx_chain[idx];
|
|
|
|
if (!(le32toh(cur_tx->xl_ptr->xl_status) &
|
|
XL_TXSTAT_DL_COMPLETE))
|
|
break;
|
|
|
|
if (cur_tx->xl_mbuf != NULL) {
|
|
bus_dmamap_sync(sc->xl_mtag, cur_tx->xl_map,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(sc->xl_mtag, cur_tx->xl_map);
|
|
m_freem(cur_tx->xl_mbuf);
|
|
cur_tx->xl_mbuf = NULL;
|
|
}
|
|
|
|
ifp->if_opackets++;
|
|
|
|
sc->xl_cdata.xl_tx_cnt--;
|
|
XL_INC(idx, XL_TX_LIST_CNT);
|
|
ifp->if_timer = 0;
|
|
}
|
|
|
|
sc->xl_cdata.xl_tx_cons = idx;
|
|
|
|
if (cur_tx != NULL)
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* TX 'end of channel' interrupt handler. Actually, we should
|
|
* only get a 'TX complete' interrupt if there's a transmit error,
|
|
* so this is really TX error handler.
|
|
*/
|
|
static void
|
|
xl_txeoc(sc)
|
|
struct xl_softc *sc;
|
|
{
|
|
u_int8_t txstat;
|
|
|
|
while((txstat = CSR_READ_1(sc, XL_TX_STATUS))) {
|
|
if (txstat & XL_TXSTATUS_UNDERRUN ||
|
|
txstat & XL_TXSTATUS_JABBER ||
|
|
txstat & XL_TXSTATUS_RECLAIM) {
|
|
printf("xl%d: transmission error: %x\n",
|
|
sc->xl_unit, txstat);
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_RESET);
|
|
xl_wait(sc);
|
|
if (sc->xl_type == XL_TYPE_905B) {
|
|
if (sc->xl_cdata.xl_tx_cnt) {
|
|
int i;
|
|
struct xl_chain *c;
|
|
i = sc->xl_cdata.xl_tx_cons;
|
|
c = &sc->xl_cdata.xl_tx_chain[i];
|
|
CSR_WRITE_4(sc, XL_DOWNLIST_PTR,
|
|
c->xl_phys);
|
|
CSR_WRITE_1(sc, XL_DOWN_POLL, 64);
|
|
}
|
|
} else {
|
|
if (sc->xl_cdata.xl_tx_head != NULL)
|
|
CSR_WRITE_4(sc, XL_DOWNLIST_PTR,
|
|
sc->xl_cdata.xl_tx_head->xl_phys);
|
|
}
|
|
/*
|
|
* Remember to set this for the
|
|
* first generation 3c90X chips.
|
|
*/
|
|
CSR_WRITE_1(sc, XL_TX_FREETHRESH, XL_PACKET_SIZE >> 8);
|
|
if (txstat & XL_TXSTATUS_UNDERRUN &&
|
|
sc->xl_tx_thresh < XL_PACKET_SIZE) {
|
|
sc->xl_tx_thresh += XL_MIN_FRAMELEN;
|
|
printf("xl%d: tx underrun, increasing tx start"
|
|
" threshold to %d bytes\n", sc->xl_unit,
|
|
sc->xl_tx_thresh);
|
|
}
|
|
CSR_WRITE_2(sc, XL_COMMAND,
|
|
XL_CMD_TX_SET_START|sc->xl_tx_thresh);
|
|
if (sc->xl_type == XL_TYPE_905B) {
|
|
CSR_WRITE_2(sc, XL_COMMAND,
|
|
XL_CMD_SET_TX_RECLAIM|(XL_PACKET_SIZE >> 4));
|
|
}
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_ENABLE);
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_DOWN_UNSTALL);
|
|
} else {
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_ENABLE);
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_DOWN_UNSTALL);
|
|
}
|
|
/*
|
|
* Write an arbitrary byte to the TX_STATUS register
|
|
* to clear this interrupt/error and advance to the next.
