d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5bca221511
freebsd-skq/sys/modules/Makefile
Andriy Gapon 448897d366 add iic interface to ig4 driver, move isl and cyapa to iicbus 
Summary:
The hardware does not expose a classic SMBus interface.
Instead it has a lower level interface that can express a far richer
I2C protocol than what smbus offers.  However, the interface does not
provide a way to explicitly generate the I2C stop and start conditions.
It's only possible to request that the stop condition is generated
after transferring the next byte in either direction.  So, at least
one data byte must always be transferred.
Thus, some I2C sequences are impossible to generate, e.g., an equivalent
of smbus quick command (<start>-<slave addr>-<r/w bit>-<stop>).

At the same time isl(4) and cyapa(4) are moved to iicbus and now they use
iicbus_transfer for communication.  Previously they used smbus_trans()
interface that is not defined by the SMBus protocol and was implemented
only by ig4(4).  In fact, that interface was impossible to implement
for the typical SMBus controllers like intpm(4) or ichsmb(4) where
a type of the SMBus command must be programmed.

The plan is to remove smbus_trans() and all its uses.
As an aside, the smbus_trans() method deviates from the standard,
but perhaps backwards, FreeBSD convention of using 8-bit slave
addresses (shifted by 1 bit to the left).  The method expects
7-bit addresses.

There is a user facing consequence of this change.
A user must now provide device hints for isl and cyapa that specify an iicbus to use
and a slave address on it.
On Chromebook hardware where isl and cyapa devices are commonly found
it is also possible to use a new chromebook_platform(4) driver that
automatically configures isl and cyapa devices.  There is no need to
provide the device hints in that case,

Right now smbus(4) driver tries to discover all slaves on the bus.
That is very dangerous.  Fortunately, the probing code uses smbus_trans()
to do its job, so it is really enabled for ig4 only.
The plan is to remove that auto-probing code and smbus_trans().

Tested by:	grembo, Matthias Apitz <guru@unixarea.de> (w/o
		chromebook_platform)
Discussed with:	grembo, imp
Reviewed by:	wblock (docs)
MFC after:	1 month
Relnotes:	yes
Differential Revision: https://reviews.freebsd.org/D8172
2016-10-30 12:15:33 +00:00

809 lines
12 KiB
Makefile
Raw Blame History

# $FreeBSD$
SYSDIR?=${.CURDIR}/..
.include "${SYSDIR}/conf/kern.opts.mk"
SUBDIR_PARALLEL=
# Modules that include binary-only blobs of microcode should be selectable by
# MK_SOURCELESS_UCODE option (see below).
.if defined(MODULES_OVERRIDE) && !defined(ALL_MODULES)
SUBDIR=${MODULES_OVERRIDE}
.else
SUBDIR= \
${_3dfx} \
${_3dfx_linux} \
${_aac} \
${_aacraid} \
accf_data \
accf_dns \
accf_http \
acl_nfs4 \
acl_posix1e \
${_acpi} \
ae \
${_aesni} \
age \
${_agp} \
aha \
${_ahb} \
ahci \
${_aic} \
aic7xxx \
alc \
ale \
alq \
${_amdsbwd} \
${_amdtemp} \
amr \
${_an} \
${_aout} \
