5d42d35e02
Add signal strength cache and antenna selection (untested as firmware v4 doesn't return the antenna). KNF
3839 lines
106 KiB
C
3839 lines
106 KiB
C
/*
|
|
* Copyright (C) 2000
|
|
* Dr. Duncan McLennan Barclay, dmlb@ragnet.demon.co.uk.
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY DUNCAN BARCLAY AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL DUNCAN BARCLAY OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $Id: if_ray.c,v 1.15 2000/03/21 14:39:36 dmlb Exp $
|
|
*
|
|
*/
|
|
|
|
/* $NetBSD: if_ray.c,v 1.12 2000/02/07 09:36:27 augustss Exp $ */
|
|
/*
|
|
* Copyright (c) 2000 Christian E. Hopps
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
*
|
|
* Card configuration
|
|
* ==================
|
|
*
|
|
* This card is unusual in that it uses both common and attribute
|
|
* memory whilst working. The -stable versions of FreeBSD have a real
|
|
* problem managing and setting up the correct memory maps. This
|
|
* driver should reset the memory maps correctly under PAO and non-PAO
|
|
* -stable systems. Work is in hand to fix these problems for -current.
|
|
*
|
|
* So, if you want to use this driver make sure that
|
|
* options RAY_NEED_CM_FIXUP
|
|
* options RAY_NEED_CM_REMAPPING
|
|
* are in your kernel configuration file.
|
|
*
|
|
* The first fixes the brain deadness of pccardd (where it reads the
|
|
* CIS for common memory, sets it all up and then throws it all away
|
|
* assuming the card is an ed driver...). Note that this could be
|
|
* dangerous (because it doesn't interact with pccardd) if you
|
|
* use other memory mapped cards at the same time.
|
|
*
|
|
* The second option ensures that common memory is remapped whenever
|
|
* we are going to access it (we can't just do it once, as something
|
|
* like pccardd may have read the attribute memory and pccard.c
|
|
* doesn't re-map the last active window - it remaps the last
|
|
* non-active window...).
|
|
*
|
|
*
|
|
* Ad-hoc and infra-structure modes
|
|
* ================================
|
|
*
|
|
* At present only the ad-hoc mode is being worked on.
|
|
*
|
|
* Apart from just writing the code for infrastructure mode I have a
|
|
* few concerns about both the Linux and NetBSD drivers in this area.
|
|
* They don't seem to differentiate between the MAC address of the AP
|
|
* and the BSS_ID of the network. I presume this is handled when
|
|
* joining a managed n/w and the network parameters are updated, but
|
|
* I'm not sure. How does this interact with ARP? For mobility we want
|
|
* to be able to move around without worrying about which AP we are
|
|
* actually talking to - we should always talk to the BSS_ID.
|
|
*
|
|
* The Linux driver also seems to have the capability to act as an AP.
|
|
* I wonder what facilities the "AP" can provide within a driver? We can
|
|
* probably use the BRIDGE code to form an ESS but I don't think
|
|
* power saving etc. is easy.
|
|
*
|
|
*
|
|
* Packet translation/encapsulation
|
|
* ================================
|
|
*
|
|
* Currently we only support the Webgear encapsulation
|
|
* 802.11 header <net/if_ieee80211.h>struct ieee80211_header
|
|
* 802.3 header <net/ethernet.h>struct ether_header
|
|
* 802.2 LLC header
|
|
* 802.2 SNAP header
|
|
*
|
|
* We should support whatever packet types the following drivers have
|
|
* if_wi.c FreeBSD, RFC1042
|
|
* if_ray.c NetBSD Webgear, RFC1042
|
|
* rayctl.c Linux Webgear, RFC1042
|
|
* also whatever we can divine from the NDC Access points and Kanda's boxes.
|
|
*
|
|
* Most drivers appear to have a RFC1042 translation. The incoming packet is
|
|
* 802.11 header <net/if_ieee80211.h>struct ieee80211_header
|
|
* 802.2 LLC header
|
|
* 802.2 SNAP header
|
|
*
|
|
* This is translated to
|
|
* 802.3 header <net/ethernet.h>struct ether_header
|
|
* 802.2 LLC header
|
|
* 802.2 SNAP header
|
|
*
|
|
* Linux seems to look at the SNAP org_code and do some translations
|
|
* for IPX and APPLEARP on that. This just may be how Linux does IPX
|
|
* and NETATALK. Need to see how FreeBSD does these.
|
|
*
|
|
* Translation should be selected via if_media stuff or link types.
|
|
*/
|
|
|
|
/*
|
|
* TODO
|
|
*
|
|
* _stop - mostly done
|
|
* would be nice to understand shutdown/or power save to prevent RX
|
|
* _reset - done
|
|
* just needs calling in the right places
|
|
* converted panics to resets - when tx packets are the wrong length
|
|
* may be needed in a couple of other places when I do more commands
|
|
* havenet - mostly done
|
|
* i think i've got all the places to set it right, but not so sure
|
|
* we reset it in all the right places
|
|
* _unload - done
|
|
* recreated most of stop but as card is unplugged don't try and
|
|
* access it to turn it off
|
|
* TX bpf - done
|
|
* RX bpf - done
|
|
* I would much prefer to have the complete 802.11 packet dropped to
|
|
* the bpf tap and then have a user land program parse the headers
|
|
* as needed. This way, tcpdump -w can be used to grab the raw data. If
|
|
* needed the 802.11 aware program can "translate" the .11 to ethernet
|
|
* for tcpdump -r
|
|
* use std timeout code for download - done
|
|
* was mainly moving a call and removing a load of stuff in
|
|
* download_done as it duplicates check_ccs and ccs_done
|
|
* promisoius - done
|
|
* add the start_join_net - done
|
|
* i needed it anyway
|
|
* remove startccs and startcmd - done
|
|
* as those were used for the NetBSD start timeout
|
|
* multicast - done but UNTESTED
|
|
* I don't have the ability/facilty to test this
|
|
* rxlevel - done
|
|
* stats reported via raycontrol
|
|
* getparams ioctl - done
|
|
* reported via raycontrol
|
|
* start_join_done needs a restart in download_done - done
|
|
* now use netbsd style start up
|
|
* ioctls - done
|
|
* use raycontrol
|
|
* translation, BSS_ID, countrycode, changing mode
|
|
* ifp->if_hdr length - done
|
|
* rx level and antenna cache - done
|
|
* antenna not used yet
|
|
* antenna tx side - done
|
|
* not tested!
|
|
*
|
|
* shutdown
|
|
* _reset - check where needed
|
|
* apm
|
|
* resume
|
|
* faster TX routine
|
|
* more translations
|
|
* infrastructure mode - maybe need some of the old stuff for checking?
|
|
* differeniate between parameters set in attach and init
|
|
* spinning in ray_issue_cmd
|
|
* fix the XXX code in start_join_done
|
|
* make RAY_DEBUG a knob somehow - either sysctl or IFF_DEBUG
|
|
* ray_update_params_done needs work
|
|
* callout handles need rationalising. can probably remove timerh and
|
|
* use ccs_timerh for download and sj_timerh
|
|
*/
|
|
|
|
#define XXX 0
|
|
#define XXX_NETBSDTX 0
|
|
#define XXX_PROM 0
|
|
|
|
/*
|
|
* XXX build options - move to LINT
|
|
*/
|
|
|
|
/*
|
|
* RAY_DEBUG settings
|
|
*
|
|
* 2 Recoverable error's
|
|
* 6 Subroutine entry
|
|
* 11 Startup CM dump
|
|
* 16 State transitions for start/join
|
|
* 21 CCS info
|
|
* 31 IOCTL calls
|
|
* 51 MBUFs dumped/packet types reported
|
|
*/
|
|
#ifndef RAY_DEBUG
|
|
#define RAY_DEBUG 2
|
|
#endif
|
|
|
|
#define RAY_CCS_TIMEOUT (hz/2) /* Timeout for CCS commands */
|
|
#define RAY_CHECK_SCHED_TIMEOUT (hz) /* Time to wait until command retry, should be > RAY_CCS_TIMEOUT */
|
|
|
|
#define RAY_NEED_STARTJOIN_TIMO 0 /* Might be needed with build 4 */
|
|
#define RAY_SJ_TIMEOUT (90*hz) /* Timeout for failing STARTJOIN commands - only used with RAY_NEED_STARTJOIN_TIMO */
|
|
|
|
#define RAY_NEED_CM_FIXUP 1 /* Needed until pccardd hacks for ed drivers are removed (pccardd forces 16bit memory and 0x4000 size) THIS IS A DANGEROUS THING TO USE IF YOU USE OTHER MEMORY MAPPED PCCARDS */
|
|
|
|
#define RAY_NEED_CM_REMAPPING 1 /* Needed until pccard maps more than one memory area */
|
|
|
|
#define RAY_RESET_TIMEOUT (5*hz) /* Timeout for resetting the card */
|
|
|
|
#define RAY_USE_CALLOUT_STOP 0 /* Set for kernels with callout_stop function - 3.3 and above */
|
|
|
|
#define RAY_SIMPLE_TX 1 /* Simple TX routine */
|
|
#define RAY_DECENT_TX 0 /* Decent TX routine - tbd */
|
|
/*
|
|
* XXX build options - move to LINT
|
|
*/
|
|
|
|
/*
|
|
* Debugging odds and odds
|
|
*/
|
|
#ifndef RAY_DEBUG
|
|
#define RAY_DEBUG 0
|
|
#endif /* RAY_DEBUG */
|
|
|
|
#if RAY_DEBUG > 0
|
|
|
|
/* XXX This macro assumes that common memory is mapped into kernel space and
|
|
* XXX does not indirect through SRAM macros - it should
|
|
*/
|
|
#define RAY_DHEX8(p, l, lev) do { if (RAY_DEBUG > lev) { \
|
|
u_int8_t *i; \
|
|
for (i = p; i < (u_int8_t *)(p+l); i += 8) \
|
|
printf(" 0x%08lx %8D\n", \
|
|
(unsigned long)i, (unsigned char *)i, " "); \
|
|
} } while (0)
|
|
|
|
#define RAY_DPRINTFN(l, x) do { if (RAY_DEBUG > l) { \
|
|
printf x ; \
|
|
} } while (0)
|
|
|
|
#define RAY_DNET_DUMP(sc, s) do { if (RAY_DEBUG > 15) { \
|
|
printf("ray%d: Current network parameters%s\n", (sc)->unit, (s)); \
|
|
printf(" bss_id %6D\n", (sc)->sc_c.np_bss_id, ":"); \
|
|
printf(" inited 0x%02x\n", (sc)->sc_c.np_inited); \
|
|
printf(" def_txrate 0x%02x\n", (sc)->sc_c.np_def_txrate); \
|
|
printf(" encrypt 0x%02x\n", (sc)->sc_c.np_encrypt); \
|
|
printf(" net_type 0x%02x\n", (sc)->sc_c.np_net_type); \
|
|
printf(" ssid \"%.32s\"\n", (sc)->sc_c.np_ssid); \
|
|
printf(" %8D\n", (sc)->sc_c.np_ssid, " "); \
|
|
printf(" %8D\n", (sc)->sc_c.np_ssid+8, " "); \
|
|
printf(" %8D\n", (sc)->sc_c.np_ssid+16, " "); \
|
|
printf(" %8D\n", (sc)->sc_c.np_ssid+24, " "); \
|
|
printf(" priv_start 0x%02x\n", (sc)->sc_c.np_priv_start); \
|
|
printf(" priv_join 0x%02x\n", (sc)->sc_c.np_priv_join); \
|
|
printf("ray%d: Desired network parameters%s\n", (sc)->unit, (s)); \
|
|
printf(" bss_id %6D\n", (sc)->sc_d.np_bss_id, ":"); \
|
|
printf(" inited 0x%02x\n", (sc)->sc_d.np_inited); \
|
|
printf(" def_txrate 0x%02x\n", (sc)->sc_d.np_def_txrate); \
|
|
printf(" encrypt 0x%02x\n", (sc)->sc_d.np_encrypt); \
|
|
printf(" net_type 0x%02x\n", (sc)->sc_d.np_net_type); \
|
|
printf(" ssid \"%.32s\"\n", (sc)->sc_d.np_ssid); \
|
|
printf(" %8D\n", (sc)->sc_c.np_ssid, " "); \
|
|
printf(" %8D\n", (sc)->sc_c.np_ssid+8, " "); \
|
|
printf(" %8D\n", (sc)->sc_c.np_ssid+16, " "); \
|
|
printf(" %8D\n", (sc)->sc_c.np_ssid+24, " "); \
|
|
printf(" priv_start 0x%02x\n", (sc)->sc_d.np_priv_start); \
|
|
printf(" priv_join 0x%02x\n", (sc)->sc_d.np_priv_join); \
|
|
} } while (0)
|
|
|
|
#else
|
|
#define RAY_DHEX8(p, l, lev)
|
|
#define RAY_DPRINTFN(l,x)
|
|
#define RAY_DNET_DUMP(sc, s)
|
|
#endif /* RAY_DEBUG > 0 */
|
|
|
|
#if RAY_DEBUG > 50
|
|
#define RAY_DMBUF_DUMP(sc, m, s) ray_dump_mbuf((sc), (m), (s))
|
|
#else
|
|
#define RAY_DMBUF_DUMP(sc, m, s)
|
|
#endif /* RAY_DEBUG > 10 */
|
|
|
|
#include "ray.h"
|
|
#include "card.h"
|
|
#include "apm.h"
|
|
#include "bpfilter.h"
|
|
|
|
#if NRAY > 0
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/cdefs.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/callout.h>
|
|
#include <sys/select.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/uio.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/ucred.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/ethernet.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
#include <net/if_mib.h>
|
|
|
|
#if NBPFILTER > 0
|
|
#include <net/bpf.h>
|
|
#endif /* NBPFILTER */
|
|
|
|
#include <machine/clock.h>
|
|
#include <machine/md_var.h>
|
|
#include <machine/bus_pio.h>
|
|
#include <machine/bus.h>
|
|
#include <machine/limits.h>
|
|
|
|
#include <i386/isa/isa.h>
|
|
#include <i386/isa/isa_device.h>
|
|
|
|
#include <i386/isa/if_ieee80211.h>
|
|
#include <i386/isa/if_rayreg.h>
|
|
#include <i386/isa/if_raymib.h>
|
|
|
|
#if NCARD > 0
|
|
#include <pccard/cardinfo.h>
|
|
#include <pccard/cis.h>
|
|
#include <pccard/driver.h>
|
|
#include <pccard/slot.h>
|
|
#endif /* NCARD */
|
|
|
|
#if NAPM > 0
|
|
#include <machine/apm_bios.h>
|
|
#endif /* NAPM */
|
|
|
|
/*
|
|
* Sysctl knobs
|
|
*/
|
|
static int ray_debug = RAY_DEBUG;
|
|
|
|
SYSCTL_NODE(_hw, OID_AUTO, ray, CTLFLAG_RW, 0, "Raylink Driver");
|
|
SYSCTL_INT(_hw_ray, OID_AUTO, debug, CTLFLAG_RW, &ray_debug, RAY_DEBUG, "");
|
|
|
|
/*
|
|
* Network parameters, used twice in sotfc to store what we want and what
|
|
* we have.
|
|
*
|
|
* XXX promisc in here too?
