freebsd-skq/sys/mips/atheros/ar71xx_ehci.c
Hans Petter Selasky 2e14174893 Implement better support for USB controller suspend and resume.
This patch should remove the need for kldunload of USB
controller drivers at suspend and kldload of USB controller
drivers at resume.

This patch also fixes some build issues in avr32dci.c

MFC after:	2 weeks
2011-12-14 00:28:54 +00:00

258 lines
6.7 KiB
C

/*-
* Copyright (c) 2008 Sam Leffler. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* AR71XX attachment driver for the USB Enhanced Host Controller.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_bus.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/rman.h>
#include <sys/condvar.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <machine/bus.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usb_core.h>
#include <dev/usb/usb_busdma.h>
#include <dev/usb/usb_process.h>
#include <dev/usb/usb_util.h>
#include <dev/usb/usb_controller.h>
#include <dev/usb/usb_bus.h>
#include <dev/usb/controller/ehci.h>
#include <dev/usb/controller/ehcireg.h>
#include <mips/atheros/ar71xx_setup.h>
#include <mips/atheros/ar71xx_bus_space_reversed.h>
#define EHCI_HC_DEVSTR "AR71XX Integrated USB 2.0 controller"
struct ar71xx_ehci_softc {
ehci_softc_t base; /* storage for EHCI code */
};
static device_attach_t ar71xx_ehci_attach;
static device_detach_t ar71xx_ehci_detach;
bs_r_1_proto(reversed);
bs_w_1_proto(reversed);
static int
ar71xx_ehci_probe(device_t self)
{
device_set_desc(self, EHCI_HC_DEVSTR);
return (BUS_PROBE_DEFAULT);
}
static int
ar71xx_ehci_attach(device_t self)
{
struct ar71xx_ehci_softc *isc = device_get_softc(self);
ehci_softc_t *sc = &isc->base;
int err;
int rid;
/* initialise some bus fields */
sc->sc_bus.parent = self;
sc->sc_bus.devices = sc->sc_devices;
sc->sc_bus.devices_max = EHCI_MAX_DEVICES;
/* get all DMA memory */
if (usb_bus_mem_alloc_all(&sc->sc_bus,
USB_GET_DMA_TAG(self), &ehci_iterate_hw_softc)) {
return (ENOMEM);
}
sc->sc_bus.usbrev = USB_REV_2_0;
/* NB: hints fix the memory location and irq */
rid = 0;
sc->sc_io_res = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid, RF_ACTIVE);
if (!sc->sc_io_res) {
device_printf(self, "Could not map memory\n");
goto error;
}
/*
* Craft special resource for bus space ops that handle
* byte-alignment of non-word addresses.
*/
sc->sc_io_tag = ar71xx_bus_space_reversed;
sc->sc_io_hdl = rman_get_bushandle(sc->sc_io_res);
sc->sc_io_size = rman_get_size(sc->sc_io_res);
rid = 0;
sc->sc_irq_res = bus_alloc_resource_any(self, SYS_RES_IRQ, &rid,
RF_ACTIVE);
if (sc->sc_irq_res == NULL) {
device_printf(self, "Could not allocate irq\n");
goto error;
}
sc->sc_bus.bdev = device_add_child(self, "usbus", -1);
if (!sc->sc_bus.bdev) {
device_printf(self, "Could not add USB device\n");
goto error;
}
device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus);
device_set_desc(sc->sc_bus.bdev, EHCI_HC_DEVSTR);
sprintf(sc->sc_vendor, "Atheros");
err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
NULL, (driver_intr_t *)ehci_interrupt, sc, &sc->sc_intr_hdl);
if (err) {
device_printf(self, "Could not setup irq, %d\n", err);
sc->sc_intr_hdl = NULL;
goto error;
}
/*
* Arrange to force Host mode, select big-endian byte alignment,
* and arrange to not terminate reset operations (the adapter
* will ignore it if we do but might as well save a reg write).
* Also, the controller has an embedded Transaction Translator
* which means port speed must be read from the Port Status
* register following a port enable.
*/
sc->sc_flags = EHCI_SCFLG_SETMODE;
switch (ar71xx_soc) {
case AR71XX_SOC_AR7241:
case AR71XX_SOC_AR7242:
case AR71XX_SOC_AR9130:
case AR71XX_SOC_AR9132:
sc->sc_flags |= EHCI_SCFLG_TT | EHCI_SCFLG_NORESTERM;
break;
default:
/* fallthrough */
break;
}
/*
* ehci_reset() needs the correct offset to access the host controller
* registers. The AR724x/AR913x offsets aren't 0.
*/
sc->sc_offs = EHCI_CAPLENGTH(EREAD4(sc, EHCI_CAPLEN_HCIVERSION));
(void) ehci_reset(sc);
err = ehci_init(sc);
if (!err) {
err = device_probe_and_attach(sc->sc_bus.bdev);
}
if (err) {
device_printf(self, "USB init failed err=%d\n", err);
goto error;
}
return (0);
error:
ar71xx_ehci_detach(self);
return (ENXIO);
}
static int
ar71xx_ehci_detach(device_t self)
{
struct ar71xx_ehci_softc *isc = device_get_softc(self);
ehci_softc_t *sc = &isc->base;
device_t bdev;
int err;
if (sc->sc_bus.bdev) {
bdev = sc->sc_bus.bdev;
device_detach(bdev);
device_delete_child(self, bdev);
}
/* during module unload there are lots of children leftover */
device_delete_children(self);
if (sc->sc_irq_res && sc->sc_intr_hdl) {
/*
* only call ehci_detach() after ehci_init()
*/
ehci_detach(sc);
err = bus_teardown_intr(self, sc->sc_irq_res, sc->sc_intr_hdl);
if (err)
/* XXX or should we panic? */
device_printf(self, "Could not tear down irq, %d\n",
err);
sc->sc_intr_hdl = NULL;
}
if (sc->sc_irq_res) {
bus_release_resource(self, SYS_RES_IRQ, 0, sc->sc_irq_res);
sc->sc_irq_res = NULL;
}
if (sc->sc_io_res) {
bus_release_resource(self, SYS_RES_MEMORY, 0,
sc->sc_io_res);
sc->sc_io_res = NULL;
}
usb_bus_mem_free_all(&sc->sc_bus, &ehci_iterate_hw_softc);
return (0);
}
static device_method_t ehci_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, ar71xx_ehci_probe),
DEVMETHOD(device_attach, ar71xx_ehci_attach),
DEVMETHOD(device_detach, ar71xx_ehci_detach),
DEVMETHOD(device_suspend, bus_generic_suspend),
DEVMETHOD(device_resume, bus_generic_resume),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD_END
};
static driver_t ehci_driver = {
.name = "ehci",
.methods = ehci_methods,
.size = sizeof(struct ar71xx_ehci_softc),
};
static devclass_t ehci_devclass;
DRIVER_MODULE(ehci, nexus, ehci_driver, ehci_devclass, 0, 0);
MODULE_DEPEND(ehci, usb, 1, 1, 1);