d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5cda6006e4
freebsd-skq/sys/net80211/ieee80211.c
Adrian Chadd 5cda6006e4 Bring over my initial work from the net80211 TX locking branch. 
This patchset implements a new TX lock, covering both the per-VAP (and
thus per-node) TX locking and the serialisation through to the underlying
physical device.

This implements the hard requirement that frames to the underlying physical
device are scheduled to the underlying device in the same order that they
are processed at the VAP layer.  This includes adding extra encapsulation
state (such as sequence numbers and CCMP IV numbers.)  Any order mismatch
here will result in dropped packets at the receiver.

There are multiple transmit contexts from the upper protocol layers as well
as the "raw" interface via the management and BPF transmit paths.
All of these need to be correctly serialised or bad behaviour will result
under load.

The specifics:

* add a new TX IC lock - it will eventually just be used for serialisation
  to the underlying physical device but for now it's used for both the
  VAP encapsulation/serialisation and the physical device dispatch.

  This lock is specifically non-recursive.

* Methodize the parent transmit, vap transmit and ic_raw_xmit function
  pointers; use lock assertions in the parent/vap transmit routines.

* Add a lock assertion in ieee80211_encap() - the TX lock must be held
  here to guarantee sensible behaviour.

* Refactor out the packet sending code from ieee80211_start() - now
  ieee80211_start() is just a loop over the ifnet queue and it dispatches
  each VAP packet send through ieee80211_start_pkt().

  Yes, I will likely rename ieee80211_start_pkt() to something that
  better reflects its status as a VAP packet transmit path.  More on
  that later.

* Add locking around the management and BAR TX sending - to ensure that
  encapsulation and TX are done hand-in-hand.

* Add locking in the mesh code - again, to ensure that encapsulation
  and mesh transmit are done hand-in-hand.

* Add locking around the power save queue and ageq handling, when
  dispatching to the parent interface.

* Add locking around the WDS handoff.

* Add a note in the mesh dispatch code that the TX path needs to be
  re-thought-out - right now it's doing a direct parent device transmit
  rather than going via the vap layer.  It may "work", but it's likely
  incorrect (as it bypasses any possible per-node power save and
  aggregation handling.)

Why not a per-VAP or per-node lock?

Because in order to ensure per-VAP ordering, we'd have to hold the
VAP lock across parent->if_transmit().  There are a few problems
with this:

* There's some state being setup during each driver transmit - specifically,
  the encryption encap / CCMP IV setup.  That should eventually be dragged
  back into the encapsulation phase but for now it lives in the driver TX path.
  This should be locked.

* Two drivers (ath, iwn) re-use the node->ni_txseqs array in order to
  allocate sequence numbers when doing transmit aggregation.  This should
  also be locked.

* Drivers may have multiple frames queued already - so when one calls
  if_transmit(), it may end up dispatching multiple frames for different
  VAPs/nodes, each needing a different lock when handling that particular
  end destination.

So to be "correct" locking-wise, we'd end up needing to grab a VAP or
node lock inside the driver TX path when setting up crypto / AMPDU sequence
numbers, and we may already _have_ a TX lock held - mostly for the same
destination vap/node, but sometimes it'll be for others.  That could lead
to LORs and thus deadlocks.

So for now, I'm sticking with an IC TX lock.  It has the advantage of
papering over the above and it also has the added advantage that I can
assert that it's being held when doing a parent device transmit.
I'll look at splitting the locks out a bit more later on.

General outstanding net80211 TX path issues / TODO:

* Look into separating out the VAP serialisation and the IC handoff.
  It's going to be tricky as parent->if_transmit() doesn't give me the
  opportunity to split queuing from driver dispatch.  See above.

* Work with monthadar to fix up the mesh transmit path so it doesn't go via
  the parent interface when retransmitting frames.

* Push the encryption handling back into the driver, if it's at all
  architectually sane to do so.  I know it's possible - it's what mac80211
  in Linux does.

* Make ieee80211_raw_xmit() queue a frame into VAP or parent queue rather
  than doing a short-cut direct into the driver.  There are QoS issues
  here - you do want your management frames to be encapsulated and pushed
  onto the stack sooner than the (large, bursty) amount of data frames
  that are queued.  But there has to be a saner way to do this.

* Fragments are still broken - drivers need to be upgraded to an if_transmit()
  implementation and then fragmentation handling needs to be properly fixed.

Tested:

* STA - AR5416, AR9280, Intel 5300 abgn wifi
* Hostap - AR5416, AR9160, AR9280
* Mesh - some testing by monthadar@, more to come.
2013-03-08 20:23:55 +00:00

