freebsd-skq/sys/mips/cavium/octe/ethernet-spi.c
Juli Mallett dc4ee6ca91 Merge the Cavium Octeon SDK 2.3.0 Simple Executive code and update FreeBSD to
make use of it where possible.

This primarily brings in support for newer hardware, and FreeBSD is not yet
able to support the abundance of IRQs on new hardware and many features in the
Ethernet driver.

Because of the changes to IRQs in the Simple Executive, we have to maintain our
own list of Octeon IRQs now, which probably can be pared-down and be specific
to the CIU interrupt unit soon, and when other interrupt mechanisms are added
they can maintain their own definitions.

Remove unmasking of interrupts from within the UART device now that the
function used is no longer present in the Simple Executive.  The unmasking
seems to have been gratuitous as this is more properly handled by the buses
above the UART device, and seems to work on that basis.
2012-03-11 06:17:49 +00:00

311 lines
11 KiB
C

/*************************************************************************
Copyright (c) 2003-2007 Cavium Networks (support@cavium.com). All rights
reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided
with the distribution.
* Neither the name of Cavium Networks nor the names of
its contributors may be used to endorse or promote products
derived from this software without specific prior written
permission.
This Software, including technical data, may be subject to U.S. export control laws, including the U.S. Export Administration Act and its associated regulations, and may be subject to export or import regulations in other countries.
TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE, MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
*************************************************************************/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/endian.h>
#include <sys/kernel.h>
#include <sys/mbuf.h>
#include <sys/rman.h>
#include <sys/socket.h>
#include <net/ethernet.h>
#include <net/if.h>
#include "wrapper-cvmx-includes.h"
#include "ethernet-headers.h"
#include "octebusvar.h"
static int number_spi_ports;
static int need_retrain[2] = {0, 0};
static int cvm_oct_spi_rml_interrupt(void *dev_id)
{
int return_status = FILTER_STRAY;
cvmx_npi_rsl_int_blocks_t rsl_int_blocks;
/* Check and see if this interrupt was caused by the GMX block */
rsl_int_blocks.u64 = cvmx_read_csr(CVMX_NPI_RSL_INT_BLOCKS);
if (rsl_int_blocks.s.spx1) { /* 19 - SPX1_INT_REG & STX1_INT_REG */
cvmx_spxx_int_reg_t spx_int_reg;
cvmx_stxx_int_reg_t stx_int_reg;
spx_int_reg.u64 = cvmx_read_csr(CVMX_SPXX_INT_REG(1));
cvmx_write_csr(CVMX_SPXX_INT_REG(1), spx_int_reg.u64);
if (!need_retrain[1]) {
spx_int_reg.u64 &= cvmx_read_csr(CVMX_SPXX_INT_MSK(1));
if (spx_int_reg.s.spf)
printf("SPI1: SRX Spi4 interface down\n");
if (spx_int_reg.s.calerr)
printf("SPI1: SRX Spi4 Calendar table parity error\n");
if (spx_int_reg.s.syncerr)
printf("SPI1: SRX Consecutive Spi4 DIP4 errors have exceeded SPX_ERR_CTL[ERRCNT]\n");
if (spx_int_reg.s.diperr)
printf("SPI1: SRX Spi4 DIP4 error\n");
if (spx_int_reg.s.tpaovr)
printf("SPI1: SRX Selected port has hit TPA overflow\n");
if (spx_int_reg.s.rsverr)
printf("SPI1: SRX Spi4 reserved control word detected\n");
if (spx_int_reg.s.drwnng)
printf("SPI1: SRX Spi4 receive FIFO drowning/overflow\n");
if (spx_int_reg.s.clserr)
printf("SPI1: SRX Spi4 packet closed on non-16B alignment without EOP\n");
