5c22d2a93f
(as given by "uname -m") by which you can specify which
architectures the port is appropriate for.
Idea borrowed from: NetBSD, OpenBSD
Reviewed by: simokawa
(2) New variable PERL_ARCH (value: ${ARCH}-freebsd) that is also
passed to ${PLIST_SUB}. Use it to simplify PLISTs.
Submitted by: simokawa
(3) Check OSVERSION as well as existence of /usr/bin/perl5 before
assuming USE_PERL5 is to be a no-op. Basically to allow building
of 2.2-INDEX on a 3.0 machine.
(4) Change USE_QT definition to use new shlib version (2) and
directory (qt142).
(5) Uncomment temporary Motif dependency for parallel package
building. We still need to figure out a way to install the pkg
database files, but it's a start.
(6) Move EXTRACT_SUFX up into the pre.mk area so it can be used in
exists() tests.
(7) Add MASTER_SITE_COMP_SOURCES. Note that this is defined like
"/pub/usenet/comp.sources.%SUBDIR%/" so you can specify something
like "SUBDIR=x/volume18" to select the newsgroup as well as
subdirectory name.
Submitted by: "distfiles" fenner
(8) Other misc. master site cleanup.
Submitted by: "distfiles" fenner
(9) New target "maintainer". I intend to use it to auto-mail failure
build failure notices to the maintainer.