1752 lines
49 KiB
C
Raw Blame History

/*-
* Copyright (c) 2001 Atsushi Onoe
* Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* IEEE 802.11 generic handler
*/
#include "opt_wlan.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_types.h>
#include <net/ethernet.h>
#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_regdomain.h>
#ifdef IEEE80211_SUPPORT_SUPERG
#include <net80211/ieee80211_superg.h>
#endif
#include <net80211/ieee80211_ratectl.h>
#include <net/bpf.h>
const char *ieee80211_phymode_name[IEEE80211_MODE_MAX] = {
[IEEE80211_MODE_AUTO] = "auto",
[IEEE80211_MODE_11A] = "11a",
[IEEE80211_MODE_11B] = "11b",
[IEEE80211_MODE_11G] = "11g",
[IEEE80211_MODE_FH] = "FH",
[IEEE80211_MODE_TURBO_A] = "turboA",
[IEEE80211_MODE_TURBO_G] = "turboG",
[IEEE80211_MODE_STURBO_A] = "sturboA",
[IEEE80211_MODE_HALF] = "half",
[IEEE80211_MODE_QUARTER] = "quarter",
[IEEE80211_MODE_11NA] = "11na",
[IEEE80211_MODE_11NG] = "11ng",
};
/* map ieee80211_opmode to the corresponding capability bit */
const int ieee80211_opcap[IEEE80211_OPMODE_MAX] = {
[IEEE80211_M_IBSS] = IEEE80211_C_IBSS,
[IEEE80211_M_WDS] = IEEE80211_C_WDS,
[IEEE80211_M_STA] = IEEE80211_C_STA,
[IEEE80211_M_AHDEMO] = IEEE80211_C_AHDEMO,
[IEEE80211_M_HOSTAP] = IEEE80211_C_HOSTAP,
[IEEE80211_M_MONITOR] = IEEE80211_C_MONITOR,
#ifdef IEEE80211_SUPPORT_MESH
[IEEE80211_M_MBSS] = IEEE80211_C_MBSS,
#endif
};
static const uint8_t ieee80211broadcastaddr[IEEE80211_ADDR_LEN] =
{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
static void ieee80211_syncflag_locked(struct ieee80211com *ic, int flag);
static void ieee80211_syncflag_ht_locked(struct ieee80211com *ic, int flag);
static void ieee80211_syncflag_ext_locked(struct ieee80211com *ic, int flag);
static int ieee80211_media_setup(struct ieee80211com *ic,
struct ifmedia *media, int caps, int addsta,
ifm_change_cb_t media_change, ifm_stat_cb_t media_stat);
static void ieee80211com_media_status(struct ifnet *, struct ifmediareq *);
static int ieee80211com_media_change(struct ifnet *);
static int media_status(enum ieee80211_opmode,
const struct ieee80211_channel *);
MALLOC_DEFINE(M_80211_VAP, "80211vap", "802.11 vap state");
/*
* Default supported rates for 802.11 operation (in IEEE .5Mb units).
*/
#define B(r) ((r) | IEEE80211_RATE_BASIC)
static const struct ieee80211_rateset ieee80211_rateset_11a =
{ 8, { B(12), 18, B(24), 36, B(48), 72, 96, 108 } };
static const struct ieee80211_rateset ieee80211_rateset_half =
{ 8, { B(6), 9, B(12), 18, B(24), 36, 48, 54 } };
static const struct ieee80211_rateset ieee80211_rateset_quarter =
{ 8, { B(3), 4, B(6), 9, B(12), 18, 24, 27 } };
static const struct ieee80211_rateset ieee80211_rateset_11b =
{ 4, { B(2), B(4), B(11), B(22) } };
/* NB: OFDM rates are handled specially based on mode */
static const struct ieee80211_rateset ieee80211_rateset_11g =
{ 12, { B(2), B(4), B(11), B(22), 12, 18, 24, 36, 48, 72, 96, 108 } };
#undef B
/*
* Fill in 802.11 available channel set, mark
* all available channels as active, and pick
* a default channel if not already specified.
*/
static void
ieee80211_chan_init(struct ieee80211com *ic)
{
#define DEFAULTRATES(m, def) do { \
if (ic->ic_sup_rates[m].rs_nrates == 0) \
ic->ic_sup_rates[m] = def; \
} while (0)
struct ieee80211_channel *c;
int i;
KASSERT(0 < ic->ic_nchans && ic->ic_nchans <= IEEE80211_CHAN_MAX,
("invalid number of channels specified: %u", ic->ic_nchans));
memset(ic->ic_chan_avail, 0, sizeof(ic->ic_chan_avail));
memset(ic->ic_modecaps, 0, sizeof(ic->ic_modecaps));
setbit(ic->ic_modecaps, IEEE80211_MODE_AUTO);
for (i = 0; i < ic->ic_nchans; i++) {
c = &ic->ic_channels[i];
KASSERT(c->ic_flags != 0, ("channel with no flags"));
/*
* Help drivers that work only with frequencies by filling
* in IEEE channel #'s if not already calculated. Note this
* mimics similar work done in ieee80211_setregdomain when
* changing regulatory state.
*/
if (c->ic_ieee == 0)
c->ic_ieee = ieee80211_mhz2ieee(c->ic_freq,c->ic_flags);
if (IEEE80211_IS_CHAN_HT40(c) && c->ic_extieee == 0)
c->ic_extieee = ieee80211_mhz2ieee(c->ic_freq +
(IEEE80211_IS_CHAN_HT40U(c) ? 20 : -20),
c->ic_flags);
/* default max tx power to max regulatory */
if (c->ic_maxpower == 0)
c->ic_maxpower = 2*c->ic_maxregpower;
setbit(ic->ic_chan_avail, c->ic_ieee);
/*
* Identify mode capabilities.
*/
if (IEEE80211_IS_CHAN_A(c))
setbit(ic->ic_modecaps, IEEE80211_MODE_11A);
if (IEEE80211_IS_CHAN_B(c))
setbit(ic->ic_modecaps, IEEE80211_MODE_11B);
if (IEEE80211_IS_CHAN_ANYG(c))
setbit(ic->ic_modecaps, IEEE80211_MODE_11G);
if (IEEE80211_IS_CHAN_FHSS(c))
setbit(ic->ic_modecaps, IEEE80211_MODE_FH);
if (IEEE80211_IS_CHAN_108A(c))
setbit(ic->ic_modecaps, IEEE80211_MODE_TURBO_A);
if (IEEE80211_IS_CHAN_108G(c))
setbit(ic->ic_modecaps, IEEE80211_MODE_TURBO_G);
if (IEEE80211_IS_CHAN_ST(c))
setbit(ic->ic_modecaps, IEEE80211_MODE_STURBO_A);
if (IEEE80211_IS_CHAN_HALF(c))
setbit(ic->ic_modecaps, IEEE80211_MODE_HALF);
if (IEEE80211_IS_CHAN_QUARTER(c))
setbit(ic->ic_modecaps, IEEE80211_MODE_QUARTER);
if (IEEE80211_IS_CHAN_HTA(c))
setbit(ic->ic_modecaps, IEEE80211_MODE_11NA);
if (IEEE80211_IS_CHAN_HTG(c))
setbit(ic->ic_modecaps, IEEE80211_MODE_11NG);
}
/* initialize candidate channels to all available */
memcpy(ic->ic_chan_active, ic->ic_chan_avail,
sizeof(ic->ic_chan_avail));
/* sort channel table to allow lookup optimizations */
ieee80211_sort_channels(ic->ic_channels, ic->ic_nchans);
/* invalidate any previous state */
ic->ic_bsschan = IEEE80211_CHAN_ANYC;
ic->ic_prevchan = NULL;
ic->ic_csa_newchan = NULL;
/* arbitrarily pick the first channel */
ic->ic_curchan = &ic->ic_channels[0];
ic->ic_rt = ieee80211_get_ratetable(ic->ic_curchan);
/* fillin well-known rate sets if driver has not specified */
DEFAULTRATES(IEEE80211_MODE_11B, ieee80211_rateset_11b);
DEFAULTRATES(IEEE80211_MODE_11G, ieee80211_rateset_11g);
DEFAULTRATES(IEEE80211_MODE_11A, ieee80211_rateset_11a);
DEFAULTRATES(IEEE80211_MODE_TURBO_A, ieee80211_rateset_11a);
DEFAULTRATES(IEEE80211_MODE_TURBO_G, ieee80211_rateset_11g);
DEFAULTRATES(IEEE80211_MODE_STURBO_A, ieee80211_rateset_11a);
DEFAULTRATES(IEEE80211_MODE_HALF, ieee80211_rateset_half);
DEFAULTRATES(IEEE80211_MODE_QUARTER, ieee80211_rateset_quarter);
DEFAULTRATES(IEEE80211_MODE_11NA, ieee80211_rateset_11a);
DEFAULTRATES(IEEE80211_MODE_11NG, ieee80211_rateset_11g);
/*
* Setup required information to fill the mcsset field, if driver did
* not. Assume a 2T2R setup for historic reasons.
*/
if (ic->ic_rxstream == 0)
ic->ic_rxstream = 2;
if (ic->ic_txstream == 0)
ic->ic_txstream = 2;
/*
* Set auto mode to reset active channel state and any desired channel.
*/
(void) ieee80211_setmode(ic, IEEE80211_MODE_AUTO);
#undef DEFAULTRATES
}
static void
null_update_mcast(struct ifnet *ifp)