|
|
* XXX sc_station_addr in here too (for changing mac address)
|
|
*/
|
|
struct ray_nw_param {
|
|
struct ray_cmd_net p_1;
|
|
u_int8_t np_ap_status;
|
|
struct ray_net_params \
|
|
p_2;
|
|
u_int8_t np_countrycode;
|
|
};
|
|
#define np_upd_param p_1.c_upd_param
|
|
#define np_bss_id p_1.c_bss_id
|
|
#define np_inited p_1.c_inited
|
|
#define np_def_txrate p_1.c_def_txrate
|
|
#define np_encrypt p_1.c_encrypt
|
|
#define np_net_type p_2.p_net_type
|
|
#define np_ssid p_2.p_ssid
|
|
#define np_priv_start p_2.p_privacy_must_start
|
|
#define np_priv_join p_2.p_privacy_can_join
|
|
|
|
/*
|
|
* One of these structures per allocated device
|
|
*/
|
|
struct ray_softc {
|
|
|
|
struct arpcom arpcom; /* Ethernet common */
|
|
struct ifmedia ifmedia; /* Ifnet common */
|
|
struct callout_handle \
|
|
ccs_timerh; /* Handle for ccs timeouts */
|
|
struct callout_handle \
|
|
reset_timerh; /* Handle for reset timer */
|
|
struct callout_handle \
|
|
start_timerh; /* Handle for start timer */
|
|
#if RAY_NEED_STARTJOIN_TIMO
|
|
struct callout_handle \
|
|
sj_timerh; /* Handle for start_join timer */
|
|
#endif /* RAY_NEED_STARTJOIN_TIMO */
|
|
char *card_type; /* Card model name */
|
|
char *vendor; /* Card manufacturer */
|
|
|
|
int unit; /* Unit number */
|
|
u_char gone; /* 1 = Card bailed out */
|
|
caddr_t maddr; /* Shared RAM Address */
|
|
int flags; /* Start up flags */
|
|
|
|
int translation; /* Packet translation types */
|
|
|
|
#if (RAY_NEED_CM_REMAPPING | RAY_NEED_CM_FIXUP)
|
|
int slotnum; /* Slot number */
|
|
struct mem_desc md; /* Map info for common memory */
|
|
#endif /* (RAY_NEED_CM_REMAPPING | RAY_NEED_CM_FIXUP) */
|
|
|
|
struct ray_ecf_startup_v5 \
|
|
sc_ecf_startup; /* Startup info from card */
|
|
|
|
struct ray_nw_param sc_c; /* current network params */
|
|
struct ray_nw_param sc_d; /* desired network params */
|
|
int sc_havenet; /* true if we have a network */
|
|
int sc_promisc; /* current set value */
|
|
int sc_running; /* things we are doing */
|
|
int sc_scheduled; /* things we need to do */
|
|
int sc_timoneed; /* set if timeout is sched */
|
|
int sc_timocheck; /* set if timeout is sched */
|
|
u_int8_t sc_ccsinuse[64];/* ccss' in use -- not for tx */
|
|
|
|
int sc_checkcounters;
|
|
u_int64_t sc_rxoverflow; /* Number of rx overflows */
|
|
u_int64_t sc_rxcksum; /* Number of checksum errors */
|
|
u_int64_t sc_rxhcksum; /* Number of header checksum errors */
|
|
u_int8_t sc_rxnoise; /* Average receiver level */
|
|
struct ray_siglev sc_siglevs[RAY_NSIGLEVRECS]; /* Antenna/levels */
|
|
|
|
struct ray_param_req \
|
|
*sc_repreq; /* used to return values */
|
|
struct ray_param_req \
|
|
*sc_updreq; /* to the user */
|
|
};
|
|
static struct ray_softc ray_softc[NRAY];
|
|
|
|
#define sc_station_addr sc_ecf_startup.e_station_addr
|
|
#define sc_version sc_ecf_startup.e_fw_build_string
|
|
#define sc_tibsize sc_ecf_startup.e_tibsize
|
|
|
|
/* Commands -- priority given to LSB */
|
|
#define SCP_FIRST 0x0001
|
|
#define SCP_UPDATESUBCMD 0x0001
|
|
#define SCP_STARTASSOC 0x0002
|
|
#define SCP_REPORTPARAMS 0x0004
|
|
#define SCP_IFSTART 0x0008
|
|
|
|
/* Update sub commands -- issues are serialized priority to LSB */
|
|
#define SCP_UPD_FIRST 0x0100
|
|
#define SCP_UPD_STARTUP 0x0100
|
|
#define SCP_UPD_STARTJOIN 0x0200
|
|
#define SCP_UPD_PROMISC 0x0400
|
|
#define SCP_UPD_MCAST 0x0800
|
|
#define SCP_UPD_UPDATEPARAMS 0x1000
|
|
#define SCP_UPD_SHIFT 8
|
|
#define SCP_UPD_MASK 0xff00
|
|
|
|
/* These command (a subset of the update set) require timeout checking */
|
|
#define SCP_TIMOCHECK_CMD_MASK \
|
|
(SCP_UPD_UPDATEPARAMS | SCP_UPD_STARTUP | SCP_UPD_MCAST | \
|
|
SCP_UPD_PROMISC)
|
|
|
|
/*
|
|
* Translation types
|
|
*/
|
|
/* XXX maybe better as part of the if structure? */
|
|
#define SC_TRANSLATE_WEBGEAR 0
|
|
|
|
/*
|
|
* Prototyping
|
|
*/
|
|
static int ray_attach __P((struct isa_device *dev));
|
|
static int ray_alloc_ccs __P((struct ray_softc *sc, size_t *ccsp, u_int cmd, u_int track));
|
|
static void ray_ccs_done __P((struct ray_softc *sc, size_t ccs));
|
|
static void ray_check_ccs __P((void *arg));
|
|
static void ray_check_scheduled __P((void *arg));
|
|
static void ray_cmd_cancel __P((struct ray_softc *sc, int cmdf));
|
|
static void ray_cmd_done __P((struct ray_softc *sc, int cmdf));
|
|
static int ray_cmd_is_running __P((struct ray_softc *sc, int cmdf));
|
|
static int ray_cmd_is_scheduled __P((struct ray_softc *sc, int cmdf));
|
|
static void ray_cmd_ran __P((struct ray_softc *sc, int cmdf));
|
|
static void ray_cmd_schedule __P((struct ray_softc *sc, int cmdf));
|
|
static void ray_download_done __P((struct ray_softc *sc));
|
|
static void ray_download_params __P((struct ray_softc *sc));
|
|
#if RAY_DEBUG > 50
|
|
static void ray_dump_mbuf __P((struct ray_softc *sc, struct mbuf *m, char *s));
|
|
#endif /* RAY_DEBUG > 50 */
|
|
static u_int8_t ray_free_ccs __P((struct ray_softc *sc, size_t ccs));
|
|
#if XXX_NETBSDTX
|
|
static void ray_free_ccs_chain __P((struct ray_softc *sc, u_int ni));
|
|
#endif /* XXX_NETBSDTX */
|
|
static int ray_intr __P((struct pccard_devinfo *dev_p));
|
|
static int ray_ioctl __P((struct ifnet *ifp, u_long command, caddr_t data));
|
|
static void ray_init __P((void *xsc));
|
|
static int ray_issue_cmd __P((struct ray_softc *sc, size_t ccs, u_int track));
|
|
static int ray_pccard_init __P((struct pccard_devinfo *dev_p));
|
|
static int ray_pccard_intr __P((struct pccard_devinfo *dev_p));
|
|
static void ray_pccard_unload __P((struct pccard_devinfo *dev_p));
|
|
static int ray_probe __P((struct isa_device *dev));
|
|
static void ray_rcs_intr __P((struct ray_softc *sc, size_t ccs));
|
|
|
|
static void ray_report_params __P((struct ray_softc *sc));
|
|
static void ray_reset __P((struct ray_softc *sc));
|
|
static void ray_reset_timo __P((void *xsc));
|
|
static void ray_rx __P((struct ray_softc *sc, size_t rcs));
|
|
static void ray_rx_update_cache __P((struct ray_softc *sc, u_int8_t *src, u_int8_t siglev, u_int8_t antenna));
|
|
static void ray_set_pending __P((struct ray_softc *sc, u_int cmdf));
|
|
static int ray_simple_cmd __P((struct ray_softc *sc, u_int cmd, u_int track));
|
|
static void ray_start __P((struct ifnet *ifp));
|
|
static void ray_start_assoc __P((struct ray_softc *sc));
|
|
static u_int8_t ray_start_best_antenna __P((struct ray_softc *sc, u_int8_t *dst));
|
|
static void ray_start_done __P((struct ray_softc *sc, size_t ccs, u_int8_t status));
|
|
static void ray_start_sc __P((struct ray_softc *sc));
|
|
static void ray_start_timo __P((void *xsc));
|
|
static size_t ray_start_wrhdr __P((struct ray_softc *sc, struct ether_header *eh, size_t bufp));
|
|
static void ray_start_join_done __P((struct ray_softc *sc, size_t ccs, u_int8_t status));
|
|
static void ray_start_join_net __P((struct ray_softc *sc));
|
|
#if RAY_NEED_STARTJOIN_TIMO
|
|
static void ray_start_join_timo __P((void *xsc));
|
|
#endif /* RAY_NEED_STARTJOIN_TIMO */
|
|
static void ray_stop __P((struct ray_softc *sc));
|
|
static void ray_update_error_counters \
|
|
__P((struct ray_softc *sc));
|
|
static void ray_update_mcast __P((struct ray_softc *sc));
|
|
static void ray_update_params __P((struct ray_softc *sc));
|
|
static void ray_update_params_done __P((struct ray_softc *sc, size_t ccs, u_int stat));
|
|
static void ray_update_promisc __P((struct ray_softc *sc));
|
|
static void ray_update_subcmd __P((struct ray_softc *sc));
|
|
static int ray_user_update_params __P((struct ray_softc *sc, struct ray_param_req *pr));
|
|
static int ray_user_report_params __P((struct ray_softc *sc, struct ray_param_req *pr));
|
|
static int ray_user_report_stats __P((struct ray_softc *sc, struct ray_stats_req *sr));
|
|
static void ray_watchdog __P((struct ifnet *ifp));
|
|
|
|
/*
|
|
* PCMCIA driver definition
|
|
*/
|
|
PCCARD_MODULE(ray, ray_pccard_init, ray_pccard_unload, ray_pccard_intr, 0, net_imask);
|
|
|
|
/*
|
|
* ISA driver definition
|
|
*/
|
|
struct isa_driver raydriver = {
|
|
ray_probe,
|
|
ray_attach,
|
|
"ray",
|
|
1
|
|
};
|
|
|
|
/*
|
|
* Command function tables - based on bit index in SCP_xx
|
|
*/
|
|
typedef void (*ray_cmd_func_t)(struct ray_softc *);
|
|
static ray_cmd_func_t ray_cmdtab[] = {
|
|
ray_update_subcmd, /* SCP_UPDATESUBCMD */
|
|
ray_start_assoc, /* SCP_STARTASSOC */
|
|
ray_report_params, /* SCP_REPORTPARAMS */
|
|
ray_start_sc /* SCP_IFSTART */
|
|
};
|
|
static int ray_ncmdtab = sizeof(ray_cmdtab) / sizeof(*ray_cmdtab);
|
|
|
|
static ray_cmd_func_t ray_subcmdtab[] = {
|
|
ray_download_params, /* SCP_UPD_STARTUP */
|
|
ray_start_join_net, /* SCP_UPD_STARTJOIN */
|
|
ray_update_promisc, /* SCP_UPD_PROMISC */
|
|
ray_update_mcast, /* SCP_UPD_MCAST */
|
|
ray_update_params /* SCP_UPD_UPDATEPARAMS */
|
|
};
|
|
static int ray_nsubcmdtab = sizeof(ray_subcmdtab) / sizeof(*ray_subcmdtab);
|
|
|
|
/*
|
|
* Indirections for reading/writing shared memory - from NetBSD/if_ray.c
|
|
*/
|
|
#ifndef offsetof
|
|
#define offsetof(type, member) \
|
|
((size_t)(&((type *)0)->member))
|
|
#endif /* offsetof */
|
|
|
|
#define SRAM_READ_1(sc, off) \
|
|
(u_int8_t)*((sc)->maddr + (off))
|
|
/* ((u_int8_t)bus_space_read_1((sc)->sc_memt, (sc)->sc_memh, (off))) */
|
|
|
|
#define SRAM_READ_FIELD_1(sc, off, s, f) \
|
|
SRAM_READ_1(sc, (off) + offsetof(struct s, f))
|
|
|
|
#define SRAM_READ_FIELD_2(sc, off, s, f) \
|
|
((((u_int16_t)SRAM_READ_1(sc, (off) + offsetof(struct s, f)) << 8) \
|
|
|(SRAM_READ_1(sc, (off) + 1 + offsetof(struct s, f)))))
|
|
|
|
#define SRAM_READ_FIELD_N(sc, off, s, f, p, n) \
|
|
ray_read_region(sc, (off) + offsetof(struct s, f), (p), (n))
|
|
|
|
#define ray_read_region(sc, off, vp, n) \
|
|
bcopy((sc)->maddr + (off), (vp), (n))
|
|
|
|
#define SRAM_WRITE_1(sc, off, val) \
|
|
*((sc)->maddr + (off)) = (val)
|
|
/* bus_space_write_1((sc)->sc_memt, (sc)->sc_memh, (off), (val)) */
|
|
|
|
#define SRAM_WRITE_FIELD_1(sc, off, s, f, v) \
|
|
SRAM_WRITE_1(sc, (off) + offsetof(struct s, f), (v))
|
|
|
|
#define SRAM_WRITE_FIELD_2(sc, off, s, f, v) do { \
|
|
SRAM_WRITE_1(sc, (off) + offsetof(struct s, f), (((v) >> 8 ) & 0xff)); \
|
|
SRAM_WRITE_1(sc, (off) + 1 + offsetof(struct s, f), ((v) & 0xff)); \
|
|
} while (0)
|
|
|
|
#define SRAM_WRITE_FIELD_N(sc, off, s, f, p, n) \
|
|
ray_write_region(sc, (off) + offsetof(struct s, f), (p), (n))
|
|
|
|
#define ray_write_region(sc, off, vp, n) \
|
|
bcopy((vp), (sc)->maddr + (off), (n))
|
|
|
|
/*
|
|
* Macro's and constants
|
|
*/
|
|
#ifndef RAY_CCS_TIMEOUT
|
|
#define RAY_CCS_TIMEOUT (hz / 2)
|
|
#endif
|
|
#ifndef RAY_CHECK_SCHED_TIMEOUT
|
|
#define RAY_CHECK_SCHED_TIMEOUT (hz)
|
|
#endif
|
|
#ifndef RAY_RESET_TIMEOUT
|
|
#define RAY_RESET_TIMEOUT (10 * hz)
|
|
#endif
|
|
#ifndef RAY_START_TIMEOUT
|
|
#define RAY_START_TIMEOUT (hz / 2)
|
|
#endif
|
|
#define RAY_CCS_FREE(sc, ccs) \
|
|
SRAM_WRITE_FIELD_1((sc), (ccs), ray_cmd, c_status, RAY_CCS_STATUS_FREE)
|
|
#define RAY_ECF_READY(sc) (!(ray_read_reg(sc, RAY_ECFIR) & RAY_ECFIR_IRQ))
|
|
#define RAY_ECF_START_CMD(sc) ray_attr_write((sc), RAY_ECFIR, RAY_ECFIR_IRQ)
|
|
#define RAY_HCS_CLEAR_INTR(sc) ray_attr_write((sc), RAY_HCSIR, 0)
|
|
#define RAY_HCS_INTR(sc) (ray_read_reg(sc, RAY_HCSIR) & RAY_HCSIR_IRQ)
|
|
|
|
/*
|
|
* As described in if_xe.c...
|
|
*
|
|
* Horrid stuff for accessing CIS tuples and remapping common memory...
|
|
*/
|
|
#define CARD_MAJOR 50
|
|
static int ray_attr_write __P((struct ray_softc *sc, off_t offset, u_int8_t byte));
|
|
static int ray_attr_read __P((struct ray_softc *sc, off_t offset, u_int8_t *buf, int size));
|
|
static u_int8_t ray_read_reg __P((struct ray_softc *sc, off_t reg));
|
|
|
|
#if (RAY_NEED_CM_REMAPPING | RAY_NEED_CM_FIXUP)
|
|
static void ray_attr_getmap __P((struct ray_softc *sc));
|
|
static void ray_attr_cm __P((struct ray_softc *sc));
|
|
#define RAY_MAP_CM(sc) ray_attr_cm(sc)
|
|
#else
|
|
#define RAY_MAP_CM(sc)
|
|
#endif /* (RAY_NEED_CM_REMAPPING | RAY_NEED_CM_FIXUP) */
|
|
|
|
/*
|
|
* PCCard initialise.
|
|
*/
|
|
static int
|
|
ray_pccard_init(dev_p)
|
|
struct pccard_devinfo *dev_p;
|
|
{
|
|
struct ray_softc *sc;
|
|
int doRemap;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: PCCard probe\n", dev_p->isahd.id_unit));
|
|
|
|
if (dev_p->isahd.id_unit >= NRAY)
|
|
return (ENODEV);
|
|
|
|
sc = &ray_softc[dev_p->isahd.id_unit];
|
|
|
|
#if (RAY_NEED_CM_REMAPPING | RAY_NEED_CM_FIXUP)
|
|
sc->slotnum = dev_p->slt->slotnum;
|
|
ray_attr_getmap(sc);
|
|
RAY_DPRINTFN(1, ("ray%d: Memory window flags 0x%02x, start %p, size 0x%x, card address 0x%lx\n", sc->unit, sc->md.flags, sc->md.start, sc->md.size, sc->md.card));
|
|
#endif /* (RAY_NEED_CM_REMAPPING | RAY_NEED_CM_FIXUP) */
|
|
|
|
#if RAY_NEED_CM_FIXUP
|
|
doRemap = 0;
|
|
if (sc->md.start == 0x0) {
|
|
printf("ray%d: pccardd did not map CM - giving up\n", sc->unit);
|
|
return (ENXIO);
|
|
}
|
|
if (sc->md.flags != MDF_ACTIVE) {
|
|
printf("ray%d: Fixing up CM flags from 0x%x to 0x40\n",
|
|
sc->unit, sc->md.flags);
|
|
doRemap = 1;
|
|
sc->md.flags = MDF_ACTIVE;
|
|
}
|
|
if (sc->md.size != 0xc000) {
|
|
printf("ray%d: Fixing up CM size from 0x%x to 0xc000\n",
|
|
sc->unit, sc->md.size);
|
|
doRemap = 1;
|
|
sc->md.size = 0xc000;
|
|
dev_p->isahd.id_msize = sc->md.size;
|
|
}
|
|
if (sc->md.card != 0) {
|
|
printf("ray%d: Fixing up CM card address from 0x%lx to 0x0\n",
|
|
sc->unit, sc->md.card);
|
|
doRemap = 1;
|
|
sc->md.card = 0;
|
|
}
|
|
if (doRemap)
|
|
ray_attr_cm(sc);
|
|
#endif /* RAY_NEED_CM_FIXUP */
|
|
|
|
sc->gone = 0;
|
|
sc->unit = dev_p->isahd.id_unit;
|
|
sc->maddr = dev_p->isahd.id_maddr;
|
|
sc->flags = dev_p->isahd.id_flags;
|
|
|
|
printf("ray%d: <Raylink/IEEE 802.11> maddr %p msize 0x%x irq %d flags 0x%x on isa (PC-Card slot %d)\n",
|
|
sc->unit,
|
|
sc->maddr,
|
|
dev_p->isahd.id_msize,
|
|
ffs(dev_p->isahd.id_irq) - 1,
|
|
sc->flags,
|
|
sc->slotnum);
|
|
|
|
if (ray_attach(&dev_p->isahd))
|
|
return (ENXIO);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* PCCard unload.
|
|
*/
|
|
static void
|
|
ray_pccard_unload(dev_p)
|
|
struct pccard_devinfo *dev_p;
|
|
{
|
|
struct ray_softc *sc;
|
|
struct ifnet *ifp;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: PCCard unload\n", dev_p->isahd.id_unit));
|
|
|
|
sc = &ray_softc[dev_p->isahd.id_unit];
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
if (sc->gone) {
|
|
printf("ray%d: already unloaded\n", sc->unit);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Clear out timers and sort out driver state
|
|
*
|
|
* We use callout_stop to unconditionally kill the ccs and general
|
|
* timers as they are used with multiple arguments.
|
|
*/
|
|
#if RAY_USE_CALLOUT_STOP
|
|
callout_stop(sc->ccs_timerh);
|
|
callout_stop(sc->reset_timerh);
|
|
#else
|
|
untimeout(ray_check_ccs, sc, sc->ccs_timerh);
|
|
untimeout(ray_check_scheduled, sc, sc->ccs_timerh);
|
|
untimeout(ray_reset_timo, sc, sc->reset_timerh);
|
|
#endif /* RAY_USE_CALLOUT_STOP */
|
|
#if RAY_NEED_STARTJOIN_TIMO
|
|
untimeout(ray_start_join_timo, sc, sc->sj_timerh);
|
|
#endif /* RAY_NEED_STARTJOIN_TIMO */
|
|
untimeout(ray_start_timo, sc, sc->start_timerh);
|
|
sc->sc_havenet = 0;
|
|
|
|
/*
|
|
* Mark as not running
|
|
*/
|
|
ifp->if_flags &= ~IFF_RUNNING;
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
|
|
/*
|
|
* Cleardown interface
|
|
*/
|
|
if_down(ifp); /* XXX should be if_detach for -current */
|
|
|
|
/*
|
|
* Mark card as gone
|
|
*/
|
|
sc->gone = 1;
|
|
printf("ray%d: unloaded\n", sc->unit);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* process an interrupt
|
|
*/
|
|
static int
|
|
ray_pccard_intr(dev_p)
|
|
struct pccard_devinfo *dev_p;
|
|
{
|
|
return (ray_intr(dev_p));
|
|
}
|
|
|
|
/*
|
|
* ISA probe routine.
|
|
*/
|
|
static int
|
|
ray_probe(dev_p)
|
|
struct isa_device *dev_p;
|
|
{
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ISA probe\n", dev_p->id_unit));
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* ISA/PCCard attach.
|
|
*/
|
|
static int
|
|
ray_attach(dev_p)
|
|
struct isa_device *dev_p;
|
|
{
|
|
struct ray_softc *sc;
|
|
struct ray_ecf_startup_v5 *ep;
|
|
struct ifnet *ifp;
|
|
char ifname[IFNAMSIZ];
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ISA/PCCard attach\n", dev_p->id_unit));
|
|
|
|
sc = &ray_softc[dev_p->id_unit];
|
|
RAY_MAP_CM(sc);
|
|
|
|
if (sc->gone) {
|
|
printf("ray%d: unloaded before attach!\n", sc->unit);
|
|
return (1);
|
|
}
|
|
|
|
/*
|
|
* Read startup results, check the card is okay and work out what
|
|
* version we are using.