2253 lines
70 KiB
Makefile
2253 lines
70 KiB
Makefile
#-*- mode: Fundamental; tab-width: 4; -*-
|
||
# ex:ts=4
|
||
#
|
||
# $Id: bsd.port.mk,v 1.300 1998/12/12 07:39:30 asami Exp $
|
||
# $NetBSD: $
|
||
#
|
||
# bsd.port.mk - 940820 Jordan K. Hubbard.
|
||
# This file is in the public domain.
|
||
#
|
||
# Please view me with 4 column tabs!
|
||
|
||
# There are two different types of "maintainers" in the whole ports
|
||
# framework concept. Maintainers of the bsd.port*.mk files
|
||
# are listed below in the ${OPSYS}_MAINTAINER entries (this file
|
||
# is used by multiple *BSD flavors). You should consult them directly
|
||
# if you have any questions/suggestions regarding this file since only
|
||
# they are allowed to modify the master copies in the CVS repository!
|
||
|
||
FreeBSD_MAINTAINER= asami@FreeBSD.ORG
|
||
OpenBSD_MAINTAINER= imp@OpenBSD.ORG
|
||
|
||
# For each port, the MAINTAINER variable is what you should consult for
|
||
# contact information on the person(s) to contact if you have questions/
|
||
# suggestions about that specific port. By default (if no MAINTAINER
|
||
# is listed), a port is maintained by the subscribers of the ports@freebsd.org
|
||
# mailing list, and any correspondece should be directed there.
|
||
#
|
||
# MAINTAINER - The e-mail address of the contact person for this port
|
||
# (default: ports@FreeBSD.ORG).
|
||
#
|
||
# These are meta-variables that are automatically set to the system
|
||
# you are running on.
|
||
#
|
||
# ARCH - The architecture, as returned by "uname -m".
|
||
# OPSYS - Portability clause. This is the operating system the
|
||
# makefile is being used on. Automatically set to
|
||
# "FreeBSD," "NetBSD," or "OpenBSD" as appropriate.
|
||
# OSREL - The release version (numeric) of the operating system.
|
||
# OSVERSION - The value of __FreeBSD_version.
|
||
# PORTOBJFORMAT - The object format ("aout" or "elf").
|
||
#
|
||
# These variables are used to identify your port.
|
||
#
|
||
# DISTNAME - Name of port or distribution.
|
||
# PKGNAME - Name of the package file to create if the DISTNAME
|
||
# isn't really relevant for the port/package
|
||
# (default: ${DISTNAME}).
|
||
# CATEGORIES - A list of descriptive categories into which this port falls.
|
||
#
|
||
# These variable describe how to fetch files required for building the port.
|
||
#
|
||
# DISTFILES - Name(s) of archive file(s) containing distribution
|
||
# (default: ${DISTNAME}${EXTRACT_SUFX}). Set this to
|
||
# an empty string if the port doesn't require it.
|
||
# EXTRACT_SUFX - Suffix for archive names (default: .tar.gz). You
|
||
# never have to set both DISTFILES and EXTRACT_SUFX.
|
||
# MASTER_SITES - Primary location(s) for distribution files if not found
|
||
# locally.
|
||
# PATCHFILES - Name(s) of additional files that contain distribution
|
||
# patches (default: none). make will look for them at
|
||
# PATCH_SITES (see below). They will automatically be
|
||
# uncompressed before patching if the names end with
|
||
# ".gz" or ".Z".
|
||
# PATCH_SITES - Primary location(s) for distribution patch files
|
||
# if not found locally.
|
||
# DIST_SUBDIR - Suffix to ${DISTDIR}. If set, all ${DISTFILES}
|
||
# and ${PATCHFILES} will be put in this subdirectory of
|
||
# ${DISTDIR} (see below). Also they will be fetched in
|
||
# this subdirectory from FreeBSD mirror sites.
|
||
# ALLFILES - All of ${DISTFILES} and ${PATCHFILES}.
|
||
# IGNOREFILES - If some of the ${ALLFILES} are not checksum-able, set
|
||
# this variable to their names.
|
||
# EXTRACT_ONLY - If defined, a subset of ${DISTFILES} you want to
|
||
# actually extract.
|
||
#
|
||
# These three variables are typically set in /etc/make.conf to indicate
|
||
# the user's preferred location to fetch files from.
|
||
#
|
||
# MASTER_SITE_BACKUP - Backup location(s) for distribution files and patch
|
||
# files if not found locally and ${MASTER_SITES}/${PATCH_SITES}
|
||
# (default:
|
||
# ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/)
|
||
# MASTER_SITE_OVERRIDE - If set, override the MASTER_SITES setting with this
|
||
# value.
|
||
# MASTER_SITE_FREEBSD - If set, only use ${MASTER_SITE_BACKUP} for
|
||
# MASTER_SITES.
|
||
#
|
||
# Set these if your port should not be built under certain circumstances.
|
||
# These are string variables; you should set them to the reason why
|
||
# they are necessary.
|
||
#
|
||
# RESTRICTED - Port is restricted (e.g., contains cryptography, etc.).
|
||
# NO_CDROM - Port may not go on CDROM.
|
||
# NO_PACKAGE - Port should not be packaged but distfiles can be put on
|
||
# ftp sites and CDROMs.
|
||
# BROKEN_ELF - Port doesn't build on ELF machines.
|
||
# BROKEN - Port is broken.
|
||
#
|
||
# This variable is a boolean, so you don't need to set it to the reason.
|
||
#
|
||
# IS_INTERACTIVE - Set this if your port needs to interact with the user
|
||
# during a build. User can then decide to skip this port by
|
||
# setting ${BATCH}, or compiling only the interactive ports
|
||
# by setting ${INTERACTIVE}.
|
||
#
|
||
# Set these if your port only makes sense to certain archetictures.
|
||
# They are lists containing names for them (e.g., "alpha i386").
|
||
#
|
||
# ONLY_FOR_ARCHS - Only build ports if ${ARCH} matches one of these.
|
||
# NOT_FOR_ARCHS - Only build ports if ${ARCH} doesn't match one of these.
|
||
#
|
||
# Use these if your port uses some of the common software packages.
|
||
#
|
||
# USE_GMAKE - Says that the port uses gmake.
|
||
# GMAKE - Set to path of GNU make if not in $PATH (default: gmake).
|
||
# USE_AUTOCONF - Says that the port uses autoconf. Implies GNU_CONFIGURE.
|
||
# AUTOCONF - Set to path of GNU autoconf if not in $PATH (default:
|
||
# autoconf).
|
||
# USE_PERL5 - Says that the port uses perl5 for building and running.
|
||
# PERL5 - Set to full path of perl5, either in the system or
|
||
# installed from a port.
|
||
# PERL - Set to full path of perl5, either in the system or
|
||
# installed from a port, but without the version number.
|
||
# Use this if you need to replace "#!" lines in scripts.
|
||
# PERL_VERSION - Full version of perl5 (see below for current value).
|
||
# PERL_VER - Short version of perl5 (see below for current value).
|
||
# PERL_ARCH - Directory name of architecture dependent libraries
|
||
# (value: ${ARCH}-freebsd).
|
||
# USE_IMAKE - Says that the port uses imake. Implies USE_X_PREFIX.
|
||
# XMKMF - Set to path of `xmkmf' if not in $PATH (default: xmkmf -a ).
|
||
# NO_INSTALL_MANPAGES - For imake ports that don't like the install.man
|
||
# target.
|
||
# USE_X_PREFIX - Says that the port installs in ${X11BASE}. Implies USE_XLIB.
|
||
# USE_XLIB - Says that the port uses X libraries.
|
||
# USE_QT - Says that the port uses the latest version of qt toolkit.
|
||
#
|
||
# Dependency checking. Use these if your port requires another port
|
||
# not in the list above.
|
||
#
|
||
# FETCH_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
|
||
# package depends in the "fetch" stage. "path" is the
|
||
# name of a file if it starts with a slash (/), an
|
||
# executable otherwise. make will test for the
|
||
# existence (if it is a full pathname) or search for
|
||
# it in your $PATH (if it is an executable) and go
|
||
# into "dir" to do a "make all install" if it's not
|
||
# found. If the third field ("target") exists, it will
|
||
# be used instead of ${DEPENDS_TARGET}.
|
||
# BUILD_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
|
||
# package depends to build (between the "extract" and
|
||
# "build" stages, inclusive). The test done to
|
||
# determine the existence of the dependency is the
|
||
# same as FETCH_DEPENDS. If the third field ("target")
|
||
# exists, it will be used instead of ${DEPENDS_TARGET}.
|
||
# RUN_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
|
||
# package depends to run. The test done to determine
|
||
# the existence of the dependency is the same as
|
||
# FETCH_DEPENDS. This will be checked during the
|
||
# "install" stage and the name of the dependency will
|
||
# be put into the package as well. If the third field
|
||
# ("target") exists, it will be used instead of
|
||
# ${DEPENDS_TARGET}.
|
||
# LIB_DEPENDS - A list of "lib:dir[:target]" tuples of other ports this
|
||
# package depends on. "lib" is the name of a shared library.
|
||
# make will use "ldconfig -r" to search for the
|
||
# library. Note that lib can not contain regular expressions.
|
||
# DEPENDS - A list of "dir[:target]" tuples of other ports this
|
||
# package depends on being made first. Use this only for
|
||
# things that don't fall into the above four categories.
|
||
# If the second field ("target") exists, it will be used
|
||
# instead of ${DEPENDS_TARGET}.
|
||
# DEPENDS_TARGET - The default target to execute when a port is calling a
|
||
# dependency (default: "install").
|
||
#
|
||
# Various directory definitions and variables to control them.
|
||
# You rarely need to redefine any of these except WRKSRC and NO_WRKSUBDIR.
|
||
#
|
||
# X11BASE - Where X11 ports install things (default: /usr/X11R6).
|
||
# LOCALBASE - Where non-X11 ports install things (default: /usr/local).
|
||
# PREFIX - Where *this* port installs its files (default: ${X11BASE}
|
||
# if USE_X_PREFIX is set, otherwise ${LOCALBASE}).
|
||
# MASTERDIR - Where the port finds patches, package files, etc. Define
|
||
# this is you have two or more ports that share most of the
|
||
# files (default: ${.CURDIR}).
|
||
# PORTSDIR - The root of the ports tree. Defaults:
|
||
# FreeBSD/OpenBSD: /usr/ports
|
||
# NetBSD: /usr/opt
|
||
# DISTDIR - Where to get gzip'd, tarballed copies of original sources
|
||
# (default: ${PORTSDIR}/distfiles).
|
||
# PACKAGES - A top level directory where all packages go (rather than
|
||
# going locally to each port). (default: ${PORTSDIR}/packages).
|
||
# WRKDIRPREFIX - The place to root the temporary working directory
|
||
# hierarchy (default: none).
|
||
# WRKDIR - A temporary working directory that gets *clobbered* on clean
|
||
# (default: ${WRKDIRPREFIX}${.CURDIR}/work).
|
||
# WRKSRC - A subdirectory of ${WRKDIR} where the distribution actually
|
||
# unpacks to. (Default: ${WRKDIR}/${DISTNAME} unless
|
||
# NO_WRKSUBDIR is set, in which case simply ${WRKDIR}).
|
||
# NO_WRKSUBDIR - Assume port unpacks directly into ${WRKDIR}.
|
||
# PATCHDIR - A directory containing any additional patches you made
|
||
# to port this software to FreeBSD (default:
|
||
# ${MASTERDIR}/patches)
|
||
# SCRIPTDIR - A directory containing any auxiliary scripts
|
||
# (default: ${MASTERDIR}/scripts)
|
||
# FILESDIR - A directory containing any miscellaneous additional files.
|
||
# (default: ${MASTERDIR}/files)
|
||
# PKGDIR - A direction containing any package creation files.
|
||
# (default: ${MASTERDIR}/pkg)
|
||
#
|
||
# Motif support:
|
||
#
|
||
# REQUIRES_MOTIF - Set this in your port if it requires Motif. It will be
|
||
# built only if HAVE_MOTIF is set.
|
||
# HAVE_MOTIF - If set, means system has Motif. Typically set in
|
||
# /etc/make.conf.
|
||
# MOTIF_STATIC - If set, link libXm statically; otherwise, link it
|
||
# dynamically. Typically set in /etc/make.conf.
|
||
# MOTIFLIB - Set automatically to appropriate value depending on
|
||
# ${MOTIF_STATIC}. Substitute references to -lXm with
|
||
# patches to make your port conform to our standards.
|
||
# MOTIF_ONLY - If set, build Motif ports only. (Not much use except for
|
||
# building packages.)
|
||
#
|
||
# Variables that serve as convenient "aliases" for your *-install targets.
|
||
# Use these like: "${INSTALL_PROGRAM} ${WRKSRC}/prog ${PREFIX}/bin".
|
||
#
|
||
# INSTALL_PROGRAM - A command to install binary executables.
|
||
# INSTALL_SCRIPT - A command to install executable scripts.
|
||
# INSTALL_DATA - A command to install sharable data.
|
||
# INSTALL_MAN - A command to install manpages (doesn't compress).
|
||
#
|
||
# Set the following to specify all manpages that your port installs.
|
||
# These manpages will be automatically listed in ${PLIST}. Depending
|
||
# on the setting of NOMANCOMPRESS, the make rules will compress the
|
||
# manpages for you.
|
||
#
|
||
# MAN<sect> - A list of manpages, categorized by section. For
|
||
# example, if your port has "man/man1/foo.1" and
|
||
# "man/mann/bar.n", set "MAN1=foo.1" and "MANN=bar.n".
|
||
# The available sections chars are "123456789LN".
|
||
# MLINKS - A list of <target, source> tuples for creating links
|
||
# for manpages. For example, "MLINKS= a.1 b.1 c.3 d.3"
|
||
# will do an "ln -sf a.1 b.1" and "ln -sf c.3 and d.3" in
|
||
# appropriate directories. (Use this even if the port
|
||
# installs its own manpage links so they will show up
|
||
# correctly in ${PLIST}.)
|
||
# MANPREFIX - The directory prefix for ${MAN<sect>} and ${MLINKS}
|
||
# (default: ${PREFIX}).
|
||
# MAN<sect>PREFIX - If manual pages of some sections install in different
|
||
# locations than others, use these (default: ${MANPREFIX}).
|
||
# MANCOMPRESSED - This variable can take values "yes", "no" or
|
||
# "maybe". "yes" means manpages are installed
|
||
# compressed; "no" means they are not; "maybe" means
|
||
# it changes depending on the value of
|
||
# NOMANCOMPRESS. The default is "yes" if USE_IMAKE
|
||
# is set and NO_INSTALL_MANPAGES is not set, and
|
||
# "no" otherwise.
|
||
#
|
||
# Default targets and their behaviors:
|
||
#
|
||
# fetch - Retrieves ${DISTFILES} (and ${PATCHFILES} if defined)
|
||
# into ${DISTDIR} as necessary.
|
||
# fetch-list - Show list of files that would be retrieved by fetch
|
||
# extract - Unpacks ${DISTFILES} into ${WRKDIR}.
|
||
# patch - Apply any provided patches to the source.
|
||
# configure - Runs either GNU configure, one or more local configure
|
||
# scripts or nothing, depending on what's available.
|
||
# build - Actually compile the sources.
|
||
# install - Install the results of a build.
|
||
# reinstall - Install the results of a build, ignoring "already installed"
|
||
# flag.
|
||
# deinstall - Remove the installation.
|
||
# package - Create a package from an _installed_ port.
|
||
# describe - Try to generate a one-line description for each port for
|
||
# use in INDEX files and the like.
|
||
# checkpatch - Do a "patch -C" instead of a "patch". Note that it may
|
||
# give incorrect results if multiple patches deal with
|
||
# the same file.
|
||
# checksum - Use files/md5 to ensure that your distfiles are valid.
|
||
# makesum - Generate files/md5 (only do this for your own ports!).
|
||
#
|
||
# Default sequence for "all" is: fetch checksum extract patch configure build
|
||
#
|
||
# Please read the comments in the targets section below, you
|
||
# should be able to use the pre-* or post-* targets/scripts
|
||
# (which are available for every stage except checksum) or
|
||
# override the do-* targets to do pretty much anything you want.
|
||
#
|
||
# NEVER override the "regular" targets unless you want to open
|
||
# a major can of worms.
|
||
#
|
||
# Set these variables if your port doesn't need some of the steps.
|
||
# Note that there are no NO_PATCH or NO_CONFIGURE variables becuase
|
||
# those steps are empty by default. NO_EXTRACT is not allowed anymore
|
||
# since we need to at least create ${WRKDIR}. Also, NO_CHECKSUM is a user
|
||
# variable and is not to be set in a port's Makefile. See above for NO_PACKAGE.
|
||
#
|
||
# NO_BUILD - Use a dummy (do-nothing) build target.
|
||
# NO_INSTALL - Use a dummy (do-nothing) install target.
|
||
#
|
||
# Here are some variables used in various stages.
|
||
#
|
||
# For fetch:
|
||
#
|
||
# FETCH_CMD - Full path to ftp/http fetch command if not in $PATH
|
||
# (default: /usr/bin/fetch).
|
||
# FETCH_BEFORE_ARGS -
|
||
# Arguments to ${FETCH_CMD} before filename (default: none).
|
||
# FETCH_AFTER_ARGS -
|
||
# Arguments to ${FETCH_CMD} following filename (default: none).
|
||
#
|
||
# For extract:
|
||
#
|
||
# EXTRACT_CMD - Command for extracting archive (default: tar).
|
||
# EXTRACT_BEFORE_ARGS -
|
||
# Arguments to ${EXTRACT_CMD} before filename
|
||
# (default: -xzf).
|
||
# EXTRACT_AFTER_ARGS -
|
||
# Arguments to ${EXTRACT_CMD} following filename
|
||
# (default: none).
|
||
#
|
||
# For configure:
|
||
#
|
||
# HAS_CONFIGURE - Says that the port has its own configure script. The
|
||
# configure stage will not do anything if this is not set.
|
||
# GNU_CONFIGURE - Set if you are using GNU configure (optional). Implies
|
||
# HAS_CONFIGURE.
|
||
# CONFIGURE_SCRIPT - Name of configure script (defaults: configure).
|
||
# CONFIGURE_ARGS - Pass these args to configure if ${HAS_CONFIGURE} is set.
|
||
# CONFIGURE_ENV - Pass these env (shell-like) to configure if
|
||
# ${HAS_CONFIGURE} is set.
|
||
#
|
||
# For build and install:
|
||
#
|
||
# MAKE_ENV - Additional environment vars passed to sub-make in build
|
||
# and install stages (default: see below).
|
||
# MAKE_ARGS - Any extra arguments to sub-make in build and install
|
||
# stages (default: none).
|
||
#
|
||
# For install:
|
||
#
|
||
# NO_MTREE - If set, will not invoke mtree from bsd.port.mk from
|
||
# the "install" target.
|
||
# MTREE_FILE - The name of the mtree file (default: /etc/mtree/BSD.x11.dist
|
||
# if USE_X_PREFIX is set, /etc/mtree/BSD.local.dist
|
||
# otherwise.)
|
||
# PLIST - Name of the `packing list' file (default: ${PKGDIR}/PLIST).
|
||
# Change this to ${WRKDIR}/PLIST or something if you
|
||
# need to write to it. (It is not a good idea for a port
|
||
# to write to any file outside ${WRKDIR} during a normal
|
||
# build.)
|
||
# TMPPLIST - Name of the `packing list' file after processing
|
||
# (default: ${WRKDIR}/.PLIST.mktmp).
|
||
# PLIST_SUB - List of "variable=value" pair for substitution in ${PLIST}
|
||
# (default: see below).
|
||
#
|
||
# Note that the install target will automatically add manpages (see
|
||
# above) and also substitute special sequences of characters (delimited
|
||
# by "%%") as defined in PLIST_SUB to generate ${TMPPLIST}. For
|
||
# instance, "OSREL=${OSREL}" in PLIST_SUB causes all occurrences of
|
||
# "%%OSREL%%" in ${PLIST} to be substituted by the value of OSREL.
|
||
# ${TMPPLIST} is generated between the do-install and post-install
|
||
# stages. If you are generating the packing list on-the-fly, make
|
||
# sure it's generated by the end of do-install!
|
||
#
|
||
# For package:
|
||
#
|
||
# NO_LATEST_LINK - Do not install the "Latest" link for package. Define this
|
||
# if this port is a beta version of another stable port
|
||
# which is also in the tree.
|
||
#
|
||
# This is used in all stages:
|
||
#
|
||
# SCRIPTS_ENV - Additional environment vars passed to scripts in
|
||
# ${SCRIPTDIR} executed by bsd.port.mk (default: see below).
|
||
#
|
||
# Finally, variables to change if you want a special behavior. These
|
||
# are for debugging purposes. Don't set them in your Makefile.
|
||
#
|
||
# ECHO_MSG - Used to print all the '===>' style prompts - override this
|
||
# to turn them off (default: /bin/echo).
|
||
# PATCH_DEBUG - If set, print out more information about the patches as
|
||
# it attempts to apply them.
|
||
# PKG_DBDIR - Where package installation is recorded (default: /var/db/pkg)
|
||
# NO_PKG_REGISTER - Don't register a port install as a package.
|
||
# FORCE_PKG_REGISTER - If set, it will overwrite any existing package
|
||
# registration information in ${PKG_DBDIR}/${PKGNAME}.
|
||
# NO_DEPENDS - Don't verify build of dependencies.
|
||
# NO_CHECKSUM - Don't verify the checksum. Typically used when
|
||
# when you noticed the distfile you just fetched has
|
||
# a different checksum and you intend to verify if
|
||
# the port still works with it.
|
||
|
||
# Start of pre-makefile section.
|
||
.if !defined(AFTERPORTMK)
|
||
|
||
# Get the architecture
|
||
.if !defined(ARCH)
|
||
ARCH!= /usr/bin/uname -m
|
||
.endif
|
||
|
||
# Get the operating system type
|
||
.if !defined(OPSYS)
|
||
OPSYS!= /usr/bin/uname -s
|
||
.endif
|
||
|
||
# Get the operating system revision
|
||
.if !defined(OSREL)
|
||
OSREL!= /usr/bin/uname -r | sed -e 's/[-(].*//'
|
||
.endif
|
||
|
||
# Get __FreeBSD_version
|
||
.if !defined(OSVERSION)
|
||
.if exists(/sbin/sysctl)
|
||
OSVERSION!= /sbin/sysctl -n kern.osreldate
|
||
.else
|
||
OSVERSION!= /usr/sbin/sysctl -n kern.osreldate
|
||
.endif
|
||
.endif
|
||
|
||
# Get the object format.
|
||
.if !defined(PORTOBJFORMAT)
|
||
PORTOBJFORMAT!= test -x /usr/bin/objformat && /usr/bin/objformat || echo aout
|
||
.endif
|
||
|
||
MASTERDIR?= ${.CURDIR}
|
||
|
||
# If they exist, include Makefile.inc, then architecture/operating
|
||
# system specific Makefiles, then local Makefile.local.
|
||
|
||
.if exists(${MASTERDIR}/../Makefile.inc)
|
||
.include "${MASTERDIR}/../Makefile.inc"
|
||
.endif
|
||
|
||
.if exists(${MASTERDIR}/Makefile.${ARCH}-${OPSYS})
|
||
.include "${MASTERDIR}/Makefile.${ARCH}-${OPSYS}"
|
||
.elif exists(${MASTERDIR}/Makefile.${OPSYS})
|
||
.include "${MASTERDIR}/Makefile.${OPSYS}"
|
||
.elif exists(${MASTERDIR}/Makefile.${ARCH})
|
||
.include "${MASTERDIR}/Makefile.${ARCH}"
|
||
.endif
|
||
|
||
.if exists(${MASTERDIR}/Makefile.local)
|
||
.include "${MASTERDIR}/Makefile.local"
|
||
.endif
|
||
|
||
# These need to be absolute since we don't know how deep in the ports
|
||
# tree we are and thus can't go relative. They can, of course, be overridden
|
||
# by individual Makefiles or local system make configuration.
|
||
.if (${OPSYS} == "NetBSD")
|
||
PORTSDIR?= /usr/opt
|
||
.else
|
||
PORTSDIR?= /usr/ports
|
||
.endif
|
||
LOCALBASE?= ${DESTDIR}/usr/local
|
||
X11BASE?= ${DESTDIR}/usr/X11R6
|
||
DISTDIR?= ${PORTSDIR}/distfiles
|
||
_DISTDIR?= ${DISTDIR}/${DIST_SUBDIR}
|
||
EXTRACT_SUFX?= .tar.gz
|
||
PACKAGES?= ${PORTSDIR}/packages
|
||
TEMPLATES?= ${PORTSDIR}/templates
|
||
|
||
.if exists(${MASTERDIR}/patches.${ARCH}-${OPSYS})
|
||
PATCHDIR?= ${MASTERDIR}/patches.${ARCH}-${OPSYS}
|
||
.elif exists(${MASTERDIR}/patches.${OPSYS})
|
||
PATCHDIR?= ${MASTERDIR}/patches.${OPSYS}
|
||
.elif exists(${MASTERDIR}/patches.${ARCH})
|
||
PATCHDIR?= ${MASTERDIR}/patches.${ARCH}
|
||
.else
|
||
PATCHDIR?= ${MASTERDIR}/patches
|
||
.endif
|
||
|
||
.if exists(${MASTERDIR}/scripts.${ARCH}-${OPSYS})
|
||
SCRIPTDIR?= ${MASTERDIR}/scripts.${ARCH}-${OPSYS}
|
||
.elif exists(${MASTERDIR}/scripts.${OPSYS})
|
||
SCRIPTDIR?= ${MASTERDIR}/scripts.${OPSYS}
|
||
.elif exists(${MASTERDIR}/scripts.${ARCH})
|
||
SCRIPTDIR?= ${MASTERDIR}/scripts.${ARCH}
|
||
.else
|
||
SCRIPTDIR?= ${MASTERDIR}/scripts
|
||
.endif
|
||
|
||
.if exists(${MASTERDIR}/files.${ARCH}-${OPSYS})
|
||
FILESDIR?= ${MASTERDIR}/files.${ARCH}-${OPSYS}
|
||
.elif exists(${MASTERDIR}/files.${OPSYS})
|
||
FILESDIR?= ${MASTERDIR}/files.${OPSYS}
|
||
.elif exists(${MASTERDIR}/files.${ARCH})
|
||
FILESDIR?= ${MASTERDIR}/files.${ARCH}
|
||
.else
|
||
FILESDIR?= ${MASTERDIR}/files
|
||
.endif
|
||
|
||
.if exists(${MASTERDIR}/pkg.${ARCH}-${OPSYS})
|
||
PKGDIR?= ${MASTERDIR}/pkg.${ARCH}-${OPSYS}
|
||
.elif exists(${MASTERDIR}/pkg.${OPSYS})
|
||
PKGDIR?= ${MASTERDIR}/pkg.${OPSYS}
|
||
.elif exists(${MASTERDIR}/pkg.${ARCH})
|
||
PKGDIR?= ${MASTERDIR}/pkg.${ARCH}
|
||
.else
|
||
PKGDIR?= ${MASTERDIR}/pkg
|
||
.endif
|
||
|
||
.if defined(USE_IMAKE)
|
||
USE_X_PREFIX= yes
|
||
.endif
|
||
.if defined(USE_X_PREFIX)
|
||
USE_XLIB= yes
|
||
.endif
|
||
.if defined(USE_X_PREFIX)
