0dc34160f3
mfi, mps, mpr, mvs, my, oce, pcn, ral, rl. This only labels existing pci device tables, and has no probe / attach code changes. Reviewed by: imp, chuck Submitted by: Lakhan Shiva Kamireddy <lakhanshiva@gmail.com> Sponsored by: Google, Inc. (GSoC 2018) Approved by: re (glen)
989 lines
33 KiB
C
989 lines
33 KiB
C
/*-
|
|
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
|
|
*
|
|
* Copyright (c) 2002-2004 M. Warner Losh.
|
|
* Copyright (c) 2000-2001 Jonathan Chen.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
/*-
|
|
* Copyright (c) 1998, 1999 and 2000
|
|
* HAYAKAWA Koichi. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by HAYAKAWA Koichi.
|
|
* 4. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Driver for PCI to CardBus Bridge chips
|
|
*
|
|
* References:
|
|
* TI Datasheets:
|
|
* http://www-s.ti.com/cgi-bin/sc/generic2.cgi?family=PCI+CARDBUS+CONTROLLERS
|
|
*
|
|
* Written by Jonathan Chen <jon@freebsd.org>
|
|
* The author would like to acknowledge:
|
|
* * HAYAKAWA Koichi: Author of the NetBSD code for the same thing
|
|
* * Warner Losh: Newbus/newcard guru and author of the pccard side of things
|
|
* * YAMAMOTO Shigeru: Author of another FreeBSD cardbus driver
|
|
* * David Cross: Author of the initial ugly hack for a specific cardbus card
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/condvar.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/kthread.h>
|
|
#include <sys/bus.h>
|
|
#include <machine/bus.h>
|
|
#include <sys/rman.h>
|
|
#include <machine/resource.h>
|
|
#include <sys/module.h>
|
|
|
|
#include <dev/pci/pcireg.h>
|
|
#include <dev/pci/pcivar.h>
|
|
#include <dev/pci/pcib_private.h>
|
|
|
|
#include <dev/pccard/pccardreg.h>
|
|
#include <dev/pccard/pccardvar.h>
|
|
|
|
#include <dev/exca/excareg.h>
|
|
#include <dev/exca/excavar.h>
|
|
|
|
#include <dev/pccbb/pccbbreg.h>
|
|
#include <dev/pccbb/pccbbvar.h>
|
|
|
|
#include "power_if.h"
|
|
#include "card_if.h"
|
|
#include "pcib_if.h"
|
|
|
|
#define DPRINTF(x) do { if (cbb_debug) printf x; } while (0)
|
|
#define DEVPRINTF(x) do { if (cbb_debug) device_printf x; } while (0)
|
|
|
|
#define PCI_MASK_CONFIG(DEV,REG,MASK,SIZE) \
|
|
pci_write_config(DEV, REG, pci_read_config(DEV, REG, SIZE) MASK, SIZE)
|
|
#define PCI_MASK2_CONFIG(DEV,REG,MASK1,MASK2,SIZE) \
|
|
pci_write_config(DEV, REG, ( \
|
|
pci_read_config(DEV, REG, SIZE) MASK1) MASK2, SIZE)
|
|
|
|
static void cbb_chipinit(struct cbb_softc *sc);
|
|
static int cbb_pci_filt(void *arg);
|
|
|
|
static struct yenta_chipinfo {
|
|
uint32_t yc_id;
|
|
const char *yc_name;
|
|
int yc_chiptype;
|
|
} yc_chipsets[] = {
|
|
/* Texas Instruments chips */
|
|
{PCIC_ID_TI1031, "TI1031 PCI-PC Card Bridge", CB_TI113X},
|
|
{PCIC_ID_TI1130, "TI1130 PCI-CardBus Bridge", CB_TI113X},
|
|
{PCIC_ID_TI1131, "TI1131 PCI-CardBus Bridge", CB_TI113X},
|
|
|
|
{PCIC_ID_TI1210, "TI1210 PCI-CardBus Bridge", CB_TI12XX},
|
|
{PCIC_ID_TI1211, "TI1211 PCI-CardBus Bridge", CB_TI12XX},
|
|
{PCIC_ID_TI1220, "TI1220 PCI-CardBus Bridge", CB_TI12XX},
|
|
{PCIC_ID_TI1221, "TI1221 PCI-CardBus Bridge", CB_TI12XX},
|
|
{PCIC_ID_TI1225, "TI1225 PCI-CardBus Bridge", CB_TI12XX},
|
|
{PCIC_ID_TI1250, "TI1250 PCI-CardBus Bridge", CB_TI125X},
|
|
{PCIC_ID_TI1251, "TI1251 PCI-CardBus Bridge", CB_TI125X},
|
|
{PCIC_ID_TI1251B,"TI1251B PCI-CardBus Bridge",CB_TI125X},
|
|
{PCIC_ID_TI1260, "TI1260 PCI-CardBus Bridge", CB_TI12XX},
|
|
{PCIC_ID_TI1260B,"TI1260B PCI-CardBus Bridge",CB_TI12XX},
|
|
{PCIC_ID_TI1410, "TI1410 PCI-CardBus Bridge", CB_TI12XX},
|
|
{PCIC_ID_TI1420, "TI1420 PCI-CardBus Bridge", CB_TI12XX},
|
|
{PCIC_ID_TI1421, "TI1421 PCI-CardBus Bridge", CB_TI12XX},
|
|
{PCIC_ID_TI1450, "TI1450 PCI-CardBus Bridge", CB_TI125X}, /*SIC!*/
|
|
{PCIC_ID_TI1451, "TI1451 PCI-CardBus Bridge", CB_TI12XX},
|
|
{PCIC_ID_TI1510, "TI1510 PCI-CardBus Bridge", CB_TI12XX},
|
|
{PCIC_ID_TI1520, "TI1520 PCI-CardBus Bridge", CB_TI12XX},
|
|
{PCIC_ID_TI4410, "TI4410 PCI-CardBus Bridge", CB_TI12XX},
