d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5da45bdf5b
freebsd-skq/sys/dev/isp/isp_freebsd.c
mjacob 34224133fc Remove ISP_SMPLOCK stuff- we're just using locking now. 
Correctly reintroduce loop_seen_once semantics- that is, if we've never
seen good link, start bouncing commands with CAM_SEL_TIMEOUT. But we
have to be careful to have let ourselves try (in isp_kthread) to check
for loop up at least once.

PR:		28992
MFC after:	1 week
2001-07-25 04:23:52 +00:00

2842 lines
74 KiB
C
Raw Blame History

/* $FreeBSD$ */
/*
* Platform (FreeBSD) dependent common attachment code for Qlogic adapters.
*
* Copyright (c) 1997, 1998, 1999, 2000, 2001 by Matthew Jacob
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice immediately at the beginning of the file, without modification,
* this list of conditions, and the following disclaimer.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <dev/isp/isp_freebsd.h>
#include <sys/unistd.h>
#include <sys/kthread.h>
#include <machine/stdarg.h> /* for use by isp_prt below */
#include <sys/conf.h>
#include <sys/ioccom.h>
#include <dev/isp/isp_ioctl.h>
static d_ioctl_t ispioctl;
static void isp_intr_enable(void *);
static void isp_cam_async(void *, u_int32_t, struct cam_path *, void *);
static void isp_poll(struct cam_sim *);
#if 0
static void isp_relsim(void *);
#endif
static timeout_t isp_watchdog;
static void isp_kthread(void *);
static void isp_action(struct cam_sim *, union ccb *);
#define ISP_CDEV_MAJOR 248
static struct cdevsw isp_cdevsw = {
/* open */ nullopen,
/* close */ nullclose,
/* read */ noread,
/* write */ nowrite,
/* ioctl */ ispioctl,
/* poll */ nopoll,
/* mmap */ nommap,
/* strategy */ nostrategy,
/* name */ "isp",
/* maj */ ISP_CDEV_MAJOR,
/* dump */ nodump,
/* psize */ nopsize,
/* flags */ D_TAPE,
};
static struct ispsoftc *isplist = NULL;
void
isp_attach(struct ispsoftc *isp)
{
int primary, secondary;
struct ccb_setasync csa;
struct cam_devq *devq;
struct cam_sim *sim;
struct cam_path *path;
/*
* Establish (in case of 12X0) which bus is the primary.
*/
primary = 0;
secondary = 1;
/*
* Create the device queue for our SIM(s).
*/
devq = cam_simq_alloc(isp->isp_maxcmds);
if (devq == NULL) {
return;
}
/*
* Construct our SIM entry.
*/
ISPLOCK_2_CAMLOCK(isp);
sim = cam_sim_alloc(isp_action, isp_poll, "isp", isp,
device_get_unit(isp->isp_dev), 1, isp->isp_maxcmds, devq);
if (sim == NULL) {
cam_simq_free(devq);
CAMLOCK_2_ISPLOCK(isp);
return;
}
CAMLOCK_2_ISPLOCK(isp);
isp->isp_osinfo.ehook.ich_func = isp_intr_enable;
isp->isp_osinfo.ehook.ich_arg = isp;
ISPLOCK_2_CAMLOCK(isp);
if (config_intrhook_establish(&isp->isp_osinfo.ehook) != 0) {
cam_sim_free(sim, TRUE);
CAMLOCK_2_ISPLOCK(isp);
isp_prt(isp, ISP_LOGERR,
"could not establish interrupt enable hook");
return;
}
if (xpt_bus_register(sim, primary) != CAM_SUCCESS) {
cam_sim_free(sim, TRUE);
CAMLOCK_2_ISPLOCK(isp);
return;
}
if (xpt_create_path(&path, NULL, cam_sim_path(sim),
CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
xpt_bus_deregister(cam_sim_path(sim));
cam_sim_free(sim, TRUE);
config_intrhook_disestablish(&isp->isp_osinfo.ehook);
CAMLOCK_2_ISPLOCK(isp);
return;
}
xpt_setup_ccb(&csa.ccb_h, path, 5);
csa.ccb_h.func_code = XPT_SASYNC_CB;
csa.event_enable = AC_LOST_DEVICE;
csa.callback = isp_cam_async;
csa.callback_arg = sim;
xpt_action((union ccb *)&csa);
CAMLOCK_2_ISPLOCK(isp);
isp->isp_sim = sim;
isp->isp_path = path;
/*
* Create a kernel thread for fibre channel instances. We
* don't have dual channel FC cards.
*/
if (IS_FC(isp)) {
ISPLOCK_2_CAMLOCK(isp);
/* XXX: LOCK VIOLATION */
cv_init(&isp->isp_osinfo.kthread_cv, "isp_kthread_cv");
if (kthread_create(isp_kthread, isp, &isp->isp_osinfo.kproc,
RFHIGHPID, "%s: fc_thrd",
device_get_nameunit(isp->isp_dev))) {
xpt_bus_deregister(cam_sim_path(sim));
cam_sim_free(sim, TRUE);
config_intrhook_disestablish(&isp->isp_osinfo.ehook);
CAMLOCK_2_ISPLOCK(isp);
isp_prt(isp, ISP_LOGERR, "could not create kthread");
return;
}
CAMLOCK_2_ISPLOCK(isp);
}
/*
* If we have a second channel, construct SIM entry for that.
*/
if (IS_DUALBUS(isp)) {
ISPLOCK_2_CAMLOCK(isp);
sim = cam_sim_alloc(isp_action, isp_poll, "isp", isp,
device_get_unit(isp->isp_dev), 1, isp->isp_maxcmds, devq);
if (sim == NULL) {
xpt_bus_deregister(cam_sim_path(isp->isp_sim));
xpt_free_path(isp->isp_path);
cam_simq_free(devq);
config_intrhook_disestablish(&isp->isp_osinfo.ehook);
return;
}
if (xpt_bus_register(sim, secondary) != CAM_SUCCESS) {
xpt_bus_deregister(cam_sim_path(isp->isp_sim));
xpt_free_path(isp->isp_path);
cam_sim_free(sim, TRUE);
config_intrhook_disestablish(&isp->isp_osinfo.ehook);
CAMLOCK_2_ISPLOCK(isp);
return;
}
if (xpt_create_path(&path, NULL, cam_sim_path(sim),
CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
xpt_bus_deregister(cam_sim_path(isp->isp_sim));
xpt_free_path(isp->isp_path);
xpt_bus_deregister(cam_sim_path(sim));
cam_sim_free(sim, TRUE);
config_intrhook_disestablish(&isp->isp_osinfo.ehook);
CAMLOCK_2_ISPLOCK(isp);
return;
}
xpt_setup_ccb(&csa.ccb_h, path, 5);
csa.ccb_h.func_code = XPT_SASYNC_CB;
csa.event_enable = AC_LOST_DEVICE;
csa.callback = isp_cam_async;
csa.callback_arg = sim;
xpt_action((union ccb *)&csa);
CAMLOCK_2_ISPLOCK(isp);
isp->isp_sim2 = sim;
isp->isp_path2 = path;
}
/*
* Create device nodes
*/
(void) make_dev(&isp_cdevsw, device_get_unit(isp->isp_dev), UID_ROOT,
GID_OPERATOR, 0600, "%s", device_get_nameunit(isp->isp_dev));
if (isp->isp_role != ISP_ROLE_NONE) {
isp->isp_state = ISP_RUNSTATE;
ENABLE_INTS(isp);
}
if (isplist == NULL) {
isplist = isp;
} else {
struct ispsoftc *tmp = isplist;
while (tmp->isp_osinfo.next) {
tmp = tmp->isp_osinfo.next;
}
tmp->isp_osinfo.next = isp;
}
}
static int
ispioctl(dev_t dev, u_long cmd, caddr_t addr, int flags, struct proc *p)
{
struct ispsoftc *isp;
int retval = ENOTTY;
isp = isplist;
while (isp) {
if (minor(dev) == device_get_unit(isp->isp_dev)) {
break;
}
isp = isp->isp_osinfo.next;
}
if (isp == NULL)
return (ENXIO);
switch (cmd) {
case ISP_SDBLEV:
{
int olddblev = isp->isp_dblev;
isp->isp_dblev = *(int *)addr;
*(int *)addr = olddblev;
retval = 0;
break;
}
case ISP_RESETHBA:
ISP_LOCK(isp);
isp_reinit(isp);
ISP_UNLOCK(isp);
retval = 0;
break;
case ISP_FC_RESCAN:
if (IS_FC(isp)) {
ISP_LOCK(isp);
if (isp_fc_runstate(isp, 5 * 1000000)) {
retval = EIO;
} else {
retval = 0;
}
ISP_UNLOCK(isp);
}
break;
case ISP_FC_LIP:
if (IS_FC(isp)) {
ISP_LOCK(isp);
if (isp_control(isp, ISPCTL_SEND_LIP, 0)) {
retval = EIO;
} else {
retval = 0;
}
ISP_UNLOCK(isp);
}
break;
case ISP_FC_GETDINFO:
{
struct isp_fc_device *ifc = (struct isp_fc_device *) addr;
struct lportdb *lp;
if (ifc->loopid < 0 || ifc->loopid >= MAX_FC_TARG) {
retval = EINVAL;
break;
}
ISP_LOCK(isp);
lp = &FCPARAM(isp)->portdb[ifc->loopid];
if (lp->valid) {
ifc->loopid = lp->loopid;
ifc->portid = lp->portid;
ifc->node_wwn = lp->node_wwn;
ifc->port_wwn = lp->port_wwn;
retval = 0;
} else {
retval = ENODEV;
}
ISP_UNLOCK(isp);
break;
}
default:
break;
}
return (retval);
}
static void
isp_intr_enable(void *arg)
{
struct ispsoftc *isp = arg;
if (isp->isp_role != ISP_ROLE_NONE) {
ENABLE_INTS(isp);
isp->isp_osinfo.intsok = 1;
}
/* Release our hook so that the boot can continue. */
config_intrhook_disestablish(&isp->isp_osinfo.ehook);
}
/*
* Put the target mode functions here, because some are inlines
*/
#ifdef ISP_TARGET_MODE
static __inline int is_lun_enabled(struct ispsoftc *, int, lun_id_t);
static __inline int are_any_luns_enabled(struct ispsoftc *, int);
static __inline tstate_t *get_lun_statep(struct ispsoftc *, int, lun_id_t);
static __inline void rls_lun_statep(struct ispsoftc *, tstate_t *);
static __inline int isp_psema_sig_rqe(struct ispsoftc *);
static __inline int isp_cv_wait_timed_rqe(struct ispsoftc *, int);
static __inline void isp_cv_signal_rqe(struct ispsoftc *, int);
static __inline void isp_vsema_rqe(struct ispsoftc *);
static cam_status
create_lun_state(struct ispsoftc *, int, struct cam_path *, tstate_t **);
static void destroy_lun_state(struct ispsoftc *, tstate_t *);
static void isp_en_lun(struct ispsoftc *, union ccb *);
static cam_status isp_abort_tgt_ccb(struct ispsoftc *, union ccb *);
static timeout_t isp_refire_putback_atio;
static void isp_complete_ctio(union ccb *);
static void isp_target_putback_atio(union ccb *);
static cam_status isp_target_start_ctio(struct ispsoftc *, union ccb *);
static int isp_handle_platform_atio(struct ispsoftc *, at_entry_t *);
static int isp_handle_platform_atio2(struct ispsoftc *, at2_entry_t *);
static int isp_handle_platform_ctio(struct ispsoftc *, void *);
static __inline int
is_lun_enabled(struct ispsoftc *isp, int bus, lun_id_t lun)
{
tstate_t *tptr;
tptr = isp->isp_osinfo.lun_hash[LUN_HASH_FUNC(isp, bus, lun)];
if (tptr == NULL) {
ISP_UNLOCK(isp);
return (0);
}
do {
if (tptr->lun == (lun_id_t) lun && tptr->bus == bus) {
ISP_UNLOCK(isp);
return (1);
}
} while ((tptr = tptr->next) != NULL);