|
|
*/
|
|
CSR_WRITE_1(sc, XL_TX_STATUS, 0x01);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
xl_intr(arg)
|
|
void *arg;
|
|
{
|
|
struct xl_softc *sc;
|
|
struct ifnet *ifp;
|
|
u_int16_t status;
|
|
|
|
sc = arg;
|
|
XL_LOCK(sc);
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
while((status = CSR_READ_2(sc, XL_STATUS)) & XL_INTRS && status != 0xFFFF) {
|
|
|
|
CSR_WRITE_2(sc, XL_COMMAND,
|
|
XL_CMD_INTR_ACK|(status & XL_INTRS));
|
|
|
|
if (status & XL_STAT_UP_COMPLETE) {
|
|
int curpkts;
|
|
|
|
curpkts = ifp->if_ipackets;
|
|
xl_rxeof(sc);
|
|
if (curpkts == ifp->if_ipackets) {
|
|
while (xl_rx_resync(sc))
|
|
xl_rxeof(sc);
|
|
}
|
|
}
|
|
|
|
if (status & XL_STAT_DOWN_COMPLETE) {
|
|
if (sc->xl_type == XL_TYPE_905B)
|
|
xl_txeof_90xB(sc);
|
|
else
|
|
xl_txeof(sc);
|
|
}
|
|
|
|
if (status & XL_STAT_TX_COMPLETE) {
|
|
ifp->if_oerrors++;
|
|
xl_txeoc(sc);
|
|
}
|
|
|
|
if (status & XL_STAT_ADFAIL) {
|
|
xl_reset(sc);
|
|
xl_init(sc);
|
|
}
|
|
|
|
if (status & XL_STAT_STATSOFLOW) {
|
|
sc->xl_stats_no_timeout = 1;
|
|
xl_stats_update(sc);
|
|
sc->xl_stats_no_timeout = 0;
|
|
}
|
|
}
|
|
|
|
if (ifp->if_snd.ifq_head != NULL)
|
|
(*ifp->if_start)(ifp);
|
|
|
|
XL_UNLOCK(sc);
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
xl_stats_update(xsc)
|
|
void *xsc;
|
|
{
|
|
struct xl_softc *sc;
|
|
struct ifnet *ifp;
|
|
struct xl_stats xl_stats;
|
|
u_int8_t *p;
|
|
int i;
|
|
struct mii_data *mii = NULL;
|
|
|
|
bzero((char *)&xl_stats, sizeof(struct xl_stats));
|
|
|
|
sc = xsc;
|
|
ifp = &sc->arpcom.ac_if;
|
|
if (sc->xl_miibus != NULL)
|
|
mii = device_get_softc(sc->xl_miibus);
|
|
|
|
p = (u_int8_t *)&xl_stats;
|
|
|
|
/* Read all the stats registers. */
|
|
XL_SEL_WIN(6);
|
|
|
|
for (i = 0; i < 16; i++)
|
|
*p++ = CSR_READ_1(sc, XL_W6_CARRIER_LOST + i);
|
|
|
|
ifp->if_ierrors += xl_stats.xl_rx_overrun;
|
|
|
|
ifp->if_collisions += xl_stats.xl_tx_multi_collision +
|
|
xl_stats.xl_tx_single_collision +
|
|
xl_stats.xl_tx_late_collision;
|
|
|
|
/*
|
|
* Boomerang and cyclone chips have an extra stats counter
|
|
* in window 4 (BadSSD). We have to read this too in order
|
|
* to clear out all the stats registers and avoid a statsoflow
|
|
* interrupt.
|
|
*/
|
|
XL_SEL_WIN(4);
|
|
CSR_READ_1(sc, XL_W4_BADSSD);
|
|
|
|
if ((mii != NULL) && (!sc->xl_stats_no_timeout))
|
|
mii_tick(mii);
|
|
|
|
XL_SEL_WIN(7);
|
|
|
|
if (!sc->xl_stats_no_timeout)
|
|
sc->xl_stat_ch = timeout(xl_stats_update, sc, hz);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Encapsulate an mbuf chain in a descriptor by coupling the mbuf data
|
|
* pointers to the fragment pointers.
|
|
*/
|
|
static int
|
|
xl_encap(sc, c, m_head)
|
|
struct xl_softc *sc;
|
|
struct xl_chain *c;
|
|
struct mbuf *m_head;
|
|
{
|
|
int error;
|
|
u_int32_t status;
|
|
struct ifnet *ifp;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
/*
|
|
* Start packing the mbufs in this chain into
|
|
* the fragment pointers. Stop when we run out
|
|
* of fragments or hit the end of the mbuf chain.
|
|
*/
|
|
error = bus_dmamap_load_mbuf(sc->xl_mtag, c->xl_map, m_head,
|
|
xl_dma_map_txbuf, c->xl_ptr, BUS_DMA_NOWAIT);
|
|
|
|
if (error && error != EFBIG) {
|
|
m_freem(m_head);
|
|
printf("xl%d: can't map mbuf (error %d)\n", sc->xl_unit, error);
|
|
return(1);
|
|
}
|
|
|
|
/*
|
|
* Handle special case: we used up all 63 fragments,
|
|
* but we have more mbufs left in the chain. Copy the
|
|
* data into an mbuf cluster. Note that we don't
|
|
* bother clearing the values in the other fragment
|
|
* pointers/counters; it wouldn't gain us anything,
|
|
* and would waste cycles.
|
|
*/
|
|
if (error) {
|
|
struct mbuf *m_new;
|
|
|
|
m_new = m_defrag(m_head, M_DONTWAIT);
|
|
if (m_new == NULL) {
|
|
m_freem(m_head);
|
|
return(1);
|
|
} else {
|
|
m_head = m_new;
|
|
}
|
|
|
|
error = bus_dmamap_load_mbuf(sc->xl_mtag, c->xl_map,
|
|
m_head, xl_dma_map_txbuf, c->xl_ptr, BUS_DMA_NOWAIT);
|
|
if (error) {
|
|
m_freem(m_head);
|
|
printf("xl%d: can't map mbuf (error %d)\n",
|
|
sc->xl_unit, error);
|
|
return(1);
|
|
}
|
|
}
|
|
|
|
if (sc->xl_type == XL_TYPE_905B) {
|
|
status = XL_TXSTAT_RND_DEFEAT;
|
|
|
|
if (m_head->m_pkthdr.csum_flags) {
|
|
if (m_head->m_pkthdr.csum_flags & CSUM_IP)
|
|
status |= XL_TXSTAT_IPCKSUM;
|
|
if (m_head->m_pkthdr.csum_flags & CSUM_TCP)
|
|
status |= XL_TXSTAT_TCPCKSUM;
|
|
if (m_head->m_pkthdr.csum_flags & CSUM_UDP)
|
|
status |= XL_TXSTAT_UDPCKSUM;
|
|
}
|
|
c->xl_ptr->xl_status = htole32(status);
|
|
}
|
|
|
|
c->xl_mbuf = m_head;
|
|
bus_dmamap_sync(sc->xl_mtag, c->xl_map, BUS_DMASYNC_PREWRITE);
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Main transmit routine. To avoid having to do mbuf copies, we put pointers
|
|
* to the mbuf data regions directly in the transmit lists. We also save a
|
|
* copy of the pointers since the transmit list fragment pointers are
|
|
* physical addresses.