|
|
{PCIC_ID_TI4450, "TI4450 PCI-CardBus Bridge", CB_TI12XX},
|
|
{PCIC_ID_TI4451, "TI4451 PCI-CardBus Bridge", CB_TI12XX},
|
|
{PCIC_ID_TI4510, "TI4510 PCI-CardBus Bridge", CB_TI12XX},
|
|
{PCIC_ID_TI6411, "TI6411 PCI-CardBus Bridge", CB_TI12XX},
|
|
{PCIC_ID_TI6420, "TI6420 PCI-CardBus Bridge", CB_TI12XX},
|
|
{PCIC_ID_TI6420SC, "TI6420 PCI-CardBus Bridge", CB_TI12XX},
|
|
{PCIC_ID_TI7410, "TI7410 PCI-CardBus Bridge", CB_TI12XX},
|
|
{PCIC_ID_TI7510, "TI7510 PCI-CardBus Bridge", CB_TI12XX},
|
|
{PCIC_ID_TI7610, "TI7610 PCI-CardBus Bridge", CB_TI12XX},
|
|
{PCIC_ID_TI7610M, "TI7610 PCI-CardBus Bridge", CB_TI12XX},
|
|
{PCIC_ID_TI7610SD, "TI7610 PCI-CardBus Bridge", CB_TI12XX},
|
|
{PCIC_ID_TI7610MS, "TI7610 PCI-CardBus Bridge", CB_TI12XX},
|
|
|
|
/* ENE */
|
|
{PCIC_ID_ENE_CB710, "ENE CB710 PCI-CardBus Bridge", CB_TI12XX},
|
|
{PCIC_ID_ENE_CB720, "ENE CB720 PCI-CardBus Bridge", CB_TI12XX},
|
|
{PCIC_ID_ENE_CB1211, "ENE CB1211 PCI-CardBus Bridge", CB_TI12XX},
|
|
{PCIC_ID_ENE_CB1225, "ENE CB1225 PCI-CardBus Bridge", CB_TI12XX},
|
|
{PCIC_ID_ENE_CB1410, "ENE CB1410 PCI-CardBus Bridge", CB_TI12XX},
|
|
{PCIC_ID_ENE_CB1420, "ENE CB1420 PCI-CardBus Bridge", CB_TI12XX},
|
|
|
|
/* Ricoh chips */
|
|
{PCIC_ID_RICOH_RL5C465, "RF5C465 PCI-CardBus Bridge", CB_RF5C46X},
|
|
{PCIC_ID_RICOH_RL5C466, "RF5C466 PCI-CardBus Bridge", CB_RF5C46X},
|
|
{PCIC_ID_RICOH_RL5C475, "RF5C475 PCI-CardBus Bridge", CB_RF5C47X},
|
|
{PCIC_ID_RICOH_RL5C476, "RF5C476 PCI-CardBus Bridge", CB_RF5C47X},
|
|
{PCIC_ID_RICOH_RL5C477, "RF5C477 PCI-CardBus Bridge", CB_RF5C47X},
|
|
{PCIC_ID_RICOH_RL5C478, "RF5C478 PCI-CardBus Bridge", CB_RF5C47X},
|
|
|
|
/* Toshiba products */
|
|
{PCIC_ID_TOPIC95, "ToPIC95 PCI-CardBus Bridge", CB_TOPIC95},
|
|
{PCIC_ID_TOPIC95B, "ToPIC95B PCI-CardBus Bridge", CB_TOPIC95},
|
|
{PCIC_ID_TOPIC97, "ToPIC97 PCI-CardBus Bridge", CB_TOPIC97},
|
|
{PCIC_ID_TOPIC100, "ToPIC100 PCI-CardBus Bridge", CB_TOPIC97},
|
|
|
|
/* Cirrus Logic */
|
|
{PCIC_ID_CLPD6832, "CLPD6832 PCI-CardBus Bridge", CB_CIRRUS},
|
|
{PCIC_ID_CLPD6833, "CLPD6833 PCI-CardBus Bridge", CB_CIRRUS},
|
|
{PCIC_ID_CLPD6834, "CLPD6834 PCI-CardBus Bridge", CB_CIRRUS},
|
|
|
|
/* 02Micro */
|
|
{PCIC_ID_OZ6832, "O2Micro OZ6832/6833 PCI-CardBus Bridge", CB_O2MICRO},
|
|
{PCIC_ID_OZ6860, "O2Micro OZ6836/6860 PCI-CardBus Bridge", CB_O2MICRO},
|
|
{PCIC_ID_OZ6872, "O2Micro OZ6812/6872 PCI-CardBus Bridge", CB_O2MICRO},
|
|
{PCIC_ID_OZ6912, "O2Micro OZ6912/6972 PCI-CardBus Bridge", CB_O2MICRO},
|
|
{PCIC_ID_OZ6922, "O2Micro OZ6922 PCI-CardBus Bridge", CB_O2MICRO},
|
|
{PCIC_ID_OZ6933, "O2Micro OZ6933 PCI-CardBus Bridge", CB_O2MICRO},
|
|
{PCIC_ID_OZ711E1, "O2Micro OZ711E1 PCI-CardBus Bridge", CB_O2MICRO},
|
|
{PCIC_ID_OZ711EC1, "O2Micro OZ711EC1/M1 PCI-CardBus Bridge", CB_O2MICRO},
|
|
{PCIC_ID_OZ711E2, "O2Micro OZ711E2 PCI-CardBus Bridge", CB_O2MICRO},
|
|
{PCIC_ID_OZ711M1, "O2Micro OZ711M1 PCI-CardBus Bridge", CB_O2MICRO},
|
|
{PCIC_ID_OZ711M2, "O2Micro OZ711M2 PCI-CardBus Bridge", CB_O2MICRO},
|
|
{PCIC_ID_OZ711M3, "O2Micro OZ711M3 PCI-CardBus Bridge", CB_O2MICRO},
|
|
|
|
/* SMC */
|
|
{PCIC_ID_SMC_34C90, "SMC 34C90 PCI-CardBus Bridge", CB_CIRRUS},
|
|
|
|
/* sentinel */
|
|
{0 /* null id */, "unknown", CB_UNKNOWN},
|
|
};
|
|
|
|
/************************************************************************/
|
|
/* Probe/Attach */
|
|
/************************************************************************/
|
|
|
|
static int
|
|
cbb_chipset(uint32_t pci_id, const char **namep)
|
|
{
|
|
struct yenta_chipinfo *ycp;
|
|
|
|
for (ycp = yc_chipsets; ycp->yc_id != 0 && pci_id != ycp->yc_id; ++ycp)
|
|
continue;
|
|
if (namep != NULL)
|
|
*namep = ycp->yc_name;
|
|
return (ycp->yc_chiptype);
|
|
}
|
|
|
|
static int
|
|
cbb_pci_probe(device_t brdev)
|
|
{
|
|
const char *name;
|
|
uint32_t progif;
|
|
uint32_t baseclass;
|
|
uint32_t subclass;
|
|
|
|
/*
|
|
* Do we know that we support the chipset? If so, then we
|
|
* accept the device.