return (0);
}
static __inline int
are_any_luns_enabled(struct ispsoftc *isp, int port)
{
int lo, hi;
if (IS_DUALBUS(isp)) {
lo = (port * (LUN_HASH_SIZE >> 1));
hi = lo + (LUN_HASH_SIZE >> 1);
} else {
lo = 0;
hi = LUN_HASH_SIZE;
}
for (lo = 0; lo < hi; lo++) {
if (isp->isp_osinfo.lun_hash[lo]) {
return (1);
}
}
return (0);
}
static __inline tstate_t *
get_lun_statep(struct ispsoftc *isp, int bus, lun_id_t lun)
{
tstate_t *tptr;
if (lun == CAM_LUN_WILDCARD) {
tptr = &isp->isp_osinfo.tsdflt[bus];
tptr->hold++;
return (tptr);
} else {
tptr = isp->isp_osinfo.lun_hash[LUN_HASH_FUNC(isp, bus, lun)];
}
if (tptr == NULL) {
return (NULL);
}
do {
if (tptr->lun == lun && tptr->bus == bus) {
tptr->hold++;
return (tptr);
}
} while ((tptr = tptr->next) != NULL);
return (tptr);
}
static __inline void
rls_lun_statep(struct ispsoftc *isp, tstate_t *tptr)
{
if (tptr->hold)
tptr->hold--;
}
static __inline int
isp_psema_sig_rqe(struct ispsoftc *isp)
{
while (isp->isp_osinfo.tmflags & TM_BUSY) {
isp->isp_osinfo.tmflags |= TM_WANTED;
if (tsleep(&isp->isp_osinfo.tmflags, PRIBIO|PCATCH, "i0", 0)) {
return (-1);
}
isp->isp_osinfo.tmflags |= TM_BUSY;
}
return (0);
}
static __inline int
isp_cv_wait_timed_rqe(struct ispsoftc *isp, int timo)
{
if (tsleep(&isp->isp_osinfo.rstatus, PRIBIO, "qt1", timo)) {
ISP_UNLOCK(isp);
return (-1);
}
return (0);
}
static __inline void
isp_cv_signal_rqe(struct ispsoftc *isp, int status)
{
isp->isp_osinfo.rstatus = status;
wakeup(&isp->isp_osinfo.rstatus);
}
static __inline void
isp_vsema_rqe(struct ispsoftc *isp)
{
if (isp->isp_osinfo.tmflags & TM_WANTED) {
isp->isp_osinfo.tmflags &= ~TM_WANTED;
wakeup(&isp->isp_osinfo.tmflags);
}
isp->isp_osinfo.tmflags &= ~TM_BUSY;
}
static cam_status
create_lun_state(struct ispsoftc *isp, int bus,
struct cam_path *path, tstate_t **rslt)
{
cam_status status;
lun_id_t lun;
int hfx;
tstate_t *tptr, *new;
lun = xpt_path_lun_id(path);
if (lun < 0) {
return (CAM_LUN_INVALID);
}
if (is_lun_enabled(isp, bus, lun)) {
return (CAM_LUN_ALRDY_ENA);
}
new = (tstate_t *) malloc(sizeof (tstate_t), M_DEVBUF, M_NOWAIT|M_ZERO);
if (new == NULL) {
return (CAM_RESRC_UNAVAIL);
}
status = xpt_create_path(&new->owner, NULL, xpt_path_path_id(path),
xpt_path_target_id(path), xpt_path_lun_id(path));
if (status != CAM_REQ_CMP) {
free(new, M_DEVBUF);
return (status);
}
new->bus = bus;
new->lun = lun;
SLIST_INIT(&new->atios);
SLIST_INIT(&new->inots);
new->hold = 1;
hfx = LUN_HASH_FUNC(isp, new->bus, new->lun);
tptr = isp->isp_osinfo.lun_hash[hfx];
if (tptr == NULL) {
isp->isp_osinfo.lun_hash[hfx] = new;
} else {
while (tptr->next)
tptr = tptr->next;
tptr->next = new;
}
*rslt = new;
return (CAM_REQ_CMP);
}
static __inline void
destroy_lun_state(struct ispsoftc *isp, tstate_t *tptr)
{
int hfx;
tstate_t *lw, *pw;
hfx = LUN_HASH_FUNC(isp, tptr->bus, tptr->lun);
if (tptr->hold) {
return;
}
pw = isp->isp_osinfo.lun_hash[hfx];
if (pw == NULL) {
return;
} else if (pw->lun == tptr->lun && pw->bus == tptr->bus) {
isp->isp_osinfo.lun_hash[hfx] = pw->next;
} else {
lw = pw;
pw = lw->next;
while (pw) {
if (pw->lun == tptr->lun && pw->bus == tptr->bus) {
lw->next = pw->next;
break;
}
lw = pw;
pw = pw->next;
}
if (pw == NULL) {
ISP_UNLOCK(isp);
return;
}
}
free(tptr, M_DEVBUF);
}
/*
* we enter with our locks held.
*/
static void
isp_en_lun(struct ispsoftc *isp, union ccb *ccb)
{
const char lfmt[] = "Lun now %sabled for target mode on channel %d";
struct ccb_en_lun *cel = &ccb->cel;
tstate_t *tptr;
u_int16_t rstat;
int bus, cmd, frozen = 0;
lun_id_t lun;
target_id_t tgt;
bus = XS_CHANNEL(ccb) & 0x1;
tgt = ccb->ccb_h.target_id;
lun = ccb->ccb_h.target_lun;
/*
* Do some sanity checking first.
*/
if ((lun != CAM_LUN_WILDCARD) &&
(lun < 0 || lun >= (lun_id_t) isp->isp_maxluns)) {
ccb->ccb_h.status = CAM_LUN_INVALID;
return;
}
if (IS_SCSI(isp)) {
sdparam *sdp = isp->isp_param;
sdp += bus;
if (tgt != CAM_TARGET_WILDCARD &&
tgt != sdp->isp_initiator_id) {
ccb->ccb_h.status = CAM_TID_INVALID;
return;
}
} else {
if (tgt != CAM_TARGET_WILDCARD &&
tgt != FCPARAM(isp)->isp_iid) {
ccb->ccb_h.status = CAM_TID_INVALID;
return;
}
}
if (tgt == CAM_TARGET_WILDCARD) {
if (lun != CAM_LUN_WILDCARD) {
ccb->ccb_h.status = CAM_LUN_INVALID;
return;
}
}
/*
* If Fibre Channel, stop and drain all activity to this bus.
*/
#if 0
if (IS_FC(isp)) {
ISP_LOCK(isp);
frozen = 1;
xpt_freeze_simq(isp->isp_sim, 1);
isp->isp_osinfo.drain = 1;
while (isp->isp_osinfo.drain) {
(void) msleep(&isp->isp_osinfo.drain, &isp->isp_lock,
PRIBIO, "ispdrain", 10 * hz);
}
ISP_UNLOCK(isp);
}
#endif
/*
* Check to see if we're enabling on fibre channel and
* don't yet have a notion of who the heck we are (no
* loop yet).
*/
if (IS_FC(isp) && cel->enable &&
(isp->isp_osinfo.tmflags & TM_TMODE_ENABLED) == 0) {
fcparam *fcp = isp->isp_param;
int rv;
rv = isp_fc_runstate(isp, 2 * 1000000);
if (fcp->isp_fwstate != FW_READY ||
fcp->isp_loopstate != LOOP_READY) {
xpt_print_path(ccb->ccb_h.path);
isp_prt(isp, ISP_LOGWARN,
"could not get a good port database read");
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
if (frozen) {
ISPLOCK_2_CAMLOCK(isp);
xpt_release_simq(isp->isp_sim, 1);
CAMLOCK_2_ISPLOCK(isp);
}
return;
}
}
/*
* Next check to see whether this is a target/lun wildcard action.
*
* If so, we enable/disable target mode but don't do any lun enabling.
*/
if (lun == CAM_LUN_WILDCARD && tgt == CAM_TARGET_WILDCARD) {
int av = bus << 31;
tptr = &isp->isp_osinfo.tsdflt[bus];
if (cel->enable) {
if (isp->isp_osinfo.tmflags & (1 << bus)) {
ccb->ccb_h.status = CAM_LUN_ALRDY_ENA;
if (frozen) {
ISPLOCK_2_CAMLOCK(isp);
xpt_release_simq(isp->isp_sim, 1);
CAMLOCK_2_ISPLOCK(isp);
}
return;
}
ccb->ccb_h.status =
xpt_create_path(&tptr->owner, NULL,
xpt_path_path_id(ccb->ccb_h.path),
xpt_path_target_id(ccb->ccb_h.path),
xpt_path_lun_id(ccb->ccb_h.path));
if (ccb->ccb_h.status != CAM_REQ_CMP) {
if (frozen) {
ISPLOCK_2_CAMLOCK(isp);
xpt_release_simq(isp->isp_sim, 1);
CAMLOCK_2_ISPLOCK(isp);
}
return;
}
SLIST_INIT(&tptr->atios);
SLIST_INIT(&tptr->inots);
av |= ENABLE_TARGET_FLAG;
av = isp_control(isp, ISPCTL_TOGGLE_TMODE, &av);
if (av) {
ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
xpt_free_path(tptr->owner);
if (frozen) {
ISPLOCK_2_CAMLOCK(isp);
xpt_release_simq(isp->isp_sim, 1);
CAMLOCK_2_ISPLOCK(isp);
}
return;
}
isp->isp_osinfo.tmflags |= (1 << bus);
} else {
if ((isp->isp_osinfo.tmflags & (1 << bus)) == 0) {
ccb->ccb_h.status = CAM_LUN_INVALID;
if (frozen) {
ISPLOCK_2_CAMLOCK(isp);
xpt_release_simq(isp->isp_sim, 1);
CAMLOCK_2_ISPLOCK(isp);
}
return;
}
if (are_any_luns_enabled(isp, bus)) {
ccb->ccb_h.status = CAM_SCSI_BUSY;
if (frozen) {
ISPLOCK_2_CAMLOCK(isp);
xpt_release_simq(isp->isp_sim, 1);
CAMLOCK_2_ISPLOCK(isp);
}
return;
}
av = isp_control(isp, ISPCTL_TOGGLE_TMODE, &av);
if (av) {
ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
if (frozen) {
ISPLOCK_2_CAMLOCK(isp);
xpt_release_simq(isp->isp_sim, 1);
CAMLOCK_2_ISPLOCK(isp);
}
return;
}
isp->isp_osinfo.tmflags &= ~(1 << bus);
ccb->ccb_h.status = CAM_REQ_CMP;
}
xpt_print_path(ccb->ccb_h.path);
isp_prt(isp, ISP_LOGINFO, "Target Mode %sabled on channel %d",
(cel->enable) ? "en" : "dis", bus);
if (frozen) {
ISPLOCK_2_CAMLOCK(isp);
xpt_release_simq(isp->isp_sim, 1);
CAMLOCK_2_ISPLOCK(isp);
}
return;
}
/*
* We can move along now...
*/
if (frozen) {
ISPLOCK_2_CAMLOCK(isp);
xpt_release_simq(isp->isp_sim, 1);
CAMLOCK_2_ISPLOCK(isp);
}
if (cel->enable) {
ccb->ccb_h.status =
create_lun_state(isp, bus, ccb->ccb_h.path, &tptr);
if (ccb->ccb_h.status != CAM_REQ_CMP) {
return;
}
} else {
tptr = get_lun_statep(isp, bus, lun);
if (tptr == NULL) {
ccb->ccb_h.status = CAM_LUN_INVALID;
return;
}
}
if (isp_psema_sig_rqe(isp)) {
rls_lun_statep(isp, tptr);
if (cel->enable)
destroy_lun_state(isp, tptr);
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
return;
}
if (cel->enable) {
u_int32_t seq = isp->isp_osinfo.rollinfo++;
int c, n, ulun = lun;
cmd = RQSTYPE_ENABLE_LUN;
c = DFLT_CMND_CNT;
n = DFLT_INOT_CNT;
if (IS_FC(isp) && lun != 0) {
cmd = RQSTYPE_MODIFY_LUN;
n = 0;
/*
* For SCC firmware, we only deal with setting
* (enabling or modifying) lun 0.
*/
ulun = 0;
}
rstat = LUN_ERR;
if (isp_lun_cmd(isp, cmd, bus, tgt, ulun, c, n, seq)) {
xpt_print_path(ccb->ccb_h.path);
isp_prt(isp, ISP_LOGWARN, "isp_lun_cmd failed");
goto out;
}
if (isp_cv_wait_timed_rqe(isp, 30 * hz)) {
xpt_print_path(ccb->ccb_h.path);
isp_prt(isp, ISP_LOGERR,
"wait for ENABLE/MODIFY LUN timed out");
goto out;
}
rstat = isp->isp_osinfo.rstatus;
if (rstat != LUN_OK) {
xpt_print_path(ccb->ccb_h.path);
isp_prt(isp, ISP_LOGERR,
"ENABLE/MODIFY LUN returned 0x%x", rstat);
goto out;
}
} else {
int c, n, ulun = lun;
u_int32_t seq;
rstat = LUN_ERR;
seq = isp->isp_osinfo.rollinfo++;
cmd = -RQSTYPE_MODIFY_LUN;
c = DFLT_CMND_CNT;
n = DFLT_INOT_CNT;
if (IS_FC(isp) && lun != 0) {
n = 0;
/*
* For SCC firmware, we only deal with setting
* (enabling or modifying) lun 0.
