freebsd-skq/sys/i386/isa/ppc.c
msmith 2fdb23234a Major ppbus updates from the author.
- ppbus now supports PLIP via the if_plip driver
 - ieee1284 infrastructure added, including parallel-port PnP
 - port microsequencer added, for scripting the sort of port I/O
   that is common with parallel devices without endless calls up and down
   through the driver structure.
 - improved bus ownership behaviour among the ppbus-using drivers.
 - improved I/O chipset feature detection

The vpo driver is now implemented using the microsequencer, leading to
some performance improvements as well as providing an extensive example
of its use.

Reviewed by:	msmith
Submitted by:	Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1998-08-03 19:14:33 +00:00

1147 lines
27 KiB
C

/*-
* Copyright (c) 1997, 1998 Nicolas Souchu
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Id: ppc.c,v 1.3 1998/04/17 22:36:37 des Exp $
*
*/
#include "ppc.h"
#if NPPC > 0
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/conf.h>
#include <sys/malloc.h>
#include <machine/clock.h>
#include <vm/vm.h>
#include <vm/vm_param.h>
#include <vm/pmap.h>
#include <i386/isa/isa_device.h>
#include <dev/ppbus/ppbconf.h>
#include <dev/ppbus/ppb_msq.h>
#include <i386/isa/ppcreg.h>
static int ppcprobe(struct isa_device *);
static int ppcattach(struct isa_device *);
struct isa_driver ppcdriver = {
ppcprobe, ppcattach, "ppc"
};
static struct ppc_data *ppcdata[NPPC];
static int nppc = 0;
static char *ppc_types[] = {
"SMC-like", "SMC FDC37C665GT", "SMC FDC37C666GT", "PC87332", "PC87306",
"82091AA", "Generic", "W83877F", "W83877AF", "Winbond", 0
};
/* list of available modes */
static char *ppc_avms[] = {
"COMPATIBLE", "NIBBLE-only", "PS2-only", "PS2/NIBBLE", "EPP-only",
"EPP/NIBBLE", "EPP/PS2", "EPP/PS2/NIBBLE", "ECP-only",
"ECP/NIBBLE", "ECP/PS2", "ECP/PS2/NIBBLE", "ECP/EPP",
"ECP/EPP/NIBBLE", "ECP/EPP/PS2", "ECP/EPP/PS2/NIBBLE", 0
};
/* list of current executing modes
* Note that few modes do not actually exist.
*/
static char *ppc_modes[] = {
"COMPATIBLE", "NIBBLE", "PS/2", "PS/2", "EPP",
"EPP", "EPP", "EPP", "ECP",
"ECP", "ECP+PS2", "ECP+PS2", "ECP+EPP",
"ECP+EPP", "ECP+EPP", "ECP+EPP", 0
};
static char *ppc_epp_protocol[] = { " (EPP 1.9)", " (EPP 1.7)", 0 };
/*
* BIOS printer list - used by BIOS probe.
*/
#define BIOS_PPC_PORTS 0x408
#define BIOS_PORTS (short *)(KERNBASE+BIOS_PPC_PORTS)
#define BIOS_MAX_PPC 4
/*
* All these functions are default actions for IN/OUT operations.
* They may be redefined if needed.