|
|
*/
|
|
static void
|
|
xl_start(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct xl_softc *sc;
|
|
struct mbuf *m_head = NULL;
|
|
struct xl_chain *prev = NULL, *cur_tx = NULL, *start_tx;
|
|
struct xl_chain *prev_tx;
|
|
u_int32_t status;
|
|
int error;
|
|
|
|
sc = ifp->if_softc;
|
|
XL_LOCK(sc);
|
|
/*
|
|
* Check for an available queue slot. If there are none,
|
|
* punt.
|
|
*/
|
|
if (sc->xl_cdata.xl_tx_free == NULL) {
|
|
xl_txeoc(sc);
|
|
xl_txeof(sc);
|
|
if (sc->xl_cdata.xl_tx_free == NULL) {
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
XL_UNLOCK(sc);
|
|
return;
|
|
}
|
|
}
|
|
|
|
start_tx = sc->xl_cdata.xl_tx_free;
|
|
|
|
while(sc->xl_cdata.xl_tx_free != NULL) {
|
|
IF_DEQUEUE(&ifp->if_snd, m_head);
|
|
if (m_head == NULL)
|
|
break;
|
|
|
|
/* Pick a descriptor off the free list. */
|
|
prev_tx = cur_tx;
|
|
cur_tx = sc->xl_cdata.xl_tx_free;
|
|
|
|
/* Pack the data into the descriptor. */
|
|
error = xl_encap(sc, cur_tx, m_head);
|
|
if (error) {
|
|
cur_tx = prev_tx;
|
|
continue;
|
|
}
|
|
|
|
sc->xl_cdata.xl_tx_free = cur_tx->xl_next;
|
|
cur_tx->xl_next = NULL;
|
|
|
|
/* Chain it together. */
|
|
if (prev != NULL) {
|
|
prev->xl_next = cur_tx;
|
|
prev->xl_ptr->xl_next = htole32(cur_tx->xl_phys);
|
|
}
|
|
prev = cur_tx;
|
|
|
|
/*
|
|
* If there's a BPF listener, bounce a copy of this frame
|
|
* to him.
|
|
*/
|
|
BPF_MTAP(ifp, cur_tx->xl_mbuf);
|
|
}
|
|
|
|
/*
|
|
* If there are no packets queued, bail.
|
|
*/
|
|
if (cur_tx == NULL) {
|
|
XL_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Place the request for the upload interrupt
|
|
* in the last descriptor in the chain. This way, if
|
|
* we're chaining several packets at once, we'll only
|
|
* get an interupt once for the whole chain rather than
|
|
* once for each packet.
|
|
*/
|
|
cur_tx->xl_ptr->xl_status = htole32(le32toh(cur_tx->xl_ptr->xl_status) |
|
|
XL_TXSTAT_DL_INTR);
|
|
bus_dmamap_sync(sc->xl_ldata.xl_tx_tag, sc->xl_ldata.xl_tx_dmamap,
|
|
BUS_DMASYNC_PREWRITE);
|
|
|
|
/*
|
|
* Queue the packets. If the TX channel is clear, update
|
|
* the downlist pointer register.
|
|
*/
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_DOWN_STALL);
|
|
xl_wait(sc);
|
|
|
|
if (sc->xl_cdata.xl_tx_head != NULL) {
|
|
sc->xl_cdata.xl_tx_tail->xl_next = start_tx;
|
|
sc->xl_cdata.xl_tx_tail->xl_ptr->xl_next =
|
|
htole32(start_tx->xl_phys);
|
|
status = sc->xl_cdata.xl_tx_tail->xl_ptr->xl_status;
|
|
sc->xl_cdata.xl_tx_tail->xl_ptr->xl_status =
|
|
htole32(le32toh(status) & ~XL_TXSTAT_DL_INTR);
|
|
sc->xl_cdata.xl_tx_tail = cur_tx;
|
|
} else {
|
|
sc->xl_cdata.xl_tx_head = start_tx;
|
|
sc->xl_cdata.xl_tx_tail = cur_tx;
|
|
}
|
|
if (!CSR_READ_4(sc, XL_DOWNLIST_PTR))
|
|
CSR_WRITE_4(sc, XL_DOWNLIST_PTR, start_tx->xl_phys);
|
|
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_DOWN_UNSTALL);
|
|
|
|
XL_SEL_WIN(7);
|
|
|
|
/*
|
|
* Set a timeout in case the chip goes out to lunch.