|
||
PREFIX?= ${X11BASE}
|
||
.else
|
||
PREFIX?= ${LOCALBASE}
|
||
.endif
|
||
|
||
.endif
|
||
# End of pre-makefile section.
|
||
|
||
# Start of post-makefile section.
|
||
.if !defined(BEFOREPORTMK)
|
||
|
||
WRKDIR?= ${WRKDIRPREFIX}${.CURDIR}/work
|
||
.if defined(NO_WRKSUBDIR)
|
||
WRKSRC?= ${WRKDIR}
|
||
.else
|
||
WRKSRC?= ${WRKDIR}/${DISTNAME}
|
||
.endif
|
||
|
||
PLIST_SUB+= OSREL=${OSREL}
|
||
|
||
CONFIGURE_ENV+= PORTOBJFORMAT=${PORTOBJFORMAT}
|
||
SCRIPTS_ENV+= PORTOBJFORMAT=${PORTOBJFORMAT}
|
||
MAKE_ENV+= PORTOBJFORMAT=${PORTOBJFORMAT}
|
||
PLIST_SUB+= PORTOBJFORMAT=${PORTOBJFORMAT}
|
||
|
||
.if defined(MANCOMPRESSED)
|
||
.if ${MANCOMPRESSED} != yes && ${MANCOMPRESSED} != no && \
|
||
${MANCOMPRESSED} != maybe
|
||
.BEGIN:
|
||
@${ECHO_MSG} "Error: Value of MANCOMPRESSED (is \"${MANCOMPRESSED}\") can only be \"yes\", \"no\" or \"maybe\"".
|
||
@${FALSE}
|
||
.endif
|
||
.endif
|
||
|
||
.if defined(USE_IMAKE) && ${OPSYS} != OpenBSD && !defined(NO_INSTALL_MANPAGES)
|
||
MANCOMPRESSED?= yes
|
||
.else
|
||
MANCOMPRESSED?= no
|
||
.endif
|
||
|
||
.if defined(USE_GMAKE)
|
||
BUILD_DEPENDS+= gmake:${PORTSDIR}/devel/gmake
|
||
.endif
|
||
.if defined(USE_AUTOCONF)
|
||
GNU_CONFIGURE= yes
|
||
BUILD_DEPENDS+= autoconf:${PORTSDIR}/devel/autoconf
|
||
.endif
|
||
|
||
.if defined(REQUIRES_MOTIF) && defined(PARALLEL_PACKAGE_BUILD)
|
||
BUILD_DEPENDS+= ${X11BASE}/lib/libXm.a:${PORTSDIR}/x11-toolkits/Motif-dummy
|
||
.endif
|
||
|
||
PERL_VERSION= 5.00502
|
||
PERL_VER= 5.005
|
||
PERL_ARCH= ${ARCH}-freebsd
|
||
PLIST_SUB+= PERL_VERSION=${PERL_VERSION} \
|
||
PERL_VER=${PERL_VER} \
|
||
PERL_ARCH=${PERL_ARCH}
|
||
|
||
.if exists(/usr/bin/perl5) && ${OSVERSION} >= 300000
|
||
# 3.0-current after perl5 import
|
||
.if !exists(/usr/bin/perl${PERL_VERSION}) && defined(USE_PERL5)
|
||
.BEGIN:
|
||
@${ECHO_MSG} "Error: you don't have the right version of perl in /usr/bin."
|
||
@${FALSE}
|
||
.endif
|
||
PERL5= /usr/bin/perl${PERL_VERSION}
|
||
PERL= /usr/bin/perl
|
||
.else
|
||
PERL5= ${LOCALBASE}/bin/perl${PERL_VERSION}
|
||
PERL= ${LOCALBASE}/bin/perl
|
||
.if defined(USE_PERL5)
|
||
BUILD_DEPENDS+= perl${PERL_VERSION}:${PORTSDIR}/lang/perl5
|
||
RUN_DEPENDS+= perl${PERL_VERSION}:${PORTSDIR}/lang/perl5
|
||
.endif
|
||
.endif
|
||
|
||
.if defined(USE_XLIB)
|
||
LIB_DEPENDS+= X11.6:${PORTSDIR}/x11/XFree86
|
||
.endif
|
||
|
||
.if defined(USE_QT)
|
||
LIB_DEPENDS+= qt.2:${PORTSDIR}/x11-toolkits/qt142
|
||
.endif
|
||
|
||
.if exists(${PORTSDIR}/../Makefile.inc)
|
||
.include "${PORTSDIR}/../Makefile.inc"
|
||
.endif
|
||
|
||
# Don't change these!!! These names are built into the _TARGET_USE macro,
|
||
# there is no way to refer to them cleanly from within the macro AFAIK.
|
||
EXTRACT_COOKIE?= ${WRKDIR}/.extract_done
|
||
CONFIGURE_COOKIE?= ${WRKDIR}/.configure_done
|
||
INSTALL_COOKIE?= ${WRKDIR}/.install_done
|
||
BUILD_COOKIE?= ${WRKDIR}/.build_done
|
||
PATCH_COOKIE?= ${WRKDIR}/.patch_done
|
||
PACKAGE_COOKIE?= ${WRKDIR}/.package_done
|
||
|
||
# How to do nothing. Override if you, for some strange reason, would rather
|
||
# do something.
|
||
DO_NADA?= /usr/bin/true
|
||
|
||
# Miscellaneous overridable commands:
|
||
GMAKE?= gmake
|
||
AUTOCONF?= autoconf
|
||
XMKMF?= xmkmf -a
|
||
.if exists(/sbin/md5)
|
||
MD5?= /sbin/md5
|
||
.elif exists(/bin/md5)
|
||
MD5?= /bin/md5
|
||
.elif exists(/usr/bin/md5)
|
||
MD5?= /usr/bin/md5
|
||
.else
|
||
MD5?= md5
|
||
.endif
|
||
MD5_FILE= ${FILESDIR}/md5
|
||
|
||
MAKE_FLAGS?= -f
|
||
MAKEFILE?= Makefile
|
||
MAKE_ENV+= PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE} MOTIFLIB="${MOTIFLIB}" CFLAGS="${CFLAGS}" LIBDIR="${LIBDIR}"
|
||
|
||
.if exists(/usr/bin/fetch)
|
||
FETCH_CMD?= /usr/bin/fetch
|
||
#FETCH_BEFORE_ARGS+= $${CKSIZE:+-S $$CKSIZE}
|
||
.else
|
||
FETCH_CMD?= /usr/bin/ftp
|
||
.endif
|
||
|
||
TOUCH?= /usr/bin/touch
|
||
TOUCH_FLAGS?= -f
|
||
|
||
PATCH?= /usr/bin/patch
|
||
PATCH_STRIP?= -p0
|
||
PATCH_DIST_STRIP?= -p0
|
||
.if defined(PATCH_DEBUG)
|
||
PATCH_DEBUG_TMP= yes
|
||
PATCH_ARGS?= -d ${WRKSRC} -E ${PATCH_STRIP}
|
||
PATCH_DIST_ARGS?= -d ${WRKSRC} -E ${PATCH_DIST_STRIP}
|
||
.else
|
||
PATCH_DEBUG_TMP= no
|
||
PATCH_ARGS?= -d ${WRKSRC} --forward --quiet -E ${PATCH_STRIP}
|
||
PATCH_DIST_ARGS?= -d ${WRKSRC} --forward --quiet -E ${PATCH_DIST_STRIP}
|
||
.endif
|
||
.if defined(BATCH)
|
||
PATCH_ARGS+= --batch
|
||
PATCH_DIST_ARGS+= --batch
|
||
.endif
|
||
|
||
.if defined(PATCH_CHECK_ONLY)
|
||
PATCH_ARGS+= -C
|
||
PATCH_DIST_ARGS+= -C
|
||
.endif
|
||
|
||
.if exists(/bin/tar)
|
||
EXTRACT_CMD?= /bin/tar
|
||
.else
|
||
EXTRACT_CMD?= /usr/bin/tar
|
||
.endif
|
||
# Backwards compatability.
|
||
.if defined(EXTRACT_ARGS)
|
||
EXTRACT_BEFORE_ARGS?= ${EXTRACT_ARGS}
|
||
.else
|
||
EXTRACT_BEFORE_ARGS?= -xzf
|
||
.endif
|
||
|
||
# Figure out where the local mtree file is
|
||
.if !defined(MTREE_FILE)
|
||
.if defined(USE_X_PREFIX)
|
||
MTREE_FILE= /etc/mtree/BSD.x11.dist
|
||
.else
|
||
MTREE_FILE= /etc/mtree/BSD.local.dist
|
||
.endif
|
||
.endif
|
||
MTREE_CMD?= /usr/sbin/mtree
|
||
MTREE_ARGS?= -U -f ${MTREE_FILE} -d -e -p
|
||
|
||
# A few aliases for *-install targets
|
||
INSTALL_PROGRAM= \
|
||
${INSTALL} ${COPY} ${STRIP} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}
|
||
INSTALL_SCRIPT= \
|
||
${INSTALL} ${COPY} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}
|
||
INSTALL_DATA= \
|
||
${INSTALL} ${COPY} -o ${SHAREOWN} -g ${SHAREGRP} -m ${SHAREMODE}
|
||
INSTALL_MAN= \
|
||
${INSTALL} ${COPY} -o ${MANOWN} -g ${MANGRP} -m ${MANMODE}
|
||
|
||
INSTALL_MACROS= BSD_INSTALL_PROGRAM="${INSTALL_PROGRAM}" \
|
||
BSD_INSTALL_SCRIPT="${INSTALL_SCRIPT}" \
|
||
BSD_INSTALL_DATA="${INSTALL_DATA}" \
|
||
BSD_INSTALL_MAN="${INSTALL_MAN}"
|
||
MAKE_ENV+= ${INSTALL_MACROS}
|
||
SCRIPTS_ENV+= ${INSTALL_MACROS}
|
||
|
||
# The user can override the NO_PACKAGE by specifying this from
|
||
# the make command line
|
||
.if defined(FORCE_PACKAGE)
|
||
.undef NO_PACKAGE
|
||
.endif
|
||
|
||
COMMENT?= ${PKGDIR}/COMMENT
|
||
DESCR?= ${PKGDIR}/DESCR
|
||
PLIST?= ${PKGDIR}/PLIST
|
||
TMPPLIST?= ${WRKDIR}/.PLIST.mktmp
|
||
PKGINSTALL?= ${PKGDIR}/INSTALL
|
||
PKGDEINSTALL?= ${PKGDIR}/DEINSTALL
|
||
PKGREQ?= ${PKGDIR}/REQ
|
||
PKGMESSAGE?= ${PKGDIR}/MESSAGE
|
||
|
||
PKG_CMD?= /usr/sbin/pkg_create
|
||
PKG_DELETE?= /usr/sbin/pkg_delete
|
||
.if !defined(PKG_ARGS)
|
||
PKG_ARGS= -v -c ${COMMENT} -d ${DESCR} -f ${TMPPLIST} -p ${PREFIX} -P "`${MAKE} package-depends|sort -u`" ${EXTRA_PKG_ARGS}
|
||
.if exists(${PKGINSTALL})
|
||
PKG_ARGS+= -i ${PKGINSTALL}
|
||
.endif
|
||
.if exists(${PKGDEINSTALL})
|
||
PKG_ARGS+= -k ${PKGDEINSTALL}
|
||
.endif
|
||
.if exists(${PKGREQ})
|
||
PKG_ARGS+= -r ${PKGREQ}
|
||
.endif
|
||
.if exists(${PKGMESSAGE})
|
||
PKG_ARGS+= -D ${PKGMESSAGE}
|
||
.endif
|
||
.if !defined(NO_MTREE)
|
||
PKG_ARGS+= -m ${MTREE_FILE}
|
||
.endif
|
||
.endif
|
||
.if defined(PKG_NOCOMPRESS)