|
|
*/
|
|
if (cbb_chipset(pci_get_devid(brdev), &name) != CB_UNKNOWN) {
|
|
device_set_desc(brdev, name);
|
|
return (BUS_PROBE_DEFAULT);
|
|
}
|
|
|
|
/*
|
|
* We do support generic CardBus bridges. All that we've seen
|
|
* to date have progif 0 (the Yenta spec, and successors mandate
|
|
* this).
|
|
*/
|
|
baseclass = pci_get_class(brdev);
|
|
subclass = pci_get_subclass(brdev);
|
|
progif = pci_get_progif(brdev);
|
|
if (baseclass == PCIC_BRIDGE &&
|
|
subclass == PCIS_BRIDGE_CARDBUS && progif == 0) {
|
|
device_set_desc(brdev, "PCI-CardBus Bridge");
|
|
return (BUS_PROBE_GENERIC);
|
|
}
|
|
return (ENXIO);
|
|
}
|
|
|
|
/*
|
|
* Print out the config space
|
|
*/
|
|
static void
|
|
cbb_print_config(device_t dev)
|
|
{
|
|
int i;
|
|
|
|
device_printf(dev, "PCI Configuration space:");
|
|
for (i = 0; i < 256; i += 4) {
|
|
if (i % 16 == 0)
|
|
printf("\n 0x%02x: ", i);
|
|
printf("0x%08x ", pci_read_config(dev, i, 4));
|
|
}
|
|
printf("\n");
|
|
}
|
|
|
|
static int
|
|
cbb_pci_attach(device_t brdev)
|
|
{
|
|
#if !(defined(NEW_PCIB) && defined(PCI_RES_BUS))
|
|
static int curr_bus_number = 2; /* XXX EVILE BAD (see below) */
|
|
uint32_t pribus;
|
|
#endif
|
|
struct cbb_softc *sc = (struct cbb_softc *)device_get_softc(brdev);
|
|
struct sysctl_ctx_list *sctx;
|
|
struct sysctl_oid *soid;
|
|
int rid;
|
|
device_t parent;
|
|
|
|
parent = device_get_parent(brdev);
|
|
mtx_init(&sc->mtx, device_get_nameunit(brdev), "cbb", MTX_DEF);
|
|
sc->chipset = cbb_chipset(pci_get_devid(brdev), NULL);
|
|
sc->dev = brdev;
|
|
sc->cbdev = NULL;
|
|
sc->exca[0].pccarddev = NULL;
|
|
sc->domain = pci_get_domain(brdev);
|
|
sc->pribus = pcib_get_bus(parent);
|
|
#if defined(NEW_PCIB) && defined(PCI_RES_BUS)
|
|
pci_write_config(brdev, PCIR_PRIBUS_2, sc->pribus, 1);
|
|
pcib_setup_secbus(brdev, &sc->bus, 1);
|
|
#else
|
|
sc->bus.sec = pci_read_config(brdev, PCIR_SECBUS_2, 1);
|
|
sc->bus.sub = pci_read_config(brdev, PCIR_SUBBUS_2, 1);
|
|
#endif
|
|
SLIST_INIT(&sc->rl);
|
|
|
|
rid = CBBR_SOCKBASE;
|
|
sc->base_res = bus_alloc_resource_any(brdev, SYS_RES_MEMORY, &rid,
|
|
RF_ACTIVE);
|
|
if (!sc->base_res) {
|
|
device_printf(brdev, "Could not map register memory\n");
|
|
mtx_destroy(&sc->mtx);
|
|
return (ENOMEM);
|
|
} else {
|
|
DEVPRINTF((brdev, "Found memory at %jx\n",
|
|
rman_get_start(sc->base_res)));
|
|
}
|
|
|
|
sc->bst = rman_get_bustag(sc->base_res);
|
|
sc->bsh = rman_get_bushandle(sc->base_res);
|
|
exca_init(&sc->exca[0], brdev, sc->bst, sc->bsh, CBB_EXCA_OFFSET);
|
|
sc->exca[0].flags |= EXCA_HAS_MEMREG_WIN;
|
|
sc->exca[0].chipset = EXCA_CARDBUS;
|
|
sc->chipinit = cbb_chipinit;
|
|
sc->chipinit(sc);
|
|
|
|
/*Sysctls*/
|
|
sctx = device_get_sysctl_ctx(brdev);
|
|
soid = device_get_sysctl_tree(brdev);
|
|
SYSCTL_ADD_UINT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "domain",
|
|
CTLFLAG_RD, &sc->domain, 0, "Domain number");
|
|
SYSCTL_ADD_UINT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "pribus",
|
|
CTLFLAG_RD, &sc->pribus, 0, "Primary bus number");
|
|
SYSCTL_ADD_UINT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "secbus",
|
|
CTLFLAG_RD, &sc->bus.sec, 0, "Secondary bus number");
|
|
SYSCTL_ADD_UINT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "subbus",
|
|
CTLFLAG_RD, &sc->bus.sub, 0, "Subordinate bus number");
|
|
#if 0
|
|
SYSCTL_ADD_UINT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "memory",
|
|
CTLFLAG_RD, &sc->subbus, 0, "Memory window open");
|
|
SYSCTL_ADD_UINT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "premem",
|
|
CTLFLAG_RD, &sc->subbus, 0, "Prefetch memory window open");
|
|
SYSCTL_ADD_UINT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "io1",
|
|
CTLFLAG_RD, &sc->subbus, 0, "io range 1 open");
|
|
SYSCTL_ADD_UINT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "io2",
|
|
CTLFLAG_RD, &sc->subbus, 0, "io range 2 open");
|
|
#endif
|
|
|
|
#if !(defined(NEW_PCIB) && defined(PCI_RES_BUS))
|
|
/*
|
|
* This is a gross hack. We should be scanning the entire pci
|
|
* tree, assigning bus numbers in a way such that we (1) can
|
|
* reserve 1 extra bus just in case and (2) all sub buses
|
|
* are in an appropriate range.