${_apm} \
${_arcmsr} \
${_arcnet} \
${_asmc} \
ata \
ath \
ath_pci \
${_autofs} \
${_auxio} \
${_bce} \
bfe \
bhnd \
bge \
bhnd \
${_bxe} \
${_bios} \
${_bktr} \
${_bm} \
bridgestp \
bwi \
bwn \
bwn_pci \
cam \
${_canbepm} \
${_canbus} \
${_cardbus} \
${_carp} \
cas \
${_cbb} \
cc \
cd9660 \
cd9660_iconv \
${_ce} \
${_cfi} \
${_chromebook_platform} \
${_ciss} \
cloudabi \
${_cloudabi32} \
${_cloudabi64} \
${_cm} \
${_cmx} \
${_coff} \
${_coretemp} \
${_cp} \
${_cpsw} \
${_cpuctl} \
${_cpufreq} \
${_crypto} \
${_cryptodev} \
${_cs} \
${_ct} \
${_ctau} \
ctl \
${_cxgb} \
${_cxgbe} \
dc \
dcons \
dcons_crom \
de \
${_dpms} \
${_dpt} \
${_drm} \
${_drm2} \
dummynet \
${_ed} \
${_efirt} \
${_elink} \
${_em} \
en \
${_ep} \
${_epic} \
esp \
${_et} \
evdev \
${_ex} \
${_exca} \
ext2fs \
${_fatm} \
fdc \
fdescfs \
${_fe} \
filemon \
firewire \
firmware \
fuse \
${_fxp} \
gem \
geom \
${_glxiic} \
${_glxsb} \
gpio \
hatm \
hifn \
hme \
${_hpt27xx} \
${_hptiop} \
${_hptmv} \
${_hptnr} \
${_hptrr} \
hwpmc \
${_hyperv} \
i2c \
${_ibcore} \
${_ibcs2} \
${_ichwd} \
${_ida} \
if_bridge \
if_disc \
if_edsc \
${_if_enc} \
if_epair \
${_if_gif} \
${_if_gre} \
${_if_me} \
if_lagg \
${_if_ndis} \
${_if_stf} \
if_tap \
if_tun \
if_vlan \
if_vxlan \
${_igb} \
${_iir} \
imgact_binmisc \
${_io} \
${_ioat} \
${_ipoib} \
${_ipdivert} \
${_ipfilter} \
${_ipfw} \
ipfw_nat \
${_ipfw_nat64} \
${_ipfw_nptv6} \
${_ipmi} \
ip6_mroute_mod \
ip_mroute_mod \
${_ips} \
${_ipw} \
${_ipwfw} \
${_isci} \
${_iser} \
isp \
${_ispfw} \
${_iwi} \
${_iwifw} \
${_iwm} \
${_iwmfw} \
${_iwn} \
${_iwnfw} \
${_ix} \
${_ixv} \
${_ixgb} \
${_ixl} \
${_ixlv} \
jme \
joy \
kbdmux \
kgssapi \
kgssapi_krb5 \
khelp \
krpc \
ksyms \
le \
lge \
libalias \
libiconv \
libmbpool \
libmchain \
${_linprocfs} \
${_linsysfs} \
${_linux} \
${_linux_common} \
${_linux64} \
linuxkpi \
lmc \
lpt \
mac_biba \
mac_bsdextended \
mac_ifoff \
mac_lomac \
mac_mls \
mac_none \
mac_partition \
mac_portacl \
mac_seeotheruids \
mac_stub \
mac_test \
malo \
md \
mdio \
mem \
mfi \
mii \
mlx \
${_mlx4} \
${_mlx4ib} \
${_mlx4en} \
${_mlx5} \
${_mlx5en} \
${_mly} \
mmc \
mmcsd \
mpr \
mps \
mpt \
mqueue \
mrsas \
msdosfs \
msdosfs_iconv \
${_mse} \
msk \
${_mthca} \
mvs \
mwl \
${_mwlfw} \
mxge \
my \
${_nandfs} \
${_nandsim} \
${_ncr} \
${_nctgpio} \
${_ncv} \
${_ndis} \
netfpga10g \
${_netgraph} \
${_nfe} \
nfscl \
nfscommon \
nfsd \
nfslock \
nfslockd \
nfssvc \
nge \
nmdm \
${_nsp} \
nullfs \
${_ntb} \
${_nvd} \
${_nvme} \
${_nvram} \
${_nxge} \
oce \
otus \
${_otusfw} \
ow \
${_padlock} \
${_padlock_rng} \
patm \
${_pccard} \
${_pcfclock} \
pcn \
${_pf} \
${_pflog} \
${_pfsync} \
plip \
${_pmc} \
${_pms} \
ppbus \
ppc \
ppi \
pps \
procfs \
proto \
pseudofs \
${_pst} \
pty \
puc \
${_qlxge} \
${_qlxgb} \
${_qlxgbe} \
ral \
${_ralfw} \
${_random_fortuna} \
${_random_yarrow} \
${_random_other} \
rc4 \
${_rdma} \
${_rdrand_rng} \
re \
rl \
rtwn \
rtwn_pci \
rtwn_usb \
${_rtwnfw} \
${_s3} \
${_safe} \
${_sbni} \