*/
static void ppc_outsb_epp(int unit, char *addr, int cnt) {
outsb(ppcdata[unit]->ppc_base + PPC_EPP_DATA, addr, cnt); }
static void ppc_outsw_epp(int unit, char *addr, int cnt) {
outsw(ppcdata[unit]->ppc_base + PPC_EPP_DATA, addr, cnt); }
static void ppc_outsl_epp(int unit, char *addr, int cnt) {
outsl(ppcdata[unit]->ppc_base + PPC_EPP_DATA, addr, cnt); }
static void ppc_insb_epp(int unit, char *addr, int cnt) {
insb(ppcdata[unit]->ppc_base + PPC_EPP_DATA, addr, cnt); }
static void ppc_insw_epp(int unit, char *addr, int cnt) {
insw(ppcdata[unit]->ppc_base + PPC_EPP_DATA, addr, cnt); }
static void ppc_insl_epp(int unit, char *addr, int cnt) {
insl(ppcdata[unit]->ppc_base + PPC_EPP_DATA, addr, cnt); }
static char ppc_rdtr(int unit) { return r_dtr(ppcdata[unit]); }
static char ppc_rstr(int unit) { return r_str(ppcdata[unit]); }
static char ppc_rctr(int unit) { return r_ctr(ppcdata[unit]); }
static char ppc_repp(int unit) { return r_epp(ppcdata[unit]); }
static char ppc_recr(int unit) { return r_ecr(ppcdata[unit]); }
static char ppc_rfifo(int unit) { return r_fifo(ppcdata[unit]); }
static void ppc_wdtr(int unit, char byte) { w_dtr(ppcdata[unit], byte); }
static void ppc_wstr(int unit, char byte) { w_str(ppcdata[unit], byte); }
static void ppc_wctr(int unit, char byte) { w_ctr(ppcdata[unit], byte); }
static void ppc_wepp(int unit, char byte) { w_epp(ppcdata[unit], byte); }
static void ppc_wecr(int unit, char byte) { w_ecr(ppcdata[unit], byte); }
static void ppc_wfifo(int unit, char byte) { w_fifo(ppcdata[unit], byte); }
static void ppc_reset_epp_timeout(int);
static void ppc_ecp_sync(int);
static int ppc_exec_microseq(int, struct ppb_microseq *, int *);
static int ppc_generic_setmode(int, int);
static struct ppb_adapter ppc_adapter = {
0, /* no intr handler, filled by chipset dependent code */
ppc_reset_epp_timeout, ppc_ecp_sync,
ppc_exec_microseq,
ppc_generic_setmode,
ppc_outsb_epp, ppc_outsw_epp, ppc_outsl_epp,
ppc_insb_epp, ppc_insw_epp, ppc_insl_epp,
ppc_rdtr, ppc_rstr, ppc_rctr, ppc_repp, ppc_recr, ppc_rfifo,
ppc_wdtr, ppc_wstr, ppc_wctr, ppc_wepp, ppc_wecr, ppc_wfifo
};
/*
* ppc_ecp_sync() XXX
*/
static void
ppc_ecp_sync(int unit) {
struct ppc_data *ppc = ppcdata[unit];
int i, r;
r = r_ecr(ppc);
if ((r & 0xe0) != 0x80)
return;
for (i = 0; i < 100; i++) {
r = r_ecr(ppc);
if (r & 0x1)
return;
DELAY(100);
}
printf("ppc%d: ECP sync failed as data still " \
"present in FIFO.\n", unit);
return;
}
void
ppcintr(int unit)
{
/* call directly upper code */
ppb_intr(&ppcdata[unit]->ppc_link);
return;
}
static void
ppc_ecp_config(struct ppc_data *ppc, int chipset_mode)
{
/* XXX disable DMA, enable interrupts */
if (chipset_mode & PPB_EPP)
/* select EPP mode */
w_ecr(ppc, 0x80);
else if (chipset_mode & PPB_PS2)
/* select PS2 mode with ECP */
w_ecr(ppc, 0x20);
else
/* keep ECP mode alone, default for NIBBLE */
w_ecr(ppc, 0x70);
return;
}
static int
ppc_detect_port(struct ppc_data *ppc)
{
w_ctr(ppc, 0x0c); /* To avoid missing PS2 ports */
w_dtr(ppc, 0xaa);
if (r_dtr(ppc) != (char) 0xaa)
return (0);
return (1);
}
/*
* ppc_pc873xx_detect
*
* Probe for a Natsemi PC873xx-family part.
*
* References in this function are to the National Semiconductor
* PC87332 datasheet TL/C/11930, May 1995 revision.
*/
static int pc873xx_basetab[] = {0x0398, 0x026e, 0x015c, 0x002e, 0};
static int pc873xx_porttab[] = {0x0378, 0x03bc, 0x0278, 0};
static int
ppc_pc873xx_detect(struct ppc_data *ppc, int chipset_mode) /* XXX mode never forced */
{
static int index = 0;
int base, idport;
int val;
while ((idport = pc873xx_basetab[index++])) {
/* XXX should check first to see if this location is already claimed */
/*
* Pull the 873xx through the power-on ID cycle (2.2,1.). We can't use this
* to locate the chip as it may already have been used by the BIOS.