|
|
*/
|
|
DEVPRINTF((brdev, "Secondary bus is %d\n", sc->bus.sec));
|
|
pribus = pci_read_config(brdev, PCIR_PRIBUS_2, 1);
|
|
if (sc->bus.sec == 0 || sc->pribus != pribus) {
|
|
if (curr_bus_number <= sc->pribus)
|
|
curr_bus_number = sc->pribus + 1;
|
|
if (pribus != sc->pribus) {
|
|
DEVPRINTF((brdev, "Setting primary bus to %d\n",
|
|
sc->pribus));
|
|
pci_write_config(brdev, PCIR_PRIBUS_2, sc->pribus, 1);
|
|
}
|
|
sc->bus.sec = curr_bus_number++;
|
|
sc->bus.sub = curr_bus_number++;
|
|
DEVPRINTF((brdev, "Secondary bus set to %d subbus %d\n",
|
|
sc->bus.sec, sc->bus.sub));
|
|
pci_write_config(brdev, PCIR_SECBUS_2, sc->bus.sec, 1);
|
|
pci_write_config(brdev, PCIR_SUBBUS_2, sc->bus.sub, 1);
|
|
}
|
|
#endif
|
|
|
|
/* attach children */
|
|
sc->cbdev = device_add_child(brdev, "cardbus", -1);
|
|
if (sc->cbdev == NULL)
|
|
DEVPRINTF((brdev, "WARNING: cannot add cardbus bus.\n"));
|
|
else if (device_probe_and_attach(sc->cbdev) != 0)
|
|
DEVPRINTF((brdev, "WARNING: cannot attach cardbus bus!\n"));
|
|
|
|
sc->exca[0].pccarddev = device_add_child(brdev, "pccard", -1);
|
|
if (sc->exca[0].pccarddev == NULL)
|
|
DEVPRINTF((brdev, "WARNING: cannot add pccard bus.\n"));
|
|
else if (device_probe_and_attach(sc->exca[0].pccarddev) != 0)
|
|
DEVPRINTF((brdev, "WARNING: cannot attach pccard bus.\n"));
|
|
|
|
/* Map and establish the interrupt. */
|
|
rid = 0;
|
|
sc->irq_res = bus_alloc_resource_any(brdev, SYS_RES_IRQ, &rid,
|
|
RF_SHAREABLE | RF_ACTIVE);
|
|
if (sc->irq_res == NULL) {
|
|
device_printf(brdev, "Unable to map IRQ...\n");
|
|
goto err;
|
|
}
|
|
|
|
if (bus_setup_intr(brdev, sc->irq_res, INTR_TYPE_AV | INTR_MPSAFE,
|
|
cbb_pci_filt, NULL, sc, &sc->intrhand)) {
|
|
device_printf(brdev, "couldn't establish interrupt\n");
|
|
goto err;
|
|
}
|
|
|
|
/* reset 16-bit pcmcia bus */
|
|
exca_clrb(&sc->exca[0], EXCA_INTR, EXCA_INTR_RESET);
|
|
|
|
/* turn off power */
|
|
cbb_power(brdev, CARD_OFF);
|
|
|
|
/* CSC Interrupt: Card detect interrupt on */
|
|
cbb_setb(sc, CBB_SOCKET_MASK, CBB_SOCKET_MASK_CD);
|
|
|
|
/* reset interrupt */
|
|
cbb_set(sc, CBB_SOCKET_EVENT, cbb_get(sc, CBB_SOCKET_EVENT));
|
|
|
|
if (bootverbose)
|
|
cbb_print_config(brdev);
|
|
|
|
/* Start the thread */
|
|
if (kproc_create(cbb_event_thread, sc, &sc->event_thread, 0, 0,
|
|
"%s event thread", device_get_nameunit(brdev))) {
|
|
device_printf(brdev, "unable to create event thread.\n");
|
|
panic("cbb_create_event_thread");
|
|
}
|
|
sc->sc_root_token = root_mount_hold(device_get_nameunit(sc->dev));
|
|
return (0);
|
|
err:
|
|
if (sc->irq_res)
|
|
bus_release_resource(brdev, SYS_RES_IRQ, 0, sc->irq_res);
|
|
if (sc->base_res) {
|
|
bus_release_resource(brdev, SYS_RES_MEMORY, CBBR_SOCKBASE,
|
|
sc->base_res);
|
|
}
|
|
mtx_destroy(&sc->mtx);
|
|
return (ENOMEM);
|
|
}
|
|
|
|
static int
|
|
cbb_pci_detach(device_t brdev)
|
|
{
|
|
#if defined(NEW_PCIB) && defined(PCI_RES_BUS)
|
|
struct cbb_softc *sc = device_get_softc(brdev);
|
|
#endif
|
|
int error;
|
|
|
|
error = cbb_detach(brdev);
|
|
#if defined(NEW_PCIB) && defined(PCI_RES_BUS)
|
|
if (error == 0)
|
|
pcib_free_secbus(brdev, &sc->bus);
|
|
#endif
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
cbb_chipinit(struct cbb_softc *sc)
|
|
{
|
|
uint32_t mux, sysctrl, reg;
|
|
|
|
/* Set CardBus latency timer */
|
|
if (pci_read_config(sc->dev, PCIR_SECLAT_2, 1) < 0x20)
|
|
pci_write_config(sc->dev, PCIR_SECLAT_2, 0x20, 1);
|
|
|
|
/* Set PCI latency timer */
|
|
if (pci_read_config(sc->dev, PCIR_LATTIMER, 1) < 0x20)
|
|
pci_write_config(sc->dev, PCIR_LATTIMER, 0x20, 1);
|
|
|
|
/* Enable DMA, memory access for this card and I/O access for children */
|
|
pci_enable_busmaster(sc->dev);
|
|
pci_enable_io(sc->dev, SYS_RES_IOPORT);
|
|
pci_enable_io(sc->dev, SYS_RES_MEMORY);
|
|
|
|
/* disable Legacy IO */
|
|
switch (sc->chipset) {
|
|
case CB_RF5C46X:
|
|
PCI_MASK_CONFIG(sc->dev, CBBR_BRIDGECTRL,
|
|
& ~(CBBM_BRIDGECTRL_RL_3E0_EN |
|
|
CBBM_BRIDGECTRL_RL_3E2_EN), 2);
|
|
break;
|
|
default:
|
|
pci_write_config(sc->dev, CBBR_LEGACY, 0x0, 4);
|
|
break;
|
|
}
|
|
|
|
/* Use PCI interrupt for interrupt routing */
|
|
PCI_MASK2_CONFIG(sc->dev, CBBR_BRIDGECTRL,
|
|
& ~(CBBM_BRIDGECTRL_MASTER_ABORT |
|
|
CBBM_BRIDGECTRL_INTR_IREQ_ISA_EN),
|
|
| CBBM_BRIDGECTRL_WRITE_POST_EN,
|
|
2);
|
|
|
|
/*
|
|
* XXX this should be a function table, ala OLDCARD. This means
|
|
* that we could more easily support ISA interrupts for pccard
|
|
* cards if we had to.