|
|
*/
|
|
ep = &sc->sc_ecf_startup;
|
|
ray_read_region(sc, RAY_ECF_TO_HOST_BASE, ep, sizeof(sc->sc_ecf_startup));
|
|
if (ep->e_status != RAY_ECFS_CARD_OK) {
|
|
printf("ray%d: card failed self test: status 0x%b\n", sc->unit,
|
|
ep->e_status,
|
|
"\020" /* print in hex */
|
|
"\001RESERVED0"
|
|
"\002PROC_SELF_TEST"
|
|
"\003PROG_MEM_CHECKSUM"
|
|
"\004DATA_MEM_TEST"
|
|
"\005RX_CALIBRATION"
|
|
"\006FW_VERSION_COMPAT"
|
|
"\007RERSERVED1"
|
|
"\008TEST_COMPLETE"
|
|
);
|
|
return (1);
|
|
}
|
|
if (sc->sc_version != RAY_ECFS_BUILD_4 &&
|
|
sc->sc_version != RAY_ECFS_BUILD_5
|
|
) {
|
|
printf("ray%d: unsupported firmware version 0x%0x\n", sc->unit,
|
|
ep->e_fw_build_string);
|
|
return (1);
|
|
}
|
|
|
|
if (bootverbose || RAY_DEBUG) {
|
|
printf("ray%d: Start Up Results\n", sc->unit);
|
|
if (sc->sc_version == RAY_ECFS_BUILD_4)
|
|
printf(" Firmware version 4\n");
|
|
else
|
|
printf(" Firmware version 5\n");
|
|
printf(" Status 0x%x\n", ep->e_status);
|
|
printf(" Ether address %6D\n", ep->e_station_addr, ":");
|
|
if (sc->sc_version == RAY_ECFS_BUILD_4) {
|
|
printf(" Program checksum %0x\n", ep->e_resv0);
|
|
printf(" CIS checksum %0x\n", ep->e_rates[0]);
|
|
} else {
|
|
printf(" (reserved word) %0x\n", ep->e_resv0);
|
|
printf(" Supported rates %8D\n", ep->e_rates, ":");
|
|
}
|
|
printf(" Japan call sign %12D\n", ep->e_japan_callsign, ":");
|
|
if (sc->sc_version == RAY_ECFS_BUILD_5) {
|
|
printf(" Program checksum %0x\n", ep->e_prg_cksum);
|
|
printf(" CIS checksum %0x\n", ep->e_cis_cksum);
|
|
printf(" Firmware version %0x\n", ep->e_fw_build_string);
|
|
printf(" Firmware revision %0x\n", ep->e_fw_build);
|
|
printf(" (reserved word) %0x\n", ep->e_fw_resv);
|
|
printf(" ASIC version %0x\n", ep->e_asic_version);
|
|
printf(" TIB size %0x\n", ep->e_tibsize);
|
|
}
|
|
}
|
|
|
|
/* Reset any pending interrupts */
|
|
RAY_HCS_CLEAR_INTR(sc);
|
|
|
|
/*
|
|
* Set the parameters that will survive stop/init
|
|
*
|
|
* Do not update these in ray_init's parameter setup
|
|
*/
|
|
#if XXX
|
|
see the ray_init section for stuff to move
|
|
#endif
|
|
bzero(&sc->sc_d, sizeof(struct ray_nw_param));
|
|
bzero(&sc->sc_c, sizeof(struct ray_nw_param));
|
|
|
|
/*
|
|
* Initialise the network interface structure
|
|
*/
|
|
bcopy((char *)&ep->e_station_addr,
|
|
(char *)&sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
|
|
ifp = &sc->arpcom.ac_if;
|
|
ifp->if_softc = sc;
|
|
ifp->if_name = "ray";
|
|
ifp->if_unit = sc->unit;
|
|
ifp->if_timer = 0;
|
|
ifp->if_flags = (IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST);
|
|
ifp->if_hdrlen = sizeof(struct ieee80211_header) +
|
|
sizeof(struct ether_header);
|
|
ifp->if_baudrate = 1000000; /* Is this baud or bps ;-) */
|
|
|
|
ifp->if_output = ether_output;
|
|
ifp->if_start = ray_start;
|
|
ifp->if_ioctl = ray_ioctl;
|
|
ifp->if_watchdog = ray_watchdog;
|
|
ifp->if_init = ray_init;
|
|
ifp->if_snd.ifq_maxlen = IFQ_MAXLEN;
|
|
|
|
/*
|
|
* If this logical interface has already been attached,
|
|
* don't attach it again or chaos will ensue.
|
|
*/
|
|
sprintf(ifname, "ray%d", sc->unit);
|
|
|
|
if (ifunit(ifname) == NULL) {
|
|
callout_handle_init(&sc->ccs_timerh);
|
|
callout_handle_init(&sc->reset_timerh);
|
|
#if RAY_NEED_STARTJOIN_TIMO
|
|
callout_handle_init(&sc->sj_timerh);
|
|
#endif /* RAY_NEED_STARTJOIN_TIMO */
|
|
callout_handle_init(&sc->start_timerh);
|
|
if_attach(ifp);
|
|
ether_ifattach(ifp);
|
|
#if NBPFILTER > 0
|
|
bpfattach(ifp, DLT_EN10MB, sizeof(struct ether_header));
|
|
#endif /* NBFFILTER */
|
|
|
|
#if XXX
|
|
this looks like a good idea
|
|
at_shutdown(ray_shutdown, sc, SHUTDOWN_POST_SYNC);
|
|
#endif /* XXX */
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Network initialisation.
|
|
*
|
|
* Start up flow is as follows.
|
|
* The kernel calls ray_init when the interface is assigned an address.
|
|
*
|
|
* ray_init does a bit of house keeping before calling ray_download_params.
|
|
*
|
|
* ray_download_params fills the startup parameter structure out and
|
|
* sends it to the card. The download command simply completes, so we
|
|
* use the timeout code in ray_check_ccs instead of spin locking. The
|
|
* passes flow to the standard ccs handler and we eventually end up in
|
|
* ray_download_done.
|
|
*
|
|
* ray_download_done tells the card to start an adhoc network or join
|
|
* a managed network. This should complete via the interrupt
|
|
* mechanism, but the NetBSD driver includes a timeout for some buggy
|
|
* stuff somewhere - I've left the hooks in but don't use them. The
|
|
* interrupt handler passes control to ray_start_join_done - the ccs
|
|
* is handled by the interrupt mechanism.
|
|
*
|
|
* Once ray_start_join_done has checked the ccs and uploaded/updated
|
|
* the network parameters we are ready to process packets. It is then
|
|
* safe to call ray_start which is done by the interrupt handler.
|
|
*/
|
|
static void
|
|
ray_init(xsc)
|
|
void *xsc;
|
|
{
|
|
struct ray_softc *sc = xsc;
|
|
struct ray_ecf_startup_v5 *ep;
|
|
struct ifnet *ifp;
|
|
size_t ccs;
|
|
int i;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: Network init\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
if (sc->gone) {
|
|
printf("ray%d: unloaded before init!\n", sc->unit);
|
|
return;
|
|
}
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
if ((ifp->if_flags & IFF_RUNNING))
|
|
ray_stop(sc);
|
|
|
|
/*
|
|
* Reset instance variables
|
|
*
|
|
* The first set are network parameters that are read back when
|
|
* the card starts or joins the network.
|
|
*
|
|
* The second set are network parameters that are downloaded to
|
|
* the card.
|
|
*
|
|
* The third set are driver parameters.
|
|
*
|
|
* All of the variables in these sets can be updated by the card or ioctls.
|
|
*/
|
|
#if XXX
|
|
see the ray_attach section for stuff to move
|
|
#endif
|
|
sc->sc_d.np_upd_param = 0;
|
|
bzero(sc->sc_d.np_bss_id, ETHER_ADDR_LEN);
|
|
sc->sc_d.np_inited = 0;
|
|
sc->sc_d.np_def_txrate = RAY_MIB_BASIC_RATE_SET_DEFAULT;
|
|
sc->sc_d.np_encrypt = 0;
|
|
|
|
sc->sc_d.np_ap_status = RAY_MIB_AP_STATUS_DEFAULT;
|
|
sc->sc_d.np_net_type = RAY_MIB_NET_TYPE_DEFAULT;
|
|
bzero(sc->sc_d.np_ssid, IEEE80211_NWID_LEN);
|
|
strncpy(sc->sc_d.np_ssid, RAY_MIB_SSID_DEFAULT, IEEE80211_NWID_LEN);
|
|
sc->sc_d.np_priv_start = RAY_MIB_PRIVACY_MUST_START_DEFAULT;
|
|
sc->sc_d.np_priv_join = RAY_MIB_PRIVACY_CAN_JOIN_DEFAULT;
|
|
sc->sc_promisc = !!(ifp->if_flags & (IFF_PROMISC|IFF_ALLMULTI));
|
|
|
|
sc->sc_havenet = 0;
|
|
sc->translation = SC_TRANSLATE_WEBGEAR;
|
|
|
|
/* Set all ccs to be free */
|
|
bzero(sc->sc_ccsinuse, sizeof(sc->sc_ccsinuse));
|
|
ccs = RAY_CCS_ADDRESS(0);
|
|
for (i = 0; i < RAY_CCS_LAST; ccs += RAY_CCS_SIZE, i++)
|
|
RAY_CCS_FREE(sc, ccs);
|
|
|
|
/* Clear any pending interrupts */
|
|
RAY_HCS_CLEAR_INTR(sc);
|
|
|
|
#if XXX
|
|
Not sure why I really need this - maybe best to deal with
|
|
this when resets are requested by me?
|
|
#endif /* XXX */
|
|
/*
|
|
* Get startup results - the card may have been reset
|
|
*/
|
|
ep = &sc->sc_ecf_startup;
|
|
ray_read_region(sc, RAY_ECF_TO_HOST_BASE, ep, sizeof(sc->sc_ecf_startup));
|
|
if (ep->e_status != RAY_ECFS_CARD_OK) {
|
|
printf("ray%d: card failed self test: status 0x%b\n", sc->unit,
|
|
ep->e_status,
|
|
"\020" /* print in hex */
|
|
"\001RESERVED0"
|
|
"\002PROC_SELF_TEST"
|
|
"\003PROG_MEM_CHECKSUM"
|
|
"\004DATA_MEM_TEST"
|
|
"\005RX_CALIBRATION"
|
|
"\006FW_VERSION_COMPAT"
|
|
"\007RERSERVED1"
|
|
"\008TEST_COMPLETE"
|
|
);
|
|
return; /* XXX This doesn't mark the interface as down */
|
|
}
|
|
|
|
/*
|
|
* Fixup tib size to be correct - on build 4 it is garbage
|
|
*/
|
|
if (sc->sc_version == RAY_ECFS_BUILD_4 && sc->sc_tibsize == 0x55)
|
|
sc->sc_tibsize = sizeof(struct ray_tx_tib);
|
|
|
|
/*
|
|
* We are now up and running. Next we have to download network
|
|
* configuration into the card. We are busy until download is done.
|
|
*/
|
|
ifp->if_flags |= IFF_RUNNING | IFF_OACTIVE;
|
|
|
|
ray_download_params(sc);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Network stop.
|
|
*
|
|
* Assumes that a ray_init is used to restart the card.
|
|
*
|
|
*/
|
|
static void
|
|
ray_stop(sc)
|
|
struct ray_softc *sc;
|
|
{
|
|
struct ifnet *ifp;
|
|
int s;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: Network stop\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
if (sc->gone) {
|
|
printf("ray%d: unloaded before stop!\n", sc->unit);
|
|
return;
|
|
}
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
/*
|
|
* Clear out timers and sort out driver state
|
|
*/
|
|
#if RAY_USE_CALLOUT_STOP
|
|
callout_stop(sc->ccs_timerh);
|
|
callout_stop(sc->reset_timerh);
|
|
#else
|
|
untimeout(ray_check_ccs, sc, sc->ccs_timerh);
|
|
untimeout(ray_check_scheduled, sc, sc->ccs_timerh);
|
|
untimeout(ray_reset_timo, sc, sc->reset_timerh);
|
|
#endif /* RAY_USE_CALLOUT_STOP */
|
|
#if RAY_NEED_STARTJOIN_TIMO
|
|
untimeout(ray_start_join_timo, sc, sc->sj_timerh);
|
|
#endif /* RAY_NEED_STARTJOIN_TIMO */
|
|
untimeout(ray_start_timo, sc, sc->start_timerh);
|
|
sc->sc_havenet = 0;
|
|
sc->sc_rxoverflow = 0;
|
|
sc->sc_rxcksum = 0;
|
|
sc->sc_rxhcksum = 0;
|
|
sc->sc_rxnoise = 0;
|
|
|
|
/*
|
|
* Inhibit card - if we can't prevent reception then do not worry;
|
|
* stopping a NIC only guarantees no TX.
|
|
*/
|
|
s = splimp();
|
|
/* XXX what does the SHUTDOWN command do? Or power saving in COR */
|
|
splx(s);
|
|
|
|
/*
|
|
* Mark as not running
|
|
*/
|
|
ifp->if_flags &= ~IFF_RUNNING;
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Reset the card
|
|
*
|
|
* I'm using the soft reset command in the COR register. I'm not sure
|
|
* if the sequence is right but it does seem to do the right thing. A
|
|
* nano second after reset is written the flashing light goes out, and
|
|
* a few seconds after the default is written the main card light goes
|
|
* out. We wait a while and then re-init the card.
|
|
*/
|
|
static void
|
|
ray_reset(sc)
|
|
struct ray_softc *sc;
|
|
{
|
|
struct ifnet *ifp;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_reset\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
if (ifp->if_flags & IFF_RUNNING)
|
|
ray_stop(sc);
|
|
|
|
printf("ray%d: resetting card\n", sc->unit);
|
|
ray_attr_write((sc), RAY_COR, RAY_COR_RESET);
|
|
ray_attr_write((sc), RAY_COR, RAY_COR_DEFAULT);
|
|
sc->reset_timerh = timeout(ray_reset_timo, sc, RAY_RESET_TIMEOUT);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Finishing resetting and restarting the card
|
|
*/
|
|
static void
|
|
ray_reset_timo(xsc)
|
|
void *xsc;
|
|
{
|
|
struct ray_softc *sc = xsc;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_reset_timo\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
if (!RAY_ECF_READY(sc)) {
|
|
RAY_DPRINTFN(1, ("ray%d: ray_reset_timo still busy, re-schedule\n",
|
|
sc->unit));
|
|
sc->reset_timerh = timeout(ray_reset_timo, sc, RAY_RESET_TIMEOUT);
|
|
return;
|
|
}
|
|
|
|
RAY_HCS_CLEAR_INTR(sc);
|
|
ray_init(sc);
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
ray_watchdog(ifp)
|
|
register struct ifnet *ifp;
|
|
{
|
|
struct ray_softc *sc;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: Network watchdog\n", ifp->if_unit));
|
|
|
|
sc = ifp->if_softc;
|
|
RAY_MAP_CM(sc);
|
|
|
|
if (sc->gone) {
|
|
printf("ray%d: unloaded before watchdog!\n", sc->unit);
|
|
return;
|
|
}
|
|
|
|
printf("ray%d: watchdog timeout\n", sc->unit);
|
|
|
|
/* XXX may need to have remedial action here
|
|
for example
|
|
ray_reset
|
|
ray_stop
|
|
...
|
|
ray_init
|
|
|
|
do we only use on TX?
|
|
if so then we should clear OACTIVE etc.
|
|
|
|
*/
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Network ioctl request.
|
|
*/
|
|
static int
|
|
ray_ioctl(ifp, command, data)
|
|
register struct ifnet *ifp;
|
|
u_long command;
|
|
caddr_t data;
|
|
{
|
|
struct ray_softc *sc;
|
|
struct ray_param_req pr;
|
|
struct ray_stats_req sr;
|
|
struct ifreq *ifr;
|
|
int s, error, error2;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: Network ioctl\n", ifp->if_unit));
|
|
|
|
sc = ifp->if_softc;
|
|
RAY_MAP_CM(sc);
|
|
|
|
if (sc->gone) {
|
|
printf("ray%d: unloaded before ioctl!\n", sc->unit);
|
|
ifp->if_flags &= ~IFF_RUNNING;
|
|
return (ENXIO);
|
|
}
|
|
|
|
ifr = (struct ifreq *)data;
|
|
error = 0;
|
|
error2 = 0;
|
|
|
|
s = splimp();
|
|
|
|
switch (command) {
|
|
|
|
case SIOCSIFADDR:
|
|
case SIOCGIFADDR:
|
|
case SIOCSIFMTU:
|
|
RAY_DPRINTFN(30, ("ray%d: ioctl SIFADDR/GIFADDR/SIFMTU\n", sc->unit));
|
|
error = ether_ioctl(ifp, command, data);
|
|
break;
|
|
|
|
case SIOCSIFFLAGS:
|
|
RAY_DPRINTFN(30, ("ray%d: for SIFFLAGS\n", sc->unit));
|
|
/*
|
|
* If the interface is marked up and stopped, then start
|
|
* it. If it is marked down and running, then stop it.
|
|
*/
|
|
if (ifp->if_flags & IFF_UP) {
|
|
if (!(ifp->if_flags & IFF_RUNNING))
|
|
ray_init(sc);
|
|
ray_update_promisc(sc);
|
|
} else {
|
|
if (ifp->if_flags & IFF_RUNNING)
|
|
ray_stop(sc);
|
|
}
|
|
/* XXX DROP THROUGH or not? */
|
|
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
RAY_DPRINTFN(30, ("ray%d: ioctl called for ADDMULTI/DELMULTI\n", sc->unit));
|
|
ray_update_mcast(sc);
|
|
error = 0;
|
|
break;
|
|
|
|
case SIOCSRAYPARAM:
|
|
RAY_DPRINTFN(30, ("ray%d: ioctl called for SRAYPARAM\n", sc->unit));
|
|
if ((error = copyin(ifr->ifr_data, &pr, sizeof(pr))))
|
|
break;
|
|
error = ray_user_update_params(sc, &pr);
|
|
error2 = copyout(&pr, ifr->ifr_data, sizeof(pr));
|
|
error = error2 ? error2 : error;
|
|
break;
|
|
|
|
case SIOCGRAYPARAM:
|
|
RAY_DPRINTFN(30, ("ray%d: ioctl called for GRAYPARAM\n", sc->unit));
|
|
if ((error = copyin(ifr->ifr_data, &pr, sizeof(pr))))
|
|
break;
|
|
error = ray_user_report_params(sc, &pr);
|
|
error2 = copyout(&pr, ifr->ifr_data, sizeof(pr));
|
|
error = error2 ? error2 : error;
|
|
break;
|
|
|
|
case SIOCGRAYSTATS:
|
|
RAY_DPRINTFN(30, ("ray%d: ioctl called for GRAYSTATS\n", sc->unit));
|
|
error = ray_user_report_stats(sc, &sr);
|
|
error2 = copyout(&sr, ifr->ifr_data, sizeof(sr));
|
|
error = error2 ? error2 : error;
|
|
break;
|
|
|
|
case SIOCGRAYSIGLEV:
|
|
RAY_DPRINTFN(30, ("ray%d: ioctl called for GRAYSIGLEV\n",
|
|
sc->unit));
|
|
error = copyout(sc->sc_siglevs, ifr->ifr_data,
|
|
sizeof(sc->sc_siglevs));
|
|
break;
|
|
|
|
case SIOCGIFFLAGS:
|
|
RAY_DPRINTFN(30, ("ray%d: ioctl called for GIFFLAGS\n", sc->unit));
|
|
error = EINVAL;
|
|
break;
|
|
|
|
case SIOCGIFMETRIC:
|
|
RAY_DPRINTFN(30, ("ray%d: ioctl called for GIFMETRIC\n", sc->unit));
|
|
error = EINVAL;
|
|
break;
|
|
|
|
case SIOCGIFMTU:
|
|
RAY_DPRINTFN(30, ("ray%d: ioctl called for GIFMTU\n", sc->unit));
|
|
error = EINVAL;
|
|
break;
|
|
|
|
case SIOCGIFPHYS:
|
|
RAY_DPRINTFN(30, ("ray%d: ioctl called for GIFPYHS\n", sc->unit));
|
|
error = EINVAL;
|
|
break;
|
|
|
|
case SIOCSIFMEDIA:
|
|
RAY_DPRINTFN(30, ("ray%d: ioctl called for SIFMEDIA\n", sc->unit));
|
|
error = EINVAL;
|
|
break;
|
|
|
|
case SIOCGIFMEDIA:
|
|
RAY_DPRINTFN(30, ("ray%d: ioctl called for GIFMEDIA\n", sc->unit));
|
|
error = EINVAL;
|
|
break;
|
|
|
|
default:
|
|
error = EINVAL;
|
|
}
|
|
|
|
splx(s);
|
|
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Network start.
|
|
*
|
|
* Start sending a packet.