*/
(void)inb(idport); (void)inb(idport); (void)inb(idport); (void)inb(idport);
/*
* Read the SID byte. Possible values are :
*
* 0001xxxx PC87332
* 01110xxx PC87306
*/
outb(idport, PC873_SID);
val = inb(idport + 1);
if ((val & 0xf0) == 0x10) {
ppc->ppc_type = NS_PC87332;
} else if ((val & 0xf8) == 0x70) {
ppc->ppc_type = NS_PC87306;
} else {
if (bootverbose && (val != 0xff))
printf("PC873xx probe at 0x%x got unknown ID 0x%x\n", idport, val);
continue ; /* not recognised */
}
/*
* We think we have one. Is it enabled and where we want it to be?
*/
outb(idport, PC873_FER);
val = inb(idport + 1);
if (!(val & PC873_PPENABLE)) {
if (bootverbose)
printf("PC873xx parallel port disabled\n");
continue;
}
outb(idport, PC873_FAR);
val = inb(idport + 1) & 0x3;
/* XXX we should create a driver instance for every port found */
if (pc873xx_porttab[val] != ppc->ppc_base) {
if (bootverbose)
printf("PC873xx at 0x%x not for driver at port 0x%x\n",
pc873xx_porttab[val], ppc->ppc_base);
continue;
}
/*
* This is the port we want. Can we dink with it to improve
* our chances?
*/
outb(idport, PC873_PTR);
val = inb(idport + 1);
if (val & PC873_CFGLOCK) {
if (bootverbose)
printf("PC873xx locked\n");
/* work out what mode we're in */
ppc->ppc_avm |= PPB_NIBBLE; /* worst case */
outb(idport, PC873_PCR);
val = inb(idport + 1);
if ((val & PC873_EPPEN) && (val & PC873_EPP19)) {
outb(idport, PC873_PTR);
val = inb(idport + 1);
if (!(val & PC873_EPPRDIR)) {
ppc->ppc_avm |= PPB_EPP; /* As we would have done it anwyay */
}
} else if ((val & PC873_ECPEN) && (val & PC873_ECPCLK)) {
ppc->ppc_avm |= PPB_PS2; /* tolerable alternative */
}
} else {
if (bootverbose)
printf("PC873xx unlocked, ");
#if 0 /* broken */
/*
* Frob the zero-wait-state option if possible; it causes
* unreliable operation.
*/
outb(idport, PC873_FCR);
val = inb(idport + 1);
if ((ppc->ppc_type == NS_PC87306) || /* we are a '306 */
!(val & PC873_ZWSPWDN)) { /* or pin _is_ ZWS */
val &= ~PC873_ZWS;
outb(idport + 1, val); /* must disable ZWS */
outb(idport + 1, val);
if (bootverbose)
printf("ZWS %s, ", (val & PC873_ZWS) ? "enabled" : "disabled");
}
#endif
if (bootverbose)
printf("reconfiguring for ");
/*
* if the chip is at 0x3bc, we can't use EPP as there's no room
* for the extra registers.
*
* XXX should we use ECP mode always and use the EPP submode?
*/
if (ppc->ppc_base != 0x3bc) {
if (bootverbose)
printf("EPP 1.9\n");
/* configure for EPP 1.9 operation XXX should be configurable */
outb(idport, PC873_PCR);
val = inb(idport + 1);
val &= ~(PC873_ECPEN | PC873_ECPCLK); /* disable ECP */
val |= (PC873_EPPEN | PC873_EPP19); /* enable EPP */
outb(idport + 1, val);
outb(idport + 1, val);
/* enable automatic direction turnover */
outb(idport, PC873_PTR);
val = inb(idport + 1);
val &= ~PC873_EPPRDIR; /* disable "regular" direction change */
outb(idport + 1, val);
outb(idport + 1, val);
/* we are an EPP-32 port */
ppc->ppc_avm |= PPB_EPP;
} else {
if (bootverbose)
printf("ECP\n");
/* configure as an ECP port to get bidirectional operation for now */
outb(idport, PC873_PCR);
outb(idport + 1, inb(idport + 1) | PC873_ECPEN | PC873_ECPCLK);
/* we look like a PS/2 port */
ppc->ppc_avm |= PPB_PS2;
}
}
return(chipset_mode);
}
return(-1);
}
static int
ppc_check_epp_timeout(struct ppc_data *ppc)
{
ppc_reset_epp_timeout(ppc->ppc_unit);
return (!(r_str(ppc) & TIMEOUT));
}
/*
* ppc_smc37c66xgt_detect
*
* SMC FDC37C66xGT configuration.