|
||
PKG_SUFX?= .tar
|
||
.else
|
||
PKG_SUFX?= .tgz
|
||
.endif
|
||
# where pkg_add records its dirty deeds.
|
||
PKG_DBDIR?= /var/db/pkg
|
||
|
||
# shared/dynamic motif libs
|
||
.if defined(HAVE_MOTIF)
|
||
.if defined(MOTIF_STATIC)
|
||
MOTIFLIB?= ${X11BASE}/lib/libXm.a
|
||
.else
|
||
MOTIFLIB?= -L${X11BASE}/lib -lXm
|
||
.endif
|
||
.endif
|
||
|
||
AWK?= /usr/bin/awk
|
||
BASENAME?= /usr/bin/basename
|
||
CAT?= /bin/cat
|
||
CP?= /bin/cp
|
||
ECHO?= /bin/echo
|
||
EXPR?= /bin/expr
|
||
FALSE?= /usr/bin/false
|
||
GREP?= /usr/bin/grep
|
||
GUNZIP_CMD?= /usr/bin/gunzip -f
|
||
GZCAT?= /usr/bin/gzcat
|
||
GZIP?= -9
|
||
GZIP_CMD?= /usr/bin/gzip -nf ${GZIP}
|
||
LDCONFIG?= /sbin/ldconfig
|
||
LN?= /bin/ln
|
||
MKDIR?= /bin/mkdir -p
|
||
MV?= /bin/mv
|
||
RM?= /bin/rm
|
||
RMDIR?= /bin/rmdir
|
||
SED?= /usr/bin/sed
|
||
SETENV?= /usr/bin/env
|
||
SH?= /bin/sh
|
||
TR?= /usr/bin/tr
|
||
TRUE?= /usr/bin/true
|
||
|
||
# Used to print all the '===>' style prompts - override this to turn them off.
|
||
ECHO_MSG?= ${ECHO}
|
||
|
||
.for sub in ${PLIST_SUB}
|
||
_sedsubplist!= sym=`${ECHO} "${sub}" | ${SED} -e 's/=.*//'`; \
|
||
val=`${ECHO} "${sub}" | ${SED} -e 's/^[^=][^=]*=//'`; \
|
||
echo "${_sedsubplist} -e s!%%$${sym}%%!$${val}!g"
|
||
.endfor
|
||
|
||
ALL_TARGET?= all
|
||
INSTALL_TARGET?= install
|
||
|
||
# Popular master sites
|
||
MASTER_SITE_XCONTRIB+= \
|
||
ftp://crl.dec.com/pub/X11/contrib/%SUBDIR%/ \
|
||
ftp://ftp.eu.net/X11/contrib/%SUBDIR%/
|
||
|
||
MASTER_SITE_GNU+= \
|
||
ftp://prep.ai.mit.edu/pub/gnu/%SUBDIR%/ \
|
||
ftp://wuarchive.wustl.edu/systems/gnu/%SUBDIR%/ \
|
||
ftp://ftp.kddlabs.co.jp/pub/gnu/%SUBDIR%/ \
|
||
ftp://ftp.digex.net/pub/gnu/%SUBDIR%/ \
|
||
ftp://ftp.univ-evry.fr/pub/gnu/%SUBDIR%/ \
|
||
ftp://ftp.cdrom.com/pub/gnu/%SUBDIR%/ \
|
||
ftp://ftp.duke.edu/pub/gnu/%SUBDIR%/ \
|
||
ftp://ftp.gamma.ru/pub/gnu/%SUBDIR%/ \
|
||
ftp://ftp.nihon-u.ac.jp/pub/gnu/%SUBDIR%/
|
||
|
||
MASTER_SITE_PERL_CPAN+= \
|
||
ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/%SUBDIR%/ \
|
||
ftp://ftp.cdrom.com/pub/perl/CPAN/modules/by-module/%SUBDIR%/
|
||
|
||
MASTER_SITE_TEX_CTAN+= \
|
||
ftp://ftp.cdrom.com/pub/tex/ctan/%SUBDIR%/ \
|
||
ftp://wuarchive.wustl.edu/packages/TeX/%SUBDIR%/ \
|
||
ftp://ftp.funet.fi/pub/TeX/CTAN/%SUBDIR%/ \
|
||
ftp://ftp.tex.ac.uk/tex-archive/%SUBDIR%/ \
|
||
ftp://ftp.dante.de/tex-archive/%SUBDIR%/
|
||
|
||
MASTER_SITE_SUNSITE+= \
|
||
ftp://sunsite.unc.edu/pub/Linux/%SUBDIR%/ \
|
||
ftp://ftp.infomagic.com/pub/mirrors/linux/sunsite/%SUBDIR%/ \
|
||
ftp://ftp.funet.fi/pub/mirrors/sunsite.unc.edu/pub/Linux/%SUBDIR%/
|
||
|
||
MASTER_SITE_KDE+= \
|
||
ftp://ftp.us.kde.org/pub/kde/%SUBDIR%/ \
|
||
ftp://ftp.kde.org/pub/kde/%SUBDIR%/ \
|
||
ftp://ftp.tuniv.szczecin.pl/pub/kde/%SUBDIR%/ \
|
||
ftp://ftp.fu-berlin.de/pub/unix/X11/gui/kde/%SUBDIR%/ \
|
||
ftp://ftp.dataplus.se/pub/linux/kde/%SUBDIR%/
|
||
|
||
MASTER_SITE_COMP_SOURCES+= \
|
||
ftp://gatekeeper.dec.com/pub/usenet/comp.sources.%SUBDIR%/ \
|
||
ftp://ftp.uu.net/usenet/comp.sources.%SUBDIR%/ \
|
||
ftp://rtfm.mit.edu/pub/usenet/comp.sources.%SUBDIR%/
|
||
|
||
# Empty declaration to avoid "variable MASTER_SITES recursive" error
|
||
MASTER_SITES?=
|
||
PATCH_SITES?=
|
||
|
||
# To avoid double-slashes
|
||
MASTER_SITE_SUBDIR?= .
|
||
PATCH_SITE_SUBDIR?= .
|
||
|
||
# Substitute subdirectory names
|
||
MASTER_SITES:= ${MASTER_SITES:S/%SUBDIR%/${MASTER_SITE_SUBDIR}/}
|
||
PATCH_SITES:= ${PATCH_SITES:S/%SUBDIR%/${PATCH_SITE_SUBDIR}/}
|
||
|
||
# The primary backup site.
|
||
MASTER_SITE_BACKUP?= \
|
||
ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/
|
||
|
||
# If the user has this set, go to the FreeBSD repository for everything.
|
||
.if defined(MASTER_SITE_FREEBSD)
|
||
MASTER_SITE_OVERRIDE= ${MASTER_SITE_BACKUP}
|
||
.endif
|
||
|
||
# Where to put distfiles that don't have any other master site
|
||
MASTER_SITE_LOCAL?= \
|
||
ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/LOCAL_PORTS/
|
||
|
||
# I guess we're in the master distribution business! :) As we gain mirror
|
||
# sites for distfiles, add them to this list.
|
||
.if !defined(MASTER_SITE_OVERRIDE)
|
||
MASTER_SITES+= ${MASTER_SITE_BACKUP}
|
||
PATCH_SITES+= ${MASTER_SITE_BACKUP}
|
||
.else
|
||
MASTER_SITES:= ${MASTER_SITE_OVERRIDE} ${MASTER_SITES}
|
||
PATCH_SITES:= ${MASTER_SITE_OVERRIDE} ${PATCH_SITES}
|
||
.endif
|
||
|
||
# Search CDROM first if mounted, symlink instead of copy if
|
||
# FETCH_SYMLINK_DISTFILES is set
|
||
CD_MOUNTPT?= /cdrom
|
||
.if exists(${CD_MOUNTPT}/ports/distfiles)
|
||
MASTER_SITES:= file:${CD_MOUNTPT}/ports/distfiles/${DIST_SUBDIR}/ ${MASTER_SITES}
|
||
PATCH_SITES:= file:${CD_MOUNTPT}/ports/distfiles/${DIST_SUBDIR}/ ${PATCH_SITES}
|
||
.if defined(FETCH_SYMLINK_DISTFILES)
|
||
FETCH_BEFORE_ARGS+= -l
|
||
.endif
|
||
.endif
|
||
|
||
# Derived names so that they're easily overridable.
|
||
DISTFILES?= ${DISTNAME}${EXTRACT_SUFX}
|
||
PKGNAME?= ${DISTNAME}
|
||
|
||
ALLFILES?= ${DISTFILES} ${PATCHFILES}
|
||
|
||
.if defined(IGNOREFILES)
|
||
CKSUMFILES!= \
|
||
for file in ${ALLFILES}; do \
|
||
ignore=0; \
|
||
for tmp in ${IGNOREFILES}; do \
|
||
if [ "$$file" = "$$tmp" ]; then \
|
||
ignore=1; \
|
||
fi; \
|
||
done; \
|
||
if [ "$$ignore" = 0 ]; then \
|
||
echo "$$file"; \
|
||
fi; \
|
||
done
|
||
.else
|
||
CKSUMFILES= ${ALLFILES}
|
||
.endif
|
||
|
||
# List of all files, with ${DIST_SUBDIR} in front. Used for checksum.
|
||
.if defined(DIST_SUBDIR)
|
||
_CKSUMFILES?= ${CKSUMFILES:S/^/${DIST_SUBDIR}\//}
|
||
_IGNOREFILES?= ${IGNOREFILES:S/^/${DIST_SUBDIR}\//}
|
||
.else
|
||
_CKSUMFILES?= ${CKSUMFILES}
|
||
_IGNOREFILES?= ${IGNOREFILES}
|
||
.endif
|
||
|
||
# This is what is actually going to be extracted, and is overridable
|
||
# by user.
|
||
EXTRACT_ONLY?= ${DISTFILES}
|
||
|
||
# Documentation
|
||
MAINTAINER?= ports@FreeBSD.ORG
|
||
|
||
.if !target(maintainer)
|
||
maintainer:
|
||
@${ECHO} ${MAINTAINER}
|
||
.endif
|
||
|
||
.if !defined(CATEGORIES)
|
||
.BEGIN:
|
||
@${ECHO_MSG} "CATEGORIES is mandatory."
|
||
@${FALSE}
|
||
.endif
|
||
|
||
# Note this has to start with a capital letter (or more accurately, it
|
||
# shouldn't match "[a-z]*"), see the target "delete-package-links" below.
|
||
PKGREPOSITORYSUBDIR?= All
|
||
PKGREPOSITORY?= ${PACKAGES}/${PKGREPOSITORYSUBDIR}
|
||
.if exists(${PACKAGES})
|
||
PKGFILE?= ${PKGREPOSITORY}/${PKGNAME}${PKG_SUFX}
|
||
.else
|
||
PKGFILE?= ${.CURDIR}/${PKGNAME}${PKG_SUFX}
|
||
.endif
|
||
|
||
# The "latest version" link -- ${PKGNAME} minus everthing after the last '-'
|
||
PKGLATESTREPOSITORY?= ${PACKAGES}/Latest
|
||
PKGBASE!= ${ECHO} ${PKGNAME} | ${SED} -e 's/-[^-]*$$//'
|
||
PKGLATESTFILE?= ${PKGLATESTREPOSITORY}/${PKGBASE}${PKG_SUFX}
|
||
|
||
CONFIGURE_SCRIPT?= configure
|
||
|
||
.if defined(GNU_CONFIGURE)
|
||
CONFIGURE_ARGS+= --prefix=${PREFIX}
|
||
HAS_CONFIGURE= yes
|
||
.endif
|
||
|
||
# Passed to most of script invocations
|
||
SCRIPTS_ENV+= CURDIR=${MASTERDIR} DISTDIR=${DISTDIR} \
|
||
WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} \
|
||
SCRIPTDIR=${SCRIPTDIR} FILESDIR=${FILESDIR} \
|
||
PORTSDIR=${PORTSDIR} DEPENDS="${DEPENDS}" \
|
||
PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE}
|
||
|
||
.if defined(BATCH)
|
||
SCRIPTS_ENV+= BATCH=yes
|
||
.endif
|
||
|
||
MANPREFIX?= ${PREFIX}
|
||
|
||
.for sect in 1 2 3 4 5 6 7 8 9
|
||
MAN${sect}PREFIX?= ${MANPREFIX}
|
||
.endfor
|
||
MANLPREFIX?= ${MANPREFIX}
|
||
MANNPREFIX?= ${MANPREFIX}
|
||
|
||
MANLANG?= "" # english only by default
|
||
|
||
.if !defined(NOMANCOMPRESS)
|
||
MANEXT= .gz
|
||
.endif
|
||
|
||
.if defined(MLINKS)
|
||
__pmlinks!= ${ECHO} '${MLINKS:S/ / /}' | ${AWK} \
|
||
'{ if (NF % 2 != 0) { print "broken"; exit; } \
|
||
for (i=1; i<=NF; i++) { \
|
||
if ($$i ~ /^-$$/ && i != 1 && i % 2 != 0) \
|
||
{ $$i = $$(i-2); printf " " $$i " "; } \
|
||
else if ($$i ~ /^[^ ]+\.[1-9ln][^. ]*$$/ || $$i ~ /^\//) \
|
||
printf " " $$i " "; \
|
||
else \
|
||
{ print "broken"; exit; } \
|
||
} \
|
||
}' | ${SED} -e 's/ \/[^ ]*/ &x/g' -e 's/ [^/ ][^ ]*\.\(.\)[^. ]*/ &\1/g'
|
||
.if ${__pmlinks:Mbroken} == "broken"
|
||
.BEGIN:
|
||
@${ECHO_MSG} "Error: Unable to parse MLINKS."