*/
ulun = 0;
}
if (isp_lun_cmd(isp, cmd, bus, tgt, ulun, c, n, seq)) {
xpt_print_path(ccb->ccb_h.path);
isp_prt(isp, ISP_LOGERR, "isp_lun_cmd failed");
goto out;
}
if (isp_cv_wait_timed_rqe(isp, 30 * hz)) {
xpt_print_path(ccb->ccb_h.path);
isp_prt(isp, ISP_LOGERR,
"wait for MODIFY LUN timed out");
goto out;
}
rstat = isp->isp_osinfo.rstatus;
if (rstat != LUN_OK) {
xpt_print_path(ccb->ccb_h.path);
isp_prt(isp, ISP_LOGERR,
"MODIFY LUN returned 0x%x", rstat);
goto out;
}
if (IS_FC(isp) && lun) {
goto out;
}
seq = isp->isp_osinfo.rollinfo++;
rstat = LUN_ERR;
cmd = -RQSTYPE_ENABLE_LUN;
if (isp_lun_cmd(isp, cmd, bus, tgt, lun, 0, 0, seq)) {
xpt_print_path(ccb->ccb_h.path);
isp_prt(isp, ISP_LOGERR, "isp_lun_cmd failed");
goto out;
}
if (isp_cv_wait_timed_rqe(isp, 30 * hz)) {
xpt_print_path(ccb->ccb_h.path);
isp_prt(isp, ISP_LOGERR,
"wait for DISABLE LUN timed out");
goto out;
}
rstat = isp->isp_osinfo.rstatus;
if (rstat != LUN_OK) {
xpt_print_path(ccb->ccb_h.path);
isp_prt(isp, ISP_LOGWARN,
"DISABLE LUN returned 0x%x", rstat);
goto out;
}
}
out:
isp_vsema_rqe(isp);
if (rstat != LUN_OK) {
xpt_print_path(ccb->ccb_h.path);
isp_prt(isp, ISP_LOGWARN,
"lun %sable failed", (cel->enable) ? "en" : "dis");
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
rls_lun_statep(isp, tptr);
if (cel->enable)
destroy_lun_state(isp, tptr);
} else {
xpt_print_path(ccb->ccb_h.path);
isp_prt(isp, ISP_LOGINFO, lfmt,
(cel->enable) ? "en" : "dis", bus);
rls_lun_statep(isp, tptr);
if (cel->enable == 0) {
destroy_lun_state(isp, tptr);
}
ccb->ccb_h.status = CAM_REQ_CMP;
}
}
static cam_status
isp_abort_tgt_ccb(struct ispsoftc *isp, union ccb *ccb)
{
tstate_t *tptr;
struct ccb_hdr_slist *lp;
struct ccb_hdr *curelm;
int found;
union ccb *accb = ccb->cab.abort_ccb;
if (accb->ccb_h.target_id != CAM_TARGET_WILDCARD) {
if (IS_FC(isp) && (accb->ccb_h.target_id !=
((fcparam *) isp->isp_param)->isp_loopid)) {
return (CAM_PATH_INVALID);
} else if (IS_SCSI(isp) && (accb->ccb_h.target_id !=
((sdparam *) isp->isp_param)->isp_initiator_id)) {
return (CAM_PATH_INVALID);
}
}
tptr = get_lun_statep(isp, XS_CHANNEL(ccb), accb->ccb_h.target_lun);
if (tptr == NULL) {
return (CAM_PATH_INVALID);
}
if (accb->ccb_h.func_code == XPT_ACCEPT_TARGET_IO) {
lp = &tptr->atios;
} else if (accb->ccb_h.func_code == XPT_IMMED_NOTIFY) {
lp = &tptr->inots;
} else {
rls_lun_statep(isp, tptr);
return (CAM_UA_ABORT);
}
curelm = SLIST_FIRST(lp);
found = 0;
if (curelm == &accb->ccb_h) {
found = 1;
SLIST_REMOVE_HEAD(lp, sim_links.sle);
} else {
while(curelm != NULL) {
struct ccb_hdr *nextelm;
nextelm = SLIST_NEXT(curelm, sim_links.sle);
if (nextelm == &accb->ccb_h) {
found = 1;
SLIST_NEXT(curelm, sim_links.sle) =
SLIST_NEXT(nextelm, sim_links.sle);
break;
}
curelm = nextelm;
}
}
rls_lun_statep(isp, tptr);
if (found) {
accb->ccb_h.status = CAM_REQ_ABORTED;
return (CAM_REQ_CMP);
}
return(CAM_PATH_INVALID);
}
static cam_status
isp_target_start_ctio(struct ispsoftc *isp, union ccb *ccb)
{
void *qe;
struct ccb_scsiio *cso = &ccb->csio;
u_int16_t *hp, save_handle;
u_int16_t iptr, optr;
if (isp_getrqentry(isp, &iptr, &optr, &qe)) {
xpt_print_path(ccb->ccb_h.path);
printf("Request Queue Overflow in isp_target_start_ctio\n");
return (CAM_RESRC_UNAVAIL);
}
bzero(qe, QENTRY_LEN);
/*
* We're either moving data or completing a command here.
*/
if (IS_FC(isp)) {
struct ccb_accept_tio *atiop;
ct2_entry_t *cto = qe;
cto->ct_header.rqs_entry_type = RQSTYPE_CTIO2;
cto->ct_header.rqs_entry_count = 1;
cto->ct_iid = cso->init_id;
if (isp->isp_maxluns <= 16) {
cto->ct_lun = ccb->ccb_h.target_lun;
}
/*
* Start with a residual based on what the original datalength
* was supposed to be. Basically, we ignore what CAM has set
* for residuals. The data transfer routines will knock off
* the residual for each byte actually moved- and also will
* be responsible for setting the underrun flag.
*/
/* HACK! HACK! */
if ((atiop = ccb->ccb_h.periph_priv.entries[1].ptr) != NULL) {
cto->ct_resid = atiop->ccb_h.spriv_field0;
}
cto->ct_rxid = cso->tag_id;
if (cso->dxfer_len == 0) {
cto->ct_flags |= CT2_FLAG_MODE1 | CT2_NO_DATA;
if (ccb->ccb_h.flags & CAM_SEND_STATUS) {
cto->ct_flags |= CT2_SENDSTATUS;
cto->rsp.m1.ct_scsi_status = cso->scsi_status;
}
if ((ccb->ccb_h.flags & CAM_SEND_SENSE) != 0) {
int m = min(cso->sense_len, MAXRESPLEN);
bcopy(&cso->sense_data, cto->rsp.m1.ct_resp, m);
cto->rsp.m1.ct_senselen = m;
cto->rsp.m1.ct_scsi_status |= CT2_SNSLEN_VALID;
}
} else {
cto->ct_flags |= CT2_FLAG_MODE0;
if ((cso->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
cto->ct_flags |= CT2_DATA_IN;
} else {
cto->ct_flags |= CT2_DATA_OUT;
}
if ((ccb->ccb_h.flags & CAM_SEND_STATUS) != 0) {
cto->ct_flags |= CT2_SENDSTATUS;
cto->rsp.m0.ct_scsi_status = cso->scsi_status;
}
/*
* If we're sending data and status back together,
* we can't also send back sense data as well.
*/
ccb->ccb_h.flags &= ~CAM_SEND_SENSE;
}
if (cto->ct_flags & CT2_SENDSTATUS) {
isp_prt(isp, ISP_LOGTDEBUG1,
"CTIO2[%x] SCSI STATUS 0x%x datalength %u",
cto->ct_rxid, cso->scsi_status, cto->ct_resid);
}
if (cto->ct_flags & CT2_SENDSTATUS)
cto->ct_flags |= CT2_CCINCR;
cto->ct_timeout = 10;
hp = &cto->ct_syshandle;
} else {
ct_entry_t *cto = qe;
cto->ct_header.rqs_entry_type = RQSTYPE_CTIO;
cto->ct_header.rqs_entry_count = 1;
cto->ct_iid = cso->init_id;
cto->ct_iid |= XS_CHANNEL(ccb) << 7;
cto->ct_tgt = ccb->ccb_h.target_id;
cto->ct_lun = ccb->ccb_h.target_lun;
cto->ct_fwhandle = AT_GET_HANDLE(cso->tag_id);
if (AT_HAS_TAG(cso->tag_id)) {
cto->ct_tag_val = (u_int8_t) AT_GET_TAG(cso->tag_id);
cto->ct_flags |= CT_TQAE;
}
if (ccb->ccb_h.flags & CAM_DIS_DISCONNECT) {
cto->ct_flags |= CT_NODISC;
}
if (cso->dxfer_len == 0) {
cto->ct_flags |= CT_NO_DATA;
} else if ((cso->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
cto->ct_flags |= CT_DATA_IN;
} else {
cto->ct_flags |= CT_DATA_OUT;
}
if (ccb->ccb_h.flags & CAM_SEND_STATUS) {
cto->ct_flags |= CT_SENDSTATUS;
cto->ct_scsi_status = cso->scsi_status;
cto->ct_resid = cso->resid;
}
if (cto->ct_flags & CT_SENDSTATUS) {
isp_prt(isp, ISP_LOGTDEBUG1,
"CTIO[%x] SCSI STATUS 0x%x resid %d tag_id %x",
cto->ct_fwhandle, cso->scsi_status, cso->resid,
cso->tag_id);
}
cto->ct_timeout = 10;
hp = &cto->ct_syshandle;
ccb->ccb_h.flags &= ~CAM_SEND_SENSE;
if (cto->ct_flags & CT_SENDSTATUS)
cto->ct_flags |= CT_CCINCR;
}
if (isp_save_xs(isp, (XS_T *)ccb, hp)) {
xpt_print_path(ccb->ccb_h.path);
printf("No XFLIST pointers for isp_target_start_ctio\n");
return (CAM_RESRC_UNAVAIL);
}
/*
* Call the dma setup routines for this entry (and any subsequent
* CTIOs) if there's data to move, and then tell the f/w it's got
* new things to play with. As with isp_start's usage of DMA setup,
* any swizzling is done in the machine dependent layer. Because
* of this, we put the request onto the queue area first in native
* format.
*/
save_handle = *hp;
switch (ISP_DMASETUP(isp, cso, qe, &iptr, optr)) {
case CMD_QUEUED:
ISP_ADD_REQUEST(isp, iptr);
return (CAM_REQ_INPROG);
case CMD_EAGAIN:
ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
isp_destroy_handle(isp, save_handle);
return (CAM_RESRC_UNAVAIL);
default:
isp_destroy_handle(isp, save_handle);
return (XS_ERR(ccb));
}
}
static void
isp_refire_putback_atio(void *arg)
{
int s = splcam();
isp_target_putback_atio(arg);
splx(s);
}
static void
isp_target_putback_atio(union ccb *ccb)
{
struct ispsoftc *isp;
struct ccb_scsiio *cso;
u_int16_t iptr, optr;
void *qe;
isp = XS_ISP(ccb);
if (isp_getrqentry(isp, &iptr, &optr, &qe)) {
(void) timeout(isp_refire_putback_atio, ccb, 10);
isp_prt(isp, ISP_LOGWARN,
"isp_target_putback_atio: Request Queue Overflow");
return;
}
bzero(qe, QENTRY_LEN);
cso = &ccb->csio;
if (IS_FC(isp)) {
at2_entry_t *at = qe;
at->at_header.rqs_entry_type = RQSTYPE_ATIO2;
at->at_header.rqs_entry_count = 1;
if (isp->isp_maxluns > 16) {
at->at_scclun = (uint16_t) ccb->ccb_h.target_lun;
} else {
at->at_lun = (uint8_t) ccb->ccb_h.target_lun;
}
at->at_status = CT_OK;
at->at_rxid = cso->tag_id;
ISP_SWIZ_ATIO2(isp, qe, qe);
} else {
at_entry_t *at = qe;
at->at_header.rqs_entry_type = RQSTYPE_ATIO;
at->at_header.rqs_entry_count = 1;
at->at_iid = cso->init_id;
at->at_iid |= XS_CHANNEL(ccb) << 7;
at->at_tgt = cso->ccb_h.target_id;
at->at_lun = cso->ccb_h.target_lun;
at->at_status = CT_OK;
at->at_tag_val = AT_GET_TAG(cso->tag_id);
at->at_handle = AT_GET_HANDLE(cso->tag_id);
ISP_SWIZ_ATIO(isp, qe, qe);
}
ISP_TDQE(isp, "isp_target_putback_atio", (int) optr, qe);
ISP_ADD_REQUEST(isp, iptr);
isp_complete_ctio(ccb);
}
static void
isp_complete_ctio(union ccb *ccb)
{
struct ispsoftc *isp = XS_ISP(ccb);
if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG) {
ccb->ccb_h.status |= CAM_REQ_CMP;
}
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
if (isp->isp_osinfo.simqfrozen & SIMQFRZ_RESOURCE) {
isp->isp_osinfo.simqfrozen &= ~SIMQFRZ_RESOURCE;
if (isp->isp_osinfo.simqfrozen == 0) {
if ((ccb->ccb_h.status & CAM_DEV_QFRZN) == 0) {
isp_prt(isp, ISP_LOGDEBUG2, "ctio->relsimq");
ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
} else {
isp_prt(isp, ISP_LOGWARN, "ctio->devqfrozen");
}
} else {
isp_prt(isp, ISP_LOGWARN,
"ctio->simqfrozen(%x)", isp->isp_osinfo.simqfrozen);
}
}
xpt_done(ccb);
}
/*
* Handle ATIO stuff that the generic code can't.