if (spx_int_reg.s.spiovr)
printf("SPI1: SRX Spi4 async FIFO overflow\n");
if (spx_int_reg.s.abnorm)
printf("SPI1: SRX Abnormal packet termination (ERR bit)\n");
if (spx_int_reg.s.prtnxa)
printf("SPI1: SRX Port out of range\n");
}
stx_int_reg.u64 = cvmx_read_csr(CVMX_STXX_INT_REG(1));
cvmx_write_csr(CVMX_STXX_INT_REG(1), stx_int_reg.u64);
if (!need_retrain[1]) {
stx_int_reg.u64 &= cvmx_read_csr(CVMX_STXX_INT_MSK(1));
if (stx_int_reg.s.syncerr)
printf("SPI1: STX Interface encountered a fatal error\n");
if (stx_int_reg.s.frmerr)
printf("SPI1: STX FRMCNT has exceeded STX_DIP_CNT[MAXFRM]\n");
if (stx_int_reg.s.unxfrm)
printf("SPI1: STX Unexpected framing sequence\n");
if (stx_int_reg.s.nosync)
printf("SPI1: STX ERRCNT has exceeded STX_DIP_CNT[MAXDIP]\n");
if (stx_int_reg.s.diperr)
printf("SPI1: STX DIP2 error on the Spi4 Status channel\n");
if (stx_int_reg.s.datovr)
printf("SPI1: STX Spi4 FIFO overflow error\n");
if (stx_int_reg.s.ovrbst)
printf("SPI1: STX Transmit packet burst too big\n");
if (stx_int_reg.s.calpar1)
printf("SPI1: STX Calendar Table Parity Error Bank1\n");
if (stx_int_reg.s.calpar0)
printf("SPI1: STX Calendar Table Parity Error Bank0\n");
}
cvmx_write_csr(CVMX_SPXX_INT_MSK(1), 0);
cvmx_write_csr(CVMX_STXX_INT_MSK(1), 0);
need_retrain[1] = 1;
return_status = FILTER_HANDLED;
}
if (rsl_int_blocks.s.spx0) { /* 18 - SPX0_INT_REG & STX0_INT_REG */
cvmx_spxx_int_reg_t spx_int_reg;
cvmx_stxx_int_reg_t stx_int_reg;
spx_int_reg.u64 = cvmx_read_csr(CVMX_SPXX_INT_REG(0));
cvmx_write_csr(CVMX_SPXX_INT_REG(0), spx_int_reg.u64);
if (!need_retrain[0]) {
spx_int_reg.u64 &= cvmx_read_csr(CVMX_SPXX_INT_MSK(0));
if (spx_int_reg.s.spf)
printf("SPI0: SRX Spi4 interface down\n");
if (spx_int_reg.s.calerr)
printf("SPI0: SRX Spi4 Calendar table parity error\n");
if (spx_int_reg.s.syncerr)
printf("SPI0: SRX Consecutive Spi4 DIP4 errors have exceeded SPX_ERR_CTL[ERRCNT]\n");
if (spx_int_reg.s.diperr)
printf("SPI0: SRX Spi4 DIP4 error\n");
if (spx_int_reg.s.tpaovr)
printf("SPI0: SRX Selected port has hit TPA overflow\n");
if (spx_int_reg.s.rsverr)
printf("SPI0: SRX Spi4 reserved control word detected\n");
if (spx_int_reg.s.drwnng)
printf("SPI0: SRX Spi4 receive FIFO drowning/overflow\n");
if (spx_int_reg.s.clserr)
printf("SPI0: SRX Spi4 packet closed on non-16B alignment without EOP\n");
if (spx_int_reg.s.spiovr)
printf("SPI0: SRX Spi4 async FIFO overflow\n");
if (spx_int_reg.s.abnorm)
printf("SPI0: SRX Abnormal packet termination (ERR bit)\n");
if (spx_int_reg.s.prtnxa)
printf("SPI0: SRX Port out of range\n");
}
stx_int_reg.u64 = cvmx_read_csr(CVMX_STXX_INT_REG(0));
cvmx_write_csr(CVMX_STXX_INT_REG(0), stx_int_reg.u64);
if (!need_retrain[0]) {
stx_int_reg.u64 &= cvmx_read_csr(CVMX_STXX_INT_MSK(0));
if (stx_int_reg.s.syncerr)
printf("SPI0: STX Interface encountered a fatal error\n");
if (stx_int_reg.s.frmerr)
printf("SPI0: STX FRMCNT has exceeded STX_DIP_CNT[MAXFRM]\n");
if (stx_int_reg.s.unxfrm)
printf("SPI0: STX Unexpected framing sequence\n");
if (stx_int_reg.s.nosync)
printf("SPI0: STX ERRCNT has exceeded STX_DIP_CNT[MAXDIP]\n");
if (stx_int_reg.s.diperr)
printf("SPI0: STX DIP2 error on the Spi4 Status channel\n");
if (stx_int_reg.s.datovr)
printf("SPI0: STX Spi4 FIFO overflow error\n");
if (stx_int_reg.s.ovrbst)
printf("SPI0: STX Transmit packet burst too big\n");
if (stx_int_reg.s.calpar1)
printf("SPI0: STX Calendar Table Parity Error Bank1\n");