{
if_printf(ifp, "need multicast update callback\n");
}
static void
null_update_promisc(struct ifnet *ifp)
{
if_printf(ifp, "need promiscuous mode update callback\n");
}
static int
null_transmit(struct ifnet *ifp, struct mbuf *m)
{
m_freem(m);
ifp->if_oerrors++;
return EACCES; /* XXX EIO/EPERM? */
}
static int
null_output(struct ifnet *ifp, struct mbuf *m,
struct sockaddr *dst, struct route *ro)
{
if_printf(ifp, "discard raw packet\n");
return null_transmit(ifp, m);
}
static void
null_input(struct ifnet *ifp, struct mbuf *m)
{
if_printf(ifp, "if_input should not be called\n");
m_freem(m);
}
static void
null_update_chw(struct ieee80211com *ic)
{
if_printf(ic->ic_ifp, "%s: need callback\n", __func__);
}
/*
* Attach/setup the common net80211 state. Called by
* the driver on attach to prior to creating any vap's.
*/
void
ieee80211_ifattach(struct ieee80211com *ic,
const uint8_t macaddr[IEEE80211_ADDR_LEN])
{
struct ifnet *ifp = ic->ic_ifp;
struct sockaddr_dl *sdl;
struct ifaddr *ifa;
KASSERT(ifp->if_type == IFT_IEEE80211, ("if_type %d", ifp->if_type));
IEEE80211_LOCK_INIT(ic, ifp->if_xname);
IEEE80211_TX_LOCK_INIT(ic, ifp->if_xname);
TAILQ_INIT(&ic->ic_vaps);
/* Create a taskqueue for all state changes */
ic->ic_tq = taskqueue_create("ic_taskq", M_WAITOK | M_ZERO,
taskqueue_thread_enqueue, &ic->ic_tq);
taskqueue_start_threads(&ic->ic_tq, 1, PI_NET, "%s net80211 taskq",
ifp->if_xname);
/*
* Fill in 802.11 available channel set, mark all
* available channels as active, and pick a default
* channel if not already specified.
*/
ieee80211_media_init(ic);
ic->ic_update_mcast = null_update_mcast;
ic->ic_update_promisc = null_update_promisc;
ic->ic_update_chw = null_update_chw;
ic->ic_hash_key = arc4random();
ic->ic_bintval = IEEE80211_BINTVAL_DEFAULT;
ic->ic_lintval = ic->ic_bintval;
ic->ic_txpowlimit = IEEE80211_TXPOWER_MAX;
ieee80211_crypto_attach(ic);
ieee80211_node_attach(ic);
ieee80211_power_attach(ic);
ieee80211_proto_attach(ic);
#ifdef IEEE80211_SUPPORT_SUPERG
ieee80211_superg_attach(ic);
#endif
ieee80211_ht_attach(ic);
ieee80211_scan_attach(ic);
ieee80211_regdomain_attach(ic);
ieee80211_dfs_attach(ic);
ieee80211_sysctl_attach(ic);
ifp->if_addrlen = IEEE80211_ADDR_LEN;
ifp->if_hdrlen = 0;
CURVNET_SET(vnet0);
if_attach(ifp);
ifp->if_mtu = IEEE80211_MTU_MAX;
ifp->if_broadcastaddr = ieee80211broadcastaddr;
ifp->if_output = null_output;
ifp->if_input = null_input; /* just in case */
ifp->if_resolvemulti = NULL; /* NB: callers check */
ifa = ifaddr_byindex(ifp->if_index);
KASSERT(ifa != NULL, ("%s: no lladdr!\n", __func__));
sdl = (struct sockaddr_dl *)ifa->ifa_addr;
sdl->sdl_type = IFT_ETHER; /* XXX IFT_IEEE80211? */
sdl->sdl_alen = IEEE80211_ADDR_LEN;
IEEE80211_ADDR_COPY(LLADDR(sdl), macaddr);
ifa_free(ifa);
CURVNET_RESTORE();
}
/*
* Detach net80211 state on device detach. Tear down
* all vap's and reclaim all common state prior to the
* device state going away. Note we may call back into
* driver; it must be prepared for this.
*/
void
ieee80211_ifdetach(struct ieee80211com *ic)
{
struct ifnet *ifp = ic->ic_ifp;
struct ieee80211vap *vap;
/*
* This detaches the main interface, but not the vaps.
* Each VAP may be in a separate VIMAGE.
*/
CURVNET_SET(ifp->if_vnet);
if_detach(ifp);
CURVNET_RESTORE();
/*
* The VAP is responsible for setting and clearing
* the VIMAGE context.
*/
while ((vap = TAILQ_FIRST(&ic->ic_vaps)) != NULL)
ieee80211_vap_destroy(vap);
ieee80211_waitfor_parent(ic);
ieee80211_sysctl_detach(ic);
ieee80211_dfs_detach(ic);
ieee80211_regdomain_detach(ic);
ieee80211_scan_detach(ic);
#ifdef IEEE80211_SUPPORT_SUPERG
ieee80211_superg_detach(ic);
#endif
ieee80211_ht_detach(ic);
/* NB: must be called before ieee80211_node_detach */
ieee80211_proto_detach(ic);
ieee80211_crypto_detach(ic);
ieee80211_power_detach(ic);
ieee80211_node_detach(ic);
/* XXX VNET needed? */
ifmedia_removeall(&ic->ic_media);
taskqueue_free(ic->ic_tq);
IEEE80211_TX_LOCK_DESTROY(ic);
IEEE80211_LOCK_DESTROY(ic);
}
/*
* Default reset method for use with the ioctl support. This
* method is invoked after any state change in the 802.11
* layer that should be propagated to the hardware but not
* require re-initialization of the 802.11 state machine (e.g
* rescanning for an ap). We always return ENETRESET which
* should cause the driver to re-initialize the device. Drivers
* can override this method to implement more optimized support.
*/
static int
default_reset(struct ieee80211vap *vap, u_long cmd)
{
return ENETRESET;
}
/*
* Prepare a vap for use. Drivers use this call to
* setup net80211 state in new vap's prior attaching
* them with ieee80211_vap_attach (below).
*/
int
ieee80211_vap_setup(struct ieee80211com *ic, struct ieee80211vap *vap,
const char name[IFNAMSIZ], int unit, enum ieee80211_opmode opmode,
int flags, const uint8_t bssid[IEEE80211_ADDR_LEN],
const uint8_t macaddr[IEEE80211_ADDR_LEN])
{
struct ifnet *ifp;
ifp = if_alloc(IFT_ETHER);
if (ifp == NULL) {
if_printf(ic->ic_ifp, "%s: unable to allocate ifnet\n",
__func__);
return ENOMEM;
}
if_initname(ifp, name, unit);
ifp->if_softc = vap; /* back pointer */
ifp->if_flags = IFF_SIMPLEX | IFF_BROADCAST | IFF_MULTICAST;
ifp->if_start = ieee80211_start;
ifp->if_ioctl = ieee80211_ioctl;
ifp->if_init = ieee80211_init;
/* NB: input+output filled in by ether_ifattach */
IFQ_SET_MAXLEN(&ifp->if_snd, ifqmaxlen);
ifp->if_snd.ifq_drv_maxlen = ifqmaxlen;
IFQ_SET_READY(&ifp->if_snd);
vap->iv_ifp = ifp;
vap->iv_ic = ic;
vap->iv_flags = ic->ic_flags; /* propagate common flags */
vap->iv_flags_ext = ic->ic_flags_ext;
vap->iv_flags_ven = ic->ic_flags_ven;
vap->iv_caps = ic->ic_caps &~ IEEE80211_C_OPMODE;
vap->iv_htcaps = ic->ic_htcaps;
vap->iv_htextcaps = ic->ic_htextcaps;
vap->iv_opmode = opmode;
vap->iv_caps |= ieee80211_opcap[opmode];
switch (opmode) {
case IEEE80211_M_WDS:
/*
* WDS links must specify the bssid of the far end.
* For legacy operation this is a static relationship.
* For non-legacy operation the station must associate
* and be authorized to pass traffic. Plumbing the
* vap to the proper node happens when the vap
* transitions to RUN state.
*/
IEEE80211_ADDR_COPY(vap->iv_des_bssid, bssid);
vap->iv_flags |= IEEE80211_F_DESBSSID;
if (flags & IEEE80211_CLONE_WDSLEGACY)
vap->iv_flags_ext |= IEEE80211_FEXT_WDSLEGACY;
break;
#ifdef IEEE80211_SUPPORT_TDMA
case IEEE80211_M_AHDEMO:
if (flags & IEEE80211_CLONE_TDMA) {
/* NB: checked before clone operation allowed */
KASSERT(ic->ic_caps & IEEE80211_C_TDMA,
("not TDMA capable, ic_caps 0x%x", ic->ic_caps));
/*
* Propagate TDMA capability to mark vap; this
* cannot be removed and is used to distinguish
* regular ahdemo operation from ahdemo+tdma.
*/
vap->iv_caps |= IEEE80211_C_TDMA;
}
break;
#endif
default:
break;
}
/* auto-enable s/w beacon miss support */
if (flags & IEEE80211_CLONE_NOBEACONS)
vap->iv_flags_ext |= IEEE80211_FEXT_SWBMISS;
/* auto-generated or user supplied MAC address */
if (flags & (IEEE80211_CLONE_BSSID|IEEE80211_CLONE_MACADDR))
vap->iv_flags_ext |= IEEE80211_FEXT_UNIQMAC;
/*
* Enable various functionality by default if we're
* capable; the driver can override us if it knows better.
*/
if (vap->iv_caps & IEEE80211_C_WME)
vap->iv_flags |= IEEE80211_F_WME;
if (vap->iv_caps & IEEE80211_C_BURST)
vap->iv_flags |= IEEE80211_F_BURST;
/* NB: bg scanning only makes sense for station mode right now */
if (vap->iv_opmode == IEEE80211_M_STA &&
(vap->iv_caps & IEEE80211_C_BGSCAN))
vap->iv_flags |= IEEE80211_F_BGSCAN;
vap->iv_flags |= IEEE80211_F_DOTH; /* XXX no cap, just ena */
/* NB: DFS support only makes sense for ap mode right now */
if (vap->iv_opmode == IEEE80211_M_HOSTAP &&
(vap->iv_caps & IEEE80211_C_DFS))
vap->iv_flags_ext |= IEEE80211_FEXT_DFS;
vap->iv_des_chan = IEEE80211_CHAN_ANYC; /* any channel is ok */
vap->iv_bmissthreshold = IEEE80211_HWBMISS_DEFAULT;
vap->iv_dtim_period = IEEE80211_DTIM_DEFAULT;
/*
* Install a default reset method for the ioctl support;
* the driver can override this.
*/
vap->iv_reset = default_reset;
IEEE80211_ADDR_COPY(vap->iv_myaddr, macaddr);
ieee80211_sysctl_vattach(vap);
ieee80211_crypto_vattach(vap);
ieee80211_node_vattach(vap);
ieee80211_power_vattach(vap);
ieee80211_proto_vattach(vap);
#ifdef IEEE80211_SUPPORT_SUPERG
ieee80211_superg_vattach(vap);
#endif
ieee80211_ht_vattach(vap);
ieee80211_scan_vattach(vap);
ieee80211_regdomain_vattach(vap);
ieee80211_radiotap_vattach(vap);
ieee80211_ratectl_set(vap, IEEE80211_RATECTL_NONE);
return 0;
}
/*
* Activate a vap. State should have been prepared with a
* call to ieee80211_vap_setup and by the driver. On return
* from this call the vap is ready for use.
*/
int
ieee80211_vap_attach(struct ieee80211vap *vap,
ifm_change_cb_t media_change, ifm_stat_cb_t media_stat)
{
struct ifnet *ifp = vap->iv_ifp;
struct ieee80211com *ic = vap->iv_ic;
struct ifmediareq imr;
int maxrate;
IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE,
"%s: %s parent %s flags 0x%x flags_ext 0x%x\n",
__func__, ieee80211_opmode_name[vap->iv_opmode],
ic->ic_ifp->if_xname, vap->iv_flags, vap->iv_flags_ext);
/*
* Do late attach work that cannot happen until after
* the driver has had a chance to override defaults.
*/
ieee80211_node_latevattach(vap);
ieee80211_power_latevattach(vap);
maxrate = ieee80211_media_setup(ic, &vap->iv_media, vap->iv_caps,
vap->iv_opmode == IEEE80211_M_STA, media_change, media_stat);
ieee80211_media_status(ifp, &imr);
/* NB: strip explicit mode; we're actually in autoselect */
ifmedia_set(&vap->iv_media,
imr.ifm_active &~ (IFM_MMASK | IFM_IEEE80211_TURBO));
if (maxrate)
ifp->if_baudrate = IF_Mbps(maxrate);
ether_ifattach(ifp, vap->iv_myaddr);
if (vap->iv_opmode == IEEE80211_M_MONITOR) {
/* NB: disallow transmit */
ifp->if_transmit = null_transmit;
ifp->if_output = null_output;
} else {
/* hook output method setup by ether_ifattach */
vap->iv_output = ifp->if_output;
ifp->if_output = ieee80211_output;
}
/* NB: if_mtu set by ether_ifattach to ETHERMTU */
IEEE80211_LOCK(ic);
TAILQ_INSERT_TAIL(&ic->ic_vaps, vap, iv_next);
ieee80211_syncflag_locked(ic, IEEE80211_F_WME);
#ifdef IEEE80211_SUPPORT_SUPERG
ieee80211_syncflag_locked(ic, IEEE80211_F_TURBOP);
#endif
ieee80211_syncflag_locked(ic, IEEE80211_F_PCF);
ieee80211_syncflag_locked(ic, IEEE80211_F_BURST);
ieee80211_syncflag_ht_locked(ic, IEEE80211_FHT_HT);
ieee80211_syncflag_ht_locked(ic, IEEE80211_FHT_USEHT40);
ieee80211_syncifflag_locked(ic, IFF_PROMISC);
ieee80211_syncifflag_locked(ic, IFF_ALLMULTI);
IEEE80211_UNLOCK(ic);
return 1;
}
/*
* Tear down vap state and reclaim the ifnet.
* The driver is assumed to have prepared for
* this; e.g. by turning off interrupts for the
* underlying device.
*/
void
ieee80211_vap_detach(struct ieee80211vap *vap)
{
struct ieee80211com *ic = vap->iv_ic;
struct ifnet *ifp = vap->iv_ifp;
CURVNET_SET(ifp->if_vnet);
IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: %s parent %s\n",
__func__, ieee80211_opmode_name[vap->iv_opmode],
ic->ic_ifp->if_xname);
/* NB: bpfdetach is called by ether_ifdetach and claims all taps */
ether_ifdetach(ifp);
ieee80211_stop(vap);
/*
* Flush any deferred vap tasks.
*/
ieee80211_draintask(ic, &vap->iv_nstate_task);
ieee80211_draintask(ic, &vap->iv_swbmiss_task);
/* XXX band-aid until ifnet handles this for us */
taskqueue_drain(taskqueue_swi, &ifp->if_linktask);
IEEE80211_LOCK(ic);
KASSERT(vap->iv_state == IEEE80211_S_INIT , ("vap still running"));
TAILQ_REMOVE(&ic->ic_vaps, vap, iv_next);
ieee80211_syncflag_locked(ic, IEEE80211_F_WME);
#ifdef IEEE80211_SUPPORT_SUPERG
ieee80211_syncflag_locked(ic, IEEE80211_F_TURBOP);
#endif
ieee80211_syncflag_locked(ic, IEEE80211_F_PCF);
ieee80211_syncflag_locked(ic, IEEE80211_F_BURST);
ieee80211_syncflag_ht_locked(ic, IEEE80211_FHT_HT);
ieee80211_syncflag_ht_locked(ic, IEEE80211_FHT_USEHT40);
/* NB: this handles the bpfdetach done below */
ieee80211_syncflag_ext_locked(ic, IEEE80211_FEXT_BPF);
ieee80211_syncifflag_locked(ic, IFF_PROMISC);
ieee80211_syncifflag_locked(ic, IFF_ALLMULTI);
IEEE80211_UNLOCK(ic);
ifmedia_removeall(&vap->iv_media);
ieee80211_radiotap_vdetach(vap);
ieee80211_regdomain_vdetach(vap);
ieee80211_scan_vdetach(vap);
#ifdef IEEE80211_SUPPORT_SUPERG
ieee80211_superg_vdetach(vap);
#endif
ieee80211_ht_vdetach(vap);
/* NB: must be before ieee80211_node_vdetach */
ieee80211_proto_vdetach(vap);
ieee80211_crypto_vdetach(vap);
ieee80211_power_vdetach(vap);
ieee80211_node_vdetach(vap);
ieee80211_sysctl_vdetach(vap);
if_free(ifp);
CURVNET_RESTORE();
}
/*
* Synchronize flag bit state in the parent ifnet structure
* according to the state of all vap ifnet's. This is used,
* for example, to handle IFF_PROMISC and IFF_ALLMULTI.
*/
void
ieee80211_syncifflag_locked(struct ieee80211com *ic, int flag)
{
struct ifnet *ifp = ic->ic_ifp;
struct ieee80211vap *vap;
int bit, oflags;
IEEE80211_LOCK_ASSERT(ic);
bit = 0;
TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next)
if (vap->iv_ifp->if_flags & flag) {
/*
* XXX the bridge sets PROMISC but we don't want to
* enable it on the device, discard here so all the
* drivers don't need to special-case it
*/
if (flag == IFF_PROMISC &&
!(vap->iv_opmode == IEEE80211_M_MONITOR ||
(vap->iv_opmode == IEEE80211_M_AHDEMO &&
(vap->iv_caps & IEEE80211_C_TDMA) == 0)))
continue;
bit = 1;
break;
}
oflags = ifp->if_flags;
if (bit)
ifp->if_flags |= flag;
else
ifp->if_flags &= ~flag;
if ((ifp->if_flags ^ oflags) & flag) {
/* XXX should we return 1/0 and let caller do this? */
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