scc \
${_scsi_low} \
sdhci \
sdhci_pci \
sem \
send \
${_sf} \
${_sfxge} \
sge \
siba_bwn \
siftr \
siis \
sis \
sk \
smbfs \
sn \
${_snc} \
snp \
sound \
${_speaker} \
${_splash} \
${_sppp} \
ste \
${_stg} \
stge \
${_streams} \
${_svr4} \
${_sym} \
${_syscons} \
sysvipc \
${_ti} \
${_tcp_fastpath} \
tests/framework \
tests/callout_test \
tl \
tmpfs \
${_toecore} \
${_tpm} \
trm \
${_twa} \
twe \
tws \
tx \
${_txp} \
uart \
ubsec \
udf \
udf_iconv \
ufs \
uinput \
unionfs \
usb \
utopia \
${_vesa} \
${_virtio} \
vge \
${_viawd} \
videomode \
vkbd \
${_vmm} \
${_vmware} \
${_vpo} \
vr \
vte \
vx \
${_vxge} \
wb \
${_wbwd} \
${_wi} \
wlan \
wlan_acl \
wlan_amrr \
wlan_ccmp \
wlan_rssadapt \
wlan_tkip \
wlan_wep \
wlan_xauth \
${_wpi} \
${_wpifw} \
${_x86bios} \
${_xe} \
xl \
zlib
.if ${MK_AUTOFS} != "no" || defined(ALL_MODULES)
_autofs= autofs
.endif
.if ${MK_CDDL} != "no" || defined(ALL_MODULES)
.if (${MACHINE_CPUARCH} != "arm" || ${MACHINE_ARCH:Marmv6*} != "") && \
${MACHINE_CPUARCH} != "mips" && \
${MACHINE_CPUARCH} != "sparc64"
SUBDIR+= dtrace
.endif
SUBDIR+= opensolaris
.endif
.if ${MK_CRYPT} != "no" || defined(ALL_MODULES)
.if exists(${.CURDIR}/../opencrypto)
_crypto= crypto
_cryptodev= cryptodev
_random_fortuna=random_fortuna
_random_yarrow= random_yarrow
_random_other= random_other
.endif
.endif
.if ${MK_CUSE} != "no" || defined(ALL_MODULES)
SUBDIR+= cuse
.endif
.if ${MK_EXTRA_TCP_STACKS} != "no" || defined(ALL_MODULES)
_tcp_fastpath= tcp/fastpath
.endif
.if (${MK_INET_SUPPORT} != "no" || ${MK_INET6_SUPPORT} != "no") || \
defined(ALL_MODULES)
_carp= carp
_toecore= toecore
_if_enc= if_enc
_if_gif= if_gif
_if_gre= if_gre
.endif
.if (${MK_INET_SUPPORT} != "no" && ${MK_INET6_SUPPORT} != "no") || \
defined(ALL_MODULES)
_if_stf= if_stf
.endif
.if ${MK_INET_SUPPORT} != "no" || defined(ALL_MODULES)
_if_me= if_me
_ipdivert= ipdivert
_ipfw= ipfw
.if ${MK_INET6_SUPPORT} != "no" || defined(ALL_MODULES)
_ipfw_nat64= ipfw_nat64
.endif
.endif
.if ${MK_INET6_SUPPORT} != "no" || defined(ALL_MODULES)
_ipfw_nptv6= ipfw_nptv6
.endif
.if ${MK_IPFILTER} != "no" || defined(ALL_MODULES)
_ipfilter= ipfilter
.endif
.if ${MK_ISCSI} != "no" || defined(ALL_MODULES)
SUBDIR+= iscsi
SUBDIR+= iscsi_initiator
.endif
.if ${MK_NAND} != "no" || defined(ALL_MODULES)
_nandfs= nandfs
_nandsim= nandsim
.endif
.if ${MK_NETGRAPH} != "no" || defined(ALL_MODULES)
_netgraph= netgraph
.endif
.if (${MK_PF} != "no" && (${MK_INET_SUPPORT} != "no" || \
${MK_INET6_SUPPORT} != "no")) || defined(ALL_MODULES)
_pf= pf
_pflog= pflog
.if ${MK_INET_SUPPORT} != "no"
_pfsync= pfsync
.endif
.endif
.if ${MK_SOURCELESS_UCODE} != "no"
_bce= bce
_fatm= fatm
_fxp= fxp
_ispfw= ispfw
_mwlfw= mwlfw
_otusfw= otusfw
_ralfw= ralfw
_rtwnfw= rtwnfw
_sf= sf
_ti= ti
_txp= txp
.endif
.if ${MK_SOURCELESS_UCODE} != "no" && ${MACHINE_CPUARCH} != "arm" && \
${MACHINE_CPUARCH} != "mips" && \
${MACHINE_ARCH} != "powerpc" && ${MACHINE_ARCH} != "powerpcspe" && \
${MACHINE_CPUARCH} != "riscv"
_cxgbe= cxgbe
.endif