*/
static int
ppc_smc37c66xgt_detect(struct ppc_data *ppc, int chipset_mode)
{
int s, i;
char r;
int type = -1;
int csr = SMC66x_CSR; /* initial value is 0x3F0 */
int port_address[] = { -1 /* disabled */ , 0x3bc, 0x378, 0x278 };
#define cio csr+1 /* config IO port is either 0x3F1 or 0x371 */
/*
* Detection: enter configuration mode and read CRD register.
*/
s = splhigh();
outb(csr, SMC665_iCODE);
outb(csr, SMC665_iCODE);
splx(s);
outb(csr, 0xd);
if (inb(cio) == 0x65) {
type = SMC_37C665GT;
goto config;
}
for (i = 0; i < 2; i++) {
s = splhigh();
outb(csr, SMC666_iCODE);
outb(csr, SMC666_iCODE);
splx(s);
outb(csr, 0xd);
if (inb(cio) == 0x66) {
type = SMC_37C666GT;
break;
}
/* Another chance, CSR may be hard-configured to be at 0x370 */
csr = SMC666_CSR;
}
config:
/*
* If chipset not found, do not continue.
*/
if (type == -1)
return (-1);
/* select CR1 */
outb(csr, 0x1);
/* read the port's address: bits 0 and 1 of CR1 */
r = inb(cio) & SMC_CR1_ADDR;
if (port_address[r] != ppc->ppc_base)
return (-1);
ppc->ppc_type = type;
/*
* CR1 and CR4 registers bits 3 and 0/1 for mode configuration
* If SPP mode is detected, try to set ECP+EPP mode
*/
if (bootverbose) {
outb(csr, 0x1);
printf("SMC registers CR1=0x%x", ppc->ppc_unit,
inb(cio) & 0xff);
outb(csr, 0x4);
printf(" CR4=0x%x", inb(cio) & 0xff);
}
/* select CR1 */
outb(csr, 0x1);
if (!chipset_mode) {
/* autodetect mode */
/* 666GT is ~certainly~ hardwired to an extended ECP+EPP mode */
if (type == SMC_37C666GT) {
ppc->ppc_avm |= PPB_ECP | PPB_EPP | PPB_SPP;
} else
if ((inb(cio) & SMC_CR1_MODE) == 0) {
/* already in extended parallel port mode, read CR4 */
outb(csr, 0x4);
r = (inb(cio) & SMC_CR4_EMODE);
switch (r) {
case SMC_SPP:
ppc->ppc_avm |= PPB_SPP;
break;
case SMC_EPPSPP:
ppc->ppc_avm |= PPB_EPP | PPB_SPP;
break;
case SMC_ECP:
ppc->ppc_avm |= PPB_ECP | PPB_SPP;
break;
case SMC_ECPEPP:
ppc->ppc_avm |= PPB_ECP | PPB_EPP | PPB_SPP;
break;
}
} else {
/* not an extended port mode */
ppc->ppc_avm |= PPB_SPP;
}
} else {
/* mode forced */
/* 666GT is ~certainly~ hardwired to an extended ECP+EPP mode */
if (type == SMC_37C666GT)
goto end_detect;
r = inb(cio);
if ((chipset_mode & (PPB_ECP | PPB_EPP)) == 0) {
/* do not use ECP when the mode is not forced to */
outb(cio, r | SMC_CR1_MODE);
} else {
/* an extended mode is selected */
outb(cio, r & ~SMC_CR1_MODE);
/* read CR4 register and reset mode field */
outb(csr, 0x4);
r = inb(cio) & ~SMC_CR4_EMODE;
if (chipset_mode & PPB_ECP) {
if (chipset_mode & PPB_EPP) {
outb(cio, r | SMC_ECPEPP);
} else {
outb(cio, r | SMC_ECP);
}
} else {
/* PPB_EPP is set */
outb(cio, r | SMC_EPPSPP);
}
}
ppc->ppc_avm = chipset_mode;
}
end_detect:
if (bootverbose)
printf ("\n");
if (chipset_mode & PPB_EPP) {
/* select CR4 */
outb(csr, 0x4);
r = inb(cio);
/*
* Set the EPP protocol...