* This means handling CDBs.
*/
static int
isp_handle_platform_atio(struct ispsoftc *isp, at_entry_t *aep)
{
tstate_t *tptr;
int status, bus;
struct ccb_accept_tio *atiop;
/*
* The firmware status (except for the QLTM_SVALID bit)
* indicates why this ATIO was sent to us.
*
* If QLTM_SVALID is set, the firware has recommended Sense Data.
*
* If the DISCONNECTS DISABLED bit is set in the flags field,
* we're still connected on the SCSI bus.
*/
status = aep->at_status;
if ((status & ~QLTM_SVALID) == AT_PHASE_ERROR) {
/*
* Bus Phase Sequence error. We should have sense data
* suggested by the f/w. I'm not sure quite yet what
* to do about this for CAM.
*/
isp_prt(isp, ISP_LOGWARN, "PHASE ERROR");
isp_endcmd(isp, aep, SCSI_STATUS_BUSY, 0);
return (0);
}
if ((status & ~QLTM_SVALID) != AT_CDB) {
isp_prt(isp, ISP_LOGWARN, "bad atio (0x%x) leaked to platform",
status);
isp_endcmd(isp, aep, SCSI_STATUS_BUSY, 0);
return (0);
}
bus = GET_BUS_VAL(aep->at_iid);
tptr = get_lun_statep(isp, bus, aep->at_lun);
if (tptr == NULL) {
tptr = get_lun_statep(isp, bus, CAM_LUN_WILDCARD);
}
if (tptr == NULL) {
/*
* Because we can't autofeed sense data back with
* a command for parallel SCSI, we can't give back
* a CHECK CONDITION. We'll give back a BUSY status
* instead. This works out okay because the only
* time we should, in fact, get this, is in the
* case that somebody configured us without the
* blackhole driver, so they get what they deserve.
*/
isp_endcmd(isp, aep, SCSI_STATUS_BUSY, 0);
return (0);
}
atiop = (struct ccb_accept_tio *) SLIST_FIRST(&tptr->atios);
if (atiop == NULL) {
/*
* Because we can't autofeed sense data back with
* a command for parallel SCSI, we can't give back
* a CHECK CONDITION. We'll give back a QUEUE FULL status
* instead. This works out okay because the only time we
* should, in fact, get this, is in the case that we've
* run out of ATIOS.
*/
xpt_print_path(tptr->owner);
isp_prt(isp, ISP_LOGWARN,
"no ATIOS for lun %d from initiator %d on channel %d",
aep->at_lun, GET_IID_VAL(aep->at_iid), bus);
rls_lun_statep(isp, tptr);
if (aep->at_flags & AT_TQAE)
isp_endcmd(isp, aep, SCSI_STATUS_QUEUE_FULL, 0);
else
isp_endcmd(isp, aep, SCSI_STATUS_BUSY, 0);
return (0);
}
SLIST_REMOVE_HEAD(&tptr->atios, sim_links.sle);
if (tptr == &isp->isp_osinfo.tsdflt[bus]) {
atiop->ccb_h.target_id = aep->at_tgt;
atiop->ccb_h.target_lun = aep->at_lun;
}
if (aep->at_flags & AT_NODISC) {
atiop->ccb_h.flags = CAM_DIS_DISCONNECT;
} else {
atiop->ccb_h.flags = 0;
}
if (status & QLTM_SVALID) {
size_t amt = imin(QLTM_SENSELEN, sizeof (atiop->sense_data));
atiop->sense_len = amt;
MEMCPY(&atiop->sense_data, aep->at_sense, amt);
} else {
atiop->sense_len = 0;
}
atiop->init_id = GET_IID_VAL(aep->at_iid);
atiop->cdb_len = aep->at_cdblen;
MEMCPY(atiop->cdb_io.cdb_bytes, aep->at_cdb, aep->at_cdblen);
atiop->ccb_h.status = CAM_CDB_RECVD;
/*
* Construct a tag 'id' based upon tag value (which may be 0..255)
* and the handle (which we have to preserve).
*/
AT_MAKE_TAGID(atiop->tag_id, aep);
if (aep->at_flags & AT_TQAE) {
atiop->tag_action = aep->at_tag_type;
atiop->ccb_h.status |= CAM_TAG_ACTION_VALID;
}
xpt_done((union ccb*)atiop);
isp_prt(isp, ISP_LOGTDEBUG1,
"ATIO[%x] CDB=0x%x bus %d iid%d->lun%d tag 0x%x ttype 0x%x %s",
aep->at_handle, aep->at_cdb[0] & 0xff, GET_BUS_VAL(aep->at_iid),
GET_IID_VAL(aep->at_iid), aep->at_lun, aep->at_tag_val & 0xff,
aep->at_tag_type, (aep->at_flags & AT_NODISC)?
"nondisc" : "disconnecting");
rls_lun_statep(isp, tptr);
return (0);
}
static int
isp_handle_platform_atio2(struct ispsoftc *isp, at2_entry_t *aep)
{
lun_id_t lun;
tstate_t *tptr;
struct ccb_accept_tio *atiop;
/*
* The firmware status (except for the QLTM_SVALID bit)
* indicates why this ATIO was sent to us.
*
* If QLTM_SVALID is set, the firware has recommended Sense Data.
*/
if ((aep->at_status & ~QLTM_SVALID) != AT_CDB) {
isp_prt(isp, ISP_LOGWARN,
"bogus atio (0x%x) leaked to platform", aep->at_status);
isp_endcmd(isp, aep, SCSI_STATUS_BUSY, 0);
return (0);
}
if (isp->isp_maxluns > 16) {
lun = aep->at_scclun;
} else {
lun = aep->at_lun;
}
tptr = get_lun_statep(isp, 0, lun);
if (tptr == NULL) {
tptr = get_lun_statep(isp, 0, CAM_LUN_WILDCARD);
}
if (tptr == NULL) {
/*
* What we'd like to know is whether or not we have a listener
* upstream that really hasn't configured yet. If we do, then
* we can give a more sensible reply here. If not, then we can
* reject this out of hand.
*
* Choices for what to send were
*
* Not Ready, Unit Not Self-Configured Yet
* (0x2,0x3e,0x00)
*
* for the former and
*
* Illegal Request, Logical Unit Not Supported
* (0x5,0x25,0x00)
*
* for the latter.
*
* We used to decide whether there was at least one listener
* based upon whether the black hole driver was configured.
* However, recent config(8) changes have made this hard to do
* at this time.
*
*/
u_int32_t ccode = SCSI_STATUS_BUSY;
/*
* Because we can't autofeed sense data back with
* a command for parallel SCSI, we can't give back
* a CHECK CONDITION. We'll give back a BUSY status
* instead. This works out okay because the only
* time we should, in fact, get this, is in the
* case that somebody configured us without the
* blackhole driver, so they get what they deserve.
*/
isp_endcmd(isp, aep, ccode, 0);
return (0);
}
atiop = (struct ccb_accept_tio *) SLIST_FIRST(&tptr->atios);
if (atiop == NULL) {
/*
* Because we can't autofeed sense data back with
* a command for parallel SCSI, we can't give back
* a CHECK CONDITION. We'll give back a QUEUE FULL status
* instead. This works out okay because the only time we
* should, in fact, get this, is in the case that we've
* run out of ATIOS.
*/
xpt_print_path(tptr->owner);
isp_prt(isp, ISP_LOGWARN,
"no ATIOS for lun %d from initiator %d", lun, aep->at_iid);
rls_lun_statep(isp, tptr);
if (aep->at_flags & AT_TQAE)
isp_endcmd(isp, aep, SCSI_STATUS_QUEUE_FULL, 0);
else
isp_endcmd(isp, aep, SCSI_STATUS_BUSY, 0);
return (0);
}
SLIST_REMOVE_HEAD(&tptr->atios, sim_links.sle);
if (tptr == &isp->isp_osinfo.tsdflt[0]) {
atiop->ccb_h.target_id =
((fcparam *)isp->isp_param)->isp_loopid;
atiop->ccb_h.target_lun = lun;
}
/*
* We don't get 'suggested' sense data as we do with SCSI cards.
*/
atiop->sense_len = 0;
atiop->init_id = aep->at_iid;
atiop->cdb_len = ATIO2_CDBLEN;
MEMCPY(atiop->cdb_io.cdb_bytes, aep->at_cdb, ATIO2_CDBLEN);
atiop->ccb_h.status = CAM_CDB_RECVD;
atiop->tag_id = aep->at_rxid;
switch (aep->at_taskflags & ATIO2_TC_ATTR_MASK) {
case ATIO2_TC_ATTR_SIMPLEQ:
atiop->tag_action = MSG_SIMPLE_Q_TAG;
break;
case ATIO2_TC_ATTR_HEADOFQ:
atiop->tag_action = MSG_HEAD_OF_Q_TAG;
break;
case ATIO2_TC_ATTR_ORDERED:
atiop->tag_action = MSG_ORDERED_Q_TAG;
break;
case ATIO2_TC_ATTR_ACAQ: /* ?? */
case ATIO2_TC_ATTR_UNTAGGED:
default:
atiop->tag_action = 0;
break;
}
if (atiop->tag_action != 0) {
atiop->ccb_h.status |= CAM_TAG_ACTION_VALID;
}
/*
* Preserve overall command datalength in private field.
*/
atiop->ccb_h.spriv_field0 = aep->at_datalen;
xpt_done((union ccb*)atiop);
isp_prt(isp, ISP_LOGTDEBUG1,
"ATIO2[%x] CDB=0x%x iid%d->lun%d tattr 0x%x datalen %u",
aep->at_rxid, aep->at_cdb[0] & 0xff, aep->at_iid,
lun, aep->at_taskflags, aep->at_datalen);
rls_lun_statep(isp, tptr);
return (0);
}
static int
isp_handle_platform_ctio(struct ispsoftc *isp, void *arg)
{
union ccb *ccb;
int sentstatus, ok, notify_cam, resid = 0;
/*
* CTIO and CTIO2 are close enough....
*/
ccb = (union ccb *) isp_find_xs(isp, ((ct_entry_t *)arg)->ct_syshandle);
KASSERT((ccb != NULL), ("null ccb in isp_handle_platform_ctio"));
isp_destroy_handle(isp, ((ct_entry_t *)arg)->ct_syshandle);
if (IS_FC(isp)) {
ct2_entry_t *ct = arg;
sentstatus = ct->ct_flags & CT2_SENDSTATUS;
ok = (ct->ct_status & ~QLTM_SVALID) == CT_OK;
if (ok && sentstatus && (ccb->ccb_h.flags & CAM_SEND_SENSE)) {
ccb->ccb_h.status |= CAM_SENT_SENSE;
}
isp_prt(isp, ISP_LOGTDEBUG1,
"CTIO2[%x] sts 0x%x flg 0x%x sns %d %s",
ct->ct_rxid, ct->ct_status, ct->ct_flags,
(ccb->ccb_h.status & CAM_SENT_SENSE) != 0,
sentstatus? "FIN" : "MID");
notify_cam = ct->ct_header.rqs_seqno & 0x1;
if ((ct->ct_flags & CT2_DATAMASK) != CT2_NO_DATA) {
resid = ct->ct_resid;
}
} else {
ct_entry_t *ct = arg;
sentstatus = ct->ct_flags & CT_SENDSTATUS;
ok = (ct->ct_status & ~QLTM_SVALID) == CT_OK;
isp_prt(isp, ISP_LOGTDEBUG1,
"CTIO[%x] tag %x iid %x tgt %d lun %d sts 0x%x flg %x %s",
ct->ct_fwhandle, ct->ct_tag_val, ct->ct_iid, ct->ct_tgt,
ct->ct_lun, ct->ct_status, ct->ct_flags,
sentstatus? "FIN" : "MID");
/*
* We *ought* to be able to get back to the original ATIO
* here, but for some reason this gets lost. It's just as
* well because it's squirrelled away as part of periph
* private data.