|
|
*
|
|
* We make two assumptions here:
|
|
* 1) That the current priority is set to splimp _before_ this code
|
|
* is called *and* is returned to the appropriate priority after
|
|
* return
|
|
* 2) That the IFF_OACTIVE flag is checked before this code is called
|
|
* (i.e. that the output part of the interface is idle)
|
|
*/
|
|
static void
|
|
ray_start(struct ifnet *ifp)
|
|
{
|
|
RAY_DPRINTFN(5, ("ray%d: ray_start\n", ifp->if_unit));
|
|
|
|
ray_start_sc(ifp->if_softc);
|
|
}
|
|
|
|
static void
|
|
ray_start_sc(sc)
|
|
struct ray_softc *sc;
|
|
{
|
|
struct ifnet *ifp;
|
|
struct mbuf *m0, *m;
|
|
struct ether_header *eh;
|
|
size_t ccs, bufp;
|
|
int i, pktlen, len;
|
|
u_int8_t status;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_start_sc\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
/*
|
|
* Some simple checks first
|
|
*/
|
|
if (sc->gone) {
|
|
printf("ray%d: unloaded before start!\n", sc->unit);
|
|
return;
|
|
}
|
|
if ((ifp->if_flags & IFF_RUNNING) == 0 || !sc->sc_havenet)
|
|
return;
|
|
if (!RAY_ECF_READY(sc)) {
|
|
RAY_DPRINTFN(1, ("ray%d: ray_start busy, schedule a timeout\n",
|
|
sc->unit));
|
|
sc->start_timerh = timeout(ray_start_timo, sc, RAY_START_TIMEOUT);
|
|
return;
|
|
} else
|
|
untimeout(ray_start_timo, sc, sc->start_timerh);
|
|
|
|
/*
|
|
* Simple one packet at a time TX routine - probably appaling performance
|
|
* and we certainly chew CPU. However bing to windows boxes shows
|
|
* a reliance on the far end too:
|
|
*
|
|
* 1500k default rate
|
|
*
|
|
* Libretto 50CT (75MHz Pentium) with FreeBSD-3.1 to
|
|
* Nonname box Windows 95C (133MHz AMD 5x86) 996109bps
|
|
* AST J30 Windows 95A (100MHz Pentium) 1307791bps
|
|
*
|
|
* 2000k default rate
|
|
*
|
|
* Libretto 50CT (75MHz Pentium) with FreeBSD-3.1 to
|
|
* Nonname box Windows 95C (133MHz AMD 5x86) 1087049bps
|
|
* AST J30 Windows 95A (100MHz Pentium) 1307791bps
|
|
*
|
|
* Flow is
|
|
* get a ccs
|
|
* build the packet
|
|
* set IFF_OACTIVE
|
|
* interrupt the card to send the packet
|
|
* exit
|
|
*
|
|
* wait for interrupt telling us the packet has been sent
|
|
* clear IFF_OACTIVE
|
|
* get called by the interrupt routine if any packets left
|
|
*/
|
|
|
|
/*
|
|
* Find a free ccs; if none available wave good bye and exit.
|
|
*
|
|
* We find a ccs before we process the mbuf so that we are sure it
|
|
* is worthwhile processing the packet. All errors in the mbuf
|
|
* processing are either errors in the mbuf or gross configuration
|
|
* errors and the packet wouldn't get through anyway.
|
|
*
|
|
* Don't forget to clear the ccs on errors.
|
|
*/
|
|
i = RAY_CCS_TX_FIRST;
|
|
do {
|
|
status = SRAM_READ_FIELD_1(sc, RAY_CCS_ADDRESS(i), ray_cmd, c_status);
|
|
if (status == RAY_CCS_STATUS_FREE)
|
|
break;
|
|
i++;
|
|
} while (i <= RAY_CCS_TX_LAST);
|
|
if (i > RAY_CCS_TX_LAST) {
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
return;
|
|
}
|
|
RAY_DPRINTFN(20, ("ray%d: ray_start using ccs 0x%02x\n", sc->unit, i));
|
|
|
|
/*
|
|
* Reserve and fill the ccs - must do the length later.
|
|
*
|
|
* Even though build 4 and build 5 have different fields all these
|
|
* are common apart from tx_rate. Neither the NetBSD driver or Linux
|
|
* driver bother to overwrite this for build 4 cards.
|
|
*/
|
|
ccs = RAY_CCS_ADDRESS(i);
|
|
bufp = RAY_TX_BASE + i * RAY_TX_BUF_SIZE;
|
|
bufp += sc->sc_tibsize;
|
|
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd_tx, c_status, RAY_CCS_STATUS_BUSY);
|
|
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd_tx, c_cmd, RAY_CMD_TX_REQ);
|
|
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd_tx, c_link, RAY_CCS_LINK_NULL);
|
|
SRAM_WRITE_FIELD_2(sc, ccs, ray_cmd_tx, c_bufp, bufp);
|
|
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd_tx, c_tx_rate, sc->sc_c.np_def_txrate);
|
|
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd_tx, c_apm_mode, 0); /* XXX */
|
|
bufp += sizeof(struct ray_tx_phy_header);
|
|
|
|
/*
|
|
* Get the mbuf and process it - we have to remember to free the
|
|
* ccs if there are any errors
|
|
*/
|
|
IF_DEQUEUE(&ifp->if_snd, m0);
|
|
if (m0 == NULL) {
|
|
RAY_CCS_FREE(sc, ccs);
|
|
return;
|
|
}
|
|
eh = mtod(m0, struct ether_header *);
|
|
|
|
for (pktlen = 0, m = m0; m != NULL; m = m->m_next) {
|
|
pktlen += m->m_len;
|
|
}
|
|
if (pktlen > ETHER_MAX_LEN - ETHER_CRC_LEN) {
|
|
RAY_DPRINTFN(1, ("ray%d: mbuf too long %d\n", sc->unit, pktlen));
|
|
RAY_CCS_FREE(sc, ccs);
|
|
ifp->if_oerrors++;
|
|
m_freem(m0);
|
|
return;
|
|
}
|
|
|
|
/* XXX
|
|
* I would much prefer to have the complete 802.11 packet dropped to
|
|
* the bpf tap and then have a user land program parse the headers
|
|
* as needed. This way, tcpdump -w can be used to grab the raw data. If
|
|
* needed the 802.11 aware program can "translate" the .11 to ethernet
|
|
* for tcpdump -r.
|
|
*/
|
|
#if NBPFILTER > 0
|
|
if (ifp->if_bpf)
|
|
bpf_mtap(ifp, m0);
|
|
#endif /* NBPFILTER */
|
|
|
|
/*
|
|
* Translation - capability as described earlier
|
|
*
|
|
* Each case must write the 802.11 header using ray_start_wrhdr,
|
|
* passing a pointer to the ethernet header in and getting a new
|
|
* tc buffer pointer. Next remove/modify/addto the 802.3 and 802.2
|
|
* headers as needed.
|
|
*
|
|
* We've pulled up the mbuf for you.
|
|
*
|
|
*/
|
|
if (m0->m_len < sizeof(struct ether_header))
|
|
m = m_pullup(m, sizeof(struct ether_header));
|
|
if (m0 == NULL) {
|
|
RAY_DPRINTFN(1, ("ray%d: ray_start could not pullup ether\n", sc->unit));
|
|
RAY_CCS_FREE(sc, ccs);
|
|
ifp->if_oerrors++;
|
|
return;
|
|
}
|
|
switch (sc->translation) {
|
|
|
|
case SC_TRANSLATE_WEBGEAR:
|
|
bufp = ray_start_wrhdr(sc, eh, bufp);
|
|
break;
|
|
|
|
default:
|
|
printf("ray%d: ray_start unknown translation type 0x%x - why?\n",
|
|
sc->unit, sc->translation);
|
|
RAY_CCS_FREE(sc, ccs);
|
|
ifp->if_oerrors++;
|
|
m0 = m_free(m0);
|
|
return;
|
|
|
|
}
|
|
if (m0 == NULL) {
|
|
RAY_DPRINTFN(1, ("ray%d: ray_start could not translate mbuf\n", sc->unit));
|
|
RAY_CCS_FREE(sc, ccs);
|
|
ifp->if_oerrors++;
|
|
return;
|
|
}
|
|
pktlen = sizeof(struct ieee80211_header);
|
|
|
|
/*
|
|
* Copy the mbuf to the buffer in common memory
|
|
*
|
|
* We panic and don't bother wrapping as ethernet packets are 1518
|
|
* bytes, we checked the mbuf earlier, and our TX buffers are 2048
|
|
* bytes. We don't have 530 bytes of headers etc. so something
|
|
* must be fubar.
|
|
*/
|
|
for (m = m0; m != NULL; m = m->m_next) {
|
|
pktlen += m->m_len;
|
|
if ((len = m->m_len) == 0)
|
|
continue;
|
|
if ((bufp + len) < RAY_TX_END)
|
|
ray_write_region(sc, bufp, mtod(m, u_int8_t *), len);
|
|
else
|
|
panic("ray%d: ray_start tx buffer overflow\n", sc->unit);
|
|
bufp += len;
|
|
}
|
|
RAY_DMBUF_DUMP(sc, m0, "ray_start");
|
|
|
|
/*
|
|
* Fill in a few loose ends and kick the card to send the packet
|
|
*/
|
|
if (!RAY_ECF_READY(sc)) {
|
|
/*
|
|
* From NetBSD code:
|
|
*
|
|
* If this can really happen perhaps we need to save
|
|
* the chain and use it later. I think this might
|
|
* be a confused state though because we check above
|
|
* and don't issue any commands between.
|
|
*/
|
|
printf("ray%d: ray_tx device busy\n", sc->unit);
|
|
RAY_CCS_FREE(sc, ccs);
|
|
ifp->if_oerrors++;
|
|
return;
|
|
}
|
|
SRAM_WRITE_FIELD_2(sc, ccs, ray_cmd_tx, c_len, pktlen);
|
|
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd_tx, c_antenna,
|
|
ray_start_best_antenna(sc, eh->ether_dhost));
|
|
SRAM_WRITE_1(sc, RAY_SCB_CCSI, ccs);
|
|
ifp->if_opackets++;
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
RAY_ECF_START_CMD(sc);
|
|
m_free(m0);
|
|
|
|
return;
|
|
}
|
|
#if XXX_NETBSDTX
|
|
netbsd
|
|
|
|
driver uses a loop
|
|
repeat
|
|
get a ccs
|
|
get a mbuf
|
|
translate and send packet to shared ram
|
|
until (no more ccs's) || (no more mbuf's)
|
|
|
|
send ccs chain to card
|
|
|
|
exit
|
|
|
|
Linux
|
|
|
|
driver is simple single shot packet (with a lot of spinlocks!)
|
|
|
|
general
|
|
|
|
the tx space is 0x7000 = 28kB, and TX buffer size is 2048 so there
|
|
can be 14 requests at 2kB each
|
|
|
|
from this 2k we have to remove the TIB - whatever that is - for data
|
|
|
|
|
|
netbsd:
|
|
we need to call _start after receiveing a packet to see
|
|
if any packets were queued whilst in the interrupt
|
|
|
|
there is a potential race in obtaining ccss for the tx, in that
|
|
we might be in _start synchronously and then an rx interrupt
|
|
occurs. the rx will call _start and steal tx ccs from underneath
|
|
the interrupted entry.
|
|
|
|
toptions
|
|
dont call _start from rx interrupt
|
|
|
|
find a safe way of locking
|
|
|
|
find a better way of obtaining ccs using next free avilable?
|
|
|
|
look at other drivers
|
|
|
|
use tsleep/wakeup
|
|
|
|
some form of ring to hold ccs
|
|
|
|
free lsit
|
|
|
|
rework calling
|
|
#endif XXX_NETBSDTX
|
|
/******************************************************************************
|
|
* XXX NOT KNF FROM HERE UP
|
|
******************************************************************************/
|
|
|
|
/*
|
|
* TX completion routine.
|
|
*
|
|
* Clear ccs and network flags.
|
|
*/
|
|
static void
|
|
ray_start_done(struct ray_softc *sc, size_t ccs, u_int8_t status)
|
|
{
|
|
struct ifnet *ifp;
|
|
char *status_string[] = RAY_CCS_STATUS_STRINGS;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_start_done\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
if (status != RAY_CCS_STATUS_COMPLETE) {
|
|
printf("ray%d: ray_start tx completed but status is %s.\n",
|
|
sc->unit, status_string[status]);
|
|
ifp->if_oerrors++;
|
|
}
|
|
|
|
RAY_CCS_FREE(sc, ccs);
|
|
ifp->if_timer = 0;
|
|
if (ifp->if_flags & IFF_OACTIVE)
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
}
|
|
|
|
/*
|
|
* Start timeout routine.
|
|
*
|
|
* Used when card was busy but we needed to send a packet.
|
|
*/
|
|
static void
|
|
ray_start_timo(void *xsc)
|
|
{
|
|
struct ray_softc *sc = xsc;
|
|
struct ifnet *ifp;
|
|
int s;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_start_timo\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
if (!(ifp->if_flags & IFF_OACTIVE) && (ifp->if_snd.ifq_head != NULL)) {
|
|
s = splimp();
|
|
ray_start(ifp);
|
|
splx(s);
|
|
}
|
|
|
|
}
|
|
|
|
/*
|
|
* Write an 802.11 header into the TX buffer and return the
|
|
* adjusted buffer pointer.
|
|
*/
|
|
static size_t
|
|
ray_start_wrhdr(struct ray_softc *sc, struct ether_header *eh, size_t bufp)
|
|
{
|
|
struct ieee80211_header header;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_start_wrhdr\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
bzero(&header, sizeof(struct ieee80211_header));
|
|
|
|
header.i_fc[0] = (IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_DATA);
|
|
if (sc->sc_c.np_net_type == RAY_MIB_NET_TYPE_ADHOC) {
|
|
|
|
header.i_fc[1] = IEEE80211_FC1_STA_TO_STA;
|
|
bcopy(eh->ether_dhost, header.i_addr1, ETHER_ADDR_LEN);
|
|
bcopy(eh->ether_shost, header.i_addr2, ETHER_ADDR_LEN);
|
|
bcopy(sc->sc_c.np_bss_id, header.i_addr3, ETHER_ADDR_LEN);
|
|
|
|
} else {
|
|
if (sc->sc_c.np_ap_status == RAY_MIB_AP_STATUS_TERMINAL) {
|
|
|
|
header.i_fc[1] = IEEE80211_FC1_STA_TO_AP;
|
|
bcopy(sc->sc_c.np_bss_id, header.i_addr1,
|
|
ETHER_ADDR_LEN);
|
|
bcopy(eh->ether_shost, header.i_addr2, ETHER_ADDR_LEN);
|
|
bcopy(eh->ether_dhost, header.i_addr3, ETHER_ADDR_LEN);
|
|
|
|
} else
|
|
printf("ray%d: ray_start can't be an AP yet\n",
|
|
sc->unit);
|
|
}
|
|
|
|
ray_write_region(sc, bufp, (u_int8_t *)&header,
|
|
sizeof(struct ieee80211_header));
|
|
|
|
return (bufp + sizeof(struct ieee80211_header));
|
|
}
|
|
|
|
/*
|
|
* Determine best antenna to use from rx level and antenna cache
|
|
*/
|
|
static u_int8_t
|
|
ray_start_best_antenna(struct ray_softc *sc, u_int8_t *dst)
|
|
{
|
|
struct ray_siglev *sl;
|
|
int i;
|
|
u_int8_t antenna;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_start_best_antenna\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
if (sc->sc_version == RAY_ECFS_BUILD_4)
|
|
return (0);
|
|
|
|
/* try to find host */
|
|
for (i = 0; i < RAY_NSIGLEVRECS; i++) {
|
|
sl = &sc->sc_siglevs[i];
|
|
if (bcmp(sl->rsl_host, dst, ETHER_ADDR_LEN) == 0)
|
|
goto found;
|
|
}
|
|
/* not found, return default setting */
|
|
return (0);
|
|
|
|
found:
|
|
/* This is a simple thresholding scheme which takes the mean
|
|
* of the best antenna history. This is okay but as it is a
|
|
* filter, it adds a bit of lag in situations where the
|
|
* best antenna swaps from one side to the other slowly. Don't know
|
|
* how likely this is given the horrible fading though.
|
|
*/
|
|
antenna = 0;
|
|
for (i = 0; i < RAY_NANTENNA; i++) {
|
|
antenna += sl->rsl_antennas[i];
|
|
}
|
|
|
|
return (antenna > (RAY_NANTENNA >> 1));
|
|
}
|
|
|
|
/*
|
|
* receive a packet from the card
|
|
*/
|
|
static void
|
|
ray_rx(struct ray_softc *sc, size_t rcs)
|
|
{
|
|
struct ieee80211_header *header;
|
|
struct ether_header *eh;
|
|
struct ifnet *ifp;
|
|
struct mbuf *m0;
|
|
size_t pktlen, fraglen, readlen, tmplen;
|
|
size_t bufp, ebufp;
|
|
u_int8_t *dst, *src;
|
|
u_int8_t fc;
|
|
u_int8_t siglev, antenna;
|
|
u_int first, ni, i;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_rx\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
RAY_DPRINTFN(20, ("ray%d: rcs chain - using rcs 0x%x\n",
|
|
sc->unit, rcs));
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
m0 = NULL;
|
|
readlen = 0;
|
|
|
|
/*
|
|
* Get first part of packet and the length. Do some sanity checks
|
|
* and get a mbuf.
|
|
*/
|
|
first = RAY_CCS_INDEX(rcs);
|
|
pktlen = SRAM_READ_FIELD_2(sc, rcs, ray_cmd_rx, c_pktlen);
|
|
siglev = SRAM_READ_FIELD_1(sc, rcs, ray_cmd_rx, c_siglev);
|
|
antenna = SRAM_READ_FIELD_1(sc, rcs, ray_cmd_rx, c_antenna);
|
|
|
|
if ((pktlen > MCLBYTES) || (pktlen < sizeof(struct ieee80211_header))) {
|
|
RAY_DPRINTFN(1, ("ray%d: ray_rx packet is too big or too small\n",
|
|
sc->unit));
|
|
ifp->if_ierrors++;
|
|
goto skip_read;
|
|
}
|
|
|
|
MGETHDR(m0, M_DONTWAIT, MT_DATA);
|
|
if (m0 == NULL) {
|
|
RAY_DPRINTFN(1, ("ray%d: ray_rx MGETHDR failed\n", sc->unit));
|
|
ifp->if_ierrors++;
|
|
goto skip_read;
|
|
}
|
|
if (pktlen > MHLEN) {
|
|
MCLGET(m0, M_DONTWAIT);
|
|
if ((m0->m_flags & M_EXT) == 0) {
|
|
RAY_DPRINTFN(1, ("ray%d: ray_rx MCLGET failed\n",
|
|
sc->unit));
|
|
ifp->if_ierrors++;
|
|
m_freem(m0);
|
|
m0 = NULL;
|
|
goto skip_read;
|
|
}
|
|
}
|
|
m0->m_pkthdr.rcvif = ifp;
|
|
m0->m_pkthdr.len = pktlen;
|
|
m0->m_len = pktlen;
|
|
dst = mtod(m0, u_int8_t *);
|
|
|
|
/*
|
|
* Walk the fragment chain to build the complete packet.
|
|
*
|
|
* The use of two index variables removes a race with the
|
|
* hardware. If one index were used the clearing of the CCS would
|
|
* happen before reading the next pointer and the hardware can get in.
|
|
* Not my idea but verbatim from the NetBSD driver.
|
|
*/
|
|
i = ni = first;
|
|
while ((i = ni) && (i != RAY_CCS_LINK_NULL)) {
|
|
rcs = RAY_CCS_ADDRESS(i);
|
|
ni = SRAM_READ_FIELD_1(sc, rcs, ray_cmd_rx, c_nextfrag);
|
|
bufp = SRAM_READ_FIELD_2(sc, rcs, ray_cmd_rx, c_bufp);
|
|
fraglen = SRAM_READ_FIELD_2(sc, rcs, ray_cmd_rx, c_len);
|
|
RAY_DPRINTFN(50, ("ray%d: ray_rx frag index %d len %d bufp 0x%x ni %d\n",
|
|
sc->unit, i, fraglen, (int)bufp, ni));
|
|
|
|
if (fraglen + readlen > pktlen) {
|
|
RAY_DPRINTFN(1, ("ray%d: ray_rx bad length current 0x%x pktlen 0x%x\n",
|
|
sc->unit, fraglen + readlen, pktlen));
|
|
ifp->if_ierrors++;
|
|
m_freem(m0);
|
|
m0 = NULL;
|
|
goto skip_read;
|
|
}
|
|
if ((i < RAY_RCS_FIRST) || (i > RAY_RCS_LAST)) {
|
|
printf("ray%d: ray_rx bad rcs index 0x%x\n",
|
|
sc->unit, i);
|
|
ifp->if_ierrors++;
|
|
m_freem(m0);
|
|
m0 = NULL;
|
|
goto skip_read;
|
|
}
|
|
|
|
ebufp = bufp + fraglen;
|
|
if (ebufp <= RAY_RX_END)
|
|
ray_read_region(sc, bufp, dst, fraglen);
|
|
else {
|
|
ray_read_region(sc, bufp, dst,
|
|
(tmplen = RAY_RX_END - bufp));
|
|
ray_read_region(sc, RAY_RX_BASE, dst + tmplen,
|
|
ebufp - RAY_RX_END);
|
|
}
|
|
dst += fraglen;
|
|
readlen += fraglen;
|
|
}
|
|
|
|
skip_read:
|
|
|
|
/*
|
|
* Walk the chain again to free the rcss.