|
|
*/
|
|
ifp->if_timer = 5;
|
|
|
|
/*
|
|
* XXX Under certain conditions, usually on slower machines
|
|
* where interrupts may be dropped, it's possible for the
|
|
* adapter to chew up all the buffers in the receive ring
|
|
* and stall, without us being able to do anything about it.
|
|
* To guard against this, we need to make a pass over the
|
|
* RX queue to make sure there aren't any packets pending.
|
|
* Doing it here means we can flush the receive ring at the
|
|
* same time the chip is DMAing the transmit descriptors we
|
|
* just gave it.
|
|
*
|
|
* 3Com goes to some lengths to emphasize the Parallel Tasking (tm)
|
|
* nature of their chips in all their marketing literature;
|
|
* we may as well take advantage of it. :)
|
|
*/
|
|
xl_rxeof(sc);
|
|
|
|
XL_UNLOCK(sc);
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
xl_start_90xB(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct xl_softc *sc;
|
|
struct mbuf *m_head = NULL;
|
|
struct xl_chain *prev = NULL, *cur_tx = NULL, *start_tx;
|
|
struct xl_chain *prev_tx;
|
|
int error, idx;
|
|
|
|
sc = ifp->if_softc;
|
|
XL_LOCK(sc);
|
|
|
|
if (ifp->if_flags & IFF_OACTIVE) {
|
|
XL_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
idx = sc->xl_cdata.xl_tx_prod;
|
|
start_tx = &sc->xl_cdata.xl_tx_chain[idx];
|
|
|
|
while (sc->xl_cdata.xl_tx_chain[idx].xl_mbuf == NULL) {
|
|
|
|
if ((XL_TX_LIST_CNT - sc->xl_cdata.xl_tx_cnt) < 3) {
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
break;
|
|
}
|
|
|
|
IF_DEQUEUE(&ifp->if_snd, m_head);
|
|
if (m_head == NULL)
|
|
break;
|
|
|
|
prev_tx = cur_tx;
|
|
cur_tx = &sc->xl_cdata.xl_tx_chain[idx];
|
|
|
|
/* Pack the data into the descriptor. */
|
|
error = xl_encap(sc, cur_tx, m_head);
|
|
if (error) {
|
|
cur_tx = prev_tx;
|
|
continue;
|
|
}
|
|
|
|
/* Chain it together. */
|
|
if (prev != NULL)
|
|
prev->xl_ptr->xl_next = htole32(cur_tx->xl_phys);
|
|
prev = cur_tx;
|
|
|
|
/*
|
|
* If there's a BPF listener, bounce a copy of this frame
|
|
* to him.
|
|
*/
|
|
BPF_MTAP(ifp, cur_tx->xl_mbuf);
|
|
|
|
XL_INC(idx, XL_TX_LIST_CNT);
|
|
sc->xl_cdata.xl_tx_cnt++;
|
|
}
|
|
|
|
/*
|
|
* If there are no packets queued, bail.
|
|
*/
|
|
if (cur_tx == NULL) {
|
|
XL_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Place the request for the upload interrupt
|
|
* in the last descriptor in the chain. This way, if
|
|
* we're chaining several packets at once, we'll only
|
|
* get an interupt once for the whole chain rather than
|
|
* once for each packet.
|
|
*/
|
|
cur_tx->xl_ptr->xl_status = htole32(le32toh(cur_tx->xl_ptr->xl_status) |
|
|
XL_TXSTAT_DL_INTR);
|
|
bus_dmamap_sync(sc->xl_ldata.xl_tx_tag, sc->xl_ldata.xl_tx_dmamap,
|
|
BUS_DMASYNC_PREWRITE);
|
|
|
|
/* Start transmission */
|
|
sc->xl_cdata.xl_tx_prod = idx;
|
|
start_tx->xl_prev->xl_ptr->xl_next = htole32(start_tx->xl_phys);
|
|
|
|
/*
|
|
* Set a timeout in case the chip goes out to lunch.
|
|
*/
|
|
ifp->if_timer = 5;
|
|
|
|
XL_UNLOCK(sc);
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
xl_init(xsc)
|
|
void *xsc;
|
|
{
|
|
struct xl_softc *sc = xsc;
|
|
struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
int error, i;
|
|
u_int16_t rxfilt = 0;
|
|
struct mii_data *mii = NULL;
|
|
|
|
XL_LOCK(sc);
|
|
|
|
/*
|
|
* Cancel pending I/O and free all RX/TX buffers.