|
|
*/
|
|
switch (sc->chipset) {
|
|
case CB_TI113X:
|
|
/*
|
|
* The TI 1031, TI 1130 and TI 1131 all require another bit
|
|
* be set to enable PCI routing of interrupts, and then
|
|
* a bit for each of the CSC and Function interrupts we
|
|
* want routed.
|
|
*/
|
|
PCI_MASK_CONFIG(sc->dev, CBBR_CBCTRL,
|
|
| CBBM_CBCTRL_113X_PCI_INTR |
|
|
CBBM_CBCTRL_113X_PCI_CSC | CBBM_CBCTRL_113X_PCI_IRQ_EN,
|
|
1);
|
|
PCI_MASK_CONFIG(sc->dev, CBBR_DEVCTRL,
|
|
& ~(CBBM_DEVCTRL_INT_SERIAL |
|
|
CBBM_DEVCTRL_INT_PCI), 1);
|
|
break;
|
|
case CB_TI12XX:
|
|
/*
|
|
* Some TI 12xx (and [14][45]xx) based pci cards
|
|
* sometimes have issues with the MFUNC register not
|
|
* being initialized due to a bad EEPROM on board.
|
|
* Laptops that this matters on have this register
|
|
* properly initialized.
|
|
*
|
|
* The TI125X parts have a different register.
|
|
*
|
|
* Note: Only the lower two nibbles matter. When set
|
|
* to 0, the MFUNC{0,1} pins are GPIO, which isn't
|
|
* going to work out too well because we specifically
|
|
* program these parts to parallel interrupt signalling
|
|
* elsewhere. We preserve the upper bits of this
|
|
* register since changing them have subtle side effects
|
|
* for different variants of the card and are
|
|
* extremely difficult to exaustively test.
|
|
*
|
|
* Also, the TI 1510/1520 changed the default for the MFUNC
|
|
* register from 0x0 to 0x1000 to enable IRQSER by default.
|
|
* We want to be careful to avoid overriding that, and the
|
|
* below test will do that. Should this check prove to be
|
|
* too permissive, we should just check against 0 and 0x1000
|
|
* and not touch it otherwise.
|
|
*/
|
|
mux = pci_read_config(sc->dev, CBBR_MFUNC, 4);
|
|
sysctrl = pci_read_config(sc->dev, CBBR_SYSCTRL, 4);
|
|
if ((mux & (CBBM_MFUNC_PIN0 | CBBM_MFUNC_PIN1)) == 0) {
|
|
mux = (mux & ~CBBM_MFUNC_PIN0) |
|
|
CBBM_MFUNC_PIN0_INTA;
|
|
if ((sysctrl & CBBM_SYSCTRL_INTRTIE) == 0)
|
|
mux = (mux & ~CBBM_MFUNC_PIN1) |
|
|
CBBM_MFUNC_PIN1_INTB;
|
|
pci_write_config(sc->dev, CBBR_MFUNC, mux, 4);
|
|
}
|
|
/*FALLTHROUGH*/
|
|
case CB_TI125X:
|
|
/*
|
|
* Disable zoom video. Some machines initialize this
|
|
* improperly and exerpience has shown that this helps
|
|
* prevent strange behavior. We don't support zoom
|
|
* video anyway, so no harm can come from this.
|
|
*/
|
|
pci_write_config(sc->dev, CBBR_MMCTRL, 0, 4);
|
|
break;
|
|
case CB_O2MICRO:
|
|
/*
|
|
* Issue #1: INT# generated at the same time as
|
|
* selected ISA IRQ. When IREQ# or STSCHG# is active,
|
|
* in addition to the ISA IRQ being generated, INT#
|
|
* will also be generated at the same time.
|
|
*
|
|
* Some of the older controllers have an issue in
|
|
* which the slot's PCI INT# will be asserted whenever
|
|
* IREQ# or STSCGH# is asserted even if ExCA registers
|
|
* 03h or 05h have an ISA IRQ selected.
|
|
*
|
|
* The fix for this issue, which will work for any
|
|
* controller (old or new), is to set ExCA registers
|
|
* 3Ah (slot 0) & 7Ah (slot 1) bits 7:4 = 1010b.
|
|
* These bits are undocumented. By setting this
|
|
* register (of each slot) to '1010xxxxb' a routing of
|
|
* IREQ# to INTC# and STSCHG# to INTC# is selected.
|
|
* Since INTC# isn't connected there will be no
|
|
* unexpected PCI INT when IREQ# or STSCHG# is active.
|
|
* However, INTA# (slot 0) or INTB# (slot 1) will
|
|
* still be correctly generated if NO ISA IRQ is
|
|
* selected (ExCA regs 03h or 05h are cleared).
|
|
*/
|
|
reg = exca_getb(&sc->exca[0], EXCA_O2MICRO_CTRL_C);
|
|
reg = (reg & 0x0f) |
|
|
EXCA_O2CC_IREQ_INTC | EXCA_O2CC_STSCHG_INTC;
|
|
exca_putb(&sc->exca[0], EXCA_O2MICRO_CTRL_C, reg);
|
|
break;
|
|
case CB_TOPIC97:
|
|
/*
|
|
* Disable Zoom Video, ToPIC 97, 100.