|
|
*/
|
|
i = ni = first;
|
|
while ((i = ni) && (i != RAY_CCS_LINK_NULL)) {
|
|
rcs = RAY_CCS_ADDRESS(i);
|
|
ni = SRAM_READ_FIELD_1(sc, rcs, ray_cmd_rx, c_nextfrag);
|
|
RAY_CCS_FREE(sc, rcs);
|
|
}
|
|
|
|
if (m0 == NULL)
|
|
return;
|
|
|
|
RAY_DMBUF_DUMP(sc, m0, "ray_rx");
|
|
|
|
/*
|
|
* Check the 802.11 packet type and obtain the .11 src addresses.
|
|
*
|
|
* XXX CTL and MGT packets will have separate functions, DATA with here
|
|
*
|
|
* XXX This needs some work for INFRA mode
|
|
*/
|
|
header = mtod(m0, struct ieee80211_header *);
|
|
fc = header->i_fc[0];
|
|
if ((fc & IEEE80211_FC0_VERSION_MASK) != IEEE80211_FC0_VERSION_0) {
|
|
RAY_DPRINTFN(1, ("ray%d: header not version 0 fc 0x%x\n",
|
|
sc->unit, fc));
|
|
ifp->if_ierrors++;
|
|
m_freem(m0);
|
|
return;
|
|
}
|
|
switch (fc & IEEE80211_FC0_TYPE_MASK) {
|
|
|
|
case IEEE80211_FC0_TYPE_MGT:
|
|
printf("ray%d: ray_rx got a MGT packet - why?\n", sc->unit);
|
|
ifp->if_ierrors++;
|
|
m_freem(m0);
|
|
return;
|
|
|
|
case IEEE80211_FC0_TYPE_CTL:
|
|
printf("ray%d: ray_rx got a CTL packet - why?\n", sc->unit);
|
|
ifp->if_ierrors++;
|
|
m_freem(m0);
|
|
return;
|
|
|
|
case IEEE80211_FC0_TYPE_DATA:
|
|
RAY_DPRINTFN(50, ("ray%d: ray_rx got a DATA packet\n",
|
|
sc->unit));
|
|
break;
|
|
|
|
default:
|
|
printf("ray%d: ray_rx got a unknown packet fc0 0x%x - why?\n",
|
|
sc->unit, fc);
|
|
ifp->if_ierrors++;
|
|
m_freem(m0);
|
|
return;
|
|
|
|
}
|
|
fc = header->i_fc[1];
|
|
src = header->i_addr2;
|
|
switch (fc & IEEE80211_FC1_DS_MASK) {
|
|
|
|
case IEEE80211_FC1_STA_TO_STA:
|
|
RAY_DPRINTFN(50, ("ray%d: ray_rx packet from sta %6D\n",
|
|
sc->unit, src, ":"));
|
|
break;
|
|
|
|
case IEEE80211_FC1_STA_TO_AP:
|
|
RAY_DPRINTFN(1, ("ray%d: ray_rx packet from sta to ap %6D %6D\n",
|
|
sc->unit, src, ":", header->i_addr3, ":"));
|
|
ifp->if_ierrors++;
|
|
m_freem(m0);
|
|
break;
|
|
|
|
case IEEE80211_FC1_AP_TO_STA:
|
|
RAY_DPRINTFN(1, ("ray%d: ray_rx packet from ap %6D\n",
|
|
sc->unit, src, ":"));
|
|
ifp->if_ierrors++;
|
|
m_freem(m0);
|
|
break;
|
|
|
|
case IEEE80211_FC1_AP_TO_AP:
|
|
RAY_DPRINTFN(1, ("ray%d: ray_rx packet between aps %6D %6D\n",
|
|
sc->unit, src, ":", header->i_addr2, ":"));
|
|
ifp->if_ierrors++;
|
|
m_freem(m0);
|
|
return;
|
|
|
|
default:
|
|
src = NULL;
|
|
printf("ray%d: ray_rx packet type unknown fc1 0x%x - why?\n",
|
|
sc->unit, fc);
|
|
ifp->if_ierrors++;
|
|
m_freem(m0);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Translation - capability as described earlier
|
|
*
|
|
* Each case must remove the 802.11 header and leave an 802.3
|
|
* header in the mbuf copy addresses as needed.
|
|
*/
|
|
switch (sc->translation) {
|
|
|
|
case SC_TRANSLATE_WEBGEAR:
|
|
/* Nice and easy - just trim the 802.11 header */
|
|
m_adj(m0, sizeof(struct ieee80211_header));
|
|
break;
|
|
|
|
default:
|
|
printf("ray%d: ray_rx unknown translation type 0x%x - why?\n",
|
|
sc->unit, sc->translation);
|
|
ifp->if_ierrors++;
|
|
m_freem(m0);
|
|
return;
|
|
|
|
}
|
|
|
|
/*
|
|
* Finally, do a bit of house keeping before sending the packet
|
|
* up the stack.
|
|
*/
|
|
ifp->if_ipackets++;
|
|
ray_rx_update_cache(sc, src, siglev, antenna);
|
|
#if NBPFILTER > 0
|
|
if (ifp->if_bpf)
|
|
bpf_mtap(ifp, m0);
|
|
#endif /* NBPFILTER */
|
|
#if XXX_PROM
|
|
if_wi.c - might be needed if we hear our own broadcasts in promiscuous mode
|
|
but will not be if we dont see them
|
|
if ((ifp->if_flags & IFF_PROMISC) &&
|
|
(bcmp(eh->ether_shost, sc->arpcom.ac_enaddr, ETHER_ADDR_LEN) &&
|
|
(eh->ether_dhost[0] & 1) == 0)
|
|
) {
|
|
m_freem(m0);
|
|
return;
|
|
}
|
|
#endif /* XXX_PROM */
|
|
eh = mtod(m0, struct ether_header *);
|
|
m_adj(m0, sizeof(struct ether_header));
|
|
ether_input(ifp, eh, m0);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Update rx level and antenna cache
|
|
*/
|
|
static void
|
|
ray_rx_update_cache(struct ray_softc *sc, u_int8_t *src, u_int8_t siglev, u_int8_t antenna)
|
|
{
|
|
int i, mini;
|
|
struct timeval mint;
|
|
struct ray_siglev *sl;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_rx_update_cache\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
/* try to find host */
|
|
for (i = 0; i < RAY_NSIGLEVRECS; i++) {
|
|
sl = &sc->sc_siglevs[i];
|
|
if (bcmp(sl->rsl_host, src, ETHER_ADDR_LEN) == 0)
|
|
goto found;
|
|
}
|
|
/* not found, find oldest slot */
|
|
mini = 0;
|
|
mint.tv_sec = LONG_MAX;
|
|
mint.tv_usec = 0;
|
|
for (i = 0; i < RAY_NSIGLEVRECS; i++) {
|
|
sl = &sc->sc_siglevs[i];
|
|
if (timevalcmp(&sl->rsl_time, &mint, <)) {
|
|
mini = i;
|
|
mint = sl->rsl_time;
|
|
}
|
|
}
|
|
sl = &sc->sc_siglevs[mini];
|
|
bzero(sl->rsl_siglevs, RAY_NSIGLEV);
|
|
bzero(sl->rsl_antennas, RAY_NANTENNA);
|
|
bcopy(src, sl->rsl_host, ETHER_ADDR_LEN);
|
|
|
|
found:
|
|
microtime(&sl->rsl_time);
|
|
bcopy(sl->rsl_siglevs, &sl->rsl_siglevs[1], RAY_NSIGLEV-1);
|
|
sl->rsl_siglevs[0] = siglev;
|
|
if (sc->sc_version != RAY_ECFS_BUILD_4) {
|
|
bcopy(sl->rsl_antennas, &sl->rsl_antennas[1], RAY_NANTENNA-1);
|
|
sl->rsl_antennas[0] = antenna;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* an update params command has completed lookup which command and
|
|
* the status
|
|
*
|
|
* XXX this isn't finished yet, we need to grok the command used
|
|
*/
|
|
static void
|
|
ray_update_params_done(struct ray_softc *sc, size_t ccs, u_int stat)
|
|
{
|
|
RAY_DPRINTFN(5, ("ray%d: ray_update_params_done\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
RAY_DPRINTFN(20, ("ray%d: ray_update_params_done stat %d\n",
|
|
sc->unit, stat));
|
|
|
|
/* this will get more complex as we add commands */
|
|
if (stat == RAY_CCS_STATUS_FAIL) {
|
|
printf("ray%d: failed to update a promisc\n", sc->unit);
|
|
/* XXX should probably reset */
|
|
/* rcmd = ray_reset; */
|
|
}
|
|
|
|
if (sc->sc_running & SCP_UPD_PROMISC) {
|
|
ray_cmd_done(sc, SCP_UPD_PROMISC);
|
|
sc->sc_promisc = SRAM_READ_1(sc, RAY_HOST_TO_ECF_BASE);
|
|
RAY_DPRINTFN(20, ("ray%d: new promisc value %d\n", sc->unit,
|
|
sc->sc_promisc));
|
|
} else if (sc->sc_updreq) {
|
|
ray_cmd_done(sc, SCP_UPD_UPDATEPARAMS);
|
|
/* get the update parameter */
|
|
sc->sc_updreq->r_failcause =
|
|
SRAM_READ_FIELD_1(sc, ccs, ray_cmd_update, c_failcause);
|
|
sc->sc_updreq = 0;
|
|
wakeup(ray_update_params);
|
|
ray_start_join_net(sc);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* check too see if we have any pending commands.
|
|
*/
|
|
static void
|
|
ray_check_scheduled(void *arg)
|
|
{
|
|
struct ray_softc *sc;
|
|
int s, i, mask;
|
|
|
|
s = splnet();
|
|
sc = arg;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_check_scheduled\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
RAY_DPRINTFN(20, (
|
|
"ray%d: ray_check_scheduled schd 0x%x running 0x%x ready %d\n",
|
|
sc->unit, sc->sc_scheduled, sc->sc_running, RAY_ECF_READY(sc)));
|
|
|
|
if (sc->sc_timoneed) {
|
|
untimeout(ray_check_scheduled, sc, sc->ccs_timerh);
|
|
sc->sc_timoneed = 0;
|
|
}
|
|
|
|
/* if update subcmd is running -- clear it in scheduled */
|
|
if (sc->sc_running & SCP_UPDATESUBCMD)
|
|
sc->sc_scheduled &= ~SCP_UPDATESUBCMD;
|
|
|
|
mask = SCP_FIRST;
|
|
for (i = 0; i < ray_ncmdtab; mask <<= 1, i++) {
|
|
if ((sc->sc_scheduled & ~SCP_UPD_MASK) == 0)
|
|
break;
|
|
if (!RAY_ECF_READY(sc))
|
|
break;
|
|
if (sc->sc_scheduled & mask)
|
|
(*ray_cmdtab[i])(sc);
|
|
}
|
|
|
|
RAY_DPRINTFN(20, (
|
|
"ray%d: ray_check_scheduled sched 0x%x running 0x%x ready %d\n",
|
|
sc->unit, sc->sc_scheduled, sc->sc_running, RAY_ECF_READY(sc)));
|
|
|
|
if (sc->sc_scheduled & ~SCP_UPD_MASK)
|
|
ray_set_pending(sc, sc->sc_scheduled);
|
|
|
|
splx(s);
|
|
}
|
|
|
|
/*
|
|
* check for unreported returns
|
|
*
|
|
* this routine is coded to only expect one outstanding request for the
|
|
* timed out requests at a time, but thats all that can be outstanding
|
|
* per hardware limitations
|
|
*/
|
|
static void
|
|
ray_check_ccs(void *arg)
|
|
{
|
|
struct ray_softc *sc;
|
|
u_int i, cmd, stat;
|
|
size_t ccs;
|
|
int s;
|
|
|
|
s = splnet();
|
|
sc = arg;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_check_ccs\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
ccs = 0;
|
|
stat = RAY_CCS_STATUS_FAIL;
|
|
sc->sc_timocheck = 0;
|
|
for (i = RAY_CCS_CMD_FIRST; i <= RAY_CCS_CMD_LAST; i++) {
|
|
if (!sc->sc_ccsinuse[i])
|
|
continue;
|
|
ccs = RAY_CCS_ADDRESS(i);
|
|
cmd = SRAM_READ_FIELD_1(sc, ccs, ray_cmd, c_cmd);
|
|
switch (cmd) {
|
|
case RAY_CMD_START_PARAMS:
|
|
case RAY_CMD_UPDATE_MCAST:
|
|
case RAY_CMD_UPDATE_PARAMS:
|
|
stat = SRAM_READ_FIELD_1(sc, ccs, ray_cmd, c_status);
|
|
RAY_DPRINTFN(20, ("ray%d: check ccs idx %d ccs 0x%x "
|
|
"cmd 0x%x stat %d\n", sc->unit, i,
|
|
ccs, cmd, stat));
|
|
goto breakout;
|
|
}
|
|
}
|
|
breakout:
|
|
/* see if we got one of the commands we are looking for */
|
|
if (i > RAY_CCS_CMD_LAST)
|
|
; /* nothign */
|
|
else if (stat == RAY_CCS_STATUS_FREE) {
|
|
stat = RAY_CCS_STATUS_COMPLETE;
|
|
ray_ccs_done(sc, ccs);
|
|
} else if (stat != RAY_CCS_STATUS_BUSY) {
|
|
if (sc->sc_ccsinuse[i] == 1) {
|
|
/* give a chance for the interrupt to occur */
|
|
sc->sc_ccsinuse[i] = 2;
|
|
if (!sc->sc_timocheck) {
|
|
sc->ccs_timerh = timeout(ray_check_ccs, sc, 1);
|
|
sc->sc_timocheck = 1;
|
|
}
|
|
} else
|
|
ray_ccs_done(sc, ccs);
|
|
} else {
|
|
sc->ccs_timerh = timeout(ray_check_ccs, sc, RAY_CCS_TIMEOUT);
|
|
sc->sc_timocheck = 1;
|
|
}
|
|
splx(s);
|
|
}
|
|
|
|
/*
|
|
* read the counters, the card implements the following protocol
|
|
* to keep the values from being changed while read: It checks
|
|
* the `own' bit and if zero writes the current internal counter
|
|
* value, it then sets the `own' bit to 1. If the `own' bit was 1 it
|
|
* incremenets its internal counter. The user thus reads the counter
|
|
* if the `own' bit is one and then sets the own bit to 0.
|
|
*/
|
|
static void
|
|
ray_update_error_counters(struct ray_softc *sc)
|
|
{
|
|
size_t csc;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_update_error_counters\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
/* try and update the error counters */
|
|
csc = RAY_STATUS_BASE;
|
|
if (SRAM_READ_FIELD_1(sc, csc, ray_csc, csc_mrxo_own)) {
|
|
sc->sc_rxoverflow +=
|
|
SRAM_READ_FIELD_2(sc, csc, ray_csc, csc_mrx_overflow);
|
|
SRAM_WRITE_FIELD_1(sc, csc, ray_csc, csc_mrxo_own, 0);
|
|
}
|
|
if (SRAM_READ_FIELD_1(sc, csc, ray_csc, csc_mrxc_own)) {
|
|
sc->sc_rxcksum +=
|
|
SRAM_READ_FIELD_2(sc, csc, ray_csc, csc_mrx_overflow);
|
|
SRAM_WRITE_FIELD_1(sc, csc, ray_csc, csc_mrxc_own, 0);
|
|
}
|
|
if (SRAM_READ_FIELD_1(sc, csc, ray_csc, csc_rxhc_own)) {
|
|
sc->sc_rxhcksum +=
|
|
SRAM_READ_FIELD_2(sc, csc, ray_csc, csc_rx_hcksum);
|
|
SRAM_WRITE_FIELD_1(sc, csc, ray_csc, csc_rxhc_own, 0);
|
|
}
|
|
sc->sc_rxnoise = SRAM_READ_FIELD_1(sc, csc, ray_csc, csc_rx_noise);
|
|
}
|
|
|
|
/*
|
|
* Process CCS command completion - called from ray_intr
|
|
*/
|
|
static void
|
|
ray_ccs_done(struct ray_softc *sc, size_t ccs)
|
|
{
|
|
u_int cmd, stat;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_ccs_done\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
cmd = SRAM_READ_FIELD_1(sc, ccs, ray_cmd, c_cmd);
|
|
stat = SRAM_READ_FIELD_1(sc, ccs, ray_cmd, c_status);
|
|
|
|
RAY_DPRINTFN(20, ("ray%d: ccs idx %d ccs 0x%x cmd 0x%x status %d\n",
|
|
sc->unit, RAY_CCS_INDEX(ccs), ccs, cmd, stat));
|
|
|
|
switch (cmd) {
|
|
|
|
case RAY_CMD_START_PARAMS:
|
|
RAY_DPRINTFN(20, ("ray%d: ray_ccs_done got START_PARAMS\n",
|
|
sc->unit));
|
|
ray_download_done(sc);
|
|
break;
|
|
|
|
case RAY_CMD_UPDATE_PARAMS:
|
|
RAY_DPRINTFN(20, ("ray%d: ray_ccs_done got UPDATE_PARAMS\n",
|
|
sc->unit));
|
|
ray_update_params_done(sc, ccs, stat);
|
|
break;
|
|
|
|
case RAY_CMD_REPORT_PARAMS:
|
|
RAY_DPRINTFN(20, ("ray%d: ray_ccs_done got REPORT_PARAMS\n",
|
|
sc->unit));
|
|
/* get the reported parameters */
|
|
ray_cmd_done(sc, SCP_REPORTPARAMS);
|
|
if (!sc->sc_repreq)
|
|
break;
|
|
sc->sc_repreq->r_failcause =
|
|
SRAM_READ_FIELD_1(sc, ccs, ray_cmd_report, c_failcause);
|
|
sc->sc_repreq->r_len =
|
|
SRAM_READ_FIELD_1(sc, ccs, ray_cmd_report, c_len);
|
|
ray_read_region(sc, RAY_ECF_TO_HOST_BASE, sc->sc_repreq->r_data,
|
|
sc->sc_repreq->r_len);
|
|
sc->sc_repreq = 0;
|
|
wakeup(ray_report_params);
|
|
break;
|
|
|
|
case RAY_CMD_UPDATE_MCAST:
|
|
RAY_DPRINTFN(20, ("ray%d: ray_ccs_done got UPDATE_MCAST\n",
|
|
sc->unit));
|
|
ray_cmd_done(sc, SCP_UPD_MCAST);
|
|
if (stat == RAY_CCS_STATUS_FAIL)
|
|
ray_reset(sc);
|
|
break;
|
|
|
|
case RAY_CMD_START_NET:
|
|
case RAY_CMD_JOIN_NET:
|
|
RAY_DPRINTFN(20, ("ray%d: ray_ccs_done got START|JOIN_NET\n",
|
|
sc->unit));
|
|
ray_start_join_done(sc, ccs, stat);
|
|
break;
|
|
|
|
case RAY_CMD_TX_REQ:
|
|
RAY_DPRINTFN(20, ("ray%d: ray_ccs_done got TX_REQ\n",
|
|
sc->unit));
|
|
ray_start_done(sc, ccs, stat);
|
|
goto done;
|
|
|
|
case RAY_CMD_START_ASSOC:
|
|
RAY_DPRINTFN(20, ("ray%d: ray_ccs_done got START_ASSOC\n",
|
|
sc->unit));
|
|
ray_cmd_done(sc, SCP_STARTASSOC);
|
|
if (stat == RAY_CCS_STATUS_FAIL)
|
|
ray_start_join_net(sc); /* XXX check */
|
|
else {
|
|
sc->sc_havenet = 1;
|
|
}
|
|
break;
|
|
|
|
case RAY_CMD_UPDATE_APM:
|
|
RAY_DPRINTFN(20, ("ray%d: ray_ccs_done got UPDATE_APM\n",
|
|
sc->unit));
|
|
XXX;
|
|
break;
|
|
|
|
case RAY_CMD_TEST_MEM:
|
|
printf("ray%d: ray_ccs_done got TEST_MEM - why?\n", sc->unit);
|
|
break;
|
|
|
|
case RAY_CMD_SHUTDOWN:
|
|
printf("ray%d: ray_ccs_done got SHUTDOWN - why?\n", sc->unit);
|
|
break;
|
|
|
|
case RAY_CMD_DUMP_MEM:
|
|
printf("ray%d: ray_ccs_done got DUMP_MEM - why?\n", sc->unit);
|
|
break;
|
|
|
|
case RAY_CMD_START_TIMER:
|
|
printf("ray%d: ray_ccs_done got START_TIMER - why?\n",
|
|
sc->unit);
|
|
break;
|
|
|
|
default:
|
|
printf("ray%d: ray_ccs_done unknown command 0x%x\n",
|
|
sc->unit, cmd);
|
|
break;
|
|
}
|
|
|
|
ray_free_ccs(sc, ccs);
|
|
done:
|
|
/*
|
|
* see if needed things can be done now that a command
|
|
* has completed
|
|
*/
|
|
ray_check_scheduled(sc);
|
|
}
|
|
|
|
/*
|
|
* Process ECF command request - called from ray_intr
|
|
*/
|
|
static void
|
|
ray_rcs_intr(struct ray_softc *sc, size_t rcs)
|
|
{
|
|
struct ifnet *ifp;
|
|
u_int cmd, status;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_rcs_intr\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
cmd = SRAM_READ_FIELD_1(sc, rcs, ray_cmd, c_cmd);
|
|
status = SRAM_READ_FIELD_1(sc, rcs, ray_cmd, c_status);
|
|
RAY_DPRINTFN(20, ("ray%d: rcs idx %d rcs 0x%x cmd 0x%x status %d\n",
|
|
sc->unit, RAY_CCS_INDEX(rcs), rcs, cmd, status));
|
|
|
|
switch (cmd) {
|
|
|
|
case RAY_ECMD_RX_DONE:
|
|
RAY_DPRINTFN(20, ("ray%d: ray_rcs_intr got RX_DONE\n",
|
|
sc->unit));
|
|
ray_rx(sc, rcs);
|
|
break;
|
|
|
|
case RAY_ECMD_REJOIN_DONE:
|
|
RAY_DPRINTFN(20, ("ray%d: ray_rcs_intr got REJOIN_DONE\n",
|
|
sc->unit));
|
|
sc->sc_havenet = 1; /* Should not be here but in function */
|
|
XXX;
|
|
break;
|
|
|
|
case RAY_ECMD_ROAM_START:
|
|
RAY_DPRINTFN(20, ("ray%d: ray_rcs_intr got ROAM_START\n",
|
|
sc->unit));
|
|
sc->sc_havenet = 0; /* Should not be here but in function */
|
|
XXX;
|
|
break;
|
|
|
|
case RAY_ECMD_JAPAN_CALL_SIGNAL:
|
|
printf("ray%d: ray_rcs_intr got JAPAN_CALL_SIGNAL - why?\n",
|
|
sc->unit);
|
|
break;
|
|
|
|
default:
|
|
printf("ray%d: ray_rcs_intr unknown command 0x%x\n",
|
|
sc->unit, cmd);
|
|
break;
|
|
}
|
|
|
|
RAY_CCS_FREE(sc, rcs);
|
|
}
|
|
|
|
/*
|
|
* process an interrupt
|
|
*/
|
|
static int
|
|
ray_intr(struct pccard_devinfo *dev_p)
|
|
{
|
|
struct ray_softc *sc;
|
|
struct ifnet *ifp;
|
|
int i, count;
|
|
|
|
sc = &ray_softc[dev_p->isahd.id_unit];
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_intr\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
if (sc->gone) {
|
|
printf("ray%d: unloaded before interrupt!\n", sc->unit);
|
|
return (0);
|
|
}
|
|
|
|
if ((++sc->sc_checkcounters % 32) == 0)
|
|
ray_update_error_counters(sc);
|
|
|
|
/*
|
|
* Check that the interrupt was for us, if so get the rcs/ccs
|
|
* and vector on the command contained within it.