|
|
*/
|
|
xl_stop(sc);
|
|
|
|
if (sc->xl_miibus == NULL) {
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_RESET);
|
|
xl_wait(sc);
|
|
}
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_RESET);
|
|
xl_wait(sc);
|
|
DELAY(10000);
|
|
|
|
if (sc->xl_miibus != NULL)
|
|
mii = device_get_softc(sc->xl_miibus);
|
|
|
|
/* Init our MAC address */
|
|
XL_SEL_WIN(2);
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++) {
|
|
CSR_WRITE_1(sc, XL_W2_STATION_ADDR_LO + i,
|
|
sc->arpcom.ac_enaddr[i]);
|
|
}
|
|
|
|
/* Clear the station mask. */
|
|
for (i = 0; i < 3; i++)
|
|
CSR_WRITE_2(sc, XL_W2_STATION_MASK_LO + (i * 2), 0);
|
|
#ifdef notdef
|
|
/* Reset TX and RX. */
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_RESET);
|
|
xl_wait(sc);
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_RESET);
|
|
xl_wait(sc);
|
|
#endif
|
|
/* Init circular RX list. */
|
|
error = xl_list_rx_init(sc);
|
|
if (error) {
|
|
printf("xl%d: initialization of the rx ring failed (%d)\n",
|
|
sc->xl_unit, error);
|
|
xl_stop(sc);
|
|
XL_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
/* Init TX descriptors. */
|
|
if (sc->xl_type == XL_TYPE_905B)
|
|
error = xl_list_tx_init_90xB(sc);
|
|
else
|
|
error = xl_list_tx_init(sc);
|
|
if (error) {
|
|
printf("xl%d: initialization of the tx ring failed (%d)\n",
|
|
sc->xl_unit, error);
|
|
xl_stop(sc);
|
|
XL_UNLOCK(sc);
|
|
}
|
|
|
|
/*
|
|
* Set the TX freethresh value.
|
|
* Note that this has no effect on 3c905B "cyclone"
|
|
* cards but is required for 3c900/3c905 "boomerang"
|
|
* cards in order to enable the download engine.
|
|
*/
|
|
CSR_WRITE_1(sc, XL_TX_FREETHRESH, XL_PACKET_SIZE >> 8);
|
|
|
|
/* Set the TX start threshold for best performance. */
|
|
sc->xl_tx_thresh = XL_MIN_FRAMELEN;
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_SET_START|sc->xl_tx_thresh);
|
|
|
|
/*
|
|
* If this is a 3c905B, also set the tx reclaim threshold.
|
|
* This helps cut down on the number of tx reclaim errors
|
|
* that could happen on a busy network. The chip multiplies
|
|
* the register value by 16 to obtain the actual threshold
|
|
* in bytes, so we divide by 16 when setting the value here.
|
|
* The existing threshold value can be examined by reading
|
|
* the register at offset 9 in window 5.
|
|
*/
|
|
if (sc->xl_type == XL_TYPE_905B) {
|
|
CSR_WRITE_2(sc, XL_COMMAND,
|
|
XL_CMD_SET_TX_RECLAIM|(XL_PACKET_SIZE >> 4));
|
|
}
|
|
|
|
/* Set RX filter bits. */
|
|
XL_SEL_WIN(5);
|
|
rxfilt = CSR_READ_1(sc, XL_W5_RX_FILTER);
|
|
|
|
/* Set the individual bit to receive frames for this host only. */
|
|
rxfilt |= XL_RXFILTER_INDIVIDUAL;
|
|
|
|
/* If we want promiscuous mode, set the allframes bit. */
|
|
if (ifp->if_flags & IFF_PROMISC) {
|
|
rxfilt |= XL_RXFILTER_ALLFRAMES;
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_SET_FILT|rxfilt);
|
|
} else {
|
|
rxfilt &= ~XL_RXFILTER_ALLFRAMES;
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_SET_FILT|rxfilt);
|
|
}
|
|
|
|
/*
|
|
* Set capture broadcast bit to capture broadcast frames.
|
|
*/
|
|
if (ifp->if_flags & IFF_BROADCAST) {
|
|
rxfilt |= XL_RXFILTER_BROADCAST;
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_SET_FILT|rxfilt);
|
|
} else {
|
|
rxfilt &= ~XL_RXFILTER_BROADCAST;
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_SET_FILT|rxfilt);
|
|
}
|
|
|
|
/*
|
|
* Program the multicast filter, if necessary.
|
|
*/
|
|
if (sc->xl_type == XL_TYPE_905B)
|
|
xl_setmulti_hash(sc);
|
|
else
|
|
xl_setmulti(sc);
|
|
|
|
/*
|
|
* Load the address of the RX list. We have to
|
|
* stall the upload engine before we can manipulate
|
|
* the uplist pointer register, then unstall it when
|
|
* we're finished. We also have to wait for the
|
|
* stall command to complete before proceeding.
|
|
* Note that we have to do this after any RX resets
|
|
* have completed since the uplist register is cleared
|
|
* by a reset.
|
|
*/
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_UP_STALL);
|
|
xl_wait(sc);
|
|
CSR_WRITE_4(sc, XL_UPLIST_PTR, sc->xl_ldata.xl_rx_dmaaddr);
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_UP_UNSTALL);
|
|
xl_wait(sc);
|
|
|
|
|
|
if (sc->xl_type == XL_TYPE_905B) {
|
|
/* Set polling interval */
|
|
CSR_WRITE_1(sc, XL_DOWN_POLL, 64);
|
|
/* Load the address of the TX list */
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_DOWN_STALL);
|
|
xl_wait(sc);
|
|
CSR_WRITE_4(sc, XL_DOWNLIST_PTR,
|
|
sc->xl_cdata.xl_tx_chain[0].xl_phys);
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_DOWN_UNSTALL);
|
|
xl_wait(sc);
|
|
}
|
|
|
|
/*
|
|
* If the coax transceiver is on, make sure to enable
|
|
* the DC-DC converter.