|
||
@${FALSE}
|
||
.endif
|
||
.endif
|
||
|
||
.for lang in ${MANLANG}
|
||
|
||
.for sect in 1 2 3 4 5 6 7 8 9
|
||
.if defined(MAN${sect})
|
||
_MANPAGES+= ${MAN${sect}:S%^%${MAN${sect}PREFIX}/man/${lang}/man${sect}/%}
|
||
.endif
|
||
.endfor
|
||
|
||
.if defined(MANL)
|
||
_MANPAGES+= ${MANL:S%^%${MANLPREFIX}/man/${lang}/manl/%}
|
||
.endif
|
||
|
||
.if defined(MANN)
|
||
_MANPAGES+= ${MANN:S%^%${MANNPREFIX}/man/${lang}/mann/%}
|
||
.endif
|
||
|
||
.if defined(MLINKS)
|
||
.for __page in ${__pmlinks}
|
||
__name= ${__page:S// /:N[1-9lnx]}
|
||
__sect= ${__page:S// /:M[1-9lnx]}
|
||
.if ${__name:M/*}x == x
|
||
_MLINKS+= ${MAN${__sect:S/l/L/:S/n/N/}PREFIX}/man/${lang}/man${__sect}/${__name}${MANEXT}
|
||
.else
|
||
_MLINKS+= ${__name}${MANEXT}
|
||
.endif
|
||
_MLINKS:= ${_MLINKS}
|
||
.endfor
|
||
.endif
|
||
|
||
.endfor lang in ${MANLANG}
|
||
|
||
_TMLINKS!= ${ECHO} ${_MLINKS} | ${AWK} '{for (i=2; i<=NF; i+=2) print $$i}'
|
||
|
||
.if defined(_MANPAGES) && defined(NOMANCOMPRESS)
|
||
__MANPAGES:= ${_MANPAGES:S^${PREFIX}/^^:S/""//:S^//^/^g}
|
||
.elif defined(_MANPAGES)
|
||
__MANPAGES:= ${_MANPAGES:S^${PREFIX}/^^:S/""//:S^//^/^g:S/$/.gz/}
|
||
.endif
|
||
|
||
.if defined(_MANPAGES) && ${MANCOMPRESSED} == "yes"
|
||
_MANPAGES:= ${_MANPAGES:S/$/.gz/}
|
||
.endif
|
||
|
||
.MAIN: all
|
||
|
||
################################################################
|
||
# Many ways to disable a port.
|
||
#
|
||
# If we're in BATCH mode and the port is interactive, or we're
|
||
# in interactive mode and the port is non-interactive, skip all
|
||
# the important targets. The reason we have two modes is that
|
||
# one might want to leave a build in BATCH mode running
|
||
# overnight, then come back in the morning and do _only_ the
|
||
# interactive ones that required your intervention.
|
||
#
|
||
# Don't attempt to build ports that require Motif if you don't
|
||
# have Motif.
|
||
#
|
||
# Ignore ports that can't be resold if building for a CDROM.
|
||
#
|
||
# Don't build a port if it's restricted and we don't want to get
|
||
# into that.
|
||
#
|
||
# Don't build a port on an ELF machine if it's broken for ELF.
|
||
#
|
||
# Don't build a port if it's broken.
|
||
################################################################
|
||
|
||
OLDSYSTCL!= ${ECHO} /usr/include/tcl.h /usr/lib/libtcl??.so.*.*
|
||
OLDTCL= ${LOCALBASE}/include/tcl.h ${LOCALBASE}/lib/tclConfig.sh
|
||
OLDTK= ${LOCALBASE}/include/tk.h ${LOCALBASE}/lib/tkConfig.sh
|
||
|
||
.if !defined(NO_IGNORE)
|
||
.for file in ${OLDSYSTCL} ${OLDTCL}
|
||
.if exists(${file})
|
||
IGNORE= ": You have an old file \(${file}\) that could cause problems for some ports to compile. Please remove it and try again. You may have to reinstall tcl from the ports tree afterwards"
|
||
.endif
|
||
.endfor
|
||
.for file in ${OLDTK}
|
||
.if exists(${file})
|
||
IGNORE= ": You have an old file \(${file}\) that could cause problems for some ports to compile. Please remove it and try again. You may have to reinstall tk from the ports tree afterwards"
|
||
.endif
|
||
.endfor
|
||
.endif
|
||
|
||
.if defined(ONLY_FOR_ARCHS)
|
||
.for __ARCH in ${ONLY_FOR_ARCHS}
|
||
.if ${MACHINE_ARCH:M${__ARCH}} != ""
|
||
__ARCH_OK?= 1
|
||
.endif
|
||
.endfor
|
||
.else
|
||
__ARCH_OK?= 1
|
||
.endif
|
||
|
||
.if defined(NOT_FOR_ARCHS)
|
||
.for __NARCH in ${NOT_FOR_ARCHS}
|
||
.if ${MACHINE_ARCH:M${__NARCH}} != ""
|
||
.undef __ARCH_OK
|
||
.endif
|
||
.endfor
|
||
.endif
|
||
|
||
.if !defined(__ARCH_OK)
|
||
.if defined(ONLY_FOR_ARCHS)
|
||
IGNORE= "is only for ${ONLY_FOR_ARCHS},"
|
||
.else # defined(NOT_FOR_ARCHS)
|
||
IGNORE= "does not run on ${NOT_FOR_ARCHS},"
|
||
.endif
|
||
IGNORE+= "and you are running ${ARCH}"
|
||
.endif
|
||
|
||
.if !defined(NO_IGNORE)
|
||
.if (defined(IS_INTERACTIVE) && defined(BATCH))
|
||
IGNORE= "is an interactive port"
|
||
.elif (!defined(IS_INTERACTIVE) && defined(INTERACTIVE))
|
||
IGNORE= "is not an interactive port"
|
||
.elif (defined(REQUIRES_MOTIF) && !defined(HAVE_MOTIF))
|
||
IGNORE= "requires Motif"
|
||
.elif (defined(MOTIF_ONLY) && !defined(REQUIRES_MOTIF))
|
||
IGNORE= "does not require Motif"
|
||
.elif (defined(NO_CDROM) && defined(FOR_CDROM))
|
||
IGNORE= "may not be placed on a CDROM: ${NO_CDROM}"
|
||
.elif (defined(RESTRICTED) && defined(NO_RESTRICTED))
|
||
IGNORE= "is restricted: ${RESTRICTED}"
|
||
.elif defined(NO_WRKDIR)
|
||
IGNORE= "defines NO_WRKDIR, which is obsoleted. If you are defining NO_WRKDIR and NO_EXTRACT, try changing it to NO_WRKSUBDIR=yes and EXTRACT_ONLY= \(the right side intentionally left empty\)"
|
||
.elif defined(NO_EXTRACT)
|
||
IGNORE= "defines NO_EXTRACT, which is obsoleted. Try changing it to EXTRACT_ONLY= \(the right side intentionally left empty\)"
|
||
.elif defined(NO_CONFIGURE)
|
||
IGNORE= "defines NO_CONFIGURE, which is obsoleted"
|
||
.elif defined(NO_PATCH)
|
||
IGNORE= "defines NO_PATCH, which is obsoleted"
|
||
.elif (defined(BROKEN_ELF) && (${PORTOBJFORMAT} == "elf"))
|
||
IGNORE= "is broken for ELF: ${BROKEN_ELF}"
|
||
.elif defined(BROKEN)
|
||
IGNORE= "is marked as broken: ${BROKEN}"
|
||
.endif
|
||
|
||
.if (defined(MANUAL_PACKAGE_BUILD) && defined(PACKAGE_BUILDING) && !defined(PARALLEL_PACKAGE_BUILD))
|
||
IGNORE= "has to be built manually: ${MANUAL_PACKAGE_BUILD}"
|
||
clean:
|
||
@${IGNORECMD}
|
||
.endif
|
||
|
||
.if defined(IGNORE)
|
||
.if defined(IGNORE_SILENT)
|
||
IGNORECMD= ${DO_NADA}
|
||
.else
|
||
IGNORECMD= ${ECHO_MSG} "===> ${PKGNAME} ${IGNORE}."
|
||
.endif
|
||
fetch:
|
||
@${IGNORECMD}
|
||
checksum:
|
||
@${IGNORECMD}
|
||
extract:
|
||
@${IGNORECMD}
|
||
patch:
|
||
@${IGNORECMD}
|
||
configure:
|
||
@${IGNORECMD}
|
||
all:
|
||
@${IGNORECMD}
|
||
build:
|
||
@${IGNORECMD}
|
||
install:
|
||
@${IGNORECMD}
|
||
reinstall:
|
||
@${IGNORECMD}
|
||
package:
|
||
@${IGNORECMD}
|
||
.endif
|
||
|
||
.endif
|
||
|
||
.if defined(IGNORE) || defined(NO_PACKAGE)
|
||
ignorelist: package-name
|
||
.else
|
||
ignorelist:
|
||
@${DO_NADA}
|
||
.endif
|
||
|
||
################################################################
|
||
# Clean directories for ftp or CDROM.
|
||
################################################################
|
||
|
||
.if defined(RESTRICTED)
|
||
clean-restricted: delete-distfiles delete-package
|
||
.else
|
||
clean-restricted:
|
||
.endif
|
||
|
||
.if defined(NO_CDROM)
|
||
clean-for-cdrom: delete-distfiles delete-package
|
||
.else
|
||
clean-for-cdrom:
|
||
.endif
|
||
|
||
.if defined(ALL_HOOK)
|
||
all:
|
||
@cd ${.CURDIR} && ${SETENV} CURDIR=${.CURDIR} DISTNAME=${DISTNAME} \
|
||
DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} \
|
||
PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \
|
||
FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \
|
||
DEPENDS="${DEPENDS}" BUILD_DEPENDS="${BUILD_DEPENDS}" \
|
||
RUN_DEPENDS="${RUN_DEPENDS}" X11BASE=${X11BASE} \
|
||
${ALL_HOOK}
|
||
.endif
|
||
|
||
.if !target(all)
|
||
all: build
|
||
.endif
|
||
|
||
.if !defined(DEPENDS_TARGET)
|
||
.if make(reinstall)
|
||
DEPENDS_TARGET= reinstall
|
||
.else
|
||
DEPENDS_TARGET= install
|
||
.endif
|
||
.endif
|
||
|
||
################################################################
|
||
# The following are used to create easy dummy targets for
|
||
# disabling some bit of default target behavior you don't want.
|
||
# They still check to see if the target exists, and if so don't
|
||
# do anything, since you might want to set this globally for a
|
||
# group of ports in a Makefile.inc, but still be able to
|
||
# override from an individual Makefile.
|
||
################################################################
|
||
|
||
# Disable checksum
|
||
.if defined(NO_CHECKSUM) && !target(checksum)
|
||
checksum: fetch
|
||
@${DO_NADA}
|
||
.endif
|
||
|
||
# Disable build
|
||
.if defined(NO_BUILD) && !target(build)
|
||
build: configure
|
||
@${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE}
|
||
.endif
|
||
|
||
# Disable install
|
||
.if defined(NO_INSTALL) && !target(install)
|
||
install: build
|
||
@${TOUCH} ${TOUCH_FLAGS} ${INSTALL_COOKIE}
|
||
.endif
|
||
|
||
# Disable package
|
||
.if defined(NO_PACKAGE) && !target(package)
|
||
package:
|
||
.if defined(IGNORE_SILENT)
|
||
@${DO_NADA}
|
||
.else
|
||
@${ECHO_MSG} "===> ${PKGNAME} may not be packaged: ${NO_PACKAGE}."
|
||
.endif
|
||
.endif
|
||
|
||
# Disable describe
|
||
.if defined(NO_DESCRIBE) && !target(describe)
|
||
describe:
|
||
@${DO_NADA}
|
||
.endif
|
||
|
||
################################################################
|
||
# More standard targets start here.
|
||
#
|
||
# These are the body of the build/install framework. If you are
|
||
# not happy with the default actions, and you can't solve it by
|
||
# adding pre-* or post-* targets/scripts, override these.
|
||
################################################################
|
||
|
||
# Fetch
|
||
|
||
.if !target(do-fetch)
|
||
do-fetch:
|
||
@${MKDIR} ${_DISTDIR}
|
||
@(cd ${_DISTDIR}; \
|
||
for file in ${DISTFILES}; do \
|
||
if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
|
||
if [ -h $$file -o -h `${BASENAME} $$file` ]; then \
|
||
${ECHO_MSG} ">> ${_DISTDIR}/$$file is a broken symlink."; \
|
||
${ECHO_MSG} ">> Perhaps a filesystem (most likely a CD) isn't mounted?"; \
|
||
${ECHO_MSG} ">> Please correct this problem and try again."; \
|
||
exit 1; \
|
||
fi ; \
|
||
${ECHO_MSG} ">> $$file doesn't seem to exist on this system."; \
|
||
for site in ${MASTER_SITES}; do \
|
||
${ECHO_MSG} ">> Attempting to fetch from $${site}."; \
|
||
DIR=${DIST_SUBDIR}; \
|
||
CKSIZE=`${GREP} "^SIZE ($${DIR:+$$DIR/}$$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
|
||
if ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} ${FETCH_AFTER_ARGS}; then \
|
||
continue 2; \
|
||
fi \
|
||
done; \
|
||
${ECHO_MSG} ">> Couldn't fetch it - please try to retrieve this";\
|
||
${ECHO_MSG} ">> port manually into ${_DISTDIR} and try again."; \
|
||
exit 1; \
|
||
fi \
|
||
done)
|
||
.if defined(PATCHFILES)
|
||
@(cd ${_DISTDIR}; \
|
||
for file in ${PATCHFILES}; do \
|
||
if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
|
||
if [ -h $$file -o -h `${BASENAME} $$file` ]; then \
|
||
${ECHO_MSG} ">> ${_DISTDIR}/$$file is a broken symlink."; \
|
||
${ECHO_MSG} ">> Perhaps a filesystem (most likely a CD) isn't mounted?"; \
|
||
${ECHO_MSG} ">> Please correct this problem and try again."; \
|
||
exit 1; \
|
||
fi ; \
|
||
${ECHO_MSG} ">> $$file doesn't seem to exist on this system."; \
|
||
for site in ${PATCH_SITES}; do \
|
||
${ECHO_MSG} ">> Attempting to fetch from $${site}."; \
|
||
DIR=${DIST_SUBDIR}; \
|
||
CKSIZE=`${GREP} "^SIZE ($${DIR:+$$DIR/}$$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
|
||
if ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} ${FETCH_AFTER_ARGS}; then \
|
||
continue 2; \
|
||
fi \
|
||
done; \
|
||
${ECHO_MSG} ">> Couldn't fetch it - please try to retrieve this";\
|
||
${ECHO_MSG} ">> port manually into ${_DISTDIR} and try again."; \
|
||
exit 1; \
|
||
fi \
|
||
done)
|
||
.endif
|
||
.endif
|
||
|
||
# Extract
|
||
|
||
.if !target(do-extract)
|
||
do-extract:
|
||
@${RM} -rf ${WRKDIR}
|
||
@${MKDIR} ${WRKDIR}
|
||
@for file in ${EXTRACT_ONLY}; do \
|
||
if ! (cd ${WRKDIR} && ${EXTRACT_CMD} ${EXTRACT_BEFORE_ARGS} ${_DISTDIR}/$$file ${EXTRACT_AFTER_ARGS});\
|
||
then \
|
||
exit 1; \
|
||
fi \
|
||
done
|
||
.endif
|
||
|
||
# Patch
|
||
|
||
.if !target(do-patch)
|
||
do-patch:
|
||
.if defined(PATCHFILES)
|
||
@${ECHO_MSG} "===> Applying distribution patches for ${PKGNAME}"
|
||
@(cd ${_DISTDIR}; \
|
||
for i in ${PATCHFILES}; do \
|
||
if [ ${PATCH_DEBUG_TMP} = yes ]; then \
|
||
${ECHO_MSG} "===> Applying distribution patch $$i" ; \
|
||
fi; \
|
||
case $$i in \
|
||
*.Z|*.gz) \
|
||
${GZCAT} $$i | ${PATCH} ${PATCH_DIST_ARGS}; \
|
||
;; \
|
||
*) \
|
||
${PATCH} ${PATCH_DIST_ARGS} < $$i; \
|
||
;; \
|
||
esac; \
|
||
done)
|
||
.endif
|
||
@if [ -d ${PATCHDIR} ]; then \
|
||
if [ "`echo ${PATCHDIR}/patch-*`" = "${PATCHDIR}/patch-*" ]; then \
|
||
${ECHO_MSG} "===> Ignoring empty patch directory"; \
|
||
if [ -d ${PATCHDIR}/CVS ]; then \
|
||
${ECHO_MSG} "===> Perhaps you forgot the -P flag to cvs co or update?"; \
|
||
fi; \
|
||
else \
|
||
${ECHO_MSG} "===> Applying ${OPSYS} patches for ${PKGNAME}" ; \
|
||
for i in ${PATCHDIR}/patch-*; do \
|
||
case $$i in \
|
||
*.orig|*.rej|*~) \
|
||
${ECHO_MSG} "===> Ignoring patchfile $$i" ; \
|
||
;; \
|
||
*) \
|
||
if [ ${PATCH_DEBUG_TMP} = yes ]; then \
|
||
${ECHO_MSG} "===> Applying ${OPSYS} patch $$i" ; \
|
||
fi; \
|
||
${PATCH} ${PATCH_ARGS} < $$i; \
|
||
;; \
|
||
esac; \
|
||
done; \
|
||
fi; \
|
||
fi
|
||
.endif
|
||
|
||
# Configure
|
||
|
||
.if !target(do-configure)
|
||
do-configure:
|
||
.if defined(USE_AUTOCONF)
|
||
@(cd ${WRKSRC} && ${AUTOCONF})
|
||
.endif
|
||
@if [ -f ${SCRIPTDIR}/configure ]; then \
|
||
cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
|
||
${SCRIPTDIR}/configure; \
|
||
fi
|
||
.if defined(HAS_CONFIGURE)
|
||
@(cd ${WRKSRC} && CC="${CC}" CXX="${CXX}" ac_cv_path_CC="${CC}" \
|
||
CFLAGS="${CFLAGS}" \
|
||
INSTALL="/usr/bin/install -c -o ${BINOWN} -g ${BINGRP}" \
|
||
INSTALL_DATA="${INSTALL_DATA}" \
|
||
INSTALL_PROGRAM="${INSTALL_PROGRAM}" \
|
||
INSTALL_SCRIPT="${INSTALL_SCRIPT}" \
|
||
${CONFIGURE_ENV} ./${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS})
|
||
.endif
|
||
.if defined(USE_IMAKE)
|
||
@(cd ${WRKSRC} && ${XMKMF})
|
||
.endif
|
||
.endif
|
||
|
||
# Build
|
||
|
||
.if !target(do-build)
|
||
do-build:
|
||
.if defined(USE_GMAKE)
|
||
@(cd ${WRKSRC}; ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${ALL_TARGET})
|
||
.else defined(USE_GMAKE)
|
||
@(cd ${WRKSRC}; ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${ALL_TARGET})
|
||
.endif
|
||
.endif
|
||
|
||
# Install
|
||
|
||
.if !target(do-install)
|
||
do-install:
|
||
.if defined(USE_GMAKE)
|
||
@(cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${INSTALL_TARGET})
|
||
.if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES)
|
||
@(cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} install.man)
|
||
.endif
|
||
.else defined(USE_GMAKE)
|
||
@(cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${INSTALL_TARGET})
|
||
.if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES)
|
||
@(cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} install.man)
|
||
.endif
|
||
.endif
|
||
.endif
|
||
|
||
# Package
|
||
|
||
.if !target(do-package)
|
||
do-package: ${TMPPLIST}
|
||
@${ECHO_MSG} "===> Building package for ${PKGNAME}"
|
||
@if [ -d ${PACKAGES} ]; then \
|
||
if [ ! -d ${PKGREPOSITORY} ]; then \
|
||
if ! ${MKDIR} ${PKGREPOSITORY}; then \
|
||
${ECHO_MSG} ">> Can't create directory ${PKGREPOSITORY}."; \
|
||
exit 1; \
|
||
fi; \
|
||
fi; \
|
||
fi
|
||
@if ${PKG_CMD} ${PKG_ARGS} ${PKGFILE}; then \
|
||
if [ -d ${PACKAGES} ]; then \
|
||
${MAKE} ${.MAKEFLAGS} package-links; \
|
||
fi; \
|
||
else \
|
||
${MAKE} ${.MAKEFLAGS} delete-package; \
|
||
exit 1; \
|
||
fi
|
||
.endif
|
||
|
||
# Some support rules for do-package
|
||
|
||
.if !target(package-links)
|
||
package-links:
|
||
@${MAKE} ${.MAKEFLAGS} delete-package-links
|
||
@for cat in ${CATEGORIES}; do \
|
||
if [ ! -d ${PACKAGES}/$$cat ]; then \
|
||
if ! ${MKDIR} ${PACKAGES}/$$cat; then \
|
||
${ECHO_MSG} ">> Can't create directory ${PACKAGES}/$$cat."; \
|
||
exit 1; \
|
||
fi; \
|
||
fi; \
|
||
${LN} -s ../${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PACKAGES}/$$cat; \
|
||
done
|
||
.if !defined(NO_LATEST_LINK)
|
||
@if [ ! -d ${PKGLATESTREPOSITORY} ]; then \
|
||
if ! ${MKDIR} ${PKGLATESTREPOSITORY}; then \
|
||
${ECHO_MSG} ">> Can't create directory ${PKGLATESTREPOSITORY}."; \
|
||
exit 1; \
|
||
fi; \
|
||
fi
|
||
@${LN} -s ../${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PKGLATESTFILE}
|
||
.endif
|
||
.endif
|
||
|
||
.if !target(delete-package-links)
|
||
delete-package-links:
|
||
@${RM} -f ${PACKAGES}/[a-z]*/${PKGNAME}${PKG_SUFX}
|
||
.if !defined(NO_LATEST_LINK)
|
||
@${RM} -f ${PKGLATESTFILE}
|
||
.endif
|
||
.endif
|
||
|
||
.if !target(delete-package)
|
||
delete-package:
|
||
@${MAKE} ${.MAKEFLAGS} delete-package-links
|
||
@${RM} -f ${PKGFILE}
|
||
.endif
|
||
|
||
################################################################
|
||
# This is the "generic" port target, actually a macro used from the
|
||
# six main targets. See below for more.
|
||
################################################################
|
||
|
||
_PORT_USE: .USE
|
||
.if make(real-fetch)
|
||
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fetch-depends
|
||
.endif
|
||
.if make(real-extract)
|
||
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} checksum REAL_EXTRACT=yes
|
||
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} build-depends lib-depends misc-depends
|
||
.endif
|
||
.if make(real-install)
|
||
.if !defined(NO_PKG_REGISTER) && !defined(FORCE_PKG_REGISTER)
|
||
@if [ -d ${PKG_DBDIR}/${PKGNAME} ]; then \
|
||
${ECHO_MSG} "===> ${PKGNAME} is already installed - perhaps an older version?"; \
|
||
${ECHO_MSG} " If so, you may wish to \`\`make deinstall'' and install"; \
|
||
${ECHO_MSG} " this port again by \`\`make reinstall'' to upgrade it properly."; \
|
||
${ECHO_MSG} " If you really wish to overwrite the old port of ${PKGNAME}"; \
|
||
${ECHO_MSG} " without deleting it first, set the variable \"FORCE_PKG_REGISTER\""; \
|
||
${ECHO_MSG} " in your environment or the \"make install\" command line."; \
|
||
exit 1; \
|
||
fi
|
||
.endif
|
||
@if [ `${SH} -c umask` != 0022 ]; then \
|
||
${ECHO_MSG} "===> Warning: your umask is \"`${SH} -c umask`"\".; \
|
||
${ECHO_MSG} " If this is not desired, set it to an appropriate value"; \
|
||
${ECHO_MSG} " and install this port again by \`\`make reinstall''."; \
|
||
fi
|
||
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} run-depends lib-depends
|
||
.endif
|
||
.if make(real-install)
|
||
.if !defined(NO_MTREE)
|
||
@if [ `id -u` = 0 ]; then \
|
||
${MKDIR} ${PREFIX}; \
|
||
if [ ! -f ${MTREE_FILE} ]; then \
|
||
${ECHO_MSG} "Error: mtree file \"${MTREE_FILE}\" is missing."; \
|
||
${ECHO_MSG} "Copy it from a suitable location (e.g., /usr/src/etc/mtree) and try again."; \
|
||
exit 1; \
|
||
else \
|
||
${MTREE_CMD} ${MTREE_ARGS} ${PREFIX}/ >/dev/null; \
|
||
fi; \
|
||
else \
|
||
${ECHO_MSG} "Warning: not superuser, can't run mtree."; \
|
||
${ECHO_MSG} "Become root and try again to ensure correct permissions."; \
|
||
fi
|
||
.endif
|
||
.endif
|
||
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/pre-/}
|
||
@if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/pre-/} ]; then \
|
||
cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
|
||
${SCRIPTDIR}/${.TARGET:S/^real-/pre-/}; \
|
||
fi
|
||
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/do-/}
|
||
# put here so ports can change the contents of ${TMPPLIST} if necessary
|
||
.if make(real-install)
|
||
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} generate-plist
|
||
.endif
|
||
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/post-/}
|
||
@if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/post-/} ]; then \
|
||
cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
|
||
${SCRIPTDIR}/${.TARGET:S/^real-/post-/}; \
|
||
fi
|
||
.if make(real-install) && (defined(_MANPAGES) || defined(_MLINKS))
|
||
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} compress-man
|
||
.endif
|
||
.if make(real-install) && !defined(NO_PKG_REGISTER)
|
||
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fake-pkg
|
||
.endif
|
||
.if !make(real-fetch) \
|
||
&& (!make(real-patch) || !defined(PATCH_CHECK_ONLY)) \
|
||
&& (!make(real-package) || !defined(PACKAGE_NOINSTALL))