|
|
*/
|
|
if (!RAY_HCS_INTR(sc))
|
|
count = 0;
|
|
else {
|
|
count = 1;
|
|
i = SRAM_READ_1(sc, RAY_SCB_RCSI);
|
|
if (i <= RAY_CCS_LAST)
|
|
ray_ccs_done(sc, RAY_CCS_ADDRESS(i));
|
|
else if (i <= RAY_RCS_LAST)
|
|
ray_rcs_intr(sc, RAY_CCS_ADDRESS(i));
|
|
else
|
|
printf("ray%d: ray_intr bad ccs index %d\n", sc->unit, i);
|
|
}
|
|
|
|
if (count)
|
|
RAY_HCS_CLEAR_INTR(sc);
|
|
|
|
RAY_DPRINTFN(10, ("ray%d: interrupt %s handled\n",
|
|
sc->unit, count?"was":"not"));
|
|
|
|
/* Send any packets lying around */
|
|
if (!(ifp->if_flags & IFF_OACTIVE) && (ifp->if_snd.ifq_head != NULL))
|
|
ray_start(ifp);
|
|
|
|
return (count);
|
|
}
|
|
|
|
/*
|
|
* Generic CCS handling
|
|
*/
|
|
|
|
#if XXX_NETBSDTX
|
|
/*
|
|
* free the chain of descriptors -- used for freeing allocated tx chains
|
|
*/
|
|
static void
|
|
ray_free_ccs_chain(struct ray_softc *sc, u_int ni)
|
|
{
|
|
u_int i;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_free_ccs_chain\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
while ((i = ni) != RAY_CCS_LINK_NULL) {
|
|
ni = SRAM_READ_FIELD_1(sc, RAY_CCS_ADDRESS(i), ray_cmd, c_link);
|
|
RAY_CCS_FREE(sc, RAY_CCS_ADDRESS(i));
|
|
}
|
|
}
|
|
#endif XXX_NETBSDTX
|
|
|
|
/*
|
|
* free up a cmd and return the old status.
|
|
* this routine is only used for commands.
|
|
*/
|
|
static u_int8_t
|
|
ray_free_ccs(struct ray_softc *sc, size_t ccs)
|
|
{
|
|
u_int8_t stat;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_free_ccs\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
stat = SRAM_READ_FIELD_1(sc, ccs, ray_cmd, c_status);
|
|
RAY_CCS_FREE(sc, ccs);
|
|
if (ccs <= RAY_CCS_ADDRESS(RAY_CCS_LAST))
|
|
sc->sc_ccsinuse[RAY_CCS_INDEX(ccs)] = 0;
|
|
RAY_DPRINTFN(20, ("ray%d: ray_free_ccs freed 0x%02x\n",
|
|
sc->unit, RAY_CCS_INDEX(ccs)));
|
|
|
|
return (stat);
|
|
}
|
|
|
|
/*
|
|
* Obtain a free ccs buffer.
|
|
*
|
|
* returns 1 and in `ccsp' the bus offset of the free ccs
|
|
* or 0 if none are free
|
|
*
|
|
* If `track' is not zero, handles tracking this command
|
|
* possibly indicating a callback is needed and setting a timeout
|
|
* also if ECF isn't ready we terminate earlier to avoid overhead.
|
|
*
|
|
* this routine is only used for commands
|
|
*/
|
|
static int
|
|
ray_alloc_ccs(struct ray_softc *sc, size_t *ccsp, u_int cmd, u_int track)
|
|
{
|
|
size_t ccs;
|
|
u_int i;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_alloc_ccs\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
/* for tracked commands, if not ready just set pending */
|
|
if (track && !RAY_ECF_READY(sc)) {
|
|
ray_cmd_schedule(sc, track);
|
|
return (0);
|
|
}
|
|
|
|
for (i = RAY_CCS_CMD_FIRST; i <= RAY_CCS_CMD_LAST; i++) {
|
|
/* probe here to make the card go */
|
|
(void)SRAM_READ_FIELD_1(sc, RAY_CCS_ADDRESS(i), ray_cmd,
|
|
c_status);
|
|
if (!sc->sc_ccsinuse[i])
|
|
break;
|
|
}
|
|
if (i > RAY_CCS_CMD_LAST) {
|
|
if (track)
|
|
ray_cmd_schedule(sc, track);
|
|
return (0);
|
|
}
|
|
sc->sc_ccsinuse[i] = 1;
|
|
ccs = RAY_CCS_ADDRESS(i);
|
|
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd, c_status, RAY_CCS_STATUS_BUSY);
|
|
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd, c_cmd, cmd);
|
|
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd, c_link, RAY_CCS_LINK_NULL);
|
|
|
|
*ccsp = ccs;
|
|
return (1);
|
|
}
|
|
|
|
/*
|
|
* this function sets the pending bit for the command given in 'need'
|
|
* and schedules a timeout if none is scheduled already. Any command
|
|
* that uses the `host to ecf' region must be serialized.
|
|
*/
|
|
static void
|
|
ray_set_pending(struct ray_softc *sc, u_int cmdf)
|
|
{
|
|
RAY_DPRINTFN(5, ("ray%d: ray_set_pending\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
RAY_DPRINTFN(20, ("ray%d: ray_set_pending 0x%0x\n", sc->unit, cmdf));
|
|
|
|
sc->sc_scheduled |= cmdf;
|
|
if (!sc->sc_timoneed) {
|
|
RAY_DPRINTFN(20, ("ray%d: ray_set_pending new timo\n",
|
|
sc->unit));
|
|
sc->ccs_timerh = timeout(ray_check_scheduled, sc,
|
|
RAY_CHECK_SCHED_TIMEOUT);
|
|
sc->sc_timoneed = 1;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* schedule the `cmdf' for completion later
|
|
*/
|
|
static void
|
|
ray_cmd_schedule(struct ray_softc *sc, int cmdf)
|
|
{
|
|
int track;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_cmd_schedule\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
RAY_DPRINTFN(20, ("ray%d: ray_cmd_schedule 0x%x\n", sc->unit, cmdf));
|
|
|
|
track = cmdf;
|
|
if ((cmdf & SCP_UPD_MASK) == 0)
|
|
ray_set_pending(sc, track);
|
|
else if (ray_cmd_is_running(sc, SCP_UPDATESUBCMD)) {
|
|
/* don't do timeout mechaniscm if subcmd already going */
|
|
sc->sc_scheduled |= cmdf;
|
|
} else
|
|
ray_set_pending(sc, cmdf | SCP_UPDATESUBCMD);
|
|
}
|
|
|
|
/*
|
|
* check to see if `cmdf' has been scheduled
|
|
*/
|
|
static int
|
|
ray_cmd_is_scheduled(struct ray_softc *sc, int cmdf)
|
|
{
|
|
RAY_DPRINTFN(5, ("ray%d: ray_cmd_is_scheduled\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
RAY_DPRINTFN(20, ("ray%d: ray_cmd_is_scheduled 0x%x\n",
|
|
sc->unit, cmdf));
|
|
|
|
return ((sc->sc_scheduled & cmdf) ? 1 : 0);
|
|
}
|
|
|
|
/*
|
|
* cancel a scheduled command (not a running one though!)
|
|
*/
|
|
static void
|
|
ray_cmd_cancel(struct ray_softc *sc, int cmdf)
|
|
{
|
|
RAY_DPRINTFN(5, ("ray%d: ray_cmd_cancel\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
RAY_DPRINTFN(20, ("ray%d: ray_cmd_cancel 0x%x\n", sc->unit, cmdf));
|
|
|
|
sc->sc_scheduled &= ~cmdf;
|
|
if ((cmdf & SCP_UPD_MASK) && (sc->sc_scheduled & SCP_UPD_MASK) == 0)
|
|
sc->sc_scheduled &= ~SCP_UPDATESUBCMD;
|
|
|
|
/* if nothing else needed cancel the timer */
|
|
if (sc->sc_scheduled == 0 && sc->sc_timoneed) {
|
|
untimeout(ray_check_scheduled, sc, sc->ccs_timerh);
|
|
sc->sc_timoneed = 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* called to indicate the 'cmdf' has been issued
|
|
*/
|
|
static void
|
|
ray_cmd_ran(struct ray_softc *sc, int cmdf)
|
|
{
|
|
RAY_DPRINTFN(5, ("ray%d: ray_cmd_ran\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
RAY_DPRINTFN(20, ("ray%d: ray_cmd_ran 0x%x\n", sc->unit, cmdf));
|
|
|
|
if (cmdf & SCP_UPD_MASK)
|
|
sc->sc_running |= cmdf | SCP_UPDATESUBCMD;
|
|
else
|
|
sc->sc_running |= cmdf;
|
|
|
|
if ((cmdf & SCP_TIMOCHECK_CMD_MASK) && !sc->sc_timocheck) {
|
|
sc->ccs_timerh = timeout(ray_check_ccs, sc, RAY_CCS_TIMEOUT);
|
|
sc->sc_timocheck = 1;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* check to see if `cmdf' has been issued
|
|
*/
|
|
static int
|
|
ray_cmd_is_running(struct ray_softc *sc, int cmdf)
|
|
{
|
|
RAY_DPRINTFN(5, ("ray%d: ray_cmd_is_running\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
RAY_DPRINTFN(20, ("ray%d: ray_cmd_is_running 0x%x\n", sc->unit, cmdf));
|
|
|
|
return ((sc->sc_running & cmdf) ? 1 : 0);
|
|
}
|
|
|
|
/*
|
|
* the given `cmdf' that was issued has completed
|
|
*/
|
|
static void
|
|
ray_cmd_done(struct ray_softc *sc, int cmdf)
|
|
{
|
|
RAY_DPRINTFN(5, ("ray%d: ray_cmd_done\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
RAY_DPRINTFN(20, ("ray%d: ray_cmd_done 0x%x\n", sc->unit, cmdf));
|
|
|
|
sc->sc_running &= ~cmdf;
|
|
if (cmdf & SCP_UPD_MASK) {
|
|
sc->sc_running &= ~SCP_UPDATESUBCMD;
|
|
if (sc->sc_scheduled & SCP_UPD_MASK)
|
|
ray_cmd_schedule(sc, sc->sc_scheduled & SCP_UPD_MASK);
|
|
}
|
|
if ((sc->sc_running & SCP_TIMOCHECK_CMD_MASK) == 0 && sc->sc_timocheck){
|
|
untimeout(ray_check_ccs, sc, sc->ccs_timerh);
|
|
sc->sc_timocheck = 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* issue the command
|
|
* only used for commands not tx
|
|
*/
|
|
static int
|
|
ray_issue_cmd(struct ray_softc *sc, size_t ccs, u_int track)
|
|
{
|
|
u_int i;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_cmd_issue\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
/*
|
|
* XXX other drivers did this, but I think
|
|
* what we really want to do is just make sure we don't
|
|
* get here or that spinning is ok
|
|
*/
|
|
i = 0;
|
|
while (!RAY_ECF_READY(sc))
|
|
if (++i > 50) {
|
|
printf("\n");
|
|
(void)ray_free_ccs(sc, ccs);
|
|
if (track)
|
|
ray_cmd_schedule(sc, track);
|
|
return (0);
|
|
} else if (i == 1)
|
|
printf("ray%d: ray_issue_cmd spinning", sc->unit);
|
|
else
|
|
printf(".");
|
|
|
|
SRAM_WRITE_1(sc, RAY_SCB_CCSI, RAY_CCS_INDEX(ccs));
|
|
RAY_ECF_START_CMD(sc);
|
|
ray_cmd_ran(sc, track);
|
|
|
|
return (1);
|
|
}
|
|
|
|
/*
|
|
* send a simple command if we can
|
|
*/
|
|
static int
|
|
ray_simple_cmd(struct ray_softc *sc, u_int cmd, u_int track)
|
|
{
|
|
size_t ccs;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_simple_cmd\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
return (ray_alloc_ccs(sc, &ccs, cmd, track) &&
|
|
ray_issue_cmd(sc, ccs, track));
|
|
}
|
|
|
|
/*
|
|
* Functions based on CCS commands
|
|
*/
|
|
|
|
/*
|
|
* run a update subcommand
|
|
*/
|
|
static void
|
|
ray_update_subcmd(struct ray_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
int submask, i;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_update_subcmd\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
ray_cmd_cancel(sc, SCP_UPDATESUBCMD);
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
if ((ifp->if_flags & IFF_RUNNING) == 0)
|
|
return;
|
|
submask = SCP_UPD_FIRST;
|
|
for (i = 0; i < ray_nsubcmdtab; submask <<= 1, i++) {
|
|
if ((sc->sc_scheduled & SCP_UPD_MASK) == 0)
|
|
break;
|
|
/* when done the next command will be scheduled */
|
|
if (ray_cmd_is_running(sc, SCP_UPDATESUBCMD))
|
|
break;
|
|
if (!RAY_ECF_READY(sc))
|
|
break;
|
|
/*
|
|
* give priority to LSB -- e.g., if previous loop reschuled
|
|
* doing this command after calling the function won't catch
|
|
* if a later command sets an earlier bit
|
|
*/
|
|
if (sc->sc_scheduled & ((submask - 1) & SCP_UPD_MASK))
|
|
break;
|
|
if (sc->sc_scheduled & submask)
|
|
(*ray_subcmdtab[i])(sc);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* report a parameter
|
|
*/
|
|
static void
|
|
ray_report_params(struct ray_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
size_t ccs;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_report_params\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
ray_cmd_cancel(sc, SCP_REPORTPARAMS);
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
if (!sc->sc_repreq)
|
|
return;
|
|
|
|
/* do the issue check before equality check */
|
|
if ((ifp->if_flags & IFF_RUNNING) == 0)
|
|
return;
|
|
else if (ray_cmd_is_running(sc, SCP_REPORTPARAMS)) {
|
|
ray_cmd_schedule(sc, SCP_REPORTPARAMS);
|
|
return;
|
|
} else if (!ray_alloc_ccs(sc, &ccs, RAY_CMD_REPORT_PARAMS,
|
|
SCP_REPORTPARAMS))
|
|
return;
|
|
|
|
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd_report, c_paramid,
|
|
sc->sc_repreq->r_paramid);
|
|
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd_report, c_nparam, 1);
|
|
(void)ray_issue_cmd(sc, ccs, SCP_REPORTPARAMS);
|
|
}
|
|
|
|
/*
|
|
* start an association
|
|
*/
|
|
static void
|
|
ray_start_assoc(struct ray_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_start_assoc\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
ray_cmd_cancel(sc, SCP_STARTASSOC);
|
|
if ((ifp->if_flags & IFF_RUNNING) == 0)
|
|
return;
|
|
else if (ray_cmd_is_running(sc, SCP_STARTASSOC))
|
|
return;
|
|
(void)ray_simple_cmd(sc, RAY_CMD_START_ASSOC, SCP_STARTASSOC);
|
|
}
|
|
|
|
/*
|
|
* Subcommand functions that use the SCP_UPDATESUBCMD command
|
|
* (and are serialized with respect to other update sub commands
|
|
*/
|
|
|
|
/*
|
|
* Download start up structures to card.
|
|
*
|
|
* Part of ray_init, download, startjoin control flow.