*
* We can live without it as long as we continue to use
* the auto-replenish feature for CTIOs.
*/
notify_cam = ct->ct_header.rqs_seqno & 0x1;
if (ct->ct_status & QLTM_SVALID) {
char *sp = (char *)ct;
sp += CTIO_SENSE_OFFSET;
ccb->csio.sense_len =
min(sizeof (ccb->csio.sense_data), QLTM_SENSELEN);
MEMCPY(&ccb->csio.sense_data, sp, ccb->csio.sense_len);
ccb->ccb_h.status |= CAM_AUTOSNS_VALID;
}
if ((ct->ct_flags & CT_DATAMASK) != CT_NO_DATA) {
resid = ct->ct_resid;
}
}
ccb->csio.resid += resid;
/*
* We're here either because intermediate data transfers are done
* and/or the final status CTIO (which may have joined with a
* Data Transfer) is done.
*
* In any case, for this platform, the upper layers figure out
* what to do next, so all we do here is collect status and
* pass information along. Any DMA handles have already been
* freed.
*/
if (notify_cam == 0) {
isp_prt(isp, ISP_LOGTDEBUG0, " INTER CTIO done");
return (0);
}
isp_prt(isp, ISP_LOGTDEBUG0, "%s CTIO done (resid %d)",
(sentstatus)? " FINAL " : "MIDTERM ", ccb->csio.resid);
if (!ok) {
isp_target_putback_atio(ccb);
} else {
isp_complete_ctio(ccb);
}
return (0);
}
#endif
static void
isp_cam_async(void *cbarg, u_int32_t code, struct cam_path *path, void *arg)
{
struct cam_sim *sim;
struct ispsoftc *isp;
sim = (struct cam_sim *)cbarg;
isp = (struct ispsoftc *) cam_sim_softc(sim);
switch (code) {
case AC_LOST_DEVICE:
if (IS_SCSI(isp)) {
u_int16_t oflags, nflags;
sdparam *sdp = isp->isp_param;
int tgt;
tgt = xpt_path_target_id(path);
ISP_LOCK(isp);
sdp += cam_sim_bus(sim);
#ifndef ISP_TARGET_MODE
if (tgt == sdp->isp_initiator_id) {
nflags = DPARM_DEFAULT;
} else {
nflags = DPARM_SAFE_DFLT;
if (isp->isp_loaded_fw) {
nflags |= DPARM_NARROW | DPARM_ASYNC;
}
}
#else
nflags = DPARM_DEFAULT;
#endif
oflags = sdp->isp_devparam[tgt].dev_flags;
sdp->isp_devparam[tgt].dev_flags = nflags;
sdp->isp_devparam[tgt].dev_update = 1;
isp->isp_update |= (1 << cam_sim_bus(sim));
(void) isp_control(isp, ISPCTL_UPDATE_PARAMS, NULL);
sdp->isp_devparam[tgt].dev_flags = oflags;
ISP_UNLOCK(isp);
}
break;
default:
isp_prt(isp, ISP_LOGWARN, "isp_cam_async: Code 0x%x", code);
break;
}
}
static void
isp_poll(struct cam_sim *sim)
{
struct ispsoftc *isp = cam_sim_softc(sim);
ISP_LOCK(isp);
(void) isp_intr(isp);
ISP_UNLOCK(isp);
}
#if 0
static void
isp_relsim(void *arg)
{
struct ispsoftc *isp = arg;
ISP_LOCK(isp);
if (isp->isp_osinfo.simqfrozen & SIMQFRZ_TIMED) {
int wasfrozen = isp->isp_osinfo.simqfrozen & SIMQFRZ_TIMED;
isp->isp_osinfo.simqfrozen &= ~SIMQFRZ_TIMED;
if (wasfrozen && isp->isp_osinfo.simqfrozen == 0) {
xpt_release_simq(isp->isp_sim, 1);
isp_prt(isp, ISP_LOGDEBUG2, "timed relsimq");
}
}
ISP_UNLOCK(isp);
}
#endif
static void
isp_watchdog(void *arg)
{
XS_T *xs = arg;
struct ispsoftc *isp = XS_ISP(xs);
u_int32_t handle;
/*
* We've decided this command is dead. Make sure we're not trying
* to kill a command that's already dead by getting it's handle and
* and seeing whether it's still alive.
*/
ISP_LOCK(isp);
handle = isp_find_handle(isp, xs);
if (handle) {
u_int16_t r;
if (XS_CMD_DONE_P(xs)) {
isp_prt(isp, ISP_LOGDEBUG1,
"watchdog found done cmd (handle 0x%x)", handle);
ISP_UNLOCK(isp);
return;
}
if (XS_CMD_WDOG_P(xs)) {
isp_prt(isp, ISP_LOGDEBUG2,
"recursive watchdog (handle 0x%x)", handle);
ISP_UNLOCK(isp);
return;
}
XS_CMD_S_WDOG(xs);
r = ISP_READ(isp, BIU_ISR);
if (INT_PENDING(isp, r) && isp_intr(isp) && XS_CMD_DONE_P(xs)) {
isp_prt(isp, ISP_LOGDEBUG2,
"watchdog cleanup (%x, %x)", handle, r);
xpt_done((union ccb *) xs);
} else if (XS_CMD_GRACE_P(xs)) {
/*
* Make sure the command is *really* dead before we
* release the handle (and DMA resources) for reuse.
*/
(void) isp_control(isp, ISPCTL_ABORT_CMD, arg);
/*
* After this point, the comamnd is really dead.
*/
if (XS_XFRLEN(xs)) {
ISP_DMAFREE(isp, xs, handle);
}
isp_destroy_handle(isp, handle);
xpt_print_path(xs->ccb_h.path);
isp_prt(isp, ISP_LOGWARN,
"watchdog timeout (%x, %x)", handle, r);
XS_SETERR(xs, CAM_CMD_TIMEOUT);
XS_CMD_C_WDOG(xs);
isp_done(xs);
} else {
u_int16_t iptr, optr;
ispreq_t *mp;
XS_CMD_C_WDOG(xs);
xs->ccb_h.timeout_ch = timeout(isp_watchdog, xs, hz);
if (isp_getrqentry(isp, &iptr, &optr, (void **) &mp)) {
ISP_UNLOCK(isp);
return;
}
XS_CMD_S_GRACE(xs);
MEMZERO((void *) mp, sizeof (*mp));
mp->req_header.rqs_entry_count = 1;
mp->req_header.rqs_entry_type = RQSTYPE_MARKER;
mp->req_modifier = SYNC_ALL;
mp->req_target = XS_CHANNEL(xs) << 7;
ISP_SWIZZLE_REQUEST(isp, mp);
ISP_ADD_REQUEST(isp, iptr);
}
} else {
isp_prt(isp, ISP_LOGDEBUG2, "watchdog with no command");
}
ISP_UNLOCK(isp);
}
static int isp_ktmature = 0;
static void
isp_kthread(void *arg)
{
int wasfrozen;
struct ispsoftc *isp = arg;
mtx_lock(&isp->isp_lock);
for (;;) {
isp_prt(isp, ISP_LOGDEBUG0, "kthread checking FC state");
while (isp_fc_runstate(isp, 2 * 1000000) != 0) {
if (FCPARAM(isp)->isp_fwstate != FW_READY ||
FCPARAM(isp)->isp_loopstate < LOOP_PDB_RCVD) {
if (FCPARAM(isp)->loop_seen_once == 0 ||
isp_ktmature == 0) {
break;
}
}
msleep(isp_kthread, &isp->isp_lock,
PRIBIO, "isp_fcthrd", hz);
}
/*
* Even if we didn't get good loop state we may be
* unfreezing the SIMQ so that we can kill off
* commands (if we've never seen loop before, e.g.)
*/
isp_ktmature = 1;
wasfrozen = isp->isp_osinfo.simqfrozen & SIMQFRZ_LOOPDOWN;
isp->isp_osinfo.simqfrozen &= ~SIMQFRZ_LOOPDOWN;
if (wasfrozen && isp->isp_osinfo.simqfrozen == 0) {
isp_prt(isp, ISP_LOGDEBUG0, "kthread up release simq");
ISPLOCK_2_CAMLOCK(isp);
xpt_release_simq(isp->isp_sim, 1);
CAMLOCK_2_ISPLOCK(isp);
}
cv_wait(&isp->isp_osinfo.kthread_cv, &isp->isp_lock);
}
}
static void
isp_action(struct cam_sim *sim, union ccb *ccb)
{
int bus, tgt, error;
struct ispsoftc *isp;
struct ccb_trans_settings *cts;
CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("isp_action\n"));
isp = (struct ispsoftc *)cam_sim_softc(sim);
ccb->ccb_h.sim_priv.entries[0].field = 0;
ccb->ccb_h.sim_priv.entries[1].ptr = isp;
if (isp->isp_state != ISP_RUNSTATE &&
ccb->ccb_h.func_code == XPT_SCSI_IO) {
CAMLOCK_2_ISPLOCK(isp);
isp_init(isp);
if (isp->isp_state != ISP_INITSTATE) {
ISP_UNLOCK(isp);
/*
* Lie. Say it was a selection timeout.
*/
ccb->ccb_h.status = CAM_SEL_TIMEOUT | CAM_DEV_QFRZN;
xpt_freeze_devq(ccb->ccb_h.path, 1);
xpt_done(ccb);
return;
}
isp->isp_state = ISP_RUNSTATE;
ISPLOCK_2_CAMLOCK(isp);
}
isp_prt(isp, ISP_LOGDEBUG2, "isp_action code %x", ccb->ccb_h.func_code);
switch (ccb->ccb_h.func_code) {
case XPT_SCSI_IO: /* Execute the requested I/O operation */
/*
* Do a couple of preliminary checks...