|
|
*/
|
|
XL_SEL_WIN(3);
|
|
if (sc->xl_xcvr == XL_XCVR_COAX)
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_COAX_START);
|
|
else
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_COAX_STOP);
|
|
|
|
/*
|
|
* increase packet size to allow reception of 802.1q or ISL packets.
|
|
* For the 3c90x chip, set the 'allow large packets' bit in the MAC
|
|
* control register. For 3c90xB/C chips, use the RX packet size
|
|
* register.
|
|
*/
|
|
|
|
if (sc->xl_type == XL_TYPE_905B)
|
|
CSR_WRITE_2(sc, XL_W3_MAXPKTSIZE, XL_PACKET_SIZE);
|
|
else {
|
|
u_int8_t macctl;
|
|
macctl = CSR_READ_1(sc, XL_W3_MAC_CTRL);
|
|
macctl |= XL_MACCTRL_ALLOW_LARGE_PACK;
|
|
CSR_WRITE_1(sc, XL_W3_MAC_CTRL, macctl);
|
|
}
|
|
|
|
/* Clear out the stats counters. */
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_STATS_DISABLE);
|
|
sc->xl_stats_no_timeout = 1;
|
|
xl_stats_update(sc);
|
|
sc->xl_stats_no_timeout = 0;
|
|
XL_SEL_WIN(4);
|
|
CSR_WRITE_2(sc, XL_W4_NET_DIAG, XL_NETDIAG_UPPER_BYTES_ENABLE);
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_STATS_ENABLE);
|
|
|
|
/*
|
|
* Enable interrupts.
|
|
*/
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_INTR_ACK|0xFF);
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_STAT_ENB|XL_INTRS);
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_INTR_ENB|XL_INTRS);
|
|
if (sc->xl_flags & XL_FLAG_FUNCREG)
|
|
bus_space_write_4(sc->xl_ftag, sc->xl_fhandle, 4, 0x8000);
|
|
|
|
/* Set the RX early threshold */
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_SET_THRESH|(XL_PACKET_SIZE >>2));
|
|
CSR_WRITE_2(sc, XL_DMACTL, XL_DMACTL_UP_RX_EARLY);
|
|
|
|
/* Enable receiver and transmitter. */
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_ENABLE);
|
|
xl_wait(sc);
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_ENABLE);
|
|
xl_wait(sc);
|
|
|
|
if (mii != NULL)
|
|
mii_mediachg(mii);
|
|
|
|
/* Select window 7 for normal operations. */
|
|
XL_SEL_WIN(7);
|
|
|
|
ifp->if_flags |= IFF_RUNNING;
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
|
|
sc->xl_stat_ch = timeout(xl_stats_update, sc, hz);
|
|
|
|
XL_UNLOCK(sc);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Set media options.
|
|
*/
|
|
static int
|
|
xl_ifmedia_upd(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct xl_softc *sc;
|
|
struct ifmedia *ifm = NULL;
|
|
struct mii_data *mii = NULL;
|
|
|
|
sc = ifp->if_softc;
|
|
if (sc->xl_miibus != NULL)
|
|
mii = device_get_softc(sc->xl_miibus);
|
|
if (mii == NULL)
|
|
ifm = &sc->ifmedia;
|
|
else
|
|
ifm = &mii->mii_media;
|
|
|
|
switch(IFM_SUBTYPE(ifm->ifm_media)) {
|
|
case IFM_100_FX:
|
|
case IFM_10_FL:
|
|
case IFM_10_2:
|
|
case IFM_10_5:
|
|
xl_setmode(sc, ifm->ifm_media);
|
|
return(0);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (sc->xl_media & XL_MEDIAOPT_MII || sc->xl_media & XL_MEDIAOPT_BTX
|
|
|| sc->xl_media & XL_MEDIAOPT_BT4) {
|
|
xl_init(sc);
|
|
} else {
|
|
xl_setmode(sc, ifm->ifm_media);
|
|
}
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Report current media status.
|
|
*/
|
|
static void
|
|
xl_ifmedia_sts(ifp, ifmr)
|
|
struct ifnet *ifp;
|
|
struct ifmediareq *ifmr;
|
|
{
|
|
struct xl_softc *sc;
|
|
u_int32_t icfg;
|
|
u_int16_t status = 0;
|
|
struct mii_data *mii = NULL;
|
|
|
|
sc = ifp->if_softc;
|
|
if (sc->xl_miibus != NULL)
|
|
mii = device_get_softc(sc->xl_miibus);
|
|
|
|
XL_SEL_WIN(4);
|
|
status = CSR_READ_2(sc, XL_W4_MEDIA_STATUS);
|
|
|
|
XL_SEL_WIN(3);
|
|
icfg = CSR_READ_4(sc, XL_W3_INTERNAL_CFG) & XL_ICFG_CONNECTOR_MASK;
|
|
icfg >>= XL_ICFG_CONNECTOR_BITS;
|
|
|
|
ifmr->ifm_active = IFM_ETHER;
|
|
ifmr->ifm_status = IFM_AVALID;
|
|
|
|
if ((status & XL_MEDIASTAT_CARRIER) == 0)
|
|
ifmr->ifm_status |= IFM_ACTIVE;
|
|
|
|
switch(icfg) {
|
|
case XL_XCVR_10BT:
|
|
ifmr->ifm_active = IFM_ETHER|IFM_10_T;
|
|
if (CSR_READ_1(sc, XL_W3_MAC_CTRL) & XL_MACCTRL_DUPLEX)
|
|
ifmr->ifm_active |= IFM_FDX;
|
|
else
|
|
ifmr->ifm_active |= IFM_HDX;
|
|
break;
|
|
case XL_XCVR_AUI:
|
|
if (sc->xl_type == XL_TYPE_905B &&
|
|
sc->xl_media == XL_MEDIAOPT_10FL) {
|
|
ifmr->ifm_active = IFM_ETHER|IFM_10_FL;
|
|
if (CSR_READ_1(sc, XL_W3_MAC_CTRL) & XL_MACCTRL_DUPLEX)
|
|
ifmr->ifm_active |= IFM_FDX;
|
|
else
|
|
ifmr->ifm_active |= IFM_HDX;
|
|
} else
|
|
ifmr->ifm_active = IFM_ETHER|IFM_10_5;
|
|
break;
|
|
case XL_XCVR_COAX:
|
|
ifmr->ifm_active = IFM_ETHER|IFM_10_2;
|
|
break;
|
|
/*
|
|
* XXX MII and BTX/AUTO should be separate cases.