|
|
*/
|
|
pci_write_config(sc->dev, TOPIC97_ZV_CONTROL, 0, 1);
|
|
/*
|
|
* ToPIC 97, 100
|
|
* At offset 0xa1: INTERRUPT CONTROL register
|
|
* 0x1: Turn on INT interrupts.
|
|
*/
|
|
PCI_MASK_CONFIG(sc->dev, TOPIC_INTCTRL,
|
|
| TOPIC97_INTCTRL_INTIRQSEL, 1);
|
|
/*
|
|
* ToPIC97, 100
|
|
* Need to assert support for low voltage cards
|
|
*/
|
|
exca_setb(&sc->exca[0], EXCA_TOPIC97_CTRL,
|
|
EXCA_TOPIC97_CTRL_LV_MASK);
|
|
goto topic_common;
|
|
case CB_TOPIC95:
|
|
/*
|
|
* SOCKETCTRL appears to be TOPIC 95/B specific
|
|
*/
|
|
PCI_MASK_CONFIG(sc->dev, TOPIC95_SOCKETCTRL,
|
|
| TOPIC95_SOCKETCTRL_SCR_IRQSEL, 4);
|
|
|
|
topic_common:;
|
|
/*
|
|
* At offset 0xa0: SLOT CONTROL
|
|
* 0x80 Enable CardBus Functionality
|
|
* 0x40 Enable CardBus and PC Card registers
|
|
* 0x20 Lock ID in exca regs
|
|
* 0x10 Write protect ID in config regs
|
|
* Clear the rest of the bits, which defaults the slot
|
|
* in legacy mode to 0x3e0 and offset 0. (legacy
|
|
* mode is determined elsewhere)
|
|
*/
|
|
pci_write_config(sc->dev, TOPIC_SLOTCTRL,
|
|
TOPIC_SLOTCTRL_SLOTON |
|
|
TOPIC_SLOTCTRL_SLOTEN |
|
|
TOPIC_SLOTCTRL_ID_LOCK |
|
|
TOPIC_SLOTCTRL_ID_WP, 1);
|
|
|
|
/*
|
|
* At offset 0xa3 Card Detect Control Register
|
|
* 0x80 CARDBUS enbale
|
|
* 0x01 Cleared for hardware change detect
|
|
*/
|
|
PCI_MASK2_CONFIG(sc->dev, TOPIC_CDC,
|
|
| TOPIC_CDC_CARDBUS, & ~TOPIC_CDC_SWDETECT, 4);
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Need to tell ExCA registers to CSC interrupts route via PCI
|
|
* interrupts. There are two ways to do this. One is to set
|
|
* INTR_ENABLE and the other is to set CSC to 0. Since both
|
|
* methods are mutually compatible, we do both.
|
|
*/
|
|
exca_putb(&sc->exca[0], EXCA_INTR, EXCA_INTR_ENABLE);
|
|
exca_putb(&sc->exca[0], EXCA_CSC_INTR, 0);
|
|
|
|
cbb_disable_func_intr(sc);
|
|
|
|
/* close all memory and io windows */
|
|
pci_write_config(sc->dev, CBBR_MEMBASE0, 0xffffffff, 4);
|
|
pci_write_config(sc->dev, CBBR_MEMLIMIT0, 0, 4);
|
|
pci_write_config(sc->dev, CBBR_MEMBASE1, 0xffffffff, 4);
|
|
pci_write_config(sc->dev, CBBR_MEMLIMIT1, 0, 4);
|
|
pci_write_config(sc->dev, CBBR_IOBASE0, 0xffffffff, 4);
|
|
pci_write_config(sc->dev, CBBR_IOLIMIT0, 0, 4);
|
|
pci_write_config(sc->dev, CBBR_IOBASE1, 0xffffffff, 4);
|
|
pci_write_config(sc->dev, CBBR_IOLIMIT1, 0, 4);
|
|
}
|
|
|
|
static int
|
|
cbb_route_interrupt(device_t pcib, device_t dev, int pin)
|
|
{
|
|
struct cbb_softc *sc = (struct cbb_softc *)device_get_softc(pcib);
|
|
|
|
return (rman_get_start(sc->irq_res));
|
|
}
|
|
|
|
static int
|
|
cbb_pci_shutdown(device_t brdev)
|
|
{
|
|
struct cbb_softc *sc = (struct cbb_softc *)device_get_softc(brdev);
|
|
|
|
/*
|
|
* We're about to pull the rug out from the card, so mark it as
|
|
* gone to prevent harm.
|
|
*/
|
|
sc->cardok = 0;
|
|
|
|
/*
|
|
* Place the cards in reset, turn off the interrupts and power
|
|
* down the socket.
|
|
*/
|
|
PCI_MASK_CONFIG(brdev, CBBR_BRIDGECTRL, |CBBM_BRIDGECTRL_RESET, 2);
|
|
exca_clrb(&sc->exca[0], EXCA_INTR, EXCA_INTR_RESET);
|
|
cbb_set(sc, CBB_SOCKET_MASK, 0);
|
|
cbb_set(sc, CBB_SOCKET_EVENT, 0xffffffff);
|
|
cbb_power(brdev, CARD_OFF);
|
|
|
|
/*
|
|
* For paranoia, turn off all address decoding. Really not needed,
|
|
* it seems, but it can't hurt
|
|
*/
|
|
exca_putb(&sc->exca[0], EXCA_ADDRWIN_ENABLE, 0);
|
|
pci_write_config(brdev, CBBR_MEMBASE0, 0, 4);
|
|
pci_write_config(brdev, CBBR_MEMLIMIT0, 0, 4);
|
|
pci_write_config(brdev, CBBR_MEMBASE1, 0, 4);
|
|
pci_write_config(brdev, CBBR_MEMLIMIT1, 0, 4);
|
|
pci_write_config(brdev, CBBR_IOBASE0, 0, 4);
|
|
pci_write_config(brdev, CBBR_IOLIMIT0, 0, 4);
|
|
pci_write_config(brdev, CBBR_IOBASE1, 0, 4);
|
|
pci_write_config(brdev, CBBR_IOLIMIT1, 0, 4);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
cbb_pci_filt(void *arg)
|
|
{
|
|
struct cbb_softc *sc = arg;
|
|
uint32_t sockevent;
|
|
uint8_t csc;
|
|
int retval = FILTER_STRAY;
|
|
|
|
/*
|
|
* Some chips also require us to read the old ExCA registe for card
|
|
* status change when we route CSC vis PCI. This isn't supposed to be
|
|
* required, but it clears the interrupt state on some chipsets.