|
|
*/
|
|
static void
|
|
ray_download_params(struct ray_softc *sc)
|
|
{
|
|
struct ray_mib_4 ray_mib_4_default;
|
|
struct ray_mib_5 ray_mib_5_default;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: Downloading startup parameters\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
ray_cmd_cancel(sc, SCP_UPD_STARTUP);
|
|
|
|
#define MIB4(m) ray_mib_4_default.##m
|
|
#define MIB5(m) ray_mib_5_default.##m
|
|
#define PUT2(p, v) \
|
|
do { (p)[0] = ((v >> 8) & 0xff); (p)[1] = (v & 0xff); } while(0)
|
|
|
|
/*
|
|
* Firmware version 4 defaults - see if_raymib.h for details
|
|
*/
|
|
MIB4(mib_net_type) = sc->sc_d.np_net_type;
|
|
MIB4(mib_ap_status) = sc->sc_d.np_ap_status;
|
|
bcopy(sc->sc_d.np_ssid, MIB4(mib_ssid), IEEE80211_NWID_LEN);
|
|
MIB4(mib_scan_mode) = RAY_MIB_SCAN_MODE_DEFAULT;
|
|
MIB4(mib_apm_mode) = RAY_MIB_APM_MODE_DEFAULT;
|
|
bcopy(sc->sc_station_addr, MIB4(mib_mac_addr), ETHER_ADDR_LEN);
|
|
PUT2(MIB4(mib_frag_thresh), RAY_MIB_FRAG_THRESH_DEFAULT);
|
|
PUT2(MIB4(mib_dwell_time), RAY_MIB_DWELL_TIME_V4);
|
|
PUT2(MIB4(mib_beacon_period), RAY_MIB_BEACON_PERIOD_V4);
|
|
MIB4(mib_dtim_interval) = RAY_MIB_DTIM_INTERVAL_DEFAULT;
|
|
MIB4(mib_max_retry) = RAY_MIB_MAX_RETRY_DEFAULT;
|
|
MIB4(mib_ack_timo) = RAY_MIB_ACK_TIMO_DEFAULT;
|
|
MIB4(mib_sifs) = RAY_MIB_SIFS_DEFAULT;
|
|
MIB4(mib_difs) = RAY_MIB_DIFS_DEFAULT;
|
|
MIB4(mib_pifs) = RAY_MIB_PIFS_V4;
|
|
PUT2(MIB4(mib_rts_thresh), RAY_MIB_RTS_THRESH_DEFAULT);
|
|
PUT2(MIB4(mib_scan_dwell), RAY_MIB_SCAN_DWELL_V4);
|
|
PUT2(MIB4(mib_scan_max_dwell), RAY_MIB_SCAN_MAX_DWELL_V4);
|
|
MIB4(mib_assoc_timo) = RAY_MIB_ASSOC_TIMO_DEFAULT;
|
|
MIB4(mib_adhoc_scan_cycle) = RAY_MIB_ADHOC_SCAN_CYCLE_DEFAULT;
|
|
MIB4(mib_infra_scan_cycle) = RAY_MIB_INFRA_SCAN_CYCLE_DEFAULT;
|
|
MIB4(mib_infra_super_scan_cycle) = RAY_MIB_INFRA_SUPER_SCAN_CYCLE_DEFAULT;
|
|
MIB4(mib_promisc) = RAY_MIB_PROMISC_DEFAULT;
|
|
PUT2(MIB4(mib_uniq_word), RAY_MIB_UNIQ_WORD_DEFAULT);
|
|
MIB4(mib_slot_time) = RAY_MIB_SLOT_TIME_V4;
|
|
MIB4(mib_roam_low_snr_thresh) = RAY_MIB_ROAM_LOW_SNR_THRESH_DEFAULT;
|
|
MIB4(mib_low_snr_count) = RAY_MIB_LOW_SNR_COUNT_DEFAULT;
|
|
MIB4(mib_infra_missed_beacon_count)= RAY_MIB_INFRA_MISSED_BEACON_COUNT_DEFAULT;
|
|
MIB4(mib_adhoc_missed_beacon_count)= RAY_MIB_ADHOC_MISSED_BEACON_COUNT_DEFAULT;
|
|
MIB4(mib_country_code) = RAY_MIB_COUNTRY_CODE_DEFAULT;
|
|
MIB4(mib_hop_seq) = RAY_MIB_HOP_SEQ_DEFAULT;
|
|
MIB4(mib_hop_seq_len) = RAY_MIB_HOP_SEQ_LEN_V4;
|
|
MIB4(mib_cw_max) = RAY_MIB_CW_MAX_V4;
|
|
MIB4(mib_cw_min) = RAY_MIB_CW_MIN_V4;
|
|
MIB4(mib_noise_filter_gain) = RAY_MIB_NOISE_FILTER_GAIN_DEFAULT;
|
|
MIB4(mib_noise_limit_offset) = RAY_MIB_NOISE_LIMIT_OFFSET_DEFAULT;
|
|
MIB4(mib_rssi_thresh_offset) = RAY_MIB_RSSI_THRESH_OFFSET_DEFAULT;
|
|
MIB4(mib_busy_thresh_offset) = RAY_MIB_BUSY_THRESH_OFFSET_DEFAULT;
|
|
MIB4(mib_sync_thresh) = RAY_MIB_SYNC_THRESH_DEFAULT;
|
|
MIB4(mib_test_mode) = RAY_MIB_TEST_MODE_DEFAULT;
|
|
MIB4(mib_test_min_chan) = RAY_MIB_TEST_MIN_CHAN_DEFAULT;
|
|
MIB4(mib_test_max_chan) = RAY_MIB_TEST_MAX_CHAN_DEFAULT;
|
|
|
|
/*
|
|
* Firmware version 5 defaults - see if_raymib.h for details
|
|
*/
|
|
MIB5(mib_net_type) = sc->sc_d.np_net_type;
|
|
MIB4(mib_ap_status) = sc->sc_d.np_ap_status;
|
|
bcopy(sc->sc_d.np_ssid, MIB5(mib_ssid), IEEE80211_NWID_LEN);
|
|
MIB5(mib_scan_mode) = RAY_MIB_SCAN_MODE_DEFAULT;
|
|
MIB5(mib_apm_mode) = RAY_MIB_APM_MODE_DEFAULT;
|
|
bcopy(sc->sc_station_addr, MIB5(mib_mac_addr), ETHER_ADDR_LEN);
|
|
PUT2(MIB5(mib_frag_thresh), RAY_MIB_FRAG_THRESH_DEFAULT);
|
|
PUT2(MIB5(mib_dwell_time), RAY_MIB_DWELL_TIME_V5);
|
|
PUT2(MIB5(mib_beacon_period), RAY_MIB_BEACON_PERIOD_V5);
|
|
MIB5(mib_dtim_interval) = RAY_MIB_DTIM_INTERVAL_DEFAULT;
|
|
MIB5(mib_max_retry) = RAY_MIB_MAX_RETRY_DEFAULT;
|
|
MIB5(mib_ack_timo) = RAY_MIB_ACK_TIMO_DEFAULT;
|
|
MIB5(mib_sifs) = RAY_MIB_SIFS_DEFAULT;
|
|
MIB5(mib_difs) = RAY_MIB_DIFS_DEFAULT;
|
|
MIB5(mib_pifs) = RAY_MIB_PIFS_V5;
|
|
PUT2(MIB5(mib_rts_thresh), RAY_MIB_RTS_THRESH_DEFAULT);
|
|
PUT2(MIB5(mib_scan_dwell), RAY_MIB_SCAN_DWELL_V5);
|
|
PUT2(MIB5(mib_scan_max_dwell), RAY_MIB_SCAN_MAX_DWELL_V5);
|
|
MIB5(mib_assoc_timo) = RAY_MIB_ASSOC_TIMO_DEFAULT;
|
|
MIB5(mib_adhoc_scan_cycle) = RAY_MIB_ADHOC_SCAN_CYCLE_DEFAULT;
|
|
MIB5(mib_infra_scan_cycle) = RAY_MIB_INFRA_SCAN_CYCLE_DEFAULT;
|
|
MIB5(mib_infra_super_scan_cycle) = RAY_MIB_INFRA_SUPER_SCAN_CYCLE_DEFAULT;
|
|
MIB5(mib_promisc) = RAY_MIB_PROMISC_DEFAULT;
|
|
PUT2(MIB5(mib_uniq_word), RAY_MIB_UNIQ_WORD_DEFAULT);
|
|
MIB5(mib_slot_time) = RAY_MIB_SLOT_TIME_V5;
|
|
MIB5(mib_roam_low_snr_thresh) = RAY_MIB_ROAM_LOW_SNR_THRESH_DEFAULT;
|
|
MIB5(mib_low_snr_count) = RAY_MIB_LOW_SNR_COUNT_DEFAULT;
|
|
MIB5(mib_infra_missed_beacon_count)= RAY_MIB_INFRA_MISSED_BEACON_COUNT_DEFAULT;
|
|
MIB5(mib_adhoc_missed_beacon_count)= RAY_MIB_ADHOC_MISSED_BEACON_COUNT_DEFAULT;
|
|
MIB5(mib_country_code) = RAY_MIB_COUNTRY_CODE_DEFAULT;
|
|
MIB5(mib_hop_seq) = RAY_MIB_HOP_SEQ_DEFAULT;
|
|
MIB5(mib_hop_seq_len) = RAY_MIB_HOP_SEQ_LEN_V5;
|
|
PUT2(MIB5(mib_cw_max), RAY_MIB_CW_MAX_V5);
|
|
PUT2(MIB5(mib_cw_min), RAY_MIB_CW_MIN_V5);
|
|
MIB5(mib_noise_filter_gain) = RAY_MIB_NOISE_FILTER_GAIN_DEFAULT;
|
|
MIB5(mib_noise_limit_offset) = RAY_MIB_NOISE_LIMIT_OFFSET_DEFAULT;
|
|
MIB5(mib_rssi_thresh_offset) = RAY_MIB_RSSI_THRESH_OFFSET_DEFAULT;
|
|
MIB5(mib_busy_thresh_offset) = RAY_MIB_BUSY_THRESH_OFFSET_DEFAULT;
|
|
MIB5(mib_sync_thresh) = RAY_MIB_SYNC_THRESH_DEFAULT;
|
|
MIB5(mib_test_mode) = RAY_MIB_TEST_MODE_DEFAULT;
|
|
MIB5(mib_test_min_chan) = RAY_MIB_TEST_MIN_CHAN_DEFAULT;
|
|
MIB5(mib_test_max_chan) = RAY_MIB_TEST_MAX_CHAN_DEFAULT;
|
|
MIB5(mib_allow_probe_resp) = RAY_MIB_ALLOW_PROBE_RESP_DEFAULT;
|
|
MIB5(mib_privacy_must_start) = sc->sc_d.np_priv_start;
|
|
MIB5(mib_privacy_can_join) = sc->sc_d.np_priv_join;
|
|
MIB5(mib_basic_rate_set[0]) = sc->sc_d.np_def_txrate;
|
|
|
|
if (!RAY_ECF_READY(sc)) {
|
|
printf("ray%d: ray_download_params device busy\n",
|
|
sc->unit);
|
|
ray_reset(sc);
|
|
}
|
|
|
|
if (sc->sc_version == RAY_ECFS_BUILD_4)
|
|
ray_write_region(sc, RAY_HOST_TO_ECF_BASE,
|
|
&ray_mib_4_default, sizeof(ray_mib_4_default));
|
|
else
|
|
ray_write_region(sc, RAY_HOST_TO_ECF_BASE,
|
|
&ray_mib_5_default, sizeof(ray_mib_5_default));
|
|
|
|
if (!ray_simple_cmd(sc, RAY_CMD_START_PARAMS, SCP_UPD_STARTUP))
|
|
printf("ray%d: ray_download_params can't issue command\n",
|
|
sc->unit);
|
|
|
|
RAY_DPRINTFN(15, ("ray%d: Download now awaiting completion\n",
|
|
sc->unit));
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Download completion routine.
|
|
*
|
|
* Part of ray_init, download, start_join control flow.
|
|
*
|
|
* As START_PARAMS is an update command ray_check_ccs has checked the
|
|
* ccs status and re-scheduled timeouts if needed.
|
|
*/
|
|
static void
|
|
ray_download_done(struct ray_softc *sc)
|
|
{
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_download_done\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
ray_cmd_done(sc, SCP_UPD_STARTUP);
|
|
|
|
/*
|
|
* Fake the current network parameter settings so start_join_net
|
|
* will not bother updating them to the card (we would need to
|
|
* zero these anyway, so we might as well copy).
|
|
*/
|
|
sc->sc_c.np_net_type = sc->sc_d.np_net_type;
|
|
bcopy(sc->sc_d.np_ssid, sc->sc_c.np_ssid, IEEE80211_NWID_LEN);
|
|
|
|
ray_start_join_net(sc);
|
|
}
|
|
|
|
/*
|
|
* start or join a network
|
|
*/
|
|
static void
|
|
ray_start_join_net(struct ray_softc *sc)
|
|
{
|
|
struct ray_net_params np;
|
|
struct ifnet *ifp;
|
|
size_t ccs;
|
|
int cmd, update;
|
|
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_start_join_net\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
ray_cmd_cancel(sc, SCP_UPD_STARTJOIN);
|
|
if ((ifp->if_flags & IFF_RUNNING) == 0)
|
|
return;
|
|
|
|
/* XXX check we may not want to re-issue */
|
|
if (ray_cmd_is_running(sc, SCP_UPDATESUBCMD)) {
|
|
ray_cmd_schedule(sc, SCP_UPD_STARTJOIN);
|
|
return;
|
|
}
|
|
|
|
if (sc->sc_d.np_net_type == RAY_MIB_NET_TYPE_ADHOC)
|
|
cmd = RAY_CMD_START_NET;
|
|
else
|
|
cmd = RAY_CMD_JOIN_NET;
|
|
|
|
if (!ray_alloc_ccs(sc, &ccs, cmd, SCP_UPD_STARTJOIN)) {
|
|
printf("ray%d: ray_start_join_net can't get a CCS\n", sc->unit);
|
|
ray_reset(sc);
|
|
}
|
|
|
|
update = 0;
|
|
if (bcmp(sc->sc_c.np_ssid, sc->sc_d.np_ssid, IEEE80211_NWID_LEN))
|
|
update++;
|
|
if (sc->sc_c.np_net_type != sc->sc_d.np_net_type)
|
|
update++;
|
|
|
|
if (update) {
|
|
sc->sc_havenet = 0;
|
|
|
|
bzero(&np, sizeof(np));
|
|
np.p_net_type = sc->sc_d.np_net_type;
|
|
bcopy(sc->sc_d.np_ssid, np.p_ssid, IEEE80211_NWID_LEN);
|
|
np.p_privacy_must_start = sc->sc_d.np_priv_start;
|
|
np.p_privacy_can_join = sc->sc_d.np_priv_join;
|
|
|
|
ray_write_region(sc, RAY_HOST_TO_ECF_BASE, &np, sizeof(np));
|
|
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd_net, c_upd_param, 1);
|
|
} else
|
|
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd_net, c_upd_param, 0);
|
|
|
|
RAY_DPRINTFN(15, ("ray%d: ray_start_join_net %s updating nw params\n",
|
|
sc->unit, update?"is":"not"));
|
|
|
|
if (!ray_issue_cmd(sc, ccs, SCP_UPD_STARTJOIN)) {
|
|
printf("ray%d: ray_start_join_net can't issue cmd\n", sc->unit);
|
|
ray_reset(sc);
|
|
}
|
|
|
|
#if RAY_NEED_STARTJOIN_TIMO
|
|
sc->sj_timerh = timeout(ray_start_join_timo, sc, RAY_SJ_TIMEOUT);
|
|
#endif /* RAY_NEED_STARTJOIN_TIMO */
|
|
}
|
|
|
|
#if RAY_NEED_STARTJOIN_TIMO
|
|
/*
|
|
* Back stop catcher for start_join command. The NetBSD driver
|
|
* suggests that they need it to catch a bug in the firmware or the
|
|
* parameters they use - they are not sure. I'll just panic as I seem
|
|
* to get interrupts back fine and I have version 4 firmware.
|
|
*/
|
|
static void
|
|
ray_start_join_timo(void *xsc)
|
|
{
|
|
struct ray_softc *sc = xsc;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_start_join_timo\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
panic("ray%d: ray-start_join_timo occured\n", sc->unit);
|
|
|
|
return;
|
|
}
|
|
#endif /* RAY_NEED_STARTJOIN_TIMO */
|
|
|
|
/******************************************************************************
|
|
* XXX NOT KNF FROM HERE DOWN *
|
|
******************************************************************************/
|
|
/*
|
|
* Complete start or join command.
|
|
*
|
|
* Part of ray_init, download, start_join control flow.
|
|
*/
|
|
static void
|
|
ray_start_join_done(sc, ccs, status)
|
|
struct ray_softc *sc;
|
|
size_t ccs;
|
|
u_int8_t status;
|
|
{
|
|
struct ifnet *ifp;
|
|
u_int8_t o_net_type;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_start_join_done\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
#if RAY_NEED_STARTJOIN_TIMO
|
|
untimeout(ray_start_join_timo, sc, sc->sj_timerh);
|
|
#endif /* RAY_NEED_STARTJOIN_TIMO */
|
|
|
|
ray_cmd_done(sc, SCP_UPD_STARTJOIN);
|
|
|
|
/*
|
|
* XXX This switch and the following test are badly done. I
|
|
* XXX need to take remedial action in each case branch and
|
|
* XXX return from there. Then remove the test.
|
|
* XXX FAIL comment
|
|
* XXX if we fired the start command we successfully set the card up
|
|
* XXX so just restart ray_start_join sequence and dont reset the card
|
|
* XXX may need to split download_done for this
|
|
* XXX FREE
|
|
* XXX not sure
|
|
* XXX BUSY
|
|
* XXX maybe timeout but why would we get an interrupt when
|
|
* XXX the card is not finished?
|
|
*/
|
|
switch (status) {
|
|
|
|
case RAY_CCS_STATUS_FREE:
|
|
case RAY_CCS_STATUS_BUSY:
|
|
printf("ray%d: ray_start_join_done status is FREE/BUSY - why?\n",
|
|
sc->unit);
|
|
break;
|
|
|
|
case RAY_CCS_STATUS_COMPLETE:
|
|
break;
|
|
|
|
case RAY_CCS_STATUS_FAIL:
|
|
printf("ray%d: ray_start_join_done status is FAIL - why?\n",
|
|
sc->unit);
|
|
sc->sc_havenet = 0;
|
|
break;
|
|
|
|
default:
|
|
printf("ray%d: ray_start_join_done unknown status 0x%x\n",
|
|
sc->unit, status);
|
|
break;
|
|
}
|
|
if (status != RAY_CCS_STATUS_COMPLETE)
|
|
return;
|
|
|
|
/*
|
|
* If the command completed correctly, get a few network parameters
|
|
* from the ccs and active the network.
|
|
*/
|
|
ray_read_region(sc, ccs, &sc->sc_c.p_1, sizeof(struct ray_cmd_net));
|
|
|
|
/* adjust values for buggy build 4 */
|
|
if (sc->sc_c.np_def_txrate == 0x55)
|
|
sc->sc_c.np_def_txrate = sc->sc_d.np_def_txrate;
|
|
if (sc->sc_c.np_encrypt == 0x55)
|
|
sc->sc_c.np_encrypt = sc->sc_d.np_encrypt;
|
|
|
|
/* card is telling us to update the network parameters */
|
|
if (sc->sc_c.np_upd_param) {
|
|
RAY_DPRINTFN(1, ("ray%d: sj_done card updating parameters - why?\n",
|
|
sc->unit));
|
|
o_net_type = sc->sc_c.np_net_type; /* XXX this may be wrong? */
|
|
ray_read_region(sc, RAY_HOST_TO_ECF_BASE,
|
|
&sc->sc_c.p_2, sizeof(struct ray_net_params));
|
|
if (sc->sc_c.np_net_type != o_net_type) {
|
|
printf("ray%d: sj_done card changing network type - why?\n",
|
|
sc->unit);
|
|
#if XXX
|
|
restart ray_start_join sequence
|
|
may need to split download_done for this
|
|
#endif
|
|
}
|
|
}
|
|
RAY_DNET_DUMP(sc, " after start/join network completed.");
|
|
|
|
/*
|
|
* Hurrah! The network is now active.
|
|
*
|
|
* Clearing IFF_OACTIVE will ensure that the system will queue packets.
|
|
* Just before we return from the interrupt context we check to
|
|
* see if packets have been queued.