|
|
*/
|
|
|
|
case XL_XCVR_100BTX:
|
|
case XL_XCVR_AUTO:
|
|
case XL_XCVR_MII:
|
|
if (mii != NULL) {
|
|
mii_pollstat(mii);
|
|
ifmr->ifm_active = mii->mii_media_active;
|
|
ifmr->ifm_status = mii->mii_media_status;
|
|
}
|
|
break;
|
|
case XL_XCVR_100BFX:
|
|
ifmr->ifm_active = IFM_ETHER|IFM_100_FX;
|
|
break;
|
|
default:
|
|
printf("xl%d: unknown XCVR type: %d\n", sc->xl_unit, icfg);
|
|
break;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static int
|
|
xl_ioctl(ifp, command, data)
|
|
struct ifnet *ifp;
|
|
u_long command;
|
|
caddr_t data;
|
|
{
|
|
struct xl_softc *sc = ifp->if_softc;
|
|
struct ifreq *ifr = (struct ifreq *) data;
|
|
int error = 0;
|
|
struct mii_data *mii = NULL;
|
|
u_int8_t rxfilt;
|
|
|
|
XL_LOCK(sc);
|
|
|
|
switch(command) {
|
|
case SIOCSIFFLAGS:
|
|
XL_SEL_WIN(5);
|
|
rxfilt = CSR_READ_1(sc, XL_W5_RX_FILTER);
|
|
if (ifp->if_flags & IFF_UP) {
|
|
if (ifp->if_flags & IFF_RUNNING &&
|
|
ifp->if_flags & IFF_PROMISC &&
|
|
!(sc->xl_if_flags & IFF_PROMISC)) {
|
|
rxfilt |= XL_RXFILTER_ALLFRAMES;
|
|
CSR_WRITE_2(sc, XL_COMMAND,
|
|
XL_CMD_RX_SET_FILT|rxfilt);
|
|
XL_SEL_WIN(7);
|
|
} else if (ifp->if_flags & IFF_RUNNING &&
|
|
!(ifp->if_flags & IFF_PROMISC) &&
|
|
sc->xl_if_flags & IFF_PROMISC) {
|
|
rxfilt &= ~XL_RXFILTER_ALLFRAMES;
|
|
CSR_WRITE_2(sc, XL_COMMAND,
|
|
XL_CMD_RX_SET_FILT|rxfilt);
|
|
XL_SEL_WIN(7);
|
|
} else
|
|
xl_init(sc);
|
|
} else {
|
|
if (ifp->if_flags & IFF_RUNNING)
|
|
xl_stop(sc);
|
|
}
|
|
sc->xl_if_flags = ifp->if_flags;
|
|
error = 0;
|
|
break;
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
if (sc->xl_type == XL_TYPE_905B)
|
|
xl_setmulti_hash(sc);
|
|
else
|
|
xl_setmulti(sc);
|
|
error = 0;
|
|
break;
|
|
case SIOCGIFMEDIA:
|
|
case SIOCSIFMEDIA:
|
|
if (sc->xl_miibus != NULL)
|
|
mii = device_get_softc(sc->xl_miibus);
|
|
if (mii == NULL)
|
|
error = ifmedia_ioctl(ifp, ifr,
|
|
&sc->ifmedia, command);
|
|
else
|
|
error = ifmedia_ioctl(ifp, ifr,
|
|
&mii->mii_media, command);
|
|
break;
|
|
case SIOCSIFCAP:
|
|
ifp->if_capenable = ifr->ifr_reqcap;
|
|
if (ifp->if_capenable & IFCAP_TXCSUM)
|
|
ifp->if_hwassist = XL905B_CSUM_FEATURES;
|
|
else
|
|
ifp->if_hwassist = 0;
|
|
break;
|
|
default:
|
|
error = ether_ioctl(ifp, command, data);
|
|
break;
|
|
}
|
|
|
|
XL_UNLOCK(sc);
|
|
|
|
return(error);
|
|
}
|
|
|
|
static void
|
|
xl_watchdog(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct xl_softc *sc;
|
|
u_int16_t status = 0;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
XL_LOCK(sc);
|
|
|
|
ifp->if_oerrors++;
|
|
XL_SEL_WIN(4);
|
|
status = CSR_READ_2(sc, XL_W4_MEDIA_STATUS);
|
|
printf("xl%d: watchdog timeout\n", sc->xl_unit);
|
|
|
|
if (status & XL_MEDIASTAT_CARRIER)
|
|
printf("xl%d: no carrier - transceiver cable problem?\n",
|
|
sc->xl_unit);
|
|
xl_txeoc(sc);
|
|
xl_txeof(sc);
|
|
xl_rxeof(sc);
|
|
xl_reset(sc);
|
|
xl_init(sc);
|
|
|
|
if (ifp->if_snd.ifq_head != NULL)
|
|
(*ifp->if_start)(ifp);
|
|
|
|
XL_UNLOCK(sc);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Stop the adapter and free any mbufs allocated to the
|
|
* RX and TX lists.