|
|
* Maybe there's a setting that would obviate its need. Maybe we
|
|
* should test the status bits and deal with them, but so far we've
|
|
* not found any machines that don't also give us the socket status
|
|
* indication above.
|
|
*
|
|
* This call used to be unconditional. However, further research
|
|
* suggests that we hit this condition when the card READY interrupt
|
|
* fired. So now we only read it for 16-bit cards, and we only claim
|
|
* the interrupt if READY is set. If this still causes problems, then
|
|
* the next step would be to read this if we have a 16-bit card *OR*
|
|
* we have no card. We treat the READY signal as if it were the power
|
|
* completion signal. Some bridges may double signal things here, bit
|
|
* signalling twice should be OK since we only sleep on the powerintr
|
|
* in one place and a double wakeup would be benign there.
|
|
*/
|
|
if (sc->flags & CBB_16BIT_CARD) {
|
|
csc = exca_getb(&sc->exca[0], EXCA_CSC);
|
|
if (csc & EXCA_CSC_READY) {
|
|
atomic_add_int(&sc->powerintr, 1);
|
|
wakeup((void *)&sc->powerintr);
|
|
retval = FILTER_HANDLED;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Read the socket event. Sometimes, the theory goes, the PCI bus is
|
|
* so loaded that it cannot satisfy the read request, so we get
|
|
* garbage back from the following read. We have to filter out the
|
|
* garbage so that we don't spontaneously reset the card under high
|
|
* load. PCI isn't supposed to act like this. No doubt this is a bug
|
|
* in the PCI bridge chipset (or cbb brige) that's being used in
|
|
* certain amd64 laptops today. Work around the issue by assuming
|
|
* that any bits we don't know about being set means that we got
|
|
* garbage.
|
|
*/
|
|
sockevent = cbb_get(sc, CBB_SOCKET_EVENT);
|
|
if (sockevent != 0 && (sockevent & ~CBB_SOCKET_EVENT_VALID_MASK) == 0) {
|
|
/*
|
|
* If anything has happened to the socket, we assume that the
|
|
* card is no longer OK, and we shouldn't call its ISR. We
|
|
* set cardok as soon as we've attached the card. This helps
|
|
* in a noisy eject, which happens all too often when users
|
|
* are ejecting their PC Cards.
|
|
*
|
|
* We use this method in preference to checking to see if the
|
|
* card is still there because the check suffers from a race
|
|
* condition in the bouncing case.
|
|
*/
|
|
#define DELTA (CBB_SOCKET_MASK_CD)
|
|
if (sockevent & DELTA) {
|
|
cbb_clrb(sc, CBB_SOCKET_MASK, DELTA);
|
|
cbb_set(sc, CBB_SOCKET_EVENT, DELTA);
|
|
sc->cardok = 0;
|
|
cbb_disable_func_intr(sc);
|
|
wakeup(&sc->intrhand);
|
|
}
|
|
#undef DELTA
|
|
|
|
/*
|
|
* Wakeup anybody waiting for a power interrupt. We have to
|
|
* use atomic_add_int for wakups on other cores.
|
|
*/
|
|
if (sockevent & CBB_SOCKET_EVENT_POWER) {
|
|
cbb_clrb(sc, CBB_SOCKET_MASK, CBB_SOCKET_EVENT_POWER);
|
|
cbb_set(sc, CBB_SOCKET_EVENT, CBB_SOCKET_EVENT_POWER);
|
|
atomic_add_int(&sc->powerintr, 1);
|
|
wakeup((void *)&sc->powerintr);
|
|
}
|
|
|
|
/*
|
|
* Status change interrupts aren't presently used in the
|
|
* rest of the driver. For now, just ACK them.
|
|
*/
|
|
if (sockevent & CBB_SOCKET_EVENT_CSTS)
|
|
cbb_set(sc, CBB_SOCKET_EVENT, CBB_SOCKET_EVENT_CSTS);
|
|
retval = FILTER_HANDLED;
|
|
}
|
|
return retval;
|
|
}
|
|
|
|
#if defined(NEW_PCIB) && defined(PCI_RES_BUS)
|
|
static struct resource *
|
|
cbb_pci_alloc_resource(device_t bus, device_t child, int type, int *rid,
|
|
rman_res_t start, rman_res_t end, rman_res_t count, u_int flags)
|
|
{
|
|
struct cbb_softc *sc;
|
|
|
|
sc = device_get_softc(bus);
|
|
if (type == PCI_RES_BUS)
|
|
return (pcib_alloc_subbus(&sc->bus, child, rid, start, end,
|
|
count, flags));
|
|
return (cbb_alloc_resource(bus, child, type, rid, start, end, count,
|
|
flags));
|
|
}
|
|
|
|
static int
|
|
cbb_pci_adjust_resource(device_t bus, device_t child, int type,
|
|
struct resource *r, rman_res_t start, rman_res_t end)
|
|
{
|
|
struct cbb_softc *sc;
|
|
|
|
sc = device_get_softc(bus);
|
|
if (type == PCI_RES_BUS) {
|
|
if (!rman_is_region_manager(r, &sc->bus.rman))
|
|
return (EINVAL);
|
|
return (rman_adjust_resource(r, start, end));
|
|
}
|
|
return (bus_generic_adjust_resource(bus, child, type, r, start, end));
|
|
}
|
|
|
|
static int
|
|
cbb_pci_release_resource(device_t bus, device_t child, int type, int rid,
|
|
struct resource *r)
|
|
{
|
|
struct cbb_softc *sc;
|
|
int error;
|
|
|
|
sc = device_get_softc(bus);
|
|
if (type == PCI_RES_BUS) {
|
|
if (!rman_is_region_manager(r, &sc->bus.rman))
|
|
return (EINVAL);
|
|
if (rman_get_flags(r) & RF_ACTIVE) {
|
|
error = bus_deactivate_resource(child, type, rid, r);
|
|
if (error)
|
|
return (error);
|
|
}
|
|
return (rman_release_resource(r));
|
|
}
|
|
return (cbb_release_resource(bus, child, type, rid, r));
|
|
}
|
|
#endif
|
|
|
|
/************************************************************************/
|
|
/* PCI compat methods */
|
|
/************************************************************************/
|
|
|
|
static int
|
|
cbb_maxslots(device_t brdev)
|
|
{
|
|
return (0);
|
|
}
|
|
|
|
static uint32_t
|
|
cbb_read_config(device_t brdev, u_int b, u_int s, u_int f, u_int reg, int width)
|
|
{
|
|
/*
|
|
* Pass through to the next ppb up the chain (i.e. our grandparent).