if (stx_int_reg.s.calpar0)
printf("SPI0: STX Calendar Table Parity Error Bank0\n");
}
cvmx_write_csr(CVMX_SPXX_INT_MSK(0), 0);
cvmx_write_csr(CVMX_STXX_INT_MSK(0), 0);
need_retrain[0] = 1;
return_status = FILTER_HANDLED;
}
return return_status;
}
static void cvm_oct_spi_enable_error_reporting(int interface)
{
cvmx_spxx_int_msk_t spxx_int_msk;
cvmx_stxx_int_msk_t stxx_int_msk;
spxx_int_msk.u64 = cvmx_read_csr(CVMX_SPXX_INT_MSK(interface));
spxx_int_msk.s.calerr = 1;
spxx_int_msk.s.syncerr = 1;
spxx_int_msk.s.diperr = 1;
spxx_int_msk.s.tpaovr = 1;
spxx_int_msk.s.rsverr = 1;
spxx_int_msk.s.drwnng = 1;
spxx_int_msk.s.clserr = 1;
spxx_int_msk.s.spiovr = 1;
spxx_int_msk.s.abnorm = 1;
spxx_int_msk.s.prtnxa = 1;
cvmx_write_csr(CVMX_SPXX_INT_MSK(interface), spxx_int_msk.u64);
stxx_int_msk.u64 = cvmx_read_csr(CVMX_STXX_INT_MSK(interface));
stxx_int_msk.s.frmerr = 1;
stxx_int_msk.s.unxfrm = 1;
stxx_int_msk.s.nosync = 1;
stxx_int_msk.s.diperr = 1;
stxx_int_msk.s.datovr = 1;
stxx_int_msk.s.ovrbst = 1;
stxx_int_msk.s.calpar1 = 1;
stxx_int_msk.s.calpar0 = 1;
cvmx_write_csr(CVMX_STXX_INT_MSK(interface), stxx_int_msk.u64);
}
static void cvm_oct_spi_poll(struct ifnet *ifp)
{
static int spi4000_port;
cvm_oct_private_t *priv = (cvm_oct_private_t *)ifp->if_softc;
int interface;
for (interface = 0; interface < 2; interface++) {
if ((priv->port == interface*16) && need_retrain[interface]) {
if (cvmx_spi_restart_interface(interface, CVMX_SPI_MODE_DUPLEX, 10) == 0) {
need_retrain[interface] = 0;
cvm_oct_spi_enable_error_reporting(interface);
}
}
/* The SPI4000 TWSI interface is very slow. In order not to
bring the system to a crawl, we only poll a single port
every second. This means negotiation speed changes
take up to 10 seconds, but at least we don't waste
absurd amounts of time waiting for TWSI */
if (priv->port == spi4000_port) {
/* This function does nothing if it is called on an
interface without a SPI4000 */
cvmx_spi4000_check_speed(interface, priv->port);
/* Normal ordering increments. By decrementing
we only match once per iteration */
spi4000_port--;
if (spi4000_port < 0)
spi4000_port = 10;
}
}
}
int cvm_oct_spi_init(struct ifnet *ifp)
{
struct octebus_softc *sc;
cvm_oct_private_t *priv = (cvm_oct_private_t *)ifp->if_softc;
int error;
int rid;
if (number_spi_ports == 0) {
sc = device_get_softc(device_get_parent(priv->dev));
rid = 0;
sc->sc_spi_irq = bus_alloc_resource(sc->sc_dev, SYS_RES_IRQ,
&rid, OCTEON_IRQ_RML,
OCTEON_IRQ_RML, 1,
RF_ACTIVE);
if (sc->sc_spi_irq == NULL) {
device_printf(sc->sc_dev, "could not allocate SPI irq");
return ENXIO;
}
error = bus_setup_intr(sc->sc_dev, sc->sc_spi_irq,
INTR_TYPE_NET | INTR_MPSAFE,
cvm_oct_spi_rml_interrupt, NULL,
&number_spi_ports, NULL);
if (error != 0) {
device_printf(sc->sc_dev, "could not setup SPI irq");
return error;
}
}
number_spi_ports++;
if ((priv->port == 0) || (priv->port == 16)) {
cvm_oct_spi_enable_error_reporting(INTERFACE(priv->port));
priv->poll = cvm_oct_spi_poll;
}
if (cvm_oct_common_init(ifp) != 0)
return ENXIO;
return 0;
}
void cvm_oct_spi_uninit(struct ifnet *ifp)
{
int interface;
cvm_oct_common_uninit(ifp);
number_spi_ports--;
if (number_spi_ports == 0) {
for (interface = 0; interface < 2; interface++) {
cvmx_write_csr(CVMX_SPXX_INT_MSK(interface), 0);
cvmx_write_csr(CVMX_STXX_INT_MSK(interface), 0);
}
panic("%s: IRQ release not yet implemented.", __func__);
}
}