|
|
*/
|
|
ray_cmd_schedule(sc, SCP_UPD_MCAST|SCP_UPD_PROMISC);
|
|
|
|
if (SRAM_READ_FIELD_1(sc, ccs, ray_cmd, c_cmd) == RAY_CMD_JOIN_NET)
|
|
ray_start_assoc(sc);
|
|
else {
|
|
sc->sc_havenet = 1;
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/******************************************************************************
|
|
* XXX NOT KNF FROM HERE UP
|
|
******************************************************************************/
|
|
|
|
/*
|
|
* set the card in/out of promiscuous mode
|
|
*/
|
|
static void
|
|
ray_update_promisc(struct ray_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
size_t ccs;
|
|
int promisc;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_update_promisc\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
ray_cmd_cancel(sc, SCP_UPD_PROMISC);
|
|
|
|
/* do the issue check before equality check */
|
|
promisc = !!(ifp->if_flags & (IFF_PROMISC | IFF_ALLMULTI));
|
|
if ((ifp->if_flags & IFF_RUNNING) == 0)
|
|
return;
|
|
else if (ray_cmd_is_running(sc, SCP_UPDATESUBCMD)) {
|
|
ray_cmd_schedule(sc, SCP_UPD_PROMISC);
|
|
return;
|
|
} else if (promisc == sc->sc_promisc)
|
|
return;
|
|
else if (!ray_alloc_ccs(sc,&ccs,RAY_CMD_UPDATE_PARAMS, SCP_UPD_PROMISC))
|
|
return;
|
|
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd_update, c_paramid, RAY_MIB_PROMISC);
|
|
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd_update, c_nparam, 1);
|
|
SRAM_WRITE_1(sc, RAY_HOST_TO_ECF_BASE, promisc);
|
|
(void)ray_issue_cmd(sc, ccs, SCP_UPD_PROMISC);
|
|
}
|
|
|
|
/*
|
|
* update the parameter based on what the user passed in
|
|
*/
|
|
static void
|
|
ray_update_params(struct ray_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
size_t ccs;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_update_params\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
ray_cmd_cancel(sc, SCP_UPD_UPDATEPARAMS);
|
|
if (!sc->sc_updreq) {
|
|
/* XXX do we need to wakeup here? */
|
|
return;
|
|
}
|
|
|
|
/* do the issue check before equality check */
|
|
if ((ifp->if_flags & IFF_RUNNING) == 0)
|
|
return;
|
|
else if (ray_cmd_is_running(sc, SCP_UPDATESUBCMD)) {
|
|
ray_cmd_schedule(sc, SCP_UPD_UPDATEPARAMS);
|
|
return;
|
|
} else if (!ray_alloc_ccs(sc, &ccs, RAY_CMD_UPDATE_PARAMS,
|
|
SCP_UPD_UPDATEPARAMS))
|
|
return;
|
|
|
|
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd_update, c_paramid,
|
|
sc->sc_updreq->r_paramid);
|
|
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd_update, c_nparam, 1);
|
|
ray_write_region(sc, RAY_HOST_TO_ECF_BASE, sc->sc_updreq->r_data,
|
|
sc->sc_updreq->r_len);
|
|
|
|
(void)ray_issue_cmd(sc, ccs, SCP_UPD_UPDATEPARAMS);
|
|
}
|
|
|
|
/*
|
|
* set the multicast filter list
|
|
*/
|
|
static void
|
|
ray_update_mcast(struct ray_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
struct ifmultiaddr *ifma;
|
|
size_t ccs, bufp;
|
|
int count;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_update_mcast\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
ray_cmd_cancel(sc, SCP_UPD_MCAST);
|
|
|
|
for (ifma = ifp->if_multiaddrs.lh_first, count = 0; ifma != NULL;
|
|
ifma = ifma->ifma_link.le_next, count++)
|
|
|
|
/* track this stuff even when not running */
|
|
if (count > 16) {
|
|
ifp->if_flags |= IFF_ALLMULTI;
|
|
ray_update_promisc(sc);
|
|
return;
|
|
} else if (ifp->if_flags & IFF_ALLMULTI) {
|
|
ifp->if_flags &= ~IFF_ALLMULTI;
|
|
ray_update_promisc(sc);
|
|
}
|
|
|
|
if ((ifp->if_flags & IFF_RUNNING) == 0)
|
|
return;
|
|
else if (ray_cmd_is_running(sc, SCP_UPDATESUBCMD)) {
|
|
ray_cmd_schedule(sc, SCP_UPD_MCAST);
|
|
return;
|
|
} else if (!ray_alloc_ccs(sc,&ccs, RAY_CMD_UPDATE_MCAST, SCP_UPD_MCAST))
|
|
return;
|
|
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd_update_mcast, c_nmcast, count);
|
|
bufp = RAY_HOST_TO_ECF_BASE;
|
|
for (ifma = ifp->if_multiaddrs.lh_first; ifma != NULL;
|
|
ifma = ifma->ifma_link.le_next) {
|
|
ray_write_region(
|
|
sc,
|
|
bufp,
|
|
LLADDR((struct sockaddr_dl *)ifma->ifma_addr),
|
|
ETHER_ADDR_LEN
|
|
);
|
|
bufp += ETHER_ADDR_LEN;
|
|
}
|
|
(void)ray_issue_cmd(sc, ccs, SCP_UPD_MCAST);
|
|
}
|
|
|
|
/*
|
|
* User issued commands
|
|
*/
|
|
|
|
/*
|
|
* issue a update params
|
|
*
|
|
* expected to be called in sleapable context -- intended for user stuff
|
|
*/
|
|
static int
|
|
ray_user_update_params(struct ray_softc *sc, struct ray_param_req *pr)
|
|
{
|
|
struct ifnet *ifp;
|
|
int rv;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_user_update_params\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
if ((ifp->if_flags & IFF_RUNNING) == 0) {
|
|
pr->r_failcause = RAY_FAILCAUSE_EDEVSTOP;
|
|
return (EIO);
|
|
}
|
|
|
|
if (pr->r_paramid > RAY_MIB_MAX) {
|
|
return (EINVAL);
|
|
}
|
|
|
|
/*
|
|
* Handle certain parameters specially
|
|
*/
|
|
switch (pr->r_paramid) {
|
|
case RAY_MIB_NET_TYPE:
|
|
if (sc->sc_c.np_net_type == *pr->r_data)
|
|
return (0);
|
|
sc->sc_d.np_net_type = *pr->r_data;
|
|
if (ifp->if_flags & IFF_RUNNING)
|
|
ray_start_join_net(sc);
|
|
return (0);
|
|
|
|
case RAY_MIB_SSID:
|
|
if (bcmp(sc->sc_c.np_ssid, pr->r_data, IEEE80211_NWID_LEN) == 0)
|
|
return (0);
|
|
bcopy(pr->r_data, sc->sc_d.np_ssid, IEEE80211_NWID_LEN);
|
|
if (ifp->if_flags & IFF_RUNNING)
|
|
ray_start_join_net(sc);
|
|
return (0);
|
|
|
|
case RAY_MIB_BASIC_RATE_SET:
|
|
sc->sc_d.np_def_txrate = *pr->r_data;
|
|
break;
|
|
|
|
case RAY_MIB_AP_STATUS: /* Unsupported */
|
|
case RAY_MIB_MAC_ADDR: /* XXX Need interface up */
|
|
case RAY_MIB_PROMISC: /* BPF */
|
|
return (EINVAL);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (pr->r_paramid > RAY_MIB_LASTUSER) {
|
|
return (EINVAL);
|
|
}
|
|
|
|
/* wait to be able to issue the command */
|
|
rv = 0;
|
|
while (ray_cmd_is_running(sc, SCP_UPD_UPDATEPARAMS) ||
|
|
ray_cmd_is_scheduled(sc, SCP_UPD_UPDATEPARAMS)) {
|
|
rv = tsleep(ray_update_params, 0|PCATCH, "cmd in use", 0);
|
|
if (rv)
|
|
return (rv);
|
|
if ((ifp->if_flags & IFF_RUNNING) == 0) {
|
|
pr->r_failcause = RAY_FAILCAUSE_EDEVSTOP;
|
|
return (EIO);
|
|
}
|
|
}
|
|
|
|
pr->r_failcause = RAY_FAILCAUSE_WAITING;
|
|
sc->sc_updreq = pr;
|
|
ray_cmd_schedule(sc, SCP_UPD_UPDATEPARAMS);
|
|
ray_check_scheduled(sc);
|
|
|
|
while (pr->r_failcause == RAY_FAILCAUSE_WAITING)
|
|
(void)tsleep(ray_update_params, 0, "waiting cmd", 0);
|
|
wakeup(ray_update_params);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* issue a report params
|
|
*
|
|
* expected to be called in sleapable context -- intended for user stuff
|
|
*/
|
|
static int
|
|
ray_user_report_params(struct ray_softc *sc, struct ray_param_req *pr)
|
|
{
|
|
struct ifnet *ifp;
|
|
int mib_sizes[] = RAY_MIB_SIZES;
|
|
int rv;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_user_report_params\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
if ((ifp->if_flags & IFF_RUNNING) == 0) {
|
|
pr->r_failcause = RAY_FAILCAUSE_EDEVSTOP;
|
|
return (EIO);
|
|
}
|
|
|
|
/* test for illegal values or immediate responses */
|
|
if (pr->r_paramid > RAY_MIB_LASTUSER) {
|
|
switch (pr->r_paramid) {
|
|
|
|
case RAY_MIB_VERSION:
|
|
if (sc->sc_version == RAY_ECFS_BUILD_4)
|
|
*pr->r_data = 4;
|
|
else
|
|
*pr->r_data = 5;
|
|
break;
|
|
|
|
case RAY_MIB_CUR_BSSID:
|
|
bcopy(sc->sc_c.np_bss_id, pr->r_data, ETHER_ADDR_LEN);
|
|
break;
|
|
case RAY_MIB_CUR_INITED:
|
|
*pr->r_data = sc->sc_c.np_inited;
|
|
break;
|
|
case RAY_MIB_CUR_DEF_TXRATE:
|
|
*pr->r_data = sc->sc_c.np_def_txrate;
|
|
break;
|
|
case RAY_MIB_CUR_ENCRYPT:
|
|
*pr->r_data = sc->sc_c.np_encrypt;
|
|
break;
|
|
case RAY_MIB_CUR_NET_TYPE:
|
|
*pr->r_data = sc->sc_c.np_net_type;
|
|
break;
|
|
case RAY_MIB_CUR_SSID:
|
|
bcopy(sc->sc_c.np_ssid, pr->r_data, IEEE80211_NWID_LEN);
|
|
break;
|
|
case RAY_MIB_CUR_PRIV_START:
|
|
*pr->r_data = sc->sc_c.np_priv_start;
|
|
break;
|
|
case RAY_MIB_CUR_PRIV_JOIN:
|
|
*pr->r_data = sc->sc_c.np_priv_join;
|
|
break;
|
|
|
|
case RAY_MIB_DES_BSSID:
|
|
bcopy(sc->sc_d.np_bss_id, pr->r_data, ETHER_ADDR_LEN);
|
|
break;
|
|
case RAY_MIB_DES_INITED:
|
|
*pr->r_data = sc->sc_d.np_inited;
|
|
break;
|
|
case RAY_MIB_DES_DEF_TXRATE:
|
|
*pr->r_data = sc->sc_d.np_def_txrate;
|
|
break;
|
|
case RAY_MIB_DES_ENCRYPT:
|
|
*pr->r_data = sc->sc_d.np_encrypt;
|
|
break;
|
|
case RAY_MIB_DES_NET_TYPE:
|
|
*pr->r_data = sc->sc_d.np_net_type;
|
|
break;
|
|
case RAY_MIB_DES_SSID:
|
|
bcopy(sc->sc_d.np_ssid, pr->r_data, IEEE80211_NWID_LEN);
|
|
break;
|
|
case RAY_MIB_DES_PRIV_START:
|
|
*pr->r_data = sc->sc_d.np_priv_start;
|
|
break;
|
|
case RAY_MIB_DES_PRIV_JOIN:
|
|
*pr->r_data = sc->sc_d.np_priv_join;
|
|
break;
|
|
|
|
default:
|
|
return (EINVAL);
|
|
break;
|
|
}
|
|
pr->r_failcause = 0;
|
|
pr->r_len = mib_sizes[pr->r_paramid];
|
|
return (0);
|
|
}
|
|
|
|
/* wait to be able to issue the command */
|
|
rv = 0;
|
|
while (ray_cmd_is_running(sc, SCP_REPORTPARAMS)
|
|
|| ray_cmd_is_scheduled(sc, SCP_REPORTPARAMS)) {
|
|
rv = tsleep(ray_report_params, 0|PCATCH, "cmd in use", 0);
|
|
if (rv)
|
|
return (rv);
|
|
if ((ifp->if_flags & IFF_RUNNING) == 0) {
|
|
pr->r_failcause = RAY_FAILCAUSE_EDEVSTOP;
|
|
return (EIO);
|
|
}
|
|
}
|
|
|
|
pr->r_failcause = RAY_FAILCAUSE_WAITING;
|
|
sc->sc_repreq = pr;
|
|
ray_cmd_schedule(sc, SCP_REPORTPARAMS);
|
|
ray_check_scheduled(sc);
|
|
|
|
while (pr->r_failcause == RAY_FAILCAUSE_WAITING)
|
|
(void)tsleep(ray_report_params, 0, "waiting cmd", 0);
|
|
wakeup(ray_report_params);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* return the error counters
|
|
*/
|
|
static int
|
|
ray_user_report_stats(struct ray_softc *sc, struct ray_stats_req *sr)
|
|
{
|
|
struct ifnet *ifp;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: ray_user_report_stats\n", sc->unit));
|
|
RAY_MAP_CM(sc);
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
if ((ifp->if_flags & IFF_RUNNING) == 0) {
|
|
return (EIO);
|
|
}
|
|
|
|
sr->rxoverflow = sc->sc_rxoverflow;
|
|
sr->rxcksum = sc->sc_rxcksum;
|
|
sr->rxhcksum = sc->sc_rxhcksum;
|
|
sr->rxnoise = sc->sc_rxnoise;
|
|
|
|
return (0);
|
|
}
|
|
/******************************************************************************
|
|
* XXX NOT KNF FROM HERE DOWN
|
|
******************************************************************************/
|
|
|
|
/*
|
|
* Routines to read from/write to the attribute memory.
|
|
*
|
|
* Taken from if_xe.c.
|
|
*
|
|
* Until there is a real way of accessing the attribute memory from a driver
|
|
* these have to stay.
|
|
*
|
|
* The hack to use the crdread/crdwrite device functions causes the attribute
|
|
* memory to be remapped into the controller and looses the mapping of
|
|
* the common memory.
|
|
*
|
|
* We cheat by using PIOCSMEM and assume that the common memory window
|
|
* is in window 0 of the card structure.
|
|
*
|
|
* Also
|
|
* pccard/pcic.c/crdread does mark the unmapped window as inactive
|
|
* pccard/pccard.c/map_mem toggles the mapping of a window on
|
|
* successive calls
|
|
*
|
|
*/
|
|
#if (RAY_NEED_CM_REMAPPING | RAY_NEED_CM_FIXUP)
|
|
static void
|
|
ray_attr_getmap(struct ray_softc *sc)
|
|
{
|
|
struct ucred uc;
|
|
struct pcred pc;
|
|
struct proc p;
|
|
int result;
|
|
|
|
RAY_DPRINTFN(5, ("ray%d: attempting to get map for common memory\n",
|
|
sc->unit));
|
|
|
|
sc->md.window = 0;
|
|
|
|
p.p_cred = &pc;
|
|
p.p_cred->pc_ucred = &uc;
|
|
p.p_cred->pc_ucred->cr_uid = 0;
|
|
|
|
result = cdevsw[CARD_MAJOR]->d_ioctl(makedev(CARD_MAJOR, sc->slotnum), PIOCGMEM, (caddr_t)&sc->md, 0, &p);
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
ray_attr_cm(struct ray_softc *sc)
|
|
{
|
|
struct ucred uc;
|
|
struct pcred pc;
|
|
struct proc p;
|
|
|
|
RAY_DPRINTFN(100, ("ray%d: attempting to remap common memory\n", sc->unit));
|
|
|
|
p.p_cred = &pc;
|
|
p.p_cred->pc_ucred = &uc;
|
|
p.p_cred->pc_ucred->cr_uid = 0;
|
|
|
|
cdevsw[CARD_MAJOR]->d_ioctl(makedev(CARD_MAJOR, sc->slotnum), PIOCSMEM, (caddr_t)&sc->md, 0, &p);
|
|
|
|
return;
|
|
}
|
|
#endif /* (RAY_NEED_CM_REMAPPING | RAY_NEED_CM_FIXUP) */
|
|
|
|
static int
|
|
ray_attr_write(struct ray_softc *sc, off_t offset, u_int8_t byte)
|
|
{
|
|
struct iovec iov;
|
|
struct uio uios;
|
|
int err;
|
|
|
|
iov.iov_base = &byte;
|
|
iov.iov_len = sizeof(byte);
|
|
|
|
uios.uio_iov = &iov;
|
|
uios.uio_iovcnt = 1;
|
|
uios.uio_offset = offset;
|
|
uios.uio_resid = sizeof(byte);
|
|
uios.uio_segflg = UIO_SYSSPACE;
|
|
uios.uio_rw = UIO_WRITE;
|
|
uios.uio_procp = 0;
|
|
|
|
err = cdevsw[CARD_MAJOR]->d_write(makedev(CARD_MAJOR, sc->slotnum), &uios, 0);
|
|
|
|
#if RAY_NEED_CM_REMAPPING
|
|
ray_attr_cm(sc);
|
|
#endif /* RAY_NEED_CM_REMAPPING */
|
|
|
|
return (err);
|
|
}
|
|
|
|
static int
|
|
ray_attr_read(struct ray_softc *sc, off_t offset, u_int8_t *buf, int size)
|
|
{
|
|
struct iovec iov;
|
|
struct uio uios;
|
|
int err;
|
|
|
|
iov.iov_base = buf;
|
|
iov.iov_len = size;
|
|
|
|
uios.uio_iov = &iov;
|
|
uios.uio_iovcnt = 1;
|
|
uios.uio_offset = offset;
|
|
uios.uio_resid = size;
|
|
uios.uio_segflg = UIO_SYSSPACE;
|
|
uios.uio_rw = UIO_READ;
|
|
uios.uio_procp = 0;
|
|
|
|
err = cdevsw[CARD_MAJOR]->d_read(makedev(CARD_MAJOR, sc->slotnum), &uios, 0);
|
|
|
|
#if RAY_NEED_CM_REMAPPING
|
|
ray_attr_cm(sc);
|
|
#endif /* RAY_NEED_CM_REMAPPING */
|
|
|
|
return (err);
|
|
}
|
|
|
|
static u_int8_t
|
|
ray_read_reg(sc, reg)
|
|
struct ray_softc *sc;
|
|
off_t reg;
|
|
{
|
|
u_int8_t byte;
|
|
|
|
ray_attr_read(sc, reg, &byte, 1);
|
|
|
|
return (byte);
|
|
}
|
|
|
|
#if RAY_DEBUG > 50
|
|
static void
|
|
ray_dump_mbuf(sc, m, s)
|
|
struct ray_softc *sc;
|
|
struct mbuf *m;
|
|
char *s;
|
|
{
|
|
u_int8_t *d, *ed;
|
|
u_int i;
|
|
char p[17];
|
|
|
|
printf("ray%d: %s mbuf dump:", sc->unit, s);
|
|
i = 0;
|
|
bzero(p, 17);
|
|
for (; m; m = m->m_next) {
|
|
d = mtod(m, u_int8_t *);
|
|
ed = d + m->m_len;
|
|
|
|
for (; d < ed; i++, d++) {
|
|
if ((i % 16) == 0) {
|
|
printf(" %s\n\t", p);
|
|
} else if ((i % 8) == 0)
|
|
printf(" ");
|
|
printf(" %02x", *d);
|
|
p[i % 16] = ((*d >= 0x20) && (*d < 0x80)) ? *d : '.';
|
|
}
|
|
}
|
|
if ((i - 1) % 16)
|
|
printf("%s\n", p);
|
|
}
|
|
#endif /* RAY_DEBUG > 50 */
|
|
|
|
#endif /* NRAY */ |