if (flag == IFF_PROMISC)
ieee80211_runtask(ic, &ic->ic_promisc_task);
else if (flag == IFF_ALLMULTI)
ieee80211_runtask(ic, &ic->ic_mcast_task);
}
}
}
/*
* Synchronize flag bit state in the com structure
* according to the state of all vap's. This is used,
* for example, to handle state changes via ioctls.
*/
static void
ieee80211_syncflag_locked(struct ieee80211com *ic, int flag)
{
struct ieee80211vap *vap;
int bit;
IEEE80211_LOCK_ASSERT(ic);
bit = 0;
TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next)
if (vap->iv_flags & flag) {
bit = 1;
break;
}
if (bit)
ic->ic_flags |= flag;
else
ic->ic_flags &= ~flag;
}
void
ieee80211_syncflag(struct ieee80211vap *vap, int flag)
{
struct ieee80211com *ic = vap->iv_ic;
IEEE80211_LOCK(ic);
if (flag < 0) {
flag = -flag;
vap->iv_flags &= ~flag;
} else
vap->iv_flags |= flag;
ieee80211_syncflag_locked(ic, flag);
IEEE80211_UNLOCK(ic);
}
/*
* Synchronize flags_ht bit state in the com structure
* according to the state of all vap's. This is used,
* for example, to handle state changes via ioctls.
*/
static void
ieee80211_syncflag_ht_locked(struct ieee80211com *ic, int flag)
{
struct ieee80211vap *vap;
int bit;
IEEE80211_LOCK_ASSERT(ic);
bit = 0;
TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next)
if (vap->iv_flags_ht & flag) {
bit = 1;
break;
}
if (bit)
ic->ic_flags_ht |= flag;
else
ic->ic_flags_ht &= ~flag;
}
void
ieee80211_syncflag_ht(struct ieee80211vap *vap, int flag)
{
struct ieee80211com *ic = vap->iv_ic;
IEEE80211_LOCK(ic);
if (flag < 0) {
flag = -flag;
vap->iv_flags_ht &= ~flag;
} else
vap->iv_flags_ht |= flag;
ieee80211_syncflag_ht_locked(ic, flag);
IEEE80211_UNLOCK(ic);
}
/*
* Synchronize flags_ext bit state in the com structure
* according to the state of all vap's. This is used,
* for example, to handle state changes via ioctls.
*/
static void
ieee80211_syncflag_ext_locked(struct ieee80211com *ic, int flag)
{
struct ieee80211vap *vap;
int bit;
IEEE80211_LOCK_ASSERT(ic);
bit = 0;
TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next)
if (vap->iv_flags_ext & flag) {
bit = 1;
break;
}
if (bit)
ic->ic_flags_ext |= flag;
else
ic->ic_flags_ext &= ~flag;
}
void
ieee80211_syncflag_ext(struct ieee80211vap *vap, int flag)
{
struct ieee80211com *ic = vap->iv_ic;
IEEE80211_LOCK(ic);
if (flag < 0) {
flag = -flag;
vap->iv_flags_ext &= ~flag;
} else
vap->iv_flags_ext |= flag;
ieee80211_syncflag_ext_locked(ic, flag);
IEEE80211_UNLOCK(ic);
}
static __inline int
mapgsm(u_int freq, u_int flags)
{
freq *= 10;
if (flags & IEEE80211_CHAN_QUARTER)
freq += 5;
else if (flags & IEEE80211_CHAN_HALF)
freq += 10;
else
freq += 20;
/* NB: there is no 907/20 wide but leave room */
return (freq - 906*10) / 5;
}
static __inline int
mappsb(u_int freq, u_int flags)
{
return 37 + ((freq * 10) + ((freq % 5) == 2 ? 5 : 0) - 49400) / 5;
}
/*
* Convert MHz frequency to IEEE channel number.
*/
int
ieee80211_mhz2ieee(u_int freq, u_int flags)
{
#define IS_FREQ_IN_PSB(_freq) ((_freq) > 4940 && (_freq) < 4990)
if (flags & IEEE80211_CHAN_GSM)
return mapgsm(freq, flags);
if (flags & IEEE80211_CHAN_2GHZ) { /* 2GHz band */
if (freq == 2484)
return 14;
if (freq < 2484)
return ((int) freq - 2407) / 5;
else
return 15 + ((freq - 2512) / 20);
} else if (flags & IEEE80211_CHAN_5GHZ) { /* 5Ghz band */
if (freq <= 5000) {
/* XXX check regdomain? */
if (IS_FREQ_IN_PSB(freq))
return mappsb(freq, flags);
return (freq - 4000) / 5;
} else
return (freq - 5000) / 5;
} else { /* either, guess */
if (freq == 2484)
return 14;
if (freq < 2484) {
if (907 <= freq && freq <= 922)
return mapgsm(freq, flags);
return ((int) freq - 2407) / 5;
}
if (freq < 5000) {
if (IS_FREQ_IN_PSB(freq))
return mappsb(freq, flags);
else if (freq > 4900)
return (freq - 4000) / 5;
else
return 15 + ((freq - 2512) / 20);
}
return (freq - 5000) / 5;
}
#undef IS_FREQ_IN_PSB
}
/*
* Convert channel to IEEE channel number.
*/
int
ieee80211_chan2ieee(struct ieee80211com *ic, const struct ieee80211_channel *c)
{
if (c == NULL) {
if_printf(ic->ic_ifp, "invalid channel (NULL)\n");
return 0; /* XXX */
}
return (c == IEEE80211_CHAN_ANYC ? IEEE80211_CHAN_ANY : c->ic_ieee);
}
/*
* Convert IEEE channel number to MHz frequency.
*/
u_int
ieee80211_ieee2mhz(u_int chan, u_int flags)
{
if (flags & IEEE80211_CHAN_GSM)
return 907 + 5 * (chan / 10);
if (flags & IEEE80211_CHAN_2GHZ) { /* 2GHz band */
if (chan == 14)
return 2484;
if (chan < 14)
return 2407 + chan*5;
else
return 2512 + ((chan-15)*20);
} else if (flags & IEEE80211_CHAN_5GHZ) {/* 5Ghz band */
if (flags & (IEEE80211_CHAN_HALF|IEEE80211_CHAN_QUARTER)) {
chan -= 37;
return 4940 + chan*5 + (chan % 5 ? 2 : 0);
}
return 5000 + (chan*5);
} else { /* either, guess */
/* XXX can't distinguish PSB+GSM channels */
if (chan == 14)
return 2484;
if (chan < 14) /* 0-13 */
return 2407 + chan*5;
if (chan < 27) /* 15-26 */
return 2512 + ((chan-15)*20);
return 5000 + (chan*5);
}
}
/*
* Locate a channel given a frequency+flags. We cache
* the previous lookup to optimize switching between two
* channels--as happens with dynamic turbo.
*/
struct ieee80211_channel *
ieee80211_find_channel(struct ieee80211com *ic, int freq, int flags)
{
struct ieee80211_channel *c;
int i;
flags &= IEEE80211_CHAN_ALLTURBO;
c = ic->ic_prevchan;
if (c != NULL && c->ic_freq == freq &&
(c->ic_flags & IEEE80211_CHAN_ALLTURBO) == flags)
return c;
/* brute force search */
for (i = 0; i < ic->ic_nchans; i++) {
c = &ic->ic_channels[i];
if (c->ic_freq == freq &&
(c->ic_flags & IEEE80211_CHAN_ALLTURBO) == flags)
return c;
}
return NULL;
}
/*
* Locate a channel given a channel number+flags. We cache
* the previous lookup to optimize switching between two
* channels--as happens with dynamic turbo.
*/
struct ieee80211_channel *
ieee80211_find_channel_byieee(struct ieee80211com *ic, int ieee, int flags)
{
struct ieee80211_channel *c;
int i;
flags &= IEEE80211_CHAN_ALLTURBO;
c = ic->ic_prevchan;
if (c != NULL && c->ic_ieee == ieee &&
(c->ic_flags & IEEE80211_CHAN_ALLTURBO) == flags)
return c;
/* brute force search */
for (i = 0; i < ic->ic_nchans; i++) {
c = &ic->ic_channels[i];
if (c->ic_ieee == ieee &&
(c->ic_flags & IEEE80211_CHAN_ALLTURBO) == flags)
return c;
}
return NULL;
}
static void
addmedia(struct ifmedia *media, int caps, int addsta, int mode, int mword)
{
#define ADD(_ic, _s, _o) \
ifmedia_add(media, \
IFM_MAKEWORD(IFM_IEEE80211, (_s), (_o), 0), 0, NULL)
static const u_int mopts[IEEE80211_MODE_MAX] = {
[IEEE80211_MODE_AUTO] = IFM_AUTO,
[IEEE80211_MODE_11A] = IFM_IEEE80211_11A,
[IEEE80211_MODE_11B] = IFM_IEEE80211_11B,
[IEEE80211_MODE_11G] = IFM_IEEE80211_11G,
[IEEE80211_MODE_FH] = IFM_IEEE80211_FH,
[IEEE80211_MODE_TURBO_A] = IFM_IEEE80211_11A|IFM_IEEE80211_TURBO,
[IEEE80211_MODE_TURBO_G] = IFM_IEEE80211_11G|IFM_IEEE80211_TURBO,