|
||
@${TOUCH} ${TOUCH_FLAGS} ${WRKDIR}/.${.TARGET:S/^real-//}_done
|
||
.endif
|
||
|
||
################################################################
|
||
# Skeleton targets start here
|
||
#
|
||
# You shouldn't have to change these. Either add the pre-* or
|
||
# post-* targets/scripts or redefine the do-* targets. These
|
||
# targets don't do anything other than checking for cookies and
|
||
# call the necessary targets/scripts.
|
||
################################################################
|
||
|
||
.if !target(fetch)
|
||
fetch:
|
||
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-fetch
|
||
.endif
|
||
|
||
.if !target(extract)
|
||
extract: ${EXTRACT_COOKIE}
|
||
.endif
|
||
|
||
.if !target(patch)
|
||
patch: ${PATCH_COOKIE}
|
||
.endif
|
||
|
||
.if !target(configure)
|
||
configure: ${CONFIGURE_COOKIE}
|
||
.endif
|
||
|
||
.if !target(build)
|
||
build: ${BUILD_COOKIE}
|
||
.endif
|
||
|
||
.if !target(install)
|
||
install: ${INSTALL_COOKIE}
|
||
.endif
|
||
|
||
.if !target(package)
|
||
package: ${PACKAGE_COOKIE}
|
||
.endif
|
||
|
||
${EXTRACT_COOKIE}:
|
||
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fetch
|
||
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-extract
|
||
${PATCH_COOKIE}:
|
||
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} extract
|
||
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-patch
|
||
${CONFIGURE_COOKIE}:
|
||
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} patch
|
||
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-configure
|
||
${BUILD_COOKIE}:
|
||
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} configure
|
||
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-build
|
||
${INSTALL_COOKIE}:
|
||
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} build
|
||
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-install
|
||
${PACKAGE_COOKIE}:
|
||
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} install
|
||
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-package
|
||
|
||
# And call the macros
|
||
|
||
real-fetch: _PORT_USE
|
||
real-extract: _PORT_USE
|
||
@${ECHO_MSG} "===> Extracting for ${PKGNAME}"
|
||
real-patch: _PORT_USE
|
||
@${ECHO_MSG} "===> Patching for ${PKGNAME}"
|
||
real-configure: _PORT_USE
|
||
@${ECHO_MSG} "===> Configuring for ${PKGNAME}"
|
||
real-build: _PORT_USE
|
||
@${ECHO_MSG} "===> Building for ${PKGNAME}"
|
||
real-install: _PORT_USE
|
||
@${ECHO_MSG} "===> Installing for ${PKGNAME}"
|
||
real-package: _PORT_USE
|
||
|
||
# Empty pre-* and post-* targets, note we can't use .if !target()
|
||
# in the _PORT_USE macro
|
||
|
||
.for name in fetch extract patch configure build install package
|
||
|
||
.if !target(pre-${name})
|
||
pre-${name}:
|
||
@${DO_NADA}
|
||
.endif
|
||
|
||
.if !target(post-${name})
|
||
post-${name}:
|
||
@${DO_NADA}
|
||
.endif
|
||
|
||
.endfor
|
||
|
||
# Checkpatch
|
||
#
|
||
# Special target to verify patches
|
||
|
||
.if !target(checkpatch)
|
||
checkpatch:
|
||
@cd ${.CURDIR} && ${MAKE} PATCH_CHECK_ONLY=yes ${.MAKEFLAGS} patch
|
||
.endif
|
||
|
||
# Reinstall
|
||
#
|
||
# Special target to re-run install
|
||
|
||
.if !target(reinstall)
|
||
reinstall:
|
||
@${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE}
|
||
@DEPENDS_TARGET=${DEPENDS_TARGET} ${MAKE} install
|
||
.endif
|
||
|
||
# Deinstall
|
||
#
|
||
# Special target to remove installation
|
||
|
||
.if !target(deinstall)
|
||
deinstall:
|
||
@${ECHO_MSG} "===> Deinstalling for ${PKGNAME}"
|
||
@${PKG_DELETE} -f ${PKGNAME}
|
||
@${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE}
|
||
.endif
|
||
|
||
################################################################
|
||
# Some more targets supplied for users' convenience
|
||
################################################################
|
||
|
||
# Cleaning up
|
||
|
||
.if !target(pre-clean)
|
||
pre-clean:
|
||
@${DO_NADA}
|
||
.endif
|
||
|
||
.if !target(clean)
|
||
clean: pre-clean
|
||
.if !defined(NOCLEANDEPENDS)
|
||
@${MAKE} clean-depends
|
||
.endif
|
||
@${ECHO_MSG} "===> Cleaning for ${PKGNAME}"
|
||
@if [ -d ${WRKDIR} ]; then \
|
||
if [ -w ${WRKDIR} ]; then \
|
||
${RM} -rf ${WRKDIR}; \
|
||
else \
|
||
${ECHO_MSG} "===> ${WRKDIR} not writable, skipping"; \
|
||
fi; \
|
||
fi
|
||
.endif
|
||
|
||
.if !target(pre-distclean)
|
||
pre-distclean:
|
||
@${DO_NADA}
|
||
.endif
|
||
|
||
.if !target(distclean)
|
||
distclean: pre-distclean clean delete-distfiles
|
||
.endif
|
||
|
||
.if !target(delete-distfiles)
|
||
delete-distfiles:
|
||
@${ECHO_MSG} "===> Deleting distfiles for ${PKGNAME}"
|
||
@(if [ "X${DISTFILES}${PATCHFILES}" != "X" -a -d ${_DISTDIR} ]; then \
|
||
cd ${_DISTDIR}; \
|
||
${RM} -f ${DISTFILES} ${PATCHFILES}; \
|
||
fi)
|
||
.if defined(DIST_SUBDIR)
|
||
-@${RMDIR} ${_DISTDIR}
|
||
.endif
|
||
.endif
|
||
|
||
# Prints out a list of files to fetch (useful to do a batch fetch)
|
||
|
||
.if !target(fetch-list)
|
||
fetch-list:
|
||
@${MKDIR} ${_DISTDIR}
|
||
@(cd ${_DISTDIR}; \
|
||
for file in ${DISTFILES}; do \
|
||
if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
|
||
for site in ${MASTER_SITES}; do \
|
||
DIR=${DIST_SUBDIR}; \
|
||
CKSIZE=`${GREP} "^SIZE ($${DIR:+$$DIR/}$$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
|
||
${ECHO} -n ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} "${FETCH_AFTER_ARGS}" '||' ; \
|
||
break; \
|
||
done; \
|
||
${ECHO} "echo $${file} not fetched" ; \
|
||
fi \
|
||
done)
|
||
.if defined(PATCHFILES)
|
||
@(cd ${_DISTDIR}; \
|
||
for file in ${PATCHFILES}; do \
|
||
if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
|
||
for site in ${PATCH_SITES}; do \
|
||
DIR=${DIST_SUBDIR}; \
|
||
CKSIZE=`${GREP} "^SIZE ($${DIR:+$$DIR/}$$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
|
||
${ECHO} -n ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} "${FETCH_AFTER_ARGS}" '||' ; \
|
||
break; \
|
||
done; \
|
||
${ECHO} "echo $${file} not fetched" ; \
|
||
fi \
|
||
done)
|
||
.endif
|
||
.endif
|
||
|
||
# Checksumming utilities
|
||
|
||
.if !target(makesum)
|
||
makesum: fetch
|
||
@${MKDIR} ${FILESDIR}
|
||
@if [ -f ${MD5_FILE} ]; then ${RM} -f ${MD5_FILE}; fi
|
||
@(cd ${DISTDIR}; \
|
||
for file in ${_CKSUMFILES}; do \
|
||
${MD5} $$file >> ${MD5_FILE}; \
|
||
done)
|
||
@for file in ${_IGNOREFILES}; do \
|
||
${ECHO} "MD5 ($$file) = IGNORE" >> ${MD5_FILE}; \
|
||
done
|
||
.endif
|
||
# this line goes after the ${MD5} above
|
||
# echo "SIZE ($$file) = "`wc -c < $$file` >> ${MD5_FILE}; \
|
||
|
||
|
||
.if !target(checksum)
|
||
checksum:
|
||
.if !defined(REAL_EXTRACT)
|
||
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fetch
|
||
.endif
|
||
@if [ ! -f ${MD5_FILE} ]; then \
|
||
${ECHO_MSG} ">> No MD5 checksum file."; \
|
||
else \
|
||
(cd ${DISTDIR}; OK="true"; \
|
||
for file in ${_CKSUMFILES}; do \
|
||
CKSUM=`${MD5} < $$file`; \
|
||
CKSUM2=`${GREP} "^MD5 ($$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
|
||
if [ "$$CKSUM2" = "" ]; then \
|
||
${ECHO_MSG} ">> No checksum recorded for $$file."; \
|
||
OK="false"; \
|
||
elif [ "$$CKSUM2" = "IGNORE" ]; then \
|
||
${ECHO_MSG} ">> Checksum for $$file is set to IGNORE in md5 file even though"; \
|
||
${ECHO_MSG} " the file is not in the "'$$'"{IGNOREFILES} list."; \
|
||
OK="false"; \
|
||
elif ${EXPR} "$$CKSUM2" : ".*$$CKSUM" > /dev/null; then \
|
||
${ECHO_MSG} ">> Checksum OK for $$file."; \
|
||
else \
|
||
${ECHO_MSG} ">> Checksum mismatch for $$file."; \
|
||
OK="false"; \
|
||
fi; \
|
||
done; \
|
||
for file in ${_IGNOREFILES}; do \
|
||
CKSUM2=`${GREP} "($$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
|
||
if [ "$$CKSUM2" = "" ]; then \
|
||
${ECHO_MSG} ">> No checksum recorded for $$file, file is in "'$$'"{IGNOREFILES} list."; \
|
||
OK="false"; \
|
||
elif [ "$$CKSUM2" != "IGNORE" ]; then \
|
||
${ECHO_MSG} ">> Checksum for $$file is not set to IGNORE in md5 file even though"; \
|
||
${ECHO_MSG} " the file is in the "'$$'"{IGNOREFILES} list."; \
|
||
OK="false"; \
|
||
fi; \
|
||
done; \
|
||
if [ "$$OK" != "true" ]; then \
|
||
${ECHO_MSG} "Make sure the Makefile and md5 file (${MD5_FILE})"; \
|
||
${ECHO_MSG} "are up to date. If you want to override this check, type"; \
|
||
${ECHO_MSG} "\"make NO_CHECKSUM=yes [other args]\"."; \
|
||
exit 1; \
|
||
fi) ; \
|
||
fi
|
||
.endif
|
||
|
||
################################################################
|
||
# The special package-building targets
|
||
# You probably won't need to touch these
|
||
################################################################
|
||
|
||
# Nobody should want to override this unless PKGNAME is simply bogus.
|
||
|
||
.if !target(package-name)
|
||
package-name:
|
||
@${ECHO} ${PKGNAME}
|
||
.endif
|
||
|
||
# Build a package but don't check the package cookie
|
||
|
||
.if !target(repackage)
|
||
repackage: pre-repackage package
|
||
|
||
pre-repackage:
|
||
@${RM} -f ${PACKAGE_COOKIE}
|
||
.endif
|
||
|
||
# Build a package but don't check the cookie for installation, also don't
|
||
# install package cookie
|
||
|
||
.if !target(package-noinstall)
|
||
package-noinstall:
|
||
@${MKDIR} ${WRKDIR}
|
||
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} PACKAGE_NOINSTALL=yes real-package
|
||
@${RM} ${TMPPLIST}
|
||
-@${RMDIR} ${WRKDIR}
|
||
.endif
|
||
|
||
################################################################
|
||
# Dependency checking
|
||
################################################################
|
||
|
||
.if !target(depends)
|
||
depends: lib-depends misc-depends
|
||
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fetch-depends
|
||
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} build-depends
|
||
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} run-depends
|
||
|
||
.if make(fetch-depends)
|
||
DEPENDS_TMP+= ${FETCH_DEPENDS}
|
||
.endif
|
||
|
||
.if make(build-depends)
|
||
DEPENDS_TMP+= ${BUILD_DEPENDS}
|
||
.endif
|
||
|
||
.if make(run-depends)
|
||
DEPENDS_TMP+= ${RUN_DEPENDS}
|
||
.endif
|
||
|
||
_DEPENDS_USE: .USE
|
||
.if defined(DEPENDS_TMP)
|
||
.if !defined(NO_DEPENDS)
|
||
@for i in ${DEPENDS_TMP}; do \
|
||
prog=`${ECHO} $$i | ${SED} -e 's/:.*//'`; \
|
||
dir=`${ECHO} $$i | ${SED} -e 's/[^:]*://'`; \
|
||
if ${EXPR} "$$dir" : '.*:' > /dev/null; then \
|
||
target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \
|
||
dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \
|
||
else \
|
||
target=${DEPENDS_TARGET}; \
|
||
fi; \
|
||
if ${EXPR} "$$prog" : \\/ >/dev/null; then \
|
||
if [ -e "$$prog" ]; then \
|
||
${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - found"; \
|
||
notfound=0; \
|
||
else \
|
||
${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - not found"; \
|
||
notfound=1; \
|
||
fi; \
|
||
else \
|
||
if which "$$prog" > /dev/null 2>&1 ; then \
|
||
${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog - found"; \
|
||
notfound=0; \
|
||
else \
|
||
${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog - not found"; \
|
||
notfound=1; \
|
||
fi; \
|
||
fi; \
|
||
if [ $$notfound != 0 ]; then \
|
||
${ECHO_MSG} "===> Verifying $$target for $$prog in $$dir"; \
|
||
if [ ! -d "$$dir" ]; then \
|
||
${ECHO_MSG} " >> No directory for $$prog. Skipping.."; \
|
||
else \
|
||
(cd $$dir; ${MAKE} ${.MAKEFLAGS} $$target) ; \
|
||
${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; \
|
||
fi; \
|
||
fi; \
|
||
done
|
||
.endif
|
||
.else
|
||
@${DO_NADA}
|
||
.endif
|
||
|
||
fetch-depends: _DEPENDS_USE
|
||
build-depends: _DEPENDS_USE
|
||
run-depends: _DEPENDS_USE
|
||
|
||
lib-depends:
|
||
.if defined(LIB_DEPENDS)
|
||
.if !defined(NO_DEPENDS)
|
||
@for i in ${LIB_DEPENDS}; do \
|
||
lib=`${ECHO} $$i | ${SED} -e 's/:.*//'`; \
|
||
dir=`${ECHO} $$i | ${SED} -e 's/[^:]*://'`; \
|
||
if ${EXPR} "$$dir" : '.*:' > /dev/null; then \
|
||
target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \
|
||
dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \
|
||
else \
|
||
target=${DEPENDS_TARGET}; \
|
||
fi; \
|
||
if ${LDCONFIG} -r | ${GREP} -qwF -e "-l$$lib"; then \
|
||
${ECHO_MSG} "===> ${PKGNAME} depends on shared library: $$lib - found"; \
|
||
else \
|
||
${ECHO_MSG} "===> ${PKGNAME} depends on shared library: $$lib - not found"; \
|
||
${ECHO_MSG} "===> Verifying $$target for $$lib in $$dir"; \
|
||
if [ ! -d "$$dir" ]; then \
|
||
${ECHO_MSG} " >> No directory for $$lib. Skipping.."; \
|
||
else \
|
||
(cd $$dir; ${MAKE} ${.MAKEFLAGS} $$target) ; \
|
||
${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; \
|
||
if ${LDCONFIG} -r | ${GREP} -qwF -e "-l$$lib"; then \
|
||
${TRUE}; \
|
||
else \
|
||
${ECHO_MSG} "Error: shared library \"$$lib\" does not exist"; \
|
||
${FALSE}; \
|
||
fi; \
|
||
fi; \
|
||
fi; \
|
||
done
|
||
.endif
|
||
.else
|
||
@${DO_NADA}
|
||
.endif
|
||
|
||
misc-depends:
|
||
.if defined(DEPENDS)
|
||
.if !defined(NO_DEPENDS)
|
||
@for dir in ${DEPENDS}; do \
|
||
if ${EXPR} "$$dir" : '.*:' > /dev/null; then \
|
||
target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \
|
||
dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \
|
||
else \
|
||
target=${DEPENDS_TARGET}; \
|
||
fi; \
|
||
${ECHO_MSG} "===> ${PKGNAME} depends on: $$dir"; \
|
||
${ECHO_MSG} "===> Verifying $$target for $$dir"; \
|
||
if [ ! -d $$dir ]; then \
|
||
${ECHO_MSG} " >> No directory for $$dir. Skipping.."; \
|
||
else \
|
||
(cd $$dir; ${MAKE} ${.MAKEFLAGS} $$target) ; \
|
||
fi \
|
||
done
|
||
@${ECHO_MSG} "===> Returning to build of ${PKGNAME}"
|
||
.endif
|
||
.else
|
||
@${DO_NADA}
|
||
.endif
|
||
|
||
.endif
|
||
|
||
.if !target(clean-depends)
|
||
clean-depends:
|
||
.if defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || defined(LIB_DEPENDS) \
|
||
|| defined(RUN_DEPENDS)
|
||
@for dir in `${ECHO} "${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} ${RUN_DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u`; do \
|
||
if [ -d $$dir ] ; then \
|
||
(cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean clean-depends); \
|
||
fi \
|
||
done
|
||
.endif
|
||
.if defined(DEPENDS)