* Low=EPP 1.9 (1284 standard) and High=EPP 1.7
*/
if (ppc->ppc_epp == EPP_1_9)
outb(cio, (r & ~SMC_CR4_EPPTYPE));
else
outb(cio, (r | SMC_CR4_EPPTYPE));
}
/* end config mode */
outb(csr, 0xaa);
if (ppc->ppc_avm & PPB_ECP)
ppc_ecp_config(ppc, chipset_mode);
return (chipset_mode);
}
/*
* Winbond W83877F stuff
*
* EFER: extended function enable register
* EFIR: extended function index register
* EFDR: extended function data register
*/
#define efir ((efer == 0x250) ? 0x251 : 0x3f0)
#define efdr ((efer == 0x250) ? 0x252 : 0x3f1)
static int w83877f_efers[] = { 0x250, 0x3f0, 0x3f0, 0x250 };
static int w83877f_keys[] = { 0x89, 0x86, 0x87, 0x88 };
static int w83877f_keyiter[] = { 1, 2, 2, 1 };
static int w83877f_hefs[] = { WINB_HEFERE, WINB_HEFRAS, WINB_HEFERE | WINB_HEFRAS, 0 };
static int
ppc_w83877f_detect(struct ppc_data *ppc, int chipset_mode)
{
int i, j, efer, base;
unsigned char r, hefere, hefras;
for (i = 0; i < 4; i ++) {
/* first try to enable configuration registers */
efer = w83877f_efers[i];
/* write the key to the EFER */
for (j = 0; j < w83877f_keyiter[i]; j ++)
outb (efer, w83877f_keys[i]);
/* then check HEFERE and HEFRAS bits */
outb (efir, 0x0c);
hefere = inb(efdr) & WINB_HEFERE;
outb (efir, 0x16);
hefras = inb(efdr) & WINB_HEFRAS;
/*
* HEFRAS HEFERE
* 0 1 write 89h to 250h (power-on default)
* 1 0 write 86h twice to 3f0h
* 1 1 write 87h twice to 3f0h
* 0 0 write 88h to 250h
*/
if ((hefere | hefras) == w83877f_hefs[i])
goto found;
}
return (-1); /* failed */
found:
/* check base port address - read from CR23 */
outb(efir, 0x23);
if (ppc->ppc_base != inb(efdr) * 4) /* 4 bytes boundaries */
return (-1);
/* read CHIP ID from CR9/bits0-3 */
outb(efir, 0x9);
switch (inb(efdr) & WINB_CHIPID) {
case WINB_W83877F_ID:
ppc->ppc_type = WINB_W83877F;
break;
case WINB_W83877AF_ID:
ppc->ppc_type = WINB_W83877AF;
break;
default:
ppc->ppc_type = WINB_UNKNOWN;
}
if (bootverbose) {
/* dump of registers */
printf("ppc%d: 0x%x - ", ppc->ppc_unit, w83877f_keys[i]);
for (i = 0; i <= 0xd; i ++) {
outb(efir, i);
printf("0x%x ", inb(efdr));
}
for (i = 0x10; i <= 0x17; i ++) {
outb(efir, i);
printf("0x%x ", inb(efdr));
}
outb(efir, 0x1e);
printf("0x%x ", inb(efdr));
for (i = 0x20; i <= 0x29; i ++) {
outb(efir, i);
printf("0x%x ", inb(efdr));
}
printf("\n");
}
if (!chipset_mode) {
/* autodetect mode */
/* select CR0 */
outb(efir, 0x0);
r = inb(efdr) & (WINB_PRTMODS0 | WINB_PRTMODS1);
/* select CR9 */
outb(efir, 0x9);
r |= (inb(efdr) & WINB_PRTMODS2);
switch (r) {
case WINB_W83757:
if (bootverbose)
printf("ppc%d: W83757 compatible mode\n",
ppc->ppc_unit);
return (-1); /* generic or SMC-like */
case WINB_EXTFDC:
case WINB_EXTADP:
case WINB_EXT2FDD:
case WINB_JOYSTICK:
if (bootverbose)
printf("ppc%d: not in parallel port mode\n",
ppc->ppc_unit);
return (-1);
case (WINB_PARALLEL | WINB_EPP_SPP):
ppc->ppc_avm |= PPB_EPP | PPB_SPP;
break;
case (WINB_PARALLEL | WINB_ECP):
ppc->ppc_avm |= PPB_ECP | PPB_SPP;
break;
case (WINB_PARALLEL | WINB_ECP_EPP):
ppc->ppc_avm |= PPB_ECP | PPB_EPP | PPB_SPP;
break;
default:
printf("%s: unknown case (0x%x)!\n", __FUNCTION__, r);
}
} else {
/* mode forced */
/* select CR9 and set PRTMODS2 bit */
outb(efir, 0x9);
outb(efdr, inb(efdr) & ~WINB_PRTMODS2);
/* select CR0 and reset PRTMODSx bits */
outb(efir, 0x0);
outb(efdr, inb(efdr) & ~(WINB_PRTMODS0 | WINB_PRTMODS1));
if (chipset_mode & PPB_ECP) {
if (chipset_mode & PPB_EPP)
outb(efdr, inb(efdr) | WINB_ECP_EPP);
else
outb(efdr, inb(efdr) | WINB_ECP);
} else {
/* select EPP_SPP otherwise */
outb(efdr, inb(efdr) | WINB_EPP_SPP);
}
ppc->ppc_avm = chipset_mode;
}
/* exit configuration mode */
outb(efer, 0xaa);
if (ppc->ppc_avm & PPB_ECP)
ppc_ecp_config(ppc, chipset_mode);
return (chipset_mode);
}
/*
* ppc_generic_detect
*/
static int
ppc_generic_detect(struct ppc_data *ppc, int chipset_mode)
{
char save_control;
if (!chipset_mode) {
/* first, check for ECP */
w_ecr(ppc, 0x20);
if ((r_ecr(ppc) & 0xe0) == 0x20) {
ppc->ppc_avm |= PPB_ECP | PPB_SPP;
/* search for SMC style ECP+EPP mode */
w_ecr(ppc, 0x80);
}
/* try to reset EPP timeout bit */
if (ppc_check_epp_timeout(ppc)) {
ppc->ppc_avm |= PPB_EPP;
if (ppc->ppc_avm & PPB_ECP)
/* SMC like chipset found */
ppc->ppc_type = SMC_LIKE;
}
/* XXX try to detect NIBBLE mode */
ppc->ppc_avm |= PPB_NIBBLE;
} else
ppc->ppc_avm = chipset_mode;
if (ppc->ppc_avm & PPB_ECP)
ppc_ecp_config(ppc, chipset_mode);
return (chipset_mode);
}
/*
* ppc_detect()
*
* mode is the mode suggested at boot
*/
static int
ppc_detect(struct ppc_data *ppc, int chipset_mode) {
int i, mode;
/* list of supported chipsets */
int (*chipset_detect[])(struct ppc_data *, int) = {
ppc_pc873xx_detect,
ppc_smc37c66xgt_detect,
ppc_w83877f_detect,
ppc_generic_detect,
NULL
};
/* if can't find the port and mode not forced return error */
if (!ppc_detect_port(ppc) && chipset_mode == 0)
return (EIO); /* failed, port not present */
/* assume centronics compatible mode is supported */
ppc->ppc_avm = PPB_COMPATIBLE;
/* we have to differenciate available chipset modes,
* chipset running modes and IEEE-1284 operating modes
*
* after detection, the port must support running in compatible mode
*/
for (i=0; chipset_detect[i] != NULL; i++) {
if ((mode = chipset_detect[i](ppc, chipset_mode)) != -1) {
ppc->ppc_mode = mode;
break;
}
}
return (0);
}
/*
* ppc_exec_microseq()
*
* Execute a microsequence.
* Microsequence mechanism is supposed to handle fast I/O operations.