[IEEE80211_MODE_STURBO_A] = IFM_IEEE80211_11A|IFM_IEEE80211_TURBO,
[IEEE80211_MODE_HALF] = IFM_IEEE80211_11A, /* XXX */
[IEEE80211_MODE_QUARTER] = IFM_IEEE80211_11A, /* XXX */
[IEEE80211_MODE_11NA] = IFM_IEEE80211_11NA,
[IEEE80211_MODE_11NG] = IFM_IEEE80211_11NG,
};
u_int mopt;
mopt = mopts[mode];
if (addsta)
ADD(ic, mword, mopt); /* STA mode has no cap */
if (caps & IEEE80211_C_IBSS)
ADD(media, mword, mopt | IFM_IEEE80211_ADHOC);
if (caps & IEEE80211_C_HOSTAP)
ADD(media, mword, mopt | IFM_IEEE80211_HOSTAP);
if (caps & IEEE80211_C_AHDEMO)
ADD(media, mword, mopt | IFM_IEEE80211_ADHOC | IFM_FLAG0);
if (caps & IEEE80211_C_MONITOR)
ADD(media, mword, mopt | IFM_IEEE80211_MONITOR);
if (caps & IEEE80211_C_WDS)
ADD(media, mword, mopt | IFM_IEEE80211_WDS);
if (caps & IEEE80211_C_MBSS)
ADD(media, mword, mopt | IFM_IEEE80211_MBSS);
#undef ADD
}
/*
* Setup the media data structures according to the channel and
* rate tables.
*/
static int
ieee80211_media_setup(struct ieee80211com *ic,
struct ifmedia *media, int caps, int addsta,
ifm_change_cb_t media_change, ifm_stat_cb_t media_stat)
{
int i, j, rate, maxrate, mword, r;
enum ieee80211_phymode mode;
const struct ieee80211_rateset *rs;
struct ieee80211_rateset allrates;
/*
* Fill in media characteristics.
*/
ifmedia_init(media, 0, media_change, media_stat);
maxrate = 0;
/*
* Add media for legacy operating modes.
*/
memset(&allrates, 0, sizeof(allrates));
for (mode = IEEE80211_MODE_AUTO; mode < IEEE80211_MODE_11NA; mode++) {
if (isclr(ic->ic_modecaps, mode))
continue;
addmedia(media, caps, addsta, mode, IFM_AUTO);
if (mode == IEEE80211_MODE_AUTO)
continue;
rs = &ic->ic_sup_rates[mode];
for (i = 0; i < rs->rs_nrates; i++) {
rate = rs->rs_rates[i];
mword = ieee80211_rate2media(ic, rate, mode);
if (mword == 0)
continue;
addmedia(media, caps, addsta, mode, mword);
/*
* Add legacy rate to the collection of all rates.
*/
r = rate & IEEE80211_RATE_VAL;
for (j = 0; j < allrates.rs_nrates; j++)
if (allrates.rs_rates[j] == r)
break;
if (j == allrates.rs_nrates) {
/* unique, add to the set */
allrates.rs_rates[j] = r;
allrates.rs_nrates++;
}
rate = (rate & IEEE80211_RATE_VAL) / 2;
if (rate > maxrate)
maxrate = rate;
}
}
for (i = 0; i < allrates.rs_nrates; i++) {
mword = ieee80211_rate2media(ic, allrates.rs_rates[i],
IEEE80211_MODE_AUTO);
if (mword == 0)
continue;
/* NB: remove media options from mword */
addmedia(media, caps, addsta,
IEEE80211_MODE_AUTO, IFM_SUBTYPE(mword));
}
/*
* Add HT/11n media. Note that we do not have enough
* bits in the media subtype to express the MCS so we
* use a "placeholder" media subtype and any fixed MCS
* must be specified with a different mechanism.
*/
for (; mode <= IEEE80211_MODE_11NG; mode++) {
if (isclr(ic->ic_modecaps, mode))
continue;
addmedia(media, caps, addsta, mode, IFM_AUTO);
addmedia(media, caps, addsta, mode, IFM_IEEE80211_MCS);
}
if (isset(ic->ic_modecaps, IEEE80211_MODE_11NA) ||
isset(ic->ic_modecaps, IEEE80211_MODE_11NG)) {
addmedia(media, caps, addsta,
IEEE80211_MODE_AUTO, IFM_IEEE80211_MCS);
i = ic->ic_txstream * 8 - 1;
if ((ic->ic_htcaps & IEEE80211_HTCAP_CHWIDTH40) &&
(ic->ic_htcaps & IEEE80211_HTCAP_SHORTGI40))
rate = ieee80211_htrates[i].ht40_rate_400ns;
else if ((ic->ic_htcaps & IEEE80211_HTCAP_CHWIDTH40))
rate = ieee80211_htrates[i].ht40_rate_800ns;
else if ((ic->ic_htcaps & IEEE80211_HTCAP_SHORTGI20))
rate = ieee80211_htrates[i].ht20_rate_400ns;
else
rate = ieee80211_htrates[i].ht20_rate_800ns;
if (rate > maxrate)
maxrate = rate;
}
return maxrate;
}
void
ieee80211_media_init(struct ieee80211com *ic)
{
struct ifnet *ifp = ic->ic_ifp;
int maxrate;
/* NB: this works because the structure is initialized to zero */
if (!LIST_EMPTY(&ic->ic_media.ifm_list)) {
/*
* We are re-initializing the channel list; clear
* the existing media state as the media routines
* don't suppress duplicates.
*/
ifmedia_removeall(&ic->ic_media);
}
ieee80211_chan_init(ic);
/*
* Recalculate media settings in case new channel list changes
* the set of available modes.
*/
maxrate = ieee80211_media_setup(ic, &ic->ic_media, ic->ic_caps, 1,
ieee80211com_media_change, ieee80211com_media_status);
/* NB: strip explicit mode; we're actually in autoselect */
ifmedia_set(&ic->ic_media,
media_status(ic->ic_opmode, ic->ic_curchan) &~
(IFM_MMASK | IFM_IEEE80211_TURBO));
if (maxrate)
ifp->if_baudrate = IF_Mbps(maxrate);
/* XXX need to propagate new media settings to vap's */
}
/* XXX inline or eliminate? */
const struct ieee80211_rateset *
ieee80211_get_suprates(struct ieee80211com *ic, const struct ieee80211_channel *c)
{
/* XXX does this work for 11ng basic rates? */
return &ic->ic_sup_rates[ieee80211_chan2mode(c)];
}
void
ieee80211_announce(struct ieee80211com *ic)
{
struct ifnet *ifp = ic->ic_ifp;
int i, rate, mword;
enum ieee80211_phymode mode;
const struct ieee80211_rateset *rs;
/* NB: skip AUTO since it has no rates */
for (mode = IEEE80211_MODE_AUTO+1; mode < IEEE80211_MODE_11NA; mode++) {
if (isclr(ic->ic_modecaps, mode))
continue;
if_printf(ifp, "%s rates: ", ieee80211_phymode_name[mode]);
rs = &ic->ic_sup_rates[mode];
for (i = 0; i < rs->rs_nrates; i++) {
mword = ieee80211_rate2media(ic, rs->rs_rates[i], mode);
if (mword == 0)
continue;
rate = ieee80211_media2rate(mword);
printf("%s%d%sMbps", (i != 0 ? " " : ""),
rate / 2, ((rate & 0x1) != 0 ? ".5" : ""));
}
printf("\n");
}
ieee80211_ht_announce(ic);
}
void
ieee80211_announce_channels(struct ieee80211com *ic)
{
const struct ieee80211_channel *c;
char type;
int i, cw;
printf("Chan Freq CW RegPwr MinPwr MaxPwr\n");
for (i = 0; i < ic->ic_nchans; i++) {
c = &ic->ic_channels[i];
if (IEEE80211_IS_CHAN_ST(c))
type = 'S';
else if (IEEE80211_IS_CHAN_108A(c))
type = 'T';
else if (IEEE80211_IS_CHAN_108G(c))
type = 'G';
else if (IEEE80211_IS_CHAN_HT(c))
type = 'n';
else if (IEEE80211_IS_CHAN_A(c))
type = 'a';
else if (IEEE80211_IS_CHAN_ANYG(c))
type = 'g';
else if (IEEE80211_IS_CHAN_B(c))
type = 'b';
else
type = 'f';
if (IEEE80211_IS_CHAN_HT40(c) || IEEE80211_IS_CHAN_TURBO(c))
cw = 40;
else if (IEEE80211_IS_CHAN_HALF(c))
cw = 10;
else if (IEEE80211_IS_CHAN_QUARTER(c))
cw = 5;
else
cw = 20;
printf("%4d %4d%c %2d%c %6d %4d.%d %4d.%d\n"
, c->ic_ieee, c->ic_freq, type
, cw
, IEEE80211_IS_CHAN_HT40U(c) ? '+' :
IEEE80211_IS_CHAN_HT40D(c) ? '-' : ' '
, c->ic_maxregpower
, c->ic_minpower / 2, c->ic_minpower & 1 ? 5 : 0
, c->ic_maxpower / 2, c->ic_maxpower & 1 ? 5 : 0
);
}
}
static int
media2mode(const struct ifmedia_entry *ime, uint32_t flags, uint16_t *mode)
{
switch (IFM_MODE(ime->ifm_media)) {
case IFM_IEEE80211_11A:
*mode = IEEE80211_MODE_11A;
break;
case IFM_IEEE80211_11B:
*mode = IEEE80211_MODE_11B;
break;
case IFM_IEEE80211_11G:
*mode = IEEE80211_MODE_11G;
break;