*/
if ((ccb->ccb_h.flags & CAM_CDB_POINTER) != 0) {
if ((ccb->ccb_h.flags & CAM_CDB_PHYS) != 0) {
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
}
#ifdef DIAGNOSTIC
if (ccb->ccb_h.target_id > (ISP_MAX_TARGETS(isp) - 1)) {
ccb->ccb_h.status = CAM_PATH_INVALID;
} else if (ccb->ccb_h.target_lun > (ISP_MAX_LUNS(isp) - 1)) {
ccb->ccb_h.status = CAM_PATH_INVALID;
}
if (ccb->ccb_h.status == CAM_PATH_INVALID) {
isp_prt(isp, ISP_LOGERR,
"invalid tgt/lun (%d.%d) in XPT_SCSI_IO",
ccb->ccb_h.target_id, ccb->ccb_h.target_lun);
xpt_done(ccb);
break;
}
#endif
((struct ccb_scsiio *) ccb)->scsi_status = SCSI_STATUS_OK;
CAMLOCK_2_ISPLOCK(isp);
error = isp_start((XS_T *) ccb);
switch (error) {
case CMD_QUEUED:
ccb->ccb_h.status |= CAM_SIM_QUEUED;
if (ccb->ccb_h.timeout != CAM_TIME_INFINITY) {
u_int64_t ticks = (u_int64_t) hz;
if (ccb->ccb_h.timeout == CAM_TIME_DEFAULT)
ticks = 60 * 1000 * ticks;
else
ticks = ccb->ccb_h.timeout * hz;
ticks = ((ticks + 999) / 1000) + hz + hz;
if (ticks >= 0x80000000) {
isp_prt(isp, ISP_LOGERR,
"timeout overflow");
ticks = 0x80000000;
}
ccb->ccb_h.timeout_ch = timeout(isp_watchdog,
(caddr_t)ccb, (int)ticks);
} else {
callout_handle_init(&ccb->ccb_h.timeout_ch);
}
ISPLOCK_2_CAMLOCK(isp);
break;
case CMD_RQLATER:
/*
* This can only happen for Fibre Channel
*/
KASSERT((IS_FC(isp)), ("CMD_RQLATER for FC only"));
if (FCPARAM(isp)->loop_seen_once == 0 && isp_ktmature) {
ISPLOCK_2_CAMLOCK(isp);
XS_SETERR(ccb, CAM_SEL_TIMEOUT);
xpt_done(ccb);
break;
}
cv_signal(&isp->isp_osinfo.kthread_cv);
if (isp->isp_osinfo.simqfrozen == 0) {
isp_prt(isp, ISP_LOGDEBUG2,
"RQLATER freeze simq");
isp->isp_osinfo.simqfrozen |= SIMQFRZ_LOOPDOWN;
ISPLOCK_2_CAMLOCK(isp);
xpt_freeze_simq(sim, 1);
} else {
ISPLOCK_2_CAMLOCK(isp);
}
XS_SETERR(ccb, CAM_REQUEUE_REQ);
xpt_done(ccb);
break;
case CMD_EAGAIN:
if (isp->isp_osinfo.simqfrozen == 0) {
xpt_freeze_simq(sim, 1);
isp_prt(isp, ISP_LOGDEBUG2,
"EAGAIN freeze simq");
}
isp->isp_osinfo.simqfrozen |= SIMQFRZ_RESOURCE;
XS_SETERR(ccb, CAM_REQUEUE_REQ);
ISPLOCK_2_CAMLOCK(isp);
xpt_done(ccb);
break;
case CMD_COMPLETE:
isp_done((struct ccb_scsiio *) ccb);
ISPLOCK_2_CAMLOCK(isp);
break;
default:
isp_prt(isp, ISP_LOGERR,
"What's this? 0x%x at %d in file %s",
error, __LINE__, __FILE__);
XS_SETERR(ccb, CAM_REQ_CMP_ERR);
xpt_done(ccb);
ISPLOCK_2_CAMLOCK(isp);
}
break;
#ifdef ISP_TARGET_MODE
case XPT_EN_LUN: /* Enable LUN as a target */
CAMLOCK_2_ISPLOCK(isp);
isp_en_lun(isp, ccb);
ISPLOCK_2_CAMLOCK(isp);
xpt_done(ccb);
break;
case XPT_NOTIFY_ACK: /* recycle notify ack */
case XPT_IMMED_NOTIFY: /* Add Immediate Notify Resource */
case XPT_ACCEPT_TARGET_IO: /* Add Accept Target IO Resource */
{
tstate_t *tptr =
get_lun_statep(isp, XS_CHANNEL(ccb), ccb->ccb_h.target_lun);
if (tptr == NULL) {
ccb->ccb_h.status = CAM_LUN_INVALID;
xpt_done(ccb);
break;
}
ccb->ccb_h.sim_priv.entries[0].field = 0;
ccb->ccb_h.sim_priv.entries[1].ptr = isp;
CAMLOCK_2_ISPLOCK(isp);
if (ccb->ccb_h.func_code == XPT_ACCEPT_TARGET_IO) {
SLIST_INSERT_HEAD(&tptr->atios,
&ccb->ccb_h, sim_links.sle);
} else {
SLIST_INSERT_HEAD(&tptr->inots, &ccb->ccb_h,
sim_links.sle);
}
rls_lun_statep(isp, tptr);
ccb->ccb_h.status = CAM_REQ_INPROG;
ISPLOCK_2_CAMLOCK(isp);
break;
}
case XPT_CONT_TARGET_IO:
{
CAMLOCK_2_ISPLOCK(isp);
ccb->ccb_h.status = isp_target_start_ctio(isp, ccb);
if (ccb->ccb_h.status != CAM_REQ_INPROG) {
if (isp->isp_osinfo.simqfrozen == 0) {
xpt_freeze_simq(sim, 1);
xpt_print_path(ccb->ccb_h.path);
isp_prt(isp, ISP_LOGINFO,
"XPT_CONT_TARGET_IO freeze simq");
}
isp->isp_osinfo.simqfrozen |= SIMQFRZ_RESOURCE;
XS_SETERR(ccb, CAM_REQUEUE_REQ);
ISPLOCK_2_CAMLOCK(isp);
xpt_done(ccb);
} else {
ISPLOCK_2_CAMLOCK(isp);
ccb->ccb_h.status |= CAM_SIM_QUEUED;
}
break;
}
#endif
case XPT_RESET_DEV: /* BDR the specified SCSI device */
bus = cam_sim_bus(xpt_path_sim(ccb->ccb_h.path));
tgt = ccb->ccb_h.target_id;
tgt |= (bus << 16);
CAMLOCK_2_ISPLOCK(isp);
error = isp_control(isp, ISPCTL_RESET_DEV, &tgt);
ISPLOCK_2_CAMLOCK(isp);
if (error) {
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
} else {
ccb->ccb_h.status = CAM_REQ_CMP;
}
xpt_done(ccb);
break;
case XPT_ABORT: /* Abort the specified CCB */
{
union ccb *accb = ccb->cab.abort_ccb;
CAMLOCK_2_ISPLOCK(isp);
switch (accb->ccb_h.func_code) {
#ifdef ISP_TARGET_MODE
case XPT_ACCEPT_TARGET_IO:
case XPT_IMMED_NOTIFY:
ccb->ccb_h.status = isp_abort_tgt_ccb(isp, ccb);
break;
case XPT_CONT_TARGET_IO:
isp_prt(isp, ISP_LOGERR, "cannot abort CTIOs yet");
ccb->ccb_h.status = CAM_UA_ABORT;
break;
#endif
case XPT_SCSI_IO:
error = isp_control(isp, ISPCTL_ABORT_CMD, ccb);
if (error) {
ccb->ccb_h.status = CAM_UA_ABORT;
} else {
ccb->ccb_h.status = CAM_REQ_CMP;
}
break;
default:
ccb->ccb_h.status = CAM_REQ_INVALID;
break;
}
ISPLOCK_2_CAMLOCK(isp);
xpt_done(ccb);
break;
}
#ifdef CAM_NEW_TRAN_CODE
#define IS_CURRENT_SETTINGS(c) (c->type == CTS_TYPE_CURRENT_SETTINGS)
#else
#define IS_CURRENT_SETTINGS(c) (c->flags & CCB_TRANS_CURRENT_SETTINGS)
#endif
case XPT_SET_TRAN_SETTINGS: /* Nexus Settings */
cts = &ccb->cts;
tgt = cts->ccb_h.target_id;
CAMLOCK_2_ISPLOCK(isp);
if (IS_SCSI(isp)) {
#ifndef CAM_NEW_TRAN_CODE
sdparam *sdp = isp->isp_param;
u_int16_t *dptr;
bus = cam_sim_bus(xpt_path_sim(cts->ccb_h.path));
sdp += bus;
/*
* We always update (internally) from dev_flags
* so any request to change settings just gets
* vectored to that location.
*/
dptr = &sdp->isp_devparam[tgt].dev_flags;
/*
* Note that these operations affect the
* the goal flags (dev_flags)- not
* the current state flags. Then we mark
* things so that the next operation to
* this HBA will cause the update to occur.
*/
if (cts->valid & CCB_TRANS_DISC_VALID) {
if ((cts->flags & CCB_TRANS_DISC_ENB) != 0) {
*dptr |= DPARM_DISC;
} else {
*dptr &= ~DPARM_DISC;
}
}
if (cts->valid & CCB_TRANS_TQ_VALID) {
if ((cts->flags & CCB_TRANS_TAG_ENB) != 0) {
*dptr |= DPARM_TQING;
} else {
*dptr &= ~DPARM_TQING;
}
}
if (cts->valid & CCB_TRANS_BUS_WIDTH_VALID) {
switch (cts->bus_width) {
case MSG_EXT_WDTR_BUS_16_BIT:
*dptr |= DPARM_WIDE;
break;
default:
*dptr &= ~DPARM_WIDE;
}
}
/*
* Any SYNC RATE of nonzero and SYNC_OFFSET
* of nonzero will cause us to go to the
* selected (from NVRAM) maximum value for
* this device. At a later point, we'll
* allow finer control.
*/
if ((cts->valid & CCB_TRANS_SYNC_RATE_VALID) &&
(cts->valid & CCB_TRANS_SYNC_OFFSET_VALID) &&
(cts->sync_offset > 0)) {
*dptr |= DPARM_SYNC;
} else {
*dptr &= ~DPARM_SYNC;
}
*dptr |= DPARM_SAFE_DFLT;
#else
struct ccb_trans_settings_scsi *scsi =
&cts->proto_specific.scsi;
struct ccb_trans_settings_spi *spi =
&cts->xport_specific.spi;
sdparam *sdp = isp->isp_param;
u_int16_t *dptr;
bus = cam_sim_bus(xpt_path_sim(cts->ccb_h.path));
sdp += bus;
/*
* We always update (internally) from dev_flags
* so any request to change settings just gets
* vectored to that location.
*/
dptr = &sdp->isp_devparam[tgt].dev_flags;
if ((spi->valid & CTS_SPI_VALID_DISC) != 0) {
if ((spi->flags & CTS_SPI_FLAGS_DISC_ENB) != 0)
*dptr |= DPARM_DISC;
else
*dptr &= ~DPARM_DISC;
}
if ((scsi->valid & CTS_SCSI_VALID_TQ) != 0) {
if ((scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0)
*dptr |= DPARM_TQING;
else
*dptr &= ~DPARM_TQING;
}
if ((spi->valid & CTS_SPI_VALID_BUS_WIDTH) != 0) {
if (spi->bus_width == MSG_EXT_WDTR_BUS_16_BIT)
*dptr |= DPARM_WIDE;
else
*dptr &= ~DPARM_WIDE;
}
/*
* XXX: FIX ME
*/
if ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) &&
(spi->valid & CTS_SPI_VALID_SYNC_RATE)) {
*dptr |= DPARM_SYNC;
isp_prt(isp, ISP_LOGDEBUG0,
"enabling synchronous mode, but ignoring "
"setting to period 0x%x offset 0x%x",
spi->sync_period, spi->sync_offset);
} else if (spi->sync_period && spi->sync_offset) {
*dptr |= DPARM_SYNC;
isp_prt(isp, ISP_LOGDEBUG0,
"enabling synchronous mode (1), but ignoring"
" setting to period 0x%x offset 0x%x",
spi->sync_period, spi->sync_offset);
} else {
*dptr &= ~DPARM_SYNC;
}
#endif
isp_prt(isp, ISP_LOGDEBUG0,
"%d.%d set %s period 0x%x offset 0x%x flags 0x%x",
bus, tgt, IS_CURRENT_SETTINGS(cts)? "current" :
"user", sdp->isp_devparam[tgt].sync_period,
sdp->isp_devparam[tgt].sync_offset,
sdp->isp_devparam[tgt].dev_flags);
sdp->isp_devparam[tgt].dev_update = 1;
isp->isp_update |= (1 << bus);
} else {
/*
* What, if anything, are we supposed to do?
*/
}
ISPLOCK_2_CAMLOCK(isp);
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
case XPT_GET_TRAN_SETTINGS:
cts = &ccb->cts;
tgt = cts->ccb_h.target_id;
CAMLOCK_2_ISPLOCK(isp);
if (IS_FC(isp)) {
#ifndef CAM_NEW_TRAN_CODE
/*
* a lot of normal SCSI things don't make sense.
*/
cts->flags = CCB_TRANS_TAG_ENB | CCB_TRANS_DISC_ENB;
cts->valid = CCB_TRANS_DISC_VALID | CCB_TRANS_TQ_VALID;
/*
* How do you measure the width of a high
* speed serial bus? Well, in bytes.
*
* Offset and period make no sense, though, so we set
* (above) a 'base' transfer speed to be gigabit.