|
||
@for dir in `${ECHO} "${DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \
|
||
if [ -d $$dir ] ; then \
|
||
(cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean clean-depends); \
|
||
fi \
|
||
done
|
||
.endif
|
||
.endif
|
||
|
||
# Dependency lists: build and runtime. Print out directory names.
|
||
|
||
build-depends-list:
|
||
@for dir in `${ECHO} "${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \
|
||
if [ -d $$dir ]; then \
|
||
${ECHO} $$dir; \
|
||
else \
|
||
${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
|
||
fi; \
|
||
done | sort -u
|
||
|
||
run-depends-list:
|
||
@for dir in `${ECHO} "${LIB_DEPENDS} ${RUN_DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \
|
||
if [ -d $$dir ]; then \
|
||
${ECHO} $$dir; \
|
||
else \
|
||
${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
|
||
fi; \
|
||
done | sort -u
|
||
|
||
# This one does not print out directory names -- it could take a long time.
|
||
package-depends:
|
||
@for dir in `${ECHO} "${LIB_DEPENDS} ${RUN_DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \
|
||
if [ -d $$dir ]; then \
|
||
(cd $$dir ; ${MAKE} package-name package-depends); \
|
||
else \
|
||
${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
|
||
fi; \
|
||
done
|
||
|
||
################################################################
|
||
# Everything after here are internal targets and really
|
||
# shouldn't be touched by anybody but the release engineers.
|
||
################################################################
|
||
|
||
# This target generates an index entry suitable for aggregation into
|
||
# a large index. Format is:
|
||
#
|
||
# distribution-name|port-path|installation-prefix|comment| \
|
||
# description-file|maintainer|categories|build deps|run deps
|
||
|
||
.if !target(describe)
|
||
describe:
|
||
@${ECHO} -n "${PKGNAME}|${.CURDIR}|"; \
|
||
${ECHO} -n "${PREFIX}|"; \
|
||
if [ -f ${COMMENT} ]; then \
|
||
${ECHO} -n "`${CAT} ${COMMENT}`"; \
|
||
else \
|
||
${ECHO} -n "** No Description"; \
|
||
fi; \
|
||
if [ -f ${DESCR} ]; then \
|
||
${ECHO} -n "|${DESCR}"; \
|
||
else \
|
||
${ECHO} -n "|/dev/null"; \
|
||
fi; \
|
||
${ECHO} -n "|${MAINTAINER}|${CATEGORIES}|"; \
|
||
case "A${FETCH_DEPENDS}B${BUILD_DEPENDS}C${LIB_DEPENDS}D${DEPENDS}E" in \
|
||
ABCDE) ;; \
|
||
*) cd ${.CURDIR} && ${ECHO} -n `${MAKE} build-depends-list|sort -u`;; \
|
||
esac; \
|
||
${ECHO} -n "|"; \
|
||
case "A${RUN_DEPENDS}B${LIB_DEPENDS}C${DEPENDS}D" in \
|
||
ABCD) ;; \
|
||
*) cd ${.CURDIR} && ${ECHO} -n `${MAKE} run-depends-list|sort -u`;; \
|
||
esac; \
|
||
${ECHO} ""
|
||
.endif
|
||
|
||
.if !target(readmes)
|
||
readmes: readme
|
||
.endif
|
||
|
||
.if !target(readme)
|
||
readme:
|
||
@rm -f README.html
|
||
@cd ${.CURDIR} && make README.html
|
||
.endif
|
||
|
||
README.html:
|
||
@${ECHO_MSG} "===> Creating README.html for ${PKGNAME}"
|
||
@${CAT} ${TEMPLATES}/README.port | \
|
||
${SED} -e 's%%PORT%%'`${ECHO} ${.CURDIR} | ${SED} -e 's.*/\([^/]*/[^/]*\)$$\1'`'g' \
|
||
-e 's%%PKG%%${PKGNAME}g' \
|
||
-e '/%%COMMENT%%/r${PKGDIR}/COMMENT' \
|
||
-e '/%%COMMENT%%/d' \
|
||
-e 's%%BUILD_DEPENDS%%'"`${MAKE} pretty-print-build-depends-list`"'' \
|
||
-e 's%%RUN_DEPENDS%%'"`${MAKE} pretty-print-run-depends-list`"'' \
|
||
>> $@
|
||
|
||
# The following two targets require an up-to-date INDEX in ${PORTSDIR}
|
||
|
||
.if !target(pretty-print-build-depends-list)
|
||
pretty-print-build-depends-list:
|
||
.if defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || \
|
||
defined(LIB_DEPENDS) || defined(DEPENDS)
|
||
@${ECHO} -n 'This port requires package(s) "'
|
||
@${ECHO} -n `grep '^${PKGNAME}|' ${PORTSDIR}/INDEX | awk -F\| '{print $$8;}'`
|
||
@${ECHO} '" to build.'
|
||
.endif
|
||
.endif
|
||
|
||
.if !target(pretty-print-run-depends-list)
|
||
pretty-print-run-depends-list:
|
||
.if defined(RUN_DEPENDS) || defined(LIB_DEPENDS) || defined(DEPENDS)
|
||
@${ECHO} -n 'This port requires package(s) "'
|
||
@${ECHO} -n `grep '^${PKGNAME}|' ${PORTSDIR}/INDEX | awk -F\| '{print $$9;}'`
|
||
@${ECHO} '" to run.'
|
||
.endif
|
||
.endif
|
||
|
||
# Generate packing list. Also tests to make sure all required package
|
||
# files exist.
|
||
|
||
.if !target(generate-plist)
|
||
generate-plist:
|
||
@${ECHO_MSG} "===> Generating temporary packing list"
|
||
@if [ ! -f ${PLIST} -o ! -f ${COMMENT} -o ! -f ${DESCR} ]; then ${ECHO} "** Missing package files for ${PKGNAME}."; exit 1; fi
|
||
@>${TMPPLIST}
|
||
.for man in ${__MANPAGES}
|
||
@${ECHO} ${man} >> ${TMPPLIST}
|
||
.endfor
|
||
.for _PREFIX in ${PREFIX}
|
||
.if ${_TMLINKS:M${_PREFIX}*}x != x
|
||
@for i in ${_TMLINKS:M${_PREFIX}*:S,^${_PREFIX}/,,}; do \
|
||
${ECHO} "$$i" >> ${TMPPLIST}; \
|
||
done
|
||
.endif
|
||
.if ${_TMLINKS:N${_PREFIX}*}x != x
|
||
@${ECHO} @cwd / >> ${TMPPLIST}
|
||
@for i in ${_TMLINKS:N${_PREFIX}*:S,^/,,}; do \
|
||
${ECHO} "$$i" >> ${TMPPLIST}; \
|
||
done
|
||
@${ECHO} '@cwd ${PREFIX}' >> ${TMPPLIST}
|
||
.endif
|
||
.endfor
|
||
@${SED} ${_sedsubplist} ${PLIST} >> ${TMPPLIST}
|
||
.if !defined(NO_FILTER_SHLIBS)
|
||
.if (${PORTOBJFORMAT} == "aout")
|
||
@${SED} -e 's,\(/lib.*\.so\.[0-9]*\)$$,\1.0,' ${TMPPLIST} > ${TMPPLIST}.tmp
|
||
.else
|
||
@${SED} -e 's,\(/lib.*\.so\.[0-9]*\)\.[0-9]*$$,\1,' ${TMPPLIST} > ${TMPPLIST}.tmp
|
||
.endif
|
||
@${MV} -f ${TMPPLIST}.tmp ${TMPPLIST}
|
||
.endif
|
||
.endif
|
||
|
||
${TMPPLIST}:
|
||
@cd ${.CURDIR} && ${MAKE} generate-plist
|
||
|
||
# Compress (or uncompress) and symlink manpages.
|
||
.if !target(compress-man)
|
||
compress-man:
|
||
.if ${MANCOMPRESSED} == yes && defined(NOMANCOMPRESS)
|
||
@${ECHO_MSG} "===> Uncompressing manual pages for ${PKGNAME}"
|
||
.for manpage in ${_MANPAGES}
|
||
@${GUNZIP_CMD} ${manpage}
|
||
.endfor
|
||
.elif ${MANCOMPRESSED} == no && !defined(NOMANCOMPRESS)
|
||
@${ECHO_MSG} "===> Compressing manual pages for ${PKGNAME}"
|
||
.for manpage in ${_MANPAGES}
|
||
@${GZIP_CMD} ${manpage}
|
||
.endfor
|
||
.endif
|
||
.if defined(_MLINKS)
|
||
@set ${_MLINKS:S,"",,g:S,//,/,g}; \
|
||
while :; do \
|
||
[ $$# -eq 0 ] && break || ${TRUE}; \
|
||
${RM} -f $${2%.gz}; ${RM} -f $$2.gz; \
|
||
${LN} -fs `${ECHO} $$1 $$2 | ${AWK} '{ \
|
||
z=split($$1, a, /\//); x=split($$2, b, /\//); \
|
||
while (a[i] == b[i]) i++; \
|
||
for (q=i; q<x; q++) printf "../"; \
|
||
for (; i<z; i++) printf a[i] "/"; printf a[z]; }'` $$2; \
|
||
shift; shift; \
|
||
done
|
||
.endif
|
||
.endif
|
||
|
||
# Fake installation of package so that user can pkg_delete it later.
|
||
# Also, make sure that an installed port is recognized correctly in
|
||
# accordance to the @pkgdep directive in the packing lists
|
||
|
||
.if !target(fake-pkg)
|
||
fake-pkg:
|
||
@if [ ! -d ${PKG_DBDIR} ]; then ${RM} -f ${PKG_DBDIR}; ${MKDIR} ${PKG_DBDIR}; fi
|
||
.if defined(FORCE_PKG_REGISTER)
|
||
@${RM} -rf ${PKG_DBDIR}/${PKGNAME}
|
||
.endif
|
||
@if [ ! -d ${PKG_DBDIR}/${PKGNAME} ]; then \
|
||
${ECHO_MSG} "===> Registering installation for ${PKGNAME}"; \
|
||
${MKDIR} ${PKG_DBDIR}/${PKGNAME}; \
|
||
${PKG_CMD} ${PKG_ARGS} -O ${PKGFILE} > ${PKG_DBDIR}/${PKGNAME}/+CONTENTS; \
|
||
${CP} ${DESCR} ${PKG_DBDIR}/${PKGNAME}/+DESC; \
|
||
${CP} ${COMMENT} ${PKG_DBDIR}/${PKGNAME}/+COMMENT; \
|
||
if [ -f ${PKGINSTALL} ]; then \
|
||
${CP} ${PKGINSTALL} ${PKG_DBDIR}/${PKGNAME}/+INSTALL; \
|
||
fi; \
|
||
if [ -f ${PKGDEINSTALL} ]; then \
|
||
${CP} ${PKGDEINSTALL} ${PKG_DBDIR}/${PKGNAME}/+DEINSTALL; \
|
||
fi; \
|
||
if [ -f ${PKGREQ} ]; then \
|
||
${CP} ${PKGREQ} ${PKG_DBDIR}/${PKGNAME}/+REQUIRE; \
|
||
fi; \
|
||
if [ -f ${PKGMESSAGE} ]; then \
|
||
${CP} ${PKGMESSAGE} ${PKG_DBDIR}/${PKGNAME}/+DISPLAY; \
|
||
fi; \
|
||
for dep in `${MAKE} package-depends ECHO_MSG=/usr/bin/true | sort -u`; do \
|
||
if [ -d ${PKG_DBDIR}/$$dep ]; then \
|
||
if ! ${GREP} ^${PKGNAME}$$ ${PKG_DBDIR}/$$dep/+REQUIRED_BY \
|
||
>/dev/null 2>&1; then \
|
||
${ECHO} ${PKGNAME} >> ${PKG_DBDIR}/$$dep/+REQUIRED_BY; \
|
||
fi; \
|
||
fi; \
|
||
done; \
|
||
fi
|
||
.endif
|
||
|
||
# Depend is generally meaningless for arbitrary ports, but if someone wants
|
||
# one they can override this. This is just to catch people who've gotten into
|
||
# the habit of typing `make depend all install' as a matter of course.
|
||
#
|
||
.if !target(depend)
|
||
depend:
|
||
.endif
|
||
|
||
# Same goes for tags
|
||
.if !target(tags)
|
||
tags:
|
||
.endif
|
||
|
||
.endif
|
||
# End of post-makefile section.
|