case IFM_IEEE80211_FH:
*mode = IEEE80211_MODE_FH;
break;
case IFM_IEEE80211_11NA:
*mode = IEEE80211_MODE_11NA;
break;
case IFM_IEEE80211_11NG:
*mode = IEEE80211_MODE_11NG;
break;
case IFM_AUTO:
*mode = IEEE80211_MODE_AUTO;
break;
default:
return 0;
}
/*
* Turbo mode is an ``option''.
* XXX does not apply to AUTO
*/
if (ime->ifm_media & IFM_IEEE80211_TURBO) {
if (*mode == IEEE80211_MODE_11A) {
if (flags & IEEE80211_F_TURBOP)
*mode = IEEE80211_MODE_TURBO_A;
else
*mode = IEEE80211_MODE_STURBO_A;
} else if (*mode == IEEE80211_MODE_11G)
*mode = IEEE80211_MODE_TURBO_G;
else
return 0;
}
/* XXX HT40 +/- */
return 1;
}
/*
* Handle a media change request on the underlying interface.
*/
int
ieee80211com_media_change(struct ifnet *ifp)
{
return EINVAL;
}
/*
* Handle a media change request on the vap interface.
*/
int
ieee80211_media_change(struct ifnet *ifp)
{
struct ieee80211vap *vap = ifp->if_softc;
struct ifmedia_entry *ime = vap->iv_media.ifm_cur;
uint16_t newmode;
if (!media2mode(ime, vap->iv_flags, &newmode))
return EINVAL;
if (vap->iv_des_mode != newmode) {
vap->iv_des_mode = newmode;
/* XXX kick state machine if up+running */
}
return 0;
}
/*
* Common code to calculate the media status word
* from the operating mode and channel state.
*/
static int
media_status(enum ieee80211_opmode opmode, const struct ieee80211_channel *chan)
{
int status;
status = IFM_IEEE80211;
switch (opmode) {
case IEEE80211_M_STA:
break;
case IEEE80211_M_IBSS:
status |= IFM_IEEE80211_ADHOC;
break;
case IEEE80211_M_HOSTAP:
status |= IFM_IEEE80211_HOSTAP;
break;
case IEEE80211_M_MONITOR:
status |= IFM_IEEE80211_MONITOR;
break;
case IEEE80211_M_AHDEMO:
status |= IFM_IEEE80211_ADHOC | IFM_FLAG0;
break;
case IEEE80211_M_WDS:
status |= IFM_IEEE80211_WDS;
break;
case IEEE80211_M_MBSS:
status |= IFM_IEEE80211_MBSS;
break;
}
if (IEEE80211_IS_CHAN_HTA(chan)) {
status |= IFM_IEEE80211_11NA;
} else if (IEEE80211_IS_CHAN_HTG(chan)) {
status |= IFM_IEEE80211_11NG;
} else if (IEEE80211_IS_CHAN_A(chan)) {
status |= IFM_IEEE80211_11A;
} else if (IEEE80211_IS_CHAN_B(chan)) {
status |= IFM_IEEE80211_11B;
} else if (IEEE80211_IS_CHAN_ANYG(chan)) {
status |= IFM_IEEE80211_11G;
} else if (IEEE80211_IS_CHAN_FHSS(chan)) {
status |= IFM_IEEE80211_FH;
}
/* XXX else complain? */
if (IEEE80211_IS_CHAN_TURBO(chan))
status |= IFM_IEEE80211_TURBO;
#if 0
if (IEEE80211_IS_CHAN_HT20(chan))
status |= IFM_IEEE80211_HT20;
if (IEEE80211_IS_CHAN_HT40(chan))
status |= IFM_IEEE80211_HT40;
#endif
return status;
}
static void
ieee80211com_media_status(struct ifnet *ifp, struct ifmediareq *imr)
{
struct ieee80211com *ic = ifp->if_l2com;
struct ieee80211vap *vap;
imr->ifm_status = IFM_AVALID;
TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next)
if (vap->iv_ifp->if_flags & IFF_UP) {
imr->ifm_status |= IFM_ACTIVE;
break;
}
imr->ifm_active = media_status(ic->ic_opmode, ic->ic_curchan);
if (imr->ifm_status & IFM_ACTIVE)
imr->ifm_current = imr->ifm_active;
}
void
ieee80211_media_status(struct ifnet *ifp, struct ifmediareq *imr)
{
struct ieee80211vap *vap = ifp->if_softc;
struct ieee80211com *ic = vap->iv_ic;
enum ieee80211_phymode mode;
imr->ifm_status = IFM_AVALID;
/*
* NB: use the current channel's mode to lock down a xmit
* rate only when running; otherwise we may have a mismatch
* in which case the rate will not be convertible.
*/
if (vap->iv_state == IEEE80211_S_RUN) {
imr->ifm_status |= IFM_ACTIVE;
mode = ieee80211_chan2mode(ic->ic_curchan);
} else
mode = IEEE80211_MODE_AUTO;
imr->ifm_active = media_status(vap->iv_opmode, ic->ic_curchan);
/*
* Calculate a current rate if possible.
*/
if (vap->iv_txparms[mode].ucastrate != IEEE80211_FIXED_RATE_NONE) {
/*
* A fixed rate is set, report that.
*/
imr->ifm_active |= ieee80211_rate2media(ic,
vap->iv_txparms[mode].ucastrate, mode);
} else if (vap->iv_opmode == IEEE80211_M_STA) {
/*
* In station mode report the current transmit rate.
*/
imr->ifm_active |= ieee80211_rate2media(ic,
vap->iv_bss->ni_txrate, mode);
} else
imr->ifm_active |= IFM_AUTO;
if (imr->ifm_status & IFM_ACTIVE)
imr->ifm_current = imr->ifm_active;
}
/*
* Set the current phy mode and recalculate the active channel
* set based on the available channels for this mode. Also
* select a new default/current channel if the current one is
* inappropriate for this mode.
*/
int
ieee80211_setmode(struct ieee80211com *ic, enum ieee80211_phymode mode)
{
/*
* Adjust basic rates in 11b/11g supported rate set.
* Note that if operating on a hal/quarter rate channel
* this is a noop as those rates sets are different
* and used instead.
*/
if (mode == IEEE80211_MODE_11G || mode == IEEE80211_MODE_11B)
ieee80211_setbasicrates(&ic->ic_sup_rates[mode], mode);
ic->ic_curmode = mode;
ieee80211_reset_erp(ic); /* reset ERP state */
return 0;
}
/*
* Return the phy mode for with the specified channel.
*/
enum ieee80211_phymode
ieee80211_chan2mode(const struct ieee80211_channel *chan)
{
if (IEEE80211_IS_CHAN_HTA(chan))
return IEEE80211_MODE_11NA;
else if (IEEE80211_IS_CHAN_HTG(chan))
return IEEE80211_MODE_11NG;
else if (IEEE80211_IS_CHAN_108G(chan))
return IEEE80211_MODE_TURBO_G;
else if (IEEE80211_IS_CHAN_ST(chan))
return IEEE80211_MODE_STURBO_A;
else if (IEEE80211_IS_CHAN_TURBO(chan))
return IEEE80211_MODE_TURBO_A;
else if (IEEE80211_IS_CHAN_HALF(chan))
return IEEE80211_MODE_HALF;
else if (IEEE80211_IS_CHAN_QUARTER(chan))
return IEEE80211_MODE_QUARTER;
else if (IEEE80211_IS_CHAN_A(chan))
return IEEE80211_MODE_11A;
else if (IEEE80211_IS_CHAN_ANYG(chan))
return IEEE80211_MODE_11G;
else if (IEEE80211_IS_CHAN_B(chan))
return IEEE80211_MODE_11B;
else if (IEEE80211_IS_CHAN_FHSS(chan))
return IEEE80211_MODE_FH;
/* NB: should not get here */
printf("%s: cannot map channel to mode; freq %u flags 0x%x\n",
__func__, chan->ic_freq, chan->ic_flags);
return IEEE80211_MODE_11B;
}
struct ratemedia {
u_int match; /* rate + mode */
u_int media; /* if_media rate */
};
static int
findmedia(const struct ratemedia rates[], int n, u_int match)
{
int i;
for (i = 0; i < n; i++)
if (rates[i].match == match)
return rates[i].media;
return IFM_AUTO;
}
/*
* Convert IEEE80211 rate value to ifmedia subtype.
* Rate is either a legacy rate in units of 0.5Mbps
* or an MCS index.
*/
int
ieee80211_rate2media(struct ieee80211com *ic, int rate, enum ieee80211_phymode mode)
{
#define N(a) (sizeof(a) / sizeof(a[0]))
static const struct ratemedia rates[] = {
{ 2 | IFM_IEEE80211_FH, IFM_IEEE80211_FH1 },
{ 4 | IFM_IEEE80211_FH, IFM_IEEE80211_FH2 },
{ 2 | IFM_IEEE80211_11B, IFM_IEEE80211_DS1 },
{ 4 | IFM_IEEE80211_11B, IFM_IEEE80211_DS2 },
{ 11 | IFM_IEEE80211_11B, IFM_IEEE80211_DS5 },
{ 22 | IFM_IEEE80211_11B, IFM_IEEE80211_DS11 },
{ 44 | IFM_IEEE80211_11B, IFM_IEEE80211_DS22 },
{ 12 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM6 },