*/
cts->bus_width = MSG_EXT_WDTR_BUS_8_BIT;
#else
fcparam *fcp = isp->isp_param;
struct ccb_trans_settings_fc *fc =
&cts->xport_specific.fc;
cts->protocol = PROTO_SCSI;
cts->protocol_version = SCSI_REV_2;
cts->transport = XPORT_FC;
cts->transport_version = 0;
fc->valid = CTS_FC_VALID_SPEED;
fc->bitrate = 100000;
if (tgt > 0 && tgt < MAX_FC_TARG) {
struct lportdb *lp = &fcp->portdb[tgt];
fc->wwnn = lp->node_wwn;
fc->wwpn = lp->port_wwn;
fc->port = lp->portid;
fc->valid |= CTS_FC_VALID_WWNN |
CTS_FC_VALID_WWPN | CTS_FC_VALID_PORT;
}
#endif
} else {
#ifdef CAM_NEW_TRAN_CODE
struct ccb_trans_settings_scsi *scsi =
&cts->proto_specific.scsi;
struct ccb_trans_settings_spi *spi =
&cts->xport_specific.spi;
#endif
sdparam *sdp = isp->isp_param;
int bus = cam_sim_bus(xpt_path_sim(cts->ccb_h.path));
u_int16_t dval, pval, oval;
sdp += bus;
if (IS_CURRENT_SETTINGS(cts)) {
sdp->isp_devparam[tgt].dev_refresh = 1;
isp->isp_update |= (1 << bus);
(void) isp_control(isp, ISPCTL_UPDATE_PARAMS,
NULL);
dval = sdp->isp_devparam[tgt].cur_dflags;
oval = sdp->isp_devparam[tgt].cur_offset;
pval = sdp->isp_devparam[tgt].cur_period;
} else {
dval = sdp->isp_devparam[tgt].dev_flags;
oval = sdp->isp_devparam[tgt].sync_offset;
pval = sdp->isp_devparam[tgt].sync_period;
}
#ifndef CAM_NEW_TRAN_CODE
cts->flags &= ~(CCB_TRANS_DISC_ENB|CCB_TRANS_TAG_ENB);
if (dval & DPARM_DISC) {
cts->flags |= CCB_TRANS_DISC_ENB;
}
if (dval & DPARM_TQING) {
cts->flags |= CCB_TRANS_TAG_ENB;
}
if (dval & DPARM_WIDE) {
cts->bus_width = MSG_EXT_WDTR_BUS_16_BIT;
} else {
cts->bus_width = MSG_EXT_WDTR_BUS_8_BIT;
}
cts->valid = CCB_TRANS_BUS_WIDTH_VALID |
CCB_TRANS_DISC_VALID | CCB_TRANS_TQ_VALID;
if ((dval & DPARM_SYNC) && oval != 0) {
cts->sync_period = pval;
cts->sync_offset = oval;
cts->valid |=
CCB_TRANS_SYNC_RATE_VALID |
CCB_TRANS_SYNC_OFFSET_VALID;
}
#else
cts->protocol = PROTO_SCSI;
cts->protocol_version = SCSI_REV_2;
cts->transport = XPORT_SPI;
cts->transport_version = 2;
scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB;
spi->flags &= ~CTS_SPI_FLAGS_DISC_ENB;
if (dval & DPARM_DISC) {
spi->flags |= CTS_SPI_FLAGS_DISC_ENB;
}
if (dval & DPARM_TQING) {
scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB;
}
if ((dval & DPARM_SYNC) && oval != 0) {
spi->sync_offset = oval;
spi->sync_period = pval;
spi->valid |= CTS_SPI_VALID_SYNC_OFFSET;
spi->valid |= CTS_SPI_VALID_SYNC_RATE;
}
spi->valid |= CTS_SPI_VALID_BUS_WIDTH;
if (dval & DPARM_WIDE) {
spi->bus_width = MSG_EXT_WDTR_BUS_16_BIT;
} else {
spi->bus_width = MSG_EXT_WDTR_BUS_8_BIT;
}
if (cts->ccb_h.target_lun != CAM_LUN_WILDCARD) {
scsi->valid = CTS_SCSI_VALID_TQ;
spi->valid |= CTS_SPI_VALID_DISC;
} else {
scsi->valid = 0;
}
#endif
isp_prt(isp, ISP_LOGDEBUG0,
"%d.%d get %s period 0x%x offset 0x%x flags 0x%x",
bus, tgt, IS_CURRENT_SETTINGS(cts)? "current" :
"user", pval, oval, dval);
}
ISPLOCK_2_CAMLOCK(isp);
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
case XPT_CALC_GEOMETRY:
{
struct ccb_calc_geometry *ccg;
u_int32_t secs_per_cylinder;
u_int32_t size_mb;
ccg = &ccb->ccg;
if (ccg->block_size == 0) {
isp_prt(isp, ISP_LOGERR,
"%d.%d XPT_CALC_GEOMETRY block size 0?",
ccg->ccb_h.target_id, ccg->ccb_h.target_lun);
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
size_mb = ccg->volume_size /((1024L * 1024L) / ccg->block_size);
if (size_mb > 1024) {
ccg->heads = 255;
ccg->secs_per_track = 63;
} else {
ccg->heads = 64;
ccg->secs_per_track = 32;
}
secs_per_cylinder = ccg->heads * ccg->secs_per_track;
ccg->cylinders = ccg->volume_size / secs_per_cylinder;
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_RESET_BUS: /* Reset the specified bus */
bus = cam_sim_bus(sim);
CAMLOCK_2_ISPLOCK(isp);
error = isp_control(isp, ISPCTL_RESET_BUS, &bus);
ISPLOCK_2_CAMLOCK(isp);
if (error)
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
else {
if (cam_sim_bus(sim) && isp->isp_path2 != NULL)
xpt_async(AC_BUS_RESET, isp->isp_path2, NULL);
else if (isp->isp_path != NULL)
xpt_async(AC_BUS_RESET, isp->isp_path, NULL);
ccb->ccb_h.status = CAM_REQ_CMP;
}
xpt_done(ccb);
break;
case XPT_TERM_IO: /* Terminate the I/O process */
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
case XPT_PATH_INQ: /* Path routing inquiry */
{
struct ccb_pathinq *cpi = &ccb->cpi;
cpi->version_num = 1;
#ifdef ISP_TARGET_MODE
cpi->target_sprt = PIT_PROCESSOR | PIT_DISCONNECT | PIT_TERM_IO;
#else
cpi->target_sprt = 0;
#endif
cpi->hba_eng_cnt = 0;
cpi->max_target = ISP_MAX_TARGETS(isp) - 1;
cpi->max_lun = ISP_MAX_LUNS(isp) - 1;
cpi->bus_id = cam_sim_bus(sim);
if (IS_FC(isp)) {
cpi->hba_misc = PIM_NOBUSRESET;
/*
* Because our loop ID can shift from time to time,
* make our initiator ID out of range of our bus.
*/
cpi->initiator_id = cpi->max_target + 1;
/*
* Set base transfer capabilities for Fibre Channel.
* Technically not correct because we don't know
* what media we're running on top of- but we'll
* look good if we always say 100MB/s.
*/
cpi->base_transfer_speed = 100000;
cpi->hba_inquiry = PI_TAG_ABLE;
#ifdef CAM_NEW_TRAN_CODE
cpi->transport = XPORT_FC;
cpi->transport_version = 0; /* WHAT'S THIS FOR? */
#endif
} else {
sdparam *sdp = isp->isp_param;
sdp += cam_sim_bus(xpt_path_sim(cpi->ccb_h.path));
cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE|PI_WIDE_16;
cpi->hba_misc = 0;
cpi->initiator_id = sdp->isp_initiator_id;
cpi->base_transfer_speed = 3300;
#ifdef CAM_NEW_TRAN_CODE
cpi->transport = XPORT_SPI;
cpi->transport_version = 2; /* WHAT'S THIS FOR? */
#endif
}
#ifdef CAM_NEW_TRAN_CODE
cpi->protocol = PROTO_SCSI;
cpi->protocol_version = SCSI_REV_2;
#endif
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
strncpy(cpi->hba_vid, "Qlogic", HBA_IDLEN);
strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
cpi->unit_number = cam_sim_unit(sim);
cpi->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
default:
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
}
#define ISPDDB (CAM_DEBUG_INFO|CAM_DEBUG_TRACE|CAM_DEBUG_CDB)
void
isp_done(struct ccb_scsiio *sccb)
{
struct ispsoftc *isp = XS_ISP(sccb);
if (XS_NOERR(sccb))
XS_SETERR(sccb, CAM_REQ_CMP);
if ((sccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP &&
(sccb->scsi_status != SCSI_STATUS_OK)) {
sccb->ccb_h.status &= ~CAM_STATUS_MASK;
if ((sccb->scsi_status == SCSI_STATUS_CHECK_COND) &&
(sccb->ccb_h.status & CAM_AUTOSNS_VALID) == 0) {
sccb->ccb_h.status |= CAM_AUTOSENSE_FAIL;
} else {
sccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR;
}
}
sccb->ccb_h.status &= ~CAM_SIM_QUEUED;
if ((sccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
if ((sccb->ccb_h.status & CAM_DEV_QFRZN) == 0) {
sccb->ccb_h.status |= CAM_DEV_QFRZN;
xpt_freeze_devq(sccb->ccb_h.path, 1);
if (sccb->scsi_status != SCSI_STATUS_OK)
isp_prt(isp, ISP_LOGDEBUG2,
"freeze devq %d.%d %x %x",
sccb->ccb_h.target_id,
sccb->ccb_h.target_lun, sccb->ccb_h.status,
sccb->scsi_status);
}
}
/*
* If we were frozen waiting resources, clear that we were frozen
* waiting for resources. If we are no longer frozen, and the devq
* isn't frozen, mark the completing CCB to have the XPT layer
* release the simq.
*/
if (isp->isp_osinfo.simqfrozen & SIMQFRZ_RESOURCE) {
isp->isp_osinfo.simqfrozen &= ~SIMQFRZ_RESOURCE;
if (isp->isp_osinfo.simqfrozen == 0) {
if ((sccb->ccb_h.status & CAM_DEV_QFRZN) == 0) {
isp_prt(isp, ISP_LOGDEBUG2,
"isp_done->relsimq");
sccb->ccb_h.status |= CAM_RELEASE_SIMQ;
} else {
isp_prt(isp, ISP_LOGDEBUG2,
"isp_done->devq frozen");
}
} else {
isp_prt(isp, ISP_LOGDEBUG2,
"isp_done -> simqfrozen = %x",
isp->isp_osinfo.simqfrozen);
}
}
if ((CAM_DEBUGGED(sccb->ccb_h.path, ISPDDB)) &&
(sccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
xpt_print_path(sccb->ccb_h.path);
isp_prt(isp, ISP_LOGINFO,
"cam completion status 0x%x", sccb->ccb_h.status);
}
XS_CMD_S_DONE(sccb);
if (XS_CMD_WDOG_P(sccb) == 0) {
untimeout(isp_watchdog, (caddr_t)sccb, sccb->ccb_h.timeout_ch);
if (XS_CMD_GRACE_P(sccb)) {
isp_prt(isp, ISP_LOGDEBUG2,
"finished command on borrowed time");
}
XS_CMD_S_CLEAR(sccb);
ISPLOCK_2_CAMLOCK(isp);
xpt_done((union ccb *) sccb);
CAMLOCK_2_ISPLOCK(isp);
}
}
int
isp_async(struct ispsoftc *isp, ispasync_t cmd, void *arg)
{
int bus, rv = 0;
switch (cmd) {
case ISPASYNC_NEW_TGT_PARAMS:
{
#ifdef CAM_NEW_TRAN_CODE
struct ccb_trans_settings_scsi *scsi;
struct ccb_trans_settings_spi *spi;
#endif
int flags, tgt;
sdparam *sdp = isp->isp_param;
struct ccb_trans_settings cts;
struct cam_path *tmppath;
bzero(&cts, sizeof (struct ccb_trans_settings));
tgt = *((int *)arg);
bus = (tgt >> 16) & 0xffff;
tgt &= 0xffff;
sdp += bus;
ISPLOCK_2_CAMLOCK(isp);
if (xpt_create_path(&tmppath, NULL,
cam_sim_path(bus? isp->isp_sim2 : isp->isp_sim),
tgt, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
CAMLOCK_2_ISPLOCK(isp);
isp_prt(isp, ISP_LOGWARN,
"isp_async cannot make temp path for %d.%d",
tgt, bus);
rv = -1;
break;
}
CAMLOCK_2_ISPLOCK(isp);
flags = sdp->isp_devparam[tgt].cur_dflags;
#ifdef CAM_NEW_TRAN_CODE
cts.type = CTS_TYPE_CURRENT_SETTINGS;
cts.protocol = PROTO_SCSI;
cts.transport = XPORT_SPI;
scsi = &cts.proto_specific.scsi;
spi = &cts.xport_specific.spi;
if (flags & DPARM_TQING) {
scsi->valid |= CTS_SCSI_VALID_TQ;
scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB;
spi->flags |= CTS_SPI_FLAGS_TAG_ENB;
}
if (flags & DPARM_DISC) {
spi->valid |= CTS_SPI_VALID_DISC;
spi->flags |= CTS_SPI_FLAGS_DISC_ENB;
}
spi->flags |= CTS_SPI_VALID_BUS_WIDTH;
if (flags & DPARM_WIDE) {
spi->bus_width = MSG_EXT_WDTR_BUS_16_BIT;
} else {
spi->bus_width = MSG_EXT_WDTR_BUS_8_BIT;
}
if (flags & DPARM_SYNC) {
spi->valid |= CTS_SPI_VALID_SYNC_RATE;
spi->valid |= CTS_SPI_VALID_SYNC_OFFSET;
spi->sync_period = sdp->isp_devparam[tgt].cur_period;
spi->sync_offset = sdp->isp_devparam[tgt].cur_offset;
}
#else
cts.flags = CCB_TRANS_CURRENT_SETTINGS;
cts.valid = CCB_TRANS_DISC_VALID | CCB_TRANS_TQ_VALID;
if (flags & DPARM_DISC) {
cts.flags |= CCB_TRANS_DISC_ENB;
}
if (flags & DPARM_TQING) {
cts.flags |= CCB_TRANS_TAG_ENB;
}
cts.valid |= CCB_TRANS_BUS_WIDTH_VALID;
cts.bus_width = (flags & DPARM_WIDE)?