|
|
*/
|
|
static void
|
|
xl_stop(sc)
|
|
struct xl_softc *sc;
|
|
{
|
|
register int i;
|
|
struct ifnet *ifp;
|
|
|
|
XL_LOCK(sc);
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
ifp->if_timer = 0;
|
|
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_DISABLE);
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_STATS_DISABLE);
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_INTR_ENB);
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_DISCARD);
|
|
xl_wait(sc);
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_DISABLE);
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_COAX_STOP);
|
|
DELAY(800);
|
|
|
|
#ifdef foo
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_RESET);
|
|
xl_wait(sc);
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_RESET);
|
|
xl_wait(sc);
|
|
#endif
|
|
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_INTR_ACK|XL_STAT_INTLATCH);
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_STAT_ENB|0);
|
|
CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_INTR_ENB|0);
|
|
if (sc->xl_flags & XL_FLAG_FUNCREG) bus_space_write_4 (sc->xl_ftag, sc->xl_fhandle, 4, 0x8000);
|
|
|
|
/* Stop the stats updater. */
|
|
untimeout(xl_stats_update, sc, sc->xl_stat_ch);
|
|
|
|
/*
|
|
* Free data in the RX lists.
|
|
*/
|
|
for (i = 0; i < XL_RX_LIST_CNT; i++) {
|
|
if (sc->xl_cdata.xl_rx_chain[i].xl_mbuf != NULL) {
|
|
bus_dmamap_unload(sc->xl_mtag,
|
|
sc->xl_cdata.xl_rx_chain[i].xl_map);
|
|
bus_dmamap_destroy(sc->xl_mtag,
|
|
sc->xl_cdata.xl_rx_chain[i].xl_map);
|
|
m_freem(sc->xl_cdata.xl_rx_chain[i].xl_mbuf);
|
|
sc->xl_cdata.xl_rx_chain[i].xl_mbuf = NULL;
|
|
}
|
|
}
|
|
bzero(sc->xl_ldata.xl_rx_list, XL_RX_LIST_SZ);
|
|
/*
|
|
* Free the TX list buffers.
|
|
*/
|
|
for (i = 0; i < XL_TX_LIST_CNT; i++) {
|
|
if (sc->xl_cdata.xl_tx_chain[i].xl_mbuf != NULL) {
|
|
bus_dmamap_unload(sc->xl_mtag,
|
|
sc->xl_cdata.xl_tx_chain[i].xl_map);
|
|
bus_dmamap_destroy(sc->xl_mtag,
|
|
sc->xl_cdata.xl_tx_chain[i].xl_map);
|
|
m_freem(sc->xl_cdata.xl_tx_chain[i].xl_mbuf);
|
|
sc->xl_cdata.xl_tx_chain[i].xl_mbuf = NULL;
|
|
}
|
|
}
|
|
bzero(sc->xl_ldata.xl_tx_list, XL_TX_LIST_SZ);
|
|
|
|
ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
|
|
|
|
XL_UNLOCK(sc);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Stop all chip I/O so that the kernel's probe routines don't
|
|
* get confused by errant DMAs when rebooting.
|
|
*/
|
|
static void
|
|
xl_shutdown(dev)
|
|
device_t dev;
|
|
{
|
|
struct xl_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
XL_LOCK(sc);
|
|
xl_reset(sc);
|
|
xl_stop(sc);
|
|
XL_UNLOCK(sc);
|
|
|
|
return;
|
|
}
|
|
|
|
static int
|
|
xl_suspend(dev)
|
|
device_t dev;
|
|
{
|
|
struct xl_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
XL_LOCK(sc);
|
|
xl_stop(sc);
|
|
XL_UNLOCK(sc);
|
|
|
|
return(0);
|
|
}
|
|
|
|
static int
|
|
xl_resume(dev)
|
|
device_t dev;
|
|
{
|
|
struct xl_softc *sc;
|
|
struct ifnet *ifp;
|
|
|
|
sc = device_get_softc(dev);
|
|
XL_LOCK(sc);
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
xl_reset(sc);
|
|
if (ifp->if_flags & IFF_UP)
|
|
xl_init(sc);
|
|
|
|
XL_UNLOCK(sc);
|
|
return(0);
|
|
}
|