.if ${MK_ZFS} != "no" || defined(ALL_MODULES)
SUBDIR+= zfs
.endif
.if ${MACHINE_CPUARCH} != "aarch64" && ${MACHINE_CPUARCH} != "arm" && \
${MACHINE_CPUARCH} != "mips" && ${MACHINE_CPUARCH} != "powerpc" && \
${MACHINE_CPUARCH} != "riscv"
_syscons= syscons
_vpo= vpo
.endif
.if ${MACHINE_CPUARCH} != "mips"
# no BUS_SPACE_UNSPECIFIED
# No barrier instruction support (specific to this driver)
_sym= sym
# intr_disable() is a macro, causes problems
.if ${MK_SOURCELESS_UCODE} != "no"
_cxgb= cxgb
.endif
.endif
.if ${MACHINE_CPUARCH} == "aarch64"
_em= em
_igb= igb
.endif
.if ${MACHINE_CPUARCH} == "i386" || ${MACHINE_CPUARCH} == "amd64"
_agp= agp
_an= an
_aout= aout
_bktr= bktr
_bxe= bxe
_cardbus= cardbus
_cbb= cbb
_cpuctl= cpuctl
_cpufreq= cpufreq
_cs= cs
_dpms= dpms
_drm= drm
_drm2= drm2
_ed= ed
_em= em
_ep= ep
_et= et
_exca= exca
_fe= fe
.if ${MK_OFED} != "no" || defined(ALL_MODULES)
_ibcore= ibcore
.endif
_if_ndis= if_ndis
_igb= igb
_io= io
.if ${MK_OFED} != "no" || defined(ALL_MODULES)
_ipoib= ipoib
_iser= iser
.endif
_ix= ix
_ixv= ixv
_linprocfs= linprocfs
_linsysfs= linsysfs
_linux= linux
_nctgpio= nctgpio
_ndis= ndis
_pccard= pccard
.if ${MK_OFED} != "no" || defined(ALL_MODULES)
_rdma= rdma
.endif
_safe= safe
_scsi_low= scsi_low
_speaker= speaker
_splash= splash
_sppp= sppp
_vmware= vmware
_vxge= vxge
_wbwd= wbwd
_wi= wi
_xe= xe
.if ${MACHINE} != "pc98"
_aac= aac
_aacraid= aacraid
_acpi= acpi
.if ${MK_CRYPT} != "no" || defined(ALL_MODULES)
_aesni= aesni
.endif
_amdsbwd= amdsbwd
_amdtemp= amdtemp
_arcmsr= arcmsr
_asmc= asmc
_ciss= ciss
_chromebook_platform= chromebook_platform
_cmx= cmx
_coretemp= coretemp
.if ${MK_SOURCELESS_HOST} != "no"
_hpt27xx= hpt27xx
.endif
_hptiop= hptiop
.if ${MK_SOURCELESS_HOST} != "no"
_hptmv= hptmv
_hptnr= hptnr
_hptrr= hptrr
.endif
_hyperv= hyperv
_ichwd= ichwd
_ida= ida
_iir= iir
_ipmi= ipmi
_ips= ips
_isci= isci
_ipw= ipw
_iwi= iwi
_iwm= iwm
_iwn= iwn
_ixgb= ixgb
.if ${MK_SOURCELESS_UCODE} != "no"
_ipwfw= ipwfw
_iwifw= iwifw
_iwmfw= iwmfw
_iwnfw= iwnfw
.endif
_mlx4= mlx4
_mlx5= mlx5
.if (${MK_INET_SUPPORT} != "no" && ${MK_INET6_SUPPORT} != "no") || \
defined(ALL_MODULES)
_mlx4en= mlx4en
_mlx5en= mlx5en
.endif
.if ${MK_OFED} != "no" || defined(ALL_MODULES)
_mlx4ib= mlx4ib
.endif
_mly= mly
.if ${MK_OFED} != "no" || defined(ALL_MODULES)
_mthca= mthca
.endif
_nfe= nfe
_nvd= nvd
_nvme= nvme
_nvram= nvram
_nxge= nxge
.if ${MK_CRYPT} != "no" || defined(ALL_MODULES)
_padlock= padlock
_padlock_rng= padlock_rng
_rdrand_rng= rdrand_rng
.endif
_s3= s3
_tpm= tpm
_twa= twa
_vesa= vesa
_viawd= viawd
_virtio= virtio
_wpi= wpi
.if ${MK_SOURCELESS_UCODE} != "no"
_wpifw= wpifw
.endif
_x86bios= x86bios
.endif
.endif
.if ${MACHINE_CPUARCH} == "amd64"
_efirt= efirt
_ioat= ioat
_ixl= ixl
_ixlv= ixlv
_linux64= linux64
_linux_common= linux_common
_ntb= ntb
_pms= pms
_qlxge= qlxge
_qlxgb= qlxgb
_qlxgbe= qlxgbe
_sfxge= sfxge
.if ${MK_BHYVE} != "no" || defined(ALL_MODULES)
_vmm= vmm
.endif
.endif
.if ${MACHINE_CPUARCH} == "i386"