|
|
*/
|
|
return (PCIB_READ_CONFIG(device_get_parent(device_get_parent(brdev)),
|
|
b, s, f, reg, width));
|
|
}
|
|
|
|
static void
|
|
cbb_write_config(device_t brdev, u_int b, u_int s, u_int f, u_int reg, uint32_t val,
|
|
int width)
|
|
{
|
|
/*
|
|
* Pass through to the next ppb up the chain (i.e. our grandparent).
|
|
*/
|
|
PCIB_WRITE_CONFIG(device_get_parent(device_get_parent(brdev)),
|
|
b, s, f, reg, val, width);
|
|
}
|
|
|
|
static int
|
|
cbb_pci_suspend(device_t brdev)
|
|
{
|
|
int error = 0;
|
|
struct cbb_softc *sc = device_get_softc(brdev);
|
|
|
|
error = bus_generic_suspend(brdev);
|
|
if (error != 0)
|
|
return (error);
|
|
cbb_set(sc, CBB_SOCKET_MASK, 0); /* Quiet hardware */
|
|
sc->cardok = 0; /* Card is bogus now */
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
cbb_pci_resume(device_t brdev)
|
|
{
|
|
int error = 0;
|
|
struct cbb_softc *sc = (struct cbb_softc *)device_get_softc(brdev);
|
|
uint32_t tmp;
|
|
|
|
/*
|
|
* In the APM and early ACPI era, BIOSes saved the PCI config
|
|
* registers. As chips became more complicated, that functionality moved
|
|
* into the ACPI code / tables. We must therefore, restore the settings
|
|
* we made here to make sure the device come back. Transitions to Dx
|
|
* from D0 and back to D0 cause the bridge to lose its config space, so
|
|
* all the bus mappings and such are preserved.
|
|
*
|
|
* The PCI layer handles standard PCI registers like the
|
|
* command register and BARs, but cbb-specific registers are
|
|
* handled here.
|
|
*/
|
|
sc->chipinit(sc);
|
|
|
|
/* reset interrupt -- Do we really need to do this? */
|
|
tmp = cbb_get(sc, CBB_SOCKET_EVENT);
|
|
cbb_set(sc, CBB_SOCKET_EVENT, tmp);
|
|
|
|
/* CSC Interrupt: Card detect interrupt on */
|
|
cbb_setb(sc, CBB_SOCKET_MASK, CBB_SOCKET_MASK_CD);
|
|
|
|
/* Signal the thread to wakeup. */
|
|
wakeup(&sc->intrhand);
|
|
|
|
error = bus_generic_resume(brdev);
|
|
|
|
return (error);
|
|
}
|
|
|
|
static device_method_t cbb_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, cbb_pci_probe),
|
|
DEVMETHOD(device_attach, cbb_pci_attach),
|
|
DEVMETHOD(device_detach, cbb_pci_detach),
|
|
DEVMETHOD(device_shutdown, cbb_pci_shutdown),
|
|
DEVMETHOD(device_suspend, cbb_pci_suspend),
|
|
DEVMETHOD(device_resume, cbb_pci_resume),
|
|
|
|
/* bus methods */
|
|
DEVMETHOD(bus_read_ivar, cbb_read_ivar),
|
|
DEVMETHOD(bus_write_ivar, cbb_write_ivar),
|
|
#if defined(NEW_PCIB) && defined(PCI_RES_BUS)
|
|
DEVMETHOD(bus_alloc_resource, cbb_pci_alloc_resource),
|
|
DEVMETHOD(bus_adjust_resource, cbb_pci_adjust_resource),
|
|
DEVMETHOD(bus_release_resource, cbb_pci_release_resource),
|
|
#else
|
|
DEVMETHOD(bus_alloc_resource, cbb_alloc_resource),
|
|
DEVMETHOD(bus_release_resource, cbb_release_resource),
|
|
#endif
|
|
DEVMETHOD(bus_activate_resource, cbb_activate_resource),
|
|
DEVMETHOD(bus_deactivate_resource, cbb_deactivate_resource),
|
|
DEVMETHOD(bus_driver_added, cbb_driver_added),
|
|
DEVMETHOD(bus_child_detached, cbb_child_detached),
|
|
DEVMETHOD(bus_setup_intr, cbb_setup_intr),
|
|
DEVMETHOD(bus_teardown_intr, cbb_teardown_intr),
|
|
DEVMETHOD(bus_child_present, cbb_child_present),
|
|
|
|
/* 16-bit card interface */
|
|
DEVMETHOD(card_set_res_flags, cbb_pcic_set_res_flags),
|
|
DEVMETHOD(card_set_memory_offset, cbb_pcic_set_memory_offset),
|
|
|
|
/* power interface */
|
|
DEVMETHOD(power_enable_socket, cbb_power_enable_socket),
|
|
DEVMETHOD(power_disable_socket, cbb_power_disable_socket),
|
|
|
|
/* pcib compatibility interface */
|
|
DEVMETHOD(pcib_maxslots, cbb_maxslots),
|
|
DEVMETHOD(pcib_read_config, cbb_read_config),
|
|
DEVMETHOD(pcib_write_config, cbb_write_config),
|
|
DEVMETHOD(pcib_route_interrupt, cbb_route_interrupt),
|
|
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
static driver_t cbb_driver = {
|
|
"cbb",
|
|
cbb_methods,
|
|
sizeof(struct cbb_softc)
|
|
};
|
|
|
|
DRIVER_MODULE(cbb, pci, cbb_driver, cbb_devclass, 0, 0);
|
|
MODULE_PNP_INFO("W32:vendor/device;D:#", pci, cbb, yc_chipsets,
|
|
nitems(yc_chipsets) - 1);
|
|
MODULE_DEPEND(cbb, exca, 1, 1, 1);
|