MSG_EXT_WDTR_BUS_8_BIT : MSG_EXT_WDTR_BUS_16_BIT;
cts.sync_period = sdp->isp_devparam[tgt].cur_period;
cts.sync_offset = sdp->isp_devparam[tgt].cur_offset;
if (flags & DPARM_SYNC) {
cts.valid |=
CCB_TRANS_SYNC_RATE_VALID |
CCB_TRANS_SYNC_OFFSET_VALID;
}
#endif
isp_prt(isp, ISP_LOGDEBUG2,
"NEW_TGT_PARAMS bus %d tgt %d period %x offset %x flags %x",
bus, tgt, sdp->isp_devparam[tgt].cur_period,
sdp->isp_devparam[tgt].cur_offset, flags);
xpt_setup_ccb(&cts.ccb_h, tmppath, 1);
ISPLOCK_2_CAMLOCK(isp);
xpt_async(AC_TRANSFER_NEG, tmppath, &cts);
xpt_free_path(tmppath);
CAMLOCK_2_ISPLOCK(isp);
break;
}
case ISPASYNC_BUS_RESET:
bus = *((int *)arg);
isp_prt(isp, ISP_LOGINFO, "SCSI bus reset on bus %d detected",
bus);
if (bus > 0 && isp->isp_path2) {
ISPLOCK_2_CAMLOCK(isp);
xpt_async(AC_BUS_RESET, isp->isp_path2, NULL);
CAMLOCK_2_ISPLOCK(isp);
} else if (isp->isp_path) {
ISPLOCK_2_CAMLOCK(isp);
xpt_async(AC_BUS_RESET, isp->isp_path, NULL);
CAMLOCK_2_ISPLOCK(isp);
}
break;
case ISPASYNC_LIP:
if (isp->isp_path) {
if (isp->isp_osinfo.simqfrozen == 0) {
isp_prt(isp, ISP_LOGDEBUG0, "LIP freeze simq");
ISPLOCK_2_CAMLOCK(isp);
xpt_freeze_simq(isp->isp_sim, 1);
CAMLOCK_2_ISPLOCK(isp);
}
isp->isp_osinfo.simqfrozen |= SIMQFRZ_LOOPDOWN;
}
isp_prt(isp, ISP_LOGINFO, "LIP Received");
break;
case ISPASYNC_LOOP_RESET:
if (isp->isp_path) {
if (isp->isp_osinfo.simqfrozen == 0) {
isp_prt(isp, ISP_LOGDEBUG0,
"Loop Reset freeze simq");
ISPLOCK_2_CAMLOCK(isp);
xpt_freeze_simq(isp->isp_sim, 1);
CAMLOCK_2_ISPLOCK(isp);
}
isp->isp_osinfo.simqfrozen |= SIMQFRZ_LOOPDOWN;
}
isp_prt(isp, ISP_LOGINFO, "Loop Reset Received");
break;
case ISPASYNC_LOOP_DOWN:
if (isp->isp_path) {
if (isp->isp_osinfo.simqfrozen == 0) {
isp_prt(isp, ISP_LOGDEBUG0,
"loop down freeze simq");
ISPLOCK_2_CAMLOCK(isp);
xpt_freeze_simq(isp->isp_sim, 1);
CAMLOCK_2_ISPLOCK(isp);
}
isp->isp_osinfo.simqfrozen |= SIMQFRZ_LOOPDOWN;
}
isp_prt(isp, ISP_LOGINFO, "Loop DOWN");
break;
case ISPASYNC_LOOP_UP:
/*
* Now we just note that Loop has come up. We don't
* actually do anything because we're waiting for a
* Change Notify before activating the FC cleanup
* thread to look at the state of the loop again.
*/
isp_prt(isp, ISP_LOGINFO, "Loop UP");
break;
case ISPASYNC_PROMENADE:
{
struct cam_path *tmppath;
const char *fmt = "Target %d (Loop 0x%x) Port ID 0x%x "
"(role %s) %s\n Port WWN 0x%08x%08x\n Node WWN 0x%08x%08x";
static const char *roles[4] = {
"(none)", "Target", "Initiator", "Target/Initiator"
};
fcparam *fcp = isp->isp_param;
int tgt = *((int *) arg);
int is_tgt_mask = (SVC3_TGT_ROLE >> SVC3_ROLE_SHIFT);
struct lportdb *lp = &fcp->portdb[tgt];
isp_prt(isp, ISP_LOGINFO, fmt, tgt, lp->loopid, lp->portid,
roles[lp->roles & 0x3],
(lp->valid)? "Arrived" : "Departed",
(u_int32_t) (lp->port_wwn >> 32),
(u_int32_t) (lp->port_wwn & 0xffffffffLL),
(u_int32_t) (lp->node_wwn >> 32),
(u_int32_t) (lp->node_wwn & 0xffffffffLL));
ISPLOCK_2_CAMLOCK(isp);
if (xpt_create_path(&tmppath, NULL, cam_sim_path(isp->isp_sim),
(target_id_t)tgt, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
CAMLOCK_2_ISPLOCK(isp);
break;
}
/*
* Policy: only announce targets.
*/
if (lp->roles & is_tgt_mask) {
if (lp->valid) {
xpt_async(AC_FOUND_DEVICE, tmppath, NULL);
} else {
xpt_async(AC_LOST_DEVICE, tmppath, NULL);
}
}
xpt_free_path(tmppath);
CAMLOCK_2_ISPLOCK(isp);
break;
}
case ISPASYNC_CHANGE_NOTIFY:
if (arg == ISPASYNC_CHANGE_PDB) {
isp_prt(isp, ISP_LOGINFO,
"Port Database Changed");
} else if (arg == ISPASYNC_CHANGE_SNS) {
isp_prt(isp, ISP_LOGINFO,
"Name Server Database Changed");
}
cv_signal(&isp->isp_osinfo.kthread_cv);
break;
case ISPASYNC_FABRIC_DEV:
{
int target, lrange;
struct lportdb *lp = NULL;
char *pt;
sns_ganrsp_t *resp = (sns_ganrsp_t *) arg;
u_int32_t portid;
u_int64_t wwpn, wwnn;
fcparam *fcp = isp->isp_param;
portid =
(((u_int32_t) resp->snscb_port_id[0]) << 16) |
(((u_int32_t) resp->snscb_port_id[1]) << 8) |
(((u_int32_t) resp->snscb_port_id[2]));
wwpn =
(((u_int64_t)resp->snscb_portname[0]) << 56) |
(((u_int64_t)resp->snscb_portname[1]) << 48) |
(((u_int64_t)resp->snscb_portname[2]) << 40) |
(((u_int64_t)resp->snscb_portname[3]) << 32) |
(((u_int64_t)resp->snscb_portname[4]) << 24) |
(((u_int64_t)resp->snscb_portname[5]) << 16) |
(((u_int64_t)resp->snscb_portname[6]) << 8) |
(((u_int64_t)resp->snscb_portname[7]));
wwnn =
(((u_int64_t)resp->snscb_nodename[0]) << 56) |
(((u_int64_t)resp->snscb_nodename[1]) << 48) |
(((u_int64_t)resp->snscb_nodename[2]) << 40) |
(((u_int64_t)resp->snscb_nodename[3]) << 32) |
(((u_int64_t)resp->snscb_nodename[4]) << 24) |
(((u_int64_t)resp->snscb_nodename[5]) << 16) |
(((u_int64_t)resp->snscb_nodename[6]) << 8) |
(((u_int64_t)resp->snscb_nodename[7]));
if (portid == 0 || wwpn == 0) {
break;
}
switch (resp->snscb_port_type) {
case 1:
pt = " N_Port";
break;
case 2:
pt = " NL_Port";
break;
case 3:
pt = "F/NL_Port";
break;
case 0x7f:
pt = " Nx_Port";
break;
case 0x81:
pt = " F_port";
break;
case 0x82:
pt = " FL_Port";
break;
case 0x84:
pt = " E_port";
break;
default:
pt = "?";
break;
}
isp_prt(isp, ISP_LOGINFO,
"%s @ 0x%x, Node 0x%08x%08x Port %08x%08x",
pt, portid, ((u_int32_t) (wwnn >> 32)), ((u_int32_t) wwnn),
((u_int32_t) (wwpn >> 32)), ((u_int32_t) wwpn));
/*
* We're only interested in SCSI_FCP types (for now)
*/
if ((resp->snscb_fc4_types[2] & 1) == 0) {
break;
}
if (fcp->isp_topo != TOPO_F_PORT)
lrange = FC_SNS_ID+1;
else
lrange = 0;
/*
* Is it already in our list?
*/
for (target = lrange; target < MAX_FC_TARG; target++) {
if (target >= FL_PORT_ID && target <= FC_SNS_ID) {
continue;
}
lp = &fcp->portdb[target];
if (lp->port_wwn == wwpn && lp->node_wwn == wwnn) {
lp->fabric_dev = 1;
break;
}
}
if (target < MAX_FC_TARG) {
break;
}
for (target = lrange; target < MAX_FC_TARG; target++) {
if (target >= FL_PORT_ID && target <= FC_SNS_ID) {
continue;
}
lp = &fcp->portdb[target];
if (lp->port_wwn == 0) {
break;
}
}
if (target == MAX_FC_TARG) {
isp_prt(isp, ISP_LOGWARN,
"no more space for fabric devices");
break;
}
lp->node_wwn = wwnn;
lp->port_wwn = wwpn;
lp->portid = portid;
lp->fabric_dev = 1;
break;
}
#ifdef ISP_TARGET_MODE
case ISPASYNC_TARGET_MESSAGE:
{
tmd_msg_t *mp = arg;
isp_prt(isp, ISP_LOGDEBUG2,
"bus %d iid %d tgt %d lun %d ttype %x tval %x msg[0]=%x",
mp->nt_bus, (int) mp->nt_iid, (int) mp->nt_tgt,
(int) mp->nt_lun, mp->nt_tagtype, mp->nt_tagval,
mp->nt_msg[0]);
break;
}
case ISPASYNC_TARGET_EVENT:
{
tmd_event_t *ep = arg;
isp_prt(isp, ISP_LOGDEBUG2,
"bus %d event code 0x%x", ep->ev_bus, ep->ev_event);
break;
}
case ISPASYNC_TARGET_ACTION:
switch (((isphdr_t *)arg)->rqs_entry_type) {
default:
isp_prt(isp, ISP_LOGWARN,
"event 0x%x for unhandled target action",
((isphdr_t *)arg)->rqs_entry_type);
break;
case RQSTYPE_ATIO:
rv = isp_handle_platform_atio(isp, (at_entry_t *) arg);
break;
case RQSTYPE_ATIO2:
rv = isp_handle_platform_atio2(isp, (at2_entry_t *)arg);
break;
case RQSTYPE_CTIO2:
case RQSTYPE_CTIO:
rv = isp_handle_platform_ctio(isp, arg);
break;
case RQSTYPE_ENABLE_LUN:
case RQSTYPE_MODIFY_LUN:
isp_cv_signal_rqe(isp, ((lun_entry_t *)arg)->le_status);
break;
}
break;
#endif
case ISPASYNC_FW_CRASH:
{
u_int16_t mbox1, mbox6;
mbox1 = ISP_READ(isp, OUTMAILBOX1);
if (IS_DUALBUS(isp)) {
mbox6 = ISP_READ(isp, OUTMAILBOX6);
} else {
mbox6 = 0;
}
isp_prt(isp, ISP_LOGERR,
"Internal Firmware on bus %d Error @ RISC Address 0x%x",
mbox6, mbox1);
isp_reinit(isp);
break;
}
default:
isp_prt(isp, ISP_LOGERR, "unknown isp_async event %d", cmd);
rv = -1;
break;
}
return (rv);
}
/*
* Locks are held before coming here.
*/
void
isp_uninit(struct ispsoftc *isp)
{
ISP_WRITE(isp, HCCR, HCCR_CMD_RESET);
DISABLE_INTS(isp);
}
void
isp_prt(struct ispsoftc *isp, int level, const char *fmt, ...)
{
va_list ap;
if (level != ISP_LOGALL && (level & isp->isp_dblev) == 0) {
return;
}
printf("%s: ", device_get_nameunit(isp->isp_dev));
va_start(ap, fmt);
vprintf(fmt, ap);
va_end(ap);
printf("\n");
}
Reference in New Issue View Git Blame Copy Permalink