{ 18 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM9 },
{ 24 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM12 },
{ 36 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM18 },
{ 48 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM24 },
{ 72 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM36 },
{ 96 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM48 },
{ 108 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM54 },
{ 2 | IFM_IEEE80211_11G, IFM_IEEE80211_DS1 },
{ 4 | IFM_IEEE80211_11G, IFM_IEEE80211_DS2 },
{ 11 | IFM_IEEE80211_11G, IFM_IEEE80211_DS5 },
{ 22 | IFM_IEEE80211_11G, IFM_IEEE80211_DS11 },
{ 12 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM6 },
{ 18 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM9 },
{ 24 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM12 },
{ 36 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM18 },
{ 48 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM24 },
{ 72 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM36 },
{ 96 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM48 },
{ 108 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM54 },
{ 6 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM3 },
{ 9 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM4 },
{ 54 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM27 },
/* NB: OFDM72 doesn't realy exist so we don't handle it */
};
static const struct ratemedia htrates[] = {
{ 0, IFM_IEEE80211_MCS },
{ 1, IFM_IEEE80211_MCS },
{ 2, IFM_IEEE80211_MCS },
{ 3, IFM_IEEE80211_MCS },
{ 4, IFM_IEEE80211_MCS },
{ 5, IFM_IEEE80211_MCS },
{ 6, IFM_IEEE80211_MCS },
{ 7, IFM_IEEE80211_MCS },
{ 8, IFM_IEEE80211_MCS },
{ 9, IFM_IEEE80211_MCS },
{ 10, IFM_IEEE80211_MCS },
{ 11, IFM_IEEE80211_MCS },
{ 12, IFM_IEEE80211_MCS },
{ 13, IFM_IEEE80211_MCS },
{ 14, IFM_IEEE80211_MCS },
{ 15, IFM_IEEE80211_MCS },
{ 16, IFM_IEEE80211_MCS },
{ 17, IFM_IEEE80211_MCS },
{ 18, IFM_IEEE80211_MCS },
{ 19, IFM_IEEE80211_MCS },
{ 20, IFM_IEEE80211_MCS },
{ 21, IFM_IEEE80211_MCS },
{ 22, IFM_IEEE80211_MCS },
{ 23, IFM_IEEE80211_MCS },
{ 24, IFM_IEEE80211_MCS },
{ 25, IFM_IEEE80211_MCS },
{ 26, IFM_IEEE80211_MCS },
{ 27, IFM_IEEE80211_MCS },
{ 28, IFM_IEEE80211_MCS },
{ 29, IFM_IEEE80211_MCS },
{ 30, IFM_IEEE80211_MCS },
{ 31, IFM_IEEE80211_MCS },
{ 32, IFM_IEEE80211_MCS },
{ 33, IFM_IEEE80211_MCS },
{ 34, IFM_IEEE80211_MCS },
{ 35, IFM_IEEE80211_MCS },
{ 36, IFM_IEEE80211_MCS },
{ 37, IFM_IEEE80211_MCS },
{ 38, IFM_IEEE80211_MCS },
{ 39, IFM_IEEE80211_MCS },
{ 40, IFM_IEEE80211_MCS },
{ 41, IFM_IEEE80211_MCS },
{ 42, IFM_IEEE80211_MCS },
{ 43, IFM_IEEE80211_MCS },
{ 44, IFM_IEEE80211_MCS },
{ 45, IFM_IEEE80211_MCS },
{ 46, IFM_IEEE80211_MCS },
{ 47, IFM_IEEE80211_MCS },
{ 48, IFM_IEEE80211_MCS },
{ 49, IFM_IEEE80211_MCS },
{ 50, IFM_IEEE80211_MCS },
{ 51, IFM_IEEE80211_MCS },
{ 52, IFM_IEEE80211_MCS },
{ 53, IFM_IEEE80211_MCS },
{ 54, IFM_IEEE80211_MCS },
{ 55, IFM_IEEE80211_MCS },
{ 56, IFM_IEEE80211_MCS },
{ 57, IFM_IEEE80211_MCS },
{ 58, IFM_IEEE80211_MCS },
{ 59, IFM_IEEE80211_MCS },
{ 60, IFM_IEEE80211_MCS },
{ 61, IFM_IEEE80211_MCS },
{ 62, IFM_IEEE80211_MCS },
{ 63, IFM_IEEE80211_MCS },
{ 64, IFM_IEEE80211_MCS },
{ 65, IFM_IEEE80211_MCS },
{ 66, IFM_IEEE80211_MCS },
{ 67, IFM_IEEE80211_MCS },
{ 68, IFM_IEEE80211_MCS },
{ 69, IFM_IEEE80211_MCS },
{ 70, IFM_IEEE80211_MCS },
{ 71, IFM_IEEE80211_MCS },
{ 72, IFM_IEEE80211_MCS },
{ 73, IFM_IEEE80211_MCS },
{ 74, IFM_IEEE80211_MCS },
{ 75, IFM_IEEE80211_MCS },
{ 76, IFM_IEEE80211_MCS },
};
int m;
/*
* Check 11n rates first for match as an MCS.
*/
if (mode == IEEE80211_MODE_11NA) {
if (rate & IEEE80211_RATE_MCS) {
rate &= ~IEEE80211_RATE_MCS;
m = findmedia(htrates, N(htrates), rate);
if (m != IFM_AUTO)
return m | IFM_IEEE80211_11NA;
}
} else if (mode == IEEE80211_MODE_11NG) {
/* NB: 12 is ambiguous, it will be treated as an MCS */
if (rate & IEEE80211_RATE_MCS) {
rate &= ~IEEE80211_RATE_MCS;
m = findmedia(htrates, N(htrates), rate);
if (m != IFM_AUTO)
return m | IFM_IEEE80211_11NG;
}
}
rate &= IEEE80211_RATE_VAL;
switch (mode) {
case IEEE80211_MODE_11A:
case IEEE80211_MODE_HALF: /* XXX good 'nuf */
case IEEE80211_MODE_QUARTER:
case IEEE80211_MODE_11NA:
case IEEE80211_MODE_TURBO_A:
case IEEE80211_MODE_STURBO_A:
return findmedia(rates, N(rates), rate | IFM_IEEE80211_11A);
case IEEE80211_MODE_11B:
return findmedia(rates, N(rates), rate | IFM_IEEE80211_11B);
case IEEE80211_MODE_FH:
return findmedia(rates, N(rates), rate | IFM_IEEE80211_FH);
case IEEE80211_MODE_AUTO:
/* NB: ic may be NULL for some drivers */
if (ic != NULL && ic->ic_phytype == IEEE80211_T_FH)
return findmedia(rates, N(rates),
rate | IFM_IEEE80211_FH);
/* NB: hack, 11g matches both 11b+11a rates */
/* fall thru... */
case IEEE80211_MODE_11G:
case IEEE80211_MODE_11NG:
case IEEE80211_MODE_TURBO_G:
return findmedia(rates, N(rates), rate | IFM_IEEE80211_11G);
}
return IFM_AUTO;
#undef N
}
int
ieee80211_media2rate(int mword)
{
#define N(a) (sizeof(a) / sizeof(a[0]))
static const int ieeerates[] = {
-1, /* IFM_AUTO */
0, /* IFM_MANUAL */
0, /* IFM_NONE */
2, /* IFM_IEEE80211_FH1 */
4, /* IFM_IEEE80211_FH2 */
2, /* IFM_IEEE80211_DS1 */
4, /* IFM_IEEE80211_DS2 */
11, /* IFM_IEEE80211_DS5 */
22, /* IFM_IEEE80211_DS11 */
44, /* IFM_IEEE80211_DS22 */
12, /* IFM_IEEE80211_OFDM6 */
18, /* IFM_IEEE80211_OFDM9 */
24, /* IFM_IEEE80211_OFDM12 */
36, /* IFM_IEEE80211_OFDM18 */
48, /* IFM_IEEE80211_OFDM24 */
72, /* IFM_IEEE80211_OFDM36 */
96, /* IFM_IEEE80211_OFDM48 */
108, /* IFM_IEEE80211_OFDM54 */
144, /* IFM_IEEE80211_OFDM72 */
0, /* IFM_IEEE80211_DS354k */
0, /* IFM_IEEE80211_DS512k */
6, /* IFM_IEEE80211_OFDM3 */
9, /* IFM_IEEE80211_OFDM4 */
54, /* IFM_IEEE80211_OFDM27 */
-1, /* IFM_IEEE80211_MCS */
};
return IFM_SUBTYPE(mword) < N(ieeerates) ?
ieeerates[IFM_SUBTYPE(mword)] : 0;
#undef N
}
/*
* The following hash function is adapted from "Hash Functions" by Bob Jenkins
* ("Algorithm Alley", Dr. Dobbs Journal, September 1997).
*/
#define mix(a, b, c) \
do { \
a -= b; a -= c; a ^= (c >> 13); \
b -= c; b -= a; b ^= (a << 8); \
c -= a; c -= b; c ^= (b >> 13); \
a -= b; a -= c; a ^= (c >> 12); \
b -= c; b -= a; b ^= (a << 16); \
c -= a; c -= b; c ^= (b >> 5); \
a -= b; a -= c; a ^= (c >> 3); \
b -= c; b -= a; b ^= (a << 10); \
c -= a; c -= b; c ^= (b >> 15); \
} while (/*CONSTCOND*/0)
uint32_t
ieee80211_mac_hash(const struct ieee80211com *ic,
const uint8_t addr[IEEE80211_ADDR_LEN])
{
uint32_t a = 0x9e3779b9, b = 0x9e3779b9, c = ic->ic_hash_key;
b += addr[5] << 8;
b += addr[4];
a += addr[3] << 24;
a += addr[2] << 16;
a += addr[1] << 8;
a += addr[0];
mix(a, b, c);
return c;
}
#undef mix
Reference in New Issue View Git Blame Copy Permalink