# XXX some of these can move to the general case when de-i386'ed
# XXX some of these can move now, but are untested on other architectures.
_3dfx= 3dfx
_3dfx_linux= 3dfx_linux
_aic= aic
_apm= apm
_arcnet= arcnet
.if ${MK_SOURCELESS_UCODE} != "no"
_ce= ce
.endif
_coff= coff
.if ${MK_SOURCELESS_UCODE} != "no"
_cp= cp
.endif
_elink= elink
_glxiic= glxiic
_glxsb= glxsb
#_ibcs2= ibcs2
_mse= mse
_ncr= ncr
_ncv= ncv
_nsp= nsp
_pcfclock= pcfclock
_pst= pst
_sbni= sbni
_streams= streams
_stg= stg
_svr4= svr4
.if ${MACHINE} == "i386"
.if ${MK_EISA} != "no"
_ahb= ahb
.endif
_bios= bios
_cm= cm
.if ${MK_SOURCELESS_UCODE} != "no"
_ctau= ctau
.endif
_dpt= dpt
_ex= ex
.elif ${MACHINE} == "pc98"
_canbepm= canbepm
_canbus= canbus
_ct= ct
_pmc= pmc
_snc= snc
.endif
.endif
.if ${MACHINE_CPUARCH} == "arm"
_cfi= cfi
_cpsw= cpsw
.endif
.if ${MACHINE_CPUARCH} == "powerpc"
_agp= agp
_an= an
_bm= bm
_cardbus= cardbus
_cbb= cbb
_cfi= cfi
_cpufreq= cpufreq
_drm= drm
_exca= exca
_pccard= pccard
_wi= wi
.endif
.if ${MACHINE_ARCH} == "powerpc64"
_drm2= drm2
.endif
.if ${MACHINE_ARCH} == "powerpc64" || ${MACHINE_ARCH} == "powerpc"
# Don't build powermac_nvram for powerpcspe, it's never supported.
_nvram= powermac_nvram
.endif
.if ${MACHINE_CPUARCH} == "sparc64"
_auxio= auxio
_em= em
_epic= epic
_igb= igb
.endif
.if (${MACHINE_CPUARCH} == "amd64" || ${MACHINE_ARCH} == "armv6" || \
${MACHINE_CPUARCH} == "i386")
_cloudabi32= cloudabi32
.endif
.if ${MACHINE_CPUARCH} == "aarch64" || ${MACHINE_CPUARCH} == "amd64"
_cloudabi64= cloudabi64
.endif
.endif
SUBDIR+=${MODULES_EXTRA}
.for reject in ${WITHOUT_MODULES}
SUBDIR:= ${SUBDIR:N${reject}}
.endfor
# Calling kldxref(8) for each module is expensive.
.if !defined(NO_XREF)
.MAKEFLAGS+= -DNO_XREF
afterinstall: .PHONY
@if type kldxref >/dev/null 2>&1; then \
${ECHO} kldxref ${DESTDIR}${KMODDIR}; \
kldxref ${DESTDIR}${KMODDIR}; \
fi
.endif
.include "${SYSDIR}/conf/config.mk"
SUBDIR:= ${SUBDIR:u:O}
.include <bsd.subdir.mk>
Reference in New Issue View Git Blame Copy Permalink