*/
static int
ppc_exec_microseq(int unit, struct ppb_microseq *msq, int *ppbpc)
{
struct ppc_data *ppc = ppcdata[unit];
struct ppb_microseq *pc;
char cc, *p;
int i, iter, reg;
int error;
/* static to be reused after few ppc_exec_microseq()/return calls
* XXX should be in a context variable shared with ppb level */
static int accum;
static char *ptr;
struct ppb_microseq *microseq_stack = 0;
struct ppb_microseq *pc_stack = 0;
/* microsequence registers are equivalent to PC-like port registers */
#define r_reg(register,ppc) ((char)inb((ppc)->ppc_base + register))
#define w_reg(register,ppc,byte) outb((ppc)->ppc_base + register, byte)
#define INCR_PC (pc ++) /* increment program counter */
#define mi pc /* microinstruction currently executed */
/* get the state of pc from ppb level of execution */
pc = &msq[*ppbpc];
for (;;) {
switch (mi->opcode) {
case MS_OP_RSET:
cc = r_reg(mi->arg[0].i, ppc);
cc &= mi->arg[2].c; /* clear mask */
cc |= mi->arg[1].c; /* assert mask */
w_reg(mi->arg[0].i, ppc, cc);
INCR_PC;
break;
case MS_OP_RASSERT_P:
for (i=0; i<mi->arg[0].i; i++)
w_reg(mi->arg[1].i, ppc, *ptr++);
INCR_PC;
break;
case MS_OP_RFETCH_P:
for (i=0; i<mi->arg[0].i; i++)
*ptr++ = r_reg(mi->arg[1].i, ppc) &
mi->arg[2].c;
INCR_PC;
break;
case MS_OP_RFETCH:
*((char *) mi->arg[2].p) = r_reg(mi->arg[0].i, ppc) &
mi->arg[1].c;
INCR_PC;
break;
case MS_OP_RASSERT:
/* let's suppose the next instr. is the same */
prefetch:
for (;mi->opcode == MS_OP_RASSERT; INCR_PC)
w_reg(mi->arg[0].i, ppc, mi->arg[1].c);
if (mi->opcode == MS_OP_DELAY) {
DELAY(mi->arg[0].i);
INCR_PC;
goto prefetch;
}
break;
case MS_OP_DELAY:
DELAY(mi->arg[0].i);
INCR_PC;
break;
case MS_OP_TRIG:
reg = mi->arg[0].i;
iter = mi->arg[1].i;
p = (char *)mi->arg[2].p;
for (i=0; i<iter; i++) {
w_reg(reg, ppc, *p++);
DELAY((unsigned char)*p++);
}
INCR_PC;
break;
case MS_OP_SET:
accum = mi->arg[0].i;
INCR_PC;
break;
case MS_OP_DBRA:
if (--accum > 0)
pc += mi->arg[0].i;
else
INCR_PC;
break;
case MS_OP_BRSET:
cc = r_str(ppc);
if ((cc & mi->arg[0].c) == mi->arg[0].c)
pc += mi->arg[1].i;
else
INCR_PC;
break;
case MS_OP_BRCLEAR:
cc = r_str(ppc);
if ((cc & mi->arg[0].c) == 0)
pc += mi->arg[1].i;
else
INCR_PC;
break;
case MS_OP_C_CALL:
/*
* If the C call returns !0 then end the microseq.
* The current state of ptr is passed to the C function
*/
if ((error = mi->arg[0].f(mi->arg[1].p, ptr)))
return (error);
INCR_PC;
break;
case MS_OP_PTR:
ptr = (char *)mi->arg[0].p;
INCR_PC;
break;
case MS_OP_CALL:
if (microseq_stack)
panic("%s: too much calls", __FUNCTION__);
if (mi->arg[0].p) {
/* store the state of the actual
* microsequence
*/
microseq_stack = msq;
pc_stack = pc;
/* jump to the new microsequence */
msq = (struct ppb_microseq *)mi->arg[0].p;
pc = msq;
} else
INCR_PC;
break;
case MS_OP_SUBRET:
/* retrieve microseq and pc state before the call */
msq = microseq_stack;
pc = pc_stack;
/* reset the stack */
microseq_stack = 0;
/* XXX return code */
INCR_PC;
break;
case MS_OP_PUT:
case MS_OP_GET:
case MS_OP_RET:
/* can't return to ppb level during the execution
* of a submicrosequence */
if (microseq_stack)
panic("%s: can't return to ppb level",
__FUNCTION__);
/* update pc for ppb level of execution */
*ppbpc = (int)(pc - msq);
/* return to ppb level of execution */
return (0);
default:
panic("%s: unknown microsequence opcode 0x%x",
__FUNCTION__, mi->opcode);
}
}
/* unreached */
}
/*
* Configure current operating mode
*/
static int
ppc_generic_setmode(int unit, int mode)
{
struct ppc_data *ppc = ppcdata[unit];
/* back to compatible mode, XXX don't know yet what to do here */
if (mode == 0) {
ppc->ppc_mode = PPB_COMPATIBLE;
return (0);
}
/* check if mode is available */
if (!(ppc->ppc_avm & mode))
return (EOPNOTSUPP);
/* if ECP mode, configure ecr register */
if (ppc->ppc_avm & PPB_ECP)
ppc_ecp_config(ppc, mode);
ppc->ppc_mode = mode;
return (0);
}
/*
* EPP timeout, according to the PC87332 manual
* Semantics of clearing EPP timeout bit.
* PC87332 - reading SPP_STR does it...
* SMC - write 1 to EPP timeout bit XXX
* Others - (???) write 0 to EPP timeout bit
*/
static void
ppc_reset_epp_timeout(int unit)
{
struct ppc_data *ppc = ppcdata[unit];
register char r;
r = r_str(ppc);
w_str(ppc, r | 0x1);
w_str(ppc, r & 0xfe);
return;
}
static int
ppcprobe(struct isa_device *dvp)
{
static short next_bios_ppc = 0;
struct ppc_data *ppc;
int error;
/*
* If port not specified, use bios list.
*/
if(dvp->id_iobase < 0) {
if((next_bios_ppc < BIOS_MAX_PPC) &&
(*(BIOS_PORTS+next_bios_ppc) != 0) ) {
dvp->id_iobase = *(BIOS_PORTS+next_bios_ppc++);
} else
return (0);
}
/*
* Port was explicitly specified.
* This allows probing of ports unknown to the BIOS.
*/
/*
* Allocate the ppc_data structure.
*/
ppc = malloc(sizeof(struct ppc_data), M_DEVBUF, M_NOWAIT);
if (!ppc) {
printf("ppc: cannot malloc!\n");
goto error;
}
bzero(ppc, sizeof(struct ppc_data));
ppc->ppc_base = dvp->id_iobase;
ppc->ppc_unit = dvp->id_unit;
ppc->ppc_type = GENERIC;
ppc->ppc_mode = PPB_COMPATIBLE;
ppc->ppc_epp = (dvp->id_flags & 0x10) >> 4;
/*
* XXX
* Try and detect if interrupts are working.
*/
if (!(dvp->id_flags & 0x20))
ppc->ppc_irq = (dvp->id_irq);
ppcdata[ppc->ppc_unit] = ppc;
nppc ++;
/*
* Try to detect the chipset and its mode.
*/
if (ppc_detect(ppc, dvp->id_flags & 0xf))
goto error;
end_probe:
return (1);
error:
return (0);
}
static int
ppcattach(struct isa_device *isdp)
{
struct ppc_data *ppc = ppcdata[isdp->id_unit];
struct ppb_data *ppbus;
char * mode;
/*
* Link the Parallel Port Chipset (adapter) to
* the future ppbus.
*/
ppc->ppc_link.adapter_unit = ppc->ppc_unit;
ppc->ppc_link.adapter = &ppc_adapter;
printf("ppc%d: %s chipset (%s) in %s mode%s\n", ppc->ppc_unit,
ppc_types[ppc->ppc_type], ppc_avms[ppc->ppc_avm],
ppc_modes[ppc->ppc_mode], (PPB_IS_EPP(ppc->ppc_mode)) ?
ppc_epp_protocol[ppc->ppc_epp] : "");
/*
* Prepare ppbus data area for upper level code.
*/
ppbus = ppb_alloc_bus();
if (!ppbus)
return (0);
ppc->ppc_link.ppbus = ppbus;
ppbus->ppb_link = &ppc->ppc_link;
/*
* Probe the ppbus and attach devices found.
*/
ppb_attachdevs(ppbus);
return (1);
}
#endif